drm/amdgpu:Add DPG mode support for vcn 1.0

Add DPG mode start/stop/mc_resume/clock_gating to
support vcn 1.0 DPG mode.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:Add DPG mode read/write macro

Some registers read/write needs program through SDRAM pool under
DPG mode.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:Add DPG support flag

Add DPG support flag for VCN DPG mode.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:Add new register offset/mask to support VCN DPG mode

New register offset/mask need to be added to support VCN DPG mode.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:Use register UVD_SCRATCH9 for VCN ring/ib test

Use register UVD_SCRATCH9 for VCN ring/ib test. Since those registers
can't be directly accessed under DPG(Dynamic Power Gate) mode.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move more defines into amdgpu_irq.h

Everything that isn't related to the IH ring.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move more interrupt processing into amdgpu_irq.c

Add a callback to amdgpu_ih_process to remove most of the IV logic.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move fence SW fallback warning v3

Only print the warning if there was actually some fence processed
from the SW fallback timer.

v2: Add return value to amdgpu_fence_process to let
amdgpu_fence_fallback know fences were actually
processed and then print the warning.

v3: Always return true if seq != last_seq

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cleanup amdgpu_ih.c

Cleanup amdgpu_ih.c to be able to handle multiple interrupt rings.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: make function pointers mandatory

We always want those to be setup correctly.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop extra newline in amdgpu_iv trace

That is superflous here.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix the page fault of raven2

While the apg_end address is 0xffffffff, if add 1 with it, the value will be
overflow and roll back to 0. So when 0 is written to
mmMC_VM_SYSTEM_APERTURE_HIGH_ADDR, the system aperture is actually disabled. And
so any access to vram will trigger a page fault.

Raven2's HW issue only need increase the vram end address, and needn't do it on
the agp.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Disable dpm features on smu7/8 when suspend

Need to disable dpm features before halt rlc.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove redundant code in gfx_v8_0.c

the CG related registers have been programed in golden setting
PG register default value is 0.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hang Zhou <hang.zhou@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Halt rlc/cp in rlc_safe_mode

before halt rlc/cp, need to
1. enter rlc safe mode
2. wait rlc/cp idle

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hang Zhou <hang.zhou@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Refine function name

change function name gfx_v6/7/8/9_0_gpu_init to
gfx_v6/7/8/9_0_constants_init.
this function is just for init gfx constants such
as max pipes, render backends...

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Deactivate SW interrupt fallback in amdgpu_fence_process v2

Deactivate SW interrupt fallback when all emited fences are completed.
Also switch interrupt SW fallback message from INFO to WARN.

v2: shorten the warning message a bit and only re-activate the timer during
processing if it was already activated before. (Christian)

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Christian Konig <Christian.Koenig@amd.com>
Reviewed-and-Tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Vega20 bring up on amdkfd side

Add Vega20 device IDs, device info and enable it in KFD.

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>

drm/amdgpu: Add vega20 support on kfd probe

Add Vega20 support in amdgpu_amdkfd_device_probe.

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>

drm/amd: Interface change to support 64 bit page_table_base

amdgpu_gpuvm_get_process_page_dir should return the page table address
in the format expected by the pm4_map_process packet for all ASIC
generations.

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Make the number of SDMA queues variable

Vega20 supports 8 SDMA queues per engine

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sriov: Correct the setting about sdma doorbell offset of Vega10

Correct the format

For vega10 sriov, the sdma doorbell must be fixed as follow to keep the
same setting with host driver, or it will happen conflicts.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Doorbell assignment for 8 sdma user queue per engine

Change doorbell assignments to allow routing doorbells for 8 user
mode SDMA queues per engine.

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove unnecessary forward declaration

struct vi_sdma_mqd is defined in vi_structs.h.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add wavefront context save state retrieval ioctl

Wavefront context save data is of interest to userspace clients for
debugging static wavefront state. The MQD contains two parameters
required to parse the control stack and the control stack itself
is kept in the MQD from gfx9 onwards.

Add an ioctl to fetch the context save area and control stack offsets
and to copy the control stack to a userspace address if it is kept in
the MQD.

Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Report SDMA firmware version in the topology

Also save the version in struct kfd_dev so we only need to query
it once.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable BAD_OPCODE intr for gfx8

This enables KFD_EVENT_TYPE_HW_EXCEPTION notifications to user mode in
response to bad opcodes in a CP queue.

Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: KFD doesn't support TONGA SRIOV

KFD module doesn't support TONGA SRIOV, if init KFD module in TONGA SRIOV
environment, it will let compute ring IB test fail.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: reflect atomic support in IO link properties

Add the flags of properties according to Asic type and pcie
capabilities.

Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add warning message for INT SW fallback.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: remove fence fallback"

This reverts commit 9b0df0937a852d299fbe42a5939c9a8a4cc83c55.
This commit breaks KCQ IB test and S3 on Polaris 11.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:No action when VCN PG state is unchanged

When VCN PG state is unchanged, it is unnecessary to reset power
gate state

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove redundant null pointer check before kfree

kfree has taken the null pointer into account. hence it is safe
to remove the redundant null pointer check before kfree.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: print smc feature mask in debugfs amdgpu_pm_info

Print the enabled smc feature mask in amdgpu_pm_info for debugging.

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: implement ENABLED_SMC_FEATURES_MASK sensor for vega20

So we can query what features are enabled for debugging.

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: implement ENABLED_SMC_FEATURES_MASK sensor for vega12

So we can query what features are enabled for debugging.

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: implement ENABLED_SMC_FEATURES_MASK sensor for vega10

So we can query what features are enabled for debugging.

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add new AMDGPU_PP_SENSOR_ENABLED_SMC_FEATURES_MASK sensor

For getting the 64 bit enabled smc feature mask from vega parts.

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: add smu smc_table_manager callback for vega20

For consistency with other asics.

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: add smu smc_table_manager callback for vega12

For consistency with other asics.

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: Move vega10_enable_smc_features

to vega10_smumgr.c.  For consistency with other vega parts.

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: add get_argument callback for vega20

For consistency with other vega parts.

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Raise dispclk value for dce120 by 15%

[Why]

The DISPCLK value was previously requested to be 15% higher for all
ASICs that went through the dce110 bandwidth code path. As part of a
refactoring of dce_clocks and the dce110 set bandwidth codepath this
was removed for power saving considerations.

That change caused display corruption under certain hardware
configurations with Vega10.

[How]

The 15% DISPCLK increase is brought back but only on dce110 for now.
This is should be a temporary workaround until the root cause is sorted
out for why this occurs on Vega (or other ASICs, if reported).

Tested-by: Nick Sarnie <sarnex@gentoo.org>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix gamma not being applied

[WHY]
Previously night light forced a full update by
applying a  transfer function update regardless of if it was changed.
This logic was removed,

Now gamma surface updates are only applied when there is also a plane
info update, this does not work in cases such as using the night light
slider.

[HOW]
When moving the night light slider we will perform a full update if
the gamma has changed and there is a surface, even when the surface
has not changed. Also get stream updates in setgamma prior to
update planes and stream.

Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove mst_hotplug_work

[Why]
The work struct's schedule call was removed a while ago, making this
useless.

[How]
Remove it.

Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Guard against null stream dereference in do flip

[Why]

During suspend under some hardware configurations can result in a
series of atomic commits with a NULL stream status - which
causes a NULL pointer dereference. This should be guarded.

[How]

Exit early from the function - if we can't access the stream then
there isn't anything that can be done here.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Stereo 3D support in VSC

[Why]
Need to add strere 3D information in VSC

[How]
Update mod_build_vsc_infopacket with stereo info

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dc 3.1.67

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Steven Chiu <Steven.Chiu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: program v_update and v_ready with proper field

[WHY]
There are two different variables used to calculate v_update and v_ready,
one for validation and the other for performance parameter calculation.
Before the variable for validation was used which caused underflow on
1080edp with vsr enabled

[HOW]
program v_update and v_ready with the variables for performance parameter
calculation

Signed-off-by: Su Sung Chung <su.chung@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add color bit info to freesync infoframe

Parse the native color bit and send it to freesync module for future
use

Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add pp_smu NULL pointer check

add pp_smu NULL ptr check

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: use proper pipe_ctx index

Use link->link_index as index to pipe_ctx[] to get proper link
information instead of using index 0 to avoid potential miss matches.

Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor FPGA-specific link setup

FPGA doesn't program backend, so we don't need certain link settings
(audio stream for example).

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Return error immediately if load firmware failed

this can avoid hard hang and be useful for debug.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Honour DC's clock limits on Rv

Honour display's request for min engine clock/memory clock.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/dc: Trigger set power state task when display configuration changes

Revert "drm/amd/display: Remove call to amdgpu_pm_compute_clocks"

This reverts commit dcd473770e86517543691bdb227103d6c781cd0a.

when display configuration changes, dc need to update the changes
to powerplay, also need to trigger a power state task.
amdgpu_pm_compute_clocks is the interface to set power state task
either dpm enabled or powerplay enabled

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

BackMerge v4.19-rc5 into drm-next

Sean Paul requested an -rc5 backmerge from some sun4i fixes.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-hisilicon-next-2018-09-26' of github.com:xin3liang/linux into drm-next

- A crash fix founded in recent linux-next from John Garry
- One sparse warning fix from Souptick Joarder
- Some xxx_unref cleanup from Thomas Zimmermann

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Xinliang Liu <xinliang.liu@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/CAGd==04mXPMjVZ3=cM8r+DSQNM6zy7Anc4T2OsHjZgSsazBTPQ@mail.gmail.com

Merge tag 'du-next-20180925' of git://linuxtv.org/pinchartl/media into drm-next

R-Car DU support for the D3 and E3 SoCs (v4.20)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3289904.RCOHkcp7u8@avalon

drm/hisilicon: Replace ttm_bo_unref with ttm_bo_put

The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.

A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.

The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>

drm/hisilicon: Replace drm_dev_unref with drm_dev_put

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>

gpu/drm/hisilicon: Convert drm_atomic_helper_suspend/resume()

convert drm_atomic_helper_suspend/resume() to use
drm_mode_config_helper_suspend/resume().

Fixed one sparse warning by making hibmc_drm_interrupt
static.

Signed-off-by: Ajit Negi <ajitn.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>

drm/hisilicon: hibmc: Use HUAWEI PCI vendor ID macro

Switch to use Huawei PCI vendor ID macro from pci_ids.h file.

In addition, switch to use PCI_VDEVICE() instead of open coding.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>

drm/hisilicon: hibmc: Don't overwrite fb helper surface depth

Currently the driver overwrites the surface depth provided by the fb
helper to give an invalid bpp/surface depth combination.

This has been exposed by commit 70109354fed2 ("drm: Reject unknown legacy
bpp and depth for drm_mode_addfb ioctl"), which now causes the driver to
fail to probe.

Fix by not overwriting the surface depth.

Fixes: d1667b86795a ("drm/hisilicon/hibmc: Add support for frame buffer")
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>

drm/hisilicon: hibmc: Do not carry error code in HiBMC framebuffer pointer

In hibmc_drm_fb_create(), when the call to hibmc_framebuffer_init() fails
with error, do not store the error code in the HiBMC device frame-buffer
pointer, as this will be later checked for non-zero value in
hibmc_fbdev_destroy() when our intention is to check for a valid function
pointer.

This fixes the following crash:
[    9.699791] Unable to handle kernel NULL pointer dereference at virtual address 000000000000001a
[    9.708672] Mem abort info:
[    9.711489]   ESR = 0x96000004
[    9.714570]   Exception class = DABT (current EL), IL = 32 bits
[    9.720551]   SET = 0, FnV = 0
[    9.723631]   EA = 0, S1PTW = 0
[    9.726799] Data abort info:
[    9.729702]   ISV = 0, ISS = 0x00000004
[    9.733573]   CM = 0, WnR = 0
[    9.736566] [000000000000001a] user address but active_mm is swapper
[    9.742987] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    9.748614] Modules linked in:
[    9.751694] CPU: 16 PID: 293 Comm: kworker/16:1 Tainted: G        W         4.19.0-rc4-next-20180920-00001-g9b0012c #322
[    9.762681] Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018
[    9.771915] Workqueue: events work_for_cpu_fn
[    9.776312] pstate: 60000005 (nZCv daif -PAN -UAO)
[    9.781150] pc : drm_mode_object_put+0x0/0x20
[    9.785547] lr : hibmc_fbdev_fini+0x40/0x58
[    9.789767] sp : ffff00000af1bcf0
[    9.793108] x29: ffff00000af1bcf0 x28: 0000000000000000
[    9.798473] x27: 0000000000000000 x26: ffff000008f66630
[    9.803838] x25: 0000000000000000 x24: ffff0000095abb98
[    9.809203] x23: ffff8017db92fe00 x22: ffff8017d2b13000
[    9.814568] x21: ffffffffffffffea x20: ffff8017d2f80018
[    9.819933] x19: ffff8017d28a0018 x18: ffffffffffffffff
[    9.825297] x17: 0000000000000000 x16: 0000000000000000
[    9.830662] x15: ffff0000092296c8 x14: ffff00008939970f
[    9.836026] x13: ffff00000939971d x12: ffff000009229940
[    9.841391] x11: ffff0000085f8fc0 x10: ffff00000af1b9a0
[    9.846756] x9 : 000000000000000d x8 : 6620657a696c6169
[    9.852121] x7 : ffff8017d3340580 x6 : ffff8017d4168000
[    9.857486] x5 : 0000000000000000 x4 : ffff8017db92fb20
[    9.862850] x3 : 0000000000002690 x2 : ffff8017d3340480
[    9.868214] x1 : 0000000000000028 x0 : 0000000000000002
[    9.873580] Process kworker/16:1 (pid: 293, stack limit = 0x(____ptrval____))
[    9.880788] Call trace:
[    9.883252]  drm_mode_object_put+0x0/0x20
[    9.887297]  hibmc_unload+0x1c/0x80
[    9.890815]  hibmc_pci_probe+0x170/0x3c8
[    9.894773]  local_pci_probe+0x3c/0xb0
[    9.898555]  work_for_cpu_fn+0x18/0x28
[    9.902337]  process_one_work+0x1e0/0x318
[    9.906382]  worker_thread+0x228/0x450
[    9.910164]  kthread+0x128/0x130
[    9.913418]  ret_from_fork+0x10/0x18
[    9.917024] Code: a94153f3 a8c27bfd d65f03c0 d503201f (f9400c01)
[    9.923180] ---[ end trace 2695ffa0af5be375 ]---

Fixes: d1667b86795a ("drm/hisilicon/hibmc: Add support for frame buffer")
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>

drm: rcar-du: Add r8a77990 and r8a77995 device support

Add support for the R-Car D3 (R8A77995) and E3 (R8A77990) SoCs to the
R-Car DU driver. The two SoCs instantiate compatible DUs, so a single
information structure is enough.

Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
[Add support for R8A77990]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

drm: rcar-du: Don't use TV sync mode when not supported by the hardware

The official way to stop the display is to clear the display enable
(DEN) bit in the DSYSR register, but that operates at a group level and
affects the two channels in the group. To disable channels selectively,
the driver uses TV sync mode that stops display operation on the channel
and turns output signals into inputs.

While TV sync mode is available in all DU models currently supported,
the D3 and E3 DUs don't support it. We will thus need to find an
alternative way to turn channels off.

In the meantime, condition the switch to TV sync mode to the
availability of the feature, to avoid writing an invalid value to the
DSYSR register. When the feature is unavailable the display output will
turn blank as all planes are disabled when stopping the CRTC.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

drm: rcar-du: Cache DSYSR value to ensure known initial value

DSYSR is a DU channel register that also contains group fields. It is
thus written to by both the group and CRTC code, using read-update-write
sequences. As the register isn't initialized explicitly at startup time,
this can lead to invalid or otherwise unexpected values being written to
some of the fields if they have been modified by the firmware or just
not reset properly.

To fix this we can write a fully known value to the DSYSR register when
turning a channel's functional clock on. However, the mix of group and
channel fields complicate this. A simpler solution is to cache the
register and initialize the cached value to the desired hardware
defaults.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

drm: rcar-du: Enable configurable DPAD0 routing on Gen3

All Gen3 SoCs supported so far have a fixed association between DPAD0
and DU channels, which led to hardcoding that association when writing
the corresponding hardware register. The D3 and E3 will break that
mechanism as DPAD0 can be dynamically connected to either DU0 or DU1.

Make DPAD0 routing dynamic on Gen3. To ensure a valid hardware
configuration when the DU starts without the RGB output enabled, DPAD0
is associated at initialization time to the first DU channel that it can
be connected to. This makes no change on Gen2 as all Gen2 SoCs can
connected DPAD0 to DU0, which is the current implicit default value.

As the DPAD0 source is always 0 when a single source is possible on
Gen2, we can also simplify the Gen2 code in the same function to remove
a conditional check.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

drm: rcar-du: Use LVDS PLL clock as dot clock when possible

On selected SoCs, the DU can use the clock output by the LVDS encoder
PLL as its input dot clock. This feature is optional, but on the D3 and
E3 SoC it is often the only way to obtain a precise dot clock frequency,
as the other available clocks (CPG-generated clock and external clock)
usually have fixed rates.

Add a DU model information field to describe which DU channels can use
the LVDS PLL output clock as their input clock, and configure clock
routing accordingly.

This feature is available on H2, M2-W, M2-N, D3 and E3 SoCs, with D3 and
E3 being the primary targets. It is left disabled in this commit, and
will be enabled per-SoC after careful testing.

At the hardware level, clock routing is configured at runtime in two
steps, first selecting an internal dot clock between the LVDS PLL clock
and the external DOTCLKIN clock, and then selecting between the internal
dot clock and the CPG-generated clock. The first part requires stopping
the whole DU group in order for the change to take effect, thus causing
flickering on the screen. For this reason we currently hardcode the
clock source to the LVDS PLL clock if available, and allow flicker-free
selection of the external DOTCLKIN clock or CPG-generated clock
otherwise. A more dynamic clock selection process can be implemented
later if the need arises.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

drm: rcar-du: Perform the initial CRTC setup from rcar_du_crtc_get()

The rcar_du_crtc_get() function is always immediately followed by a call
to rcar_du_crtc_setup(). Call the later from the former to simplify the
code, and add a comment to explain how the get and put calls are
balanced.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

drm: rcar-du: lvds: D3/E3 support

The LVDS encoders in the D3 and E3 SoCs differ significantly from those
in the other R-Car Gen3 family members:

- The LVDS PLL architecture is more complex and requires computing PLL
  parameters manually.
- The PLL uses external clocks as inputs, which need to be retrieved
  from DT.
- In addition to the different PLL setup, the startup sequence has
  changed *again* (seems someone had trouble making his/her mind).

Supporting all this requires DT bindings extensions for external clocks,
brand new PLL setup code, and a few quirks to handle the differences in
the startup sequence.

The implementation doesn't support all hardware features yet, namely

- Using the LV[01] clocks generated by the CPG as PLL input.
- Providing the LVDS PLL clock to the DU for use with the RGB output.

Those features can be added later when the need will arise.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

drm: bridge: thc63: Restrict modes based on hardware operating frequency

The THC63LVD1024 is restricted to a pixel clock frequency in the range
of 8 to 135 MHz. Implement the bridge .mode_valid() operation
accordingly.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

dt-bindings: display: renesas: lvds: Add EXTAL and DU_DOTCLKIN clocks

On the D3 and E3 SoCs, the LVDS encoder can derive its internal pixel
clock from an externally supplied clock, either through the EXTAL pin or
through one of the DU_DOTCLKINx pins. Add corresponding clocks to the DT
bindings.

To retain backward compatibility with DT that don't specify the
clock-names property, the functional clock must always be specified
first, and the clock-names property is optional when only the functional
clock is specified.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

dt-bindings: display: renesas: lvds: Document r8a77990 bindings

The E3 (r8a77990) supports two LVDS channels. Extend the binding to
support them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

dt-bindings: display: renesas: du: Document r8a77990 bindings

Document the E3 (r8a77990) SoC in the R-Car DU bindings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>

Linux 4.19-rc5

Merge tag 'mfd-fixes-4.19' of git://git./linux/kernel/git/lee/mfd

Lee writes:
  "MFD fixes for v4.19
   - Fix Dialog DA9063 regulator constraints issue causing failure in
     probe
   - Fix OMAP Device Tree compatible strings to match DT"

* tag 'mfd-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: omap-usb-host: Fix dts probe of children
  mfd: da9063: Fix DT probing with constraints

Merge tag 'for-linus-4.19d-rc5-tag' of git://git./linux/kernel/git/xen/tip

Juergen writes:
  "xen:
   Two small fixes for xen drivers."

* tag 'for-linus-4.19d-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: issue warning message when out of grant maptrack entries
  xen/x86/vpmu: Zero struct pt_regs before calling into sample handling code

Merge tag 'for-linus-20180922' of git://git.kernel.dk/linux-block

Jens writes:
  "Just a single fix in this pull request, fixing a regression in
  /proc/diskstats caused by the unification of timestamps."

* tag 'for-linus-20180922' of git://git.kernel.dk/linux-block:
  block: use nanosecond resolution for iostat

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Thomas writes:
  "A set of fixes for x86:

   - Resolve the kvmclock regression on AMD systems with memory
     encryption enabled. The rework of the kvmclock memory allocation
     during early boot results in encrypted storage, which is not
     shareable with the hypervisor. Create a new section for this data
     which is mapped unencrypted and take care that the later
     allocations for shared kvmclock memory is unencrypted as well.

   - Fix the build regression in the paravirt code introduced by the
     recent spectre v2 updates.

   - Ensure that the initial static page tables cover the fixmap space
     correctly so early console always works. This worked so far by
     chance, but recent modifications to the fixmap layout can -
     depending on kernel configuration - move the relevant entries to a
     different place which is not covered by the initial static page
     tables.

   - Address the regressions and issues which got introduced with the
     recent extensions to the Intel Recource Director Technology code.

   - Update maintainer entries to document reality"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Expand static page table for fixmap space
  MAINTAINERS: Add X86 MM entry
  x86/intel_rdt: Add Reinette as co-maintainer for RDT
  MAINTAINERS: Add Borislav to the x86 maintainers
  x86/paravirt: Fix some warning messages
  x86/intel_rdt: Fix incorrect loop end condition
  x86/intel_rdt: Fix exclusive mode handling of MBA resource
  x86/intel_rdt: Fix incorrect loop end condition
  x86/intel_rdt: Do not allow pseudo-locking of MBA resource
  x86/intel_rdt: Fix unchecked MSR access
  x86/intel_rdt: Fix invalid mode warning when multiple resources are managed
  x86/intel_rdt: Global closid helper to support future fixes
  x86/intel_rdt: Fix size reporting of MBA resource
  x86/intel_rdt: Fix data type in parsing callbacks
  x86/kvm: Use __bss_decrypted attribute in shared variables
  x86/mm: Add .bss..decrypted section to hold shared variables

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Thomas writes:
  "- Provide a strerror_r wrapper so lib/bpf can be built on systems
     without _GNU_SOURCE
   - Unbreak the man page generator when building out of tree"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf Documentation: Fix out-of-tree asciidoctor man page generation
  tools lib bpf: Provide wrapper for strerror_r to build in !_GNU_SOURCE systems

Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Thomas writes:
  "Make the EFI arm stub device tree loader default on to unbreak
  existing EFI boot loaders which do not have DTB support."

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/libstub/arm: default EFI_ARMSTUB_DTB_LOADER to y

block: use nanosecond resolution for iostat

Klaus Kusche reported that the I/O busy time in /proc/diskstats was not
updating properly on 4.18. This is because we started using ktime to
track elapsed time, and we convert nanoseconds to jiffies when we update
the partition counter. However, this gets rounded down, so any I/Os that
take less than a jiffy are not accounted for. Previously in this case,
the value of jiffies would sometimes increment while we were doing I/O,
so at least some I/Os were accounted for.

Let's convert the stats to use nanoseconds internally. We still report
milliseconds as before, now more accurately than ever. The value is
still truncated to 32 bits for backwards compatibility.

Fixes: 522a777566f5 ("block: consolidate struct request timestamp fields")
Cc: stable@vger.kernel.org
Reported-by: Klaus Kusche <klaus.kusche@computerix.info>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'pinctrl-v4.19-3' of git://git./linux/kernel/git/linusw/linux-pinctrl

Linus writes:
  "Pin control fixes for v4.19:
   - Two fixes for the Intel pin controllers than cause
     problems on laptops."

* tag 'pinctrl-v4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: intel: Do pin translation in other GPIO operations as well
  pinctrl: cannonlake: Fix gpio base for GPP-E

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Paolo writes:
  "It's mostly small bugfixes and cleanups, mostly around x86 nested
   virtualization.  One important change, not related to nested
   virtualization, is that the ability for the guest kernel to trap
   CPUID instructions (in Linux that's the ARCH_SET_CPUID arch_prctl) is
   now masked by default.  This is because the feature is detected
   through an MSR; a very bad idea that Intel seems to like more and
   more.  Some applications choke if the other fields of that MSR are
   not initialized as on real hardware, hence we have to disable the
   whole MSR by default, as was the case before Linux 4.12."

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (23 commits)
  KVM: nVMX: Fix bad cleanup on error of get/set nested state IOCTLs
  kvm: selftests: Add platform_info_test
  KVM: x86: Control guest reads of MSR_PLATFORM_INFO
  KVM: x86: Turbo bits in MSR_PLATFORM_INFO
  nVMX x86: Check VPID value on vmentry of L2 guests
  nVMX x86: check posted-interrupt descriptor addresss on vmentry of L2
  KVM: nVMX: Wake blocked vCPU in guest-mode if pending interrupt in virtual APICv
  KVM: VMX: check nested state and CR4.VMXE against SMM
  kvm: x86: make kvm_{load|put}_guest_fpu() static
  x86/hyper-v: rename ipi_arg_{ex,non_ex} structures
  KVM: VMX: use preemption timer to force immediate VMExit
  KVM: VMX: modify preemption timer bit only when arming timer
  KVM: VMX: immediately mark preemption timer expired only for zero value
  KVM: SVM: Switch to bitmap_zalloc()
  KVM/MMU: Fix comment in walk_shadow_page_lockless_end()
  kvm: selftests: use -pthread instead of -lpthread
  KVM: x86: don't reset root in kvm_mmu_setup()
  kvm: mmu: Don't read PDPTEs when paging is not enabled
  x86/kvm/lapic: always disable MMIO interface in x2APIC mode
  KVM: s390: Make huge pages unavailable in ucontrol VMs
  ...

Merge tag 'upstream-4.19-rc4' of git://git.infradead.org/linux-ubifs

Richard writes:
  "This pull request contains fixes for UBIFS:
   - A wrong UBIFS assertion in mount code
   - Fix for a NULL pointer deref in mount code
   - Revert of a bad fix for xattrs"

* tag 'upstream-4.19-rc4' of git://git.infradead.org/linux-ubifs:
  Revert "ubifs: xattr: Don't operate on deleted inodes"
  ubifs: drop false positive assertion
  ubifs: Check for name being NULL while mounting

Merge tag 'for-linus-20180920' of git://git.kernel.dk/linux-block

Jens writes:
  "Storage fixes for 4.19-rc5

  - Fix for leaking kernel pointer in floppy ioctl (Andy Whitcroft)

  - NVMe pull request from Christoph, and a single ANA log page fix
    (Hannes)

  - Regression fix for libata qd32 support, where we trigger an illegal
    active command transition. This fixes a CD-ROM detection issue that
    was reported, but could also trigger premature completion of the
    internal tag (me)"

* tag 'for-linus-20180920' of git://git.kernel.dk/linux-block:
  floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctl
  libata: mask swap internal and hardware tag
  nvme: count all ANA groups for ANA Log page

Merge tag 'drm-fixes-2018-09-21' of git://anongit.freedesktop.org/drm/drm

David writes:
  "drm fixes for 4.19-rc5:

   - core: fix debugfs for atomic, fix the check for atomic for
     non-modesetting drivers
   - amdgpu: adds a new PCI id, some kfd fixes and a sdma fix
   - i915: a bunch of GVT fixes.
   - vc4: scaling fix
   - vmwgfx: modesetting fixes and a old buffer eviction fix
   - udl: framebuffer destruction fix
   - sun4i: disable on R40 fix until next kernel
   - pl111: NULL termination on table fix"

* tag 'drm-fixes-2018-09-21' of git://anongit.freedesktop.org/drm/drm: (21 commits)
  drm/amdkfd: Fix ATS capablity was not reported correctly on some APUs
  drm/amdkfd: Change the control stack MTYPE from UC to NC on GFX9
  drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7
  drm/vmwgfx: Fix buffer object eviction
  drm/vmwgfx: Don't impose STDU limits on framebuffer size
  drm/vmwgfx: limit mode size for all display unit to texture_max
  drm/vmwgfx: limit screen size to stdu_max during check_modeset
  drm/vmwgfx: don't check for old_crtc_state enable status
  drm/amdgpu: add new polaris pci id
  drm: sun4i: drop second PLL from A64 HDMI PHY
  drm: fix drm_drv_uses_atomic_modeset on non modesetting drivers.
  drm/i915/gvt: clear ggtt entries when destroy vgpu
  drm/i915/gvt: request srcu_read_lock before checking if one gfn is valid
  drm/i915/gvt: Add GEN9_CLKGATE_DIS_4 to default BXT mmio handler
  drm/i915/gvt: Init PHY related registers for BXT
  drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creation
  drm/fb-helper: Remove set but not used variable 'connector_funcs'
  drm: udl: Destroy framebuffer only if it was initialized
  drm/sun4i: Remove R40 display pipeline compatibles
  drm/pl111: Make sure of_device_id tables are NULL terminated
  ...

Merge branch 'drm-next-4.20' of git://people.freedesktop.org/~agd5f/linux into drm-next

This is a new pull for drm-next on top of last weeks with the following
changes:
- Fixed 64 bit divide
- Fixed vram type on vega20
- Misc vega20 fixes
- Misc DC fixes
- Fix GDS/GWS/OA domain handling

Previous changes from last week:
amdgpu/kfd:
- Picasso (new APU) support
- Raven2 (new APU) support
- Vega20 enablement
- ACP powergating improvements
- Add ABGR/XBGR display support
- VCN JPEG engine support
- Initial xGMI support
- Use load balancing for engine scheduling
- Lots of new documentation
- Rework and clean up i2c and aux handling in DC
- Add DP YCbCr 4:2:0 support in DC
- Add DMCU firmware loading for Raven (used for ABM and PSR)
- New debugfs features in DC
- LVDS support in DC
- Implement wave kill for gfx/compute (light weight reset for shaders)
- Use AGP aperture to avoid gart mappings when possible
- GPUVM performance improvements
- Bulk moves for more efficient GPUVM LRU handling
- Merge amdgpu and amdkfd into one module
- Enable gfxoff and stutter mode on Raven
- Misc cleanups

Scheduler:
- Load balancing support
- Bug fixes

ttm:
- Bulk move functionality
- Bug fixes

radeon:
- Misc cleanups

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920150438.12693-1-alexander.deucher@amd.com

Merge branch 'drm-fixes-4.19' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

A few fixes for 4.19:
- Add a new polaris pci id
- KFD fixes for raven and gfx7

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920155850.5455-1-alexander.deucher@amd.com

Merge branch 'vmwgfx-fixes-4.19' of git://people.freedesktop.org/~thomash/linux into drm-fixes

A couple of modesetting fixes and a fix for a long-standing buffer-eviction
problem cc'd stable.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920063935.35492-1-thellstrom@vmware.com

x86/mm: Expand static page table for fixmap space

We met a kernel panic when enabling earlycon, which is due to the fixmap
address of earlycon is not statically setup.

Currently the static fixmap setup in head_64.S only covers 2M virtual
address space, while it actually could be in 4M space with different
kernel configurations, e.g. when VSYSCALL emulation is disabled.

So increase the static space to 4M for now by defining FIXMAP_PMD_NUM to 2,
and add a build time check to ensure that the fixmap is covered by the
initial static page tables.

Fixes: 1ad83c858c7d ("x86_64,vsyscall: Make vsyscall emulation configurable")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: kernel test robot <rong.a.chen@intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com> (Xen parts)
Cc: H Peter Anvin <hpa@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180920025828.23699-1-feng.tang@intel.com

ocfs2: fix ocfs2 read block panic

While reading block, it is possible that io error return due to underlying
storage issue, in this case, BH_NeedsValidate was left in the buffer head.
Then when reading the very block next time, if it was already linked into
journal, that will trigger the following panic.

[203748.702517] kernel BUG at fs/ocfs2/buffer_head_io.c:342!
[203748.702533] invalid opcode: 0000 [#1] SMP
[203748.702561] Modules linked in: ocfs2 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc dm_switch dm_queue_length dm_multipath bonding be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i iw_cxgb4 cxgb4 cxgb3i libcxgbi iw_cxgb3 cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_devintf iTCO_wdt iTCO_vendor_support dcdbas ipmi_ssif i2c_core ipmi_si ipmi_msghandler acpi_pad pcspkr sb_edac edac_core lpc_ich mfd_core shpchp sg tg3 ptp pps_core ext4 jbd2 mbcache2 sr_mod cdrom sd_mod ahci libahci megaraid_sas wmi dm_mirror dm_region_hash dm_log dm_mod
[203748.703024] CPU: 7 PID: 38369 Comm: touch Not tainted 4.1.12-124.18.6.el6uek.x86_64 #2
[203748.703045] Hardware name: Dell Inc. PowerEdge R620/0PXXHP, BIOS 2.5.2 01/28/2015
[203748.703067] task: ffff880768139c00 ti: ffff88006ff48000 task.ti: ffff88006ff48000
[203748.703088] RIP: 0010:[<ffffffffa05e9f09>]  [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2]
[203748.703130] RSP: 0018:ffff88006ff4b818  EFLAGS: 00010206
[203748.703389] RAX: 0000000008620029 RBX: ffff88006ff4b910 RCX: 0000000000000000
[203748.703885] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000023079fe
[203748.704382] RBP: ffff88006ff4b8d8 R08: 0000000000000000 R09: ffff8807578c25b0
[203748.704877] R10: 000000000f637376 R11: 000000003030322e R12: 0000000000000000
[203748.705373] R13: ffff88006ff4b910 R14: ffff880732fe38f0 R15: 0000000000000000
[203748.705871] FS:  00007f401992c700(0000) GS:ffff880bfebc0000(0000) knlGS:0000000000000000
[203748.706370] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[203748.706627] CR2: 00007f4019252440 CR3: 00000000a621e000 CR4: 0000000000060670
[203748.707124] Stack:
[203748.707371]  ffff88006ff4b828 ffffffffa0609f52 ffff88006ff4b838 0000000000000001
[203748.707885]  0000000000000000 0000000000000000 ffff880bf67c3800 ffffffffa05eca00
[203748.708399]  00000000023079ff ffffffff81c58b80 0000000000000000 0000000000000000
[203748.708915] Call Trace:
[203748.709175]  [<ffffffffa0609f52>] ? ocfs2_inode_cache_io_unlock+0x12/0x20 [ocfs2]
[203748.709680]  [<ffffffffa05eca00>] ? ocfs2_empty_dir_filldir+0x80/0x80 [ocfs2]
[203748.710185]  [<ffffffffa05ec0cb>] ocfs2_read_dir_block_direct+0x3b/0x200 [ocfs2]
[203748.710691]  [<ffffffffa05f0fbf>] ocfs2_prepare_dx_dir_for_insert.isra.57+0x19f/0xf60 [ocfs2]
[203748.711204]  [<ffffffffa065660f>] ? ocfs2_metadata_cache_io_unlock+0x1f/0x30 [ocfs2]
[203748.711716]  [<ffffffffa05f4f3a>] ocfs2_prepare_dir_for_insert+0x13a/0x890 [ocfs2]
[203748.712227]  [<ffffffffa05f442e>] ? ocfs2_check_dir_for_entry+0x8e/0x140 [ocfs2]
[203748.712737]  [<ffffffffa061b2f2>] ocfs2_mknod+0x4b2/0x1370 [ocfs2]
[203748.713003]  [<ffffffffa061c385>] ocfs2_create+0x65/0x170 [ocfs2]
[203748.713263]  [<ffffffff8121714b>] vfs_create+0xdb/0x150
[203748.713518]  [<ffffffff8121b225>] do_last+0x815/0x1210
[203748.713772]  [<ffffffff812192e9>] ? path_init+0xb9/0x450
[203748.714123]  [<ffffffff8121bca0>] path_openat+0x80/0x600
[203748.714378]  [<ffffffff811bcd45>] ? handle_pte_fault+0xd15/0x1620
[203748.714634]  [<ffffffff8121d7ba>] do_filp_open+0x3a/0xb0
[203748.714888]  [<ffffffff8122a767>] ? __alloc_fd+0xa7/0x130
[203748.715143]  [<ffffffff81209ffc>] do_sys_open+0x12c/0x220
[203748.715403]  [<ffffffff81026ddb>] ? syscall_trace_enter_phase1+0x11b/0x180
[203748.715668]  [<ffffffff816f0c9f>] ? system_call_after_swapgs+0xe9/0x190
[203748.715928]  [<ffffffff8120a10e>] SyS_open+0x1e/0x20
[203748.716184]  [<ffffffff816f0d5e>] system_call_fastpath+0x18/0xd7
[203748.716440] Code: 00 00 48 8b 7b 08 48 83 c3 10 45 89 f8 44 89 e1 44 89 f2 4c 89 ee e8 07 06 11 e1 48 8b 03 48 85 c0 75 df 8b 5d c8 e9 4d fa ff ff <0f> 0b 48 8b 7d a0 e8 dc c6 06 00 48 b8 00 00 00 00 00 00 00 10
[203748.717505] RIP  [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2]
[203748.717775]  RSP <ffff88006ff4b818>

Joesph ever reported a similar panic.
Link: https://oss.oracle.com/pipermail/ocfs2-devel/2013-May/008931.html
Link: http://lkml.kernel.org/r/20180912063207.29484-1-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <ge.changwei@h3c.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: slowly shrink slabs with a relatively small number of objects

9092c71bb724 ("mm: use sc->priority for slab shrink targets") changed the
way that the target slab pressure is calculated and made it
priority-based:

    delta = freeable >> priority;
    delta *= 4;
    do_div(delta, shrinker->seeks);

The problem is that on a default priority (which is 12) no pressure is
applied at all, if the number of potentially reclaimable objects is less
than 4096 (1<<12).

This causes the last objects on slab caches of no longer used cgroups to
(almost) never get reclaimed.  It's obviously a waste of memory.

It can be especially painful, if these stale objects are holding a
reference to a dying cgroup.  Slab LRU lists are reparented on memcg
offlining, but corresponding objects are still holding a reference to the
dying cgroup.  If we don't scan these objects, the dying cgroup can't go
away.  Most likely, the parent cgroup hasn't any directly charged objects,
only remaining objects from dying children cgroups.  So it can easily hold
a reference to hundreds of dying cgroups.

If there are no big spikes in memory pressure, and new memory cgroups are
created and destroyed periodically, this causes the number of dying
cgroups grow steadily, causing a slow-ish and hard-to-detect memory
"leak".  It's not a real leak, as the memory can be eventually reclaimed,
but it could not happen in a real life at all.  I've seen hosts with a
steadily climbing number of dying cgroups, which doesn't show any signs of
a decline in months, despite the host is loaded with a production
workload.

It is an obvious waste of memory, and to prevent it, let's apply a minimal
pressure even on small shrinker lists.  E.g.  if there are freeable
objects, let's scan at least min(freeable, scan_batch) objects.

This fix significantly improves a chance of a dying cgroup to be
reclaimed, and together with some previous patches stops the steady growth
of the dying cgroups number on some of our hosts.

Link: http://lkml.kernel.org/r/20180905230759.12236-1-guro@fb.com
Fixes: 9092c71bb724 ("mm: use sc->priority for slab shrink targets")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/sys.c: remove duplicated include

Link: http://lkml.kernel.org/r/20180821133424.18716-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: shmem.c: Correctly annotate new inodes for lockdep

Directories and inodes don't necessarily need to be in the same lockdep
class.  For ex, hugetlbfs splits them out too to prevent false positives
in lockdep.  Annotate correctly after new inode creation.  If its a
directory inode, it will be put into a different class.

This should fix a lockdep splat reported by syzbot:

> ======================================================
> WARNING: possible circular locking dependency detected
> 4.18.0-rc8-next-20180810+ #36 Not tainted
> ------------------------------------------------------
> syz-executor900/4483 is trying to acquire lock:
> 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: inode_lock
> include/linux/fs.h:765 [inline]
> 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at:
> shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602
>
> but task is already holding lock:
> 0000000025208078 (ashmem_mutex){+.+.}, at: ashmem_shrink_scan+0xb4/0x630
> drivers/staging/android/ashmem.c:448
>
> which lock already depends on the new lock.
>
> -> #2 (ashmem_mutex){+.+.}:
>        __mutex_lock_common kernel/locking/mutex.c:925 [inline]
>        __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073
>        mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088
>        ashmem_mmap+0x55/0x520 drivers/staging/android/ashmem.c:361
>        call_mmap include/linux/fs.h:1844 [inline]
>        mmap_region+0xf27/0x1c50 mm/mmap.c:1762
>        do_mmap+0xa10/0x1220 mm/mmap.c:1535
>        do_mmap_pgoff include/linux/mm.h:2298 [inline]
>        vm_mmap_pgoff+0x213/0x2c0 mm/util.c:357
>        ksys_mmap_pgoff+0x4da/0x660 mm/mmap.c:1585
>        __do_sys_mmap arch/x86/kernel/sys_x86_64.c:100 [inline]
>        __se_sys_mmap arch/x86/kernel/sys_x86_64.c:91 [inline]
>        __x64_sys_mmap+0xe9/0x1b0 arch/x86/kernel/sys_x86_64.c:91
>        do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
>        entry_SYSCALL_64_after_hwframe+0x49/0xbe
>
> -> #1 (&mm->mmap_sem){++++}:
>        __might_fault+0x155/0x1e0 mm/memory.c:4568
>        _copy_to_user+0x30/0x110 lib/usercopy.c:25
>        copy_to_user include/linux/uaccess.h:155 [inline]
>        filldir+0x1ea/0x3a0 fs/readdir.c:196
>        dir_emit_dot include/linux/fs.h:3464 [inline]
>        dir_emit_dots include/linux/fs.h:3475 [inline]
>        dcache_readdir+0x13a/0x620 fs/libfs.c:193
>        iterate_dir+0x48b/0x5d0 fs/readdir.c:51
>        __do_sys_getdents fs/readdir.c:231 [inline]
>        __se_sys_getdents fs/readdir.c:212 [inline]
>        __x64_sys_getdents+0x29f/0x510 fs/readdir.c:212
>        do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
>        entry_SYSCALL_64_after_hwframe+0x49/0xbe
>
> -> #0 (&sb->s_type->i_mutex_key#9){++++}:
>        lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924
>        down_write+0x8f/0x130 kernel/locking/rwsem.c:70
>        inode_lock include/linux/fs.h:765 [inline]
>        shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602
>        ashmem_shrink_scan+0x236/0x630 drivers/staging/android/ashmem.c:455
>        ashmem_ioctl+0x3ae/0x13a0 drivers/staging/android/ashmem.c:797
>        vfs_ioctl fs/ioctl.c:46 [inline]
>        file_ioctl fs/ioctl.c:501 [inline]
>        do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:685
>        ksys_ioctl+0xa9/0xd0 fs/ioctl.c:702
>        __do_sys_ioctl fs/ioctl.c:709 [inline]
>        __se_sys_ioctl fs/ioctl.c:707 [inline]
>        __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:707
>        do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
>        entry_SYSCALL_64_after_hwframe+0x49/0xbe
>
> other info that might help us debug this:
>
> Chain exists of:
>   &sb->s_type->i_mutex_key#9 --> &mm->mmap_sem --> ashmem_mutex
>
>  Possible unsafe locking scenario:
>
>        CPU0                    CPU1
>        ----                    ----
>   lock(ashmem_mutex);
>                                lock(&mm->mmap_sem);
>                                lock(ashmem_mutex);
>   lock(&sb->s_type->i_mutex_key#9);
>
>  *** DEADLOCK ***
>
> 1 lock held by syz-executor900/4483:
>  #0: 0000000025208078 (ashmem_mutex){+.+.}, at:
> ashmem_shrink_scan+0xb4/0x630 drivers/staging/android/ashmem.c:448

Link: http://lkml.kernel.org/r/20180821231835.166639-1-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Suggested-by: NeilBrown <neilb@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/proc/kcore.c: fix invalid memory access in multi-page read optimization

The 'm' kcore_list item could point to kclist_head, and it is incorrect to
look at m->addr / m->size in this case.

There is no choice but to run through the list of entries for every
address if we did not find any entry in the previous iteration

Reset 'm' to NULL in that case at Omar Sandoval's suggestion.

[akpm@linux-foundation.org: add comment]
Link: http://lkml.kernel.org/r/1536100702-28706-1-git-send-email-asmadeus@codewreck.org
Fixes: bf991c2231117 ("proc/kcore: optimize multiple page reads")
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Omar Sandoval <osandov@osandov.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: James Morse <james.morse@arm.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: disable deferred struct page for 32-bit arches

Deferred struct page init is needed only on systems with large amount of
physical memory to improve boot performance.  32-bit systems do not
benefit from this feature.

Jiri reported a problem where deferred struct pages do not work well with
x86-32:

[    0.035162] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.035725] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.036269] Initializing CPU#0
[    0.036513] Initializing HighMem for node 0 (00036ffe:0007ffe0)
[    0.038459] page:f6780000 is uninitialized and poisoned
[    0.038460] raw: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[    0.039509] page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page))
[    0.040038] ------------[ cut here ]------------
[    0.040399] kernel BUG at include/linux/page-flags.h:293!
[    0.040823] invalid opcode: 0000 [#1] SMP PTI
[    0.041166] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc1_pt_jiri #9
[    0.041694] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
[    0.042496] EIP: free_highmem_page+0x64/0x80
[    0.042839] Code: 13 46 d8 c1 e8 18 5d 83 e0 03 8d 04 c0 c1 e0 06 ff 80 ec 5f 44 d8 c3 8d b4 26 00 00 00 00 ba 08 65 28 d8 89 d8 e8 fc 71 02 00 <0f> 0b 8d 76 00 8d bc 27 00 00 00 00 ba d0 b1 26 d8 89 d8 e8 e4 71
[    0.044338] EAX: 0000003c EBX: f6780000 ECX: 00000000 EDX: d856cbe8
[    0.044868] ESI: 0007ffe0 EDI: d838df20 EBP: d838df00 ESP: d838defc
[    0.045372] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210086
[    0.045913] CR0: 80050033 CR2: 00000000 CR3: 18556000 CR4: 00040690
[    0.046413] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[    0.046913] DR6: fffe0ff0 DR7: 00000400
[    0.047220] Call Trace:
[    0.047419]  add_highpages_with_active_regions+0xbd/0x10d
[    0.047854]  set_highmem_pages_init+0x5b/0x71
[    0.048202]  mem_init+0x2b/0x1e8
[    0.048460]  start_kernel+0x1d2/0x425
[    0.048757]  i386_start_kernel+0x93/0x97
[    0.049073]  startup_32_smp+0x164/0x168
[    0.049379] Modules linked in:
[    0.049626] ---[ end trace 337949378db0abbb ]---

We free highmem pages before their struct pages are initialized:

mem_init()
 set_highmem_pages_init()
  add_highpages_with_active_regions()
   free_highmem_page()
    .. Access uninitialized struct page here..

Because there is no reason to have this feature on 32-bit systems, just
disable it.

Link: http://lkml.kernel.org/r/20180831150506.31246-1-pavel.tatashin@microsoft.com
Fixes: 2e3ca40f03bb ("mm: relax deferred struct page requirements")
Signed-off-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reported-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fork: report pid exhaustion correctly

Make the clone and fork syscalls return EAGAIN when the limit on the
number of pids /proc/sys/kernel/pid_max is exceeded.

Currently, when the pid_max limit is exceeded, the kernel will return
ENOSPC from the fork and clone syscalls.  This is contrary to the
documented behaviour, which explicitly calls out the pid_max case as one
where EAGAIN should be returned.  It also leads to really confusing error
messages in userspace programs which will complain about a lack of disk
space when they fail to create processes/threads for this reason.

This error is being returned because alloc_pid() uses the idr api to find
a new pid; when there are none available, idr_alloc_cyclic() returns
-ENOSPC, and this is being propagated back to userspace.

This behaviour has been broken before, and was explicitly fixed in
commit 35f71bc0a09a ("fork: report pid reservation failure properly"),
so I think -EAGAIN is definitely the right thing to return in this case.
The current behaviour change dates from commit 95846ecf9dac ("pid:
replace pid bitmap implementation with IDR AIP") and was I believe
unintentional.

This patch has no impact on the case where allocating a pid fails because
the child reaper for the namespace is dead; that case will still return
-ENOMEM.

Link: http://lkml.kernel.org/r/20180903111016.46461-1-ktsanaktsidis@zendesk.com
Fixes: 95846ecf9dac ("pid: replace pid bitmap implementation with IDR AIP")
Signed-off-by: KJ Tsanaktsidis <ktsanaktsidis@zendesk.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Gargi Sharma <gs051095@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>