OSDN Git Service
Xi Wang [Wed, 6 Jun 2018 13:07:52 +0000 (14:07 +0100)]
net: hns3: Fix for VF mailbox receiving unknown message
Before the firmware updates the crq's tail pointer, if the VF driver
reads the data in the crq, the data may be incomplete at this time,
which will lead to the driver read an unknown message.
This patch fixes it by checking if crq is empty before reading the
message.
Fixes:
b11a0bb231f3 ("net: hns3: Add mailbox support to VF driver")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xi Wang [Wed, 6 Jun 2018 13:07:51 +0000 (14:07 +0100)]
net: hns3: Fix for VF mailbox cannot receiving PF response
When the VF frequently switches the CMDQ interrupt, if the CMDQ_SRC is not
cleared, the VF will not receive the new PF response after the interrupt
is re-enabled, the corresponding log is as follows:
[ 317.482222] hns3 0000:00:03.0: VF could not get mbx resp(=0) from PF
in 500 tries
[ 317.483137] hns3 0000:00:03.0: VF request to get tqp info from PF
failed -5
This patch fixes this problem by clearing CMDQ_SRC before enabling
interrupt and syncing pending IRQ handlers after disabling interrupt.
Fixes:
e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Wed, 6 Jun 2018 13:03:22 +0000 (15:03 +0200)]
bnx2x: use the right constant
Nearby code that also tests port suggests that the P0 constant should be
used when port is zero.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e,e1;
@@
* e ? e1 : e1
// </smpl>
Fixes:
6c3218c6f7e5 ("bnx2x: Adjust ETS to 578xx")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 6 Jun 2018 17:55:47 +0000 (13:55 -0400)]
Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
This reverts commit
d96a43c66464cdf0b249fdf47b6dcd65b83af8c0.
This potentially breaks things, so reverting as per
request by Jakub Kicinski.
Signed-off-by: David S. Miller <davem@davemloft.net>
Arun Parameswaran [Tue, 5 Jun 2018 20:38:12 +0000 (13:38 -0700)]
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
In the Broadcom Cygnus SoC, the brcm tag needs to be inserted
in between the mac address and the ether type (should use
'DSA_PROTO_TAG_BRCM') for the packets sent to the internal
b53 switch.
Since the Cygnus was added with the BCM58XX device id and the
BCM58XX uses 'DSA_PROTO_TAG_BRCM_PREPEND', the data path is
broken, due to the incorrect brcm tag location.
Add a new b53 device id (BCM583XX) for Cygnus family to fix the
issue. Add the new device id to the BCM58XX family as Cygnus
is similar to the BCM58XX in most other functionalities.
Fixes:
11606039604c ("net: dsa: b53: Support prepended Broadcom tags")
Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reported-by: Clément Péron <peron.clem@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Govindarajulu Varadarajan [Tue, 5 Jun 2018 17:14:57 +0000 (10:14 -0700)]
enic: fix UDP rss bits
In commit
48398b6e7065 ("enic: set UDP rss flag") driver needed to set a
single bit to enable UDP rss. This is changed to two bit. One for UDP
IPv4 and other bit for UDP IPv6. The hardware which supports this is not
released yet. When released, driver should set 2 bit to enable UDP rss for
both IPv4 and IPv6.
Also add spinlock around vnic_dev_capable_rss_hash_type().
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Tue, 5 Jun 2018 16:48:13 +0000 (09:48 -0700)]
netdev-FAQ: clarify DaveM's position for stable backports
Per discussion with David at netconf 2018, let's clarify
DaveM's position of handling stable backports in netdev-FAQ.
This is important for people relying on upstream -stable
releases.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 5 Jun 2018 16:25:19 +0000 (09:25 -0700)]
rtnetlink: validate attributes in do_setlink()
It seems that rtnl_group_changelink() can call do_setlink
while a prior call to validate_linkmsg(dev = NULL, ...) could
not validate IFLA_ADDRESS / IFLA_BROADCAST
Make sure do_setlink() calls validate_linkmsg() instead
of letting its callers having this responsibility.
With help from Dmitry Vyukov, thanks a lot !
BUG: KMSAN: uninit-value in is_valid_ether_addr include/linux/etherdevice.h:199 [inline]
BUG: KMSAN: uninit-value in eth_prepare_mac_addr_change net/ethernet/eth.c:275 [inline]
BUG: KMSAN: uninit-value in eth_mac_addr+0x203/0x2b0 net/ethernet/eth.c:308
CPU: 1 PID: 8695 Comm: syz-executor3 Not tainted 4.17.0-rc5+ #103
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:113
kmsan_report+0x149/0x260 mm/kmsan/kmsan.c:1084
__msan_warning_32+0x6e/0xc0 mm/kmsan/kmsan_instr.c:686
is_valid_ether_addr include/linux/etherdevice.h:199 [inline]
eth_prepare_mac_addr_change net/ethernet/eth.c:275 [inline]
eth_mac_addr+0x203/0x2b0 net/ethernet/eth.c:308
dev_set_mac_address+0x261/0x530 net/core/dev.c:7157
do_setlink+0xbc3/0x5fc0 net/core/rtnetlink.c:2317
rtnl_group_changelink net/core/rtnetlink.c:2824 [inline]
rtnl_newlink+0x1fe9/0x37a0 net/core/rtnetlink.c:2976
rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646
netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg net/socket.c:639 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
__sys_sendmsg net/socket.c:2155 [inline]
__do_sys_sendmsg net/socket.c:2164 [inline]
__se_sys_sendmsg net/socket.c:2162 [inline]
__x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x455a09
RSP: 002b:
00007fc07480ec68 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00007fc07480f6d4 RCX:
0000000000455a09
RDX:
0000000000000000 RSI:
00000000200003c0 RDI:
0000000000000014
RBP:
000000000072bea0 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00000000ffffffff
R13:
00000000000005d0 R14:
00000000006fdc20 R15:
0000000000000000
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:294 [inline]
kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:685
kmsan_memcpy_origins+0x11d/0x170 mm/kmsan/kmsan.c:527
__msan_memcpy+0x109/0x160 mm/kmsan/kmsan_instr.c:478
do_setlink+0xb84/0x5fc0 net/core/rtnetlink.c:2315
rtnl_group_changelink net/core/rtnetlink.c:2824 [inline]
rtnl_newlink+0x1fe9/0x37a0 net/core/rtnetlink.c:2976
rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646
netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg net/socket.c:639 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
__sys_sendmsg net/socket.c:2155 [inline]
__do_sys_sendmsg net/socket.c:2164 [inline]
__se_sys_sendmsg net/socket.c:2162 [inline]
__x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:189
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:315
kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan.c:322
slab_post_alloc_hook mm/slab.h:446 [inline]
slab_alloc_node mm/slub.c:2753 [inline]
__kmalloc_node_track_caller+0xb32/0x11b0 mm/slub.c:4395
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2cb/0x9e0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:988 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline]
netlink_sendmsg+0x76e/0x1350 net/netlink/af_netlink.c:1876
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg net/socket.c:639 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
__sys_sendmsg net/socket.c:2155 [inline]
__do_sys_sendmsg net/socket.c:2164 [inline]
__se_sys_sendmsg net/socket.c:2162 [inline]
__x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
e7ed828f10bd ("netlink: support setting devgroup parameters")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 5 Jun 2018 16:42:19 +0000 (12:42 -0400)]
Merge git://git./linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-06-05
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add a new BPF hook for sendmsg similar to existing hooks for bind and
connect: "This allows to override source IP (including the case when it's
set via cmsg(3)) and destination IP:port for unconnected UDP (slow path).
TCP and connected UDP (fast path) are not affected. This makes UDP support
complete, that is, connected UDP is handled by connect hooks, unconnected
by sendmsg ones.", from Andrey.
2) Rework of the AF_XDP API to allow extending it in future for type writer
model if necessary. In this mode a memory window is passed to hardware
and multiple frames might be filled into that window instead of just one
that is the case in the current fixed frame-size model. With the new
changes made this can be supported without having to add a new descriptor
format. Also, core bits for the zero-copy support for AF_XDP have been
merged as agreed upon, where i40e bits will be routed via Jeff later on.
Various improvements to documentation and sample programs included as
well, all from Björn and Magnus.
3) Given BPF's flexibility, a new program type has been added to implement
infrared decoders. Quote: "The kernel IR decoders support the most
widely used IR protocols, but there are many protocols which are not
supported. [...] There is a 'long tail' of unsupported IR protocols,
for which lircd is need to decode the IR. IR encoding is done in such
a way that some simple circuit can decode it; therefore, BPF is ideal.
[...] user-space can define a decoder in BPF, attach it to the rc
device through the lirc chardev.", from Sean.
4) Several improvements and fixes to BPF core, among others, dumping map
and prog IDs into fdinfo which is a straight forward way to correlate
BPF objects used by applications, removing an indirect call and therefore
retpoline in all map lookup/update/delete calls by invoking the callback
directly for 64 bit archs, adding a new bpf_skb_cgroup_id() BPF helper
for tc BPF programs to have an efficient way of looking up cgroup v2 id
for policy or other use cases. Fixes to make sure we zero tunnel/xfrm
state that hasn't been filled, to allow context access wrt pt_regs in
32 bit archs for tracing, and last but not least various test cases
for fixes that landed in bpf earlier, from Daniel.
5) Get rid of the ndo_xdp_flush API and extend the ndo_xdp_xmit with
a XDP_XMIT_FLUSH flag instead which allows to avoid one indirect
call as flushing is now merged directly into ndo_xdp_xmit(), from Jesper.
6) Add a new bpf_get_current_cgroup_id() helper that can be used in
tracing to retrieve the cgroup id from the current process in order
to allow for e.g. aggregation of container-level events, from Yonghong.
7) Two follow-up fixes for BTF to reject invalid input values and
related to that also two test cases for BPF kselftests, from Martin.
8) Various API improvements to the bpf_fib_lookup() helper, that is,
dropping MPLS bits which are not fully hashed out yet, rejecting
invalid helper flags, returning error for unsupported address
families as well as renaming flowlabel to flowinfo, from David.
9) Various fixes and improvements to sockmap BPF kselftests in particular
in proper error detection and data verification, from Prashant.
10) Two arm32 BPF JIT improvements. One is to fix imm range check with
regards to whether immediate fits into 24 bits, and a naming cleanup
to get functions related to rsh handling consistent to those handling
lsh, from Wang.
11) Two compile warning fixes in BPF, one for BTF and a false positive
to silent gcc in stack_map_get_build_id_offset(), from Arnd.
12) Add missing seg6.h header into tools include infrastructure in order
to fix compilation of BPF kselftests, from Mathieu.
13) Several formatting cleanups in the BPF UAPI helper description that
also fix an error during rst2man compilation, from Quentin.
14) Hide an unused variable in sk_msg_convert_ctx_access() when IPv6 is
not built into the kernel, from Yue.
15) Remove a useless double assignment in dev_map_enqueue(), from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 5 Jun 2018 16:32:40 +0000 (12:32 -0400)]
Merge branch 'devlink-extack'
David Ahern says:
====================
devlink: Add extack messages for reload and port split/unsplit
Patch 1 adds extack arg to reload, port_split and port_unsplit devlink
operations.
Patch 2 adds extack messages for reload operation in netdevsim.
Patch 3 adds extack messages to port split/unsplit in mlxsw driver.
v2
- make the extack messages align with existing dev_err
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 5 Jun 2018 15:14:11 +0000 (08:14 -0700)]
mlxsw: Add extack messages for port_{un, }split failures
Return messages in extack for port split/unsplit errors. e.g.,
$ devlink port split swp1s1 count 4
Error: mlxsw_spectrum: Port cannot be split further.
devlink answers: Invalid argument
$ devlink port unsplit swp4
Error: mlxsw_spectrum: Port was not split.
devlink answers: Invalid argument
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 5 Jun 2018 15:14:10 +0000 (08:14 -0700)]
netdevsim: Add extack error message for devlink reload
devlink reset command can fail if a FIB resource limit is set to a value
lower than the current occupancy. Return a proper message indicating the
reason for the failure.
$ devlink resource sh netdevsim/netdevsim0
netdevsim/netdevsim0:
name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none
resources:
name fib size unlimited occ 43 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none
name fib-rules size unlimited occ 4 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none
name IPv6 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none
resources:
name fib size unlimited occ 54 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none
name fib-rules size unlimited occ 3 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none
$ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 40
$ devlink dev reload netdevsim/netdevsim0
Error: netdevsim: New size is less than current occupancy.
devlink answers: Invalid argument
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 5 Jun 2018 15:14:09 +0000 (08:14 -0700)]
devlink: Add extack to reload and port_{un, }split operations
Add extack argument to reload, port_split and port_unsplit operations.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 5 Jun 2018 13:06:19 +0000 (06:06 -0700)]
net: metrics: add proper netlink validation
Before using nla_get_u32(), better make sure the attribute
is of the proper size.
Code recently was changed, but bug has been there from beginning
of git.
BUG: KMSAN: uninit-value in rtnetlink_put_metrics+0x553/0x960 net/core/rtnetlink.c:746
CPU: 1 PID: 14139 Comm: syz-executor6 Not tainted 4.17.0-rc5+ #103
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:113
kmsan_report+0x149/0x260 mm/kmsan/kmsan.c:1084
__msan_warning_32+0x6e/0xc0 mm/kmsan/kmsan_instr.c:686
rtnetlink_put_metrics+0x553/0x960 net/core/rtnetlink.c:746
fib_dump_info+0xc42/0x2190 net/ipv4/fib_semantics.c:1361
rtmsg_fib+0x65f/0x8c0 net/ipv4/fib_semantics.c:419
fib_table_insert+0x2314/0x2b50 net/ipv4/fib_trie.c:1287
inet_rtm_newroute+0x210/0x340 net/ipv4/fib_frontend.c:779
rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646
netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg net/socket.c:639 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
__sys_sendmsg net/socket.c:2155 [inline]
__do_sys_sendmsg net/socket.c:2164 [inline]
__se_sys_sendmsg net/socket.c:2162 [inline]
__x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x455a09
RSP: 002b:
00007faae5fd8c68 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00007faae5fd96d4 RCX:
0000000000455a09
RDX:
0000000000000000 RSI:
0000000020000000 RDI:
0000000000000013
RBP:
000000000072bea0 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00000000ffffffff
R13:
00000000000005d0 R14:
00000000006fdc20 R15:
0000000000000000
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:294 [inline]
kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:685
__msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:529
fib_convert_metrics net/ipv4/fib_semantics.c:1056 [inline]
fib_create_info+0x2d46/0x9dc0 net/ipv4/fib_semantics.c:1150
fib_table_insert+0x3e4/0x2b50 net/ipv4/fib_trie.c:1146
inet_rtm_newroute+0x210/0x340 net/ipv4/fib_frontend.c:779
rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646
netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg net/socket.c:639 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
__sys_sendmsg net/socket.c:2155 [inline]
__do_sys_sendmsg net/socket.c:2164 [inline]
__se_sys_sendmsg net/socket.c:2162 [inline]
__x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:189
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:315
kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan.c:322
slab_post_alloc_hook mm/slab.h:446 [inline]
slab_alloc_node mm/slub.c:2753 [inline]
__kmalloc_node_track_caller+0xb32/0x11b0 mm/slub.c:4395
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2cb/0x9e0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:988 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline]
netlink_sendmsg+0x76e/0x1350 net/netlink/af_netlink.c:1876
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg net/socket.c:639 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
__sys_sendmsg net/socket.c:2155 [inline]
__do_sys_sendmsg net/socket.c:2164 [inline]
__se_sys_sendmsg net/socket.c:2162 [inline]
__x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
a919525ad832 ("net: Move fib_convert_metrics to metrics file")
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Tue, 5 Jun 2018 13:02:00 +0000 (15:02 +0200)]
ipmr: fix error path when ipmr_new_table fails
commit
0bbbf0e7d0e7 ("ipmr, ip6mr: Unite creation of new mr_table")
refactored ipmr_new_table, so that it now returns NULL when
mr_table_alloc fails. Unfortunately, all callers of ipmr_new_table
expect an ERR_PTR.
This can result in NULL deref, for example when ipmr_rules_exit calls
ipmr_free_table with NULL net->ipv4.mrt in the
!CONFIG_IP_MROUTE_MULTIPLE_TABLES version.
This patch makes mr_table_alloc return errors, and changes
ip6mr_new_table and its callers to return/expect error pointers as
well. It also removes the version of mr_table_alloc defined under
!CONFIG_IP_MROUTE_COMMON, since it is never used.
Fixes:
0bbbf0e7d0e7 ("ipmr, ip6mr: Unite creation of new mr_table")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Tue, 5 Jun 2018 13:01:59 +0000 (15:01 +0200)]
ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
Currently, raw6_sk(sk)->ip6mr_table is set unconditionally during
ip6_mroute_setsockopt(MRT6_TABLE). A subsequent attempt at the same
setsockopt will fail with -ENOENT, since we haven't actually created
that table.
A similar fix for ipv4 was included in commit
5e1859fbcc3c ("ipv4: ipmr:
various fixes and cleanups").
Fixes:
d1db275dd3f6 ("ipv6: ip6mr: support multiple tables")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Tue, 5 Jun 2018 11:38:21 +0000 (13:38 +0200)]
net: hns3: remove unused hclgevf_cfg_func_mta_filter
The last patch apparently added a complete replacement for this
function, but left the old one in place, which now causes a
harmless warning:
drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c:731:12: 'hclgevf_cfg_func_mta_filter' defined but not used
I assume it can be removed.
Fixes:
3a678b5806e6 ("net: hns3: Optimize the VF's process of updating multicast MAC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Tue, 5 Jun 2018 11:40:34 +0000 (13:40 +0200)]
netfilter: provide udp*_lib_lookup for nf_tproxy
It is now possible to enable the libified nf_tproxy modules without
also enabling NETFILTER_XT_TARGET_TPROXY, which throws off the
ifdef logic in the udp core code:
net/ipv6/netfilter/nf_tproxy_ipv6.o: In function `nf_tproxy_get_sock_v6':
nf_tproxy_ipv6.c:(.text+0x1a8): undefined reference to `udp6_lib_lookup'
net/ipv4/netfilter/nf_tproxy_ipv4.o: In function `nf_tproxy_get_sock_v4':
nf_tproxy_ipv4.c:(.text+0x3d0): undefined reference to `udp4_lib_lookup'
We can actually simplify the conditions now to provide the two functions
exactly when they are needed.
Fixes:
45ca4e0cf273 ("netfilter: Libify xt_TPROXY")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Máté Eckl <ecklm94@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Tue, 5 Jun 2018 10:11:16 +0000 (13:11 +0300)]
qed*: Utilize FW 8.37.2.0
This FW contains several fixes and features.
RDMA
- Several modifications and fixes for Memory Windows
- drop vlan and tcp timestamp from mss calculation in driver for
this FW
- Fix SQ completion flow when local ack timeout is infinite
- Modifications in t10dif support
ETH
- Fix aRFS for tunneled traffic without inner IP.
- Fix chip configuration which may fail under heavy traffic conditions.
- Support receiving any-VNI in VXLAN and GENEVE RX classification.
iSCSI / FcoE
- Fix iSCSI recovery flow
- Drop vlan and tcp timestamp from mss calc for fw 8.37.2.0
Misc
- Several registers (split registers) won't read correctly with
ethtool -d
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maciej Żenczykowski [Tue, 5 Jun 2018 10:07:23 +0000 (03:07 -0700)]
net-tcp: remove useless tw_timeout field
Tested: 'git grep tw_timeout' comes up empty and it builds :-)
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Blakey [Tue, 5 Jun 2018 08:04:03 +0000 (11:04 +0300)]
net: sched: cls: Fix offloading when ingress dev is vxlan
When using a vxlan device as the ingress dev, we count it as a
"no offload dev", so when such a rule comes and err stop is true,
we fail early and don't try the egdev route which can offload it
through the egress device.
Fix that by not calling the block offload if one of the devices
attached to it is not offload capable, but make sure egress on such case
is capable instead.
Fixes:
caa7260156eb ("net: sched: keep track of offloaded filters [..]")
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 5 Jun 2018 04:16:58 +0000 (12:16 +0800)]
sctp: not allow transport timeout value less than HZ/5 for hb_timer
syzbot reported a rcu_sched self-detected stall on CPU which is caused
by too small value set on rto_min with SCTP_RTOINFO sockopt. With this
value, hb_timer will get stuck there, as in its timer handler it starts
this timer again with this value, then goes to the timer handler again.
This problem is there since very beginning, and thanks to Eric for the
reproducer shared from a syzbot mail.
This patch fixes it by not allowing sctp_transport_timeout to return a
smaller value than HZ/5 for hb_timer, which is based on TCP's min rto.
Note that it doesn't fix this issue by limiting rto_min, as some users
are still using small rto and no proper value was found for it yet.
Reported-by: syzbot+3dcd59a1f907245f891f@syzkaller.appspotmail.com
Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Tue, 5 Jun 2018 02:53:41 +0000 (19:53 -0700)]
bpfilter: switch to CC from HOSTCC
check that CC can build executables and use that compiler instead of HOSTCC
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Tue, 5 Jun 2018 02:42:56 +0000 (02:42 +0000)]
net/mlx5e: fix error return code in mlx5e_alloc_rq()
Fix to return error code -ENOMEM from the kvzalloc_node() error handling
case instead of 0, as done elsewhere in this function.
Fixes:
069d11465a80 ("net/mlx5e: RX, Enhance legacy Receive Queue memory scheme")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Tue, 5 Jun 2018 02:42:45 +0000 (02:42 +0000)]
net/mlx5e: Make function mlx5e_change_rep_mtu() static
Fixes the following sparse warning:
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:903:5: warning:
symbol 'mlx5e_change_rep_mtu' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subash Abhinov Kasiviswanathan [Tue, 5 Jun 2018 01:43:38 +0000 (19:43 -0600)]
net: qualcomm: rmnet: Fix use after free while sending command ack
When sending an ack to a command packet, the skb is still referenced
after it is sent to the real device. Since the real device could
free the skb, the device pointer would be invalid.
Also, remove an unnecessary variable.
Fixes:
ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subash Abhinov Kasiviswanathan [Tue, 5 Jun 2018 01:26:07 +0000 (19:26 -0600)]
net: ipv6: Generate random IID for addresses on RAWIP devices
RAWIP devices such as rmnet do not have a hardware address and
instead require the kernel to generate a random IID for the
IPv6 addresses.
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yousuk Seung [Mon, 4 Jun 2018 22:29:51 +0000 (15:29 -0700)]
tcp: refactor tcp_ecn_check_ce to remove sk type cast
Refactor tcp_ecn_check_ce and __tcp_ecn_check_ce to accept struct sock*
instead of tcp_sock* to clean up type casts. This is a pure refactor
patch.
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Tue, 5 Jun 2018 13:52:30 +0000 (15:52 +0200)]
Merge branch 'bpf-af-xdp-zc-api'
Björn Töpel says:
====================
This patch serie introduces zerocopy (ZC) support for
AF_XDP. Programs using AF_XDP sockets will now receive RX packets
without any copies and can also transmit packets without incurring any
copies. No modifications to the application are needed, but the NIC
driver needs to be modified to support ZC. If ZC is not supported by
the driver, the modes introduced in the AF_XDP patch will be
used. Using ZC in our micro benchmarks results in significantly
improved performance as can be seen in the performance section later
in this cover letter.
Note that for an untrusted application, HW packet steering to a
specific queue pair (the one associated with the application) is a
requirement when using ZC, as the application would otherwise be able
to see other user space processes' packets. If the HW cannot support
the required packet steering you need to use the XDP_SKB mode or the
XDP_DRV mode without ZC turned on. The XSKMAP introduced in the AF_XDP
patch set can be used to do load balancing in that case.
For benchmarking, you can use the xdpsock application from the AF_XDP
patch set without any modifications. Say that you would like your UDP
traffic from port 4242 to end up in queue 16, that we will enable
AF_XDP on. Here, we use ethtool for this:
ethtool -N p3p2 rx-flow-hash udp4 fn
ethtool -N p3p2 flow-type udp4 src-port 4242 dst-port 4242 \
action 16
Running the rxdrop benchmark in XDP_DRV mode with zerocopy can then be
done using:
samples/bpf/xdpsock -i p3p2 -q 16 -r -N
We have run some benchmarks on a dual socket system with two Broadwell
E5 2660 @ 2.0 GHz with hyperthreading turned off. Each socket has 14
cores which gives a total of 28, but only two cores are used in these
experiments. One for TR/RX and one for the user space application. The
memory is DDR4 @ 2133 MT/s (1067 MHz) and the size of each DIMM is
8192MB and with 8 of those DIMMs in the system we have 64 GB of total
memory. The compiler used is gcc (Ubuntu 7.3.0-16ubuntu3) 7.3.0. The
NIC is Intel I40E 40Gbit/s using the i40e driver.
Below are the results in Mpps of the I40E NIC benchmark runs for 64
and 1500 byte packets, generated by a commercial packet generator HW
outputing packets at full 40 Gbit/s line rate. The results are without
retpoline so that we can compare against previous numbers.
AF_XDP performance 64 byte packets. Results from the AF_XDP V3 patch
set are also reported for ease of reference. The numbers within
parantheses are from the RFC V1 ZC patch set.
Benchmark XDP_SKB XDP_DRV XDP_DRV with zerocopy
rxdrop 2.9* 9.6* 21.1(21.5)
txpush 2.6* - 22.0(21.6)
l2fwd 1.9* 2.5* 15.3(15.0)
AF_XDP performance 1500 byte packets:
Benchmark XDP_SKB XDP_DRV XDP_DRV with zerocopy
rxdrop 2.1* 3.3* 3.3(3.3)
l2fwd 1.4* 1.8* 3.1(3.1)
* From AF_XDP V3 patch set and cover letter.
So why do we not get higher values for RX similar to the 34 Mpps we
had in AF_PACKET V4? We made an experiment running the rxdrop
benchmark without using the xdp_do_redirect/flush infrastructure nor
using an XDP program (all traffic on a queue goes to one
socket). Instead the driver acts directly on the AF_XDP socket. With
this we got 36.9 Mpps, a significant improvement without any change to
the uapi. So not forcing users to have an XDP program if they do not
need it, might be a good idea. This measurement is actually higher
than what we got with AF_PACKET V4.
XDP performance on our system as a base line:
64 byte packets:
XDP stats CPU pps issue-pps
XDP-RX CPU 16 32.3M 0
1500 byte packets:
XDP stats CPU pps issue-pps
XDP-RX CPU 16 3.3M 0
The structure of the patch set is as follows:
Patches 1-3: Plumbing for AF_XDP ZC support
Patches 4-5: AF_XDP ZC for RX
Patches 6-7: AF_XDP ZC for TX
Patch 8-10: ZC support for i40e.
Patch 11: Use the bind flags in sample application to force TX skb
path when -S is providedd on the command line.
This patch set is based on the new uapi introduced in "AF_XDP: bug
fixes and descriptor changes". You need to apply that patch set
first, before applying this one.
We based this patch set on bpf-next commit
bd3a08aaa9a3 ("bpf:
flowlabel in bpf_fib_lookup should be flowinfo")
Comments:
* Implementing dynamic creation and deletion of queues in the i40e
driver would facilitate the coexistence of xdp_redirect and af_xdp.
Thanks: Björn and Magnus
====================
Note: as agreed upon, i40e/zc bits will be routed via Jeff's tree.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
David Ahern [Mon, 4 Jun 2018 20:41:42 +0000 (13:41 -0700)]
net/ipv6: prevent use after free in ip6_route_mpath_notify
syzbot reported a use-after-free:
BUG: KASAN: use-after-free in ip6_route_mpath_notify+0xe9/0x100 net/ipv6/route.c:4180
Read of size 4 at addr
ffff8801bf789cf0 by task syz-executor756/4555
CPU: 1 PID: 4555 Comm: syz-executor756 Not tainted 4.17.0-rc7+ #78
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b9/0x294 lib/dump_stack.c:113
print_address_description+0x6c/0x20b mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
__asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:432
ip6_route_mpath_notify+0xe9/0x100 net/ipv6/route.c:4180
ip6_route_multipath_add+0x615/0x1910 net/ipv6/route.c:4303
inet6_rtm_newroute+0xe3/0x160 net/ipv6/route.c:4391
...
Allocated by task 4555:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490
kmem_cache_alloc+0x12e/0x760 mm/slab.c:3554
dst_alloc+0xbb/0x1d0 net/core/dst.c:104
__ip6_dst_alloc+0x35/0xa0 net/ipv6/route.c:361
ip6_dst_alloc+0x29/0xb0 net/ipv6/route.c:376
ip6_route_info_create+0x4d4/0x3a30 net/ipv6/route.c:2834
ip6_route_multipath_add+0xc7e/0x1910 net/ipv6/route.c:4240
inet6_rtm_newroute+0xe3/0x160 net/ipv6/route.c:4391
...
Freed by task 4555:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
__cache_free mm/slab.c:3498 [inline]
kmem_cache_free+0x86/0x2d0 mm/slab.c:3756
dst_destroy+0x267/0x3c0 net/core/dst.c:140
dst_release_immediate+0x71/0x9e net/core/dst.c:205
fib6_add+0xa40/0x1650 net/ipv6/ip6_fib.c:1305
__ip6_ins_rt+0x6c/0x90 net/ipv6/route.c:1011
ip6_route_multipath_add+0x513/0x1910 net/ipv6/route.c:4267
inet6_rtm_newroute+0xe3/0x160 net/ipv6/route.c:4391
...
The problem is that rt_last can point to a deleted route if the insert
fails.
One reproducer is to insert a route and then add a multipath route that
has a duplicate nexthop.e.g,:
$ ip -6 ro add vrf red 2001:db8:101::/64 nexthop via 2001:db8:1::2
$ ip -6 ro append vrf red 2001:db8:101::/64 nexthop via 2001:db8:1::4 nexthop via 2001:db8:1::2
Fix by not setting rt_last until the it is verified the insert succeeded.
Fixes:
3b1137fe7482 ("net: ipv6: Change notifications for multipath add to RTA_MULTIPATH")
Cc: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Björn Töpel [Mon, 4 Jun 2018 12:06:01 +0000 (14:06 +0200)]
samples/bpf: xdpsock: use skb Tx path for XDP_SKB
Make sure that XDP_SKB also uses the skb Tx path.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Magnus Karlsson [Mon, 4 Jun 2018 12:05:57 +0000 (14:05 +0200)]
xsk: wire upp Tx zero-copy functions
Here we add the functionality required to support zero-copy Tx, and
also exposes various zero-copy related functions for the netdevs.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Magnus Karlsson [Mon, 4 Jun 2018 12:05:56 +0000 (14:05 +0200)]
net: added netdevice operation for Tx
Added ndo_xsk_async_xmit. This ndo "kicks" the netdev to start to pull
userland AF_XDP Tx frames from a NAPI context.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Björn Töpel [Mon, 4 Jun 2018 12:05:55 +0000 (14:05 +0200)]
xsk: add zero-copy support for Rx
Extend the xsk_rcv to support the new MEM_TYPE_ZERO_COPY memory, and
wireup ndo_bpf call in bind.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Björn Töpel [Mon, 4 Jun 2018 12:05:54 +0000 (14:05 +0200)]
xdp: add MEM_TYPE_ZERO_COPY
Here, a new type of allocator support is added to the XDP return
API. A zero-copy allocated xdp_buff cannot be converted to an
xdp_frame. Instead is the buff has to be copied. This is not supported
at all in this commit.
Also, an opaque "handle" is added to xdp_buff. This can be used as a
context for the zero-copy allocator implementation.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Björn Töpel [Mon, 4 Jun 2018 12:05:53 +0000 (14:05 +0200)]
net: xdp: added bpf_netdev_command XDP_{QUERY, SETUP}_XSK_UMEM
Extend ndo_bpf with two new commands used for query zero-copy support
and register an UMEM to a queue_id of a netdev.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Björn Töpel [Mon, 4 Jun 2018 12:05:52 +0000 (14:05 +0200)]
xsk: introduce xdp_umem_page
The xdp_umem_page holds the address for a page. Trade memory for
faster lookup. Later, we'll add DMA address here as well.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Björn Töpel [Mon, 4 Jun 2018 12:05:51 +0000 (14:05 +0200)]
xsk: moved struct xdp_umem definition
Moved struct xdp_umem to xdp_sock.h, in order to prepare for zero-copy
support.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Kun Yi [Mon, 4 Jun 2018 20:17:04 +0000 (13:17 -0700)]
net: phy: broadcom: Enable 125 MHz clock on LED4 pin for BCM54612E by default.
BCM54612E have 4 multi-functional LED pins that can be configured
through register setting; the LED4 pin can be configured to a 125MHz
reference clock output by setting the spare register. Since the dedicated
CLK125 reference clock pin is not brought out on the 48-Pin MLP, the LED4
pin is the only pin to provide such function in this package, and therefore
it is beneficial to just enable the reference clock by default.
Signed-off-by: Kun Yi <kunyi@google.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Mon, 4 Jun 2018 16:52:19 +0000 (18:52 +0200)]
l2tp: fix refcount leakage on PPPoL2TP sockets
Commit
d02ba2a6110c ("l2tp: fix race in pppol2tp_release with session
object destroy") tried to fix a race condition where a PPPoL2TP socket
would disappear while the L2TP session was still using it. However, it
missed the root issue which is that an L2TP session may accept to be
reconnected if its associated socket has entered the release process.
The tentative fix makes the session hold the socket it is connected to.
That saves the kernel from crashing, but introduces refcount leakage,
preventing the socket from completing the release process. Once stalled,
everything the socket depends on can't be released anymore, including
the L2TP session and the l2tp_ppp module.
The root issue is that, when releasing a connected PPPoL2TP socket, the
session's ->sk pointer (RCU-protected) is reset to NULL and we have to
wait for a grace period before destroying the socket. The socket drops
the session in its ->sk_destruct callback function, so the session
will exist until the last reference on the socket is dropped.
Therefore, there is a time frame where pppol2tp_connect() may accept
reconnecting a session, as it only checks ->sk to figure out if the
session is connected. This time frame is shortened by the fact that
pppol2tp_release() calls l2tp_session_delete(), making the session
unreachable before resetting ->sk. However, pppol2tp_connect() may
grab the session before it gets unhashed by l2tp_session_delete(), but
it may test ->sk after the later got reset. The race is not so hard to
trigger and syzbot found a pretty reliable reproducer:
https://syzkaller.appspot.com/bug?id=
418578d2a4389074524e04d641eacb091961b2cf
Before
d02ba2a6110c, another race could let pppol2tp_release()
overwrite the ->__sk pointer of an L2TP session, thus tricking
pppol2tp_put_sk() into calling sock_put() on a socket that is different
than the one for which pppol2tp_release() was originally called. To get
there, we had to trigger the race described above, therefore having one
PPPoL2TP socket being released, while the session it is connected to is
reconnecting to a different PPPoL2TP socket. When releasing this new
socket fast enough, pppol2tp_release() overwrites the session's
->__sk pointer with the address of the new socket, before the first
pppol2tp_put_sk() call gets scheduled. Then the pppol2tp_put_sk() call
invoked by the original socket will sock_put() the new socket,
potentially dropping its last reference. When the second
pppol2tp_put_sk() finally runs, its socket has already been freed.
With
d02ba2a6110c, the session takes a reference on both sockets.
Furthermore, the session's ->sk pointer is reset in the
pppol2tp_session_close() callback function rather than in
pppol2tp_release(). Therefore, ->__sk can't be overwritten and
pppol2tp_put_sk() is called only once (l2tp_session_delete() will only
run pppol2tp_session_close() once, to protect the session against
concurrent deletion requests). Now pppol2tp_put_sk() will properly
sock_put() the original socket, but the new socket will remain, as
l2tp_session_delete() prevented the release process from completing.
Here, we don't depend on the ->__sk race to trigger the bug. Getting
into the pppol2tp_connect() race is enough to leak the reference, no
matter when new socket is released.
So it all boils down to pppol2tp_connect() failing to realise that the
session has already been connected. This patch drops the unneeded extra
reference counting (mostly reverting
d02ba2a6110c) and checks that
neither ->sk nor ->__sk is set before allowing a session to be
connected.
Fixes:
d02ba2a6110c ("l2tp: fix race in pppol2tp_release with session object destroy")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 5 Jun 2018 12:50:18 +0000 (08:50 -0400)]
Merge branch 'net-phy-improve-PM-handling-of-PHY-MDIO'
Heiner Kallweit says:
====================
net: phy: improve PM handling of PHY/MDIO
Current implementation of MDIO bus PM ops doesn't actually implement
bus-specific PM ops but just calls PM ops defined on a device level
what doesn't seem to be fully in line with the core PM model.
When looking e.g. at __device_suspend() the PM core looks for PM ops
of a device in a specific order:
1. device PM domain
2. device type
3. device class
4. device bus
I think it has good reason that there's no PM ops on device level.
The situation can be improved by modeling PHY's as device type of
a MDIO device. If for some other type of MDIO device PM ops are
needed, it could be modeled as struct device_type as well.
====================
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 2 Jun 2018 20:37:24 +0000 (22:37 +0200)]
net: phy: remove PM ops from MDIO bus
Current implementation of MDIO bus PM ops doesn't actually implement
bus-specific PM ops but just calls PM ops defined on a device level
what doesn't seem to be fully in line with the core PM model.
When looking e.g. at __device_suspend() the PM core looks for PM ops
of a device in a specific order:
1. device PM domain
2. device type
3. device class
4. device bus
I think it has good reason that there's no PM ops on device level.
Now that a device type representation of PHY's as special type of MDIO
devices was added (only user of MDIO bus PM ops), the MDIO bus
PM ops can be removed including member pm of struct mdio_device.
If for some other type of MDIO device PM ops are needed, it should be
modeled as struct device_type as well.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 2 Jun 2018 20:36:06 +0000 (22:36 +0200)]
net: phy: add struct device_type representation of a PHY
A PHY is a type of MDIO device, so let's model it as struct device_type
and place PM ops, attribute groups and release callback on device type
level. For this the attribute definitions have to be moved.
This change allows us to get rid of the PM ops on a bus level in a second
step.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Tue, 5 Jun 2018 12:03:17 +0000 (14:03 +0200)]
Merge branch 'bpf-xdp-remove-xdp-flush'
Jesper Dangaard Brouer says:
====================
This patchset removes the net_device operation ndo_xdp_flush() call.
This is a follow merge commit
ea9916ea3ed9 ("Merge branch
'ndo_xdp_xmit-cleanup'"). As after commit
c1ece6b245bd ("bpf/xdp:
devmap can avoid calling ndo_xdp_flush") no callers of ndo_xdp_flush
are left in bpf-next tree.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jesper Dangaard Brouer [Tue, 5 Jun 2018 11:55:50 +0000 (13:55 +0200)]
net: remove net_device operation ndo_xdp_flush
All drivers are cleaned up and no references to ndo_xdp_flush
are left in drivers, it is time to remove the net_device_ops
operation ndo_xdp_flush.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jesper Dangaard Brouer [Tue, 5 Jun 2018 11:55:45 +0000 (13:55 +0200)]
tun: remove ndo_xdp_flush call tun_xdp_flush
Remove the ndo_xdp_flush call implementation tun_xdp_flush
as no callers of ndo_xdp_flush are left.
The tun drivers XDP_TX implementation also used tun_xdp_flush (and
tun_xdp_xmit). This is easily solved by passing the XDP_XMIT_FLUSH
flag to tun_xdp_xmit in tun_xdp_tx.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jesper Dangaard Brouer [Tue, 5 Jun 2018 11:55:40 +0000 (13:55 +0200)]
virtio_net: remove ndo_xdp_flush call virtnet_xdp_flush
Remove the ndo_xdp_flush call implementation virtnet_xdp_flush
as no callers of ndo_xdp_flush are left.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jesper Dangaard Brouer [Tue, 5 Jun 2018 11:55:35 +0000 (13:55 +0200)]
ixgbe: remove ndo_xdp_flush call ixgbe_xdp_flush
Remove the ndo_xdp_flush call implementation ixgbe_xdp_flush
as no callers of ndo_xdp_flush are left.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jesper Dangaard Brouer [Tue, 5 Jun 2018 11:55:30 +0000 (13:55 +0200)]
i40e: remove ndo_xdp_flush call i40e_xdp_flush
Remove the ndo_xdp_flush call implementation i40e_xdp_flush
as no callers of ndo_xdp_flush are left.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Wang YanQing [Fri, 11 May 2018 02:52:17 +0000 (10:52 +0800)]
bpf, arm32: fix inconsistent naming about emit_a32_lsr_{r64,i64}
The names for BPF_ALU64 | BPF_ARSH are emit_a32_arsh_*,
the names for BPF_ALU64 | BPF_LSH are emit_a32_lsh_*, but
the names for BPF_ALU64 | BPF_RSH are emit_a32_lsr_*.
For consistence reason, let's rename emit_a32_lsr_* to
emit_a32_rsh_*.
This patch also corrects a wrong comment.
Fixes:
39c13c204bb1 ("arm: eBPF JIT compiler")
Signed-off-by: Wang YanQing <udknight@gmail.com>
Cc: Shubham Bansal <illusionist.neo@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux@armlinux.org.uk
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Wang YanQing [Fri, 11 May 2018 03:06:34 +0000 (11:06 +0800)]
bpf, arm32: correct check_imm24
imm24 is signed, so the right range is:
[-(1<<(24 - 1)), (1<<(24 - 1)) - 1]
Note: this patch also fix a typo.
Fixes:
39c13c204bb1 ("arm: eBPF JIT compiler")
Signed-off-by: Wang YanQing <udknight@gmail.com>
Cc: Shubham Bansal <illusionist.neo@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux@armlinux.org.uk
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
David S. Miller [Tue, 5 Jun 2018 02:23:35 +0000 (22:23 -0400)]
Merge git://git./linux/kernel/git/davem/net
David S. Miller [Mon, 4 Jun 2018 21:35:35 +0000 (17:35 -0400)]
Merge branch '10GbE' of git://git./linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2018-06-04
This series contains a smorgasbord of updates to documentation, e1000e,
igb, ixgbe, ixgbevf and i40e.
Benjamin Poirier fixes a potential kernel crash due to NULL pointer
dereference in e1000e.
Jeff updates the kernel documentation for e100 and e1000 to correct
default values and URLs which were incorrect in the documentation. Also
took the time to update these to the new reStructured text format for
kernel documentation.
Joanna Yurdal fixes a missing PTP transmit timestamp by ensuring that
TSICR gets cleared when ICR is cleared.
Sergey updates igb to reset all the transmit queues at one time so that
we only have to wait once for all the queues to be reset.
Alex fixes ixgbevf so that malicious driver detection (MDD) can co-exist
with XDP.
Emil and Tony extend the RTNL lock to ensure we get the most up-to-date
values for the bits and avoid a possible race condition when going down.
YueHaibing from Huawei introduces a helper function in ixgbe for
operation reads to simplify the code a bit more.
Daniel Borkmann adds support for XDP meta data when using build SKB
for i40e.
Shannon Nelson provides twp fixes for the IPSec code in ixgbe, first is
to make sure we do not try to offload the decryption of any incoming
packet that is destined for the management engine. The other fix is to
resolve a cast problem introduced by a sparse cleanup patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xi Wang [Mon, 4 Jun 2018 16:50:09 +0000 (17:50 +0100)]
net: hns: Fix the process of adding broadcast addresses to tcam
If the multicast mask value in device tree is configured not all
0xff, the broadcast mac will be lost from tcam table after the
execution of command 'ifconfig up'. The address is appended by
hns_ae_start, but will be clear later by hns_nic_set_rx_mode
called in dev_open process.
This patch fixed it by not use the multicast mask when add a
broadcast address.
Fixes:
b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Mon, 4 Jun 2018 15:32:23 +0000 (18:32 +0300)]
net: sched: return error code when tcf proto is not found
If requested tcf proto is not found, get and del filter netlink protocol
handlers output error message to extack, but do not return actual error
code. Add check to return ENOENT when result of tp find function is NULL
pointer.
Fixes:
c431f89b18a2 ("net: sched: split tc_ctl_tfilter into three handlers")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Mon, 4 Jun 2018 14:46:01 +0000 (17:46 +0300)]
team: use netdev_features_t instead of u32
This code was introduced in 2011 around the same time that we made
netdev_features_t a u64 type. These days a u32 is not big enough to
hold all the potential features.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Mon, 4 Jun 2018 14:43:21 +0000 (17:43 +0300)]
net_failover: Use netdev_features_t instead of u32
The features mask needs to be a netdev_features_t (u64) because a u32
is not big enough.
Fixes:
cfc80d9a1163 ("net: Introduce net_failover driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Mon, 4 Jun 2018 13:10:31 +0000 (21:10 +0800)]
qed: use dma_zalloc_coherent instead of allocator/memset
Use dma_zalloc_coherent instead of dma_alloc_coherent
followed by memset 0.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Mon, 4 Jun 2018 13:07:59 +0000 (21:07 +0800)]
wan/fsl_ucc_hdlc: use dma_zalloc_coherent instead of allocator/memset
Use dma_zalloc_coherent instead of dma_alloc_coherent
followed by memset 0.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 4 Jun 2018 21:22:17 +0000 (17:22 -0400)]
Merge branch 'for-upstream' of git://git./linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:
====================
pull request: bluetooth-next 2018-06-04
Here's one last bluetooth-next pull request for the 4.18 kernel:
- New USB device IDs for Realtek 8822BE and 8723DE
- reset/resume fix for Dell Inspiron 5565
- Fix HCI_UART_INIT_PENDING flag behavior
- Fix patching behavior for some ATH3012 models
- A few other minor cleanups & fixes
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Olivier Gayot [Mon, 4 Jun 2018 10:07:37 +0000 (12:07 +0200)]
docs: networking: fix minor typos in various documentation files
This patch fixes some typos/misspelling errors in the
Documentation/networking files.
Signed-off-by: Olivier Gayot <olivier.gayot@sigexec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maciej Żenczykowski [Sun, 3 Jun 2018 17:47:05 +0000 (10:47 -0700)]
net: do not allow changing SO_REUSEADDR/SO_REUSEPORT on bound sockets
It is not safe to do so because such sockets are already in the
hash tables and changing these options can result in invalidating
the tb->fastreuse(port) caching.
This can have later far reaching consequences wrt. bind conflict checks
which rely on these caches (for optimization purposes).
Not to mention that you can currently end up with two identical
non-reuseport listening sockets bound to the same local ip:port
by clearing reuseport on them after they've already both been bound.
There is unfortunately no EISBOUND error or anything similar,
and EISCONN seems to be misleading for a bound-but-not-connected
socket, so use EUCLEAN 'Structure needs cleaning' which AFAICT
is the closest you can get to meaning 'socket in bad state'.
(although perhaps EINVAL wouldn't be a bad choice either?)
This does unfortunately run the risk of breaking buggy
userspace programs...
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Change-Id: I77c2b3429b2fdf42671eee0fa7a8ba721c94963b
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maciej Żenczykowski [Sun, 3 Jun 2018 17:41:17 +0000 (10:41 -0700)]
net-tcp: extend tcp_tw_reuse sysctl to enable loopback only optimization
This changes the /proc/sys/net/ipv4/tcp_tw_reuse from a boolean
to an integer.
It now takes the values 0, 1 and 2, where 0 and 1 behave as before,
while 2 enables timewait socket reuse only for sockets that we can
prove are loopback connections:
ie. bound to 'lo' interface or where one of source or destination
IPs is 127.0.0.0/8, ::ffff:127.0.0.0/104 or ::1.
This enables quicker reuse of ephemeral ports for loopback connections
- where tcp_tw_reuse is 100% safe from a protocol perspective
(this assumes no artificially induced packet loss on 'lo').
This also makes estblishing many loopback connections *much* faster
(allocating ports out of the first half of the ephemeral port range
is significantly faster, then allocating from the second half)
Without this change in a 32K ephemeral port space my sample program
(it just establishes and closes [::1]:ephemeral -> [::1]:server_port
connections in a tight loop) fails after 32765 connections in 24 seconds.
With it enabled 50000 connections only take 4.7 seconds.
This is particularly problematic for IPv6 where we only have one local
address and cannot play tricks with varying source IP from 127.0.0.0/8
pool.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Wei Wang <weiwan@google.com>
Change-Id: I0377961749979d0301b7b62871a32a4b34b654e1
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Bason [Sun, 3 Jun 2018 16:13:07 +0000 (19:13 +0300)]
qed: Add srq core support for RoCE and iWARP
This patch adds support for configuring SRQ and provides the necessary
APIs for rdma upper layer driver (qedr) to enable the SRQ feature.
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Yuval Bason <yuval.bason@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 4 Jun 2018 21:07:28 +0000 (17:07 -0400)]
Merge branch 'bnx2-warnings'
Varsha Rao says:
====================
net: bnx2: Fix checkpatch and clang warnings
This patchset fixes NULL comparison and extra parentheses, checkpatch
and clang warnings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Varsha Rao [Sun, 3 Jun 2018 11:49:52 +0000 (17:19 +0530)]
net: ethernet: bnx2: Replace NULL comparison
This patch fixes the checkpatch issue of NULL comparison. Replace x == NULL
with !x, by using the following coccinelle script:
@disable is_null@
expression e;
@@
-e==NULL
+!e
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varsha Rao [Sun, 3 Jun 2018 11:49:04 +0000 (17:19 +0530)]
net: ethernet: bnx2: Remove extra parentheses
The following coccinelle script removes extra parentheses to fix the
clang warning of extraneous parentheses.
@disable paren@
identifier i;
expression e;
statement s;
@@
if (
-(i == e)
+i == e
)
s
Suggested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Sun, 3 Jun 2018 08:10:01 +0000 (16:10 +0800)]
net: gemini: fix spelling mistake: "it" -> "is"
Trivial fix to spelling mistake in gemini dev_warn message
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Blakey [Sun, 3 Jun 2018 07:06:14 +0000 (10:06 +0300)]
cls_flower: Fix comparing of old filter mask with new filter
We incorrectly compare the mask and the result is that we can't modify
an already existing rule.
Fix that by comparing correctly.
Fixes:
05cd271fd61a ("cls_flower: Support multiple masks per priority")
Reported-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Blakey [Sun, 3 Jun 2018 07:06:13 +0000 (10:06 +0300)]
cls_flower: Fix missing free of rhashtable
When destroying the instance, destroy the head rhashtable.
Fixes:
05cd271fd61a ("cls_flower: Support multiple masks per priority")
Reported-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Sun, 3 Jun 2018 04:40:19 +0000 (21:40 -0700)]
net: skbuff.h: drop unneeded <linux/slab.h>
<linux/skbuff.h> does not use nor need <linux/slab.h>, so drop this
header file from skbuff.h.
<linux/skbuff.h> is currently #included in around 1200 C source and
header files, making it the 31st most-used header file.
Build tested [allmodconfig] on 20 arch-es.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Sun, 3 Jun 2018 02:40:15 +0000 (10:40 +0800)]
net: chelsio: Use zeroing memory allocator instead of allocator/memset
Use dma_zalloc_coherent for allocating zeroed
memory and remove unnecessary memset function.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Sun, 3 Jun 2018 01:17:39 +0000 (02:17 +0100)]
rxrpc: Fix handling of call quietly cancelled out on server
Sometimes an in-progress call will stop responding on the fileserver when
the fileserver quietly cancels the call with an internally marked abort
(RX_CALL_DEAD), without sending an ABORT to the client.
This causes the client's call to eventually expire from lack of incoming
packets directed its way, which currently leads to it being cancelled
locally with ETIME. Note that it's not currently clear as to why this
happens as it's really hard to reproduce.
The rotation policy implement by kAFS, however, doesn't differentiate
between ETIME meaning we didn't get any response from the server and ETIME
meaning the call got cancelled mid-flow. The latter leads to an oops when
fetching data as the rotation partially resets the afs_read descriptor,
which can result in a cleared page pointer being dereferenced because that
page has already been filled.
Handle this by the following means:
(1) Set a flag on a call when we receive a packet for it.
(2) Store the highest packet serial number so far received for a call
(bearing in mind this may wrap).
(3) If, when the "not received anything recently" timeout expires on a
call, we've received at least one packet for a call and the connection
as a whole has received packets more recently than that call, then
cancel the call locally with ECONNRESET rather than ETIME.
This indicates that the call was definitely in progress on the server.
(4) In kAFS, if the rotation algorithm sees ECONNRESET rather than ETIME,
don't try the next server, but rather abort the call.
This avoids the oops as we don't try to reuse the afs_read struct.
Rather, as-yet ungotten pages will be reread at a later data.
Also:
(5) Add an rxrpc tracepoint to log detection of the call being reset.
Without this, I occasionally see an oops like the following:
general protection fault: 0000 [#1] SMP PTI
...
RIP: 0010:_copy_to_iter+0x204/0x310
RSP: 0018:
ffff8800cae0f828 EFLAGS:
00010206
RAX:
0000000000000560 RBX:
0000000000000560 RCX:
0000000000000560
RDX:
ffff8800cae0f968 RSI:
ffff8800d58b3312 RDI:
0005080000000000
RBP:
ffff8800cae0f968 R08:
0000000000000560 R09:
ffff8800ca00f400
R10:
ffff8800c36f28d4 R11:
00000000000008c4 R12:
ffff8800cae0f958
R13:
0000000000000560 R14:
ffff8800d58b3312 R15:
0000000000000560
FS:
00007fdaef108080(0000) GS:
ffff8800ca680000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fb28a8fa000 CR3:
00000000d2a76002 CR4:
00000000001606e0
Call Trace:
skb_copy_datagram_iter+0x14e/0x289
rxrpc_recvmsg_data.isra.0+0x6f3/0xf68
? trace_buffer_unlock_commit_regs+0x4f/0x89
rxrpc_kernel_recv_data+0x149/0x421
afs_extract_data+0x1e0/0x798
? afs_wait_for_call_to_complete+0xc9/0x52e
afs_deliver_fs_fetch_data+0x33a/0x5ab
afs_deliver_to_call+0x1ee/0x5e0
? afs_wait_for_call_to_complete+0xc9/0x52e
afs_wait_for_call_to_complete+0x12b/0x52e
? wake_up_q+0x54/0x54
afs_make_call+0x287/0x462
? afs_fs_fetch_data+0x3e6/0x3ed
? rcu_read_lock_sched_held+0x5d/0x63
afs_fs_fetch_data+0x3e6/0x3ed
afs_fetch_data+0xbb/0x14a
afs_readpages+0x317/0x40d
__do_page_cache_readahead+0x203/0x2ba
? ondemand_readahead+0x3a7/0x3c1
ondemand_readahead+0x3a7/0x3c1
generic_file_buffered_read+0x18b/0x62f
__vfs_read+0xdb/0xfe
vfs_read+0xb2/0x137
ksys_read+0x50/0x8c
do_syscall_64+0x7d/0x1a0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Note the weird value in RDI which is a result of trying to kmap() a NULL
page pointer.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chas Williams [Sat, 2 Jun 2018 21:49:53 +0000 (17:49 -0400)]
Allow ethtool to change tun link settings
Let user space set whatever it would like to advertise for the
tun interface. Preserve the existing defaults.
Signed-off-by: Chas Williams <3chas3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonghong Song [Mon, 4 Jun 2018 15:53:41 +0000 (08:53 -0700)]
bpf: guard bpf_get_current_cgroup_id() with CONFIG_CGROUPS
Commit
bf6fa2c893c5 ("bpf: implement bpf_get_current_cgroup_id()
helper") introduced a new helper bpf_get_current_cgroup_id().
The helper has a dependency on CONFIG_CGROUPS.
When CONFIG_CGROUPS is not defined, using the helper will result
the following verifier error:
kernel subsystem misconfigured func bpf_get_current_cgroup_id#80
which is hard for users to interpret.
Guarding the reference to bpf_get_current_cgroup_id_proto with
CONFIG_CGROUPS will result in below better message:
unknown func bpf_get_current_cgroup_id#80
Fixes:
bf6fa2c893c5 ("bpf: implement bpf_get_current_cgroup_id() helper")
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann [Mon, 4 Jun 2018 15:21:03 +0000 (17:21 +0200)]
Merge branch 'bpf-af-xdp-fixes'
Björn Töpel says:
====================
An issue with the current AF_XDP uapi raised by Mykyta Iziumtsev (see
https://www.spinics.net/lists/netdev/msg503664.html) is that it does
not support NICs that have a "type-writer" model in an efficient
way. In this model, a memory window is passed to the hardware and
multiple frames might be filled into that window, instead of just one
that we have in the current fixed frame-size model.
This patch set fixes two bugs in the current implementation and then
changes the uapi so that the type-writer model can be supported
efficiently by a possible future extension of AF_XDP.
These are the uapi changes in this patch:
* Change the "u32 idx" in the descriptors to "u64 addr". The current
idx based format does NOT work for the type-writer model (as packets
can start anywhere within a frame) but that a relative address
pointer (the u64 addr) works well for both models in the prototype
code we have that supports both models. We increased it from u32 to
u64 to support umems larger than 4G. We have also removed the u16
offset when having a "u64 addr" since that information is already
carried in the least significant bits of the address.
* We want to use "u8 padding[5]" for something useful in the future
(since we are not allowed to change its name), so we now call it
just options so it can be extended for various purposes in the
future. It is an u32 as that it what is left of the 16 byte
descriptor.
* We changed the name of frame_size in the UMEM_REG setsockopt to
chunk_size since this naming also makes sense to the type-writer
model.
With these changes to the uapi, we believe the type-writer model can
be supported without having to resort to a new descriptor format. The
type-writer model could then be supported, from the uapi point of
view, by setting a flag at bind time and providing a new flag bit in
the options field of the descriptor that signals to user space that
all packets have been written in a chunk. Or with a new chunk
completion queue as suggested by Mykyta in his latest feedback mail on
the list.
We based this patch set on bpf-next commit
bd3a08aaa9a3 ("bpf:
flowlabel in bpf_fib_lookup should be flowinfo")
The structure of the patch set is as follows:
Patches 1-2: Fixes two bugs in the current implementation.
Patches 3-4: Prepares the uapi for a "type-writer" model and modifies
the sample application so that it works with the new
uapi.
Patch 5: Small performance improvement patch for the sample application.
Cheers: Magnus and Björn
====================
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
David S. Miller [Mon, 4 Jun 2018 19:23:26 +0000 (15:23 -0400)]
Merge branch 'sh_eth-fix-and-clean-up-sh_eth_soft_swap'
Sergei Shtylyov says:
====================
sh_eth: fix & clean up sh_eth_soft_swap()
Here's a set of 3 patches against DaveM's 'net-next.git' repo. First one fixes an
old buffer endiannes issue (luckily, the ARM SoCs are smart enough to not actually
care) plus couple clean ups around sh_eth_soft_swap()...
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Shtylyov [Sat, 2 Jun 2018 19:40:16 +0000 (22:40 +0300)]
sh_eth: use DIV_ROUND_UP() in sh_eth_soft_swap()
When initializing 'maxp' in sh_eth_soft_swap(), the buffer length needs
to be rounded up -- that's just asking for DIV_ROUND_UP()!
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Shtylyov [Sat, 2 Jun 2018 19:38:56 +0000 (22:38 +0300)]
sh_eth: uninline sh_eth_soft_swap()
sh_eth_tsu_soft_swap() is called twice by the driver, remove *inline* and
move that function from the header to the driver itself to let gcc decide
whether to expand it inline or not...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Shtylyov [Sat, 2 Jun 2018 19:37:42 +0000 (22:37 +0300)]
sh_eth: make sh_eth_soft_swap() work on ARM
Browsing thru the driver disassembly, I noticed that ARM gcc generated
no code whatsoever for sh_eth_soft_swap() while building a little-endian
kernel -- apparently __LITTLE_ENDIAN__ was not being #define'd, however
it got implicitly #define'd when building with the SH gcc (I could only
find the explicit #define __LITTLE_ENDIAN that was #include'd when building
a little-endian kernel). Luckily, the Ether controller only doing big-
endian DMA is encountered on the early SH771x SoCs only and all ARM SoCs
implement EDMR.DE and thus set 'sh_eth_cpu_data::hw_swap'. But anyway, we
need to fix the #ifdef inside sh_eth_soft_swap() to something that would
work on all architectures...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 31 May 2018 21:12:18 +0000 (14:12 -0700)]
ixgbe: fix broken ipsec Rx with proper cast on spi
Fix up a cast problem introduced by a sparse cleanup patch. This fixes
a problem where the encrypted packets were not recognized on Rx and
subsequently dropped.
Fixes:
9cfbfa701b55 ("ixgbe: cleanup sparse warnings")
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Shannon Nelson [Wed, 30 May 2018 18:20:04 +0000 (11:20 -0700)]
ixgbe: check ipsec ip addr against mgmt filters
Make sure we don't try to offload the decryption of an incoming
packet that should get delivered to the management engine. This
is a corner case that will likely be very seldom seen, but could
really confuse someone if they were to hit it.
Suggested-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
David S. Miller [Mon, 4 Jun 2018 17:27:58 +0000 (13:27 -0400)]
Merge branch 'mlxsw-Fixes-in-offloading-of-mirror-to-gretap'
Ido Schimmel says:
====================
mlxsw: Fixes in offloading of mirror-to-gretap
Petr says:
These two patches fix issues in offloading of mirror-to-gretap when
bridge is present in the underlay.
In patch #1, reconsideration of SPAN configuration is not done right at
the point that SWITCHDEV_OBJ_ID_PORT_VLAN deletion notification is
distributed, but is postponed, because the notifications are actually
distributed before the relevant change is implemented in the bridge.
In patch #2, a problem in configuring VLAN tagging in situations when a
VLAN device is on top of an 802.1Q bridge whose egress port is marked as
"egress untagged". In that case, mlxsw would neglect to suppress the
tagging implicitly assumed after the VLAN device was seen.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Sat, 2 Jun 2018 18:09:35 +0000 (21:09 +0300)]
mlxsw: spectrum_span: Suppress VLAN on BRIDGE_VLAN_INFO_UNTAGGED
When offloading mirroring to gretap or ip6gretap netdevices, an 802.1q
bridge is one of the soft devices permissible in the underlay when
resolving the packet path. After the packet path is resolved to a
particular bridge egress device, flags on packet VLAN determine whether
the egressed packet should be tagged.
The current logic however only ever sets the VLAN tag, never suppresses
it. Thus if there's a VLAN netdevice above the bridge that determines
the packet VLAN, that VLAN is never unset, and mirroring is configured
with VLAN tagging.
Fix by setting the packet VLAN on both branches: set to zero (for unset)
when BRIDGE_VLAN_INFO_UNTAGGED, copy the resolved VLAN (e.g. from bridge
PVID) otherwise.
Fixes:
946a11e7408e ("mlxsw: spectrum_span: Allow bridge for gretap mirror")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Sat, 2 Jun 2018 18:09:34 +0000 (21:09 +0300)]
mlxsw: spectrum_switchdev: Postpone respin on object deletion
VLAN deletion notifications are emitted before the relevant change is
projected to bridge configuration. Thus, like with VLAN addition,
schedule SPAN respin for later.
Fixes:
c520bc698647 ("mlxsw: Respin SPAN on switchdev events")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen [Wed, 30 May 2018 16:05:12 +0000 (09:05 -0700)]
ixgbe: fix possible race in reset subtask
Similar to ixgbevf, the same possibility for race exists. Extend the RTNL
lock in ixgbe_reset_subtask() to protect the state bits; this is to make
sure that we get the most up-to-date values for the bits and avoid a
possible race when going down.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Daniel Borkmann [Mon, 28 May 2018 09:07:20 +0000 (11:07 +0200)]
bpf, i40e: add meta data support
Add support for XDP meta data when using build skb variant of
the i40e driver. Implementation is analogous to the existing
ixgbe and ixgbevf support for meta data from
366a88fe2f40 ("bpf,
ixgbe: add meta data support") and
be8333322eff ("ixgbevf: Add
support for meta data"). With the build skb variant we get
192 bytes of extra headroom which can be used for encaps or
meta data.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Michal Kubecek [Mon, 4 Jun 2018 09:36:05 +0000 (11:36 +0200)]
ipv6: omit traffic class when calculating flow hash
Some of the code paths calculating flow hash for IPv6 use flowlabel member
of struct flowi6 which, despite its name, encodes both flow label and
traffic class. If traffic class changes within a TCP connection (as e.g.
ssh does), ECMP route can switch between path. It's also inconsistent with
other code paths where ip6_flowlabel() (returning only flow label) is used
to feed the key.
Use only flow label everywhere, including one place where hash key is set
using ip6_flowinfo().
Fixes:
51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)")
Fixes:
f70ea018da06 ("net: Add functions to get skb->hash based on flow structures")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Wed, 23 May 2018 12:08:13 +0000 (20:08 +0800)]
ixgbe: introduce a helper to simplify code
ixgbe_dbg_reg_ops_read and ixgbe_dbg_netdev_ops_read copy-pasting
the same code except for ixgbe_dbg_netdev_ops_buf/ixgbe_dbg_reg_ops_buf,
so introduce a helper ixgbe_dbg_common_ops_read to remove redundant code.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
David S. Miller [Mon, 4 Jun 2018 17:20:38 +0000 (13:20 -0400)]
Revert "ipv6: omit traffic class when calculating flow hash"
This reverts commit
87ae68c8b4944d142447b88875c9c412c714434f.
Applied the wrong version of this fix, correct version
coming up.
Signed-off-by: David S. Miller <davem@davemloft.net>
Emil Tantilov [Tue, 22 May 2018 16:18:46 +0000 (09:18 -0700)]
ixgbevf: fix possible race in the reset subtask
Extend the RTNL lock in ixgbevf_reset_subtask() to protect the state bits
check in addition to the call to ixgbevf_reinit_locked().
This is to make sure that we get the most up-to-date values for the bits
and avoid a possible race when going down.
Suggested-by: Zhiping du <zhipingdu@tencent.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Michal Kubecek [Sat, 2 Jun 2018 07:40:34 +0000 (09:40 +0200)]
ipv6: omit traffic class when calculating flow hash
Some of the code paths calculating flow hash for IPv6 use flowlabel member
of struct flowi6 which, despite its name, encodes both flow label and
traffic class. If traffic class changes within a TCP connection (as e.g.
ssh does), ECMP route can switch between path. It's also incosistent with
other code paths where ip6_flowlabel() (returning only flow label) is used
to feed the key.
Use only flow label everywhere, including one place where hash key is set
using ip6_flowinfo().
Fixes:
51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)")
Fixes:
f70ea018da06 ("net: Add functions to get skb->hash based on flow structures")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Tue, 22 May 2018 15:44:29 +0000 (11:44 -0400)]
ixgbevf: Fix coexistence of malicious driver detection with XDP
In the case of the VF driver it is supposed to provide a context descriptor
that allows us to provide information about the header offsets inside of
the frame. However in the case of XDP we don't really have any of that
information since the data is minimally processed. As a result we were
seeing malicious driver detection (MDD) events being triggered when the PF
had that functionality enabled.
To address this I have added a bit of new code that will "prime" the XDP
ring by providing one context descriptor that assumes the minimal setup of
an Ethernet frame which is an L2 header length of 14. With just that we can
provide enough information to make the hardware happy so that we don't
trigger MDD events.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Sergey Nemov [Fri, 18 May 2018 09:58:40 +0000 (11:58 +0200)]
igb: Wait 10ms just once after TX queues reset
Move 10ms sleep out of function resetting TX queue.
Reset all the TX queues in one turn and
wait for all of them just once.
Use usleep_range() instead of mdelay() in order not to
affect transmission on other interfaces.
Signed-off-by: Sergey Nemov <sergey.nemov@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Joanna Yurdal [Wed, 16 May 2018 11:14:11 +0000 (13:14 +0200)]
igb: Clear TSICR interrupts together with ICR
Issuing "ip link set up/down" can block TSICR interrupts, what results in
missing PTP Tx timestamp and no PPS pulse generation.
Problem happens when the link is set up with the TSICR interrupts pending.
ICR is cleared before enabling interrupts, while TSICR is not. When all TSICR
interrupts are pending at this moment, time_sync interrupt will never
be generated. TSICR should be cleared as well.
In order to reproduce the issue:
1. Setup linux with IEEE 1588 grandmaster and PPS output enabled
2. Continue setting link up/down with random intervals between commands
3. Wait until PPS is not generated ( only one pulse is generated and PPS
dies), and ptp4l complains constantly about Tx timeout.
Signed-off-by: Joanna Yurdal <jyu@trackman.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jeff Kirsher [Thu, 10 May 2018 19:55:38 +0000 (12:55 -0700)]
Documentation: e1000: Update kernel documentation
Updated the e1000.txt kernel documentation with the latest information.
Also convert the text file to reStructuredText (RST) format, since the
Linux kernel documentation now uses this format for documentation.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Jeff Kirsher [Thu, 10 May 2018 19:20:13 +0000 (12:20 -0700)]
Documentation: e100: Update the Intel 10/100 driver doc
Over the years, several of the links have changed or are no longer valid
so update them. In addition, the default values were incorrect for a
couple of parameters.
Converted the text file to the reStructuredText (RST) format, since the
Linux kernel documentation now uses this format for documentation.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Benjamin Poirier [Thu, 10 May 2018 07:28:35 +0000 (16:28 +0900)]
e1000e: Ignore TSYNCRXCTL when getting I219 clock attributes
There have been multiple reports of crashes that look like
kernel: RIP: 0010:[<
ffffffff8110303f>] timecounter_read+0xf/0x50
[...]
kernel: Call Trace:
kernel: [<
ffffffffa0806b0f>] e1000e_phc_gettime+0x2f/0x60 [e1000e]
kernel: [<
ffffffffa0806c5d>] e1000e_systim_overflow_work+0x1d/0x80 [e1000e]
kernel: [<
ffffffff810992c5>] process_one_work+0x155/0x440
kernel: [<
ffffffff81099e16>] worker_thread+0x116/0x4b0
kernel: [<
ffffffff8109f422>] kthread+0xd2/0xf0
kernel: [<
ffffffff8163184f>] ret_from_fork+0x3f/0x70
These can be traced back to the fact that e1000e_systim_reset() skips the
timecounter_init() call if e1000e_get_base_timinca() returns -EINVAL, which
leads to a null deref in timecounter_read().
Commit
83129b37ef35 ("e1000e: fix systim issues", v4.2-rc1) reworked
e1000e_get_base_timinca() in such a way that it can return -EINVAL for
e1000_pch_spt if the SYSCFI bit is not set in TSYNCRXCTL.
Some experimentation has shown that on I219 (e1000_pch_spt, "MAC: 12")
adapters, the E1000_TSYNCRXCTL_SYSCFI flag is unstable; TSYNCRXCTL reads
sometimes don't have the SYSCFI bit set. Retrying the read shortly after
finds the bit to be set. This was observed at boot (probe) but also link up
and link down.
Moreover, the phc (PTP Hardware Clock) seems to operate normally even after
reads where SYSCFI=0. Therefore, remove this register read and
unconditionally set the clock parameters.
Reported-by: Achim Mildenberger <admin@fph.physik.uni-karlsruhe.de>
Message-Id: <
20180425065243.g5mqewg5irkwgwgv@f2>
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=
1075876
Fixes:
83129b37ef35 ("e1000e: fix systim issues")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
kbuild test robot [Fri, 1 Jun 2018 19:46:13 +0000 (03:46 +0800)]
net: mvpp2: mvpp2_percpu_read_relaxed() can be static
Fixes:
db9d7d36eecc ("net: mvpp2: Split the PPv2 driver to a dedicated directory")
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 1 Jun 2018 16:23:02 +0000 (09:23 -0700)]
net/packet: refine check for priv area size
syzbot was able to trick af_packet again [1]
Various commits tried to address the problem in the past,
but failed to take into account V3 header size.
[1]
tpacket_rcv: packet too big, clamped from 72 to
4294967224. macoff=96
BUG: KASAN: use-after-free in prb_run_all_ft_ops net/packet/af_packet.c:1016 [inline]
BUG: KASAN: use-after-free in prb_fill_curr_block.isra.59+0x4e5/0x5c0 net/packet/af_packet.c:1039
Write of size 2 at addr
ffff8801cb62000e by task kworker/1:2/2106
CPU: 1 PID: 2106 Comm: kworker/1:2 Not tainted 4.17.0-rc7+ #77
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b9/0x294 lib/dump_stack.c:113
print_address_description+0x6c/0x20b mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
__asan_report_store2_noabort+0x17/0x20 mm/kasan/report.c:436
prb_run_all_ft_ops net/packet/af_packet.c:1016 [inline]
prb_fill_curr_block.isra.59+0x4e5/0x5c0 net/packet/af_packet.c:1039
__packet_lookup_frame_in_block net/packet/af_packet.c:1094 [inline]
packet_current_rx_frame net/packet/af_packet.c:1117 [inline]
tpacket_rcv+0x1866/0x3340 net/packet/af_packet.c:2282
dev_queue_xmit_nit+0x891/0xb90 net/core/dev.c:2018
xmit_one net/core/dev.c:3049 [inline]
dev_hard_start_xmit+0x16b/0xc10 net/core/dev.c:3069
__dev_queue_xmit+0x2724/0x34c0 net/core/dev.c:3584
dev_queue_xmit+0x17/0x20 net/core/dev.c:3617
neigh_resolve_output+0x679/0xad0 net/core/neighbour.c:1358
neigh_output include/net/neighbour.h:482 [inline]
ip6_finish_output2+0xc9c/0x2810 net/ipv6/ip6_output.c:120
ip6_finish_output+0x5fe/0xbc0 net/ipv6/ip6_output.c:154
NF_HOOK_COND include/linux/netfilter.h:277 [inline]
ip6_output+0x227/0x9b0 net/ipv6/ip6_output.c:171
dst_output include/net/dst.h:444 [inline]
NF_HOOK include/linux/netfilter.h:288 [inline]
ndisc_send_skb+0x100d/0x1570 net/ipv6/ndisc.c:491
ndisc_send_ns+0x3c1/0x8d0 net/ipv6/ndisc.c:633
addrconf_dad_work+0xbef/0x1340 net/ipv6/addrconf.c:4033
process_one_work+0xc1e/0x1b50 kernel/workqueue.c:2145
worker_thread+0x1cc/0x1440 kernel/workqueue.c:2279
kthread+0x345/0x410 kernel/kthread.c:240
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412
The buggy address belongs to the page:
page:
ffffea00072d8800 count:0 mapcount:-127 mapping:
0000000000000000 index:0xffff8801cb620e80
flags: 0x2fffc0000000000()
raw:
02fffc0000000000 0000000000000000 ffff8801cb620e80 00000000ffffff80
raw:
ffffea00072e3820 ffffea0007132d20 0000000000000002 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801cb61ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8801cb61ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
ffff8801cb620000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff8801cb620080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff8801cb620100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Fixes:
2b6867c2ce76 ("net/packet: fix overflow in check for priv area size")
Fixes:
dc808110bb62 ("packet: handle too big packets for PACKET_V3")
Fixes:
f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>