OSDN Git Service
Linux Build Service Account [Tue, 9 Jan 2018 23:40:14 +0000 (15:40 -0800)]
Merge "ASoC: msm: qdsp6v2: Update audio effects driver to support Instance ID"
Linux Build Service Account [Tue, 9 Jan 2018 23:40:12 +0000 (15:40 -0800)]
Merge "cnss2: Make WLAN host driver unregister work uninterruptible"
Linux Build Service Account [Tue, 9 Jan 2018 23:40:11 +0000 (15:40 -0800)]
Merge "cnss2: Ignore recovery if driver state is not proper"
Linux Build Service Account [Tue, 9 Jan 2018 23:40:00 +0000 (15:40 -0800)]
Merge "soc: qcom: hab: add some more logs"
Linux Build Service Account [Tue, 2 Jan 2018 20:25:52 +0000 (12:25 -0800)]
Merge "usb: f_gsi: Use required RNDIS IAD descriptors with full speed descriptors"
Yue Ma [Wed, 13 Dec 2017 23:26:21 +0000 (15:26 -0800)]
cnss2: Make WLAN host driver unregister work uninterruptible
Same as driver register work, driver unregister work event wait may
be woken up by signal and then exit. This is not expected for WLAN
host driver unregister and it should wait till timeout happens.
Change the work event wait to be uninterruptible.
Change-Id: I8d4af27e2f1f04c38917655e937fe8816504d860
Signed-off-by: Yue Ma <yuem@codeaurora.org>
Yue Ma [Tue, 12 Dec 2017 00:11:52 +0000 (16:11 -0800)]
cnss2: Ignore recovery if driver state is not proper
If WLAN host driver has already been unloaded, there is no need
to handle recovery. Add the check to make sure it exits from the
recovery.
Change-Id: Ia97c4cfe4b80ed8e046d041903842655bb915714
Signed-off-by: Yue Ma <yuem@codeaurora.org>
Mayank Rana [Fri, 10 Nov 2017 22:20:32 +0000 (14:20 -0800)]
usb: f_gsi: Use required RNDIS IAD descriptors with full speed descriptors
gsi_eth_fs_function is array of pointers to set of RNDIS interface
related descriptors. gsi_eth_fs_function's first descriptor is
pointing itself instead of required RNDIS IAD descriptor. This
results into out-of-bound read access while copying these set of
descriptors with usb_copy_descriptors() API. Fix this issue by
using required RNDIS IAD descriptor here.
Change-Id: Ic604221febc43eb8a22d8de99fb8cead74e13b41
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Linux Build Service Account [Tue, 2 Jan 2018 10:07:55 +0000 (02:07 -0800)]
Merge "msm: ipa: Remove unwanted gsi debug register reads"
Linux Build Service Account [Tue, 2 Jan 2018 10:07:54 +0000 (02:07 -0800)]
Merge "msm: adsprpc: Use unsigned integer for length values"
Linux Build Service Account [Sun, 31 Dec 2017 04:50:21 +0000 (20:50 -0800)]
Merge "ARM: dts: msm: Disable iommu test device on msm8996 vplatform"
Linux Build Service Account [Sun, 31 Dec 2017 04:50:20 +0000 (20:50 -0800)]
Merge "msm: ipa: Fix the handling of default IPA header"
Linux Build Service Account [Sun, 31 Dec 2017 04:50:17 +0000 (20:50 -0800)]
Merge "arm64: SW PAN: Update saved ttbr0 value on enter_lazy_tlb"
Linux Build Service Account [Sun, 31 Dec 2017 04:50:17 +0000 (20:50 -0800)]
Merge "arm64: SW PAN: Point saved ttbr0 at the zero page when switching to init_mm"
Linux Build Service Account [Sun, 31 Dec 2017 04:50:15 +0000 (20:50 -0800)]
Merge "Merge android-4.4.97 (
46d256d) into msm-4.4"
Linux Build Service Account [Sun, 31 Dec 2017 04:50:13 +0000 (20:50 -0800)]
Merge "TvTuner: Add support for TV tuner driver"
Linux Build Service Account [Sun, 31 Dec 2017 04:50:12 +0000 (20:50 -0800)]
Merge "ARM: dts: msm: Increase CAN reset time on msm8996 CV2X boards"
Linux Build Service Account [Sun, 31 Dec 2017 04:50:11 +0000 (20:50 -0800)]
Merge "ARM: dts: msm: Add option to ethernet node on msm8996 CV2X"
Linux Build Service Account [Sun, 31 Dec 2017 04:50:10 +0000 (20:50 -0800)]
Merge "gpio: usbdetect: Avoid threaded IRQ handling if no change in ID"
Linux Build Service Account [Sun, 31 Dec 2017 04:50:08 +0000 (20:50 -0800)]
Merge "msm: jpegdma: Fix for ASAN issues in jpegdma module"
Zhiqiang Tu [Mon, 25 Dec 2017 08:02:41 +0000 (16:02 +0800)]
ARM: dts: msm: Disable iommu test device on msm8996 vplatform
Disable iommu test device since guest os has no permission
to operate cpp_fd_smmu.
Change-Id: I9641d7ceb91f5c1bf4ee2307540730689dce7b98
Signed-off-by: Zhiqiang Tu <ztu@codeaurora.org>
Ghanim Fodi [Tue, 19 Dec 2017 17:15:19 +0000 (19:15 +0200)]
msm: ipa: Fix the handling of default IPA header
Default IPA header is added or deleted from the driver
directly and not by user space application. This change
prevents adding/deleting it from user application which
may cause inconsistencies in the driver. Also the change
fixes the header reset function to skip on the correct
default header.
Change-Id: Ic813433655411f1447db8b0c15efdf64038d8c26
CRs-fixed:
2151146
Signed-off-by: Ghanim Fodi <gfodi@codeaurora.org>
Will Deacon [Wed, 6 Dec 2017 10:51:12 +0000 (10:51 +0000)]
arm64: SW PAN: Update saved ttbr0 value on enter_lazy_tlb
enter_lazy_tlb is called when a kernel thread rides on the back of
another mm, due to a context switch or an explicit call to unuse_mm
where a call to switch_mm is elided.
In these cases, it's important to keep the saved ttbr value up to date
with the active mm, otherwise we can end up with a stale value which
points to a potentially freed page table.
This patch implements enter_lazy_tlb for arm64, so that the saved ttbr0
is kept up-to-date with the active mm for kernel threads.
Change-Id: I6e5c50542ff2645c46e8801685f7a43e6773c3d2
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: <stable@vger.kernel.org>
Fixes:
39bc88e5e38e9b21 ("arm64: Disable TTBR0_EL1 during normal kernel execution")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Git-commit:
d96cc49bff5a7735576cc6f6f111f875d101cec8
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Will Deacon [Wed, 6 Dec 2017 10:42:10 +0000 (10:42 +0000)]
arm64: SW PAN: Point saved ttbr0 at the zero page when switching to init_mm
update_saved_ttbr0 mandates that mm->pgd is not swapper, since swapper
contains kernel mappings and should never be installed into ttbr0. However,
this means that callers must avoid passing the init_mm to update_saved_ttbr0
which in turn can cause the saved ttbr0 value to be out-of-date in the context
of the idle thread. For example, EFI runtime services may leave the saved ttbr0
pointing at the EFI page table, and kernel threads may end up with stale
references to freed page tables.
This patch changes update_saved_ttbr0 so that the init_mm points the saved
ttbr0 value to the empty zero page, which always exists and never contains
valid translations. EFI and switch can then call into update_saved_ttbr0
unconditionally.
Change-Id: I664095969fbd4d0b546f30aa4c312769e708d6de
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: <stable@vger.kernel.org>
Fixes:
39bc88e5e38e9b21 ("arm64: Disable TTBR0_EL1 during normal kernel execution")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Git-commit:
0adbdfde8cfc9415aeed2a4955d2d17b3bd9bf13
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Ajay Agarwal [Mon, 11 Dec 2017 08:39:17 +0000 (14:09 +0530)]
gpio: usbdetect: Avoid threaded IRQ handling if no change in ID
It is observed that the hard ID IRQ is enabled when the
threaded IRQ handler for the same is still running. In that
case, there are two issues. The ID LOW IRQ can come
consecutively which will increase the disable count of
vbus_irq. Then ID HIGH IRQ will not enable the vbus_irq and
peripheral mode detection will not work anymore. The second
issue is that ID HIGH IRQ is fired just before ID LOW IRQ.
This will mark usb->id_state from HIGH to LOW even while
threaded IRQ is running which will lead to host not getting
stopped and peripheral mode not working.
Fix both issues by maintaning a local copy of ID IRQ in
threaded IRQ handler and comparing it with previous ID state.
If same, then bail out.
Change-Id: If5da1f91ece9d1751d7002e64bab0e145623a92e
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
Michael Adisumarta [Tue, 19 Dec 2017 02:12:35 +0000 (18:12 -0800)]
msm: ipa: Remove unwanted gsi debug register reads
This changes removes the unwanted gsi dedug register reads, to which
IPA driver dont have access to.
Change-Id: I6efb1045275a9bdb238e6184ec676013ab1678bc
Acked-by: Jyothi Jayanthi <jyothij@qti.qualcomm.com>
Signed-off-by: Michael Adisumarta <madisuma@codeaurora.org>
Rahul Sharma [Wed, 22 Nov 2017 13:03:04 +0000 (18:33 +0530)]
TvTuner: Add support for TV tuner driver
Add new dummy tv tuner driver and its documentation.
Update Makefile, Kconfig and add new tuner id type to msm_ba.h
Change-Id: I14f822ad9fdf85ea7509067d536c49fd24cf1609
Signed-off-by: Rahul Sharma <sharah@codeaurora.org>
Rahul Sharma [Tue, 14 Nov 2017 10:29:46 +0000 (15:59 +0530)]
ADV7481: Query lane_count and settle_count from device tree
Get lane count and settle count from device tree.
Add VIDIOC_G_CSI_PARAMS ioctl to pass lane count
and settle count values to userspace.
Change-Id: Ic0e0b7b402908c9970fd1771cf9bf19627f5a5d8
Signed-off-by: Rahul Sharma <sharah@codeaurora.org>
Tharun Kumar Merugu [Fri, 22 Dec 2017 12:26:46 +0000 (17:56 +0530)]
msm: adsprpc: Use unsigned integer for length values
As the length datatype is signed, supplying a negative number
can have undesired consequences. Always use unsigned integer
types for length values.
Change-Id: Ifde2f0d35129014b976507f7723a319c53fabddf
Acked-by: Thyagarajan Venkatanarayanan <venkatan@qti.qualcomm.com>
Signed-off-by: Tharun Kumar Merugu <mtharu@codeaurora.org>
Yong Ding [Mon, 18 Dec 2017 10:20:44 +0000 (18:20 +0800)]
soc: qcom: hab: add some more logs
With this, it becomes clear to know it is HAB's log and
which line of which function shows the log. Moreover, it
is helpful for issue debugging with those prepared logs.
Change-Id: I9641e779f592a5be7750885228cac6374880c301
Signed-off-by: Yong Ding <yongding@codeaurora.org>
Linux Build Service Account [Fri, 22 Dec 2017 05:18:19 +0000 (21:18 -0800)]
Merge "ASoC: msm: qdsp6v2: Add common items needed for Instance ID"
Gustavo Solaira [Wed, 20 Dec 2017 05:14:26 +0000 (21:14 -0800)]
ARM: dts: msm: Increase CAN reset time on msm8996 CV2X boards
Increase the CAN controller reset time to 200ms on msm8996
CV2X boards. This is the time we expect the CAN micro-controller
will take to complete its boot up process.
Change-Id: Ib70a8ac6eb296558a42eb7d34b73a384c7b7e8c8
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Linux Build Service Account [Thu, 21 Dec 2017 16:50:05 +0000 (08:50 -0800)]
Merge "soc: qcom: pil: Align size of MBA and DP image to 4k"
Linux Build Service Account [Thu, 21 Dec 2017 16:50:04 +0000 (08:50 -0800)]
Merge "power: qpnp-fg-gen3: Improve ESR accuracy at cold temperature with Qnovo"
Kyle Yan [Thu, 11 May 2017 18:15:31 +0000 (11:15 -0700)]
soc: qcom: pil: Align size of MBA and DP image to 4k
Image address and size must be aligned to 4k as the SMMU works on a
4k granularity.
Change-Id: I4780aa67f09796ec0a8dd5b62da0e9a99c50e596
Signed-off-by: Kyle Yan <kyan@codeaurora.org>
Linux Build Service Account [Thu, 21 Dec 2017 06:30:16 +0000 (22:30 -0800)]
Merge "leds: qpnp-flash-v2: Return error code separately during current prediction"
Linux Build Service Account [Thu, 21 Dec 2017 06:30:15 +0000 (22:30 -0800)]
Merge "icnss: Do not send uevent when driver is unloading"
Linux Build Service Account [Thu, 21 Dec 2017 06:30:14 +0000 (22:30 -0800)]
Merge "ARM: dts: msm: Enable LDO26 for CDP targets"
Linux Build Service Account [Thu, 21 Dec 2017 06:30:13 +0000 (22:30 -0800)]
Merge "usb: gadget: ffs: change gfp_flags to GFP_ATOMIC"
Aditya Bavanari [Mon, 17 Apr 2017 23:29:27 +0000 (16:29 -0700)]
ASoC: msm: qdsp6v2: Update audio effects driver to support Instance ID
Add support to set and get audio effects module params with
Instance ID support. Maintain support for non
Instance ID set and get param structures as well.
Use common pack and set param functions to set and
get parameters to DSP instead of handling them at an
individual module level.
CRs-Fixed:
2151551
Change-Id: I62342d434fc5bd58c06d22913683d7d0fd602da9
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Aditya Bavanari [Thu, 29 Jun 2017 22:33:43 +0000 (15:33 -0700)]
ASoC: msm: qdsp6v2: Update ASM driver to support Instance ID
Add support to set and get ASM module params with
Instance ID support. Maintain support for non
Instance ID set and get param structures as well.
Use common pack and set param functions to set and
get parameters to DSP instead of handling them at an
individual module level.
CRs_Fixed:
2151551
Change-Id: I48a0f0f856d8b8b59b7e7361fae63283e0f87948
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Aditya Bavanari [Wed, 5 Jul 2017 22:23:35 +0000 (15:23 -0700)]
ASoC: msm: qdsp6v2: Update dap driver to support Instance ID
Add support to set and get dap modules params with
Instance ID support for both Dolby and DS2.
Maintain support for non Instance ID set and get param
structures as well. Use common pack and set param
functions to set and get parameters to DSP instead of
handling them at an individual module level.
CRs-Fixed:
2151551
Change-Id: Ic2722cf5d686a7b10c682ca7866f7900da9d0cdb
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Aditya Bavanari [Wed, 19 Apr 2017 21:38:30 +0000 (14:38 -0700)]
ASoC: msm: qdsp6v2: Update ADM driver to support Instance ID
Add support to set and get ADM module params with
Instance ID support. Maintain support for non
Instance ID set and get param structures as well.
Use common pack and set param functions to set and
get parameters to DSP instead of handling them at an
individual module level.
CRs-Fixed:
2151551
Change-Id: Ida9591e96501a2edbffe080eb8531c860bde8539
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Aditya Bavanari [Fri, 23 Jun 2017 21:51:55 +0000 (14:51 -0700)]
ASoC: msm: qdsp6v2: Update rtac driver to support Instance ID
Add support to set and get rtac params with
Instance ID support. Maintain support for non
Instance ID set and get param structures as well.
Use common pack and set param functions to set and
get parameters to DSP instead of handling them at an
individual module level.
CRs-Fixed:
2151551
Change-Id: Ic07cb109b9e469dccf510f89ba9917e8c9eccbd8
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Aditya Bavanari [Tue, 25 Apr 2017 20:35:56 +0000 (13:35 -0700)]
ASoC: msm: qdsp6v2: Update AFE driver to support Instance ID
Add support to set and get AFE module params with
Instance ID support. Maintain support for non
Instance ID set and get param structures as well.
Use common pack and set param functions to set and
get parameters to DSP instead of handling them at an
individual module level.
CRs-Fixed:
2151551
Change-Id: I9f2cc097a0f1a99a4639bb0cd636500b41a41b1b
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Aditya Bavanari [Fri, 21 Apr 2017 17:17:44 +0000 (10:17 -0700)]
ASoC: msm: qdsp6v2: Update voice driver to support Instance ID
Add support to set and get voice module params with
Instance ID support. Maintain support for non
Instance ID set and get param structures as well.
Use common pack and set param functions to set and
get parameters to DSP instead of handling them at an
individual module level.
CRs-Fixed:
2151551
Change-Id: If18c89ef6e0e98419d271923387eae10d45cb7f3
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Aditya Bavanari [Fri, 14 Apr 2017 19:52:20 +0000 (12:52 -0700)]
ASoC: msm: qdsp6v2: Update LSM driver to support Instance ID
Add support to set and get LSM module params with
Instance ID support. Maintain support for non
Instance ID set and get param structures as well.
CRs-Fixed:
2151551
Change-Id: I138cceb5165443da899e7c152fd6c8a05a6efe98
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Aditya Bavanari [Mon, 25 Sep 2017 19:51:30 +0000 (12:51 -0700)]
ASoC: msm: qdsp6v2: Add common items needed for Instance ID
Add common headers and functions needed to support instance ID.
CRs-Fixed:
2151551
Change-Id: I8a167be29cdb5c365ac957530789007e90a91a97
Signed-off-by: Siena Richard <sienar@codeaurora.org>
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Subbaraman Narayanamurthy [Fri, 1 Dec 2017 18:54:40 +0000 (10:54 -0800)]
power: qpnp-fg-gen3: Improve ESR accuracy at cold temperature with Qnovo
When the battery is in cold temperature for a certain amount of
time and device is charged with Qnovo enabled charging, ESR pulse
will fire less frequently. This along with ESR pulses not getting
qualified can cause the ESR to be less accurate. To improve ESR
accuracy, add change to apply relaxed filter coefficients once
the battery temperature starts ramping up after hitting a lower
threshold of say 6 C after charging begins.
CRs-Fixed:
2151708
Change-Id: Iff6c2ffbab1f327dfefcf1550213c37df4a8ad42
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Linux Build Service Account [Wed, 20 Dec 2017 20:37:48 +0000 (12:37 -0800)]
Merge "defconfig: msm8998: Enable kernel AIO support"
Linux Build Service Account [Wed, 20 Dec 2017 20:37:47 +0000 (12:37 -0800)]
Merge "msm: ipa: add new IP filtering bitmaps"
Linux Build Service Account [Wed, 20 Dec 2017 20:37:46 +0000 (12:37 -0800)]
Merge "msm: ipa: Change error value for set quota"
Linux Build Service Account [Wed, 20 Dec 2017 20:37:45 +0000 (12:37 -0800)]
Merge "ARM: dts: msm: Remove blsp1_uart2 on msm8996 telematics vplatform"
Yuanyuan Liu [Sat, 16 Dec 2017 00:20:37 +0000 (16:20 -0800)]
icnss: Do not send uevent when driver is unloading
If modem crashed during wlan driver unloading, icnss driver
will call driver uevent callback to send FW down uevent when
it receives BEFORE_SHUTDOWN notification. If wlan driver is
de-initialized just before the callback is called, kernel will
panic as driver's context is freed. This can be avoid by not
sending uevent when wlan host driver is unloading. Instead,
icnss driver will provide an API to host driver to check if
WLAN FW is down or not.
CRs-Fixed:
2161425
Change-Id: I569fd85366522606ececeda74df85c51b9b2fc28
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Rahul Sharma [Tue, 19 Dec 2017 06:42:40 +0000 (12:12 +0530)]
ARM: dts: msm: Enable LDO26 for CDP targets
Camera bridge chip is not getting detected on CDP for automotive platform.
Defined and added regulator LDO26 which needs to be turned on for the chip
to be detected.
Change-Id: I0400bf1430d588852d4143e7b28f33927614ee90
Signed-off-by: Rahul Sharma <sharah@codeaurora.org>
Vijayavardhan Vennapusa [Fri, 15 Dec 2017 07:11:15 +0000 (12:41 +0530)]
defconfig: msm8998: Enable kernel AIO support
New Android versions are using kernel AIO functionality for adb &
MTP interfaces for better performance. Hence enable CONFIG_AIO to
support same.
Change-Id: I8bfd6c631642f60390ee656e10d666766749f7b3
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Linux Build Service Account [Wed, 20 Dec 2017 06:27:53 +0000 (22:27 -0800)]
Merge "msm: Array bounds check for buffer index"
Linux Build Service Account [Wed, 20 Dec 2017 06:27:52 +0000 (22:27 -0800)]
Merge "ARM: dts: msm: update route map for sdm660 internal codec"
Linux Build Service Account [Wed, 20 Dec 2017 06:27:50 +0000 (22:27 -0800)]
Merge "ALSA: pcm: use lock to protect substream runtime resource"
Linux Build Service Account [Wed, 20 Dec 2017 06:27:48 +0000 (22:27 -0800)]
Merge "ALSA: pcm: remove unused variable from snd_pcm_info()"
Linux Build Service Account [Wed, 20 Dec 2017 06:27:47 +0000 (22:27 -0800)]
Merge "ASoC: apr: Add validity check to APR port"
Linux Build Service Account [Wed, 20 Dec 2017 06:27:46 +0000 (22:27 -0800)]
Merge "ASoC: msm: qdsp6v2: Set freed pointers to NULL"
Linux Build Service Account [Wed, 20 Dec 2017 06:27:43 +0000 (22:27 -0800)]
Merge "ARM: dts: msm: add support for TDM interfaces on msm8996 MTP"
Linux Build Service Account [Wed, 20 Dec 2017 06:27:42 +0000 (22:27 -0800)]
Merge "ASoC: sdm660_cdc: Fix pop noise when device switch"
Linux Build Service Account [Wed, 20 Dec 2017 06:27:41 +0000 (22:27 -0800)]
Merge "soc: qcom: glink_smem_native_xport: Send blocked signal command"
Linux Build Service Account [Wed, 20 Dec 2017 06:27:40 +0000 (22:27 -0800)]
Merge "ARM: dts: msm: Remove spi_9 and i2c_8 in msm8996 ivi vplatform"
Liangliang Lu [Wed, 20 Dec 2017 03:13:00 +0000 (11:13 +0800)]
usb: gadget: ffs: change gfp_flags to GFP_ATOMIC
usb_ep_alloc_request() may sleep with current flag
GFP_KERNEL, but it is in atomic context, change
flag to GFP_ATOMIC to fix this issue.
Change-Id: Ic43a25f0a504d7fed104e636a9a614a4398820ab
Signed-off-by: Liangliang Lu <luliang@codeaurora.org>
Linux Build Service Account [Tue, 19 Dec 2017 21:24:09 +0000 (13:24 -0800)]
Merge "power: qpnp-fg-gen3: Update ESR filter coefficients for low temperature"
Shihuan Liu [Fri, 4 Aug 2017 18:00:00 +0000 (11:00 -0700)]
msm: ipa: add new IP filtering bitmaps
Add new IP filtering bitmaps to match TCP SYN packets.
Change-Id: I73ab2944c3d351fdb57f147d3efedd1b5829835e
Acked-by: Pooja Kumari <kumarip@qti.qualcomm.com>
Signed-off-by: Mohammed Javid <mjavid@codeaurora.org>
Acked-by: Shihuan Liu <shihuanl@qti.qualcomm.com>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
Mohammed Javid [Thu, 14 Dec 2017 07:19:05 +0000 (12:49 +0530)]
msm: ipa: Change error value for set quota
Currently IPA send common error -EFAULT to user space
in case of IOCTL fails. Change error value for set quota
based on error received from modem.
Change-Id: Ib6ba487a186245ddf752cd08de12293af1ea1bb9
Acked-by: Pooja Kumari <kumarip@qti.qualcomm.com>
Signed-off-by: Mohammed Javid <mjavid@codeaurora.org>
Linux Build Service Account [Tue, 19 Dec 2017 10:33:31 +0000 (02:33 -0800)]
Merge "ARM: dts: msm: add vwatchdog and memdump for gvm on msm8996"
Linux Build Service Account [Tue, 19 Dec 2017 10:33:30 +0000 (02:33 -0800)]
Merge "qseecom: resend continue blocked listener request"
Zhiqiang Tu [Tue, 19 Dec 2017 06:27:02 +0000 (14:27 +0800)]
ARM: dts: msm: Remove spi_9 and i2c_8 in msm8996 ivi vplatform
Remove spi_9 and i2c_8 since they are not needed.
Change-Id: I1fe4d722e79ebdc5e779f974ca51cc8a8424d564
Signed-off-by: Zhiqiang Tu <ztu@codeaurora.org>
Zhiqiang Tu [Tue, 19 Dec 2017 06:17:32 +0000 (14:17 +0800)]
ARM: dts: msm: Remove blsp1_uart2 on msm8996 telematics vplatform
Remove blsp1_uart2 since it is not needed.
Change-Id: If412f12cb1fd455cc7d4e7698d0c202ad80f35ae
Signed-off-by: Zhiqiang Tu <ztu@codeaurora.org>
Linux Build Service Account [Mon, 18 Dec 2017 23:25:05 +0000 (15:25 -0800)]
Merge "ARM: dts: msm: Add new device properties for msm8996 agave"
Linux Build Service Account [Mon, 18 Dec 2017 23:25:04 +0000 (15:25 -0800)]
Merge "defconfig: msm: add vwatchdog and memdump for gvm"
Linux Build Service Account [Mon, 18 Dec 2017 23:25:02 +0000 (15:25 -0800)]
Merge "drm/mm: Fix NULL pointer dereference in allocator"
Linux Build Service Account [Mon, 18 Dec 2017 23:25:02 +0000 (15:25 -0800)]
Merge "drm/msm: Set proper GEM address space range for drm mm allocator"
Zhen Kong [Sat, 2 Dec 2017 02:26:25 +0000 (18:26 -0800)]
qseecom: resend continue blocked listener request
When new cmd with session_id is not supported by TZ, resend
continue blocked listener request with legacy cmd using app_id.
Also set dummy app_id in qseecom_process_listener_from_smcinvoke
to support legacy cmd.
Change-Id: Icafc77cece23daff0f2ceb89c10e82a822eb582a
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
Yong Ding [Fri, 24 Nov 2017 10:12:21 +0000 (18:12 +0800)]
soc: qcom: hab: add some code clean up
Add some code clean up for hab driver, including removing
implicit type conversion, and etc.
Change-Id: Ic2910f48063e22d1708972c1e0a5d23cbf179874
Signed-off-by: Yong Ding <yongding@codeaurora.org>
Yong Ding [Wed, 29 Nov 2017 05:55:51 +0000 (13:55 +0800)]
soc: qcom: hab: fix issues in multi-threads cases
In multi-threads stress tests, some synchronization issues
were found. Here are the fixes for them.
Change-Id: I43a1fef5771af08f3fe7c0be486cc2d36667e773
Signed-off-by: Yong Ding <yongding@codeaurora.org>
Yong Ding [Thu, 23 Nov 2017 09:42:15 +0000 (17:42 +0800)]
soc: qcom: hab: use separated irq for each pchan
Before this change, all physical channels share only one single irq
issued by only one single virtual shmem device from hypervisor.
To achieve better performance, each physical channel will be built
on top of one virtual shmem device with its own irq.
Change-Id: I5bf42896883865908c80df75f848174f4acf3717
Signed-off-by: Yong Ding <yongding@codeaurora.org>
Yong Ding [Mon, 27 Nov 2017 09:26:03 +0000 (17:26 +0800)]
soc: qcom: hab: add multi-GVMs support
This is the new feature to support multiple Guest Virtual
Machiness communications.
In the past, HAB driver supported the communication between
only one single GVM and the host machine. With this new
feature, more than one GVMs can communicate with the host
machine over HAB driver.
Change-Id: I22eb17b7cf367e25e2d829d9dbd2d3a3463be1e8
Signed-off-by: Yong Ding <yongding@codeaurora.org>
Linux Build Service Account [Mon, 18 Dec 2017 09:19:12 +0000 (01:19 -0800)]
Merge "ARM: dts: msm: memory rework for gvm on msm8996"
Srinivasarao P [Mon, 18 Dec 2017 08:44:52 +0000 (14:14 +0530)]
Merge android-4.4.97 (
46d256d) into msm-4.4
* refs/heads/tmp-
46d256d
Linux 4.4.97
staging: r8712u: Fix Sparse warning in rtl871x_xmit.c
xen: don't print error message in case of missing Xenstore entry
bt8xx: fix memory leak
s390/dasd: check for device error pointer within state change interrupts
mei: return error on notification request to a disconnected client
exynos4-is: fimc-is: Unmap region obtained by of_iomap()
staging: lustre: ptlrpc: skip lock if export failed
staging: lustre: hsm: stack overrun in hai_dump_data_field
staging: lustre: llite: don't invoke direct_IO for the EOF case
platform/x86: intel_mid_thermal: Fix module autoload
scsi: aacraid: Process Error for response I/O
xen/manage: correct return value check on xenbus_scanf()
cx231xx: Fix I2C on Internal Master 3 Bus
perf tools: Only increase index if perf_evsel__new_idx() succeeds
drm/amdgpu: when dpm disabled, also need to stop/start vce.
i2c: riic: correctly finish transfers
ext4: do not use stripe_width if it is not set
ext4: fix stripe-unaligned allocations
staging: rtl8712u: Fix endian settings for structs describing network packets
mfd: axp20x: Fix axp288 PEK_DBR and PEK_DBF irqs being swapped
mfd: ab8500-sysctrl: Handle probe deferral
ARM: pxa: Don't rely on public mmc header to include leds.h
mmc: s3cmci: include linux/interrupt.h for tasklet_struct
PM / wakeirq: report a wakeup_event on dedicated wekup irq
Fix tracing sample code warning.
tracing/samples: Fix creation and deletion of simple_thread_fn creation
drm/msm: fix an integer overflow test
drm/msm: Fix potential buffer overflow issue
perf tools: Fix build failure on perl script context
ocfs2: fstrim: Fix start offset of first cluster group during fstrim
ARM: 8715/1: add a private asm/unaligned.h
ARM: dts: mvebu: pl310-cache disable double-linefill
arm64: ensure __dump_instr() checks addr_limit
ASoC: adau17x1: Workaround for noise bug in ADC
KEYS: fix out-of-bounds read during ASN.1 parsing
KEYS: return full count in keyring_read() if buffer is too small
cifs: check MaxPathNameComponentLength != 0 before using it
ALSA: seq: Fix nested rwsem annotation for lockdep splat
ALSA: timer: Add missing mutex lock for compat ioctls
BACKPORT: xfrm: Clear sk_dst_cache when applying per-socket policy.
Revert "ANDROID: sched/rt: schedtune: Add boost retention to RT"
cpufreq: Drop schedfreq governor
ANDROID: sched/rt: schedtune: Add boost retention to RT
ANDROID: sched/rt: add schedtune accounting
ANDROID: Revert "arm64: move ELF_ET_DYN_BASE to 4GB / 4MB"
ANDROID: Revert "arm: move ELF_ET_DYN_BASE to 4MB"
sched: EAS: Fix the calculation of group util in group_idle_state()
sched: EAS: update trg_cpu to backup_cpu if no energy saving for target_cpu
sched: EAS: Fix the condition to distinguish energy before/after
Conflicts:
drivers/cpufreq/Kconfig
drivers/gpu/drm/msm/msm_gem_submit.c
kernel/sched/core.c
kernel/sched/fair.c
kernel/sched/rt.c
kernel/sched/sched.h
Change-Id: I0d8c5287cb67fd47c8944a002c0ca71adcdef537
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
Aditya Bavanari [Wed, 22 Nov 2017 07:21:05 +0000 (12:51 +0530)]
ASoC: apr: Add validity check to APR port
Add boundary checks for APR port received from ADSP.
CRs-Fixed:
2143207
Change-Id: I9a7fa39ee223e1859323caa6eb74c1c8a26a041d
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Rahul Sharma [Tue, 14 Nov 2017 10:50:13 +0000 (16:20 +0530)]
ARM: dts: msm: Add new device properties for msm8996 agave
Add lane_count, settle_count and resolution array
device properties to adv7481 device on msm8996 agave.
Change-Id: I512d3f7339905cb67613ca706c978f23dde599ae
Signed-off-by: Rahul Sharma <sharah@codeaurora.org>
Yimin Peng [Thu, 30 Nov 2017 11:58:13 +0000 (19:58 +0800)]
ARM: dts: msm: add vwatchdog and memdump for gvm on msm8996
Add devices for virtual watchdong and memory dump function.
Change-Id: Ic3d26e8438cd2fcd4fcf0a6091ecd40ffa956c22
Signed-off-by: Yimin Peng <yiminp@codeaurora.org>
Yimin Peng [Thu, 30 Nov 2017 11:51:10 +0000 (19:51 +0800)]
defconfig: msm: add vwatchdog and memdump for gvm
add support to virtual watchdog and memory dump function.
Change-Id: If585e8e900487818d12cce9592c357f9a5ccfe7e
Signed-off-by: Yimin Peng <yiminp@codeaurora.org>
Linux Build Service Account [Sun, 17 Dec 2017 16:28:55 +0000 (08:28 -0800)]
Merge "serial: msm_serial_hs: Allow system suspend when no client is active"
Linux Build Service Account [Sat, 16 Dec 2017 08:56:46 +0000 (00:56 -0800)]
Merge "qseecom: support listener request from smcinvoke without reentrancy"
Linux Build Service Account [Sat, 16 Dec 2017 08:56:45 +0000 (00:56 -0800)]
Merge "qseecom: fix an issue when requested listener svc id does not exist"
Gustavo Solaira [Sat, 16 Dec 2017 03:06:41 +0000 (19:06 -0800)]
ARM: dts: msm: Add option to ethernet node on msm8996 CV2X
The ethernet chip has the PERST connected to its reset pin
on msm8996 CV2X boards so it has to be fully reset after
system resume, add this flag so the driver can perform the
correct operation.
Change-Id: I97ecddb4fd7830081c5af7dc9578466e995bb9dd
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Zhen Kong [Thu, 19 Oct 2017 19:32:07 +0000 (12:32 -0700)]
qseecom: support listener request from smcinvoke without reentrancy
Add support to process listener request from smcinvoke when
reentrancy is disabled.
Change-Id: I2ce030cf6d5104ca2dec1402634a05d425e6d474
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
Linux Build Service Account [Fri, 15 Dec 2017 22:14:38 +0000 (14:14 -0800)]
Merge "adv7481: Remove conditional compilation for PM functions"
Linux Build Service Account [Fri, 15 Dec 2017 22:14:37 +0000 (14:14 -0800)]
Merge "drm/msm: Correctly retrieve gpu's active power level"
Linux Build Service Account [Fri, 15 Dec 2017 22:14:36 +0000 (14:14 -0800)]
Merge "ARM: dts: msm: blsp and sdhci switch to virtual clock on msm8996 vplatform"
Linux Build Service Account [Fri, 15 Dec 2017 22:14:35 +0000 (14:14 -0800)]
Merge "clk: msm: virtual clock adds support for usb, lpass and modem"
Linux Build Service Account [Fri, 15 Dec 2017 22:14:34 +0000 (14:14 -0800)]
Merge "msm: ipa: Fix to validate routing table index for filter exception"
Linux Build Service Account [Fri, 15 Dec 2017 22:14:33 +0000 (14:14 -0800)]
Merge "msm: mdss: Trigger idle fallback when no update due to touch"