OSDN Git Service
Richard Henderson [Sat, 8 Feb 2020 12:58:13 +0000 (12:58 +0000)]
target/arm: Add ID_AA64MMFR2_EL1
Add definitions for all of the fields, up to ARMv8.5.
Convert the existing RESERVED register to a full register.
Query KVM for the value of the register for the host.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200208125816.14954-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Sat, 8 Feb 2020 12:58:12 +0000 (12:58 +0000)]
target/arm: Enable ARMv8.2-ATS1E1 in -cpu max
This includes enablement of ARMv8.1-PAN.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200208125816.14954-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Sat, 8 Feb 2020 12:58:11 +0000 (12:58 +0000)]
target/arm: Implement ATS1E1 system registers
This is a minor enhancement over ARMv8.1-PAN.
The *_PAN mmu_idx are used with the existing do_ats_write.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200208125816.14954-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Sat, 8 Feb 2020 12:58:10 +0000 (12:58 +0000)]
target/arm: Set PAN bit as required on exception entry
The PAN bit is preserved, or set as per SCTLR_ELx.SPAN,
plus several other conditions listed in the ARM ARM.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
20200208125816.14954-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Sat, 8 Feb 2020 12:58:09 +0000 (12:58 +0000)]
target/arm: Enforce PAN semantics in get_S1prot
If we have a PAN-enforcing mmu_idx, set prot == 0 if user_rw != 0.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200208125816.14954-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Sat, 8 Feb 2020 12:58:08 +0000 (12:58 +0000)]
target/arm: Update arm_mmu_idx_el for PAN
Examine the PAN bit for EL1, EL2, and Secure EL1 to
determine if it applies.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200208125816.14954-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Sat, 8 Feb 2020 12:58:07 +0000 (12:58 +0000)]
target/arm: Update MSR access for PAN
For aarch64, there's a dedicated msr (imm, reg) insn.
For aarch32, this is done via msr to cpsr. Writes from el0
are ignored, which is already handled by the CPSR_USER mask.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200208125816.14954-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Sat, 8 Feb 2020 12:58:06 +0000 (12:58 +0000)]
target/arm: Introduce aarch64_pstate_valid_mask
Use this along the exception return path, where we previously
accepted any values.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200208125816.14954-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Sat, 8 Feb 2020 12:58:05 +0000 (12:58 +0000)]
target/arm: Remove CPSR_RESERVED
The only remaining use was in op_helper.c. Use PSTATE_SS
directly, and move the commentary so that it is more obvious
what is going on.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
20200208125816.14954-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Sat, 8 Feb 2020 12:58:04 +0000 (12:58 +0000)]
target/arm: Use aarch32_cpsr_valid_mask in helper_exception_return
Using ~0 as the mask on the aarch64->aarch32 exception return
was not even as correct as the CPSR_ERET_MASK that we had used
on the aarch32->aarch32 exception return.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200208125816.14954-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Sat, 8 Feb 2020 12:58:03 +0000 (12:58 +0000)]
target/arm: Replace CPSR_ERET_MASK with aarch32_cpsr_valid_mask
CPSR_ERET_MASK was a useless renaming of CPSR_RESERVED.
The function also takes into account bits that the cpu
does not support.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200208125816.14954-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Sat, 8 Feb 2020 12:58:02 +0000 (12:58 +0000)]
target/arm: Mask CPSR_J when Jazelle is not enabled
The J bit signals Jazelle mode, and so of course is RES0
when the feature is not enabled.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
20200208125816.14954-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Sat, 8 Feb 2020 12:58:01 +0000 (12:58 +0000)]
target/arm: Split out aarch32_cpsr_valid_mask
Split this helper out of msr_mask in translate.c. At the same time,
transform the negative reductive logic to positive accumulative logic.
It will be usable along the exception paths.
While touching msr_mask, fix up formatting.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
20200208125816.14954-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Sat, 8 Feb 2020 12:58:00 +0000 (12:58 +0000)]
target/arm: Move LOR regdefs to file scope
For static const regdefs, file scope is preferred.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200208125816.14954-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Sat, 8 Feb 2020 12:57:59 +0000 (12:57 +0000)]
target/arm: Add isar_feature tests for PAN + ATS1E1
Include definitions for all of the bits in ID_MMFR3.
We already have a definition for ID_AA64MMFR1.PAN.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200208125816.14954-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Sat, 8 Feb 2020 12:57:58 +0000 (12:57 +0000)]
target/arm: Add mmu_idx for EL1 and EL2 w/ PAN enabled
To implement PAN, we will want to swap, for short periods
of time, to a different privileged mmu_idx. In addition,
we cannot do this with flushing alone, because the AT*
instructions have both PAN and PAN-less versions.
Add the ARMMMUIdx*_PAN constants where necessary next to
the corresponding ARMMMUIdx* constant.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200208125816.14954-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Sat, 8 Feb 2020 12:57:57 +0000 (12:57 +0000)]
target/arm: Add arm_mmu_idx_is_stage1_of_2
Use a common predicate for querying stage1-ness.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200208125816.14954-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Heyi Guo [Tue, 4 Feb 2020 01:43:25 +0000 (09:43 +0800)]
virt/acpi: update golden masters for DSDT update
Differences between disassembled ASL files:
@@ -5,13 +5,13 @@
*
* Disassembling to symbolic ASL+ operators
*
- * Disassembly of DSDT, Thu Jan 23 16:00:04 2020
+ * Disassembly of DSDT.new, Thu Jan 23 16:47:12 2020
*
* Original Table Header:
* Signature "DSDT"
- * Length 0x0000481E (18462)
+ * Length 0x000014BB (5307)
* Revision 0x02
- * Checksum 0x60
+ * Checksum 0xD1
* OEM ID "BOCHS "
* OEM Table ID "BXPCDSDT"
* OEM Revision 0x00000001 (1)
@@ -43,7 +43,6 @@ DefinitionBlock ("", "DSDT", 2, "BOCHS ", "BXPCDSDT", 0x00000001)
0x00000021,
}
})
- Name (_ADR, 0x09000000) // _ADR: Address
}
Device (FLS0)
@@ -668,11 +667,10 @@ DefinitionBlock ("", "DSDT", 2, "BOCHS ", "BXPCDSDT", 0x00000001)
Name (_CID, "PNP0A03" /* PCI Bus */) // _CID: Compatible ID
Name (_SEG, Zero) // _SEG: PCI Segment
Name (_BBN, Zero) // _BBN: BIOS Bus Number
- Name (_ADR, Zero) // _ADR: Address
Name (_UID, "PCI0") // _UID: Unique ID
Name (_STR, Unicode ("PCIe 0 Device")) // _STR: Description String
Name (_CCA, One) // _CCA: Cache Coherency Attribute
- Name (_PRT, Package (0x0400) // _PRT: PCI Routing Table
+ Name (_PRT, Package (0x80) // _PRT: PCI Routing Table
{
Package (0x04)
{
@@ -1696,7174 +1694,6 @@ DefinitionBlock ("", "DSDT", 2, "BOCHS ", "BXPCDSDT", 0x00000001)
0x03,
GSI2,
Zero
- },
-
- Package (0x04)
- {
- 0x0020FFFF,
- Zero,
- GSI0,
- Zero
- },
-
- *Omit the other (4 * (256 - 32) - 2) packages*
-
- Package (0x04)
- {
- 0x00FFFFFF,
- 0x03,
- GSI2,
- Zero
}
})
Device (GSI0)
@@ -8892,7 +1722,7 @@ DefinitionBlock ("", "DSDT", 2, "BOCHS ", "BXPCDSDT", 0x00000001)
Device (GSI1)
{
Name (_HID, "PNP0C0F" /* PCI Interrupt Link Device */) // _HID: Hardware ID
- Name (_UID, Zero) // _UID: Unique ID
+ Name (_UID, One) // _UID: Unique ID
Name (_PRS, ResourceTemplate () // _PRS: Possible Resource Settings
{
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
@@ -8915,7 +1745,7 @@ DefinitionBlock ("", "DSDT", 2, "BOCHS ", "BXPCDSDT", 0x00000001)
Device (GSI2)
{
Name (_HID, "PNP0C0F" /* PCI Interrupt Link Device */) // _HID: Hardware ID
- Name (_UID, Zero) // _UID: Unique ID
+ Name (_UID, 0x02) // _UID: Unique ID
Name (_PRS, ResourceTemplate () // _PRS: Possible Resource Settings
{
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
@@ -8938,7 +1768,7 @@ DefinitionBlock ("", "DSDT", 2, "BOCHS ", "BXPCDSDT", 0x00000001)
Device (GSI3)
{
Name (_HID, "PNP0C0F" /* PCI Interrupt Link Device */) // _HID: Hardware ID
- Name (_UID, Zero) // _UID: Unique ID
+ Name (_UID, 0x03) // _UID: Unique ID
Name (_PRS, ResourceTemplate () // _PRS: Possible Resource Settings
{
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
@@ -8965,37 +1795,6 @@ DefinitionBlock ("", "DSDT", 2, "BOCHS ", "BXPCDSDT", 0x00000001)
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
- Name (RBUF, ResourceTemplate ()
- {
- WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
- 0x0000, // Granularity
- 0x0000, // Range Minimum
- 0x00FF, // Range Maximum
- 0x0000, // Translation Offset
- 0x0100, // Length
- ,, )
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite,
- 0x00000000, // Granularity
- 0x10000000, // Range Minimum
- 0x3EFEFFFF, // Range Maximum
- 0x00000000, // Translation Offset
- 0x2EFF0000, // Length
- ,, , AddressRangeMemory, TypeStatic)
- DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
- 0x00000000, // Granularity
- 0x00000000, // Range Minimum
- 0x0000FFFF, // Range Maximum
- 0x3EFF0000, // Translation Offset
- 0x00010000, // Length
- ,, , TypeStatic, DenseTranslation)
- QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite,
- 0x0000000000000000, // Granularity
- 0x0000008000000000, // Range Minimum
- 0x000000FFFFFFFFFF, // Range Maximum
- 0x0000000000000000, // Translation Offset
- 0x0000008000000000, // Length
- ,, , AddressRangeMemory, TypeStatic)
- })
Return (ResourceTemplate ()
{
WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
@@ -9080,11 +1879,6 @@ DefinitionBlock ("", "DSDT", 2, "BOCHS ", "BXPCDSDT", 0x00000001)
})
}
- Device (RP0)
- {
- Name (_ADR, Zero) // _ADR: Address
- }
-
Device (RES0)
{
Name (_HID, "PNP0C02" /* PNP Motherboard Resources */) // _HID: Hardware ID
@@ -9131,7 +1925,6 @@ DefinitionBlock ("", "DSDT", 2, "BOCHS ", "BXPCDSDT", 0x00000001)
Device (PWRB)
{
Name (_HID, "PNP0C0C" /* Power Button Device */) // _HID: Hardware ID
- Name (_ADR, Zero) // _ADR: Address
Name (_UID, Zero) // _UID: Unique ID
}
}
The differences between the two versions of DSDT.memhp are almost the
same as the above, except for total length and checksum.
DSDT.numamem binary is just the same with DSDT on virt machine, so we
don't show the differences again.
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20200204014325.16279-8-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Heyi Guo [Tue, 4 Feb 2020 01:43:24 +0000 (09:43 +0800)]
arm/acpi: simplify the description of PCI _CRS
The original code defines a named object for the resource template but
then returns the resource template object itself; the resulted output
is like below:
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
0x0000, // Granularity
0x0000, // Range Minimum
0x00FF, // Range Maximum
0x0000, // Translation Offset
0x0100, // Length
,, )
......
})
Return (ResourceTemplate ()
{
WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
0x0000, // Granularity
0x0000, // Range Minimum
0x00FF, // Range Maximum
0x0000, // Translation Offset
0x0100, // Length
,, )
......
})
}
So the named object "RBUF" is actually useless. The more natural way
is to return RBUF instead, or simply drop RBUF definition.
Choose the latter one to simplify the code.
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20200204014325.16279-7-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Heyi Guo [Tue, 4 Feb 2020 01:43:23 +0000 (09:43 +0800)]
arm/acpi: fix duplicated _UID of PCI interrupt link devices
Using _UID of 0 for all PCI interrupt link devices absolutely violates
the spec. Simply increase one by one.
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20200204014325.16279-6-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Heyi Guo [Tue, 4 Feb 2020 01:43:22 +0000 (09:43 +0800)]
arm/acpi: fix PCI _PRT definition
The address field in each _PRT mapping package should be constructed
with high word for device# and low word for function#, so it is wrong
to use bus_no as the high word. The existing code adds a bunch useless
entries with device #s above 31. Enumerate all possible slots
(i.e. PCI_SLOT_MAX) instead.
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20200204014325.16279-5-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Heyi Guo [Tue, 4 Feb 2020 01:43:21 +0000 (09:43 +0800)]
arm/virt/acpi: remove _ADR from devices identified by _HID
According to ACPI spec, _ADR should be used for device on a bus that
has a standard enumeration algorithm, but not for device which is on
system bus and must be enumerated by OSPM. And it is not recommended
to contain both _HID and _ADR in a single device.
See ACPI 6.3, section 6.1, top of page 343:
A device object must contain either an _HID object or an _ADR object,
but should not contain both.
(https://uefi.org/sites/default/files/resources/ACPI_6_3_May16.pdf)
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20200204014325.16279-4-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Heyi Guo [Tue, 4 Feb 2020 01:43:20 +0000 (09:43 +0800)]
arm/virt/acpi: remove meaningless sub device "RP0" from PCI0
The sub device "RP0" under PCI0 in ACPI/DSDT does not contain any
method or property other than "_ADR", so it is safe to remove it.
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Acked-by: "Michael S. Tsirkin" <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20200204014325.16279-3-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Heyi Guo [Tue, 4 Feb 2020 01:43:19 +0000 (09:43 +0800)]
bios-tables-test: prepare to change ARM virt ACPI DSDT
We are going to change ARM virt ACPI DSDT table, which will cause make
check to fail, so temporarily add related golden masters to ignore
list.
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20200204014325.16279-2-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Roman Kapl [Fri, 7 Feb 2020 09:55:29 +0000 (10:55 +0100)]
i.MX: Add support for WDT on i.MX6
Uses the i.MX2 rudimentary watchdog driver.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Message-id:
20200207095529.11309-1-rka@sysgo.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: removed accidental duplicate #include line]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Roman Kapl [Fri, 7 Feb 2020 09:54:09 +0000 (10:54 +0100)]
i.MX: Fix inverted register bits in wdt code.
Documentation says for WDA '0: Assert WDOG output.' and for SRS
'0: Assert system reset signal.'.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Message-id:
20200207095409.11227-1-rka@sysgo.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 13 Feb 2020 11:06:32 +0000 (11:06 +0000)]
Merge remote-tracking branch 'remotes/kraxel/tags/ui-
20200212-pull-request' into staging
gtk: refresh rate fix.
cocoa: drop pre-10.12 support.
ui: rework show-cursor option.
# gpg: Signature made Wed 12 Feb 2020 16:18:17 GMT
# gpg: using RSA key
4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/ui-
20200212-pull-request:
ui/cocoa: Drop workarounds for pre-10.12 OSX
ui: deprecate legacy -show-cursor option
ui: drop curor_hide global variable.
ui/gtk: implement show-cursor option
ui/cocoa: switch to new show-cursor option
ui/sdl: switch to new show-cursor option
ui: wire up legacy -show-cursor option
ui: add show-cursor option
ui/gtk: Fix gd_refresh_rate_millihz() when widget window is not realized
ui/gtk: Update gd_refresh_rate_millihz() to handle VirtualConsole
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Sat, 1 Feb 2020 17:05:34 +0000 (17:05 +0000)]
ui/cocoa: Drop workarounds for pre-10.12 OSX
Our official OSX support policy covers the last two released versions.
Currently that is 10.14 and 10.15. We also may work on older versions, but
don't guarantee it.
In commit
50290c002c045280f8d in mid-2019 we introduced some uses of
CLOCK_MONOTONIC which incidentally broke compilation for pre-10.12 OSX
versions (see LP:
1861551). We don't intend to fix that, so we might
as well drop the code in ui/cocoa.m which caters for pre-10.12
versions as well. (For reference, 10.11 fell out of Apple extended
security support in September 2018.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20200201170534.22123-1-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 31 Jan 2020 11:56:03 +0000 (12:56 +0100)]
ui: deprecate legacy -show-cursor option
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Gerd Hoffmann [Fri, 31 Jan 2020 11:36:10 +0000 (12:36 +0100)]
ui: drop curor_hide global variable.
No users left.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Gerd Hoffmann [Fri, 31 Jan 2020 10:54:48 +0000 (11:54 +0100)]
ui/gtk: implement show-cursor option
When specified just set null_cursor to NULL so we get the default
pointer instead of a blank pointer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Gerd Hoffmann [Thu, 6 Feb 2020 11:27:50 +0000 (12:27 +0100)]
ui/cocoa: switch to new show-cursor option
Use DisplayOpts settings to set the new file-global cursor_hide
variable, stop using the qemu-global cursor_hide variable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Gerd Hoffmann [Fri, 31 Jan 2020 11:35:21 +0000 (12:35 +0100)]
ui/sdl: switch to new show-cursor option
Use DisplayOpts settings instead of cursor_hide global variable.
Also make "-display sdl,show-cursor=on" work.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Gerd Hoffmann [Fri, 7 Feb 2020 09:46:13 +0000 (10:46 +0100)]
ui: wire up legacy -show-cursor option
Set new show-cursor display option when legacy -show-cursor
is specified on the command line.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Gerd Hoffmann [Fri, 31 Jan 2020 10:45:18 +0000 (11:45 +0100)]
ui: add show-cursor option
When enabled, this forces showing the mouse cursor,
i.e. do not hide the pointer on mouse grabs.
Defaults to off.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Philippe Mathieu-Daudé [Sat, 8 Feb 2020 16:10:48 +0000 (17:10 +0100)]
ui/gtk: Fix gd_refresh_rate_millihz() when widget window is not realized
gtk_widget_get_window() returns NULL if the widget's window is not
realized, and QEMU crashes. Example under gtk 3.22.30 (mate 1.20.1):
qemu-system-x86_64: Gdk: gdk_window_get_origin: assertion 'GDK_IS_WINDOW (window)' failed
(gdb) bt
#0 0x00007ffff496cf70 in gdk_window_get_origin () from /usr/lib64/libgdk-3.so.0
#1 0x00007ffff49582a0 in gdk_display_get_monitor_at_window () from /usr/lib64/libgdk-3.so.0
#2 0x0000555555bb73e2 in gd_refresh_rate_millihz (window=0x5555579d6280) at ui/gtk.c:1973
#3 gd_vc_gfx_init (view_menu=0x5555579f0590, group=0x0, idx=0, con=<optimized out>, vc=0x5555579d4a90, s=0x5555579d49f0) at ui/gtk.c:2048
#4 gd_create_menu_view (s=0x5555579d49f0) at ui/gtk.c:2149
#5 gd_create_menus (s=0x5555579d49f0) at ui/gtk.c:2188
#6 gtk_display_init (ds=<optimized out>, opts=0x55555661ed80 <dpy>) at ui/gtk.c:2256
#7 0x000055555583d5a0 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4358
Fixes:
c4c00922cc and
28b58f19d2 (display/gtk: get proper refreshrate)
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jan Kiszka <jan.kiszka@web.de>
Message-id:
20200208161048.11311-3-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Philippe Mathieu-Daudé [Sat, 8 Feb 2020 16:10:47 +0000 (17:10 +0100)]
ui/gtk: Update gd_refresh_rate_millihz() to handle VirtualConsole
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jan Kiszka <jan.kiszka@web.de>
Message-id:
20200208161048.11311-2-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Peter Maydell [Mon, 10 Feb 2020 18:09:14 +0000 (18:09 +0000)]
Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-virtiofs-
20200210' into staging
virtiofsd pull 2020-02-10
Coverity fixes and a reworked man page.
# gpg: Signature made Mon 10 Feb 2020 17:26:29 GMT
# gpg: using RSA key
45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert-gitlab/tags/pull-virtiofs-
20200210:
docs: add virtiofsd(1) man page
virtiofsd: do_read missing NULL check
virtiofsd: load_capng missing unlock
virtiofsd: fv_create_listen_socket error path socket leak
virtiofsd: Remove fuse_req_getgroups
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stefan Hajnoczi [Fri, 7 Feb 2020 16:29:51 +0000 (16:29 +0000)]
docs: add virtiofsd(1) man page
Document the virtiofsd(1) program and its command-line options. This
man page is a rST conversion of the original texi documentation that I
wrote.
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Mon, 3 Feb 2020 13:01:19 +0000 (13:01 +0000)]
virtiofsd: do_read missing NULL check
Missing a NULL check if the argument fetch fails.
Fixes: Coverity CID
1413119
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Dr. David Alan Gilbert [Mon, 3 Feb 2020 12:25:56 +0000 (12:25 +0000)]
virtiofsd: load_capng missing unlock
Missing unlock in error path.
Fixes: Covertiy CID
1413123
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Dr. David Alan Gilbert [Fri, 31 Jan 2020 19:52:14 +0000 (19:52 +0000)]
virtiofsd: fv_create_listen_socket error path socket leak
If we fail when bringing up the socket we can leak the listen_fd;
in practice the daemon will exit so it's not really a problem.
Fixes: Coverity CID
1413121
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Dr. David Alan Gilbert [Fri, 31 Jan 2020 19:02:49 +0000 (19:02 +0000)]
virtiofsd: Remove fuse_req_getgroups
Remove fuse_req_getgroups that's unused in virtiofsd; it came in
from libfuse but we don't actually use it. It was called from
fuse_getgroups which we previously removed (but had left it's header
in).
Coverity had complained about null termination in it, but removing
it is the easiest answer.
Fixes: Coverity CID:
1413117 (String not null terminated)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Maydell [Mon, 10 Feb 2020 17:08:51 +0000 (17:08 +0000)]
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
# gpg: Signature made Mon 10 Feb 2020 09:23:42 GMT
# gpg: using RSA key
8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
hw/core: Allow setting 'virtio-blk-device.scsi' property on OSX host
block: fix crash on zero-length unaligned write and read
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 10 Feb 2020 16:07:29 +0000 (16:07 +0000)]
Merge remote-tracking branch 'remotes/gkurz/tags/9p-next-2020-02-08' into staging
9p patches:
- some more protocol sanity checks
- qtest for readdir
- Christian Schoenebeck now official reviewer
# gpg: Signature made Sat 08 Feb 2020 08:38:10 GMT
# gpg: using RSA key
B4828BAF943140CEF2A3491071D4D5E5822F73D6
# gpg: Good signature from "Greg Kurz <groug@kaod.org>" [full]
# gpg: aka "Gregory Kurz <gregory.kurz@free.fr>" [full]
# gpg: aka "[jpeg image of size 3330]" [full]
# Primary key fingerprint: B482 8BAF 9431 40CE F2A3 4910 71D4 D5E5 822F 73D6
* remotes/gkurz/tags/9p-next-2020-02-08:
MAINTAINERS: 9pfs: Add myself as reviewer
tests/virtio-9p: added readdir test
hw/9pfs/9p-synth: added directory for readdir test
9pfs: validate count sent by client with T_readdir
9pfs: require msize >= 4096
tests/virtio-9p: add terminating null in v9fs_string_read()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 10 Feb 2020 12:07:26 +0000 (12:07 +0000)]
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/python-next-
20200207' into staging
- Python 3 cleanups:
. Remove text about Python 2 in qemu-deprecated (Thomas)
. Remove shebang header (Paolo, Philippe)
. scripts/checkpatch.pl now allows Python 3 interpreter (Philippe)
. Explicit usage of Python 3 interpreter in scripts (Philippe)
. Fix Python scripts permissions (Paolo, Philippe)
. Drop 'from __future__ import print_function' (Paolo)
. Specify minimum python requirements in ReadTheDocs configuration (Alex)
- Test UNIX/EXEC transports with migration (Oksana)
- Added extract_from_rpm helper, improved extract_from_deb (Liam)
- Allow to use other serial consoles than default one (Philippe)
- Various improvements in QEMUMonitorProtocol (Wainer)
- Fix kvm_available() on ppc64le (Wainer)
# gpg: Signature made Fri 07 Feb 2020 15:01:56 GMT
# gpg: using RSA key
FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/python-next-
20200207: (46 commits)
.readthedocs.yml: specify some minimum python requirements
drop "from __future__ import print_function"
make all Python scripts executable
scripts/signrom: remove Python 2 support, add shebang
tests/qemu-iotests/check: Only check for Python 3 interpreter
scripts: Explicit usage of Python 3 (scripts without __main__)
tests/qemu-iotests: Explicit usage of Python3 (scripts without __main__)
tests/vm: Remove shebang header
tests/acceptance: Remove shebang header
scripts/tracetool: Remove shebang header
scripts/minikconf: Explicit usage of Python 3
scripts: Explicit usage of Python 3 (scripts with __main__)
tests: Explicit usage of Python 3
tests/qemu-iotests: Explicit usage of Python 3 (scripts with __main__)
tests/qemu-iotests/check: Allow use of python3 interpreter
scripts/checkpatch.pl: Only allow Python 3 interpreter
tests/acceptance/migration: Default to -nodefaults
tests/acceptance/migration: Add the 'migration' tag
tests/acceptance/migration: Test EXEC transport when migrating
tests/acceptance/migration: Test UNIX transport when migrating
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Christian Schoenebeck [Sat, 8 Feb 2020 08:24:19 +0000 (09:24 +0100)]
MAINTAINERS: 9pfs: Add myself as reviewer
Currently 9pfs is only taken care of by Greg. Since I am actively working
on 9pfs and already became quite used to the code base, it makes sense to
volunteer as reviewer for 9pfs related patches.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Cc: Greg Kurz <groug@kaod.org>
Message-Id: <E1j04TG-0001xn-JY@lizzy.crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Christian Schoenebeck [Sat, 8 Feb 2020 08:24:19 +0000 (09:24 +0100)]
tests/virtio-9p: added readdir test
The first readdir test simply checks the amount of directory
entries returned by 9pfs server, according to the created amount
of virtual files on 9pfs synth driver side. Then the subsequent
readdir test also checks whether all directory entries have the
expected file names (as created on 9pfs synth driver side),
ignoring their precise order in result list though.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <
e0b4402722a877178f8fb6a8ad7b64bb20150613.
1579567020.git.qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Christian Schoenebeck [Sat, 8 Feb 2020 08:24:19 +0000 (09:24 +0100)]
hw/9pfs/9p-synth: added directory for readdir test
This will provide the following virtual files by the 9pfs
synth driver:
- /ReadDirDir/ReadDirFile99
- /ReadDirDir/ReadDirFile98
...
- /ReadDirDir/ReadDirFile1
- /ReadDirDir/ReadDirFile0
This virtual directory and its virtual 100 files will be
used by the upcoming 9pfs readdir tests.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <
5408c28c8de25dd575b745cef63bf785305ccef2.
1579567020.git.qemu_oss@crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Christian Schoenebeck [Sat, 8 Feb 2020 08:24:19 +0000 (09:24 +0100)]
9pfs: validate count sent by client with T_readdir
A good 9p client sends T_readdir with "count" parameter that's sufficiently
smaller than client's initially negotiated msize (maximum message size).
We perform a check for that though to avoid the server to be interrupted
with a "Failed to encode VirtFS reply type 41" transport error message by
bad clients. This count value constraint uses msize - 11, because 11 is the
header size of R_readdir.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <
3990d3891e8ae2074709b56449e96ab4b4b93b7d.
1579567020.git.qemu_oss@crudebyte.com>
[groug: added comment ]
Signed-off-by: Greg Kurz <groug@kaod.org>
Christian Schoenebeck [Sat, 8 Feb 2020 08:24:19 +0000 (09:24 +0100)]
9pfs: require msize >= 4096
A client establishes a session by sending a Tversion request along with a
'msize' parameter which client uses to suggest server a maximum message
size ever to be used for communication (for both requests and replies)
between client and server during that session. If client suggests a 'msize'
smaller than 4096 then deny session by server immediately with an error
response (Rlerror for "9P2000.L" clients or Rerror for "9P2000.u" clients)
instead of replying with Rversion.
So far any msize submitted by client with Tversion was simply accepted by
server without any check. Introduction of some minimum msize makes sense,
because e.g. a msize < 7 would not allow any subsequent 9p operation at
all, because 7 is the size of the header section common by all 9p message
types.
A substantial higher value of 4096 was chosen though to prevent potential
issues with some message types. E.g. Rreadlink may yield up to a size of
PATH_MAX which is usually 4096, and like almost all 9p message types,
Rreadlink is not allowed to be truncated by the 9p protocol. This chosen
size also prevents a similar issue with Rreaddir responses (provided client
always sends adequate 'count' parameter with Treaddir), because even though
directory entries retrieval may be split up over several T/Rreaddir
messages; a Rreaddir response must not truncate individual directory entries
though. So msize should be large enough to return at least one directory
entry with the longest possible file name supported by host. Most file
systems support a max. file name length of 255. Largest known file name
lenght limit would be currently ReiserFS with max. 4032 bytes, which is
also covered by this min. msize value because 4032 + 35 < 4096.
Furthermore 4096 is already the minimum msize of the Linux kernel's 9pfs
client.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <
8ceecb7fb9fdbeabbe55c04339349a36929fb8e3.
1579567019.git.qemu_oss@crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Christian Schoenebeck [Sat, 8 Feb 2020 08:24:19 +0000 (09:24 +0100)]
tests/virtio-9p: add terminating null in v9fs_string_read()
The 9p protocol sends strings in general without null termination
over the wire. However for future use of this functions it is
beneficial for the delivered string to be null terminated though
for being able to use the string with standard C functions which
often rely on strings being null terminated.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <
52c84e2ce3bcafc2a38eed13b8c8e23bc1a8ecb9.
1579567019.git.qemu_oss@crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Peter Maydell [Fri, 7 Feb 2020 18:02:52 +0000 (18:02 +0000)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20200207' into staging
target-arm queue:
* monitor: fix query-cpu-model-expansion crash when using machine type none
* Support emulation of the ARMv8.1-VHE architecture feature
* bcm2835_dma: fix bugs in TD mode handling
* docs/arm-cpu-features: Make kvm-no-adjvtime comment clearer
* stellaris, stm32f2xx_timer, armv7m_systick: fix minor memory leaks
# gpg: Signature made Fri 07 Feb 2020 14:32:28 GMT
# gpg: using RSA key
E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-
20200207: (48 commits)
stellaris: delay timer_new to avoid memleaks
stm32f2xx_timer: delay timer_new to avoid memleaks
armv7m_systick: delay timer_new to avoid memleaks
docs/arm-cpu-features: Make kvm-no-adjvtime comment clearer
bcm2835_dma: Re-initialize xlen in TD mode
bcm2835_dma: Fix the ylen loop in TD mode
target/arm: Raise only one interrupt in arm_cpu_exec_interrupt
target/arm: Use bool for unmasked in arm_excp_unmasked
target/arm: Pass more cpu state to arm_excp_unmasked
target/arm: Move arm_excp_unmasked to cpu.c
target/arm: Enable ARMv8.1-VHE in -cpu max
target/arm: Update arm_cpu_do_interrupt_aarch64 for VHE
target/arm: Update get_a64_user_mem_index for VHE
target/arm: check TGE and E2H flags for EL0 pauth traps
target/arm: Update {fp,sve}_exception_el for VHE
target/arm: Update arm_phys_excp_target_el for TGE
target/arm: Flush tlbs for E2&0 translation regime
target/arm: Flush tlb for ASID changes in EL2&0 translation regime
target/arm: Add VHE timer register redirection and aliasing
target/arm: Add VHE system register redirection and aliasing
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Fri, 7 Feb 2020 00:14:04 +0000 (01:14 +0100)]
hw/core: Allow setting 'virtio-blk-device.scsi' property on OSX host
Commit
ed65fd1a2750 ("virtio-blk: switch off scsi-passthrough by
default") changed the default value of the 'scsi' property of
virtio-blk, which is only available on Linux hosts. It also added
an unconditional compat entry for 2.4 or earlier machines.
Trying to set this property on a pre-2.5 machine on OSX, we get:
Unexpected error in object_property_find() at qom/object.c:1201:
qemu-system-x86_64: -device virtio-blk-pci,id=scsi0,drive=drive0: can't apply global virtio-blk-device.scsi=true: Property '.scsi' not found
Fix this error by marking the property optional.
Fixes:
ed65fd1a27 ("virtio-blk: switch off scsi-passthrough by default")
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20200207001404.1739-1-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 6 Feb 2020 16:42:45 +0000 (19:42 +0300)]
block: fix crash on zero-length unaligned write and read
Commit
7a3f542fbd "block/io: refactor padding" occasionally dropped
aligning for zero-length request: bdrv_init_padding() blindly return
false if bytes == 0, like there is nothing to align.
This leads the following command to crash:
./qemu-io --image-opts -c 'write 1 0' \
driver=blkdebug,align=512,image.driver=null-co,image.size=512
>> qemu-io: block/io.c:1955: bdrv_aligned_pwritev: Assertion
`(offset & (align - 1)) == 0' failed.
>> Aborted (core dumped)
Prior to
7a3f542fbd we does aligning of such zero requests. Instead of
recovering this behavior let's just do nothing on such requests as it
is useless.
Note that driver may have special meaning of zero-length reqeusts, like
qcow2_co_pwritev_compressed_part, so we can't skip any zero-length
operation. But for unaligned ones, we can't pass it to driver anyway.
This commit also fixes crash in iotest 80 running with -nocache:
./check -nocache -qcow2 80
which crashes on same assertion due to trying to read empty extra data
in qcow2_do_read_snapshots().
Cc: qemu-stable@nongnu.org # v4.2
Fixes:
7a3f542fbd
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id:
20200206164245.17781-1-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Maydell [Fri, 7 Feb 2020 15:01:23 +0000 (15:01 +0000)]
Merge remote-tracking branch 'remotes/berrange/tags/misc-fixes-pull-request' into staging
Misc fixes
* Use correct constants for 'bool' type
* Fix compatibility with noVNC in websocket impl
* Remove inaccurate docs aout default NIC model
# gpg: Signature made Fri 07 Feb 2020 12:23:53 GMT
# gpg: using RSA key
DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/misc-fixes-pull-request:
docs: stop documenting the e1000 NIC model as the default
authz: fix usage of bool in listfile.c
io/channel-websock: treat 'binary' and no sub-protocol as the same
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alex Bennée [Thu, 6 Feb 2020 16:31:20 +0000 (16:31 +0000)]
.readthedocs.yml: specify some minimum python requirements
QEMU is all about the Python 3 now so lets also hint that to
ReadTheDocs in its config file.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20200206163120.31899-1-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Paolo Bonzini [Tue, 4 Feb 2020 16:06:04 +0000 (17:06 +0100)]
drop "from __future__ import print_function"
This is only needed for Python 2, which we do not support anymore.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20200204160604.19883-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Paolo Bonzini [Tue, 4 Feb 2020 16:02:37 +0000 (17:02 +0100)]
make all Python scripts executable
Scripts that have a Python shebang are meant to be executed directly from the
shell; give them 755 permissions.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20200204160237.16889-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Paolo Bonzini [Tue, 4 Feb 2020 16:00:28 +0000 (17:00 +0100)]
scripts/signrom: remove Python 2 support, add shebang
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20200204160028.16211-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Thu, 30 Jan 2020 16:32:32 +0000 (17:32 +0100)]
tests/qemu-iotests/check: Only check for Python 3 interpreter
All the iotests Python scripts have been converted to search for
the Python 3 interpreter. Update the ./check script accordingly.
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200130163232.10446-13-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Thu, 30 Jan 2020 16:32:31 +0000 (17:32 +0100)]
scripts: Explicit usage of Python 3 (scripts without __main__)
Use the program search path to find the Python 3 interpreter.
Patch created mechanically by running:
$ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \
$(git grep -lF '#!/usr/bin/env python' \
| xargs grep -L 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200130163232.10446-12-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Thu, 30 Jan 2020 16:32:30 +0000 (17:32 +0100)]
tests/qemu-iotests: Explicit usage of Python3 (scripts without __main__)
Use the program search path to find the Python 3 interpreter.
Patch created mechanically by running:
$ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \
$(git grep -lF '#!/usr/bin/env python' \
| xargs grep -L 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200130163232.10446-11-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Thu, 30 Jan 2020 16:32:29 +0000 (17:32 +0100)]
tests/vm: Remove shebang header
Patch created mechanically by running:
$ chmod 644 $(git grep -lF '#!/usr/bin/env python' \
| xargs grep -L 'if __name__.*__main__')
$ sed -i "/^#\!\/usr\/bin\/\(env\ \)\?python.\?$/d" \
$(git grep -lF '#!/usr/bin/env python' \
| xargs grep -L 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200130163232.10446-10-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Thu, 30 Jan 2020 16:32:27 +0000 (17:32 +0100)]
tests/acceptance: Remove shebang header
Patch created mechanically by running:
$ chmod 644 $(git grep -lF '#!/usr/bin/env python' \
| xargs grep -L 'if __name__.*__main__')
$ sed -i "/^#\!\/usr\/bin\/\(env\ \)\?python.\?$/d" \
$(git grep -lF '#!/usr/bin/env python' \
| xargs grep -L 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200130163232.10446-8-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Thu, 30 Jan 2020 16:32:28 +0000 (17:32 +0100)]
scripts/tracetool: Remove shebang header
Patch created mechanically by running:
$ chmod 644 $(git grep -lF '#!/usr/bin/env python' \
| xargs grep -L 'if __name__.*__main__')
$ sed -i "/^#\!\/usr\/bin\/\(env\ \)\?python.\?$/d" \
$(git grep -lF '#!/usr/bin/env python' \
| xargs grep -L 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200130163232.10446-9-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Thu, 30 Jan 2020 16:32:26 +0000 (17:32 +0100)]
scripts/minikconf: Explicit usage of Python 3
Use the program search path to find the Python 3 interpreter.
Patch created manually after running:
$ git grep -l 'if __name__.*__main__' \
| xargs grep -LF '#!/usr/bin/env python3'
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200130163232.10446-7-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Thu, 30 Jan 2020 16:32:25 +0000 (17:32 +0100)]
scripts: Explicit usage of Python 3 (scripts with __main__)
Use the program search path to find the Python 3 interpreter.
Patch created mechanically by running:
$ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \
$(git grep -l 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200130163232.10446-6-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Thu, 30 Jan 2020 16:32:24 +0000 (17:32 +0100)]
tests: Explicit usage of Python 3
Use the program search path to find the Python 3 interpreter.
Patch created mechanically by running:
$ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \
$(git grep -l 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200130163232.10446-5-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Thu, 30 Jan 2020 16:32:23 +0000 (17:32 +0100)]
tests/qemu-iotests: Explicit usage of Python 3 (scripts with __main__)
Use the program search path to find the Python 3 interpreter.
Patch created mechanically by running:
$ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \
$(git grep -l 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200130163232.10446-4-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Thu, 30 Jan 2020 16:32:22 +0000 (17:32 +0100)]
tests/qemu-iotests/check: Allow use of python3 interpreter
As we want to enforce a unique and explicit Python 3 interpreter,
we need let this script handle 'python3' too.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200130163232.10446-3-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Thu, 30 Jan 2020 16:32:21 +0000 (17:32 +0100)]
scripts/checkpatch.pl: Only allow Python 3 interpreter
Since commit
ddf9069963 QEMU requires Python >= 3.5.
PEP 0394 [*] states that 'python3' should be available and
that 'python' is optional.
To avoid problem with unsupported versions, enforce the
shebang interpreter to Python 3.
[*] https://www.python.org/dev/peps/pep-0394/
Reported-by: John Snow <jsnow@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200130163232.10446-2-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Wed, 29 Jan 2020 21:23:43 +0000 (22:23 +0100)]
tests/acceptance/migration: Default to -nodefaults
We don't need the default options to run this test.
This fixes errors when running a binary built with
--without-default-devices such:
ERROR: qemu-system-arm: Unsupported NIC model: virtio-net-pci
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <
20200129212345.20547-28-philmd@redhat.com>
[PMD: Rebased]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Tue, 4 Feb 2020 16:33:04 +0000 (17:33 +0100)]
tests/acceptance/migration: Add the 'migration' tag
By using an Avocado tag, we can run all tests described by that
tag as once:
$ avocado --show=app run -t migration tests/acceptance/
JOB ID :
165477737509503fcfa6d7108057a0a18f2a6559
JOB LOG : avocado/job-results/job-2020-02-04T17.29-
1654777/job.log
(1/3) tests/acceptance/migration.py:Migration.test_migration_with_tcp_localhost: PASS (0.38 s)
(2/3) tests/acceptance/migration.py:Migration.test_migration_with_unix: PASS (0.33 s)
(3/3) tests/acceptance/migration.py:Migration.test_migration_with_exec: PASS (0.07 s)
RESULTS : PASS 3 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <
20200204163304.14616-1-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Oksana Vohchana [Mon, 3 Feb 2020 11:16:31 +0000 (13:16 +0200)]
tests/acceptance/migration: Test EXEC transport when migrating
Along with VM migration via TCP, we can use migration through
the EXEC transport protocol
Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20200203111631.18796-3-ovoshcha@redhat.com>
[PMD: Split patch in 2, reworded subject and description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Oksana Vohchana [Mon, 3 Feb 2020 11:16:31 +0000 (13:16 +0200)]
tests/acceptance/migration: Test UNIX transport when migrating
Along with VM migration via TCP, we can use migration through
the UNIX transport protocol
Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20200203111631.18796-3-ovoshcha@redhat.com>
[PMD: Split patch in 2, reworded subject and description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Oksana Vohchana [Mon, 3 Feb 2020 11:16:30 +0000 (13:16 +0200)]
tests/acceptance/migration: Factor out do_migrate()
We are going to reuse this code when testing different transport
methods, so factor it out first.
Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20200203111631.18796-2-ovoshcha@redhat.com>
[PMD: Split patch in 2, reworded subject and description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Oksana Vohchana [Mon, 3 Feb 2020 11:16:30 +0000 (13:16 +0200)]
tests/acceptance/migration: Factor out assert_migration()
We are going to reuse this code when testing different transport
methods, so factor it out first
Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20200203111631.18796-2-ovoshcha@redhat.com>
[PMD: Split patch in 2, reworded subject and description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Wed, 29 Jan 2020 21:23:44 +0000 (22:23 +0100)]
tests/acceptance/version: Default to -nodefaults
We don't need the default options to run this test.
This fixes errors when running a binary built with
--without-default-devices such:
ERROR: qemu-system-arm: Unsupported NIC model: virtio-net-pci
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <
20200129212345.20547-29-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Wed, 29 Jan 2020 21:23:42 +0000 (22:23 +0100)]
tests/acceptance/boot_linux_console: Do not use VGA on Clipper machine
As we only read the serial console, we don't need to force a
VGA display. This fixes when running a binary built with
--without-default-devices:
ERROR: qemu-system-alpha: standard VGA not available
We also need the '-nodefaults' argument to avoid:
ERROR: qemu-system-alpha: Unsupported NIC model: e1000
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20200129212345.20547-27-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Thu, 6 Feb 2020 17:17:15 +0000 (18:17 +0100)]
tests/acceptance/virtio_check_params: Disable the test
This test fails on various CI:
- Using QEMU 4.0:
tests/acceptance/x86_cpu_model_versions.py:X86CPUModelAliases.test_none_alias: ERROR: 'alias-of' (0.45 s)
- On OSX
Unexpected error in object_property_find() at qom/object.c:1201:
qemu-system-x86_64: -device virtio-blk-pci,id=scsi0,drive=drive0: can't apply global virtio-blk-device.scsi=true: Property '.scsi' not found
- When removing unavailable machine:
VirtioMaxSegSettingsCheck.test_machine_types: ERROR: list.remove(x): x not in list (0.12 s)
- Using Xen:
xencall: error: Could not obtain handle on privileged command interface: No such file or directory
xen be core: xen be core: can't open xen interface
- On PPC:
TestFail: machine type pseries-2.8: No Transactional Memory support in TCG, try appending -machine cap-htm=off
- On S390X configured with --without-default-devices:
ERROR: qemu-system-s390x: -device virtio-scsi-pci,id=scsi0: 'virtio-scsi-pci' is not a valid device model name
Disable it for now.
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <
20200206171715.25041-1-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Wed, 29 Jan 2020 21:23:40 +0000 (22:23 +0100)]
tests/acceptance/virtio_check_params: Default to -nodefaults
We don't need the default options to run this test.
This fixes errors when running a binary built with
--without-default-devices such:
ERROR: qemu-system-s390x: Unknown device 'virtio-net-ccw' for bus 'virtual-css-bus'
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20200129212345.20547-25-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Wed, 29 Jan 2020 21:23:34 +0000 (22:23 +0100)]
tests/acceptance/virtio_check_params: List machine being tested
Add logging for easier debugging of failures:
$ avocado --show=machine run tests/acceptance/virtio_check_params.py
(1/1) tests/acceptance/virtio_check_params.py:VirtioMaxSegSettingsCheck.test_machine_types:
machine: {'name': 'pc-i440fx-2.12', 'seg_max_adjust': 'false', 'device': 'virtio-scsi-pci'}
machine: {'name': 'pc-i440fx-2.0', 'seg_max_adjust': 'false', 'device': 'virtio-scsi-pci'}
machine: {'name': 'pc-q35-4.2', 'seg_max_adjust': 'false', 'device': 'virtio-scsi-pci'}
machine: {'name': 'pc-i440fx-2.5', 'seg_max_adjust': 'false', 'device': 'virtio-scsi-pci'}
machine: {'name': 'pc-i440fx-4.2', 'seg_max_adjust': 'false', 'device': 'virtio-scsi-pci'}
...
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <
20200129212345.20547-19-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Wed, 29 Jan 2020 21:23:33 +0000 (22:23 +0100)]
tests/acceptance/virtio_check_params: Improve exception logging
Message-Id: <
20200129212345.20547-18-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Denis Plotnikov [Wed, 29 Jan 2020 21:23:31 +0000 (22:23 +0100)]
tests: rename virtio_seg_max_adjust to virtio_check_params
Since, virtio_seg_max_adjust checks not only seg_max, but also
virtqueue_size parameter, let's make the test more general and
add new parameters to be checked there in the future.
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-Id: <
20200129140702.5411-5-dplotnikov@virtuozzo.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Thomas Huth [Fri, 24 Jan 2020 17:03:25 +0000 (18:03 +0100)]
tests/acceptance: Add boot tests for some of the QEMU advent calendar images
The 2018 edition of the QEMU advent calendar 2018 featured Linux images
for various non-x86 machines. We can use them for a boot tests in our
acceptance test suite.
Let's also make sure that we build the corresponding machines in Travis.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <
20200124170325.30072-1-thuth@redhat.com>
[PMD: Rebased, --python=python3 parameter dropped in commit
5311cb12e]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Mon, 20 Jan 2020 23:51:59 +0000 (00:51 +0100)]
tests/boot_linux_console: Tag Emcraft Smartfusion2 as running 'u-boot'
Avocado tags are handy to automatically select tests matching
the tags. Since this test also runs U-Boot, tag it.
We can run all the tests using U-Boot as once with:
$ avocado --show=app run -t u-boot tests/acceptance/
JOB LOG : avocado/job-results/job-2020-01-21T00.16-
ee9344e/job.log
(1/3) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_emcraft_sf2: PASS (16.59 s)
(2/3) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_raspi2_uboot: PASS (0.47 s)
(3/3) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_aarch64_raspi3_uboot: PASS (2.43 s)
RESULTS : PASS 3 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 19.78 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <
20200120235159.18510-8-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Liam Merwick [Mon, 27 Jan 2020 16:36:31 +0000 (16:36 +0000)]
tests/boot_linux_console: fix extract_from_deb() comment
The second param in extract_from_deb() is 'path' not 'file'
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
1580142994-1836-4-git-send-email-liam.merwick@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Liam Merwick [Wed, 5 Feb 2020 14:56:05 +0000 (14:56 +0000)]
tests/boot_linux_console: use os.path for filesystem paths
Change extract_from_deb() to use os.path routines to manipulate the
filesystem path returned when extracting a file.
Suggested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
1580914565-19675-7-git-send-email-liam.merwick@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Liam Merwick [Wed, 5 Feb 2020 14:56:03 +0000 (14:56 +0000)]
tests/boot_linux_console: add extract_from_rpm method
Add a method to extract a specified file from an RPM to the test's
working directory and return the path to the extracted file.
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
1580914565-19675-5-git-send-email-liam.merwick@oracle.com>
[PMD: Rebased]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Liam Merwick [Wed, 5 Feb 2020 14:56:02 +0000 (14:56 +0000)]
travis.yml: install rpm2cpio for acceptance tests
The extract_from_rpm() method added for the PVH acceptance tests needs
rpm2cpio to extract a vmlinux binary from an RPM.
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
1580914565-19675-4-git-send-email-liam.merwick@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Mon, 20 Jan 2020 23:51:55 +0000 (00:51 +0100)]
Acceptance tests: Add interrupt_interactive_console_until_pattern()
We need a function to interrupt interactive consoles.
Example: Interrupt U-Boot to set different environment values.
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <
20200120235159.18510-4-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Mon, 20 Jan 2020 23:51:54 +0000 (00:51 +0100)]
Acceptance tests: Extract _console_interaction()
Since we are going to re-use the code shared between
wait_for_console_pattern() and exec_command_and_wait_for_pattern(),
extract the common part into a local function.
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <
20200120235159.18510-3-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Mon, 20 Jan 2020 23:51:56 +0000 (00:51 +0100)]
python/qemu/machine: Allow to use other serial consoles than default
Currently the QEMU Python module limits the QEMUMachine class to
use the first serial console.
Some machines/guest might use another console than the first one as
the 'boot console'. For example the Raspberry Pi uses the second
(AUX) console.
To be able to use the Nth console as default, we simply need to
connect all the N - 1 consoles to the null chardev.
Add an index argument, so we can use a specific serial console as
default.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <
20200120235159.18510-5-f4bug@amsat.org>
[PMD: zero-initialize _console_index in __init__()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Lukáš Doktor [Mon, 20 Jan 2020 07:12:02 +0000 (08:12 +0100)]
python: Treat None-return of greeting cmd
In case qemu process dies the "monitor.cmd" returns None which gets
passed to the "__negotiate_capabilities" and leads to unhandled
exception. Let's only check the resp in case it has a value.
Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <
20200120071202.30646-1-ldoktor@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Thomas Huth [Thu, 9 Jan 2020 09:51:16 +0000 (10:51 +0100)]
qemu-deprecated: Remove text about Python 2
Python 2 support has been removed, so we should now also remove
the announcement text for the deprecation.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <
20200109095116.18201-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Wainer dos Santos Moschetta [Wed, 5 Feb 2020 20:32:46 +0000 (15:32 -0500)]
python/qemu: accel: Fix kvm_available() on ppc64le
On ppc64le, the accel.kvm_available() check may wrongly
return False because the host arch (as returned by os.uname[4])
and the target arch (ppc64) mismatch. In order to solve this
it is added an ppc64le -> ppc64 mapping which is used as an
fallback verification.
Fixes:
53a049d7d78e5ccf6d4c0d7
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20200205203250.30526-5-wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Wainer dos Santos Moschetta [Fri, 27 Dec 2019 13:41:01 +0000 (10:41 -0300)]
python/qemu: qmp: Remove unnused attributes
The `error` and `timeout` attributes in QEMUMonitorProtocol are
not used, so this delete them.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20191227134101.244496-6-wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Wainer dos Santos Moschetta [Tue, 4 Feb 2020 14:11:10 +0000 (11:11 -0300)]
python/qemu: qmp: Make QEMUMonitorProtocol a context manager
This implement the __enter__ and __exit__ functions on
QEMUMonitorProtocol class so that it can be used on 'with'
statement and the resources will be free up on block end:
with QEMUMonitorProtocol(socket_path) as qmp:
qmp.connect()
qmp.command('query-status')
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <
20200204141111.3207-5-wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Wainer dos Santos Moschetta [Tue, 4 Feb 2020 14:11:09 +0000 (11:11 -0300)]
python/qemu: qmp: Make accept()'s timeout configurable
Currently the timeout of QEMUMonitorProtocol.accept() is
hard-coded to 15.0 seconds. This added the parameter `timeout`
so the value can be configured by the user.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <
20200204141111.3207-4-wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>