OSDN Git Service
Alex Deucher [Wed, 14 Aug 2013 23:55:46 +0000 (19:55 -0400)]
drm/radeon: handle cg in KB/KV dpm code
Clockgating needs to be disabled around certain parts
of dpm setup otherwise the smc gets into a bad state
and dpm doesn't work properly.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 14 Aug 2013 17:55:53 +0000 (13:55 -0400)]
drm/radeon: handle cg in CI dpm code
Clockgating needs to be disabled around certain parts
of dpm setup otherwise the smc gets into a bad state
and dpm doesn't work properly.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 22 Aug 2013 15:57:46 +0000 (11:57 -0400)]
drm/radeon/cik: properly set up the clearstate buffer for pg (v2)
The format of the clearstate buffer used for pg (powergating)
changed between NI and SI. This formats it properly for what
the hardware expects on SI+.
v2: fix addresses
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 12 Aug 2013 21:25:26 +0000 (17:25 -0400)]
drm/radeon: fixes for gfx clockgating on CIK
Clockgating requires signalling between the CP and the
RLC to work properly. Resetting the CP block in the
CP resume code messed up the internal coordination
between the blocks. Removing the reset allows gfx
clockgating to work properly. However, when gfx clock
gating is enabled, there is a strange interaction with
dpm which causes the chip to stay in the high performance
level all the time, so leave gfx clockgating disabled
for now.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 9 Aug 2013 15:18:39 +0000 (11:18 -0400)]
drm/radeon: restructure cg/pg on cik (v2)
- use new cg/pg flags for finer grained clock and
powergating control
- restructure the cg/pg code so it can be called from
other components such as dpm
v2: fix build breakage from rebase
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 13 Aug 2013 17:18:37 +0000 (13:18 -0400)]
drm/radeon/si: enable DMA pg by default
Enable DMA powergating by default. The DMA engines
will be powergated when not in use.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 13 Aug 2013 16:48:06 +0000 (12:48 -0400)]
drm/radeon/si: properly set up the clearstate buffer for pg (v2)
The format of the clearstate buffer used for pg (powergating)
changed between NI and SI. This formats it properly for what
the hardware expects on SI.
v2: fix addresses
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 14 Aug 2013 22:53:56 +0000 (18:53 -0400)]
drm/radeon: enable mgcg on SI
Now that the CP is no longer reset and cg is properly
disabled in when appropriate in the dpm code we can
now enable mgcg (medium grained clockgating).
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 14 Aug 2013 21:24:08 +0000 (17:24 -0400)]
drm/radeon: handle cg in SI dpm code
Clockgating needs to be disabled around certain parts
of dpm setup otherwise the smc gets into a bad state
and dpm doesn't work properly.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 15 Aug 2013 20:20:26 +0000 (16:20 -0400)]
drm/radeon: fixes for gfx clockgating on SI
Clockgating requires signalling between the CP and the
RLC to work properly. Resetting the CP block in the
CP resume code messed up the internal coordination
between the blocks. Removing the reset allows gfx
clockgating to work properly. However, when gfx clock
gating is enabled, there is a strange interaction with
dpm which causes the chip to stay in the high performance
level all the time, so leave gfx clockgating disabled
for now.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 8 Aug 2013 23:34:07 +0000 (19:34 -0400)]
drm/radeon/si: restructure cg code (v3)
Resturcture clockgating code so that it can be
enabled/disabled from other components such as
dpm.
v2: make function static
v3: add fine grained cg controls
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 8 Aug 2013 22:00:10 +0000 (18:00 -0400)]
drm/radeon: use new cg/pg flags for SI
Allows us finer grained control over clock and
powergating on SI.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 8 Aug 2013 20:31:25 +0000 (16:31 -0400)]
drm/radeon: add cg and pg flags
This commits adds flags for supported clockgating and
powergating features. This allows us to more easily
track which features are supported on a particular
asic and to enable/disable features for debugging.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 15 Aug 2013 16:03:37 +0000 (12:03 -0400)]
drm/radeon: set speaker allocation for DCE3.2
This updates the audio driver to the speaker allocation
block from the EDID. A similar change was just implemented
for DCE4-8.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 15 Aug 2013 13:34:07 +0000 (09:34 -0400)]
drm/radeon: set speaker allocation for DCE4/5 (v2)
This updates the audio driver to the speaker allocation
block from the EDID. A similar change was just implemented
for DCE6/8.
v2: remove unused variables
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Thu, 15 Aug 2013 09:16:30 +0000 (11:16 +0200)]
drm/radeon: set speakers allocation earlier
Do it before enabling audio channels (in AFMT_AUDIO_PACKET_CONTROL2
register).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 31 Jul 2013 20:51:33 +0000 (16:51 -0400)]
drm/radeon: add audio support for DCE6/8 GPUs (v12)
Similar to DCE4/5, but supports multiple audio pins
which can be assigned per afmt block.
v2: rework the driver to handle more than one audio
pin.
v3: try different dto reg
v4: properly program dto
v5 (ck): change dto programming order
v6: program speaker allocation block
v7: rebase
v8: rebase on Rafał's changes
v9: integrated Rafał's comments, update to latest
drm_edid_to_speaker_allocation API
v10: add missing line break in error message
v11: add back audio enabled messages
v12: fix copy paste typo in r600_audio_enable
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Thu, 1 Aug 2013 15:29:16 +0000 (17:29 +0200)]
drm/radeon: use loop for initializing AFMT blocks
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 25 Jul 2013 19:55:32 +0000 (15:55 -0400)]
drm/edid: add a helper function to extract the speaker allocation data block (v3)
This adds a helper function to extract the speaker allocation
data block from the EDID. This data block describes what speakers
are present on the display device.
v2: update per Ville Syrjälä's comments
v3: fix copy/paste typo in memory allocation
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>
Christian König [Tue, 13 Aug 2013 09:56:54 +0000 (11:56 +0200)]
drm/radeon: separate DMA code
Similar to separating the UVD code, just put the DMA
functions into separate files.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 13 Aug 2013 09:56:53 +0000 (11:56 +0200)]
drm/radeon: separate UVD code v3
Our different hardware blocks are actually completely
separated, so it doesn't make much sense any more to
structure the code by pure chipset generations.
Start restructuring the code by separating our the UVD block.
v2: updated commit message
v3: rebased and restructurized start/stop functions for kv dpm.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 13 Aug 2013 09:56:52 +0000 (11:56 +0200)]
drm/radeon: remove special handling for the DMA ring
Now that we have callbacks for [rw]ptr handling we can
remove the special handling for the DMA rings and use
the callbacks instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 13 Aug 2013 09:56:51 +0000 (11:56 +0200)]
drm/radeon: rework UVD writeback & [rw]ptr handling
The hardware just doesn't support this correctly.
Disable it before we accidentally write anywhere we shouldn't.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 13 Aug 2013 09:56:50 +0000 (11:56 +0200)]
drm/radeon: rework ring function handling
Give the ring functions a separate structure and let the asic
structure point to the ring specific functions. This simplifies
the code and allows us to make changes at only one point.
No change in functionality.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 7 Aug 2013 23:34:53 +0000 (19:34 -0400)]
drm/radeon: fix endian bugs in hw i2c atom routines
Need to swap the data fetched over i2c properly. This
is the same fix as the endian fix for aux channel
transactions.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Mon, 12 Aug 2013 15:35:02 +0000 (11:35 -0400)]
drm/radeon/dpm: adjust the vblank time checks for eg, ni, si
According to the internal teams, we never hit the limit for
mclk switching on these asics, so we can disable the check.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 12 Aug 2013 15:24:05 +0000 (11:24 -0400)]
drm/radeon/dpm: add reclocking quirk for ASUS K70AF
The LCD has a relatively short vblank time (216us), but
the card is able to reclock memory fine in that time.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: normalrawr@gmail.com
Alex Deucher [Fri, 9 Aug 2013 14:05:24 +0000 (10:05 -0400)]
drm/radeon/dpm: implement UVD powergating for CI
Disable the UVD block when not in use to save power.
The block is not actually powergated on CI, but we
switch between UVD DPM (where the uvd clocks are
adjusted on demand) and clocks off.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 9 Aug 2013 14:02:40 +0000 (10:02 -0400)]
drm/radeon/dpm: implement UVD powergating for KB/KV
Powergate the UVD block when not in use to save power.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 6 Aug 2013 15:39:38 +0000 (11:39 -0400)]
drm/radeon: restructure UVD code to handle UVD PG (v2)
When we PG (powergate) UVD, we need to re-initialize it
before we can use it again.
v2: rebase on UVD stop fixes
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 31 Jul 2013 22:13:23 +0000 (18:13 -0400)]
drm/radeon/dpm: add new callback for powergating UVD (v4)
Starting on CIK, multi-media blocks like UVD no longer
have special power state. Rather they have their own
DPM implementation which adjusts their clocks dynamically
when active. When they are not active, the blocks are
powergated to save power.
v2: add missing pm locks
v3: rebase on uvd state selection rework
v4: fix inverted logic typo noticed by Christian
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 18 Jul 2013 20:48:46 +0000 (16:48 -0400)]
drm/radeon/dpm: implement force performance level for KB/KV
Allows you to force the selected performance level via sysfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 18 Jul 2013 20:39:53 +0000 (16:39 -0400)]
drm/radeon/dpm: add debugfs support for KB/KV
This allows you to look at the current DPM state via
debugfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 15 Jul 2013 22:24:31 +0000 (18:24 -0400)]
drm/radeon/dpm: implement vblank_too_short callback for CI
Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 15 Jul 2013 22:14:24 +0000 (18:14 -0400)]
drm/radeon/dpm: implement force performance level for CI
Allows you to force the selected performance level via sysfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 15 Jul 2013 21:34:33 +0000 (17:34 -0400)]
drm/radeon/dpm: add debugfs support for CI
This allows you to look at the current DPM state via debugfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 14 Aug 2013 05:03:41 +0000 (01:03 -0400)]
drm/radeon: add dpm support for CI dGPUs (v2)
This adds dpm support for btc asics. This includes:
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen switching
Set radeon.dpm=1 to enable.
v2: remove unused radeon_atombios.c changes,
make missing smc ucode non-fatal
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 14 Aug 2013 05:01:40 +0000 (01:01 -0400)]
drm/radeon/kms: add dpm support for KB/KV
This adds dpm support for KB/KV asics. This includes:
- dynamic engine clock scaling
- dynamic voltage scaling
- power containment
- shader power scaling
Set radeon.dpm=1 to enable.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 19 Jul 2013 16:42:08 +0000 (12:42 -0400)]
drm/radeon/dpm: add helper to fetch the vrefresh of the current mode
Needed for DPM on CI.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 15 May 2013 21:25:03 +0000 (17:25 -0400)]
drm/radeon/dpm: add a helper to encode pcie lane setting
convert from number of lanes to register setting.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 15 May 2013 19:53:57 +0000 (15:53 -0400)]
drm/radeon/dpm: add vce clocks to radeon_ps
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 14 May 2013 21:44:31 +0000 (17:44 -0400)]
drm/radeon: add r600_get_pcie_lane_support helper
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 9 May 2013 21:34:45 +0000 (17:34 -0400)]
drm/radeon: parse the acp clock voltage deps table
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 9 May 2013 21:27:49 +0000 (17:27 -0400)]
drm/radeon: parse the samu clock voltage deps table
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 9 May 2013 21:21:56 +0000 (17:21 -0400)]
drm/radeon/dpm: clean up the extended table error pathes
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 9 May 2013 21:14:11 +0000 (17:14 -0400)]
drm/radeon: parse the uvd clock voltage deps table
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 9 May 2013 21:04:27 +0000 (17:04 -0400)]
drm/radeon: parse the vce clock voltage deps table
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 9 May 2013 20:42:33 +0000 (16:42 -0400)]
drm/radeon: add clock voltage dep tables for acp, samu
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 9 May 2013 20:37:28 +0000 (16:37 -0400)]
drm/radeon: add structs to store vce clock voltage deps
Used for vce power management.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 6 May 2013 18:37:56 +0000 (14:37 -0400)]
drm/radeon/dpm: grab mvdd_dependency_on_mclk info from vbios
Required for dpm on CI.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 6 May 2013 16:15:33 +0000 (12:15 -0400)]
drm/radeon/dpm: add support for parsing the atom powertune table
Needed for DPM on CI.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 6 May 2013 15:31:04 +0000 (11:31 -0400)]
drm/radeon/dpm: update cac leakage table parsing for CI
Uses a different table format if the board supports EVV.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 29 Apr 2013 22:53:52 +0000 (18:53 -0400)]
drm/radeon: adjust si_dpm function for code sharing
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 21 Jun 2013 19:50:47 +0000 (15:50 -0400)]
drm/radeon: add get_temperature() callbacks for CIK (v2)
This added support for the on-chip thermal sensors on
CIK asics.
v2: fix register offset.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 16 Jul 2013 20:59:08 +0000 (16:59 -0400)]
drm/radeon: add KB/KV to r600_is_internal_thermal_sensor
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 26 Mar 2013 23:25:29 +0000 (19:25 -0400)]
drm/radeon: add CI to r600_is_internal_thermal_sensor()
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 23 Apr 2013 01:41:26 +0000 (21:41 -0400)]
drm/radeon: add support for thermal controller on KB/KV
No support for reading temperature back yet.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 23 Apr 2013 00:23:31 +0000 (20:23 -0400)]
drm/radeon/cik: add rlc helpers for DPM
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 19 Apr 2013 23:11:37 +0000 (19:11 -0400)]
drm/radeon: add structs to store uvd clock voltage deps
Used for uvd power management.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 19 Apr 2013 22:58:44 +0000 (18:58 -0400)]
drm/radeon: switch to pptable.h
Internally we switched to using a separate header for
atombios pplib definitions. Switch over the open source
driver.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 19 Apr 2013 17:29:43 +0000 (13:29 -0400)]
drm/radeon/sumo add helper to go from vid7 to vid2
Needed for DPM on KB/KV.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 19 Apr 2013 17:03:37 +0000 (13:03 -0400)]
drm/radeon: add indirect accessors for dift registers on CIK
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 23 Jul 2013 13:41:05 +0000 (09:41 -0400)]
drm/radeon: implement clock and power gating for CIK (v3)
Only the APUs support power gating.
v2: disable cgcg for now
v3: workaround hw issue in mgcg
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 17 Apr 2013 21:53:50 +0000 (17:53 -0400)]
drm/radeon: convert SI,CIK to use sumo_rlc functions
and remove duplicate si_rlc functions.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 17 Apr 2013 21:22:05 +0000 (17:22 -0400)]
drm/radeon: clean up sumo_rlc_init() for code sharing
This will eventually be shared with newer asics to
reduce code duplication.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 15 Apr 2013 21:13:29 +0000 (17:13 -0400)]
drm/radeon/cik: restructure rlc setup
Restructure rlc setup to handle clock and power
gating.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 4 Apr 2013 17:58:09 +0000 (13:58 -0400)]
drm/radeon: add support for ASPM on CIK asics
Enables PCIE ASPM (Active State Power Management) on
CIK asics.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 6 Aug 2013 15:29:39 +0000 (11:29 -0400)]
drm/radeon/cik: add support for pcie gen1/2/3 switching
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 21 Jun 2013 19:38:37 +0000 (15:38 -0400)]
drm/radeon: switch CIK to use radeon_ucode.h
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 19 Feb 2013 23:15:06 +0000 (18:15 -0500)]
drm/radeon/cik: implement some more atom helpers for DPM
Required for DPM on CIK.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 24 Jan 2013 15:03:39 +0000 (10:03 -0500)]
drm/radeon/kms: fix up dce8 display watermark calc for dpm
Calculate the low and high watermarks based on the low and high
clocks for the current power state. The dynamic pm hw will select
the appropriate watermark based on the internal dpm state.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 11 Jun 2013 21:55:39 +0000 (17:55 -0400)]
drm/radeon/dpm: use performance state if no UVD state
Newer asics don't have specific UVD states.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 5 Jul 2013 21:16:51 +0000 (17:16 -0400)]
drm/radeon: default to 1024M gart size on rv770+
Newer asics have a lot of vram so it's less of an
issue to waste a little more space for the gart
page table. This gives us some additional gart space
before having to migrate to non-gart system ram
for games, etc. where we use up most of vram.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 24 Jul 2013 18:59:48 +0000 (14:59 -0400)]
drm/radeon/dpm: rework thermal state handling
1. Handle the the thermal state directly in the work handler.
Remove the state selection function since nothing else uses it now.
2. On some asics there is no thermal state, so we just use a regular
state and force the low performance state.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 24 Jul 2013 16:12:49 +0000 (12:12 -0400)]
drm/radeon/dpm: use multiple UVD power states (v3)
Use the UVD handle information to determine which
which power states to select when using UVD. For
example, decoding a single SD stream requires much
lower clocks than multiple HD streams.
v2: switch to a cleaner dpm/uvd interface
v3: change the uvd power state while streams
are active if need be
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 5 Aug 2013 16:41:20 +0000 (12:41 -0400)]
drm/radeon: add UVD->DPM helper function (v5)
Add a helper function for counting the number of open stream handles.
v2: fix copy-pasta in comments and whitespace error
v3: make function static since it's only used in radeon_uvd.c
at the moment
v4: make non-static again for future changes
v5: make static again for new rework of dpm uvd changes
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 5 Aug 2013 16:37:32 +0000 (12:37 -0400)]
drm/radeon/kms: remove r6xx+ blit copy routines
No longer used now that we use the async dma engines or
CP DMA for bo copies.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 12 Jul 2013 18:52:30 +0000 (14:52 -0400)]
drm/radeon: switch r6xx+ to using CP DMA for the blit copy callback
CP DMA is lighter weight than using the 3D engine.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 12 Aug 2013 15:04:29 +0000 (11:04 -0400)]
drm/edid: add quirk for Medion MD30217PG
This LCD monitor (1280x1024 native) has a completely
bogus detailed timing (640x350@70hz). User reports that
1280x1024@60 has waves so prefer 1280x1024@75.
Manufacturer: MED Model: 7b8 Serial#: 99188
Year: 2005 Week: 5
EDID Version: 1.3
Analog Display Input, Input Voltage Level: 0.700/0.700 V
Sync: Separate
Max Image Size [cm]: horiz.: 34 vert.: 27
Gamma: 2.50
DPMS capabilities: Off; RGB/Color Display
First detailed timing is preferred mode
redX: 0.645 redY: 0.348 greenX: 0.280 greenY: 0.605
blueX: 0.142 blueY: 0.071 whiteX: 0.313 whiteY: 0.329
Supported established timings:
720x400@70Hz
640x480@60Hz
640x480@72Hz
640x480@75Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
800x600@75Hz
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1280x1024@75Hz
Manufacturer's mask: 0
Supported standard timings:
Supported detailed timing:
clock: 25.2 MHz Image Size: 337 x 270 mm
h_active: 640 h_sync: 688 h_sync_end 784 h_blank_end 800 h_border: 0
v_active: 350 v_sync: 350 v_sync_end 352 v_blanking: 449 v_border: 0
Monitor name: MD30217PG
Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
Serial No:
501099188
EDID (in hex):
00ffffffffffff0034a4b80774830100
050f010368221b962a0c55a559479b24
125054afcf00310a0101010101018180
000000000000d60980a0205e63103060
0200510e1100001e000000fc004d4433
3032313750470a202020000000fd0038
4c1e530e000a202020202020000000ff
003530313039393138380a2020200078
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: friedrich@mailstation.de
Cc: stable@vger.kernel.org
Jakob Bornecrantz [Thu, 29 Aug 2013 00:32:53 +0000 (02:32 +0200)]
drm/vmwgfx: Split GMR2_REMAP commands if they are to large
This fixes the piglit test texturing/max-texture-size
causing the VM to die due to a too large SVGA command.
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Biran Paul <brianp@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@gmail.com>
Dave Airlie [Thu, 29 Aug 2013 23:02:57 +0000 (09:02 +1000)]
Merge tag 'drm-intel-fixes-2013-08-30' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
Just a one-line patch to fix a black screen issue on rare ivb machines,
cc: stable. Normally I'd just shovel this into the -next pull request this
late in the -rc cycle, but Linus was making noises about not getting real
fixes which are cc: stable. So here we go ;-)
* tag 'drm-intel-fixes-2013-08-30' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: ivb: fix edp voltage swing reg val
Imre Deak [Fri, 23 Aug 2013 20:50:23 +0000 (23:50 +0300)]
drm/i915: ivb: fix edp voltage swing reg val
Fix the typo introduced in
commit
1a2eb4604b85c5efb343da8a4dcf41288fcfca85
Author: Keith Packard <keithp@keithp.com>
Date: Wed Nov 16 16:26:07 2011 -0800
drm/i915: Hook up Ivybridge eDP
This fixes eDP link-training failures and cases where all voltage swing
/pre-emphasis levels were tried and failed during clock recovery and -
as a fallback - we go on to do channel equalization with the last voltage
swing/pre-emphasis level which will succeed. Both issues can lead to a
blank screen.
v2:
- improve commit message
CC: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64880
Tested-by: Jeremy Moles <cubicool@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Linus Torvalds [Mon, 26 Aug 2013 00:43:22 +0000 (17:43 -0700)]
Linux 3.11-rc7
Linus Torvalds [Sun, 25 Aug 2013 19:44:15 +0000 (12:44 -0700)]
Merge tag 'staging-3.11-rc7' of git://git./linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are two tiny staging tree fixes (well, one is for an iio driver,
but those updates come through the staging tree due to dependancies)
One fixes a problem with an IIO driver, and the other fixes a bug in
the comedi driver core"
* tag 'staging-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: comedi: bug-fix NULL pointer dereference on failed attach
iio: adjd_s311: Fix non-scan mode data read
Linus Torvalds [Sun, 25 Aug 2013 19:43:44 +0000 (12:43 -0700)]
Merge tag 'usb-3.11-rc7' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are two USB fixes for 3.11-rc7
One fixes a reported regression in the OHCI driver, and the other
fixes a reported build breakage in the USB phy drivers"
* tag 'usb-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: phy: fix build breakage
USB: OHCI: add missing PCI PM callbacks to ohci-pci.c
Linus Torvalds [Sun, 25 Aug 2013 19:41:37 +0000 (12:41 -0700)]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
"This round of fixes is smaller than previous: a couple more updates
for the security fixes, and a one-liner kexec fix"
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7816/1: CONFIG_KUSER_HELPERS: fix help text
ARM: 7815/1: kexec: offline non panic CPUs on Kdump panic
ARM: 7819/1: fiq: Cast the first argument of flush_icache_range()
Linus Torvalds [Sun, 25 Aug 2013 19:25:38 +0000 (12:25 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"Assorted fixes from the last week or so"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: collect_mounts() should return an ERR_PTR
bfs: iget_locked() doesn't return an ERR_PTR
efs: iget_locked() doesn't return an ERR_PTR()
proc: kill the extra proc_readfd_common()->dir_emit_dots()
cope with potentially long ->d_dname() output for shmem/hugetlb
Linus Torvalds [Sat, 24 Aug 2013 18:34:33 +0000 (11:34 -0700)]
Merge tag 'acpi-3.11-rc7' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"I really hoped that it wouldn't be necessary to change anything in
ACPI at this point, but it turns out that we need to revert one more
ACPI video commit causing trouble.
This reverts a change in the ACPI video driver that caused the ACPI
backlight initialization to be carried out even if acpi_backlight=vendor
is passed in the kernel command line which turns out to break things
at least on one system"
* tag 'acpi-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI / video: Always call acpi_video_init_brightness() on init"
Linus Torvalds [Sat, 24 Aug 2013 18:33:21 +0000 (11:33 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of small bug fixes for lpfc and zfcp and a fix for a
fairly nasty bug in sg where a process which cancels I/O completes in
a kernel thread which would then try to write back to the now gone
userspace and end up writing to a random kernel address instead"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] zfcp: remove access control tables interface (keep sysfs files)
[SCSI] zfcp: fix schedule-inside-lock in scsi_device list loops
[SCSI] zfcp: fix lock imbalance by reworking request queue locking
[SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal
[SCSI] lpfc: Don't force CONFIG_GENERIC_CSUM on
Joern Rennecke [Sat, 24 Aug 2013 06:33:06 +0000 (12:03 +0530)]
ARC: [lib] strchr breakage in Big-endian configuration
For a search buffer, 2 byte aligned, strchr() was returning pointer
outside of buffer (buf - 1)
------------->8----------------
// Input buffer (default 4 byte aigned)
char *buffer = "1AA_";
// actual search start (to mimick 2 byte alignment)
char *current_line = &(buffer[2]);
// Character to search for
char c = 'A';
char *c_pos = strchr(current_line, c);
printf("%s\n", c_pos) --> 'AA_' as oppose to 'A_'
------------->8----------------
Reported-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Debugged-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: <stable@vger.kernel.org> # [3.9 and 3.10]
Cc: Noam Camus <noamc@ezchip.com>
Signed-off-by: Joern Rennecke <joern.rennecke@embecosm.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Carpenter [Wed, 14 Aug 2013 09:44:39 +0000 (12:44 +0300)]
VFS: collect_mounts() should return an ERR_PTR
This should actually be returning an ERR_PTR on error instead of NULL.
That was how it was designed and all the callers expect it.
[AV: actually, that's what "VFS: Make clone_mnt()/copy_tree()/collect_mounts()
return errors" missed - originally collect_mounts() was expected to return
NULL on failure]
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Dan Carpenter [Wed, 14 Aug 2013 09:51:03 +0000 (12:51 +0300)]
bfs: iget_locked() doesn't return an ERR_PTR
iget_locked() returns a NULL on error, it doesn't return an ERR_PTR.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Dan Carpenter [Wed, 14 Aug 2013 09:49:40 +0000 (12:49 +0300)]
efs: iget_locked() doesn't return an ERR_PTR()
The iget_locked() function returns NULL on error and never an ERR_PTR.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Oleg Nesterov [Sat, 24 Aug 2013 15:14:34 +0000 (17:14 +0200)]
proc: kill the extra proc_readfd_common()->dir_emit_dots()
proc_readfd_common() does dir_emit_dots() twice in a row,
we need to do this only once.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sat, 24 Aug 2013 16:08:17 +0000 (12:08 -0400)]
cope with potentially long ->d_dname() output for shmem/hugetlb
dynamic_dname() is both too much and too little for those - the
output may be well in excess of 64 bytes dynamic_dname() assumes
to be enough (thanks to ashmem feeding really long names to
shmem_file_setup()) and vsnprintf() is an overkill for those
guys.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Fri, 23 Aug 2013 17:59:42 +0000 (10:59 -0700)]
Merge branch 'for-3.11-fixes' of git://git./linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"This contains three commits all of which are updates for specific
devices which aren't too widespread. Pretty limited scope and nothing
too interesting or dangerous"
* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
sata_fsl: save irqs while coalescing
libata: apply behavioral quirks to sil3826 PMP
sata, highbank: fix ordering of SGPIO signals
Linus Torvalds [Fri, 23 Aug 2013 17:58:50 +0000 (10:58 -0700)]
Merge branch 'for-3.11-fixes' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"A late fix for cgroup.
This fixes a behavior regression visible to userland which was created
by a commit merged during -rc1. While the behavior change isn't too
likely to be noticeable, the fix is relatively low risk and we'll need
to backport it through -stable anyway if the bug gets released"
* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: fix a regression in validating config change
Linus Torvalds [Fri, 23 Aug 2013 17:46:28 +0000 (10:46 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Ben was on holidays for a week so a few nouveau regression fixes
backed up, but they all seem necessary.
Otherwise one i915 and one gma500 fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
gma500: Fix SDVO turning off randomly
drm/nv04/disp: fix framebuffer pin refcounting
drm/nouveau/mc: fix race condition between constructor and request_irq()
drm/nouveau: fix reclocking on nv40
drm/nouveau/ltcg: fix allocating memory as free
drm/nouveau/ltcg: fix ltcg memory initialization after suspend
drm/nouveau/fb: fix null derefs in nv49 and nv4e init
drm/i915: Invalidate TLBs for the rings after a reset
Anatolij Gustschin [Wed, 21 Aug 2013 15:43:31 +0000 (17:43 +0200)]
usb: phy: fix build breakage
Commit
94ae9843 (usb: phy: rename all phy drivers to phy-$name-usb.c)
renamed drivers/usb/phy/otg_fsm.h to drivers/usb/phy/phy-fsm-usb.h
but changed drivers/usb/phy/phy-fsm-usb.c to include not existing
"phy-otg-fsm.h" instead of new "phy-fsm-usb.h". This breaks building:
...
drivers/usb/phy/phy-fsm-usb.c:32:25: fatal error: phy-otg-fsm.h: No such file or directory
compilation terminated.
make[3]: *** [drivers/usb/phy/phy-fsm-usb.o] Error 1
This commit also missed to modify drivers/usb/phy/phy-fsl-usb.h
to include new "phy-fsm-usb.h" instead of "otg_fsm.h" resulting
in another build breakage:
...
In file included from drivers/usb/phy/phy-fsl-usb.c:46:0:
drivers/usb/phy/phy-fsl-usb.h:18:21: fatal error: otg_fsm.h: No such file or directory
compilation terminated.
make[3]: *** [drivers/usb/phy/phy-fsl-usb.o] Error 1
Fix both issues.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: stable <stable@vger.kernel.org> # 3.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Stern [Wed, 21 Aug 2013 14:33:17 +0000 (10:33 -0400)]
USB: OHCI: add missing PCI PM callbacks to ohci-pci.c
Commit
c1117afb8589 (USB: OHCI: make ohci-pci a separate driver)
neglected to preserve the entries for the pci_suspend and pci_resume
driver callbacks. As a result, OHCI controllers don't work properly
during suspend and after hibernation.
This patch adds the missing callbacks to the driver.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Steve Cotton <steve@s.cotton.clara.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>