OSDN Git Service
Linux Build Service Account [Thu, 15 Mar 2018 12:43:20 +0000 (05:43 -0700)]
Merge "drm/msm : add null check on framebuffer in cleanup"
Linux Build Service Account [Thu, 15 Mar 2018 12:43:18 +0000 (05:43 -0700)]
Merge "msm: kgsl: Fix XO shutdown issue"
Linux Build Service Account [Thu, 15 Mar 2018 12:43:17 +0000 (05:43 -0700)]
Merge "msm: isp: Clear irq status if irq is set again with same value"
Linux Build Service Account [Thu, 15 Mar 2018 12:43:15 +0000 (05:43 -0700)]
Merge "msm: isp: Add pingpong status to tasklet command"
Linux Build Service Account [Thu, 15 Mar 2018 12:43:14 +0000 (05:43 -0700)]
Merge "ARM: dts: msm: Configure I2C instances for bus recovery"
Linux Build Service Account [Thu, 15 Mar 2018 12:43:12 +0000 (05:43 -0700)]
Merge "msm: mdss: dp: do not include VICs from YC420 VDB"
Linux Build Service Account [Thu, 15 Mar 2018 12:43:11 +0000 (05:43 -0700)]
Merge " msm: mdss: hdcp_1x: enable HDP irq only for DP client"
Linux Build Service Account [Thu, 15 Mar 2018 12:43:09 +0000 (05:43 -0700)]
Merge "msm: mdss: dp: fix wrong parsing of sink count"
Linux Build Service Account [Thu, 15 Mar 2018 12:43:07 +0000 (05:43 -0700)]
Merge "msm: mdss: hdmi: fix HDCP1.4 authentication issues"
Linux Build Service Account [Thu, 15 Mar 2018 12:43:05 +0000 (05:43 -0700)]
Merge "msm: mdss: hdmi: add SRM support for HDCP1.4"
Linux Build Service Account [Thu, 15 Mar 2018 12:43:03 +0000 (05:43 -0700)]
Merge "msm: mdss: Clear pp dirty flags based on program stage"
Linux Build Service Account [Thu, 15 Mar 2018 12:43:02 +0000 (05:43 -0700)]
Merge "msm: mdss: hdmi: modify audio event notification sequence."
Linux Build Service Account [Thu, 15 Mar 2018 12:43:00 +0000 (05:43 -0700)]
Merge "msm: mdss: hdmi: reset basic_audio_support parameter"
Linux Build Service Account [Thu, 15 Mar 2018 12:42:57 +0000 (05:42 -0700)]
Merge "input: touchscreen: Fix error code in Atmel driver"
Linux Build Service Account [Thu, 15 Mar 2018 12:42:55 +0000 (05:42 -0700)]
Merge "input: touchscreen: Fix uninitialized variable usage in Atmel driver"
Linux Build Service Account [Thu, 15 Mar 2018 12:42:53 +0000 (05:42 -0700)]
Merge "msm: sde: fix compiler uninitialized warning"
Linux Build Service Account [Thu, 15 Mar 2018 12:42:52 +0000 (05:42 -0700)]
Merge "drm: msm: dsi: fix local variable not initialized issue"
Linux Build Service Account [Thu, 15 Mar 2018 12:42:50 +0000 (05:42 -0700)]
Merge "drm/msm/sde: fix flush configuration for physical encoder"
Linux Build Service Account [Thu, 15 Mar 2018 12:42:48 +0000 (05:42 -0700)]
Merge "input: touchscreen: synaptics_dsx: Fix uninitialized variable usage"
Linux Build Service Account [Thu, 15 Mar 2018 12:42:47 +0000 (05:42 -0700)]
Merge "input: touchscreen: synaptics_dsx: Handle failure case during probe"
Linux Build Service Account [Thu, 15 Mar 2018 12:42:45 +0000 (05:42 -0700)]
Merge "defconfig: msm: Disable secure qsee support for msm8996 auto"
Linux Build Service Account [Thu, 15 Mar 2018 12:42:43 +0000 (05:42 -0700)]
Merge "drm: msm: sde: fix potential NULL pointer dereference"
Linux Build Service Account [Thu, 15 Mar 2018 12:42:42 +0000 (05:42 -0700)]
Merge "fb: msm_dba: fix local variable not initialized issue"
Linux Build Service Account [Thu, 15 Mar 2018 12:42:40 +0000 (05:42 -0700)]
Merge "ASoC: msm: Upgrade AFE TDM Driver to support 32 Channels"
Suprith Malligere Shankaregowda [Tue, 6 Mar 2018 06:21:23 +0000 (11:51 +0530)]
msm: kgsl: Fix XO shutdown issue
This patch ensures device resumes successfully after
XO shutdown without any KGSL error.
Change-Id: I9eb8e281bc62793dc7521ba72aaeecf946860851
Signed-off-by: Suprith Malligere Shankaregowda <supgow@codeaurora.org>
Srikanth Uyyala [Wed, 14 Mar 2018 05:12:10 +0000 (10:42 +0530)]
msm: isp: Clear irq status if irq is set again with same value
Sometimes same irq is received even after clearing irq.
make sure irq status is rest by clearing the irq again.
Change-Id: Ib5355a4b9952fa7f02d1dea69b5fb767928e4b9f
Signed-off-by: Srikanth Uyyala <suyyala@codeaurora.org>
Srikanth Uyyala [Mon, 12 Mar 2018 13:14:40 +0000 (18:44 +0530)]
msm: isp: Add pingpong status to tasklet command
We read pingpong status while handling axi and stats irqs
in tasklet. Due to scheduling delays in tasklet pingpong status is
changing by the time we read. So, read ping pong status in ISR
and forward it to tasklet.
Change-Id: Ib83929cb8e15c28e34ee06275a87b5d6fbfd00e6
Signed-off-by: Srikanth Uyyala <suyyala@codeaurora.org>
Narender Ankam [Tue, 14 Nov 2017 13:10:15 +0000 (18:40 +0530)]
msm: mdss: hdmi: fix HDCP1.4 authentication issues
After part I authentication, SW DDC is not disabled and because of
this, we observe arbitration issues during part III authentication.
Disable SW DDC before starting part III of HDCP authentication.
Fail part II of authentication with repeater if its device count is zero.
Change-Id: I72f5b1115c094d4a72ae2b324f3903cdb195e5fe
Signed-off-by: Narender Ankam <nankam@codeaurora.org>
Narender Ankam [Tue, 14 Nov 2017 12:51:49 +0000 (18:21 +0530)]
msm: mdss: hdmi: add SRM support for HDCP1.4
Extend HDCP1.4 SRM support for fb based hdmi driver as well.
Change-Id: I3d6597503d95b066d1fcfa71218cdda70965fbd0
Signed-off-by: Narender Ankam <nankam@codeaurora.org>
Narender Ankam [Wed, 8 Nov 2017 10:49:12 +0000 (16:19 +0530)]
msm: mdss: hdmi: add SRM support for HDCP2.2
Extend HDCP2.2 SRM support for fb based hdmi driver as well.
Change-Id: I39bef2a814c2a2404a0a03584f23c58c69c10909
Signed-off-by: Narender Ankam <nankam@codeaurora.org>
Narender Ankam [Thu, 16 Nov 2017 13:38:03 +0000 (19:08 +0530)]
msm: mdss: dp: do not include VICs from YC420 VDB
Display Port driver never supported YC420 formats.
Also w.r.t to display quality, 4K30 RGB 8bit is
better than 4K60 YC420 8bit.
So, do not include edid modes(VICs) from YC420 Video
Data Block while parsing EDID.
Change-Id: I77f2c45c22beceb7f554a4c063f6e6947dc4ba8a
Signed-off-by: Narender Ankam <nankam@codeaurora.org>
Ch Ganesh Kumar [Mon, 4 Sep 2017 15:25:07 +0000 (20:55 +0530)]
msm: mdss: Clear pp dirty flags based on program stage
Clear PP features dirty flags only when they are programmed, based on
programming stage, i.e. clear dirty flags of features programmed in
early stage after early stage programming and clear dirty flags of
features programmed in deferred stage after their actual programming
is complete.
Clearing the flags in one go is resulting in missing programming of
features designated to be programmed in early stage, if the dirty flags
are updated in between the stages.
Change-Id: If65a5982254a7421c6f0ec32018361c651964e4e
Signed-off-by: Ch Ganesh Kumar <chganesh@codeaurora.org>
Narender Ankam [Tue, 24 Oct 2017 09:29:15 +0000 (14:59 +0530)]
msm: mdss: hdmi: modify audio event notification sequence.
Audio event is wrongly notified during pre_panel_off event.
Modify HDMI Audio event notification sequence so that audio
events are notified as expected.
CRs-Fixed:
2131442
Change-Id: I5fb5d28cb0162f0c4bf97e29556b15d12e1ea8f1
Signed-off-by: Narender Ankam <nankam@codeaurora.org>
Narender Ankam [Wed, 25 Oct 2017 06:54:00 +0000 (12:24 +0530)]
msm: mdss: hdmi: reset basic_audio_support parameter
Add changes to reset basic_audio_support parameter
before parsing EDID on every new cable connection.
Change-Id: I52fef059830d950d4858d5bee3f76774426e6863
Signed-off-by: Narender Ankam <nankam@codeaurora.org>
Narender Ankam [Wed, 4 Oct 2017 12:57:19 +0000 (18:27 +0530)]
msm: mdss: dp: fix wrong parsing of sink count
Current Display Port driver is incorrectly parsing sink count
register (0x200) of DPCD. Made changes to parse it correctly
as per DP specification.
Change-Id: Ic858485f19f226f7b2d84f74c97170db8bebf822
Signed-off-by: Narender Ankam <nankam@codeaurora.org>
Venkata Prahlad Valluru [Tue, 13 Mar 2018 11:16:02 +0000 (16:46 +0530)]
input: touchscreen: Fix uninitialized variable usage in Atmel driver
Initialize variables that are passed by reference, so that
they can be used safely afterwards, irrespective of the
called function actions.
Change-Id: Ib52c1cbc621913b21eb9520d305327ff5fd154fe
Signed-off-by: Venkata Prahlad Valluru <vvalluru@codeaurora.org>
Venkata Prahlad Valluru [Tue, 13 Mar 2018 11:38:29 +0000 (17:08 +0530)]
input: touchscreen: Fix error code in Atmel driver
Set the error code to be returned in case of failure.
Change-Id: I2cd818b21decb659de74fde1ac5c667d8606420e
Signed-off-by: Venkata Prahlad Valluru <vvalluru@codeaurora.org>
Venkata Prahlad Valluru [Tue, 13 Mar 2018 10:17:23 +0000 (15:47 +0530)]
input: touchscreen: Handle failure case in Atmel driver
Handle file already exists and failure case separately.
Change-Id: I0c8004c88feb323b592ad8f622f86fe66cb63006
Signed-off-by: Venkata Prahlad Valluru <vvalluru@codeaurora.org>
Maria Yu [Thu, 30 Nov 2017 02:31:38 +0000 (10:31 +0800)]
msm: sde: fix compiler uninitialized warning
Initialize local variable desc being zeroed to fix
compiler uninitialized warning.
Change-Id: I2a109e65bfd13ddc94d4b6e465d07c3a1cc0cd34
Signed-off-by: Maria Yu <aiquny@codeaurora.org>
Linux Build Service Account [Tue, 13 Mar 2018 22:20:27 +0000 (15:20 -0700)]
Merge "ARM: dts: msm: Fix subsys notification virtualization device instance"
Venkata Prahlad Valluru [Tue, 13 Mar 2018 13:24:30 +0000 (18:54 +0530)]
input: touchscreen: synaptics_dsx: Fix uninitialized variable usage
Initialize variables that are passed by reference, so that
they can be used safely afterwards, irrespective of the
called function actions.
Change-Id: Ib95f3aa3077d6ef7aaaabcfc6c882790b6406793
Signed-off-by: Venkata Prahlad Valluru <vvalluru@codeaurora.org>
Venkata Prahlad Valluru [Tue, 13 Mar 2018 13:18:44 +0000 (18:48 +0530)]
input: touchscreen: synaptics_dsx: Handle failure case during probe
Handle create_singlethread_workqueue api failure case.
Change-Id: Ic3f45fddfbd40d8a78dd888eed5f01120809adee
Signed-off-by: Venkata Prahlad Valluru <vvalluru@codeaurora.org>
Shrey Vijay [Tue, 18 Jul 2017 11:59:08 +0000 (17:29 +0530)]
ARM: dts: msm: Configure I2C instances for bus recovery
Configure all I2C instances of SDM660, MSM8996 and MSM8998 for
SW bit banging based bus recovery mechanism. HW recovery may
not work as expected when HW samples the data line and finds
it low during particular clocking period of the recovery.
Use SW bit banging instead, where SW generate clock pulses and
sniff data line until data line is released by the slave.
Signed-off-by: Shrey Vijay <shreyv@codeaurora.org>
Change-Id: Ia0ed92cd0d88df04a17a295f23970940dab3da03
Guchun Chen [Fri, 9 Mar 2018 08:14:14 +0000 (16:14 +0800)]
drm: msm: sde: fix potential NULL pointer dereference
Pointer should be checked after returning from function or being
passed from other function. So add checker for this to avoid NULL
pointer dereference.
Change-Id: Ie86f47230b50433e08259ee5f6bbb52bedf749b1
CRs-Fixed:
2202957
Signed-off-by: Guchun Chen <guchunc@codeaurora.org>
Linux Build Service Account [Tue, 13 Mar 2018 04:20:51 +0000 (21:20 -0700)]
Merge "clk: qcom: Remove the CLK_SET_RATE_PARENT flag for Byte intferface clk"
Guchun Chen [Tue, 13 Mar 2018 04:04:59 +0000 (12:04 +0800)]
drm: msm: dsi: fix local variable not initialized issue
Local variable in function should be initialized before using it.
Change-Id: I061b10913182ed11b7a8cdb1baab900ac7e10ea6
CRs-Fixed:
2202957
Signed-off-by: Guchun Chen <guchunc@codeaurora.org>
Guchun Chen [Fri, 9 Mar 2018 06:02:59 +0000 (14:02 +0800)]
fb: msm_dba: fix local variable not initialized issue
Local variable in function should be initialized before using it.
Change-Id: I132033fa650cdacae3c8b2a98b8a593d159fe967
CRs-Fixed:
2202957
Signed-off-by: Guchun Chen <guchunc@codeaurora.org>
Linux Build Service Account [Mon, 12 Mar 2018 18:49:57 +0000 (11:49 -0700)]
Merge "mmc: sd: limit SD card power limit according to cards capabilities"
Anant Goel [Mon, 12 Mar 2018 18:14:35 +0000 (11:14 -0700)]
ARM: dts: msm: Fix subsys notification virtualization device instance
Add a bracket to fix the device instance for the subsystem_notif_virt
device.
Change-Id: Ib114a6d520aafbbcb0886dcf987d0509af80b636
Signed-off-by: Anant Goel <anantg@codeaurora.org>
Rashi Bindra [Mon, 5 Mar 2018 09:48:13 +0000 (15:18 +0530)]
clk: qcom: Remove the CLK_SET_RATE_PARENT flag for Byte intferface clk
If the CLK_SET_RATE_PARENT flag for the mmss_mdss_byte_intf_div_clk
divider is set re-calculation of dividers in DSI byte clock path takes
place which causes both the byte clock and byte interface clock to be
set to the same value.
Change-Id: Ia30c8070ec5c451a12f29e983089a7a2bbe6a8b3
Signed-off-by: Rashi Bindra <rbindra@codeaurora.org>
Linux Build Service Account [Mon, 12 Mar 2018 09:47:15 +0000 (02:47 -0700)]
Merge "ASoC: msm: Fix repeated reg phy stream issue"
Linux Build Service Account [Mon, 12 Mar 2018 09:47:14 +0000 (02:47 -0700)]
Merge "ASoC: msm: qdsp6v2: check for buffer size before read"
Linux Build Service Account [Mon, 12 Mar 2018 09:47:13 +0000 (02:47 -0700)]
Merge "fbdev: msm: Set the commit_in_progress flag after sync_fence_wait"
Russell King [Sat, 2 Jan 2016 10:06:29 +0000 (10:06 +0000)]
mmc: sd: limit SD card power limit according to cards capabilities
The SD card specification allows cards to error out a SWITCH command
where the requested function in a group is not supported. The spec
provides for a set of capabilities which indicate which functions are
supported.
In the case of the power limit, requesting an unsupported power level
via the SWITCH command fails, resulting in the power level remaining at
the power-on default of 0.72W, even though the host and card may support
higher powers levels.
This has been seen with SanDisk 8GB cards, which support the default
0.72W and 1.44W (200mA and 400mA) in combination with an iMX6 host,
supporting up to 2.88W (800mA). This currently causes us to try to set
a power limit function value of '3' (2.88W) which the card errors out
on, and thereby causes the power level to remain at 0.72W rather than
the desired 1.44W.
Arrange to limit the selected current limit by the capabilities reported
by the card to avoid the SWITCH command failing. Select the highest
current limit that the host and card combination support.
Change-Id: I7fbd035cdc606946e997fa4671ec5683acd3ed1b
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Fixes:
a39ca6ae0a08 ("mmc: core: Simplify and fix
for SD switch processing")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Git-commit:
d9812780a020bcec44565b5950b2a8b31afb5545
Git-repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
Signed-off-by: Pradeep P V K <ppvk@codeaurora.org>
Linux Build Service Account [Sun, 11 Mar 2018 05:18:50 +0000 (21:18 -0800)]
Merge "msm: ipa: Fix to handle NULL pointer dereference"
Mohammed Javid [Tue, 20 Feb 2018 10:31:26 +0000 (16:01 +0530)]
msm: ipa: Fix to handle NULL pointer dereference
Header entry deleted but same entry pointer using in
routing table not updated. Added checks to confirm
header entry present or not before using it to avoid
null pointer dereference.
Change-Id: Id1d844c60b2dcb0cc7cf18352b78d62fe5a89347
Acked-by: Ashok Vuyyuru <avuyyuru@qti.qualcomm.com>
Signed-off-by: Mohammed Javid <mjavid@codeaurora.org>
Linux Build Service Account [Sat, 10 Mar 2018 07:14:55 +0000 (23:14 -0800)]
Merge "[drm-sde] remove additional release fence offset"
Linux Build Service Account [Sat, 10 Mar 2018 07:14:54 +0000 (23:14 -0800)]
Merge "ARM: dts: msm: Configure GPIO98 as the active output for Mizar"
Linux Build Service Account [Sat, 10 Mar 2018 07:14:52 +0000 (23:14 -0800)]
Merge "ARM: dts: msm: Add subsys notification virtualization on msm8996 vplatform"
Linux Build Service Account [Sat, 10 Mar 2018 07:14:50 +0000 (23:14 -0800)]
Merge "ath10k: Skip reading of utf.bin file"
Camus Wong [Fri, 2 Mar 2018 19:14:30 +0000 (14:14 -0500)]
[drm-sde] remove additional release fence offset
Remove additional release fence offset to fix deadlock between
graphics and display when only two buffers are used.
Change-Id: Ifc94dae28484e13fae6cb9a7dfd19c1cb13c7c20
Signed-off-by: Camus Wong <camusw@codeaurora.org>
Lakshmi Narayana Kalavala [Tue, 20 Feb 2018 19:51:39 +0000 (11:51 -0800)]
drm/msm : add null check on framebuffer in cleanup
Add null check on pointer to fb before dereferencing.
CRs-Fixed:
2124966
Change-Id: Ic88aee498c432c8e9350f2d2fad538acd2a9b37f
Signed-off-by: Harsh Sahu <hsahu@codeaurora.org>
Signed-off-by: Lakshmi Narayana Kalavala <lkalaval@codeaurora.org>
Bharathraj Nagaraju [Tue, 6 Mar 2018 00:36:19 +0000 (16:36 -0800)]
ARM: dts: msm: Configure GPIO98 as the active output for Mizar
Configure GPIO98 as active output & drive low.
Delete pinctrl property for audio_ext_clk node.
Change-Id: Ic5178ff44a89433848bdd1a92bc3e3b122aeeffd
Signed-off-by: Bharathraj Nagaraju <snbraj@codeaurora.org>
Karthikeyan Mani [Tue, 6 Mar 2018 19:04:49 +0000 (11:04 -0800)]
ASoC: msm: qdsp6v2: check for buffer size before read
Check for debugfs ops buf size passed before reading
to eliminate the possibility of reading out of bounds.
Change-Id: I28fd60ce93256b6b0bad62b449092a891cc15463
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Linux Build Service Account [Fri, 9 Mar 2018 10:47:56 +0000 (02:47 -0800)]
Merge "scsi: ufs: do not destroy clk scaling work queue if it is NULL"
Linux Build Service Account [Fri, 9 Mar 2018 10:47:54 +0000 (02:47 -0800)]
Merge "asoc: msm: add check for integer overflow"
Linux Build Service Account [Fri, 9 Mar 2018 10:47:53 +0000 (02:47 -0800)]
Merge "mm/migration: make isolate_movable_page() return int type"
Linux Build Service Account [Fri, 9 Mar 2018 10:47:52 +0000 (02:47 -0800)]
Merge "mm/hotplug: enable memory hotplug for non-lru movable pages"
Linux Build Service Account [Fri, 9 Mar 2018 10:47:51 +0000 (02:47 -0800)]
Merge "profiler: memset cnt_buf before use"
Linux Build Service Account [Fri, 9 Mar 2018 10:47:49 +0000 (02:47 -0800)]
Merge "soc: qcom: subsystem_notif_virt: Add virtual subsystem notification driver"
Rakesh Pillai [Tue, 6 Mar 2018 06:18:55 +0000 (11:48 +0530)]
ath10k: Skip reading of utf.bin file
The non-bmi targets do need to load firmware from the
driver and is loaded by other procedure.
Since, utf.bin file is not needed, this change skips parsing
and loading of the same.
Change-Id: Id7cc0b1cd75f813c1b6c762685d8806a30ba8295
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Cong Tang [Tue, 6 Mar 2018 04:04:19 +0000 (12:04 +0800)]
ASoC: msm: Fix repeated reg phy stream issue
Fix repeated reg phy stream issue in loopback driver
which cause audio dsp calibration failure due to
rtac device could not remove successfully.
Change-Id: Ifa1b9cd579bc313d4addc00d48a8b4b636181220
Signed-off-by: Cong Tang <congt@codeaurora.org>
Anant Goel [Wed, 7 Feb 2018 03:01:23 +0000 (19:01 -0800)]
ARM: dts: msm: Add subsys notification virtualization on msm8996 vplatform
Add subsystem_notif_virt device to support subsystem
notifications virtualization for subsystems.
Change-Id: Icc8118e834e2c1c0e54fc7380fe3ea8c7a173665
Signed-off-by: Anant Goel <anantg@codeaurora.org>
Linux Build Service Account [Thu, 8 Mar 2018 12:27:51 +0000 (04:27 -0800)]
Merge "DRM: SDE: Fix potential buffer overflow in SDE encoder"
Anant Goel [Wed, 7 Feb 2018 01:46:38 +0000 (17:46 -0800)]
soc: qcom: subsystem_notif_virt: Add virtual subsystem notification driver
The guest VM uses this driver to communicate subsystem state related
notifications to a backend driver via the virtual device's registers.
Change-Id: I612fcb641c4d531c1d2c0fd18f44f7ebff040f2c
Signed-off-by: Anant Goel <anantg@codeaurora.org>
Linux Build Service Account [Wed, 7 Mar 2018 17:16:41 +0000 (09:16 -0800)]
Merge "i2c-msm-v2: Replace HW recovery mechanism with SW bit-banging"
Linux Build Service Account [Wed, 7 Mar 2018 17:16:39 +0000 (09:16 -0800)]
Merge "ais: match type to avoid array overflow"
Linux Build Service Account [Wed, 7 Mar 2018 17:16:38 +0000 (09:16 -0800)]
Merge "sched: add sched_get_cpu_last_busy_time() API"
Linux Build Service Account [Wed, 7 Mar 2018 17:16:37 +0000 (09:16 -0800)]
Merge "Revert "ARM: dts: msm: Disable SPI CAN controller on msm8996 CV2X boards""
Linux Build Service Account [Wed, 7 Mar 2018 17:16:36 +0000 (09:16 -0800)]
Merge "clk: qcom: mdss: improve DSI PLL's performance"
Linux Build Service Account [Wed, 7 Mar 2018 17:16:34 +0000 (09:16 -0800)]
Merge "msm: vidc: enable port reconfig for thumbnail session"
Linux Build Service Account [Wed, 7 Mar 2018 17:16:32 +0000 (09:16 -0800)]
Merge "Merge android-4.4.118 (
5f7f76a) into msm-4.4"
Linux Build Service Account [Wed, 7 Mar 2018 17:16:32 +0000 (09:16 -0800)]
Merge "Merge android-4.4.117 (
4ec3656) into msm-4.4"
Linux Build Service Account [Wed, 7 Mar 2018 17:16:31 +0000 (09:16 -0800)]
Merge "Merge android-4.4.116 (
20ddb25) into msm-4.4"
Linux Build Service Account [Wed, 7 Mar 2018 17:16:29 +0000 (09:16 -0800)]
Merge "clk: msm: Add reset support in dummy clock driver"
Zhiqiang Tu [Wed, 7 Mar 2018 07:28:39 +0000 (15:28 +0800)]
defconfig: msm: Disable secure qsee support for msm8996 auto
Automotive platform doesn't need secure qsee support.
Change-Id: I9f7885b6057bb44c158eb5e32ebbff85bb598c2e
Signed-off-by: Zhiqiang Tu <ztu@codeaurora.org>
Gustavo Solaira [Tue, 6 Mar 2018 18:30:06 +0000 (10:30 -0800)]
Revert "ARM: dts: msm: Disable SPI CAN controller on msm8996 CV2X boards"
This reverts commit
a8c85fc795c063a09a96972c838fa80c520c3837.
Reverted because support for MPC5746C SPI-CAN is being
added back to the platform.
Change-Id: Ib14caf39a8cba9c6028abceb85adcd43df53ba06
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Lei wang [Wed, 7 Mar 2018 05:57:31 +0000 (13:57 +0800)]
profiler: memset cnt_buf before use
fix cnf_buf.cmd is uninitialized in bw_profiling_get
Change-Id: I9638fe423e6768c66a85e80c0d5175b8a33c1901
Signed-off-by: Lei wang <leiwan@codeaurora.org>
Can Guo [Thu, 1 Mar 2018 03:10:39 +0000 (11:10 +0800)]
scsi: ufs: do not destroy clk scaling work queue if it is NULL
Function ufshcd_hba_exit might be called to destroy clk scaling work queue
if failure happends in function ufshcd_init before clk gating work queue
is created. This change fixs it by skipping destroying clk scaling work
queue if it is NULL.
Change-Id: Ifb1c46f490749e4afe7cea331c29d073175f68ef
Signed-off-by: Can Guo <cang@codeaurora.org>
Linux Build Service Account [Wed, 7 Mar 2018 04:57:59 +0000 (20:57 -0800)]
Merge "drm/msm-hyp: overwrite hyp ioctls used by libgbm"
Linux Build Service Account [Wed, 7 Mar 2018 04:57:57 +0000 (20:57 -0800)]
Merge "ath10k: fix the invalid STA disconnect after wow resume"
Linux Build Service Account [Wed, 7 Mar 2018 04:57:55 +0000 (20:57 -0800)]
Merge "defconfig: arm64: msm: Enable SPMI msm8996 virtual platform"
Linux Build Service Account [Wed, 7 Mar 2018 04:57:54 +0000 (20:57 -0800)]
Merge "ASoC: msm: Support Channel Mixer Cfg"
Linux Build Service Account [Wed, 7 Mar 2018 04:57:53 +0000 (20:57 -0800)]
Merge "ARM: dts: msm: Disable usb phy by default on msm8996 vplatform"
Linux Build Service Account [Wed, 7 Mar 2018 04:57:52 +0000 (20:57 -0800)]
Merge "spmi: msm: correct len part in formatted cmd value."
Linux Build Service Account [Wed, 7 Mar 2018 04:57:50 +0000 (20:57 -0800)]
Merge "drm/msm: HPD_OFF Property for SDE HDMI Connector"
Guchun Chen [Wed, 28 Feb 2018 05:47:49 +0000 (13:47 +0800)]
clk: qcom: mdss: improve DSI PLL's performance
To improve performance margin for DSI's PLL at cold temperature case,
the value of DSIPHY_PLL_PLL_ICPMSET should be changed from 0x24 to 0x3f.
Change-Id: I139e37e137355c5e8f0b3bebd28b23a09593dd13
Signed-off-by: Guchun Chen <guchunc@codeaurora.org>
Camus Wong [Fri, 16 Feb 2018 20:05:57 +0000 (15:05 -0500)]
drm/msm-hyp: overwrite hyp ioctls used by libgbm
Handle ioctls called by libgbm in the virtual kernel driver
to support front-end library and avoid modifying libgbm.
Change-Id: Ie4e567cea7338b4ba68080decf85dfa45e040dac
Signed-off-by: Camus Wong <camusw@codeaurora.org>
Pavankumar Kondeti [Fri, 9 Feb 2018 08:23:04 +0000 (13:53 +0530)]
sched: add sched_get_cpu_last_busy_time() API
sched_get_cpu_last_busy_time() returns the last time stamp when
a given CPU is busy with more than 2 runnable tasks or has load
greater than 50% of it's max capacity. The LPM driver can make
use of this API and create a policy to prevent a recently loaded
CPU entering deep sleep state.
This API is implemented only for the higher capacity CPUs in
the system. It returns 0 for other CPUs.
Change-Id: I97ef47970a71647f4f55f21165d0cc1351770a53
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Sarada Prasanna Garnayak [Fri, 2 Mar 2018 09:00:30 +0000 (14:30 +0530)]
ath10k: fix the invalid STA disconnect after wow resume
Clear the previous wakeup reason data and reset the wakeup
reason event field to avoid the STA disconnect with invalid
wow event.
CRs-Fixed:
2199100
Change-Id: If45b5ae6e6f93ab9068b59a5e31f46b829363936
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>