OSDN Git Service
Markus Armbruster [Wed, 2 Jun 2010 16:48:27 +0000 (18:48 +0200)]
blockdev: Collect block device code in new blockdev.c
Anything that moves hundreds of lines out of vl.c can't be all bad.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Wed, 2 Jun 2010 11:31:56 +0000 (13:31 +0200)]
qdev: Move declaration of qdev_init_bdrv() into qdev.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Wed, 2 Jun 2010 11:31:55 +0000 (13:31 +0200)]
blockdev: Hide QEMUMachine from drive_init()
To pave the way for moving it out of vl.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
MORITA Kazutaka [Fri, 28 May 2010 02:44:58 +0000 (11:44 +0900)]
block: call the snapshot handlers of the protocol drivers
When snapshot handlers are not defined in the format driver, it is
better to call the ones of the protocol driver. This enables us to
implement snapshot support in the protocol driver.
We need to call bdrv_close() and bdrv_open() handlers of the format
driver before and after bdrv_snapshot_goto() call of the protocol. It is
because the contents of the block driver state may need to be changed
after loading vmstate.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
MORITA Kazutaka [Fri, 28 May 2010 02:44:57 +0000 (11:44 +0900)]
close all the block drivers before the qemu process exits
This patch calls the close handler of the block driver before the qemu
process exits.
This is necessary because the sheepdog block driver releases the lock
of VM images in the close handler.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 1 Jun 2010 16:37:31 +0000 (18:37 +0200)]
block: Assume raw for drives without media
qemu -cdrom /dev/cdrom with an empty CD-ROM drive doesn't work any more because
we try to guess the format and when this fails (because there is no medium) we
exit with an error message.
This patch should restore the old behaviour by assuming raw format for such
drives.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 1 Jun 2010 11:20:57 +0000 (13:20 +0200)]
Fix error message in drive_init
The real error is the return value of bdrv_open. errno might be overwritten or
not even set to that value in the first place.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Tue, 1 Jun 2010 18:32:35 +0000 (20:32 +0200)]
scsi: Fix info qtree for scsi-disk.ver
Show the actual default value instead of <null> when the property has
not been set.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Tue, 1 Jun 2010 18:32:34 +0000 (20:32 +0200)]
scsi: Turn drive serial into a qdev property scsi-disk.serial
It needs to be a qdev property, because it belongs to the drive's
guest part.
Bonus: info qtree now shows the serial number.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Tue, 1 Jun 2010 18:32:33 +0000 (20:32 +0200)]
ide: Fix info qtree for ide-drive.ver
Show the actual default value instead of <null> when the property has
not been set.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Tue, 1 Jun 2010 18:32:32 +0000 (20:32 +0200)]
ide: Turn drive serial into a qdev property ide-drive.serial
It needs to be a qdev property, because it belongs to the drive's
guest part.
Bonus: info qtree now shows the serial number.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Tue, 1 Jun 2010 18:32:31 +0000 (20:32 +0200)]
qdev: Don't leak string property value on hot unplug
parse_string() qemu_strdup()s the property value. It is never freed.
It needs to be freed along with the device. Otherwise, the value of
scsi-disk property "ver" gets leaked when hot-unplugging the disk, for
instance.
Call new PropertyInfo method free() from qdev_free(). Implement it
for qdev_prop_string.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Tue, 1 Jun 2010 18:32:30 +0000 (20:32 +0200)]
qdev: New qdev_prop_set_string()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Tue, 1 Jun 2010 18:32:29 +0000 (20:32 +0200)]
ide: Split non-qdev code off ide_init2()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Tue, 1 Jun 2010 18:32:28 +0000 (20:32 +0200)]
ide: Change ide_init_drive() to require valid dinfo argument
IDEState members drive_serial_str and version are now left empty until
an actual drive is connected. Before, they got a default value that
was overwritten when a drive got connected. Doesn't matter, because
they're used only while a drive is connected.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Fri, 28 May 2010 13:38:47 +0000 (15:38 +0200)]
ide: Split ide_init1() off ide_init2()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Fri, 28 May 2010 13:38:46 +0000 (15:38 +0200)]
ide: Remove redundant IDEState member conf
Commit
428c149b added IDEState member conf to let commit
0009baf1 find
the BlockConf from there. It exists only for qdev drives, created via
ide_drive_initfn(), not for drives created via ide_init2().
But for a qdev drive, we can just as well reach its IDEDevice, which
contains the BlockConf. Do that, and revert the parts of commit
428c149b that add IDEState member conf.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Fri, 28 May 2010 13:38:45 +0000 (15:38 +0200)]
ide: Remove useless IDEDeviceInfo members unit, drive
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Fri, 28 May 2010 13:38:44 +0000 (15:38 +0200)]
usb: Remove unused usb_device_add() parameter is_hotplug
Unused since commit
b3e461d3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Fri, 28 May 2010 13:38:43 +0000 (15:38 +0200)]
blockdev: Belatedly remove driveopts
Unused since commit
9dfd7c7a.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Fri, 28 May 2010 13:38:42 +0000 (15:38 +0200)]
blockdev: Belatedly remove MAX_DRIVES
Unused since commit
751c6a17.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 28 May 2010 18:10:48 +0000 (20:10 +0200)]
qemu-io: Fix error messages
The truncate and getlength commands passed a negative error number to strerror.
They also happen to be the two functions that are lacking a newline at the end
of their error message.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Thu, 27 May 2010 14:20:33 +0000 (16:20 +0200)]
Cleanup: virtio-blk.c: Be more consistent using BDRV_SECTOR_SIZE instead
Clean up virtio-blk.c to be more consistent using BDRV_SECTOR_SIZE
instead of hard coded 512 values.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Thu, 27 May 2010 14:20:32 +0000 (16:20 +0200)]
Cleanup: raw-posix.c: Be more consistent using BDRV_SECTOR_SIZE instead of 512
Clean up raw-posix.c to be more consistent using BDRV_SECTOR_SIZE
instead of hard coded 512 values.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Thu, 27 May 2010 14:20:31 +0000 (16:20 +0200)]
Cleanup: Be consistent and use BDRV_SECTOR_SIZE instead of 512
Clean up block.c and use BDRV_SECTOR_SIZE rather than hard coded
numbers (512) when referring to sector size throughout the code.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Thu, 27 May 2010 14:20:30 +0000 (16:20 +0200)]
Cleanup: bdrv_open() no need to shift total_size just to shift back.
In bdrv_open() there is no need to shift total_size >> 9 just to
multiply it by 512 again just a few lines later, since this is the
only place the variable is used.
Mask with BDRV_SECTOR_MASK to protect against case where we are
passed a corrupted image.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Anthony Liguori [Thu, 3 Jun 2010 19:55:49 +0000 (14:55 -0500)]
Merge remote branch 'kwolf/for-anthony' into staging
Anthony Liguori [Wed, 2 Jun 2010 19:55:25 +0000 (14:55 -0500)]
migration: respect exit status with exec:
This patch makes sure that if the exec: process exits with a non-zero return
status, we treat the migration as failed.
This fixes https://bugs.launchpad.net/qemu/+bug/391879
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Aurelien Jarno [Wed, 2 Jun 2010 22:02:30 +0000 (00:02 +0200)]
tcg-i386: fix a typo
Fix a typo introduced by
c28b14c694d759f39fe3ae4f8d03b567da5b93f8.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 1 Jun 2010 11:55:18 +0000 (13:55 +0200)]
tcg-i386: declare tcg_out_tlb_load() inline
Declare tcg_out_tlb_load() inline so that we don't loose optimisations
with commit
8516a04467cb7954cdc32e8b79b4b7df56dccb16.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Richard Henderson [Fri, 21 May 2010 16:03:04 +0000 (09:03 -0700)]
tcg-i386: Remove some ifdefs in qemu_ld/st.
Tidy some code by replacing ifdefs by C ifs.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Richard Henderson [Fri, 21 May 2010 16:03:03 +0000 (09:03 -0700)]
tcg-i386: Split out tlb load function.
Share some code between qemu_ld and qemu_st.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Richard Henderson [Fri, 21 May 2010 16:03:02 +0000 (09:03 -0700)]
tcg-i386: Swap order of TLB hit and miss paths.
Make fallthru be TLB hit and branch be TLB miss. Doing this
both improves branch prediction and will allow further cleanup.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Richard Henderson [Fri, 21 May 2010 16:03:01 +0000 (09:03 -0700)]
tcg-i386: Split out TLB Hit path from qemu_ld/st.
Splitting out these functions will allow further cleanups.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Richard Henderson [Fri, 21 May 2010 16:03:00 +0000 (09:03 -0700)]
tcg-i386: Tidy data16 prefixes.
Include it in the opcode as an extension, as with P_EXT
or the REX bits in the x86-64 port.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Igor V. Kovalenko [Tue, 1 Jun 2010 20:12:58 +0000 (00:12 +0400)]
sparc64: fix umul and smul insns
- truncate and sign or zero extend operands before multiplication
- factor out common code to gen_op_multiply() with parameter to sign/zero extend
- call gen_op_multiply from gen_op_umul and gen_op_smul
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Igor V. Kovalenko [Tue, 1 Jun 2010 20:12:53 +0000 (00:12 +0400)]
sparc64: fix udiv and sdiv insns
- truncate second operand to 32bit
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Igor V. Kovalenko [Tue, 1 Jun 2010 20:12:48 +0000 (00:12 +0400)]
sparc64: improve ldf and stf insns
- implemented block load/store primary/secondary with user privilege
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Igor V. Kovalenko [Wed, 2 Jun 2010 19:39:09 +0000 (23:39 +0400)]
sparc64: use symbolic name for MMU index v1
- use symbolic name for MMU index
v0->v1:
- change debug traces to DPRINTF_MMU
- fix debug trace function names
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Igor V. Kovalenko [Tue, 1 Jun 2010 20:12:37 +0000 (00:12 +0400)]
sparc64: fix ldxfsr insn
- rearrange code to break from switch when appropriate
- allow deprecated ldfsr insn
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Igor V. Kovalenko [Tue, 1 Jun 2010 20:12:32 +0000 (00:12 +0400)]
sparc64: fix 32bit load sign extension
- change return type of ldl_* to uint32_t to prevent unwanted sign extension
visible in sparc64 load alternate address space methods
- note this change makes ldl_* softmmu implementations match ldl_phys one
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Igor V. Kovalenko [Wed, 2 Jun 2010 19:38:45 +0000 (23:38 +0400)]
sparc64: fix missing address masking v1
- address masking for ldqf and stqf insns
- address masking for lddf and stdf insns
- address masking for translating ASI (Ultrasparc IIi)
v0->v1:
- move arch-specific code to helpers and drop more ifdefs at call sites
using new helper asi_address_mask()
- change user emulation to use asi_address_mask()
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Igor V. Kovalenko [Tue, 1 Jun 2010 20:12:22 +0000 (00:12 +0400)]
sparc64: fix tag access register on mmu traps
- set mmu tag access register on FAULT and PROT traps as well
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Corentin Chary [Tue, 1 Jun 2010 21:05:44 +0000 (23:05 +0200)]
vnc: add missing target for vnc-encodings-*.o
vnc-encodings-*.c dependencies where missing.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Corentin Chary [Tue, 1 Jun 2010 21:05:43 +0000 (23:05 +0200)]
vnc: tight: don't forget the third color
While couting color, if the third color was only present one
time it wasn't added to the palette.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Corentin Chary [Tue, 1 Jun 2010 21:05:42 +0000 (23:05 +0200)]
vnc: tight: don't forget last pixel in tight_encode_indexed_rect
A simple patch would have been to just remove count -= 1, but this
one also replace the while (count--) with a for(i = 0; i < count; i++)
which I believe is more easy to understand.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Mon, 31 May 2010 17:43:32 +0000 (14:43 -0300)]
Monitor: Drop QMP documentation from code
Previous commit added QMP documentation to the qemu-monitor.hx
file, it's is a copy of this information.
While it's good to keep it near code, maintaining two copies of
the same information is too hard and has little benefit as we
don't expect client writers to consult the code to find how to
use a QMP command.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Mon, 31 May 2010 17:43:31 +0000 (14:43 -0300)]
QMP: Introduce commands documentation
One of the most important missing feature in QMP today is its
supported commands documentation.
The plan is to make it part of self-description support, however
self-description is a big task we have been postponing for a
long time now and still don't know when it's going to be done.
In order not to compromise QMP adoption and make users' life easier,
this commit adds a simple text documentation which fully describes
all QMP supported commands.
This is not ideal for a number of reasons (harder to maintain,
text-only, etc) but does improve the current situation. To avoid at
least divering from the user monitor help and texi snippets, QMP bits
are also maintained inside qemu-monitor.hx, and hxtool is extended to
generate a single text file from them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Mon, 31 May 2010 17:43:30 +0000 (14:43 -0300)]
monitor: Reorder info documentation
Push the doc fragments for the info command to the end of
qemu-monitor.hx. This helps to establish a proper layout in the upcoming
QMP documentation.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Tue, 1 Jun 2010 18:34:20 +0000 (13:34 -0500)]
Merge remote branch 'mst/for_anthony' into HEAD
Gerd Hoffmann [Tue, 25 May 2010 16:25:20 +0000 (18:25 +0200)]
vnc: move size-changed check into the vnc_desktop_resize function.
This make sure we send a desktop resize message only in case we actually
have to, using the new variables which track the clients desktop size.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Tue, 25 May 2010 16:25:19 +0000 (18:25 +0200)]
vnc: don't send invalid screen updates.
Don't send updates for screen areas which are outside the clients
desktop. May happed with vnc clients which don't support the desktop
resize message.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Tue, 25 May 2010 16:25:18 +0000 (18:25 +0200)]
vnc: keep track of client desktop size
Add two new variables to keep track of the vnc clients desktop size.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Tue, 25 May 2010 16:25:17 +0000 (18:25 +0200)]
vnc: send desktopresize event as reply to set encodings
In case the desktop did resize while the vnc connection setup was still
in progress the client isn't informed about it. Send a desktop resize
event as soon as the client told us it can handle deskop resize via set
encodings message to make sure the client us up to date.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Tue, 25 May 2010 16:25:16 +0000 (18:25 +0200)]
vnc: factor out vnc_desktop_resize()
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Fri, 21 May 2010 09:59:14 +0000 (11:59 +0200)]
Add support for depth 15 to qemu_default_pixelformat()
Makes qemu_default_pixelformat(15) return pixelformat filled for 15 bit
color depth (16 bpp, 5 bits for red,green,blue each, 1 bit unused).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Thu, 20 May 2010 13:23:06 +0000 (15:23 +0200)]
check for active_console before using it
Other vga_hw_* functions do the same.
Fixes a segmentation fault. Trigger: boot with -nodefaults,
then connect via vnc.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Thu, 20 May 2010 07:18:52 +0000 (09:18 +0200)]
Add dependency of JSON unit tests on config-host.h
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Pierre Riteau [Wed, 12 May 2010 13:12:44 +0000 (15:12 +0200)]
migration: Fix calculation of bytes_transferred
When a page with all identical bytes is transferred, it is counted
as a full page (TARGET_PAGE_SIZE) although only one byte is actually
sent. Fix this by changing ram_save_block() to return the number of
bytes sent instead of a boolean value. This makes bandwidth
estimation, and consequently downtime estimation, more precise.
Signed-off-by: Pierre Riteau <Pierre.Riteau@irisa.fr>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Alon Levy [Wed, 19 May 2010 09:31:38 +0000 (15:01 +0530)]
virtio-serial-bus: fix ports_map allocation on init
Fix for too small allocation to ports_map
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Andre Przywara [Fri, 21 May 2010 07:50:51 +0000 (09:50 +0200)]
resent: x86/cpuid: Add kvm32 CPU model
Create a kvm32 CPU model that describes a least common denominator
for KVM capable guest CPUs. Useful for migration purposes.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Corentin Chary [Wed, 19 May 2010 07:24:12 +0000 (09:24 +0200)]
vnc: tight: add palette encoding
Add palette tight encoding. Palette encoding will try to count the number
of colors for a given rectangle, and if this number is low enough
(< 256) it will send the palette + the rectangle with indexed colors.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Corentin Chary [Wed, 19 May 2010 07:24:11 +0000 (09:24 +0200)]
vnc: add support for tight fill encoding
Fill encoding detects rectangles using only one color and send only
one pixel value.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Corentin Chary [Wed, 19 May 2010 07:24:10 +0000 (09:24 +0200)]
vnc: add basic tight support
Add support for tight encoding [1]. This patch only add support
for "basic" tight compression without any filter.
[1] http://tigervnc.org/cgi-bin/rfbproto#tight-encoding.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Corentin Chary [Wed, 19 May 2010 07:24:09 +0000 (09:24 +0200)]
vnc: return the number of rectangles
Some encodings like tight supports tiling (spliting in
multiple sub-rectangles). So we needed a way to tell
vnc_update_client() how much rectangles are in the buffer.
zlib, raw and hextile always send a full rectangle.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Corentin Chary [Wed, 19 May 2010 07:24:08 +0000 (09:24 +0200)]
vnc: remove a memory leak in zlib
Makes sure we free all ressources used in zlib encoding (zlib stream
and buffer).
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Corentin Chary [Wed, 19 May 2010 07:24:07 +0000 (09:24 +0200)]
vnc: add buffer_free()
Add a buffer_free() helper to free vnc buffers and
remove some duplicated code in vnc_disconnect_finish().
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Corentin Chary [Wed, 19 May 2010 07:24:06 +0000 (09:24 +0200)]
vnc: don't clear zlib stream on set_encoding
On init, values are already NULL, but we shouldn't try
to reset them each time a client send a set encoding
command because this break everything. For example,
libvncclient re-send a set encoding command if the
framebuffer is resized.
This fix framebuffer resizing for zlib encoding.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Corentin Chary [Wed, 19 May 2010 07:24:05 +0000 (09:24 +0200)]
vnc: adjust compression zstream level
Adjust zlib compression level if needed by calling deflateParams.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Corentin Chary [Wed, 19 May 2010 07:24:04 +0000 (09:24 +0200)]
vnc: only use a single zlib stream
According to http://tigervnc.org/cgi-bin/rfbproto#zlib-encoding
zlib encoding only uses a single stream. Current implementation defines
4 streams but only uses the first one. Remove them and only use a single
stream.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Corentin Chary [Wed, 19 May 2010 07:24:03 +0000 (09:24 +0200)]
vnc: really call zlib if we want zlib
send_framebuffer_update() was calling hextile instead of zlib
since commit
70a4568fe0c5a64adaa3da5030b7109e5199e692.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Corentin Chary [Wed, 19 May 2010 07:24:02 +0000 (09:24 +0200)]
vnc: explain why set_encodings loop is reversed
Add a small comment to explain why we need to start from
the end of the array to set the right prefered encoding.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Corentin Chary [Wed, 19 May 2010 07:24:01 +0000 (09:24 +0200)]
Revert "vnc: set the right prefered encoding"
This patch was wrong, because the loop was already reversed,
so the first encoding was correctly set at the end of the loopp.
This reverts commit
14eb8b6829ad9dee7035de729e083844a425f274.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Blue Swirl [Mon, 31 May 2010 18:59:45 +0000 (18:59 +0000)]
ioapic: improve debugging
Add a DPRINTF macro, use it also to see irq deliveries.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Alexander Graf [Tue, 11 May 2010 15:38:17 +0000 (17:38 +0200)]
Fix leul_to_cpu on big endian hosts
Commit
213acd2e introduced leul_to_cpu with a special code path for big endian
hosts. Unfortunately that code used preprocessor magic that didn't work.
This patch replaces the explicit ##s by glue() which is proven to work reliably,
enabling me to compile qemu on ppc again.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Lars Munch [Sat, 8 May 2010 20:43:35 +0000 (22:43 +0200)]
arm: fix arm kernel boot for non zero start addr
Booting an arm kernel has been broken a while when booting from non zero start
address. This is due to the order of events: board init loads the kernel and
sets register 15 to the start address and then qemu_system_reset reset the cpu
making register 15 zero again.
This patch fixes the usage of the register 15 start address trick in
combination with arm_load_kernel.
Signed-off-by: Lars Munch <lars@segv.dk>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Thomas Monjalon [Fri, 28 May 2010 19:00:45 +0000 (21:00 +0200)]
target-ppc: remove useless line
This line was a bit clear.
The next lines set or reset this bit (LE) depending of another bit (ILE).
So the first line is useless.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Thomas Monjalon [Fri, 28 May 2010 19:07:32 +0000 (21:07 +0200)]
target-ppc: fix RFI by clearing some bits of MSR
Since commit
2ada0ed, "Return From Interrupt" is broken for PPC processors
because some interrupt specifics bits of SRR1 are copied to MSR.
SRR1 is a save of MSR during interrupt.
During RFI, MSR must be restored from SRR1.
But some bits of SRR1 are interrupt-specific and are not used for MSR saving.
This is the specification (ISA 2.06) at chapter 6.4.3 (Interrupt Processing):
"2. Bits 33:36 and 42:47 of SRR1 or HSRR1 are loaded with information specific
to the interrupt type.
3. Bits 0:32, 37:41, and 48:63 of SRR1 or HSRR1 are loaded with a copy of the
corresponding bits of the MSR."
Below is a representation of MSR bits which are not saved:
0:15 16:31 32 33:36 37:41 42:47 48:63
——— | ——— | — X X X X — — — — — X X X X X X | ————
0000 0000 | 7 | 8 | 3 | F | 0000
History:
In the initial Qemu implementation (
e1833e1), the mask 0x783F0000 was used for
saving MSR in SRR1. But all the bits 32:47 were cleared during RFI restoring.
This was wrong. The commit
2ada0ed explains that this breaks Altivec.
Indeed, bit 38 (for Altivec support) must be saved and restored.
The change of
2ada0ed was to restore all the bits of SRR1 to MSR.
But it's also wrong.
Explanation:
As an example, let's see what's happening after a TLB miss.
According to the e300 manual (E300CORERM table 5-6), the TLB miss interrupts
set the bits 44-47 for KEY, I/D, WAY and S/L. These bits are specifics to the
interrupt and must not be copied into MSR at the end of the interrupt.
With the current implementation, a TLB miss overwrite bits POW, TGPR and ILE.
Fix:
It shouldn't be needed to filter-out bits on MSR saving when interrupt occurs.
Specific bits overwrite MSR ones in SRR1.
But at the end of interrupt (RFI), specifics bits must be cleared before
restoring MSR from SRR1. The mask 0x783F0000 apply here.
Discussion:
The bits of the mask 0x783F0000 are cleared after an interrupt.
I cannot find a specification which talks about this
but I assume it is the truth since Linux can run this way.
Maybe it's not perfect but it's better (works for e300).
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Isaku Yamahata [Fri, 28 May 2010 09:30:46 +0000 (18:30 +0900)]
pci-hotplug: make them aware of pci domain.
add helper function which converts root bus to pci domain.
make them aware of pci domain.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Isaku Yamahata [Thu, 27 May 2010 05:40:37 +0000 (14:40 +0900)]
msix: remove duplicated defines.
remove defines which are already defined in pci_regs.h
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Isaku Yamahata [Thu, 27 May 2010 05:40:02 +0000 (14:40 +0900)]
pci.h: remove unused constants.
So remove unused constants,
PCI_STATUS_RESERVED_MASK_LO, PCI_STATUS_RESERVED_MASK_HI,
PCI_COMMAND_RESERVED, PCI_COMMAND_RESERVED_MASK_HI.
They were used once, but they aren't used anymore.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Isaku Yamahata [Thu, 27 May 2010 05:42:37 +0000 (14:42 +0900)]
pci: add const to pci_is_express(), pci_config_size().
add const to pci_is_express(), pci_config_size().
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Isaku Yamahata [Thu, 27 May 2010 05:42:06 +0000 (14:42 +0900)]
pci: clean up of pci_set_default_subsystem_id().
Use pci accessor function.
don't return value because it always return 0 and
the caller doesn't check the return value.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Blue Swirl [Sun, 30 May 2010 19:20:07 +0000 (19:20 +0000)]
mc146818rtc: improve debugging
Add a separate flag for debugging coalesced interrupts.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Artyom Tarasenko [Sat, 29 May 2010 20:48:25 +0000 (22:48 +0200)]
sparc32 SuperSPARC MMU Breakpoint Action register (SS-20 OBP fix)
SuperSPARC MMU Breakpoint Action register is used by OBP at boot
The patch allows booting Solaris and some other OS with
SPARCStation-20 OBP.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 29 May 2010 20:23:49 +0000 (20:23 +0000)]
pc: improve debugging
Add a DPRINTF macro and use it for ISA and PIC interrupts.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 29 May 2010 20:23:48 +0000 (20:23 +0000)]
apic: improve debugging
Add a DPRINTF macro. Use TARGET_FMT_plx for printing target_phys_addr_t
items. Add a separate flag for debugging coalescing interrupts.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 29 May 2010 20:23:19 +0000 (20:23 +0000)]
i8259: improve debugging
Add a DPRINTF macro.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 29 May 2010 10:20:44 +0000 (10:20 +0000)]
sparc64: fix user emulator build
Accesses with _nucleus prefix are not available when building user
emulators:
CC sparc64-linux-user/op_helper.o
cc1: warnings being treated as errors
/src/qemu/target-sparc/op_helper.c: In function 'helper_ldda_asi':
/src/qemu/target-sparc/op_helper.c:3063: error: implicit declaration of function 'ldq_nucleus'
Avoid making such accesses. Fixes breakage by
54a3c0f032abf93d1cedc75456af75401ac10360.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Artyom Tarasenko [Sat, 8 May 2010 14:10:14 +0000 (16:10 +0200)]
Pad iommu with an empty slot (necessary for SunOS 4.1.4)
On the real hardware (SS-5, LX) the MMU is not padded, but aliased.
Software shouldn't use aliased addresses, neither should it crash
when it uses (on the real hardware it wouldn't). Using empty_slot
instead of aliasing can help with debugging such accesses.
Signed-off-by: Artyom Tarasenko <atar4qemu@googlemail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Igor V. Kovalenko [Fri, 28 May 2010 21:05:46 +0000 (01:05 +0400)]
sparc64: fix 128-bit atomic load from nucleus context v1
- change 128-bit atomic loads to reference nucleus context
v0->v1: dropped disassembler change
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Paul Brook [Sat, 29 May 2010 01:27:35 +0000 (02:27 +0100)]
Pre-allocate guest address space
Allow pre-allocation of the guest virtual address space in usermode emulation.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Richard Henderson [Fri, 21 May 2010 17:03:33 +0000 (10:03 -0700)]
alpha-linux-user: Fill in SI_CODE for SIGSEGV.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Richard Henderson [Fri, 21 May 2010 17:37:52 +0000 (10:37 -0700)]
linux-user: Use qemu-malloc.c.
Since we're no longer setting PAGE_RESERVED, there's no need to
implement qemu_malloc via mmap.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Richard Henderson [Fri, 21 May 2010 17:37:51 +0000 (10:37 -0700)]
Use calloc in qemu_mallocz.
Avoids the memset if the allocator has gotten new zeroed
storage from the operating system.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Riccardo Magliocchetti [Wed, 19 May 2010 19:49:21 +0000 (21:49 +0200)]
linux-user: Fix compilation with DEBUG defined
Signed-off-by: Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Riccardo Magliocchetti [Wed, 19 May 2010 16:49:30 +0000 (18:49 +0200)]
Fix hw/gt64xxx.c compilation with DEBUG defined
Use TARGET_FMT_plx as format placeholder for target_phys_addr_t
Signed-off-by: Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Riccardo Magliocchetti [Wed, 19 May 2010 16:49:28 +0000 (18:49 +0200)]
Fix typo in balloon help
Fix launchpad #563883
Signed-off-by: Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Jan Kiszka [Thu, 13 May 2010 13:09:58 +0000 (15:09 +0200)]
musicpal: Drop redundant reset call
Reset is now triggered after init, no need for explicit calls anymore.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Stefan Hajnoczi [Wed, 12 May 2010 14:10:56 +0000 (15:10 +0100)]
doc: Update monitor info subcommands
The "info blockstats" documentation was copy-pasted as "info block"
instead of "info blockstats". The documentation for "commands", "jit",
"numa", "qdm", and "roms" is missing. This patch resolves these issues
in qemu-monitor.hx.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>