OSDN Git Service
Marek Majtyka [Wed, 1 Feb 2023 10:24:18 +0000 (11:24 +0100)]
drivers: net: turn on XDP features
A summary of the flags being set for various drivers is given below.
Note that XDP_F_REDIRECT_TARGET and XDP_F_FRAG_TARGET are features
that can be turned off and on at runtime. This means that these flags
may be set and unset under RTNL lock protection by the driver. Hence,
READ_ONCE must be used by code loading the flag value.
Also, these flags are not used for synchronization against the availability
of XDP resources on a device. It is merely a hint, and hence the read
may race with the actual teardown of XDP resources on the device. This
may change in the future, e.g. operations taking a reference on the XDP
resources of the driver, and in turn inhibiting turning off this flag.
However, for now, it can only be used as a hint to check whether device
supports becoming a redirection target.
Turn 'hw-offload' feature flag on for:
- netronome (nfp)
- netdevsim.
Turn 'native' and 'zerocopy' features flags on for:
- intel (i40e, ice, ixgbe, igc)
- mellanox (mlx5).
- stmmac
- netronome (nfp)
Turn 'native' features flags on for:
- amazon (ena)
- broadcom (bnxt)
- freescale (dpaa, dpaa2, enetc)
- funeth
- intel (igb)
- marvell (mvneta, mvpp2, octeontx2)
- mellanox (mlx4)
- mtk_eth_soc
- qlogic (qede)
- sfc
- socionext (netsec)
- ti (cpsw)
- tap
- tsnep
- veth
- xen
- virtio_net.
Turn 'basic' (tx, pass, aborted and drop) features flags on for:
- netronome (nfp)
- cavium (thunder)
- hyperv.
Turn 'redirect_target' feature flag on for:
- amanzon (ena)
- broadcom (bnxt)
- freescale (dpaa, dpaa2)
- intel (i40e, ice, igb, ixgbe)
- ti (cpsw)
- marvell (mvneta, mvpp2)
- sfc
- socionext (netsec)
- qlogic (qede)
- mellanox (mlx5)
- tap
- veth
- virtio_net
- xen
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Marek Majtyka <alardam@gmail.com>
Link: https://lore.kernel.org/r/3eca9fafb308462f7edb1f58e451d59209aa07eb.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jakub Kicinski [Wed, 1 Feb 2023 10:24:17 +0000 (11:24 +0100)]
netdev-genl: create a simple family for netdev stuff
Add a Netlink spec-compatible family for netdevs.
This is a very simple implementation without much
thought going into it.
It allows us to reap all the benefits of Netlink specs,
one can use the generic client to issue the commands:
$ ./cli.py --spec netdev.yaml --dump dev_get
[{'ifindex': 1, 'xdp-features': set()},
{'ifindex': 2, 'xdp-features': {'basic', 'ndo-xmit', 'redirect'}},
{'ifindex': 3, 'xdp-features': {'rx-sg'}}]
the generic python library does not have flags-by-name
support, yet, but we also don't have to carry strings
in the messages, as user space can get the names from
the spec.
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Co-developed-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/327ad9c9868becbe1e601b580c962549c8cd81f2.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tiezhu Yang [Thu, 2 Feb 2023 06:31:26 +0000 (14:31 +0800)]
selftests/bpf: Use semicolon instead of comma in test_verifier.c
Just silence the following checkpatch warning:
WARNING: Possible comma where semicolon could be used
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1675319486-27744-3-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tiezhu Yang [Thu, 2 Feb 2023 06:31:25 +0000 (14:31 +0800)]
tools/bpf: Use tab instead of white spaces to sync bpf.h
Just silence the following build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1675319486-27744-2-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tobias Klauser [Thu, 2 Feb 2023 14:19:21 +0000 (15:19 +0100)]
bpf: Drop always true do_idr_lock parameter to bpf_map_free_id
The do_idr_lock parameter to bpf_map_free_id was introduced by commit
bd5f5f4ecb78 ("bpf: Add BPF_MAP_GET_FD_BY_ID"). However, all callers set
do_idr_lock = true since commit
1e0bd5a091e5 ("bpf: Switch bpf_map ref
counter to atomic64_t so bpf_map_inc() never fails").
While at it also inline __bpf_map_put into its only caller bpf_map_put
now that do_idr_lock can be dropped from its signature.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20230202141921.4424-1-tklauser@distanz.ch
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov [Fri, 3 Feb 2023 04:21:59 +0000 (20:21 -0800)]
Merge branch ' docs/bpf: Add description of register liveness tracking algorithm'
Eduard Zingerman says:
====================
An overview of the register tracking liveness algorithm.
Previous versions posted here: [1], [2], [3].
- Changes from RFC to v2 (suggested by Andrii Nakryiko):
- wording corrected to use term "stack slot" instead of "stack spill";
- parentage chain diagram updated to show nil links for frame #1;
- added example for non-BPF_DW writes behavior;
- explanation in "Read marks propagation for cache hits" is reworked.
- Changes from v2 to v3:
- lot's of grammatical / wording fixes as suggested by David Vernet;
- "Register parentage chains" section is fixed to reflect what
happens to r1-r5 when function call is processed (as suggested by David and Alexei);
- Example in "Liveness marks tracking" section updated to explain
why partial writes should not lead to REG_LIVE_WRITTEN marks
(suggested by David);
- "Read marks propagation for cache hits" section updates:
- Explanation updated to hint why read marks should be propagated
before jumping to example (suggested by David);
- Removed box around B/D in the diagram updated (suggested by Alexei).
- Changes from v3 to v4 (suggested by Edward Cree):
- register parentage chain diagram updated to explain why r6 mark is
not propagated;
- read mark propagation algorithm pseudo-code fixed to correctly
show "if state->live & REG_LIVE_WRITTEN" stop condition;
- general wording improvements in section "Liveness marks tracking".
[1] https://lore.kernel.org/bpf/
20230124220343.
2942203-1-eddyz87@gmail.com/
[2] https://lore.kernel.org/bpf/
20230130182400.630997-1-eddyz87@gmail.com/
[3] https://lore.kernel.org/bpf/
20230131181118.733845-1-eddyz87@gmail.com/
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Eduard Zingerman [Thu, 2 Feb 2023 12:57:13 +0000 (14:57 +0200)]
docs/bpf: Add description of register liveness tracking algorithm
This is a followup for [1], adds an overview for the register liveness
tracking, covers the following points:
- why register liveness tracking is useful;
- how register parentage chains are constructed;
- how liveness marks are applied using the parentage chains.
[1] https://lore.kernel.org/bpf/CAADnVQKs2i1iuZ5SUGuJtxWVfGYR9kDgYKhq3rNV+kBLQCu7rA@mail.gmail.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230202125713.821931-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Thu, 2 Feb 2023 23:53:35 +0000 (00:53 +0100)]
selftests/bpf: Initialize tc in xdp_synproxy
xdp_synproxy/xdp fails in CI with:
Error: bpf_tc_hook_create: File exists
The XDP version of the test should not be calling bpf_tc_hook_create();
the reason it's happening anyway is that if we don't specify --tc on the
command line, tc variable remains uninitialized.
Fixes:
784d5dc0efc2 ("selftests/bpf: Add selftests for raw syncookie helpers in TC mode")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Reported-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230202235335.3403781-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ye Xingchen [Tue, 31 Jan 2023 06:40:51 +0000 (14:40 +0800)]
selftests/bpf: Remove duplicate include header in xdp_hw_metadata
The linux/net_tstamp.h is included more than once, thus clean it up.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/202301311440516312161@zte.com.cn
Stanislav Fomichev [Wed, 1 Feb 2023 23:36:40 +0000 (15:36 -0800)]
selftests/bpf: Don't refill on completion in xdp_metadata
We only need to consume TX completion instead of refilling 'fill' ring.
It's currently not an issue because we never RX more than 8 packets.
Fixes:
e2a46d54d7a1 ("selftests/bpf: Verify xdp_metadata xdp->af_xdp path")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230201233640.367646-1-sdf@google.com
Jesper Dangaard Brouer [Wed, 1 Feb 2023 17:32:05 +0000 (18:32 +0100)]
selftests/bpf: xdp_hw_metadata use strncpy for ifname
The ifname char pointer is taken directly from the command line
as input and the string is copied directly into struct ifreq
via strcpy. This makes it easy to corrupt other members of ifreq
and generally do stack overflows.
Most often the ioctl will fail with:
./xdp_hw_metadata: ioctl(SIOCETHTOOL): Bad address
As people will likely copy-paste code for getting NIC queue
channels (rxq_num) and enabling HW timestamping (hwtstamp_ioctl)
lets make this code a bit more secure by using strncpy.
Fixes:
297a3f124155 ("selftests/bpf: Simple program to dump XDP RX metadata")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/167527272543.937063.16993147790832546209.stgit@firesoul
Jesper Dangaard Brouer [Wed, 1 Feb 2023 17:32:00 +0000 (18:32 +0100)]
selftests/bpf: xdp_hw_metadata correct status value in error(3)
The glibc error reporting function error():
void error(int status, int errnum, const char *format, ...);
The status argument should be a positive value between 0-255 as it
is passed over to the exit(3) function as the value as the shell exit
status. The least significant byte of status (i.e., status & 0xFF) is
returned to the shell parent.
Fix this by using 1 instead of -1. As 1 corresponds to C standard
constant EXIT_FAILURE.
Fixes:
297a3f124155 ("selftests/bpf: Simple program to dump XDP RX metadata")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/167527272038.937063.9137108142012298120.stgit@firesoul
Jesper Dangaard Brouer [Wed, 1 Feb 2023 17:31:55 +0000 (18:31 +0100)]
selftests/bpf: xdp_hw_metadata cleanup cause segfault
Using xdp_hw_metadata I experince Segmentation fault after seeing
"detaching bpf program....".
On my system the segfault happened when accessing bpf_obj->skeleton
in xdp_hw_metadata__destroy(bpf_obj) call. That doesn't make any sense
as this memory have not been freed by program at this point in time.
Prior to calling xdp_hw_metadata__destroy(bpf_obj) the function
close_xsk() is called for each RX-queue xsk. The real bug lays
in close_xsk() that unmap via munmap() the wrong memory pointer.
The call xsk_umem__delete(xsk->umem) will free xsk->umem, thus
the call to munmap(xsk->umem, UMEM_SIZE) will have unpredictable
behavior. And man page explain subsequent references to these
pages will generate SIGSEGV.
Unmapping xsk->umem_area instead removes the segfault.
Fixes:
297a3f124155 ("selftests/bpf: Simple program to dump XDP RX metadata")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/167527271533.937063.5717065138099679142.stgit@firesoul
Jesper Dangaard Brouer [Wed, 1 Feb 2023 17:31:50 +0000 (18:31 +0100)]
selftests/bpf: xdp_hw_metadata clear metadata when -EOPNOTSUPP
The AF_XDP userspace part of xdp_hw_metadata see non-zero as a signal of
the availability of rx_timestamp and rx_hash in data_meta area. The
kernel-side BPF-prog code doesn't initialize these members when kernel
returns an error e.g. -EOPNOTSUPP. This memory area is not guaranteed to
be zeroed, and can contain garbage/previous values, which will be read
and interpreted by AF_XDP userspace side.
Tested this on different drivers. The experiences are that for most
packets they will have zeroed this data_meta area, but occasionally it
will contain garbage data.
Example of failure tested on ixgbe:
poll: 1 (0)
xsk_ring_cons__peek: 1
0x18ec788: rx_desc[0]->addr=
100000000008000 addr=8100 comp_addr=8000
rx_hash:
3697961069
rx_timestamp:
9024981991734834796 (sec:
9024981991.7348)
0x18ec788: complete idx=8 addr=8000
Converting to date:
date -d @
9024981991
2255-12-28T20:26:31 CET
I choose a simple fix in this patch. When kfunc fails or isn't supported
assign zero to the corresponding struct meta value.
It's up to the individual BPF-programmer to do something smarter e.g.
that fits their use-case, like getting a software timestamp and marking
a flag that gives the type of timestamp.
Fixes:
297a3f124155 ("selftests/bpf: Simple program to dump XDP RX metadata")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/167527271027.937063.5177725618616476592.stgit@firesoul
Jesper Dangaard Brouer [Wed, 1 Feb 2023 18:12:54 +0000 (19:12 +0100)]
selftests/bpf: Fix unmap bug in prog_tests/xdp_metadata.c
The function close_xsk() unmap via munmap() the wrong memory pointer.
The call xsk_umem__delete(xsk->umem) have already freed xsk->umem.
Thus the call to munmap(xsk->umem, UMEM_SIZE) will have unpredictable
behavior that can lead to Segmentation fault elsewhere, as man page
explain subsequent references to these pages will generate SIGSEGV.
Fixes:
e2a46d54d7a1 ("selftests/bpf: Verify xdp_metadata xdp->af_xdp path")
Reported-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/167527517464.938135.13750760520577765269.stgit@firesoul
Daniel Borkmann [Wed, 1 Feb 2023 23:25:14 +0000 (00:25 +0100)]
Merge branch 'kfunc-annotation'
David Vernet says:
====================
This is v3 of the patchset [0]. v2 can be found at [1].
[0]: https://lore.kernel.org/bpf/Y7kCsjBZ%2FFrsWW%2Fe@maniforge.lan/T/
[1]: https://lore.kernel.org/lkml/
20230123171506.71995-1-void@manifault.com/
Changelog:
----------
v2 -> v3:
- Go back to the __bpf_kfunc approach from v1. The BPF_KFUNC macro
received pushback as it didn't match the more typical EXPORT_SYMBOL*
APIs used elsewhere in the kernel. It's the longer term plan, but for
now we're proposing something less controversial to fix kfuncs and BTF
encoding.
- Add __bpf_kfunc macro to newly added cpumask kfuncs.
- Add __bpf_kfunc macro to newly added XDP metadata kfuncs, which were
failing to be BTF encoded in the thread in [2].
- Update patch description(s) to reference the discussions in [2].
- Add a selftest that validates that a static kfunc with unused args is
properly BTF encoded and can be invoked.
[2]: https://lore.kernel.org/all/
fe5d42d1-faad-d05e-99ad-
1c2c04776950@oracle.com/
v1 -> v2:
- Wrap entire function signature in BPF_KFUNC macro instead of using
__bpf_kfunc tag (Kumar)
- Update all kfunc definitions to use this macro.
- Update kfuncs.rst documentation to describe and illustrate the macro.
- Also clean up a few small parts of kfuncs.rst, e.g. some grammar, and
in general making it a bit tighter.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
David Vernet [Wed, 1 Feb 2023 17:30:16 +0000 (11:30 -0600)]
selftests/bpf: Add testcase for static kfunc with unused arg
kfuncs are allowed to be static, or not use one or more of their
arguments. For example, bpf_xdp_metadata_rx_hash() in net/core/xdp.c is
meant to be implemented by drivers, with the default implementation just
returning -EOPNOTSUPP. As described in [0], such kfuncs can have their
arguments elided, which can cause BTF encoding to be skipped. The new
__bpf_kfunc macro should address this, and this patch adds a selftest
which verifies that a static kfunc with at least one unused argument can
still be encoded and invoked by a BPF program.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230201173016.342758-5-void@manifault.com
David Vernet [Wed, 1 Feb 2023 17:30:15 +0000 (11:30 -0600)]
bpf: Add __bpf_kfunc tag to all kfuncs
Now that we have the __bpf_kfunc tag, we should use add it to all
existing kfuncs to ensure that they'll never be elided in LTO builds.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230201173016.342758-4-void@manifault.com
David Vernet [Wed, 1 Feb 2023 17:30:14 +0000 (11:30 -0600)]
bpf: Document usage of the new __bpf_kfunc macro
Now that the __bpf_kfunc macro has been added to linux/btf.h, include a
blurb about it in the kfuncs.rst file. In order for the macro to
successfully render with .. kernel-doc, we'll also need to add it to the
c_id_attributes array.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230201173016.342758-3-void@manifault.com
David Vernet [Wed, 1 Feb 2023 17:30:13 +0000 (11:30 -0600)]
bpf: Add __bpf_kfunc tag for marking kernel functions as kfuncs
kfuncs are functions defined in the kernel, which may be invoked by BPF
programs. They may or may not also be used as regular kernel functions,
implying that they may be static (in which case the compiler could e.g.
inline it away, or elide one or more arguments), or it could have
external linkage, but potentially be elided in an LTO build if a
function is observed to never be used, and is stripped from the final
kernel binary.
This has already resulted in some issues, such as those discussed in [0]
wherein changes in DWARF that identify when a parameter has been
optimized out can break BTF encodings (and in general break the kfunc).
[0]: https://lore.kernel.org/all/
1675088985-20300-2-git-send-email-alan.maguire@oracle.com/
We therefore require some convenience macro that kfunc developers can
use just add to their kfuncs, and which will prevent all of the above
issues from happening. This is in contrast with what we have today,
where some kfunc definitions have "noinline", some have "__used", and
others are static and have neither.
Note that longer term, this mechanism may be replaced by a macro that
more closely resembles EXPORT_SYMBOL_GPL(), as described in [1]. For
now, we're going with this shorter-term approach to fix existing issues
in kfuncs.
[1]: https://lore.kernel.org/lkml/Y9AFT4pTydKh+PD3@maniforge.lan/
Note as well that checkpatch complains about this patch with the
following:
ERROR: Macros with complex values should be enclosed in parentheses
+#define __bpf_kfunc __used noinline
There seems to be a precedent for using this pattern in other places
such as compiler_types.h (see e.g. __randomize_layout and noinstr), so
it seems appropriate.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230201173016.342758-2-void@manifault.com
Daniel Borkmann [Wed, 1 Feb 2023 22:30:27 +0000 (23:30 +0100)]
Merge branch 'xdp-ice-mbuf'
Maciej Fijalkowski says:
====================
Although this work started as an effort to add multi-buffer XDP support
to ice driver, as usual it turned out that some other side stuff needed
to be addressed, so let me give you an overview.
First patch adjusts legacy-rx in a way that it will be possible to refer
to skb_shared_info being at the end of the buffer when gathering up
frame fragments within xdp_buff.
Then, patches 2-9 prepare ice driver in a way that actual multi-buffer
patches will be easier to swallow.
10 and 11 are the meat. What is worth mentioning is that this set
actually *fixes* things as patch 11 removes the logic based on
next_dd/rs and we previously stepped away from this for ice_xmit_zc().
Currently, AF_XDP ZC XDP_TX workload is off as there are two cleaning
sides that can be triggered and two of them work on different internal
logic. This set unifies that and allows us to improve the performance by
2x with a trick on the last (13) patch.
12th is a simple cleanup of no longer fields from Tx ring.
I might be wrong but I have not seen anyone reporting performance impact
among patches that add XDP multi-buffer support to a particular driver.
Numbers below were gathered via xdp_rxq_info and xdp_redirect_map on
1500 MTU:
XDP_DROP +1%
XDP_PASS -1,2%
XDP_TX -0,5%
XDP_REDIRECT -3,3%
Cherry on top, which is not directly related to mbuf support (last
patch):
XDP_TX ZC +126%
Target the we agreed on was to not degrade performance for any action by
anything that would be over 5%, so our goal was met. Basically this set
keeps the performance where it was. Redirect is slower due to more
frequent tail bumps.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Maciej Fijalkowski [Tue, 31 Jan 2023 20:45:06 +0000 (21:45 +0100)]
ice: xsk: Do not convert to buff to frame for XDP_TX
Let us store pointer to xdp_buff that came from xsk_buff_pool on tx_buf
so that it will be possible to recycle it via xsk_buff_free() on Tx
cleaning side. This way it is not necessary to do expensive copy to
another xdp_buff backed by a newly allocated page.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20230131204506.219292-14-maciej.fijalkowski@intel.com
Maciej Fijalkowski [Tue, 31 Jan 2023 20:45:05 +0000 (21:45 +0100)]
ice: Remove next_{dd,rs} fields from ice_tx_ring
Now that both ZC and standard XDP data paths stopped using Tx logic
based on next_dd and next_rs fields, we can safely remove these fields
and shrink Tx ring structure.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20230131204506.219292-13-maciej.fijalkowski@intel.com
Maciej Fijalkowski [Tue, 31 Jan 2023 20:45:04 +0000 (21:45 +0100)]
ice: Add support for XDP multi-buffer on Tx side
Similarly as for Rx side in previous patch, logic on XDP Tx in ice
driver needs to be adjusted for multi-buffer support. Specifically, the
way how HW Tx descriptors are produced and cleaned.
Currently, XDP_TX works on strict ring boundaries, meaning it sets RS
bit (on producer side) / looks up DD bit (on consumer/cleaning side)
every quarter of the ring. It means that if for example multi buffer
frame would span across the ring quarter boundary (say that frame
consists of 4 frames and we start from 62 descriptor where ring is sized
to 256 entries), RS bit would be produced in the middle of multi buffer
frame, which would be a broken behavior as it needs to be set on the
last descriptor of the frame.
To make it work, set RS bit at the last descriptor from the batch of
frames that XDP_TX action was used on and make the first entry remember
the index of last descriptor with RS bit set. This way, cleaning side
can take the index of descriptor with RS bit, look up DD bit's presence
and clean from first entry to last.
In order to clean up the code base introduce the common ice_set_rs_bit()
which will return index of descriptor that got RS bit produced on so
that standard driver can store this within proper ice_tx_buf and ZC
driver can simply ignore return value.
Co-developed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>
Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20230131204506.219292-12-maciej.fijalkowski@intel.com
Maciej Fijalkowski [Tue, 31 Jan 2023 20:45:03 +0000 (21:45 +0100)]
ice: Add support for XDP multi-buffer on Rx side
Ice driver needs to be a bit reworked on Rx data path in order to
support multi-buffer XDP. For skb path, it currently works in a way that
Rx ring carries pointer to skb so if driver didn't manage to combine
fragmented frame at current NAPI instance, it can restore the state on
next instance and keep looking for last fragment (so descriptor with EOP
bit set). What needs to be achieved is that xdp_buff needs to be
combined in such way (linear + frags part) in the first place. Then skb
will be ready to go in case of XDP_PASS or BPF program being not present
on interface. If BPF program is there, it would work on multi-buffer
XDP. At this point xdp_buff resides directly on Rx ring, so given the
fact that skb will be built straight from xdp_buff, there will be no
further need to carry skb on Rx ring.
Besides removing skb pointer from Rx ring, lots of members have been
moved around within ice_rx_ring. First and foremost reason was to place
rx_buf with xdp_buff on the same cacheline. This means that once we
touch rx_buf (which is a preceding step before touching xdp_buff),
xdp_buff will already be hot in cache. Second thing was that xdp_rxq is
used rather rarely and it occupies a separate cacheline, so maybe it is
better to have it at the end of ice_rx_ring.
Other change that affects ice_rx_ring is the introduction of
ice_rx_ring::first_desc. Its purpose is twofold - first is to propagate
rx_buf->act to all the parts of current xdp_buff after running XDP
program, so that ice_put_rx_buf() that got moved out of the main Rx
processing loop will be able to tak an appriopriate action on each
buffer. Second is for ice_construct_skb().
ice_construct_skb() has a copybreak mechanism which had an explicit
impact on xdp_buff->skb conversion in the new approach when legacy Rx
flag is toggled. It works in a way that linear part is 256 bytes long,
if frame is bigger than that, remaining bytes are going as a frag to
skb_shared_info.
This means while memcpying frags from xdp_buff to newly allocated skb,
care needs to be taken when picking the destination frag array entry.
Upon the time ice_construct_skb() is called, when dealing with
fragmented frame, current rx_buf points to the *last* fragment, but
copybreak needs to be done against the first one. That's where
ice_rx_ring::first_desc helps.
When frame building spans across NAPI polls (DD bit is not set on
current descriptor and xdp->data is not NULL) with current Rx buffer
handling state there might be some problems.
Since calls to ice_put_rx_buf() were pulled out of the main Rx
processing loop and were scoped from cached_ntc to current ntc, remember
that now mentioned function relies on rx_buf->act, which is set within
ice_run_xdp(). ice_run_xdp() is called when EOP bit was found, so
currently we could put Rx buffer with rx_buf->act being *uninitialized*.
To address this, change scoping to rely on first_desc on both boundaries
instead.
This also implies that cleaned_count which is used as an input to
ice_alloc_rx_buffers() and tells how many new buffers should be refilled
has to be adjusted. If it stayed as is, what could happen is a case
where ntc would go over ntu.
Therefore, remove cleaned_count altogether and use against allocing
routine newly introduced ICE_RX_DESC_UNUSED() macro which is an
equivalent of ICE_DESC_UNUSED() dedicated for Rx side and based on
struct ice_rx_ring::first_desc instead of next_to_clean.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20230131204506.219292-11-maciej.fijalkowski@intel.com
Maciej Fijalkowski [Tue, 31 Jan 2023 20:45:02 +0000 (21:45 +0100)]
ice: Use xdp->frame_sz instead of recalculating truesize
SKB path calculates truesize on three different functions, which could
be avoided as xdp_buff carries the already calculated truesize under
xdp_buff::frame_sz. If ice_add_rx_frag() is adjusted to take the
xdp_buff as an input just like functions responsible for creating
sk_buff initially, codebase could be simplified by removing these
redundant recalculations and rely on xdp_buff::frame_sz instead.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20230131204506.219292-10-maciej.fijalkowski@intel.com
Maciej Fijalkowski [Tue, 31 Jan 2023 20:45:01 +0000 (21:45 +0100)]
ice: Do not call ice_finalize_xdp_rx() unnecessarily
Currently ice_finalize_xdp_rx() is called only when xdp_prog is present
on VSI, which is a good thing. However, this optimization can be
enhanced and check only if any of the XDP_TX/XDP_REDIRECT took place in
current Rx processing. Non-zero value of @xdp_xmit indicates that
xdp_prog is present on VSI. This way XDP_DROP-based workloads will not
suffer from unnecessary calls to external function.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20230131204506.219292-9-maciej.fijalkowski@intel.com
Maciej Fijalkowski [Tue, 31 Jan 2023 20:45:00 +0000 (21:45 +0100)]
ice: Use ice_max_xdp_frame_size() in ice_xdp_setup_prog()
This should have been used in there from day 1, let us address that
before introducing XDP multi-buffer support for Rx side.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20230131204506.219292-8-maciej.fijalkowski@intel.com
Maciej Fijalkowski [Tue, 31 Jan 2023 20:44:59 +0000 (21:44 +0100)]
ice: Centrallize Rx buffer recycling
Currently calls to ice_put_rx_buf() are sprinkled through
ice_clean_rx_irq() - first place is for explicit flow director's
descriptor handling, second is after running XDP prog and the last one
is after taking care of skb.
1st callsite was actually only for ntc bump purpose, as Rx buffer to be
recycled is not even passed to a function.
It is possible to walk through Rx buffers processed in particular NAPI
cycle by caching ntc from beginning of the ice_clean_rx_irq().
To do so, let us store XDP verdict inside ice_rx_buf, so action we need
to take on will be known. For XDP prog absence, just store ICE_XDP_PASS
as a verdict.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20230131204506.219292-7-maciej.fijalkowski@intel.com
Maciej Fijalkowski [Tue, 31 Jan 2023 20:44:58 +0000 (21:44 +0100)]
ice: Inline eop check
This might be in future used by ZC driver and might potentially yield a
minor performance boost. While at it, constify arguments that
ice_is_non_eop() takes, since they are pointers and this will help compiler
while generating asm.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20230131204506.219292-6-maciej.fijalkowski@intel.com
Maciej Fijalkowski [Tue, 31 Jan 2023 20:44:57 +0000 (21:44 +0100)]
ice: Pull out next_to_clean bump out of ice_put_rx_buf()
Plan is to move ice_put_rx_buf() to the end of ice_clean_rx_irq() so
in order to keep the ability of walking through HW Rx descriptors, pull
out next_to_clean handling out of ice_put_rx_buf().
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20230131204506.219292-5-maciej.fijalkowski@intel.com
Maciej Fijalkowski [Tue, 31 Jan 2023 20:44:56 +0000 (21:44 +0100)]
ice: Store page count inside ice_rx_buf
This will allow us to avoid carrying additional auxiliary array of page
counts when dealing with XDP multi buffer support. Previously combining
fragmented frame to skb was not affected in the same way as XDP would be
as whole frame is needed to be in place before executing XDP prog.
Therefore, when going through HW Rx descriptors one-by-one, calls to
ice_put_rx_buf() need to be taken *after* running XDP prog on a
potentially multi buffered frame, so some additional storage of
page count is needed.
By adding page count to rx buf, it will make it easier to walk through
processed entries at the end of rx cleaning routine and decide whether
or not buffers should be recycled.
While at it, bump ice_rx_buf::pagecnt_bias from u16 up to u32. It was
proven many times that calculations on variables smaller than standard
register size are harmful. This was also the case during experiments
with embedding page count to ice_rx_buf - when this was added as u16 it
had a performance impact.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20230131204506.219292-4-maciej.fijalkowski@intel.com
Maciej Fijalkowski [Tue, 31 Jan 2023 20:44:55 +0000 (21:44 +0100)]
ice: Add xdp_buff to ice_rx_ring struct
In preparation for XDP multi-buffer support, let's store xdp_buff on
Rx ring struct. This will allow us to combine fragmented frames across
separate NAPI cycles in the same way as currently skb fragments are
handled. This means that skb pointer on Rx ring will become redundant
and will be removed. For now it is kept and layout of Rx ring struct was
not inspected, some member movement will be needed later on so that will
be the time to take care of it.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20230131204506.219292-3-maciej.fijalkowski@intel.com
Maciej Fijalkowski [Tue, 31 Jan 2023 20:44:54 +0000 (21:44 +0100)]
ice: Prepare legacy-rx for upcoming XDP multi-buffer support
Rx path is going to be modified in a way that fragmented frame will be
gathered within xdp_buff in the first place. This approach implies that
underlying buffer has to provide tailroom for skb_shared_info. This is
currently the case when ring uses build_skb but not when legacy-rx knob
is turned on. This case configures 2k Rx buffers and has no way to
provide either headroom or tailroom - FWIW it currently has
XDP_PACKET_HEADROOM which is broken and in here it is removed. 2k Rx
buffers were used so driver in this setting was able to support 9k MTU
as it can chain up to 5 Rx buffers. With offset configuring HW writing
2k of a data was passing the half of the page which broke the assumption
of our internal page recycling tricks.
Now if above got fixed and legacy-rx path would be left as is, when
referring to skb_shared_info via xdp_get_shared_info_from_buff(),
packet's content would be corrupted again. Hence size of Rx buffer needs
to be lowered and therefore supported MTU. This operation will allow us
to keep the unified data path and with 8k MTU users (if any of
legacy-rx) would still be good to go. However, tendency is to drop the
support for this code path at some point.
Add ICE_RXBUF_1664 as vsi::rx_buf_len and ICE_MAX_FRAME_LEGACY_RX (8320)
as vsi::max_frame for legacy-rx. For bigger page sizes configure 3k Rx
buffers, not 2k.
Since headroom support is removed, disable data_meta support on legacy-rx.
When preparing XDP buff, rely on ice_rx_ring::rx_offset setting when
deciding whether to support data_meta or not.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20230131204506.219292-2-maciej.fijalkowski@intel.com
Alexei Starovoitov [Mon, 30 Jan 2023 03:16:29 +0000 (19:16 -0800)]
Merge branch 'Support bpf trampoline for s390x'
Ilya Leoshkevich says:
====================
v2: https://lore.kernel.org/bpf/
20230128000650.
1516334-1-iii@linux.ibm.com/#t
v2 -> v3:
- Make __arch_prepare_bpf_trampoline static.
(Reported-by: kernel test robot <lkp@intel.com>)
- Support both old- and new- style map definitions in sk_assign. (Alexei)
- Trim DENYLIST.s390x. (Alexei)
- Adjust s390x vmlinux path in vmtest.sh.
- Drop merged fixes.
v1: https://lore.kernel.org/bpf/
20230125213817.
1424447-1-iii@linux.ibm.com/#t
v1 -> v2:
- Fix core_read_macros, sk_assign, test_profiler, test_bpffs (24/31;
I'm not quite happy with the fix, but don't have better ideas),
and xdp_synproxy. (Andrii)
- Prettify liburandom_read and verify_pkcs7_sig fixes. (Andrii)
- Fix bpf_usdt_arg using barrier_var(); prettify barrier_var(). (Andrii)
- Change BPF_MAX_TRAMP_LINKS to enum and query it using BTF. (Andrii)
- Improve bpf_jit_supports_kfunc_call() description. (Alexei)
- Always check sign_extend() return value.
- Cc: Alexander Gordeev.
Hi,
This series implements poke, trampoline, kfunc, and mixing subprogs
and tailcalls on s390x.
The following failures still remain:
#82 get_stack_raw_tp:FAIL
get_stack_print_output:FAIL:user_stack corrupted user stack
Known issue:
We cannot reliably unwind userspace on s390x without DWARF.
#101 ksyms_module:FAIL
address of kernel function bpf_testmod_test_mod_kfunc is out of range
Known issue:
Kernel and modules are too far away from each other on s390x.
#190 stacktrace_build_id:FAIL
Known issue:
We cannot reliably unwind userspace on s390x without DWARF.
#281 xdp_metadata:FAIL
See patch 6.
None of these seem to be due to the new changes.
Best regards,
Ilya
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sun, 29 Jan 2023 19:05:01 +0000 (20:05 +0100)]
selftests/bpf: Trim DENYLIST.s390x
Now that trampoline is implemented, enable a number of tests on s390x.
18 of the remaining failures have to do with either lack of rethook
(fixed by [1]) or syscall symbols missing from BTF (fixed by [2]).
Do not re-classify the remaining failures for now; wait until the
s390/for-next fixes are merged and re-classify only the remaining few.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/s390/linux.git/commit/?h=for-next&id=
1a280f48c0e403903cf0b4231c95b948e664f25a
[2] https://git.kernel.org/pub/scm/linux/kernel/git/s390/linux.git/commit/?h=for-next&id=
2213d44e140f979f4b60c3c0f8dd56d151cc8692
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230129190501.1624747-9-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sun, 29 Jan 2023 19:05:00 +0000 (20:05 +0100)]
selftests/bpf: Fix s390x vmlinux path
After commit
edd4a8667355 ("s390/boot: get rid of startup archive")
there is no more compressed/ subdirectory.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230129190501.1624747-8-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sun, 29 Jan 2023 19:04:59 +0000 (20:04 +0100)]
s390/bpf: Implement bpf_jit_supports_kfunc_call()
Implement calling kernel functions from eBPF. In general, the eBPF ABI
is fairly close to that of s390x, with one important difference: on
s390x callers should sign-extend signed arguments. Handle that by using
information returned by bpf_jit_find_kfunc_model().
Here is an example of how sign extensions works. Suppose we need to
call the following function from BPF:
; long noinline bpf_kfunc_call_test4(signed char a, short b, int c,
long d)
0000000000936a78 <bpf_kfunc_call_test4>:
936a78: c0 04 00 00 00 00 jgnop bpf_kfunc_call_test4
; return (long)a + (long)b + (long)c + d;
936a7e: b9 08 00 45 agr %r4,%r5
936a82: b9 08 00 43 agr %r4,%r3
936a86: b9 08 00 24 agr %r2,%r4
936a8a: c0 f4 00 1e 3b 27 jg <__s390_indirect_jump_r14>
As per the s390x ABI, bpf_kfunc_call_test4() has the right to assume
that a, b and c are sign-extended by the caller, which results in using
64-bit additions (agr) without any additional conversions. Without sign
extension we would have the following on the JITed code side:
; tmp = bpf_kfunc_call_test4(-3, -30, -200, -1000);
; 5: b4 10 00 00 ff ff ff fd w1 = -3
0x3ff7fdcdad4: llilf %r2,0xfffffffd
; 6: b4 20 00 00 ff ff ff e2 w2 = -30
0x3ff7fdcdada: llilf %r3,0xffffffe2
; 7: b4 30 00 00 ff ff ff 38 w3 = -200
0x3ff7fdcdae0: llilf %r4,0xffffff38
; 8: b7 40 00 00 ff ff fc 18 r4 = -1000
0x3ff7fdcdae6: lgfi %r5,-1000
0x3ff7fdcdaec: mvc 64(4,%r15),160(%r15)
0x3ff7fdcdaf2: lgrl %r1,bpf_kfunc_call_test4@GOT
0x3ff7fdcdaf8: brasl %r14,__s390_indirect_jump_r1
This first 3 llilfs are 32-bit loads, that need to be sign-extended
to 64 bits.
Note: at the moment bpf_jit_find_kfunc_model() does not seem to play
nicely with XDP metadata functions: add_kfunc_call() adds an "abstract"
bpf_*() version to kfunc_btf_tab, but then fixup_kfunc_call() puts the
concrete version into insn->imm, which bpf_jit_find_kfunc_model() cannot
find. But this seems to be a common code problem.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230129190501.1624747-7-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sun, 29 Jan 2023 19:04:58 +0000 (20:04 +0100)]
s390/bpf: Implement bpf_jit_supports_subprog_tailcalls()
Allow mixing subprogs and tail calls by passing the current tail
call count to subprogs.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230129190501.1624747-6-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sun, 29 Jan 2023 19:04:57 +0000 (20:04 +0100)]
s390/bpf: Implement arch_prepare_bpf_trampoline()
arch_prepare_bpf_trampoline() is used for direct attachment of eBPF
programs to various places, bypassing kprobes. It's responsible for
calling a number of eBPF programs before, instead and/or after
whatever they are attached to.
Add a s390x implementation, paying attention to the following:
- Reuse the existing JIT infrastructure, where possible.
- Like the existing JIT, prefer making multiple passes instead of
backpatching. Currently 2 passes is enough. If literal pool is
introduced, this needs to be raised to 3. However, at the moment
adding literal pool only makes the code larger. If branch
shortening is introduced, the number of passes needs to be
increased even further.
- Support both regular and ftrace calling conventions, depending on
the trampoline flags.
- Use expolines for indirect calls.
- Handle the mismatch between the eBPF and the s390x ABIs.
- Sign-extend fmod_ret return values.
invoke_bpf_prog() produces about 120 bytes; it might be possible to
slightly optimize this, but reaching 50 bytes, like on x86_64, looks
unrealistic: just loading cookie, __bpf_prog_enter, bpf_func, insnsi
and __bpf_prog_exit as literals already takes at least 5 * 12 = 60
bytes, and we can't use relative addressing for most of them.
Therefore, lower BPF_MAX_TRAMP_LINKS on s390x.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230129190501.1624747-5-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sun, 29 Jan 2023 19:04:56 +0000 (20:04 +0100)]
s390/bpf: Implement bpf_arch_text_poke()
bpf_arch_text_poke() is used to hotpatch eBPF programs and trampolines.
s390x has a very strict hotpatching restriction: the only thing that is
allowed to be hotpatched is conditional branch mask.
Take the same approach as commit
de5012b41e5c ("s390/ftrace: implement
hotpatching"): create a conditional jump to a "plt", which loads the
target address from memory and jumps to it; then first patch this
address, and then the mask.
Trampolines (introduced in the next patch) respect the ftrace calling
convention: the return address is in %r0, and %r1 is clobbered. With
that in mind, bpf_arch_text_poke() does not differentiate between jumps
and calls.
However, there is a simple optimization for jumps (for the epilogue_ip
case): if a jump already points to the destination, then there is no
"plt" and we can just flip the mask.
For simplicity, the "plt" template is defined in assembly, and its size
is used to define C arrays. There doesn't seem to be a way to convey
this size to C as a constant, so it's hardcoded and double-checked
during runtime.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230129190501.1624747-4-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sun, 29 Jan 2023 19:04:55 +0000 (20:04 +0100)]
s390/bpf: Add expoline to tail calls
All the indirect jumps in the eBPF JIT already use expolines, except
for the tail call one.
Fixes:
de5cb6eb514e ("s390: use expoline thunks in the BPF JIT")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230129190501.1624747-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sun, 29 Jan 2023 19:04:54 +0000 (20:04 +0100)]
selftests/bpf: Fix sk_assign on s390x
sk_assign is failing on an s390x machine running Debian "bookworm" for
2 reasons: legacy server_map definition and uninitialized addrlen in
recvfrom() call.
Fix by adding a new-style server_map definition and dropping addrlen
(recvfrom() allows NULL values for src_addr and addrlen).
Since the test should support tc built without libbpf, build the prog
twice: with the old-style definition and with the new-style definition,
then select the right one at runtime. This could be done at compile
time too, but this would not be cross-compilation friendly.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230129190501.1624747-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:45 +0000 (01:06 +0100)]
s390/bpf: Fix a typo in a comment
"desription" should be "description".
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-27-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:44 +0000 (01:06 +0100)]
bpf: btf: Add BTF_FMODEL_SIGNED_ARG flag
s390x eBPF JIT needs to know whether a function return value is signed
and which function arguments are signed, in order to generate code
compliant with the s390x ABI.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-26-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:43 +0000 (01:06 +0100)]
bpf: iterators: Split iterators.lskel.h into little- and big- endian versions
iterators.lskel.h is little-endian, therefore bpf iterator is currently
broken on big-endian systems. Introduce a big-endian version and add
instructions regarding its generation. Unfortunately bpftool's
cross-endianness capabilities are limited to BTF right now, so the
procedure requires access to a big-endian machine or a configured
emulator.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-25-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:42 +0000 (01:06 +0100)]
libbpf: Fix BPF_PROBE_READ{_STR}_INTO() on s390x
BPF_PROBE_READ_INTO() and BPF_PROBE_READ_STR_INTO() should map to
bpf_probe_read() and bpf_probe_read_str() respectively in order to work
correctly on architectures with !ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-24-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:41 +0000 (01:06 +0100)]
libbpf: Fix unbounded memory access in bpf_usdt_arg()
Loading programs that use bpf_usdt_arg() on s390x fails with:
; if (arg_num >= BPF_USDT_MAX_ARG_CNT || arg_num >= spec->arg_cnt)
128: (79) r1 = *(u64 *)(r10 -24) ; frame1: R1_w=scalar(umax=
4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
129: (25) if r1 > 0xb goto pc+83 ; frame1: R1_w=scalar(umax=11,var_off=(0x0; 0xf))
...
; arg_spec = &spec->args[arg_num];
135: (79) r1 = *(u64 *)(r10 -24) ; frame1: R1_w=scalar(umax=
4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
...
; switch (arg_spec->arg_type) {
139: (61) r1 = *(u32 *)(r2 +8)
R2 unbounded memory access, make sure to bounds check any such access
The reason is that, even though the C code enforces that
arg_num < BPF_USDT_MAX_ARG_CNT, the verifier cannot propagate this
constraint to the arg_spec assignment yet. Help it by forcing r1 back
to stack after comparison.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-23-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:40 +0000 (01:06 +0100)]
libbpf: Simplify barrier_var()
Use a single "+r" constraint instead of the separate "=r" and "0".
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-22-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:39 +0000 (01:06 +0100)]
selftests/bpf: Fix profiler on s390x
Use bpf_probe_read_kernel() and bpf_probe_read_kernel_str() instead
of bpf_probe_read() and bpf_probe_read_kernel().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-21-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:38 +0000 (01:06 +0100)]
selftests/bpf: Fix xdp_synproxy/tc on s390x
Use the correct datatype for the values map values; currently the test
works by accident, since on little-endian machines it is sometimes
acceptable to access u64 as u32.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-20-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:36 +0000 (01:06 +0100)]
selftests/bpf: Fix vmlinux test on s390x
Use a syscall macro to access the nanosleep()'s first argument;
currently the code uses gprs[2] instead of orig_gpr2.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-18-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:35 +0000 (01:06 +0100)]
selftests/bpf: Fix test_xdp_adjust_tail_grow2 on s390x
s390x cache line size is 256 bytes, so skb_shared_info must be aligned
on a much larger boundary than for x86.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-17-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:34 +0000 (01:06 +0100)]
selftests/bpf: Fix test_lsm on s390x
Use syscall macros to access the setdomainname() arguments; currently
the code uses gprs[2] instead of orig_gpr2 for the first argument.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-16-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:33 +0000 (01:06 +0100)]
selftests/bpf: Add a sign-extension test for kfuncs
s390x ABI requires the caller to zero- or sign-extend the arguments.
eBPF already deals with zero-extension (by definition of its ABI), but
not with sign-extension.
Add a test to cover that potentially problematic area.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-15-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:32 +0000 (01:06 +0100)]
selftests/bpf: Increase SIZEOF_BPF_LOCAL_STORAGE_ELEM on s390x
sizeof(struct bpf_local_storage_elem) is 512 on s390x:
struct bpf_local_storage_elem {
struct hlist_node map_node; /* 0 16 */
struct hlist_node snode; /* 16 16 */
struct bpf_local_storage * local_storage; /* 32 8 */
struct callback_head rcu __attribute__((__aligned__(8))); /* 40 16 */
/* XXX 200 bytes hole, try to pack */
/* --- cacheline 1 boundary (256 bytes) --- */
struct bpf_local_storage_data sdata __attribute__((__aligned__(256))); /* 256 8 */
/* size: 512, cachelines: 2, members: 5 */
/* sum members: 64, holes: 1, sum holes: 200 */
/* padding: 248 */
/* forced alignments: 2, forced holes: 1, sum forced holes: 200 */
} __attribute__((__aligned__(256)));
As the existing comment suggests, use a larger number in order to be
future-proof.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-14-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:31 +0000 (01:06 +0100)]
selftests/bpf: Check stack_mprotect() return value
If stack_mprotect() succeeds, errno is not changed. This can produce
misleading error messages, that show stale errno.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-13-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:30 +0000 (01:06 +0100)]
selftests/bpf: Fix cgrp_local_storage on s390x
Sync the definition of socket_cookie between the eBPF program and the
test. Currently the test works by accident, since on little-endian it
is sometimes acceptable to access u64 as u32.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-12-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:29 +0000 (01:06 +0100)]
selftests/bpf: Fix xdp_do_redirect on s390x
s390x cache line size is 256 bytes, so skb_shared_info must be aligned
on a much larger boundary than for x86. This makes the maximum packet
size smaller.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-11-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:28 +0000 (01:06 +0100)]
selftests/bpf: Fix verify_pkcs7_sig on s390x
Use bpf_probe_read_kernel() instead of bpf_probe_read(), which is not
defined on all architectures.
While at it, improve the error handling: do not hide the verifier log,
and check the return values of bpf_probe_read_kernel() and
bpf_copy_from_user().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-10-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:27 +0000 (01:06 +0100)]
selftests/bpf: Fix decap_sanity_ns cleanup
decap_sanity prints the following on the 1st run:
decap_sanity: sh: 1: Syntax error: Bad fd number
and the following on the 2nd run:
Cannot create namespace file "/run/netns/decap_sanity_ns": File exists
The problem is that the cleanup command has a typo and does nothing.
Fix the typo.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-9-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:26 +0000 (01:06 +0100)]
selftests/bpf: Set errno when urand_spawn() fails
The result of urand_spawn() is checked with ASSERT_OK_PTR, which treats
NULL as success if errno == 0.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-8-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:25 +0000 (01:06 +0100)]
selftests/bpf: Fix kfree_skb on s390x
h_proto is big-endian; use htons() in order to make comparison work on
both little- and big-endian machines.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-7-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:24 +0000 (01:06 +0100)]
selftests/bpf: Fix symlink creation error
When building with O=, the following error occurs:
ln: failed to create symbolic link 'no_alu32/bpftool': No such file or directory
Adjust the code to account for $(OUTPUT).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-6-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:23 +0000 (01:06 +0100)]
selftests/bpf: Fix liburandom_read.so linker error
When building with O=, the following linker error occurs:
clang: error: no such file or directory: 'liburandom_read.so'
Fix by adding $(OUTPUT) to the linker search path.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-5-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:22 +0000 (01:06 +0100)]
selftests/bpf: Query BPF_MAX_TRAMP_LINKS using BTF
Do not hard-code the value, since for s390x it will be smaller than
for x86.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-4-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:21 +0000 (01:06 +0100)]
bpf: Change BPF_MAX_TRAMP_LINKS to enum
This way it's possible to query its value from testcases using BTF.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Sat, 28 Jan 2023 00:06:20 +0000 (01:06 +0100)]
bpf: Use ARG_CONST_SIZE_OR_ZERO for 3rd argument of bpf_tcp_raw_gen_syncookie_ipv{4,6}()
These functions already check that th_len < sizeof(*th), and
propagating the lower bound (th_len > 0) may be challenging
in complex code, e.g. as is the case with xdp_synproxy test on
s390x [1]. Switch to ARG_CONST_SIZE_OR_ZERO in order to make the
verifier accept code where it cannot prove that th_len > 0.
[1] https://lore.kernel.org/bpf/CAEf4Bzb3uiSHtUbgVWmkWuJ5Sw1UZd4c_iuS4QXtUkXmTTtXuQ@mail.gmail.com/
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Randy Dunlap [Sat, 28 Jan 2023 19:50:46 +0000 (11:50 -0800)]
Documentation: bpf: correct spelling
Correct spelling problems for Documentation/bpf/ as reported
by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: bpf@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20230128195046.13327-1-rdunlap@infradead.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Vernet [Sat, 28 Jan 2023 14:15:37 +0000 (08:15 -0600)]
bpf: Build-time assert that cpumask offset is zero
The first element of a struct bpf_cpumask is a cpumask_t. This is done
to allow struct bpf_cpumask to be cast to a struct cpumask. If this
element were ever moved to another field, any BPF program passing a
struct bpf_cpumask * to a kfunc expecting a const struct cpumask * would
immediately fail to load. Add a build-time assertion so this is
assumption is captured and verified.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230128141537.100777-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Johannes Berg [Fri, 27 Jan 2023 07:45:06 +0000 (08:45 +0100)]
net: netlink: recommend policy range validation
For large ranges (outside of s16) the documentation currently
recommends open-coding the validation, but it's better to use
the NLA_POLICY_FULL_RANGE() or NLA_POLICY_FULL_RANGE_SIGNED()
policy validation instead; recommend that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230127084506.09f280619d64.I5dece85f06efa8ab0f474ca77df9e26d3553d4ab@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 28 Jan 2023 07:59:45 +0000 (23:59 -0800)]
Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next 2023-01-28
We've added 124 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 6386 insertions(+), 1827 deletions(-).
The main changes are:
1) Implement XDP hints via kfuncs with initial support for RX hash and
timestamp metadata kfuncs, from Stanislav Fomichev and
Toke Høiland-Jørgensen.
Measurements on overhead: https://lore.kernel.org/bpf/875yellcx6.fsf@toke.dk
2) Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case, from Andrii Nakryiko.
3) Significantly reduce the search time for module symbols by livepatch
and BPF, from Jiri Olsa and Zhen Lei.
4) Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs
in different time intervals, from David Vernet.
5) Fix several issues in the dynptr processing such as stack slot liveness
propagation, missing checks for PTR_TO_STACK variable offset, etc,
from Kumar Kartikeya Dwivedi.
6) Various performance improvements, fixes, and introduction of more
than just one XDP program to XSK selftests, from Magnus Karlsson.
7) Big batch to BPF samples to reduce deprecated functionality,
from Daniel T. Lee.
8) Enable struct_ops programs to be sleepable in verifier,
from David Vernet.
9) Reduce pr_warn() noise on BTF mismatches when they are expected under
the CONFIG_MODULE_ALLOW_BTF_MISMATCH config anyway, from Connor O'Brien.
10) Describe modulo and division by zero behavior of the BPF runtime
in BPF's instruction specification document, from Dave Thaler.
11) Several improvements to libbpf API documentation in libbpf.h,
from Grant Seltzer.
12) Improve resolve_btfids header dependencies related to subcmd and add
proper support for HOSTCC, from Ian Rogers.
13) Add ipip6 and ip6ip decapsulation support for bpf_skb_adjust_room()
helper along with BPF selftests, from Ziyang Xuan.
14) Simplify the parsing logic of structure parameters for BPF trampoline
in the x86-64 JIT compiler, from Pu Lehui.
15) Get BTF working for kernels with CONFIG_RUST enabled by excluding
Rust compilation units with pahole, from Martin Rodriguez Reboredo.
16) Get bpf_setsockopt() working for kTLS on top of TCP sockets,
from Kui-Feng Lee.
17) Disable stack protection for BPF objects in bpftool given BPF backends
don't support it, from Holger Hoffstätte.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (124 commits)
selftest/bpf: Make crashes more debuggable in test_progs
libbpf: Add documentation to map pinning API functions
libbpf: Fix malformed documentation formatting
selftests/bpf: Properly enable hwtstamp in xdp_hw_metadata
selftests/bpf: Calls bpf_setsockopt() on a ktls enabled socket.
bpf: Check the protocol of a sock to agree the calls to bpf_setsockopt().
bpf/selftests: Verify struct_ops prog sleepable behavior
bpf: Pass const struct bpf_prog * to .check_member
libbpf: Support sleepable struct_ops.s section
bpf: Allow BPF_PROG_TYPE_STRUCT_OPS programs to be sleepable
selftests/bpf: Fix vmtest static compilation error
tools/resolve_btfids: Alter how HOSTCC is forced
tools/resolve_btfids: Install subcmd headers
bpf/docs: Document the nocast aliasing behavior of ___init
bpf/docs: Document how nested trusted fields may be defined
bpf/docs: Document cpumask kfuncs in a new file
selftests/bpf: Add selftest suite for cpumask kfuncs
selftests/bpf: Add nested trust selftests suite
bpf: Enable cpumasks to be queried and used as kptrs
bpf: Disallow NULLable pointers for trusted kfuncs
...
====================
Link: https://lore.kernel.org/r/20230128004827.21371-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao [Wed, 25 Jan 2023 18:52:30 +0000 (10:52 -0800)]
netpoll: Remove 4s sleep during carrier detection
This patch removes the msleep(4s) during netpoll_setup() if the carrier
appears instantly.
Here are some scenarios where this workaround is counter-productive in
modern ages:
Servers which have BMC communicating over NC-SI via the same NIC as gets
used for netconsole. BMC will keep the PHY up, hence the carrier
appearing instantly.
The link is fibre, SERDES getting sync could happen within 0.1Hz, and
the carrier also appears instantly.
Other than that, if a driver is reporting instant carrier and then
losing it, this is probably a driver bug.
Reported-by: Michael van der Westhuizen <rmikey@meta.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20230125185230.3574681-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 28 Jan 2023 06:25:19 +0000 (22:25 -0800)]
Merge git://git./linux/kernel/git/netdev/net
Conflicts:
drivers/net/ethernet/intel/ice/ice_main.c
418e53401e47 ("ice: move devlink port creation/deletion")
643ef23bd9dd ("ice: Introduce local var for readability")
https://lore.kernel.org/all/
20230127124025.
0dacef40@canb.auug.org.au/
https://lore.kernel.org/all/
20230124005714.
3996270-1-anthony.l.nguyen@intel.com/
drivers/net/ethernet/engleder/tsnep_main.c
3d53aaef4332 ("tsnep: Fix TX queue stop/wake for multiple queues")
25faa6a4c5ca ("tsnep: Replace TX spin_lock with __netif_tx_lock")
https://lore.kernel.org/all/
20230127123604.
36bb3e99@canb.auug.org.au/
net/netfilter/nf_conntrack_proto_sctp.c
13bd9b31a969 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"")
a44b7651489f ("netfilter: conntrack: unify established states for SCTP paths")
f71cb8f45d09 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets")
https://lore.kernel.org/all/
20230127125052.
674281f9@canb.auug.org.au/
https://lore.kernel.org/all/
d36076f3-6add-a442-6d4b-
ead9f7ffff86@tessares.net/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arınç ÜNAL [Thu, 26 Jan 2023 19:01:11 +0000 (22:01 +0300)]
net: dsa: mt7530: fix tristate and help description
Fix description for tristate and help sections which include inaccurate
information.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230126190110.9124-1-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 28 Jan 2023 06:28:01 +0000 (22:28 -0800)]
Merge branch 'net-xdp-execute-xdp_do_flush-before-napi_complete_done'
Magnus Karlsson says:
====================
net: xdp: execute xdp_do_flush() before napi_complete_done()
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found in [1].
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in [2].
The drivers have only been compile-tested since I do not own any of
the HW below. So if you are a maintainer, it would be great if you
could take a quick look to make sure I did not mess something up.
Note that these were the drivers I found that violated the ordering by
running a simple script and manually checking the ones that came up as
potential offenders. But the script was not perfect in any way. There
might still be offenders out there, since the script can generate
false negatives.
[1] https://lore.kernel.org/r/
20221220185903.
1105011-1-sbohrer@cloudflare.com
[2] https://lore.kernel.org/all/
20210624160609.292325-1-toke@redhat.com/
====================
Link: https://lore.kernel.org/r/20230125074901.2737-1-magnus.karlsson@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Magnus Karlsson [Wed, 25 Jan 2023 07:49:01 +0000 (08:49 +0100)]
dpaa2-eth: execute xdp_do_flush() before napi_complete_done()
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.
Fixes:
d678be1dc1ec ("dpaa2-eth: add XDP_REDIRECT support")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Magnus Karlsson [Wed, 25 Jan 2023 07:49:00 +0000 (08:49 +0100)]
dpaa_eth: execute xdp_do_flush() before napi_complete_done()
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.
Fixes:
a1e031ffb422 ("dpaa_eth: add XDP_REDIRECT support")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Magnus Karlsson [Wed, 25 Jan 2023 07:48:59 +0000 (08:48 +0100)]
virtio-net: execute xdp_do_flush() before napi_complete_done()
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.
Fixes:
186b3c998c50 ("virtio-net: support XDP_REDIRECT")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Magnus Karlsson [Wed, 25 Jan 2023 07:48:58 +0000 (08:48 +0100)]
lan966x: execute xdp_do_flush() before napi_complete_done()
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.
Fixes:
a825b611c7c1 ("net: lan966x: Add support for XDP_REDIRECT")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Magnus Karlsson [Wed, 25 Jan 2023 07:48:57 +0000 (08:48 +0100)]
qede: execute xdp_do_flush() before napi_complete_done()
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.
Fixes:
d1b25b79e162b ("qede: add .ndo_xdp_xmit() and XDP_REDIRECT support")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stanislav Fomichev [Fri, 27 Jan 2023 21:57:05 +0000 (13:57 -0800)]
selftest/bpf: Make crashes more debuggable in test_progs
Reset stdio before printing verbose log of the SIGSEGV'ed test.
Otherwise, it's hard to understand what's going on in the cases like [0].
With the following patch applied:
--- a/tools/testing/selftests/bpf/prog_tests/xdp_metadata.c
+++ b/tools/testing/selftests/bpf/prog_tests/xdp_metadata.c
@@ -392,6 +392,11 @@ void test_xdp_metadata(void)
"generate freplace packet"))
goto out;
+
+ ASSERT_EQ(1, 2, "oops");
+ int *x = 0;
+ *x = 1; /* die */
+
while (!retries--) {
if (bpf_obj2->bss->called)
break;
Before:
#281 xdp_metadata:FAIL
Caught signal #11!
Stack trace:
./test_progs(crash_handler+0x1f)[0x55c919d98bcf]
/lib/x86_64-linux-gnu/libc.so.6(+0x3bf90)[0x7f36aea5df90]
./test_progs(test_xdp_metadata+0x1db0)[0x55c919d8c6d0]
./test_progs(+0x23b438)[0x55c919d9a438]
./test_progs(main+0x534)[0x55c919d99454]
/lib/x86_64-linux-gnu/libc.so.6(+0x2718a)[0x7f36aea4918a]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85)[0x7f36aea49245]
./test_progs(_start+0x21)[0x55c919b82ef1]
After:
test_xdp_metadata:PASS:ip netns add xdp_metadata 0 nsec
open_netns:PASS:malloc token 0 nsec
open_netns:PASS:open /proc/self/ns/net 0 nsec
open_netns:PASS:open netns fd 0 nsec
open_netns:PASS:setns 0 nsec
..
test_xdp_metadata:FAIL:oops unexpected oops: actual 1 != expected 2
#281 xdp_metadata:FAIL
Caught signal #11!
Stack trace:
./test_progs(crash_handler+0x1f)[0x562714a76bcf]
/lib/x86_64-linux-gnu/libc.so.6(+0x3bf90)[0x7fa663f9cf90]
./test_progs(test_xdp_metadata+0x1db0)[0x562714a6a6d0]
./test_progs(+0x23b438)[0x562714a78438]
./test_progs(main+0x534)[0x562714a77454]
/lib/x86_64-linux-gnu/libc.so.6(+0x2718a)[0x7fa663f8818a]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85)[0x7fa663f88245]
./test_progs(_start+0x21)[0x562714860ef1]
0: https://github.com/kernel-patches/bpf/actions/runs/
4019879316/jobs/
6907358876
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230127215705.1254316-1-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Grant Seltzer [Thu, 26 Jan 2023 02:42:25 +0000 (21:42 -0500)]
libbpf: Add documentation to map pinning API functions
This adds documentation for the following API functions:
- bpf_map__set_pin_path()
- bpf_map__pin_path()
- bpf_map__is_pinned()
- bpf_map__pin()
- bpf_map__unpin()
- bpf_object__pin_maps()
- bpf_object__unpin_maps()
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230126024225.520685-1-grantseltzer@gmail.com
Grant Seltzer [Thu, 26 Jan 2023 02:47:49 +0000 (21:47 -0500)]
libbpf: Fix malformed documentation formatting
This fixes the doxygen format documentation above the
user_ring_buffer__* APIs. There has to be a newline
before the @brief, otherwise doxygen won't render them
for libbpf.readthedocs.org.
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230126024749.522278-1-grantseltzer@gmail.com
David S. Miller [Fri, 27 Jan 2023 12:32:03 +0000 (12:32 +0000)]
Merge branch 'devlink-parama-cleanup'
Jiri Pirko says:
====================
devlink: Cleanup params usage
This patchset takes care of small cleanup of devlink params usage.
Some of the patches (first 2/3) are cosmetic, but I would like to
point couple of interesting ones:
Patch 9 is the main one of this set and introduces devlink instance
locking for params, similar to other devlink objects. That allows params
to be registered/unregistered when devlink instance is registered.
Patches 10-12 change mlx5 code to register non-driverinit params in the
code they are related to, and thanks to patch 8 this might be when
devlink instance is registered - for example during devlink reload.
---
v1->v2:
- Just small fix in the last patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 26 Jan 2023 07:58:38 +0000 (08:58 +0100)]
net/mlx5: Move eswitch port metadata devlink param to flow eswitch code
Move the param registration and handling code into the eswitch offloads
code as they are related to each other. No point in having the
devlink param registration done in separate file.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 26 Jan 2023 07:58:37 +0000 (08:58 +0100)]
net/mlx5: Move flow steering devlink param to flow steering code
Move the param registration and handling code into the flow steering
code as they are related to each other. No point in having the
devlink param registration done in separate file.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 26 Jan 2023 07:58:36 +0000 (08:58 +0100)]
net/mlx5: Move fw reset devlink param to fw reset code
Move the param registration and handling code into the fw reset code
as they are related to each other. No point in having the devlink param
registration done in separate file.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 26 Jan 2023 07:58:35 +0000 (08:58 +0100)]
devlink: protect devlink param list by instance lock
Commit
1d18bb1a4ddd ("devlink: allow registering parameters after
the instance") as the subject implies introduced possibility to register
devlink params even for already registered devlink instance. This is a
bit problematic, as the consistency or params list was originally
secured by the fact it is static during devlink lifetime. So in order to
protect the params list, take devlink instance lock during the params
operations. Introduce unlocked function variants and use them in drivers
in locked context. Put lock assertions to appropriate places.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 26 Jan 2023 07:58:34 +0000 (08:58 +0100)]
devlink: put couple of WARN_ONs in devlink_param_driverinit_value_get()
Put couple of WARN_ONs in devlink_param_driverinit_value_get() function
to clearly indicate, that it is a driver bug if used without reload
support or for non-driverinit param.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 26 Jan 2023 07:58:33 +0000 (08:58 +0100)]
devlink: make devlink_param_driverinit_value_set() return void
devlink_param_driverinit_value_set() currently returns int with possible
error, but no user is checking it anyway. The only reason for a fail is
a driver bug. So convert the function to return void and put WARN_ONs
on error paths.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 26 Jan 2023 07:58:32 +0000 (08:58 +0100)]
qed: remove pointless call to devlink_param_driverinit_value_set()
devlink_param_driverinit_value_set() call makes sense only for "
driverinit" params. However here, the param is "runtime".
devlink_param_driverinit_value_set() returns -EOPNOTSUPP in such case
and does not do anything. So remove the pointless call to
devlink_param_driverinit_value_set() entirely.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 26 Jan 2023 07:58:31 +0000 (08:58 +0100)]
ice: remove pointless calls to devlink_param_driverinit_value_set()
devlink_param_driverinit_value_set() call makes sense only for
"driverinit" params. However here, both params are "runtime".
devlink_param_driverinit_value_set() returns -EOPNOTSUPP in such case
and does not do anything. So remove the pointless calls to
devlink_param_driverinit_value_set() entirely.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 26 Jan 2023 07:58:30 +0000 (08:58 +0100)]
devlink: don't work with possible NULL pointer in devlink_param_unregister()
There is a WARN_ON checking the param_item for being NULL when the param
is not inserted in the list. That indicates a driver BUG. Instead of
continuing to work with NULL pointer with its consequences, return.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 26 Jan 2023 07:58:29 +0000 (08:58 +0100)]
devlink: make devlink_param_register/unregister static
There is no user outside the devlink code, so remove the export and make
the functions static. Move them before callers to avoid forward
declarations.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 26 Jan 2023 07:58:28 +0000 (08:58 +0100)]
net/mlx5: Covert devlink params registration to use devlink_params_register/unregister()
Since mlx5 is the only user of devlink API to register/unregister a
single param, convert it to use array registration function allowing to
simplify the devlink API by removing the single param registration
functions.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 26 Jan 2023 07:58:27 +0000 (08:58 +0100)]
net/mlx5: Change devlink param register/unregister function names
The functions are registering and unregistering devlink params, so
change the names accordingly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 27 Jan 2023 12:24:32 +0000 (12:24 +0000)]
Merge branch 'ethtool-netlink-next'
Jakub Kicinski says:
====================
ethtool: netlink: handle SET intro/outro in the common code
Factor out the boilerplate code from SET handlers to common code.
I volunteered to refactor the extack in GET in a conversation
with Vladimir but I gave up.
The handling of failures during dump in GET handlers is a bit
unclear to me. Some code uses presence of info as indication
of dump and tries to avoid reporting errors altogether
(including extack messages).
There's also the question of whether we should have a validation
callback (similar to .set_validate here) for GET. It looks like
.parse_request was expected to perform the validation. It takes
the extack and tb directly, not via info:
int (*parse_request)(struct ethnl_req_info *req_info,
struct nlattr **tb,
struct netlink_ext_ack *extack);
int (*prepare_data)(const struct ethnl_req_info *req_info,
struct ethnl_reply_data *reply_data,
struct genl_info *info);
so no crashes dereferencing info possible.
But .parse_request doesn't run under rtnl nor ethnl_ops_begin().
As a result some implementations defer validation until .prepare_data
where all the locks are held and they can call out to the driver.
All this makes me think that maybe we should refactor GET in the
same direction I'm refactoring SET. Split .prepare_data, take
more locks in the core, and add a validation helper which would
take extack directly:
- ret = ops->prepare_data(req_info, reply_data, info);
+ ret = ops->prepare_data_validate(req_info, reply_data, attrs, extack);
+ if (ret < 1) // if 0 -> skip for dump; -EOPNOTSUPP in do
+ goto err1;
+
+ ret = ethnl_ops_begin(dev);
+ if (ret)
+ goto err1;
+
+ ret = ops->prepare_data(req_info, reply_data); // no extack
+ ethnl_ops_complete(dev);
I'll file that away as a TODO for posterity / older me.
v2:
- invert checks for coalescing to avoid error code changes
- rebase and convert MM as well
v1: https://lore.kernel.org/all/
20230121054430.642280-1-kuba@kernel.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 25 Jan 2023 23:05:19 +0000 (15:05 -0800)]
ethtool: netlink: convert commands to common SET
Convert all SET commands where new common code is applicable.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 25 Jan 2023 23:05:18 +0000 (15:05 -0800)]
ethtool: netlink: handle SET intro/outro in the common code
Most ethtool SET callbacks follow the same general structure.
ethnl_parse_header_dev_get()
rtnl_lock()
ethnl_ops_begin()
... do stuff ...
ethtool_notify()
ethnl_ops_complete()
rtnl_unlock()
ethnl_parse_header_dev_put()
This leads to a lot of copy / pasted code an bugs when people
mis-handle the error path.
Add a generic implementation of this pattern with a .set callback
in struct ethnl_request_ops called to "do stuff".
Also add an optional .set_validate which is called before
ethnl_ops_begin() -- a lot of implementations do basic request
capability / sanity checking at that point.
Because we want to avoid generating the notification when
no change happened - adopt a slightly hairy return values:
- 0 means nothing to do (no notification)
- 1 means done / continue
- negative error codes on error
Reuse .hdr_attr from struct ethnl_request_ops, GET and SET
use the same attr spaces in all cases.
Convert pause as an example (and to avoid unused function warnings).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>