OSDN Git Service
Jason Wang [Fri, 11 Aug 2017 11:41:16 +0000 (19:41 +0800)]
tap: use build_skb() for small packet
We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate
skb in the past. This socket based method is not suitable for high
speed userspace like virtualization which usually:
- ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as
possible
- don't want to be block at sendmsg()
To eliminate the above overheads, this patch tries to use build_skb()
for small packet. We will do this only when the following conditions
are all met:
- TAP instead of TUN
- sk_sndbuf is INT_MAX
- caller don't want to be blocked
- zerocopy is not used
- packet size is smaller enough to use build_skb()
Pktgen from guest to host shows ~11% improvement for rx pps of tap:
Before: ~1.70Mpps
After : ~1.88Mpps
What's more important, this makes it possible to implement XDP for tap
before creating skbs.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Sitnicki [Wed, 9 Aug 2017 15:39:12 +0000 (17:39 +0200)]
rtnelink: Move link dump consistency check out of the loop
Calls to rtnl_dump_ifinfo() are protected by RTNL lock. So are the
{list,unlist}_netdevice() calls where we bump the net->dev_base_seq
number.
For this reason net->dev_base_seq can't change under out feet while
we're looping over links in rtnl_dump_ifinfo(). So move the check for
net->dev_base_seq change (since the last time we were called) out of the
loop.
This way we avoid giving a wrong impression that there are concurrent
updates to the link list going on while we're iterating over them.
Signed-off-by: Jakub Sitnicki <jkbs@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Fri, 11 Aug 2017 18:22:09 +0000 (11:22 -0700)]
liquidio: moved ptp_enable to octeon_device structure
ptp_enable was a global static variable. Moved this global variable to
octeon_device structure and removed extra device id check.
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
William Tu [Fri, 11 Aug 2017 13:46:39 +0000 (06:46 -0700)]
selftests: bpf: add check for ip XDP redirect
Kernel test robot reports error when running test_xdp_redirect.sh.
Check if ip tool supports xdpgeneric, if not, skip the test.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bhumika Goyal [Fri, 11 Aug 2017 13:40:42 +0000 (19:10 +0530)]
mlxsw: make mlxsw_config_profile const
Make these structures const as they only stored in the profile field of
a mlxsw_driver structure, which is of type const.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Fri, 11 Aug 2017 11:26:26 +0000 (04:26 -0700)]
openvswitch: Remove unnecessary newlines from OVS_NLERR uses
OVS_NLERR already adds a newline so these just add blank
lines to the logging.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman [Fri, 11 Aug 2017 08:25:44 +0000 (10:25 +0200)]
nfp: send control message when MAC representors are created
The firmware expects a MAC_REPR control message when a MAC representor
is created. The driver should expect a PORTMOD message to follow which
will provide the link states of the physical port associated with the MAC
representor.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tonghao Zhang [Fri, 11 Aug 2017 03:16:29 +0000 (20:16 -0700)]
net: skb_needs_check() removes CHECKSUM_UNNECESSARY check for tx.
Because we remove the UFO support, we will also remove the
CHECKSUM_UNNECESSARY check in skb_needs_check().
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Khoroshilov [Thu, 10 Aug 2017 22:55:21 +0000 (01:55 +0300)]
wan: dscc4: convert to plain DMA API
Make use the dma_*() interfaces rather than the pci_*() interfaces.
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Khoroshilov [Thu, 10 Aug 2017 22:55:20 +0000 (01:55 +0300)]
wan: dscc4: add checks for dma mapping errors
The driver does not check if mapping dma memory succeed.
The patch adds the checks and failure handling.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 10 Aug 2017 20:49:10 +0000 (13:49 -0700)]
net: ipv4: set orig_oif based on fib result for local traffic
Attempts to connect to a local address with a socket bound
to a device with the local address hangs if there is no listener:
$ ip addr sh dev eth1
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 02:e0:f9:1c:00:37 brd ff:ff:ff:ff:ff:ff
inet 10.100.1.4/24 scope global eth1
valid_lft forever preferred_lft forever
inet6 2001:db8:1::4/120 scope global
valid_lft forever preferred_lft forever
inet6 fe80::e0:f9ff:fe1c:37/64 scope link
valid_lft forever preferred_lft forever
$ vrf-test -I eth1 -r 10.100.1.4
<hangs when there is no server>
(don't let the command name fool you; vrf-test works without vrfs.)
The problem is that the original intended device, eth1 in this case, is
lost when the tcp reset is sent, so the socket lookup does not find a
match for the reset and the connect attempt hangs. Fix by adjusting
orig_oif for local traffic to the device from the fib lookup result.
With this patch you get the more user friendly:
$ vrf-test -I eth1 -r 10.100.1.4
connect failed: 111: Connection refused
orig_oif is saved to the newly created rtable as rt_iif and when set
it is used as the dif for socket lookups. It is set based on flowi4_oif
passed in to ip_route_output_key_hash_rcu and will be set to either
the loopback device, an l3mdev device, nothing (flowi4_oif = 0 which
is the case in the example above) or a netdev index depending on the
lookup path. In each case, resetting orig_oif to the device in the fib
result for the RTN_LOCAL case allows the actual device to be preserved
as the skb tx and rx is done over the loopback or VRF device.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florinel Iordache [Thu, 10 Aug 2017 13:47:04 +0000 (16:47 +0300)]
fsl/fman: implement several errata workarounds
Implemented workarounds for the following dTSEC Erratum:
A002, A004, A0012, A0014,
A004839 on several operations
that involve MAC CFG register changes: adjust link,
rx pause frames, modify MAC address.
Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 10 Aug 2017 09:56:14 +0000 (12:56 +0300)]
hns3pf: Fix some harmless copy and paste bugs
These were copy and paste bugs, but I believe they are harmless.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 10 Aug 2017 09:54:59 +0000 (12:54 +0300)]
hns3pf: fix hns3_del_tunnel_port()
This function has a copy and paste bug so it accidentally calls the add
function instead of the delete function.
Fixes:
76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 11 Aug 2017 21:28:59 +0000 (14:28 -0700)]
Merge branch 'rockchip-internal-phy'
David Wu says:
====================
rockchip: Add the integrated PHY support
The rk3228 and rk3328 support integrated PHY inside, let's enable
it to work. And the integrated PHY need to do some special setting,
so register the rockchip integrated PHY driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David Wu [Thu, 10 Aug 2017 14:02:01 +0000 (22:02 +0800)]
ARM64: dts: rockchip: Enable gmac2phy for rk3328-evb
Enable the gmac2phy, make the gmac2phy work on
the rk3328-evb board.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Wu [Thu, 10 Aug 2017 14:01:41 +0000 (22:01 +0800)]
ARM64: dts: rockchip: Add gmac2phy node support for rk3328
The gmac2phy controller of rk3328 is connected to integrated PHY
directly inside, add the node for the integrated PHY support.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Wu [Thu, 10 Aug 2017 14:01:08 +0000 (22:01 +0800)]
ARM: dts: rk3228-evb: Enable the integrated PHY for gmac
This patch enables the integrated PHY for rk3228 evb board
by default.
To use the external 1000M PHY on evb board, need to make
some switch of evb board to be on.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Wu [Thu, 10 Aug 2017 14:00:52 +0000 (22:00 +0800)]
net: stmmac: dwmac-rk: Add integrated PHY supprot for rk3328
There are two mac controllers in the rk3328, the one connects
to external PHY, and the other one connects to integrated PHY.
Like the mac of external PHY, the integrated PHY's mac also
needs to configure the related mac registers at GRF.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Wu [Thu, 10 Aug 2017 14:00:25 +0000 (22:00 +0800)]
net: stmmac: dwmac-rk: Add integrated PHY support for rk3228
There is only one mac controller in rk3228, which could connect to
external PHY or integrated PHY, use the grf_com_mux bit15 to route
external/integrated PHY.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Wu [Thu, 10 Aug 2017 14:00:02 +0000 (22:00 +0800)]
net: stmmac: dwmac-rk: Add integrated PHY support
To make integrated PHY work, need to configure the PHY clock,
PHY cru reset and related registers.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Wu [Thu, 10 Aug 2017 13:59:18 +0000 (21:59 +0800)]
Documentation: net: phy: Add phy-is-integrated binding
Add the documentation for integrated PHY. A boolean property indicates
the PHY is integrated into the same physical package as the Ethernet
MAC. If needed, muxers should be configured to ensure the integrated
PHY is used. The absence of this property indicates the muxers should
be configured so that the external PHY is used.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Wu [Thu, 10 Aug 2017 13:56:43 +0000 (21:56 +0800)]
net: stmmac: dwmac-rk: Remove unwanted code for rk3328_set_to_rmii()
This is wrong setting for rk3328_set_to_rmii(), so remove it.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Wu [Thu, 10 Aug 2017 13:56:42 +0000 (21:56 +0800)]
arm64: defconfig: Enable CONFIG_ROCKCHIP_PHY
Make the rockchip PHY driver built into the kernel.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Wu [Thu, 10 Aug 2017 13:56:41 +0000 (21:56 +0800)]
multi_v7_defconfig: Make rockchip PHY built-in
Enable the rockchip PHY driver for multi_v7_defconfig builds.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Wu [Thu, 10 Aug 2017 13:56:40 +0000 (21:56 +0800)]
net: phy: Add rockchip PHY driver support
Support integrated ethernet PHY currently.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhu Yanjun [Thu, 10 Aug 2017 08:13:12 +0000 (04:13 -0400)]
forcedeth: replace init_timer_deferrable with setup_deferrable_timer
Replace init_timer_deferrable with setup_deferrable_timer to simplify
the source code.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxim Uvarov [Thu, 10 Aug 2017 07:47:47 +0000 (10:47 +0300)]
drivers: net: davinci_mdio: print bus frequency
Frequency can be adjusted in DT it make sense to
print current used value on driver init.
Signed-off-by: Max Uvarov <muvarov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxim Uvarov [Thu, 10 Aug 2017 07:47:46 +0000 (10:47 +0300)]
drivers: net: davinci_mdio: remove busy loop on wait user access
Polling 14 mdio devices on single mdio bus eats 30% of 1Ghz cpu time
due to busy loop in wait(). Add small delay to relax cpu.
Signed-off-by: Max Uvarov <muvarov@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 11 Aug 2017 21:00:14 +0000 (14:00 -0700)]
Merge branch 'netvsc-minor-fixes-and-improvements'
Stephen Hemminger says:
====================
netvsc: minor fixes and improvements
These are non-critical bug fixes, related to functionality now in net-next.
1. delaying the automatic bring up of VF device to allow udev to change name.
2. performance improvement
3. handle MAC address change with VF; mostly propogate the error that VF gives.
4. minor cleanups
5. allow setting send/receive buffer size with ethtool.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Thu, 10 Aug 2017 00:46:12 +0000 (17:46 -0700)]
netvsc: keep track of some non-fatal overload conditions
Add ethtool statistics for case where send chimmeny buffer is
exhausted and driver has to fall back to doing scatter/gather
send. Also, add statistic for case where ring buffer is full and
receive completions are delayed.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Thu, 10 Aug 2017 00:46:11 +0000 (17:46 -0700)]
netvsc: allow controlling send/recv buffer size
Control the size of the buffer areas via ethtool ring settings.
They aren't really traditional hardware rings, but host API breaks
receive and send buffer into chunks. The final size of the chunks are
controlled by the host.
The default value of send and receive buffer area for host DMA
is much larger than it needs to be. Experimentation shows that
4M receive and 1M send is sufficient.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Thu, 10 Aug 2017 00:46:10 +0000 (17:46 -0700)]
netvsc: remove unnecessary check for NULL hdr
The function init_page_array is always called with a valid pointer
to RNDIS header. No check for NULL is needed.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Thu, 10 Aug 2017 00:46:09 +0000 (17:46 -0700)]
netvsc: remove unnecessary cast of void pointer
Assignment to a typed pointer is sufficient in C.
No cast is needed.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Thu, 10 Aug 2017 00:46:08 +0000 (17:46 -0700)]
netvsc: whitespace cleanup
Fix some minor indentation issues.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Thu, 10 Aug 2017 00:46:07 +0000 (17:46 -0700)]
netvsc: no need to allocate send/receive on numa node
The send and receive buffers are both per-device (not per-channel).
The associated NUMA node is a property of the CPU which is per-channel
therefore it makes no sense to force the receive/send buffer to be
allocated on a particular node (since it is a shared resource).
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Thu, 10 Aug 2017 00:46:06 +0000 (17:46 -0700)]
netvsc: check error return when restoring channels and mtu
If setting new values fails, and the attempt to restore original
settings fails. Then log an error and leave device down.
This should never happen, but if it does don't go down in flames.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Thu, 10 Aug 2017 00:46:05 +0000 (17:46 -0700)]
netvsc: propagate MAC address change to VF slave
If VF is slaved to synthetic device, then any change to netvsc
MAC address should be propagated to the slave device.
If slave device doesn't support MAC address change then it
should also be an error to attempt to change synthetic NIC MAC
address.
It also fixes the error unwind in the original code.
If give a bad address, the old code would change the device
MAC address anyway.
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Thu, 10 Aug 2017 00:46:04 +0000 (17:46 -0700)]
netvsc: don't signal host twice if empty
When hv_pkt_iter_next() returns NULL, it has already called
hv_pkt_iter_close(). Calling it twice can lead to extra host signal.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Thu, 10 Aug 2017 00:46:03 +0000 (17:46 -0700)]
netvsc: delay setup of VF device
When VF device is discovered, delay bring it automatically up in
order to allow userspace to some simple changes (like renaming).
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Wed, 9 Aug 2017 21:35:50 +0000 (00:35 +0300)]
phylink: Fix an uninitialized variable bug
"ret" isn't necessarily initialized here.
Fixes:
9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Wed, 9 Aug 2017 20:28:04 +0000 (13:28 -0700)]
liquidio: removed check for queue size alignment
There is no restriction on queue size alignment. Hence removing check for
valid queue size.
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Wed, 9 Aug 2017 19:07:08 +0000 (12:07 -0700)]
liquidio: rx/tx queue cleanup
When deleting a queue, clear its corresponding bit in the qmask, vfree its
memory, clear out the pointer that's pointing to it, and decrement the
queue count.
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <fmanlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 11 Aug 2017 20:47:01 +0000 (13:47 -0700)]
Merge branch 'net-sched-let-the-offloader-decide-what-to-offload'
Jiri Pirko says:
====================
net: sched: let the offloader decide what to offload
Currently there is a Qdisc_class_ops->tcf_cl_offload callback
that is called to find out if cls would offload rule or not.
This is only supported by sch_ingress and sch_clsact.
So the Qdisc are to decide. However, the driver knows what is he
able to offload, so move the decision making to drivers completely.
Just pass classid there and provide set of helpers to allow
identification of qdisc.
As a side effect, this actually allows clsact egress rules
offload in mlxsw.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Wed, 9 Aug 2017 12:30:35 +0000 (14:30 +0200)]
net: sched: remove cops->tcf_cl_offload
cops->tcf_cl_offload is no longer needed, as the drivers check what they
can and cannot offload using the classid identify helpers. So remove this.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Wed, 9 Aug 2017 12:30:34 +0000 (14:30 +0200)]
net: sched: remove handle propagation down to the drivers
There is no longer need to use handle in drivers, so remove it from
tc_cls_common_offload struct.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Wed, 9 Aug 2017 12:30:33 +0000 (14:30 +0200)]
net: sched: use newly added classid identity helpers
Instead of checking handle, which does not have the inner class
information and drivers wrongly assume clsact->egress as ingress, use
the newly introduced classid identification helpers.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Wed, 9 Aug 2017 12:30:32 +0000 (14:30 +0200)]
net: sched: propagate classid down to offload drivers
Drivers need classid to decide they support this specific qdisc+class
or not. So propagate it down via the tc_cls_common_offload struct.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Wed, 9 Aug 2017 12:30:31 +0000 (14:30 +0200)]
net: sched: Add helpers to identify classids
Offloading drivers need to understand what qdisc class a filter is added
to. Currently they only need to identify ingress, clsact->ingress and
clsact->egress. So provide these helpers.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Girish Moodalbail [Wed, 9 Aug 2017 08:09:28 +0000 (01:09 -0700)]
geneve: use netlink_ext_ack for error reporting in rtnl operations
Add extack error messages for failure paths while creating/modifying
geneve devices. Once extack support is added to iproute2, more
meaningful and helpful error messages will be displayed making it easy
for users to discern what went wrong.
Before:
=======
$ ip link add gen1 address 0:1:2:3:4:5:6 type geneve id 200 \
remote 192.168.13.2
RTNETLINK answers: Invalid argument
After:
======
$ ip link add gen1 address 0:1:2:3:4:5:6 type geneve id 200 \
remote 192.168.13.2
Error: Provided link layer address is not Ethernet
Also, netdev_dbg() calls used to log errors associated with Netlink
request have been removed.
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 11 Aug 2017 17:02:45 +0000 (10:02 -0700)]
Merge branch 'sctp-remove-typedefs-from-structures-part-6'
Xin Long says:
====================
sctp: remove typedefs from structures part 6
As we know, typedef is suggested not to use in kernel, even checkpatch.pl
also gives warnings about it. Now sctp is using it for many structures.
All this kind of typedef's using should be removed. This patchset is the
part 6 to remove all typedefs in include/net/sctp/structs.h, command.h
and sm.h.
Just as the part 1-5, No any code's logic would be changed in these patches,
only cleaning up.
Note that this is the last part for this typedef cleaning up. after this
patchset, no more inappropriate typedefs in sctp. It's also to tidy some
codes when removing them, like fixing many indents, reodering some local
params, especially in the last 2 patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 11 Aug 2017 02:23:58 +0000 (10:23 +0800)]
sctp: fix some indents in sm_make_chunk.c
There are some bad indents of functions' defination in sm_make_chunk.c.
They have been there since beginning, it was probably caused by that
the typedef sctp_chunk_t was replaced with struct sctp_chunk.
So it's the best time to fix them in this patchset, it's also to fix
some bad indents in other functions' defination in sm_make_chunk.c.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 11 Aug 2017 02:23:57 +0000 (10:23 +0800)]
sctp: remove the typedef sctp_disposition_t
This patch is to remove the typedef sctp_disposition_t, and
replace with enum sctp_disposition in the places where it's
using this typedef.
It's also to fix the indent for many functions' defination.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 11 Aug 2017 02:23:56 +0000 (10:23 +0800)]
sctp: remove the typedef sctp_sm_table_entry_t
This patch is to remove the typedef sctp_sm_table_entry_t, and
replace with struct sctp_sm_table_entry in the places where it's
using this typedef.
It is also to fix some indents.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 11 Aug 2017 02:23:55 +0000 (10:23 +0800)]
sctp: remove the unused typedef sctp_sm_command_t
Remove this typedef including the struct, there is even no places
using it.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 11 Aug 2017 02:23:54 +0000 (10:23 +0800)]
sctp: remove the typedef sctp_verb_t
This patch is to remove the typedef sctp_verb_t, and
replace with enum sctp_verb in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 11 Aug 2017 02:23:53 +0000 (10:23 +0800)]
sctp: remove the typedef sctp_arg_t
This patch is to remove the typedef sctp_arg_t, and
replace with union sctp_arg in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 11 Aug 2017 02:23:52 +0000 (10:23 +0800)]
sctp: remove the typedef sctp_cmd_seq_t
This patch is to remove the typedef sctp_cmd_seq_t, and
replace with struct sctp_cmd_seq in the places where it's
using this typedef.
Note that it doesn't fix many indents although it should,
as sctp_disposition_t's removal would mess them up again.
So better to fix them when removing sctp_disposition_t in
the later patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 11 Aug 2017 02:23:51 +0000 (10:23 +0800)]
sctp: remove the typedef sctp_cmd_t
This patch is to remove the typedef sctp_cmd_t, and
replace with enum sctp_cmd in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 11 Aug 2017 02:23:50 +0000 (10:23 +0800)]
sctp: remove the typedef sctp_socket_type_t
This patch is to remove the typedef sctp_socket_type_t, and
replace with enum sctp_socket_type in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 11 Aug 2017 02:23:49 +0000 (10:23 +0800)]
sctp: remove the typedef sctp_dbg_objcnt_entry_t
This patch is to remove the typedef sctp_dbg_objcnt_entry_t, and
replace with struct sctp_dbg_objcnt_entry in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 11 Aug 2017 02:23:48 +0000 (10:23 +0800)]
sctp: remove the typedef sctp_cmsgs_t
This patch is to remove the typedef sctp_cmsgs_t, and
replace with struct sctp_cmsgs in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 11 Aug 2017 02:23:47 +0000 (10:23 +0800)]
sctp: remove the typedef sctp_endpoint_type_t
This patch is to remove the typedef sctp_endpoint_type_t, and
replace with enum sctp_endpoint_type in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 11 Aug 2017 02:23:46 +0000 (10:23 +0800)]
sctp: remove the typedef sctp_sender_hb_info_t
This patch is to remove the typedef sctp_sender_hb_info_t, and
replace with struct sctp_sender_hb_info in the places where it's
using this typedef.
It is also to use sizeof(variable) instead of sizeof(type).
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 11 Aug 2017 02:23:45 +0000 (10:23 +0800)]
sctp: remove the unused typedef sctp_packet_phandler_t
Remove this function typedef, there is even no places
using it.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 10 Aug 2017 19:11:16 +0000 (12:11 -0700)]
Merge git://git./linux/kernel/git/davem/net
Mainline had UFO fixes, but UFO is removed in net-next so we
take the HEAD hunks.
Minor context conflict in bcmsysport statistics bug fix.
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 10 Aug 2017 17:30:29 +0000 (10:30 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix handling of initial STATE message in TIPC, from Jon Paul Maloy.
2) Fix stats handling in bcm_sysport_get_stats(), from Florian
Fainelli.
3) Reject
16777215 VNI value in geneve_validate(), from Girish
Moodalbail.
4) Fix initial IGMP sysctl setting regression, from Nikolay Borisov.
5) Once a UFO fragmented frame is treated as UFO, we should continue
doing so. Likewise once a frame has been segmented, we should
continue doing that and not try to convert it to a UFO frame. From
Willem de Bruijn.
6) Test the AF_PACKET RX/TX ring pg_vec state under the socket lock to
prevent races. From Willem de Bruijn.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
packet: fix tp_reserve race in packet_set_ring
udp: consistently apply ufo or fragmentation
net: sched: set xt_tgchk_param par.nft_compat as 0 in ipt_init_target
igmp: Fix regression caused by igmp sysctl namespace code.
geneve: maximum value of VNI cannot be used
net: systemport: Fix software statistics for SYSTEMPORT Lite
tipc: remove premature ESTABLISH FSM event at link synchronization
Willem de Bruijn [Thu, 10 Aug 2017 16:41:58 +0000 (12:41 -0400)]
packet: fix tp_reserve race in packet_set_ring
Updates to tp_reserve can race with reads of the field in
packet_set_ring. Avoid this by holding the socket lock during
updates in setsockopt PACKET_RESERVE.
This bug was discovered by syzkaller.
Fixes:
8913336a7e8d ("packet: add PACKET_RESERVE sockopt")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 10 Aug 2017 16:29:19 +0000 (12:29 -0400)]
udp: consistently apply ufo or fragmentation
When iteratively building a UDP datagram with MSG_MORE and that
datagram exceeds MTU, consistently choose UFO or fragmentation.
Once skb_is_gso, always apply ufo. Conversely, once a datagram is
split across multiple skbs, do not consider ufo.
Sendpage already maintains the first invariant, only add the second.
IPv6 does not have a sendpage implementation to modify.
A gso skb must have a partial checksum, do not follow sk_no_check_tx
in udp_send_skb.
Found by syzkaller.
Fixes:
e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 10 Aug 2017 16:50:22 +0000 (09:50 -0700)]
Merge branch 'rtnetlink-fix-initial-rtnl-pushdown-fallout'
Florian Westphal says:
====================
rtnetlink: fix initial rtnl pushdown fallout
This series fixes various bugs and splats reported since the
allow-handler-to-run-with-no-rtnl series went in.
Last patch adds a script that can be used to add further
tests in case more bugs are reported.
In case you prefer reverting the original series instead of
fixing fallout I can resend this patch on its own.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Thu, 10 Aug 2017 14:53:02 +0000 (16:53 +0200)]
selftests: add rtnetlink test script
add a simple script to exercise some rtnetlink call paths, so KASAN,
lockdep etc. can yell at developer before patches are sent upstream.
This can be extended to also cover bond, team, vrf and the like.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Thu, 10 Aug 2017 14:53:01 +0000 (16:53 +0200)]
rtnetlink: fallback to UNSPEC if current family has no doit callback
We need to use PF_UNSPEC in case the requested family has no doit
callback, otherwise this now fails with EOPNOTSUPP instead of running the
unspec doit callback, as before.
Fixes:
6853dd488119 ("rtnetlink: protect handler table with rcu")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Thu, 10 Aug 2017 14:53:00 +0000 (16:53 +0200)]
rtnetlink: init handler refcounts to 1
If using CONFIG_REFCOUNT_FULL=y we get following splat:
refcount_t: increment on 0; use-after-free.
WARNING: CPU: 0 PID: 304 at lib/refcount.c:152 refcount_inc+0x47/0x50
Call Trace:
rtnetlink_rcv_msg+0x191/0x260
...
This warning is harmless (0 is "no callback running", not "memory
was freed").
Use '1' as the new 'no handler is running' base instead of 0 to avoid
this.
Fixes:
019a316992ee ("rtnetlink: add reference counting to prevent module unload while dump is in progress")
Reported-by: Sabrina Dubroca <sdubroca@redhat.com>
Reported-by: kernel test robot <fengguang.wu@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Thu, 10 Aug 2017 14:52:59 +0000 (16:52 +0200)]
rtnetlink: switch rtnl_link_get_slave_info_data_size to rcu
David Ahern reports following splat:
RTNL: assertion failed at net/core/dev.c (5717)
netdev_master_upper_dev_get+0x5f/0x70
if_nlmsg_size+0x158/0x240
rtnl_calcit.isra.26+0xa3/0xf0
rtnl_link_get_slave_info_data_size currently assumes RTNL protection, but
there appears to be no hard requirement for this, so use rcu instead.
At the time of this writing, there are three 'get_slave_size' callbacks
(now invoked under rcu): bond_get_slave_size, vrf_get_slave_size and
br_port_get_slave_size, all return constant only (i.e. they don't sleep).
Fixes:
6853dd488119 ("rtnetlink: protect handler table with rcu")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Thu, 10 Aug 2017 14:52:58 +0000 (16:52 +0200)]
rtnetlink: do not use RTM_GETLINK directly
Userspace sends RTM_GETLINK type, but the kernel substracts
RTM_BASE from this, i.e. 'type' doesn't contain RTM_GETLINK
anymore but instead RTM_GETLINK - RTM_BASE.
This caused the calcit callback to not be invoked when it
should have been (and vice versa).
While at it, also fix a off-by one when checking family index. vs
handler array size.
Fixes:
e1fa6d216dd ("rtnetlink: call rtnl_calcit directly")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Thu, 10 Aug 2017 14:52:57 +0000 (16:52 +0200)]
rtnetlink: use rcu_dereference_raw to silence rcu splat
Ido reports a rcu splat in __rtnl_register.
The splat is correct; as rtnl_register doesn't grab any logs
and doesn't use rcu locks either. It has always been like this.
handler families are not registered in parallel so there are no
races wrt. the kmalloc ordering.
The only reason to use rcu_dereference in the first place was to
avoid sparse from complaining about this.
Thus this switches to _raw() to not have rcu checks here.
The alternative is to add rtnl locking to register/unregister,
however, I don't see a compelling reason to do so as this has been
lockless for the past twenty years or so.
Fixes:
6853dd4881 ("rtnetlink: protect handler table with rcu")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 10 Aug 2017 16:36:06 +0000 (09:36 -0700)]
Merge git://git./linux/kernel/git/davem/sparc
Pull sparc updates from David Miller:
1) Recognize M8 cpus, just basic chip ID matching, from Allen Pais.
2) Prevent crashes when bringing up sunvdc virtual block devices in
some environments. From Jim Quigley.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sunvdc: prevent sunvdc panic when mpgroup disk added to guest domain
sparc64: Increase max_phys_bits to 51 and VA bits to 53 for M8.
sparc64: recognize and support sparc M8 cpu type
sparc64: properly name the cpu constants
John Crispin [Thu, 10 Aug 2017 08:09:03 +0000 (10:09 +0200)]
net: core: fix compile error inside flow_dissector due to new dsa callback
The following error was introduced by
commit
43e665287f93 ("net-next: dsa: fix flow dissection")
due to a missing #if guard
net/core/flow_dissector.c: In function '__skb_flow_dissect':
net/core/flow_dissector.c:448:18: error: 'struct net_device' has no member named 'dsa_ptr'
ops = skb->dev->dsa_ptr->tag_ops;
^
make[3]: *** [net/core/flow_dissector.o] Error 1
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 10 Aug 2017 05:51:47 +0000 (22:51 -0700)]
Merge branch 'dsa-flow-dissection'
John Crispin says:
====================
net-next: dsa: fix flow dissection
RPS and probably other kernel features are currently broken on some if not
all DSA devices. The root cause of this is that skb_hash will call the
flow_dissector. At this point the skb still contains the magic switch
header and the skb->protocol field is not set up to the correct 802.3
value yet. By the time the tag specific code is called, removing the header
and properly setting the protocol an invalid hash is already set. In the
case of the mt7530 this will result in all flows always having the same
hash.
Changes since RFC:
* use a callback instead of static values
* add cover letter
====================
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Crispin [Wed, 9 Aug 2017 12:41:19 +0000 (14:41 +0200)]
net-next: dsa: fix flow dissection
RPS and probably other kernel features are currently broken on some if not
all DSA devices. The root cause of this is that skb_hash will call the
flow_dissector. At this point the skb still contains the magic switch
header and the skb->protocol field is not set up to the correct 802.3
value yet. By the time the tag specific code is called, removing the header
and properly setting the protocol an invalid hash is already set. In the
case of the mt7530 this will result in all flows always having the same
hash.
Signed-off-by: Muciri Gatimu <muciri@openmesh.com>
Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
Signed-off-by: John Crispin <john@phrozen.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Crispin [Wed, 9 Aug 2017 12:41:18 +0000 (14:41 +0200)]
net-next: tag_mtk: add flow_dissect callback to the ops struct
The MT7530 inserts the 4 magic header in between the 802.3 address and
protocol field. The patch implements the callback that can be called by
the flow dissector to figure out the real protocol and offset of the
network header. With this patch applied we can properly parse the packet
and thus make hashing function properly.
Signed-off-by: Muciri Gatimu <muciri@openmesh.com>
Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
Signed-off-by: John Crispin <john@phrozen.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Crispin [Wed, 9 Aug 2017 12:41:17 +0000 (14:41 +0200)]
net-next: dsa: add flow_dissect callback to struct dsa_device_ops
When the flow dissector first sees packets coming in on a DSA devices the
802.3 header wont be located where the code expects it to be as the tag
is still present. Adding this new callback allows a DSA device to provide a
new function that the flow_dissector can use to get the correct protocol
and offset of the network header.
Signed-off-by: Muciri Gatimu <muciri@openmesh.com>
Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
Signed-off-by: John Crispin <john@phrozen.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Crispin [Wed, 9 Aug 2017 12:41:16 +0000 (14:41 +0200)]
net-next: dsa: move struct dsa_device_ops to the global header file
We need to access this struct from within the flow_dissector to fix
dissection for packets coming in on DSA devices.
Signed-off-by: Muciri Gatimu <muciri@openmesh.com>
Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 9 Aug 2017 10:15:19 +0000 (18:15 +0800)]
net: sched: set xt_tgchk_param par.nft_compat as 0 in ipt_init_target
Commit
55917a21d0cc ("netfilter: x_tables: add context to know if
extension runs from nft_compat") introduced a member nft_compat to
xt_tgchk_param structure.
But it didn't set it's value for ipt_init_target. With unexpected
value in par.nft_compat, it may return unexpected result in some
target's checkentry.
This patch is to set all it's fields as 0 and only initialize the
non-zero fields in ipt_init_target.
v1->v2:
As Wang Cong's suggestion, fix it by setting all it's fields as
0 and only initializing the non-zero fields.
Fixes:
55917a21d0cc ("netfilter: x_tables: add context to know if extension runs from nft_compat")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Borisov [Wed, 9 Aug 2017 11:38:04 +0000 (14:38 +0300)]
igmp: Fix regression caused by igmp sysctl namespace code.
Commit
dcd87999d415 ("igmp: net: Move igmp namespace init to correct file")
moved the igmp sysctls initialization from tcp_sk_init to igmp_net_init. This
function is only called as part of per-namespace initialization, only if
CONFIG_IP_MULTICAST is defined, otherwise igmp_mc_init() call in ip_init is
compiled out, casuing the igmp pernet ops to not be registerd and those sysctl
being left initialized with 0. However, there are certain functions, such as
ip_mc_join_group which are always compiled and make use of some of those
sysctls. Let's do a partial revert of the aforementioned commit and move the
sysctl initialization into inet_init_net, that way they will always have
sane values.
Fixes:
dcd87999d415 ("igmp: net: Move igmp namespace init to correct file")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196595
Reported-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 10 Aug 2017 05:45:36 +0000 (22:45 -0700)]
Merge branch 'mediatek-bring-up-QDMA-RX-ring-0'
John Crispin says:
====================
net-next: mediatek: bring up QDMA RX ring 0
The MT7623 has several DMA rings. Inside the SW path, the core will use
the PDMA when receiving traffic. While bringing up the HW path we noticed
that the PPE requires the QDMA RX to also be brought up as it uses this
ring internally for its flow scheduling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
John Crispin [Wed, 9 Aug 2017 10:09:32 +0000 (12:09 +0200)]
net-next: mediatek: bring up QDMA RX ring 0
This patch is in preparation for adding HW flow and QoS offloading. For
those features to work, the driver needs to bring up the first QDMA RX
ring. This ring is used by the PPE offloading HW.
Signed-off-by: John Crisp in <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Crispin [Wed, 9 Aug 2017 10:09:31 +0000 (12:09 +0200)]
net-next: mediatek: fix typos inside the header file
Trivial patch fixing 2 typos.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bhumika Goyal [Wed, 9 Aug 2017 09:32:08 +0000 (15:02 +0530)]
net: atm: make atmdev_ops const
Make these const as they are only stored in the ops field of a atm_dev
structure, which is const.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bhumika Goyal [Wed, 9 Aug 2017 09:19:15 +0000 (14:49 +0530)]
atm: make atmdev_ops const
Make these structures const as they are either passed to the function
atm_dev_register having the corresponding argument as const or stored in
the ops field of a atm_dev structure, which is also const.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bhumika Goyal [Wed, 9 Aug 2017 05:04:15 +0000 (10:34 +0530)]
net: dsa: make dsa_switch_ops const
Make these structures const as they are only stored in the ops field of
a dsa_switch structure, which is const.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Wed, 9 Aug 2017 02:34:28 +0000 (19:34 -0700)]
liquidio: napi cleanup
Disable napi when interface is going down.
Delete napi when destroying the interface.
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Girish Moodalbail [Wed, 9 Aug 2017 00:26:24 +0000 (17:26 -0700)]
geneve: maximum value of VNI cannot be used
Geneve's Virtual Network Identifier (VNI) is 24 bit long, so the range
of values for it would be from 0 to
16777215 (2^24 -1). However, one
cannot create a geneve device with VNI set to
16777215. This patch fixes
this issue.
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 8 Aug 2017 21:51:02 +0000 (15:51 -0600)]
net: ipv6: lower ndisc notifier priority below addrconf
ndisc_notify is used to send unsolicited neighbor advertisements
(e.g., on a link up). Currently, the ndisc notifier is run before the
addrconf notifer which means NA's are not sent for link-local addresses
which are added by the addrconf notifier.
Fix by lowering the priority of the ndisc notifier. Setting the priority
to ADDRCONF_NOTIFY_PRIORITY - 5 means it runs after addrconf and before
the route notifier which is ADDRCONF_NOTIFY_PRIORITY - 10.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 8 Aug 2017 21:45:09 +0000 (14:45 -0700)]
net: systemport: Fix software statistics for SYSTEMPORT Lite
With SYSTEMPORT Lite we have holes in our statistics layout that make us
skip over the hardware MIB counters, bcm_sysport_get_stats() was not
taking that into account resulting in reporting 0 for all SW-maintained
statistics, fix this by skipping accordingly.
Fixes:
44a4524c54af ("net: systemport: Add support for SYSTEMPORT Lite")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Tue, 8 Aug 2017 20:23:56 +0000 (22:23 +0200)]
tipc: remove premature ESTABLISH FSM event at link synchronization
When a link between two nodes come up, both endpoints will initially
send out a STATE message to the peer, to increase the probability that
the peer endpoint also is up when the first traffic message arrives.
Thereafter, if the establishing link is the second link between two
nodes, this first "traffic" message is a TUNNEL_PROTOCOL/SYNCH message,
helping the peer to perform initial synchronization between the two
links.
However, the initial STATE message may be lost, in which case the SYNCH
message will be the first one arriving at the peer. This should also
work, as the SYNCH message itself will be used to take up the link
endpoint before initializing synchronization.
Unfortunately the code for this case is broken. Currently, the link is
brought up through a tipc_link_fsm_evt(ESTABLISHED) when a SYNCH
arrives, whereupon __tipc_node_link_up() is called to distribute the
link slots and take the link into traffic. But, __tipc_node_link_up() is
itself starting with a test for whether the link is up, and if true,
returns without action. Clearly, the tipc_link_fsm_evt(ESTABLISHED) call
is unnecessary, since tipc_node_link_up() is itself issuing such an
event, but also harmful, since it inhibits tipc_node_link_up() to
perform the test of its tasks, and the link endpoint in question hence
is never taken into traffic.
This problem has been exposed when we set up dual links between pre-
and post-4.4 kernels, because the former ones don't send out the
initial STATE message described above.
We fix this by removing the unnecessary event call.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Fontenot [Tue, 8 Aug 2017 20:26:18 +0000 (15:26 -0500)]
ibmvnic: Correct 'unused variable' warning in build.
Commit
a248878d7a1d ("ibmvnic: Check for transport event on driver resume")
removed the loop to kick irqs on driver resume but didn't remove the now
unused loop variable 'i'.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Fontenot [Tue, 8 Aug 2017 20:24:05 +0000 (15:24 -0500)]
ibmvnic: Add netdev_dbg output for debugging
To ease debugging of the ibmvnic driver add a series of netdev_dbg()
statements to track driver status, especially during initialization,
removal, and resetting of the driver.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Fontenot [Tue, 8 Aug 2017 19:28:45 +0000 (14:28 -0500)]
ibmvnic: Clean up resources on probe failure
Ensure that any resources allocated during probe are released if the
probe of the driver fails.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jim Quigley [Fri, 21 Jul 2017 13:20:15 +0000 (09:20 -0400)]
sunvdc: prevent sunvdc panic when mpgroup disk added to guest domain
Using mpgroup to define multiple paths for a virtual disk causes multiple
virtual-device-port ports to be created for that virtual device.
Each virtual-device-port port then gets a vdisk created for it by the Linux
sunvdc driver. As mpgroup is not supported by the Linux sunvdc driver it
cannot handle multiple ports for a single vdisk, leading to a kernel panic
at startup.
This fix prevents more than one vdisk per virtual-device-port being created
until full virtual disk multipathing (mpgroup) support is implemented.
Signed-off-by: Jim Quigley <Jim.Quigley@oracle.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Aaron Young <aaron.young@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>