OSDN Git Service
Matthieu Baerts [Thu, 8 Jun 2023 16:38:43 +0000 (18:38 +0200)]
selftests: mptcp: lib: skip if missing symbol
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
New functions are now available to easily detect if a certain feature is
missing by looking at kallsyms.
These new helpers are going to be used in the following commits. In
order to ease the backport of such future patches, it would be good if
this patch is backported up to the introduction of MPTCP selftests,
hence the Fixes tag below: this type of check was supposed to be done
from the beginning.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
048d19d444be ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lee Jones [Thu, 8 Jun 2023 07:29:03 +0000 (08:29 +0100)]
net/sched: cls_u32: Fix reference counter leak leading to overflow
In the event of a failure in tcf_change_indev(), u32_set_parms() will
immediately return without decrementing the recently incremented
reference counter. If this happens enough times, the counter will
rollover and the reference freed, leading to a double free which can be
used to do 'bad things'.
In order to prevent this, move the point of possible failure above the
point where the reference counter is incremented. Also save any
meaningful return values to be applied to the return data at the
appropriate point in time.
This issue was caught with KASAN.
Fixes:
705c7091262d ("net: sched: cls_u32: no need to call tcf_exts_change for newly allocated struct")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao [Thu, 8 Jun 2023 06:27:56 +0000 (14:27 +0800)]
net/sched: taprio: fix slab-out-of-bounds Read in taprio_dequeue_from_txq
As shown in [1], out-of-bounds access occurs in two cases:
1)when the qdisc of the taprio type is used to replace the previously
configured taprio, count and offset in tc_to_txq can be set to 0. In this
case, the value of *txq in taprio_next_tc_txq() will increases
continuously. When the number of accessed queues exceeds the number of
queues on the device, out-of-bounds access occurs.
2)When packets are dequeued, taprio can be deleted. In this case, the tc
rule of dev is cleared. The count and offset values are also set to 0. In
this case, out-of-bounds access is also caused.
Now the restriction on the queue number is added.
[1] https://groups.google.com/g/syzkaller-bugs/c/_lYOKgkBVMg
Fixes:
2f530df76c8c ("net/sched: taprio: give higher priority to higher TCs in software dequeue mode")
Reported-by: syzbot+04afcb3d2c840447559a@syzkaller.appspotmail.com
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ratheesh Kannoth [Thu, 8 Jun 2023 05:16:25 +0000 (10:46 +0530)]
octeontx2-af: Fix promiscuous mode
CN10KB silicon introduced a new exact match feature,
which is used for DMAC filtering. The state of installed
DMAC filters in this exact match table is getting corrupted
when promiscuous mode is toggled. Fix this by not touching
Exact match related config when promiscuous mode is toggled.
Fixes:
2dba9459d2c9 ("octeontx2-af: Wrapper functions for MAC addr add/del/update/reset")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yoshihiro Shimoda [Thu, 8 Jun 2023 01:57:27 +0000 (10:57 +0900)]
net: renesas: rswitch: Fix timestamp feature after all descriptors are used
The timestamp descriptors were intended to act cyclically. Descriptors
from index 0 through gq->ring_size - 1 contain actual information, and
the last index (gq->ring_size) should have LINKFIX to indicate
the first index 0 descriptor. However, the LINKFIX value is missing,
causing the timestamp feature to stop after all descriptors are used.
To resolve this issue, set the LINKFIX to the timestamp descritors.
Reported-by: Phong Hoang <phong.hoang.wz@renesas.com>
Fixes:
33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Max Tottenham [Wed, 7 Jun 2023 16:23:54 +0000 (12:23 -0400)]
net/sched: act_pedit: Parse L3 Header for L4 offset
Instead of relying on skb->transport_header being set correctly, opt
instead to parse the L3 header length out of the L3 headers for both
IPv4/IPv6 when the Extended Layer Op for tcp/udp is used. This fixes a
bug if GRO is disabled, when GRO is disabled skb->transport_header is
set by __netif_receive_skb_core() to point to the L3 header, it's later
fixed by the upper protocol layers, but act_pedit will receive the SKB
before the fixups are completed. The existing behavior causes the
following to edit the L3 header if GRO is disabled instead of the UDP
header:
tc filter add dev eth0 ingress protocol ip flower ip_proto udp \
dst_ip 192.168.1.3 action pedit ex munge udp set dport 18053
Also re-introduce a rate-limited warning if we were unable to extract
the header offset when using the 'ex' interface.
Fixes:
71d0ed7079df ("net/act_pedit: Support using offset relative to
the conventional network headers")
Signed-off-by: Max Tottenham <mtottenh@akamai.com>
Reviewed-by: Josh Hunt <johunt@akamai.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202305261541.N165u9TZ-lkp@intel.com/
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wes Huang [Thu, 8 Jun 2023 03:01:42 +0000 (11:01 +0800)]
net: usb: qmi_wwan: add support for Compal RXM-G1
Add support for Compal RXM-G1 which is based on Qualcomm SDX55 chip.
This patch adds support for two compositions:
0x9091: DIAG + MODEM + QMI_RMNET + ADB
0x90db: DIAG + DUN + RMNET + DPL + QDSS(Trace) + ADB
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=05c6 ProdID=9091 Rev= 4.14
S: Manufacturer=QCOM
S: Product=SDXPRAIRIE-MTP _SN:
719AB680
S: SerialNumber=
719ab680
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=05c6 ProdID=90db Rev= 4.14
S: Manufacturer=QCOM
S: Product=SDXPRAIRIE-MTP _SN:
719AB680
S: SerialNumber=
719ab680
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=8f(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
Cc: stable@vger.kernel.org
Signed-off-by: Wes Huang <wes.huang@moxa.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20230608030141.3546-1-wes.huang@moxa.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yuezhen Luan [Wed, 7 Jun 2023 16:41:16 +0000 (09:41 -0700)]
igb: Fix extts capture value format for 82580/i354/i350
82580/i354/i350 features circle-counter-like timestamp registers
that are different with newer i210. The EXTTS capture value in
AUXTSMPx should be converted from raw circle counter value to
timestamp value in resolution of 1 nanosec by the driver.
This issue can be reproduced on i350 nics, connecting an 1PPS
signal to a SDP pin, and run 'ts2phc' command to read external
1PPS timestamp value. On i210 this works fine, but on i350 the
extts is not correctly converted.
The i350/i354/82580's SYSTIM and other timestamp registers are
40bit counters, presenting time range of 2^40 ns, that means these
registers overflows every about 1099s. This causes all these regs
can't be used directly in contrast to the newer i210/i211s.
The igb driver needs to convert these raw register values to
valid time stamp format by using kernel timecounter apis for i350s
families. Here the igb_extts() just forgot to do the convert.
Fixes:
38970eac41db ("igb: support EXTTS on 82580/i354/i350")
Signed-off-by: Yuezhen Luan <eggcar.luan@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230607164116.3768175-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guillaume Nault [Wed, 7 Jun 2023 16:05:02 +0000 (18:05 +0200)]
ping6: Fix send to link-local addresses with VRF.
Ping sockets can't send packets when they're bound to a VRF master
device and the output interface is set to a slave device.
For example, when net.ipv4.ping_group_range is properly set, so that
ping6 can use ping sockets, the following kind of commands fails:
$ ip vrf exec red ping6 fe80::854:e7ff:fe88:4bf1%eth1
What happens is that sk->sk_bound_dev_if is set to the VRF master
device, but 'oif' is set to the real output device. Since both are set
but different, ping_v6_sendmsg() sees their value as inconsistent and
fails.
Fix this by allowing 'oif' to be a slave device of ->sk_bound_dev_if.
This fixes the following kselftest failure:
$ ./fcnal-test.sh -t ipv6_ping
[...]
TEST: ping out, vrf device+address bind - ns-B IPv6 LLA [FAIL]
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/
b6191f90-ffca-dbca-7d06-
88a9788def9c@alu.unizg.hr/
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Fixes:
5e457896986e ("net: ipv6: Fix ping to link-local addresses.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/6c8b53108816a8d0d5705ae37bdc5a8322b5e3d9.1686153846.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wei Fang [Wed, 7 Jun 2023 09:10:48 +0000 (17:10 +0800)]
net: enetc: correct the indexes of highest and 2nd highest TCs
For ENETC hardware, the TCs are numbered from 0 to N-1, where N
is the number of TCs. Numerically higher TC has higher priority.
It's obvious that the highest priority TC index should be N-1 and
the 2nd highest priority TC index should be N-2.
However, the previous logic uses netdev_get_prio_tc_map() to get
the indexes of highest priority and 2nd highest priority TCs, it
does not make sense and is incorrect to give a "tc" argument to
netdev_get_prio_tc_map(). So the driver may get the wrong indexes
of the two highest priotiry TCs which would lead to failed to set
the CBS for the two highest priotiry TCs.
e.g.
$ tc qdisc add dev eno0 parent root handle 100: mqprio num_tc 6 \
map 0 0 1 1 2 3 4 5 queues 1@0 1@1 1@2 1@3 2@4 2@6 hw 1
$ tc qdisc replace dev eno0 parent 100:6 cbs idleslope 100000 \
sendslope -900000 hicredit 12 locredit -113 offload 1
$ Error: Specified device failed to setup cbs hardware offload.
^^^^^
In this example, the previous logic deems the indexes of the two
highest priotiry TCs should be 3 and 2. Actually, the indexes are
5 and 4, because the number of TCs is 6. So it would be failed to
configure the CBS for the two highest priority TCs.
Fixes:
c431047c4efe ("enetc: add support Credit Based Shaper(CBS) for hardware offload")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 8 Jun 2023 16:27:19 +0000 (09:27 -0700)]
Merge tag 'net-6.4-rc6' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, wifi, netfilter, bluetooth and ebpf.
Current release - regressions:
- bpf: sockmap: avoid potential NULL dereference in
sk_psock_verdict_data_ready()
- wifi: iwlwifi: fix -Warray-bounds bug in iwl_mvm_wait_d3_notif()
- phylink: actually fix ksettings_set() ethtool call
- eth: dwmac-qcom-ethqos: fix a regression on EMAC < 3
Current release - new code bugs:
- wifi: mt76: fix possible NULL pointer dereference in
mt7996_mac_write_txwi()
Previous releases - regressions:
- netfilter: fix NULL pointer dereference in nf_confirm_cthelper
- wifi: rtw88/rtw89: correct PS calculation for SUPPORTS_DYNAMIC_PS
- openvswitch: fix upcall counter access before allocation
- bluetooth:
- fix use-after-free in hci_remove_ltk/hci_remove_irk
- fix l2cap_disconnect_req deadlock
- nic: bnxt_en: prevent kernel panic when receiving unexpected
PHC_UPDATE event
Previous releases - always broken:
- core: annotate rfs lockless accesses
- sched: fq_pie: ensure reasonable TCA_FQ_PIE_QUANTUM values
- netfilter: add null check for nla_nest_start_noflag() in
nft_dump_basechain_hook()
- bpf: fix UAF in task local storage
- ipv4: ping_group_range: allow GID from
2147483648 to
4294967294
- ipv6: rpl: fix route of death.
- tcp: gso: really support BIG TCP
- mptcp: fixes for user-space PM address advertisement
- smc: avoid to access invalid RMBs' MRs in SMCRv1 ADD LINK CONT
- can: avoid possible use-after-free when j1939_can_rx_register fails
- batman-adv: fix UaF while rescheduling delayed work
- eth: qede: fix scheduling while atomic
- eth: ice: make writes to /dev/gnssX synchronous"
* tag 'net-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacks
bnxt_en: Prevent kernel panic when receiving unexpected PHC_UPDATE event
bnxt_en: Skip firmware fatal error recovery if chip is not accessible
bnxt_en: Query default VLAN before VNIC setup on a VF
bnxt_en: Don't issue AP reset during ethtool's reset operation
bnxt_en: Fix bnxt_hwrm_update_rss_hash_cfg()
net: bcmgenet: Fix EEE implementation
eth: ixgbe: fix the wake condition
eth: bnxt: fix the wake condition
lib: cpu_rmap: Fix potential use-after-free in irq_cpu_rmap_release()
bpf: Add extra path pointer check to d_path helper
net: sched: fix possible refcount leak in tc_chain_tmplt_add()
net: sched: act_police: fix sparse errors in tcf_police_dump()
net: openvswitch: fix upcall counter access before allocation
net: sched: move rtm_tca_policy declaration to include file
ice: make writes to /dev/gnssX synchronous
net: sched: add rcu annotations around qdisc->qdisc_sleeping
rfs: annotate lockless accesses to RFS sock flow table
rfs: annotate lockless accesses to sk->sk_rxhash
virtio_net: use control_buf for coalesce params
...
Linus Torvalds [Thu, 8 Jun 2023 15:46:58 +0000 (08:46 -0700)]
Merge tag 'xfs-6.4-rc5-fixes' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Dave Chinner:
"These are a set of regression fixes discovered on recent kernels. I
was hoping to send this to you a week and half ago, but events out of
my control delayed finalising the changes until early this week.
Whilst the diffstat looks large for this stage of the merge window, a
large chunk of it comes from moving the guts of one function from one
file to another i.e. it's the same code, it is just run in a different
context where it is safe to hold a specific lock. Otherwise the
individual changes are relatively small and straigtht forward.
Summary:
- Propagate unlinked inode list corruption back up to log recovery
(regression fix)
- improve corruption detection for AGFL entries, AGFL indexes and
XEFI extents (syzkaller fuzzer oops report)
- Avoid double perag reference release (regression fix)
- Improve extent merging detection in scrub (regression fix)
- Fix a new undefined high bit shift (regression fix)
- Fix for AGF vs inode cluster buffer deadlock (regression fix)"
* tag 'xfs-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: collect errors from inodegc for unlinked inode recovery
xfs: validate block number being freed before adding to xefi
xfs: validity check agbnos on the AGFL
xfs: fix agf/agfl verification on v4 filesystems
xfs: fix double xfs_perag_rele() in xfs_filestream_pick_ag()
xfs: fix broken logic when detecting mergeable bmap records
xfs: Fix undefined behavior of shift into sign bit
xfs: fix AGF vs inode cluster buffer deadlock
xfs: defered work could create precommits
xfs: restore allocation trylock iteration
xfs: buffer pins need to hold a buffer reference
Paolo Abeni [Thu, 8 Jun 2023 08:52:48 +0000 (10:52 +0200)]
Merge branch 'bnxt_en-bug-fixes'
Michael Chan says:
====================
bnxt_en: Bug fixes
This patchset has the following fixes for bnxt_en:
1. Add missing VNIC ID parameter in the FW message when getting an
updated RSS configuration from the FW.
2. Fix a warning when doing ethtool reset on newer chips.
3. Fix VLAN issue on a VF when a default VLAN is assigned.
4. Fix a problem during DPC (Downstream Port containment) scenario.
5. Fix a NULL pointer dereference when receiving a PTP event from FW.
6. Fix VXLAN/Geneve UDP port delete/add with newer FW.
====================
Link: https://lore.kernel.org/r/20230607075409.228450-1-michael.chan@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Somnath Kotur [Wed, 7 Jun 2023 07:54:09 +0000 (00:54 -0700)]
bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacks
As per the new udp tunnel framework, drivers which need to know the
details of a port entry (i.e. port type) when it gets deleted should
use the .set_port / .unset_port callbacks.
Implementing the current .udp_tunnel_sync callback would mean that the
deleted tunnel port entry would be all zeros. This used to work on
older firmware because it would not check the input when deleting a
tunnel port. With newer firmware, the delete will now fail and
subsequent tunnel port allocation will fail as a result.
Fixes:
442a35a5a7aa ("bnxt: convert to new udp_tunnel_nic infra")
Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pavan Chebbi [Wed, 7 Jun 2023 07:54:08 +0000 (00:54 -0700)]
bnxt_en: Prevent kernel panic when receiving unexpected PHC_UPDATE event
The firmware can send PHC_RTC_UPDATE async event on a PF that may not
have PTP registered. In such a case, there will be a null pointer
deference for bp->ptp_cfg when we try to handle the event.
Fix it by not registering for this event with the firmware if !bp->ptp_cfg.
Also, check that bp->ptp_cfg is valid before proceeding when we receive
the event.
Fixes:
8bcf6f04d4a5 ("bnxt_en: Handle async event when the PHC is updated in RTC mode")
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vikas Gupta [Wed, 7 Jun 2023 07:54:07 +0000 (00:54 -0700)]
bnxt_en: Skip firmware fatal error recovery if chip is not accessible
Driver starts firmware fatal error recovery by detecting
heartbeat failure or fw reset count register changing. But
these checks are not reliable if the device is not accessible.
This can happen while DPC (Downstream Port containment) is in
progress. Skip firmware fatal recovery if pci_device_is_present()
returns false.
Fixes:
acfb50e4e773 ("bnxt_en: Add FW fatal devlink_health_reporter.")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Somnath Kotur [Wed, 7 Jun 2023 07:54:06 +0000 (00:54 -0700)]
bnxt_en: Query default VLAN before VNIC setup on a VF
We need to call bnxt_hwrm_func_qcfg() on a VF to query the default
VLAN that may be setup by the PF. If a default VLAN is enabled,
the VF cannot support VLAN acceleration on the receive side and
the VNIC must be setup to strip out the default VLAN tag. If a
default VLAN is not enabled, the VF can support VLAN acceleration
on the receive side. The VNIC should be set up to strip or not
strip the VLAN based on the RX VLAN acceleration setting.
Without this call to determine the default VLAN before calling
bnxt_setup_vnic(), the VNIC may not be set up correctly. For
example, bnxt_setup_vnic() may set up to strip the VLAN tag based
on stale default VLAN information. If RX VLAN acceleration is
not enabled, the VLAN tag will be incorrectly stripped and the
RX data path will not work correctly.
Fixes:
cf6645f8ebc6 ("bnxt_en: Add function for VF driver to query default VLAN.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sreekanth Reddy [Wed, 7 Jun 2023 07:54:05 +0000 (00:54 -0700)]
bnxt_en: Don't issue AP reset during ethtool's reset operation
Only older NIC controller's firmware uses the PROC AP reset type.
Firmware on 5731X/5741X and newer chips does not support this reset
type. When bnxt_reset() issues a series of resets, this PROC AP
reset may actually fail on these newer chips because the firmware
is not ready to accept this unsupported command yet. Avoid this
unnecessary error by skipping this reset type on chips that don't
support it.
Fixes:
7a13240e3718 ("bnxt_en: fix ethtool_reset_flags ABI violations")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pavan Chebbi [Wed, 7 Jun 2023 07:54:04 +0000 (00:54 -0700)]
bnxt_en: Fix bnxt_hwrm_update_rss_hash_cfg()
We must specify the vnic id of the vnic in the input structure of this
firmware message. Otherwise we will get an error from the firmware.
Fixes:
98a4322b70e8 ("bnxt_en: update RSS config using difference algorithm")
Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Thu, 8 Jun 2023 04:56:01 +0000 (21:56 -0700)]
Merge tag 'batadv-net-pullrequest-
20230607' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- fix a broken sync while rescheduling delayed work,
by Vladislav Efanov
* tag 'batadv-net-pullrequest-
20230607' of git://git.open-mesh.org/linux-merge:
batman-adv: Broken sync while rescheduling delayed work
====================
Link: https://lore.kernel.org/r/20230607155515.548120-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Fainelli [Tue, 6 Jun 2023 21:43:47 +0000 (14:43 -0700)]
net: bcmgenet: Fix EEE implementation
We had a number of short comings:
- EEE must be re-evaluated whenever the state machine detects a link
change as wight be switching from a link partner with EEE
enabled/disabled
- tx_lpi_enabled controls whether EEE should be enabled/disabled for the
transmit path, which applies to the TBUF block
- We do not need to forcibly enable EEE upon system resume, as the PHY
state machine will trigger a link event that will do that, too
Fixes:
6ef398ea60d9 ("net: bcmgenet: add EEE support")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230606214348.2408018-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 7 Jun 2023 01:08:26 +0000 (18:08 -0700)]
eth: ixgbe: fix the wake condition
Flip the netif_carrier_ok() condition in queue wake logic.
When I moved it to inside __netif_txq_completed_wake()
I missed negating it.
This made the condition ineffective and could probably
lead to crashes.
Fixes:
301f227fc860 ("net: piggy back on the memory barrier in bql when waking queues")
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230607010826.960226-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 7 Jun 2023 01:08:25 +0000 (18:08 -0700)]
eth: bnxt: fix the wake condition
The down condition should be the negation of the wake condition,
IOW when I moved it from:
if (cond && wake())
to
if (__netif_txq_completed_wake(cond))
Cond should have been negated. Flip it now.
This bug leads to occasional crashes with netconsole.
It may also lead to queue never waking up in case BQL is not enabled.
Reported-by: David Wei <davidhwei@meta.com>
Fixes:
08a096780d92 ("bnxt: use new queue try_stop/try_wake macros")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230607010826.960226-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 8 Jun 2023 04:47:11 +0000 (21:47 -0700)]
Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-06-07
We've added 7 non-merge commits during the last 7 day(s) which contain
a total of 12 files changed, 112 insertions(+), 7 deletions(-).
The main changes are:
1) Fix a use-after-free in BPF's task local storage, from KP Singh.
2) Make struct path handling more robust in bpf_d_path, from Jiri Olsa.
3) Fix a syzbot NULL-pointer dereference in sockmap, from Eric Dumazet.
4) UAPI fix for BPF_NETFILTER before final kernel ships,
from Florian Westphal.
5) Fix map-in-map array_map_gen_lookup code generation where elem_size was
not being set for inner maps, from Rhys Rustad-Elliott.
6) Fix sockopt_sk selftest's NETLINK_LIST_MEMBERSHIPS assertion,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add extra path pointer check to d_path helper
selftests/bpf: Fix sockopt_sk selftest
bpf: netfilter: Add BPF_NETFILTER bpf_attach_type
selftests/bpf: Add access_inner_map selftest
bpf: Fix elem_size not being set for inner maps
bpf: Fix UAF in task local storage
bpf, sockmap: Avoid potential NULL dereference in sk_psock_verdict_data_ready()
====================
Link: https://lore.kernel.org/r/20230607220514.29698-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ben Hutchings [Fri, 2 Jun 2023 18:28:15 +0000 (20:28 +0200)]
lib: cpu_rmap: Fix potential use-after-free in irq_cpu_rmap_release()
irq_cpu_rmap_release() calls cpu_rmap_put(), which may free the rmap.
So we need to clear the pointer to our glue structure in rmap before
doing that, not after.
Fixes:
4e0473f1060a ("lib: cpu_rmap: Avoid use after free on rmap->obj array entries")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZHo0vwquhOy3FaXc@decadent.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 7 Jun 2023 20:49:42 +0000 (13:49 -0700)]
Merge tag 'input-for-v6.4-rc5' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for unbalanced open count for inhibited input devices
- fixups in Elantech PS/2 and Cyppress TTSP v5 drivers
- a quirk to soc_button_array driver to make it work with Lenovo
Yoga Book X90F / X90L
- a removal of erroneous entry from xpad driver
* tag 'input-for-v6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - delete a Razer DeathAdder mouse VID/PID entry
Input: psmouse - fix OOB access in Elantech protocol
Input: soc_button_array - add invalid acpi_index DMI quirk handling
Input: fix open count when closing inhibited device
Input: cyttsp5 - fix array length
Thomas Gleixner [Tue, 6 Jun 2023 23:14:05 +0000 (01:14 +0200)]
MAINTAINERS: Add entry for debug objects
This is overdue and an oversight.
Add myself to this file deespite the fact that I'm trying to reduce the
number of entries in this file which have my name attached, but in the
hope that patches wont get picked up elsewhere completely unreviewed and
unnoticed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Wed, 7 Jun 2023 08:47:13 +0000 (09:47 +0100)]
afs: Fix setting of mtime when creating a file/dir/symlink
kafs incorrectly passes a zero mtime (ie. 1st Jan 1970) to the server when
creating a file, dir or symlink because the mtime recorded in the
afs_operation struct gets passed to the server by the marshalling routines,
but the afs_mkdir(), afs_create() and afs_symlink() functions don't set it.
This gets masked if a file or directory is subsequently modified.
Fix this by filling in op->mtime before calling the create op.
Fixes:
e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiri Olsa [Tue, 6 Jun 2023 18:17:14 +0000 (11:17 -0700)]
bpf: Add extra path pointer check to d_path helper
Anastasios reported crash on stable 5.15 kernel with following
BPF attached to lsm hook:
SEC("lsm.s/bprm_creds_for_exec")
int BPF_PROG(bprm_creds_for_exec, struct linux_binprm *bprm)
{
struct path *path = &bprm->executable->f_path;
char p[128] = { 0 };
bpf_d_path(path, p, 128);
return 0;
}
But bprm->executable can be NULL, so bpf_d_path call will crash:
BUG: kernel NULL pointer dereference, address:
0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI
...
RIP: 0010:d_path+0x22/0x280
...
Call Trace:
<TASK>
bpf_d_path+0x21/0x60
bpf_prog_db9cf176e84498d9_bprm_creds_for_exec+0x94/0x99
bpf_trampoline_6442506293_0+0x55/0x1000
bpf_lsm_bprm_creds_for_exec+0x5/0x10
security_bprm_creds_for_exec+0x29/0x40
bprm_execve+0x1c1/0x900
do_execveat_common.isra.0+0x1af/0x260
__x64_sys_execve+0x32/0x40
It's problem for all stable trees with bpf_d_path helper, which was
added in 5.9.
This issue is fixed in current bpf code, where we identify and mark
trusted pointers, so the above code would fail even to load.
For the sake of the stable trees and to workaround potentially broken
verifier in the future, adding the code that reads the path object from
the passed pointer and verifies it's valid in kernel space.
Fixes:
6e22ab9da793 ("bpf: Add d_path helper")
Reported-by: Anastasios Papagiannis <tasos.papagiannnis@gmail.com>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230606181714.532998-1-jolsa@kernel.org
Hangyu Hua [Wed, 7 Jun 2023 02:23:01 +0000 (10:23 +0800)]
net: sched: fix possible refcount leak in tc_chain_tmplt_add()
try_module_get will be called in tcf_proto_lookup_ops. So module_put needs
to be called to drop the refcount if ops don't implement the required
function.
Fixes:
9f407f1768d3 ("net: sched: introduce chain templates")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 6 Jun 2023 13:13:04 +0000 (13:13 +0000)]
net: sched: act_police: fix sparse errors in tcf_police_dump()
Fixes following sparse errors:
net/sched/act_police.c:360:28: warning: dereference of noderef expression
net/sched/act_police.c:362:45: warning: dereference of noderef expression
net/sched/act_police.c:362:45: warning: dereference of noderef expression
net/sched/act_police.c:368:28: warning: dereference of noderef expression
net/sched/act_police.c:370:45: warning: dereference of noderef expression
net/sched/act_police.c:370:45: warning: dereference of noderef expression
net/sched/act_police.c:376:45: warning: dereference of noderef expression
net/sched/act_police.c:376:45: warning: dereference of noderef expression
Fixes:
d1967e495a8d ("net_sched: act_police: add 2 new attributes to support police 64bit rate and peakrate")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eelco Chaudron [Tue, 6 Jun 2023 11:56:35 +0000 (13:56 +0200)]
net: openvswitch: fix upcall counter access before allocation
Currently, the per cpu upcall counters are allocated after the vport is
created and inserted into the system. This could lead to the datapath
accessing the counters before they are allocated resulting in a kernel
Oops.
Here is an example:
PID: 59693 TASK:
ffff0005f4f51500 CPU: 0 COMMAND: "ovs-vswitchd"
#0 [
ffff80000a39b5b0] __switch_to at
ffffb70f0629f2f4
#1 [
ffff80000a39b5d0] __schedule at
ffffb70f0629f5cc
#2 [
ffff80000a39b650] preempt_schedule_common at
ffffb70f0629fa60
#3 [
ffff80000a39b670] dynamic_might_resched at
ffffb70f0629fb58
#4 [
ffff80000a39b680] mutex_lock_killable at
ffffb70f062a1388
#5 [
ffff80000a39b6a0] pcpu_alloc at
ffffb70f0594460c
#6 [
ffff80000a39b750] __alloc_percpu_gfp at
ffffb70f05944e68
#7 [
ffff80000a39b760] ovs_vport_cmd_new at
ffffb70ee6961b90 [openvswitch]
...
PID: 58682 TASK:
ffff0005b2f0bf00 CPU: 0 COMMAND: "kworker/0:3"
#0 [
ffff80000a5d2f40] machine_kexec at
ffffb70f056a0758
#1 [
ffff80000a5d2f70] __crash_kexec at
ffffb70f057e2994
#2 [
ffff80000a5d3100] crash_kexec at
ffffb70f057e2ad8
#3 [
ffff80000a5d3120] die at
ffffb70f0628234c
#4 [
ffff80000a5d31e0] die_kernel_fault at
ffffb70f062828a8
#5 [
ffff80000a5d3210] __do_kernel_fault at
ffffb70f056a31f4
#6 [
ffff80000a5d3240] do_bad_area at
ffffb70f056a32a4
#7 [
ffff80000a5d3260] do_translation_fault at
ffffb70f062a9710
#8 [
ffff80000a5d3270] do_mem_abort at
ffffb70f056a2f74
#9 [
ffff80000a5d32a0] el1_abort at
ffffb70f06297dac
#10 [
ffff80000a5d32d0] el1h_64_sync_handler at
ffffb70f06299b24
#11 [
ffff80000a5d3410] el1h_64_sync at
ffffb70f056812dc
#12 [
ffff80000a5d3430] ovs_dp_upcall at
ffffb70ee6963c84 [openvswitch]
#13 [
ffff80000a5d3470] ovs_dp_process_packet at
ffffb70ee6963fdc [openvswitch]
#14 [
ffff80000a5d34f0] ovs_vport_receive at
ffffb70ee6972c78 [openvswitch]
#15 [
ffff80000a5d36f0] netdev_port_receive at
ffffb70ee6973948 [openvswitch]
#16 [
ffff80000a5d3720] netdev_frame_hook at
ffffb70ee6973a28 [openvswitch]
#17 [
ffff80000a5d3730] __netif_receive_skb_core.constprop.0 at
ffffb70f06079f90
We moved the per cpu upcall counter allocation to the existing vport
alloc and free functions to solve this.
Fixes:
95637d91fefd ("net: openvswitch: release vport resources on failure")
Fixes:
1933ea365aa7 ("net: openvswitch: Add support to count upcall packets")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 6 Jun 2023 11:42:33 +0000 (11:42 +0000)]
net: sched: move rtm_tca_policy declaration to include file
rtm_tca_policy is used from net/sched/sch_api.c and net/sched/cls_api.c,
thus should be declared in an include file.
This fixes the following sparse warning:
net/sched/sch_api.c:1434:25: warning: symbol 'rtm_tca_policy' was not declared. Should it be static?
Fixes:
e331473fee3d ("net/sched: cls_api: add missing validation of netlink attributes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Schmidt [Tue, 6 Jun 2023 17:12:53 +0000 (10:12 -0700)]
ice: make writes to /dev/gnssX synchronous
The current ice driver's GNSS write implementation buffers writes and
works through them asynchronously in a kthread. That's bad because:
- The GNSS write_raw operation is supposed to be synchronous[1][2].
- There is no upper bound on the number of pending writes.
Userspace can submit writes much faster than the driver can process,
consuming unlimited amounts of kernel memory.
A patch that's currently on review[3] ("[v3,net] ice: Write all GNSS
buffers instead of first one") would add one more problem:
- The possibility of waiting for a very long time to flush the write
work when doing rmmod, softlockups.
To fix these issues, simplify the implementation: Drop the buffering,
the write_work, and make the writes synchronous.
I tested this with gpsd and ubxtool.
[1] https://events19.linuxfoundation.org/wp-content/uploads/2017/12/The-GNSS-Subsystem-Johan-Hovold-Hovold-Consulting-AB.pdf
"User interface" slide.
[2] A comment in drivers/gnss/core.c:gnss_write():
/* Ignoring O_NONBLOCK, write_raw() is synchronous. */
[3] https://patchwork.ozlabs.org/project/intel-wired-lan/patch/
20230217120541.16745-1-karol.kolacinski@intel.com/
Fixes:
d6b98c8d242a ("ice: add write functionality for GNSS TTY")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 6 Jun 2023 11:19:29 +0000 (11:19 +0000)]
net: sched: add rcu annotations around qdisc->qdisc_sleeping
syzbot reported a race around qdisc->qdisc_sleeping [1]
It is time we add proper annotations to reads and writes to/from
qdisc->qdisc_sleeping.
[1]
BUG: KCSAN: data-race in dev_graft_qdisc / qdisc_lookup_rcu
read to 0xffff8881286fc618 of 8 bytes by task 6928 on cpu 1:
qdisc_lookup_rcu+0x192/0x2c0 net/sched/sch_api.c:331
__tcf_qdisc_find+0x74/0x3c0 net/sched/cls_api.c:1174
tc_get_tfilter+0x18f/0x990 net/sched/cls_api.c:2547
rtnetlink_rcv_msg+0x7af/0x8c0 net/core/rtnetlink.c:6386
netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2546
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6413
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1913
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0x375/0x4c0 net/socket.c:2503
___sys_sendmsg net/socket.c:2557 [inline]
__sys_sendmsg+0x1e3/0x270 net/socket.c:2586
__do_sys_sendmsg net/socket.c:2595 [inline]
__se_sys_sendmsg net/socket.c:2593 [inline]
__x64_sys_sendmsg+0x46/0x50 net/socket.c:2593
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
write to 0xffff8881286fc618 of 8 bytes by task 6912 on cpu 0:
dev_graft_qdisc+0x4f/0x80 net/sched/sch_generic.c:1115
qdisc_graft+0x7d0/0xb60 net/sched/sch_api.c:1103
tc_modify_qdisc+0x712/0xf10 net/sched/sch_api.c:1693
rtnetlink_rcv_msg+0x807/0x8c0 net/core/rtnetlink.c:6395
netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2546
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6413
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1913
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0x375/0x4c0 net/socket.c:2503
___sys_sendmsg net/socket.c:2557 [inline]
__sys_sendmsg+0x1e3/0x270 net/socket.c:2586
__do_sys_sendmsg net/socket.c:2595 [inline]
__se_sys_sendmsg net/socket.c:2593 [inline]
__x64_sys_sendmsg+0x46/0x50 net/socket.c:2593
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 6912 Comm: syz-executor.5 Not tainted
6.4.0-rc3-syzkaller-00190-g0d85b27b0cc6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/16/2023
Fixes:
3a7d0d07a386 ("net: sched: extend Qdisc with rcu")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Jamal Hadi Salim<jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 7 Jun 2023 09:09:05 +0000 (10:09 +0100)]
Merge branch 'rfs-lockless-annotate'
Eric Dumazet says:
====================
rfs: annotate lockless accesses
rfs runs without locks held, so we should annotate
read and writes to shared variables.
It should prevent compilers forcing writes
in the following situation:
if (var != val)
var = val;
A compiler could indeed simply avoid the conditional:
var = val;
This matters if var is shared between many cpus.
v2: aligns one closing bracket (Simon)
adds Fixes: tags (Jakub)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 6 Jun 2023 07:41:15 +0000 (07:41 +0000)]
rfs: annotate lockless accesses to RFS sock flow table
Add READ_ONCE()/WRITE_ONCE() on accesses to the sock flow table.
This also prevents a (smart ?) compiler to remove the condition in:
if (table->ents[index] != newval)
table->ents[index] = newval;
We need the condition to avoid dirtying a shared cache line.
Fixes:
fec5e652e58f ("rfs: Receive Flow Steering")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 6 Jun 2023 07:41:14 +0000 (07:41 +0000)]
rfs: annotate lockless accesses to sk->sk_rxhash
Add READ_ONCE()/WRITE_ONCE() on accesses to sk->sk_rxhash.
This also prevents a (smart ?) compiler to remove the condition in:
if (sk->sk_rxhash != newval)
sk->sk_rxhash = newval;
We need the condition to avoid dirtying a shared cache line.
Fixes:
fec5e652e58f ("rfs: Receive Flow Steering")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 7 Jun 2023 04:36:57 +0000 (21:36 -0700)]
Merge tag 'for-net-2023-06-05' of git://git./linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fixes to debugfs registration
- Fix use-after-free in hci_remove_ltk/hci_remove_irk
- Fixes to ISO channel support
- Fix missing checks for invalid L2CAP DCID
- Fix l2cap_disconnect_req deadlock
- Add lock to protect HCI_UNREGISTER
* tag 'for-net-2023-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Add missing checks for invalid DCID
Bluetooth: ISO: use correct CIS order in Set CIG Parameters event
Bluetooth: ISO: don't try to remove CIG if there are bound CIS left
Bluetooth: Fix l2cap_disconnect_req deadlock
Bluetooth: hci_qca: fix debugfs registration
Bluetooth: fix debugfs registration
Bluetooth: hci_sync: add lock to protect HCI_UNREGISTER
Bluetooth: Fix use-after-free in hci_remove_ltk/hci_remove_irk
Bluetooth: ISO: Fix CIG auto-allocation to select configurable CIG
Bluetooth: ISO: consider right CIS when removing CIG at cleanup
====================
Link: https://lore.kernel.org/r/20230606003454.2392552-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 7 Jun 2023 04:23:49 +0000 (21:23 -0700)]
Merge tag 'nf-23-06-07' of git://git./linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Missing nul-check in basechain hook netlink dump path, from Gavrilov Ilia.
2) Fix bitwise register tracking, from Jeremy Sowden.
3) Null pointer dereference when accessing conntrack helper,
from Tijs Van Buggenhout.
4) Add schedule point to ipset's call_ad, from Kuniyuki Iwashima.
5) Incorrect boundary check when building chain blob.
* tag 'nf-23-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: out-of-bound check in chain blob
netfilter: ipset: Add schedule point in call_ad().
netfilter: conntrack: fix NULL pointer dereference in nf_confirm_cthelper
netfilter: nft_bitwise: fix register tracking
netfilter: nf_tables: Add null check for nla_nest_start_noflag() in nft_dump_basechain_hook()
====================
Link: https://lore.kernel.org/r/20230606225851.67394-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 7 Jun 2023 04:16:52 +0000 (21:16 -0700)]
Merge tag 'wireless-2023-06-06' of git://git./linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.4
Both rtw88 and rtw89 have a 802.11 powersave fix for a regression
introduced in v6.0. mt76 fixes a race and a null pointer dereference.
iwlwifi fixes an issue where not enough memory was allocated for a
firmware event. And finally the stack has several smaller fixes all
over.
* tag 'wireless-2023-06-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: fix locking in regulatory disconnect
wifi: cfg80211: fix locking in sched scan stop work
wifi: iwlwifi: mvm: Fix -Warray-bounds bug in iwl_mvm_wait_d3_notif()
wifi: mac80211: fix switch count in EMA beacons
wifi: mac80211: don't translate beacon/presp addrs
wifi: mac80211: mlme: fix non-inheritence element
wifi: cfg80211: reject bad AP MLD address
wifi: mac80211: use correct iftype HE cap
wifi: mt76: mt7996: fix possible NULL pointer dereference in mt7996_mac_write_txwi()
wifi: rtw89: remove redundant check of entering LPS
wifi: rtw89: correct PS calculation for SUPPORTS_DYNAMIC_PS
wifi: rtw88: correct PS calculation for SUPPORTS_DYNAMIC_PS
wifi: mt76: mt7615: fix possible race in mt7615_mac_sta_poll
====================
Link: https://lore.kernel.org/r/20230606150817.EC133C433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Brett Creeley [Mon, 5 Jun 2023 19:59:25 +0000 (12:59 -0700)]
virtio_net: use control_buf for coalesce params
Commit
699b045a8e43 ("net: virtio_net: notifications coalescing
support") added coalescing command support for virtio_net. However,
the coalesce commands are using buffers on the stack, which is causing
the device to see DMA errors. There should also be a complaint from
check_for_stack() in debug_dma_map_xyz(). Fix this by adding and using
coalesce params from the control_buf struct, which aligns with other
commands.
Cc: stable@vger.kernel.org
Fixes:
699b045a8e43 ("net: virtio_net: notifications coalescing support")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20230605195925.51625-1-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Brett Creeley [Mon, 5 Jun 2023 19:51:16 +0000 (12:51 -0700)]
pds_core: Fix FW recovery detection
Commit
523847df1b37 ("pds_core: add devcmd device interfaces") included
initial support for FW recovery detection. Unfortunately, the ordering
in pdsc_is_fw_good() was incorrect, which was causing FW recovery to be
undetected by the driver. Fix this by making sure to update the cached
fw_status by calling pdsc_is_fw_running() before setting the local FW
gen.
Fixes:
523847df1b37 ("pds_core: add devcmd device interfaces")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230605195116.49653-1-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Mon, 5 Jun 2023 16:16:47 +0000 (16:16 +0000)]
tcp: gso: really support BIG TCP
We missed that tcp_gso_segment() was assuming skb->len was smaller than 65535 :
oldlen = (u16)~skb->len;
This part came with commit
0718bcc09b35 ("[NET]: Fix CHECKSUM_HW GSO problems.")
This leads to wrong TCP checksum.
Adapt the code to accept arbitrary packet length.
v2:
- use two csum_add() instead of csum_fold() (Alexander Duyck)
- Change delta type to __wsum to reduce casts (Alexander Duyck)
Fixes:
09f3d1a3a52c ("ipv6/gso: remove temporary HBH/jumbo header")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230605161647.3624428-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Mon, 5 Jun 2023 18:06:17 +0000 (11:06 -0700)]
ipv6: rpl: Fix Route of Death.
A remote DoS vulnerability of RPL Source Routing is assigned CVE-2023-2156.
The Source Routing Header (SRH) has the following format:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Next Header | Hdr Ext Len | Routing Type | Segments Left |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| CmprI | CmprE | Pad | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| |
. .
. Addresses[1..n] .
. .
| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The originator of an SRH places the first hop's IPv6 address in the IPv6
header's IPv6 Destination Address and the second hop's IPv6 address as
the first address in Addresses[1..n].
The CmprI and CmprE fields indicate the number of prefix octets that are
shared with the IPv6 Destination Address. When CmprI or CmprE is not 0,
Addresses[1..n] are compressed as follows:
1..n-1 : (16 - CmprI) bytes
n : (16 - CmprE) bytes
Segments Left indicates the number of route segments remaining. When the
value is not zero, the SRH is forwarded to the next hop. Its address
is extracted from Addresses[n - Segment Left + 1] and swapped with IPv6
Destination Address.
When Segment Left is greater than or equal to 2, the size of SRH is not
changed because Addresses[1..n-1] are decompressed and recompressed with
CmprI.
OTOH, when Segment Left changes from 1 to 0, the new SRH could have a
different size because Addresses[1..n-1] are decompressed with CmprI and
recompressed with CmprE.
Let's say CmprI is 15 and CmprE is 0. When we receive SRH with Segment
Left >= 2, Addresses[1..n-1] have 1 byte for each, and Addresses[n] has
16 bytes. When Segment Left is 1, Addresses[1..n-1] is decompressed to
16 bytes and not recompressed. Finally, the new SRH will need more room
in the header, and the size is (16 - 1) * (n - 1) bytes.
Here the max value of n is 255 as Segment Left is u8, so in the worst case,
we have to allocate 3825 bytes in the skb headroom. However, now we only
allocate a small fixed buffer that is IPV6_RPL_SRH_WORST_SWAP_SIZE (16 + 7
bytes). If the decompressed size overflows the room, skb_push() hits BUG()
below [0].
Instead of allocating the fixed buffer for every packet, let's allocate
enough headroom only when we receive SRH with Segment Left 1.
[0]:
skbuff: skb_under_panic: text:
ffffffff81c9f6e2 len:576 put:576 head:
ffff8880070b5180 data:
ffff8880070b4fb0 tail:0x70 end:0x140 dev:lo
kernel BUG at net/core/skbuff.c:200!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 154 Comm: python3 Not tainted
6.4.0-rc4-00190-gc308e9ec0047 #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:skb_panic (net/core/skbuff.c:200)
Code: 4f 70 50 8b 87 bc 00 00 00 50 8b 87 b8 00 00 00 50 ff b7 c8 00 00 00 4c 8b 8f c0 00 00 00 48 c7 c7 80 6e 77 82 e8 ad 8b 60 ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90
RSP: 0018:
ffffc90000003da0 EFLAGS:
00000246
RAX:
0000000000000085 RBX:
ffff8880058a6600 RCX:
0000000000000000
RDX:
0000000000000000 RSI:
ffff88807dc1c540 RDI:
ffff88807dc1c540
RBP:
ffffc90000003e48 R08:
ffffffff82b392c8 R09:
00000000ffffdfff
R10:
ffffffff82a592e0 R11:
ffffffff82b092e0 R12:
ffff888005b1c800
R13:
ffff8880070b51b8 R14:
ffff888005b1ca18 R15:
ffff8880070b5190
FS:
00007f4539f0b740(0000) GS:
ffff88807dc00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000055670baf3000 CR3:
0000000005b0e000 CR4:
00000000007506f0
PKRU:
55555554
Call Trace:
<IRQ>
skb_push (net/core/skbuff.c:210)
ipv6_rthdr_rcv (./include/linux/skbuff.h:2880 net/ipv6/exthdrs.c:634 net/ipv6/exthdrs.c:718)
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5))
ip6_input_finish (./include/linux/rcupdate.h:805 net/ipv6/ip6_input.c:483)
__netif_receive_skb_one_core (net/core/dev.c:5494)
process_backlog (./include/linux/rcupdate.h:805 net/core/dev.c:5934)
__napi_poll (net/core/dev.c:6496)
net_rx_action (net/core/dev.c:6565 net/core/dev.c:6696)
__do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572)
do_softirq (kernel/softirq.c:472 kernel/softirq.c:459)
</IRQ>
<TASK>
__local_bh_enable_ip (kernel/softirq.c:396)
__dev_queue_xmit (net/core/dev.c:4272)
ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:134)
rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914)
sock_sendmsg (net/socket.c:724 net/socket.c:747)
__sys_sendto (net/socket.c:2144)
__x64_sys_sendto (net/socket.c:2156 net/socket.c:2152 net/socket.c:2152)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
RIP: 0033:0x7f453a138aea
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:
00007ffcc212a1c8 EFLAGS:
00000246 ORIG_RAX:
000000000000002c
RAX:
ffffffffffffffda RBX:
00007ffcc212a288 RCX:
00007f453a138aea
RDX:
0000000000000060 RSI:
00007f4539084c20 RDI:
0000000000000003
RBP:
00007f4538308e80 R08:
00007ffcc212a300 R09:
000000000000001c
R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000000
R13:
ffffffffc4653600 R14:
0000000000000001 R15:
00007f4539712d1b
</TASK>
Modules linked in:
Fixes:
8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr")
Reported-by: Max VA
Closes: https://www.interruptlabs.co.uk/articles/linux-ipv6-route-of-death
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230605180617.67284-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 5 Jun 2023 23:32:57 +0000 (16:32 -0700)]
netlink: specs: ethtool: fix random typos
Working on the code gen for C reveals typos in the ethtool spec
as the compiler tries to find the names in the existing uAPI
header. Fix the mistakes.
Fixes:
a353318ebf24 ("tools: ynl: populate most of the ethtool spec")
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230605233257.843977-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso [Tue, 6 Jun 2023 14:32:44 +0000 (16:32 +0200)]
netfilter: nf_tables: out-of-bound check in chain blob
Add current size of rule expressions to the boundary check.
Fixes:
2c865a8a28a1 ("netfilter: nf_tables: add rule blob layout")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Kuniyuki Iwashima [Thu, 18 May 2023 17:33:00 +0000 (10:33 -0700)]
netfilter: ipset: Add schedule point in call_ad().
syzkaller found a repro that causes Hung Task [0] with ipset. The repro
first creates an ipset and then tries to delete a large number of IPs
from the ipset concurrently:
IPSET_ATTR_IPADDR_IPV4 : 172.20.20.187
IPSET_ATTR_CIDR : 2
The first deleting thread hogs a CPU with nfnl_lock(NFNL_SUBSYS_IPSET)
held, and other threads wait for it to be released.
Previously, the same issue existed in set->variant->uadt() that could run
so long under ip_set_lock(set). Commit
5e29dc36bd5e ("netfilter: ipset:
Rework long task execution when adding/deleting entries") tried to fix it,
but the issue still exists in the caller with another mutex.
While adding/deleting many IPs, we should release the CPU periodically to
prevent someone from abusing ipset to hang the system.
Note we need to increment the ipset's refcnt to prevent the ipset from
being destroyed while rescheduling.
[0]:
INFO: task syz-executor174:268 blocked for more than 143 seconds.
Not tainted
6.4.0-rc1-00145-gba79e9a73284 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor174 state:D stack:0 pid:268 ppid:260 flags:0x0000000d
Call trace:
__switch_to+0x308/0x714 arch/arm64/kernel/process.c:556
context_switch kernel/sched/core.c:5343 [inline]
__schedule+0xd84/0x1648 kernel/sched/core.c:6669
schedule+0xf0/0x214 kernel/sched/core.c:6745
schedule_preempt_disabled+0x58/0xf0 kernel/sched/core.c:6804
__mutex_lock_common kernel/locking/mutex.c:679 [inline]
__mutex_lock+0x6fc/0xdb0 kernel/locking/mutex.c:747
__mutex_lock_slowpath+0x14/0x20 kernel/locking/mutex.c:1035
mutex_lock+0x98/0xf0 kernel/locking/mutex.c:286
nfnl_lock net/netfilter/nfnetlink.c:98 [inline]
nfnetlink_rcv_msg+0x480/0x70c net/netfilter/nfnetlink.c:295
netlink_rcv_skb+0x1c0/0x350 net/netlink/af_netlink.c:2546
nfnetlink_rcv+0x18c/0x199c net/netfilter/nfnetlink.c:658
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x664/0x8cc net/netlink/af_netlink.c:1365
netlink_sendmsg+0x6d0/0xa4c net/netlink/af_netlink.c:1913
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0x4b8/0x810 net/socket.c:2503
___sys_sendmsg net/socket.c:2557 [inline]
__sys_sendmsg+0x1f8/0x2a4 net/socket.c:2586
__do_sys_sendmsg net/socket.c:2595 [inline]
__se_sys_sendmsg net/socket.c:2593 [inline]
__arm64_sys_sendmsg+0x80/0x94 net/socket.c:2593
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x84/0x270 arch/arm64/kernel/syscall.c:52
el0_svc_common+0x134/0x24c arch/arm64/kernel/syscall.c:142
do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193
el0_svc+0x2c/0x7c arch/arm64/kernel/entry-common.c:637
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Reported-by: syzkaller <syzkaller@googlegroups.com>
Fixes:
a7b4f989a629 ("netfilter: ipset: IP set core support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Tijs Van Buggenhout [Thu, 25 May 2023 10:25:26 +0000 (12:25 +0200)]
netfilter: conntrack: fix NULL pointer dereference in nf_confirm_cthelper
An nf_conntrack_helper from nf_conn_help may become NULL after DNAT.
Observed when TCP port 1720 (Q931_PORT), associated with h323 conntrack
helper, is DNAT'ed to another destination port (e.g. 1730), while
nfqueue is being used for final acceptance (e.g. snort).
This happenned after transition from kernel 4.14 to 5.10.161.
Workarounds:
* keep the same port (1720) in DNAT
* disable nfqueue
* disable/unload h323 NAT helper
$ linux-5.10/scripts/decode_stacktrace.sh vmlinux < /tmp/kernel.log
BUG: kernel NULL pointer dereference, address:
0000000000000084
[..]
RIP: 0010:nf_conntrack_update (net/netfilter/nf_conntrack_core.c:2080 net/netfilter/nf_conntrack_core.c:2134) nf_conntrack
[..]
nfqnl_reinject (net/netfilter/nfnetlink_queue.c:237) nfnetlink_queue
nfqnl_recv_verdict (net/netfilter/nfnetlink_queue.c:1230) nfnetlink_queue
nfnetlink_rcv_msg (net/netfilter/nfnetlink.c:241) nfnetlink
[..]
Fixes:
ee04805ff54a ("netfilter: conntrack: make conntrack userspace helpers work again")
Signed-off-by: Tijs Van Buggenhout <tijs.van.buggenhout@axsguard.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jeremy Sowden [Thu, 25 May 2023 14:07:24 +0000 (15:07 +0100)]
netfilter: nft_bitwise: fix register tracking
At the end of `nft_bitwise_reduce`, there is a loop which is intended to
update the bitwise expression associated with each tracked destination
register. However, currently, it just updates the first register
repeatedly. Fix it.
Fixes:
34cc9e52884a ("netfilter: nf_tables: cancel tracking for clobbered destination registers")
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Gavrilov Ilia [Wed, 24 May 2023 12:25:27 +0000 (12:25 +0000)]
netfilter: nf_tables: Add null check for nla_nest_start_noflag() in nft_dump_basechain_hook()
The nla_nest_start_noflag() function may fail and return NULL;
the return value needs to be checked.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes:
d54725cd11a5 ("netfilter: nf_tables: support for multiple devices per netdev hook")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Yonghong Song [Tue, 6 Jun 2023 17:22:02 +0000 (10:22 -0700)]
selftests/bpf: Fix sockopt_sk selftest
Commit
f4e4534850a9 ("net/netlink: fix NETLINK_LIST_MEMBERSHIPS length report")
fixed NETLINK_LIST_MEMBERSHIPS length report which caused
selftest sockopt_sk failure. The failure log looks like
test_sockopt_sk:PASS:join_cgroup /sockopt_sk 0 nsec
run_test:PASS:skel_load 0 nsec
run_test:PASS:setsockopt_link 0 nsec
run_test:PASS:getsockopt_link 0 nsec
getsetsockopt:FAIL:Unexpected NETLINK_LIST_MEMBERSHIPS value unexpected Unexpected NETLINK_LIST_MEMBERSHIPS value: actual 8 != expected 4
run_test:PASS:getsetsockopt 0 nsec
#201 sockopt_sk:FAIL
In net/netlink/af_netlink.c, function netlink_getsockopt(), for NETLINK_LIST_MEMBERSHIPS,
nlk->ngroups equals to 36. Before Commit
f4e4534850a9, the optlen is calculated as
ALIGN(nlk->ngroups / 8, sizeof(u32)) = 4
After that commit, the optlen is
ALIGN(BITS_TO_BYTES(nlk->ngroups), sizeof(u32)) = 8
Fix the test by setting the expected optlen to be 8.
Fixes:
f4e4534850a9 ("net/netlink: fix NETLINK_LIST_MEMBERSHIPS length report")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230606172202.1606249-1-yhs@fb.com
Linus Torvalds [Tue, 6 Jun 2023 13:18:28 +0000 (06:18 -0700)]
Merge tag 'spi-fix-v6.4-rc5' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of driver specific fixes, none of them particularly
remarkable or severe"
* tag 'spi-fix-v6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: qup: Request DMA before enabling clocks
spi: mt65xx: make sure operations completed before unloading
spi: lpspi: disable lpspi module irq in DMA mode
Johannes Berg [Tue, 6 Jun 2023 12:34:48 +0000 (14:34 +0200)]
wifi: cfg80211: fix locking in regulatory disconnect
This should use wiphy_lock() now instead of requiring the
RTNL, since __cfg80211_leave() via cfg80211_leave() is now
requiring that lock to be held.
Fixes:
a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Tue, 6 Jun 2023 12:34:47 +0000 (14:34 +0200)]
wifi: cfg80211: fix locking in sched scan stop work
This should use wiphy_lock() now instead of acquiring the
RTNL, since cfg80211_stop_sched_scan_req() now needs that.
Fixes:
a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Linus Torvalds [Tue, 6 Jun 2023 12:49:06 +0000 (05:49 -0700)]
Merge tag 'gfs2-v6.4-rc4-fix' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Andreas Gruenbacher:
- Don't get stuck writing page onto itself under direct I/O
* tag 'gfs2-v6.4-rc4-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Don't get stuck writing page onto itself under direct I/O
Linus Torvalds [Tue, 6 Jun 2023 12:42:21 +0000 (05:42 -0700)]
Merge tag 'platform-drivers-x86-v6.4-4' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- various Microsoft Surface support fixes
- one fix for the INT3472 driver
* tag 'platform-drivers-x86-v6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: int3472: Avoid crash in unregistering regulator gpio
platform/surface: aggregator_tabletsw: Add support for book mode in POS subsystem
platform/surface: aggregator_tabletsw: Add support for book mode in KIP subsystem
platform/surface: aggregator: Allow completion work-items to be executed in parallel
platform/surface: aggregator: Make to_ssam_device_driver() respect constness
Manish Chopra [Mon, 5 Jun 2023 11:26:00 +0000 (16:56 +0530)]
qed/qede: Fix scheduling while atomic
Statistics read through bond interface via sysfs causes
below bug and traces as it triggers the bonding module to
collect the slave device statistics while holding the spinlock,
beneath that qede->qed driver statistics flow gets scheduled out
due to usleep_range() used in PTT acquire logic
[ 3673.988874] Hardware name: HPE ProLiant DL365 Gen10 Plus/ProLiant DL365 Gen10 Plus, BIOS A42 10/29/2021
[ 3673.988878] Call Trace:
[ 3673.988891] dump_stack_lvl+0x34/0x44
[ 3673.988908] __schedule_bug.cold+0x47/0x53
[ 3673.988918] __schedule+0x3fb/0x560
[ 3673.988929] schedule+0x43/0xb0
[ 3673.988932] schedule_hrtimeout_range_clock+0xbf/0x1b0
[ 3673.988937] ? __hrtimer_init+0xc0/0xc0
[ 3673.988950] usleep_range+0x5e/0x80
[ 3673.988955] qed_ptt_acquire+0x2b/0xd0 [qed]
[ 3673.988981] _qed_get_vport_stats+0x141/0x240 [qed]
[ 3673.989001] qed_get_vport_stats+0x18/0x80 [qed]
[ 3673.989016] qede_fill_by_demand_stats+0x37/0x400 [qede]
[ 3673.989028] qede_get_stats64+0x19/0xe0 [qede]
[ 3673.989034] dev_get_stats+0x5c/0xc0
[ 3673.989045] netstat_show.constprop.0+0x52/0xb0
[ 3673.989055] dev_attr_show+0x19/0x40
[ 3673.989065] sysfs_kf_seq_show+0x9b/0xf0
[ 3673.989076] seq_read_iter+0x120/0x4b0
[ 3673.989087] new_sync_read+0x118/0x1a0
[ 3673.989095] vfs_read+0xf3/0x180
[ 3673.989099] ksys_read+0x5f/0xe0
[ 3673.989102] do_syscall_64+0x3b/0x90
[ 3673.989109] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 3673.989115] RIP: 0033:0x7f8467d0b082
[ 3673.989119] Code: c0 e9 b2 fe ff ff 50 48 8d 3d ca 05 08 00 e8 35 e7 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
[ 3673.989121] RSP: 002b:
00007ffffb21fd08 EFLAGS:
00000246 ORIG_RAX:
0000000000000000
[ 3673.989127] RAX:
ffffffffffffffda RBX:
000000000100eca0 RCX:
00007f8467d0b082
[ 3673.989128] RDX:
00000000000003ff RSI:
00007ffffb21fdc0 RDI:
0000000000000003
[ 3673.989130] RBP:
00007f8467b96028 R08:
0000000000000010 R09:
00007ffffb21ec00
[ 3673.989132] R10:
00007ffffb27b170 R11:
0000000000000246 R12:
00000000000000f0
[ 3673.989134] R13:
0000000000000003 R14:
00007f8467b92000 R15:
0000000000045a05
[ 3673.989139] CPU: 30 PID: 285188 Comm: read_all Kdump: loaded Tainted: G W OE
Fix this by collecting the statistics asynchronously from a periodic
delayed work scheduled at default stats coalescing interval and return
the recent copy of statisitcs from .ndo_get_stats64(), also add ability
to configure/retrieve stats coalescing interval using below commands -
ethtool -C ethx stats-block-usecs <val>
ethtool -c ethx
Fixes:
133fac0eedc3 ("qede: Add basic ethtool support")
Cc: Sudarsana Kalluru <skalluru@marvell.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Manish Chopra <manishc@marvell.com>
Link: https://lore.kernel.org/r/20230605112600.48238-1-manishc@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Linus Torvalds [Tue, 6 Jun 2023 11:36:02 +0000 (04:36 -0700)]
Merge tag 'for-linus-
2023060501' of git://git./linux/kernel/git/hid/hid
Pull HID fix from Jiri Kosina:
- Final, confirmed fix for regression causing some devices connected
via Logitech HID++ Unifying receiver take too long to initialize
(Benjamin Tissoires)
* tag 'for-linus-
2023060501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: hidpp: terminate retry loop on success
Gustavo A. R. Silva [Fri, 2 Jun 2023 19:42:47 +0000 (13:42 -0600)]
wifi: iwlwifi: mvm: Fix -Warray-bounds bug in iwl_mvm_wait_d3_notif()
kmemdup() at line 2735 is not duplicating enough memory for
notif->tid_tear_down and notif->station_id. As it only duplicates
612 bytes: up to offsetofend(struct iwl_wowlan_info_notif,
received_beacons), this is the range of [0, 612) bytes.
2735 notif = kmemdup(notif_v1,
2736 offsetofend(struct iwl_wowlan_info_notif,
2737 received_beacons),
2738 GFP_ATOMIC);
which evidently does not cover bytes 612 and 613 for members
tid_tear_down and station_id in struct iwl_wowlan_info_notif.
See below:
$ pahole -C iwl_wowlan_info_notif drivers/net/wireless/intel/iwlwifi/mvm/d3.o
struct iwl_wowlan_info_notif {
struct iwl_wowlan_gtk_status_v3 gtk[2]; /* 0 488 */
/* --- cacheline 7 boundary (448 bytes) was 40 bytes ago --- */
struct iwl_wowlan_igtk_status igtk[2]; /* 488 80 */
/* --- cacheline 8 boundary (512 bytes) was 56 bytes ago --- */
__le64 replay_ctr; /* 568 8 */
/* --- cacheline 9 boundary (576 bytes) --- */
__le16 pattern_number; /* 576 2 */
__le16 reserved1; /* 578 2 */
__le16 qos_seq_ctr[8]; /* 580 16 */
__le32 wakeup_reasons; /* 596 4 */
__le32 num_of_gtk_rekeys; /* 600 4 */
__le32 transmitted_ndps; /* 604 4 */
__le32 received_beacons; /* 608 4 */
u8 tid_tear_down; /* 612 1 */
u8 station_id; /* 613 1 */
u8 reserved2[2]; /* 614 2 */
/* size: 616, cachelines: 10, members: 13 */
/* last cacheline: 40 bytes */
};
Therefore, when the following assignments take place, actually no memory
has been allocated for those objects:
2743 notif->tid_tear_down = notif_v1->tid_tear_down;
2744 notif->station_id = notif_v1->station_id;
Fix this by allocating space for the whole notif object and zero out the
remaining space in memory after member station_id.
This also fixes the following -Warray-bounds issues:
CC drivers/net/wireless/intel/iwlwifi/mvm/d3.o
drivers/net/wireless/intel/iwlwifi/mvm/d3.c: In function ‘iwl_mvm_wait_d3_notif’:
drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2743:30: warning: array subscript ‘struct iwl_wowlan_info_notif[0]’ is partly outside array bounds of ‘unsigned char[612]’ [-Warray-bounds=]
2743 | notif->tid_tear_down = notif_v1->tid_tear_down;
|
from drivers/net/wireless/intel/iwlwifi/mvm/d3.c:7:
In function ‘kmemdup’,
inlined from ‘iwl_mvm_wait_d3_notif’ at drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2735:12:
include/linux/fortify-string.h:765:16: note: object of size 612 allocated by ‘__real_kmemdup’
765 | return __real_kmemdup(p, size, gfp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/mvm/d3.c: In function ‘iwl_mvm_wait_d3_notif’:
drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2744:30: warning: array subscript ‘struct iwl_wowlan_info_notif[0]’ is partly outside array bounds of ‘unsigned char[612]’ [-Warray-bounds=]
2744 | notif->station_id = notif_v1->station_id;
| ^~
In function ‘kmemdup’,
inlined from ‘iwl_mvm_wait_d3_notif’ at drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2735:12:
include/linux/fortify-string.h:765:16: note: object of size 612 allocated by ‘__real_kmemdup’
765 | return __real_kmemdup(p, size, gfp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Link: https://github.com/KSPP/linux/issues/306
Fixes:
905d50ddbc83 ("wifi: iwlwifi: mvm: support wowlan info notification version 2")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/ZHpGN555FwAKGduH@work
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Aditya Kumar Singh [Wed, 31 May 2023 06:20:12 +0000 (11:50 +0530)]
wifi: mac80211: fix switch count in EMA beacons
Currently, whenever an EMA beacon is formed, due to is_template
argument being false from the caller, the switch count is always
decremented once which is wrong.
Also if switch count is equal to profile periodicity, this makes
the switch count to reach till zero which triggers a WARN_ON_ONCE.
[ 261.593915] CPU: 1 PID: 800 Comm: kworker/u8:3 Not tainted 5.4.213 #0
[ 261.616143] Hardware name: Qualcomm Technologies, Inc. IPQ9574
[ 261.622666] Workqueue: phy0 ath12k_get_link_bss_conf [ath12k]
[ 261.629771] pstate:
60400005 (nZCv daif +PAN -UAO)
[ 261.635595] pc : ieee80211_next_txq+0x1ac/0x1b8 [mac80211]
[ 261.640282] lr : ieee80211_beacon_update_cntdwn+0x64/0xb4 [mac80211]
[...]
[ 261.729683] Call trace:
[ 261.734986] ieee80211_next_txq+0x1ac/0x1b8 [mac80211]
[ 261.737156] ieee80211_beacon_cntdwn_is_complete+0xa28/0x1194 [mac80211]
[ 261.742365] ieee80211_beacon_cntdwn_is_complete+0xef4/0x1194 [mac80211]
[ 261.749224] ieee80211_beacon_get_template_ema_list+0x38/0x5c [mac80211]
[ 261.755908] ath12k_get_link_bss_conf+0xf8/0x33b4 [ath12k]
[ 261.762590] ath12k_get_link_bss_conf+0x390/0x33b4 [ath12k]
[ 261.767881] process_one_work+0x194/0x270
[ 261.773346] worker_thread+0x200/0x314
[ 261.777514] kthread+0x140/0x150
[ 261.781158] ret_from_fork+0x10/0x18
Fix this issue by making the is_template argument as true when fetching
the EMA beacons.
Fixes:
bd54f3c29077 ("wifi: mac80211: generate EMA beacons in AP mode")
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://lore.kernel.org/r/20230531062012.4537-1-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Sun, 4 Jun 2023 09:11:15 +0000 (12:11 +0300)]
wifi: mac80211: don't translate beacon/presp addrs
Don't do link address translation for beacons and probe responses,
this leads to reporting multiple scan list entries for the same AP
(one with the MLD address) which just breaks things.
We might need to extend this in the future for some other (action)
frames that aren't MLD addressed.
Fixes:
42fb9148c078 ("wifi: mac80211: do link->MLD address translation on RX")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.62adead1b43a.Ifc25eed26ebf3b269f60b1ec10060156d0e7ec0d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Sun, 4 Jun 2023 09:11:16 +0000 (12:11 +0300)]
wifi: mac80211: mlme: fix non-inheritence element
There were two bugs when creating the non-inheritence
element:
1) 'at_extension' needs to be declared outside the loop,
otherwise the value resets every iteration and we
can never really switch properly
2) 'added' never got set to true, so we always cut off
the extension element again at the end of the function
This shows another issue that we might add a list but no
extension list, but we need to make the extension list a
zero-length one in that case.
Fix all these issues. While at it, add a comment explaining
the trim.
Fixes:
81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.3addaa5c4782.If3a78f9305997ad7ef4ba7ffc17a8234c956f613@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Sun, 4 Jun 2023 09:11:18 +0000 (12:11 +0300)]
wifi: cfg80211: reject bad AP MLD address
When trying to authenticate, if the AP MLD address isn't
a valid address, mac80211 can throw a warning. Avoid that
by rejecting such addresses.
Fixes:
d648c23024bd ("wifi: nl80211: support MLO in auth/assoc")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.89188912bd1d.I8dbc6c8ee0cb766138803eec59508ef4ce477709@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Sun, 4 Jun 2023 09:11:23 +0000 (12:11 +0300)]
wifi: mac80211: use correct iftype HE cap
We already check that the right iftype capa exists,
but then don't use it. Assign it to a variable so we
can actually use it, and then do that.
Fixes:
bac2fd3d7534 ("mac80211: remove use of ieee80211_get_he_sta_cap()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.0e908e5c5fdd.Iac142549a6144ac949ebd116b921a59ae5282735@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sungwoo Kim [Sat, 3 Jun 2023 12:28:09 +0000 (08:28 -0400)]
Bluetooth: L2CAP: Add missing checks for invalid DCID
When receiving a connect response we should make sure that the DCID is
within the valid range and that we don't already have another channel
allocated for the same DCID.
Missing checks may violate the specification (BLUETOOTH CORE SPECIFICATION
Version 5.4 | Vol 3, Part A, Page 1046).
Fixes:
40624183c202 ("Bluetooth: L2CAP: Add missing checks for invalid LE DCID")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Thu, 1 Jun 2023 06:34:45 +0000 (09:34 +0300)]
Bluetooth: ISO: use correct CIS order in Set CIG Parameters event
The order of CIS handle array in Set CIG Parameters response shall match
the order of the CIS_ID array in the command (Core v5.3 Vol 4 Part E Sec
7.8.97). We send CIS_IDs mainly in the order of increasing CIS_ID (but
with "last" CIS first if it has fixed CIG_ID). In handling of the
reply, we currently assume this is also the same as the order of
hci_conn in hdev->conn_hash, but that is not true.
Match the correct hci_conn to the correct handle by matching them based
on the CIG+CIS combination. The CIG+CIS combination shall be unique for
ISO_LINK hci_conn at state >= BT_BOUND, which we maintain in
hci_le_set_cig_params.
Fixes:
26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Thu, 1 Jun 2023 06:34:44 +0000 (09:34 +0300)]
Bluetooth: ISO: don't try to remove CIG if there are bound CIS left
Consider existing BOUND & CONNECT state CIS to block CIG removal.
Otherwise, under suitable timing conditions we may attempt to remove CIG
while Create CIS is pending, which fails.
Fixes:
26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Ying Hsu [Wed, 31 May 2023 03:44:56 +0000 (03:44 +0000)]
Bluetooth: Fix l2cap_disconnect_req deadlock
L2CAP assumes that the locks conn->chan_lock and chan->lock are
acquired in the order conn->chan_lock, chan->lock to avoid
potential deadlock.
For example, l2sock_shutdown acquires these locks in the order:
mutex_lock(&conn->chan_lock)
l2cap_chan_lock(chan)
However, l2cap_disconnect_req acquires chan->lock in
l2cap_get_chan_by_scid first and then acquires conn->chan_lock
before calling l2cap_chan_del. This means that these locks are
acquired in unexpected order, which leads to potential deadlock:
l2cap_chan_lock(c)
mutex_lock(&conn->chan_lock)
This patch releases chan->lock before acquiring the conn_chan_lock
to avoid the potential deadlock.
Fixes:
a2a9339e1c9d ("Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}")
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Johan Hovold [Wed, 31 May 2023 08:57:59 +0000 (10:57 +0200)]
Bluetooth: hci_qca: fix debugfs registration
Since commit
3e4be65eb82c ("Bluetooth: hci_qca: Add poweroff support
during hci down for wcn3990"), the setup callback which registers the
debugfs interface can be called multiple times.
This specifically leads to the following error when powering on the
controller:
debugfs: Directory 'ibs' with parent 'hci0' already present!
Add a driver flag to avoid trying to register the debugfs interface more
than once.
Fixes:
3e4be65eb82c ("Bluetooth: hci_qca: Add poweroff support during hci down for wcn3990")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Johan Hovold [Wed, 31 May 2023 08:57:58 +0000 (10:57 +0200)]
Bluetooth: fix debugfs registration
Since commit
ec6cef9cd98d ("Bluetooth: Fix SMP channel registration for
unconfigured controllers") the debugfs interface for unconfigured
controllers will be created when the controller is configured.
There is however currently nothing preventing a controller from being
configured multiple time (e.g. setting the device address using btmgmt)
which results in failed attempts to register the already registered
debugfs entries:
debugfs: File 'features' in directory 'hci0' already present!
debugfs: File 'manufacturer' in directory 'hci0' already present!
debugfs: File 'hci_version' in directory 'hci0' already present!
...
debugfs: File 'quirk_simultaneous_discovery' in directory 'hci0' already present!
Add a controller flag to avoid trying to register the debugfs interface
more than once.
Fixes:
ec6cef9cd98d ("Bluetooth: Fix SMP channel registration for unconfigured controllers")
Cc: stable@vger.kernel.org # 4.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Zhengping Jiang [Thu, 25 May 2023 00:11:58 +0000 (17:11 -0700)]
Bluetooth: hci_sync: add lock to protect HCI_UNREGISTER
When the HCI_UNREGISTER flag is set, no jobs should be scheduled. Fix
potential race when HCI_UNREGISTER is set after the flag is tested in
hci_cmd_sync_queue.
Fixes:
0b94f2651f56 ("Bluetooth: hci_sync: Fix queuing commands when HCI_UNREGISTER is set")
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Tue, 30 May 2023 20:48:44 +0000 (13:48 -0700)]
Bluetooth: Fix use-after-free in hci_remove_ltk/hci_remove_irk
Similar to commit
0f7d9b31ce7a ("netfilter: nf_tables: fix use-after-free
in nft_set_catchall_destroy()"). We can not access k after kfree_rcu()
call.
Cc: stable@vger.kernel.org
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Sun, 21 May 2023 15:48:29 +0000 (15:48 +0000)]
Bluetooth: ISO: Fix CIG auto-allocation to select configurable CIG
Make CIG auto-allocation to select the first CIG_ID that is still
configurable. Also use correct CIG_ID range (see Core v5.3 Vol 4 Part E
Sec 7.8.97 p.2553).
Previously, it would always select CIG_ID 0 regardless of anything,
because cis_list with data.cis == 0xff (BT_ISO_QOS_CIS_UNSET) would not
count any CIS. Since we are not adding CIS here, use find_cis instead.
Fixes:
26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Sun, 21 May 2023 15:48:28 +0000 (15:48 +0000)]
Bluetooth: ISO: consider right CIS when removing CIG at cleanup
When looking for CIS blocking CIG removal, consider only the CIS with
the right CIG ID. Don't try to remove CIG with unset CIG ID.
Fixes:
26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Florian Westphal [Mon, 5 Jun 2023 13:14:45 +0000 (15:14 +0200)]
bpf: netfilter: Add BPF_NETFILTER bpf_attach_type
Andrii Nakryiko writes:
And we currently don't have an attach type for NETLINK BPF link.
Thankfully it's not too late to add it. I see that link_create() in
kernel/bpf/syscall.c just bypasses attach_type check. We shouldn't
have done that. Instead we need to add BPF_NETLINK attach type to enum
bpf_attach_type. And wire all that properly throughout the kernel and
libbpf itself.
This adds BPF_NETFILTER and uses it. This breaks uabi but this
wasn't in any non-rc release yet, so it should be fine.
v2: check link_attack prog type in link_create too
Fixes:
84601d6ee68a ("bpf: add bpf_link support for BPF_NETFILTER programs")
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4BzZ69YgrQW7DHCJUT_X+GqMq_ZQQPBwopaJJVGFD5=d5Vg@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20230605131445.32016-1-fw@strlen.de
Benjamin Tissoires [Mon, 5 Jun 2023 16:56:36 +0000 (18:56 +0200)]
HID: hidpp: terminate retry loop on success
It seems we forgot the normal case to terminate the retry loop,
making us asking 3 times each command, which is probably a little bit
too much.
And remove the ugly "goto exit" that can be replaced by a simpler "break"
Fixes:
586e8fede795 ("HID: logitech-hidpp: Retry commands when device is busy")
Suggested-by: Mark Lord <mlord@pobox.com>
Tested-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Linus Torvalds [Mon, 5 Jun 2023 15:31:36 +0000 (11:31 -0400)]
Merge tag 'asym-keys-fix-for-linus-v6.4-rc5' of https://github.com/robertosassu/linux
Pull asymmetric keys fix from Roberto Sassu:
"Here is a small fix to make an unconditional copy of the buffer passed
to crypto operations, to take into account the case of the stack not
in the linear mapping area.
It has been tested and verified to fix the bug"
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David Howells <dhowells@redhat.com>
* tag 'asym-keys-fix-for-linus-v6.4-rc5' of https://github.com/robertosassu/linux:
KEYS: asymmetric: Copy sig and digest in public_key_verify_signature()
David S. Miller [Mon, 5 Jun 2023 14:15:57 +0000 (15:15 +0100)]
Merge branch 'mptcp-addr-adv-fixes'
Mat Martineau says:
====================
mptcp: Fixes for address advertisement
Patches 1 and 2 allow address advertisements to be removed without
affecting current connected subflows, and updates associated self tests.
Patches 3 and 4 correctly track (and allow removal of) addresses that
were implicitly announced as part of subflow creation. Also updates
associated self tests.
Patch 5 makes subflow and address announcement counters work consistently
between the userspace and in-kernel path managers.
====================
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Mon, 5 Jun 2023 03:25:21 +0000 (20:25 -0700)]
mptcp: update userspace pm infos
Increase pm subflows counter on both server side and client side when
userspace pm creates a new subflow, and decrease the counter when it
closes a subflow.
Increase add_addr_signaled counter in mptcp_nl_cmd_announce() when the
address is announced by userspace PM.
This modification is similar to how the in-kernel PM is updating the
counter: when additional subflows are created/removed.
Fixes:
9ab4807c84a4 ("mptcp: netlink: Add MPTCP_PM_CMD_ANNOUNCE")
Fixes:
702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/329
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Mon, 5 Jun 2023 03:25:20 +0000 (20:25 -0700)]
selftests: mptcp: update userspace pm subflow tests
To align with what is done by the in-kernel PM, update userspace pm
subflow selftests, by sending the a remove_addrs command together
before the remove_subflows command. This will get a RM_ADDR in
chk_rm_nr().
Fixes:
d9a4594edabf ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE")
Fixes:
5e986ec46874 ("selftests: mptcp: userspace pm subflow tests")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/379
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Mon, 5 Jun 2023 03:25:19 +0000 (20:25 -0700)]
mptcp: add address into userspace pm list
Add the address into userspace_pm_local_addr_list when the subflow is
created. Make sure it can be found in mptcp_nl_cmd_remove(). And delete
it in the new helper mptcp_userspace_pm_delete_local_addr().
By doing this, the "REMOVE" command also works with subflows that have
been created via the "SUB_CREATE" command instead of restricting to
the addresses that have been announced via the "ANNOUNCE" command.
Fixes:
d9a4594edabf ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/379
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Mon, 5 Jun 2023 03:25:18 +0000 (20:25 -0700)]
selftests: mptcp: update userspace pm addr tests
This patch is linked to the previous commit ("mptcp: only send RM_ADDR in
nl_cmd_remove").
To align with what is done by the in-kernel PM, update userspace pm addr
selftests, by sending a remove_subflows command together after the
remove_addrs command.
Fixes:
d9a4594edabf ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE")
Fixes:
97040cf9806e ("selftests: mptcp: userspace pm address tests")
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Mon, 5 Jun 2023 03:25:17 +0000 (20:25 -0700)]
mptcp: only send RM_ADDR in nl_cmd_remove
The specifications from [1] about the "REMOVE" command say:
Announce that an address has been lost to the peer
It was then only supposed to send a RM_ADDR and not trying to delete
associated subflows.
A new helper mptcp_pm_remove_addrs() is then introduced to do just
that, compared to mptcp_pm_remove_addrs_and_subflows() also removing
subflows.
To delete a subflow, the userspace daemon can use the "SUB_DESTROY"
command, see mptcp_nl_cmd_sf_destroy().
Fixes:
d9a4594edabf ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE")
Link: https://github.com/multipath-tcp/mptcp/blob/mptcp_v0.96/include/uapi/linux/mptcp.h
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bartosz Golaszewski [Fri, 2 Jun 2023 19:04:55 +0000 (21:04 +0200)]
net: stmmac: dwmac-qcom-ethqos: fix a regression on EMAC < 3
We must not assign plat_dat->dwmac4_addrs unconditionally as for
structures which don't set them, this will result in the core driver
using zeroes everywhere and breaking the driver for older HW. On EMAC < 2
the address should remain NULL.
Fixes:
b68376191c69 ("net: stmmac: dwmac-qcom-ethqos: Add EMAC3 support")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 5 Jun 2023 10:21:10 +0000 (11:21 +0100)]
Merge tag 'linux-can-fixes-for-6.4-
20230605' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
this is a pull request of 3 patches for net/master.
All 3 patches target the j1939 stack.
The 1st patch is by Oleksij Rempel and fixes the error queue handling
for (E)TP sessions that run into timeouts.
The last 2 patches are by Fedor Pchelkin and fix a potential
use-after-free in j1939_netdev_start() if j1939_can_rx_register()
fails.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 2 Jun 2023 12:37:47 +0000 (12:37 +0000)]
net/sched: fq_pie: ensure reasonable TCA_FQ_PIE_QUANTUM values
We got multiple syzbot reports, all duplicates of the following [1]
syzbot managed to install fq_pie with a zero TCA_FQ_PIE_QUANTUM,
thus triggering infinite loops.
Use limits similar to sch_fq, with commits
3725a269815b ("pkt_sched: fq: avoid hang when quantum 0") and
d9e15a273306 ("pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM")
[1]
watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:0]
Modules linked in:
irq event stamp: 172817
hardirqs last enabled at (172816): [<
ffff80001242fde4>] __el1_irq arch/arm64/kernel/entry-common.c:476 [inline]
hardirqs last enabled at (172816): [<
ffff80001242fde4>] el1_interrupt+0x58/0x68 arch/arm64/kernel/entry-common.c:486
hardirqs last disabled at (172817): [<
ffff80001242fdb0>] __el1_irq arch/arm64/kernel/entry-common.c:468 [inline]
hardirqs last disabled at (172817): [<
ffff80001242fdb0>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:486
softirqs last enabled at (167634): [<
ffff800008020c1c>] softirq_handle_end kernel/softirq.c:414 [inline]
softirqs last enabled at (167634): [<
ffff800008020c1c>] __do_softirq+0xac0/0xd54 kernel/softirq.c:600
softirqs last disabled at (167701): [<
ffff80000802a660>] ____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:80
CPU: 0 PID: 0 Comm: swapper/0 Not tainted
6.4.0-rc3-syzkaller-geb0f1697d729 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023
pstate:
80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : fq_pie_qdisc_dequeue+0x10c/0x8ac net/sched/sch_fq_pie.c:246
lr : fq_pie_qdisc_dequeue+0xe4/0x8ac net/sched/sch_fq_pie.c:240
sp :
ffff800008007210
x29:
ffff800008007280 x28:
ffff0000c86f7890 x27:
ffff0000cb20c2e8
x26:
ffff0000cb20c2f0 x25:
dfff800000000000 x24:
ffff0000cb20c2e0
x23:
ffff0000c86f7880 x22:
0000000000000040 x21:
1fffe000190def10
x20:
ffff0000cb20c2e0 x19:
ffff0000cb20c2e0 x18:
ffff800008006e60
x17:
0000000000000000 x16:
ffff80000850af6c x15:
0000000000000302
x14:
0000000000000100 x13:
0000000000000000 x12:
0000000000000001
x11:
0000000000000302 x10:
0000000000000100 x9 :
0000000000000000
x8 :
0000000000000000 x7 :
ffff80000841c468 x6 :
0000000000000000
x5 :
0000000000000001 x4 :
0000000000000001 x3 :
0000000000000000
x2 :
ffff0000cb20c2e0 x1 :
ffff0000cb20c2e0 x0 :
0000000000000001
Call trace:
fq_pie_qdisc_dequeue+0x10c/0x8ac net/sched/sch_fq_pie.c:246
dequeue_skb net/sched/sch_generic.c:292 [inline]
qdisc_restart net/sched/sch_generic.c:397 [inline]
__qdisc_run+0x1fc/0x231c net/sched/sch_generic.c:415
__dev_xmit_skb net/core/dev.c:3868 [inline]
__dev_queue_xmit+0xc80/0x3318 net/core/dev.c:4210
dev_queue_xmit include/linux/netdevice.h:3085 [inline]
neigh_connected_output+0x2f8/0x38c net/core/neighbour.c:1581
neigh_output include/net/neighbour.h:544 [inline]
ip6_finish_output2+0xd60/0x1a1c net/ipv6/ip6_output.c:134
__ip6_finish_output net/ipv6/ip6_output.c:195 [inline]
ip6_finish_output+0x538/0x8c8 net/ipv6/ip6_output.c:206
NF_HOOK_COND include/linux/netfilter.h:292 [inline]
ip6_output+0x270/0x594 net/ipv6/ip6_output.c:227
dst_output include/net/dst.h:458 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ndisc_send_skb+0xc30/0x1790 net/ipv6/ndisc.c:508
ndisc_send_rs+0x47c/0x5d4 net/ipv6/ndisc.c:718
addrconf_rs_timer+0x300/0x58c net/ipv6/addrconf.c:3936
call_timer_fn+0x19c/0x8cc kernel/time/timer.c:1700
expire_timers kernel/time/timer.c:1751 [inline]
__run_timers+0x55c/0x734 kernel/time/timer.c:2022
run_timer_softirq+0x7c/0x114 kernel/time/timer.c:2035
__do_softirq+0x2d0/0xd54 kernel/softirq.c:571
____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:80
call_on_irq_stack+0x24/0x4c arch/arm64/kernel/entry.S:882
do_softirq_own_stack+0x20/0x2c arch/arm64/kernel/irq.c:85
invoke_softirq kernel/softirq.c:452 [inline]
__irq_exit_rcu+0x28c/0x534 kernel/softirq.c:650
irq_exit_rcu+0x14/0x84 kernel/softirq.c:662
__el1_irq arch/arm64/kernel/entry-common.c:472 [inline]
el1_interrupt+0x38/0x68 arch/arm64/kernel/entry-common.c:486
el1h_64_irq_handler+0x18/0x24 arch/arm64/kernel/entry-common.c:491
el1h_64_irq+0x64/0x68 arch/arm64/kernel/entry.S:587
__daif_local_irq_enable arch/arm64/include/asm/irqflags.h:33 [inline]
arch_local_irq_enable+0x8/0xc arch/arm64/include/asm/irqflags.h:55
cpuidle_idle_call kernel/sched/idle.c:170 [inline]
do_idle+0x1f0/0x4e8 kernel/sched/idle.c:282
cpu_startup_entry+0x24/0x28 kernel/sched/idle.c:379
rest_init+0x2dc/0x2f4 init/main.c:735
start_kernel+0x0/0x55c init/main.c:834
start_kernel+0x3f0/0x55c init/main.c:1088
__primary_switched+0xb8/0xc0 arch/arm64/kernel/head.S:523
Fixes:
ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marc Kleine-Budde [Mon, 5 Jun 2023 06:27:23 +0000 (08:27 +0200)]
Merge patch series "can: j1939: avoid possible use-after-free when j1939_can_rx_register fails"
Fedor Pchelkin <pchelkin@ispras.ru> says:
The patch series fixes a possible racy use-after-free scenario
described in 2/2: if j1939_can_rx_register() fails then the concurrent
thread may have already read the invalid priv structure.
The 1/2 makes j1939_netdev_lock a mutex so that access to
j1939_can_rx_register() can be serialized without changing GFP_KERNEL
to GFP_ATOMIC inside can_rx_register(). This seems to be safe.
Note that the patch series has been tested only via Syzkaller and not
with a real device.
Link: https://lore.kernel.org/r/20230526171910.227615-1-pchelkin@ispras.ru
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Fedor Pchelkin [Fri, 26 May 2023 17:19:10 +0000 (20:19 +0300)]
can: j1939: avoid possible use-after-free when j1939_can_rx_register fails
Syzkaller reports the following failure:
BUG: KASAN: use-after-free in kref_put include/linux/kref.h:64 [inline]
BUG: KASAN: use-after-free in j1939_priv_put+0x25/0xa0 net/can/j1939/main.c:172
Write of size 4 at addr
ffff888141c15058 by task swapper/3/0
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.10.144-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x107/0x167 lib/dump_stack.c:118
print_address_description.constprop.0+0x1c/0x220 mm/kasan/report.c:385
__kasan_report mm/kasan/report.c:545 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:562
check_memory_region_inline mm/kasan/generic.c:186 [inline]
check_memory_region+0x145/0x190 mm/kasan/generic.c:192
instrument_atomic_read_write include/linux/instrumented.h:101 [inline]
atomic_fetch_sub_release include/asm-generic/atomic-instrumented.h:220 [inline]
__refcount_sub_and_test include/linux/refcount.h:272 [inline]
__refcount_dec_and_test include/linux/refcount.h:315 [inline]
refcount_dec_and_test include/linux/refcount.h:333 [inline]
kref_put include/linux/kref.h:64 [inline]
j1939_priv_put+0x25/0xa0 net/can/j1939/main.c:172
j1939_sk_sock_destruct+0x44/0x90 net/can/j1939/socket.c:374
__sk_destruct+0x4e/0x820 net/core/sock.c:1784
rcu_do_batch kernel/rcu/tree.c:2485 [inline]
rcu_core+0xb35/0x1a30 kernel/rcu/tree.c:2726
__do_softirq+0x289/0x9a3 kernel/softirq.c:298
asm_call_irq_on_stack+0x12/0x20
</IRQ>
__run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline]
run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline]
do_softirq_own_stack+0xaa/0xe0 arch/x86/kernel/irq_64.c:77
invoke_softirq kernel/softirq.c:393 [inline]
__irq_exit_rcu kernel/softirq.c:423 [inline]
irq_exit_rcu+0x136/0x200 kernel/softirq.c:435
sysvec_apic_timer_interrupt+0x4d/0x100 arch/x86/kernel/apic/apic.c:1095
asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:635
Allocated by task 1141:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc.constprop.0+0xc9/0xd0 mm/kasan/common.c:461
kmalloc include/linux/slab.h:552 [inline]
kzalloc include/linux/slab.h:664 [inline]
j1939_priv_create net/can/j1939/main.c:131 [inline]
j1939_netdev_start+0x111/0x860 net/can/j1939/main.c:268
j1939_sk_bind+0x8ea/0xd30 net/can/j1939/socket.c:485
__sys_bind+0x1f2/0x260 net/socket.c:1645
__do_sys_bind net/socket.c:1656 [inline]
__se_sys_bind net/socket.c:1654 [inline]
__x64_sys_bind+0x6f/0xb0 net/socket.c:1654
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Freed by task 1141:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
kasan_set_track+0x1c/0x30 mm/kasan/common.c:56
kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355
__kasan_slab_free+0x112/0x170 mm/kasan/common.c:422
slab_free_hook mm/slub.c:1542 [inline]
slab_free_freelist_hook+0xad/0x190 mm/slub.c:1576
slab_free mm/slub.c:3149 [inline]
kfree+0xd9/0x3b0 mm/slub.c:4125
j1939_netdev_start+0x5ee/0x860 net/can/j1939/main.c:300
j1939_sk_bind+0x8ea/0xd30 net/can/j1939/socket.c:485
__sys_bind+0x1f2/0x260 net/socket.c:1645
__do_sys_bind net/socket.c:1656 [inline]
__se_sys_bind net/socket.c:1654 [inline]
__x64_sys_bind+0x6f/0xb0 net/socket.c:1654
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x61/0xc6
It can be caused by this scenario:
CPU0 CPU1
j1939_sk_bind(socket0, ndev0, ...)
j1939_netdev_start()
j1939_sk_bind(socket1, ndev0, ...)
j1939_netdev_start()
mutex_lock(&j1939_netdev_lock)
j1939_priv_set(ndev0, priv)
mutex_unlock(&j1939_netdev_lock)
if (priv_new)
kref_get(&priv_new->rx_kref)
return priv_new;
/* inside j1939_sk_bind() */
jsk->priv = priv
j1939_can_rx_register(priv) // fails
j1939_priv_set(ndev, NULL)
kfree(priv)
j1939_sk_sock_destruct()
j1939_priv_put() // <- uaf
To avoid this, call j1939_can_rx_register() under j1939_netdev_lock so
that a concurrent thread cannot process j1939_priv before
j1939_can_rx_register() returns.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes:
9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20230526171910.227615-3-pchelkin@ispras.ru
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Fedor Pchelkin [Fri, 26 May 2023 17:19:09 +0000 (20:19 +0300)]
can: j1939: change j1939_netdev_lock type to mutex
It turns out access to j1939_can_rx_register() needs to be serialized,
otherwise j1939_priv can be corrupted when parallel threads call
j1939_netdev_start() and j1939_can_rx_register() fails. This issue is
thoroughly covered in other commit which serializes access to
j1939_can_rx_register().
Change j1939_netdev_lock type to mutex so that we do not need to remove
GFP_KERNEL from can_rx_register().
j1939_netdev_lock seems to be used in normal contexts where mutex usage
is not prohibited.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes:
9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Suggested-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20230526171910.227615-2-pchelkin@ispras.ru
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oleksij Rempel [Fri, 26 May 2023 08:19:46 +0000 (10:19 +0200)]
can: j1939: j1939_sk_send_loop_abort(): improved error queue handling in J1939 Socket
This patch addresses an issue within the j1939_sk_send_loop_abort()
function in the j1939/socket.c file, specifically in the context of
Transport Protocol (TP) sessions.
Without this patch, when a TP session is initiated and a Clear To Send
(CTS) frame is received from the remote side requesting one data packet,
the kernel dispatches the first Data Transport (DT) frame and then waits
for the next CTS. If the remote side doesn't respond with another CTS,
the kernel aborts due to a timeout. This leads to the user-space
receiving an EPOLLERR on the socket, and the socket becomes active.
However, when trying to read the error queue from the socket with
sock.recvmsg(, , socket.MSG_ERRQUEUE), it returns -EAGAIN,
given that the socket is non-blocking. This situation results in an
infinite loop: the user-space repeatedly calls epoll(), epoll() returns
the socket file descriptor with EPOLLERR, but the socket then blocks on
the recv() of ERRQUEUE.
This patch introduces an additional check for the J1939_SOCK_ERRQUEUE
flag within the j1939_sk_send_loop_abort() function. If the flag is set,
it indicates that the application has subscribed to receive error queue
messages. In such cases, the kernel can communicate the current transfer
state via the error queue. This allows for the function to return early,
preventing the unnecessary setting of the socket into an error state,
and breaking the infinite loop. It is crucial to note that a socket
error is only needed if the application isn't using the error queue, as,
without it, the application wouldn't be aware of transfer issues.
Fixes:
9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Reported-by: David Jander <david@protonic.nl>
Tested-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20230526081946.715190-1-o.rempel@pengutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Dave Chinner [Mon, 5 Jun 2023 04:48:15 +0000 (14:48 +1000)]
xfs: collect errors from inodegc for unlinked inode recovery
Unlinked list recovery requires errors removing the inode the from
the unlinked list get fed back to the main recovery loop. Now that
we offload the unlinking to the inodegc work, we don't get errors
being fed back when we trip over a corruption that prevents the
inode from being removed from the unlinked list.
This means we never clear the corrupt unlinked list bucket,
resulting in runtime operations eventually tripping over it and
shutting down.
Fix this by collecting inodegc worker errors and feed them
back to the flush caller. This is largely best effort - the only
context that really cares is log recovery, and it only flushes a
single inode at a time so we don't need complex synchronised
handling. Essentially the inodegc workers will capture the first
error that occurs and the next flush will gather them and clear
them. The flush itself will only report the first gathered error.
In the cases where callers can return errors, propagate the
collected inodegc flush error up the error handling chain.
In the case of inode unlinked list recovery, there are several
superfluous calls to flush queued unlinked inodes -
xlog_recover_iunlink_bucket() guarantees that it has flushed the
inodegc and collected errors before it returns. Hence nothing in the
calling path needs to run a flush, even when an error is returned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Dave Chinner [Mon, 5 Jun 2023 04:48:15 +0000 (14:48 +1000)]
xfs: validate block number being freed before adding to xefi
Bad things happen in defered extent freeing operations if it is
passed a bad block number in the xefi. This can come from a bogus
agno/agbno pair from deferred agfl freeing, or just a bad fsbno
being passed to __xfs_free_extent_later(). Either way, it's very
difficult to diagnose where a null perag oops in EFI creation
is coming from when the operation that queued the xefi has already
been completed and there's no longer any trace of it around....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Dave Chinner [Mon, 5 Jun 2023 04:48:15 +0000 (14:48 +1000)]
xfs: validity check agbnos on the AGFL
If the agfl or the indexing in the AGF has been corrupted, getting a
block form the AGFL could return an invalid block number. If this
happens, bad things happen. Check the agbno we pull off the AGFL
and return -EFSCORRUPTED if we find somethign bad.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Dave Chinner [Mon, 5 Jun 2023 04:48:15 +0000 (14:48 +1000)]
xfs: fix agf/agfl verification on v4 filesystems
When a v4 filesystem has fl_last - fl_first != fl_count, we do not
not detect the corruption and allow the AGF to be used as it if was
fully valid. On V5 filesystems, we reset the AGFL to empty in these
cases and avoid the corruption at a small cost of leaked blocks.
If we don't catch the corruption on V4 filesystems, bad things
happen later when an allocation attempts to trim the free list
and either double-frees stale entries in the AGFl or tries to free
NULLAGBNO entries.
Either way, this is bad. Prevent this from happening by using the
AGFL_NEED_RESET logic for v4 filesysetms, too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Dave Chinner [Mon, 5 Jun 2023 04:48:15 +0000 (14:48 +1000)]
xfs: fix double xfs_perag_rele() in xfs_filestream_pick_ag()
xfs_bmap_longest_free_extent() can return an error when accessing
the AGF fails. In this case, the behaviour of
xfs_filestream_pick_ag() is conditional on the error. We may
continue the loop, or break out of it. The error handling after the
loop cleans up the perag reference held when the break occurs. If we
continue, the next loop iteration handles cleaning up the perag
reference.
EIther way, we don't need to release the active perag reference when
xfs_bmap_longest_free_extent() fails. Doing so means we do a double
decrement on the active reference count, and this causes tha active
reference count to fall to zero. At this point, new active
references will fail.
This leads to unmount hanging because it tries to grab active
references to that perag, only for it to fail. This happens inside a
loop that retries until a inode tree radix tree tag is cleared,
which cannot happen because we can't get an active reference to the
perag.
The unmount livelocks in this path:
xfs_reclaim_inodes+0x80/0xc0
xfs_unmount_flush_inodes+0x5b/0x70
xfs_unmountfs+0x5b/0x1a0
xfs_fs_put_super+0x49/0x110
generic_shutdown_super+0x7c/0x1a0
kill_block_super+0x27/0x50
deactivate_locked_super+0x30/0x90
deactivate_super+0x3c/0x50
cleanup_mnt+0xc2/0x160
__cleanup_mnt+0x12/0x20
task_work_run+0x5e/0xa0
exit_to_user_mode_prepare+0x1bc/0x1c0
syscall_exit_to_user_mode+0x16/0x40
do_syscall_64+0x40/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Fixes:
eb70aa2d8ed9 ("xfs: use for_each_perag_wrap in xfs_filestream_pick_ag")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 5 Jun 2023 04:48:12 +0000 (14:48 +1000)]
xfs: fix broken logic when detecting mergeable bmap records
Commit
6bc6c99a944c was a well-intentioned effort to initiate
consolidation of adjacent bmbt mapping records by setting the PREEN
flag. Consolidation can only happen if the length of the combined
record doesn't overflow the 21-bit blockcount field of the bmbt
recordset. Unfortunately, the length test is inverted, leading to it
triggering on data forks like these:
EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL
0: [0..
16777207]:
76110848..
92888055 0 (
76110848..
92888055)
16777208
1: [
16777208..
20639743]:
92888056..
96750591 0 (
92888056..
96750591)
3862536
Note that record 0 has a length of
16777208 512b blocks. This
corresponds to
2097151 4k fsblocks, which is the maximum. Hence the two
records cannot be merged.
However, the logic is still wrong even if we change the in-loop
comparison, because the scope of our examination isn't broad enough
inside the loop to detect mappings like this:
0: [0..9]:
76110838..
76110847 0 (
76110838..
76110847) 10
1: [10..
16777217]:
76110848..
92888055 0 (
76110848..
92888055)
16777208
2: [
16777218..
20639753]:
92888056..
96750591 0 (
92888056..
96750591)
3862536
These three records could be merged into two, but one cannot determine
this purely from looking at records 0-1 or 1-2 in isolation.
Hoist the mergability detection outside the loop, and base its decision
making on whether or not a merged mapping could be expressed in fewer
bmbt records. While we're at it, fix the incorrect return type of the
iter function.
Fixes:
336642f79283 ("xfs: alert the user about data/attr fork mappings that could be merged")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Geert Uytterhoeven [Sun, 4 Jun 2023 18:09:27 +0000 (04:09 +1000)]
xfs: Fix undefined behavior of shift into sign bit
With gcc-5:
In file included from ./include/trace/define_trace.h:102:0,
from ./fs/xfs/scrub/trace.h:988,
from fs/xfs/scrub/trace.c:40:
./fs/xfs/./scrub/trace.h: In function ‘trace_raw_output_xchk_fsgate_class’:
./fs/xfs/scrub/scrub.h:111:28: error: initializer element is not constant
#define XREP_ALREADY_FIXED (1 << 31) /* checking our repair work */
^
Shifting the (signed) value 1 into the sign bit is undefined behavior.
Fix this for all definitions in the file by shifting "1U" instead of
"1".
This was exposed by the first user added in commit
466c525d6d35e691
("xfs: minimize overhead of drain wakeups by using jump labels").
Fixes:
160b5a784525e8a4 ("xfs: hoist the already_fixed variable to the scrub context")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Dave Chinner [Sun, 4 Jun 2023 18:08:27 +0000 (04:08 +1000)]
xfs: fix AGF vs inode cluster buffer deadlock
Lock order in XFS is AGI -> AGF, hence for operations involving
inode unlinked list operations we always lock the AGI first. Inode
unlinked list operations operate on the inode cluster buffer,
so the lock order there is AGI -> inode cluster buffer.
For O_TMPFILE operations, this now means the lock order set down in
xfs_rename and xfs_link is AGI -> inode cluster buffer -> AGF as the
unlinked ops are done before the directory modifications that may
allocate space and lock the AGF.
Unfortunately, we also now lock the inode cluster buffer when
logging an inode so that we can attach the inode to the cluster
buffer and pin it in memory. This creates a lock order of AGF ->
inode cluster buffer in directory operations as we have to log the
inode after we've allocated new space for it.
This creates a lock inversion between the AGF and the inode cluster
buffer. Because the inode cluster buffer is shared across multiple
inodes, the inversion is not specific to individual inodes but can
occur when inodes in the same cluster buffer are accessed in
different orders.
To fix this we need move all the inode log item cluster buffer
interactions to the end of the current transaction. Unfortunately,
xfs_trans_log_inode() calls are littered throughout the transactions
with no thought to ordering against other items or locking. This
makes it difficult to do anything that involves changing the call
sites of xfs_trans_log_inode() to change locking orders.
However, we do now have a mechanism that allows is to postpone dirty
item processing to just before we commit the transaction: the
->iop_precommit method. This will be called after all the
modifications are done and high level objects like AGI and AGF
buffers have been locked and modified, thereby providing a mechanism
that guarantees we don't lock the inode cluster buffer before those
high level objects are locked.
This change is largely moving the guts of xfs_trans_log_inode() to
xfs_inode_item_precommit() and providing an extra flag context in
the inode log item to track the dirty state of the inode in the
current transaction. This also means we do a lot less repeated work
in xfs_trans_log_inode() by only doing it once per transaction when
all the work is done.
Fixes:
298f7bec503f ("xfs: pin inode backing buffer to the inode log item")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Dave Chinner [Sun, 4 Jun 2023 18:07:27 +0000 (04:07 +1000)]
xfs: defered work could create precommits
To fix a AGI-AGF-inode cluster buffer deadlock, we need to move
inode cluster buffer operations to the ->iop_precommit() method.
However, this means that deferred operations can require precommits
to be run on the final transaction that the deferred ops pass back
to xfs_trans_commit() context. This will be exposed by attribute
handling, in that the last changes to the inode in the attr set
state machine "disappear" because the precommit operation is not run.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>