OSDN Git Service
Junio C Hamano [Wed, 6 Jul 2016 20:08:02 +0000 (13:08 -0700)]
More fixes for 2.9.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 6 Jul 2016 20:06:46 +0000 (13:06 -0700)]
Merge branch 'jc/deref-tag' into maint
Code clean-up.
* jc/deref-tag:
blame, line-log: do not loop around deref_tag()
Junio C Hamano [Wed, 6 Jul 2016 20:06:45 +0000 (13:06 -0700)]
Merge branch 'pb/strbuf-read-file-doc' into maint
Minor doc update.
* pb/strbuf-read-file-doc:
strbuf: describe the return value of strbuf_read_file
Junio C Hamano [Wed, 6 Jul 2016 20:06:44 +0000 (13:06 -0700)]
Merge branch 'jk/fetch-prune-doc' into maint
Minor doc update.
* jk/fetch-prune-doc:
fetch: document that pruning happens before fetching
Junio C Hamano [Wed, 6 Jul 2016 20:06:43 +0000 (13:06 -0700)]
Merge branch 'pc/occurred' into maint
Typofix.
* pc/occurred:
config.c: fix misspelt "occurred" in an error message
refs.h: fix misspelt "occurred" in a comment
Junio C Hamano [Wed, 6 Jul 2016 20:06:42 +0000 (13:06 -0700)]
Merge branch 'mg/cherry-pick-multi-on-unborn' into maint
"git cherry-pick A" worked on an unborn branch, but "git
cherry-pick A..B" didn't.
* mg/cherry-pick-multi-on-unborn:
cherry-pick: allow to pick to unborn branches
Junio C Hamano [Wed, 6 Jul 2016 20:06:41 +0000 (13:06 -0700)]
Merge branch 'em/newer-freebsd-shells-are-fine-with-returns' into maint
Comments about misbehaving FreeBSD shells have been clarified with
the version number (9.x and before are broken, newer ones are OK).
* em/newer-freebsd-shells-are-fine-with-returns:
rebase: update comment about FreeBSD /bin/sh
Junio C Hamano [Wed, 6 Jul 2016 20:06:40 +0000 (13:06 -0700)]
Merge branch 'lv/status-say-working-tree-not-directory' into maint
"git status" used to say "working directory" when it meant "working
tree".
* lv/status-say-working-tree-not-directory:
Use "working tree" instead of "working directory" for git status
Junio C Hamano [Wed, 6 Jul 2016 20:06:40 +0000 (13:06 -0700)]
Merge branch 'nb/gnome-keyring-build' into maint
Build improvements for gnome-keyring (in contrib/)
* nb/gnome-keyring-build:
gnome-keyring: Don't hard-code pkg-config executable
Junio C Hamano [Wed, 6 Jul 2016 20:06:39 +0000 (13:06 -0700)]
Merge branch 'et/add-chmod-x' into maint
"git update-index --add --chmod=+x file" may be usable as an escape
hatch, but not a friendly thing to force for people who do need to
use it regularly. "git add --chmod=+x file" can be used instead.
* et/add-chmod-x:
add: add --chmod=+x / --chmod=-x options
Junio C Hamano [Wed, 6 Jul 2016 20:06:39 +0000 (13:06 -0700)]
Merge branch 'jk/avoid-unbounded-alloca' into maint
A codepath that used alloca(3) to place an unbounded amount of data
on the stack has been updated to avoid doing so.
* jk/avoid-unbounded-alloca:
tree-diff: avoid alloca for large allocations
Junio C Hamano [Wed, 6 Jul 2016 20:06:38 +0000 (13:06 -0700)]
Merge branch 'rj/compat-regex-size-max-fix' into maint
A compilation fix.
* rj/compat-regex-size-max-fix:
regex: fix a SIZE_MAX macro redefinition warning
Junio C Hamano [Wed, 6 Jul 2016 20:06:38 +0000 (13:06 -0700)]
Merge branch 'vs/prompt-avoid-unset-variable' into maint
The git-prompt scriptlet (in contrib/) was not friendly with those
who uses "set -u", which has been fixed.
* vs/prompt-avoid-unset-variable:
git-prompt.sh: Don't error on null ${ZSH,BASH}_VERSION, $short_sha
Junio C Hamano [Wed, 6 Jul 2016 20:06:37 +0000 (13:06 -0700)]
Merge branch 'sg/reflog-past-root' into maint
"git reflog" stopped upon seeing an entry that denotes a branch
creation event (aka "unborn"), which made it appear as if the
reflog was truncated.
* sg/reflog-past-root:
reflog: continue walking the reflog past root commits
Junio C Hamano [Wed, 6 Jul 2016 20:06:36 +0000 (13:06 -0700)]
Merge branch 'dn/gpg-doc' into maint
The documentation tries to consistently spell "GPG"; when
referring to the specific program name, "gpg" is used.
* dn/gpg-doc:
Documentation: GPG capitalization
Junio C Hamano [Wed, 6 Jul 2016 20:06:35 +0000 (13:06 -0700)]
Merge branch 'ap/git-svn-propset-doc' into maint
"git svn propset" subcommand that was added in 2.3 days is
documented now.
* ap/git-svn-propset-doc:
git-svn: document the 'git svn propset' command
Junio C Hamano [Wed, 6 Jul 2016 20:06:34 +0000 (13:06 -0700)]
Merge branch 'tr/doc-tt' into maint
The documentation set has been updated so that literal commands,
configuration variables and environment variables are consistently
typeset in fixed-width font and bold in manpages.
* tr/doc-tt:
doc: change configuration variables format
doc: more consistency in environment variables format
doc: change environment variables format
doc: clearer rule about formatting literals
David Turner [Mon, 4 Jul 2016 06:05:24 +0000 (02:05 -0400)]
mailmap: use main email address for dturner
Signed-off-by: David Turner <novalis@novalis.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 27 Jun 2016 16:59:51 +0000 (09:59 -0700)]
Start preparing for 2.9.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 27 Jun 2016 16:56:24 +0000 (09:56 -0700)]
Merge branch 'rs/xdiff-hunk-with-func-line' into maint
"git show -W" (extend hunks to cover the entire function, delimited
by lines that match the "funcname" pattern) used to show the entire
file when a change added an entire function at the end of the file,
which has been fixed.
* rs/xdiff-hunk-with-func-line:
xdiff: fix merging of appended hunk with -W
grep: -W: don't extend context to trailing empty lines
t7810: add test for grep -W and trailing empty context lines
xdiff: don't trim common tail with -W
xdiff: -W: don't include common trailing empty lines in context
xdiff: ignore empty lines before added functions with -W
xdiff: handle appended chunks better with -W
xdiff: factor out match_func_rec()
t4051: rewrite, add more tests
Junio C Hamano [Mon, 27 Jun 2016 16:56:24 +0000 (09:56 -0700)]
Merge branch 'jk/rev-list-count-with-bitmap' into maint
"git rev-list --count" whose walk-length is limited with "-n"
option did not work well with the counting optimized to look at the
bitmap index.
* jk/rev-list-count-with-bitmap:
rev-list: disable bitmaps when "-n" is used with listing objects
rev-list: "adjust" results of "--count --use-bitmap-index -n"
Junio C Hamano [Mon, 27 Jun 2016 16:56:23 +0000 (09:56 -0700)]
Merge branch 'et/pretty-format-c-auto' into maint
The commands in `git log` family take %C(auto) in a custom format
string. This unconditionally turned the color on, ignoring
--no-color or with --color=auto when the output is not connected to
a tty; this was corrected to make the format truly behave as
"auto".
* et/pretty-format-c-auto:
format_commit_message: honor `color=auto` for `%C(auto)`
Junio C Hamano [Mon, 27 Jun 2016 16:56:22 +0000 (09:56 -0700)]
Merge branch 'ew/daemon-socket-keepalive' into maint
When "git daemon" is run without --[init-]timeout specified, a
connection from a client that silently goes offline can hang around
for a long time, wasting resources. The socket-level KEEPALIVE has
been enabled to allow the OS to notice such failed connections.
* ew/daemon-socket-keepalive:
daemon: enable SO_KEEPALIVE for all sockets
Ed Maste [Fri, 17 Jun 2016 15:33:29 +0000 (11:33 -0400)]
rebase: update comment about FreeBSD /bin/sh
Commit
9f50d32 introduced a fix for FreeBSD /bin/sh misbehaviour
when dot-sourcing a file containing "return" statements outside of
any function, from a function in another shell script. That issue
affects FreeBSD 9.x, and is not present in the /bin/sh in FreeBSD
10.3 and later. Update the comment to clarify this.
The example from
9f50d32's commit message produces the expected output
on FreeBSD 10.3 and -CURRENT (the upcoming 11.0):
% sh script1.sh
only this line should show
%
Signed-off-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dave Nicolson [Thu, 16 Jun 2016 22:15:44 +0000 (22:15 +0000)]
Documentation: GPG capitalization
When "GPG" is used in a sentence it is now consistently capitalized.
When referring to the binary it is left as "gpg".
Signed-off-by: David Nicolson <david.nicolson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alfred Perlstein [Wed, 15 Jun 2016 05:19:50 +0000 (22:19 -0700)]
git-svn: document the 'git svn propset' command
Add example usage to the git-svn documentation.
Reported-by: Joseph Pecoraro <pecoraro@apple.com>
Signed-off-by: Alfred Perlstein <alfred@freebsd.org>
Reviewed-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 14 Jun 2016 20:38:14 +0000 (13:38 -0700)]
blame, line-log: do not loop around deref_tag()
These callers appear to expect that deref_tag() is to peel one layer
of a tag, but the function does not work that way; it has its own
loop to unwrap tags until an object that is not a tag appears.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Heiko Becker [Tue, 14 Jun 2016 11:27:05 +0000 (13:27 +0200)]
gnome-keyring: Don't hard-code pkg-config executable
Helpful if your pkg-config executable has a prefix based on the
architecture, for example.
Signed-off-by: Heiko Becker <heirecka@exherbo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Tue, 14 Jun 2016 06:14:11 +0000 (11:44 +0530)]
strbuf: describe the return value of strbuf_read_file
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 13 Jun 2016 23:58:51 +0000 (19:58 -0400)]
fetch: document that pruning happens before fetching
This was changed in
10a6cc8 (fetch --prune: Run prune before
fetching, 2014-01-02), but it seems that nobody in that
discussion realized we were advertising the "after"
explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 13 Jun 2016 17:42:13 +0000 (10:42 -0700)]
Git 2.9
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 13 Jun 2016 01:00:57 +0000 (18:00 -0700)]
Merge tag 'l10n-2.9.0-rc0' of git://github.com/git-l10n/git-po
l10n-2.9.0-rc0
* tag 'l10n-2.9.0-rc0' of git://github.com/git-l10n/git-po:
l10n: ko.po: Update Korean translation
l10n: ru.po: update Russian translation
l10n: de.po: translate 104 new messages
l10n: zh_CN: review for git v2.9.0 l10n round 1
l10n: zh_CN: for git v2.9.0 l10n round 1
l10n: pt_PT: update Portuguese translation
l10n: pt_PT: update according to git-gui glossary
l10n: pt_PT: merge git.pot file
l10n: Updated Bulgarian translation of git (2597t,0f,0u)
l10n: sv.po: Update Swedish translation (2597t0f0u)
l10n: fr.po v2.9.0rnd1
l10n: Updated Vietnamese translation (2597t)
l10n: git.pot: v2.9.0 round 1 (104 new, 37 removed)
l10n: fr.po Fixed grammar mistake
Changwoo Ryu [Sat, 11 Jun 2016 16:25:58 +0000 (01:25 +0900)]
l10n: ko.po: Update Korean translation
Jiang Xin [Sat, 11 Jun 2016 12:21:52 +0000 (20:21 +0800)]
Merge branch 'russian-l10n' of https://github.com/DJm00n/git-po-ru
* 'russian-l10n' of https://github.com/DJm00n/git-po-ru:
l10n: ru.po: update Russian translation
Dimitriy Ryazantcev [Sat, 11 Jun 2016 09:53:43 +0000 (12:53 +0300)]
l10n: ru.po: update Russian translation
Signed-off-by: Dimitriy Ryazantcev <dimitriy.ryazantcev@gmail.com>
Junio C Hamano [Fri, 10 Jun 2016 22:30:19 +0000 (15:30 -0700)]
Hopefully the final last-minute update before 2.9 final
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 10 Jun 2016 22:26:06 +0000 (15:26 -0700)]
Merge branch 'jk/diff-compact-heuristic'
It turns out that the earlier effort to update the heuristics may
want to use a bit more time to mature. Turn it off by default.
* jk/diff-compact-heuristic:
diff: disable compaction heuristic for now
Junio C Hamano [Fri, 10 Jun 2016 22:26:04 +0000 (15:26 -0700)]
Merge branch 'jk/shell-portability'
test fixes.
* jk/shell-portability:
t5500 & t7403: lose bash-ism "local"
test-lib: add in-shell "env" replacement
Junio C Hamano [Fri, 10 Jun 2016 22:26:04 +0000 (15:26 -0700)]
Merge branch 'jc/t2300-setup'
A test fix.
* jc/t2300-setup:
t2300: run git-sh-setup in an environment that better mimics the real life
Peter Colberg [Fri, 10 Jun 2016 19:05:26 +0000 (15:05 -0400)]
config.c: fix misspelt "occurred" in an error message
Signed-off-by: Peter Colberg <peter@colberg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Peter Colberg [Fri, 10 Jun 2016 19:05:26 +0000 (15:05 -0400)]
refs.h: fix misspelt "occurred" in a comment
Signed-off-by: Peter Colberg <peter@colberg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 10 Jun 2016 17:58:55 +0000 (10:58 -0700)]
diff: disable compaction heuristic for now
http://lkml.kernel.org/g/
20160610075043.GA13411@sigill.intra.peff.net
reports that a change to add a new "function" with common ending
with the existing one at the end of the file is shown like this:
def foo
do_foo_stuff()
+ common_ending()
+end
+
+def bar
+ do_bar_stuff()
+
common_ending()
end
when the new heuristic is in use. In reality, the change is to add
the blank line before "def bar" and everything below, which is what
the code without the new heuristic shows.
Disable the heuristics by default, and resurrect the documentation
for the option and the configuration variables, while clearly
marking the feature as still experimental.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ralf Thielow [Fri, 10 Jun 2016 16:00:46 +0000 (18:00 +0200)]
l10n: de.po: translate 104 new messages
Translate 104 new messages came from git.pot update in
f517e50
(l10n: git.pot: v2.9.0 round 1 (104 new, 37 removed)).
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
René Scharfe [Thu, 9 Jun 2016 21:54:48 +0000 (23:54 +0200)]
xdiff: fix merging of appended hunk with -W
When -W is given we search the lines between the end of the current
context and the next change for a function line. If there is none then
we merge those two hunks as they must be part of the same function.
If the next change is an appended chunk we abort the search early in
get_func_line(), however, because its line number is out of range. Fix
that by searching from the end of the pre-image in that case instead.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lars Vogel [Thu, 9 Jun 2016 18:19:30 +0000 (20:19 +0200)]
Use "working tree" instead of "working directory" for git status
Working directory can be easily confused with the current directory.
In one of my patches I already updated the usage of working directory
with working tree for the man page but I noticed that git status also
uses this incorrect term.
Signed-off-by: Lars Vogel <Lars.Vogel@vogella.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ray Chen [Sun, 5 Jun 2016 16:06:17 +0000 (00:06 +0800)]
l10n: zh_CN: review for git v2.9.0 l10n round 1
Signed-off-by: Ray Chen <oldsharp@gmail.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Tom Russello [Wed, 8 Jun 2016 17:23:16 +0000 (19:23 +0200)]
doc: change configuration variables format
This change configuration variables that where in italic style
to monospace font according to the guideline. It was obtained with
grep '[[:alpha:]]*\.[[:alpha:]]*::$' config.txt | \
sed -e 's/::$//' -e 's/\./\\\\./' | \
xargs -iP perl -pi -e "s/\'P\'/\`P\`/g" ./*.txt
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tom Russello [Tue, 7 Jun 2016 22:35:07 +0000 (00:35 +0200)]
doc: more consistency in environment variables format
Wrap with backticks (monospaced font) unwrapped or single-quotes wrapped
(italic type) environment variables which are followed by the word
"environment". It was obtained with:
perl -pi -e "s/\'?(\\\$?[0-9A-Z\_]+)\'?(?= environment ?)/\`\1\`/g" *.txt
One of the main purposes is to stick to the CodingGuidelines as possible so
that people writting new documentation by mimicking the existing are more likely
to have it right (even if they didn't read the CodingGuidelines).
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tom Russello [Tue, 7 Jun 2016 22:35:06 +0000 (00:35 +0200)]
doc: change environment variables format
This change GIT_* variables that where in italic style to monospaced font
according to the guideline. It was obtained with
perl -pi -e "s/\'(GIT_.*?)\'/\`\1\`/g" *.txt
One of the main purposes is to stick to the CodingGuidelines as possible so
that people writting new documentation by mimicking the existing are more likely
to have it right (even if they didn't read the CodingGuidelines).
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tom Russello [Tue, 7 Jun 2016 22:35:05 +0000 (00:35 +0200)]
doc: clearer rule about formatting literals
Make the guideline text that we want for our documentation clearer.
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 7 Jun 2016 22:53:00 +0000 (18:53 -0400)]
tree-diff: avoid alloca for large allocations
Commit
72441af (tree-diff: rework diff_tree() to generate
diffs for multiparent cases as well, 2014-04-07) introduced
the use of alloca so that the common cases of commits with 1
or 2 parents would not be adversely affected by going
through the multi-parent code.
However, our xalloca is not ideal when the number of parents
grows very large:
1. If the requested size is too large for our stack,
alloca() has no way to tell us, and we simply segfault
while trying to access the memory.
2. It does not use our usual memory_limit_check() logic.
I measured, and alloca is indeed buying us a very small
speedup over xmalloc()/free(). So we'd want to keep
something like it.
This patch simply puts a conditional in place at each
callsite: we use alloca for common known-small numbers of
parents, and otherwise use the heap. We are technically
still vulnerable to (1), but no more so than if we simply
put a few dozen bytes on the stack, which we must do all the
time anyway. And likewise, we technically miss a memory
limit check if it is tiny, but such a limit is pointless.
An alternative to this would be implement something like:
struct tree *tp, tp_fallback[2];
if (nparent <= ARRAY_SIZE(tp_fallback))
tp = tp_fallback;
else
ALLOC_ARRAY(tp, nparent);
...
if (tp != tp_fallback)
free(tp);
That would let us drop our xalloca() portability code
entirely. But in my measurements, this seemed to perform
slightly worse than the xalloca solution.
Note in the example above, and in the patch below, I've used
ALLOC_ARRAY() to replace the manual xmalloc(nr * sizeof(*x)).
Besides being shorter, this has the bonus that one cannot
accidentally overflow a size_t during that computation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Edward Thomson [Tue, 31 May 2016 22:08:18 +0000 (17:08 -0500)]
add: add --chmod=+x / --chmod=-x options
The executable bit will not be detected (and therefore will not be
set) for paths in a repository with `core.filemode` set to false,
though the users may still wish to add files as executable for
compatibility with other users who _do_ have `core.filemode`
functionality. For example, Windows users adding shell scripts may
wish to add them as executable for compatibility with users on
non-Windows.
Although this can be done with a plumbing command
(`git update-index --add --chmod=+x foo`), teaching the `git-add`
command allows users to set a file executable with a command that
they're already familiar with.
Signed-off-by: Edward Thomson <ethomson@edwardthomson.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ramsay Jones [Tue, 7 Jun 2016 00:35:33 +0000 (01:35 +0100)]
regex: fix a SIZE_MAX macro redefinition warning
Since commit
56a1a3ab ("Silence GCC's \"cast of pointer to integer of a
different size\" warning", 26-10-2015), sparse has been issuing a macro
redefinition warning for the SIZE_MAX macro. However, gcc did not issue
any such warning.
After commit
56a1a3ab, in terms of the order of #includes and #defines,
the code looked something like:
$ cat -n junk.c
1 #include <stddef.h>
2
3 #define SIZE_MAX ((size_t) -1)
4
5 #include <stdint.h>
6
7 int main(int argc, char *argv[])
8 {
9 return 0;
10 }
$
$ gcc junk.c
$
However, if you compile that file with -Wsystem-headers, then it will
also issue a warning. Having set -Wsystem-headers in CFLAGS, using the
config.mak file, then (on cygwin):
$ make compat/regex/regex.o
CC compat/regex/regex.o
In file included from /usr/lib/gcc/x86_64-pc-cygwin/4.9.3/include/stdint.h:9:0,
from compat/regex/regcomp.c:21,
from compat/regex/regex.c:77:
/usr/include/stdint.h:362:0: warning: "SIZE_MAX" redefined
#define SIZE_MAX (__SIZE_MAX__)
^
In file included from compat/regex/regex.c:69:0:
compat/regex/regex_internal.h:108:0: note: this is the location of the previous definition
# define SIZE_MAX ((size_t) -1)
^
$
The compilation of the compat/regex code is somewhat unusual in that the
regex.c file directly #includes the other c files (regcomp.c, regexec.c
and regex_internal.c). Commit
56a1a3ab added an #include of <stdint.h>
to the regcomp.c file, which results in the redefinition, since this is
included after the regex_internal.h header. This header file contains a
'fallback' definition for SIZE_MAX, in order to support systems which do
not have the <stdint.h> header (the HAVE_STDINT_H macro is not defined).
In order to suppress the warning, we move the #include of <stdint.h>
from regcomp.c to the start of the compilation unit, close to the top
of regex.c, prior to the #include of the regex_internal.h header.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Fri, 3 Jun 2016 20:42:35 +0000 (22:42 +0200)]
reflog: continue walking the reflog past root commits
If a repository contains more than one root commit, then its HEAD
reflog may contain multiple "creation events", i.e. entries whose
"from" value is the null sha1. Listing such a reflog currently stops
prematurely at the first such entry, even when the reflog still
contains older entries. This can scare users into thinking that their
reflog got truncated after 'git checkout --orphan'.
Continue walking the reflog past such creation events based on the
preceeding reflog entry's "new" value.
The test 'symbolic-ref writes reflog entry' in t1401-symbolic-ref
implicitly relies on the current behavior of the reflog walker to stop
at a root commit and thus to list only the reflog entries that are
relevant for that test. Adjust the test to explicitly specify the
number of relevant reflog entries to be listed.
Reported-by: Patrik Gustafsson <pvn@textalk.se>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 6 Jun 2016 21:19:45 +0000 (14:19 -0700)]
Git 2.9-rc2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 6 Jun 2016 21:30:49 +0000 (14:30 -0700)]
Sync with 2.8.4
* maint:
Git 2.8.4
Junio C Hamano [Mon, 6 Jun 2016 21:29:32 +0000 (14:29 -0700)]
Git 2.8.4
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 6 Jun 2016 21:27:38 +0000 (14:27 -0700)]
Merge branch 'kb/msys2-tty' into maint
The "are we talking with TTY, doing an interactive session?"
detection has been updated to work better for "Git for Windows".
* kb/msys2-tty:
mingw: make isatty() recognize MSYS2's pseudo terminals (/dev/pty*)
Junio C Hamano [Mon, 6 Jun 2016 21:27:37 +0000 (14:27 -0700)]
Merge branch 'da/difftool' into maint
"git difftool" learned to handle unmerged paths correctly in
dir-diff mode.
* da/difftool:
difftool: handle unmerged files in dir-diff mode
difftool: initialize variables for readability
Junio C Hamano [Mon, 6 Jun 2016 21:27:36 +0000 (14:27 -0700)]
Merge branch 'tb/core-eol-fix' into maint
A couple of bugs around core.autocrlf have been fixed.
* tb/core-eol-fix:
convert.c: ident + core.autocrlf didn't work
t0027: test cases for combined attributes
convert: allow core.autocrlf=input and core.eol=crlf
t0027: make commit_chk_wrnNNO() reliable
Junio C Hamano [Mon, 6 Jun 2016 21:27:35 +0000 (14:27 -0700)]
Merge branch 'ar/diff-args-osx-precompose' into maint
Many commands normalize command line arguments from NFD to NFC
variant of UTF-8 on OSX, but commands in the "diff" family did
not, causing "git diff $path" to complain that no such path is
known to Git. They have been taught to do the normalization.
* ar/diff-args-osx-precompose:
diff: run arguments through precompose_argv
Junio C Hamano [Mon, 6 Jun 2016 21:18:55 +0000 (14:18 -0700)]
Merge branch 'sb/submodule-helper-relative-path'
A bash-ism "local" has been removed from "git submodule" scripted
Porcelain.
* sb/submodule-helper-relative-path:
submodule: remove bashism from shell script
Junio C Hamano [Mon, 6 Jun 2016 21:18:55 +0000 (14:18 -0700)]
Merge branch 'sb/submodule-helper-list-signal-unmatch-via-exit-status'
The way how "submodule--helper list" signals unmatch error to its
callers has been updated.
* sb/submodule-helper-list-signal-unmatch-via-exit-status:
submodule--helper: offer a consistent API
Ville Skyttä [Mon, 6 Jun 2016 16:29:33 +0000 (19:29 +0300)]
git-prompt.sh: Don't error on null ${ZSH,BASH}_VERSION, $short_sha
When the shell is in "nounset" or "set -u" mode, referencing unset or
null variables results in an error. Protect $ZSH_VERSION and
$BASH_VERSION against that, and initialize $short_sha before use.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber [Mon, 6 Jun 2016 13:23:54 +0000 (15:23 +0200)]
cherry-pick: allow to pick to unborn branches
cherry-pick allows to pick single commits to an empty HEAD, but not
multiple commits.
Allow the multiple commit case, too.
Reported-by: Fabrizio Cucci <fabrizio.cucci@gmail.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Sun, 29 May 2016 12:40:35 +0000 (20:40 +0800)]
l10n: zh_CN: for git v2.9.0 l10n round 1
Update 104 new translations (2596t1f0u) for git v2.9.0-rc0.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Junio C Hamano [Fri, 3 Jun 2016 21:38:35 +0000 (14:38 -0700)]
Almost ready for 2.9-rc2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 3 Jun 2016 21:38:04 +0000 (14:38 -0700)]
Merge branch 'rs/apply-name-terminate'
Code clean-up.
* rs/apply-name-terminate:
apply: remove unused parameters from name_terminate()
Junio C Hamano [Fri, 3 Jun 2016 21:38:03 +0000 (14:38 -0700)]
Merge branch 'rs/patch-id-use-skip-prefix'
Code clean-up.
* rs/patch-id-use-skip-prefix:
patch-id: use starts_with() and skip_prefix()
Junio C Hamano [Fri, 3 Jun 2016 21:38:02 +0000 (14:38 -0700)]
Merge branch 'bd/readme.markdown-more'
The mark-up in the top-level README.md file has been updated to
typeset CLI command names differently from the body text.
* bd/readme.markdown-more:
README.md: format CLI commands with code syntax
Junio C Hamano [Fri, 3 Jun 2016 21:38:02 +0000 (14:38 -0700)]
Merge branch 'mm/makefile-developer-can-be-in-config-mak'
"make DEVELOPER=1" worked as expected; setting DEVELOPER=1 in
config.mak didn't.
* mm/makefile-developer-can-be-in-config-mak:
Makefile: add $(DEVELOPER_CFLAGS) variable
Makefile: move 'ifdef DEVELOPER' after config.mak* inclusion
Junio C Hamano [Fri, 3 Jun 2016 21:38:02 +0000 (14:38 -0700)]
Merge branch 'em/man-bold-literal'
The manpage output of our documentation did not render well in
terminal; typeset literals in bold by default to make them stand
out more.
* em/man-bold-literal:
Documentation: bold literals in man
Junio C Hamano [Fri, 3 Jun 2016 21:38:02 +0000 (14:38 -0700)]
Merge branch 'pa/cherry-pick-doc-typo'
"git cherry-pick --help" had three instances of word "behavior",
one of which was spelled "behaviour", which is updated to match the
other two.
* pa/cherry-pick-doc-typo:
git-cherry-pick.txt: correct a small typo
Junio C Hamano [Fri, 3 Jun 2016 21:38:01 +0000 (14:38 -0700)]
Merge branch 'mr/send-email-doc-gmail-2fa'
Typofix.
* mr/send-email-doc-gmail-2fa:
Documentation/git-send-email: fix typo in gmail 2FA section
Junio C Hamano [Fri, 3 Jun 2016 21:38:01 +0000 (14:38 -0700)]
Merge branch 'js/rebase-i-dedup-call-to-rerere'
"git rebase -i", after it fails to auto-resolve the conflict, had
an unnecessary call to "git rerere" from its very early days, which
was spotted recently; the call has been removed.
* js/rebase-i-dedup-call-to-rerere:
rebase -i: remove an unnecessary 'rerere' invocation
Junio C Hamano [Fri, 3 Jun 2016 21:38:00 +0000 (14:38 -0700)]
Merge branch 'js/perf-rebase-i'
The one in 'master' has a brown-paper-bag bug that breaks the perf
test when used inside a usual Git repository with a working tree.
* js/perf-rebase-i:
perf: make the tests work without a worktree
Jeff King [Fri, 3 Jun 2016 07:08:05 +0000 (03:08 -0400)]
rev-list: disable bitmaps when "-n" is used with listing objects
You can ask rev-list to use bitmaps to speed up an --objects
traversal, which should generally give you your answers much
faster.
Likewise, you can ask rev-list to limit such a traversal
with `-n`, in which case we'll show only a limited set of
commits (and only the tree and commit objects directly
reachable from those commits).
But if you do both together, the results are nonsensical. We
end up limiting any fallback traversal we do to _find_ the
bitmaps, but the actual set of objects we output will be
picked arbitrarily from the union of any bitmaps we do find,
and will involve the objects of many more commits.
It's possible that somebody might want this as a "show me
what you can, but limit the amount of work you do" flag.
But as with the prior commit clamping "--count", the results
are basically non-deterministic; you'll get the values from
some commits between `n` and the total number, and you can't
tell which.
And unlike the `--count` case, we can't easily generate the
"real" value from the bitmap values (you can't just walk
back `-n` commits and subtract out the reachable objects
from the boundary commits; the bitmaps for `X` record its
total reachability, so you don't know which objects are
directly from `X` itself, which from `X^`, and so on).
So let's just fallback to the non-bitmap code path in this
case, so we always give a sane answer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 3 Jun 2016 07:07:34 +0000 (03:07 -0400)]
rev-list: "adjust" results of "--count --use-bitmap-index -n"
If you ask rev-list for:
git rev-list --count --use-bitmap-index HEAD
we optimize out the actual traversal and just give you the
number of bits set in the commit bitmap. This is faster,
which is good.
But if you ask to limit the size of the traversal, like:
git rev-list --count --use-bitmap-index -n 100 HEAD
we'll still output the full bitmapped number we found. On
the surface, that might even seem OK. You explicitly asked
to use the bitmap index, and it was cheap to compute the
real answer, so we gave it to you.
But there's something much more complicated going on under
the hood. If we don't have a bitmap directly for HEAD, then
we have to actually traverse backwards, looking for a
bitmapped commit. And _that_ traversal is bounded by our
`-n` count.
This is a good thing, because it bounds the work we have to
do, which is probably what the user wanted by asking for
`-n`. But now it makes the output quite confusing. You might
get many values:
- your `-n` value, if we walked back and never found a
bitmap (or fewer if there weren't that many commits)
- the actual full count, if we found a bitmap root for
every path of our traversal with in the `-n` limit
- any number in between! We might have walked back and
found _some_ bitmaps, but then cut off the traversal
early with some commits not accounted for in the result.
So you cannot even see a value higher than your `-n` and say
"OK, bitmaps kicked in, this must be the real full count".
The only sane thing is for git to just clamp the value to a
maximum of the `-n` value, which means we should output the
exact same results whether bitmaps are in use or not.
The test in t5310 demonstrates this by using `-n 1`.
Without this patch we fail in the full-bitmap case (where we
do not have to traverse at all) but _not_ in the
partial-bitmap case (where we have to walk down to find an
actual bitmap). With this patch, both cases just work.
I didn't implement the crazy in-between case, just because
it's complicated to set up, and is really a subset of the
full-count case, which we do cover.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Wed, 1 Jun 2016 23:37:41 +0000 (01:37 +0200)]
Documentation/git-send-email: fix typo in gmail 2FA section
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 1 Jun 2016 20:30:47 +0000 (13:30 -0700)]
t2300: run git-sh-setup in an environment that better mimics the real life
When we run scripted Porcelains, "git" potty has set up the $PATH by
prepending $GIT_EXEC_PATH, the path given by "git --exec-path=$there
$cmd", etc. already. Because of this, scripted Porcelains can
dot-source shell script library like git-sh-setup with simple dot
without specifying any path.
t2300 however dot-sources git-sh-setup without adjusting $PATH like
the real "git" potty does. This has not been a problem so far, but
once git-sh-setup wants to rely on the $PATH adjustment, just like
any scripted Porcelains already do, it would become one. It cannot
for example dot-source another shell library without specifying the
full path to it by prefixing $(git --exec-path).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 1 Jun 2016 20:56:08 +0000 (13:56 -0700)]
t5500 & t7403: lose bash-ism "local"
In t5500::check_prot_host_port_path(), diagport is not a variable
used elsewhere and the function is not recursively called so this
can simply lose the "local", which may not be supported by shell
(besides, the function liberally clobbers other variables without
making them "local").
t7403::reset_submodule_urls() overrides the "root" variable used
in the test framework for no good reason; its use is not about
temporarily relocating where the test repositories are created.
This assignment can be made not to clobber the variable by moving
them into the subshells it already uses. Its value is always
$TRASH_DIRECTORY, so we could use it instead there, and this
function that is called only once and its two subshells may not be
necessary (instead, the caller can use "git -C $there config" and
set a value that is derived from $TRASH_DIRECTORY), but this is a
minimum fix that is needed to lose "local".
Helped-by: John Keeping <john@keeping.me.uk>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Wed, 1 Jun 2016 00:27:59 +0000 (17:27 -0700)]
submodule: remove bashism from shell script
Junio pointed out `relative_path` was using bashisms via the
local variables. As the longer term goal is to rewrite most of the
submodule code in C, do it now.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Tue, 31 May 2016 23:59:33 +0000 (16:59 -0700)]
submodule--helper: offer a consistent API
In
48308681 (2016-02-29, git submodule update: have a dedicated helper
for cloning), the helper communicated errors back only via exit code,
and dance with printing '#unmatched' in case of error was left to
git-submodule.sh as it uses the output of the helper and pipes it into
shell commands. This change makes the helper consistent by never
printing '#unmatched' in the helper but always handling these piping
issues in the actual shell script.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthieu Moy [Wed, 1 Jun 2016 08:00:08 +0000 (10:00 +0200)]
Makefile: add $(DEVELOPER_CFLAGS) variable
This does not change the behavior, but allows the user to tweak
DEVELOPER_CFLAGS on the command-line or in a config.mak* file if
needed.
This also makes the code somewhat cleaner as it follows the pattern
<initialisation of variables>
<include statements>
<actual build logic>
by specifying which flags to activate in the first part, and actually
activating them in the last one.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 1 Jun 2016 07:04:26 +0000 (03:04 -0400)]
test-lib: add in-shell "env" replacement
The one-shot environment variable syntax:
FOO=BAR some-program
is unportable when some-program is actually a shell
function, like test_must_fail (on some shells FOO remains
set after the function returns, and on others it does not).
We sometimes get around this by using env, like:
test_must_fail env FOO=BAR some-program
But that only works because test_must_fail's arguments are
themselves a command which can be run. You can't run:
env FOO=BAR test_must_fail some-program
because env does not know about our shell functions. So
there is no equivalent for test_commit, for example, and one
must resort to:
(
FOO=BAR
export FOO
test_commit
)
which is a bit verbose. Let's add a version of "env" that
works _inside_ the shell, by creating a subshell, exporting
variables from its argument list, and running the command.
Its use is demonstrated on a currently-unportable case in
t4014.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 31 May 2016 21:07:08 +0000 (14:07 -0700)]
Git 2.9-rc1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 31 May 2016 21:12:08 +0000 (14:12 -0700)]
Merge branch 'maint'
* maint:
More topics for 2.8.4
Junio C Hamano [Tue, 31 May 2016 21:11:38 +0000 (14:11 -0700)]
More topics for 2.8.4
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 31 May 2016 21:09:46 +0000 (14:09 -0700)]
Merge branch 'sb/submodule-deinit-all' into maint
Correct faulty recommendation to use "git submodule deinit ." when
de-initialising all submodules, which would result in a strange
error message in a pathological corner case.
* sb/submodule-deinit-all:
submodule deinit: require '--all' instead of '.' for all submodules
Junio C Hamano [Tue, 31 May 2016 21:08:28 +0000 (14:08 -0700)]
Merge branch 'bn/http-cookiefile-config' into maint
"http.cookieFile" configuration variable clearly wants a pathname,
but we forgot to treat it as such by e.g. applying tilde expansion.
* bn/http-cookiefile-config:
http: expand http.cookieFile as a path
Documentation: config: improve word ordering for http.cookieFile
Junio C Hamano [Tue, 31 May 2016 21:08:27 +0000 (14:08 -0700)]
Merge branch 'jk/test-send-sh-x-trace-elsewhere' into maint
Running tests with '-x' option to trace the individual command
executions is a useful way to debug test scripts, but some tests
that capture the standard error stream and check what the command
said can be broken with the trace output mixed in. When running
our tests under "bash", however, we can redirect the trace output
to another file descriptor to keep the standard error of programs
being tested intact.
* jk/test-send-sh-x-trace-elsewhere:
test-lib: set BASH_XTRACEFD automatically
Junio C Hamano [Tue, 31 May 2016 21:08:26 +0000 (14:08 -0700)]
Merge branch 'js/name-rev-use-oldest-ref' into maint
"git describe --contains" often made a hard-to-justify choice of
tag to give name to a given commit, because it tried to come up
with a name with smallest number of hops from a tag, causing an old
commit whose close descendant that is recently tagged were not
described with respect to an old tag but with a newer tag. It did
not help that its computation of "hop" count was further tweaked to
penalize being on a side branch of a merge. The logic has been
updated to favor using the tag with the oldest tagger date, which
is a lot easier to explain to the end users: "We describe a commit
in terms of the (chronologically) oldest tag that contains the
commit."
* js/name-rev-use-oldest-ref:
name-rev: include taggerdate in considering the best name
Johannes Sixt [Fri, 27 May 2016 16:28:21 +0000 (18:28 +0200)]
rebase -i: remove an unnecessary 'rerere' invocation
Interactive rebase uses 'git cherry-pick' and 'git merge' to replay
commits. Both invoke the 'rerere' machinery when they fail due to merge
conflicts. Note that all code paths with these two commands also invoke
the shell function die_with_patch when the commands fail.
Since commit
629716d2 ("rerere: do use multiple variants") the second
operation of the rerere machinery can be observed by a duplicated
message "Recorded preimage for 'file'". This second operation records
the same preimage as the first one and, hence, only wastes cycles.
Remove the 'git rerere' invocation from die_with_patch.
Shell function die_with_patch can be called after the failure of
"git commit", too, which also calls into the rerere machinery, but it
does so only after a successful commit to record the resolution.
Therefore, it is wrong to call 'git rerere' from die_with_patch after
"git commit" fails.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 29 May 2016 16:43:41 +0000 (18:43 +0200)]
perf: make the tests work without a worktree
In regular repositories $source_git and $objects_dir contain relative
paths based on $source. Go there to allow cp to resolve them.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 28 May 2016 15:06:19 +0000 (17:06 +0200)]
grep: -W: don't extend context to trailing empty lines
Empty lines between functions are shown by grep -W, as it considers them
to be part of the function preceding them. They are not interesting in
most languages. The previous patches stopped showing them for diff -W.
Stop showing empty lines trailing a function with grep -W. Grep scans
the lines of a buffer from top to bottom and prints matching lines
immediately. Thus we need to peek ahead in order to determine if an
empty line is part of a function body and worth showing or not.
Remember how far ahead we peeked in order to avoid having to do so
repeatedly when handling multiple consecutive empty lines.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 28 May 2016 15:05:41 +0000 (17:05 +0200)]
t7810: add test for grep -W and trailing empty context lines
Add a test demonstrating that git grep -W prints empty lines following
the function context we're actually interested in. The modified test
file makes it necessary to adjust three unrelated test cases.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 28 May 2016 15:04:31 +0000 (17:04 +0200)]
xdiff: don't trim common tail with -W
The function trim_common_tail() exits early if context lines are
requested. If -U0 and -W are specified together then it can still trim
context lines that might belong to a changed function. As a result
that function is shown incompletely.
Fix that by calling trim_common_tail() only if no function context or
fixed context is requested. The parameter ctx is no longer needed now;
remove it.
While at it fix an outdated comment as well.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 28 May 2016 15:03:16 +0000 (17:03 +0200)]
xdiff: -W: don't include common trailing empty lines in context
Empty lines between functions are shown by diff -W, as it considers them
to be part of the function preceding them. They are not interesting in
most languages. The previous patch stopped showing them in the special
case of a function added at the end of a file.
Stop extending context to those empty lines by skipping back over them
from the start of the next function.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 28 May 2016 15:02:24 +0000 (17:02 +0200)]
xdiff: ignore empty lines before added functions with -W
If a new function and a preceding empty line is appended, diff -W shows
the previous function in full in order to provide context for that empty
line. In most languages empty lines between sections are not
interesting in and off themselves and showing a whole extra function for
them is not what we want.
Skip empty lines when checking of the appended chunk starts with a
function line, thereby avoiding to extend the context just for them.
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 28 May 2016 15:00:28 +0000 (17:00 +0200)]
xdiff: handle appended chunks better with -W
If lines are added at the end of a file, diff -W shows the whole file.
That's because get_func_line() only considers the pre-image and gives up
if it sees a record index beyond its end.
Consider the post-image as well to see if the added lines already make
up a full function. If it doesn't then search for the previous function
line by starting from the bottom of the pre-image, thereby avoiding to
confuse get_func_line().
Reuse the existing label called "again", as it's exactly where we need
to jump to when we're done handling the pre-context, but rename it to
"post_context_calculation" in order to document its new purpose better.
Reported-by: Junio C Hamano <gitster@pobox.com>
Initial-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>