OSDN Git Service
Dave Airlie [Fri, 6 Nov 2009 03:47:54 +0000 (13:47 +1000)]
Merge branch 'drm-next' of ../drm-2.6 into drm-next
Alex Deucher [Thu, 5 Nov 2009 16:57:07 +0000 (11:57 -0500)]
drm/radeon/kms: initial mode validation support
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 5 Nov 2009 07:21:06 +0000 (02:21 -0500)]
drm/radeon/kms/atom/dce3: call transmitter init on mode set
Generally this is done at post, but might not always be done
with softboot or for connectors on docking stations.
Could probably be done once when the driver loads/resumes
rather than on each mode set.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 5 Nov 2009 18:16:01 +0000 (13:16 -0500)]
drm/radeon/kms: store detailed connector info
This will be useful for mode validation and certain
atom tables.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 5 Nov 2009 06:16:23 +0000 (01:16 -0500)]
drm/radeon/kms/atom/dce3: fix up usPixelClock calculation for Transmitter tables
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 5 Nov 2009 18:11:46 +0000 (13:11 -0500)]
drm/radeon/kms/r600: fix rs880 support v2
Lots of cases were wrong or missing.
v2: rebased against drm-next
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 4 Nov 2009 22:28:54 +0000 (08:28 +1000)]
Merge branch 'drm-next' of ../drm-2.6 into drm-next
Alex Deucher [Tue, 3 Nov 2009 15:04:01 +0000 (10:04 -0500)]
drm/radeon/kms/r700: fix some typos in chip init
Noticed by Andre on IRC.
Also fix up some minor whitespace issues.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 3 Nov 2009 21:10:36 +0000 (16:10 -0500)]
drm/radeon/kms: remove some misleading debugging output
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 3 Nov 2009 04:54:36 +0000 (14:54 +1000)]
drm/radeon/kms: stop putting VRAM at 0 in MC space on r600s.
The Lenovo W500 laptop hangs inside an SMI on brightness changes,
I thought it just needed the VGA disable but it turned out to require
slightly more work, setting the MC locations up just like the IGP
chip requirements seems to make it all happy again and I can boot
and play with brightness.
We should probably just do this for all chips and give up the VRAM
at 0x0 idea, it never seems to buy us anything but pain.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 3 Nov 2009 03:23:15 +0000 (13:23 +1000)]
drm/radeon/kms: disable D1VGA and D2VGA if enabled
Once kms is enabled we don't need these, and it causes a problem
with the Lenovo W500 ACPI brightness implementation, it hangs
in a loop inside an SMI.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Mon, 2 Nov 2009 21:01:27 +0000 (16:01 -0500)]
drm/radeon/kms: Don't RMW CP_RB_CNTL
Immediate readback seems faulty on some chips. I
suspect it takes a while to get through the fifo
to the actual register backbone. There's no need
to read it back, so, just write the driver's copy
of the register's value directly.
Should fix bug 24535 and possibly 24218
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 30 Oct 2009 03:31:26 +0000 (13:31 +1000)]
drm/radeon/kms: fix coherency issues on AGP cards.
When we are evicting from VRAM->RAM we allocate the ttm object,
but we don't set the caching policy on it before blitting into it.
This means on AGP we end up blitting into cached pages, and
the CPU later flushes out on top of them. This was mostly seen as
font corruption.
The other question is why we don't evict VRAM->GTT in a lot of cases,
this would save us some cache transitions since a lot of objects
that are evicted from VRAM will probably end up being pulled back in
a few operations later, and evicting them to system memory involves
2 unnecessary cache transitions.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 28 Oct 2009 06:08:41 +0000 (16:08 +1000)]
Merge branch 'drm-next' of ../drm-2.6 into drm-next
Dave Airlie [Tue, 27 Oct 2009 00:57:53 +0000 (11:57 +1100)]
drm/radeon/kms: fix rc410 suspend/resume.
This fixes suspend/resume on my rc410 motherboard, it restores
the memory controller setup before posting the GPU, since it seems
to need the MC_FB_LOCATION setup correctly.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 28 Oct 2009 05:46:54 +0000 (01:46 -0400)]
drm/radeon/kms: add quirk for hp dc5750
Doesn't have a tv-out port
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 28 Oct 2009 04:51:20 +0000 (00:51 -0400)]
drm/radeon/kms/atom: fix potential oops in spread spectrum code
Make sure we have an LVDS encoder before casting enc_priv.
[airlied: also fix two missing cpu_to_le16 casts we noticed on irc]
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
James Simmons [Tue, 27 Oct 2009 21:09:24 +0000 (21:09 +0000)]
drm/kms: typo fix
I believe this is a typo.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mathias Fröhlich [Tue, 27 Oct 2009 19:08:01 +0000 (15:08 -0400)]
drm/radeon/kms/atom: Make card_info per device
Make the struct card_info, which is a per struct radeon_device dataset, a
struct member of the radeon device instead of a static per kernel module
value. This should avoid potential problems with two radeon cards installed in
one system.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 27 Oct 2009 16:11:09 +0000 (12:11 -0400)]
drm/radeon/kms/atom: Fix DVO support
DVO in 12 bit mode (which seems to be the most common
config) requires 2x ppll.
Fixes fdo bug 21857.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 27 Oct 2009 15:16:09 +0000 (11:16 -0400)]
drm/radeon/kms/atom: loosen pll min output limits
Limiting the pll output range is a good thing generally as
it limits the number of possible pll combinations for a given
frequency presumably to the ones that work best on each card.
That's why the limits are in the bios tables. However, certain
duallink DVI monitors seem to like pll combinations that would
be limited by this at least on pre-DCE 3.0 r6xx hardware. This
might need to be adjusted per family or per clock range in the
future.
See fdo bug 24727.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Kristian Høgsberg [Fri, 11 Sep 2009 18:33:34 +0000 (04:33 +1000)]
drm: Add async event synchronization for drmWaitVblank
This patch adds a new flag to the drmWaitVblank ioctl, which asks the drm
to return immediately and notify userspace when the specified vblank sequence
happens by sending an event back on the drm fd.
The event mechanism works with the other flags supported by the ioctls,
specifically, the vblank sequence can be specified relatively or absolutely,
and works for primary and seconday crtc.
The signal field of the vblank request is used to provide user data,
which will be sent back to user space in the vblank event.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Robert Noland [Tue, 20 Oct 2009 12:23:07 +0000 (07:23 -0500)]
drm/radeon: A bit of cleanup work on radeon_freelist_get()
Fix the main loop to search all buffers before sleeping.
Remove dead code
Signed-off-by: Robert Noland <rnoland@2hip.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 16 Oct 2009 16:21:24 +0000 (12:21 -0400)]
drm/radeon/kms: add support for msi
Try to enable msi on chips that support it.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 16 Oct 2009 15:15:25 +0000 (11:15 -0400)]
drm/radeon/kms/atom: add support for spread spectrum (v2)
Spread spectrum is a periodic disturbance added
to the feedback divider to change the pixel clock
periodically to reduce interference.
Only enabled on LVDS.
v2: add support for r4xx and fix DCE 3
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 22 Oct 2009 20:12:34 +0000 (16:12 -0400)]
drm/radeon/kms/r7xx: add regs for 40 bit CUR/GRPH addresses
The *_HIGH regs are reversed. The secondary ones are in the
primary block and vice versa.
We currently only use a 32 bit internal address, so these are
0 for now.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Robert Noland [Tue, 20 Oct 2009 18:07:38 +0000 (13:07 -0500)]
drm/radeon/r600: only assign vb after we know space is available.
This patch only changes this is the swap path, where it doesn't loop.
Signed-off-by: Robert Noland <rnoland@2hip.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Robert Noland [Tue, 20 Oct 2009 13:11:36 +0000 (08:11 -0500)]
drm/radeon/r600: Replace repeated calculations with variable.
- Reduce the chance of error and avoid a bit of overhead.
- Use switch to assign color and format
Signed-off-by: Robert Noland <rnoland@2hip.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mathias Fröhlich [Mon, 19 Oct 2009 21:49:49 +0000 (17:49 -0400)]
drm/radeon/kms/atom: get better min pixel clock info
Where supported use ulMinPixelClockPLL_Output rather than
usMinPixelClockPLL_Output for pll_out_min. This seems to
improve pll selection on some boards.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 16 Oct 2009 03:26:09 +0000 (23:26 -0400)]
drm/radeon/kms: add quirk for acer 5102
doesn't have a tv-out port
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Mon, 19 Oct 2009 21:23:33 +0000 (17:23 -0400)]
drm/radeon/kms: fix vram_width calculation on r6xx/r7xx
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mathias Fröhlich [Mon, 19 Oct 2009 16:50:41 +0000 (12:50 -0400)]
drm/radeon/kms: fix cs parser tex bit 11 check
The problem boils down to the order when the bit11
of the texture size is or'ed to the original width.
In the end each mipmap level has the same width or
height because of that 11 bit is ored to the scaled
down lod with and thus blows up the size again to the
full size or more due to the power of two rounding
afterwards.
The attached patch changes this order so that the
texture sizes are computed correct. Also the on error
the yet missing inputs to the size computation are
printed which helped me to find out where it really breaks.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 23 Oct 2009 08:49:03 +0000 (18:49 +1000)]
drm/kms: fix kms/fbdev colormap support properly.
This sets the fbcon to use TRUECOLOR by default, it then
only modifies the pseudo palette for fbcon, and only touches
the real palette when in 8-bit pseudo color mode.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 16 Oct 2009 03:38:32 +0000 (23:38 -0400)]
drm/radeon/kms: fix support for original r100
Original radeon didn't have a connector table in the
bios. Check for the CRT table and if we have one,
add a VGA connector.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
Alex Deucher [Fri, 16 Oct 2009 03:08:05 +0000 (23:08 -0400)]
drm/radeon/kms: fix legacy quirk handling
Need to check the return type for the quirk function
to decide whether we add the connectors and encoders.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
Zhao Yakui [Wed, 14 Oct 2009 01:11:25 +0000 (09:11 +0800)]
drm: Add the basic check for the detailed timing in EDID
Sometimes we will get the incorrect display modeline when parsing the detailed
timing in EDID. For example:
>hsync/vsync width is zero
>sync is beyond the blank.
So add the basic check for the detailed timing in EDID to avoid the incorrect
display modeline.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Matt Turner [Wed, 14 Oct 2009 04:34:41 +0000 (00:34 -0400)]
drm/radeon/kms: use RADEON_GPU_PAGE_SIZE instead of 4096
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 13 Oct 2009 16:48:44 +0000 (12:48 -0400)]
drm/radeon/kms: limit default tv modes to <= 1024x768
fixes fdo bug 24496
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 14 Oct 2009 03:57:47 +0000 (23:57 -0400)]
drm/radeon/kms/atom: fix tv-out
D1MODE_INTERLEAVE_EN was getting set in some cases
in the encoder quirks function due to the changes in
5a9bcacc0a56f0d9577494e834519480018a6cc3
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 15 Oct 2009 20:16:35 +0000 (16:16 -0400)]
drm/radeon/kms: fix connector edid handling
Based partly on a patch from
Christian Koenig <deathsimple@vodafone.de>
- fix several memory leaks in radeon_connector->edid handling
- store edid in radeon_connector->edid in detect() or get_modes()
- switch hdmi detect code to use radeon_connector->edid
- add support for oem boards multiple connectors that share
a ddc line.
- short circuit lvds_detect() if have a stored edid
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 15 Oct 2009 05:33:35 +0000 (01:33 -0400)]
drm/radeon/kms: fix internal tmds setup on legacy display engine
- crtc 0 routing was wrong
- need to clear various timing bits in FP_GEN_CNTL
- need to set FP_H/V2_SYNC_STRT_WID regs for crtc 1
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 14 Oct 2009 06:00:42 +0000 (02:00 -0400)]
drm/radeon/kms: move active_device setup into encoder fixup()
radeon_encoder->active_device defines the active routing
between the encoder and connector. The encoder fixup and
dpms functions need to know the active_device to function
properly. Setting active_device in the prepare hook was
too late in some cases.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Mon, 12 Oct 2009 15:25:05 +0000 (11:25 -0400)]
drm/radeon/kms: properly handle mode id with native mode changes
drm modes are objects with indentifiers. Make sure to preserve
the mode id when copying mode params.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 12 Oct 2009 04:21:19 +0000 (14:21 +1000)]
drm/radeon/kms: fix use of index before proper initialisation.
With the adjust table introduction, we need to fill out index
before getting the table version.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 12 Oct 2009 03:54:10 +0000 (13:54 +1000)]
drm/radeon: Revert "drm/r600: avoid assigning vb twice in blit code"
This reverts commit
49c458e544ae14514209ed80ea6829ca1b18ddf0. It
seems to have some side effects in the non-kms cases.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 9 Oct 2009 22:41:19 +0000 (18:41 -0400)]
drm/radeon/kms: also check for edid in lvds detect
In case the system has bad native mode info but
valid edid.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 9 Oct 2009 19:14:30 +0000 (15:14 -0400)]
drm/radeon/kms: use drm_mode directly for panel modes
This reduces the number of mode format conversions needed
and makes native panel mode support cleaner.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 8 Oct 2009 19:09:31 +0000 (15:09 -0400)]
drm/radeon/kms/atom: rework crtc modeset
- clean up tv timing handling
- unify SetCRTC_Timing and SetCRTC_UsingDTDTiming
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 8 Oct 2009 17:36:21 +0000 (13:36 -0400)]
drm/radeon/kms/atom: add support for AdjustDisplayPll
DCE3+ has an AdjustDisplayPll that will adjust the pixel
clock accordingly based on the encoder/transmitter to
handle special hw requirements.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 8 Oct 2009 17:08:29 +0000 (13:08 -0400)]
drm/radeon/kms/atom: reorder crtc dpms
Based on recommendation from bios docs.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 8 Oct 2009 17:02:19 +0000 (13:02 -0400)]
drm/radeon/kms: make sure LVDS panel is valid in detect()
If the panel data is bogus this can lead to problems
later when the hardware trys to set the mode. If the
data is invalid, report LVDS as disconnected.
Should fix fdo bug 24247.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Michel Dänzer [Thu, 8 Oct 2009 08:44:10 +0000 (10:44 +0200)]
drm/radeon/kms: Fix apparent typo in legacy CRTC memory bandwidth calculation.
While investigating the cause of CRTC FIFO underruns, I noticed that when
converting the memory bandwidth calculation from the userspace X driver code,
an instance of '8.0' was apparently accidentally converted to '80'.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Michel Dänzer [Thu, 8 Oct 2009 08:44:09 +0000 (10:44 +0200)]
drm/radeon/kms: Update memory bandwidth requirements in mode_set_base hook.
The hook may change the number of bytes per pixel being scanned out, which
affects the CRTC memory bandwidth requirements. E.g. booting in 8bpp and then
running X in 32bpp would result in the bandwidth requirements being
underestimated for the latter and consequently in CRTC FIFO underruns causing
visible artifacts with 3D intensive workloads.
ATOM changes only compile-tested.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 12 Oct 2009 03:32:38 +0000 (13:32 +1000)]
drm/radeon/kms: don't refuse LUT because no framebuffer.
The fb binding might be happening in a subsequent crtc setup call.
gets rid of some lut issues.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 8 Oct 2009 01:32:49 +0000 (11:32 +1000)]
drm/radeon/kms: fix vline register for second head.
Both r100/r600 had this wrong, use the macro to extract the register
to relocate.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Robert Noland [Mon, 5 Oct 2009 15:56:44 +0000 (11:56 -0400)]
drm/r600: avoid assigning vb twice in blit code
There is no need to assign vb before you know that space is available.
[agd5f: adapted for kernel tree.]
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 7 Oct 2009 23:28:19 +0000 (09:28 +1000)]
drm/radeon: use list_for_each_entry instead of list_for_each
This is just a cleanup of the list macro usage.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Tue, 6 Oct 2009 17:04:30 +0000 (19:04 +0200)]
drm/radeon/kms: Fix AGP support for R600/RV770 family (v2)
For AGP to work unmapped access must cover VRAM & AGP as
AGP is treated like VRAM by the GPU (ie physical address).
This patch properly setup the virtual memory system aperture
to cover AGP if AGP is enabled. It seems that there is memory
corruption after resume when using AGP (RV770 seems unaffected
thought). Version 2 just fix merge issue with updated AGP
fallback patch.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Tue, 6 Oct 2009 17:04:29 +0000 (19:04 +0200)]
drm/radeon/kms: Fallback to non AGP when acceleration fails to initialize (v2)
When GPU acceleration is not working with AGP try to fallback to non
AGP GART (either PCI or PCIE GART). This should make KMS failure on
AGP less painfull. We still need to find out what is wrong when AGP
fails but at least user have a lot of more chances to get a working
configuration with acceleration. This patch also cleanup R600/RV770
fallback path so they use same code as others asics. Version 2
factorize agp disabling logic to avoid code duplication and bugs.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Wed, 7 Oct 2009 09:08:22 +0000 (11:08 +0200)]
drm/radeon/kms: Fix RS600/RV515/R520/RS690 IRQ
Bad generated header file leaded to use wrong register
to check IRQ status and acknowledge them. Fix the header
and use proper registers.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Roel Kluin [Tue, 6 Oct 2009 19:48:40 +0000 (21:48 +0200)]
drm/radeon: Fix setting of bits
Duplicate bits set
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 29 Sep 2009 03:56:38 +0000 (13:56 +1000)]
drm/ttm: fix refcounting in ttm global code.
the global refcount wasn't being increased after the first reference.
this caused an oops on unload on a multi-gpu card.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 6 Oct 2009 03:54:01 +0000 (13:54 +1000)]
drm/fb: add more correct 8/16/24/32 bpp fb support.
The previous patches had some unwanted side effects, I've fixed
the lack of 32bpp working, and fixed up 16bpp so it should also work.
this also adds the interface to allow the driver to set a preferred
console depth so for example low memory rn50 can set it to 8bpp.
It also catches 24bpp on cards that can't do it and forces 32bpp.
Tested on r100/r600/i945.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Sun, 4 Oct 2009 23:58:02 +0000 (09:58 +1000)]
drm/fb: add setcmap and fix 8-bit support.
This adds support for the setcmap api and fixes the 8bpp
support at least on radeon hardware. It adds a new load_lut
hook which can be called once the color map is setup.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 1 Oct 2009 23:19:09 +0000 (09:19 +1000)]
drm/radeon/kms: respect single crtc cards, only create one crtc. (v2)
Also add single crtc for RN50 chips.
changes in v2:
fix vblank init to respect single crtc flag
fix r100 mode bandwidth to respect single crtc flag
Signed-off-by: Dave Airlie <airlied@redhat.com>
Zhao Yakui [Wed, 30 Sep 2009 07:21:43 +0000 (15:21 +0800)]
drm: Delete the DRM_DEBUG_KMS in drm_mode_cursor_ioctl
We can get the corresponding info by adding the boot option of "drm.debug=
0x07". But On some boxes it will print the following message many times in
course of moving mouse. In such case the useful DRM debug info will be flushed.
>[drm:drm_mode_cursor_ioctl],
Avoid using the DRM_DEBUG_KMS in drm_mode_cursor_ioctl.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 2 Oct 2009 21:36:41 +0000 (17:36 -0400)]
drm/radeon/kms: add support for "Surround View"
"Surround View" is an option in the system bios that
enables the AMD IGP chip in conjunction with a
discrete AMD card. However, since the IGP vbios is
part of the system bios it is not accessible via the
rom bar or the legacy vga location. When "Surround View"
is enabled in the system bios, the system bios puts a
copy of the IGP vbios image at the start of vram.
This patch adds support for reading the vbios image out
of vram on IGP cards.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Wed, 30 Sep 2009 20:18:43 +0000 (22:18 +0200)]
drm/radeon/kms: Fix irq handling on AVIVO hw
Avivo hw have vblank interrupt in different place, fixes
irq handling (especialy irq disabling while suspending or
shuting down the module).
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Thu, 1 Oct 2009 16:02:15 +0000 (18:02 +0200)]
drm/radeon/kms: R600/RV770 remove dead code and print message for wrong BIOS
R600 & RV770 family are all using atombios so remove dead code and
print an error message if we fail to find a valid atombios.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Thu, 1 Oct 2009 16:02:14 +0000 (18:02 +0200)]
drm/radeon/kms: Fix R600/RV770 disable acceleration path
When acceleration doesn't work we should free associated memory
and stop GPU block responsible for hardware acceleration so we
don't waste resource or let think one component of the driver that
a GPU feature is working/running while it doesn't actualy work.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Thu, 1 Oct 2009 16:02:13 +0000 (18:02 +0200)]
drm/radeon/kms: Fix R600/RV770 startup path & reset
We were calling reset unconditionaly in the startup path
this is bad we need to call GPU reset for a good reason
as after reset the GPU is in unknown states. To avoid any
more bad things to happen we now also unconditionaly
reinitialize the GPU after reset. This patch fix few issues
reported by different people regarding KMS & R6XX/RV7XX hw.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Thu, 1 Oct 2009 16:02:12 +0000 (18:02 +0200)]
drm/radeon/kms: Fix R600 write back buffer
This split write back buffer handling into 3 functions,
wb_fini for cleanup, wb_enable/wb_disable for enabling/disabling
write back used for suspend/resume. This should fix
potential issue of letting the write back active before
suspending. We need to allocate memory in wb_enable because
we can only allocate once GART is running.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Thu, 1 Oct 2009 16:02:11 +0000 (18:02 +0200)]
drm/radeon/kms: Remove old init path as no hw use it anymore
This remove old init path and allow code cleanup, now all hw
use the new init path, see top of radeon.h for description of
this.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Wed, 30 Sep 2009 20:09:06 +0000 (22:09 +0200)]
drm/radeon/kms: Convert RS600 to new init path
New init path allow to simply asic initialization and make easier
to trace what happen on each different asic. We are removing most
callback. Do a massive RS600 register cleanup to clarify RS600
register, we are still bit fuzy on some register and waiting for
more informations. I don't have hw to test, so this patch is a
best effort to not break anythings and to try to improve things.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Thu, 1 Oct 2009 07:39:24 +0000 (09:39 +0200)]
drm/radeon/kms: Convert RS690/RS740 to new init path (V2).
Also cleanup register specific to RS690/RS740. Version 2 add
missing header file for register, remove unecessary call to AGP
function and fix an indentation bug.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Thu, 1 Oct 2009 08:12:06 +0000 (10:12 +0200)]
drm/radeon/kms: Convert R100 to new init path (V2)
New init path allow to simply asic initialization and make easier
to trace what happen on each different asic. We are removing most
callback. More cleanup should happen latter to remove even more
callback. Also cleanup register specific to R100,RV200,RV250.
Version 2 correct the placement on IGP of the VRAM inside GPU address
space to match the stollen RAM placement of IGP.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Wed, 30 Sep 2009 13:35:32 +0000 (15:35 +0200)]
drm/radeon/kms: Convert R300 to new init path
Also cleanup register specific to R300.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Thu, 1 Oct 2009 08:20:52 +0000 (10:20 +0200)]
drm/radeon/kms: Convert RS400/RS480 to new init path & fix legacy VGA (V3)
Also cleanup register specific to RS400/RS480. This patch also fix
legacy VGA register used to disable VGA access we were programming
wrong register. Now we should properly disable VGA on r100 up to
rs400 asics. Note that RS400/RS480 resume is broken, it hangs the
computer while reprogramming dynamic clock, doesn't work either
without that patch. We need to spend more time investigating this
issue. Version 2 of the patch remove dead code that was left
commented out in the previous version. Version 3 correct the
placement on IGP of the VRAM inside GPU address space to match the
stollen RAM placement of IGP.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Mon, 28 Sep 2009 18:39:19 +0000 (20:39 +0200)]
drm/radeon/kms: Convert R520 to new init path and associated cleanup
Convert the r520 asic support to new init path, change are smaller than
previous one as most of the architecture is now in place and more code
sharing can happen btw various asics.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
Jerome Glisse [Mon, 28 Sep 2009 16:34:43 +0000 (18:34 +0200)]
drm/radeon/kms: Convert RV515 to new init path and associated cleanup
Convert the rv515 asic support to new init path also add an explanation
in radeon.h about the new init path. There is also few cleanups
associated with this change (others asic calling rv515 helper
functions).
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
Mikael Pettersson [Mon, 28 Sep 2009 16:27:23 +0000 (18:27 +0200)]
drm: fix radeon DRM warnings when !CONFIG_DEBUG_FS
Compiling the radeon DRM driver with !CONFIG_DEBUG_FS
throws the following warnings:
drivers/gpu/drm/radeon/radeon_ttm.c: In function 'radeon_ttm_debugfs_init':
drivers/gpu/drm/radeon/radeon_ttm.c:714: warning: unused variable 'i'
drivers/gpu/drm/radeon/radeon_ttm.c: At top level:
drivers/gpu/drm/radeon/radeon_ttm.c:692: warning: 'radeon_mem_types_list' defined but not used
drivers/gpu/drm/radeon/radeon_ttm.c:693: warning: 'radeon_mem_types_names' defined but not used
Fix: move these variables inside the #if defined(CONFIG_DEBUG_FS)
block in radeon_ttm_debugsfs_init(), which is the only place using them.
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Dave Airlie <airlied@linux.ie>
Mikael Pettersson [Mon, 28 Sep 2009 16:26:25 +0000 (18:26 +0200)]
drm: fix drm_fb_helper warning when !CONFIG_MAGIC_SYSRQ
Compiling DRM throws the following warning if MAGIC_SYSRQ is disabled:
drivers/gpu/drm/drm_fb_helper.c:101: warning: 'sysrq_drm_fb_helper_restore_op' defined but not used
Fix: place sysrq_drm_fb_helper_restore_op and associated
definitions inside #ifdef CONFIG_MAGIC_SYSRQ.
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Dave Airlie <airlied@linux.ie>
Dave Airlie [Mon, 28 Sep 2009 05:37:25 +0000 (15:37 +1000)]
drm/r600: fix memory leak introduced with 64k malloc avoidance fix.
The legacy r600 path shares code, but doesn't share quite enough
to get the freeing correct. Free the pages here also.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 28 Sep 2009 05:31:10 +0000 (15:31 +1000)]
drm/kms: make fb helper work for all drivers.
This initialises the fb helper with the connector helper,
so that the fb cmdline code works for intel as well.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 25 Sep 2009 22:33:08 +0000 (18:33 -0400)]
drm/radeon/r600: fix offset handling in CS parser
Need add reloc offset to the offset in the actual
packet. Fixes use of the DRAW_INDEX packet by the 3D
driver.
[airlied: modified first one where idx_value == ib[idx+0]
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
Alex Deucher [Fri, 25 Sep 2009 21:32:14 +0000 (17:32 -0400)]
drm/radeon/kms/r600: fix forcing pci mode on agp cards
All we need to do on r6xx/r7xx is clear the RADEON_IS_AGP
flag; the rest is handled in r600.c
fixes fdo bug 23990:
http://bugs.freedesktop.org/show_bug.cgi?id=23990
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
Dave Airlie [Fri, 25 Sep 2009 23:03:39 +0000 (09:03 +1000)]
drm/radeon/kms: fix for the extra pages copying.
Thanks to Michel for pointing this out to me, this is
why I need to get more sleep, over complicate this a bit.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 25 Sep 2009 20:35:11 +0000 (16:35 -0400)]
drm/radeon/kms/r600: add support for vline relocs
Provides support for anti-tearing functionality
in the ddx.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
Alex Deucher [Fri, 25 Sep 2009 20:39:24 +0000 (16:39 -0400)]
drm/radeon/kms: fix some bugs in vline reloc
- fix offset of NOP packet for parsing
- fix p->idx increments
- fix bad mask when updating crtc vline info
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
Alex Deucher [Fri, 25 Sep 2009 14:06:39 +0000 (10:06 -0400)]
drm/radeon/kms/r600: clamp vram to aperture size
r6xx and r7xx was missing this. We don't support
non-CPU accessible vram yet.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
Dave Airlie [Fri, 25 Sep 2009 20:39:00 +0000 (06:39 +1000)]
drm/kms: protect against fb helper not being created.
If drivers don't init the fb helper on the connector, the cmdline
code won't work, but it shouldn't crash either.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 25 Sep 2009 04:23:47 +0000 (14:23 +1000)]
drm/r600: get values from the passed in IB not the copy.
this avoids reading back the IB on AGP, also it avoids
the race where since we haven't fetched the page from the main IB
and written it to the gpu one, reading back fetches 0.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Amerigo Wang [Wed, 23 Sep 2009 08:24:05 +0000 (04:24 -0400)]
drm: create gitignore file for radeon
Got lots of untracked files after compiling.
These files are generated, thus should be ignored by git.
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 23 Sep 2009 05:49:20 +0000 (15:49 +1000)]
drm/radeon/kms: remove unneeded master create/destroy functions.
We shouldn't need these at all in radeon kms mode.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 23 Sep 2009 04:44:08 +0000 (14:44 +1000)]
drm/kms: start adding command line interface using fb.
[note this requires an fb patch posted to linux-fbdev-devel already]
This uses the normal video= command line option to control the kms
output setup at boot time. It is used to override the autodetection
done by kms.
video= normally takes a framebuffer as the first parameter, in kms
it will take a connector name, DVI-I-1, or LVDS-1 etc. If no output
connector is specified the mode string will apply to all connectors.
The mode specification used will match down the probed modes, and if
no mode is found it will add a CVT mode that matches.
video=1024x768 - all connectors match a 1024x768 mode or add a CVT on
video=VGA-1:1024x768, VGA-1 connector gets mode only.
The same strings as used in current fb modedb.c are used, except I've
added three more letters, e, D, d, e = enable, D = enable Digital,
d = disable, which allow a connector to be forced into a certain state.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 16 Sep 2009 10:45:09 +0000 (20:45 +1000)]
fb: change rules for global rules match.
Having a : should be enough 'fb:' isn't really useful
if the fb wants to a kms output ID.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 23 Sep 2009 06:56:27 +0000 (16:56 +1000)]
drm/radeon/kms: don't require up to 64k allocations. (v2)
This avoids needing to do a kmalloc > PAGE_SIZE for the main
indirect buffer chunk, it adds an accessor for all reads from
the chunk and caches a single page at a time for subsequent
reads.
changes since v1:
Use a two page pool which should be the most common case
a single packet spanning > PAGE_SIZE will be hit, but I'm
having trouble seeing anywhere we currently generate anything like that.
hopefully proper short page copying at end
added parser_error flag to set deep errors instead of having to test
every ib value fetch.
fixed bug in patch that went to list.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 25 Sep 2009 01:56:50 +0000 (11:56 +1000)]
drm/radeon/kms: enable dac load detection by default.
when I added the property I forgot to enable it.
Thanks to soreau on #radeon for tracking it down.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 24 Sep 2009 22:56:12 +0000 (08:56 +1000)]
drm/radeon/kms: enable r600 tv outputs.
I never changed this back when I wrote tv-out support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Adam Jackson [Wed, 23 Sep 2009 21:31:21 +0000 (17:31 -0400)]
drm/edid: Fix standard timing parse for EDID <= 1.2
Aspect ratio code of 0 means 1:1 before EDID 1.3.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>