OSDN Git Service
Philippe Mathieu-Daudé [Sat, 13 Oct 2018 00:40:31 +0000 (02:40 +0200)]
tests/vm: Let kvm_available() work in cross environments
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20181013004034.6968-7-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Philippe Mathieu-Daudé [Sat, 13 Oct 2018 00:40:30 +0000 (02:40 +0200)]
tests/vm: Add a BaseVM::arch property
The 'arch' property gives a hint on which architecture the guest image runs.
This can be use to select the correct QEMU binary path.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20181013004034.6968-6-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Philippe Mathieu-Daudé [Sat, 13 Oct 2018 00:40:29 +0000 (02:40 +0200)]
tests/vm: Display remaining seconds to wait for a VM to start
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20181013004034.6968-5-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Philippe Mathieu-Daudé [Sat, 13 Oct 2018 00:40:28 +0000 (02:40 +0200)]
tests/vm: Do not use the -smp option with a single cpu
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20181013004034.6968-4-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Philippe Mathieu-Daudé [Sat, 13 Oct 2018 00:40:27 +0000 (02:40 +0200)]
tests/vm: Do not abuse parallelism when KVM is not available
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20181013004034.6968-3-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Philippe Mathieu-Daudé [Sat, 13 Oct 2018 00:40:26 +0000 (02:40 +0200)]
tests/vm: Extract the kvm_available() handy function
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20181013004034.6968-2-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Paolo Bonzini [Thu, 18 Oct 2018 18:10:03 +0000 (20:10 +0200)]
tests: docker: update test-mingw for GTK+ 2.0 removal
--with-gtkabi does not exist anymore; remove it from the configure invocation.
Fixes:
89d85cde75143325205e332dd97bf1bb8402d7c1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
1539886203-33670-1-git-send-email-pbonzini@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Peter Maydell [Thu, 25 Oct 2018 16:41:03 +0000 (17:41 +0100)]
Merge remote-tracking branch 'remotes/riscv/tags/riscv-for-master-3.1-sf0' into staging
First RISC-V Patch Set for the 3.1 Soft Freeze
This pull request contains a handful of patches that have been floating
around various trees for a while but haven't made it upstream. These
patches all appear quite safe. They're all somewhat independent from
each other:
* One refactors our IRQ management function to allow multiple interrupts
to be raised an once. This patch has no functional difference.
* Cleaning up the op_helper/cpu_helper split. This patch has no
functional difference.
* Updates to various constants to keep them in sync with the latest ISA
specification and to remove some non-standard bits that snuck in.
* A fix for a memory leak in the PLIC driver.
* A fix to our device tree handling to avoid provinging a NULL string.
I've given this my standard test: building the port, booting a Fedora
root filesytem on the latest Linux tag, and then shutting down that
image. Essentially I'm just following the QEMU RISC-V wiki page's
instructions. Everything looks fine here.
We have a lot more outstanding patches so I'll definately be submitting
another PR for the soft freeze.
# gpg: Signature made Wed 17 Oct 2018 21:17:52 BST
# gpg: using RSA key
EF4CA1502CCBAB41
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>"
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/riscv/tags/riscv-for-master-3.1-sf0:
RISC-V: Don't add NULL bootargs to device-tree
RISC-V: Add missing free for plic_hart_config
RISC-V: Update CSR and interrupt definitions
RISC-V: Move non-ops from op_helper to cpu_helper
RISC-V: Allow setting and clearing multiple irqs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 24 Oct 2018 21:08:42 +0000 (22:08 +0100)]
Merge remote-tracking branch 'remotes/berrange/tags/qcrypto-next-pull-request' into staging
Improve performance of XTS cipher mode impl
The XTS cipher mode performance is approximately doubled and test
coverage is improved.
# gpg: Signature made Wed 24 Oct 2018 19:05:08 BST
# gpg: using RSA key
BE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/qcrypto-next-pull-request:
crypto: add testing for unaligned buffers with XTS cipher mode
crypto: refactor XTS cipher mode test suite
crypto: annotate xts_tweak_encdec as inlineable
crypto: convert xts_mult_x to use xts_uint128 type
crypto: convert xts_tweak_encdec to use xts_uint128 type
crypto: introduce a xts_uint128 data type
crypto: remove code duplication in tweak encrypt/decrypt
crypto: expand algorithm coverage for cipher benchmark
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Daniel P. Berrangé [Tue, 16 Oct 2018 09:17:12 +0000 (10:17 +0100)]
crypto: add testing for unaligned buffers with XTS cipher mode
Validate that the XTS cipher mode will correctly operate with plain
text, cipher text and IV buffers that are not 64-bit aligned.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Daniel P. Berrangé [Mon, 15 Oct 2018 17:03:41 +0000 (18:03 +0100)]
crypto: refactor XTS cipher mode test suite
The current XTS test overloads two different tests in a single function
making the code a little hard to follow. Split it into distinct test
cases.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Daniel P. Berrangé [Tue, 9 Oct 2018 09:50:43 +0000 (10:50 +0100)]
crypto: annotate xts_tweak_encdec as inlineable
Encouraging the compiler to inline xts_tweak_encdec increases the
performance for xts-aes-128 when built with gcrypt:
Encrypt: 545 MB/s -> 580 MB/s
Decrypt: 568 MB/s -> 602 MB/s
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Daniel P. Berrangé [Tue, 9 Oct 2018 09:55:14 +0000 (10:55 +0100)]
crypto: convert xts_mult_x to use xts_uint128 type
Using 64-bit arithmetic increases the performance for xts-aes-128
when built with gcrypt:
Encrypt: 355 MB/s -> 545 MB/s
Decrypt: 362 MB/s -> 568 MB/s
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Daniel P. Berrangé [Tue, 9 Oct 2018 09:50:43 +0000 (10:50 +0100)]
crypto: convert xts_tweak_encdec to use xts_uint128 type
Using 64-bit arithmetic increases the performance for xts-aes-128
when built with gcrypt:
Encrypt: 272 MB/s -> 355 MB/s
Decrypt: 275 MB/s -> 362 MB/s
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Daniel P. Berrangé [Tue, 9 Oct 2018 09:45:41 +0000 (10:45 +0100)]
crypto: introduce a xts_uint128 data type
The new type is designed to allow use of 64-bit arithmetic instead
of operating 1-byte at a time. The following patches will use this to
improve performance.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Daniel P. Berrangé [Mon, 8 Oct 2018 13:13:28 +0000 (14:13 +0100)]
crypto: remove code duplication in tweak encrypt/decrypt
The tweak encrypt/decrypt functions are identical except for the
comments, so can be merged. Profiling data shows that the compiler is
in fact already merging the two merges in the object files.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Daniel P. Berrangé [Mon, 8 Oct 2018 13:12:04 +0000 (14:12 +0100)]
crypto: expand algorithm coverage for cipher benchmark
Add testing coverage for AES with XTS, ECB and CTR modes
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Peter Maydell [Wed, 24 Oct 2018 15:31:40 +0000 (16:31 +0100)]
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-oct-2018-part-2-v2' into staging
MIPS queue for October 2018 - part 2 - v2
# gpg: Signature made Wed 24 Oct 2018 14:22:54 BST
# gpg: using RSA key
D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-oct-2018-part-2-v2: (33 commits)
target/mips: Fix decoding of ALIGN and DALIGN instructions
target/mips: Fix the title of translate.c
linux-user/mips: Recognize the R5900 CPU model
target/mips: Define the R5900 CPU
tests/tcg/mips: Add tests for R5900 DIVU1
tests/tcg/mips: Add tests for R5900 DIV1
tests/tcg/mips: Add tests for R5900 MTLO1 and MTHI1
tests/tcg/mips: Add tests for R5900 MFLO1 and MFHI1
tests/tcg/mips: Add tests for R5900 three-operand MULTU1
tests/tcg/mips: Add tests for R5900 three-operand MULT1
tests/tcg/mips: Add tests for R5900 three-operand MULTU
tests/tcg/mips: Add tests for R5900 three-operand MULT
target/mips: Make R5900 DMULT[U], DDIV[U], LL[D] and SC[D] user only
target/mips: Support R5900 MOVN, MOVZ and PREF instructions from MIPS IV
target/mips: Support R5900 DIV1 and DIVU1 instructions
target/mips: Support R5900 MFLO1, MTLO1, MFHI1 and MTHI1 instructions
target/mips: Support R5900 three-operand MULT1 and MULTU1 instructions
target/mips: Support R5900 three-operand MULT and MULTU instructions
target/mips: Add a placeholder for R5900 MMI3 instruction subclass
target/mips: Add a placeholder for R5900 MMI2 instruction subclass
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 24 Oct 2018 15:01:05 +0000 (16:01 +0100)]
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2018-10-24' into staging
- Disable migration-test with TCG on s390x (since there are known problems)
- Small Makefile improvements
- More modern shell scripting changes (use $() instead of ``)
- Add a configure option to disable AVX2
# gpg: Signature made Wed 24 Oct 2018 08:04:33 BST
# gpg: using RSA key
2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>"
# gpg: aka "Thomas Huth <thuth@redhat.com>"
# gpg: aka "Thomas Huth <huth@tuxfamily.org>"
# gpg: aka "Thomas Huth <th.huth@posteo.de>"
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2018-10-24:
configure: Provide option to explicitly disable AVX2
po/Makefile: Modern shell scripting (use $() instead of ``)
debian-bootstrap.pre: Modern shell scripting (use $() instead of ``)
configs: Add a CONFIG_SMC37C669 switch for the "smc37c669-superio" device
hw/core: Move null-machine into the common-obj list
tests/migration-test: Disable s390x test when running with TCG
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Aleksandar Markovic [Mon, 22 Oct 2018 11:19:25 +0000 (13:19 +0200)]
target/mips: Fix decoding of ALIGN and DALIGN instructions
Opcode for ALIGN and DALIGN must be in fact ranges of opcodes, to
allow paremeter 'bp' to occupy two and three bits, respectively.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Aleksandar Markovic [Mon, 22 Oct 2018 11:09:35 +0000 (13:09 +0200)]
target/mips: Fix the title of translate.c
Replace MIPS32 with MIPS, since the file covers all generations
of MIPS architectures.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:44:58 +0000 (17:44 +0200)]
linux-user/mips: Recognize the R5900 CPU model
This kind of ELF for the R5900 relies on an IEEE 754-1985 compliant FPU.
The R5900 FPU hardware is noncompliant and it is therefore emulated in
software by the Linux kernel. QEMU emulates a compliant FPU accordingly.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:44:46 +0000 (17:44 +0200)]
target/mips: Define the R5900 CPU
The primary purpose of this change is to support programs compiled by
GCC for the R5900 target and thereby run R5900 Linux distributions, for
example Gentoo.
GCC in version 7.3, by itself, by inspection of the GCC source code
and inspection of the generated machine code, for the R5900 target,
only emits two instructions that are specific to the R5900: the three-
operand MULT and MULTU. GCC and libc also emit certain MIPS III
instructions that are not part of the R5900 ISA. They are normally
trapped and emulated by the Linux kernel, and therefore need to be
treated accordingly by QEMU.
A program compiled by GCC is taken to mean source code compiled by GCC
under the restrictions above. One can, with the apparent limitations,
with a bit of effort obtain a fully functioning operating system such
as R5900 Gentoo. Strictly speaking, programs need not be compiled by
GCC to make use of this change.
Instructions and other facilities of the R5900 not implemented by this
change are intended to signal provisional exceptions. One such example
is the FPU that is not compliant with IEEE 754-1985 in system mode. It
is therefore provisionally disabled. In user space the FPU is trapped
and emulated by IEEE 754-1985 compliant software in the kernel, and
this is handled accordingly by QEMU. Another example is the 93
multimedia instructions specific to the R5900 that generate provisional
reserved instruction exception signals.
One of the benefits of running a Linux distribution under QEMU is that
programs can be compiled with a native compiler, where the host and
target are the same, as opposed to a cross-compiler, where they are
not the same. This is especially important in cases where the target
hardware does not have the resources to run a native compiler.
Problems with cross-compilation are often related to host and target
differences in integer sizes, pointer sizes, endianness, machine code,
ABI, etc. Sometimes cross-compilation is not even supported by the
build script for a given package. One effective way to avoid those
problems is to replace the cross-compiler with a native compiler. This
change of compilation methods does not resolve the inherent problems
with cross-compilation.
The native compiler naturally replaces the cross-compiler, because one
typically uses one or the other, and preferably the native compiler
when the circumstances admit this. The native compiler is also a good
test case for the R5900 QEMU user mode. Additionally, Gentoo is well-
known for compiling and installing its packages from sources.
This change has been tested with Gentoo compiled for R5900, including
native compilation of several packages under QEMU.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:42:19 +0000 (17:42 +0200)]
tests/tcg/mips: Add tests for R5900 DIVU1
Add a test for DIVU1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:42:08 +0000 (17:42 +0200)]
tests/tcg/mips: Add tests for R5900 DIV1
Add a test for DIV1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:41:58 +0000 (17:41 +0200)]
tests/tcg/mips: Add tests for R5900 MTLO1 and MTHI1
Add a test for MTLO1 and MTHI1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:41:47 +0000 (17:41 +0200)]
tests/tcg/mips: Add tests for R5900 MFLO1 and MFHI1
Add a test for MFLO1 and MFHI1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:41:32 +0000 (17:41 +0200)]
tests/tcg/mips: Add tests for R5900 three-operand MULTU1
Add a test for MULTU1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:41:21 +0000 (17:41 +0200)]
tests/tcg/mips: Add tests for R5900 three-operand MULT1
Add a test for MULT1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:41:13 +0000 (17:41 +0200)]
tests/tcg/mips: Add tests for R5900 three-operand MULTU
Add a test for MULTU.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:41:01 +0000 (17:41 +0200)]
tests/tcg/mips: Add tests for R5900 three-operand MULT
Add a test for MULT.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:40:18 +0000 (17:40 +0200)]
target/mips: Make R5900 DMULT[U], DDIV[U], LL[D] and SC[D] user only
The Linux kernel traps certain reserved instruction exceptions to
emulate the corresponding instructions. QEMU plays the role of the
kernel in user mode, so those traps are emulated by accepting the
instructions.
This change adds the function check_insn_opc_user_only to signal a
reserved instruction exception for flagged CPUs in QEMU system mode.
The MIPS III instructions DMULT[U], DDIV[U], LL[D] and SC[D] are not
implemented in R5900 hardware. They are trapped and emulated by the
Linux kernel and, accordingly, therefore QEMU user only instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:39:17 +0000 (17:39 +0200)]
target/mips: Support R5900 MOVN, MOVZ and PREF instructions from MIPS IV
The R5900 is taken to be MIPS III with certain modifications. From
MIPS IV it implements the instructions MOVN, MOVZ and PREF.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:39:03 +0000 (17:39 +0200)]
target/mips: Support R5900 DIV1 and DIVU1 instructions
Add support for DIV1 and DIVU1 instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:38:49 +0000 (17:38 +0200)]
target/mips: Support R5900 MFLO1, MTLO1, MFHI1 and MTHI1 instructions
Add support for MFLO1, MTLO1, MFHI1 and MTHI1 instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:38:36 +0000 (17:38 +0200)]
target/mips: Support R5900 three-operand MULT1 and MULTU1 instructions
Add support for MULT1 and MULTU1 instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:38:21 +0000 (17:38 +0200)]
target/mips: Support R5900 three-operand MULT and MULTU instructions
The three-operand MULT and MULTU are the only R5900-specific
instructions emitted by GCC 7.3. The R5900 also implements the three-
operand MADD and MADDU instructions, but they are omitted in QEMU for
now since they are absent in programs compiled by current GCC versions.
Likewise, the R5900-specific pipeline 1 instruction variants MULT1,
MULTU1, DIV1, DIVU1, MADD1, MADDU1, MFHI1, MFLO1, MTHI1 and MTLO1
are omitted here as well.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:37:18 +0000 (17:37 +0200)]
target/mips: Add a placeholder for R5900 MMI3 instruction subclass
Add a placeholder for MMI3 subclass.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:37:06 +0000 (17:37 +0200)]
target/mips: Add a placeholder for R5900 MMI2 instruction subclass
Add a placeholder for MMI2 subclass.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:36:54 +0000 (17:36 +0200)]
target/mips: Add a placeholder for R5900 MMI1 instruction subclass
Add a placeholder for MM1 subclass.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:36:41 +0000 (17:36 +0200)]
target/mips: Add a placeholder for R5900 MMI0 instruction subclass
Add a placeholder for MMI0 subclass.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:36:23 +0000 (17:36 +0200)]
target/mips: Add a placeholder for R5900 MMI instruction class
Add a placeholder for MMI class. This is the main palceholder for
MMI ASE.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:35:56 +0000 (17:35 +0200)]
target/mips: Add a placeholder for R5900 LQ
Add a placeholder for LQ instruction.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:35:41 +0000 (17:35 +0200)]
target/mips: Add a placeholder for R5900 SQ, handle user mode RDHWR
Add placeholder for SQ instruction, handle RDHWR.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:34:46 +0000 (17:34 +0200)]
target/mips: Define R5900 MMI3 opcode constants
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:34:21 +0000 (17:34 +0200)]
target/mips: Define R5900 MMI2 opcode constants
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:34:11 +0000 (17:34 +0200)]
target/mips: Define R5900 MMI1 opcode constants
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:34:04 +0000 (17:34 +0200)]
target/mips: Define R5900 MMI0 opcode constants
Add definition of MI0 opcodes.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:33:32 +0000 (17:33 +0200)]
target/mips: Define R5900 MMI<0|1|2|3> subclasses and opcode constants
Define MMI0, MMI1, MMI2, MMI3 subclass opcodes, and other opcodes of
instructions in MMI class.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:33:20 +0000 (17:33 +0200)]
target/mips: Define R5900 MMI class, and LQ and SQ opcode constants
Define MMI class, LQ, and SQ R5900 opdoces.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:32:36 +0000 (17:32 +0200)]
target/mips: Add R5900 Multimedia Instruction overview note
Add a comment on R5900 MMI ASE (short overview).
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:31:26 +0000 (17:31 +0200)]
target/mips: Define R5900 ISA, MMI ASE, and R5900 CPU preprocessor constants
The R5900 implements the 64-bit MIPS III instruction set except
DMULT, DMULTU, DDIV, DDIVU, LL, SC, LLD and SCD. The MIPS IV
instructions MOVN, MOVZ and PREF are implemented. It has the
R5900-specific three-operand instructions MADD, MADDU, MULT and
MULTU as well as pipeline 1 versions MULT1, MULTU1, DIV1, DIVU1,
MADD1, MADDU1, MFHI1, MFLO1, MTHI1 and MTLO1. A set of 93 128-bit
multimedia instructions specific to the R5900 is also implemented.
The Toshiba TX System RISC TX79 Core Architecture manual:
https://wiki.qemu.org/File:C790.pdf
describes the C790 processor that is a follow-up to the R5900. There
are a few notable differences in that the R5900 FPU
- is not IEEE 754-1985 compliant,
- does not implement double format, and
- its machine code is nonstandard.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Peter Maydell [Wed, 24 Oct 2018 09:49:14 +0000 (10:49 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20181024' into staging
target-arm queue:
* ssi-sd: Make devices picking up backends unavailable with -device
* Add support for VCPU event states
* Move towards making ID registers the source of truth for
whether a guest CPU implements a feature, rather than having
parallel ID registers and feature bit flags
* Implement various HCR hypervisor trap/config bits
* Get IL bit correct for v7 syndrome values
* Report correct syndrome for FP/SIMD traps to Hyp mode
* hw/arm/boot: Increase compliance with kernel arm64 boot protocol
* Refactor A32 Neon to use generic vector infrastructure
* Fix a bug in A32 VLD2 "(multiple 2-element structures)" insn
* net: cadence_gem: Report features correctly in ID register
* Avoid some unnecessary TLB flushes on TTBR register writes
# gpg: Signature made Wed 24 Oct 2018 10:46:01 BST
# gpg: using RSA key
3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-
20181024: (44 commits)
target/arm: Only flush tlb if ASID changes
target/arm: Remove writefn from TTBR0_EL3
net: cadence_gem: Announce 64bit addressing support
net: cadence_gem: Announce availability of priority queues
target/arm: Reorg NEON VLD/VST single element to one lane
target/arm: Promote consecutive memory ops for aa32
target/arm: Reorg NEON VLD/VST all elements
target/arm: Use gvec for NEON VLD all lanes
target/arm: Use gvec for NEON_3R_VTST_VCEQ, NEON_3R_VCGT, NEON_3R_VCGE
target/arm: Use gvec for NEON_3R_VML
target/arm: Use gvec for VSRI, VSLI
target/arm: Use gvec for VSRA
target/arm: Use gvec for VSHR, VSHL
target/arm: Use gvec for NEON_3R_VMUL
target/arm: Use gvec for NEON_2RM_VMN, NEON_2RM_VNEG
target/arm: Use gvec for NEON_3R_VADD_VSUB insns
target/arm: Use gvec for NEON_3R_LOGIC insns
target/arm: Use gvec for NEON VMOV, VMVN, VBIC & VORR (immediate)
target/arm: Use gvec for NEON VDUP
target/arm: Mark some arrays const
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:20 +0000 (07:50 +0100)]
target/arm: Only flush tlb if ASID changes
Since QEMU does not implement ASIDs, changes to the ASID must flush the
tlb. However, if the ASID does not change there is no reason to flush.
In testing a boot of the Ubuntu installer to the first menu, this reduces
the number of flushes by 30%, or nearly 600k instances.
Reviewed-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id:
20181019015617.22583-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:20 +0000 (07:50 +0100)]
target/arm: Remove writefn from TTBR0_EL3
The EL3 version of this register does not include an ASID,
and so the tlb_flush performed by vmsa_ttbr_write is not needed.
Reviewed-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
20181019015617.22583-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Wed, 24 Oct 2018 06:50:20 +0000 (07:50 +0100)]
net: cadence_gem: Announce 64bit addressing support
Announce 64bit addressing support.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
20181017213932.19973-3-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Wed, 24 Oct 2018 06:50:20 +0000 (07:50 +0100)]
net: cadence_gem: Announce availability of priority queues
Announce the availability of the various priority queues.
This fixes an issue where guest kernels would miss to
configure secondary queues due to inproper feature bits.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
20181017213932.19973-2-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:20 +0000 (07:50 +0100)]
target/arm: Reorg NEON VLD/VST single element to one lane
Instead of shifts and masks, use direct loads and stores from
the neon register file.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181011205206.3552-21-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:20 +0000 (07:50 +0100)]
target/arm: Promote consecutive memory ops for aa32
For a sequence of loads or stores from a single register,
little-endian operations can be promoted to an 8-byte op.
This can reduce the number of operations by a factor of 8.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181011205206.3552-20-richard.henderson@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:20 +0000 (07:50 +0100)]
target/arm: Reorg NEON VLD/VST all elements
Instead of shifts and masks, use direct loads and stores from the neon
register file. Mirror the iteration structure of the ARM pseudocode
more closely. Correct the parameters of the VLD2 A2 insn.
Note that this includes a bugfix for handling of the insn
"VLD2 (multiple 2-element structures)" -- we were using an
incorrect stride value.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181011205206.3552-19-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:20 +0000 (07:50 +0100)]
target/arm: Use gvec for NEON VLD all lanes
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181011205206.3552-18-richard.henderson@linaro.org
[PMM: added parens in ?: expression]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:20 +0000 (07:50 +0100)]
target/arm: Use gvec for NEON_3R_VTST_VCEQ, NEON_3R_VCGT, NEON_3R_VCGE
Move cmtst_op expanders from translate-a64.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181011205206.3552-17-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:19 +0000 (07:50 +0100)]
target/arm: Use gvec for NEON_3R_VML
Move mla_op and mls_op expanders from translate-a64.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181011205206.3552-16-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:19 +0000 (07:50 +0100)]
target/arm: Use gvec for VSRI, VSLI
Move shi_op and sli_op expanders from translate-a64.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181011205206.3552-15-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:19 +0000 (07:50 +0100)]
target/arm: Use gvec for VSRA
Move ssra_op and usra_op expanders from translate-a64.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181011205206.3552-14-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:19 +0000 (07:50 +0100)]
target/arm: Use gvec for VSHR, VSHL
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181011205206.3552-13-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:19 +0000 (07:50 +0100)]
target/arm: Use gvec for NEON_3R_VMUL
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181011205206.3552-12-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:19 +0000 (07:50 +0100)]
target/arm: Use gvec for NEON_2RM_VMN, NEON_2RM_VNEG
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181011205206.3552-11-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:19 +0000 (07:50 +0100)]
target/arm: Use gvec for NEON_3R_VADD_VSUB insns
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181011205206.3552-10-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:19 +0000 (07:50 +0100)]
target/arm: Use gvec for NEON_3R_LOGIC insns
Move expanders for VBSL, VBIT, and VBIF from translate-a64.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181011205206.3552-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:19 +0000 (07:50 +0100)]
target/arm: Use gvec for NEON VMOV, VMVN, VBIC & VORR (immediate)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181011205206.3552-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:19 +0000 (07:50 +0100)]
target/arm: Use gvec for NEON VDUP
Also introduces neon_element_offset to find the env offset
of a specific element within a neon register.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181011205206.3552-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:18 +0000 (07:50 +0100)]
target/arm: Mark some arrays const
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id:
20181011205206.3552-6-richard.henderson@linaro.org
[PMM: drop change to now-deleted cpu_mode_names array]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:18 +0000 (07:50 +0100)]
target/arm: Promote consecutive memory ops for aa64
For a sequence of loads or stores from a single register,
little-endian operations can be promoted to an 8-byte op.
This can reduce the number of operations by a factor of 8.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181011205206.3552-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:18 +0000 (07:50 +0100)]
target/arm: Use tcg_gen_gvec_dup_i64 for LD[1-4]R
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181011205206.3552-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:18 +0000 (07:50 +0100)]
target/arm: Don't call tcg_clear_temp_count
This is done generically in translator_loop.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id:
20181011205206.3552-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:18 +0000 (07:50 +0100)]
target/arm: Hoist address increment for vector memory ops
This can reduce the number of opcodes required for certain
complex forms of load-multiple (e.g. ld4.16b).
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id:
20181011205206.3552-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stewart Hildebrand [Wed, 24 Oct 2018 06:50:18 +0000 (07:50 +0100)]
hw/arm/boot: Increase compliance with kernel arm64 boot protocol
"The Image must be placed text_offset bytes from a 2MB aligned base
address anywhere in usable system RAM and called there."
For the virt board, we write our startup bootloader at the very
bottom of RAM, so that bit can't be used for the image. To avoid
overlap in case the image requests to be loaded at an offset
smaller than our bootloader, we increment the load offset to the
next 2MB.
This fixes a boot failure for Xen AArch64.
Signed-off-by: Stewart Hildebrand <stewart.hildebrand@dornerworks.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Message-id:
b8a89518794b4436af0c151ed10de4fa@dornerworks.com
[PMM: Rephrased a comment a bit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 24 Oct 2018 06:50:18 +0000 (07:50 +0100)]
target/arm: Report correct syndrome for FP/SIMD traps to Hyp mode
For traps of FP/SIMD instructions to AArch32 Hyp mode, the syndrome
provided in HSR has more information than is reported to AArch64.
Specifically, there are extra fields TA and coproc which indicate
whether the trapped instruction was FP or SIMD. Add this extra
information to the syndromes we construct, and mask it out when
taking the exception to AArch64.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181012144235.19646-11-peter.maydell@linaro.org
Peter Maydell [Wed, 24 Oct 2018 06:50:18 +0000 (07:50 +0100)]
target/arm: Get IL bit correct for v7 syndrome values
For the v7 version of the Arm architecture, the IL bit in
syndrome register values where the field is not valid was
defined to be UNK/SBZP. In v8 this is RES1, which is what
QEMU currently implements. Handle the desired v7 behaviour
by squashing the IL bit for the affected cases:
* EC == EC_UNCATEGORIZED
* prefetch aborts
* data aborts where ISV is 0
(The fourth case listed in the v8 Arm ARM DDI 0487C.a in
section G7.2.70, "illegal state exception", can't happen
on a v7 CPU.)
This deals with a corner case noted in a comment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181012144235.19646-10-peter.maydell@linaro.org
Peter Maydell [Wed, 24 Oct 2018 06:50:18 +0000 (07:50 +0100)]
target/arm: New utility function to extract EC from syndrome
Create and use a utility function to extract the EC field
from a syndrome, rather than open-coding the shift.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181012144235.19646-9-peter.maydell@linaro.org
Peter Maydell [Wed, 24 Oct 2018 06:50:18 +0000 (07:50 +0100)]
target/arm: Implement HCR.PTW
If the HCR_EL2 PTW virtualizaiton configuration register bit
is set, then this means that a stage 2 Permission fault must
be generated if a stage 1 translation table access is made
to an address that is mapped as Device memory in stage 2.
Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181012144235.19646-8-peter.maydell@linaro.org
Peter Maydell [Wed, 24 Oct 2018 06:50:17 +0000 (07:50 +0100)]
target/arm: Implement HCR.VI and VF
The HCR_EL2 VI and VF bits are supposed to track whether there is
a pending virtual IRQ or virtual FIQ. For QEMU we store the
pending VIRQ/VFIQ status in cs->interrupt_request, so this means:
* if the register is read we must get these bit values from
cs->interrupt_request
* if the register is written then we must write the bit
values back into cs->interrupt_request
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181012144235.19646-7-peter.maydell@linaro.org
Peter Maydell [Wed, 24 Oct 2018 06:50:17 +0000 (07:50 +0100)]
target/arm: ISR_EL1 bits track virtual interrupts if IMO/FMO set
The A/I/F bits in ISR_EL1 should track the virtual interrupt
status, not the physical interrupt status, if the associated
HCR_EL2.AMO/IMO/FMO bit is set. Implement this, rather than
always showing the physical interrupt status.
We don't currently implement anything to do with external
aborts, so this applies only to the I and F bits (though it
ought to be possible for the outer guest to present a virtual
external abort to the inner guest, even if QEMU doesn't
emulate physical external aborts, so there is missing
functionality in this area).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181012144235.19646-6-peter.maydell@linaro.org
Peter Maydell [Wed, 24 Oct 2018 06:50:17 +0000 (07:50 +0100)]
target/arm: Implement HCR.DC
The HCR.DC virtualization configuration register bit has the
following effects:
* SCTLR.M behaves as if it is 0 for all purposes except
direct reads of the bit
* HCR.VM behaves as if it is 1 for all purposes except
direct reads of the bit
* the memory type produced by the first stage of the EL1&EL0
translation regime is Normal Non-Shareable,
Inner Write-Back Read-Allocate Write-Allocate,
Outer Write-Back Read-Allocate Write-Allocate.
Implement this behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181012144235.19646-5-peter.maydell@linaro.org
Peter Maydell [Wed, 24 Oct 2018 06:50:17 +0000 (07:50 +0100)]
target/arm: Implement HCR.FB
The HCR.FB virtualization configuration register bit requests that
TLB maintenance, branch predictor invalidate-all and icache
invalidate-all operations performed in NS EL1 should be upgraded
from "local CPU only to "broadcast within Inner Shareable domain".
For QEMU we NOP the branch predictor and icache operations, so
we only need to upgrade the TLB invalidates:
AArch32 TLBIALL, TLBIMVA, TLBIASID, DTLBIALL, DTLBIMVA, DTLBIASID,
ITLBIALL, ITLBIMVA, ITLBIASID, TLBIMVAA, TLBIMVAL, TLBIMVAAL
AArch64 TLBI VMALLE1, TLBI VAE1, TLBI ASIDE1, TLBI VAAE1,
TLBI VALE1, TLBI VAALE1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181012144235.19646-4-peter.maydell@linaro.org
Peter Maydell [Wed, 24 Oct 2018 06:50:17 +0000 (07:50 +0100)]
target/arm: Make switch_mode() file-local
The switch_mode() function is defined in target/arm/helper.c and used
only in that file and nowhere else, so we can make it file-local
rather than global.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181012144235.19646-3-peter.maydell@linaro.org
Peter Maydell [Wed, 24 Oct 2018 06:50:17 +0000 (07:50 +0100)]
target/arm: Improve debug logging of AArch32 exception return
For AArch32, exception return happens through certain kinds
of CPSR write. We don't currently have any CPU_LOG_INT logging
of these events (unlike AArch64, where we log in the ERET
instruction). Add some suitable logging.
This will log exception returns like this:
Exception return from AArch32 hyp to usr PC 0x80100374
paralleling the existing logging in the exception_return
helper for AArch64 exception returns:
Exception return from AArch64 EL2 to AArch64 EL0 PC 0x8003045c
Exception return from AArch64 EL2 to AArch32 EL0 PC 0x8003045c
(Note that an AArch32 exception return can only be
AArch32->AArch32, never to AArch64.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181012144235.19646-2-peter.maydell@linaro.org
Richard Henderson [Wed, 24 Oct 2018 06:50:17 +0000 (07:50 +0100)]
target/arm: Convert v8.2-fp16 from feature bit to aa64pfr0 test
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181016223115.24100-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:17 +0000 (07:50 +0100)]
target/arm: Convert sve from feature bit to aa64pfr0 test
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181016223115.24100-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:17 +0000 (07:50 +0100)]
target/arm: Convert jazelle from feature bit to isar1 test
Having V6 alone imply jazelle was wrong for cortex-m0.
Change to an assertion for V6 & !M.
This was harmless, because the only place we tested ARM_FEATURE_JAZELLE
was for 'bxj' in disas_arm(), which is unreachable for M-profile cores.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181016223115.24100-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:16 +0000 (07:50 +0100)]
target/arm: Convert division from feature bits to isar0 tests
Both arm and thumb2 division are controlled by the same ISAR field,
which takes care of the arm implies thumb case. Having M imply
thumb2 division was wrong for cortex-m0, which is v6m and does not
have thumb2 at all, much less thumb2 division.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181016223115.24100-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:16 +0000 (07:50 +0100)]
target/arm: Convert v8 extensions from feature bits to isar tests
Most of the v8 extensions are self-contained within the ISAR
registers and are not implied by other feature bits, which
makes them the easiest to convert.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181016223115.24100-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:16 +0000 (07:50 +0100)]
target/arm: V8M should not imply V7VE
Instantiating mps2-an505 (cortex-m33) will fail make check when
V7VE asserts that ID_ISAR0.Divide includes ARM division. It is
also wrong to include ARM_FEATURE_LPAE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181016223115.24100-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 24 Oct 2018 06:50:16 +0000 (07:50 +0100)]
target/arm: Move some system registers into a substructure
Create struct ARMISARegisters, to be accessed during translation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20181016223115.24100-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Dongjiu Geng [Wed, 24 Oct 2018 06:50:16 +0000 (07:50 +0100)]
target/arm: Add support for VCPU event states
This patch extends the qemu-kvm state sync logic with support for
KVM_GET/SET_VCPU_EVENTS, giving access to yet missing SError exception.
And also it can support the exception state migration.
The SError exception states include SError pending state and ESR value,
the kvm_put/get_vcpu_events() will be called when set or get system
registers. When do migration, if source machine has SError pending,
QEMU will do this migration regardless whether the target machine supports
to specify guest ESR value, because if target machine does not support that,
it can also inject the SError with zero ESR value.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1538067351-23931-3-git-send-email-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Markus Armbruster [Wed, 24 Oct 2018 06:50:16 +0000 (07:50 +0100)]
ssi-sd: Make devices picking up backends unavailable with -device
Device models aren't supposed to go on fishing expeditions for
backends. They should expose suitable properties for the user to set.
For onboard devices, board code sets them.
Device ssi-sd picks up its block backend in its init() method with
drive_get_next() instead. This mistake is already marked FIXME since
commit
af9e40a.
Unset user_creatable to remove the mistake from our external
interface. Since the SSI bus doesn't support hotplug, only -device
can be affected. Only certain ARM machines have ssi-sd and provide an
SSI bus for it; this patch breaks -device ssi-sd for these machines.
No actual use of -device ssi-sd is known.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id:
20181009060835.4608-1-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Liam Merwick [Fri, 19 Oct 2018 20:38:59 +0000 (21:38 +0100)]
configure: Provide option to explicitly disable AVX2
The configure script detects if the compiler has AVX2 support and
automatically sets avx2_opt="yes" which in turn defines CONFIG_AVX2_OPT.
There is no way of explicitly overriding this setting so this commit adds
two command-line options: --enable-avx2 and --disable-avx2.
The default behaviour, when no option is specified, is to maintain the
current behaviour and enable AVX2 if the compiler supports it.
Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
Reviewed-by: Darren Kenny <Darren.Kenny@oracle.com>
Reviewed-by: Mark Kanda <Mark.Kanda@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Mao Zhongyi [Mon, 22 Oct 2018 08:48:24 +0000 (16:48 +0800)]
po/Makefile: Modern shell scripting (use $() instead of ``)
Various shell files contain a mix between obsolete ``
and modern $(); It would be nice to convert to using $()
everywhere.
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Mao Zhongyi [Mon, 22 Oct 2018 08:48:23 +0000 (16:48 +0800)]
debian-bootstrap.pre: Modern shell scripting (use $() instead of ``)
Various shell files contain a mix between obsolete ``
and modern $(); It would be nice to convert to using $()
everywhere.
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>