OSDN Git Service
Jacopo Mondi [Thu, 19 Nov 2020 16:32:38 +0000 (17:32 +0100)]
media: ov5647: Implement set_fmt pad operation
Now that the driver supports more than a single mode, implement the
.set_fmt pad operation and adjust the existing .get_fmt one to report
the currently applied format.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jacopo Mondi [Thu, 19 Nov 2020 16:32:37 +0000 (17:32 +0100)]
media: ov5647: Use SBGGR10_1X10 640x480 as default
The SBGGR10_1X10 formats support more resolutions than SBGGR8_1X8.
Make it the default sensor format and set 2x2 binned 640x480 resolution
as default sensor size as it maximizes the FOV and framerate.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jacopo Mondi [Thu, 19 Nov 2020 16:32:36 +0000 (17:32 +0100)]
media: ov5647: Add SGGBR10_1X10 modes
Add 4 additional sensor modes in SBGGR10_1X10 format.
Add the following resolutions:
- 2592x1944 full resolution
- 1920x1080 1080p cropped
- 1296x972 2x2 binned
- 640x480 2x2 binned, 2x2 subsampled
The register lists and modes definition have been upported from the
RaspberryPi BSP at revision:
commit
581dfda6d0a62 ("media: i2c: ov5647: Advertise the correct exposure range")
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jacopo Mondi [Thu, 19 Nov 2020 16:32:35 +0000 (17:32 +0100)]
media: ov5647: Rename SBGGR8 VGA mode
Before adding new modes, rename the only existing one to report
the bit depth to distinguish it from future additions.
While at it, briefly describe the mode.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dave Stevenson [Thu, 19 Nov 2020 16:32:34 +0000 (17:32 +0100)]
media: ov5647: Add support for get_selection()
Support the get_selection() pad operation to report the device
full pixel array size, the currently applied analogue crop rectangle and
the active pixel array dimensions.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jacopo Mondi [Thu, 19 Nov 2020 16:32:33 +0000 (17:32 +0100)]
media: ov5647: Break out format handling
Break format handling out from the main driver structure.
This commit prepares for the introduction of more sensor formats and
resolutions by instrumenting the existing operation to work on multiple
modes instead of assuming a single supported one.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jacopo Mondi [Thu, 19 Nov 2020 16:32:32 +0000 (17:32 +0100)]
media: ov5647: Rationalize driver structure name
The driver structure name is referred to with different names ('ov5647',
'state', 'sensor') in different functions in the driver.
Polish this up by using 'struct ov5647 *sensor' everywhere.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
David Plowman [Thu, 19 Nov 2020 16:32:31 +0000 (17:32 +0100)]
media: ov5647: Support gain, exposure and AWB controls
Add controls to support AWB, AEC and AGC. Also add control support to
set exposure (in lines) and analogue gain (as a register code).
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jacopo Mondi [Thu, 19 Nov 2020 16:32:30 +0000 (17:32 +0100)]
media: ov5647: Protect s_stream() with mutex
Use the driver mutex to protect s_stream() operations.
This will become more relevant once the sensor will support more formats
and set_format() could be issue concurrently to s_stream().
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jacopo Mondi [Thu, 19 Nov 2020 16:32:29 +0000 (17:32 +0100)]
media: ov5647: Implement enum_frame_size()
Implement the .enum_frame_size subdev pad operation.
As the driver only supports one format and one resolution at the moment
the implementation is trivial.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jacopo Mondi [Thu, 19 Nov 2020 16:19:35 +0000 (17:19 +0100)]
media: ov5647: Program mode at s_stream(1) time
Rename __sensor_init() function to ov5647_set_mode() as the function
is a regular one and the double underscores prefix shall be removed, and
then move it to program the mode at s_stream(1) time, not at sensor power
up.
Break out from __sensor_init() the stream_off() operation call at sensor
power up to coax the lanes in LP-11 state.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jacopo Mondi [Thu, 19 Nov 2020 16:19:34 +0000 (17:19 +0100)]
media: ov5647: Fix return value from read/write
The ov5647_read()/ov5647_write() return in case of success the number
of bytes read or written respectively. This requires callers to check
if the return value is less than zero to detect an error. Unfortunately,
in several places, callers directly return the result of a read/write
call, causing issues when the returned valued is checked to be different
from zero to detect an error.
Fix this by returning zero if i2c_master_send() and i2c_master_read()
return a positive value (the number of bytes written or read).
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jacopo Mondi [Thu, 19 Nov 2020 16:19:33 +0000 (17:19 +0100)]
media: ov5647: Replace license with SPDX identifier
Replace the boilerplate license text with the SPDX identifier.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jacopo Mondi [Thu, 19 Nov 2020 16:19:32 +0000 (17:19 +0100)]
media: ov5647: Fix style issues
The driver has some obvious style issues which are worth fixing before
expanding the driver capabilities.
Fix:
- Variable declaration order
- Function parameters alignment
- Multi-line comments and spurious line breaks
- Use lowercase for hexadecimal values
- > 80 cols lines
Cosmetic change, no functional changes intended.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jacopo Mondi [Thu, 19 Nov 2020 16:19:31 +0000 (17:19 +0100)]
media: ov5647: Fix format initialization
The driver currently support a single format. Fix its initialization to
use the only supported resolution.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dave Stevenson [Thu, 19 Nov 2020 16:19:30 +0000 (17:19 +0100)]
media: ov5647: Add set_fmt and get_fmt calls.
There's no way to query the subdevice for the supported
resolutions. Add set_fmt and get_fmt implementations. Since there's
only one format supported set_fmt does nothing and get returns single
format.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dave Stevenson [Thu, 19 Nov 2020 16:19:29 +0000 (17:19 +0100)]
media: ov5647: Add support for non-continuous clock mode
Add support for optional non-continuous clock mode to the ov5647
sensor driver.
Non-continuous clock saves a small amount of power and on some SoCs
is easier to interface with.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dave Stevenson [Thu, 19 Nov 2020 16:19:28 +0000 (17:19 +0100)]
media: ov5647: Add support for PWDN GPIO.
Add support for an optional GPIO connected to PWDN on the sensor. This
allows the use of hardware standby mode where internal device clock
and circuit activities are halted.
Please note that power is off when PWDN is high.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jacopo Mondi [Thu, 19 Nov 2020 16:19:27 +0000 (17:19 +0100)]
media: dt-bindings: media: i2c: Rename ov5647.yaml
Rename 'ov5647.yaml' as 'ovti,ov5647.yaml' and update the
MAINTAINERS file entry accordingly.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Tue, 30 Jun 2020 08:44:27 +0000 (10:44 +0200)]
media: i2c: imx219: take lock in imx219_enum_mbus_code/frame_size
These two functions did not take the imx219->mutex lock, but
imx219_get_format_code checks that a lock is taken, so it issues
a warning:
[ 8.738717] WARNING: CPU: 2 PID: 60 at drivers/media/i2c/imx219.c:653 imx219_get_format_code+0xac/0xc0
[ 8.748113] Modules linked in:
[ 8.751214] CPU: 2 PID: 60 Comm: kworker/2:1 Tainted: G W 5.8.0-rc1-arm64 #148
[ 8.759821] Hardware name: NVIDIA Jetson TX1 Developer Kit (DT)
[ 8.765806] Workqueue: events deferred_probe_work_func
[ 8.771003] pstate:
60000005 (nZCv daif -PAN -UAO BTYPE=--)
[ 8.776635] pc : imx219_get_format_code+0xac/0xc0
[ 8.781390] lr : imx219_get_format_code+0xa8/0xc0
[ 8.786143] sp :
ffff800012a538f0
[ 8.789495] x29:
ffff800012a538f0 x28:
ffff800012838e90
[ 8.794867] x27:
ffff0000f28c5800 x26:
ffff800011161c68
[ 8.800237] x25:
ffff0000f2a5a3f8 x24:
0000000000000018
[ 8.805605] x23:
ffff0000f284ef18 x22:
ffff0000f2a5a080
[ 8.810974] x21:
ffff0000f284ff00 x20:
ffff0000f2a5a080
[ 8.816343] x19:
000000000000300f x18:
00000000ffffffff
[ 8.821712] x17:
ffff800011c77268 x16:
00000000000040d7
[ 8.827081] x15:
00000000000040d8 x14:
0000000000000000
[ 8.832451] x13:
00000000000040d4 x12:
ffff800011d19300
[ 8.837819] x11:
00000000000208c0 x10:
0000000000000004
[ 8.843188] x9 :
000000003baa2ecd x8 :
000000008b3f9c73
[ 8.848558] x7 :
0000000000000008 x6 :
0000000000000034
[ 8.853929] x5 :
0000000000000000 x4 :
0000000000000001
[ 8.859297] x3 :
ffff800010a2a8a8 x2 :
ffff0000f84a8000
[ 8.864666] x1 :
0000000000000000 x0 :
0000000000000000
[ 8.870034] Call trace:
[ 8.872515] imx219_get_format_code+0xac/0xc0
[ 8.876921] imx219_enum_mbus_code+0x38/0x60
[ 8.881241] call_enum_mbus_code+0x50/0x70
[ 8.885387] tegra_vi_graph_notify_complete+0x290/0x5e8
[ 8.890670] v4l2_async_notifier_try_complete.part.0+0x48/0x68
[ 8.896563] v4l2_async_register_subdev+0x100/0x1c0
[ 8.901497] v4l2_async_register_subdev_sensor_common+0x70/0xf0
[ 8.907477] imx219_probe+0x590/0x728
[ 8.911184] i2c_device_probe+0xe4/0x2b0
[ 8.915151] really_probe+0xd8/0x330
[ 8.918768] driver_probe_device+0x58/0xb8
[ 8.922909] __device_attach_driver+0x84/0xc8
[ 8.927315] bus_for_each_drv+0x78/0xc8
[ 8.931193] __device_attach+0xe4/0x140
[ 8.935072] device_initial_probe+0x14/0x20
[ 8.939301] bus_probe_device+0x9c/0xa8
[ 8.943179] deferred_probe_work_func+0x74/0xb0
[ 8.947759] process_one_work+0x2c4/0x740
[ 8.951813] worker_thread+0x4c/0x430
[ 8.955518] kthread+0x158/0x178
[ 8.958786] ret_from_fork+0x10/0x1c
[ 8.962401] irq event stamp: 63536
[ 8.965846] hardirqs last enabled at (63535): [<
ffff800010082398>] el1_irq+0xd8/0x180
[ 8.973846] hardirqs last disabled at (63536): [<
ffff8000100a6484>] do_debug_exception+0x16c/0x258
[ 8.982895] softirqs last enabled at (63534): [<
ffff800010080d4c>] _stext+0x54c/0x594
[ 8.990896] softirqs last disabled at (63525): [<
ffff8000100c8350>] irq_exit+0x100/0x138
[ 8.999066] ---[ end trace
ebfbcd84b75ef921 ]---
[ 9.004354] ------------[ cut here ]------------
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sakari Ailus [Mon, 30 Nov 2020 13:46:06 +0000 (14:46 +0100)]
media: Documentation: v4l: Document that link_validate op is valid for sink only
The link_validate pad op will only be called on sink pads. Document this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sakari Ailus [Mon, 30 Nov 2020 13:44:32 +0000 (14:44 +0100)]
media: Documentation: v4l: Remove reference to video ops
We no longer have format related callbacks in video ops. Remove the
reference to them.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Michael Tretter [Wed, 2 Dec 2020 13:30:40 +0000 (14:30 +0100)]
media: allegro: rename stream_id to dst_handle
The dst_handle field in the PUT_STREAM_BUFFER and ENCODE_FRAME_RESPONSE
is used to retrieve the V4L2 CAPTURE buffer. Calling it stream_id is
confusing. Call it dst_handle inspired by src_handle for the OUTPUT
buffer.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Michael Tretter [Wed, 2 Dec 2020 13:30:39 +0000 (14:30 +0100)]
media: allegro: remove custom drain state handling
The v4l2-m2m has various helpers for correctly handle the draining. Drop
the driver specific state machine and use the m2m helper functions.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Michael Tretter [Wed, 2 Dec 2020 13:30:38 +0000 (14:30 +0100)]
media: dt-bindings: media: allegro,al5e: Convert to YAML
Convert the Allegro DVT video IP codec text binding to Yaml.
Add the converted binding to the MAINTAINERS file.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Michael Tretter [Wed, 2 Dec 2020 13:30:37 +0000 (14:30 +0100)]
media: allegro: move driver out of staging
The stateful encoder API was finalized. Nothing is blocking the driver
from being moved out of staging.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dan Carpenter [Mon, 14 Dec 2020 11:54:47 +0000 (12:54 +0100)]
media: allegro: Fix use after free on error
The "channel" is added to the "dev->channels" but then if
v4l2_m2m_ctx_init() fails then we free "channel" but it's still on the
list so it could lead to a use after free. Let's not add it to the
list until after v4l2_m2m_ctx_init() succeeds.
Fixes:
cc62c74749a3 ("media: allegro: add missed checks in allegro_open()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Tue, 1 Dec 2020 12:44:46 +0000 (13:44 +0100)]
media: cec: add EPOLLPRI in poll() when dev is unregistered
If the CEC device was unregistered, then add EPOLLPRI to
the poll() mask. Otherwise a select() that only waits for
exceptions will not wake up. A select() that waits for
read and/or write events *will* wake up on an EPOLLERR, but
not (for some reason) if it just waits for exceptions.
Strangly the epoll functionality will wakeup on EPOLLERR if
you just wait for an exception, so in this respect select()
and epoll differ.
In the end it doesn't really matter, what matters is that
polling file handles are woken up on device unregistration.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Tue, 1 Dec 2020 12:44:45 +0000 (13:44 +0100)]
media: v4l2-dev: add EPOLLPRI in v4l2_poll() when dev is unregistered
If the V4L2 device was unregistered, then add EPOLLPRI to
the poll mask. Otherwise a select() that only waits for
exceptions will not wake up. A select() that waits for
read and/or write events *will* wake up on an EPOLLERR, but
not (for some reason) if it just waits for exceptions.
Strangly the epoll functionality will wakeup on EPOLLERR if
you just wait for an exception, so in this respect select()
and epoll differ.
In the end it doesn't really matter, what matters is that
polling file handles are woken up on device unregistration.
It also improves the code a bit if vdev->fops->poll is NULL:
this didn't check for device unregistration.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Tue, 1 Dec 2020 12:44:44 +0000 (13:44 +0100)]
media: vivid: call v4l2_event_wake_all() on disconnect
When the disconnect error injection control is set, then besides
faking unregistering the device nodes, also call v4l2_event_wake_all()
to ensure any userspace applications will wake up as per a 'normal'
unregister.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Tue, 1 Dec 2020 12:44:43 +0000 (13:44 +0100)]
media: v4l2-dev/event: add v4l2_event_wake_all()
When unregistering a V4L2 device node, make sure any filehandles
that are waiting for an event are woken up.
Add v4l2_event_wake_all() to v4l2-event.c and call it from
video_unregister_device().
Otherwise userspace might never know that a device node was removed.
[hverkuil: checkpatch: replaced 'if (vdev == NULL)' by 'if (!vdev)']
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Alexandre Courbot [Tue, 1 Dec 2020 12:44:42 +0000 (13:44 +0100)]
media: v4l2-mem2mem: always call poll_wait() on queues
do_poll()/do_select() seem to set the _qproc member of poll_table to
NULL the first time they are called on a given table, making subsequent
calls of poll_wait() on that table no-ops. This is a problem for mem2mem
which calls poll_wait() on the V4L2 queues' waitqueues only when a
queue-related event is requested, which may not necessarily be the case
during the first poll.
For instance, a stateful decoder is typically only interested in
EPOLLPRI events when it starts, and will switch to listening to both
EPOLLPRI and EPOLLIN after receiving the initial resolution change event
and configuring the CAPTURE queue. However by the time that switch
happens and v4l2_m2m_poll_for_data() is called for the first time,
poll_wait() has become a no-op and the V4L2 queues waitqueues thus
cannot be registered.
Fix this by moving the registration to v4l2_m2m_poll() and do it whether
or not one of the queue-related events are requested.
Signed-off-by: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Alexandre Courbot [Tue, 1 Dec 2020 12:44:41 +0000 (13:44 +0100)]
media: videobuf2: always call poll_wait() on queues
do_poll()/do_select() seem to set the _qproc member of poll_table to
NULL the first time they are called on a given table, making subsequent
calls of poll_wait() on that table no-ops. This is a problem for vb2
which calls poll_wait() on the V4L2 queues' waitqueues only when a
queue-related event is requested, which may not necessarily be the case
during the first poll.
Fix this by making the call to poll_wait() happen first thing and
unconditionally in vb2_core_poll().
Signed-off-by: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sowjanya Komatineni [Fri, 11 Dec 2020 17:02:42 +0000 (18:02 +0100)]
media: tegra-video: Add custom V4L2 control V4L2_CID_TEGRA_SYNCPT_TIMEOUT_RETRY
This patch adds custom V4L2 control for syncpt timeout retry to continue
capture on error for specified retries count through this control.
This is useful for HDMI-to-CSI bridge debug purposes like for hotplug scenarios
or for ignoring captures till HDMI input is stabilized.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sowjanya Komatineni [Fri, 11 Dec 2020 17:02:41 +0000 (18:02 +0100)]
media: tegra-video: Add support for x8 captures with gang ports
Tegra VI/CSI hardware don't have native 8 lane capture support.
Each CSI port has max 4 lanes only. So for x8 captures, consecutive
ports are ganged up for left half and right half captures on to each
x4 ports with buffer offsets based on source image split width to align
side-by-side.
All ports in gang are configured together during the corresponding
video device node streaming for x8 captures.
x8 capture with gang ports are supported with HDMI-to-CSI bridges
where they split 4K image into left half onto one x4 port and
right half onto second x4 port.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sowjanya Komatineni [Fri, 11 Dec 2020 17:02:40 +0000 (18:02 +0100)]
media: dt-bindings: tegra: Update csi data-lanes to maximum 8 lanes
Tegra VI/CSI hardware don't have native 8 lane CSI RX port.
But x8 capture can be supported by using consecutive x4 ports
simultaneously with HDMI-to-CSI bridges where source image is split
on to two x4 ports.
This patch updates dt-bindings for csi endpoint data-lane property
with maximum of 8 lanes.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sowjanya Komatineni [Fri, 11 Dec 2020 17:02:39 +0000 (18:02 +0100)]
media: v4l2-fwnode: Update V4L2_FWNODE_CSI2_MAX_DATA_LANES to 8
Some CSI2 receivers support 8 data lanes.
So, this patch updates CSI2 maximum data lanes to be 8.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sowjanya Komatineni [Fri, 11 Dec 2020 17:02:38 +0000 (18:02 +0100)]
media: tegra-video: Implement V4L2 device notify callback
Implement V4L2 device notify callback to handle
V4L2_EVENT_SOURCE_CHANGE event from subdevices.
HDMI-to-CSI bridge drivers trigger V4L2_EVENT_SOURCE_CHANGE when
source DV timing changes are detected or when HDMI hotplug happens.
Runtime source parameter changes during active streaming is not
allowed and Tegra video driver calls vb2_queue_error to signal a
fatal error if a notification of this event happens during an active
streaming.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sowjanya Komatineni [Fri, 11 Dec 2020 17:02:37 +0000 (18:02 +0100)]
media: tegra-video: Add support for V4L2_EVENT_SOURCE_CHANGE
Current implementation uses v4l2_ctrl_subscribe_event() and this
does not handle V4L2_EVENT_SOURCE_CHANGE.
So, update driver to handle V4L2_EVENT_SOURCE_CHANGE.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sowjanya Komatineni [Fri, 11 Dec 2020 17:02:36 +0000 (18:02 +0100)]
media: tegra-video: Add support for VIDIOC_LOG_STATUS ioctl
This patch adds support for log_status ioctl.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sowjanya Komatineni [Fri, 11 Dec 2020 17:02:35 +0000 (18:02 +0100)]
media: tegra-video: Add support for EDID ioctl ops
This patch adds support for EDID get and set v4l2 ioctl ops to use
with HDMI to CSI bridges.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sowjanya Komatineni [Fri, 11 Dec 2020 17:02:34 +0000 (18:02 +0100)]
media: tegra-video: Add DV timing support
This patch adds below v4l2 DV timing ioctls to support HDMI-to-CSI
bridges.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sowjanya Komatineni [Fri, 11 Dec 2020 17:02:33 +0000 (18:02 +0100)]
media: tegra-video: Add support for V4L2_PIX_FMT_NV16
NV16 are two-plane versions of YUV422 format.
VI/CSI surface0 registers corresponds to first Y plane and
surface1 registers corresponds to seconds UV plane.
This patch updates image size for NV16 format to include both planes
and programs VI/CSI surface1 registers for UV plane capture.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sowjanya Komatineni [Fri, 11 Dec 2020 17:02:32 +0000 (18:02 +0100)]
media: tegra-video: Fix V4L2 pixel format RGB and YUV
V4L2 pixel format is incorrect for RGB and YUV formats.
This patch fixes it.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sowjanya Komatineni [Fri, 11 Dec 2020 17:02:31 +0000 (18:02 +0100)]
media: tegra-video: Enable VI pixel transform for YUV and RGB formats
VI Pixel transforms converts source pixel data to selected
destination pixel formats in memory and aligns properly.
YUV and RGB formats need this pixel transform to be enabled.
RAW formats use T_R16_I destination pixel format in memory and
does not need pixel transform as they support direct write to
memory.
So, this patch enables pixel transform for YUV and RGB and keeps
it bypass for RAW formats.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sowjanya Komatineni [Fri, 11 Dec 2020 17:02:30 +0000 (18:02 +0100)]
media: tegra-video: Use zero crop settings if subdev has no get_selection
Currently try format implementation doesn't check if subdevice has
get_selection ops implemented and returns -EINVAL on error from
direct v4l2_subdev_call of get_selection.
Selection API's are not mandatory for all V4L2 subdevices.
This patch fixes it by adding v4l2_subdev_has_ops check prior to
calling get_selection ops and continues with try or set format with
zero crop settings for subdevices that don't have get_selection and
returns -EINVAL only for subdevices that has get_selection ops.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:52 +0000 (00:53 +0100)]
media: ti-vpe: cal: Simplify the context API
Rework the context API exposed to cal-video.c to simplify it. The
configuration and enable steps are all grouped in a single
cal_ctx_start() function, and the DMA stop and IRQ disable are similarly
groupd in cal_ctx_stop(). The cal_ctx_wr_dma_addr() function is renamed
to cal_ctx_set_dma_addr() for consistency with the cal_ctx_ prefix of
the start and stop functions.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:51 +0000 (00:53 +0100)]
media: ti-vpe: cal: Store buffer DMA address in dma_addr_t
dma_addr_t is the correct type to store DMA addresses. Replace incorrect
usage of unsigned long and unsigned int.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:50 +0000 (00:53 +0100)]
media: ti-vpe: cal: Set cal_dmaqueue.pending to NULL when no pending buffer
When a pending buffer becomes active, the cal_dmaqueue.active field is
updated, but the pending field keeps the same value until a new buffer
becomes pending. This requires handling the special case of
pending == active in different places. Simplify the code by setting the
pending field to NULL when the pending buffer becomes active. Buffers
are now simply moved from queue to pending and from pending to active.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:49 +0000 (00:53 +0100)]
media: ti-vpe: cal: Group all DMA queue fields in struct cal_dmaqueue
The cal_dmaqueue structure only contains the list of queued buffers.
Move the other fields that are logically related to the DMA queue
(current and next buffer points, state, wait queue and lock) from
cal_ctx to cal_dmaqueue.
Take this as an opportunity to document the fields usage and to give
them more appropriate names. The 'active' field stored the list of all
queued buffers, not the active buffers, so rename it to 'queue'. The
'cur_frm' and 'next_frm' are respectively renamed to 'active' and
'pending' to better explain their purpose. The 'dma_state' and
'dma_wait' fields are stripped of their 'dma_' prefix as they're now
part of cal_dmaqueue. Finally, 'slock' is renamed to 'lock'.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:48 +0000 (00:53 +0100)]
media: ti-vpe: cal: Use list_first_entry()
Use the list_first_entry() macro where appropriate to replace manual
usage of list_entry(head.next).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:47 +0000 (00:53 +0100)]
media: ti-vpe: cal: Remove DMA queue empty check at start streaming time
The vb2 queue ensures that the start streaming operation will only be
called with a minimal number of buffers queued to the driver. There's
thus no need to manually check if the DMA queue is empty. Remove the
check.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:46 +0000 (00:53 +0100)]
media: ti-vpe: cal: Drop unneeded check in cal_calc_format_size()
The cal_calc_format_size() function checks that the passed fmtinfo
argument is not NULL. All callers ensure that the pointer is valid. Drop
the check.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:45 +0000 (00:53 +0100)]
media: ti-vpe: cal: Drop V4L2_CAP_READWRITE
The V4L2 read/write API is inefficient and makes little sense for
devices that handle frame-based formats. Applications shouldn't use it,
drop its support from the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:44 +0000 (00:53 +0100)]
media: ti-vpe: cal: Share buffer release code between start and stop
The cal_start_streaming() and cal_stop_streaming() functions duplicate
the same buffer release logic. split it to a separate function to share
the code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:43 +0000 (00:53 +0100)]
media: ti-vpe: cal: Use spin_lock_irq() when starting or stopping stream
The cal_start_streaming() and cal_stop_streaming() functions are called
with interrupts enabled. spin_lock_irq() can thus be used instead of
spin_lock_irqsave().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:42 +0000 (00:53 +0100)]
media: ti-vpe: cal: Stop write DMA without disabling PPI
When stopping the stream, the driver needs to ensure that ongoing DMA
completes and that no new DMA is started. It does so using a feature of
the PPI that can be stopped on a frame boundary. The downside of this
mechanism is that the DMA can't be stopped independently of the source,
which prevents usage of multiple contexts for the same source (to handle
CSI-2 virtual channels or data types).
Rework the stream stop mechanism to stop the write DMA without disabling
the PPI first. The new mechanism relies on the combination of a state
machine in the driver and shadowing of the CAL_WR_DMA_CTRL_j.MODE field
in the hardware. When a stop is requested, the DMA start interrupt
handler will request the hardware to stop at the end of the current
frame by disabling the write DMA context in the shadowed register, and
flag that a stop is in progress. The next DMA end interrupt will then
report that the stop is complete.
This makes it possible to stop the PPI after stopping the DMA, and fold
the cal_camerarx_ppi_disable() call into cal_camerarx_stop().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:41 +0000 (00:53 +0100)]
media: ti-vpe: cal: Fold PPI enable in CAMERARX .s_stream()
To further decouple the context and CAMERARX components, move the call
to cal_camerarx_ppi_enable() from cal_start_streaming() to the CAMERARX
.s_stream() operation. The DMA destination address has to be set before
starting the CAMERARX, which is desirable anyway.
cal_camerarx_ppi_disable() will be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:40 +0000 (00:53 +0100)]
media: ti-vpe: cal: Refactor interrupt enable/disable
Interrupts are enabled and disabled by the cal_camerarx_enable_irqs()
and cal_camerarx_disable_irqs(). Despite their name, they deal with all
interrupts, not just the CAMERARX interrupts, and they hardcode the
assumption that the context index is identical to the CAMERARX index.
Split the context-related interrupt management to two new functions,
cal_ctx_enable_irqs() and cal_ctx_disable_irqs(), called from the
cal_start_streaming() and cal_stop_streaming() functions. The explicit
calls to cal_camerarx_enable_irqs() and cal_camerarx_disable_irqs() are
folded with the CAMERARX .s_stream() operation to simplify the CAMERARX
API.
Enabling the OCPO error interrupt is moved to the PM runtime resume
operation, as it's global to the device, not related to a CAMERARX or
context. The VC IRQ enable and disable are removed as they're not used,
the parent interrupt bit (CAL_HL_IRQ_VC_MASK) never being set.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:39 +0000 (00:53 +0100)]
media: ti-vpe: cal: Rename struct cal_fmt to cal_format_info
The cal_fmt structure stores information about a format. Its name is
ambiguous, as it could be understood as storing a format. Furthermore,
instances of the structure are called 'fmt' through the code, which
leads to confusion with the 'format' variables. Rename the structure to
cal_format_info, and the corresponding 'fmt' variables to 'fmtinfo'.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:38 +0000 (00:53 +0100)]
media: ti-vpe: cal: Don't pass format to cal_ctx_wr_dma_config()
The cal_ctx_wr_dma_config() function has access to the context, there's
no need to give it format-related values retrieved from the context.
Access the values internally, and reword internal comments. The comment
regarding the CAL_WR_DMA_OFST register not being well understood is
dropped, as the datasheet explicitly documents it as "Offset between two
consecutive line starts".
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:37 +0000 (00:53 +0100)]
media: ti-vpe: cal: Use CAMERARX subdev s_stream op in video device code
Replace calls to cal_camerarx_start() and cal_camerarx_stop() with usage
of the .s_stream() subdev operation. This requires calling the
.set_fmt() operation as the CAMERARX now relies on the format
information set through the subdev API instead of receiving it in the
cal_camerarx_start() function.
This change prepare for exposing the CAMERARX subdev operations to
userspace by using the same API within the kernel.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:36 +0000 (00:53 +0100)]
media: ti-vpe: cal: Implement subdev ops for CAMERARX
Implement subdev operations for the CAMERARX. They will be used to
replace calls to custom CAMERARX functions in the V4L2 video device
code, and will be exposed to userspace.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:35 +0000 (00:53 +0100)]
media: ti-vpe: cal: Iterate over correct number of CAMERARX instances
When performing operations on all CAMERARX instances, code usually
iterates over all cal->phy[] entries and skips the NULL pointers. The
number of available CAMERARX instances is however available through
cal->data->num_csi2_phy. Use it instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:34 +0000 (00:53 +0100)]
media: ti-vpe: cal: Replace hardcoded BIT() value with macro
Replace the hardcoded BIT(3) value with CAL_CSI2_PPI_CTRL_FRAME_MASK to
increase readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:33 +0000 (00:53 +0100)]
media: ti-vpe: cal: Rename MAX_(WIDTH|HEIGHT)_* macros with CAL_ prefix
The MAX_WIDTH_BYTES and MAX_HEIGHT_LINES macros have a generic name that
is prone to namespace clashes. Rename them with a CAL_ prefix. While at
it, expand their documentation and add CAL_MIN_(WIDTH|HEIGHT)_* macros
that will be used to implement CAMERARX subdev operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:32 +0000 (00:53 +0100)]
media: ti-vpe: cal: Move format handling to cal.c and expose helpers
The cal_formats array contain the description of all formats supported
by the hardware. It's currently used by the V4L2 video device operations
only, but will be needed by the CAMERARX subdev code too. Move it from
cal-video.c to cal.c and add helper functions to access it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:31 +0000 (00:53 +0100)]
media: ti-vpe: cal: Drop cal_ctx m_fmt field
The struct cal_ctx m_fmt field stores the media bus format for the
context input. Only the format 'field' field is used, store it in the
video format instead, and drop m_fmt.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 6 Dec 2020 23:53:30 +0000 (00:53 +0100)]
media: ti-vpe: cal: Create subdev for CAMERARX
Create and register V4L2 subdevs for the CAMERARX instances, and link
them in the media graph to the sensors and video nodes. The subdev API
is not exposed to userspace at this point, and no subdev operation is
implemented, but the media controller graph is visible to applications.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Linus Torvalds [Sun, 27 Dec 2020 23:30:22 +0000 (15:30 -0800)]
Linux 5.11-rc1
Linus Torvalds [Sun, 27 Dec 2020 18:56:33 +0000 (10:56 -0800)]
proc mountinfo: make splice available again
Since commit
36e2c7421f02 ("fs: don't allow splice read/write without
explicit ops") we've required that file operation structures explicitly
enable splice support, rather than falling back to the default handlers.
Most /proc files use the indirect 'struct proc_ops' to describe their
file operations, and were fixed up to support splice earlier in commits
40be821d627c..
b24c30c67863, but the mountinfo files interact with the
VFS directly using their own 'struct file_operations' and got missed as
a result.
This adds the necessary support for splice to work for /proc/*/mountinfo
and friends.
Reported-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Reported-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209971
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 27 Dec 2020 17:22:55 +0000 (09:22 -0800)]
Merge tag 'ntb-5.11' of git://github.com/jonmason/ntb
Pull NTB fixes from Jon Mason:
"Bug fix for IDT NTB and Intel NTB LTR management support"
* tag 'ntb-5.11' of git://github.com/jonmason/ntb:
ntb: intel: add Intel NTB LTR vendor support for gen4 NTB
ntb: idt: fix error check in ntb_hw_idt.c
Linus Torvalds [Sun, 27 Dec 2020 17:14:32 +0000 (09:14 -0800)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix a number of autobuild failures due to missing Kconfig
dependencies"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: qat - add CRYPTO_AES to Kconfig dependencies
crypto: keembay - Add dependency on HAS_IOMEM
crypto: keembay - CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 should depend on ARCH_KEEMBAY
Linus Torvalds [Sun, 27 Dec 2020 17:08:23 +0000 (09:08 -0800)]
Merge tag 'objtool-urgent-2020-12-27' of git://git./linux/kernel/git/tip/tip
Pull objtool fix from Ingo Molnar:
"Fix a segfault that occurs when built with Clang"
* tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix seg fault with Clang non-section symbols
Linus Torvalds [Sun, 27 Dec 2020 17:06:10 +0000 (09:06 -0800)]
Merge tag 'locking-urgent-2020-12-27' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"Misc fixes/updates:
- Fix static keys usage in module __init sections
- Add separate MAINTAINERS entry for static branches/calls
- Fix lockdep splat with CONFIG_PREEMPTIRQ_EVENTS=y tracing"
* tag 'locking-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
softirq: Avoid bad tracing / lockdep interaction
jump_label/static_call: Add MAINTAINERS
jump_label: Fix usage in module __init
Linus Torvalds [Sun, 27 Dec 2020 17:03:41 +0000 (09:03 -0800)]
Merge tag 'timers-urgent-2020-12-27' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Update/fix two CPU sanity checks in the hotplug and the boot code, and
fix a typo in the Kconfig help text.
[ Context: the first two commits are the result of an ongoing
annotation+review work of (intentional) tick_do_timer_cpu() data
races reported by KCSAN, but the annotations aren't fully cooked
yet ]"
* tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix spelling mistake in Kconfig "fullfill" -> "fulfill"
tick/sched: Remove bogus boot "safety" check
tick: Remove pointless cpu valid check in hotplug code
Linus Torvalds [Sun, 27 Dec 2020 17:00:47 +0000 (09:00 -0800)]
Merge tag 'sched-urgent-2020-12-27' of git://git./linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix a context switch performance regression"
* tag 'sched-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Optimize finish_lock_switch()
Linus Torvalds [Sat, 26 Dec 2020 17:19:49 +0000 (09:19 -0800)]
mfd: ab8500-debugfs: Remove extraneous seq_putc
Commit
c9a3c4e637ac ("mfd: ab8500-debugfs: Remove extraneous curly
brace") removed a left-over curly brace that caused build failures, but
Joe Perches points out that the subsequent 'seq_putc()' should also be
removed, because the commit that caused all these problems already added
the final '\n' to the seq_printf() above it.
Reported-by: Joe Perches <joe@perches.com>
Fixes:
886c8121659d ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 26 Dec 2020 04:17:40 +0000 (20:17 -0800)]
Merge tag 'pci-v5.11-fixes-1' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix a tegra enumeration regression (Rob Herring)
- Fix a designware-host check that warned on *success*, not failure
(Alexander Lobakin)
* tag 'pci-v5.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: dwc: Fix inverted condition of DMA mask setup warning
PCI: tegra: Fix host link initialization
Nathan Chancellor [Sat, 26 Dec 2020 01:35:49 +0000 (18:35 -0700)]
mfd: ab8500-debugfs: Remove extraneous curly brace
Clang errors:
drivers/mfd/ab8500-debugfs.c:1526:2: error: non-void function does not return a value [-Werror,-Wreturn-type]
}
^
drivers/mfd/ab8500-debugfs.c:1528:2: error: expected identifier or '('
return 0;
^
drivers/mfd/ab8500-debugfs.c:1529:1: error: extraneous closing brace ('}')
}
^
3 errors generated.
The cleanup in ab8500_interrupts_show left a curly brace around, remove
it to fix the error.
Fixes:
886c8121659d ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexander Lobakin [Tue, 22 Dec 2020 15:07:43 +0000 (15:07 +0000)]
PCI: dwc: Fix inverted condition of DMA mask setup warning
Commit
660c486590aa ("PCI: dwc: Set 32-bit DMA mask for MSI target address
allocation") added dma_mask_set() call to explicitly set 32-bit DMA mask
for MSI message mapping, but for now it throws a warning on ret == 0, while
dma_set_mask() returns 0 in case of success.
Fix this by inverting the condition.
[bhelgaas: join string to make it greppable]
Fixes:
660c486590aa ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation")
Link: https://lore.kernel.org/r/20201222150708.67983-1-alobakin@pm.me
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Rob Herring [Fri, 18 Dec 2020 14:39:05 +0000 (08:39 -0600)]
PCI: tegra: Fix host link initialization
Commit
b9ac0f9dc8ea ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common
code") broke enumeration of downstream devices on Tegra:
In non-working case (next-
20201211):
0001:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad2 (rev a1)
0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13)
0005:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad0 (rev a1)
In working case (v5.10-rc7):
0001:00:00.0 PCI bridge: Molex Incorporated Device 1ad2 (rev a1)
0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13)
0005:00:00.0 PCI bridge: Molex Incorporated Device 1ad0 (rev a1)
0005:01:00.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab)
0005:02:02.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab)
0005:03:00.0 USB controller: PLX Technology, Inc. Device 3380 (rev ab)
The problem seems to be dw_pcie_setup_rc() is now called twice before and
after the link up handling. The fix is to move Tegra's link up handling to
.start_link() function like other DWC drivers. Tegra is a bit more
complicated than others as it re-inits the whole DWC controller to retry
the link. With this, the initialization ordering is restored to match the
prior sequence.
Fixes:
b9ac0f9dc8ea ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code")
Link: https://lore.kernel.org/r/20201218143905.1614098-1-robh@kernel.org
Reported-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Vidya Sagar <vidyas@nvidia.com>
Linus Torvalds [Fri, 25 Dec 2020 23:41:13 +0000 (15:41 -0800)]
drm/amd/display: avoid uninitialized variable warning
clang (quite rightly) complains fairly loudly about the newly added
mpc1_get_mpc_out_mux() function returning an uninitialized value if the
'opp_id' checks don't pass.
This may not happen in practice, but the code really shouldn't return
garbage if the sanity checks don't pass.
So just initialize 'val' to zero to avoid the issue.
Fixes:
110b055b2827 ("drm/amd/display: add getter routine to retrieve mpcc mux")
Cc: Josip Pavic <Josip.Pavic@amd.com>
Cc: Bindu Ramamurthy <bindu.r@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 25 Dec 2020 19:07:34 +0000 (11:07 -0800)]
Merge tag 'perf-tools-2020-12-24' of git://git./linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Refactor 'perf stat' per CPU/socket/die/thread aggregation fixing use
cases in ARM machines.
- Fix memory leak when synthesizing SDT probes in 'perf probe'.
- Update kernel header copies related to KVM, epol_pwait. msr-index and
powerpc and s390 syscall tables.
* tag 'perf-tools-2020-12-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (24 commits)
perf probe: Fix memory leak when synthesizing SDT probes
perf stat aggregation: Add separate thread member
perf stat aggregation: Add separate core member
perf stat aggregation: Add separate die member
perf stat aggregation: Add separate socket member
perf stat aggregation: Add separate node member
perf stat aggregation: Start using cpu_aggr_id in map
perf cpumap: Drop in cpu_aggr_map struct
perf cpumap: Add new map type for aggregation
perf stat: Replace aggregation ID with a struct
perf cpumap: Add new struct for cpu aggregation
perf cpumap: Use existing allocator to avoid using malloc
perf tests: Improve topology test to check all aggregation types
perf tools: Update s390's syscall.tbl copy from the kernel sources
perf tools: Update powerpc's syscall.tbl copy from the kernel sources
perf s390: Move syscall.tbl check into check-headers.sh
perf powerpc: Move syscall.tbl check to check-headers.sh
tools headers UAPI: Synch KVM's svm.h header with the kernel
tools kvm headers: Update KVM headers from the kernel sources
tools headers UAPI: Sync KVM's vmx.h header with the kernel sources
...
Linus Torvalds [Fri, 25 Dec 2020 19:05:32 +0000 (11:05 -0800)]
Merge branch 'for-5.11' of git://git./linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall.
* 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
scripts: coccicheck: Correct usage of make coccicheck
coccinelle: update expiring email addresses
coccinnelle: Remove ptr_ret script
kbuild: do not use scripts/ld-version.sh for checking spatch version
remove boolinit.cocci
Michael Ellerman [Fri, 25 Dec 2020 11:30:58 +0000 (22:30 +1100)]
genirq: Fix export of irq_to_desc() for powerpc KVM
Commit
64a1b95bb9fe ("genirq: Restrict export of irq_to_desc()") removed
the export of irq_to_desc() unless powerpc KVM is being built, because
there is still a use of irq_to_desc() in modular code there.
However it used:
#ifdef CONFIG_KVM_BOOK3S_64_HV
Which doesn't work when that symbol is =m, leading to a build failure:
ERROR: modpost: "irq_to_desc" [arch/powerpc/kvm/kvm-hv.ko] undefined!
Fix it by checking for the definedness of the correct symbol which is
CONFIG_KVM_BOOK3S_64_HV_MODULE.
Fixes:
64a1b95bb9fe ("genirq: Restrict export of irq_to_desc()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 25 Dec 2020 18:54:29 +0000 (10:54 -0800)]
Merge branch 'work.misc' of git://git./linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted patches from previous cycle(s)..."
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix hostfs_open() use of ->f_path.dentry
Make sure that make_create_in_sticky() never sees uninitialized value of dir_mode
fs: Kill DCACHE_DONTCACHE dentry even if DCACHE_REFERENCED is set
fs: Handle I_DONTCACHE in iput_final() instead of generic_drop_inode()
fs/namespace.c: WARN if mnt_count has become negative
Linus Torvalds [Thu, 24 Dec 2020 22:20:33 +0000 (14:20 -0800)]
Merge tag 'docs-5.11-2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A small set of late-arriving, small documentation fixes"
* tag 'docs-5.11-2' of git://git.lwn.net/linux:
docs: admin-guide: Fix default value of max_map_count in sysctl/vm.rst
Documentation/submitting-patches: Document the SoB chain
Documentation: process: Correct numbering
docs: submitting-patches: Trivial - fix grammatical error
Linus Torvalds [Thu, 24 Dec 2020 22:16:02 +0000 (14:16 -0800)]
Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Various bug fixes and cleanups for ext4; no new features this cycle"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (29 commits)
ext4: remove unnecessary wbc parameter from ext4_bio_write_page
ext4: avoid s_mb_prefetch to be zero in individual scenarios
ext4: defer saving error info from atomic context
ext4: simplify ext4 error translation
ext4: move functions in super.c
ext4: make ext4_abort() use __ext4_error()
ext4: standardize error message in ext4_protect_reserved_inode()
ext4: remove redundant sb checksum recomputation
ext4: don't remount read-only with errors=continue on reboot
ext4: fix deadlock with fs freezing and EA inodes
jbd2: add a helper to find out number of fast commit blocks
ext4: make fast_commit.h byte identical with e2fsprogs/fast_commit.h
ext4: fix fall-through warnings for Clang
ext4: add docs about fast commit idempotence
ext4: remove the unused EXT4_CURRENT_REV macro
ext4: fix an IS_ERR() vs NULL check
ext4: check for invalid block size early when mounting a file system
ext4: fix a memory leak of ext4_free_data
ext4: delete nonsensical (commented-out) code inside ext4_xattr_block_set()
ext4: update ext4_data_block_valid related comments
...
Linus Torvalds [Thu, 24 Dec 2020 22:08:43 +0000 (14:08 -0800)]
Merge tag 'Smack-for-5.11-io_uring-fix' of git://github.com/cschaufler/smack-next
Pull smack fix from Casey Schaufler:
"Provide a fix for the incorrect handling of privilege in the face of
io_uring's use of kernel threads. That invalidated an long standing
assumption regarding the privilege of kernel threads.
The fix is simple and safe. It was provided by Jens Axboe and has been
tested"
* tag 'Smack-for-5.11-io_uring-fix' of git://github.com/cschaufler/smack-next:
Smack: Handle io_uring kernel thread privileges
Linus Torvalds [Thu, 24 Dec 2020 22:05:05 +0000 (14:05 -0800)]
Merge tag 'riscv-for-linus-5.11-rc1' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt
"Avoid trying to initialize memory regions outside the usable range"
* tag 'riscv-for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix usage of memblock_enforce_memory_limit
Linus Torvalds [Thu, 24 Dec 2020 22:02:00 +0000 (14:02 -0800)]
Merge tag 'powerpc-5.11-2' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Four commits fixing various things in the new C VDSO code
- One fix for a 32-bit VMAP stack bug
- Two minor build fixes
Thanks to Cédric Le Goater, Christophe Leroy, and Will Springer.
* tag 'powerpc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Fix vmap stack - Properly set r1 before activating MMU on syscall too
powerpc/vdso: Fix DOTSYM for 32-bit LE VDSO
powerpc/vdso: Don't pass 64-bit ABI cflags to 32-bit VDSO
powerpc/vdso: Block R_PPC_REL24 relocations
powerpc/smp: Add __init to init_big_cores()
powerpc/time: Force inlining of get_tb()
powerpc/boot: Fix build of dts/fsl
Linus Torvalds [Thu, 24 Dec 2020 21:50:23 +0000 (13:50 -0800)]
Merge tag 'irq-core-2020-12-23' of git://git./linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"This is the second attempt after the first one failed miserably and
got zapped to unblock the rest of the interrupt related patches.
A treewide cleanup of interrupt descriptor (ab)use with all sorts of
racy accesses, inefficient and disfunctional code. The goal is to
remove the export of irq_to_desc() to prevent these things from
creeping up again"
* tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
genirq: Restrict export of irq_to_desc()
xen/events: Implement irq distribution
xen/events: Reduce irq_info:: Spurious_cnt storage size
xen/events: Only force affinity mask for percpu interrupts
xen/events: Use immediate affinity setting
xen/events: Remove disfunct affinity spreading
xen/events: Remove unused bind_evtchn_to_irq_lateeoi()
net/mlx5: Use effective interrupt affinity
net/mlx5: Replace irq_to_desc() abuse
net/mlx4: Use effective interrupt affinity
net/mlx4: Replace irq_to_desc() abuse
PCI: mobiveil: Use irq_data_get_irq_chip_data()
PCI: xilinx-nwl: Use irq_data_get_irq_chip_data()
NTB/msi: Use irq_has_action()
mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc
pinctrl: nomadik: Use irq_has_action()
drm/i915/pmu: Replace open coded kstat_irqs() copy
drm/i915/lpe_audio: Remove pointless irq_to_desc() usage
s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt()
parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts()
...
Linus Torvalds [Thu, 24 Dec 2020 20:40:07 +0000 (12:40 -0800)]
Merge tag 'efi_updates_for_v5.11' of git://git./linux/kernel/git/tip/tip
Pull EFI updates from Borislav Petkov:
"These got delayed due to a last minute ia64 build issue which got
fixed in the meantime.
EFI updates collected by Ard Biesheuvel:
- Don't move BSS section around pointlessly in the x86 decompressor
- Refactor helper for discovering the EFI secure boot mode
- Wire up EFI secure boot to IMA for arm64
- Some fixes for the capsule loader
- Expose the RT_PROP table via the EFI test module
- Relax DT and kernel placement restrictions on ARM
with a few followup fixes:
- fix the build breakage on IA64 caused by recent capsule loader
changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM"
* tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
efi: ia64: disable the capsule loader
efi: stub: get rid of efi_get_max_fdt_addr()
efi/efi_test: read RuntimeServicesSupported
efi: arm: reduce minimum alignment of uncompressed kernel
efi: capsule: clean scatter-gather entries from the D-cache
efi: capsule: use atomic kmap for transient sglist mappings
efi: x86/xen: switch to efi_get_secureboot_mode helper
arm64/ima: add ima_arch support
ima: generalize x86/EFI arch glue for other EFI architectures
efi: generalize efi_get_secureboot
efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes
efi/x86: Only copy the compressed kernel image in efi_relocate_kernel()
efi/libstub/x86: simplify efi_is_native()
Linus Torvalds [Thu, 24 Dec 2020 20:35:00 +0000 (12:35 -0800)]
Merge tag 'io_uring-5.11-2020-12-23' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"All straight fixes, or a prep patch for a fix, either bound for stable
or fixing issues from this merge window. In particular:
- Fix new shutdown op not breaking links on failure
- Hold mm->mmap_sem for mm->locked_vm manipulation
- Various cancelation fixes (me, Pavel)
- Fix error path potential double ctx free (Pavel)
- IOPOLL fixes (Xiaoguang)"
* tag 'io_uring-5.11-2020-12-23' of git://git.kernel.dk/linux-block:
io_uring: hold uring_lock while completing failed polled io in io_wq_submit_work()
io_uring: fix double io_uring free
io_uring: fix ignoring xa_store errors
io_uring: end waiting before task cancel attempts
io_uring: always progress task_work on task cancel
io-wq: kill now unused io_wq_cancel_all()
io_uring: make ctx cancel on exit targeted to actual ctx
io_uring: fix 0-iov read buffer select
io_uring: close a small race gap for files cancel
io_uring: fix io_wqe->work_list corruption
io_uring: limit {io|sq}poll submit locking scope
io_uring: inline io_cqring_mark_overflow()
io_uring: consolidate CQ nr events calculation
io_uring: remove racy overflow list fast checks
io_uring: cancel reqs shouldn't kill overflow list
io_uring: hold mmap_sem for mm->locked_vm manipulation
io_uring: break links on shutdown failure
Linus Torvalds [Thu, 24 Dec 2020 20:28:35 +0000 (12:28 -0800)]
Merge tag 'block-5.11-2020-12-23' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few stragglers in here, but mostly just straight fixes. In
particular:
- Set of rnbd fixes for issues around changes for the merge window
(Gioh, Jack, Md Haris Iqbal)
- iocost tracepoint addition (Baolin)
- Copyright/maintainers update (Christoph)
- Remove old blk-mq fast path CPU warning (Daniel)
- loop max_part fix (Josh)
- Remote IPI threaded IRQ fix (Sebastian)
- dasd stable fixes (Stefan)
- bcache merge window fixup and style fixup (Yi, Zheng)"
* tag 'block-5.11-2020-12-23' of git://git.kernel.dk/linux-block:
md/bcache: convert comma to semicolon
bcache:remove a superfluous check in register_bcache
block: update some copyrights
block: remove a pointless self-reference in block_dev.c
MAINTAINERS: add fs/block_dev.c to the block section
blk-mq: Don't complete on a remote CPU in force threaded mode
s390/dasd: fix list corruption of lcu list
s390/dasd: fix list corruption of pavgroup group list
s390/dasd: prevent inconsistent LCU device data
s390/dasd: fix hanging device offline processing
blk-iocost: Add iocg idle state tracepoint
nbd: Respect max_part for all partition scans
block/rnbd-clt: Does not request pdu to rtrs-clt
block/rnbd-clt: Dynamically allocate sglist for rnbd_iu
block/rnbd: Set write-back cache and fua same to the target device
block/rnbd: Fix typos
block/rnbd-srv: Protect dev session sysfs removal
block/rnbd-clt: Fix possible memleak
block/rnbd-clt: Get rid of warning regarding size argument in strlcpy
blk-mq: Remove 'running from the wrong CPU' warning
Linus Torvalds [Thu, 24 Dec 2020 20:18:11 +0000 (12:18 -0800)]
Merge tag 'libnvdimm-for-5.11' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Twas the day before Christmas and the only thing stirring in libnvdimm
/ device-dax land is a pile of miscellaneous fixups and cleanups.
The bulk of it has appeared in -next save the last two patches to
device-dax that have passed my build and unit tests.
- Fix a long standing block-window-namespace issue surfaced by the
ndctl change to attempt to preserve the kernel device name over
a 'reconfigure'
- Fix a few error path memory leaks in nfit and device-dax
- Silence a smatch warning in the ioctl path
- Miscellaneous cleanups"
* tag 'libnvdimm-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: Avoid an unnecessary check in alloc_dev_dax_range()
device-dax: Fix range release
device-dax: delete a redundancy check in dev_dax_validate_align()
libnvdimm/label: Return -ENXIO for no slot in __blk_label_update
device-dax/core: Fix memory leak when rmmod dax.ko
device-dax/pmem: Convert comma to semicolon
libnvdimm: Cleanup include of badblocks.h
ACPI: NFIT: Fix input validation of bus-family
libnvdimm/namespace: Fix reaping of invalidated block-window-namespace labels
ACPI/nfit: avoid accessing uninitialized memory in acpi_nfit_ctl()
Linus Torvalds [Thu, 24 Dec 2020 20:14:29 +0000 (12:14 -0800)]
Merge tag 'drm-next-2020-12-24' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Xmas eve pull request present.
Just some fixes that trickled in this past week: Mostly amdgpu fixes,
with a dma-buf/mips build fix and some misc komeda fixes.
dma-buf:
- fix build on mips
komeda:
- fix commit tail operation order
- NULL pointer fix
- out of bounds access fix
ttm:
- remove an unused function
amdgpu:
- Vangogh SMU fixes
- Arcturus gfx9 fixes
- Misc display fixes
- Sienna Cichlid SMU update
- Fix S3 display memory leak
- Fix regression caused by DP sub-connector support
amdkfd:
- Properly require pcie atomics for gfx10"
* tag 'drm-next-2020-12-24' of git://anongit.freedesktop.org/drm/drm: (31 commits)
drm/amd/display: Fix memory leaks in S3 resume
drm/amdgpu: Fix a copy-pasta comment
drm/amdgpu: only set DP subconnector type on DP and eDP connectors
drm/amd/pm: bump Sienna Cichlid smu_driver_if version to match latest pmfw
drm/amd/display: add getter routine to retrieve mpcc mux
drm/amd/display: always program DPPDTO unless not safe to lower
drm/amd/display: [FW Promotion] Release 0.0.47
drm/amd/display: updated wm table for Renoir
drm/amd/display: Acquire DSC during split stream for ODM only if top_pipe
drm/amd/display: Multi-display underflow observed
drm/amd/display: Remove unnecessary NULL check
drm/amd/display: Update RN/VGH active display count workaround
drm/amd/display: change SMU repsonse timeout to 2s.
drm/amd/display: gradually ramp ABM intensity
drm/amd/display: To modify the condition in indicating branch device
drm/amd/display: Modify the hdcp device count check condition
drm/amd/display: Interfaces for hubp blank and soft reset
drm/amd/display: handler not correctly checked at remove_irq_handler
drm/amdgpu: check gfx pipe availability before toggling its interrupts
drm/amdgpu: remove unnecessary asic type check
...
Linus Torvalds [Thu, 24 Dec 2020 20:09:48 +0000 (12:09 -0800)]
Merge tag 'devicetree-fixes-for-5.11-1' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Correct the JSON pointer syntax in binding schemas
- Drop unnecessary *-supply schema constraints
- Drop redundant maxItems/items on array schemas
- Fix various yamllint warnings
- Fix various missing 'additionalProperties' properties
* tag 'devicetree-fixes-for-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Drop redundant maxItems/items
dt-bindings: net: qcom,ipa: Drop unnecessary type ref on 'memory-region'
dt-bindings: Drop unnecessary *-supply schemas properties
dt-bindings/display: abt,y030xx067a: Fix binding
dt-bindings: clock: imx8qxp-lpcg: eliminate yamllint warnings
dt-bindings: display: eliminate yamllint warnings
dt-bindings: media: nokia,smia: eliminate yamllint warnings
dt-bindings: devapc: add the required property 'additionalProperties'
dt-bindings: soc: add the required property 'additionalProperties'
dt-bindings: serial: add the required property 'additionalProperties'
dt-bindings: xlnx,vcu-settings: fix dt_binding_check warnings
media: dt-bindings: coda: Add missing 'additionalProperties'
dt-bindings: Fix JSON pointers
Linus Torvalds [Thu, 24 Dec 2020 20:06:46 +0000 (12:06 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- vdpa sim refactoring
- virtio mem: Big Block Mode support
- misc cleanus, fixes
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (61 commits)
vdpa: Use simpler version of ida allocation
vdpa: Add missing comment for virtqueue count
uapi: virtio_ids: add missing device type IDs from OASIS spec
uapi: virtio_ids.h: consistent indentions
vhost scsi: fix error return code in vhost_scsi_set_endpoint()
virtio_ring: Fix two use after free bugs
virtio_net: Fix error code in probe()
virtio_ring: Cut and paste bugs in vring_create_virtqueue_packed()
tools/virtio: add barrier for aarch64
tools/virtio: add krealloc_array
tools/virtio: include asm/bug.h
vdpa/mlx5: Use write memory barrier after updating CQ index
vdpa: split vdpasim to core and net modules
vdpa_sim: split vdpasim_virtqueue's iov field in out_iov and in_iov
vdpa_sim: make vdpasim->buffer size configurable
vdpa_sim: use kvmalloc to allocate vdpasim->buffer
vdpa_sim: set vringh notify callback
vdpa_sim: add set_config callback in vdpasim_dev_attr
vdpa_sim: add get_config callback in vdpasim_dev_attr
vdpa_sim: make 'config' generic and usable for any device type
...