OSDN Git Service
Marcel Holtmann [Wed, 4 Sep 2019 18:13:08 +0000 (20:13 +0200)]
Revert "Bluetooth: validate BLE connection interval updates"
This reverts commit
c49a8682fc5d298d44e8d911f4fa14690ea9485e.
There are devices which require low connection intervals for usable operation
including keyboards and mice. Forcing a static connection interval for
these types of devices has an impact in latency and causes a regression.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Navid Emamdoost [Sat, 31 Aug 2019 19:23:40 +0000 (14:23 -0500)]
Bluetooth: bpa10x: change return value
When returning from bpa10x_send_frame, it is necessary to propagate any
potential errno returned from usb_submit_urb.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Harish Bandi [Wed, 4 Sep 2019 04:34:16 +0000 (10:04 +0530)]
Bluetooth: hci_qca: disable irqs when spinlock is acquired
Looks like Deadlock is observed in hci_qca while performing
stress and stability tests. Since same lock is getting
acquired from qca_wq_awake_rx and hci_ibs_tx_idle_timeout
seeing spinlock recursion, irqs should be disable while
acquiring the spinlock always.
Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Jian-Hong Pan [Tue, 3 Sep 2019 09:10:42 +0000 (17:10 +0800)]
Bluetooth: btrtl: Additional Realtek 8822CE Bluetooth devices
The ASUS X412FA laptop contains a Realtek RTL8822CE device with an
associated BT chip using a USB ID of 04ca:4005. This ID is added to the
driver.
The /sys/kernel/debug/usb/devices portion for this device is:
T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=4005 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=
00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=204707
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Mario Limonciello [Mon, 19 Aug 2019 17:04:08 +0000 (12:04 -0500)]
Revert "Bluetooth: btusb: driver to enable the usb-wakeup feature"
This reverts commit
a0085f2510e8976614ad8f766b209448b385492f.
This commit has caused regressions in notebooks that support suspend
to idle such as the XPS 9360, XPS 9370 and XPS 9380.
These notebooks will wakeup from suspend to idle from an unsolicited
advertising packet from an unpaired BLE device.
In a bug report it was sugggested that this is caused by a generic
lack of LE privacy support. Revert this commit until that behavior
can be avoided by the kernel.
Fixes:
a0085f2510e8 ("Bluetooth: btusb: driver to enable the usb-wakeup feature")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=200039
Link: https://marc.info/?l=linux-bluetooth&m=156441081612627&w=2
Link: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/750073/
CC: Bastien Nocera <hadess@hadess.net>
CC: Christian Kellner <ckellner@redhat.com>
CC: Sukumar Ghorai <sukumar.ghorai@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
David S. Miller [Thu, 29 Aug 2019 23:44:15 +0000 (16:44 -0700)]
Merge tag 'mac80211-for-davem-2019-08-29' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
We have
* one fix for a driver as I'm covering for Kalle while he's on vacation
* two fixes for eapol-over-nl80211 work
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Denis Kenzior [Tue, 27 Aug 2019 22:41:20 +0000 (17:41 -0500)]
mac80211: Correctly set noencrypt for PAE frames
The noencrypt flag was intended to be set if the "frame was received
unencrypted" according to include/uapi/linux/nl80211.h. However, the
current behavior is opposite of this.
Cc: stable@vger.kernel.org
Fixes:
018f6fbf540d ("mac80211: Send control port frames over nl80211")
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Link: https://lore.kernel.org/r/20190827224120.14545-3-denkenz@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Denis Kenzior [Tue, 27 Aug 2019 22:41:19 +0000 (17:41 -0500)]
mac80211: Don't memset RXCB prior to PAE intercept
In ieee80211_deliver_skb_to_local_stack intercepts EAPoL frames if
mac80211 is configured to do so and forwards the contents over nl80211.
During this process some additional data is also forwarded, including
whether the frame was received encrypted or not. Unfortunately just
prior to the call to ieee80211_deliver_skb_to_local_stack, skb->cb is
cleared, resulting in incorrect data being exposed over nl80211.
Fixes:
018f6fbf540d ("mac80211: Send control port frames over nl80211")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Link: https://lore.kernel.org/r/20190827224120.14545-2-denkenz@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Luca Coelho [Wed, 21 Aug 2019 17:17:32 +0000 (20:17 +0300)]
iwlwifi: pcie: handle switching killer Qu B0 NICs to C0
We need to use a different firmware for C0 versions of killer Qu NICs.
Add structures for them and handle them in the if block that detects
C0 revisions.
Additionally, instead of having an inclusive check for QnJ devices,
make the selection exclusive, so that switching to QnJ is the
exception, not the default. This prevents us from having to add all
the non-QnJ cards to an exclusion list. To do so, only go into the
QnJ block if the device has an RF ID type HR and HW revision QnJ.
Cc: stable@vger.kernel.org # 5.2
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190821171732.2266-1-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Takashi Iwai [Wed, 28 Aug 2019 06:31:19 +0000 (08:31 +0200)]
sky2: Disable MSI on yet another ASUS boards (P6Xxxx)
A similar workaround for the suspend/resume problem is needed for yet
another ASUS machines, P6X models. Like the previous fix, the BIOS
doesn't provide the standard DMI_SYS_* entry, so again DMI_BOARD_*
entries are used instead.
Reported-and-tested-by: SteveM <swm@swm1.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 28 Aug 2019 23:06:49 +0000 (16:06 -0700)]
Merge branch 'nfp-flower-fix-bugs-in-merge-tunnel-encap-code'
Jakub Kicinski says:
====================
nfp: flower: fix bugs in merge tunnel encap code
John says:
There are few bugs in the merge encap code that have come to light with
recent driver changes. Effectively, flow bind callbacks were being
registered twice when using internal ports (new 'busy' code triggers
this). There was also an issue with neighbour notifier messages being
ignored for internal ports.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Wed, 28 Aug 2019 05:56:30 +0000 (22:56 -0700)]
nfp: flower: handle neighbour events on internal ports
Recent code changes to NFP allowed the offload of neighbour entries to FW
when the next hop device was an internal port. This allows for offload of
tunnel encap when the end-point IP address is applied to such a port.
Unfortunately, the neighbour event handler still rejects events that are
not associated with a repr dev and so the firmware neighbour table may get
out of sync for internal ports.
Fix this by allowing internal port neighbour events to be correctly
processed.
Fixes:
45756dfedab5 ("nfp: flower: allow tunnels to output to internal port")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Wed, 28 Aug 2019 05:56:29 +0000 (22:56 -0700)]
nfp: flower: prevent ingress block binds on internal ports
Internal port TC offload is implemented through user-space applications
(such as OvS) by adding filters at egress via TC clsact qdiscs. Indirect
block offload support in the NFP driver accepts both ingress qdisc binds
and egress binds if the device is an internal port. However, clsact sends
bind notification for both ingress and egress block binds which can lead
to the driver registering multiple callbacks and receiving multiple
notifications of new filters.
Fix this by rejecting ingress block bind callbacks when the port is
internal and only adding filter callbacks for egress binds.
Fixes:
4d12ba42787b ("nfp: flower: allow offloading of matches on 'internal' ports")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 28 Aug 2019 23:02:32 +0000 (16:02 -0700)]
Merge branch 'r8152-fix-side-effect'
Hayes Wang says:
====================
r8152: fix side effect
v3:
Update the commit message for patch #1.
v2:
Replace patch #2 with "r8152: remove calling netif_napi_del".
v1:
The commit
0ee1f4734967 ("r8152: napi hangup fix after disconnect")
add a check to avoid using napi_disable after netif_napi_del. However,
the commit
ffa9fec30ca0 ("r8152: set RTL8152_UNPLUG only for real
disconnection") let the check useless.
Therefore, I revert commit
0ee1f4734967 ("r8152: napi hangup fix
after disconnect") first, and add another patch to fix it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hayes Wang [Wed, 28 Aug 2019 01:51:42 +0000 (09:51 +0800)]
r8152: remove calling netif_napi_del
Remove unnecessary use of netif_napi_del. This also avoids to call
napi_disable() after netif_napi_del().
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hayes Wang [Wed, 28 Aug 2019 01:51:41 +0000 (09:51 +0800)]
Revert "r8152: napi hangup fix after disconnect"
This reverts commit
0ee1f4734967af8321ecebaf9c74221ace34f2d5.
The commit
0ee1f4734967 ("r8152: napi hangup fix after
disconnect") adds a check about RTL8152_UNPLUG to determine
if calling napi_disable() is invalid in rtl8152_close(),
when rtl8152_disconnect() is called. This avoids to use
napi_disable() after calling netif_napi_del().
Howver, commit
ffa9fec30ca0 ("r8152: set RTL8152_UNPLUG
only for real disconnection") causes that RTL8152_UNPLUG
is not always set when calling rtl8152_disconnect().
Therefore, I have to revert commit
0ee1f4734967 ("r8152:
napi hangup fix after disconnect"), first. And submit
another patch to fix it.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Tue, 27 Aug 2019 21:18:53 +0000 (23:18 +0200)]
net/sched: pfifo_fast: fix wrong dereference in pfifo_fast_enqueue
Now that 'TCQ_F_CPUSTATS' bit can be cleared, depending on the value of
'TCQ_F_NOLOCK' bit in the parent qdisc, we can't assume anymore that
per-cpu counters are there in the error path of skb_array_produce().
Otherwise, the following splat can be seen:
Unable to handle kernel paging request at virtual address
0000600dea430008
Mem abort info:
ESR = 0x96000005
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000005
CM = 0, WnR = 0
user pgtable: 64k pages, 48-bit VAs, pgdp =
000000007b97530e
[
0000600dea430008] pgd=
0000000000000000, pud=
0000000000000000
Internal error: Oops:
96000005 [#1] SMP
[...]
pstate:
10000005 (nzcV daif -PAN -UAO)
pc : pfifo_fast_enqueue+0x524/0x6e8
lr : pfifo_fast_enqueue+0x46c/0x6e8
sp :
ffff800d39376fe0
x29:
ffff800d39376fe0 x28:
1ffff001a07d1e40
x27:
ffff800d03e8f188 x26:
ffff800d03e8f200
x25:
0000000000000062 x24:
ffff800d393772f0
x23:
0000000000000000 x22:
0000000000000403
x21:
ffff800cca569a00 x20:
ffff800d03e8ee00
x19:
ffff800cca569a10 x18:
00000000000000bf
x17:
0000000000000000 x16:
0000000000000000
x15:
0000000000000000 x14:
ffff1001a726edd0
x13:
1fffe4000276a9a4 x12:
0000000000000000
x11:
dfff200000000000 x10:
ffff800d03e8f1a0
x9 :
0000000000000003 x8 :
0000000000000000
x7 :
00000000f1f1f1f1 x6 :
ffff1001a726edea
x5 :
ffff800cca56a53c x4 :
1ffff001bf9a8003
x3 :
1ffff001bf9a8003 x2 :
1ffff001a07d1dcb
x1 :
0000600dea430000 x0 :
0000600dea430008
Process ping (pid: 6067, stack limit = 0x00000000dc0aa557)
Call trace:
pfifo_fast_enqueue+0x524/0x6e8
htb_enqueue+0x660/0x10e0 [sch_htb]
__dev_queue_xmit+0x123c/0x2de0
dev_queue_xmit+0x24/0x30
ip_finish_output2+0xc48/0x1720
ip_finish_output+0x548/0x9d8
ip_output+0x334/0x788
ip_local_out+0x90/0x138
ip_send_skb+0x44/0x1d0
ip_push_pending_frames+0x5c/0x78
raw_sendmsg+0xed8/0x28d0
inet_sendmsg+0xc4/0x5c0
sock_sendmsg+0xac/0x108
__sys_sendto+0x1ac/0x2a0
__arm64_sys_sendto+0xc4/0x138
el0_svc_handler+0x13c/0x298
el0_svc+0x8/0xc
Code:
f9402e80 d538d081 91002000 8b010000 (
885f7c03)
Fix this by testing the value of 'TCQ_F_CPUSTATS' bit in 'qdisc->flags',
before dereferencing 'qdisc->cpu_qstats'.
Fixes:
8a53e616de29 ("net: sched: when clearing NOLOCK, clear TCQ_F_CPUSTATS, too")
CC: Paolo Abeni <pabeni@redhat.com>
CC: Stefano Brivio <sbrivio@redhat.com>
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Tue, 27 Aug 2019 19:09:33 +0000 (15:09 -0400)]
tcp: inherit timestamp on mtu probe
TCP associates tx timestamp requests with a byte in the bytestream.
If merging skbs in tcp_mtu_probe, migrate the tstamp request.
Similar to MSG_EOR, do not allow moving a timestamp from any segment
in the probe but the last. This to avoid merging multiple timestamps.
Tested with the packetdrill script at
https://github.com/wdebruij/packetdrill/commits/mtu_probe-1
Link: http://patchwork.ozlabs.org/patch/1143278/#2232897
Fixes:
4ed2d765dfac ("net-timestamp: TCP timestamping")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Tue, 27 Aug 2019 18:49:38 +0000 (21:49 +0300)]
net: sched: act_sample: fix psample group handling on overwrite
Action sample doesn't properly handle psample_group pointer in overwrite
case. Following issues need to be fixed:
- In tcf_sample_init() function RCU_INIT_POINTER() is used to set
s->psample_group, even though we neither setting the pointer to NULL, nor
preventing concurrent readers from accessing the pointer in some way.
Use rcu_swap_protected() instead to safely reset the pointer.
- Old value of s->psample_group is not released or deallocated in any way,
which results resource leak. Use psample_group_put() on non-NULL value
obtained with rcu_swap_protected().
- The function psample_group_put() that released reference to struct
psample_group pointed by rcu-pointer s->psample_group doesn't respect rcu
grace period when deallocating it. Extend struct psample_group with rcu
head and use kfree_rcu when freeing it.
Fixes:
5c5670fae430 ("net/sched: Introduce sample tc action")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Tue, 27 Aug 2019 16:10:04 +0000 (11:10 -0500)]
ibmvnic: Do not process reset during or after device removal
Currently, the ibmvnic driver will not schedule device resets
if the device is being removed, but does not check the device
state before the reset is actually processed. This leads to a race
where a reset is scheduled with a valid device state but is
processed after the driver has been removed, resulting in an oops.
Fix this by checking the device state before processing a queued
reset event.
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Tested-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Justin Pettit [Tue, 27 Aug 2019 14:58:10 +0000 (07:58 -0700)]
openvswitch: Clear the L4 portion of the key for "later" fragments.
Only the first fragment in a datagram contains the L4 headers. When the
Open vSwitch module parses a packet, it always sets the IP protocol
field in the key, but can only set the L4 fields on the first fragment.
The original behavior would not clear the L4 portion of the key, so
garbage values would be sent in the key for "later" fragments. This
patch clears the L4 fields in that circumstance to prevent sending those
garbage values as part of the upcall.
Signed-off-by: Justin Pettit <jpettit@ovn.org>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Greg Rose [Tue, 27 Aug 2019 14:58:09 +0000 (07:58 -0700)]
openvswitch: Properly set L4 keys on "later" IP fragments
When IP fragments are reassembled before being sent to conntrack, the
key from the last fragment is used. Unless there are reordering
issues, the last fragment received will not contain the L4 ports, so the
key for the reassembled datagram won't contain them. This patch updates
the key once we have a reassembled datagram.
The handle_fragments() function works on L3 headers so we pull the L3/L4
flow key update code from key_extract into a new function
'key_extract_l3l4'. Then we add a another new function
ovs_flow_key_update_l3l4() and export it so that it is accessible by
handle_fragments() for conntrack packet reassembly.
Co-authored-by: Justin Pettit <jpettit@ovn.org>
Signed-off-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 27 Aug 2019 10:33:12 +0000 (03:33 -0700)]
mld: fix memory leak in mld_del_delrec()
Similar to the fix done for IPv4 in commit
e5b1c6c6277d
("igmp: fix memory leak in igmpv3_del_delrec()"), we need to
make sure mca_tomb and mca_sources are not blindly overwritten.
Using swap() then a call to ip6_mc_clear_src() will take care
of the missing free.
BUG: memory leak
unreferenced object 0xffff888117d9db00 (size 64):
comm "syz-executor247", pid 6918, jiffies
4294943989 (age 25.350s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 fe 88 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
000000005b463030>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<
000000005b463030>] slab_post_alloc_hook mm/slab.h:522 [inline]
[<
000000005b463030>] slab_alloc mm/slab.c:3319 [inline]
[<
000000005b463030>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548
[<
00000000939cbf94>] kmalloc include/linux/slab.h:552 [inline]
[<
00000000939cbf94>] kzalloc include/linux/slab.h:748 [inline]
[<
00000000939cbf94>] ip6_mc_add1_src net/ipv6/mcast.c:2236 [inline]
[<
00000000939cbf94>] ip6_mc_add_src+0x31f/0x420 net/ipv6/mcast.c:2356
[<
00000000d8972221>] ip6_mc_source+0x4a8/0x600 net/ipv6/mcast.c:449
[<
000000002b203d0d>] do_ipv6_setsockopt.isra.0+0x1b92/0x1dd0 net/ipv6/ipv6_sockglue.c:748
[<
000000001f1e2d54>] ipv6_setsockopt+0x89/0xd0 net/ipv6/ipv6_sockglue.c:944
[<
00000000c8f7bdf9>] udpv6_setsockopt+0x4e/0x90 net/ipv6/udp.c:1558
[<
000000005a9a0c5e>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3139
[<
00000000910b37b2>] __sys_setsockopt+0x10f/0x220 net/socket.c:2084
[<
00000000e9108023>] __do_sys_setsockopt net/socket.c:2100 [inline]
[<
00000000e9108023>] __se_sys_setsockopt net/socket.c:2097 [inline]
[<
00000000e9108023>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2097
[<
00000000f4818160>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296
[<
000000008d367e8f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
1666d49e1d41 ("mld: do not remove mld souce list info when set link down")
Fixes:
9c8bb163ae78 ("igmp, mld: Fix memory leak in igmpv3/mld_del_delrec()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Tue, 27 Aug 2019 10:29:09 +0000 (12:29 +0200)]
net/sched: pfifo_fast: fix wrong dereference when qdisc is reset
Now that 'TCQ_F_CPUSTATS' bit can be cleared, depending on the value of
'TCQ_F_NOLOCK' bit in the parent qdisc, we need to be sure that per-cpu
counters are present when 'reset()' is called for pfifo_fast qdiscs.
Otherwise, the following script:
# tc q a dev lo handle 1: root htb default 100
# tc c a dev lo parent 1: classid 1:100 htb \
> rate 95Mbit ceil 100Mbit burst 64k
[...]
# tc f a dev lo parent 1: protocol arp basic classid 1:100
[...]
# tc q a dev lo parent 1:100 handle 100: pfifo_fast
[...]
# tc q d dev lo root
can generate the following splat:
Unable to handle kernel paging request at virtual address
dfff2c01bd148000
Mem abort info:
ESR = 0x96000004
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
[
dfff2c01bd148000] address between user and kernel address ranges
Internal error: Oops:
96000004 [#1] SMP
[...]
pstate:
80000005 (Nzcv daif -PAN -UAO)
pc : pfifo_fast_reset+0x280/0x4d8
lr : pfifo_fast_reset+0x21c/0x4d8
sp :
ffff800d09676fa0
x29:
ffff800d09676fa0 x28:
ffff200012ee22e4
x27:
dfff200000000000 x26:
0000000000000000
x25:
ffff800ca0799958 x24:
ffff1001940f332b
x23:
0000000000000007 x22:
ffff200012ee1ab8
x21:
0000600de8a40000 x20:
0000000000000000
x19:
ffff800ca0799900 x18:
0000000000000000
x17:
0000000000000002 x16:
0000000000000000
x15:
0000000000000000 x14:
0000000000000000
x13:
0000000000000000 x12:
ffff1001b922e6e2
x11:
1ffff001b922e6e1 x10:
0000000000000000
x9 :
1ffff001b922e6e1 x8 :
dfff200000000000
x7 :
0000000000000000 x6 :
0000000000000000
x5 :
1fffe400025dc45c x4 :
1fffe400025dc357
x3 :
00000c01bd148000 x2 :
0000600de8a40000
x1 :
0000000000000007 x0 :
0000600de8a40004
Call trace:
pfifo_fast_reset+0x280/0x4d8
qdisc_reset+0x6c/0x370
htb_reset+0x150/0x3b8 [sch_htb]
qdisc_reset+0x6c/0x370
dev_deactivate_queue.constprop.5+0xe0/0x1a8
dev_deactivate_many+0xd8/0x908
dev_deactivate+0xe4/0x190
qdisc_graft+0x88c/0xbd0
tc_get_qdisc+0x418/0x8a8
rtnetlink_rcv_msg+0x3a8/0xa78
netlink_rcv_skb+0x18c/0x328
rtnetlink_rcv+0x28/0x38
netlink_unicast+0x3c4/0x538
netlink_sendmsg+0x538/0x9a0
sock_sendmsg+0xac/0xf8
___sys_sendmsg+0x53c/0x658
__sys_sendmsg+0xc8/0x140
__arm64_sys_sendmsg+0x74/0xa8
el0_svc_handler+0x164/0x468
el0_svc+0x10/0x14
Code:
910012a0 92400801 d343fc03 11000c21 (
38fb6863)
Fix this by testing the value of 'TCQ_F_CPUSTATS' bit in 'qdisc->flags',
before dereferencing 'qdisc->cpu_qstats'.
Changes since v1:
- coding style improvements, thanks to Stefano Brivio
Fixes:
8a53e616de29 ("net: sched: when clearing NOLOCK, clear TCQ_F_CPUSTATS, too")
CC: Paolo Abeni <pabeni@redhat.com>
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 28 Aug 2019 21:05:48 +0000 (14:05 -0700)]
Merge branch 'macb-Update-ethernet-compatible-string-for-SiFive-FU540'
Yash Shah says:
====================
macb: Update ethernet compatible string for SiFive FU540
This patch series renames the compatible property to a more appropriate
string. The patchset is based on Linux-5.3-rc6 and tested on SiFive
Unleashed board
Change history:
Since v1:
- Dropped PATCH3 because it's already merged
- Change the reference url in the patch descriptions to point to a
'lore.kernel.org' link instead of 'lkml.org'
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yash Shah [Tue, 27 Aug 2019 05:06:04 +0000 (10:36 +0530)]
macb: Update compatibility string for SiFive FU540-C000
Update the compatibility string for SiFive FU540-C000 as per the new
string updated in the binding doc.
Reference:
https://lore.kernel.org/netdev/CAJ2_jOFEVZQat0Yprg4hem4jRrqkB72FKSeQj4p8P5KA-+rgww@mail.gmail.com/
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Tested-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yash Shah [Tue, 27 Aug 2019 05:06:03 +0000 (10:36 +0530)]
macb: bindings doc: update sifive fu540-c000 binding
As per the discussion with Nicolas Ferre[0], rename the compatible property
to a more appropriate and specific string.
[0] https://lore.kernel.org/netdev/CAJ2_jOFEVZQat0Yprg4hem4jRrqkB72FKSeQj4p8P5KA-+rgww@mail.gmail.com/
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 26 Aug 2019 16:19:15 +0000 (09:19 -0700)]
tcp: remove empty skb from write queue in error cases
Vladimir Rutsky reported stuck TCP sessions after memory pressure
events. Edge Trigger epoll() user would never receive an EPOLLOUT
notification allowing them to retry a sendmsg().
Jason tested the case of sk_stream_alloc_skb() returning NULL,
but there are other paths that could lead both sendmsg() and sendpage()
to return -1 (EAGAIN), with an empty skb queued on the write queue.
This patch makes sure we remove this empty skb so that
Jason code can detect that the queue is empty, and
call sk->sk_write_space(sk) accordingly.
Fixes:
ce5ec440994b ("tcp: ensure epoll edge trigger wakeup when write queue is empty")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jason Baron <jbaron@akamai.com>
Reported-by: Vladimir Rutsky <rutsky@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ka-Cheong Poon [Mon, 26 Aug 2019 09:39:12 +0000 (02:39 -0700)]
net/rds: Fix info leak in rds6_inc_info_copy()
The rds6_inc_info_copy() function has a couple struct members which
are leaking stack information. The ->tos field should hold actual
information and the ->flags field needs to be zeroed out.
Fixes:
3eb450367d08 ("rds: add type of service(tos) infrastructure")
Fixes:
b7ff8b1036f0 ("rds: Extend RDS API for IPv6 support")
Reported-by: 黄ID蝴蝶 <butterflyhuangxx@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Feng Sun [Mon, 26 Aug 2019 06:46:04 +0000 (14:46 +0800)]
net: fix skb use after free in netpoll
After commit
baeababb5b85d5c4e6c917efe2a1504179438d3b
("tun: return NET_XMIT_DROP for dropped packets"),
when tun_net_xmit drop packets, it will free skb and return NET_XMIT_DROP,
netpoll_send_skb_on_dev will run into following use after free cases:
1. retry netpoll_start_xmit with freed skb;
2. queue freed skb in npinfo->txq.
queue_process will also run into use after free case.
hit netpoll_send_skb_on_dev first case with following kernel log:
[ 117.864773] kernel BUG at mm/slub.c:306!
[ 117.864773] invalid opcode: 0000 [#1] SMP PTI
[ 117.864774] CPU: 3 PID: 2627 Comm: loop_printmsg Kdump: loaded Tainted: P OE 5.3.0-050300rc5-generic #
201908182231
[ 117.864775] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 117.864775] RIP: 0010:kmem_cache_free+0x28d/0x2b0
[ 117.864781] Call Trace:
[ 117.864781] ? tun_net_xmit+0x21c/0x460
[ 117.864781] kfree_skbmem+0x4e/0x60
[ 117.864782] kfree_skb+0x3a/0xa0
[ 117.864782] tun_net_xmit+0x21c/0x460
[ 117.864782] netpoll_start_xmit+0x11d/0x1b0
[ 117.864788] netpoll_send_skb_on_dev+0x1b8/0x200
[ 117.864789] __br_forward+0x1b9/0x1e0 [bridge]
[ 117.864789] ? skb_clone+0x53/0xd0
[ 117.864790] ? __skb_clone+0x2e/0x120
[ 117.864790] deliver_clone+0x37/0x50 [bridge]
[ 117.864790] maybe_deliver+0x89/0xc0 [bridge]
[ 117.864791] br_flood+0x6c/0x130 [bridge]
[ 117.864791] br_dev_xmit+0x315/0x3c0 [bridge]
[ 117.864792] netpoll_start_xmit+0x11d/0x1b0
[ 117.864792] netpoll_send_skb_on_dev+0x1b8/0x200
[ 117.864792] netpoll_send_udp+0x2c6/0x3e8
[ 117.864793] write_msg+0xd9/0xf0 [netconsole]
[ 117.864793] console_unlock+0x386/0x4e0
[ 117.864793] vprintk_emit+0x17e/0x280
[ 117.864794] vprintk_default+0x29/0x50
[ 117.864794] vprintk_func+0x4c/0xbc
[ 117.864794] printk+0x58/0x6f
[ 117.864795] loop_fun+0x24/0x41 [printmsg_loop]
[ 117.864795] kthread+0x104/0x140
[ 117.864795] ? 0xffffffffc05b1000
[ 117.864796] ? kthread_park+0x80/0x80
[ 117.864796] ret_from_fork+0x35/0x40
Signed-off-by: Feng Sun <loyou85@gmail.com>
Signed-off-by: Xiaojun Zhao <xiaojunzhao141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 25 Aug 2019 18:32:12 +0000 (21:32 +0300)]
net: dsa: tag_8021q: Future-proof the reserved fields in the custom VID
After witnessing the discussion in https://lkml.org/lkml/2019/8/14/151
w.r.t. ioctl extensibility, it became clear that such an issue might
prevent that the 3 RSV bits inside the DSA 802.1Q tag might also suffer
the same fate and be useless for further extension.
So clearly specify that the reserved bits should currently be
transmitted as zero and ignored on receive. The DSA tagger already does
this (and has always did), and is the only known user so far (no
Wireshark dissection plugin, etc). So there should be no incompatibility
to speak of.
Fixes:
0471dd429cea ("net: dsa: tag_8021q: Create a stable binary format")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marco Hartmann [Wed, 21 Aug 2019 11:00:46 +0000 (11:00 +0000)]
Add genphy_c45_config_aneg() function to phy-c45.c
Commit
34786005eca3 ("net: phy: prevent PHYs w/o Clause 22 regs from calling
genphy_config_aneg") introduced a check that aborts phy_config_aneg()
if the phy is a C45 phy.
This causes phy_state_machine() to call phy_error() so that the phy
ends up in PHY_HALTED state.
Instead of returning -EOPNOTSUPP, call genphy_c45_config_aneg()
(analogous to the C22 case) so that the state machine can run
correctly.
genphy_c45_config_aneg() closely resembles mv3310_config_aneg()
in drivers/net/phy/marvell10g.c, excluding vendor specific
configurations for 1000BaseT.
Fixes:
22b56e827093 ("net: phy: replace genphy_10g_driver with genphy_c45_driver")
Signed-off-by: Marco Hartmann <marco.hartmann@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Sun, 25 Aug 2019 17:01:32 +0000 (10:01 -0700)]
net_sched: fix a NULL pointer deref in ipt action
The net pointer in struct xt_tgdtor_param is not explicitly
initialized therefore is still NULL when dereferencing it.
So we have to find a way to pass the correct net pointer to
ipt_destroy_target().
The best way I find is just saving the net pointer inside the per
netns struct tcf_idrinfo, which could make this patch smaller.
Fixes:
0c66dc1ea3f0 ("netfilter: conntrack: register hooks in netns when needed by ruleset")
Reported-and-tested-by: itugrok@yahoo.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 27 Aug 2019 20:22:57 +0000 (13:22 -0700)]
Merge tag 'nfs-for-5.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- Fix a page lock leak in nfs_pageio_resend()
- Ensure O_DIRECT reports an error if the bytes read/written is 0
- Don't handle errors if the bind/connect succeeded
- Revert "NFSv4/flexfiles: Abort I/O early if the layout segment was
invalidat ed"
Bugfixes:
- Don't refresh attributes with mounted-on-file information
- Fix return values for nfs4_file_open() and nfs_finish_open()
- Fix pnfs layoutstats reporting of I/O errors
- Don't use soft RPC calls for pNFS/flexfiles I/O, and don't abort
for soft I/O errors when the user specifies a hard mount.
- Various fixes to the error handling in sunrpc
- Don't report writepage()/writepages() errors twice"
* tag 'nfs-for-5.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: remove set but not used variable 'mapping'
NFSv2: Fix write regression
NFSv2: Fix eof handling
NFS: Fix writepage(s) error handling to not report errors twice
NFS: Fix spurious EIO read errors
pNFS/flexfiles: Don't time out requests on hard mounts
SUNRPC: Handle connection breakages correctly in call_status()
Revert "NFSv4/flexfiles: Abort I/O early if the layout segment was invalidated"
SUNRPC: Handle EADDRINUSE and ENOBUFS correctly
pNFS/flexfiles: Turn off soft RPC calls
SUNRPC: Don't handle errors if the bind/connect succeeded
NFS: On fatal writeback errors, we need to call nfs_inode_remove_request()
NFS: Fix initialisation of I/O result struct in nfs_pgio_rpcsetup
NFS: Ensure O_DIRECT reports an error if the bytes read/written is 0
NFSv4/pnfs: Fix a page lock leak in nfs_pageio_resend()
NFSv4: Fix return value in nfs_finish_open()
NFSv4: Fix return values for nfs4_file_open()
NFS: Don't refresh attributes with mounted-on-file information
Linus Torvalds [Tue, 27 Aug 2019 17:50:27 +0000 (10:50 -0700)]
Merge tag 'arc-5.3-rc7' of git://git./linux/kernel/git/vgupta/arc
Pull ARC updates from Vineet Gupta:
- support for Edge Triggered IRQs in ARC IDU intc
- other fixes here and there
* tag 'arc-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
arc: prefer __section from compiler_attributes.h
dt-bindings: IDU-intc: Add support for edge-triggered interrupts
dt-bindings: IDU-intc: Clean up documentation
ARCv2: IDU-intc: Add support for edge-triggered interrupts
ARC: unwind: Mark expected switch fall-throughs
ARC: [plat-hsdk]: allow to switch between AXI DMAC port configurations
ARC: fix typo in setup_dma_ops log message
ARCv2: entry: early return from exception need not clear U & DE bits
Linus Torvalds [Tue, 27 Aug 2019 17:47:01 +0000 (10:47 -0700)]
Merge tag 'mfd-fixes-5.3' of git://git./linux/kernel/git/lee/mfd
Pull MFD fix from Lee Jones:
"Identify potentially unused functions in rk808 driver when !PM"
* tag 'mfd-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: rk808: Make PM function declaration static
mfd: rk808: Mark pm functions __maybe_unused
Linus Torvalds [Tue, 27 Aug 2019 17:42:03 +0000 (10:42 -0700)]
Merge tag 'sound-5.3-rc7' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes as usual:
- More coverage of USB-audio descriptor sanity checks
- A fix for mute LED regression on Conexant HD-audio codecs
- A few device-specific fixes and quirks for USB-audio and HD-audio
- A fix for (die-hard remaining) possible race in sequencer core
- FireWire oxfw regression fix that was introduced in 5.3-rc1"
* tag 'sound-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: oxfw: fix to handle correct stream for PCM playback
ALSA: seq: Fix potential concurrent access to the deleted pool
ALSA: usb-audio: Check mixer unit bitmap yet more strictly
ALSA: line6: Fix memory leak at line6_init_pcm() error path
ALSA: usb-audio: Fix invalid NULL check in snd_emuusb_set_samplerate()
ALSA: hda/ca0132 - Add new SBZ quirk
ALSA: usb-audio: Add implicit fb quirk for Behringer UFX1604
ALSA: hda - Fixes inverted Conexant GPIO mic mute led
Linus Torvalds [Tue, 27 Aug 2019 17:12:48 +0000 (10:12 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Use 32-bit index for tails calls in s390 bpf JIT, from Ilya
Leoshkevich.
2) Fix missed EPOLLOUT events in TCP, from Eric Dumazet. Same fix for
SMC from Jason Baron.
3) ipv6_mc_may_pull() should return 0 for malformed packets, not
-EINVAL. From Stefano Brivio.
4) Don't forget to unpin umem xdp pages in error path of
xdp_umem_reg(). From Ivan Khoronzhuk.
5) Fix sta object leak in mac80211, from Johannes Berg.
6) Fix regression by not configuring PHYLINK on CPU port of bcm_sf2
switches. From Florian Fainelli.
7) Revert DMA sync removal from r8169 which was causing regressions on
some MIPS Loongson platforms. From Heiner Kallweit.
8) Use after free in flow dissector, from Jakub Sitnicki.
9) Fix NULL derefs of net devices during ICMP processing across
collect_md tunnels, from Hangbin Liu.
10) proto_register() memory leaks, from Zhang Lin.
11) Set NLM_F_MULTI flag in multipart netlink messages consistently,
from John Fastabend.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
r8152: Set memory to all 0xFFs on failed reg reads
openvswitch: Fix conntrack cache with timeout
ipv4: mpls: fix mpls_xmit for iptunnel
nexthop: Fix nexthop_num_path for blackhole nexthops
net: rds: add service level support in rds-info
net: route dump netlink NLM_F_MULTI flag missing
s390/qeth: reject oversized SNMP requests
sock: fix potential memory leak in proto_register()
MAINTAINERS: Add phylink keyword to SFF/SFP/SFP+ MODULE SUPPORT
xfrm/xfrm_policy: fix dst dev null pointer dereference in collect_md mode
ipv4/icmp: fix rt dst dev null pointer dereference
openvswitch: Fix log message in ovs conntrack
bpf: allow narrow loads of some sk_reuseport_md fields with offset > 0
bpf: fix use after free in prog symbol exposure
bpf: fix precision tracking in presence of bpf2bpf calls
flow_dissector: Fix potential use-after-free on BPF_PROG_DETACH
Revert "r8169: remove not needed call to dma_sync_single_for_device"
ipv6: propagate ipv6_add_dev's error returns out of ipv6_find_idev
net/ncsi: Fix the payload copying for the request coming from Netlink
qed: Add cleanup in qed_slowpath_start()
...
YueHaibing [Tue, 27 Aug 2019 07:16:36 +0000 (15:16 +0800)]
NFS: remove set but not used variable 'mapping'
Fixes gcc '-Wunused-but-set-variable' warning:
fs/nfs/write.c: In function nfs_page_async_flush:
fs/nfs/write.c:609:24: warning: variable mapping set but not used [-Wunused-but-set-variable]
It is not use since commit
aefb623c422e ("NFS: Fix
writepage(s) error handling to not report errors twice")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Tue, 27 Aug 2019 11:03:28 +0000 (07:03 -0400)]
NFSv2: Fix write regression
Ensure we update the write result count on success, since the
RPC call itself does not do so.
Reported-by: Jan Stancek <jstancek@redhat.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Trond Myklebust [Tue, 27 Aug 2019 00:41:16 +0000 (20:41 -0400)]
NFSv2: Fix eof handling
If we received a reply from the server with a zero length read and
no error, then that implies we are at eof.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Lee Jones [Tue, 27 Aug 2019 06:39:50 +0000 (07:39 +0100)]
mfd: rk808: Make PM function declaration static
Avoids:
../drivers/mfd/rk808.c:771:1: warning: symbol 'rk8xx_pm_ops' \
was not declared. Should it be static?
Fixes:
5752bc4373b2 ("mfd: rk808: Mark pm functions __maybe_unused")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Arnd Bergmann [Mon, 8 Jul 2019 12:53:02 +0000 (14:53 +0200)]
mfd: rk808: Mark pm functions __maybe_unused
The newly added suspend/resume functions are only used if CONFIG_PM
is enabled:
drivers/mfd/rk808.c:752:12: error: 'rk8xx_resume' defined but not used [-Werror=unused-function]
drivers/mfd/rk808.c:732:12: error: 'rk8xx_suspend' defined but not used [-Werror=unused-function]
Mark them as __maybe_unused so the compiler can silently drop them
when they are not needed.
Fixes:
586c1b4125b3 ("mfd: rk808: Add RK817 and RK809 support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Trond Myklebust [Sat, 24 Aug 2019 14:39:00 +0000 (10:39 -0400)]
NFS: Fix writepage(s) error handling to not report errors twice
If writepage()/writepages() saw an error, but handled it without
reporting it, we should not be re-reporting that error on exit.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Thu, 15 Aug 2019 16:26:05 +0000 (12:26 -0400)]
NFS: Fix spurious EIO read errors
If the client attempts to read a page, but the read fails due to some
spurious error (e.g. an ACCESS error or a timeout, ...) then we need
to allow other processes to retry.
Also try to report errors correctly when doing a synchronous readpage.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Fri, 23 Aug 2019 12:37:50 +0000 (08:37 -0400)]
pNFS/flexfiles: Don't time out requests on hard mounts
If the mount is hard, we should ignore the 'io_maxretrans' module
parameter so that we always keep retrying.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Fri, 16 Aug 2019 12:58:48 +0000 (08:58 -0400)]
SUNRPC: Handle connection breakages correctly in call_status()
If the connection breaks while we're waiting for a reply from the
server, then we want to immediately try to reconnect.
Fixes:
ec6017d90359 ("SUNRPC fix regression in umount of a secure mount")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Fri, 16 Aug 2019 12:37:26 +0000 (08:37 -0400)]
Revert "NFSv4/flexfiles: Abort I/O early if the layout segment was invalidated"
This reverts commit
a79f194aa4879e9baad118c3f8bb2ca24dbef765.
The mechanism for aborting I/O is racy, since we are not guaranteed that
the request is asleep while we're changing both task->tk_status and
task->tk_action.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v5.1
Trond Myklebust [Fri, 16 Aug 2019 02:55:19 +0000 (22:55 -0400)]
SUNRPC: Handle EADDRINUSE and ENOBUFS correctly
If a connect or bind attempt returns EADDRINUSE, that means we want to
retry with a different port. It is not a fatal connection error.
Similarly, ENOBUFS is not fatal, but just indicates a memory allocation
issue. Retry after a short delay.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Fri, 16 Aug 2019 00:18:48 +0000 (20:18 -0400)]
pNFS/flexfiles: Turn off soft RPC calls
The pNFS/flexfiles I/O requests are sent with the SOFTCONN flag set, so
they automatically time out if the connection breaks. It should
therefore not be necessary to have the soft flag set in addition.
Fixes:
5f01d9539496 ("nfs41: create NFSv3 DS connection if specified")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Thu, 15 Aug 2019 21:26:17 +0000 (17:26 -0400)]
SUNRPC: Don't handle errors if the bind/connect succeeded
Don't handle errors in call_bind_status()/call_connect_status()
if it turns out that a previous call caused it to succeed.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v5.1+
Nick Desaulniers [Mon, 12 Aug 2019 21:50:35 +0000 (14:50 -0700)]
arc: prefer __section from compiler_attributes.h
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Mischa Jonker [Wed, 24 Jul 2019 12:04:36 +0000 (14:04 +0200)]
dt-bindings: IDU-intc: Add support for edge-triggered interrupts
This updates the documentation for supporting an optional extra interrupt
cell to specify edge vs level triggered.
Signed-off-by: Mischa Jonker <mischa.jonker@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Mischa Jonker [Wed, 24 Jul 2019 12:04:35 +0000 (14:04 +0200)]
dt-bindings: IDU-intc: Clean up documentation
* Some lines exceeded 80 characters.
* Clarified statement about AUX register interface
Signed-off-by: Mischa Jonker <mischa.jonker@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Mischa Jonker [Wed, 24 Jul 2019 12:04:34 +0000 (14:04 +0200)]
ARCv2: IDU-intc: Add support for edge-triggered interrupts
This adds support for an optional extra interrupt cell to specify edge
vs level triggered. It is backward compatible with dts files with only
one cell, and will default to level-triggered in such a case.
Note that I had to make a change to idu_irq_set_affinity as well, as
this function was setting the interrupt type to "level" unconditionally,
since this was the only type supported previously.
Signed-off-by: Mischa Jonker <mischa.jonker@synopsys.com>
Reviewed-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Takashi Sakamoto [Mon, 26 Aug 2019 13:55:15 +0000 (22:55 +0900)]
ALSA: oxfw: fix to handle correct stream for PCM playback
When userspace application calls ioctl(2) to configure hardware for PCM
playback substream, ALSA OXFW driver handles incoming AMDTP stream.
In this case, outgoing AMDTP stream should be handled.
This commit fixes the bug for v5.3-rc kernel.
Fixes:
4f380d007052 ("ALSA: oxfw: configure packet format in pcm.hw_params callback")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Prashant Malani [Sat, 24 Aug 2019 08:36:19 +0000 (01:36 -0700)]
r8152: Set memory to all 0xFFs on failed reg reads
get_registers() blindly copies the memory written to by the
usb_control_msg() call even if the underlying urb failed.
This could lead to junk register values being read by the driver, since
some indirect callers of get_registers() ignore the return values. One
example is:
ocp_read_dword() ignores the return value of generic_ocp_read(), which
calls get_registers().
So, emulate PCI "Master Abort" behavior by setting the buffer to all
0xFFs when usb_control_msg() fails.
This patch is copied from the r8152 driver (v2.12.0) published by
Realtek (www.realtek.com).
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yi-Hung Wei [Thu, 22 Aug 2019 20:17:50 +0000 (13:17 -0700)]
openvswitch: Fix conntrack cache with timeout
This patch addresses a conntrack cache issue with timeout policy.
Currently, we do not check if the timeout extension is set properly in the
cached conntrack entry. Thus, after packet recirculate from conntrack
action, the timeout policy is not applied properly. This patch fixes the
aforementioned issue.
Fixes:
06bd2bdf19d2 ("openvswitch: Add timeout support to ct action")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Kodanev [Fri, 23 Aug 2019 17:51:43 +0000 (20:51 +0300)]
ipv4: mpls: fix mpls_xmit for iptunnel
When using mpls over gre/gre6 setup, rt->rt_gw4 address is not set, the
same for rt->rt_gw_family. Therefore, when rt->rt_gw_family is checked
in mpls_xmit(), neigh_xmit() call is skipped. As a result, such setup
doesn't work anymore.
This issue was found with LTP mpls03 tests.
Fixes:
1550c171935d ("ipv4: Prepare rtable for IPv6 gateway")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Sun, 25 Aug 2019 14:47:30 +0000 (07:47 -0700)]
nexthop: Fix nexthop_num_path for blackhole nexthops
Donald reported this sequence:
ip next add id 1 blackhole
ip next add id 2 blackhole
ip ro add 1.1.1.1/32 nhid 1
ip ro add 1.1.1.2/32 nhid 2
would cause a crash. Backtrace is:
[ 151.302790] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 151.304043] CPU: 1 PID: 277 Comm: ip Not tainted 5.3.0-rc5+ #37
[ 151.305078] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014
[ 151.306526] RIP: 0010:fib_add_nexthop+0x8b/0x2aa
[ 151.307343] Code: 35 f7 81 48 8d 14 01 c7 02 f1 f1 f1 f1 c7 42 04 01 f4 f4 f4 48 89 f2 48 c1 ea 03 65 48 8b 0c 25 28 00 00 00 48 89 4d d0 31 c9 <80> 3c 02 00 74 08 48 89 f7 e8 1a e8 53 ff be 08 00 00 00 4c 89 e7
[ 151.310549] RSP: 0018:
ffff888116c27340 EFLAGS:
00010246
[ 151.311469] RAX:
dffffc0000000000 RBX:
ffff8881154ece00 RCX:
0000000000000000
[ 151.312713] RDX:
0000000000000004 RSI:
0000000000000020 RDI:
ffff888115649b40
[ 151.313968] RBP:
ffff888116c273d8 R08:
ffffed10221e3757 R09:
ffff888110f1bab8
[ 151.315212] R10:
0000000000000001 R11:
ffff888110f1bab3 R12:
ffff888115649b40
[ 151.316456] R13:
0000000000000020 R14:
ffff888116c273b0 R15:
ffff888115649b40
[ 151.317707] FS:
00007f60b4d8d800(0000) GS:
ffff88811ac00000(0000) knlGS:
0000000000000000
[ 151.319113] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 151.320119] CR2:
0000555671ffdc00 CR3:
00000001136ba005 CR4:
0000000000020ee0
[ 151.321367] Call Trace:
[ 151.321820] ? fib_nexthop_info+0x635/0x635
[ 151.322572] fib_dump_info+0xaa4/0xde0
[ 151.323247] ? fib_create_info+0x2431/0x2431
[ 151.324008] ? napi_alloc_frag+0x2a/0x2a
[ 151.324711] rtmsg_fib+0x2c4/0x3be
[ 151.325339] fib_table_insert+0xe2f/0xeee
...
fib_dump_info incorrectly has nhs = 0 for blackhole nexthops, so it
believes the nexthop object is a multipath group (nhs != 1) and ends
up down the nexthop_mpath_fill_node() path which is wrong for a
blackhole.
The blackhole check in nexthop_num_path is leftover from early days
of the blackhole implementation which did not initialize the device.
In the end the design was simpler (fewer special case checks) to set
the device to loopback in nh_info, so the check in nexthop_num_path
should have been removed.
Fixes:
430a049190de ("nexthop: Add support for nexthop groups")
Reported-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 25 Aug 2019 19:01:23 +0000 (12:01 -0700)]
Linux 5.3-rc6
Linus Torvalds [Sun, 25 Aug 2019 18:43:17 +0000 (11:43 -0700)]
Merge tag 'auxdisplay-for-linus-v5.3-rc7' of git://github.com/ojeda/linux
Pull auxdisplay cleanup from Miguel Ojeda:
"Make ht16k33_fb_fix and ht16k33_fb_var constant (Nishka Dasgupta)"
* tag 'auxdisplay-for-linus-v5.3-rc7' of git://github.com/ojeda/linux:
auxdisplay: ht16k33: Make ht16k33_fb_fix and ht16k33_fb_var constant
Linus Torvalds [Sun, 25 Aug 2019 18:40:24 +0000 (11:40 -0700)]
Merge tag 'for-linus-5.3-rc6' of git://git./linux/kernel/git/rw/uml
Pull UML fix from Richard Weinberger:
"Fix time travel mode"
* tag 'for-linus-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: fix time travel mode
Linus Torvalds [Sun, 25 Aug 2019 18:29:27 +0000 (11:29 -0700)]
Merge tag 'for-linus-5.3-rc6' of git://git./linux/kernel/git/rw/ubifs
Pull UBIFS and JFFS2 fixes from Richard Weinberger:
"UBIFS:
- Don't block too long in writeback_inodes_sb()
- Fix for a possible overrun of the log head
- Fix double unlock in orphan_delete()
JFFS2:
- Remove C++ style from UAPI header and unbreak picky toolchains"
* tag 'for-linus-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubifs: Limit the number of pages in shrink_liability
ubifs: Correctly initialize c->min_log_bytes
ubifs: Fix double unlock around orphan_delete()
jffs2: Remove C++ style comments from uapi header
Linus Torvalds [Sun, 25 Aug 2019 17:10:15 +0000 (10:10 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A few fixes for x86:
- Fix a boot regression caused by the recent bootparam sanitizing
change, which escaped the attention of all people who reviewed that
code.
- Address a boot problem on machines with broken E820 tables caused
by an underflow which ended up placing the trampoline start at
physical address 0.
- Handle machines which do not advertise a legacy timer of any form,
but need calibration of the local APIC timer gracefully by making
the calibration routine independent from the tick interrupt. Marked
for stable as well as there seems to be quite some new laptops
rolled out which expose this.
- Clear the RDRAND CPUID bit on AMD family 15h and 16h CPUs which are
affected by broken firmware which does not initialize RDRAND
correctly after resume. Add a command line parameter to override
this for machine which either do not use suspend/resume or have a
fixed BIOS. Unfortunately there is no way to detect this on boot,
so the only safe decision is to turn it off by default.
- Prevent RFLAGS from being clobbers in CALL_NOSPEC on 32bit which
caused fast KVM instruction emulation to break.
- Explain the Intel CPU model naming convention so that the repeating
discussions come to an end"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retpoline: Don't clobber RFLAGS during CALL_NOSPEC on i386
x86/boot: Fix boot regression caused by bootparam sanitizing
x86/CPU/AMD: Clear RDRAND CPUID bit on AMD family 15h/16h
x86/boot/compressed/64: Fix boot on machines with broken E820 table
x86/apic: Handle missing global clockevent gracefully
x86/cpu: Explain Intel model naming convention
Linus Torvalds [Sun, 25 Aug 2019 17:08:01 +0000 (10:08 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timekeeping fix from Thomas Gleixner:
"A single fix for a regression caused by the generic VDSO
implementation where a math overflow causes CLOCK_BOOTTIME to become a
random number generator"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping/vsyscall: Prevent math overflow in BOOTTIME update
Linus Torvalds [Sun, 25 Aug 2019 17:06:12 +0000 (10:06 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"Handle the worker management in situations where a task is scheduled
out on a PI lock contention correctly and schedule a new worker if
possible"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Schedule new worker even if PI-blocked
Linus Torvalds [Sun, 25 Aug 2019 17:03:32 +0000 (10:03 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Two small fixes for kprobes and perf:
- Prevent a deadlock in kprobe_optimizer() causes by reverse lock
ordering
- Fix a comment typo"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kprobes: Fix potential deadlock in kprobe_optimizer()
perf/x86: Fix typo in comment
Linus Torvalds [Sun, 25 Aug 2019 17:00:21 +0000 (10:00 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for a imbalanced kobject operation in the irq decriptor
code which was unearthed by the new warnings in the kobject code"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Properly pair kobject_del() with kobject_add()
Linus Torvalds [Sun, 25 Aug 2019 16:56:27 +0000 (09:56 -0700)]
Merge branch 'akpm' (patches from Andrew)
Mergr misc fixes from Andrew Morton:
"11 fixes"
Mostly VM fixes, one psi polling fix, and one parisc build fix.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/kasan: fix false positive invalid-free reports with CONFIG_KASAN_SW_TAGS=y
mm/zsmalloc.c: fix race condition in zs_destroy_pool
mm/zsmalloc.c: migration can leave pages in ZS_EMPTY indefinitely
mm, page_owner: handle THP splits correctly
userfaultfd_release: always remove uffd flags and clear vm_userfaultfd_ctx
psi: get poll_work to run when calling poll syscall next time
mm: memcontrol: flush percpu vmevents before releasing memcg
mm: memcontrol: flush percpu vmstats before releasing memcg
parisc: fix compilation errrors
mm, page_alloc: move_freepages should not examine struct page of reserved memory
mm/z3fold.c: fix race between migration and destruction
Takashi Iwai [Sun, 25 Aug 2019 07:21:44 +0000 (09:21 +0200)]
ALSA: seq: Fix potential concurrent access to the deleted pool
The input pool of a client might be deleted via the resize ioctl, the
the access to it should be covered by the proper locks. Currently the
only missing place is the call in snd_seq_ioctl_get_client_pool(), and
this patch papers over it.
Reported-by: syzbot+4a75454b9ca2777f35c7@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Sun, 25 Aug 2019 03:00:11 +0000 (20:00 -0700)]
Merge tag 'dma-mapping-5.3-5' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Two fixes for regressions in this merge window:
- select the Kconfig symbols for the noncoherent dma arch helpers on
arm if swiotlb is selected, not just for LPAE to not break then Xen
build, that uses swiotlb indirectly through swiotlb-xen
- fix the page allocator fallback in dma_alloc_contiguous if the CMA
allocation fails"
* tag 'dma-mapping-5.3-5' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: fix zone selection after an unaddressable CMA allocation
arm: select the dma-noncoherent symbols for all swiotlb builds
Andrey Ryabinin [Sun, 25 Aug 2019 00:55:09 +0000 (17:55 -0700)]
mm/kasan: fix false positive invalid-free reports with CONFIG_KASAN_SW_TAGS=y
The code like this:
ptr = kmalloc(size, GFP_KERNEL);
page = virt_to_page(ptr);
offset = offset_in_page(ptr);
kfree(page_address(page) + offset);
may produce false-positive invalid-free reports on the kernel with
CONFIG_KASAN_SW_TAGS=y.
In the example above we lose the original tag assigned to 'ptr', so
kfree() gets the pointer with 0xFF tag. In kfree() we check that 0xFF
tag is different from the tag in shadow hence print false report.
Instead of just comparing tags, do the following:
1) Check that shadow doesn't contain KASAN_TAG_INVALID. Otherwise it's
double-free and it doesn't matter what tag the pointer have.
2) If pointer tag is different from 0xFF, make sure that tag in the
shadow is the same as in the pointer.
Link: http://lkml.kernel.org/r/20190819172540.19581-1-aryabinin@virtuozzo.com
Fixes:
7f94ffbc4c6a ("kasan: add hooks implementation for tag-based mode")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Walter Wu <walter-zh.wu@mediatek.com>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Henry Burns [Sun, 25 Aug 2019 00:55:06 +0000 (17:55 -0700)]
mm/zsmalloc.c: fix race condition in zs_destroy_pool
In zs_destroy_pool() we call flush_work(&pool->free_work). However, we
have no guarantee that migration isn't happening in the background at
that time.
Since migration can't directly free pages, it relies on free_work being
scheduled to free the pages. But there's nothing preventing an
in-progress migrate from queuing the work *after*
zs_unregister_migration() has called flush_work(). Which would mean
pages still pointing at the inode when we free it.
Since we know at destroy time all objects should be free, no new
migrations can come in (since zs_page_isolate() fails for fully-free
zspages). This means it is sufficient to track a "# isolated zspages"
count by class, and have the destroy logic ensure all such pages have
drained before proceeding. Keeping that state under the class spinlock
keeps the logic straightforward.
In this case a memory leak could lead to an eventual crash if compaction
hits the leaked page. This crash would only occur if people are
changing their zswap backend at runtime (which eventually starts
destruction).
Link: http://lkml.kernel.org/r/20190809181751.219326-2-henryburns@google.com
Fixes:
48b4800a1c6a ("zsmalloc: page migration support")
Signed-off-by: Henry Burns <henryburns@google.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Jonathan Adams <jwadams@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Henry Burns [Sun, 25 Aug 2019 00:55:03 +0000 (17:55 -0700)]
mm/zsmalloc.c: migration can leave pages in ZS_EMPTY indefinitely
In zs_page_migrate() we call putback_zspage() after we have finished
migrating all pages in this zspage. However, the return value is
ignored. If a zs_free() races in between zs_page_isolate() and
zs_page_migrate(), freeing the last object in the zspage,
putback_zspage() will leave the page in ZS_EMPTY for potentially an
unbounded amount of time.
To fix this, we need to do the same thing as zs_page_putback() does:
schedule free_work to occur.
To avoid duplicated code, move the sequence to a new
putback_zspage_deferred() function which both zs_page_migrate() and
zs_page_putback() call.
Link: http://lkml.kernel.org/r/20190809181751.219326-1-henryburns@google.com
Fixes:
48b4800a1c6a ("zsmalloc: page migration support")
Signed-off-by: Henry Burns <henryburns@google.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Jonathan Adams <jwadams@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Sun, 25 Aug 2019 00:54:59 +0000 (17:54 -0700)]
mm, page_owner: handle THP splits correctly
THP splitting path is missing the split_page_owner() call that
split_page() has.
As a result, split THP pages are wrongly reported in the page_owner file
as order-9 pages. Furthermore when the former head page is freed, the
remaining former tail pages are not listed in the page_owner file at
all. This patch fixes that by adding the split_page_owner() call into
__split_huge_page().
Link: http://lkml.kernel.org/r/20190820131828.22684-2-vbabka@suse.cz
Fixes:
a9627bc5e34e ("mm/page_owner: introduce split_page_owner and replace manual handling")
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Sun, 25 Aug 2019 00:54:56 +0000 (17:54 -0700)]
userfaultfd_release: always remove uffd flags and clear vm_userfaultfd_ctx
userfaultfd_release() should clear vm_flags/vm_userfaultfd_ctx even if
mm->core_state != NULL.
Otherwise a page fault can see userfaultfd_missing() == T and use an
already freed userfaultfd_ctx.
Link: http://lkml.kernel.org/r/20190820160237.GB4983@redhat.com
Fixes:
04f5866e41fb ("coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jason Xing [Sun, 25 Aug 2019 00:54:53 +0000 (17:54 -0700)]
psi: get poll_work to run when calling poll syscall next time
Only when calling the poll syscall the first time can user receive
POLLPRI correctly. After that, user always fails to acquire the event
signal.
Reproduce case:
1. Get the monitor code in Documentation/accounting/psi.txt
2. Run it, and wait for the event triggered.
3. Kill and restart the process.
The question is why we can end up with poll_scheduled = 1 but the work
not running (which would reset it to 0). And the answer is because the
scheduling side sees group->poll_kworker under RCU protection and then
schedules it, but here we cancel the work and destroy the worker. The
cancel needs to pair with resetting the poll_scheduled flag.
Link: http://lkml.kernel.org/r/1566357985-97781-1-git-send-email-joseph.qi@linux.alibaba.com
Signed-off-by: Jason Xing <kerneljasonxing@linux.alibaba.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Caspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Sun, 25 Aug 2019 00:54:50 +0000 (17:54 -0700)]
mm: memcontrol: flush percpu vmevents before releasing memcg
Similar to vmstats, percpu caching of local vmevents leads to an
accumulation of errors on non-leaf levels. This happens because some
leftovers may remain in percpu caches, so that they are never propagated
up by the cgroup tree and just disappear into nonexistence with on
releasing of the memory cgroup.
To fix this issue let's accumulate and propagate percpu vmevents values
before releasing the memory cgroup similar to what we're doing with
vmstats.
Since on cpu hotplug we do flush percpu vmstats anyway, we can iterate
only over online cpus.
Link: http://lkml.kernel.org/r/20190819202338.363363-4-guro@fb.com
Fixes:
42a300353577 ("mm: memcontrol: fix recursive statistics correctness & scalabilty")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Sun, 25 Aug 2019 00:54:47 +0000 (17:54 -0700)]
mm: memcontrol: flush percpu vmstats before releasing memcg
Percpu caching of local vmstats with the conditional propagation by the
cgroup tree leads to an accumulation of errors on non-leaf levels.
Let's imagine two nested memory cgroups A and A/B. Say, a process
belonging to A/B allocates 100 pagecache pages on the CPU 0. The percpu
cache will spill 3 times, so that 32*3=96 pages will be accounted to A/B
and A atomic vmstat counters, 4 pages will remain in the percpu cache.
Imagine A/B is nearby memory.max, so that every following allocation
triggers a direct reclaim on the local CPU. Say, each such attempt will
free 16 pages on a new cpu. That means every percpu cache will have -16
pages, except the first one, which will have 4 - 16 = -12. A/B and A
atomic counters will not be touched at all.
Now a user removes A/B. All percpu caches are freed and corresponding
vmstat numbers are forgotten. A has 96 pages more than expected.
As memory cgroups are created and destroyed, errors do accumulate. Even
1-2 pages differences can accumulate into large numbers.
To fix this issue let's accumulate and propagate percpu vmstat values
before releasing the memory cgroup. At this point these numbers are
stable and cannot be changed.
Since on cpu hotplug we do flush percpu vmstats anyway, we can iterate
only over online cpus.
Link: http://lkml.kernel.org/r/20190819202338.363363-2-guro@fb.com
Fixes:
42a300353577 ("mm: memcontrol: fix recursive statistics correctness & scalabilty")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qian Cai [Sun, 25 Aug 2019 00:54:43 +0000 (17:54 -0700)]
parisc: fix compilation errrors
Commit
0cfaee2af3a0 ("include/asm-generic/5level-fixup.h: fix variable
'p4d' set but not used") converted a few functions from macros to static
inline, which causes parisc to complain,
In file included from include/asm-generic/4level-fixup.h:38:0,
from arch/parisc/include/asm/pgtable.h:5,
from arch/parisc/include/asm/io.h:6,
from include/linux/io.h:13,
from sound/core/memory.c:9:
include/asm-generic/5level-fixup.h:14:18: error: unknown type name 'pgd_t'; did you mean 'pid_t'?
#define p4d_t pgd_t
^
include/asm-generic/5level-fixup.h:24:28: note: in expansion of macro 'p4d_t'
static inline int p4d_none(p4d_t p4d)
^~~~~
It is because "4level-fixup.h" is included before "asm/page.h" where
"pgd_t" is defined.
Link: http://lkml.kernel.org/r/20190815205305.1382-1-cai@lca.pw
Fixes:
0cfaee2af3a0 ("include/asm-generic/5level-fixup.h: fix variable 'p4d' set but not used")
Signed-off-by: Qian Cai <cai@lca.pw>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Sun, 25 Aug 2019 00:54:40 +0000 (17:54 -0700)]
mm, page_alloc: move_freepages should not examine struct page of reserved memory
After commit
907ec5fca3dc ("mm: zero remaining unavailable struct
pages"), struct page of reserved memory is zeroed. This causes
page->flags to be 0 and fixes issues related to reading
/proc/kpageflags, for example, of reserved memory.
The VM_BUG_ON() in move_freepages_block(), however, assumes that
page_zone() is meaningful even for reserved memory. That assumption is
no longer true after the aforementioned commit.
There's no reason why move_freepages_block() should be testing the
legitimacy of page_zone() for reserved memory; its scope is limited only
to pages on the zone's freelist.
Note that pfn_valid() can be true for reserved memory: there is a
backing struct page. The check for page_to_nid(page) is also buggy but
reserved memory normally only appears on node 0 so the zeroing doesn't
affect this.
Move the debug checks to after verifying PageBuddy is true. This
isolates the scope of the checks to only be for buddy pages which are on
the zone's freelist which move_freepages_block() is operating on. In
this case, an incorrect node or zone is a bug worthy of being warned
about (and the examination of struct page is acceptable bcause this
memory is not reserved).
Why does move_freepages_block() gets called on reserved memory? It's
simply math after finding a valid free page from the per-zone free area
to use as fallback. We find the beginning and end of the pageblock of
the valid page and that can bring us into memory that was reserved per
the e820. pfn_valid() is still true (it's backed by a struct page), but
since it's zero'd we shouldn't make any inferences here about comparing
its node or zone. The current node check just happens to succeed most
of the time by luck because reserved memory typically appears on node 0.
The fix here is to validate that we actually have buddy pages before
testing if there's any type of zone or node strangeness going on.
We noticed it almost immediately after bringing
907ec5fca3dc in on
CONFIG_DEBUG_VM builds. It depends on finding specific free pages in
the per-zone free area where the math in move_freepages() will bring the
start or end pfn into reserved memory and wanting to claim that entire
pageblock as a new migratetype. So the path will be rare, require
CONFIG_DEBUG_VM, and require fallback to a different migratetype.
Some struct pages were already zeroed from reserve pages before
907ec5fca3c so it theoretically could trigger before this commit. I
think it's rare enough under a config option that most people don't run
that others may not have noticed. I wouldn't argue against a stable tag
and the backport should be easy enough, but probably wouldn't single out
a commit that this is fixing.
Mel said:
: The overhead of the debugging check is higher with this patch although
: it'll only affect debug builds and the path is not particularly hot.
: If this was a concern, I think it would be reasonable to simply remove
: the debugging check as the zone boundaries are checked in
: move_freepages_block and we never expect a zone/node to be smaller than
: a pageblock and stuck in the middle of another zone.
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1908122036560.10779@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Henry Burns [Sun, 25 Aug 2019 00:54:37 +0000 (17:54 -0700)]
mm/z3fold.c: fix race between migration and destruction
In z3fold_destroy_pool() we call destroy_workqueue(&pool->compact_wq).
However, we have no guarantee that migration isn't happening in the
background at that time.
Migration directly calls queue_work_on(pool->compact_wq), if destruction
wins that race we are using a destroyed workqueue.
Link: http://lkml.kernel.org/r/20190809213828.202833-1-henryburns@google.com
Signed-off-by: Henry Burns <henryburns@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Jonathan Adams <jwadams@google.com>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhu Yanjun [Sat, 24 Aug 2019 01:04:16 +0000 (21:04 -0400)]
net: rds: add service level support in rds-info
>From IB specific 7.6.5 SERVICE LEVEL, Service Level (SL)
is used to identify different flows within an IBA subnet.
It is carried in the local route header of the packet.
Before this commit, run "rds-info -I". The outputs are as
below:
"
RDS IB Connections:
LocalAddr RemoteAddr Tos SL LocalDev RemoteDev
192.2.95.3 192.2.95.1 2 0 fe80::21:28:1a:39 fe80::21:28:10:b9
192.2.95.3 192.2.95.1 1 0 fe80::21:28:1a:39 fe80::21:28:10:b9
192.2.95.3 192.2.95.1 0 0 fe80::21:28:1a:39 fe80::21:28:10:b9
"
After this commit, the output is as below:
"
RDS IB Connections:
LocalAddr RemoteAddr Tos SL LocalDev RemoteDev
192.2.95.3 192.2.95.1 2 2 fe80::21:28:1a:39 fe80::21:28:10:b9
192.2.95.3 192.2.95.1 1 1 fe80::21:28:1a:39 fe80::21:28:10:b9
192.2.95.3 192.2.95.1 0 0 fe80::21:28:1a:39 fe80::21:28:10:b9
"
The commit
fe3475af3bdf ("net: rds: add per rds connection cache
statistics") adds cache_allocs in struct rds_info_rdma_connection
as below:
struct rds_info_rdma_connection {
...
__u32 rdma_mr_max;
__u32 rdma_mr_size;
__u8 tos;
__u32 cache_allocs;
};
The peer struct in rds-tools of struct rds_info_rdma_connection is as
below:
struct rds_info_rdma_connection {
...
uint32_t rdma_mr_max;
uint32_t rdma_mr_size;
uint8_t tos;
uint8_t sl;
uint32_t cache_allocs;
};
The difference between userspace and kernel is the member variable sl.
In the kernel struct, the member variable sl is missing. This will
introduce risks. So it is necessary to use this commit to avoid this risk.
Fixes:
fe3475af3bdf ("net: rds: add per rds connection cache statistics")
CC: Joe Jin <joe.jin@oracle.com>
CC: JUNXIAO_BI <junxiao.bi@oracle.com>
Suggested-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Sat, 24 Aug 2019 00:11:38 +0000 (17:11 -0700)]
net: route dump netlink NLM_F_MULTI flag missing
An excerpt from netlink(7) man page,
In multipart messages (multiple nlmsghdr headers with associated payload
in one byte stream) the first and all following headers have the
NLM_F_MULTI flag set, except for the last header which has the type
NLMSG_DONE.
but, after (
ee28906) there is a missing NLM_F_MULTI flag in the middle of a
FIB dump. The result is user space applications following above man page
excerpt may get confused and may stop parsing msg believing something went
wrong.
In the golang netlink lib [0] the library logic stops parsing believing the
message is not a multipart message. Found this running Cilium[1] against
net-next while adding a feature to auto-detect routes. I noticed with
multiple route tables we no longer could detect the default routes on net
tree kernels because the library logic was not returning them.
Fix this by handling the fib_dump_info_fnhe() case the same way the
fib_dump_info() handles it by passing the flags argument through the
call chain and adding a flags argument to rt_fill_info().
Tested with Cilium stack and auto-detection of routes works again. Also
annotated libs to dump netlink msgs and inspected NLM_F_MULTI and
NLMSG_DONE flags look correct after this.
Note: In inet_rtm_getroute() pass rt_fill_info() '0' for flags the same
as is done for fib_dump_info() so this looks correct to me.
[0] https://github.com/vishvananda/netlink/
[1] https://github.com/cilium/
Fixes:
ee28906fd7a14 ("ipv4: Dump route exceptions if requested")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Fri, 23 Aug 2019 09:29:23 +0000 (11:29 +0200)]
s390/qeth: reject oversized SNMP requests
Commit
d4c08afafa04 ("s390/qeth: streamline SNMP cmd code") removed
the bounds checking for req_len, under the assumption that the check in
qeth_alloc_cmd() would suffice.
But that code path isn't sufficiently robust to handle a user-provided
data_length, which could overflow (when adding the cmd header overhead)
before being checked against QETH_BUFSIZE. We end up allocating just a
tiny iob, and the subsequent copy_from_user() writes past the end of
that iob.
Special-case this path and add a coarse bounds check, to protect against
maliciuous requests. This let's the subsequent code flow do its normal
job and precise checking, without risk of overflow.
Fixes:
d4c08afafa04 ("s390/qeth: streamline SNMP cmd code")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
zhanglin [Fri, 23 Aug 2019 01:14:11 +0000 (09:14 +0800)]
sock: fix potential memory leak in proto_register()
If protocols registered exceeded PROTO_INUSE_NR, prot will be
added to proto_list, but no available bit left for prot in
proto_inuse_idx.
Changes since v2:
* Propagate the error code properly
Signed-off-by: zhanglin <zhang.lin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 24 Aug 2019 23:27:09 +0000 (16:27 -0700)]
Merge tag 'mlx5-fixes-2019-08-22' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2019-08-22
This series introduces some fixes to mlx5 driver.
1) Form Moshe, two fixes for firmware health reporter
2) From Eran, two ktls fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sat, 24 Aug 2019 22:34:54 +0000 (00:34 +0200)]
MAINTAINERS: Add phylink keyword to SFF/SFP/SFP+ MODULE SUPPORT
Russell king maintains phylink, as part of the SFP module support.
However, much of the review work is about drivers swapping from phylib
to phylink. Such changes don't make changes to the phylink core, and
so the F: rules in MAINTAINERS don't match. Add a K:, keywork rule,
which hopefully get_maintainers will match against for patches to MAC
drivers swapping to phylink.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 24 Aug 2019 21:49:36 +0000 (14:49 -0700)]
Merge branch 'collect_md-mode-dev-null'
Hangbin Liu says:
====================
fix dev null pointer dereference when send packets larger than mtu in collect_md mode
When we send a packet larger than PMTU, we need to reply with
icmp_send(ICMP_FRAG_NEEDED) or icmpv6_send(ICMPV6_PKT_TOOBIG).
But with collect_md mode, kernel will crash while accessing the dst dev
as __metadata_dst_init() init dst->dev to NULL by default. Here is what
the code path looks like, for GRE:
- ip6gre_tunnel_xmit
- ip6gre_xmit_ipv4
- __gre6_xmit
- ip6_tnl_xmit
- if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE
- icmp_send
- net = dev_net(rt->dst.dev); <-- here
- ip6gre_xmit_ipv6
- __gre6_xmit
- ip6_tnl_xmit
- if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE
- icmpv6_send
...
- decode_session4
- oif = skb_dst(skb)->dev->ifindex; <-- here
- decode_session6
- oif = skb_dst(skb)->dev->ifindex; <-- here
We could not fix it in __metadata_dst_init() as there is no dev supplied.
Look in to the __icmp_send()/decode_session{4,6} code we could find the dst
dev is actually not needed. In __icmp_send(), we could get the net by skb->dev.
For decode_session{4,6}, as it was called by xfrm_decode_session_reverse()
in this scenario, the oif is not used by
fl4->flowi4_oif = reverse ? skb->skb_iif : oif;
The reproducer is easy:
ovs-vsctl add-br br0
ip link set br0 up
ovs-vsctl add-port br0 gre0 -- set interface gre0 type=gre options:remote_ip=$dst_addr
ip link set gre0 up
ip addr add ${local_gre6}/64 dev br0
ping6 $remote_gre6 -s 1500
The kernel will crash like
[40595.821651] BUG: kernel NULL pointer dereference, address:
0000000000000108
[40595.822411] #PF: supervisor read access in kernel mode
[40595.822949] #PF: error_code(0x0000) - not-present page
[40595.823492] PGD 0 P4D 0
[40595.823767] Oops: 0000 [#1] SMP PTI
[40595.824139] CPU: 0 PID: 2831 Comm: handler12 Not tainted 5.2.0 #57
[40595.824788] Hardware name: Red Hat KVM, BIOS 1.11.1-3.module+el8.1.0+2983+
b2ae9c0a 04/01/2014
[40595.825680] RIP: 0010:__xfrm_decode_session+0x6b/0x930
[40595.826219] Code: b7 c0 00 00 00 b8 06 00 00 00 66 85 d2 0f b7 ca 48 0f 45 c1 44 0f b6 2c 06 48 8b 47 58 48 83 e0 fe 0f 84 f4 04 00 00 48 8b 00 <44> 8b 80 08 01 00 00 41 f6 c4 01 4c 89 e7
ba 58 00 00 00 0f 85 47
[40595.828155] RSP: 0018:
ffffc90000a73438 EFLAGS:
00010286
[40595.828705] RAX:
0000000000000000 RBX:
ffff8881329d7100 RCX:
0000000000000000
[40595.829450] RDX:
0000000000000000 RSI:
ffff8881339e70ce RDI:
ffff8881329d7100
[40595.830191] RBP:
ffffc90000a73470 R08:
0000000000000000 R09:
000000000000000a
[40595.830936] R10:
0000000000000000 R11:
0000000000000000 R12:
ffffc90000a73490
[40595.831682] R13:
000000000000002c R14:
ffff888132ff1301 R15:
ffff8881329d7100
[40595.832427] FS:
00007f5bfcfd6700(0000) GS:
ffff88813ba00000(0000) knlGS:
0000000000000000
[40595.833266] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[40595.833883] CR2:
0000000000000108 CR3:
000000013a368000 CR4:
00000000000006f0
[40595.834633] Call Trace:
[40595.835392] ? rt6_multipath_hash+0x4c/0x390
[40595.835853] icmpv6_route_lookup+0xcb/0x1d0
[40595.836296] ? icmpv6_xrlim_allow+0x3e/0x140
[40595.836751] icmp6_send+0x537/0x840
[40595.837125] icmpv6_send+0x20/0x30
[40595.837494] tnl_update_pmtu.isra.27+0x19d/0x2a0 [ip_tunnel]
[40595.838088] ip_md_tunnel_xmit+0x1b6/0x510 [ip_tunnel]
[40595.838633] gre_tap_xmit+0x10c/0x160 [ip_gre]
[40595.839103] dev_hard_start_xmit+0x93/0x200
[40595.839551] sch_direct_xmit+0x101/0x2d0
[40595.839967] __dev_queue_xmit+0x69f/0x9c0
[40595.840399] do_execute_actions+0x1717/0x1910 [openvswitch]
[40595.840987] ? validate_set.isra.12+0x2f5/0x3d0 [openvswitch]
[40595.841596] ? reserve_sfa_size+0x31/0x130 [openvswitch]
[40595.842154] ? __ovs_nla_copy_actions+0x1b4/0xad0 [openvswitch]
[40595.842778] ? __kmalloc_reserve.isra.50+0x2e/0x80
[40595.843285] ? should_failslab+0xa/0x20
[40595.843696] ? __kmalloc+0x188/0x220
[40595.844078] ? __alloc_skb+0x97/0x270
[40595.844472] ovs_execute_actions+0x47/0x120 [openvswitch]
[40595.845041] ovs_packet_cmd_execute+0x27d/0x2b0 [openvswitch]
[40595.845648] genl_family_rcv_msg+0x3a8/0x430
[40595.846101] genl_rcv_msg+0x47/0x90
[40595.846476] ? __alloc_skb+0x83/0x270
[40595.846866] ? genl_family_rcv_msg+0x430/0x430
[40595.847335] netlink_rcv_skb+0xcb/0x100
[40595.847777] genl_rcv+0x24/0x40
[40595.848113] netlink_unicast+0x17f/0x230
[40595.848535] netlink_sendmsg+0x2ed/0x3e0
[40595.848951] sock_sendmsg+0x4f/0x60
[40595.849323] ___sys_sendmsg+0x2bd/0x2e0
[40595.849733] ? sock_poll+0x6f/0xb0
[40595.850098] ? ep_scan_ready_list.isra.14+0x20b/0x240
[40595.850634] ? _cond_resched+0x15/0x30
[40595.851032] ? ep_poll+0x11b/0x440
[40595.851401] ? _copy_to_user+0x22/0x30
[40595.851799] __sys_sendmsg+0x58/0xa0
[40595.852180] do_syscall_64+0x5b/0x190
[40595.852574] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[40595.853105] RIP: 0033:0x7f5c00038c7d
[40595.853489] Code: c7 20 00 00 75 10 b8 2e 00 00 00 0f 05 48 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 8e f7 ff ff 48 89 04 24 b8 2e 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 d7 f7 ff ff 48 89
d0 48 83 c4 08 48 3d 01
[40595.855443] RSP: 002b:
00007f5bfcf73c00 EFLAGS:
00003293 ORIG_RAX:
000000000000002e
[40595.856244] RAX:
ffffffffffffffda RBX:
00007f5bfcf74a60 RCX:
00007f5c00038c7d
[40595.856990] RDX:
0000000000000000 RSI:
00007f5bfcf73c60 RDI:
0000000000000015
[40595.857736] RBP:
0000000000000004 R08:
0000000000000b7c R09:
0000000000000110
[40595.858613] R10:
0001000800050004 R11:
0000000000003293 R12:
000055c2d8329da0
[40595.859401] R13:
00007f5bfcf74120 R14:
0000000000000347 R15:
00007f5bfcf73c60
[40595.860185] Modules linked in: ip_gre ip_tunnel gre openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 sunrpc bochs_drm ttm drm_kms_helper drm pcspkr joydev i2c_piix4 qemu_fw_cfg xfs libcrc32c virtio_net net_failover serio_raw failover ata_generic virtio_blk pata_acpi floppy
[40595.863155] CR2:
0000000000000108
[40595.863551] ---[ end trace
22209bbcacb4addd ]---
v4: Julian Anastasov remind skb->dev also could be NULL in icmp_send. We'd
better still use dst.dev and do a check to avoid crash.
v3: only replace pkg to packets in cover letter. So I didn't update the version
info in the follow up patches.
v2: fix it in __icmp_send() and decode_session{4,6} separately instead of
updating shared dst dev in {ip_md, ip6}_tunnel_xmit.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Thu, 22 Aug 2019 14:19:49 +0000 (22:19 +0800)]
xfrm/xfrm_policy: fix dst dev null pointer dereference in collect_md mode
In decode_session{4,6} there is a possibility that the skb dst dev is NULL,
e,g, with tunnel collect_md mode, which will cause kernel crash.
Here is what the code path looks like, for GRE:
- ip6gre_tunnel_xmit
- ip6gre_xmit_ipv6
- __gre6_xmit
- ip6_tnl_xmit
- if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE
- icmpv6_send
- icmpv6_route_lookup
- xfrm_decode_session_reverse
- decode_session4
- oif = skb_dst(skb)->dev->ifindex; <-- here
- decode_session6
- oif = skb_dst(skb)->dev->ifindex; <-- here
The reason is __metadata_dst_init() init dst->dev to NULL by default.
We could not fix it in __metadata_dst_init() as there is no dev supplied.
On the other hand, the skb_dst(skb)->dev is actually not needed as we
called decode_session{4,6} via xfrm_decode_session_reverse(), so oif is not
used by: fl4->flowi4_oif = reverse ? skb->skb_iif : oif;
So make a dst dev check here should be clean and safe.
v4: No changes.
v3: No changes.
v2: fix the issue in decode_session{4,6} instead of updating shared dst dev
in {ip_md, ip6}_tunnel_xmit.
Fixes:
8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Thu, 22 Aug 2019 14:19:48 +0000 (22:19 +0800)]
ipv4/icmp: fix rt dst dev null pointer dereference
In __icmp_send() there is a possibility that the rt->dst.dev is NULL,
e,g, with tunnel collect_md mode, which will cause kernel crash.
Here is what the code path looks like, for GRE:
- ip6gre_tunnel_xmit
- ip6gre_xmit_ipv4
- __gre6_xmit
- ip6_tnl_xmit
- if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE
- icmp_send
- net = dev_net(rt->dst.dev); <-- here
The reason is __metadata_dst_init() init dst->dev to NULL by default.
We could not fix it in __metadata_dst_init() as there is no dev supplied.
On the other hand, the reason we need rt->dst.dev is to get the net.
So we can just try get it from skb->dev when rt->dst.dev is NULL.
v4: Julian Anastasov remind skb->dev also could be NULL. We'd better
still use dst.dev and do a check to avoid crash.
v3: No changes.
v2: fix the issue in __icmp_send() instead of updating shared dst dev
in {ip_md, ip6}_tunnel_xmit.
Fixes:
c8b34e680a09 ("ip_tunnel: Add tnl_update_pmtu in ip_md_tunnel_xmit")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 24 Aug 2019 21:45:33 +0000 (14:45 -0700)]
Merge tag 'gpio-v5.3-4' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here is a (hopefully last) set of GPIO fixes for the v5.3 kernel
cycle. Two are pretty core:
- Fix not reporting open drain/source lines to userspace as "input"
- Fix a minor build error found in randconfigs
- Fix a chip select quirk on the Freescale SPI
- Fix the irqchip initialization semantic order to reflect what it
was using the old API"
* tag 'gpio-v5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: Fix irqchip initialization order
gpio: of: fix Freescale SPI CS quirk handling
gpio: Fix build error of function redefinition
gpiolib: never report open-drain/source lines as 'input' to user-space
Yi-Hung Wei [Thu, 22 Aug 2019 00:16:10 +0000 (17:16 -0700)]
openvswitch: Fix log message in ovs conntrack
Fixes:
06bd2bdf19d2 ("openvswitch: Add timeout support to ct action")
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 24 Aug 2019 20:46:57 +0000 (13:46 -0700)]
Merge branch 'ieee802154-for-davem-2019-08-24' of git://git./linux/kernel/git/sschmidt/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2019-08-24
An update from ieee802154 for your *net* tree.
Yue Haibing fixed two bugs discovered by KASAN in the hwsim driver for
ieee802154 and Colin Ian King cleaned up a redundant variable assignment.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 24 Aug 2019 18:42:06 +0000 (11:42 -0700)]
Merge tag 'hyperv-fixes-signed' of git://git./linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Sasha Levin:
- Fix for panics and network failures on PAE guests by Dexuan Cui.
- Fix of a memory leak (and related cleanups) in the hyper-v keyboard
driver by Dexuan Cui.
- Code cleanups for hyper-v clocksource driver during the merge window
by Dexuan Cui.
- Fix for a false positive warning in the userspace hyper-v KVP store
by Vitaly Kuznetsov.
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Fix virt_to_hvpfn() for X86_PAE
Tools: hv: kvp: eliminate 'may be used uninitialized' warning
Input: hyperv-keyboard: Use in-place iterator API in the channel callback
Drivers: hv: vmbus: Remove the unused "tsc_page" from struct hv_context
Linus Torvalds [Sat, 24 Aug 2019 18:35:25 +0000 (11:35 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Two KVM/arm fixes for MMIO emulation and UBSAN.
Unusually, we're routing them via the arm64 tree as per Paolo's
request on the list:
https://lore.kernel.org/kvm/
21ae69a2-2546-29d0-bff6-
2ea825e3d968@redhat.com/
We don't actually have any other arm64 fixes pending at the moment
(touch wood), so I've pulled from Marc, written a merge commit, tagged
the result and run it through my build/boot/bisect scripts"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
KVM: arm/arm64: VGIC: Properly initialise private IRQ affinity
KVM: arm/arm64: Only skip MMIO insn once
Linus Torvalds [Sat, 24 Aug 2019 18:26:51 +0000 (11:26 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four fixes, three for edge conditions which don't occur very often.
The lpfc fix mitigates memory exhaustion for some high CPU systems"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Mitigate high memory pre-allocation by SCSI-MQ
scsi: ufs: Fix NULL pointer dereference in ufshcd_config_vreg_hpm()
scsi: target: tcmu: avoid use-after-free after command timeout
scsi: qla2xxx: Fix gnl.l memory leak on adapter init failure
Linus Torvalds [Sat, 24 Aug 2019 18:21:26 +0000 (11:21 -0700)]
Merge tag 'xfs-5.3-fixes-6' of git://git./fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"A single patch that fixes a xfs lockup problem when a chown/chgrp
operation fails due to running out of quota. It has survived the usual
xfstests runs and merges cleanly with this morning's master:
- Fix a forgotten inode unlock when chown/chgrp fail due to quota"
* tag 'xfs-5.3-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix missing ILOCK unlock when xfs_setattr_nonsize fails due to EDQUOT
Linus Torvalds [Sat, 24 Aug 2019 18:16:04 +0000 (11:16 -0700)]
Merge tag 'drm-fixes-2019-08-24' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"Although the tree built for me fine on arm here, it appears either
header cleanups in next or some kconfig combo it breaks, so this
contains a fix to mediatek to include dma-mapping.h explicitly.
There was also one nouveau fix that came in late that I was going to
leave until next week, but since I was sending this I thought it may
as well be in here:
mediatek:
- fix build in some cases
nouveau:
- fix hang with i2c and mst docks"
* tag 'drm-fixes-2019-08-24' of git://anongit.freedesktop.org/drm/drm:
drm/mediatek: include dma-mapping header
drm/nouveau: Don't retry infinitely when receiving no data on i2c over AUX