OSDN Git Service
Junio C Hamano [Wed, 26 Aug 2009 19:15:15 +0000 (12:15 -0700)]
Merge branch 'maint'
* maint:
git-log: allow --decorate[=short|full]
Minor improvement to the write-tree documentation
git-bisect: call the found commit "*the* first bad commit"
Lars Hjemli [Sat, 15 Aug 2009 14:23:12 +0000 (16:23 +0200)]
git-log: allow --decorate[=short|full]
Commit
de435ac0 changed the behavior of --decorate from printing the
full ref (e.g., "refs/heads/master") to a shorter, more human-readable
version (e.g., just "master"). While this is nice for human readers,
external tools using the output from "git log" may prefer the full
version.
This patch introduces an extension to --decorate to allow the caller to
specify either the short or the full versions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Kågedal [Wed, 26 Aug 2009 14:04:54 +0000 (16:04 +0200)]
Minor improvement to the write-tree documentation
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nanako Shiraishi [Wed, 26 Aug 2009 08:38:50 +0000 (17:38 +0900)]
git-bisect: call the found commit "*the* first bad commit"
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 26 Aug 2009 19:05:57 +0000 (12:05 -0700)]
Merge branch 'js/maint-cover-letter-non-ascii' into maint
* js/maint-cover-letter-non-ascii:
Correctly mark cover letters' encodings if they are not pure ASCII
Expose the has_non_ascii() function
Junio C Hamano [Wed, 26 Aug 2009 19:05:57 +0000 (12:05 -0700)]
Merge branch 'jc/maint-clean-nested-dir-safety' into maint
* jc/maint-clean-nested-dir-safety:
clean: require double -f options to nuke nested git repository and work tree
Junio C Hamano [Wed, 26 Aug 2009 19:05:57 +0000 (12:05 -0700)]
Merge branch 'jk/maint-merge-msg-fix' into maint
* jk/maint-merge-msg-fix:
merge: indicate remote tracking branches in merge message
merge: fix incorrect merge message for ambiguous tag/branch
add tests for merge message headings
Junio C Hamano [Wed, 26 Aug 2009 19:05:57 +0000 (12:05 -0700)]
Merge branch 'jc/apply-epoch-patch' into maint
* jc/apply-epoch-patch:
apply: notice creation/removal patches produced by GNU diff
Junio C Hamano [Wed, 26 Aug 2009 19:05:57 +0000 (12:05 -0700)]
Merge branch 'jp/symlink-dirs' into maint
* jp/symlink-dirs:
t6035-merge-dir-to-symlink depends on SYMLINKS prerequisite
git-checkout: be careful about untracked symlinks
lstat_cache: guard against full match of length of 'name' parameter
Demonstrate bugs when a directory is replaced with a symlink
Junio C Hamano [Wed, 26 Aug 2009 19:05:57 +0000 (12:05 -0700)]
Merge branch 'maint-1.6.3' into maint
* maint-1.6.3:
add -p: do not attempt to coalesce mode changes
git add -p: demonstrate failure when staging both mode and hunk
Junio C Hamano [Wed, 26 Aug 2009 18:22:00 +0000 (11:22 -0700)]
Merge branch 'tr/maint-1.6.3-add-p-modeonly-fix' into maint-1.6.3
* tr/maint-1.6.3-add-p-modeonly-fix:
add -p: do not attempt to coalesce mode changes
git add -p: demonstrate failure when staging both mode and hunk
Junio C Hamano [Tue, 25 Aug 2009 21:48:15 +0000 (14:48 -0700)]
Merge branch 'aj/fix-read-tree-from-scratch'
* aj/fix-read-tree-from-scratch:
read-tree: Fix regression with creation of a new index file.
Junio C Hamano [Tue, 25 Aug 2009 21:47:56 +0000 (14:47 -0700)]
Merge branch 'jc/maint-checkout-index-to-prefix'
* jc/maint-checkout-index-to-prefix:
check_path(): allow symlinked directories to checkout-index --prefix
Junio C Hamano [Tue, 25 Aug 2009 21:46:43 +0000 (14:46 -0700)]
Merge branch 'jl/submodule-summary-diff-files'
* jl/submodule-summary-diff-files:
Documentaqtion/git-submodule.txt: Typofix
git submodule summary: add --files option
Junio C Hamano [Tue, 25 Aug 2009 21:46:12 +0000 (14:46 -0700)]
Merge branch 'lh/short-decorate'
* lh/short-decorate:
git-log: allow --decorate[=short|full]
Junio C Hamano [Tue, 25 Aug 2009 21:46:04 +0000 (14:46 -0700)]
Merge branch 'oa/stash-na'
* oa/stash-na:
git stash: Give friendlier errors when there is nothing to apply
Nanako Shiraishi [Sat, 22 Aug 2009 00:45:18 +0000 (09:45 +0900)]
Documentation: consistently refer to check-ref-format
Change the <name> placeholder to <tagname> in the SYNOPSIS section of
git-tag documentation, and describe it in the OPTIONS section in a way
similar to how documentation for git-branch does.
Add SEE ALSO section to list the other documentation pages these two pages
refer to.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 24 Aug 2009 00:19:19 +0000 (17:19 -0700)]
Merge branch 'jc/verify-pack-stat'
* jc/verify-pack-stat:
verify-pack --stat-only: show histogram without verifying
Junio C Hamano [Mon, 24 Aug 2009 00:19:06 +0000 (17:19 -0700)]
Merge branch 'mr/gitweb-xz'
* mr/gitweb-xz:
gitweb: add support for XZ compressed snapshots
gitweb: update INSTALL regarding specific snapshot settings
gitweb: support to globally disable a snapshot format
Junio C Hamano [Mon, 24 Aug 2009 00:18:52 +0000 (17:18 -0700)]
Merge branch 'ld/p4'
* ld/p4:
git-p4: stream from perforce to speed up clones
Giuseppe Bilotta [Sun, 23 Aug 2009 08:28:09 +0000 (10:28 +0200)]
gitweb: pull ref markes pull out of subject <a> element
Since
4afbaef (gitweb: ref markers link to named shortlogs, 2008-09-02),
ref markers that accompany the subject in views such as shortlog and
history point to something different from the subject itself. Therefore,
they should not be included in the same <a> element.
Benefits of the change are:
* better compliance to the XHTML standards, that forbid links within
links even though the restriction cannot be imposed via DTD; this also
benefits visualization in some older browsers;
* when hovering the subject, only the subject itself is underlined; when
hovering the ref markers, only the text in the hovered ref marker is
underlined; previously, hovering any written part of the subject column
led to complete underlying of everything at the same time, with
unpleasing effects.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 22 Aug 2009 03:23:10 +0000 (20:23 -0700)]
Sync with 1.6.4.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 21 Aug 2009 19:02:25 +0000 (12:02 -0700)]
GIT 1.6.4.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 22 Aug 2009 01:51:30 +0000 (18:51 -0700)]
Merge branch 'bc/maint-am-email' into maint
* bc/maint-am-email:
git-am: print fair error message when format detection fails
am: allow individual e-mail files as input
Junio C Hamano [Fri, 21 Aug 2009 22:13:21 +0000 (15:13 -0700)]
compat/snprintf.c: clarify SNPRINTF_SIZE_CORR
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 22 Aug 2009 01:47:53 +0000 (18:47 -0700)]
Merge branch 'cc/replace'
* cc/replace:
t6050: check pushing something based on a replaced commit
Documentation: add documentation for "git replace"
Add git-replace to .gitignore
builtin-replace: use "usage_msg_opt" to give better error messages
parse-options: add new function "usage_msg_opt"
builtin-replace: teach "git replace" to actually replace
Add new "git replace" command
environment: add global variable to disable replacement
mktag: call "check_sha1_signature" with the replacement sha1
replace_object: add a test case
object: call "check_sha1_signature" with the replacement sha1
sha1_file: add a "read_sha1_file_repl" function
replace_object: add mechanism to replace objects found in "refs/replace/"
refs: add a "for_each_replace_ref" function
Junio C Hamano [Sat, 22 Aug 2009 01:47:48 +0000 (18:47 -0700)]
Merge branch 'gb/apply-ignore-whitespace'
* gb/apply-ignore-whitespace:
git apply: option to ignore whitespace differences
Junio C Hamano [Sat, 22 Aug 2009 01:47:44 +0000 (18:47 -0700)]
Merge branch 'bc/mailsplit-cr-at-eol'
* bc/mailsplit-cr-at-eol:
Allow mailsplit (and hence git-am) to handle mails with CRLF line-endings
builtin-mailsplit.c: remove read_line_with_nul() since it is no longer used
builtin-mailinfo,builtin-mailsplit: use strbufs
strbuf: add new function strbuf_getwholeline()
Junio C Hamano [Fri, 21 Aug 2009 18:34:24 +0000 (11:34 -0700)]
Merge branch 'jc/maint-merge-recursive-fix' into maint
* jc/maint-merge-recursive-fix:
merge-recursive: don't segfault while handling rename clashes
Junio C Hamano [Fri, 21 Aug 2009 18:34:17 +0000 (11:34 -0700)]
Merge branch 'zf/maint-gitweb-acname' into maint
* zf/maint-gitweb-acname:
gitweb: parse_commit_text encoding fix
Junio C Hamano [Fri, 21 Aug 2009 18:34:02 +0000 (11:34 -0700)]
Merge branch 'np/maint-limit-delta-cache' into maint
* np/maint-limit-delta-cache:
don't let the delta cache grow unbounded in 'git repack'
Junio C Hamano [Fri, 21 Aug 2009 18:33:54 +0000 (11:33 -0700)]
Merge branch 'jk/maint-show-tag' into maint
* jk/maint-show-tag:
show: add space between multiple items
show: suppress extra newline when showing annotated tag
Junio C Hamano [Fri, 21 Aug 2009 18:33:08 +0000 (11:33 -0700)]
Merge branch 'sb/maint-pull-rebase' into maint
* sb/maint-pull-rebase:
pull: support rebased upstream + fetch + pull --rebase
t5520-pull: Test for rebased upstream + fetch + pull --rebase
Johannes Sixt [Fri, 21 Aug 2009 08:32:25 +0000 (10:32 +0200)]
Make test number t7406- unique
We skip t7407 because a patch series is cooking that uses is.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 20 Aug 2009 01:27:08 +0000 (20:27 -0500)]
git-compat-util.h: remove superfluous test for __sun__
This 'ifndef' macro is entered only when __sun__ is not defined. This test
will never fail since it is located inside of the 'else' branch of an 'if'
macro which tests whether __sun__ is defined. It has had no effect since
the merge at
436f66b7.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 19 Aug 2009 06:33:16 +0000 (23:33 -0700)]
Merge branch 'rc/maint-http-fix'
* rc/maint-http-fix:
http.c: don't assume that urls don't end with slash
Junio C Hamano [Wed, 19 Aug 2009 06:32:58 +0000 (23:32 -0700)]
Merge branch 'tr/maint-1.6.3-add-p-modeonly-fix'
* tr/maint-1.6.3-add-p-modeonly-fix:
add -p: do not attempt to coalesce mode changes
git add -p: demonstrate failure when staging both mode and hunk
Adam Simpkins [Tue, 18 Aug 2009 21:41:12 +0000 (14:41 -0700)]
graph API: use a new color when starting a brand new column
Use a new color for commits that don't have any previously printed
children. The following command demonstrates the changes:
git log --graph --pretty=tformat:'%h %s%n' -7
481c7a6 18b0793
Now the two independent lines of development are displayed with
different colors, instead of both using the same color.
Signed-off-by: Adam Simpkins <simpkins@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Karthik R [Tue, 18 Aug 2009 23:54:40 +0000 (18:54 -0500)]
git-svn: Use GIT_SSH setting if SVN_SSH is not set
If SVN_SSH is defined, it will be used. Else value in
GIT_SSH is copied to SVN_SSH & then, only on Windows,
the \s are escaped.
On Windows, the shell-variables must be set as follows
GIT_SSH="C:\Program Files\PuTTY\plink.exe"
SVN_SSH="C:\\Program Files\\PuTTY\\plink.exe"
See http://code.google.com/p/msysgit/issues/detail?id=305
[ew: fixed indentation to use tabs]
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Karthik Rajagopalan <karthikr@fastmail.fm>
Eric Wong [Sun, 16 Aug 2009 21:22:12 +0000 (14:22 -0700)]
svn: assume URLs from the command-line are URI-encoded
And then unescape them when writing to $GIT_CONFIG.
SVN has different rules for repository URLs (usually the root)
and for paths within that repository (below the HTTP layer).
Thus, for the request URI path at the HTTP level, the URI needs
to be encoded. However, in the body of the HTTP request (the
with underlying SVN XML protocol), those paths should not be
URI-encoded[1]. For non-HTTP(S) requests, SVN appears to be
more flexible and will except weird characters in the URL as
well as URI-encoded ones.
Since users are used to using URLs being entirely URI-encoded,
git svn will now attempt to unescape the path portion of URLs
while leaving the actual repository URL untouched.
This change will be reflected in newly-created $GIT_CONFIG files
only. This allows users to switch between svn(+ssh)://, file://
and http(s):// urls without changing the fetch/branches/tags
config keys. This won't affect existing imports at all (since
things didn't work before this commit anyways), and will allow
users to force escaping into repository paths that look like
they're escaped (but are not).
Thanks to Mike Smullin for the original bug report and Björn
Steinbrink for summarizing it into testable cases for me.
[1] Except when committing copies/renames, see
commit
29633bb91c7bcff31ff3bb59378709e3e3ef627d
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Tuomas Suutari [Fri, 14 Aug 2009 08:11:58 +0000 (11:11 +0300)]
git-svn.txt: Fix location of parent argument
The note about interoperating in different timezones and such is about
localtime argument, not parent.
Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Junio C Hamano [Tue, 18 Aug 2009 21:40:10 +0000 (14:40 -0700)]
Merge branch 'maint'
* maint:
filter-branch: make the usage string fit on 80 chars terminals.
filter-branch: add an example how to add ACKs to a range of commits
docs: describe impact of repack on "clone -s"
Tay Ray Chuan [Mon, 17 Aug 2009 09:09:43 +0000 (17:09 +0800)]
http.c: don't assume that urls don't end with slash
Make append_remote_object_url() (and by implication,
get_remote_object_url) use end_url_with_slash() to ensure that the url
ends with a slash.
Previously, they assumed that the url did not end with a slash and
as a result appended a slash, sometimes errorneously.
This fixes an issue introduced in
5424bc5 ("http*: add helper methods
for fetching objects (loose)"), where the append_remote_object_url()
implementation in http-push.c, which assumed that urls end with a
slash, was replaced by another one in http.c, which assumed urls did
not end with a slash.
The above issue was raised by Thomas Schlichter:
http://marc.info/?l=git&m=
125043105231327
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Tested-by: Thomas Schlichter <thomas.schlichter@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthieu Moy [Tue, 18 Aug 2009 09:51:00 +0000 (11:51 +0200)]
filter-branch: make the usage string fit on 80 chars terminals.
It used to be a single, huge line, badly wrapped by xterm.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lars Hjemli [Sat, 15 Aug 2009 14:23:12 +0000 (16:23 +0200)]
git-log: allow --decorate[=short|full]
Commit
de435ac0 changed the behavior of --decorate from printing the
full ref (e.g., "refs/heads/master") to a shorter, more human-readable
version (e.g., just "master"). While this is nice for human readers,
external tools using the output from "git log" may prefer the full
version.
This patch introduces an extension to --decorate to allow the caller to
specify either the short or the full versions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Mon, 17 Aug 2009 20:38:46 +0000 (22:38 +0200)]
filter-branch: add an example how to add ACKs to a range of commits
When you have to add certain lines like ACKs (or for that matter,
Signed-off-by:s) to a range of commits starting with HEAD, you might
be tempted to use 'git rebase -i -10', but that is a waste of your
time.
It is better to use 'git filter-branch' with an appropriate message
filter, and this commit adds an example how to do so to
filter-branch's man page.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 17 Aug 2009 06:53:12 +0000 (23:53 -0700)]
check_path(): allow symlinked directories to checkout-index --prefix
Merlyn noticed that Documentation/install-doc-quick.sh no longer correctly
removes old installed documents when the target directory has a leading
path that is a symlink. It turns out that "checkout-index --prefix" was
broken by recent
b6986d8 (git-checkout: be careful about untracked
symlinks, 2009-07-29).
I suspect has_symlink_leading_path() could learn the third parameter
(prefix that is allowed to be symlinked directories) to allow us to retire
a similar function has_dirs_only_path().
Another avenue of fixing this I considered was to get rid of base_dir and
base_dir_len from "struct checkout", and instead make "git checkout-index"
when run with --prefix mkdir the leading path and chdir in there. It
might be the best longer term solution to this issue, as the base_dir
feature is used only by that rather obscure codepath as far as I know.
But at least this patch should fix this breakage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alexandre Julliard [Mon, 17 Aug 2009 15:35:44 +0000 (17:35 +0200)]
read-tree: Fix regression with creation of a new index file.
Reading the index into an empty file has been broken by
5a56da58060e50980fab0f4c38203a25440d1530, since it causes the existing
index to always be loaded first, and dies if it's an empty file:
$ GIT_INDEX_FILE=`mktemp` git read-tree master
fatal: index file smaller than expected
It breaks for instance committing from git.el. This patch reverts to the
previous behavior of only loading the index when merging it.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 17 Aug 2009 06:19:17 +0000 (02:19 -0400)]
docs: describe impact of repack on "clone -s"
The effects of repacking on a repository with alternates are a bit
subtle. The two main things users will want are:
1. Not to waste disk space by accidentally copying objects which could
be shared.
2. Copying all objects explicitly to break the dependency on the source
repo.
This patch describes both under the "clone -s" documentation. It makes
sense to put it there rather than in git-repack.txt for both cases.
For (1), we are warning the user who is using "clone -s" about what _not_
to do, so we need to get their attention when reading about "clone -s".
For (2), we are telling them how git-repack can be used to accomplish a
task, but until they know that git-repack is the right tool, they have no
reason to look at the repack documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 16 Aug 2009 11:14:32 +0000 (04:14 -0700)]
Merge branch 'lt/block-sha1'
* lt/block-sha1:
block-sha1/sha1.c: silence compiler complaints by casting void * to char *
block-sha1: more good unaligned memory access candidates
block-sha1: support for architectures with memory alignment restrictions
block-sha1: split the different "hacks" to be individually selected
block-sha1: move code around
block-sha1: improve code on large-register-set machines
block-sha1: improved SHA1 hashing
block-sha1: perform register rotation using cpp
block-sha1: get rid of redundant 'lenW' context
block-sha1: Use '(B&C)+(D&(B^C))' instead of '(B&C)|(D&(B|C))' in round 3
block-sha1: macroize the rounds a bit further
block-sha1: re-use the temporary array as we calculate the SHA1
block-sha1: make the 'ntohl()' part of the first SHA1 loop
block-sha1: minor fixups
block-sha1: try to use rol/ror appropriately
block-sha1: undo ctx->size change
Add new optimized C 'block-sha1' routines
Junio C Hamano [Sun, 16 Aug 2009 11:13:22 +0000 (04:13 -0700)]
Merge branch 'bc/maint-am-email'
* bc/maint-am-email:
git-am: print fair error message when format detection fails
am: allow individual e-mail files as input
Junio C Hamano [Sun, 16 Aug 2009 11:13:18 +0000 (04:13 -0700)]
Merge branch 'js/maint-cover-letter-non-ascii'
* js/maint-cover-letter-non-ascii:
Correctly mark cover letters' encodings if they are not pure ASCII
Expose the has_non_ascii() function
Junio C Hamano [Sun, 16 Aug 2009 11:13:13 +0000 (04:13 -0700)]
Merge branch 'jc/maint-clean-nested-dir-safety'
* jc/maint-clean-nested-dir-safety:
clean: require double -f options to nuke nested git repository and work tree
Junio C Hamano [Sun, 16 Aug 2009 11:13:04 +0000 (04:13 -0700)]
Merge branch 'jk/maint-merge-msg-fix'
* jk/maint-merge-msg-fix:
merge: indicate remote tracking branches in merge message
merge: fix incorrect merge message for ambiguous tag/branch
add tests for merge message headings
Junio C Hamano [Sun, 16 Aug 2009 10:46:51 +0000 (03:46 -0700)]
Merge git://git.kernel.org/pub/scm/gitk/gitk
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Parse arbitrary commit-ish in SHA1 field
gitk: Fix direction of symmetric difference in optimized mode
gitk: New option to hide remote refs
gitk: Do not hard-code "encoding" in attribute lookup functions
Thomas Rast [Sat, 15 Aug 2009 13:56:39 +0000 (15:56 +0200)]
add -p: do not attempt to coalesce mode changes
In
0392513 (add-interactive: refactor mode hunk handling, 2009-04-16),
we merged the interaction loops for mode changes and hunk staging.
This was fine at the time, because
0beee4c (git-add--interactive:
remove hunk coalescing, 2008-07-02) removed hunk coalescing.
However, in
7a26e65 (Revert "git-add--interactive: remove hunk
coalescing", 2009-05-16), we resurrected it. Since then, the code
would attempt in vain to merge mode changes with diff hunks,
corrupting both in the process.
We add a check to the coalescing loop to ensure it only looks at diff
hunks, thus skipping mode changes.
Noticed-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kirill Smelkov [Sat, 15 Aug 2009 12:26:49 +0000 (16:26 +0400)]
git add -p: demonstrate failure when staging both mode and hunk
When trying to stage changes to file which has also pending `chmod +x`,
`git add -p` produces lots of 'Use of uninitialized value ...' warnings
and fails to do the job:
$ echo content >> file
$ chmod +x file
$ git add -p
diff --git a/file b/file
index
e69de29..
d95f3ad
--- a/file
+++ b/file
old mode 100644
new mode 100755
Stage mode change [y,n,q,a,d,/,j,J,g,?]? y
@@ -0,0 +1 @@
+content
Stage this hunk [y,n,q,a,d,/,K,g,e,?]? y
Use of uninitialized value $o_ofs in addition (+) at .../git-add--interactive line 776.
Use of uninitialized value $ofs in numeric le (<=) at .../git-add--interactive line 806.
Use of uninitialized value $o0_ofs in concatenation (.) or string at .../git-add--interactive line 830.
Use of uninitialized value $n0_ofs in concatenation (.) or string at .../git-add--interactive line 830.
Use of uninitialized value $o_ofs in addition (+) at .../git-add--interactive line 776.
fatal: corrupt patch at line 5
diff --git a/file b/file
index
e69de29..
d95f3ad
--- a/file
+++ b/file
@@ -,0 + @@
+content
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lars Hjemli [Sat, 15 Aug 2009 08:40:42 +0000 (10:40 +0200)]
Documentaqtion/git-submodule.txt: Typofix
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jens Lehmann [Thu, 13 Aug 2009 19:32:50 +0000 (21:32 +0200)]
git submodule summary: add --files option
git submodule summary is providing similar functionality for submodules as
git diff-index does for a git project (including the meaning of --cached).
But the analogon to git diff-files is missing, so add a --files option to
summarize the differences between the index of the super project and the
last commit checked out in the working tree of the submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dirk Hoerner [Fri, 14 Aug 2009 06:58:31 +0000 (08:58 +0200)]
git-cvsimport: add support for cvs pserver password scrambling.
Instead of a cleartext password, the CVS pserver expects a scrambled one
in the authentication request. With this patch it is possible to import
CVS repositories only accessible via pserver and user/password.
Signed-off-by: Dirk Hoerner <dirker@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Benjamin Kramer [Mon, 10 Aug 2009 12:09:00 +0000 (14:09 +0200)]
gitweb: Optimize git-favicon.png
Reduce size of git-favicon.png using a combination of optipng and
pngout. From 164 bytes to 115 bytes (30% reduction). Also reduce
git-logo.png's size by one byte using advcomp.
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ori Avtalion [Tue, 11 Aug 2009 11:12:13 +0000 (14:12 +0300)]
git stash: Give friendlier errors when there is nothing to apply
The change makes sure a stash (given or default) exists before
checking if the working tree is dirty.
If the default stash is requested, the old message was scary and
included a 'fatal' error from rev-parse:
fatal: Needed a single revision
: no valid stashed state found
It is replaced with a friendlier 'Nothing to apply' error, similar to
'git stash branch'.
If a specific stash is specified, the 'Needed a single revision' errors
from rev-parse are suppressed.
Signed-off-by: Ori Avtalion <ori@avtalion.name>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Fri, 14 Aug 2009 22:52:15 +0000 (17:52 -0500)]
block-sha1/sha1.c: silence compiler complaints by casting void * to char *
Some compilers produce errors when arithmetic is attempted on pointers to
void. We want computations done on byte addresses, so cast them to char *
to work them around.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 14 Aug 2009 23:32:52 +0000 (16:32 -0700)]
Merge branch 'jn/gitweb-blame' (early part)
* 'jn/gitweb-blame' (early part):
gitweb: Use light/dark for class names also in 'blame' view
gitweb: Add author initials in 'blame' view, a la "git gui blame"
gitweb: Mark commits with no "previous" in 'blame' view
gitweb: Use "previous" header of git-blame -p in 'blame' view
gitweb: Mark boundary commits in 'blame' view
gitweb: Make .error style generic
Nicolas Pitre [Thu, 13 Aug 2009 04:29:14 +0000 (00:29 -0400)]
block-sha1: more good unaligned memory access candidates
In addition to X86, PowerPC and S390 are capable of unaligned memory
accesses.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Thu, 13 Aug 2009 07:25:03 +0000 (09:25 +0200)]
gitk: Parse arbitrary commit-ish in SHA1 field
We only accepted either SHA1s or heads/tags that have been read. This
meant the user could not, e.g., enter HEAD to go back to the current
commit.
This adds code to call out to git rev-parse --verify if all other
methods of interpreting the string the user entered fail.
(git-rev-parse alone is not enough as we really want a single
revision.)
The error paths change slighly, because we now know from the rev-parse
invocation whether the expression was valid at all. The previous
"unknown" path is now only triggered if the revision does exist, but
is not in the current view display.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Thomas Rast [Wed, 5 Aug 2009 21:15:36 +0000 (23:15 +0200)]
gitk: Fix direction of symmetric difference in optimized mode
ee66e08 (gitk: Make updates go faster, 2008-05-09) implemented an
optimized mode where gitk parses the arguments with rev-parse, and
manually reads history in chunks. As mentioned in the commit message,
symmetric differences are a problem there:
One wrinkle is that we have to turn symmetric diff arguments (of the
form a...b) back into symmetric diff form so that --left-right still
works, as git rev parse turns a...b into a b ^merge_base(a,b).
However, git-rev-parse returns a...b in the swapped order
b a ^merge_base(a,b)
This has been the case since at least
1f8115b (the state of master at
the time of the abovementioned
ee66e08; Merge branch 'maint',
2008-05-08). So gitk flipped the sides of symmetric differences
whenever it was in optimized mode.
Fix this by swapping the sides of the reconstruction code.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Thomas Rast [Mon, 3 Aug 2009 21:53:36 +0000 (23:53 +0200)]
gitk: New option to hide remote refs
In repositories with lots of remotes, looking at the history in gitk
can be borderline insane with all the red labels for remote refs.
Introduce a new option in the preferences that makes gitk ignore
remote refs entirely, so they don't take up space in the display.
Wished-for-by: Thell Fowler <tbfowler4@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Johannes Sixt [Tue, 21 Jul 2009 08:09:48 +0000 (10:09 +0200)]
gitk: Do not hard-code "encoding" in attribute lookup functions
Commit
39ee47e (Clean up file encoding code and add enable/disable option,
2008-10-15) rewrote the attribute lookup functions gitattr and
cache_gitattr, but in the process hard-coded the attribute name "encoding"
instead of using the functions' parameters. This fixes it.
This is not a serious regression because currently all callers look only
for "encoding".
Further note that this fix assumes that future callers will not pass an
attribute name that contains regex special characters.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Eric Wong [Thu, 13 Aug 2009 05:20:02 +0000 (22:20 -0700)]
svn: (cleanup) use predefined constant for rev_map_fmt
This makes life easier in case we ever need to change the
internal format of the rev_maps.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Adam Brewster [Wed, 12 Aug 2009 03:14:27 +0000 (23:14 -0400)]
svn: allow branches outside of refs/remotes
It may be convenient for some users to store svn remote tracking
branches outside of the refs/remotes/ heirarchy.
To accomplish this feat, this patch includes the entire path to
the ref in $r->{'refname'} in &read_all_remotes and tries to change
references to this entry so the new value makes sense.
[ew: fixed backwards compatibility, long lines]
Signed-off-by: Adam Brewster <adambrewster@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Eric Wong [Wed, 12 Aug 2009 23:01:59 +0000 (16:01 -0700)]
svn: initial "master" points to trunk if possible
Since "trunk" is a convention for the main development branch in
the SVN world, try to make that the master branch upon initial
checkout if it exists. This is probably less surprising based
on user requests.
t9135 was the only test which relied on the previous behavior
and thus needed to be modified.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Junio C Hamano [Wed, 12 Aug 2009 23:36:04 +0000 (16:36 -0700)]
Merge branch 'maint'
* maint:
push: point to 'git pull' and 'git push --force' in case of non-fast forward
Documentation: add: <filepattern>... is optional
Change mentions of "git programs" to "git commands"
Documentation: merge: one <remote> is required
help.c: give correct structure's size to memset()
Junio C Hamano [Wed, 12 Aug 2009 23:15:55 +0000 (16:15 -0700)]
Merge branch 'maint-1.6.3' into maint
* maint-1.6.3:
Change mentions of "git programs" to "git commands"
Documentation: merge: one <remote> is required
help.c: give correct structure's size to memset()
Matthieu Moy [Sat, 8 Aug 2009 07:51:08 +0000 (09:51 +0200)]
push: point to 'git pull' and 'git push --force' in case of non-fast forward
'git push' failing because of non-fast forward is a very common situation,
and a beginner does not necessarily understand "fast forward" immediately.
Add a new section to the git-push documentation and refer them to it.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paul Bolle [Tue, 11 Aug 2009 13:03:10 +0000 (15:03 +0200)]
Documentation: add: <filepattern>... is optional
<filepattern>... is optional (e.g. when the --all or --update
options are used) so use square brackets in the synopsis.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ori Avtalion [Fri, 7 Aug 2009 14:24:21 +0000 (17:24 +0300)]
Change mentions of "git programs" to "git commands"
Most of the docs and printouts refer to "commands" when discussing what
the end users call via the "git" top-level program. We should refer them
as "git programs" when we discuss the fact that the commands are
implemented as separate programs, but in other contexts, it is better to
use the term "git commands" consistently.
Signed-off-by: Ori Avtalion <ori@avtalion.name>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paul Bolle [Tue, 11 Aug 2009 13:03:58 +0000 (15:03 +0200)]
Documentation: merge: one <remote> is required
merge only requires one <remote>, so "<remote>..." should be used in the
synopsis (and not "<remote> <remote>...").
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Tue, 11 Aug 2009 10:10:21 +0000 (12:10 +0200)]
help.c: give correct structure's size to memset()
These two structures are of the same type, but we'd better be consistent.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 12 Aug 2009 03:27:40 +0000 (23:27 -0400)]
allow pull --rebase on branch yet to be born
When doing a "pull --rebase", we check to make sure that the index and
working tree are clean. The index-clean check compares the index against
HEAD. The test erroneously reports dirtiness if we don't have a HEAD yet.
In such an "unborn branch" case, by definition, a non-empty index won't
be based on whatever we are pulling down from the remote, and will lose
the local change. Just check if $GIT_DIR/index exists and error out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nicolas Pitre [Wed, 12 Aug 2009 19:47:55 +0000 (15:47 -0400)]
block-sha1: support for architectures with memory alignment restrictions
This is needed on architectures with poor or non-existent unaligned memory
support and/or no fast byte swap instruction (such as ARM) by using byte
accesses to memory and shifting the result together.
This also makes the code portable, therefore the byte access methods are
the defaults. Any architecture that properly supports unaligned word
accesses in hardware simply has to enable the alternative methods.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nicolas Pitre [Wed, 12 Aug 2009 19:46:41 +0000 (15:46 -0400)]
block-sha1: split the different "hacks" to be individually selected
This is to make it easier for them to be selected individually depending
on the architecture instead of the other way around i.e. having each
architecture select a list of hacks up front. That makes for clearer
documentation as well.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nicolas Pitre [Wed, 12 Aug 2009 19:45:48 +0000 (15:45 -0400)]
block-sha1: move code around
Move the code around so specific architecture hacks are defined first.
Also make one line comments actually one line. No code change.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 11 Aug 2009 05:23:59 +0000 (22:23 -0700)]
Merge branch 'maint'
* maint:
Fix typos in git-remote.txt and git-symbolic-ref.txt
git-instaweb: fix mod_perl detection for apache2
Junio C Hamano [Tue, 11 Aug 2009 05:23:48 +0000 (22:23 -0700)]
Merge branch 'maint-1.6.3' into maint
* maint-1.6.3:
Fix typos in git-remote.txt and git-symbolic-ref.txt
Junio C Hamano [Tue, 11 Aug 2009 05:18:21 +0000 (22:18 -0700)]
Merge branch 'jk/push-quiet'
* jk/push-quiet:
transport: don't show push status if --quiet is given
transport: pass "quiet" flag to pack-objects
push: add --quiet flag
Junio C Hamano [Tue, 11 Aug 2009 05:17:01 +0000 (22:17 -0700)]
Merge branch 'jc/maint-merge-recursive-fix'
* jc/maint-merge-recursive-fix:
merge-recursive: don't segfault while handling rename clashes
Junio C Hamano [Tue, 11 Aug 2009 05:16:47 +0000 (22:16 -0700)]
Merge branch 'zf/maint-gitweb-acname'
* zf/maint-gitweb-acname:
gitweb: parse_commit_text encoding fix
Junio C Hamano [Tue, 11 Aug 2009 05:16:42 +0000 (22:16 -0700)]
Merge branch 'ns/am-raw-email'
* ns/am-raw-email:
git-am: print fair error message when format detection fails
am: allow individual e-mail files as input
Junio C Hamano [Tue, 11 Aug 2009 05:16:09 +0000 (22:16 -0700)]
Merge branch 'np/maint-limit-delta-cache'
* np/maint-limit-delta-cache:
don't let the delta cache grow unbounded in 'git repack'
Junio C Hamano [Tue, 11 Aug 2009 05:15:41 +0000 (22:15 -0700)]
Merge branch 'jp/symlink-dirs'
* jp/symlink-dirs:
t6035-merge-dir-to-symlink depends on SYMLINKS prerequisite
git-checkout: be careful about untracked symlinks
lstat_cache: guard against full match of length of 'name' parameter
Demonstrate bugs when a directory is replaced with a symlink
Junio C Hamano [Tue, 11 Aug 2009 05:15:12 +0000 (22:15 -0700)]
Merge branch 'mk/grep-max-depth'
* mk/grep-max-depth:
grep: Add --max-depth option.
Junio C Hamano [Tue, 11 Aug 2009 05:14:57 +0000 (22:14 -0700)]
Merge branch 'js/run-command-updates'
* js/run-command-updates:
api-run-command.txt: describe error behavior of run_command functions
run-command.c: squelch a "use before assignment" warning
receive-pack: remove unnecessary run_status report
run_command: report failure to execute the program, but optionally don't
run_command: encode deadly signal number in the return value
run_command: report system call errors instead of returning error codes
run_command: return exit code as positive value
MinGW: simplify waitpid() emulation macros
Štěpán Němec [Tue, 11 Aug 2009 00:52:07 +0000 (02:52 +0200)]
Fix typos in git-remote.txt and git-symbolic-ref.txt
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Mon, 10 Aug 2009 23:52:07 +0000 (16:52 -0700)]
block-sha1: improve code on large-register-set machines
For x86 performance (especially in 32-bit mode) I added that hack to write
the SHA1 internal temporary hash using a volatile pointer, in order to get
gcc to not try to cache the array contents. Because gcc will do all the
wrong things, and then spill things in insane random ways.
But on architectures like PPC, where you have 32 registers, it's actually
perfectly reasonable to put the whole temporary array[] into the register
set, and gcc can do so.
So make the 'volatile unsigned int *' cast be dependent on a
SMALL_REGISTER_SET preprocessor symbol, and enable it (currently) on just
x86 and x86-64. With that, the routine is fairly reasonable even when
compared to the hand-scheduled PPC version. Ben Herrenschmidt reports on
a G5:
* Paulus asm version: about 3.67s
* Yours with no change: about 5.74s
* Yours without "volatile": about 3.78s
so with this the C version is within about 3% of the asm one.
And add a lot of commentary on what the heck is going on.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nicolas Sebrecht [Fri, 7 Aug 2009 01:08:13 +0000 (20:08 -0500)]
git-am: print fair error message when format detection fails
Avoid git ending with this message:
"Patch format is not supported."
With improved error message in the format detection failure case by
Giuseppe Bilotta.
Signed-off-by: Nicolas Sebrecht <ni.s@laposte.net>
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 7 Aug 2009 01:08:12 +0000 (20:08 -0500)]
am: allow individual e-mail files as input
We traditionally allowed a mbox file or a directory name of a maildir (but
never an individual file inside a maildir) to be given to "git am". Even
though an individual file in a maildir (or more generally, a piece of
RFC2822 e-mail) is not a mbox file, it contains enough information to
create a commit out of it, so there is no reason to reject one. Running
mailsplit on such a file feels stupid, but it does not hurt.
This builds on top of
a5a6755 (git-am foreign patch support: introduce
patch_format, 2009-05-27) that introduced mailbox format detection. The
codepath to deal with a mbox requires it to begin with "From " line and
also allows it to begin with "From: ", but a random piece of e-mail can
and often do begin with any valid RFC2822 header lines.
Instead of checking the first line, we extract all the lines up to the
first empty line, and make sure they look like e-mail headers.
A test is added to t4150 to demonstrate this feature.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Mon, 10 Aug 2009 16:22:22 +0000 (18:22 +0200)]
Correctly mark cover letters' encodings if they are not pure ASCII
If your name is, say, Üwë, you want your cover letters to appear
correctly. Convince format-patch to mark it as 8-bit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Mon, 10 Aug 2009 16:22:18 +0000 (18:22 +0200)]
Expose the has_non_ascii() function
This function is useful outside of log-tree.c, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Luke Diamand [Wed, 29 Jul 2009 23:13:46 +0000 (00:13 +0100)]
git-p4: stream from perforce to speed up clones
Change commit() to stream data from Perforce and into fast-import
rather than reading into memory first, and then writing out. This
hugely reduces the memory requirements when cloning non-incrementally.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>