OSDN Git Service
Ivan Khoronzhuk [Thu, 7 Nov 2019 20:01:58 +0000 (22:01 +0200)]
ethernet: ti: cpts: use ktime_get_real_ns helper
Update on more short variant for getting real clock in ns.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 8 Nov 2019 03:54:43 +0000 (19:54 -0800)]
Merge branch 'aquantia-next'
Igor Russkikh says:
====================
Aquantia Marvell atlantic driver updates 11-2019
Here is a bunch of atlantic driver new features and updates.
Shortlist:
- Me adding ethtool private flags for various loopback test modes,
- Nikita is doing some work here on power management, implementing new PM API,
He also did some checkpatch style cleanup of older driver parts.
- I'm also adding a new UDP GSO offload support and flags for loopback activation
- We are now Marvell, so I am changing email addresses on maintainers list.
v2: styling, ip6 correct handling in udpgso
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 7 Nov 2019 22:42:08 +0000 (22:42 +0000)]
net: atlantic: change email domains to Marvell
Aquantia is now part of Marvell, eventually we'll cease standalone
aquantia.com domain. Thus, change the maintainers file and some other
references to @marvell.com domain
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 7 Nov 2019 22:42:06 +0000 (22:42 +0000)]
net: atlantic: implement UDP GSO offload
atlantic hardware does support UDP hardware segmentation offload.
This allows user to specify one large contiguous buffer with data
which then will be split automagically into multiple UDP packets
of specified size.
Bulk sending of large UDP streams lowers CPU usage and increases
bandwidth.
We did estimations both with udpgso_bench_tx test tool and with modified
iperf3 measurement tool (4 streams, multithread, 200b packet size)
over AQC<->AQC 10G link. Flow control is disabled to prevent RX side
impact on measurements.
No UDP GSO:
iperf3 -c 10.0.1.2 -u -b0 -l 200 -P4 --multithread
UDP GSO:
iperf3 -c 10.0.1.2 -u -b0 -l 12600 --udp-lso 200 -P4 --multithread
Mode CPU iperf speed Line speed Packets per second
-------------------------------------------------------------
NO UDP GSO 350% 3.07 Gbps 3.8 Gbps 1,919,419
SW UDP GSO 200% 5.55 Gbps 6.4 Gbps 3,286,144
HW UDP GSO 90% 6.80 Gbps 8.4 Gbps 4,273,117
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikita Danilov [Thu, 7 Nov 2019 22:42:04 +0000 (22:42 +0000)]
net: atlantic: update flow control logic
We now differentiate requested and negotiated flow control
modes. Therefore `ethtool -A` now operates on local requested
FC values, and regular link settings shows the negotiated FC
settings.
Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 7 Nov 2019 22:42:02 +0000 (22:42 +0000)]
net: atlantic: stylistic renames
We are trying to follow the naming of the chip (atlantic), not
company. So replace some old namings.
Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikita Danilov [Thu, 7 Nov 2019 22:42:00 +0000 (22:42 +0000)]
net: atlantic: code style cleanup
Thats a pure checkpatck walkthrough the code with no functional
changes. Reverse christmas tree, spacing, etc.
Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 7 Nov 2019 22:41:58 +0000 (22:41 +0000)]
net: atlantic: loopback tests via private flags
Here we add a number of ethtool private flags
to allow enabling various loopbacks on HW.
Thats useful for verification and bringup works.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikita Danilov [Thu, 7 Nov 2019 22:41:57 +0000 (22:41 +0000)]
net: atlantic: add fw configuration memory area
Device FW has a separate memory area where various
config fields are stored and could be used by the
driver.
Here we modify download/upload infrastructure to
allow accessing this area.
Lateron this will be used to configure various behaviours
Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikita Danilov [Thu, 7 Nov 2019 22:41:55 +0000 (22:41 +0000)]
net: atlantic: adding ethtool physical identification
`ethtool -p eth0` will blink leds helping identify
physical port.
Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikita Danilov [Thu, 7 Nov 2019 22:41:54 +0000 (22:41 +0000)]
net: atlantic: add msglevel configuration
We add ethtool msglevel configuration and change some
printouts to use netdev_info set of functions.
Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikita Danilov [Thu, 7 Nov 2019 22:41:52 +0000 (22:41 +0000)]
net: atlantic: refactoring pm logic
We now implement .driver.pm callbacks, these
allows driver to work correctly in hibernate
usecases, especially when used in conjunction with
WOL feature.
Before that driver only reacted to legacy .suspend/.resume
callbacks, that was a limitation in some cases.
Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikita Danilov [Thu, 7 Nov 2019 22:41:50 +0000 (22:41 +0000)]
net: atlantic: implement wake_phy feature
Wake on PHY allows to configure device to wakeup host
as soon as PHY link status is changed to active.
Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikita Danilov [Thu, 7 Nov 2019 22:41:49 +0000 (22:41 +0000)]
net: atlantic: update firmware interface
Here we improve FW interface structures layout
and prepare these for the wake phy feature implementation.
Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 8 Nov 2019 03:51:41 +0000 (19:51 -0800)]
Merge branch 'mlxsw-Add-layer-3-devlink-trap-support'
Ido Schimmel says:
====================
mlxsw: Add layer 3 devlink-trap support
This patch set from Amit adds support in mlxsw for layer 3 traps that
can report drops and exceptions via devlink-trap.
In a similar fashion to the existing layer 2 traps, these traps can send
packets to the CPU that were not routed as intended by the underlying
device.
The traps are divided between the two types detailed in devlink-trap
documentation: drops and exceptions. Unlike drops, packets received via
exception traps are also injected to the kernel's receive path, as they
are required for the correct functioning of the control plane. For
example, packets trapped due to TTL error must be injected to kernel's
receive path for traceroute to work properly.
Patch set overview:
Patch #1 adds the layer 3 drop traps to devlink along with their
documentation.
Patch #2 adds support for layer 3 drop traps in mlxsw.
Patches #3-#5 add selftests for layer 3 drop traps.
Patch #6 adds the layer 3 exception traps to devlink along with their
documentation.
Patches #7-#9 gradually add support for layer 3 exception traps in
mlxsw.
Patches #10-#12 add selftests for layer 3 exception traps.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Thu, 7 Nov 2019 16:42:20 +0000 (18:42 +0200)]
selftests: mlxsw: Add test cases for devlink-trap layer 3 exceptions
Test that each supported packet trap exception is triggered under the
right conditions.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Thu, 7 Nov 2019 16:42:19 +0000 (18:42 +0200)]
selftests: forwarding: tc_common: Add hitting check
Add an option to check that packets hit the tc filter without providing
the exact number of packets that should hit it.
It is useful while sending many packets in background and checking that
at least one of them hit the tc filter.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Thu, 7 Nov 2019 16:42:18 +0000 (18:42 +0200)]
selftests: forwarding: devlink: Add functionality for trap exceptions test
Add common part of all the tests - check devlink status to ensure that
packets were trapped.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Thu, 7 Nov 2019 16:42:17 +0000 (18:42 +0200)]
mlxsw: Add layer 3 devlink-trap exceptions support
Add the trap IDs used to report layer 3 exceptions.
Trapped packets are first reported to devlink and then injected to the
kernel's receive path. All the packets have 'offload_fwd_mark' set in
order to prevent them from potentially being forwarded by the bridge
again.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Thu, 7 Nov 2019 16:42:16 +0000 (18:42 +0200)]
mlxsw: Add specific trap for packets routed via invalid nexthops
Currently, mlxsw does not differentiate between these two cases of
routes with invalid nexthops:
1. Nexthops whose nexthop device is a mlxsw upper (has a RIF), but whose
neighbour could not be resolved
2. Nexthops whose nexthop device is not a mlxsw upper (e.g., management
interface)
Up until now this did not matter and mlxsw trapped packets for both
cases using the same trap ID. However, packets that should have been
routed in hardware (case 1), but incurred a problem are considered
exceptions and should be reported to the user. The two cases should
therefore be split between two different trap IDs.
Allocate a new adjacency entry during initialization and upon the
insertion of the first route with an invalid mlxsw nexthop, program this
entry to discard packets. Packets hitting this entry will be reported
using new trap ID - "DISCARD_ROUTER3".
In the future, the entry could be written during initialization, but
currently firmware requires a valid RIF, which is not available at this
stage.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Thu, 7 Nov 2019 16:42:15 +0000 (18:42 +0200)]
mlxsw: Add new FIB entry type for reject routes
Currently, packets that cannot be routed in hardware (e.g., nexthop
device is not upper of mlxsw), are trapped to the kernel for forwarding.
Such packets are trapped using "RTR_INGRESS0" trap. This trap also traps
packets that hit reject routes (e.g., "unreachable") so that the kernel
will generate the appropriate ICMP error message for them.
Subsequent patch will need to only report to devlink packets that hit a
reject route, which is impossible as long as "RTR_INGRESS0" is
overloaded like that.
Solve this by using "RTR_INGRESS1" trap for packets that hit reject
routes.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Thu, 7 Nov 2019 16:42:14 +0000 (18:42 +0200)]
devlink: Add layer 3 generic packet exception traps
Add layer 3 generic packet exception traps that can report trapped
packets and documentation of the traps.
Unlike drop traps, these exception traps also need to inject the packet
to the kernel's receive path. For example, a packet that was trapped due
to unreachable neighbour need to be injected into the kernel so that it
will trigger an ARP request or a neighbour solicitation message.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Thu, 7 Nov 2019 16:42:13 +0000 (18:42 +0200)]
selftests: mlxsw: Add test cases for devlink-trap layer 3 drops
Test that each supported packet trap is triggered under the right
conditions and that packets are indeed dropped and not forwarded.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Thu, 7 Nov 2019 16:42:12 +0000 (18:42 +0200)]
selftests: devlink: Make devlink_trap_cleanup() more generic
Add proto parameter in order to enable the use of devlink_trap_cleanup()
in tests that use IPv6 protocol.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Thu, 7 Nov 2019 16:42:11 +0000 (18:42 +0200)]
selftests: devlink: Export functions to devlink library
l2_drops_test() is used to check that drop traps are functioning as
intended. Currently it is only used in the layer 2 test, but it is also
useful for the layer 3 test introduced in the subsequent patch.
l2_drops_cleanup() is used to clean configurations and kill mausezahn
proccess.
Export the functions to the common devlink library to allow it to be
re-used by future tests.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Thu, 7 Nov 2019 16:42:10 +0000 (18:42 +0200)]
mlxsw: Add layer 3 devlink-trap support
Add the trap IDs and trap group used to report layer 3 drops. Register
layer 3 packet traps and associated layer 3 trap group with devlink
during driver initialization.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Thu, 7 Nov 2019 16:42:09 +0000 (18:42 +0200)]
devlink: Add layer 3 generic packet traps
Add packet traps that can report packets that were dropped during layer
3 forwarding.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Thu, 7 Nov 2019 23:58:21 +0000 (00:58 +0100)]
enetc: fix return value for enetc_ioctl()
Return -EOPNOTSUPP instead of -EINVAL if the requested ioctl is not
implemented.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 7 Nov 2019 19:51:18 +0000 (11:51 -0800)]
tcp: Remove one extra ktime_get_ns() from cookie_init_timestamp
tcp_make_synack() already uses tcp_clock_ns(), and can pass
the value to cookie_init_timestamp() to avoid another call
to ktime_get_ns() helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 7 Nov 2019 18:32:32 +0000 (18:32 +0000)]
selftests: Add source route tests to fib_tests
Add tests to verify routes with source address set are deleted when
source address is deleted.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 7 Nov 2019 18:30:42 +0000 (10:30 -0800)]
inetpeer: fix data-race in inet_putpeer / inet_putpeer
We need to explicitely forbid read/store tearing in inet_peer_gc()
and inet_putpeer().
The following syzbot report reminds us about inet_putpeer()
running without a lock held.
BUG: KCSAN: data-race in inet_putpeer / inet_putpeer
write to 0xffff888121fb2ed0 of 4 bytes by interrupt on cpu 0:
inet_putpeer+0x37/0xa0 net/ipv4/inetpeer.c:240
ip4_frag_free+0x3d/0x50 net/ipv4/ip_fragment.c:102
inet_frag_destroy_rcu+0x58/0x80 net/ipv4/inet_fragment.c:228
__rcu_reclaim kernel/rcu/rcu.h:222 [inline]
rcu_do_batch+0x256/0x5b0 kernel/rcu/tree.c:2157
rcu_core+0x369/0x4d0 kernel/rcu/tree.c:2377
rcu_core_si+0x12/0x20 kernel/rcu/tree.c:2386
__do_softirq+0x115/0x33f kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0xbb/0xe0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:536 [inline]
smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830
native_safe_halt+0xe/0x10 arch/x86/kernel/paravirt.c:71
arch_cpu_idle+0x1f/0x30 arch/x86/kernel/process.c:571
default_idle_call+0x1e/0x40 kernel/sched/idle.c:94
cpuidle_idle_call kernel/sched/idle.c:154 [inline]
do_idle+0x1af/0x280 kernel/sched/idle.c:263
write to 0xffff888121fb2ed0 of 4 bytes by interrupt on cpu 1:
inet_putpeer+0x37/0xa0 net/ipv4/inetpeer.c:240
ip4_frag_free+0x3d/0x50 net/ipv4/ip_fragment.c:102
inet_frag_destroy_rcu+0x58/0x80 net/ipv4/inet_fragment.c:228
__rcu_reclaim kernel/rcu/rcu.h:222 [inline]
rcu_do_batch+0x256/0x5b0 kernel/rcu/tree.c:2157
rcu_core+0x369/0x4d0 kernel/rcu/tree.c:2377
rcu_core_si+0x12/0x20 kernel/rcu/tree.c:2386
__do_softirq+0x115/0x33f kernel/softirq.c:292
run_ksoftirqd+0x46/0x60 kernel/softirq.c:603
smpboot_thread_fn+0x37d/0x4a0 kernel/smpboot.c:165
kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes:
4b9d9be839fd ("inetpeer: remove unused list")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Madalin Bucur [Thu, 7 Nov 2019 13:03:44 +0000 (15:03 +0200)]
net: phy: at803x: add missing dependency on CONFIG_REGULATOR
Compilation fails on PPC targets as CONFIG_REGULATOR is not set and
drivers/regulator/devres.c is not compiled in while functions exported
there are used by drivers/net/phy/at803x.c. Here's the error log:
LD .tmp_vmlinux1
drivers/net/phy/at803x.o: In function `at803x_rgmii_reg_set_voltage_sel':
drivers/net/phy/at803x.c:294: undefined reference to `.rdev_get_drvdata'
drivers/net/phy/at803x.o: In function `at803x_rgmii_reg_get_voltage_sel':
drivers/net/phy/at803x.c:306: undefined reference to `.rdev_get_drvdata'
drivers/net/phy/at803x.o: In function `at8031_register_regulators':
drivers/net/phy/at803x.c:359: undefined reference to `.devm_regulator_register'
drivers/net/phy/at803x.c:365: undefined reference to `.devm_regulator_register'
drivers/net/phy/at803x.o:(.data.rel+0x0): undefined reference to `regulator_list_voltage_table'
linux/Makefile:1074: recipe for target 'vmlinux' failed
make[1]: *** [vmlinux] Error 1
Fixes:
2f664823a470 ("net: phy: at803x: add device tree binding")
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei [Thu, 7 Nov 2019 10:44:48 +0000 (12:44 +0200)]
dpaa2-eth: add ethtool MAC counters
When a DPNI is connected to a MAC, export its associated counters.
Ethtool related functions are added in dpaa2_mac for returning the
number of counters, their strings and also their values.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Thu, 7 Nov 2019 08:40:00 +0000 (09:40 +0100)]
enetc: ethtool: add wake-on-lan callbacks
If there is an external PHY, pass the wake-on-lan request to the PHY.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Thu, 7 Nov 2019 08:39:37 +0000 (09:39 +0100)]
enetc: add ioctl() support for PHY-related ops
If there is an attached PHY try to handle the requested ioctl with its
handler, which allows the userspace to access PHY registers, for
example. This will make mii-diag and similar tools work.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Wed, 6 Nov 2019 14:52:31 +0000 (14:52 +0000)]
mlxsw: spectrum: Fix error return code in mlxsw_sp_port_module_info_init()
Fix to return negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.
Fixes:
4a7f970f1240 ("mlxsw: spectrum: Replace port_to_module array with array of structs")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 7 Nov 2019 18:41:59 +0000 (10:41 -0800)]
Merge branch 'cxgb4-add-support-for-TC-MQPRIO-Qdisc-Offload'
Rahul Lakkireddy says:
====================
cxgb4: add support for TC-MQPRIO Qdisc Offload
This series of patches add support for offloading TC-MQPRIO Qdisc
to Chelsio T5/T6 NICs. Offloading QoS traffic shaping and pacing
requires using Ethernet Offload (ETHOFLD) resources available on
Chelsio NICs. The ETHOFLD resources are configured by firmware
and taken from the resource pool shared with other Chelsio Upper
Layer Drivers. Traffic flowing through ETHOFLD region requires a
software netdev Tx queue (EOSW_TXQ) exposed to networking stack,
and an underlying hardware Tx queue (EOHW_TXQ) used for sending
packets through hardware.
ETHOFLD region is addressed using EOTIDs, which are per-connection
resource. Hence, EOTIDs are capable of storing only a very small
number of packets in flight. To allow more connections to share
the the QoS rate limiting configuration, multiple EOTIDs must be
allocated to reduce packet drops. EOTIDs are 1-to-1 mapped with
software EOSW_TXQ. Several software EOSW_TXQs can post packets to
a single hardware EOHW_TXQ.
The series is broken down as follows:
Patch 1 queries firmware for maximum available traffic classes,
as well as, start and maximum available indices (EOTID) into ETHOFLD
region, supported by the underlying device.
Patch 2 reworks queue configuration and simplifies MSI-X allocation
logic in preparation for ETHOFLD queues support.
Patch 3 adds skeleton for validating and configuring TC-MQPRIO Qdisc
offload. Also, adds support for software EOSW_TXQs and exposes them
to network stack. Updates Tx queue selection to use fallback NIC Tx
path for unsupported traffic that can't go through ETHOFLD queues.
Patch 4 adds support for managing hardware queues to rate limit
traffic flowing through them. The queues are allocated/removed based
on enabling/disabling TC-MQPRIO Qdisc offload, respectively.
Patch 5 adds Tx path for traffic flowing through software EOSW_TXQ
and EOHW_TXQ. Also, adds Rx path to handle Tx completions.
Patch 6 updates exisiting SCHED API to configure FLOWC based QoS
offload. In the existing QUEUE based rate limiting, multiple queues
sharing a traffic class get the aggreagated max rate limit value.
On the other hand, in FLOWC based rate limiting, multiple queues
sharing a traffic class get their own individual max rate limit
value. For example, if 2 queues are bound to class 0, which is rate
limited to 1 Gbps, then in QUEUE based rate limiting, both the
queues get the aggregate max output of 1 Gbps only. In FLOWC based
rate limiting, each queue gets its own output of max 1 Gbps each;
i.e. 2 queues * 1 Gbps rate limit = 2 Gbps max output.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Thu, 7 Nov 2019 15:59:09 +0000 (21:29 +0530)]
cxgb4: add FLOWC based QoS offload
Rework SCHED API to allow offloading TC-MQPRIO QoS configuration.
The existing QUEUE based rate limiting throttles all queues sharing
a traffic class, to the specified max rate limit value. So, if
multiple queues share a traffic class, then all the queues get
the aggregate specified max rate limit.
So, introduce the new FLOWC based rate limiting, where multiple
queues can share a traffic class with each queue getting its own
individual specified max rate limit.
For example, if 2 queues are bound to class 0, which is rate limited
to 1 Gbps, then 2 queues using QUEUE based rate limiting, get the
aggregate output of 1 Gbps only. In FLOWC based rate limiting, each
queue gets its own output of max 1 Gbps each; i.e. 2 queues * 1 Gbps
rate limit = 2 Gbps.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Thu, 7 Nov 2019 15:59:08 +0000 (21:29 +0530)]
cxgb4: add Tx and Rx path for ETHOFLD traffic
Implement Tx path for traffic flowing through software EOSW_TXQ
and EOHW_TXQ. Since multiple EOSW_TXQ can post packets to a single
EOHW_TXQ, protect the hardware queue with necessary spinlock. Also,
move common code used to generate TSO work request to a common
function.
Implement Rx path to handle Tx completions for successfully
transmitted packets.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Thu, 7 Nov 2019 15:59:07 +0000 (21:29 +0530)]
cxgb4: add ETHOFLD hardware queue support
Add support for configuring and managing ETHOFLD hardware queues.
Keep the queue count and MSI-X allocation scheme same as NIC queues.
ETHOFLD hardware queues are dynamically allocated/destroyed as
TC-MQPRIO Qdisc offload is enabled/disabled on the corresponding
interface, respectively.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Thu, 7 Nov 2019 15:59:06 +0000 (21:29 +0530)]
cxgb4: parse and configure TC-MQPRIO offload
Add logic for validation and configuration of TC-MQPRIO Qdisc
offload. Also, add support to manage EOSW_TXQ, which have 1-to-1
mapping with EOTIDs, and expose them to network stack.
Move common skb validation in Tx path to a separate function and
add minimal Tx path for ETHOFLD. Update Tx queue selection to return
normal NIC Txq to send traffic pattern that can't go through ETHOFLD
Tx path.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Thu, 7 Nov 2019 15:59:05 +0000 (21:29 +0530)]
cxgb4: rework queue config and MSI-X allocation
Simplify queue configuration and MSI-X allocation logic. Use a single
MSI-X information table for both NIC and ULDs. Remove hard-coded
MSI-X indices for firmware event queue and non data interrupts.
Instead, use the MSI-X bitmap to obtain a free MSI-X index
dynamically. Save each Rxq's index into the MSI-X information table,
within the Rxq structures themselves, for easier cleanup.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Thu, 7 Nov 2019 15:59:04 +0000 (21:29 +0530)]
cxgb4: query firmware for QoS offload resources
QoS offload needs Ethernet Offload (ETHOFLD) resources present in the
NIC. These resources are shared with other ULDs. So, query firmware
for the available number of traffic classes, as well as, start and
end indices (EOTID) of the ETHOFLD region.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 7 Nov 2019 04:52:40 +0000 (20:52 -0800)]
net_sched: gen_estimator: extend packet counter to 64bit
I forgot to change last_packets field in struct net_rate_estimator.
Without this fix, rate estimators would misbehave after more
than 2^32 packets have been sent.
Another solution would be to be careful and only use the
32 least significant bits of packets counters, but we have
a hole in net_rate_estimator structure and this looks
easier to read/maintain.
Fixes:
d0083d98f685 ("net_sched: extend packet counter to 64bit")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chenwandun [Thu, 7 Nov 2019 01:39:49 +0000 (09:39 +0800)]
dpaa2-ptp: fix compile error
phylink_set_port_modes will be compiled if CONFIG_PHYLINK enabled,
dpaa2_mac_validate will be compiled if CONFIG_FSL_DPAA2_ETH enabled,
it should select CONFIG_PHYLINK when dpaa2_mac_validate call
phylink_set_port_modes
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.o: In function `dpaa2_mac_validate':
dpaa2-mac.c:(.text+0x3a1): undefined reference to `phylink_set_port_modes'
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.o: In function `dpaa2_mac_connect':
dpaa2-mac.c:(.text+0x91a): undefined reference to `phylink_create'
dpaa2-mac.c:(.text+0x94e): undefined reference to `phylink_of_phy_connect'
dpaa2-mac.c:(.text+0x97f): undefined reference to `phylink_destroy'
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.o: In function `dpaa2_mac_disconnect':
dpaa2-mac.c:(.text+0xa9f): undefined reference to `phylink_disconnect_phy'
dpaa2-mac.c:(.text+0xab0): undefined reference to `phylink_destroy'
make: *** [vmlinux] Error 1
Fixes:
719479230893 ("dpaa2-eth: add MAC/PHY support through phylink")
Signed-off-by: Chenwandun <chenwandun@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 7 Nov 2019 05:45:01 +0000 (21:45 -0800)]
Merge branch '100GbE' of git://git./linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
100GbE Intel Wired LAN Driver Updates 2019-11-06
This series contains updates to ice driver only.
Scott adds ethtool -m support so that we can read eeprom data on SFP/OSFP
modules.
Anirudh updates the return value to properly reflect when SRIOV is not
supported.
Md Fahad updates the driver to handle a change in the NVM, where the
boot configuration section was moved to the Preserved Field Area (PFA)
of the NVM.
Paul resolves an issue when DCBx requests non-contiguous TCs, transmit
hangs could occur, so configure a default traffic class (TC0) in these
cases to prevent traffic hangs. Adds a print statement to notify the
user when unsupported modules are inserted.
Bruce fixes up the driver unload code flow to ensure we do not clear the
interrupt scheme until the reset is complete, otherwise a hardware error
may occur.
Dave updates the DCB initialization to set is_sw_lldp boolean when the
firmware has been detected to be in an untenable state. This will
ensure that the firmware is in a known state.
Michal saves off the PCI state and I/O BARs address after PCI bus reset
so that after the reset, device registers can be read. Also adds a NULL
pointer check to prevent a potential kernel panic.
Mitch resolves an issue where VF's on PF's other than 0 were not seeing
resets by using the per-PF VF ID instead of the absolute VF ID.
Krzysztof does some code cleanup to remove a unneeded wrapper and
reduces the code complexity.
Brett reduces confusion by changing the name of ice_vc_dis_vf() to
ice_vc_reset_vf() to better describe what the function is actually
doing.
v2: dropped patch 3 "ice: Add support for FW recovery mode detection"
from the origin al series, while Ani makes changes based on
community feedback to implement devlink into the changes.
v3: dropped patch 1 "ice: implement set_eeprom functionality" due to a
bug found and additional changes will be needed when Ani implements
devlink in the driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 7 Nov 2019 00:18:00 +0000 (01:18 +0100)]
net: dsa: mv8e6xxx: Fix stub function parameters
mv88e6xxx_g2_atu_stats_get() takes two parameters. Make the stub
function also take two, otherwise we get compile errors.
Fixes:
c5f299d59261 ("net: dsa: mv88e6xxx: global1_atu: Add helper for get next")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 7 Nov 2019 05:42:06 +0000 (21:42 -0800)]
Merge branch 'net-phy-at803x-device-tree-binding'
Michael Walle says:
====================
net: phy: at803x device tree binding
Adds a device tree binding to configure the clock and the RGMII voltage.
Changes since v1:
- rebased to latest net-next
- renamed "Atheros" to "Qualcomm Atheros"
- add a new patch to remove config_init() from AR9331
Changes since the RFC:
- renamed the Kconfig entry to "Qualcomm Atheros.." and reordered the
item
- renamed the prefix from atheros to qca
- use the correct name AR803x (instead of AT803x) in new files and
dt-bindings.
- listed the PHY maintainers in the new schema. Hopefully, thats ok.
- fixed a typo in the bindings schema
- run dtb_checks and dt_binding_check and fixed the schema
- dropped the rgmii-io-1v8 property; instead provide two regulators vddh
and vddio, add one consumer vddio-supply
- fix the clock settings for the AR8030/AR8035
- only the AR8031 supports chaning the LDO and the PLL mode in software.
Check if we have the correct PHY.
- new patch to mention the AR8033 which is the same as the AR8031 just
without PTP support
- new patch which corrects any displayed PHY names and comments. Be
consistent.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Wed, 6 Nov 2019 22:36:17 +0000 (23:36 +0100)]
net: phy: at803x: remove config_init for AR9331
According to its datasheet, the internal PHY doesn't have debug
registers nor MMDs. Since config_init() only configures delays and
clocks and so on in these registers it won't be needed on this PHY.
Remove it.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Wed, 6 Nov 2019 22:36:16 +0000 (23:36 +0100)]
net: phy: at803x: fix the PHY names
Fix at least the displayed strings. The actual name of the chip is
AR803x.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Wed, 6 Nov 2019 22:36:15 +0000 (23:36 +0100)]
net: phy: at803x: mention AR8033 as same as AR8031
The AR8033 is the AR8031 without PTP support. All other registers are
the same. Unfortunately, they share the same PHY ID. Therefore, we
cannot distinguish between the one with PTP support and the one without.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Wed, 6 Nov 2019 22:36:14 +0000 (23:36 +0100)]
net: phy: at803x: add device tree binding
Add support for configuring the CLK_25M pin as well as the RGMII I/O
voltage by the device tree.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Wed, 6 Nov 2019 22:36:13 +0000 (23:36 +0100)]
dt-bindings: net: phy: Add support for AT803X
Document the Atheros AR803x PHY bindings.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Wed, 6 Nov 2019 22:36:12 +0000 (23:36 +0100)]
net: phy: at803x: fix Kconfig description
The name of the PHY is actually AR803x not AT803x. Additionally, add the
name of the vendor and mention the AR8031 support.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 6 Nov 2019 20:59:33 +0000 (12:59 -0800)]
tcp: fix data-race in tcp_recvmsg()
Reading tp->recvmsg_inq after socket lock is released
raises a KCSAN warning [1]
Replace has_tss & has_cmsg by cmsg_flags and make
sure to not read tp->recvmsg_inq a second time.
[1]
BUG: KCSAN: data-race in tcp_chrono_stop / tcp_recvmsg
write to 0xffff888126adef24 of 2 bytes by interrupt on cpu 0:
tcp_chrono_set net/ipv4/tcp_output.c:2309 [inline]
tcp_chrono_stop+0x14c/0x280 net/ipv4/tcp_output.c:2338
tcp_clean_rtx_queue net/ipv4/tcp_input.c:3165 [inline]
tcp_ack+0x274f/0x3170 net/ipv4/tcp_input.c:3688
tcp_rcv_established+0x37e/0xf50 net/ipv4/tcp_input.c:5696
tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1561
tcp_v4_rcv+0x19dc/0x1bb0 net/ipv4/tcp_ipv4.c:1942
ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204
ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:442 [inline]
ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523
__netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
__netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
netif_receive_skb_internal+0x59/0x190 net/core/dev.c:5214
napi_skb_finish net/core/dev.c:5677 [inline]
napi_gro_receive+0x28f/0x330 net/core/dev.c:5710
read to 0xffff888126adef25 of 1 bytes by task 7275 on cpu 1:
tcp_recvmsg+0x77b/0x1a30 net/ipv4/tcp.c:2187
inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838
sock_recvmsg_nosec net/socket.c:871 [inline]
sock_recvmsg net/socket.c:889 [inline]
sock_recvmsg+0x92/0xb0 net/socket.c:885
sock_read_iter+0x15f/0x1e0 net/socket.c:967
call_read_iter include/linux/fs.h:1889 [inline]
new_sync_read+0x389/0x4f0 fs/read_write.c:414
__vfs_read+0xb1/0xc0 fs/read_write.c:427
vfs_read fs/read_write.c:461 [inline]
vfs_read+0x143/0x2c0 fs/read_write.c:446
ksys_read+0xd5/0x1b0 fs/read_write.c:587
__do_sys_read fs/read_write.c:597 [inline]
__se_sys_read fs/read_write.c:595 [inline]
__x64_sys_read+0x4c/0x60 fs/read_write.c:595
do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 7275 Comm: sshd Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes:
b75eba76d3d7 ("tcp: send in-queue bytes in cmsg upon read")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 6 Nov 2019 18:04:11 +0000 (10:04 -0800)]
net: silence data-races on sk_backlog.tail
sk->sk_backlog.tail might be read without holding the socket spinlock,
we need to add proper READ_ONCE()/WRITE_ONCE() to silence the warnings.
KCSAN reported :
BUG: KCSAN: data-race in tcp_add_backlog / tcp_recvmsg
write to 0xffff8881265109f8 of 8 bytes by interrupt on cpu 1:
__sk_add_backlog include/net/sock.h:907 [inline]
sk_add_backlog include/net/sock.h:938 [inline]
tcp_add_backlog+0x476/0xce0 net/ipv4/tcp_ipv4.c:1759
tcp_v4_rcv+0x1a70/0x1bd0 net/ipv4/tcp_ipv4.c:1947
ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204
ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:442 [inline]
ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523
__netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:4929
__netif_receive_skb+0x37/0xf0 net/core/dev.c:5043
netif_receive_skb_internal+0x59/0x190 net/core/dev.c:5133
napi_skb_finish net/core/dev.c:5596 [inline]
napi_gro_receive+0x28f/0x330 net/core/dev.c:5629
receive_buf+0x284/0x30b0 drivers/net/virtio_net.c:1061
virtnet_receive drivers/net/virtio_net.c:1323 [inline]
virtnet_poll+0x436/0x7d0 drivers/net/virtio_net.c:1428
napi_poll net/core/dev.c:6311 [inline]
net_rx_action+0x3ae/0xa90 net/core/dev.c:6379
__do_softirq+0x115/0x33f kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0xbb/0xe0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:536 [inline]
do_IRQ+0xa6/0x180 arch/x86/kernel/irq.c:263
ret_from_intr+0x0/0x19
native_safe_halt+0xe/0x10 arch/x86/kernel/paravirt.c:71
arch_cpu_idle+0x1f/0x30 arch/x86/kernel/process.c:571
default_idle_call+0x1e/0x40 kernel/sched/idle.c:94
cpuidle_idle_call kernel/sched/idle.c:154 [inline]
do_idle+0x1af/0x280 kernel/sched/idle.c:263
cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355
start_secondary+0x208/0x260 arch/x86/kernel/smpboot.c:264
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241
read to 0xffff8881265109f8 of 8 bytes by task 8057 on cpu 0:
tcp_recvmsg+0x46e/0x1b40 net/ipv4/tcp.c:2050
inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838
sock_recvmsg_nosec net/socket.c:871 [inline]
sock_recvmsg net/socket.c:889 [inline]
sock_recvmsg+0x92/0xb0 net/socket.c:885
sock_read_iter+0x15f/0x1e0 net/socket.c:967
call_read_iter include/linux/fs.h:1889 [inline]
new_sync_read+0x389/0x4f0 fs/read_write.c:414
__vfs_read+0xb1/0xc0 fs/read_write.c:427
vfs_read fs/read_write.c:461 [inline]
vfs_read+0x143/0x2c0 fs/read_write.c:446
ksys_read+0xd5/0x1b0 fs/read_write.c:587
__do_sys_read fs/read_write.c:597 [inline]
__se_sys_read fs/read_write.c:595 [inline]
__x64_sys_read+0x4c/0x60 fs/read_write.c:595
do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 8057 Comm: syz-fuzzer Not tainted 5.4.0-rc6+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei [Wed, 6 Nov 2019 17:06:50 +0000 (19:06 +0200)]
dpaa2-eth: fix an always true condition in dpaa2_mac_get_if_mode
Convert the phy_mode() function to return the if_mode through an
argument, similar to the new form of of_get_phy_mode().
This will help with handling errors in a common manner and also will fix
an always true condition.
Fixes:
0c65b2b90d13 ("net: of_get_phy_mode: Change API to solve int/unit warnings")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tonghao Zhang [Wed, 6 Nov 2019 16:34:28 +0000 (00:34 +0800)]
net: openvswitch: select vport upcall portid directly
The commit
69c51582ff786 ("dpif-netlink: don't allocate per
thread netlink sockets"), in Open vSwitch ovs-vswitchd, has
changed the number of allocated sockets to just one per port
by moving the socket array from a per handler structure to
a per datapath one. In the kernel datapath, a vport will have
only one socket in most case, if so select it directly in
fast-path.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Wed, 6 Nov 2019 15:54:49 +0000 (15:54 +0000)]
net: axienet: Fix error return code in axienet_probe()
In the DMA memory resource get failed case, the error is not
set and 0 will be returned. Fix it by removing redundant check
since devm_ioremap_resource() will handle it.
Fixes:
28ef9ebdb64c ("net: axienet: make use of axistream-connected attribute optional")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Wed, 6 Nov 2019 14:59:21 +0000 (14:59 +0000)]
net: aquantia: fix return value check in aq_ptp_init()
Function ptp_clock_register() returns ERR_PTR() and never returns
NULL. The NULL test should be removed.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Wed, 6 Nov 2019 14:33:09 +0000 (14:33 +0000)]
ptp: ptp_clockmatrix: Fix missing unlock on error in idtcm_probe()
Add the missing unlock before return from function idtcm_probe()
in the error handling case.
Fixes:
3a6ba7dc7799 ("ptp: Add a ptp clock driver for IDT ClockMatrix.")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tuong Lien [Wed, 6 Nov 2019 11:12:17 +0000 (18:12 +0700)]
tipc: eliminate the dummy packet in link synching
When preparing tunnel packets for the link failover or synchronization,
as for the safe algorithm, we added a dummy packet on the pair link but
never sent it out. In the case of failover, the pair link will be reset
anyway. But for link synching, it will always result in retransmission
of the dummy packet after that.
We have also observed that such the retransmission at the early stage
when a new node comes in a large cluster will take some time and hard
to be done, leading to the repeated retransmit failures and the link is
reset.
Since in commit
4929a932be33 ("tipc: optimize link synching mechanism")
we have already built a dummy 'TUNNEL_PROTOCOL' message on the new link
for the synchronization, there's no need for the dummy on the pair one,
this commit will skip it when the new mechanism takes in place. In case
nothing exists in the pair link's transmq, the link synching will just
start and stop shortly on the peer side.
The patch is backward compatible.
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Tested-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 7 Nov 2019 05:14:22 +0000 (21:14 -0800)]
Merge branch 'lwtunnel-add-ip-and-ip6-options-setting-and-dumping'
Xin Long says:
====================
lwtunnel: add ip and ip6 options setting and dumping
With this patchset, users can configure options by ip route encap
for geneve, vxlan and ersapn lwtunnel, like:
# ip r a 1.1.1.0/24 encap ip id 1 geneve class 0 type 0 \
data "
1212121234567890" dst 10.1.0.2 dev geneve1
# ip r a 1.1.1.0/24 encap ip id 1 vxlan gbp 456 \
dst 10.1.0.2 dev erspan1
# ip r a 1.1.1.0/24 encap ip id 1 erspan ver 1 idx 123 \
dst 10.1.0.2 dev erspan1
iproute side patch is attached on the reply of this mail.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 6 Nov 2019 09:01:07 +0000 (17:01 +0800)]
lwtunnel: add options setting and dumping for erspan
Based on the code framework built on the last patch, to
support setting and dumping for vxlan, we only need to
add ip_tun_parse_opts_erspan() for .build_state and
ip_tun_fill_encap_opts_erspan() for .fill_encap and
if (tun_flags & TUNNEL_ERSPAN_OPT) for .get_encap_size.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 6 Nov 2019 09:01:06 +0000 (17:01 +0800)]
lwtunnel: add options setting and dumping for vxlan
Based on the code framework built on the last patch, to
support setting and dumping for vxlan, we only need to
add ip_tun_parse_opts_vxlan() for .build_state and
ip_tun_fill_encap_opts_vxlan() for .fill_encap and
if (tun_flags & TUNNEL_VXLAN_OPT) for .get_encap_size.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 6 Nov 2019 09:01:05 +0000 (17:01 +0800)]
lwtunnel: add options setting and dumping for geneve
To add options setting and dumping, .build_state(), .fill_encap() and
.get_encap_size() in ip_tun_lwt_ops needs to be extended:
ip_tun_build_state():
ip_tun_parse_opts():
ip_tun_parse_opts_geneve()
ip_tun_fill_encap_info():
ip_tun_fill_encap_opts():
ip_tun_fill_encap_opts_geneve()
ip_tun_encap_nlsize()
ip_tun_opts_nlsize():
if (tun_flags & TUNNEL_GENEVE_OPT)
ip_tun_parse_opts(), ip_tun_fill_encap_opts() and ip_tun_opts_nlsize()
processes LWTUNNEL_IP_OPTS.
ip_tun_parse_opts_geneve(), ip_tun_fill_encap_opts_geneve() and
if (tun_flags & TUNNEL_GENEVE_OPT) processes LWTUNNEL_IP_OPTS_GENEVE.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 6 Nov 2019 09:01:04 +0000 (17:01 +0800)]
lwtunnel: add options process for cmp_encap
When comparing two tun_info, dst_cache member should have been skipped,
as dst_cache is a per cpu pointer and they are always different values
even in two tun_info with the same keys.
So this patch is to skip dst_cache member and compare the key, mode and
options_len only. For the future opts setting support, also to compare
options.
Fixes:
2d79849903e0 ("lwtunnel: ip tunnel: fix multiple routes with different encap")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 6 Nov 2019 09:01:03 +0000 (17:01 +0800)]
lwtunnel: add options process for arp request
Without options copied to the dst tun_info in iptunnel_metadata_reply()
called by arp_process for handling arp_request, the generated arp_reply
packet may be dropped or sent out with wrong options for some tunnels
like erspan and vxlan, and the traffic will break.
Fixes:
63d008a4e9ee ("ipv4: send arp replies to the correct tunnel")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hoang Le [Wed, 6 Nov 2019 06:26:10 +0000 (13:26 +0700)]
tipc: reduce sensitive to retransmit failures
With huge cluster (e.g >200nodes), the amount of that flow:
gap -> retransmit packet -> acked will take time in case of STATE_MSG
dropped/delayed because a lot of traffic. This lead to 1.5 sec tolerance
value criteria made link easy failure around 2nd, 3rd of failed
retransmission attempts.
Instead of re-introduced criteria of 99 faled retransmissions to fix the
issue, we increase failure detection timer to ten times tolerance value.
Fixes:
77cf8edbc0e7 ("tipc: simplify stale link failure criteria")
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Acked-by: Jon
Signed-off-by: David S. Miller <davem@davemloft.net>
Hoang Le [Wed, 6 Nov 2019 06:26:09 +0000 (13:26 +0700)]
tipc: update cluster capabilities if node deleted
There are two improvements when re-calculate cluster capabilities:
- When deleting a specific down node, need to re-calculate.
- In tipc_node_cleanup(), do not need to re-calculate if node
is still existing in cluster.
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Acked-by: Jon
Signed-off-by: David S. Miller <davem@davemloft.net>
Francesco Ruggeri [Tue, 5 Nov 2019 22:48:35 +0000 (14:48 -0800)]
selftest: net: add some traceroute tests
Added the following traceroute tests.
IPV6:
Verify that in this scenario
------------------------ N2
| |
------ ------ N3 ----
| R1 | | R2 |------|H2|
------ ------ ----
| |
------------------------ N1
|
----
|H1|
----
where H1's default route goes through R1 and R1's default route goes
through R2 over N2, traceroute6 from H1 to H2 reports R2's address
on N2 and not N1.
IPV4:
Verify that traceroute from H1 to H2 shows 1.0.1.1 in this scenario
1.0.3.1/24
---- 1.0.1.3/24 1.0.1.1/24 ---- 1.0.2.1/24 1.0.2.4/24 ----
|H1|--------------------------|R1|--------------------------|H2|
---- N1 ---- N2 ----
where net.ipv4.icmp_errors_use_inbound_ifaddr is set on R1 and
1.0.3.1/24 and 1.0.1.1/24 are respectively R1's primary and secondary
address on N1.
v2: fixed some typos, and have bridge in R1 instead of R2 in IPV6 test.
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anirudh Venkataramanan [Wed, 9 Oct 2019 14:09:53 +0000 (07:09 -0700)]
ice: Fix return value when SR-IOV is not supported
When the device is not capable of supporting SR-IOV -ENODEV is being
returned; -EOPNOTSUPP is more appropriate.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Brett Creeley [Wed, 9 Oct 2019 14:09:52 +0000 (07:09 -0700)]
ice: Rename VF function ice_vc_dis_vf to match its behavior
ice_vc_dis_vf() tells iavf that it's going to perform a reset
and then performs a software reset. This is misleading based on
the function name because the VF does not get disabled. So fix
this by changing the name to ice_vc_reset_vf().
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Krzysztof Kazimierczak [Wed, 9 Oct 2019 14:09:51 +0000 (07:09 -0700)]
ice: Get rid of ice_cleanup_header
ice_cleanup_hdrs() has been stripped of most of its content, it only serves
as a wrapper for eth_skb_pad(). We can get rid of it altogether and
simplify the codebase.
Signed-off-by: Krzysztof Kazimierczak <krzysztof.kazimierczak@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Paul Greenwalt [Wed, 9 Oct 2019 14:09:50 +0000 (07:09 -0700)]
ice: print PCI link speed and width
Print message to inform user of PCI link speed and width.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Paul Greenwalt [Wed, 9 Oct 2019 14:09:49 +0000 (07:09 -0700)]
ice: print unsupported module message
Print message to inform user if unsupported module is inserted, and
extend the topology / configuration detection.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mitch Williams [Wed, 9 Oct 2019 14:09:48 +0000 (07:09 -0700)]
ice: write register with correct offset
The VF_MBX_ARQLEN register array is per-PF, not global, so we should not
use the absolute VF ID as an index. Instead, use the per-PF VF ID.
This fixes an issue with VFs on PFs other than 0 not seeing reset.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Michal Swiatkowski [Wed, 9 Oct 2019 14:09:47 +0000 (07:09 -0700)]
ice: Check for null pointer dereference when setting rings
Without this check rebuild vsi can lead to kernel panic.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Michal Swiatkowski [Wed, 9 Oct 2019 14:09:46 +0000 (07:09 -0700)]
ice: save PCI state in probe
Save state to correct recovery memory and I/O BARs address
after PCI bus reset. Without this after reset kernel can't
read device registers.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Dave Ertman [Wed, 9 Oct 2019 14:09:45 +0000 (07:09 -0700)]
ice: Adjust DCB INIT for SW mode
Adjust ice_init_dcb to set the is_sw_lldp boolean
in the case where the FW has been detected to be
in an untenable state such that the driver
should forcibly make sure it is off.
This will ensure that the FW is in a known state.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Bruce Allan [Wed, 9 Oct 2019 14:09:44 +0000 (07:09 -0700)]
ice: fix driver unload flow
As part of the driver unload flow, a PF reset is issued which may still
cause an interrupt to be generated by the device. Do not clear the
interrupt scheme until the reset is complete and there are no pending
transactions otherwise a hardware error may occur.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Paul Greenwalt [Wed, 9 Oct 2019 14:09:43 +0000 (07:09 -0700)]
ice: handle DCBx non-contiguous TC request
If DCBx request non-contiguous TCs, then the driver will configure default
traffic class (TC0). This is done to prevent Tx hang since the driver
currently does not support non-contiguous TC.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Md Fahad Iqbal Polash [Wed, 9 Oct 2019 14:09:42 +0000 (07:09 -0700)]
ice: Update Boot Configuration Section read of NVM
The Boot Configuration Section Block has been moved to the Preserved Field
Area (PFA) of NVM. Update the NVM reads that involves Boot Configuration
Section.
Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Scott W Taylor [Wed, 9 Oct 2019 14:09:40 +0000 (07:09 -0700)]
ice: add ethtool -m support for reading i2c eeprom modules
Implement ethtool -m support to read eeprom data from SFP/QSFP modules.
Signed-off-by: Scott W Taylor <scott.w.taylor@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
David S. Miller [Thu, 7 Nov 2019 00:14:48 +0000 (16:14 -0800)]
Merge branch 'net-various-KCSAN-inspired-fixes'
Eric Dumazet says:
====================
net: various KCSAN inspired fixes
This is a series of minor fixes, mostly dealing with
lockless accesses to socket 'sk_ack_backlog', 'sk_max_ack_backlog'
ane neighbour 'confirmed' fields.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 5 Nov 2019 22:11:54 +0000 (14:11 -0800)]
net: annotate lockless accesses to sk->sk_max_ack_backlog
sk->sk_max_ack_backlog can be read without any lock being held
at least in TCP/DCCP cases.
We need to use READ_ONCE()/WRITE_ONCE() to avoid load/store tearing
and/or potential KCSAN warnings.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 5 Nov 2019 22:11:53 +0000 (14:11 -0800)]
net: annotate lockless accesses to sk->sk_ack_backlog
sk->sk_ack_backlog can be read without any lock being held.
We need to use READ_ONCE()/WRITE_ONCE() to avoid load/store tearing
and/or potential KCSAN warnings.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 5 Nov 2019 22:11:52 +0000 (14:11 -0800)]
net: use helpers to change sk_ack_backlog
Writers are holding a lock, but many readers do not.
Following patch will add appropriate barriers in
sk_acceptq_removed() and sk_acceptq_added().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 5 Nov 2019 22:11:51 +0000 (14:11 -0800)]
net: avoid potential false sharing in neighbor related code
There are common instances of the following construct :
if (n->confirmed != now)
n->confirmed = now;
A C compiler could legally remove the conditional.
Use READ_ONCE()/WRITE_ONCE() to avoid this problem.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 5 Nov 2019 22:11:50 +0000 (14:11 -0800)]
inet_diag: use jiffies_delta_to_msecs()
Use jiffies_delta_to_msecs() to avoid reporting 'infinite'
timeouts and to cleanup code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 5 Nov 2019 22:11:49 +0000 (14:11 -0800)]
net: neigh: use long type to store jiffies delta
A difference of two unsigned long needs long storage.
Fixes:
c7fb64db001f ("[NETLINK]: Neighbour table configuration and statistics via rtnetlink")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Mashak [Tue, 5 Nov 2019 21:43:28 +0000 (16:43 -0500)]
tc-testing: updated pedit TDC tests
Added tests for u8/u32 clear value, u8/16 retain value, u16/32 invert value,
u8/u16/u32 preserve value and test for negative offsets.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 5 Nov 2019 21:28:17 +0000 (13:28 -0800)]
selftests: devlink: undo changes at the end of resource_test
The netdevsim object is reused by all the tests, but the resource
tests puts it into a broken state (failed reload in a different
namespace). Make sure it's fixed up at the end of that test
otherwise subsequent tests fail.
Fixes:
b74c37fd35a2 ("selftests: netdevsim: add tests for devlink reload with resources")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Manoil [Tue, 5 Nov 2019 18:18:21 +0000 (20:18 +0200)]
gianfar: Maximize Rx buffer size
Until now the size of a Rx buffer was artificially limited
to 1536B (which happens to be the default, after reset, hardware
value for a Rx buffer). This approach however leaves unused
memory space for Rx packets, since the driver uses a paged
allocation scheme that reserves half a page for each Rx skb.
There's also the inconvenience that frames around 1536 bytes
can get scattered if the limit is slightly exceeded. This limit
can be exceeded even for standard MTU of 1500B traffic, for common
cases like stacked VLANs, or DSA tags.
To address these issues, let's just compute the buffer size
starting from the upper limit of 2KB (half a page) and
subtract the skb overhead and alignment restrictions.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunfeng Ye [Tue, 5 Nov 2019 11:30:45 +0000 (19:30 +0800)]
ehea: replace with page_shift() in ehea_is_hugepage()
The function page_shift() is supported after the commit
94ad9338109f
("mm: introduce page_shift()").
So replace with page_shift() in ehea_is_hugepage() for readability.
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhu Yanjun [Wed, 6 Nov 2019 06:01:11 +0000 (01:01 -0500)]
net: forcedeth: add xmit_more support
This change adds support for xmit_more based on the igb commit
6f19e12f6230
("igb: flush when in xmit_more mode and under descriptor pressure") and
commit
6b16f9ee89b8 ("net: move skb->xmit_more hint to softnet data") that
were made to igb to support this feature. The function netif_xmit_stopped
is called to check whether transmit queue on device is currently unable to
send to determine whether we must write the tail because we can add no
further buffers.
When normal packets and/or xmit_more packets fill up tx_desc, it is
necessary to trigger NIC tx reg.
Following the advice from David Miller and Jakub Kicinski, after the
xmit_more feature is added, the following scenario will occur.
|
xmit_more packets
|
DMA_MAPPING
|
DMA_MAPPING error check
|
xmit_more packets already in HW xmit queue
|
In the above scenario, if DMA_MAPPING error occurrs, the xmit_more packets
already in HW xmit queue will also be dropped. This is different from the
behavior before xmit_more feature. So it is necessary to trigger NIC HW tx
reg in the above scenario.
To the non-xmit_more packets, the above scenario will not occur.
Tested:
- pktgen (xmit_more packets) SMP x86_64 ->
Test command:
./pktgen_sample03_burst_single_flow.sh ... -b 8 -n
1000000
Test results:
Params:
...
burst: 8
...
Result: OK:
12194004(
c12188996+d5007) usec,
1000001 (1500byte,0frags)
82007pps 984Mb/sec (984084000bps) errors: 0
- iperf (normal packets) SMP x86_64 ->
Test command:
Server: iperf -s
Client: iperf -c serverip
Result:
TCP window size: 85.0 KByte (default)
------------------------------------------------------------
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 1.10 GBytes 942 Mbits/sec
CC: Joe Jin <joe.jin@oracle.com>
CC: JUNXIAO_BI <junxiao.bi@oracle.com>
Reported-and-tested-by: Nan san <nan.1986san@gmail.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 6 Nov 2019 17:59:58 +0000 (09:59 -0800)]
Merge branch 'netdevsim-fix-tests-and-netdevsim'
Jakub Kicinski says:
====================
netdevsim: fix tests and netdevsim
The first patch fixes a merge which brought back some dead
code. Next a tiny re-write of the main test using netdevsim
aims to ease debugging.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 5 Nov 2019 21:26:12 +0000 (13:26 -0800)]
selftests: bpf: log direct file writes
Recent changes to netdevsim moved creating and destroying
devices from netlink to sysfs. The sysfs writes have been
implemented as direct writes, without shelling out. This
is faster, but leaves no trace in the logs. Add explicit
logs to make debugging possible.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 5 Nov 2019 21:26:11 +0000 (13:26 -0800)]
netdevsim: drop code duplicated by a merge
Looks like the port adding loop makes a re-appearance on net-next
after net was merged back into it (even though it doesn't feature
in the merge diff).
The ports are already added in nsim_dev_create() so when we try
to add them again get EEXIST, and see:
netdevsim: probe of netdevsim0 failed with error -17
in the logs. When we remove the loop again the nsim_dev_probe()
and nsim_dev_remove() become a wrapper of nsim_dev_create() and
nsim_dev_destroy(). Remove this layer of indirection.
Fixes:
d31e95585ca6 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 6 Nov 2019 02:36:35 +0000 (18:36 -0800)]
Merge tag 'wireless-drivers-next-2019-11-05' of git://git./linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 5.5
First set of patches for 5.5. The most active driver here clearly is
rtw88, lots of patches for it. More quiet on other drivers, smaller
fixes and cleanups all over.
This pull request also has a trivial conflict, the report and example
resolution here:
https://lkml.kernel.org/r/
20191031111242.
50ab1eca@canb.auug.org.au
Major changes:
rtw88
* add deep power save support
* add mac80211 software tx queue (wake_tx_queue) support
* enable hardware rate control
* add TX-AMSDU support
* add NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 support
* add power tracking support
* add 802.11ac beamformee support
* add set_bitrate_mask support
* add phy_info debugfs to show Tx/Rx physical status
* add RFE type 3 support for 8822b
ath10k
* add support for hardware rfkill on devices where firmware supports it
rtl8xxxu
* add bluetooth co-existence support for single antenna
iwlwifi
* Revamp the debugging infrastructure
====================
Signed-off-by: David S. Miller <davem@davemloft.net>