OSDN Git Service
Dmitry Eremin [Sun, 29 Jan 2017 00:05:12 +0000 (19:05 -0500)]
staging: lustre: libcfs: fix error messages
Don't treat unability to set CPU partition affinity as error.
Improve those warning messages.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8703
Reviewed-on: https://review.whamcloud.com/23307
Reviewed-by: Patrick Farrell <paf@cray.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 29 Jan 2017 00:05:11 +0000 (19:05 -0500)]
staging: lustre: obd: remove OBD_NOTIFY_CREATE
None of the obd_notify() handlers listen for the OBD_NOTIFY_CREATE
event, so remove it and its sole use in lov_add_target().
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8403
Reviewed-on: https://review.whamcloud.com/21420
Reviewed-by: Ben Evans <bevans@cray.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vladimir Saveliev [Sun, 29 Jan 2017 00:05:10 +0000 (19:05 -0500)]
staging: lustre: ptlrpc: allow blocking asts to be delayed
ptlrpc_import_delay_req() refuses to delay blocking asts when import
is not in LUSTRE_IMP_FULL yet. That leads to client eviction assuming
that it failed to respond.
Allow delays for blocking asts being resent.
Signed-off-by: Vladimir Saveliev <vladimir.saveliev@seagate.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8351
Seagate-bug-id: MRP-3500
Reviewed-on: https://review.whamcloud.com/21065
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve Guminski [Sun, 29 Jan 2017 00:05:09 +0000 (19:05 -0500)]
staging: lustre: osc: osc_match_base prototype differs from declaration
The patch updates the prototype in osc_internal.h to match the
enums used in the declaration.
The osc_match_base declaration in lustre/osc/osc_request.c uses
enums for stricter checking on the type and mode parameters:
int osc_match_base(struct obd_export *exp,
...
--> enum ldlm_type type,
union ldlm_policy_data *policy,
--> enum ldlm_mode mode,
... int unref)
The prototype in lustre/osc/osc_internal.h instead used unsigned ints:
int osc_match_base(struct obd_export *exp,
...
--> __u32 type,
union ldlm_policy_data *policy,
--> __u32 mode,
... int unref);
Signed-off-by: Steve Guminski <stephenx.guminski@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8189
Reviewed-on: http://review.whamcloud.com/23167
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niu Yawei [Sun, 29 Jan 2017 00:05:08 +0000 (19:05 -0500)]
staging: ptlrpc: leaked rs on difficult reply
reply_out_callback() should call ptlrpc_schedule_difficult_reply()
to finalize the rs if it's already not on uncommitted list, otherwise,
the rs and the export held by rs could be leaked:
- target_send_reply() sends a difficult reply before the transaction
committed, the reply is linked to scp_rep_active;
- export gets disconnected by umount or whatever reason,
server_disconnect_export() is called to complete all outstanding
replies, which will calls into ptlrpc_handle_rs() to dispose of
the rs, so the rs is removed from the uncommitted list and
LNetMDUnlink() is called to unlink the reply buffer and generate
an unlink event;
- reply_out_callback() is called to process above unlink event,
ptlrpc_schedule_difficult_reply() is supposed to be called to
dispose of the rs finally. However, it could be skipped because of
following flawed code snippet:
if (!rs->rs_no_ack ||
rs->rs_transno <= rs->rs_export->exp_obd->obd_last_committed)
ptlrpc_schedule_difficult_reply(rs);
The intention of above code is: if rs_no_ack is true (COS enabled),
and transaction is not committed, we should rely on commit callback
to release the rs. However, it overlooked the situation that rs
could have been removed from the uncommitted list by disconnecting
export.
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7903
Reviewed-on: http://review.whamcloud.com/22696
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Sun, 29 Jan 2017 00:05:07 +0000 (19:05 -0500)]
staging: libcfs: remove integer types abstraction from libcfs
Replace the ulong_ptr_t and long_ptr_t with standard
kernel types.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6245
Reviewed-on: http://review.whamcloud.com/20204
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rahul Deshmukh [Sun, 29 Jan 2017 00:05:06 +0000 (19:05 -0500)]
staging: lustre: llite: Adding timed wait in ll_umount_begin
There exists timing race between umount and other
thread which will increment the reference count on
mnt e.g. getattr. If umount thread lose the race
then umount fails with EBUSY error. To avoid this
timed wait is added so that umount thread will wait
for user to decrement the mnt reference count.
Signed-off-by: Rahul Deshmukh <rahul.deshmukh@seagate.com>
Signed-off-by: Lokesh Nagappa Jaliminche <lokesh.jaliminche@seagate.com>
Signed-off-by: Jian Yu <jian.yu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1882
Seagate-bug-id: MRP-1192
Reviewed-on: http://review.whamcloud.com/20061
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bobi Jam [Sun, 29 Jan 2017 00:05:05 +0000 (19:05 -0500)]
staging: lustre: llite: specify READA debug mask for ras_update
So that debug log only contains relevant messages for debugging
purpose.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8413
Reviewed-on: http://review.whamcloud.com/22753
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Sun, 29 Jan 2017 00:05:04 +0000 (19:05 -0500)]
staging: lustre: header: remove assert from interval_set()
In the case of interval_tree.h only interval_set()
uses LASSERT which is removed in this patch and
interval_set() instead reports a real error. The
header libcfs.h for interval_tree.h is not needed
anymore so we can just use the standard linux
kernel headers instead.h
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6401
Reviewed-on: https://review.whamcloud.com/22522
Reviewed-on: https://review.whamcloud.com/24323
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bobi Jam [Sun, 29 Jan 2017 00:05:03 +0000 (19:05 -0500)]
staging: lustre: lov: ld_target could be NULL
lov_device::ld_target[ost_idx] could be NULL if the OST target is
not filled in lov_device::ld_lov::lov_tgt_desc[ost_idx] yet.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8018
Reviewed-on: http://review.whamcloud.com/21411
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Sun, 29 Jan 2017 00:05:02 +0000 (19:05 -0500)]
staging: lustre: libcfs: default CPT matches NUMA topology
Change default value of CPT pattern and make it match NUMA topology
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5050
Reviewed-on: http://review.whamcloud.com/22377
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Sun, 29 Jan 2017 00:05:01 +0000 (19:05 -0500)]
staging: lustre: libcfs: avoid stomping on module param cpu_pattern
The function cfs_cpt_table_create_pattern() alters the string
passed to it. Currently we are passing in the module parameter
string cpu_pattern which is incorrect. Instead lets duplicate
the module parameter string and pass that to the function
cfs_cpt_table_create_pattern().
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5050
Reviewed-on: http://review.whamcloud.com/22377
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jinshan Xiong [Sun, 29 Jan 2017 00:05:00 +0000 (19:05 -0500)]
staging: lustre: osc: limits the number of chunks in write RPC
OSC has to make sure that it won't issue write RPCs with too many
chunks otherwise it will casue ZFS to create transactions much
bigger than DMU_MAX_ACCESS in size, which will end up with write
failure.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8135
Reviewed-on: http://review.whamcloud.com/22369
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8632
Reviewed-on: http://review.whamcloud.com/22654
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Patrick Farrell <paf@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niu Yawei [Sun, 29 Jan 2017 00:04:59 +0000 (19:04 -0500)]
staging: lustre: clio: sync write should update mtime
Sync write should update m/ctime promptly, otherwise, stale m/ctime
could be updated on the OST object by the sync write RPC.
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7310
Reviewed-on: http://review.whamcloud.com/21063
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fan Yong [Sun, 29 Jan 2017 00:04:58 +0000 (19:04 -0500)]
staging: lustre: ptlrpc: comment for FLD_QUERY RPC reply swab
The 'fld_read_server' uses 'RMF_GENERIC_DATA' to hold the 'FLD_QUERY'
RPC reply that is composed of 'struct lu_seq_range_array'. But there
is not registered swabber function for 'RMF_GENERIC_DATA'. So the RPC
peers need to handle the RPC reply with fixed little-endian format.
In theory, we can define new structure with some swabber registered
to handle the 'FLD_QUERY' RPC reply result automatically. But from
the implementation view, it is not easy to be done within current
'struct req_msg_field' framework. Because the sequence range array
in the RPC reply is not fixed length, instead, its length depends
on 'lu_seq_range' count, that is unknown when prepare the RPC buffer.
Generally, for such flexible length RPC usage, there will be a field
in the RPC layout to indicate the data length. But for the 'FLD_READ'
RPC, we have no way to do that unless we add new length filed that
will broken the on-wire RPC protocol and cause interoperability
trouble with old peer.
Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6284
Reviewed-on: http://review.whamcloud.com/22309
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Sun, 29 Jan 2017 00:04:57 +0000 (19:04 -0500)]
staging: lustre: llite: Setting xattr are properly checked with and without ACLs
Setting extended attributes permissions are properly checked with and
without ACLs. In user.* namespace, only regular files and directories
can have extended attributes. For sticky directories, only the owner
and privileged user can write attributes.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1482
Reviewed-on: http://review.whamcloud.com/21496
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andriy Skulysh [Sun, 29 Jan 2017 00:04:56 +0000 (19:04 -0500)]
staging: lustre: ldlm: ASSERTION(flock->blocking_export!=0) failed
Whole policy structure was zeroed twice. Once during enqueue
and second time during resend or replay. Policy structure
should be initialized with default values only in ldlm_lock_new().
Signed-off-by: Andriy Skulysh <andriy.skulysh@seagate.com>
Signed-off-by: Ben Evans <bevans@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8349
Seagate-bug-id: MRP-2536, MRP-2909
Reviewed-on: http://review.whamcloud.com/21061
Reviewed-by: Alexander Boyko <alexander.boyko@seagate.com>
Reviewed-by: Vitaly Fertman <vitaly.fertman@seagate.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fan Yong [Sun, 29 Jan 2017 00:04:55 +0000 (19:04 -0500)]
staging: lustre: mgc: handle config_llog_data::cld_refcount properly
Originally, the logic of handling config_llog_data::cld_refcount
is some confusing, it may cause the cld_refcount to be leaked or
trigger "LASSERT(atomic_read(&cld->cld_refcount) > 0);" when put
the reference. This patch clean related logic as following:
1) When the 'cld' is created, its reference is set as 1.
2) No need additional reference when add the 'cld' into the list
'config_llog_list'.
3) Inrease 'cld_refcount' when set lock data after mgc_enqueue()
done successfully by mgc_process_log().
4) When mgc_requeue_thread() traversals the 'config_llog_list',
it needs to take additional reference on each 'cld' to avoid
being freed during subsequent processing. The reference also
prevents the 'cld' to be dropped from the 'config_llog_list',
then the mgc_requeue_thread() can safely locate next 'cld',
and then decrease the 'cld_refcount' for previous one.
5) mgc_blocking_ast() will drop the reference of 'cld_refcount'
that is taken in mgc_process_log().
6) The others need to call config_log_find() to find the 'cld'
if want to access related config log data. That will increase
the 'cld_refcount' to avoid being freed during accessing. The
sponsor needs to call config_log_put() after using the 'cld'.
7) Other confused or redundant logic are dropped.
On the other hand, the patch also enhances the protection for
'config_llog_data' flags, such as 'cld_stopping'/'cld_lostlock'
as following.
a) Use 'config_list_lock' (spinlock) to handle the possible
parallel accessing of these flags among mgc_requeue_thread()
and others config llog data visitors, such as mount/umount,
blocking_ast, and so on.
b) Use 'config_llog_data::cld_lock' (mutex) to pretect other
parallel accessing of these flags among kinds of blockable
operations, such as mount, umount, and blocking ast.
The 'config_llog_data::cld_lock' is also used for protecting
the sub-cld members, such as 'cld_sptlrpc'/'cld_params', and
so on.
Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8408
Reviewed-on: http://review.whamcloud.com/21616
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Hongchao Zhang <hongchao.zhang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Sun, 29 Jan 2017 00:04:54 +0000 (19:04 -0500)]
staging: lustre: llite: Trust creates in revalidate too.
By forcing creates to always go via lookup we lose some
important caching benefits too.
Instead let's trust creates with positive cached entries.
Then we have 3 possible outcomes:
1. Negative dentry - we go via atomic_open and do the create
by name there.
2. Positive dentry, no contention - we just go straight to
ll_intent_file_open and open by fid.
3. positive dentry, contention - by the time we reach the server,
the inode is gone. We get ENOENT which is unacceptable to return
from create. But since we know it's a create, we substitute it
with ESTALE and VFS retries again with LOOKUP_REVAL set, we catch
that in revalidate and force a lookup (same path as before this
patch).
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8371
Reviewed-on: http://review.whamcloud.com/21168
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lai Siyao [Sun, 29 Jan 2017 00:04:53 +0000 (19:04 -0500)]
staging: lustre: llite: normal user can't set FS default stripe
Current client doesn't check permission before updating filesystem
default stripe on MGS, which isn't secure and obvious.
Since we setattr on MDS first, and then set default stripe on MGS,
we can just return error upon setattr failure.
Now filesystem default stripe is stored in ROOT in MDT, so saving
it in system config is for compatibility with old servers, this
will be removed in the future.
Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8454
Reviewed-on: http://review.whamcloud.com/21612
Reviewed-on: http://review.whamcloud.com/22580
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Evans [Sun, 29 Jan 2017 00:04:52 +0000 (19:04 -0500)]
staging: lustre: lustre: Remove old commented out code
These #if 0 blocks have been in place for years. Assume
they are not used and remove them
Signed-off-by: Ben Evans <bevans@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8058
Reviewed-on: http://review.whamcloud.com/20416
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 29 Jan 2017 00:04:51 +0000 (19:04 -0500)]
staging: lustre: lmv: remove unused placement parameter
Remove the unused lmv.*.placement parameter along with supporting
functions and struct members.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7674
Reviewed-on: http://review.whamcloud.com/18019
Reviewed-by: Ben Evans <bevans@cray.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 29 Jan 2017 00:04:48 +0000 (19:04 -0500)]
staging: lustre: llite: remove obsolete comment for ll_unlink()
Remove obsolete comments about the behavior of ll_unlink()
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8003
Reviewed-on: http://review.whamcloud.com/19881
Reviewed-by: Andrew Perepechko <andrew.perepechko@seagate.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Sun, 29 Jan 2017 00:04:47 +0000 (19:04 -0500)]
staging: lustre: llite: handle inactive OSTs better in statfs
Change the order of checks for inactive OSCs in lov_prep_statfs_set()
so that administratively disabled OSTs do not generate any output in
"lfs df" at all, to avoid needlessly cluttering the output.
Enable the lazystatfs mount option by default, so that "df" does not
hang when an OST is temporarily offline.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7759
Reviewed-on: http://review.whamcloud.com/19195
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Boyko [Sun, 29 Jan 2017 00:04:46 +0000 (19:04 -0500)]
staging: lustre: ptlrpc: skip lock if export failed
This patch resolves IO vs eviction race.
After eviction failed export stayed at stale list,
a client had IO processing and reconnected during it.
A client sent brw rpc with last lock cookie and new connection.
The lock with failed export was found and assert was happened.
(ost_handler.c:1812:ost_prolong_lock_one())
ASSERTION( lock->l_export == opd->opd_exp ) failed:
1. Skip the lock at ldlm_handle2lock if lock export failed.
2. Validation of lock for IO was added at hpreq_check(). The lock
searching is based on granted interval tree. If server doesn`t
have a valid lock, it reply to client with ESTALE.
Signed-off-by: Alexander Boyko <alexander.boyko@seagate.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7702
Seagate-bug-id: MRP-2787
Reviewed-on: http://review.whamcloud.com/18120
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Vitaly Fertman <vitaly.fertman@seagate.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Zhuravlev [Sun, 29 Jan 2017 00:04:45 +0000 (19:04 -0500)]
staging: lustre: obdclass: do not call lu_site_purge() for single object exceed
First of all, this is expensive procedure including a global
mutex and per-bucket spinlocks. also, all the threads observed
exceed will be calling lu_site_purge() and essentially serialized
on that. instead we can let other threads to skip the whole
procedure.
Signed-off-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7896
Reviewed-on: http://review.whamcloud.com/19082
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jinshan Xiong [Sun, 29 Jan 2017 00:04:44 +0000 (19:04 -0500)]
staging: lustre: llite: don't ignore layout for group lock request
ignore_layout can be set for operations that layout won't be changed,
typically page operations. Ignoring layout change in group lock
request will confuse layout change code at LOV layer and hit
assertion.
Signed-off-by: Henri Doreau <henri.doreau@cea.fr>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2766
Reviewed-on: http://review.whamcloud.com/6828
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
frank zago [Sun, 29 Jan 2017 00:04:43 +0000 (19:04 -0500)]
staging: lustre: hsm: stack overrun in hai_dump_data_field
The function hai_dump_data_field will do a stack buffer
overrun when cat'ing /sys/fs/lustre/.../hsm/actions if an action has
some data in it.
hai_dump_data_field uses snprintf. But there is no check for
truncation, and the value returned by snprintf is used as-is. The
coordinator code calls hai_dump_data_field with 12 bytes in the
buffer. The 6th byte of data is printed incompletely to make room for
the terminating NUL. However snprintf still returns 2, so when
hai_dump_data_field writes the final NUL, it does it outside the
reserved buffer, in the 13th byte of the buffer. This stack buffer
overrun hangs my VM.
Fix by checking that there is enough room for the next 2 characters
plus the NUL terminator. Don't print half bytes. Change the format to
02X instead of .2X, which makes more sense.
Signed-off-by: frank zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8171
Reviewed-on: http://review.whamcloud.com/20338
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jean-Baptiste Riaux <riaux.jb@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ulka Vaze [Sun, 29 Jan 2017 00:04:40 +0000 (19:04 -0500)]
staging: lustre: lmv: Error not handled for lmv_find_target
This issue is found by smatch; has been reported as-
Unchecked usage of potential ERR_PTR result in lmv_hsm_req_count
and lmv_hsm_req_build. Added ERR_PTR in both functions and also
return value check added.
Signed-off-by: Ulka Vaze <ulka.vaze@yahoo.in>
Signed-off-by: Aditya Pandit <panditadityashreesh@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6523
Reviewed-on: http://review.whamcloud.com/14918
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ann Koehler [Sun, 29 Jan 2017 00:04:39 +0000 (19:04 -0500)]
staging: lustre: obd: RCU stalls in lu_cache_shrink_count()
The algorithm for counting freeable objects in the lu_cache shrinker
does not scale with the number of cpus. The LU_SS_LRU_LEN counter
for each cpu is read and summed at shrink time while holding the
lu_sites_guard mutex. With a large number of cpus and low memory
conditions, processes bottleneck on the mutex.
This mod reduces the time spent counting by using the kernel's percpu
counter functions to maintain the length of a site's lru. The summing
occurs when a percpu value is incremented or decremented and a
threshold is exceeded. lu_cache_shrink_count() simply returns the
last such computed sum.
This mod also replaces the lu_sites_guard mutex with a rw semaphore.
The lock protects the lu_site list, which is modified when a file
system is mounted/umounted or when the lu_site is purged.
lu_cache_shrink_count simply reads data so it does not need to wait
for other readers. lu_cache_shrink_scan, which actually frees the
unused objects, is still serialized.
Signed-off-by: Ann Koehler <amk@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7997
Reviewed-on: http://review.whamcloud.com/19390
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Giuseppe Di Natale [Sun, 29 Jan 2017 00:04:37 +0000 (19:04 -0500)]
staging: lustre: lmv: Correctly generate target_obd
The target_obd debugfs file was not being generated correctly
in cases where nonconsecutive MDT indices were used when
generating a filesystem.
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8100
Reviewed-on: http://review.whamcloud.com/20336
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeremy Filizetti [Sun, 29 Jan 2017 00:04:36 +0000 (19:04 -0500)]
staging: lustre: ldlm: Restore connect flags on failure
Restore connect flags on failure of ptlrpc_connect_import()
to prevent an LBUG due to flags mismatch.
Signed-off-by: Jeremy Filizetti <jeremy.filizetti@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7185
Reviewed-on: http://review.whamcloud.com/16950
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Sebastien Buisson <sebastien.buisson@bull.net>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niu Yawei [Sun, 29 Jan 2017 00:04:35 +0000 (19:04 -0500)]
staging: lustre: ptlrpc: set proper mbits for EINPROGRESS resend
Set mbits for EINPROGRESS resend in ptl_send_rpc().
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8193
Reviewed-on: http://review.whamcloud.com/20377
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jinshan Xiong [Sun, 29 Jan 2017 00:04:34 +0000 (19:04 -0500)]
staging: lustre: clio: revise readahead to support 16MB IO
Read ahead currently doesn't handle 16MB RPC packets correctly
by assuming the packets are a default size instead of querying
the size. This work adjust the read ahead policy to issue
read ahead RPC by the underlying RPC size.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Gu Zheng <gzheng@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7990
Reviewed-on: http://review.whamcloud.com/19368
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Li Xi <lixi@ddn.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Sun, 29 Jan 2017 00:04:32 +0000 (19:04 -0500)]
staging: lustre: mdc: quiet console message for known -EINTR
If a user process is waiting for MDS recovery during close, but the
process is interrupted, the file is still closed but it prints a
message on the console. Quiet the console message for -EINTR, since
this is expected behaviour.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6627
Reviewed-on: http://review.whamcloud.com/14911
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bobi Jam [Sun, 29 Jan 2017 00:04:31 +0000 (19:04 -0500)]
staging: lustre: clio: add cl_page LRU shrinker
Register cache shrinker to reclaim memory from cl_page LRU list.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6842
Reviewed-on: http://review.whamcloud.com/15630
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lai Siyao [Sun, 29 Jan 2017 00:04:30 +0000 (19:04 -0500)]
staging: lustre: statahead: drop support for remote entry
This patch dropped support for remote entry statahead, because it
needs 2 async RPCs to fetch both LOOKUP lock from parent MDT and
UPDATE lock from client MDT, which is complicated. Plus not
supporting remote entry statahead won't cause any issue.
* pack child fid in statahead request.
* lmv_intent_getattr_async() will compare parent and child MDT,
if child is remote, return -ENOTSUPP.
Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6578
Reviewed-on: http://review.whamcloud.com/15767
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jinshan Xiong [Sun, 29 Jan 2017 00:04:29 +0000 (19:04 -0500)]
staging: lustre: llite: Remove access of stripe in ll_setattr_raw
In ll_setattr_raw(), it needs to know if a file is released
when the file is being truncated. It used to get this information
by accessing lov_stripe_md. This turns out not necessary. This
patch removes the access of lov_stripe_md and solves the problem
in lov_io_init_released().
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5823
Reviewed-on: http://review.whamcloud.com/13514
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Henri Doreau <henri.doreau@cea.fr>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Karamihov [Tue, 31 Jan 2017 19:24:56 +0000 (21:24 +0200)]
staging: rtl8188eu: remove not necessary braces {} (checkpatch fix)
This is checkpatch fix for hal/bb_cfg.c file:
remove not necessary braces {}
Signed-off-by: Martin Karamihov <martinowar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masanari Iida [Wed, 1 Feb 2017 11:05:07 +0000 (20:05 +0900)]
staging: greybus: Remove duplicate include file
This patch removed duplicated include line.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Thu, 2 Feb 2017 12:12:02 +0000 (12:12 +0000)]
staging: rts5208: remove unncessary result set and check, just return SUCCESS
Minor clean up, there is no need to assign result to zero, then
check if it is less than zero. Just return SUCCESS.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Thu, 2 Feb 2017 12:12:01 +0000 (12:12 +0000)]
staging: rts5208: remove redundant retval status check
The retval status checks in the proceeding do loop return out
of function ms_read_attritbute_info if there is an error
condition, thus we never reach the end of the loop with
retval failed status. Therefore, the retval status check
at end of the do loop is redundant and can be removed.
Detected with CoverityScan, CID#143000 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 2 Feb 2017 14:43:42 +0000 (15:43 +0100)]
staging: fbtft: change 'gamma' array to u32
Having a local variable of 1024 bytes on 64-bit architectures is a bit
too much, and I ran into this warning while trying to see what functions
use the largest stack:
drivers/staging/fbtft/fbtft-sysfs.c: In function 'store_gamma_curve':
drivers/staging/fbtft/fbtft-sysfs.c:132:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=]
As there is no need for 64-bit gamma values (on 32-bit architectures,
we don't use those either), I'm changing the type from 'unsigned long'
to 'u32' here, which cuts the required space in half everywhere.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 2 Feb 2017 14:38:24 +0000 (15:38 +0100)]
staging: rtl8192u: move stats_IndicateArray off stack
Putting 128 pointers on the stack is rather wasteful, in particular
on 64-bit architectures:
drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c: In function 'RxPktPendingTimeout':
drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c:92:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=]
The rtl8192e driver has the exact same function, except that stores the
array in its 'ieee' structure. Let's do it the same way here for consistency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 2 Feb 2017 12:15:32 +0000 (13:15 +0100)]
staging: bcm2835: don't mark 'bcm2835_v4l2_debug' as static
This one unfortunately slipped through my own build testing, my patch
caused a new build error:
bcm2835-camera.c:53:12: error: static declaration of 'bcm2835_v4l2_debug' follows non-static declaration
We want the symbol to be global as it is indeed used in more than one
file and declared 'extern' in a header.
Fixes:
757b9bd074 ("staging: bcm2835: mark all symbols as 'static'")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arushi [Wed, 1 Feb 2017 19:19:42 +0000 (00:49 +0530)]
staging: rtl8192e: Aligning the * on each line in block comments
This patch fixes the issue by aligning the * on each line in block comments.
Signed-off-by: Arushi <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Kershner [Wed, 1 Feb 2017 22:39:00 +0000 (17:39 -0500)]
staging: unisys: visorbus: get rid of unused payload info
We no longer send payloads back to the s-Par firmware, we can get rid of
the initialize and destroy functions since they weren't actually being
used just created and destroyed.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: David Binder <david.binder@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Kershner [Wed, 1 Feb 2017 22:38:59 +0000 (17:38 -0500)]
staging: unisys: visorbus: remove putfile data structures
There were several unused data structures dealing with putfile that are no
longer being used. So get rid of them.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Sell [Wed, 1 Feb 2017 22:38:58 +0000 (17:38 -0500)]
staging: unisys: visornic: prevent hang doing 'modprobe -r visornic'
A stray+extraneous 'netif_napi_add()' that we were doing in
visornic_probe() was causing havoc when we got into visornic_remove(),
called during 'modprobe -r visornic'. The symptom was a processor busy-wait
loop on the modprobe process, which '/proc/<pid>/stack' would show looping
doing napi things.
Presumably the stray line got there as a result of some merging snafoo, and
has been deleted to fix the problem. With this patch 'modprobe -r visornic'
and a subsequent 'modprobe visornic' both complete successfully, and result
in an operational network.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Binder [Wed, 1 Feb 2017 22:38:56 +0000 (17:38 -0500)]
staging: unisys: visorbus: Consolidate kobject functions
Simplifies kobject usage in visorchipset.c by combining pairs of functions
that are better expressed combined.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Binder [Wed, 1 Feb 2017 22:38:55 +0000 (17:38 -0500)]
staging: unisys: visorbus: Check controlvm message payload size
Checks the controlvm message's payload size before copying it into a
parser_context struct's name region.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Binder [Wed, 1 Feb 2017 22:38:54 +0000 (17:38 -0500)]
staging: unisys: visorbus: Remove unused struct in visorchannel.c
Removes struct safe_uis_queue, which is within struct visorchannel. The
struct is not used anywhere in the s-Par drivers.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miquel Raynal [Tue, 31 Jan 2017 13:32:08 +0000 (14:32 +0100)]
staging: bcm2835-audio: fix style problem in vc_vchi_audioserv_defs.h
Remove spaces around parenthesized expression to conform to the
kernel coding style. Issue found by checkpatch.pl script.
Signed-off-by: Miquel Raynal <raynal.miquel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Wed, 1 Feb 2017 11:57:11 +0000 (11:57 +0000)]
staging: bcm2835-audio: use | instead of || otherwise result is just boolean 1
The incorrect or operator is being used resulting in cookies being
set to 1 (true) rather than the intended hex value. Fix this by
using | instead of ||.
Issue found with static analysis with cppcheck
Fixes:
0cec463e391e05b807a ("staging: bcm2835-audio: Simplify callback structure for write data")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 2 Feb 2017 11:26:51 +0000 (12:26 +0100)]
staging: lustre: remove CLASSERT macro
lustre uses a fake switch() statement as a compile-time assert, but unfortunately
each use of that causes a warning when building with clang:
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2907:2: warning: no case matching constant switch condition '42'
drivers/staging/lustre/lnet/klnds/socklnd/../../../include/linux/libcfs/libcfs_private.h:294:36: note: expanded from macro 'CLASSERT'
#define CLASSERT(cond) do {switch (42) {case (cond): case 0: break; } } while (0)
As Greg suggested, let's just kill off this macro completely instead of
fixing it. This replaces it with BUILD_BUG_ON(), which means we have
to negate all the conditions in the process.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 2 Feb 2017 11:34:11 +0000 (12:34 +0100)]
staging: bcm2835: mark all symbols as 'static'
I got a link error in allyesconfig:
drivers/staging/media/platform/bcm2835/bcm2835-camera.o: In function `vidioc_enum_framesizes':
bcm2835-camera.c:(.text.vidioc_enum_framesizes+0x0): multiple definition of `vidioc_enum_framesizes'
drivers/media/platform/vivid/vivid-vid-cap.o:vivid-vid-cap.c:(.text.vidioc_enum_framesizes+0x0): first defined here
While both drivers are equally at fault for this problem, the bcm2835 one was
just added and is easier to fix, as it is only one file, and none of its symbols
need to be globally visible. This marks the three global symbols as static.
Fixes:
7b3ad5abf027 ("staging: Import the BCM2835 MMAL-based V4L2 camera driver.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 1 Feb 2017 16:22:25 +0000 (17:22 +0100)]
staging: bcm2835-audio: fix empty-body warning
gcc-7 warns about debug statements being left out here:
drivers/staging/bcm2835-audio/bcm2835-vchiq.c: In function 'bcm2835_audio_set_ctls':
drivers/staging/bcm2835-audio/bcm2835-vchiq.c:572:54: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
It's better to use no_printk(), which has the added advantage of checking
the format strings.
Fixes:
23b028c871e1 ("staging: bcm2835-audio: initial staging submission")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 1 Feb 2017 16:21:19 +0000 (17:21 +0100)]
staging: bcm2835-audio: remove incorrect include path
The driver introduces a new instance of the missing-include-dirs warning that
is enabled at the "make W=1" level but has no other output:
cc1: error: /git/arm-soc/drivers/staging/vc04_services/interface/vcos/linuxkernel: No such file or directory [-Werror=missing-include-dirs]
In order to let us enable the warning by default in the future, we should
just remove the incorrect argument here.
Fixes:
23b028c871e1 ("staging: bcm2835-audio: initial staging submission")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 1 Feb 2017 16:15:06 +0000 (17:15 +0100)]
staging: bcm2835-v4l: remove incorrect include path
The driver introduces a new instance of the missing-include-dirs warning that
is enabled at the "make W=1" level but has no other output:
cc1: error: drivers/staging/vc04_services/interface/vcos/linuxkernel: No such file or directory [-Werror=missing-include-dirs]
cc1: all warnings being treated as errors
scripts/Makefile.build:307: recipe for target 'drivers/staging/media/platform/bcm2835/bcm2835-camera.o' failed
In order to let us enable the warning by default in the future, we should
just remove the incorrect argument here.
Fixes:
97b35807cc4d ("staging: bcm2835-v4l2: Add a build system for the module.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Wed, 1 Feb 2017 14:31:54 +0000 (06:31 -0800)]
staging: bcm2835/mmal-vchiq: Replace call to vchi_msg_queue with vchi_queue_kernel_message
The function vchi_msg_queue was made static in vc04_services
and replaced with vchi_queue_kernel_message.
Change the call to vchi_msg_queue to vchi_queue_kernel_message
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Wed, 1 Feb 2017 14:31:53 +0000 (06:31 -0800)]
staging: bcm2835-audio: Replace call to vchi_msg_queue with vchi_queue_kernel_message
The function vchi_msg_queue was made static in vc04_services
and replaced with vchi_queue_kernel_message.
Change the call to vchi_msg_queue to vchi_queue_kernel_message
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 2 Feb 2017 10:26:23 +0000 (11:26 +0100)]
Merge tag 'iio-for-4.11c' of git://git./linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Third set of new device support, features and cleanups for IIO in the 4.11 cycle
This also involves a merge of the ib-mid-iio-pwm-4.11 branch from mfd to
bring in support for the stm32 timer triggers needed for the buffered
features in the stm32 adc driver.
New device support:
* Amligic Meson SAR ADC
- new driver and bindings
* cros_ec barometer
- new driver
* max5481 digital potentiometers
- new driver for 5481, 5482, 5483 and 5484
* Renesas GyroADC - a very specific spi offload engine for ADCs
- new driver and bindings.
* srf08 ultrasonic ranger
- new driver, bindings and ABI docs,
New features
* Qualcomm PM8xxx ADC bindings.
- due to a trivial build issues the driver will be following shortly.
* stm32 ADC
- Triggered buffer mode
- Allow use of stm32 timer triggers
- Add trigger polarity control
- Optional DMA support with bindings update
* stx104
- add support for gpio names
- support set_multiple callback
* tmp007
- optional interrupt support
Cleanups
* ad7150
- alignment fix.
* ad7816
- octal rather than symbolic permissions.
* lsm6dsx
- allow selection of data ready pin via device tree bindings.
* ssp_sensors
- use devm_iio_device_register to handle unregister automatically.
* stx104
- use devm functions in probe allowing removal or the remove function.
- drop unneeded struct stx104_dev
* tmp007
- fix the name attribute to be a meaninful description of the part.
William Breathitt Gray [Thu, 19 Jan 2017 15:06:16 +0000 (10:06 -0500)]
iio: stx104: Add GPIO set_multiple callback function support
The Apex Embedded Systems STX104 series provides a digital output
register where 4 lines may be set at a time. This patch add support for
the set_multiple callback function, thus allowing multiple digital
output lines to be set more efficiently in groups.
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Walleij [Tue, 17 Jan 2017 14:25:13 +0000 (15:25 +0100)]
iio: adc: add device tree bindings for Qualcomm PM8xxx ADCs
This adds the device tree bindings for the Qualcomm PM8xxx
ADCs. This is based on the existing DT bindings for the
SPMI ADC so there are hopefully no controversial features.
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: Ivan T. Ivanov <iivanov.xz@gmail.com>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Rama Krishna Phani A <rphani@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
William Breathitt Gray [Mon, 30 Jan 2017 17:16:04 +0000 (12:16 -0500)]
iio: stx104: Add support for GPIO names
This patch sets the gpio_chip names option with an array of GPIO line
names that match the manual documentation for the Apex Embedded Systems
STX104. This should make it easier for users to identify which GPIO line
corresponds to a respective GPIO pin on the device.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Michael Zoran [Mon, 30 Jan 2017 07:31:11 +0000 (23:31 -0800)]
staging: vc04_services: Make vchi_msg_queue static
The vchi_msg_queue function which is used by other drivers
to queue a message is difficult to understand and overly
generic.
Make the function static and remove it from the exported
symbols.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Mon, 30 Jan 2017 07:31:10 +0000 (23:31 -0800)]
staging: vc04_services: Add vchi_queue_user_message function
The vchi_msg_queue function which is used by other drivers
to queue a message is difficult to understand and overly
generic.
Add a new function which is a wrapper on top of vchi_msg_queue
that is specifically for queuing a message located in user
address space.
int
vchi_queue_user_message(VCHI_SERVICE_HANDLE_T handle,
void __user *data,
unsigned int size)
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Mon, 30 Jan 2017 07:31:09 +0000 (23:31 -0800)]
staging: vc04_services: Add vchi_queue_kernel_message function
The vchi_msg_queue function which is used by other drivers
to queue a message is difficult to understand and overly
generic.
Add a new function which is a wrapper on top of vchi_msg_queue
that is specifically for queuing a message located in kernel
address space.
int
vchi_queue_kernel_message(VCHI_SERVICE_HANDLE_T handle,
void *data,
unsigned int size)
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Sun, 29 Jan 2017 05:39:45 +0000 (21:39 -0800)]
staging: bcm2835-audio: Simplify callback structure for write data
The device sends data to the audio devices by sending a message with
the data through VC04_SERVICES/VCHIQ. This message contains a
callback pointer that is always filled in with the same function.
This is prone to corruption issues.
Instead fill the callback fields with a fixed cookie value to perforam
some validation on the message response and call the handler function
directly instead of through the callback pointer.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Sun, 29 Jan 2017 05:39:44 +0000 (21:39 -0800)]
staging: bcm2835-audio: Remove code for non device tree init
The bcm2835-audio driver has a legacy code path for initializing
devices without a device tree. Delete this code path and remove
the non device tree devices.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Sun, 29 Jan 2017 14:39:09 +0000 (06:39 -0800)]
staging: bcm2835-audio: Add TODO list
Add a TODO list of possible cleanup items.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Anholt [Fri, 27 Jan 2017 21:55:03 +0000 (13:55 -0800)]
staging: bcm2835-v4l2: Apply spelling fixes from checkpatch.
Generated with checkpatch.pl --fix-inplace and git add -p out of the
results.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Anholt [Fri, 27 Jan 2017 21:55:02 +0000 (13:55 -0800)]
staging: bcm2835-v4l2: Apply many whitespace fixes from checkpatch.
Generated with checkpatch.pl --fix-inplace, some manual fixes for
cases where checkpatch fixed one out of multiple lines of mis-indented
function parameters, and then git add -p out of the results.
I skipped some fixes that should probably instead be replaced with the
BIT() macro.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Anholt [Fri, 27 Jan 2017 21:55:01 +0000 (13:55 -0800)]
staging: bcm2835-v4l2: Add a TODO file for improvements we need.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Anholt [Fri, 27 Jan 2017 21:55:00 +0000 (13:55 -0800)]
staging: bcm2835-v4l2: Add a build system for the module.
This is derived from the downstream tree's build system, but with just
a single Kconfig option.
For now the driver only builds on 32-bit arm -- the aarch64 build
breaks due to the driver using arm-specific cache flushing functions.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Anholt [Fri, 27 Jan 2017 21:54:59 +0000 (13:54 -0800)]
staging: bcm2835-v4l2: Update the driver to the current VCHI API.
49bec49fd7f2 ("staging: vc04_services: remove vchiq_copy_from_user")
removed the flags/msg_handle arguments, which were unused, and pushed
the implementation of copying using memcpy vs copy_from_user to the
caller.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Anholt [Fri, 27 Jan 2017 21:54:58 +0000 (13:54 -0800)]
staging: Import the BCM2835 MMAL-based V4L2 camera driver.
- Supports raw YUV capture, preview, JPEG and H264.
- Uses videobuf2 for data transfer, using dma_buf.
- Uses 3.6.10 timestamping
- Camera power based on use
- Uses immutable input mode on video encoder
This code comes from the Raspberry Pi kernel tree (rpi-4.9.y) as of
a15ba877dab4e61ea3fc7b006e2a73828b083c52.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masanari Iida [Mon, 30 Jan 2017 03:32:31 +0000 (12:32 +0900)]
staging: unisys: visornic: Fix typo in visornic_main.c
This patch fix some spelling typos found in visornic_main.c
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Pylypiv [Tue, 31 Jan 2017 05:39:54 +0000 (21:39 -0800)]
staging: wlan-ng: add missing byte order conversion
Conversion macros le16_to_cpu was removed and that caused new sparse warning
sparse output:
drivers/staging/wlan-ng/p80211netdev.c:241:44: warning: incorrect type in argument 2 (different base types)
drivers/staging/wlan-ng/p80211netdev.c:241:44: expected unsigned short [unsigned] [usertype] fc
drivers/staging/wlan-ng/p80211netdev.c:241:44: got restricted __le16 [usertype] fc
Fixes:
7ad82572348c ("staging:wlan-ng:Fix sparse warning")
Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vitali Liaukovich [Sat, 28 Jan 2017 11:02:40 +0000 (13:02 +0200)]
Staging: speakup: speakup_bns: fix comment
Fixed comment formatting issue.
Signed-off-by: Vitali Liaukovich <vitali.liaukovich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Derek Robson [Sat, 28 Jan 2017 06:35:01 +0000 (19:35 +1300)]
Staging: speakup - syle fix permissions to octal
A style fix across whole driver.
changed permissions to octal style, found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lars-Peter Clausen [Mon, 30 Jan 2017 10:18:25 +0000 (11:18 +0100)]
iio: tmp007: Fix `name` attribute ABI
The IIO ABI specifies the name field of the IIO device as:
Description of the physical chip / device for device X.
Typically a part number.
The tmp007 driver currently uses the name of the parent device instead.
Change this to the part name to be in accordance with the ABI.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
William Breathitt Gray [Mon, 30 Jan 2017 13:58:50 +0000 (08:58 -0500)]
iio: stx104: Remove unneeded struct stx104_dev code
The stx104_dev structure was used to hold private data for use in the
stx104_remove function. Now that the stx104_remove function is gone, the
stx104_dev structure and relevant code is no longer needed. This patch
removes the unnecessary code.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fabrice Gasnier [Thu, 26 Jan 2017 14:28:33 +0000 (15:28 +0100)]
iio: adc: stm32: add optional dma support
Add DMA optional support to STM32 ADC, as there is a limited number DMA
channels (request lines) that can be assigned to ADC. This way, driver
may fall back using interrupts when all DMA channels are in use for
other IPs.
Use dma cyclic mode with two periods. Allow to tune period length by
using watermark. Coherent memory is used for dma (max buffer size is
fixed to PAGE_SIZE).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fabrice Gasnier [Thu, 26 Jan 2017 14:28:32 +0000 (15:28 +0100)]
Documentation: dt: iio: stm32-adc: optional dma support
STM32 ADC can use dma. Add dt documentation for optional dma support.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fabrice Gasnier [Thu, 26 Jan 2017 14:28:31 +0000 (15:28 +0100)]
iio: adc: stm32: add trigger polarity extended attribute
Define extended attribute so that user may choose rising, falling or both
edges for external trigger sources.
Default to rising edge in case it isn't set.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fabrice Gasnier [Thu, 26 Jan 2017 14:28:30 +0000 (15:28 +0100)]
iio: adc: stm32: Enable use of stm32 timer triggers
STM32 ADC has external timer trigger sources. Use stm32 timer triggers
API (e.g. is_stm32_timer_trigger()) with local ADC lookup table to
validate a trigger can be used.
This also provides correct trigger selection value (e.g. extsel).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fabrice Gasnier [Thu, 26 Jan 2017 14:28:29 +0000 (15:28 +0100)]
iio: adc: stm32: add support for triggered buffer mode
STM32 ADC conversions can be launched using hardware triggers.
It can be used to start conversion sequences (group of channels).
Selected channels are select via sequence registers.
Trigger source is selected via 'extsel' (external trigger mux).
Trigger polarity is set to rising edge by default.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jonathan Cameron [Sat, 28 Jan 2017 18:21:49 +0000 (18:21 +0000)]
Merge tag 'ib-mfd-iio-pwm-4.11' into test
Immutable branch between MFD, IIO and PWM due for the v4.11 merge window
Pulled into IIO to allow follow up series of triggered capture for the
STM32 ADCs.
Andreas Klinger [Wed, 25 Jan 2017 19:07:47 +0000 (20:07 +0100)]
iio: distance: srf08: add driver ABI documentation
Add sysfs-bus-iio-distance-srf08 for individual attributes of the driver,
especially:
- sensitivity which the device documentation calls gain for amplifying the
signal
- max_range for limiting the maximum distance for expected echos and
therefore limiting the time waiting for telegrams
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Andreas Klinger [Wed, 25 Jan 2017 19:07:19 +0000 (20:07 +0100)]
iio: distance: srf08: add IIO driver for us ranger
This is the IIO driver for devantech srf08 ultrasonic ranger which can be
used to measure the distances to an object.
The sensor supports I2C with some registers.
Supported Features include:
- read the distance in ranging mode in centimeters
- output of the driver is directly the read value
- together with the scale the driver delivers the distance in meters
- only the first echo of the nearest object is delivered
- set sensitivity as analog value in the range of 0-31 means setting
gain register on device
- set range registers; userspace enters max. range in millimeters in
43 mm steps
Features not supported by this driver:
- ranging mode in inches or in microseconds
- ANN mode
- change I2C address through this driver
- light sensor
The driver was added in the directory "proximity" of the iio subsystem and
the menu in den config is now called "Proximity and distance sensors"
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Andreas Klinger [Wed, 25 Jan 2017 19:06:48 +0000 (20:06 +0100)]
iio: distance: srf08: add trivial DT binding
- Add DT binding for devantech,srf08
- Add vendor devantech to vendor list
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Gwendal Grignou [Tue, 24 Jan 2017 13:41:41 +0000 (14:41 +0100)]
iio: cros_ec: Add cros_ec barometer driver
Handle the barometer sensor presented by the ChromeOS EC Sensor hub.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo Serra <enric.balletbo@collabora.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
William Breathitt Gray [Tue, 24 Jan 2017 20:26:17 +0000 (15:26 -0500)]
iio: stx104: Utilize devm_ functions in driver probe callback
The devm_ resource manager functions allow memory to be automatically
released when a device is unbound. This patch takes advantage of the
resource manager functions and replaces the gpiochip_add_data call and
iio_device_register call with the devm_gpiochip_add_data call and
devm_iio_device_register call respectively. In addition, the
stx104_remove function has been removed as no longer necessary due to
the use of the relevant devm_ resource manager functions.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lorenzo Bianconi [Sun, 22 Jan 2017 18:32:25 +0000 (19:32 +0100)]
Documentation: dt: iio: imu: st_lsm6dsx: add st,drdy-int-pin property
Add st,drdy-int-pin property to select interrupt pin of the package
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lorenzo Bianconi [Sun, 22 Jan 2017 18:32:24 +0000 (19:32 +0100)]
iio: imu: st_lsm6dsx: add possibility to select drdy pin
Add capability to route data ready signal on pin 1 or pin 2 of the package
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Martin Blumenstingl [Sun, 22 Jan 2017 18:17:13 +0000 (19:17 +0100)]
iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs
This adds support for the SAR (Successive Approximation Register) ADC
on the Amlogic Meson SoCs.
The code is based on the public S805 (Meson8b) and S905 (GXBB)
datasheets (see [0] and [1]), as well as by reading (various versions
of) the vendor driver and by inspecting the registers on the vendor
kernels of my testing-hardware.
Currently the GXBB, GXL and GXM SoCs are supported. GXBB hardware has
10-bit ADC resolution, while GXL and GXM have 12-bit ADC resolution.
The code was written to support older SoCs (Meson8 and Meson8b) as well,
but due to lack of actual testing-hardware no of_device_id was added for
these.
Two "features" from the vendor driver are currently missing:
- the vendor driver uses channel #7 for calibration (this improves the
accuracy of the results - in my tests the results were less than 3%
off without calibration compared to the vendor driver). Adding support
for this should be easy, but is not required for most applications.
- channel #6 is connected to the SoCs internal temperature sensor.
Adding support for this is probably not so easy since (based on the
u-boot sources) most SoC versions are using different registers and
algorithms for the conversion from "ADC value" to temperature.
Supported by the hardware but currently not supported by the driver:
- reading multiple channels at the same time (the hardware has a FIFO
buffer which stores multiple results)
- continuous sampling (this would require a way to enable this
individually because otherwise the ADC would be drawing power
constantly)
- interrupt support (similar to the vendor driver this new driver is
polling the results. It is unclear if the IRQ-mode is supported on
older (Meson6 or Meson8) hardware as well or if there are any errata)
[0]
http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%
2020150126.pdf
[1] http://dn.odroid.com/S905/DataSheet/S905_Public_Datasheet_V1.1.4.pdf
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Martin Blumenstingl [Sun, 22 Jan 2017 18:17:12 +0000 (19:17 +0100)]
Documentation: dt-bindings: add the Amlogic Meson SAR ADC documentation
This adds the devicetree binding documentation for the SAR ADC found in
Amlogic Meson SoCs.
Currently only the GXBB, GXL and GXM SoCs are supported.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Julián de Gortari [Mon, 23 Jan 2017 18:08:29 +0000 (12:08 -0600)]
Staging: iio: adc: ad7816: fix symbolic permissions coding style issue
Octal permissions should be used instead of symbolic ones for easier
reading.
Signed-off-by: Julián de Gortari <kiototeko@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Anthony Brandon [Mon, 23 Jan 2017 13:14:12 +0000 (14:14 +0100)]
drivers:staging:iio:cdc: Style fix.
Align parameters to parentheses.
Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>