OSDN Git Service
Clemens Ladisch [Thu, 11 Oct 2007 12:15:06 +0000 (14:15 +0200)]
[ALSA] mpu-401: do not require an ACK byte for the ENTER_UART command
The original MPU-401 does not send an ACK byte after processing the
ENTER_UART command, so we better do not try to wait for it.
Many clones get this wrong and do send an ACK, but when interpreting it
as MIDI, it is just a harmless Active Sensing message, and it is likely
to be read and discarded by the interrupt handler before the MIDI input
device is triggered.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Thu, 11 Oct 2007 12:35:00 +0000 (14:35 +0200)]
[ALSA] via82xx - Add DXS quirk for Shuttle AK31v2
Shuttle AK31v2 works well with dxs_support=5 (ALSA bug#2926).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Thu, 11 Oct 2007 09:21:21 +0000 (11:21 +0200)]
[ALSA] hda-codec - Fix input_mux numbers for vaio stac92xx
My bad, I forgot to update the num_items field when added a new item
to vaio_mux items table, so the last item 'PCM' disappeared.
Now it has the right number 3.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Tim Gardner [Wed, 10 Oct 2007 08:42:00 +0000 (10:42 +0200)]
[ALSA] hda-codec - Re-add quirk support for Dell XPS 1330 and Inspiron 1420
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Wed, 10 Oct 2007 08:06:46 +0000 (10:06 +0200)]
[ALSA] pcxhr - Fix dB level information
Some dB level information is wrong in pcxhr driver according to the
datasheet. Fixed now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Wed, 10 Oct 2007 08:04:26 +0000 (10:04 +0200)]
[ALSA] hda-codec - Fix Gateway laptops with STAC9200
Fix the output of Gateway laptops with STAC9200 codec chip.
They require the EAPD control for some pins. These pins shouldn't be
powered down.
To enable EAPD control, a new model 'gateway' was added to STAC9200.
The known PCI SSIDs are included in the quirk list.
The fix was originally suggested by Brian Hinz, in ALSA bug#2948.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Tue, 9 Oct 2007 09:58:41 +0000 (11:58 +0200)]
[ALSA] hda-codec - Add zero checks in input-mux helper functions
Added zero checks in input-mux helper functions to avoid Oops.
Some devices may have no input pins while the driver registers
control elements calling these functions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Mariusz Kozlowski [Tue, 9 Oct 2007 08:34:06 +0000 (10:34 +0200)]
[ALSA] sound: snd_register_device_for_dev fix
snd_register_device_for_dev() can oops when device_create() returns
ERR_PTR(err).
Scenario:
preg->dev = device_create(...); /* fails */
if (preg->dev) /* contains ERR_PTR(err) */
dev_set_drvdata(preg->dev, private_data);
and dev_set_drvdata() looks like this:
static inline void
dev_set_drvdata (struct device *dev, void *data)
{
dev->driver_data = data; <--- boom
}
This patch should prevent that.
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
James Courtier-Dutton [Mon, 8 Oct 2007 17:49:43 +0000 (18:49 +0100)]
[ALSA] snd-usb-audio: Add basic support for E-Mu USB devices.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Andrew Morton [Fri, 21 Sep 2007 21:25:00 +0000 (23:25 +0200)]
[ALSA] git-alsa kconfig fix
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Randy Dunlap [Fri, 21 Sep 2007 16:25:40 +0000 (18:25 +0200)]
[ALSA] sound/hda: fix help text
Fix hda help text typo.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Peer Chen [Fri, 21 Sep 2007 16:20:25 +0000 (18:20 +0200)]
[ALSA] alsa: Add the MCP79 support to hda_intel driver
Add the MCP79 support to hda driver.
The patch base on kernel 2.6.23-rc7
Signed-off-by: Peer Chen <peerchen@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Thu, 20 Sep 2007 15:34:57 +0000 (17:34 +0200)]
[ALSA] Workaround for invalid signature read of CS8427
Reading the signature of CS8427 over SPI/I2C fails on some devices
by mysterious reason. In most cases, however, it succeeds at the
sequential read. So, let's give a second chance to check the signature
again.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Kailang Yang [Thu, 20 Sep 2007 10:51:39 +0000 (12:51 +0200)]
[ALSA] hda-codec - Missing support ASUS A7J
Added the missing support for ASUS A7J [0x1043 0x1243]
Signed-off-by: Kailang Yang <kailang@realtek.com.tw>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Kailang Yang [Thu, 20 Sep 2007 10:50:29 +0000 (12:50 +0200)]
[ALSA] hda-codec - Fix ALC662 codec support
* Fixed ALC662 init verbs (wrong NIDs)
* Fixed ALC662 auto model issue (wrong DAC index)
Signed-off-by: Kailang Yang <kailang@realtek.com.tw>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Trent Piepho [Wed, 19 Sep 2007 19:20:17 +0000 (21:20 +0200)]
[ALSA] ad1848: simplify MCE down code
The polling loop to check for ACI to go down was more convoluted than it
needed to be. New loop should be more efficient and it is a lot simpler. The
old loop checked for a timeout before checking for ACI down, which could
result in an erroneous timeout. It's only a failure if the timeout expires
_and_ ACI is still high. There is nothing wrong with the timeout expiring
while the task is sleeping if ACI went low.
A polling loop to check for the device to leaving INIT mode is removed. The
device must have already left init for the previous ACI loop to have finished.
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Trent Piepho [Wed, 19 Sep 2007 19:19:57 +0000 (21:19 +0200)]
[ALSA] ad1848: Fix msleep while atomic
Simplest fix.
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Keita Maehara [Wed, 19 Sep 2007 12:29:37 +0000 (14:29 +0200)]
[ALSA] ac97: YMF743 missing controls support (2/2)
These patches enable a few YMF743 controls (Tone/3D/IEC958) that won't
be detected with the current version of ALSA.
The second one contains following changes:
- A chip-specific SPDIF support for YMF743 (It doesn't have AC97
standard SPDIF registers seen on YMF753).
- The implementation for 'IEC958 Playback Source' and 'IEC958 Mute'
are identical to the ones for YMF753. But there is no 'IEC958 Output
Pin' for YMF743.
Signed-off-by: Keita Maehara <maehara@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Keita Maehara [Wed, 19 Sep 2007 12:27:38 +0000 (14:27 +0200)]
[ALSA] ac97: YMF743 missing controls support (1/2)
These patches enable some YMF743 controls (Tone/3D/IEC958) that won't
be detected with the current version of ALSA.
The first one contains only cosmetic changes to share a few
YMF753-specific symbols with YMF743.
Signed-off-by: Keita Maehara <maehara@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Rene Herman [Tue, 18 Sep 2007 16:33:15 +0000 (18:33 +0200)]
[ALSA] schedule_timeout() fix for core/seq/seq_instr.c
Replace schedule_timeout() with schedule_timeout_uninterruptible()
to avoid signals in loop.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Rene Herman [Tue, 18 Sep 2007 16:10:49 +0000 (18:10 +0200)]
[ALSA] alsa-kernel: schedule_timeout() fixes
Fix schedule_timeout() use in alsa-kernel. Mostly just
schedule_timeout(1) --> schedule_timeout_uninterruptible(1)
The wavefront_synth one fixes the surrounding loop as well. In ymfpci_main,
delete a superfluous set_current_state() and in soc/soc-dapm.c replace an
_interruptible with _uninterruptible in some debug code; it's not waiting
for signals.
Signed-off-by: Rene Herman <rene.herman>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Matthew Ranostay [Mon, 17 Sep 2007 22:52:38 +0000 (00:52 +0200)]
[ALSA] hda: More subsystem id BIOS changes
More laptop BIOS changes the subsystem id for STAC9205 cards if the
microphone is toggled on/off in the settings.
The patch removes the old STAC_9205_M43xx and use STAC_9205_DELL_M43.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Mon, 17 Sep 2007 17:08:32 +0000 (19:08 +0200)]
[ALSA] Add description about power-saving mode
Added the description about power-saving mode on AC97 and HD-audio drivers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Mon, 17 Sep 2007 17:07:46 +0000 (19:07 +0200)]
[ALSA] Add default values for power-saving as Kconfig options
Added CONFIG_SND_AC97_POWER_SAVE_DEFAULT and CONFIG_SND_HDA_POWER_SAVE_DEFAULT
Kconfig options as the default values for power-saving mode of AC97 and
HD-audio drivers, respectively.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Krzysztof Helt [Mon, 17 Sep 2007 15:57:37 +0000 (17:57 +0200)]
[ALSA] sscape: support for audio part of VIVO cards
This patch adds support for audio part of the Ensoniq
SoundScape VIVO cards. The MIDI part is not supported.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Mon, 17 Sep 2007 14:44:06 +0000 (16:44 +0200)]
[ALSA] opti9xx: adjust OPL3 FM resource value
The OPTi ISA-PnP chips advertise their OPL4 base at 0x380 (to 0x3f0) through
pnp and put their on-chip OPL3 at +8. The driver assumes the provided
value is the ALBase (OPL3 address) though and checks for an OPL4 at -8,
which means that simply adding 8 to the pnp provides value works to fix
detection of both OPL3 and OPL4.
Problem spotted on 931 and 933 by Krzysztof Helt and confirmed on 924 and
925 (together all OPTi ISA-PnP chips) by me.
Signed-off-by; Rene Herman <rene.herman@gmail.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Mon, 17 Sep 2007 14:26:16 +0000 (16:26 +0200)]
[ALSA] Add descriptions for new module options of snd-sscape driver
Add descriptions for new module options of snd-sscape driver,
wss_port and dma2.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Krzysztof Helt [Mon, 17 Sep 2007 14:23:13 +0000 (16:23 +0200)]
[ALSA] sscape: driver extension to 2nd DMA and WSS port
This patch adds second DMA channel and WSS port settings
to the sscape driver. Also, it adds internal card type setting.
The Ensoniq SoundScape VIVO PnP id is added but not handled
yet.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Daniel Mack [Mon, 17 Sep 2007 12:45:14 +0000 (14:45 +0200)]
[ALSA] caiaq - support for Native Instrument's RigKontrol3
This patch adds support for Native Instrument's upcoming
RigKontrol3 sound interface.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Krzysztof Helt [Mon, 17 Sep 2007 12:43:14 +0000 (14:43 +0200)]
[ALSA] sc6000: 2 minor fixes
This patch zeroes buffer for the card name and
fixes incorrect jump in the probe function.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Krzysztof Helt [Mon, 17 Sep 2007 12:42:49 +0000 (14:42 +0200)]
[ALSA] sc6000: documentation fix
This patch fixes MPU-401 irq values list in documentation.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Matthias Kaehlcke [Mon, 17 Sep 2007 12:41:16 +0000 (14:41 +0200)]
[ALSA] Routines for effect processor FX8010: Use list_for_each_entry
Routines for effect processor FX8010: Use list_for_each_entry instead
of list_for_each
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Matthias Kaehlcke [Mon, 17 Sep 2007 12:40:04 +0000 (14:40 +0200)]
[ALSA] Intel HD Audio: Use list_for_each_entry(_safe)
Intel HD Audio: Use list_for_each_entry(_safe) instead of
list_for_each(_safe)
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Matthias Kaehlcke [Mon, 17 Sep 2007 12:39:05 +0000 (14:39 +0200)]
[ALSA] ESS Maestro 1/2/2E Sound Card: Use list_for_each_entry
ESS Maestro 1/2/2E Sound Card: Use list_for_each_entry instead of
list_for_each
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Krzysztof Helt [Mon, 17 Sep 2007 10:52:43 +0000 (12:52 +0200)]
[ALSA] ad1848_lib: waiting loops done after cs4231_lib
This patch fixes ad1848_lib waiting loops to be the same as in the cs4231_lib.
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Andrew Morton [Mon, 17 Sep 2007 10:50:38 +0000 (12:50 +0200)]
[ALSA] sc6000 build fix
sound/isa/sc6000.c: In function 'sc6000_dsp_reset':
sound/isa/sc6000.c:270: error: implicit declaration of function 'udelay' sound/isa/sc6000.c: In function 'sc6000_init_mss':
sound/isa/sc6000.c:327: error: implicit declaration of function 'msleep'
{standard input}: Assembler messages:
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Giuliano Pochini [Mon, 17 Sep 2007 10:49:40 +0000 (12:49 +0200)]
[ALSA] echoaudio - Add barrier() to prevent compiler optimization
This patch adds a barrier() to prevent the compiler from
moving the read outside of the loop. It also fixes a comment.
Signed-off-by: Giuliano Pochini <pochini@shiny.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Tobin Davis [Mon, 17 Sep 2007 10:46:12 +0000 (12:46 +0200)]
[ALSA] hda-codec: Add two new systems to ALC883
This patch adds support for the Asus M2A-VM HDMI and Abit IP35-PRO
motherboards.
Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Tobin Davis [Mon, 17 Sep 2007 10:45:11 +0000 (12:45 +0200)]
[ALSA] hda-codec: Add 4 channel support for Realtek ALC883
I had a request for a 4 channel mode. This should implement front
and surround outputs, leaving the 3rd plug for mic input.
Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Clemens Ladisch [Mon, 17 Sep 2007 07:41:36 +0000 (09:41 +0200)]
[ALSA] cmipci: fix distortion on rear channels
When playing multichannel data, the rear channels can get distorted if
the last sample of the last played stereo stream was not zero. To avoid
this, add a hack to play a few silence samples after the stream is
stopped.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Clemens Ladisch [Mon, 17 Sep 2007 07:40:57 +0000 (09:40 +0200)]
[ALSA] cmipci: clean up struct cmipci_pcm
Remove some unused field from the struct cmipci_pcm, and change the type
of some others to save some space.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Clemens Ladisch [Mon, 17 Sep 2007 07:40:24 +0000 (09:40 +0200)]
[ALSA] cmipci: fix lookup of double rates
When using one of the double sampling rates, use half the sample rate to
look up in the rates[] table, otherwise we stumble over the BUG().
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Clemens Ladisch [Mon, 17 Sep 2007 07:39:51 +0000 (09:39 +0200)]
[ALSA] cmipci: reorganize set_dac_channels()
By reorganizing the code that sets the CHB3DxC bits we can not only
simplify this code but also fix the bug where the CHB3D8C bit was not
reset when playing a stereo stream after a 7.1 stream.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Clemens Ladisch [Mon, 17 Sep 2007 07:39:10 +0000 (09:39 +0200)]
[ALSA] cmipci: remove 5.0 format
Disallow playback of five channels because the hardware does not support
it (or nobody knows how to do it).
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Clemens Ladisch [Mon, 17 Sep 2007 07:37:47 +0000 (09:37 +0200)]
[ALSA] cmipci: allow 96 kHz playback on non-multichannel rear
Move the code that enables 96 kHz out of the if() that checks for
availability of both DMA channels so that it is enabled even when
another stream is playing on the front channels.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Clemens Ladisch [Mon, 17 Sep 2007 07:37:19 +0000 (09:37 +0200)]
[ALSA] cmipci: initialize 0x90 registers
Initialize the registers at 0x90 and 0x91 with some undocumented values.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Clemens Ladisch [Mon, 17 Sep 2007 07:36:49 +0000 (09:36 +0200)]
[ALSA] cmipci: reset the chip when initializing
When the chip is initialized, reset it.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Clemens Ladisch [Mon, 17 Sep 2007 07:36:16 +0000 (09:36 +0200)]
[ALSA] cmipci: show more registers in proc file
Show a dump of all registers in the 0x00-0x27 and 0x90-0x93 ranges in
the 'cmipci' proc file.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Clemens Ladisch [Mon, 17 Sep 2007 07:35:46 +0000 (09:35 +0200)]
[ALSA] cmipci: update register definitions
Update comments for many register symbols, add some new register
symbols, and rename a few ones.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Clemens Ladisch [Mon, 17 Sep 2007 07:34:59 +0000 (09:34 +0200)]
[ALSA] cmipci: fix version 37 detection
Use the proper value for the bit that identifies chip version 37.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Clemens Ladisch [Mon, 17 Sep 2007 07:33:37 +0000 (09:33 +0200)]
[ALSA] bt87x: fix detection of generic boards
Add an 'unknown' board type so that it is possible to differentiate
between unknown and generic boards.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Clemens Ladisch [Mon, 17 Sep 2007 07:33:17 +0000 (09:33 +0200)]
[ALSA] usb-audio: add Ozone Academic support
Add a quirk to detect the MIDI port on the M-Audio Ozone Academic.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Jaroslav Kysela [Wed, 12 Sep 2007 11:29:51 +0000 (13:29 +0200)]
[ALSA] SC6000 driver - add HAS_IOPORT dependency
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Tue, 11 Sep 2007 20:11:08 +0000 (22:11 +0200)]
[ALSA] echoaudio - Remove superfluous volatile prefix
Remove superfluous volatile prefix in the communication struct definition.
This eventually fixes the compile warnings with the recent gcc, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Tue, 11 Sep 2007 20:10:14 +0000 (22:10 +0200)]
[ALSA] Add description of sc6000 driver
Added the description of the new sc6000 driver to ALSA-Configuration.txt.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Krzysztof Helt [Tue, 11 Sep 2007 19:53:05 +0000 (21:53 +0200)]
[ALSA] Gallant SC-6000 driver
This is port of the Gallant SC-6000 driver from the OSS aedsp16 driver.
This card was also sold as AudioExcel DSP 16 and Zoltrix AV302 (Audio
Plus True 16).
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Danny Tholen [Tue, 11 Sep 2007 19:41:56 +0000 (21:41 +0200)]
[ALSA] hda-intel - Improve HD-audio codec probing robustness
When modem is disabled in the BIOS, detection of the number of codecs
always fails after booting if STATESTS is not cleared first.
This patch fixes this problem and also adds an error check in a place
where a read error would lead to a very large number of pointless loops.
Signed-off-by: Danny Tholen <obiwan@mailmij.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Tue, 11 Sep 2007 19:28:50 +0000 (21:28 +0200)]
[ALSA] pcxhr - Fix trigger start with non-linked streams
The non-linked streams couldn't be started properly due to missing
setting of stream->status.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Timur Tabi [Mon, 10 Sep 2007 22:45:50 +0000 (00:45 +0200)]
[ALSA] Fix CS4270 volume control and optimize I2C operations
The volume control for the CS4270 ASoC driver was inverted - raising the
volume level with alsamixer would decrease the actual volume.
This patch also improves the performance of the I2C code (used to change
register settings) by only performing an I2C write if the new value is
different from the value that's in the register cache.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Krzysztof Helt [Mon, 10 Sep 2007 22:40:42 +0000 (00:40 +0200)]
[ALSA] cs4231-lib: improved waiting after mce_down
This patch replaces long msleeps in waiting loops
with schedule_timeout() calls.
Signed-off-by: Krzysztof Helt <krzysztof.h1 at wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Mon, 10 Sep 2007 22:35:06 +0000 (00:35 +0200)]
[ALSA] Kill useless volatile in pcm.h
The volatile prefix is just useless there. Let's kill them, and then
gcc will be happier, too.
sound/acore/pcm.c:867: warning: passing argument 1 of ‘__constant_c_and_count_memset’ discards qualifiers from pointer target type
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Mon, 10 Sep 2007 22:33:48 +0000 (00:33 +0200)]
[ALSA] Fix 'discards qualifiers' compile warnings in pcm.h
Fixed cast messes in pcm.h.
include/sound/pcm.h: In function ‘hw_param_interval_c’:
include/sound/pcm.h:800: warning: passing argument 1 of ‘hw_param_interval’ discards qualifiers from pointer target type
Simply redefine the inline functions again for const pointers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Rene Herman [Mon, 10 Sep 2007 21:22:55 +0000 (23:22 +0200)]
[ALSA] ad1848/cs4231: replace commented out debug code with snd-printd{,d}
While I'm at it another 'while I'm there' -- replace commented out debug
code with snd-printd{,d}.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Rene Herman [Mon, 10 Sep 2007 21:20:34 +0000 (23:20 +0200)]
[ALSA] ad1848: replace HZ calculus with msecs_to_jiffies()
If I'm not mistaken, any (new) use of HZ these days is considered a bug so
while I'm there...
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Rene Herman [Mon, 10 Sep 2007 21:19:55 +0000 (23:19 +0200)]
[ALSA] ad1838/cs4231 - fix MCE timeout upon initial load
When the ad1848/cs2431 is first being initialized, auto-calibration may not
be set causing a timeout waiting for it in snd_ad1848/cs4231_mce_down().
This has no dire consequences other than an alarming printk, but since what
we need to wait for is for the calibration to _finish_, let's just check for
that instead.
The early chips need a slight delay (as commented -- 5 sample periods) to be
sure that _if_ calibration is going to happen, it has started when we check
While the CS4231A datasheet implies it'll happen immediately on downing MCE,
some testing is showing that there's a window there as well, so just do the
delay everywhere.
Thanks to Krysztof Helt for pinpointing this problem.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Adrian Bunk [Mon, 10 Sep 2007 21:15:50 +0000 (23:15 +0200)]
[ALSA] au88x0_synth.c bugfix
This patch fixes the code in vortex_wt_SetFrequency() to what seems to
have been intended.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Rene Herman [Mon, 10 Sep 2007 21:13:26 +0000 (23:13 +0200)]
[ALSA] ad1848: fix AD1848P macro
Consistent variable naming is a good thing, but let's be a little less
sneaky about enforcing it... ;-/
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Matthew Ranostay [Mon, 10 Sep 2007 21:09:42 +0000 (23:09 +0200)]
[ALSA] hda: BIOS changing subsystem id
Some laptop BIOS change the subsystem id for STAC9205 cards if the
microphone isn't toggled on/off in the settings.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Adrian Bunk [Mon, 10 Sep 2007 21:08:34 +0000 (23:08 +0200)]
[ALSA] unexport snd_ctl_elem_{read,write}
snd_ctl_elem_{read,write} no longer have any modular users
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Krzysztof Helt [Mon, 10 Sep 2007 21:06:55 +0000 (23:06 +0200)]
[ALSA] sun-cs4231: checkpatch fixes
This patch fixes white spaces and issues pointed by
the checkpatch.pl script.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Clemens Ladisch [Mon, 10 Sep 2007 06:05:19 +0000 (08:05 +0200)]
[ALSA] document basic TLV stuff
Add documentation about how to define dB scale information for mixer
controls.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Trent Piepho [Fri, 7 Sep 2007 11:18:50 +0000 (13:18 +0200)]
[ALSA] snd-bt87x: Power down audio ADC when not in use
Sets a bit to power down the Bt87x's internal audio ADC when the ALSA device
isn't open, or when it is in 'digital mode' using an external ADC.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Clemens Ladisch [Fri, 7 Sep 2007 08:44:13 +0000 (10:44 +0200)]
[ALSA] cmipci: add msbits constraint for 24-bit format
Add a msbits constraint to the SPDIF output device to indicate that
S32_LE samples use only 24 bits for data.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Fri, 7 Sep 2007 08:58:58 +0000 (10:58 +0200)]
[ALSA] hda-codec - Add support for Toshiba A305
Added the proper model=toshiba for Toshiba A305 with ALC268 codec.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Fri, 7 Sep 2007 08:57:44 +0000 (10:57 +0200)]
[ALSA] hda-codec - Add missing Mic Boost for some ALC882 models
Mic Boost mixer volume was missing in some ALC882 models. Added now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Trent Piepho [Thu, 6 Sep 2007 13:06:44 +0000 (15:06 +0200)]
[ALSA] snd-bt87x: Improve support for different board types
Different cards have different audio configurations, but the driver didn't
support this. The only setting it had was the digital rate.
This patch adds a board configuration list. Currently, configurable items are
the digital rate and the digital data format (for cards with an external ADC),
a flag for the absence of an external ADC, and a flag for no connection to the
Bt87x internal ADC.
This allows cards that don't use the internal ADC to omit the ALSA 'Bt87x
analog' device and related controls. Cards without an external ADC can omit
the 'Bt87x digital' device.
In order to support the CS5331A ADC used on the Osprey 440 and 2x0 cards, the
digital format needs to be different than the default.
Support could be added for defining:
The connections or lack of them to the Bt87x's internal ADC mux
Multiple sample rates for an external ADC (e.g. Osprey)
Control of an external mux for an external ADC (e.g. Osprey)
The card definitions for cards other than the Ospreys are kept equivalent to
their old values. This is likely inaccurate for most cards, as it is doubtful
that both an external and the internal ADC would be used. Lacking information
on those cards, the behavior is left unchanged.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Krzysztof Helt [Thu, 6 Sep 2007 13:03:59 +0000 (15:03 +0200)]
[ALSA] cs4231-lib: replace common delay loop by function
This patch replaces a common delay loop by a function.
It also uses ARRAY_SIZE macro for the rates table.
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Krzysztof Helt [Thu, 6 Sep 2007 13:03:22 +0000 (15:03 +0200)]
[ALSA] ad1848_lib: replace common delay loop by function
This patch replaces a common delay loop by a function.
It also uses ARRAY_SIZE macro for the rates table.
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Krzysztof Helt [Thu, 6 Sep 2007 13:02:33 +0000 (15:02 +0200)]
[ALSA] dbri - Use linux/of.h instead of asm/prom.h
The linux/of.h header should be used instead of asm/prom.h.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Thu, 6 Sep 2007 13:00:27 +0000 (15:00 +0200)]
[ALSA] hda-codec - Add quirk entry for Casper CPR2000
Added the quirk entry for Casper CPR2000 (model=acer) with ALC268 codec
(ALSA bug#3343).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Thu, 6 Sep 2007 12:54:11 +0000 (14:54 +0200)]
[ALSA] hda-codec - Add missing model names for ALC882 codecs
Added the missing model option strings for ALC882 codecs.
Also added the corresponding description in ALSA-Configuration.txt.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Thu, 6 Sep 2007 12:52:04 +0000 (14:52 +0200)]
[ALSA] hda-codec - Add support for ASUS A7M
Added the support for ASUS A7M with ALC882 codec.
It's slightly different from ASUS A7J.
The patch taken from ALSA bug#3000
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3000
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Thu, 6 Sep 2007 12:29:53 +0000 (14:29 +0200)]
[ALSA] hda-codec - Add laptop-automute model for
AD1986A
Added a new model laptop-automute for
AD1986A, which has the HP jack
detection and auto-muting of the speaker. Currently, it's used for
Lenovo N100.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Wed, 5 Sep 2007 21:48:45 +0000 (23:48 +0200)]
[ALSA] Add missing models for Dell with STAC9200 codec
Added the missing description of models for Dell machines with
STAC9200 HD-audio codec chip.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Wed, 5 Sep 2007 21:46:03 +0000 (23:46 +0200)]
[ALSA] hda-codec - Fix wrong pin config order in STAC92xx dell models
The last patch to change/add Dell models have wrong pin config orders.
This patch fixes the pin positions.
Taken from ALSA bug#3319,
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3319
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Wed, 5 Sep 2007 17:14:38 +0000 (19:14 +0200)]
[ALSA] hda-codec - Add support for Acer Aspire 9303
Add the entry for Acer Aspire 9303 (model=acer-aspire) with ALC883 codec.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Krzysztof Helt [Wed, 5 Sep 2007 13:07:57 +0000 (15:07 +0200)]
[ALSA] sun-cs4231: memory management fix
The chip structure is now allocated by snd_card_new()
and it must not be released by separate kfree().
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Krzysztof Helt [Wed, 5 Sep 2007 13:05:08 +0000 (15:05 +0200)]
[ALSA] dbri: conversion to OpenFirmware framework
This patch converts the dbri driver to use OF framework.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Krzysztof Helt [Tue, 4 Sep 2007 11:24:14 +0000 (13:24 +0200)]
[ALSA] cs4231 header split
This patch splits the cs4231.h file into two parts:
- cs4231-regs.h which contain register constants and macros
- cs4231.h which includes the above and contain rest of the definitions
This will allow to share register definitions between x86 ISA cs4231
and SPARC cs4231.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Krzysztof Helt [Tue, 4 Sep 2007 11:09:20 +0000 (13:09 +0200)]
[ALSA] dbri: more cleanups
This patch:
- removes redundant constant suffices
- removes redundant parentheses
- removes redundant curly brackets
- removes check if a spinlock is locked inside method which is
only called with the spinlock locked
- moves few functions to the __init section
- removes line which appears twice after the previous patch
- minor comments improvements
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Krzysztof Helt [Tue, 4 Sep 2007 11:08:24 +0000 (13:08 +0200)]
[ALSA] sun-cs4231: code improvements
This patch does some code improvements to make
driver (both code and binary) shorter.
It also make use of card->private_data pointer to
store chip information.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Andres Salomon [Mon, 3 Sep 2007 13:43:43 +0000 (15:43 +0200)]
[ALSA] cs5535audio: drop unused bus master stuff
We really only care about the first two bus masters (playback and capture).
There's no need to have unused BM code lying around, so let's get rid of it.
If for some reason we trigger an IRQ for some BM that we're not using.. well,
that warrants spitting out an error message (imo).
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Andres Salomon [Mon, 3 Sep 2007 13:43:18 +0000 (15:43 +0200)]
[ALSA] cs5535audio: fix ACC_BM[x]_CMD register handling
According to 6.3.2.7 of the cs5535/cs5536 data sheets, the ACC_BM[x]_CMD
registers are only 8 bits wide. This driver treats them as 32 bits wide,
and also has bits in the wrong place. Simple fix to the definitions.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Andres Salomon [Mon, 3 Sep 2007 13:42:52 +0000 (15:42 +0200)]
[ALSA] cs5535audio: update PCI device handling in suspend/resume
Save the PCI state before disabling the device, and add some error checking.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Andres Salomon [Mon, 3 Sep 2007 13:42:16 +0000 (15:42 +0200)]
[ALSA] cs5535audio: fix PRD register save/restore power management race
In the suspend path, we currently save the PRD registers and then disable DMA.
This is racy; the sound hardware might update the PRD register as it finishes
processing some DMA pages between when we've saved the PRD registers and
when DMA actually gets disabled. Furthermore, we actively check whether or
not DMA is enabled before saving PRD registers; there's no reason to do that,
as the PRD registers should not update when we twiddle the ACC_BM[x]_CMD
register(s). Worst case, we save the PRD registers twice; even powering
down the ACC shouldn't mess with the PRD registers (according to the 5536
data sheet, section 5.3.7.4, power-down procedure). This patch reworks
all that to first disable DMA, and then save PRD registers.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Andres Salomon [Mon, 3 Sep 2007 13:41:47 +0000 (15:41 +0200)]
[ALSA] cs5535audio: correctly set dma->substream
We're never actually setting dma->substream to the current substream; that
means the dma->substream checks that we do in the suspend/resume path
are never satisfied, and the PRD registers are never correctly managed. This
changes it so that we set the substream when constructing the specific
bus master DMA, and unsetting it when we tear down the BM's DMA.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Maxim Levitsky [Mon, 3 Sep 2007 13:31:02 +0000 (15:31 +0200)]
[ALSA] hda-codec - Fix support for sigmatel codecs that have 2 or more ADCs
1) Create seperate mixer controls for each ADC
2) Make number of substreams of capture PCM device be equal to
number of ADCs
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Maxim Levitsky [Mon, 3 Sep 2007 13:30:26 +0000 (15:30 +0200)]
[ALSA] hda-codec - make volume knob, the master volume for sigmatel codecs
VolumeKnob is present on most sigmatel codecs, it allows to decrease
volume of all DACs at once, it is a kind of post-procesing volume.
Note that all output amps of sigmatel only decrease volume, and all
input amps only increase volume.
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Maxim Levitsky [Mon, 3 Sep 2007 13:29:37 +0000 (15:29 +0200)]
[ALSA] hda-codec - add support for analog loopback to STAC9204/9205/922x/927x
The analog loopback routes the sound just before it enters ADC0
to output of DAC0.
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Maxim Levitsky [Mon, 3 Sep 2007 13:29:04 +0000 (15:29 +0200)]
[ALSA] hda-codec - add support for swapping center/LFE channels to STAC codecs
Center/LFE channels are located on same jack, so it can be usefull
to swap them.
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>