OSDN Git Service
Aurelien Jarno [Wed, 31 May 2017 22:01:09 +0000 (00:01 +0200)]
target/s390x: implement MOVE INVERSE
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <
20170531220129.27724-11-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Aurelien Jarno [Wed, 31 May 2017 22:01:08 +0000 (00:01 +0200)]
target/s390x: implement COMPARE AND SIGNAL
These functions differ from COMPARE by generating an exception for a
QNaN input. Use the non quiet version of floatXX_compare.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <
20170531220129.27724-10-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Aurelien Jarno [Wed, 31 May 2017 22:01:05 +0000 (00:01 +0200)]
target/s390x: implement PACK
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <
20170531220129.27724-7-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Aurelien Jarno [Wed, 31 May 2017 22:01:04 +0000 (00:01 +0200)]
target/s390x: implement TEST ADDRESSING MODE
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <
20170531220129.27724-6-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Aurelien Jarno [Wed, 31 May 2017 22:01:03 +0000 (00:01 +0200)]
target/s390x: implement TEST AND SET
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <
20170531220129.27724-5-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Aurelien Jarno [Wed, 31 May 2017 22:01:02 +0000 (00:01 +0200)]
target/s390x: implement local-TLB-clearing in IPTE
And at the same time make IPTE SMP aware.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <
20170531220129.27724-4-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Aurelien Jarno [Wed, 31 May 2017 22:01:01 +0000 (00:01 +0200)]
target/s390x: remove some Linux assumptions from IPTE
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <
20170531220129.27724-3-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Aurelien Jarno [Wed, 31 May 2017 22:01:00 +0000 (00:01 +0200)]
target/s390x: remove dead code in translate.c
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <
20170531220129.27724-2-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Thomas Huth [Thu, 25 May 2017 09:22:12 +0000 (11:22 +0200)]
target/s390x/cpu_models: Allow some additional feature bits for the "qemu" CPU
Currently we only present the plain z900 feature bits to the guest,
but QEMU already emulates some additional features (but not all of
the next CPU generation, so we can not use the next CPU level as
default yet). Since newer Linux kernels are checking the feature bits
and refuse to work if a required feature is missing, it would be nice
to have a way to present more of the supported features when we are
running with the "qemu" CPU.
This patch now adds the supported features to the "full_feat" bitmap,
so that additional features can be enabled on the command line now,
for example with:
qemu-system-s390x -cpu qemu,stfle=true,ldisp=true,eimm=true,stckf=true
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
1495704132-5675-1-git-send-email-thuth@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 24 May 2017 21:34:10 +0000 (14:34 -0700)]
target/s390x: Re-implement a few EXECUTE target insns directly
While the previous patch is required for proper conformance,
the vast majority of target insns are MVC and XC for implementing
memmove and memset respectively. The next most common are CLC,
TR, and SVC.
Implementing these (and a few others for which we already have
an implementation) directly is faster than going through full
translation to a TB.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Sun, 21 May 2017 16:50:00 +0000 (09:50 -0700)]
target/s390x: Implement EXECUTE via new TranslationBlock
Previously, helper_ex would construct the insn and then implement
the insn via direct calls other helpers. This was sufficient to
boot Linux but that is all.
It is easy enough to go the whole nine yards by stashing state for
EXECUTE within the cpu, and then rely on a new TB to be created
that properly and completely interprets the insn.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 24 May 2017 20:00:16 +0000 (13:00 -0700)]
target/s390x: End the TB after EXECUTE
This split will be required for implementing EXECUTE properly.
Do this now as a separate step to aid comparison of before and
after TB listings.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 24 May 2017 19:27:36 +0000 (12:27 -0700)]
target/s390x: Save current ilen during translation
Use this saved value instead of recomputing from next_pc difference.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Tue, 23 May 2017 01:58:42 +0000 (18:58 -0700)]
target/s390x: Implement CSPG
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Tue, 23 May 2017 01:34:42 +0000 (18:34 -0700)]
target/s390x: Use atomic operations for COMPARE SWAP PURGE
Also provide the cross-cpu tlb flushing required by the PoO.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 24 May 2017 18:56:15 +0000 (11:56 -0700)]
target/s390x: Fix EXECUTE with R1==0
The PoO specifies that when R1==0, no ORing into the insn
loaded from storage takes place. Load a zero for this case.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 24 May 2017 18:49:53 +0000 (11:49 -0700)]
target/s390x: Fix some helper_ex problems
(1) The OR of the low bits or R1 into INSN were not being done
consistently; it was forgotten along all but the SVC path.
(2) The setting of ILEN was wrong on SVC path for EXRL.
(3) The data load for ICM read too much.
Fix these by consolidating data load at the beginning, using
get_ilen to control the number of bytes loaded, and ORing in
the byte from R1. Use extract64 from the full aligned insn
to extract arguments.
Pass in ILEN rather than RET as the more natural way to give
the required data along the SVC path.
Modify ENV->CC_OP directly rather than include it in the
functional interface.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Tue, 23 May 2017 02:45:43 +0000 (19:45 -0700)]
target/s390x: Use unwind data for helper_mvcs/mvcp
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Mon, 22 May 2017 20:59:02 +0000 (13:59 -0700)]
target/s390x: Use unwind data for helper_lra
Fix saving exception_index around mmu_translate; eliminate a dead store.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Mon, 22 May 2017 19:54:35 +0000 (12:54 -0700)]
target/s390x: Use unwind data for helper_tprot
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Mon, 22 May 2017 19:53:32 +0000 (12:53 -0700)]
target/s390x: Use unwind data for helper_testblock
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Mon, 22 May 2017 19:43:23 +0000 (12:43 -0700)]
target/s390x: Use unwind data for helper_stctl
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Mon, 22 May 2017 19:18:42 +0000 (12:18 -0700)]
target/s390x: Use unwind data for helper_lctl
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Mon, 22 May 2017 19:14:58 +0000 (12:14 -0700)]
target/s390x: Use unwind data for helper_lctlg
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Mon, 22 May 2017 18:59:43 +0000 (11:59 -0700)]
target/s390x: Use unwind data for helper_trt
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 18:46:25 +0000 (11:46 -0700)]
target/s390x: Use unwind data for helper_tre
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 18:43:08 +0000 (11:43 -0700)]
target/s390x: Use unwind data for helper_tr
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 18:37:55 +0000 (11:37 -0700)]
target/s390x: Use unwind data for helper_unpk
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 18:34:43 +0000 (11:34 -0700)]
target/s390x: Use unwind data for helper_cksm
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 18:30:39 +0000 (11:30 -0700)]
target/s390x: Use unwind data for helper_clcle
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 18:28:30 +0000 (11:28 -0700)]
target/s390x: Use unwind data for helper_mvcle
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 18:26:27 +0000 (11:26 -0700)]
target/s390x: Use unwind data for helper_mvcl
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 18:23:15 +0000 (11:23 -0700)]
target/s390x: Use unwind data for helper_stam
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 18:20:48 +0000 (11:20 -0700)]
target/s390x: Use unwind data for helper_lam
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 18:17:50 +0000 (11:17 -0700)]
target/s390x: Use unwind data for helper_mvst
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 18:15:25 +0000 (11:15 -0700)]
target/s390x: Use unwind data for helper_mvpg
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 17:16:24 +0000 (10:16 -0700)]
target/s390x: Use unwind data for helper_clst
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 17:13:22 +0000 (10:13 -0700)]
target/s390x: Use unwind data for helper_srst
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 17:10:58 +0000 (10:10 -0700)]
target/s390x: Use unwind data for helper_clm
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 17:06:23 +0000 (10:06 -0700)]
target/s390x: Use unwind data for helper_clc
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 16:59:53 +0000 (09:59 -0700)]
target/s390x: Use unwind data for helper_mvc
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 16:53:31 +0000 (09:53 -0700)]
target/s390x: Use unwind data for helper_xc
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 16:42:18 +0000 (09:42 -0700)]
target/s390x: Use unwind data for helper_oc
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 16:41:29 +0000 (09:41 -0700)]
target/s390x: Use unwind data for helper_nc
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 19 May 2017 18:39:39 +0000 (11:39 -0700)]
target/s390x: Move helper_ex to end of file
This will avoid needing forward declarations in following patches.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Thu, 18 May 2017 19:10:53 +0000 (12:10 -0700)]
target/s390x: Use cpu_loop_exit_restore for tlb_fill
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Thomas Huth [Thu, 18 May 2017 17:26:40 +0000 (19:26 +0200)]
target/s390x: Add support for the TEST BLOCK instruction
TEST BLOCK was likely once used to execute basic memory
tests, but nowadays it's just a (slow) way to clear a page.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
1495128400-23759-1-git-send-email-thuth@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Peter Maydell [Tue, 6 Jun 2017 16:00:12 +0000 (17:00 +0100)]
Merge remote-tracking branch 'remotes/xtensa/tags/
20170606-xtensa' into staging
target/xtensa fixes:
- fix read/write simcall mapping flags and return value;
- use -serial option to direct console output of sim machine to QEMU chardev;
- fix handling of unknown registers in the gdbstub.
# gpg: Signature made Tue 06 Jun 2017 11:46:05 BST
# gpg: using RSA key 0x51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <filippov@cadence.com>"
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044
* remotes/xtensa/tags/
20170606-xtensa:
target/xtensa: handle unknown registers in gdbstub
target/xtensa: support output to chardev console
target/xtensa: fix return value of read/write simcalls
target/xtensa: fix mapping direction in read/write simcalls
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 6 Jun 2017 14:37:53 +0000 (15:37 +0100)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2017-06-06' into staging
Miscellaneous patches for 2017-06-06
# gpg: Signature made Tue 06 Jun 2017 08:30:43 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-misc-2017-06-06:
monitor: fix object_del for command-line-created objects
tests: check-qom-proplist: add checks for cmdline-created objects
virtio-scsi-test: Use scsi-hd instead of legacy scsi-disk
block: Clarify documentation of BlockInfo member io-status
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 6 Jun 2017 13:30:06 +0000 (14:30 +0100)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-
20170606' into staging
ppc patch queue 2017-06-06
Accumulated patches for ppc targets and the pseries machine type.
The big thing in this batch is a start on a substantial cleanup of the
pseries hotplug mechanisms, which were pretty confusing. For now
these shouldn't cause substantial behavioural changes, but I am hoping
these lead to clearer code and eventually to fixes for the bugs we
have in hotplug handling, particularly when hotplug and migration are
combined.
The remaining patches are mostly bugfixes.
# gpg: Signature made Tue 06 Jun 2017 03:48:50 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.10-
20170606:
spapr: Remove some non-useful properties on DRC objects
spapr: Eliminate spapr_drc_get_type_str()
spapr: Move configure-connector state into DRC
spapr: Clean up spapr_dr_connector_by_*()
spapr: Introduce DRC subclasses
spapr/drc: don't migrate DRC of cold-plugged CPUs and LMBs
spapr: Allow boot from vhost-*-scsi backends
ppc/pnv: check the return value of fdt_setprop()
spapr_nvram: Check return value from blk_getlength()
target/ppc: Fixup set_spr error in h_register_process_table
target-ppc: Fix openpic timer read register offset
spapr: Make DRC get_index and get_type methods into plain functions
spapr: Abolish DRC set_configured method
spapr: Abolish DRC get_fdt method
spapr: Move DRC RTAS calls into spapr_drc.c
migration: Mark CPU states dirty before incoming migration/loadvm
migration: remove register_savevm()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Max Filippov [Sat, 3 Jun 2017 09:11:13 +0000 (02:11 -0700)]
target/xtensa: handle unknown registers in gdbstub
Xtensa cores may have registers of types/sizes not supported by the
gdbstub accessors. Ignore writes to such registers and return zero on
read, but always return correct register size, so that gdb on the other
side is able to access all registers in the packet holding unsupported
registers in the middle. This fixes gdb interaction with cores that have
vector/custom TIE registers.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Max Filippov [Fri, 12 May 2017 18:09:14 +0000 (11:09 -0700)]
target/xtensa: support output to chardev console
In semihosting mode QEMU allows guest to read and write host file
descriptors directly, including descriptors 0..2, a.k.a. stdin, stdout
and stderr. Sometimes it's desirable to have semihosting console
controlled by -serial option, e.g. to connect it to network.
Add semihosting console to xtensa-semi.c, open it in the 'sim' machine
in the presence of -serial option and direct stdout and stderr to it
when it's present.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Max Filippov [Fri, 12 May 2017 19:05:23 +0000 (12:05 -0700)]
target/xtensa: fix return value of read/write simcalls
Return value of read/write simcalls is not calculated correctly in case
of operations crossing page boundary and in case of short reads/writes.
Read and write simcalls should return the size of data actually
read/written or -1 in case of error.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Max Filippov [Fri, 12 May 2017 18:17:01 +0000 (11:17 -0700)]
target/xtensa: fix mapping direction in read/write simcalls
Read and write simcalls map physical memory to access I/O buffers, but
'read' simcall need to map it for writing and 'write' simcall need to
map it for reading, i.e. the opposite of what they do now. Fix that.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Peter Maydell [Tue, 6 Jun 2017 09:00:34 +0000 (10:00 +0100)]
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue, 2017-06-05
# gpg: Signature made Mon 05 Jun 2017 19:58:01 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-and-machine-pull-request:
scripts: Test script to look for -device crashes
qemu.py: Add QEMUMachine.exitcode() method
qemu.py: Don't set _popen=None on error/shutdown
spapr: cleanup spapr_fixup_cpu_numa_dt() usage
numa: move numa_node from CPUState into target specific classes
numa: make hmp 'info numa' fetch numa nodes from qmp_query_cpus() result
numa: make sure that all cpus have has_node_id set if numa is enabled
numa: move default mapping init to machine
numa: consolidate cpu_preplug fixups/checks for pc/arm/spapr
pc: Use "min-[x]level" on compat_props
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Michael Roth [Sat, 3 Jun 2017 23:13:32 +0000 (18:13 -0500)]
monitor: fix object_del for command-line-created objects
Currently objects specified on the command-line are only partially
cleaned up when 'object_del' is issued in either HMP or QMP: the
object itself is fully finalized, but the QemuOpts are not removed.
This results in the following behavior:
x86_64-softmmu/qemu-system-x86_64 -monitor stdio \
-object memory-backend-ram,id=ram1,size=256M
QEMU 2.7.91 monitor - type 'help' for more information
(qemu) object_del ram1
(qemu) object_del ram1
object 'ram1' not found
(qemu) object_add memory-backend-ram,id=ram1,size=256M
Duplicate ID 'ram1' for object
Try "help object_add" for more information
which can be an issue for use-cases like memory hotplug.
This happens on the HMP side because hmp_object_add() attempts to
create a temporary QemuOpts entry with ID 'ram1', which ends up
conflicting with the command-line-created entry, since it was never
cleaned up during the previous hmp_object_del() call.
We address this by adding a check in user_creatable_del(), which
is called by both qmp_object_del() and hmp_object_del() to handle
the actual object cleanup, to determine whether an option group entry
matching the object's ID is present and removing it if it is.
Note that qmp_object_add() never attempts to create a temporary
QemuOpts entry, so it does not encounter the duplicate ID error,
which is why this isn't generally visible in libvirt.
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Daniel Berrange <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
1496531612-22166-3-git-send-email-mdroth@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Michael Roth [Sat, 3 Jun 2017 23:13:31 +0000 (18:13 -0500)]
tests: check-qom-proplist: add checks for cmdline-created objects
check-qom-proplist originally added tests for verifying that
object-creation helpers object_new_with_{props,propv} behaved in
similar fashion to the "traditional" method involving setting each
individual property separately after object creation rather than
via a single call.
Another similar "helper" for creating Objects exists in the form of
objects specified via -object command-line parameters. By that
rationale, we extend check-qom-proplist to include similar checks
for command-line-created objects by employing the same
qemu_opts_parse()-based parsing the vl.c employs.
This parser has a side-effect of parsing the object's options into
a QemuOpt structure and registering this in the global QemuOptsList
using the Object's ID. This can conflict with future Object instances
that attempt to use the same ID if we don't ensure this is cleaned
up as part of Object finalization, so we include a FIXME stub to test
for this case, which will then be resolved in a subsequent patch.
Suggested-by: Daniel Berrange <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Daniel Berrange <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
1496531612-22166-2-git-send-email-mdroth@linux.vnet.ibm.com>
[Comment formatting tidied up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Markus Armbruster [Tue, 9 May 2017 10:56:02 +0000 (12:56 +0200)]
virtio-scsi-test: Use scsi-hd instead of legacy scsi-disk
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
1494327362-30727-3-git-send-email-armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Markus Armbruster [Tue, 9 May 2017 10:56:01 +0000 (12:56 +0200)]
block: Clarify documentation of BlockInfo member io-status
Say "SCSI except scsi-generic" instead of "scsi-disk", because
scsi-disk could mean either scsi-disk.c (which is correct) or device
model scsi-disk (which would be incorrect).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
1494327362-30727-2-git-send-email-armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
David Gibson [Sun, 4 Jun 2017 10:28:04 +0000 (20:28 +1000)]
spapr: Remove some non-useful properties on DRC objects
* 'connector_type' is easily derived from the 'index' property, so there's
no point to it (it's also implicit in the QOM type of the DRC)
* 'isolation-state', 'indicator-state' and 'allocation-state' are
part of the transaction between qemu and guest during PAPR hotplug
operations, and outside tools really have no business looking at it
(especially not changing, and these were RW properties)
* 'entity-sense' is basically just a weird PAPR encoding of whether there
is a device connected to this DRC
Strictly speaking removing these properties is breaking the qemu interface.
However, I'm pretty sure no management tools have ever used these. For
debugging there are better alternatives. Therefore, I think removing these
broken interfaces is the better option.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
David Gibson [Sun, 4 Jun 2017 10:26:54 +0000 (20:26 +1000)]
spapr: Eliminate spapr_drc_get_type_str()
This function was used in generating the device tree. However, now that
we have different QOM types for different DRC types we can easily store
the information we need in the class structure and avoid this specialized
lookup function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
David Gibson [Sun, 4 Jun 2017 10:26:25 +0000 (20:26 +1000)]
spapr: Move configure-connector state into DRC
Currently the sPAPRMachineState contains a list of sPAPRConfigureConnector
structures which store intermediate state for the ibm,configure-connector
RTAS call.
This was an attempt to separate this state from the core of the DRC state.
However the configure connector process is intimately tied to the DRC
model, so there's really no point trying to have two levels of interface
here.
Moving the configure-connector state into its corresponding DRC allows
removal of a number of helpers for maintaining the anciliary list.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
David Gibson [Sun, 4 Jun 2017 10:26:03 +0000 (20:26 +1000)]
spapr: Clean up spapr_dr_connector_by_*()
* Change names to something less ludicrously verbose
* Now that we have QOM subclasses for the different DRC types, use a QOM
typename instead of a PAPR type value parameter
The latter allows removal of the get_type_shift() helper.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
David Gibson [Sun, 4 Jun 2017 10:25:17 +0000 (20:25 +1000)]
spapr: Introduce DRC subclasses
Currently we only have a single QOM type for all DRCs, but lots of
places where we switch behaviour based on the DRC's PAPR defined type.
This is a poor use of our existing type system.
So, instead create QOM subclasses for each PAPR defined DRC type. We
also introduce intermediate subclasses for physical and logical DRCs,
a division which will be useful later on.
Instead of being stored in the DRC object itself, the PAPR type is now
stored in the class structure. There are still many places where we
switch directly on the PAPR type value, but this at least provides the
basis to start to remove those.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Greg Kurz [Fri, 2 Jun 2017 10:09:35 +0000 (12:09 +0200)]
spapr/drc: don't migrate DRC of cold-plugged CPUs and LMBs
As explained in commit
5c0139a8c2f0 ("spapr: fix default DRC state for
coldplugged LMBs"), guests expect cold-plugged LMBs to be pre-allocated
and unisolated. The same goes for cold-plugged CPUs.
While here, let's convert g_assert(false) to the better self documenting
g_assert_not_reached().
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Felipe Franciosi [Mon, 5 Jun 2017 15:55:18 +0000 (16:55 +0100)]
spapr: Allow boot from vhost-*-scsi backends
The current implementation of spapr_get_fw_dev_path() doesn't take into
consideration vhost-*-scsi devices. This makes said devices unbootable
on PPC as SLOF is unable to work out the path to scan boot disks.
This makes VMs bootable on spapr when using vhost-*-scsi by implementing
a disk path for VHostSCSICommon (which currently includes both
vhost-user-scsi and vhost-scsi).
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Mike Cui <cui@nutanix.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cédric Le Goater [Mon, 5 Jun 2017 15:44:21 +0000 (17:44 +0200)]
ppc/pnv: check the return value of fdt_setprop()
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[dwg: Correct typo in commit message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Peter Maydell [Mon, 5 Jun 2017 15:14:17 +0000 (16:14 +0100)]
spapr_nvram: Check return value from blk_getlength()
The blk_getlength() function can return an error value if the
image size cannot be determined. Check for this rather than
ploughing on and trying to g_malloc0() a negative number.
(Spotted by Coverity, CID
1288484.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Suraj Jitindar Singh [Mon, 5 Jun 2017 00:49:51 +0000 (10:49 +1000)]
target/ppc: Fixup set_spr error in h_register_process_table
set_spr is used in the function h_register_process_table() to update the
LPCR_GTSE and LPCR_UPRT values based on the flags passed by the guest.
The set_spr function takes the last two arguments mask and value used to
mask and set the value of the spr respectively.
The current call site passes these arguments in the wrong order and thus
bot GTSE and UPRT will be set irrespective, which is obviously
incorrect.
Rearrange the function call so that these arguments are passed in the
correct order and the correct behaviour is exhibited.
It is worth noting that this wasn't detected earlier since these were
always both set in all cases where this H_CALL was made.
Fixes:
6de833070ca2 ("target/ppc: Set UPRT and GTSE on all cpus in H_REGISTER_PROCESS_TABLE")
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Aaron Larson [Fri, 2 Jun 2017 11:32:59 +0000 (04:32 -0700)]
target-ppc: Fix openpic timer read register offset
openpic_tmr_read() is incorrectly computing register offset of the
TCCR, TBCR, TVPR, and TDR registers when accessing the open pic timer
registers. Specifically the offset of timer registers for
openpic_tmr_read() is not accounting for the timer frequency reporting
register (TFFR) which is the first register in the "tmr" memory
region.
openpic_tmr_write() *is* correctly computing the offset by adding
0x10f0 to the address prior to computing the register index. This
patch instead subtracts 0x10 in both the read and write routines and
eliminates some other gratuitous differences between the functions.
Signed-off-by: Aaron Larson <alarson@ddci.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson [Fri, 2 Jun 2017 03:49:20 +0000 (13:49 +1000)]
spapr: Make DRC get_index and get_type methods into plain functions
These two methods only have one implementation, and the spec they're
implementing means any other implementation is unlikely, verging on
impossible.
So replace them with simple functions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
David Gibson [Fri, 2 Jun 2017 03:36:10 +0000 (13:36 +1000)]
spapr: Abolish DRC set_configured method
DRConnectorClass has a set_configured method, however:
* There is only one implementation, and only ever likely to be one
* There's exactly one caller, and that's (now) local
* The implementation is very straightforward
So abolish the method entirely, and just open-code what we need.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
David Gibson [Thu, 1 Jun 2017 00:36:24 +0000 (10:36 +1000)]
spapr: Abolish DRC get_fdt method
The DRConnectorClass includes a get_fdt method. However
* There's only one implementation, and there's only likely to ever be one
* Both callers are local to spapr_drc
* Each caller only uses one half of the actual implementation
So abolish get_fdt() entirely, and just open-code what we need.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
David Gibson [Thu, 1 Jun 2017 00:30:00 +0000 (10:30 +1000)]
spapr: Move DRC RTAS calls into spapr_drc.c
Currently implementations of the RTAS calls related to DRCs are in
spapr_rtas.c. They belong better in spapr_drc.c - that way they're closer
to related code, and we'll be able to make some more things local.
spapr_rtas.c was intended to contain the RTAS infrastructure and core calls
that don't belong anywhere else, not every RTAS implementation.
Code motion only.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
David Gibson [Fri, 26 May 2017 04:46:28 +0000 (14:46 +1000)]
migration: Mark CPU states dirty before incoming migration/loadvm
As a rule, CPU internal state should never be updated when
!cpu->kvm_vcpu_dirty (or the HAX equivalent). If that is done, then
subsequent calls to cpu_synchronize_state() - usually safe and idempotent -
will clobber state.
However, we routinely do this during a loadvm or incoming migration.
Usually this is called shortly after a reset, which will clear all the cpu
dirty flags with cpu_synchronize_all_post_reset(). Nothing is expected
to set the dirty flags again before the cpu state is loaded from the
incoming stream.
This means that it isn't safe to call cpu_synchronize_state() from a
post_load handler, which is non-obvious and potentially inconvenient.
We could cpu_synchronize_all_state() before the loadvm, but that would be
overkill since a) we expect the state to already be synchronized from the
reset and b) we expect to completely rewrite the state with a call to
cpu_synchronize_all_post_init() at the end of qemu_loadvm_state().
To clear this up, this patch introduces cpu_synchronize_pre_loadvm() and
associated helpers, which simply marks the cpu state as dirty without
actually changing anything. i.e. it says we want to discard any existing
KVM (or HAX) state and replace it with what we're going to load.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dave Gilbert <dgilbert@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Laurent Vivier [Wed, 24 May 2017 12:10:48 +0000 (14:10 +0200)]
migration: remove register_savevm()
We can replace the four remaining calls of register_savevm() by
calls to register_savevm_live(). So we can remove the function and
as we don't allocate anymore the ops pointer with g_new0()
we don't have to free it then.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Eduardo Habkost [Fri, 26 May 2017 18:12:00 +0000 (15:12 -0300)]
scripts: Test script to look for -device crashes
Test code to check if we can crash QEMU using -device. It will
test all accel/machine/device combinations by default, which may
take a few hours (it's more than 90k test cases). There's a "-r"
option that makes it test a random sample of combinations.
The scripts contains a whitelist for: 1) known error messages
that make QEMU exit cleanly; 2) known QEMU crashes.
This is the behavior when the script finds a failure:
* Known clean (exitcode=1) errors generate DEBUG messages
(hidden by default)
* Unknown clean (exitcode=1) errors will generate INFO messages
(visible by default)
* Known crashes generate error messages, but are not fatal
(unless --strict mode is used)
* Unknown crashes generate fatal error messages
Having an updated whitelist of known clean errors is useful to make the
script less verbose and run faster when in --quick mode, but the
whitelist doesn't need to be always up to date.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
20170526181200.17227-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Fri, 26 May 2017 18:11:59 +0000 (15:11 -0300)]
qemu.py: Add QEMUMachine.exitcode() method
Allow the exit code of QEMU to be queried by scripts.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
20170526181200.17227-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Fri, 26 May 2017 18:11:58 +0000 (15:11 -0300)]
qemu.py: Don't set _popen=None on error/shutdown
Keep the Popen object around to we can query its exit code later.
To keep the existing 'self._popen is None' checks working, add a
is_running() method, that will check if the process is still running.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
20170526181200.17227-2-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Igor Mammedov [Tue, 30 May 2017 16:24:01 +0000 (18:24 +0200)]
spapr: cleanup spapr_fixup_cpu_numa_dt() usage
even though spapr_fixup_cpu_numa_dt() has no effect on FDT
if numa is disabled, don't call it uselessly. It makes it
obvious at call sites that function is needed only when numa
is enabled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <
1496161442-96665-7-git-send-email-imammedo@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Igor Mammedov [Tue, 30 May 2017 16:24:00 +0000 (18:24 +0200)]
numa: move numa_node from CPUState into target specific classes
Move vcpu's associated numa_node field out of generic CPUState
into inherited classes that actually care about cpu<->numa mapping,
i.e: ARMCPU, PowerPCCPU, X86CPU.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <
1496161442-96665-6-git-send-email-imammedo@redhat.com>
[ehabkost: s/CPU is belonging to/CPU belongs to/ on comments]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Igor Mammedov [Tue, 30 May 2017 16:23:59 +0000 (18:23 +0200)]
numa: make hmp 'info numa' fetch numa nodes from qmp_query_cpus() result
HMP command 'info numa' is the last external user that access
CPUState::numa_node field directly. In order to move it to CPU
classes that actually use it, eliminate direct access and use
an alternative approach by using result of qmp_query_cpus(),
which provides topology properties CPU threads are associated
with (including node-id).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <
1496161442-96665-5-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Igor Mammedov [Tue, 30 May 2017 16:23:58 +0000 (18:23 +0200)]
numa: make sure that all cpus have has_node_id set if numa is enabled
It fixes/add missing _PXM object for non mapped CPU (x86)
and missing fdt node (virt-arm).
It ensures that possible_cpus contains complete mapping if
numa is enabled by the time machine_init() is executed.
As result non completely mapped CPUs:
1) appear in ACPI/fdt blobs
2) QMP query-hotpluggable-cpus command shows bound nodes for such CPUs
3) allows to drop checks for has_node_id in numa only code,
reducing number of invariants incomplete mapping could produce
4) moves fixup/implicit node init from runtime numa_cpu_pre_plug()
(when CPU object is created) to machine_numa_finish_init() which
helps to fix [1, 2] and make possible_cpus complete source
of numa mapping available even before CPUs are created.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <
1496161442-96665-4-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Igor Mammedov [Tue, 30 May 2017 16:23:57 +0000 (18:23 +0200)]
numa: move default mapping init to machine
there is no need use cpu_index_to_instance_props() for setting
default cpu -> node mapping. Generic machine code can do it
without cpu_index by just enabling already preset defaults
in possible_cpus.
PS:
as bonus it makes one less user of cpu_index_to_instance_props()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <
1496161442-96665-3-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Igor Mammedov [Tue, 30 May 2017 16:23:56 +0000 (18:23 +0200)]
numa: consolidate cpu_preplug fixups/checks for pc/arm/spapr
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <
1496161442-96665-2-git-send-email-imammedo@redhat.com>
[ehabkost: Fix indentation]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Mon, 5 Jun 2017 15:19:27 +0000 (12:19 -0300)]
pc: Use "min-[x]level" on compat_props
Since the automatic cpuid-level code was introduced in commit
c39c0edf9bb3b968ba95484465a50c7b19f4aa3a ("target-i386: Automatically
set level/xlevel/xlevel2 when needed"), the CPU model tables just define
the default CPUID level code (set using "min-level"). Setting
"[x]level" forces CPUID level to a specific value and disable the
automatic-level logic.
But the PC compat code was not updated and the existing "[x]level"
compat properties broke compatibility for people using features that
triggered the auto-level code. To keep previous behavior, we should set
"min-[x]level" instead of "[x]level" on compat_props.
This was not a problem for most cases, because old machine-types don't
have full-cpuid-auto-level enabled. The only common use case it broke
was the CPUID[7] auto-level code, that was already enabled since the
first CPUID[7] feature was introduced (in QEMU 1.4.0).
This causes the regression reported at:
https://bugzilla.redhat.com/show_bug.cgi?id=
1454641
Change the PC compat code to use "min-[x]level" instead of "[x]level" on
compat_props, and add new test cases to ensure we don't break this
again.
Reported-by: "Guo, Zhiyi" <zhguo@redhat.com>
Fixes:
c39c0edf9bb ("target-i386: Automatically set level/xlevel/xlevel2 when needed")
Cc: qemu-stable@nongnu.org
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Peter Maydell [Mon, 5 Jun 2017 17:03:43 +0000 (18:03 +0100)]
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-
20170605' into staging
Queued TCG patches
# gpg: Signature made Mon 05 Jun 2017 17:48:42 BST
# gpg: using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg: aka "Richard Henderson <rth@redhat.com>"
# gpg: aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC 16A4 AD12 70CC 4DD0 279B
* remotes/rth/tags/pull-tcg-
20170605: (26 commits)
target/alpha: Use goto_tb for fallthru between TBs
target/alpha: Implement WTINT inline
target/mips: optimize indirect branches
target/mips: optimize cross-page direct jumps in softmmu
target/aarch64: optimize indirect branches
target/aarch64: optimize cross-page direct jumps in softmmu
target/hppa: Use tcg_gen_lookup_and_goto_ptr
target/s390: Use tcg_gen_lookup_and_goto_ptr
tcg/mips: implement goto_ptr
tcg/arm: Implement goto_ptr
tcg/arm: Clarify tcg_out_bx for arm4 host
tcg/s390: Implement goto_ptr
tcg/sparc: Implement goto_ptr
tcg/aarch64: Implement goto_ptr
tcg/ppc: Implement goto_ptr
tb-hash: improve tb_jmp_cache hash function in user mode
target/i386: optimize indirect branches
target/i386: optimize cross-page direct jumps in softmmu
target/i386: introduce gen_jr helper to generate lookup_and_goto_ptr
target/arm: optimize indirect branches
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Thu, 25 May 2017 02:17:51 +0000 (19:17 -0700)]
target/alpha: Use goto_tb for fallthru between TBs
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Mon, 8 May 2017 17:23:29 +0000 (10:23 -0700)]
target/alpha: Implement WTINT inline
Signed-off-by: Richard Henderson <rth@twiddle.net>
Aurelien Jarno [Sun, 30 Apr 2017 14:52:54 +0000 (16:52 +0200)]
target/mips: optimize indirect branches
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <
20170430145254.25616-4-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Aurelien Jarno [Sun, 30 Apr 2017 14:52:53 +0000 (16:52 +0200)]
target/mips: optimize cross-page direct jumps in softmmu
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <
20170430145254.25616-3-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Emilio G. Cota [Fri, 28 Apr 2017 18:59:23 +0000 (14:59 -0400)]
target/aarch64: optimize indirect branches
Measurements:
[Baseline performance is that before applying this and the previous commit]
- NBench, aarch64-softmmu. Host: Intel i7-4790K @ 4.00GHz
1.7x +-+--------------------------------------------------------------------------------------------------------------+-+
| |
| cross |
1.6x +cross+jr.................................................####...................................................+-+
| #++# |
| # # |
1.5x +-+...................................................*****..#...................................................+-+
| *+++* # |
| * * # |
1.4x +-+...................................................*...*..#...................................................+-+
| * * # |
| ##### * * # |
1.3x +-+................................****+++#...........*...*..#...................................................+-+
| *++* # * * # |
| * * # * * # |
1.2x +-+................................*..*...#...........*...*..#...................................................+-+
| * * # * * # |
| #### * * # * * # |
1.1x +-+.......................+++#..#..*..*...#...........*...*..#...................................................+-+
| **** # * * # * * # ****#### |
| * * # * * # * * # ****### +++#### ****### * * # |
1x +-++-++++++-++++****###++-*++*++#++*++*+-+#++****+++++*+++*++#++*++*-+#++*****++#++****###-++*++*-+#++*+-*+++#+-++-+
| *****### * * # * * # * * # *++*### * * # * * # * * # * *++# * * # * * # |
| * *++# * * # * * # * * # * * # * * # * * # * * # * * # * * # * * # |
0.9x +-+---*****###--****###---****###--****####--****###--*****###--****###--*****###--****###---****###--****####---+-+
ASSIGNMENT BITFIELD FOURFP EMULATION HUFFMAN LU DECOMPOSITIONNEURAL NUMERIC SORSTRING SORT hmean
png: http://imgur.com/qO9ubtk
NB. cross here represents the previous commit.
- SPECint06 (test set), aarch64-linux-user. Host: Intel i7-4790K @ 4.00GHz
1.5x +-+--------------------------------------------------------------------------------------------------------------+-+
| ***** |
| *+++* jr |
| * * |
1.4x +-+.....................................................................*...*.....................+++............+-+
| * * | |
| ***** * * | |
| * * * * ***** |
1.3x +-+....................................*...*............................*...*....................*.|.*...........+-+
| +++ * * * * * | * |
| ***** * * * * *+++* |
| * * * * * * * * |
1.2x +-+....................*...*...........*...*............................*...*...........*****....*...*...........+-+
| ***** * * * * * * * * * * +++ |
| * * * * * * * * * * * * ***** |
| * * * * ***** * * * * * * * * * * |
1.1x +-+...*...*............*...*...*...*...*...*............................*...*....+++....*...*....*...*...*...*...+-+
| * * * * * * * * * * ***** * * * * * * |
| * * * * * * * * ***** * * * * * * * * * * |
| * * ***** * * * * * * * * ****** * * * * * * * * * * |
1x +-++-+*+++*-++*+++*++++*+-+*+++*-++*+++*-++*+++*+++*++-*++++*-++*****+++*++-*+++*++-*+++*+-+*++++*+++*++-*+++*+-++-+
| * * * * * * * * * * * * * * *+++* * * * * * * * * * * |
| * * * * * * * * * * * * * * * * * * * * * * * * * * |
| * * * * * * * * * * * * * * * * * * * * * * * * * * |
0.9x +-+---*****---*****----*****---*****---*****---*****---******---*****---*****---*****---*****----*****---*****---+-+
astar bzip2 gcc gobmk h264ref hmmlibquantum mcf omnetpperlbench sjengxalancbmk hmean
png: http://imgur.com/3Dp4vvq
- SPECint06 (train set), aarch64-linux-user. Host: Intel i7-4790K @ 4.00GHz
1.7x +-+--------------------------------------------------------------------------------------------------------------+-+
| |
| jr |
1.6x +-+...............................................................................................+++............+-+
| ***** |
| *+++* |
| * * |
1.5x +-+..............................................................................................*...*...........+-+
| +++ * * |
| ***** * * |
1.4x +-+.....................................................................*+++*....................*...*...........+-+
| * * * * |
| ***** * * * * |
| * * * * ***** * * |
1.3x +-+....................................*...*............................*...*...*...*............*...*...........+-+
| +++ * * * * * * * * |
| ***** * * * * * * ***** * * |
1.2x +-+....................*...*...........*...*............................*...*...*...*...*+++*....*...*...*****...+-+
| * * * * * * * * * * * * *+++* |
| ***** * * ***** * * * * * * * * * * * * |
| * * * * *+++* * * * * * * * * * * * * |
1.1x +-+...*...*............*...*...*...*...*...*............................*...*...*...*...*...*....*...*...*...*...+-+
| * * ***** * * * * * * ***** * * * * * * * * * * |
| * * * * * * * * * * +++ ****** *+++* * * * * * * * * * * |
1x +-+---*****---*****----*****---*****---*****---*****---******---*****---*****---*****---*****----*****---*****---+-+
astar bzip2 gcc gobmk h264ref hmmlibquantum mcf omnetpperlbench sjengxalancbmk hmean
png: http://imgur.com/vRrdc9j
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Emilio G. Cota [Fri, 28 Apr 2017 18:57:41 +0000 (14:57 -0400)]
target/aarch64: optimize cross-page direct jumps in softmmu
Perf numbers in next commit's log.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Sun, 30 Apr 2017 11:38:18 +0000 (13:38 +0200)]
target/hppa: Use tcg_gen_lookup_and_goto_ptr
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Sun, 30 Apr 2017 11:32:10 +0000 (13:32 +0200)]
target/s390: Use tcg_gen_lookup_and_goto_ptr
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Aurelien Jarno [Sun, 30 Apr 2017 14:52:52 +0000 (16:52 +0200)]
tcg/mips: implement goto_ptr
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <
20170430145254.25616-2-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 28 Apr 2017 07:49:45 +0000 (09:49 +0200)]
tcg/arm: Implement goto_ptr
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 28 Apr 2017 07:45:57 +0000 (09:45 +0200)]
tcg/arm: Clarify tcg_out_bx for arm4 host
In theory this would re-enable usage of QEMU on an armv4 host.
Whether this is worthwhile is debatable -- we've been unconditionally
issuing the armv5t BX instruction in the prologue since 2011 without
complaint. Possibly we should simply require an armv6 host.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 26 Apr 2017 22:40:59 +0000 (18:40 -0400)]
tcg/s390: Implement goto_ptr
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 26 Apr 2017 17:46:12 +0000 (10:46 -0700)]
tcg/sparc: Implement goto_ptr
Signed-off-by: Richard Henderson <rth@twiddle.net>