OSDN Git Service
Peter Maydell [Tue, 10 Sep 2019 13:52:09 +0000 (14:52 +0100)]
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-100919-2' into staging
Testing fixes:
- podman cleanups
- docker.py python3 fixes (encode)
- DEF_TARGET_LIST applied to cross build images
- move a bunch to Buster based images
- enable Travis caching
- more common objs for faster builds
- stable URLs for acceptance tests
- additional travis dependencies
- work around ppc64abi32 linux-test breakage [v2]
# gpg: Signature made Tue 10 Sep 2019 14:16:00 BST
# gpg: using RSA key
6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-next-100919-2: (46 commits)
tests/tcg: fix typo when calling clean-tcg
travis.yml: Install libcap-dev for testing virito-9p
Fedora images: use URLs from stable "archives.fedoraproject.org"
.travis.yml: Cache Linux/Clang jobs together
.travis.yml: Cache Linux/GCC 'non-debug profile' jobs together
.travis.yml: Cache Linux/GCC 'debug profile' jobs together
.travis.yml: Document how the build matrix use caches
.travis.yml: Enable ccache on OSX
.travis.yml: Improve ccache use
.travis.yml: Cache Avocado cache
.travis.yml: Cache Python PIP packages
.travis.yml: Increase cache timeout from 3min to 20min
.travis.yml: Enable multiple caching features
configure: check if --no-pie is supported first
tests/docker: --disable-libssh on ubuntu1804 builds
tests/docker: add more images to PARTIAL_IMAGES when not on x86_64
tests/docker: use --arch-only for installing deps
tests/docker: add debian-amd64-cross for non-x86 hosts
tests/docker: avoid $SHELL invoke bash directly
tests/docker: add debian9-mxe to DEBIAN_PARTIAL_IMAGES
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alex Bennée [Tue, 10 Sep 2019 12:09:31 +0000 (13:09 +0100)]
tests/tcg: fix typo when calling clean-tcg
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Thomas Huth [Thu, 5 Sep 2019 11:33:46 +0000 (13:33 +0200)]
travis.yml: Install libcap-dev for testing virito-9p
So far we were not testing virtio-9p in Travis yet, since we forgot to
install libcap-devel. Do it now to get some more test coverage.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20190905113346.2473-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cleber Rosa [Wed, 4 Sep 2019 00:52:18 +0000 (20:52 -0400)]
Fedora images: use URLs from stable "archives.fedoraproject.org"
The LinuxInitrd.test_with_2gib_file_should_work_with_linux_v4_16 test,
from tests/acceptance/linux_initrd.py, is currently failing to fetch
the "vmlinuz" file. The reason for the failure is that the Fedora
project retires older versions from the "dl.fedoraproject.org" URL,
and keeps them in "archives.fedoraproject.org". As an added note,
that test uses a Fedora 28 image, because of the specific Linux kernel
version requirements of the test.
For the sake of stability, let's use URLs from the archived and
supposedely ever stable URLs. The good news is that the currently
supported versions are also hosted on the later. This change limits
itself to change the URLs, while keeping the fetched files the same
(as can be evidenced by the unchanged hashes).
Documentation and the "vm tests" fedora definition were also updated.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Yash Mankad <ymankad@redhat.com>
Message-Id: <
20190904005218.12536-1-crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Philippe Mathieu-Daudé [Tue, 3 Sep 2019 13:26:49 +0000 (15:26 +0200)]
.travis.yml: Cache Linux/Clang jobs together
These jobs build different components but use the same
host features. Put them in the same cache bucket.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Philippe Mathieu-Daudé [Tue, 3 Sep 2019 13:26:48 +0000 (15:26 +0200)]
.travis.yml: Cache Linux/GCC 'non-debug profile' jobs together
These jobs build different components but use the same
host features. Put them in the same cache bucket.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Philippe Mathieu-Daudé [Tue, 3 Sep 2019 13:26:47 +0000 (15:26 +0200)]
.travis.yml: Cache Linux/GCC 'debug profile' jobs together
These jobs build different components but use the same
host features. Put them in the same cache bucket.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Philippe Mathieu-Daudé [Tue, 3 Sep 2019 13:26:46 +0000 (15:26 +0200)]
.travis.yml: Document how the build matrix use caches
We will set the CACHE_NAME variable to improve the caching
of various jobs using the same characteristics. Document it
first.
See https://docs.travis-ci.com/user/caching/#caches-and-build-matrices
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Philippe Mathieu-Daudé [Tue, 3 Sep 2019 13:26:45 +0000 (15:26 +0200)]
.travis.yml: Enable ccache on OSX
By default, ccache is not installed on macOS environments.
See https://docs.travis-ci.com/user/caching/#ccache-on-macos
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Philippe Mathieu-Daudé [Tue, 3 Sep 2019 13:26:44 +0000 (15:26 +0200)]
.travis.yml: Improve ccache use
Per https://ccache.dev/manual/latest.html:
By default, ccache tries to give as few false cache hits as
possible. However, in certain situations it’s possible that
you know things that ccache can’t take for granted.
[The CCACHE_SLOPINESS environment variable] makes it possible
to tell ccache to relax some checks in order to increase the
hit rate.
We can relax the ctime/mtime header checks:
- include_file_ctime
By default, ccache also will not cache a file if it
includes a header whose ctime is too new. This option
disables that check.
- include_file_mtime
By default, ccache will not cache a file if it includes
a header whose mtime is too new. This option disables
that check.
We also add a call to clear the cache statistics before running
the build, and display them when the build finishes.
See https://docs.travis-ci.com/user/caching/#ccache-cache
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Philippe Mathieu-Daudé [Tue, 3 Sep 2019 13:26:43 +0000 (15:26 +0200)]
.travis.yml: Cache Avocado cache
Avocado tests download artifacts from various sources.
These sources sometime have network issues resulting in build
failures. Cache Avocado cache to reduce build failure.
See https://docs.travis-ci.com/user/caching/#arbitrary-directories
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Philippe Mathieu-Daudé [Tue, 3 Sep 2019 13:26:42 +0000 (15:26 +0200)]
.travis.yml: Cache Python PIP packages
We always install the same packages ever and ever, cache them.
See https://docs.travis-ci.com/user/caching/#pip-cache
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Philippe Mathieu-Daudé [Tue, 3 Sep 2019 13:26:41 +0000 (15:26 +0200)]
.travis.yml: Increase cache timeout from 3min to 20min
We are going to cache few gigabytes, increase the cache timeout
to avoid build failures when uploading our cache.
See https://docs.travis-ci.com/user/caching/#setting-the-timeout
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Philippe Mathieu-Daudé [Tue, 3 Sep 2019 13:26:40 +0000 (15:26 +0200)]
.travis.yml: Enable multiple caching features
Using the 'multiple caching features' means explode the YAML array,
thus it eases the git workflow (it is easier to move patches around).
See https://docs.travis-ci.com/user/caching#enabling-multiple-caching-features
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20170809202712.6951-4-f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Thu, 15 Aug 2019 19:41:51 +0000 (19:41 +0000)]
configure: check if --no-pie is supported first
For whatever reason this doesn't trigger normally but because
compile_prog uses QEMU_CFLAGS we end up trying to build a -pie
--no-pie build which confuses compilers on some non-x86 hosts.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Wed, 4 Sep 2019 18:07:14 +0000 (19:07 +0100)]
tests/docker: --disable-libssh on ubuntu1804 builds
Currently this stops the mega:
make docker-test-build
from working. Once the source is patched to deal with the case this
workaround can be removed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Thu, 15 Aug 2019 19:40:48 +0000 (19:40 +0000)]
tests/docker: add more images to PARTIAL_IMAGES when not on x86_64
This prevents us trying to do builds which we can't complete.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Thu, 15 Aug 2019 19:39:16 +0000 (19:39 +0000)]
tests/docker: use --arch-only for installing deps
The Debian QEMU packages require a bunch of cross compilers for
building firmware which aren't available on all host architectures.
Using --arch-only skips this particular requirement and allows us to
install just the dependencies we need.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Wed, 14 Aug 2019 15:25:50 +0000 (15:25 +0000)]
tests/docker: add debian-amd64-cross for non-x86 hosts
When building on a non-x86 host we need to setup the x86 build like
any other cross compiler.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Wed, 14 Aug 2019 09:54:26 +0000 (10:54 +0100)]
tests/docker: avoid $SHELL invoke bash directly
On some images SHELL is pointing at a limited /bin/sh which doesn't
understand noprofile/norc. Given the run script is running bash just
invoke it directly.
This fixes:
$ make docker-test-build@IMAGE DEBUG=1
[...]
+ echo ' ./test-build'
./test-build
+ echo '* Hit Ctrl-D to continue, or type '\''exit 1'\'' to abort'
* Hit Ctrl-D to continue, or type 'exit 1' to abort
+ echo
+ /bin/sh --noprofile --norc
/bin/sh: 0: Illegal option --
Fixes:
2b0c4fa13f3
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Wed, 14 Aug 2019 11:06:31 +0000 (12:06 +0100)]
tests/docker: add debian9-mxe to DEBIAN_PARTIAL_IMAGES
Another image that can't be used directly to build QEMU.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Tue, 13 Aug 2019 16:09:43 +0000 (17:09 +0100)]
tests/docker: add debian-xtensa-cross to DEBIAN_PARTIAL_IMAGES
This should have been marked when the docker recipe was added to
prevent it being used for cross compiling QEMU. Sort the
DEBIAN_PARTIAL_IMAGE list while we are at it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Mon, 9 Sep 2019 10:11:49 +0000 (11:11 +0100)]
tests/docker: pin powerpc-user-cross to a snapshot
Now Jessie has entered LTS the powerpc architecture has been dropped
so we can no longer build the image from scratch. However we can use
the snapshot archive to build the last working version.
This now only lives on an example of setting up a user-cross image as
at least on x86-64 we can use the Buster packaged cross compiler for
building test images.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Mon, 9 Sep 2019 09:43:46 +0000 (10:43 +0100)]
tests/docker: update Debian Sid image
While we are not currently using it we might as well keep the image
for later usage. So:
- update to a more recent snapshot
- clean up verbiage in commentary
- remove duplicate shell from a merge failure
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Tue, 13 Aug 2019 14:57:39 +0000 (15:57 +0100)]
tests/docker: move our ppc64 cross compile to Buster
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Tue, 13 Aug 2019 14:53:46 +0000 (15:53 +0100)]
tests/docker: move our riscv64 cross compile to Buster
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Tue, 13 Aug 2019 14:47:50 +0000 (15:47 +0100)]
tests/docker: move our mips64 cross compile to Buster
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Tue, 13 Aug 2019 14:24:32 +0000 (15:24 +0100)]
tests/docker: move our sh4 cross compile to Buster
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Tue, 13 Aug 2019 14:16:48 +0000 (15:16 +0100)]
tests/docker: move our sparc64 cross compile to Buster
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Mon, 12 Aug 2019 16:07:37 +0000 (17:07 +0100)]
tests/docker: move our m68k cross compile to Buster
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Mon, 12 Aug 2019 14:55:57 +0000 (15:55 +0100)]
tests/docker: move our HPPA cross compile to Buster
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Mon, 12 Aug 2019 14:47:10 +0000 (15:47 +0100)]
tests/docker: move our Alpha cross compile to Buster
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Mon, 12 Aug 2019 14:44:44 +0000 (15:44 +0100)]
tests/docker: move our powerpc cross compile to Buster
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Mon, 12 Aug 2019 14:08:28 +0000 (15:08 +0100)]
tests/docker: move our arm64 cross compile to Buster
Now Buster is released we can unify our cross build images for both
QEMU and tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Wed, 14 Aug 2019 09:55:42 +0000 (10:55 +0100)]
tests/docker: add Buster to DOCKER_PARTIAL_IMAGES
We need to add additional packages to the base images to be able to
build QEMU so lets avoid building with it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Fri, 9 Aug 2019 13:50:52 +0000 (14:50 +0100)]
tests/docker: set DEF_TARGET_LIST for some containers
You can assume the failures most people are interested in are the
cross-compile failures that are specific to the cross compile target.
Set DEF_TARGET_LIST based on what we use for shippable, the user can
always override by calling with TARGET_LIST set.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Fri, 9 Aug 2019 13:48:45 +0000 (14:48 +0100)]
tests/docker: move DEF_TARGET_LIST setting to common.rc
We might as well not repeat ourselves. At the same time allow it to be
overridden which we will use later from docker targets.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Tue, 3 Sep 2019 12:59:49 +0000 (13:59 +0100)]
tests/tcg: add .gitignore for in source builds
This hides the new build artefacts from the re-organised TCG tests when
you are doing an in-source build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Paolo Bonzini [Wed, 7 Aug 2019 14:35:23 +0000 (16:35 +0200)]
tests/tcg: move configuration to a sub-shell script
Avoid the repeated inclusions of config-target.mak, which have
risks of namespace pollution, and instead build minimal configuration
files in a configuration script. The same configuration files can
also be included in Makefile and Makefile.qemu
[AJB 10/09/19]
In the original PR this had inadvertently enabled tests
for ppc64abi32. However as the rest of the multiarch tests work rather
than disabling the otherwise correctly functioning build I've just
skipped the failing linux-test test. For some reason I can't debug it
with TCG so I'm leaving that to the PPC maintainers to look at.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20190807143523.15917-4-pbonzini@redhat.com>
[AJB: s/docker/container/, rm last bits from configure, ppc6432abi hack]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Paolo Bonzini [Wed, 7 Aug 2019 14:35:22 +0000 (16:35 +0200)]
tests/tcg: cleanup Makefile inclusions
Rename Makefile.probe to Makefile.prereqs and make it actually
define rules for the tests.
Rename Makefile to Makefile.target, since it is not a toplevel
makefile.
Rename Makefile.include to Makefile.qemu and disentangle it
from the QEMU Makefile.target, so that it is invoked recursively
by tests/Makefile.include. Tests are now placed in
tests/tcg/$(TARGET).
Drop the usage of TARGET_BASE_ARCH, which is ignored by everything except
x86_64 and aarch64. Fix x86 tests by using -cpu max and, while
at it, standardize on QEMU_OPTS for aarch64 tests too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20190807143523.15917-3-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Paolo Bonzini [Wed, 7 Aug 2019 14:35:21 +0000 (16:35 +0200)]
tests/tcg: use EXTRA_CFLAGS everywhere
For i386 specifically, this allows using the host GCC
to compile the i386 tests. But, it should really be
done for all targets, unless we want to pass $(EXTRA_CFLAGS)
directly as part of $(CC).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20190807143523.15917-2-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Mon, 9 Sep 2019 10:36:20 +0000 (11:36 +0100)]
tests/docker: fix final missing .encode when parsing solibs
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Wed, 4 Sep 2019 17:46:36 +0000 (18:46 +0100)]
tests/docker: handle missing encoding keyword for subprocess.check_output
This was only added in Python 3.6 and not all the build hosts have
that recent a python3. However we still need to ensure everything is
returns as a unicode string so checks higher up the call chain don't
barf.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
fixup! tests/docker: handle missing encoding keyword for subprocess.check_output
Alex Bennée [Wed, 4 Sep 2019 09:07:17 +0000 (10:07 +0100)]
tests/docker: fix "cc" command to work with podman
Podman requires a little bit of additional magic to the uid mapping
which was already done for the normal RunCommand. We simplify the
logic by pushing it directly into the Docker::run method to avoid
instantiating an extra Docker() object and ensure the CC command
always runs as the current user.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
John Snow [Wed, 4 Sep 2019 23:24:51 +0000 (19:24 -0400)]
tests/docker: Use --userns=keep-id for podman
The workaround that attempts to accomplish the same result as --userns=keep-id
does not appear to work well with UIDs much above 1000 (like mine, which is
above 20000.)
Since we have official support for this "trick" now, use the supported method.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <
20190904232451.26466-1-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Tue, 3 Sep 2019 09:33:39 +0000 (10:33 +0100)]
configure: clean-up container cross compile detect
The introduction of podman support inadvertently broke configure's
detect of the container support as the configure probe didn't specify
an engine type. To fix this in docker.py:
- only (re)set USE_ENGINE if --engine is specified
- enhance the output so docker is no longer just yes
In the configure script we can at least start cleaning up the
detecting and naming of variables. To avoid too much churn the
conversion of the various make DOCKER_foo variables has been left for
future clean-ups.
Fixes:
9459f754134b
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: David Hildenbrand <david@redhat.com>
Thomas Huth [Mon, 2 Sep 2019 16:26:38 +0000 (18:26 +0200)]
hw/misc: Mark most objects as "common" code to speed up compilation a litte bit
Most of the code in hw/misc/ does not directly depend on CPU-specific
code. Mark it as "common" so that the code can be shared between e.g.
qemu-system-arm and qemu-system-aarch64, or between the various mips
flavours, instead of recompiling it for each and every target again
and again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20190902162638.28142-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Peter Maydell [Mon, 9 Sep 2019 08:48:34 +0000 (09:48 +0100)]
Merge remote-tracking branch 'remotes/huth-gitlab/tags/m68k-pull-2019-09-07' into staging
Add the m68k next-cube machine
# gpg: Signature made Sat 07 Sep 2019 16:32:53 BST
# gpg: using RSA key
27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "huth@tuxfamily.org"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/m68k-pull-2019-09-07:
.travis.yml: Let the avocado job run the NeXTcube tests
tests/acceptance: Add test of NeXTcube framebuffer using OCR
m68k: Add an entry for the NeXTcube machine to the MAINTAINERS file
m68k: Add serial controller to the NeXTcube machine
escc: introduce a selector for the register bit
m68k: Add NeXTcube machine
m68k: Add NeXTcube keyboard device
m68k: Add NeXTcube framebuffer device emulation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Tue, 13 Aug 2019 13:49:20 +0000 (15:49 +0200)]
.travis.yml: Let the avocado job run the NeXTcube tests
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20190813134921.30602-3-philmd@redhat.com>
[huth: Rebased patch to master branch]
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Philippe Mathieu-Daudé [Tue, 13 Aug 2019 13:49:19 +0000 (15:49 +0200)]
tests/acceptance: Add test of NeXTcube framebuffer using OCR
Add a test of the NeXTcube framebuffer using the Tesseract OCR
engine on a screenshot of the framebuffer device.
The test is very quick:
$ avocado --show=app,console run tests/acceptance/machine_m68k_nextcube.py
JOB ID :
78844a92424cc495bd068c3874d542d1e20f24bc
JOB LOG : /home/phil/avocado/job-results/job-2019-08-13T13.16-
78844a9/job.log
(1/3) tests/acceptance/machine_m68k_nextcube.py:NextCubeMachine.test_bootrom_framebuffer_size: PASS (2.16 s)
(2/3) tests/acceptance/machine_m68k_nextcube.py:NextCubeMachine.test_bootrom_framebuffer_ocr_with_tesseract_v3: -
ue r pun Honl'flx ; 5‘ 55‘
avg ncaaaaa 25 MHZ, memary jag m
Backplane slat «a
Ethernet address a a r a r3 2
Memgry sackets aea canflqured far 16MB Darlly page made stMs but have 16MB page made stMs )nstalled
Memgry sackets a and 1 canflqured far 16MB Darlly page made stMs but have 16MB page made stMs )nstalled
[...]
Yestlnq the rpu, 5::
system test raneg Errar egge 51
Egg: cammand
Default pggc devlce nut fauna
NEXY>I
PASS (2.64 s)
(3/3) tests/acceptance/machine_m68k_nextcube.py:NextCubeMachine.test_bootrom_framebuffer_ocr_with_tesseract_v4: SKIP: tesseract v4 OCR tool not available
RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 1 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 5.35 s
Documentation on how to install tesseract:
https://github.com/tesseract-ocr/tesseract/wiki#installation
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20190813134921.30602-2-philmd@redhat.com>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Thomas Huth [Sat, 30 Jun 2018 08:33:57 +0000 (08:33 +0000)]
m68k: Add an entry for the NeXTcube machine to the MAINTAINERS file
I don't have much clue about the NeXT hardware, but at least I know now
the source files a little bit, so I volunteer to pick up patches and send
PULL requests for them until someone else with more knowledge steps up
to do this job instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20190831074519.32613-7-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Thomas Huth [Sat, 30 Jun 2018 14:58:01 +0000 (16:58 +0200)]
m68k: Add serial controller to the NeXTcube machine
The NeXTcube uses a normal 8530 serial controller, so we can simply use
our normal "escc" device here.
While we're at it, also add a boot-serial-test for the next-cube machine,
now that the serial output works.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20190831074519.32613-6-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Laurent Vivier [Sat, 25 May 2019 22:50:04 +0000 (00:50 +0200)]
escc: introduce a selector for the register bit
On Sparc and PowerMac, the bit 0 of the address selects the register
type (control or data) and bit 1 selects the channel (B or A).
On m68k Macintosh and NeXTcube, the bit 0 selects the channel and
bit 1 the register type.
This patch introduces a new parameter (bit_swap) to the device interface
to indicate bits usage must be swapped between registers and channels.
For the moment all the machines use the bit 0, but this change will be
needed to emulate the Quadra 800 or NeXTcube machine.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
[thh: added NeXTcube to the patch description]
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20190831074519.32613-5-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Thomas Huth [Sat, 30 Jun 2018 06:45:25 +0000 (08:45 +0200)]
m68k: Add NeXTcube machine
It is still quite incomplete (no SCSI, no floppy emulation, no network,
etc.), but the firmware already shows up the debug monitor prompt in the
framebuffer display, so at least the very basics are already working.
This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at
https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-cube.c
and altered quite a bit to fit the latest interface and coding conventions
of the current QEMU.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20190831074519.32613-4-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Thomas Huth [Sat, 30 Jun 2018 05:50:23 +0000 (07:50 +0200)]
m68k: Add NeXTcube keyboard device
It is likely still quite incomplete (e.g. mouse and interrupts are not
implemented yet), but it is good enough for keyboard input at the firmware
monitor.
This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at
https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-kbd.c
and altered to fit the latest interface of the current QEMU (e.g. to use
memory_region_init_io() instead of cpu_register_physical_memory()).
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20190831074519.32613-3-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Thomas Huth [Sat, 30 Jun 2018 05:19:42 +0000 (07:19 +0200)]
m68k: Add NeXTcube framebuffer device emulation
The NeXTcube uses a linear framebuffer with 4 greyscale colors and
a fixed resolution of 1120 * 832.
This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at
https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-fb.c
and altered to fit the latest interface of the current QEMU (e.g.
the device has been "qdev"-ified etc.).
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20190831074519.32613-2-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Peter Maydell [Fri, 6 Sep 2019 08:28:31 +0000 (09:28 +0100)]
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-09-05-v2' into staging
nbd patches for 2019-09-05
- Advertise NBD_FLAG_CAN_MULTI_CONN on readonly images
- Tolerate larger set of server error responses during handshake
- More precision on handling fallocate() failures due to alignment
- Better documentation of NBD connection URIs
- Implement new extension NBD_CMD_FLAG_FAST_ZERO to benefit qemu-img convert
# gpg: Signature made Thu 05 Sep 2019 22:08:17 BST
# gpg: using RSA key
71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2019-09-05-v2:
nbd: Implement server use of NBD FAST_ZERO
nbd: Implement client use of NBD FAST_ZERO
nbd: Prepare for NBD_CMD_FLAG_FAST_ZERO
nbd: Improve per-export flag handling in server
docs: Update preferred NBD device syntax
block: workaround for unaligned byte range in fallocate()
nbd: Tolerate more errors to structured reply request
nbd: Use g_autofree in a few places
nbd: Advertise multi-conn for shared read-only connections
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Blake [Fri, 23 Aug 2019 14:37:25 +0000 (09:37 -0500)]
nbd: Implement server use of NBD FAST_ZERO
The server side is fairly straightforward: we can always advertise
support for detection of fast zero, and implement it by mapping the
request to the block layer BDRV_REQ_NO_FALLBACK.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
20190823143726.27062-5-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: update iotests 223, 233]
Eric Blake [Fri, 23 Aug 2019 14:37:24 +0000 (09:37 -0500)]
nbd: Implement client use of NBD FAST_ZERO
The client side is fairly straightforward: if the server advertised
fast zero support, then we can map that to BDRV_REQ_NO_FALLBACK
support. A server that advertises FAST_ZERO but not WRITE_ZEROES
is technically broken, but we can ignore that situation as it does
not change our behavior.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
20190823143726.27062-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Eric Blake [Fri, 23 Aug 2019 14:37:23 +0000 (09:37 -0500)]
nbd: Prepare for NBD_CMD_FLAG_FAST_ZERO
Commit
fe0480d6 and friends added BDRV_REQ_NO_FALLBACK as a way to
avoid wasting time on a preliminary write-zero request that will later
be rewritten by actual data, if it is known that the write-zero
request will use a slow fallback; but in doing so, could not optimize
for NBD. The NBD specification is now considering an extension that
will allow passing on those semantics; this patch updates the new
protocol bits and 'qemu-nbd --list' output to recognize the bit, as
well as the new errno value possible when using the new flag; while
upcoming patches will improve the client to use the feature when
present, and the server to advertise support for it.
The NBD spec recommends (but not requires) that ENOTSUP be avoided for
all but failures of a fast zero (the only time it is mandatory to
avoid an ENOTSUP failure is when fast zero is supported but not
requested during write zeroes; the questionable use is for ENOTSUP to
other actions like a normal write request). However, clients that get
an unexpected ENOTSUP will either already be treating it the same as
EINVAL, or may appreciate the extra bit of information. We were
equally loose for returning EOVERFLOW in more situations than
recommended by the spec, so if it turns out to be a problem in
practice, a later patch can tighten handling for both error codes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
20190823143726.27062-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: tweak commit message, also handle EOPNOTSUPP]
Eric Blake [Fri, 23 Aug 2019 14:37:22 +0000 (09:37 -0500)]
nbd: Improve per-export flag handling in server
When creating a read-only image, we are still advertising support for
TRIM and WRITE_ZEROES to the client, even though the client should not
be issuing those commands. But seeing this requires looking across
multiple functions:
All callers to nbd_export_new() passed a single flag based solely on
whether the export allows writes. Later, we then pass a constant set
of flags to nbd_negotiate_options() (namely, the set of flags which we
always support, at least for writable images), which is then further
dynamically modified with NBD_FLAG_SEND_DF based on client requests
for structured options. Finally, when processing NBD_OPT_EXPORT_NAME
or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the
runtime set of flags we've built up over several functions.
Let's refactor things to instead compute a baseline of flags as soon
as possible which gets shared between multiple clients, in
nbd_export_new(), and changing the signature for the callers to pass
in a simpler bool rather than having to figure out flags. We can then
get rid of the 'myflags' parameter to various functions, and instead
refer to client for everything we need (we still have to perform a
bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and
NBD_OPT_EXPORT_GO, but it's easier to see what is being computed).
This lets us quit advertising senseless flags for read-only images, as
well as making the next patch for exposing FAST_ZERO support easier to
write.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
20190823143726.27062-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: improve commit message, update iotest 223]
Eric Blake [Tue, 3 Sep 2019 14:56:34 +0000 (09:56 -0500)]
docs: Update preferred NBD device syntax
Mention the preferred URI form, especially since NBD is trying to
standardize that form: https://lists.debian.org/nbd/2019/06/msg00012.html
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
20190903145634.20237-1-eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Andrey Shinkevich [Tue, 27 Aug 2019 13:52:53 +0000 (16:52 +0300)]
block: workaround for unaligned byte range in fallocate()
Revert the commit
118f99442d 'block/io.c: fix for the allocation failure'
and use better error handling for file systems that do not support
fallocate() for an unaligned byte range. Allow falling back to pwrite
in case fallocate() returns EINVAL.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <
1566913973-15490-1-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Eric Blake [Sat, 24 Aug 2019 17:28:13 +0000 (12:28 -0500)]
nbd: Tolerate more errors to structured reply request
A server may have a reason to reject a request for structured replies,
beyond just not recognizing them as a valid request; similarly, it may
have a reason for rejecting a request for a meta context. It doesn't
hurt us to continue talking to such a server; otherwise 'qemu-nbd
--list' of such a server fails to display all available details about
the export.
Encountered when temporarily tweaking nbdkit to reply with
NBD_REP_ERR_POLICY. Present since structured reply support was first
added (commit
d795299b reused starttls handling, but starttls is
different in that we can't fall back to other behavior on any error).
Note that for an unencrypted client trying to connect to a server that
requires encryption, this defers the point of failure to when we
finally execute a strict command (such as NBD_OPT_GO or NBD_OPT_LIST),
now that the intermediate NBD_OPT_STRUCTURED_REPLY does not diagnose
NBD_REP_ERR_TLS_REQD as fatal; but as the protocol eventually gets us
to a command where we can't continue onwards, the changed error
message doesn't cause any security concerns.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
20190824172813.29720-3-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[eblake: fix iotest 233]
Eric Blake [Sat, 24 Aug 2019 17:28:12 +0000 (12:28 -0500)]
nbd: Use g_autofree in a few places
Thanks to our recent move to use glib's g_autofree, I can join the
bandwagon. Getting rid of gotos is fun ;)
There are probably more places where we could register cleanup
functions and get rid of more gotos; this patch just focuses on the
labels that existed merely to call g_free.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
20190824172813.29720-2-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Eric Blake [Thu, 15 Aug 2019 18:50:24 +0000 (13:50 -0500)]
nbd: Advertise multi-conn for shared read-only connections
The NBD specification defines NBD_FLAG_CAN_MULTI_CONN, which can be
advertised when the server promises cache consistency between
simultaneous clients (basically, rules that determine what FUA and
flush from one client are able to guarantee for reads from another
client). When we don't permit simultaneous clients (such as qemu-nbd
without -e), the bit makes no sense; and for writable images, we
probably have a lot more work before we can declare that actions from
one client are cache-consistent with actions from another. But for
read-only images, where flush isn't changing any data, we might as
well advertise multi-conn support. What's more, advertisement of the
bit makes it easier for clients to determine if 'qemu-nbd -e' was in
use, where a second connection will succeed rather than hang until the
first client goes away.
This patch affects qemu as server in advertising the bit. We may want
to consider patches to qemu as client to attempt parallel connections
for higher throughput by spreading the load over those connections
when a server advertises multi-conn, but for now sticking to one
connection per nbd:// BDS is okay.
See also: https://bugzilla.redhat.com/
1708300
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
20190815185024.7010-1-eblake@redhat.com>
[eblake: tweak blockdev-nbd.c to not request shared when writable,
fix iotest 233]
Reviewed-by: John Snow <jsnow@redhat.com>
Peter Maydell [Thu, 5 Sep 2019 16:09:13 +0000 (17:09 +0100)]
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2019-09-05-v2' into staging
- Make the core libqtest library independent from global_qtest
- Clean up docs from hard-coded qemu-system-* names
- Install libattr-dev and libcap-dev in gitlab-ci to test virtio-9p
# gpg: Signature made Thu 05 Sep 2019 15:52:30 BST
# gpg: using RSA key
27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2019-09-05-v2:
gitlab-ci.yml: Install libattr-devel and libcap-devel to test virtio-9p
qemu-doc: Do not hard-code the name of the QEMU binary
tests/vm: Take the J=x setting into account for the vm-boot-ssh targets, too
tests/libqtest: Use libqtest-single.h in tests that require global_qtest
tests/libqtest: Move global_test wrapper function into a separate header
tests: Remove unnecessary global_qtest references
tests/libqos: Replace clock_step with qtest_clock_step in virtio code
tests/libqos/e1000e: Make e1000e libqos functions independent from global_qtest
tests/migration: Do not use functions anymore that rely on global_qtest
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 5 Sep 2019 15:33:39 +0000 (16:33 +0100)]
Merge remote-tracking branch 'remotes/berrange/tags/docs-pull-request' into staging
docs: add docs about use of automatic cleanup functions
This is ostensibly about adding docs for the g_autofree/g_autoptr
macros. As part of doing that, however, the existing HACKING doc
is merged into the CODING_STYLE doc and the text is converted to
rst with a table of contents.
# gpg: Signature made Thu 05 Sep 2019 14:43:44 BST
# gpg: using RSA key
DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/docs-pull-request:
docs: split the CODING_STYLE doc into distinct groups
docs: document use of automatic cleanup functions in glib
docs: merge HACKING.rst contents into CODING_STYLE.rst
docs: convert README, CODING_STYLE and HACKING to RST syntax
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Thomas Huth [Thu, 5 Sep 2019 10:36:50 +0000 (12:36 +0200)]
gitlab-ci.yml: Install libattr-devel and libcap-devel to test virtio-9p
So far the gitlab-ci was not testing virtio-9p yet, since we did not
install libattr-devel and libcap-devel in any of the pipelines. Do
it now to get some more test coverage.
Message-Id: <
20190905111729.1197-1-thuth@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Daniel P. Berrangé [Thu, 29 Aug 2019 16:04:32 +0000 (17:04 +0100)]
docs: split the CODING_STYLE doc into distinct groups
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Daniel P. Berrangé [Fri, 23 Aug 2019 16:31:35 +0000 (17:31 +0100)]
docs: document use of automatic cleanup functions in glib
Document the use of g_autofree and g_autoptr in glib for automatic
freeing of memory.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Daniel P. Berrangé [Fri, 23 Aug 2019 16:12:05 +0000 (17:12 +0100)]
docs: merge HACKING.rst contents into CODING_STYLE.rst
The split of information between the two docs is rather arbitary and
unclear. It is simpler for contributors if all the information is in
one file.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Daniel P. Berrangé [Fri, 23 Aug 2019 16:09:24 +0000 (17:09 +0100)]
docs: convert README, CODING_STYLE and HACKING to RST syntax
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Richard Henderson [Wed, 4 Sep 2019 19:30:59 +0000 (12:30 -0700)]
target/arm: Inline gen_bx_im into callers
There are only two remaining uses of gen_bx_im. In each case, we
know the destination mode -- not changing in the case of gen_jmp
or changing in the case of trans_BLX_i. Use this to simplify the
surrounding code.
For trans_BLX_i, use gen_jmp for the actual branch. For gen_jmp,
use gen_set_pc_im to set up the single-step.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-70-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:58 +0000 (12:30 -0700)]
target/arm: Clean up disas_thumb_insn
Now that everything is converted, remove the rest of
the legacy decode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-69-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:57 +0000 (12:30 -0700)]
target/arm: Convert T16, long branches
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-68-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:56 +0000 (12:30 -0700)]
target/arm: Convert T16, Unconditional branch
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-67-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:55 +0000 (12:30 -0700)]
target/arm: Convert T16, load (literal)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-66-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:54 +0000 (12:30 -0700)]
target/arm: Convert T16, shift immediate
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-65-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:53 +0000 (12:30 -0700)]
target/arm: Convert T16, Miscellaneous 16-bit instructions
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-64-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:52 +0000 (12:30 -0700)]
target/arm: Convert T16, Conditional branches, Supervisor call
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-63-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:51 +0000 (12:30 -0700)]
target/arm: Convert T16, push and pop
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-62-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:50 +0000 (12:30 -0700)]
target/arm: Split gen_nop_hint
Now that all callers pass a constant value, split the switch
statement into the individual trans_* functions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id:
20190904193059.26202-61-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:49 +0000 (12:30 -0700)]
target/arm: Convert T16, nop hints
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id:
20190904193059.26202-60-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:48 +0000 (12:30 -0700)]
target/arm: Convert T16, Reverse bytes
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-59-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:47 +0000 (12:30 -0700)]
target/arm: Convert T16, Change processor state
Add a check for ARMv6 in trans_CPS. We had this correct in
the T16 path, but had previously forgotten the check on the
A32 and T32 paths.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-58-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:46 +0000 (12:30 -0700)]
target/arm: Convert T16, extract
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-57-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:45 +0000 (12:30 -0700)]
target/arm: Convert T16 adjust sp (immediate)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-56-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:44 +0000 (12:30 -0700)]
target/arm: Convert T16 add, compare, move (two high registers)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-55-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:43 +0000 (12:30 -0700)]
target/arm: Convert T16 branch and exchange
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-54-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:42 +0000 (12:30 -0700)]
target/arm: Convert T16 one low register and immediate
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-53-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:41 +0000 (12:30 -0700)]
target/arm: Convert T16 add/sub (3 low, 2 low and imm)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-52-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:40 +0000 (12:30 -0700)]
target/arm: Convert T16 load/store multiple
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-51-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:39 +0000 (12:30 -0700)]
target/arm: Convert T16 add pc/sp (immediate)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-50-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:38 +0000 (12:30 -0700)]
target/arm: Convert T16 load/store (immediate offset)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-49-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:37 +0000 (12:30 -0700)]
target/arm: Convert T16 load/store (register offset)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-48-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:36 +0000 (12:30 -0700)]
target/arm: Convert T16 data-processing (two low regs)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-47-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:35 +0000 (12:30 -0700)]
target/arm: Add skeleton for T16 decodetree
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-46-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:34 +0000 (12:30 -0700)]
target/arm: Simplify disas_arm_insn
Fold away all of the cases that now just goto illegal_op,
because all of their internal bits are now in decodetree.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-45-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 4 Sep 2019 19:30:33 +0000 (12:30 -0700)]
target/arm: Simplify disas_thumb2_insn
Fold away all of the cases that now just goto illegal_op,
because all of their internal bits are now in decodetree.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190904193059.26202-44-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>