s390/qeth: remove check for packing mode in qeth_check_outbound_queue()

If qeth_check_outbound_queue() finds a partially filled TX buffer on
the queue and flushes it, then the queue _must_ have been in packing
mode.

Remove the redundant check when updating the relevant statistics.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

s390/qeth: fine-tune .ndo_select_queue()

Avoid a conditional branch for L2 devices when selecting the TX queue,
and have shared logic for OSA devices.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

s390/qeth: don't offer .ndo_bridge_* ops for OSA devices

qeth_l2_detect_dev2br_support() will only set brport_hw_features for IQD
devices. So qeth_l2_bridge_getlink() and qeth_l2_bridge_setlink() will
always return -EOPNOTSUPP on OSA devices. Just don't offer these
callbacks instead.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

s390/qeth: split up L2 netdev_ops

Splitting up the netdev_ops allows for fine-tuning some of the ndo's
in subsequent patches.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

s390/qeth: simplify qeth_receive_skb()

Now that the OSN code is gone, we don't need the second switch statement
in the RX path. And getting rid of its (unreachable) default case is a
nice simplification.

Also don't pass in the full HW header, all we still need is a flag to
indicate whether the skb can use CSO. This we can already obtain during
the first peek at the HW header.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

hv_sock: Extract hvs_send_data() helper that takes only header

When building under -Warray-bounds, the compiler is especially
conservative when faced with casts from a smaller object to a larger
object. While this has found many real bugs, there are some cases that
are currently false positives (like here). With this as one of the last
few instances of the warning in the kernel before -Warray-bounds can be
enabled globally, rearrange the functions so that there is a header-only
version of hvs_send_data(). Silences this warning:

net/vmw_vsock/hyperv_transport.c: In function 'hvs_shutdown_lock_held.constprop':
net/vmw_vsock/hyperv_transport.c:231:32: warning: array subscript 'struct hvs_send_buf[0]' is partly outside array bounds of 'struct vmpipe_proto_header[1]' [-Warray-bounds]
  231 |         send_buf->hdr.pkt_type = 1;
      |         ~~~~~~~~~~~~~~~~~~~~~~~^~~
net/vmw_vsock/hyperv_transport.c:465:36: note: while referencing 'hdr'
  465 |         struct vmpipe_proto_header hdr;
      |                                    ^~~

This change results in no executable instruction differences.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20211207063217.2591451-1-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: felix: use kmemdup() to replace kmalloc + memcpy

Fix following coccicheck warning:
/drivers/net/dsa/ocelot/felix_vsc9959.c:1627:13-20:
WARNING opportunity for kmemdup
/drivers/net/dsa/ocelot/felix_vsc9959.c:1506:16-23:
WARNING opportunity for kmemdup

Signed-off-by: Yihao Han <hanyihao@vivo.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211207064419.38632-1-hanyihao@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'prepare-ocelot-for-external-interface-control'

Colin Foster says:

====================
prepare ocelot for external interface control

This patch set is derived from an attempt to include external control
for a VSC751[1234] chip via SPI. That patch set has grown large and is
getting unwieldy for reviewers and the developers... me.

I'm breaking out the changes from that patch set. Some are trivial
  net: dsa: ocelot: remove unnecessary pci_bar variables
  net: dsa: ocelot: felix: Remove requirement for PCS in felix devices

some are required for SPI
  net: dsa: ocelot: felix: add interface for custom regmaps

and some are just to expose code to be shared
  net: mscc: ocelot: split register definitions to a separate file

The entirety of this patch set should have essentially no impact on the
system performance.
====================

Link: https://lore.kernel.org/r/20211207170030.1406601-1-colin.foster@in-advantage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mscc: ocelot: split register definitions to a separate file

Move these to a separate file will allow them to be shared to other
drivers.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: ocelot: felix: add interface for custom regmaps

Add an interface so that non-mmio regmaps can be used

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: ocelot: felix: Remove requirement for PCS in felix devices

Existing felix devices all have an initialized pcs array. Future devices
might not, so running a NULL check on the array before dereferencing it
will allow those future drivers to not crash at this point

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: ocelot: remove unnecessary pci_bar variables

The pci_bar variables for the switch and imdio don't make sense for the
generic felix driver. Moving them to felix_vsc9959 to limit scope and
simplify the felix_info struct.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hns3: Fix spelling mistake "faile" -> "failed"

There is a spelling mistake in a dev_err message. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211206091207.113648-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-drivers-next-2021-12-07' of git://git./linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.17

First set of patches for v5.17. The biggest change is the iwlmei
driver for Intel's AMT devices. Also now WCN6855 support in ath11k
should be usable.

Major changes:

ath10k
 * fetch (pre-)calibration data via nvmem subsystem

ath11k
 * enable 802.11 power save mode in station mode for qca6390 and wcn6855
 * trace log support
 * proper board file detection for WCN6855 based on PCI ids
 * BSS color change support

rtw88
 * add debugfs file to force lowest basic rate
 * add quirk to disable PCI ASPM on HP 250 G7 Notebook PC

mwifiex
 * add quirk to disable deep sleep with certain hardware revision in
  Surface Book 2 devices

iwlwifi
 * add iwlmei driver for co-operating with Intel's Active Management
   Technology (AMT) devices

* tag 'wireless-drivers-next-2021-12-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (87 commits)
  iwlwifi: mei: fix linking when tracing is not enabled
  rtlwifi: rtl8192de: Style clean-ups
  mwl8k: Use named struct for memcpy() region
  intersil: Use struct_group() for memcpy() region
  libertas_tf: Use struct_group() for memcpy() region
  libertas: Use struct_group() for memcpy() region
  wlcore: no need to initialise statics to false
  rsi: Fix out-of-bounds read in rsi_read_pkt()
  rsi: Fix use-after-free in rsi_rx_done_handler()
  brcmfmac: Configure keep-alive packet on suspend
  wilc1000: remove '-Wunused-but-set-variable' warning in chip_wakeup()
  iwlwifi: mvm: read the rfkill state and feed it to iwlmei
  iwlwifi: mvm: add vendor commands needed for iwlmei
  iwlwifi: integrate with iwlmei
  iwlwifi: mei: add debugfs hooks
  iwlwifi: mei: add the driver to allow cooperation with CSME
  mei: bus: add client dma interface
  mwifiex: Ignore BTCOEX events from the 88W8897 firmware
  mwifiex: Ensure the version string from the firmware is 0-terminated
  mwifiex: Add quirk to disable deep sleep with certain hardware revision
  ...
====================

Link: https://lore.kernel.org/r/20211207144211.A9949C341C1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-second-round-of-netdevice-refcount-tracking'

Eric Dumazet says:

====================
net: second round of netdevice refcount tracking

The most interesting part of this series is probably
("inet: add net device refcount tracker to struct fib_nh_common")
but only future reports will confirm this guess.
====================

Link: https://lore.kernel.org/r/20211207013039.1868645-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: sched: act_mirred: add net device refcount tracker

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

openvswitch: add net device refcount tracker to struct vport

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netlink: add net device refcount tracker to struct ethnl_req_info

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/smc: add net device tracker to struct smc_pnetentry

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

pktgen add net device refcount tracker

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

llc: add net device refcount tracker

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ax25: add net device refcount tracker

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

inet: add net device refcount tracker to struct fib_nh_common

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: switchdev: add net device refcount tracker

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: watchdog: add net device refcount tracker

Add a netdevice_tracker inside struct net_device, to track
the self reference when a device has an active watchdog timer.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: bridge: add net device refcount tracker

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

vlan: add net device refcount tracker

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: eql: add net device refcount tracker

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mptcp-new-features-for-mptcp-sockets-and-netlink-pm'

Mat Martineau says:

====================
mptcp: New features for MPTCP sockets and netlink PM

This collection of patches adds MPTCP socket support for a few socket
options, ioctls, and one ancillary data type (specifics for each are
listed below). There's also a patch modifying the netlink MPTCP path
manager API to allow setting the backup flag on a configured interface
using the endpoint ID instead of the full IP address.

Patches 1 & 2: TCP_INQ cmsg and selftests.

Patches 2 & 3: SIOCINQ, OUTQ, and OUTQNSD ioctls and selftests.

Patch 5: Change backup flag using endpoint ID.

Patches 6 & 7: IP_TOS socket option and selftests.

Patches 8-10: TCP_CORK and TCP_NODELAY socket options. Includes a tcp
change to expose __tcp_sock_set_cork() and __tcp_sock_set_nodelay() for
use by MPTCP.
====================

Link: https://lore.kernel.org/r/20211203223541.69364-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: support TCP_CORK and TCP_NODELAY

First, add cork and nodelay fields to the mptcp_sock structure
so they can be used in sync_socket_options(), and fill them on setsockopt
while holding the msk socket lock.

Then, on setsockopt set proper tcp_sk(ssk)->nonagle values for subflows
by calling __tcp_sock_set_cork() or __tcp_sock_set_nodelay() on the ssk
while holding the ssk socket lock.

tcp_push_pending_frames() will be invoked on the ssk if a cork was cleared
or nodelay was set. Also set MPTCP_PUSH_PENDING bit by calling
mptcp_check_and_set_pending(). This will lead to __mptcp_push_pending()
being called inside mptcp_release_cb() with new tcp_sk(ssk)->nonagle.

Also add getsockopt support for TCP_CORK and TCP_NODELAY.

Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Maxim Galaganov <max@internet.ru>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: expose mptcp_check_and_set_pending

Expose the mptcp_check_and_set_pending() function for use inside MPTCP
sockopt code. The next patch will call it when TCP_CORK is cleared or
TCP_NODELAY is set on the MPTCP socket in order to push pending data
from mptcp_release_cb().

Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Maxim Galaganov <max@internet.ru>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: expose __tcp_sock_set_cork and __tcp_sock_set_nodelay

Expose __tcp_sock_set_cork() and __tcp_sock_set_nodelay() for use in
MPTCP setsockopt code -- namely for syncing MPTCP socket options with
subflows inside sync_socket_options() while already holding the subflow
socket lock.

Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Maxim Galaganov <max@internet.ru>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: check IP_TOS in/out are the same

Check that getsockopt(IP_TOS) returns what setsockopt(IP_TOS) did set
right before.

Also check that socklen_t == 0 and -1 input values match those
of normal tcp sockets.

Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: getsockopt: add support for IP_TOS

earlier patch added IP_TOS setsockopt support, this allows to get
the value set by earlier setsockopt.

Extends mptcp_put_int_option to handle u8 input/output by
adding required cast.

Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: allow changing the "backup" bit by endpoint id

a non-zero 'id' is sufficient to identify MPTCP endpoints: allow changing
the value of 'backup' bit by simply specifying the endpoint id.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/158
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: add inq test case

client & server use a unix socket connection to communicate
outside of the mptcp connection.

This allows the consumer to know in advance how many bytes have been
(or will be) sent by the peer.
This allows stricter checks on the bytecounts reported by TCP_INQ cmsg.

Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: add SIOCINQ, OUTQ and OUTQNSD ioctls

Allows to query in-sequence data ready for read(), total bytes in
write queue and total bytes in write queue that have not yet been sent.

v2: remove unneeded READ_ONCE() (Paolo Abeni)
v3: check for new data unconditionally in SIOCINQ ioctl (Mat Martineau)

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: add TCP_INQ support

Do checks on the returned inq counter.

Fail on:
1. Huge value (> 1 kbyte, test case files are 1 kb)
2. last hint larger than returned bytes when read was short
3. erronenous indication of EOF.

3) happens when a hint of X bytes reads X-1 on next call
   but next recvmsg returns more data (instead of EOF).

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: add TCP_INQ cmsg support

Support the TCP_INQ setsockopt.

This is a boolean that tells recvmsg path to include the remaining
in-sequence bytes in the cmsg data.

v2: do not use CB(skb)->offset, increment map_seq instead (Paolo Abeni)
v3: adjust CB(skb)->map_seq when taking skb from ofo queue (Paolo Abeni)

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/224
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

vrf: use dev_replace_track() for better tracking

vrf_rt6_release() and vrf_rtable_release() changes dst->dev

Instead of

dev_hold(ndev);
dev_put(odev);

We should use

dev_replace_track(odev, ndev, &dst->dev_tracker, GFP_KERNEL);

If we do not transfer dst->dev_tracker to the new device,
we will get warnings from ref_tracker_dir_exit() when odev
is finally dismantled.

Fixes: 9038c320001d ("net: dst: add net device refcount tracking to dst_entry")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211207055603.1926372-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/smc: Clear memory when release and reuse buffer

Currently, buffers are cleared when smc connections are created and
buffers are reused. This slows down the speed of establishing new
connections. In most cases, the applications want to establish
connections as quickly as possible.

This patch moves memset() from connection creation path to release and
buffer unuse path, this trades off between speed of establishing and
release.

Test environments:
- CPU Intel Xeon Platinum 8 core, mem 32 GiB, nic Mellanox CX4
- socket sndbuf / rcvbuf: 16384 / 131072 bytes
- w/o first round, 5 rounds, avg, 100 conns batch per round
- smc_buf_create() use bpftrace kprobe, introduces extra latency

Latency benchmarks for smc_buf_create():
  w/o patch : 19040.0 ns
  w/  patch :  1932.6 ns
  ratio :        10.2% (-89.8%)

Latency benchmarks for socket create and connect:
  w/o patch :   143.3 us
  w/  patch :   102.2 us
  ratio :        71.3% (-28.7%)

The latency of establishing connections is reduced by 28.7%.

Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20211203113331.2818873-1-kgraul@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Revert "net: hns3: add void before function which don't receive ret"

This reverts commit 5ac4f180bd07116c1e57858bc3f6741adbca3eb6.

Sorry for taking no notice that the function devlink_register() has been
already declared as void, so it is needs to revert this patch.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Link: https://lore.kernel.org/r/20211204012448.51360-1-huangguangbin2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: prestera: replace zero-length array with flexible-array member

One-element and zero-length arrays are deprecated and should be
replaced with flexible-array members:
https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays

Replace zero-length array with flexible-array member and make use
of the struct_size() helper.

Link: https://github.com/KSPP/linux/issues/78
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Tested-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20211204171349.22776-1-jose.exposito89@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: wwan: iosm: select CONFIG_RELAY

The iosm driver started using relayfs, but is missing the Kconfig
logic to ensure it's built into the kernel:

x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_create_buf_file_handler':
iosm_ipc_trace.c:(.text+0x16): undefined reference to `relay_file_operations'
x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_subbuf_start_handler':
iosm_ipc_trace.c:(.text+0x31): undefined reference to `relay_buf_full'
x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_ctrl_file_write':
iosm_ipc_trace.c:(.text+0xd5): undefined reference to `relay_flush'
x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_port_rx':

Fixes: 00ef32565b9b ("net: wwan: iosm: device trace collection using relayfs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Link: https://lore.kernel.org/r/20211204174033.950528-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: fix recent csum changes

Vladimir reported csum issues after my recent change in skb_postpull_rcsum()

Issue here is the following:

initial skb->csum is the csum of

[part to be pulled][rest of packet]

Old code:
 skb->csum = csum_sub(skb->csum, csum_partial(pull, pull_length, 0));

New code:
 skb->csum = ~csum_partial(pull, pull_length, ~skb->csum);

This is broken if the csum of [pulled part]
happens to be equal to skb->csum, because end
result of skb->csum is 0 in new code, instead
of being 0xffffffff

David Laight suggested to use

skb->csum = -csum_partial(pull, pull_length, -skb->csum);

I based my patches on existing code present in include/net/seg6.h,
update_csum_diff4() and update_csum_diff16() which might need
a similar fix.

I guess that my tests, mostly pulling 40 bytes of IPv6 header
were not providing enough entropy to hit this bug.

v2: added wsum_negate() to make sparse happy.

Fixes: 29c3002644bd ("net: optimize skb_postpull_rcsum()")
Fixes: 0bd28476f636 ("gro: optimize skb_gro_postpull_rcsum()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Cc: David Lebrun <dlebrun@google.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211204045356.3659278-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-add-preliminary-netdev-refcount-tracking'

Eric Dumazet says:

====================
net: add preliminary netdev refcount tracking

Two first patches add a generic infrastructure, that will be used
to get tracking of refcount increments/decrements.

The general idea is to be able to precisely pair each decrement with
a corresponding prior increment. Both share a cookie, basically
a pointer to private data storing stack traces.

The third patch adds dev_hold_track() and dev_put_track() helpers
(CONFIG_NET_DEV_REFCNT_TRACKER)

Then a series of 20 patches converts some dev_hold()/dev_put()
pairs to new hepers : dev_hold_track() and dev_put_track().

Hopefully this will be used by developpers and syzbot to
root cause bugs that cause netdevice dismantles freezes.

With CONFIG_PCPU_DEV_REFCNT=n option, we were able to detect
some class of bugs, but too late (when too many dev_put()
were happening).

Another series will be sent after this one is merged.

v3: moved NET_DEV_REFCNT_TRACKER to net/Kconfig.debug
    added "depends on DEBUG_KERNEL && STACKTRACE_SUPPORT"
    to hopefully get rid of kbuild reports for ARCH=nios2
    Reworded patch 3 changelog.
    Added missing htmldocs (Jakub)

v2: added four additional patches,
    added netdev_tracker_alloc() and netdev_tracker_free()
    addressed build error (kernel bots),
    use GFP_ATOMIC in test_ref_tracker_timer_func()
====================

Link: https://lore.kernel.org/r/20211205042217.982127-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netpoll: add net device refcount tracker to struct netpoll

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipmr, ip6mr: add net device refcount tracker to struct vif_device

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: failover: add net device refcount tracker

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: linkwatch: add net device refcount tracker

Add a netdevice_tracker inside struct net_device, to track
the self reference when a device is in lweventlist.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: add net device refcount tracker to struct Qdisc

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv4: add net device refcount tracker to struct in_device

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: add net device refcount tracker to struct inet6_dev

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: add net device refcount tracker to struct netdev_adjacent

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: add net device refcount tracker to struct neigh_parms

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: add net device refcount tracker to struct pneigh_entry

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: add net device refcount tracker to struct neighbour

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: add net device refcount tracker to struct ip6_tnl

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sit: add net device refcount tracking to ip_tunnel

Note that other ip_tunnel users do not seem to hold a reference
on tunnel->dev. Probably needs some investigations.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: add net device refcount tracker to rt6_probe_deferred()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dst: add net device refcount tracking to dst_entry

We want to track all dev_hold()/dev_put() to ease leak hunting.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drop_monitor: add net device refcount tracker

We want to track all dev_hold()/dev_put() to ease leak hunting.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: add net device refcount tracker to dev_ifsioc()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: add net device refcount tracker to ethtool_phys_id()

This helper might hold a netdev reference for a long time,
lets add reference tracking.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: add net device refcount tracker to struct netdev_queue

This will help debugging pesky netdev reference leaks.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: add net device refcount tracker to struct netdev_rx_queue

This helps debugging net device refcount leaks.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: add net device refcount tracker infrastructure

net device are refcounted. Over the years we had numerous bugs
caused by imbalanced dev_hold() and dev_put() calls.

The general idea is to be able to precisely pair each decrement with
a corresponding prior increment. Both share a cookie, basically
a pointer to private data storing stack traces.

This patch adds dev_hold_track() and dev_put_track().

To use these helpers, each data structure owning a refcount
should also use a "netdevice_tracker" to pair the hold and put.

netdevice_tracker dev_tracker;
...
dev_hold_track(dev, &dev_tracker, GFP_ATOMIC);
...
dev_put_track(dev, &dev_tracker);

Whenever a leak happens, we will get precise stack traces
of the point dev_hold_track() happened, at device dismantle phase.

We will also get a stack trace if too many dev_put_track() for the same
netdevice_tracker are attempted.

This is guarded by CONFIG_NET_DEV_REFCNT_TRACKER option.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

lib: add tests for reference tracker

This module uses reference tracker, forcing two issues.

1) Double free of a tracker

2) leak of two trackers, one being allocated from softirq context.

"modprobe test_ref_tracker" would emit the following traces.
(Use scripts/decode_stacktrace.sh if necessary)

[  171.648681] reference already released.
[  171.653213] allocated in:
[  171.656523]  alloctest_ref_tracker_alloc2+0x1c/0x20 [test_ref_tracker]
[  171.656526]  init_module+0x86/0x1000 [test_ref_tracker]
[  171.656528]  do_one_initcall+0x9c/0x220
[  171.656532]  do_init_module+0x60/0x240
[  171.656536]  load_module+0x32b5/0x3610
[  171.656538]  __do_sys_init_module+0x148/0x1a0
[  171.656540]  __x64_sys_init_module+0x1d/0x20
[  171.656542]  do_syscall_64+0x4a/0xb0
[  171.656546]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  171.656549] freed in:
[  171.659520]  alloctest_ref_tracker_free+0x13/0x20 [test_ref_tracker]
[  171.659522]  init_module+0xec/0x1000 [test_ref_tracker]
[  171.659523]  do_one_initcall+0x9c/0x220
[  171.659525]  do_init_module+0x60/0x240
[  171.659527]  load_module+0x32b5/0x3610
[  171.659529]  __do_sys_init_module+0x148/0x1a0
[  171.659532]  __x64_sys_init_module+0x1d/0x20
[  171.659534]  do_syscall_64+0x4a/0xb0
[  171.659536]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  171.659575] ------------[ cut here ]------------
[  171.659576] WARNING: CPU: 5 PID: 13016 at lib/ref_tracker.c:112 ref_tracker_free+0x224/0x270
[  171.659581] Modules linked in: test_ref_tracker(+)
[  171.659591] CPU: 5 PID: 13016 Comm: modprobe Tainted: G S                5.16.0-smp-DEV #290
[  171.659595] RIP: 0010:ref_tracker_free+0x224/0x270
[  171.659599] Code: 5e 41 5f 5d c3 48 c7 c7 04 9c 74 a6 31 c0 e8 62 ee 67 00 83 7b 14 00 75 1a 83 7b 18 00 75 30 4c 89 ff 4c 89 f6 e8 9c 00 69 00 <0f> 0b bb ea ff ff ff eb ae 48 c7 c7 3a 0a 77 a6 31 c0 e8 34 ee 67
[  171.659601] RSP: 0018:ffff89058ba0bbd0 EFLAGS: 00010286
[  171.659603] RAX: 0000000000000029 RBX: ffff890586b19780 RCX: 08895bff57c7d100
[  171.659604] RDX: c0000000ffff7fff RSI: 0000000000000282 RDI: ffffffffc0407000
[  171.659606] RBP: ffff89058ba0bc88 R08: 0000000000000000 R09: ffffffffa6f342e0
[  171.659607] R10: 00000000ffff7fff R11: 0000000000000000 R12: 000000008f000000
[  171.659608] R13: 0000000000000014 R14: 0000000000000282 R15: ffffffffc0407000
[  171.659609] FS:  00007f97ea29d740(0000) GS:ffff8923ff940000(0000) knlGS:0000000000000000
[  171.659611] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  171.659613] CR2: 00007f97ea299000 CR3: 0000000186b4a004 CR4: 00000000001706e0
[  171.659614] Call Trace:
[  171.659615]  <TASK>
[  171.659631]  ? alloctest_ref_tracker_free+0x13/0x20 [test_ref_tracker]
[  171.659633]  ? init_module+0x105/0x1000 [test_ref_tracker]
[  171.659636]  ? do_one_initcall+0x9c/0x220
[  171.659638]  ? do_init_module+0x60/0x240
[  171.659641]  ? load_module+0x32b5/0x3610
[  171.659644]  ? __do_sys_init_module+0x148/0x1a0
[  171.659646]  ? __x64_sys_init_module+0x1d/0x20
[  171.659649]  ? do_syscall_64+0x4a/0xb0
[  171.659652]  ? entry_SYSCALL_64_after_hwframe+0x44/0xae
[  171.659656]  ? 0xffffffffc040a000
[  171.659658]  alloctest_ref_tracker_free+0x13/0x20 [test_ref_tracker]
[  171.659660]  init_module+0x105/0x1000 [test_ref_tracker]
[  171.659663]  do_one_initcall+0x9c/0x220
[  171.659666]  do_init_module+0x60/0x240
[  171.659669]  load_module+0x32b5/0x3610
[  171.659672]  __do_sys_init_module+0x148/0x1a0
[  171.659676]  __x64_sys_init_module+0x1d/0x20
[  171.659678]  do_syscall_64+0x4a/0xb0
[  171.659694]  ? exc_page_fault+0x6e/0x140
[  171.659696]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  171.659698] RIP: 0033:0x7f97ea3dbe7a
[  171.659700] Code: 48 8b 0d 61 8d 06 00 f7 d8 64 89 01 48 83 c8 ff c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2e 8d 06 00 f7 d8 64 89 01 48
[  171.659701] RSP: 002b:00007ffea67ce608 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
[  171.659703] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f97ea3dbe7a
[  171.659704] RDX: 00000000013a0ba0 RSI: 0000000000002808 RDI: 00007f97ea299000
[  171.659705] RBP: 00007ffea67ce670 R08: 0000000000000003 R09: 0000000000000000
[  171.659706] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000013a1048
[  171.659707] R13: 00000000013a0ba0 R14: 0000000001399930 R15: 00000000013a1030
[  171.659709]  </TASK>
[  171.659710] ---[ end trace f5dbd6afa41e60a9 ]---
[  171.659712] leaked reference.
[  171.663393]  alloctest_ref_tracker_alloc0+0x1c/0x20 [test_ref_tracker]
[  171.663395]  test_ref_tracker_timer_func+0x9/0x20 [test_ref_tracker]
[  171.663397]  call_timer_fn+0x31/0x140
[  171.663401]  expire_timers+0x46/0x110
[  171.663403]  __run_timers+0x16f/0x1b0
[  171.663404]  run_timer_softirq+0x1d/0x40
[  171.663406]  __do_softirq+0x148/0x2d3
[  171.663408] leaked reference.
[  171.667101]  alloctest_ref_tracker_alloc1+0x1c/0x20 [test_ref_tracker]
[  171.667103]  init_module+0x81/0x1000 [test_ref_tracker]
[  171.667104]  do_one_initcall+0x9c/0x220
[  171.667106]  do_init_module+0x60/0x240
[  171.667108]  load_module+0x32b5/0x3610
[  171.667111]  __do_sys_init_module+0x148/0x1a0
[  171.667113]  __x64_sys_init_module+0x1d/0x20
[  171.667115]  do_syscall_64+0x4a/0xb0
[  171.667117]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  171.667131] ------------[ cut here ]------------
[  171.667132] WARNING: CPU: 5 PID: 13016 at lib/ref_tracker.c:30 ref_tracker_dir_exit+0x104/0x130
[  171.667136] Modules linked in: test_ref_tracker(+)
[  171.667144] CPU: 5 PID: 13016 Comm: modprobe Tainted: G S      W         5.16.0-smp-DEV #290
[  171.667147] RIP: 0010:ref_tracker_dir_exit+0x104/0x130
[  171.667150] Code: 01 00 00 00 00 ad de 48 89 03 4c 89 63 08 48 89 df e8 20 a0 d5 ff 4c 89 f3 4d 39 ee 75 a8 4c 89 ff 48 8b 75 d0 e8 7c 05 69 00 <0f> 0b eb 0c 4c 89 ff 48 8b 75 d0 e8 6c 05 69 00 41 8b 47 08 83 f8
[  171.667151] RSP: 0018:ffff89058ba0bc68 EFLAGS: 00010286
[  171.667154] RAX: 08895bff57c7d100 RBX: ffffffffc0407010 RCX: 000000000000003b
[  171.667156] RDX: 000000000000003c RSI: 0000000000000282 RDI: ffffffffc0407000
[  171.667157] RBP: ffff89058ba0bc98 R08: 0000000000000000 R09: ffffffffa6f342e0
[  171.667159] R10: 00000000ffff7fff R11: 0000000000000000 R12: dead000000000122
[  171.667160] R13: ffffffffc0407010 R14: ffffffffc0407010 R15: ffffffffc0407000
[  171.667162] FS:  00007f97ea29d740(0000) GS:ffff8923ff940000(0000) knlGS:0000000000000000
[  171.667164] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  171.667166] CR2: 00007f97ea299000 CR3: 0000000186b4a004 CR4: 00000000001706e0
[  171.667169] Call Trace:
[  171.667170]  <TASK>
[  171.667171]  ? 0xffffffffc040a000
[  171.667173]  init_module+0x126/0x1000 [test_ref_tracker]
[  171.667175]  do_one_initcall+0x9c/0x220
[  171.667179]  do_init_module+0x60/0x240
[  171.667182]  load_module+0x32b5/0x3610
[  171.667186]  __do_sys_init_module+0x148/0x1a0
[  171.667189]  __x64_sys_init_module+0x1d/0x20
[  171.667192]  do_syscall_64+0x4a/0xb0
[  171.667194]  ? exc_page_fault+0x6e/0x140
[  171.667196]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  171.667199] RIP: 0033:0x7f97ea3dbe7a
[  171.667200] Code: 48 8b 0d 61 8d 06 00 f7 d8 64 89 01 48 83 c8 ff c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2e 8d 06 00 f7 d8 64 89 01 48
[  171.667201] RSP: 002b:00007ffea67ce608 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
[  171.667203] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f97ea3dbe7a
[  171.667204] RDX: 00000000013a0ba0 RSI: 0000000000002808 RDI: 00007f97ea299000
[  171.667205] RBP: 00007ffea67ce670 R08: 0000000000000003 R09: 0000000000000000
[  171.667206] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000013a1048
[  171.667207] R13: 00000000013a0ba0 R14: 0000000001399930 R15: 00000000013a1030
[  171.667209]  </TASK>
[  171.667210] ---[ end trace f5dbd6afa41e60aa ]---

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

lib: add reference counting tracking infrastructure

It can be hard to track where references are taken and released.

In networking, we have annoying issues at device or netns dismantles,
and we had various proposals to ease root causing them.

This patch adds new infrastructure pairing refcount increases
and decreases. This will self document code, because programmers
will have to associate increments/decrements.

This is controled by CONFIG_REF_TRACKER which can be selected
by users of this feature.

This adds both cpu and memory costs, and thus should probably be
used with care.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

iwlwifi: mei: fix linking when tracing is not enabled

I forgot to add stubs in case tracing is disabled which caused linking errors:

ERROR: modpost: "__SCT__tp_func_iwlmei_sap_data" [drivers/net/wireless/intel/iwlwifi/mei/iwlmei.ko] undefined!
ERROR: modpost: "__SCT__tp_func_iwlmei_me_msg" [drivers/net/wireless/intel/iwlwifi/mei/iwlmei.ko] undefined!
ERROR: modpost: "__tracepoint_iwlmei_sap_cmd" [drivers/net/wireless/intel/iwlwifi/mei/iwlmei.ko] undefined!
ERROR: modpost: "__tracepoint_iwlmei_me_msg" [drivers/net/wireless/intel/iwlwifi/mei/iwlmei.ko] undefined!
ERROR: modpost: "__SCK__tp_func_iwlmei_me_msg" [drivers/net/wireless/intel/iwlwifi/mei/iwlmei.ko] undefined!
ERROR: modpost: "__SCK__tp_func_iwlmei_sap_data" [drivers/net/wireless/intel/iwlwifi/mei/iwlmei.ko] undefined!
ERROR: modpost: "__tracepoint_iwlmei_sap_data" [drivers/net/wireless/intel/iwlwifi/mei/iwlmei.ko] undefined!
ERROR: modpost: "__SCT__tp_func_iwlmei_sap_cmd" [drivers/net/wireless/intel/iwlwifi/mei/iwlmei.ko] undefined!
ERROR: modpost: "__SCK__tp_func_iwlmei_sap_cmd" [drivers/net/wireless/intel/iwlwifi/mei/iwlmei.ko] undefined!

Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211201113411.130409-1-emmanuel.grumbach@intel.com

Merge branch 'qed-enhancements'

Manish Chopra says:

====================
qed*: enhancements

This series adds below enhancements for qed/qede drivers

patch 1: Improves tx timeout debug data logs.
patch 2: Add ESL(Enhanced system lockdown) priv flag cap/status support.

v2:
* Fixed cosmetic issues in both patches
* Added ESL feature description in patch #2

Please consider applying it to "net-next"
====================

Link: https://lore.kernel.org/r/20211202210157.25530-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

qed*: esl priv flag support through ethtool

ESL(Enhanced System Lockdown) was designed to lock PCI adapter firmware
images and prevent changes to critical non-volatile configuration data
so that uncontrolled, malicious or unintentional modification to the
adapters are avoided, ensuring it's operational state. Once this feature is
enabled, the device is locked, rejecting any modification to non-volatile
images. Once unlocked, the protection is off such that firmware and
non-volatile configurations may be altered.

Driver just reflects the capability and status of this through
the ethtool private flag.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

qed*: enhance tx timeout debug info

This patch add some new qed APIs to query status block
info and report various data to MFW on tx timeout event

Along with that it enhances qede to dump more debug logs
(not just specific to the queue which was reported by stack)
on tx timeout which includes various other basic metadata about
all tx queues and other info (like status block etc.)

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: lan966x: fix a IS_ERR() vs NULL check in lan966x_create_targets()

The devm_ioremap() function does not return error pointers.  It returns
NULL.

Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: prestera: acl: fix return value check in prestera_acl_rule_entry_find()

rhashtable_lookup_fast() returns NULL pointer not ERR_PTR().
Return rhashtable_lookup_fast() directly to fix this.

Fixes: 47327e198d42 ("net: prestera: acl: migrate to new vTCAM api")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: vsc73xxx: Get rid of duplicate of_node assignment

GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove assignment here.

For the details one may look into the of_gpio_dev_init() implementation.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_ct: Offload only ASSURED connections

Short-lived connections increase the insertion rate requirements,
fill the offload table and provide very limited offload value since
they process a very small amount of packets. The ct ASSURED flag is
designed to filter short-lived connections for early expiration.

Offload connections when they are ESTABLISHED and ASSURED.

Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'hns3-cleanups'

Guangbin Huang says:

====================
net: hns3: some cleanups for -next

To improve code readability and simplicity, this series add some cleanup
patches for the HNS3 ethernet driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: fix hns3 driver header file not self-contained issue

The hns3 driver header file uses the structure of other files, but does
not include corresponding file, which causes a check warning that the
header file is not self-contained.

Therefore, the required header file is included in the header file, and
the structure declaration is added to the header file to avoid cyclic
dependency of the header file.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: replace one tab with space in for statement

Replace one tab with space between symbol ')' and '{' in for statement of
function hclge_map_tqp().

Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: remove rebundant line for hclge_dbg_dump_tm_pg()

Return value judgment should follow the function call, so remove line
between them.

Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: add comments for hclge_dbg_fill_content()

When we use hclge_dbg_fill_content() to fill contents with
specific format according to struct hclge_dbg_item *items,
it may cause content cover due to unreasonable items.

So add comments to explain how to avoid it.

Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: add void before function which don't receive ret

Add void before function which don't receive ret to improve code
readability.

Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: align return value type of atomic_read() with its output

Change output value type of atomic_read() from %u to %d.

Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: modify one argument type of function hclge_ncl_config_data_print

The argument len will not be changed in hclge_ncl_config_data_print(), it
is no need to declare as a pointer, so modify it into int type.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: Align type of some variables with their print type

The c language has a set of implicit type conversions, when
two variables perform bitwise or arithmetic operations.

For example, variable A (type u16/u8) -1, its output is int type variable.
u16/u8 will convert to int type implicitly before it does arithmetic
operations. So, change 1 to unsigned type.

Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: add print vport id for failed message of vlan

This patch adds print vport id when failed to get or set vlan
filter parameters.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: refactor function hclge_set_vlan_filter_hw

Function hclge_set_vlan_filter_hw() is a bit too long, so add a new
function hclge_need_update_port_vlan() to simplify code and improve
code readability.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: optimize function hclge_cfg_common_loopback()

hclge_cfg_common_loopback() is a bit too long, so
encapsulate hclge_cfg_common_loopback_cmd_send() and
hclge_cfg_common_loopback_wait() two functions to
improve readability.

Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mlx5-updates-2021-12-02' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2021-12-02

Misc updates to mlx5 driver

1) Various code cleanups
2) Error path handling fixes of latest features
3) Print more information on pci error handling
4) Dynamically resize flow counters query buffer
====================

Link: https://lore.kernel.org/r/20211203005622.183325-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: Dynamically resize flow counters query buffer

The flow counters bulk query buffer is allocated once during
mlx5_fc_init_stats(). For PFs and VFs this buffer usually takes a little
more than 512KB of memory, which is aligned to the next power of 2, to
1MB. For SFs, this buffer is reduced and takes around 128 Bytes.

The buffer size determines the maximum number of flow counters that
can be queried at a time. Thus, having a bigger buffer can improve
performance for users that need to query many flow counters.

There are cases that don't use many flow counters and don't need a big
buffer (e.g. SFs, VFs). Since this size is critical with large scale,
in these cases the buffer size should be reduced.

In order to reduce memory consumption while maintaining query
performance, change the query buffer's allocation scheme to the
following:
- First allocate the buffer with small initial size.
- If the number of counters surpasses the initial size, resize the
  buffer to the maximum size.

The buffer only grows and isn't shrank, because users with many flow
counters don't care about the buffer size and we don't want to add
resize overhead if the current number of counters drops.

This solution is preferable to the current one, which is less accurate
and only addresses SFs.

Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: TC, Set flow attr ip_version earlier

Setting flow attr ip_version is not related to parsing tc flow actions.
It needs to be set after parsing flower matches which changes the spec.
So move it outside parse_tc_fdb_actions() and set it in
__mlx5e_add_fdb_flow().

Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: TC, Move common flow_action checks into function

Remove duplicate checks on flow_action by using common function.

Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Remove redundant actions arg from vlan push/pop funcs

Passing actions is redundant and can be retrieved from flow attr.

Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Remove redundant actions arg from validate_goto_chain()

Passing actions is redundant and can be retrieved from flow.

Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: TC, Remove redundant action stack var

Remove the action stack var from parse tc fdb actions
and prase tc nic actions, use the flow attr action var directly.

Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Hide function mlx5e_num_channels_changed

No calls for mlx5e_num_channels_changed() out of en_main.c,
turn it static and remove from header.
Keep the wrapper function mlx5e_num_channels_changed_ctx exposed.

Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: SHAMPO, clean MLX5E_MAX_KLM_PER_WQE macro

This commit reduces unused variable from MLX5E_MAX_KLM_PER_WQE macro that
introduced by commit d7b896acbdcb ("net/mlx5e: Add support to klm_umr_wqe").

Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Print more info on pci error handlers

In case mlx5_pci_err_detected was called with state equals to
pci_channel_io_perm_failure, the driver will never come back up.

It is nice to know why the driver went to zombie land, so print some
useful information on pci err handlers.

Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>

net/mlx5: SF, silence an uninitialized variable warning

This code sometimes calls mlx5_sf_hw_table_hwc_init() when "ext_base_id"
is uninitialized.  It's not used on that path, but it generates a static
checker warning to pass uninitialized variables to another function.
It may also generate runtime UBSan  warnings depending on if the
mlx5_sf_hw_table_hwc_init() function is inlined or not.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>