OSDN Git Service
Jens Axboe [Thu, 16 Feb 2023 15:01:08 +0000 (08:01 -0700)]
brd: check for REQ_NOWAIT and set correct page allocation mask
If REQ_NOWAIT is set, then do a non-blocking allocation if the operation
is a write and we need to insert a new page. Currently REQ_NOWAIT cannot
be set as the queue isn't marked as supporting nowait, this change is in
preparation for allowing that.
radix_tree_preload() warns on attempting to call it with an allocation
mask that doesn't allow blocking. While that warning could arguably
be removed, we need to handle radix insertion failures anyway as they
are more likely if we cannot block to get memory.
Remove legacy BUG_ON()'s and turn them into proper errors instead, one
for the allocation failure and one for finding a page that doesn't
match the correct index.
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Thu, 16 Feb 2023 14:57:32 +0000 (07:57 -0700)]
brd: return 0/-error from brd_insert_page()
It currently returns a page, but callers just check for NULL/page to
gauge success. Clean this up and return the appropriate error directly
instead.
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Thu, 9 Feb 2023 12:55:27 +0000 (20:55 +0800)]
block: sync mixed merged request's failfast with 1st bio's
We support mixed merge for requests/bios with different fastfail
settings. When request fails, each time we only handle the portion
with same failfast setting, then bios with failfast can be failed
immediately, and bios without failfast can be retried.
The idea is pretty good, but the current implementation has several
defects:
1) initially RA bio doesn't set failfast, however bio merge code
doesn't consider this point, and just check its failfast setting for
deciding if mixed merge is required. Fix this issue by adding helper
of bio_failfast().
2) when merging bio to request front, if this request is mixed
merged, we have to sync request's faifast setting with 1st bio's
failfast. Fix it by calling blk_update_mixed_merge().
3) when merging bio to request back, if this request is mixed
merged, we have to mark the bio as failfast, because blk_update_request
simply updates request failfast with 1st bio's failfast. Fix
it by calling blk_update_mixed_merge().
Fixes one normal EXT4 READ IO failure issue, because it is observed
that the normal READ IO is merged with RA IO, and the mixed merged
request has different failfast setting with 1st bio's, so finally
the normal READ IO doesn't get retried.
Cc: Tejun Heo <tj@kernel.org>
Fixes:
80a761fd33cf ("block: implement mixed merge of different failfast requests")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230209125527.667004-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Wed, 15 Feb 2023 20:47:57 +0000 (13:47 -0700)]
Merge tag 'nvme-6.3-2023-02-15' of git://git.infradead.org/nvme into for-6.3/block
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.3
- fix and cleanup freeing single sgl (Keith Busch)"
* tag 'nvme-6.3-2023-02-15' of git://git.infradead.org/nvme:
nvme-pci: remove iod use_sgls
nvme-pci: fix freeing single sgl
Christoph Hellwig [Tue, 14 Feb 2023 18:33:08 +0000 (19:33 +0100)]
Revert "blk-cgroup: pin the gendisk in struct blkcg_gq"
This reverts commit
84d7d462b16dd5f0bf7c7ca9254bf81db2c952a2.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230214183308.1658775-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Tue, 14 Feb 2023 18:33:07 +0000 (19:33 +0100)]
Revert "blk-cgroup: pass a gendisk to blkg_lookup"
This reverts commit
821e840c08ad83736eced4037cdad864e95e2584.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230214183308.1658775-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Tue, 14 Feb 2023 18:33:06 +0000 (19:33 +0100)]
Revert "blk-cgroup: delay blk-cgroup initialization until add_disk"
This reverts commit
178fa7d49815ea8001f43ade37a22072829fd8ab.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230214183308.1658775-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Tue, 14 Feb 2023 18:33:05 +0000 (19:33 +0100)]
Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release"
This reverts commit
c43332fe028c252a2a28e46be70a530f64fc3c9d as it is not
needed without moving to disk references in the blkg.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230214183308.1658775-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Tue, 14 Feb 2023 18:33:04 +0000 (19:33 +0100)]
Revert "blk-cgroup: move the cgroup information to struct gendisk"
This reverts commit
3f13ab7c80fdb0ada86a8e3e818960bc1ccbaa59 as a patch
it depends on caused a few problems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230214183308.1658775-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Fri, 10 Feb 2023 18:03:47 +0000 (10:03 -0800)]
nvme-pci: remove iod use_sgls
It's not used anywhere anymore, so remove it.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Keith Busch [Fri, 10 Feb 2023 18:03:46 +0000 (10:03 -0800)]
nvme-pci: fix freeing single sgl
There may only be a single DMA mapped entry from multiple physical
segments, which means we don't allocate a separte SGL list. Check the
number of allocations prior to know if we need to free something.
Freeing a single list allocation is the same for both PRP and SGL
usages, so we don't need to check the use_sgl flag anymore.
Fixes:
01df742d8c5c0 ("nvme-pci: remove SGL segment descriptors")
Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Liu Xiaodong [Fri, 10 Feb 2023 14:13:56 +0000 (09:13 -0500)]
block: ublk: check IO buffer based on flag need_get_data
Currently, uring_cmd with UBLK_IO_FETCH_REQ or
UBLK_IO_COMMIT_AND_FETCH_REQ is always checked whether
userspace server has provided IO buffer even flag
UBLK_F_NEED_GET_DATA is configured.
This is a excessive check. If UBLK_F_NEED_GET_DATA is
configured, FETCH_RQ doesn't need to provide IO buffer;
COMMIT_AND_FETCH_REQ also doesn't need to do that if
the IO type is not READ.
Check ub_cmd->addr together with ublk_need_get_data()
and IO type in ublk_ch_uring_cmd().
With this fix, userspace server doesn't need to preserve
buffers for every ublk_io when flag UBLK_F_NEED_GET_DATA
is configured, in order to save memory.
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Fixes:
c86019ff75c1 ("ublk_drv: add support for UBLK_IO_NEED_GET_DATA")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230210141356.112321-1-xiaodong.liu@intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Qiheng Lin [Fri, 10 Feb 2023 00:02:53 +0000 (01:02 +0100)]
s390/dasd: Fix potential memleak in dasd_eckd_init()
`dasd_reserve_req` is allocated before `dasd_vol_info_req`, and it
also needs to be freed before the error returns, just like the other
cases in this function.
Fixes:
9e12e54c7a8f ("s390/dasd: Handle out-of-space constraint")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Link: https://lore.kernel.org/r/20221208133809.16796-1-linqiheng@huawei.com
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20230210000253.1644903-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Alexander Gordeev [Fri, 10 Feb 2023 00:02:52 +0000 (01:02 +0100)]
s390/dasd: sort out physical vs virtual pointers usage
This does not fix a real bug, since virtual addresses
are currently indentical to physical ones.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20230210000253.1644903-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Thu, 9 Feb 2023 23:01:35 +0000 (15:01 -0800)]
block: Remove the ALLOC_CACHE_SLACK constant
Commit
b99182c501c3 ("bio: add pcpu caching for non-polling bio_put")
removed the code that uses this constant. Hence also remove the constant
itself.
Cc: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230209230135.3475829-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Thomas Weißschuh [Wed, 8 Feb 2023 04:01:22 +0000 (04:01 +0000)]
block: make kobj_type structures constant
Since commit
ee6d3dd4ed48 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230208-kobj_type-block-v1-1-0b3eafd7d983@weissschuh.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Xiao Ni [Thu, 9 Feb 2023 03:19:30 +0000 (11:19 +0800)]
block: Merge bio before checking ->cached_rq
It checks if plug->cached_rq is empty before merging bio. But the merge action
doesn't have relationship with plug->cached_rq, it trys to merge bio with
requests within plug->mq_list. Now it checks if ->cached_rq is empty before
merging bio. If it's empty, it will miss the merge chances. So move the merge
function before checking ->cached_rq.
Signed-off-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230209031930.27354-1-xni@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Thu, 9 Feb 2023 05:35:23 +0000 (06:35 +0100)]
Revert "blk-cgroup: simplify blkg freeing from initialization failure paths"
It turns out this was too soon. blkg_conf_prep does to funky locking games
with the queue lock for this to work properly.
This reverts commit
27b642b07a4a5eb44dffa94a5171ce468bdc46f9.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230209053523.437927-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Wed, 8 Feb 2023 06:35:14 +0000 (07:35 +0100)]
blk-cgroup: delay calling blkcg_exit_disk until disk_release
While del_gendisk ensures there is no outstanding I/O on the queue,
it can't prevent block layer users from building new I/O.
This leads to a NULL ->root_blkg reference in bio_associate_blkg when
allocating a new bio on a shut down file system. Delay freeing the
blk-cgroup subsystems from del_gendisk until disk_release to make
sure the blkg and throttle information is still avaіlable for bio
submitters, even if those bios will immediately fail.
This now can cause a case where disk_release is called on a disk
that hasn't been added. That's mostly harmless, except for a case
in blk_throttl_exit that now needs to check for a NULL ->td pointer.
Fixes:
178fa7d49815 ("blk-cgroup: delay blk-cgroup initialization until add_disk")
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230208063514.171485-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Wed, 8 Feb 2023 23:59:35 +0000 (16:59 -0700)]
Merge branch 'md-next' of https://git./linux/kernel/git/song/md into for-6.3/block
Pull MD fix from Song:
"This commit fixes a rare crash during the takeover process."
* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: account io_acct_set usage with active_io
Xiao Ni [Fri, 3 Feb 2023 05:13:44 +0000 (13:13 +0800)]
md: account io_acct_set usage with active_io
io_acct_set was enabled for raid0/raid5 io accounting. bios that contain
md_io_acct are allocated in the i/o path. There isn't a good method to
monitor if these bios are all finished and freed. In the takeover process,
io_acct_set (which is used for bios with md_io_acct) need to be freed.
However, if some bios finish after io_acct_set is freed, it may trigger
the following panic:
[ 6973.767999] RIP: 0010:mempool_free+0x52/0x80
[ 6973.786098] Call Trace:
[ 6973.786549] md_end_io_acct+0x31/0x40
[ 6973.787227] blk_update_request+0x224/0x380
[ 6973.787994] blk_mq_end_request+0x1a/0x130
[ 6973.788739] blk_complete_reqs+0x35/0x50
[ 6973.789456] __do_softirq+0xd7/0x2c8
[ 6973.790114] ? sort_range+0x20/0x20
[ 6973.790763] run_ksoftirqd+0x2a/0x40
[ 6973.791400] smpboot_thread_fn+0xb5/0x150
[ 6973.792114] kthread+0x10b/0x130
[ 6973.792724] ? set_kthread_struct+0x50/0x50
[ 6973.793491] ret_from_fork+0x1f/0x40
Fix this by increasing and decreasing active_io for each bio with
md_io_acct so that mddev_suspend() will wait until all bios from
io_acct_set finish before freeing io_acct_set.
Reported-by: Fine Fan <ffan@redhat.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Ming Lei [Tue, 7 Feb 2023 15:07:00 +0000 (23:07 +0800)]
block: ublk: improve handling device deletion
Inside ublk_ctrl_del_dev(), when the device is removed, we wait
until the device number is freed with holding global lock of
ublk_ctl_mutex, this way isn't friendly from user viewpoint:
1) if device is in-use, the current delete command hangs in
ublk_ctrl_del_dev(), and user can't break from the handling
because wait_event() is used
2) global lock is held, so any new device can't be added and
other old devices can't be removed.
Improve the deleting handling by the following way, suggested by
Nadav:
1) wait without holding the global lock
2) replace wait_event() with wait_event_interruptible()
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Suggested-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230207150700.545530-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yu Kuai [Thu, 2 Feb 2023 13:49:13 +0000 (21:49 +0800)]
block, bfq: cleanup 'bfqg->online'
After commit
dfd6200a0954 ("blk-cgroup: support to track if policy is
online"), there is no need to do this again in bfq.
However, 'pd->online' is not protected by 'bfqd->lock', in order to make
sure bfq won't see that 'pd->online' is still set after bfq_pd_offline(),
clear it before bfq_pd_offline() is called. This is fine because other
polices doesn't use 'pd->online' and bfq_pd_offline() will move active
bfqq to root cgroup anyway.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230202134913.2364549-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Tue, 7 Feb 2023 14:22:58 +0000 (07:22 -0700)]
Merge tag 'nvme-6.3-2023-02-07' of git://git.infradead.org/nvme into for-6.3/block
Pull NVMe updates from Christoph:
"nvme updates for Linux 6.3
- small improvements to the logging functionality (Amit Engel)
- authentication cleanups (Hannes Reinecke)
- cleanup and optimize the DMA mapping cod in the PCIe driver
(Keith Busch)
- work around the command effects for Format NVM (Keith Busch)
- misc cleanups (Keith Busch, Christoph Hellwig)"
* tag 'nvme-6.3-2023-02-07' of git://git.infradead.org/nvme:
nvme: mask CSE effects for security receive
nvme: always initialize known command effects
nvmet: for nvme admin set_features cmd, call nvmet_check_data_len_lte()
nvme-tcp: add additional info for nvme_tcp_timeout log
nvme: add nvme_opcode_str function for all nvme cmd types
nvme: remove nvme_execute_passthru_rq
nvme-pci: place descriptor addresses in iod
nvme-pci: use mapped entries for sgl decision
nvme-pci: remove SGL segment descriptors
nvme-auth: don't use NVMe status codes
nvme-fabrics: clarify AUTHREQ result handling
Ziyang Zhang [Tue, 7 Feb 2023 07:08:39 +0000 (15:08 +0800)]
ublk: pass NULL to blk_mq_alloc_disk() as queuedata
queuedata is not referenced in ublk_drv and we can use driver_data
instead. Pass NULL to blk_mq_alloc_disk() as queuedata while allocating
ublk's gendisk.
Signed-off-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230207070839.370817-4-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ziyang Zhang [Tue, 7 Feb 2023 07:08:38 +0000 (15:08 +0800)]
ublk: mention WRITE_ZEROES in comment of ublk_complete_rq()
WRITE_ZEROES won't return bytes returned just like FLUSH and DISCARD,
and we can end it directly. Add missing comment for it in
ublk_complete_rq().
Signed-off-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230207070839.370817-3-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ziyang Zhang [Tue, 7 Feb 2023 07:08:37 +0000 (15:08 +0800)]
ublk: remove unnecessary NULL check in ublk_rq_has_data()
bio_has_data() allows a NULL bio so the NULL check in
ublk_rq_has_data() is unnecessary.
Signed-off-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230207070839.370817-2-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Greg Kroah-Hartman [Thu, 2 Feb 2023 14:19:56 +0000 (15:19 +0100)]
trace/blktrace: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: linux-block@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230202141956.2299521-1-gregkh@linuxfoundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:26 +0000 (17:37 +0800)]
blk-mq: correct stale comment of .get_budget
Commit
88022d7201e96 ("blk-mq: don't handle failure in .get_budget")
remove BLK_STS_RESOURCE return value and we only check if we can get
the budget from .get_budget() now.
Correct stale comment that ".get_budget() returns BLK_STS_NO_RESOURCE"
to ".get_budget() fails to get the budget".
Fixes:
88022d7201e9 ("blk-mq: don't handle failure in .get_budget")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:25 +0000 (17:37 +0800)]
blk-mq: use switch/case to improve readability in blk_mq_try_issue_list_directly
Use switch/case handle error as other function do to improve
readability in blk_mq_try_issue_list_directly.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:24 +0000 (17:37 +0800)]
blk-mq: remove set of bd->last when get driver tag for next request fails
Commit
113285b473824 ("blk-mq: ensure that bd->last is always set
correctly") will set last if we failed to get driver tag for next
request to avoid flush miss as we break the list walk and will not
send the last request in the list which will be sent with last set
normally.
This code seems stale now becase the flush introduced is always
redundant as:
For case tag is really out, we will send a extra flush if we find
list is not empty after list walk.
For case some tag is freed before retry in blk_mq_prep_dispatch_rq for
next, then we can get a tag for next request in retry and flush notified
already is not necessary.
Just remove these stale codes.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:23 +0000 (17:37 +0800)]
blk-mq: remove unnecessary error count and check in blk_mq_dispatch_rq_list
blk_mq_dispatch_rq_list will notify if hctx is busy in return bool. It will
return true if we are not busy and can handle more and return false on the
opposite. Inside blk_mq_dispatch_rq_list, errors is only used if list is
empty and we will return true if list is empty and (errors + queued) != 0.
There are three types of status returned from request:
-busy error BLK_STS*_RESOURCE: the failed request will be added back
to list and list will not be empty.
-BLK_STS_OK: We count queued for BLK_STS_OK
-rest error: We count errors for rest error
If list is empty, there is no request gets busy error then (errors +
queued) will be total requests in the list which is checked not empty at
beginning of blk_mq_dispatch_rq_list. So (errors + queued) != 0 is always
met if list is empty. Then the (errors + queued) != 0 check and errors
number count is not needed.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:22 +0000 (17:37 +0800)]
blk-mq: simplify flush check in blk_mq_dispatch_rq_list
1. Remove check of needs_resource and ret == BLK_STS_DEV_RESOURCE.
For busy error BLK_STS*_RESOURCE, request will always be added
back to list, so need_resource will not be true and ret will
not be == BLK_STS_DEV_RESOURCE if list is empty. We could remove
these dead check.
2. Check ret of last request instead of errors
If list is empty, we only need to explicitly commit_rqs
if error happens at last request which is stored in ret. So check
ret of last request instead of errors to remove unnecessary
commit_rqs triggered by errors returned from previous request.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:21 +0000 (17:37 +0800)]
blk-mq: use blk_mq_commit_rqs helper in blk_mq_try_issue_list_directly
Call blk_mq_commit_rqs instead of access ->commit_rqs directly. As you
can see in comment of blk_mq_commit_rqs, we only need explicitly call
this in two cases:
-did not queue everything initially scheduled to queue
-the last attempt to queue a request failed
Both cases can be checked with ret of last request which breaks list
walk. Then we can remove unnecessary error count and unnecessary
commit triggered by error besides cases described above.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:20 +0000 (17:37 +0800)]
blk-mq: remove unncessary error count and commit in blk_mq_plug_issue_direct
We need only to explicitly commit in two error cases:
-did not queue everything initially scheduled to queue
-the last attempt to queue a request failed
(see comment of blk_mq_commit_rqs for more details).
Both cases can be checked with ret of last request which breaks list walk.
Remove unnecessary error count and unnecessary commit triggered by error
which is not covered by cases described above.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:19 +0000 (17:37 +0800)]
blk-mq: make blk_mq_commit_rqs a general function for all commits
1. move blk_mq_commit_rqs forward before functions need commits.
2. add queued check and only commits request if any request was queued
in blk_mq_commit_rqs to keep commit behavior consistent and remove
unnecessary commit.
3. split the queued clearing from blk_mq_plug_commit_rqs as it is
not wanted general.
4. sync current caller of blk_mq_commit_rqs with new general
blk_mq_commit_rqs.
5. document rule for unusual cases which need explicit commit_rqs.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:18 +0000 (17:37 +0800)]
blk-mq: remove unncessary from_schedule parameter in blk_mq_plug_issue_direct
Function blk_mq_plug_issue_direct tries to issue batch requests in plug
list to driver directly. We will only issue plug request to driver if we
are not from scheduler, so from_scheduler parameter of
blk_mq_plug_issue_direct is always false.
Remove unncessary from_scheduler of blk_mq_plug_issue_direct.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:17 +0000 (17:37 +0800)]
blk-mq: remove unnecessary list_empty check in blk_mq_try_issue_list_directly
We only break the list walk if we get 'BLK_STS_*RESOURCE'. We also
count errors for 'BLK_STS_*RESOURCE' error. If list is not empty,
errors will always be non-zero. So we can remove unnecessary list_empty
check. This will remove redundant list_empty check for case that
error happened at sending last request in list.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:16 +0000 (17:37 +0800)]
blk-mq: Fix potential io hung for shared sbitmap per tagset
Commit
f906a6a0f4268 ("blk-mq: improve tag waiting setup for non-shared
tags") mark restart for unshared tags for improvement. At that time,
tags is only shared betweens queues and we can check if tags is shared
by test BLK_MQ_F_TAG_SHARED.
Afterwards, commit
32bc15afed04b ("blk-mq: Facilitate a shared sbitmap per
tagset") enabled tags share betweens hctxs inside a queue. We only
mark restart for shared hctxs inside a queue and may cause io hung if
there is no tag currently allocated by hctxs going to be marked restart.
Wait on sbitmap_queue instead of mark restart for shared hctxs case to
fix this.
Fixes:
32bc15afed04 ("blk-mq: Facilitate a shared sbitmap per tagset")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:15 +0000 (17:37 +0800)]
blk-mq: wait on correct sbitmap_queue in blk_mq_mark_tag_wait
For shared queues case, we will only wait on bitmap_tags if we fail to get
driver tag. However, rq could be from breserved_tags, then two problems
will occur:
1. io hung if no tag is currently allocated from bitmap_tags.
2. unnecessary wakeup when tag is freed to bitmap_tags while no tag is
freed to breserved_tags.
Wait on the bitmap which rq from to fix this.
Fixes:
f906a6a0f426 ("blk-mq: improve tag waiting setup for non-shared tags")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:14 +0000 (17:37 +0800)]
blk-mq: remove stale comment for blk_mq_sched_mark_restart_hctx
Commit
97889f9ac24f8 ("blk-mq: remove synchronize_rcu() from
blk_mq_del_queue_tag_set()") remove handle of TAG_SHARED in restart,
then shared_hctx_restart counted for how many hardware queues are marked
for restart is removed too.
Remove the stale comment that we still count hardware queues need restart.
Fixes:
97889f9ac24f ("blk-mq: remove synchronize_rcu() from blk_mq_del_queue_tag_set()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:13 +0000 (17:37 +0800)]
blk-mq: avoid sleep in blk_mq_alloc_request_hctx
Commit
1f5bd336b9150 ("blk-mq: add blk_mq_alloc_request_hctx") add
blk_mq_alloc_request_hctx to send commands to a specific queue. If
BLK_MQ_REQ_NOWAIT is not set in tag allocation, we may change to different
hctx after sleep and get tag from unexpected hctx. So BLK_MQ_REQ_NOWAIT
must be set in flags for blk_mq_alloc_request_hctx.
After commit
600c3b0cea784 ("blk-mq: open code __blk_mq_alloc_request in
blk_mq_alloc_request_hctx"), blk_mq_alloc_request_hctx return -EINVAL
if both BLK_MQ_REQ_NOWAIT and BLK_MQ_REQ_RESERVED are not set instead of
if BLK_MQ_REQ_NOWAIT is not set. So if BLK_MQ_REQ_NOWAIT is not set and
BLK_MQ_REQ_RESERVED is set, blk_mq_alloc_request_hctx could alloc tag
from unexpected hctx. I guess what we need here is that return -EINVAL
if either BLK_MQ_REQ_NOWAIT or BLK_MQ_REQ_RESERVED is not set.
Currently both BLK_MQ_REQ_NOWAIT and BLK_MQ_REQ_RESERVED will be set if
specific hctx is needed in nvme_auth_submit, nvmf_connect_io_queue
and nvmf_connect_admin_queue. Fix the potential BLK_MQ_REQ_NOWAIT missed
case in future.
Fixes:
600c3b0cea78 ("blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:02:09 +0000 (16:02 +0100)]
block: stub out and deprecated the capability attribute on the gendisk
The capability attribute was added in 2017 to expose the kernel internal
GENHD_FL_MEDIA_CHANGE_NOTIFY to userspace without ever adding a value to
an UAPI header, and without ever setting it in any driver until it was
finally removed in Linux 5.7.
Deprecate the file and always return 0 instead of exposing the other
internal and frequently renumbered other gendisk flags.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230203150209.3199115-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Mon, 6 Feb 2023 15:02:01 +0000 (16:02 +0100)]
blk-cgroup: fix freeing NULL blkg in blkg_create
new_blkg can be NULL if the caller didn't pass in a pre-allocated blkg.
Don't try to free it in that case.
Fixes:
27b642b07a4a ("blk-cgroup: simplify blkg freeing from initialization failure paths")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230206150201.3438972-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:34 +0000 (16:06 +0100)]
libceph: use bvec_set_page to initialize bvecs
Use the bvec_set_page helper to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-24-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:33 +0000 (16:06 +0100)]
vringh: use bvec_set_page to initialize a bvec
Use the bvec_set_page helper to initialize a bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-23-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:32 +0000 (16:06 +0100)]
sunrpc: use bvec_set_page to initialize bvecs
Use the bvec_set_page helper to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-22-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:31 +0000 (16:06 +0100)]
rxrpc: use bvec_set_page to initialize a bvec
Use the bvec_set_page helper to initialize a bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-21-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:30 +0000 (16:06 +0100)]
swap: use bvec_set_page to initialize bvecs
Use the bvec_set_page helper to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230203150634.3199647-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:29 +0000 (16:06 +0100)]
io_uring: use bvec_set_page to initialize a bvec
Use the bvec_set_page helper to initialize a bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:28 +0000 (16:06 +0100)]
splice: use bvec_set_page to initialize a bvec
Use the bvec_set_page helper to initialize a bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230203150634.3199647-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:27 +0000 (16:06 +0100)]
orangefs: use bvec_set_{page,folio} to initialize bvecs
Use the bvec_set_page and bvec_set_folio helpers to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230203150634.3199647-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:26 +0000 (16:06 +0100)]
nfs: use bvec_set_page to initialize bvecs
Use the bvec_set_page helper to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:25 +0000 (16:06 +0100)]
coredump: use bvec_set_page to initialize a bvec
Use the bvec_set_page helper to initialize a bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230203150634.3199647-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:24 +0000 (16:06 +0100)]
cifs: use bvec_set_page to initialize bvecs
Use the bvec_set_page helper to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Link: https://lore.kernel.org/r/20230203150634.3199647-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:23 +0000 (16:06 +0100)]
ceph: use bvec_set_page to initialize a bvec
Use the bvec_set_page helper to initialize a bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230203150634.3199647-13-hch@lst.de
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:22 +0000 (16:06 +0100)]
afs: use bvec_set_folio to initialize a bvec
Use the bvec_set_folio helper to initialize a bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:21 +0000 (16:06 +0100)]
zram: use bvec_set_page to initialize bvecs
Use the bvec_set_page helper to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:20 +0000 (16:06 +0100)]
virtio_blk: use bvec_set_virt to initialize special_vec
Use the bvec_set_virt helper to initialize the special_vec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:19 +0000 (16:06 +0100)]
rbd: use bvec_set_page to initialize the copy up bvec
Use the bvec_set_page helper to initialize the copy up bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:18 +0000 (16:06 +0100)]
nvme: use bvec_set_virt to initialize special_vec
Use the bvec_set_virt helper to initialize the special_vec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:17 +0000 (16:06 +0100)]
nvmet: use bvec_set_page to initialize bvecs
Use the bvec_set_page helper to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:16 +0000 (16:06 +0100)]
target: use bvec_set_page to initialize bvecs
Use the bvec_set_page helper to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:15 +0000 (16:06 +0100)]
sd: factor out a sd_set_special_bvec helper
Add a helper for setting up the special_bvec instead of open coding it
in three place, and use the new bvec_set_page helper to initialize
special_vec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:14 +0000 (16:06 +0100)]
block: add a bvec_set_virt helper
A small wrapper around bvec_set_page for callers that have a virtual
address.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:13 +0000 (16:06 +0100)]
block: add a bvec_set_folio helper
A smaller wrapper around bvec_set_page that takes a folio instead.
There are only two potential users for this in the tree, but the number
will grow in the future.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:06:12 +0000 (16:06 +0100)]
block: factor out a bvec_set_page helper
Add a helper to initialize a bvec based of a page pointer. This will help
removing various open code bvec initializations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:04:00 +0000 (16:04 +0100)]
blk-cgroup: move the cgroup information to struct gendisk
cgroup information only makes sense on a live gendisk that allows
file system I/O (which includes the raw block device). So move over
the cgroup related members.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:03:59 +0000 (16:03 +0100)]
blk-cgroup: pass a gendisk to blkg_lookup
Pass a gendisk to blkg_lookup and use that to find the match as part
of phasing out usage of the request_queue in the blk-cgroup code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:03:58 +0000 (16:03 +0100)]
blk-cgroup: pass a gendisk to pd_alloc_fn
No need to the request_queue here, pass a gendisk and extract the
node ids from that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:03:57 +0000 (16:03 +0100)]
blk-cgroup: pass a gendisk to blkcg_{de,}activate_policy
Prepare for storing the blkcg information in the gendisk instead of
the request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:03:56 +0000 (16:03 +0100)]
blk-rq-qos: store a gendisk instead of request_queue in struct rq_qos
This is what about half of the users already want, and it's only going to
grow more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:03:55 +0000 (16:03 +0100)]
blk-rq-qos: constify rq_qos_ops
These op vectors are constant, so mark them const.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:03:54 +0000 (16:03 +0100)]
blk-rq-qos: make rq_qos_add and rq_qos_del more useful
Switch to passing a gendisk, and make rq_qos_add initialize all required
fields and drop the not required q argument from rq_qos_del.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:03:53 +0000 (16:03 +0100)]
blk-rq-qos: move rq_qos_add and rq_qos_del out of line
These two functions are rather larger and not in a fast path, so move
them out of line.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:03:52 +0000 (16:03 +0100)]
blk-wbt: open code wbt_queue_depth_changed in wbt_init
wbt_queue_depth_changed just updates a field and calls another function.
Open code it in wbt_init, so that the local queue variable can be used
instead of the one stored in the rq_qos. This will allow delaying that
rq_qos->queue assignment in a subsequent patch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:03:51 +0000 (16:03 +0100)]
blk-wbt: move private information from blk-wbt.h to blk-wbt.c
A large part of blk-wbt.h is only used in blk-wbt.c, so move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:03:50 +0000 (16:03 +0100)]
blk-wbt: pass a gendisk to wbt_init
Pass a gendisk to wbt_init to prepare for phasing out usage of the
request_queue in the blk-cgroup code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:03:49 +0000 (16:03 +0100)]
blk-wbt: pass a gendisk to wbt_{enable,disable}_default
Pass a gendisk to wbt_enable_default and wbt_disable_default to
prepare for phasing out usage of the request_queue in the blk-cgroup
code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:03:48 +0000 (16:03 +0100)]
blk-cgroup: store a gendisk to throttle in struct task_struct
Switch from a request_queue pointer and reference to a gendisk once
for the throttle information in struct task_struct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Link: https://lore.kernel.org/r/20230203150400.3199230-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:03:47 +0000 (16:03 +0100)]
blk-cgroup: pin the gendisk in struct blkcg_gq
Currently each blkcg_gq holds a request_queue reference, which is what
is used in the policies. But a lot of these interfaces will move over to
use a gendisk, so store a disk in struct blkcg_gq and hold a reference to
it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:03:46 +0000 (16:03 +0100)]
blk-cgroup: remove the !bdi->dev check in blkg_dev_name
bdi_dev_name already performs the same check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:03:45 +0000 (16:03 +0100)]
blk-cgroup: simplify blkg freeing from initialization failure paths
There is no need to delay freeing a blkg to a workqueue when freeing it
after an initialization failure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:03:44 +0000 (16:03 +0100)]
blk-cgroup: improve error unwinding in blkg_alloc
Unwind only the previous initialization steps that happened in blkg_alloc
using goto based unwinding. This avoids the need for the !queue special
case in blkg_free and thus ensures that any blkg seens outside of
blkg_alloc is always fully constructed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:03:43 +0000 (16:03 +0100)]
blk-cgroup: delay blk-cgroup initialization until add_disk
There is no need to initialize the cgroup code before the disk is marked
live. Moving the cgroup initialization earlier will help to have a
fully initialized struct device in the gendisk for the cgroup code to
use in the future. Similarly tear the cgroup information down in
del_gendisk to be symmetric and because none of the cgroup tracking is
needed once non-passthrough I/O stops.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 3 Feb 2023 15:03:42 +0000 (16:03 +0100)]
block: don't call blk_throtl_stat_add for non-READ/WRITE commands
blk_throtl_stat_add is called from blk_stat_add explicitly, unlike the
other stats that go through q->stats->callbacks. To prepare for cgroup
data moving to the gendisk, ensure blk_throtl_stat_add is only called
for the plain READ and WRITE commands that it actually handles internally,
as blk_stat_add can also be called for passthrough commands on queues that
do not have a gendisk associated with them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Thu, 2 Feb 2023 23:04:54 +0000 (16:04 -0700)]
Merge branch 'md-next' of https://git./linux/kernel/git/song/md into for-6.3/block
Pull MD updates from Song:
"Non-urgent fixes:
md: don't update recovery_cp when curr_resync is ACTIVE
md: Free writes_pending in md_stop
Performance optimization:
md: Change active_io to percpu"
* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: use MD_RESYNC_* whenever possible
md: Free writes_pending in md_stop
md: Change active_io to percpu
md: Factor out is_md_suspended helper
md: don't update recovery_cp when curr_resync is ACTIVE
Hou Tao [Wed, 1 Feb 2023 07:59:20 +0000 (15:59 +0800)]
md: use MD_RESYNC_* whenever possible
Just replace magic numbers by MD_RESYNC_* enumerations.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Xiao Ni [Sat, 21 Jan 2023 01:48:10 +0000 (09:48 +0800)]
md: Free writes_pending in md_stop
dm raid calls md_stop to stop the raid device. It needs to
free the writes_pending here.
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Xiao Ni [Tue, 31 Jan 2023 05:17:10 +0000 (13:17 +0800)]
md: Change active_io to percpu
Now the type of active_io is atomic. It's used to count how many ios are
in the submitting process and it's added and decreased very time. But it
only needs to check if it's zero when suspending the raid. So we can
switch atomic to percpu to improve the performance.
After switching active_io to percpu type, we use the state of active_io
to judge if the raid device is suspended. And we don't need to wake up
->sb_wait in md_handle_request anymore. It's done in the callback function
which is registered when initing active_io. The argument mddev->suspended
is only used to count how many users are trying to set raid to suspend
state.
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Xiao Ni [Tue, 31 Jan 2023 05:17:09 +0000 (13:17 +0800)]
md: Factor out is_md_suspended helper
This helper function will be used in next patch. It's easy for
understanding.
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Hou Tao [Tue, 31 Jan 2023 07:07:19 +0000 (15:07 +0800)]
md: don't update recovery_cp when curr_resync is ACTIVE
Don't update recovery_cp when curr_resync is MD_RESYNC_ACTIVE, otherwise
md may skip the resync of the first 3 sectors if the resync procedure is
interrupted before the first calling of ->sync_request() as shown below:
md_do_sync thread control thread
// setup resync
mddev->recovery_cp = 0
j = 0
mddev->curr_resync = MD_RESYNC_ACTIVE
// e.g., set array as idle
set_bit(MD_RECOVERY_INTR, &&mddev_recovery)
// resync loop
// check INTR before calling sync_request
!test_bit(MD_RECOVERY_INTR, &mddev->recovery
// resync interrupted
// update recovery_cp from 0 to 3
// the resync of three 3 sectors will be skipped
mddev->recovery_cp = 3
Fixes:
eac58d08d493 ("md: Use enum for overloaded magic numbers used by mddev->curr_resync")
Cc: stable@vger.kernel.org # 6.0+
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Bart Van Assche [Mon, 30 Jan 2023 21:13:47 +0000 (13:13 -0800)]
loop: Improve the hw_queue_depth kernel module parameter implementation
Make the following minor changes which were reported by colleagues
while reviewing this code:
- Remove the parentheses from around the LOOP_DEFAULT_HW_Q_DEPTH
definition since these are superfluous.
- Accept other number formats than decimal, e.g. hexadecimal.
- Do not set hw_queue_depth to an out-of-range value, even if that value
won't be used.
- Use the LOOP_DEFAULT_HW_Q_DEPTH macro in the kernel module parameter
description to prevent that the description gets out of sync.
This patch has been tested as follows:
# modprobe -r loop
# modprobe loop hw_queue_depth=-1
modprobe: ERROR: could not insert 'loop': Invalid argument
# modprobe loop hw_queue_depth=0
modprobe: ERROR: could not insert 'loop': Invalid argument
# modprobe loop hw_queue_depth=1; cat /sys/module/loop/parameters/hw_queue_depth
1
# modprobe -r loop; modprobe loop; cat /sys/module/loop/parameters/hw_queue_depth hw_queue_depth=0x10
16
# modprobe -r loop; modprobe loop; cat /sys/module/loop/parameters/hw_queue_depth hw_queue_depth=128
128
# modprobe -r loop; modprobe loop hw_queue_depth=129; cat /sys/module/loop/parameters/hw_queue_depth
129
# modprobe -r loop; modprobe loop hw_queue_depth=$((1<<32))
modprobe: ERROR: could not insert 'loop': Numerical result out of range
See also commit
ef44c50837ab ("loop: allow user to set the queue
depth").
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230130211347.832110-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Fri, 27 Jan 2023 16:56:20 +0000 (08:56 -0800)]
nvme: mask CSE effects for security receive
The nvme driver will freeze the IO queues in response to an admin
command with CSE bits set. These bits notify the host that the command
that's about to be executed needs to be done exclusively, hence the
freeze.
The Security Receive command is often reported by multiple vendors with
CSE bits set. The reason for this is that the result depends on the
previous Security Send. This has nothing to do with IO queues, though,
so the driver is taking an overly cautious response to seeing this
passthrough command, while unable to fufill the intended admin queue
action.
Rather than freeze IO during this harmless command, mask off the
effects. This freezing is observed to cause IO latency spikes when host
software periodically validates the security state of the drives.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Keith Busch [Fri, 27 Jan 2023 16:56:19 +0000 (08:56 -0800)]
nvme: always initialize known command effects
Instead of appending command effects flags per IO, set the known effects
flags the driver needs to react to just once during initial setup.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Amit Engel [Wed, 4 Jan 2023 08:44:32 +0000 (10:44 +0200)]
nvmet: for nvme admin set_features cmd, call nvmet_check_data_len_lte()
This is due to the fact that the host is allowed to pass the controller
an sgl describing a buffer that is larger than the payload itself
Signed-off-by: Amit Engel <Amit.Engel@dell.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Amit Engel [Mon, 12 Dec 2022 19:40:36 +0000 (21:40 +0200)]
nvme-tcp: add additional info for nvme_tcp_timeout log
This provides additional details about the rq/cmd that is timed out
example log if CONFIG_NVME_VERBOSE_ERRORS is configured:
"nvme nvme0: queue 2 timeout cid 0xd058 type 4 opc Write (0x1)"
example log if CONFIG_NVME_VERBOSE_ERRORS is not configured:
"nvme nvme0: queue 2 timeout cid 0xd058 type 4 opc I/O Cmd (0x1)"
Signed-off-by: Amit Engel <Amit.Engel@dell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Amit Engel [Mon, 12 Dec 2022 19:40:35 +0000 (21:40 +0200)]
nvme: add nvme_opcode_str function for all nvme cmd types
nvme_opcode_str will handle io/admin/fabrics ops
This improves NVMe errors logging
Signed-off-by: Amit Engel <Amit.Engel@dell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Christoph Hellwig [Wed, 14 Dec 2022 09:13:16 +0000 (10:13 +0100)]
nvme: remove nvme_execute_passthru_rq
After moving the nvme_passthru_end call to the callers of
nvme_execute_passthru_rq, this function has become quite pointless,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Keith Busch [Thu, 5 Jan 2023 20:28:32 +0000 (12:28 -0800)]
nvme-pci: place descriptor addresses in iod
The 'struct nvme_iod' space is appended at the end of the preallocated
'struct request', and padded to the cache line size. This leaves some
free memory (in most kernel configs) up for grabs.
Instead of appending the nvme data descriptor addresses after the
scatterlist, inline these for free within struct nvme_iod. There is now
enough space in the mempool for 128 possibe segments.
And without increasing the size of the preallocated requests, we can
hold up to 5 PRP descriptor elements, allowing the driver to increase
its max transfer size to 8MB.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>