OSDN Git Service
Daniel P. Berrangé [Fri, 16 Dec 2022 12:57:47 +0000 (07:57 -0500)]
hw/watchdog: add trace events for watchdog action handling
The tracepoints aid in debugging the triggering of watchdog devices.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <
20221216125749.596075-4-berrange@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Daniel P. Berrangé [Fri, 16 Dec 2022 12:57:46 +0000 (07:57 -0500)]
hw/isa: add trace events for ICH9 LPC chip config access
These tracepoints aid in understanding and debugging the guest drivers
for the TCO watchdog.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <
20221216125749.596075-3-berrange@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Daniel P. Berrangé [Fri, 16 Dec 2022 12:57:45 +0000 (07:57 -0500)]
hw/acpi: add trace events for TCO watchdog register access
These tracepoints aid in understanding and debugging the guest drivers
for the TCO watchdog.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <
20221216125749.596075-2-berrange@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Maydell [Mon, 19 Dec 2022 10:28:57 +0000 (10:28 +0000)]
Merge tag 'pull-misc-
20221218' of https://gitlab.com/rth7680/qemu into staging
Fix tricore gdbstub.
Fix superh_cpu_synchronize_from_tb.
# gpg: Signature made Sun 18 Dec 2022 17:48:54 GMT
# gpg: using RSA key
7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-misc-
20221218' of https://gitlab.com/rth7680/qemu:
target/tricore: Fix gdbstub write to address registers
target/sh4: Mask restore of env->flags from tb->flags
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Mon, 12 Dec 2022 20:48:46 +0000 (14:48 -0600)]
target/tricore: Fix gdbstub write to address registers
Typo had double-writes to data registers.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1363
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Guenter Roeck [Mon, 12 Dec 2022 15:03:17 +0000 (09:03 -0600)]
target/sh4: Mask restore of env->flags from tb->flags
The values in env->flags are a subset of tb->flags.
Restore only the bits that belong.
Cc: qemu-stable@nongnu.org
Fixes:
ab419fd8a035 ("target/sh4: Fix TB_FLAG_UNALIGN")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <
20221212011345.GA2235238@roeck-us.net>
[rth: Reduce to only the the superh_cpu_synchronize_from_tb change]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Sun, 18 Dec 2022 17:02:11 +0000 (17:02 +0000)]
Merge tag 'pull-hex-
20221216-1' of https://github.com/quic/qemu into staging
1)
Performance improvement
Add pkt and insn to DisasContext
Many functions need information from all 3 structures, so merge
them together.
2)
Bug fix
Fix predicated assignment to .tmp and .cur
3)
Performance improvement
Add overrides for S2_asr_r_r_sat/S2_asl_r_r_sat
These functions will not be handled by idef-parser
4-11)
The final 8 patches improve change-of-flow handling.
Currently, we set the PC to a new address before exiting a TB. The
ultimate goal is to use direct block chaining. However, several steps
are needed along the way.
4)
When a packet has more than one change-of-flow (COF) instruction, only
the first one taken is considered. The runtime bookkeeping is only
needed when there is more than one COF instruction in a packet.
5, 6)
Remove PC and next_PC from the runtime state and always use a
translation-time constant. Note that next_PC is used by call instructions
to set LR and by conditional COF instructions to set the fall-through
address.
7, 8, 9)
Add helper overrides for COF instructions. In particular, we must
distinguish those that use a PC-relative address for the destination.
These are candidates for direct block chaining later.
10)
Use direct block chaining for packets that have a single PC-relative
COF instruction. Instead of generating the code while processing the
instruction, we record the effect in DisasContext and generate the code
during gen_end_tb.
11)
Use direct block chaining for tight loops. We look for TBs that end
with an endloop0 that will branch back to the TB start address.
12-21)
Instruction definition parser (idef-parser) from rev.ng
Parses the instruction semantics and generates TCG
# gpg: Signature made Fri 16 Dec 2022 20:41:53 GMT
# gpg: using RSA key
3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* tag 'pull-hex-
20221216-1' of https://github.com/quic/qemu: (21 commits)
target/hexagon: import additional tests
target/hexagon: call idef-parser functions
target/hexagon: import parser for idef-parser
target/hexagon: import lexer for idef-parser
target/hexagon: prepare input for the idef-parser
target/hexagon: introduce new helper functions
target/hexagon: make helper functions non-static
target/hexagon: make slot number an unsigned
target/hexagon: import README for idef-parser
target/hexagon: update MAINTAINERS for idef-parser
Hexagon (target/hexagon) Use direct block chaining for tight loops
Hexagon (target/hexagon) Use direct block chaining for direct jump/branch
Hexagon (target/hexagon) Add overrides for various forms of jump
Hexagon (target/hexagon) Add overrides for compound compare and jump
Hexagon (target/hexagon) Add overrides for direct call instructions
Hexagon (target/hexagon) Remove next_PC from runtime state
Hexagon (target/hexagon) Remove PC from the runtime state
Hexagon (target/hexagon) Only use branch_taken when packet has multi cof
Hexagon (target/hexagon) Add overrides for S2_asr_r_r_sat/S2_asl_r_r_sat
Hexagon (target/hexagon) Fix predicated assignment to .tmp and .cur
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Sun, 18 Dec 2022 13:53:29 +0000 (13:53 +0000)]
Merge tag 'pull-loongarch-
20221215' of https://gitlab.com/gaosong/qemu into staging
Add cfi01 pflash device
# gpg: Signature made Thu 15 Dec 2022 07:49:03 GMT
# gpg: using RSA key
B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-
20221215' of https://gitlab.com/gaosong/qemu:
hw/loongarch/virt: Add cfi01 pflash device
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Sat, 17 Dec 2022 14:12:52 +0000 (14:12 +0000)]
Merge tag 'pull-target-arm-
20221216' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
reset refactoring queue:
* remove uses of qdev_reset_all(), qbus_reset_all(), device_legacy_reset()
* convert various devices to 3-phase reset, so we can remove their
uses of device_class_set_parent_reset()
# gpg: Signature made Fri 16 Dec 2022 21:41:11 GMT
# gpg: using RSA key
E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-
20221216' of https://git.linaro.org/people/pmaydell/qemu-arm: (36 commits)
hw/pci-host/pnv_phb3_msi: Convert TYPE_PHB3_MSI to 3-phase reset
hw/intc/xics: Convert TYPE_ICS to 3-phase reset
hw/intc/xics: Reset TYPE_ICS objects with device_cold_reset()
pci: Convert child classes of TYPE_PCIE_ROOT_PORT to 3-phase reset
pci: Convert TYPE_PCIE_ROOT_PORT to 3-phase reset
hw/display/virtio-vga: Convert TYPE_VIRTIO_VGA_BASE to 3-phase reset
hw/virtio: Convert TYPE_VIRTIO_PCI to 3-phase reset
target/xtensa: Convert to 3-phase reset
target/tricore: Convert to 3-phase reset
target/sparc: Convert to 3-phase reset
target/sh4: Convert to 3-phase reset
target/rx: Convert to 3-phase reset
target/riscv: Convert to 3-phase reset
target/ppc: Convert to 3-phase reset
target/openrisc: Convert to 3-phase reset
target/nios2: Convert to 3-phase reset
target/mips: Convert to 3-phase reset
target/microblaze: Convert to 3-phase reset
target/m68k: Convert to 3-phase reset
target/loongarch: Convert to 3-phase reset
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Niccolò Izzo [Fri, 23 Sep 2022 17:38:31 +0000 (19:38 +0200)]
target/hexagon: import additional tests
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Niccolò Izzo <nizzo@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20220923173831.227551-12-anjo@rev.ng>
Alessandro Di Federico [Fri, 23 Sep 2022 17:38:30 +0000 (19:38 +0200)]
target/hexagon: call idef-parser functions
Extend gen_tcg_funcs.py in order to emit calls to the functions emitted
by the idef-parser, if available.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20220923173831.227551-11-anjo@rev.ng>
Anton Johansson [Fri, 23 Sep 2022 17:38:29 +0000 (19:38 +0200)]
target/hexagon: import parser for idef-parser
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Paolo Montesel <babush@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20220923173831.227551-10-anjo@rev.ng>
Paolo Montesel [Fri, 23 Sep 2022 17:38:28 +0000 (19:38 +0200)]
target/hexagon: import lexer for idef-parser
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Paolo Montesel <babush@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20220923173831.227551-9-anjo@rev.ng>
Alessandro Di Federico [Fri, 23 Sep 2022 17:38:27 +0000 (19:38 +0200)]
target/hexagon: prepare input for the idef-parser
Introduce infrastructure necessary to produce a file suitable for being
parsed by the idef-parser. A build option is also added to fully disable
the output of idef-parser, which is useful for debugging.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20220923173831.227551-8-anjo@rev.ng>
Niccolò Izzo [Fri, 23 Sep 2022 17:38:25 +0000 (19:38 +0200)]
target/hexagon: introduce new helper functions
These helpers will be employed by the idef-parser generated code, to
correctly implement instruction semantics. "Helper" functions, in the
context of this patch, refers to functions which provide a manual TCG
implementation of certain features.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Niccolò Izzo <nizzo@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20220923173831.227551-6-anjo@rev.ng>
Paolo Montesel [Fri, 23 Sep 2022 17:38:24 +0000 (19:38 +0200)]
target/hexagon: make helper functions non-static
Make certain helper functions non-static, making them available outside
genptr.c. These functions are required by code generated by the
idef-parser.
This commit also makes some functions in op_helper.c non-static in order
to avoid having them marked as unused when using the idef-parser
generated code.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Paolo Montesel <babush@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20220923173831.227551-5-anjo@rev.ng>
Paolo Montesel [Fri, 23 Sep 2022 17:38:23 +0000 (19:38 +0200)]
target/hexagon: make slot number an unsigned
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Paolo Montesel <babush@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20220923173831.227551-4-anjo@rev.ng>
Alessandro Di Federico [Fri, 23 Sep 2022 17:38:22 +0000 (19:38 +0200)]
target/hexagon: import README for idef-parser
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20220923173831.227551-3-anjo@rev.ng>
Alessandro Di Federico [Fri, 23 Sep 2022 17:38:21 +0000 (19:38 +0200)]
target/hexagon: update MAINTAINERS for idef-parser
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20220923173831.227551-2-anjo@rev.ng>
Taylor Simpson [Thu, 10 Nov 2022 17:49:35 +0000 (09:49 -0800)]
Hexagon (target/hexagon) Use direct block chaining for tight loops
Direct block chaining is documented here
https://qemu.readthedocs.io/en/latest/devel/tcg.html#direct-block-chaining
Hexagon inner loops end with the endloop0 instruction
To go back to the beginning of the loop, this instructions writes to PC
from register SA0 (start address 0). To use direct block chaining, we
have to assign PC with a constant value. So, we specialize the code
generation when the start of the translation block is equal to SA0.
When this is the case, we defer the compare/branch from endloop0 to
gen_end_tb. When this is done, we can assign the start address of the TB
to PC.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20221108162906.3166-12-tsimpson@quicinc.com>
Taylor Simpson [Tue, 8 Nov 2022 16:29:05 +0000 (08:29 -0800)]
Hexagon (target/hexagon) Use direct block chaining for direct jump/branch
Direct block chaining is documented here
https://qemu.readthedocs.io/en/latest/devel/tcg.html#direct-block-chaining
Recall that Hexagon allows packets with multiple jumps where only the
first one with a true predicate will actually jump. We can use
tcg_gen_goto_tb/tcg_gen_exit_tb when the packet contains a single
PC-relative branch or jump. If not, we use tcg_gen_lookup_and_goto_ptr.
We add the following to DisasContext in order to delay the branching
until the end of packet commit (in gen_end_tb)
branch_cond
The TCGCond condition under which the branch is taken
When branch_cond == TCG_COND_NEVER, there isn't a single
direct branch in this packet.
When branch_cond != TCG_COND_ALWAYS, the value is in
hex_branch_taken
branch_dest
The destination of the branch
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20221108162906.3166-11-tsimpson@quicinc.com>
Taylor Simpson [Tue, 8 Nov 2022 16:29:04 +0000 (08:29 -0800)]
Hexagon (target/hexagon) Add overrides for various forms of jump
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20221108162906.3166-10-tsimpson@quicinc.com>
Taylor Simpson [Tue, 8 Nov 2022 16:29:03 +0000 (08:29 -0800)]
Hexagon (target/hexagon) Add overrides for compound compare and jump
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20221108162906.3166-9-tsimpson@quicinc.com>
Taylor Simpson [Tue, 8 Nov 2022 16:29:02 +0000 (08:29 -0800)]
Hexagon (target/hexagon) Add overrides for direct call instructions
Add overrides for
J2_call
J2_callt
J2_callf
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20221108162906.3166-8-tsimpson@quicinc.com>
Taylor Simpson [Tue, 8 Nov 2022 16:29:01 +0000 (08:29 -0800)]
Hexagon (target/hexagon) Remove next_PC from runtime state
The imported files don't properly mark all CONDEXEC instructions, so
we add some logic to hex_common.py to add the attribute.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20221108162906.3166-7-tsimpson@quicinc.com>
Taylor Simpson [Tue, 8 Nov 2022 16:29:00 +0000 (08:29 -0800)]
Hexagon (target/hexagon) Remove PC from the runtime state
Add pc field to Packet structure
For helpers that need PC, pass an extra argument
Remove slot arg from conditional jump helpers
On a trap0, copy pkt->pc into hex_gpr[HEX_REG_PC]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20221108162906.3166-6-tsimpson@quicinc.com>
Taylor Simpson [Tue, 8 Nov 2022 16:28:59 +0000 (08:28 -0800)]
Hexagon (target/hexagon) Only use branch_taken when packet has multi cof
When a packet has more than one change-of-flow instruction, only the first
one to branch is considered. We use the branch_taken variable to keep
track of this.
However, when there is a single cof instruction, we don't need the same
amount of bookkeeping.
We add the pkt_has_multi_cof member to the Packet structure, and pass this
information to the needed functions.
When there is a generated helper function with cof, the generator will
pass this pkt_has_multi_cof as a runtime value.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20221108162906.3166-5-tsimpson@quicinc.com>
Taylor Simpson [Tue, 8 Nov 2022 16:28:58 +0000 (08:28 -0800)]
Hexagon (target/hexagon) Add overrides for S2_asr_r_r_sat/S2_asl_r_r_sat
These instructions will not be generated by idef-parser, so we override
them manually.
Test cases added to tests/tcg/hexagon/usr.c
Co-authored-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20221108162906.3166-4-tsimpson@quicinc.com>
Taylor Simpson [Tue, 8 Nov 2022 16:28:57 +0000 (08:28 -0800)]
Hexagon (target/hexagon) Fix predicated assignment to .tmp and .cur
Here are example instructions with a predicated .tmp/.cur assignment
if (p1) v12.tmp = vmem(r7 + #0)
if (p0) v12.cur = vmem(r9 + #0)
The .tmp/.cur indicates that references to v12 in the same packet
take the result of the load. However, when the predicate is false,
the value at the start of the packet should be used. After the packet
commits, the .tmp value is dropped, but the .cur value is maintained.
To fix this bug, we preload the original value from the HVX register
into the temporary used for the result.
Test cases added to tests/tcg/hexagon/hvx_misc.c
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Co-authored-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20221108162906.3166-3-tsimpson@quicinc.com>
Taylor Simpson [Tue, 8 Nov 2022 16:28:56 +0000 (08:28 -0800)]
Hexagon (target/hexagon) Add pkt and insn to DisasContext
This enables us to reduce the number of parameters to many functions
In particular, the generated functions previously took all 3 as arguments
Not only does this simplify the code, it improves the translation time
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <
20221108162906.3166-2-tsimpson@quicinc.com>
Peter Maydell [Fri, 25 Nov 2022 11:52:40 +0000 (11:52 +0000)]
hw/pci-host/pnv_phb3_msi: Convert TYPE_PHB3_MSI to 3-phase reset
Convert the TYPE_PHB3_MSI class to 3-phase reset, so we can
avoid using the device_class_set_parent_reset() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20221125115240.
3005559-8-peter.maydell@linaro.org
Peter Maydell [Fri, 25 Nov 2022 11:52:39 +0000 (11:52 +0000)]
hw/intc/xics: Convert TYPE_ICS to 3-phase reset
Convert the TYPE_ICS class to 3-phase reset; this will allow us
to convert the TYPE_PHB3_MSI class which inherits from it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20221125115240.
3005559-7-peter.maydell@linaro.org
Peter Maydell [Fri, 25 Nov 2022 11:52:38 +0000 (11:52 +0000)]
hw/intc/xics: Reset TYPE_ICS objects with device_cold_reset()
The realize method for the TYPE_ICS class uses qemu_register_reset()
to register a reset handler, as a workaround for the fact that
currently objects which directly inherit from TYPE_DEVICE don't get
automatically reset. However, the reset function directly calls
ics_reset(), which is the function that implements the legacy reset
method. This means that only the parent class's data gets reset, and
a subclass which also needs to handle reset, like TYPE_PHB3_MSI, has
to register its own reset function.
Make the TYPE_ICS reset function call device_cold_reset() instead:
this will handle reset for both the parent class and the subclass,
and will work whether the classes are using legacy reset or 3-phase
reset. This allows us to remove the reset function that the subclass
currently has to set up.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20221125115240.
3005559-6-peter.maydell@linaro.org
Peter Maydell [Fri, 25 Nov 2022 11:52:37 +0000 (11:52 +0000)]
pci: Convert child classes of TYPE_PCIE_ROOT_PORT to 3-phase reset
Convert the TYPE_CXL_ROOT_PORT and TYPE_PNV_PHB_ROOT_PORT classes to
3-phase reset, so they don't need to use the deprecated
device_class_set_parent_reset() function any more.
We have to do both in the same commit, because they keep the
parent_reset field in their common parent class's class struct.
Note that pnv_phb_root_port_class_init() was pointlessly setting
dc->reset twice, once by calling device_class_set_parent_reset()
and once directly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20221125115240.
3005559-5-peter.maydell@linaro.org
Peter Maydell [Fri, 25 Nov 2022 11:52:36 +0000 (11:52 +0000)]
pci: Convert TYPE_PCIE_ROOT_PORT to 3-phase reset
Convert the TYPE_PCIE_ROOT_PORT device to 3-phase reset; this is a
necessary precursor to converting any of its child classes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20221125115240.
3005559-4-peter.maydell@linaro.org
Peter Maydell [Fri, 25 Nov 2022 11:52:35 +0000 (11:52 +0000)]
hw/display/virtio-vga: Convert TYPE_VIRTIO_VGA_BASE to 3-phase reset
Convert the TYPE_VIRTIO_VGA_BASE class to 3-phase reset, so we
don't need to use device_class_set_parent_reset() any more.
Note that this is an abstract class itself; none of the subclasses
override its reset method.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20221125115240.
3005559-3-peter.maydell@linaro.org
Peter Maydell [Fri, 25 Nov 2022 11:52:34 +0000 (11:52 +0000)]
hw/virtio: Convert TYPE_VIRTIO_PCI to 3-phase reset
Convert the TYPE_VIRTIO_PCI class to 3-phase reset. This is
necessary so that we can convert the subclass TYPE_VIRTIO_VGA_BASE
also to 3-phase reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20221125115240.
3005559-2-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:22 +0000 (11:50 +0000)]
target/xtensa: Convert to 3-phase reset
Convert the xtensa CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id:
20221124115023.
2437291-20-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:21 +0000 (11:50 +0000)]
target/tricore: Convert to 3-phase reset
Convert the tricore CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id:
20221124115023.
2437291-19-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:20 +0000 (11:50 +0000)]
target/sparc: Convert to 3-phase reset
Convert the sparc CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id:
20221124115023.
2437291-18-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:19 +0000 (11:50 +0000)]
target/sh4: Convert to 3-phase reset
Convert the sh4 CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-id:
20221124115023.
2437291-17-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:18 +0000 (11:50 +0000)]
target/rx: Convert to 3-phase reset
Convert the rx CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-id:
20221124115023.
2437291-16-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:17 +0000 (11:50 +0000)]
target/riscv: Convert to 3-phase reset
Convert the riscv CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-id:
20221124115023.
2437291-15-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:16 +0000 (11:50 +0000)]
target/ppc: Convert to 3-phase reset
Convert the ppc CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-id:
20221124115023.
2437291-14-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:15 +0000 (11:50 +0000)]
target/openrisc: Convert to 3-phase reset
Convert the openrisc CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id:
20221124115023.
2437291-13-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:14 +0000 (11:50 +0000)]
target/nios2: Convert to 3-phase reset
Convert the nios2 CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id:
20221124115023.
2437291-12-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:13 +0000 (11:50 +0000)]
target/mips: Convert to 3-phase reset
Convert the mips CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id:
20221124115023.
2437291-11-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:12 +0000 (11:50 +0000)]
target/microblaze: Convert to 3-phase reset
Convert the microblaze CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id:
20221124115023.
2437291-10-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:11 +0000 (11:50 +0000)]
target/m68k: Convert to 3-phase reset
Convert the m68k CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id:
20221124115023.
2437291-9-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:10 +0000 (11:50 +0000)]
target/loongarch: Convert to 3-phase reset
Convert the loongarch CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id:
20221124115023.
2437291-8-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:09 +0000 (11:50 +0000)]
target/i386: Convert to 3-phase reset
Convert the i386 CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id:
20221124115023.
2437291-7-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:08 +0000 (11:50 +0000)]
target/hexagon: Convert to 3-phase reset
Convert the hexagon CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id:
20221124115023.
2437291-6-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:07 +0000 (11:50 +0000)]
target/cris: Convert to 3-phase reset
Convert the cris CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Message-id:
20221124115023.
2437291-5-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:06 +0000 (11:50 +0000)]
target/avr: Convert to 3-phase reset
Convert the avr CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id:
20221124115023.
2437291-4-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:05 +0000 (11:50 +0000)]
target/arm: Convert to 3-phase reset
Convert the Arm CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id:
20221124115023.
2437291-3-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:04 +0000 (11:50 +0000)]
hw/core/cpu-common: Convert TYPE_CPU class to 3-phase reset
Convert the parent class TYPE_CPU to 3-phase reset. This
is a necessary prerequisite to converting the subclasses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
20221124115023.
2437291-2-peter.maydell@linaro.org
Peter Maydell [Thu, 10 Nov 2022 14:34:59 +0000 (14:34 +0000)]
hw/misc: Convert TYPE_MOS6522 subclasses to 3-phase reset
Convert the various subclasses of TYPE_MOS6522 to 3-phase reset.
This removes some uses of device_class_set_parent_reset(), which we
would eventually like to be able to get rid of.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20221110143459.
3833425-3-peter.maydell@linaro.org
Peter Maydell [Thu, 10 Nov 2022 14:34:58 +0000 (14:34 +0000)]
hw/misc/mos6522: Convert TYPE_MOS6522 to 3-phase reset
Convert the TYPE_MOS6522 parent class to use 3-phase reset. This is
a prerequisite for converting its subclasses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20221110143459.
3833425-2-peter.maydell@linaro.org
Peter Maydell [Wed, 9 Nov 2022 17:00:09 +0000 (17:00 +0000)]
hw/input/ps2.c: Convert TYPE_PS2_{KBD, MOUSE}_DEVICE to 3-phase reset
Convert the child classes TYPE_PS2_KBD_DEVICE and
TYPE_PS2_MOUSE_DEVICE to the 3-phase reset system. This allows us to
stop using the old device_class_set_parent_reset() function.
We don't need to register an 'exit' phase function for the
subclasses, because they have no work to do in that phase. Passing
NULL to resettable_class_set_parent_phases() will result in the
parent class method being called for that phase, so we don't need to
register a function purely to chain to the parent 'exit' phase
function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20221109170009.
3498451-3-peter.maydell@linaro.org
Peter Maydell [Wed, 9 Nov 2022 17:00:08 +0000 (17:00 +0000)]
hw/input/ps2: Convert TYPE_PS2_DEVICE to 3-phase reset
Convert the parent class TYPE_PS2_DEVICE to 3-phase reset. Note that
we need an 'exit' phase function as well as the usual 'hold' phase
function, because changing outbound IRQ line state is only permitted
in 'exit'. (Strictly speaking it's not supposed to be done in a
legacy reset handler either, but you can often get away with it.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20221109170009.
3498451-2-peter.maydell@linaro.org
Peter Maydell [Fri, 16 Dec 2022 15:55:28 +0000 (15:55 +0000)]
hw: Remove device_legacy_reset()
The device_legacy_reset() function is now not used anywhere, so we
can remove the implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 16 Dec 2022 15:55:27 +0000 (15:55 +0000)]
qdev: Remove qdev_reset_all() and qbus_reset_all()
Remove the qdev_reset_all() and qbus_reset_all() functions, now we
have moved all the callers over to the new device_cold_reset() and
bus_cold_reset() functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 16 Dec 2022 15:55:27 +0000 (15:55 +0000)]
Replace use of qdev_reset_all() with device_cold_reset()
The legacy function qdev_reset_all() performs a recursive reset,
starting from a qdev. However, it does not permit any of the devices
in the tree to use three-phase reset, because device reset goes
through the device_legacy_reset() function that only calls the single
DeviceClass::reset method.
Switch to using the device_cold_reset() function instead. This also
performs a recursive reset, where first the children are reset and
then finally the parent, but it uses the new (...in 2020...)
Resettable mechanism, which supports both the old style single-reset
method and also the new 3-phase reset handling.
This commit changes the five remaining uses of this function.
Commit created with:
sed -i -e 's/qdev_reset_all/device_cold_reset/g' hw/i386/xen/xen_platform.c hw/input/adb.c hw/remote/vfio-user-obj.c hw/s390x/s390-virtio-ccw.c hw/usb/dev-uas.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 16 Dec 2022 15:55:26 +0000 (15:55 +0000)]
hw/hyperv/vmbus: Use device_cold_reset() and bus_cold_reset()
In the vmbus code we currently use the legacy functions
qdev_reset_all() and qbus_reset_all(). These perform a recursive
reset, starting from either a qbus or a qdev. However they do not
permit any of the devices in the tree to use three-phase reset,
because device reset goes through the device_legacy_reset() function
that only calls the single DeviceClass::reset method.
Switch to using the device_cold_reset() and bus_cold_reset()
functions. These also perform a recursive reset, where first the
children are reset and then finally the parent, but they use the new
(...in 2020...) Resettable mechanism, which supports both the old
style single-reset method and also the new 3-phase reset handling.
This should be a no-behaviour-change commit which just reduces the
use of a deprecated API.
Commit created with:
sed -i -e 's/qdev_reset_all/device_cold_reset/g;s/qbus_reset_all/bus_cold_reset/g' hw/hyperv/*.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 16 Dec 2022 15:55:26 +0000 (15:55 +0000)]
pci: Use device_cold_reset() and bus_cold_reset()
In the PCI subsystem we currently use the legacy function
qdev_reset_all() and qbus_reset_all(). These perform a recursive
reset, starting from either a qbus or a qdev. However they do not
permit any of the devices in the tree to use three-phase reset,
because device reset goes through the device_legacy_reset() function
that only calls the single DeviceClass::reset method.
Switch to using the device_cold_reset() and bus_cold_reset()
functions. These also perform a recursive reset, where first the
children are reset and then finally the parent, but they use the new
(...in 2020...) Resettable mechanism, which supports both the old
style single-reset method and also the new 3-phase reset handling.
This should be a no-behaviour-change commit which just reduces the
use of a deprecated API.
Commit created with:
sed -i -e 's/qdev_reset_all/device_cold_reset/g;s/qbus_reset_all/bus_cold_reset/g' hw/pci/*.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 16 Dec 2022 15:55:24 +0000 (15:55 +0000)]
hw/s390x/s390-pci-inst.c: Use device_cold_reset() to reset PCI devices
The semantic difference between the deprecated device_legacy_reset()
function and the newer device_cold_reset() function is that the new
function resets both the device itself and any qbuses it owns,
whereas the legacy function resets just the device itself and nothing
else.
In s390-pci-inst.c we use device_legacy_reset() to reset an
S390PCIBusDevice. This device doesn't have any child qbuses, so the
functions do the same thing and we can stop using the deprecated one.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 16 Dec 2022 13:26:09 +0000 (13:26 +0000)]
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- Code cleanups around block graph modification
- Simplify drain
- coroutine_fn correctness fixes, including splitting generated
coroutine wrappers into co_wrapper (to be called only from
non-coroutine context) and co_wrapper_mixed (both coroutine and
non-coroutine context)
- Introduce a block graph rwlock
# gpg: Signature made Thu 15 Dec 2022 15:08:34 GMT
# gpg: using RSA key
DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (50 commits)
block: GRAPH_RDLOCK for functions only called by co_wrappers
block: use co_wrapper_mixed_bdrv_rdlock in functions taking the rdlock
block-coroutine-wrapper.py: introduce annotations that take the graph rdlock
Mark assert_bdrv_graph_readable/writable() GRAPH_RD/WRLOCK
graph-lock: TSA annotations for lock/unlock functions
block: assert that graph read and writes are performed correctly
block: remove unnecessary assert_bdrv_graph_writable()
block: wrlock in bdrv_replace_child_noperm
block: Fix locking in external_snapshot_prepare()
test-bdrv-drain: Fix incorrrect drain assumptions
clang-tsa: Add macros for shared locks
clang-tsa: Add TSA_ASSERT() macro
Import clang-tsa.h
async: Register/unregister aiocontext in graph lock list
graph-lock: Implement guard macros
graph-lock: Introduce a lock to protect block graph operations
block: Factor out bdrv_drain_all_begin_nopoll()
block/dirty-bitmap: convert coroutine-only functions to co_wrapper
block: convert bdrv_create to co_wrapper
block-coroutine-wrapper.py: support also basic return types
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 15 Dec 2022 21:39:56 +0000 (21:39 +0000)]
Merge tag 'pull-request-2022-12-15' of https://gitlab.com/thuth/qemu into staging
* s390x PCI fixes and improvements (for the ISM device)
* Fix emulated MVCP and MVCS s390x instructions
* Clean-ups for the e1000e qtest
* Enable qtests on Windows
* Update FreeBSD CI to version 12.4
* Check --disable-tcg for ppc64 in the CI
* Improve scripts/make-releases a little bit
* Many other misc small clean-ups and fixes here and there
# gpg: Signature made Thu 15 Dec 2022 15:05:44 GMT
# gpg: using RSA key
27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-12-15' of https://gitlab.com/thuth/qemu: (23 commits)
tests/qtest/vhost-user-blk-test: don't abort all qtests on missing envar
.gitlab/issue_templates: Move suggestions into comments
gitlab-ci: Check building ppc64 without TCG
FreeBSD: Upgrade to 12.4 release
tests/qtest: Enable qtest build on Windows
.gitlab-ci.d/windows.yml: Exclude qTests from 64-bit CI job for now
.gitlab-ci.d/windows.yml: Keep 64-bit and 32-bit build scripts consistent
.gitlab-ci.d/windows.yml: Unify the prerequisite packages
tests/qtest/libqos/e1000e: Correctly group register accesses
tests/qtest/e1000e-test: De-duplicate constants
tests/qtest/libqos/e1000e: Remove "other" interrupts
hw: Include the VMWare devices only in the x86 targets
MAINTAINERS: Add documentation files to the corresponding sections
util/oslib-win32: Remove obsolete reference to g_poll code
util/qemu-config: Fix "query-command-line-options" to provide the right values
scripts/make-release: Only clone single branches to speed up the script
scripts/make-release: Add a simple help text for the script
monitor/misc: Remove superfluous include statements
target/s390x: The MVCP and MVCS instructions are not privileged
target/s390x/tcg/mem_helper: Test the right bits in psw_key_valid()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 15 Dec 2022 17:40:57 +0000 (17:40 +0000)]
Merge tag 'pull-target-arm-
20221215-1' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* hw/arm/virt: Add properties to allow more granular
configuration of use of highmem space
* target/arm: Add Cortex-A55 CPU
* hw/intc/arm_gicv3: Fix GICD_TYPER ITLinesNumber advertisement
* Implement FEAT_EVT
* Some 3-phase-reset conversions for Arm GIC, SMMU
* hw/arm/boot: set initrd with #address-cells type in fdt
* hw/misc: Move some arm-related files from specific_ss into softmmu_ss
* Restrict arm_cpu_exec_interrupt() to TCG accelerator
# gpg: Signature made Thu 15 Dec 2022 17:38:36 GMT
# gpg: using RSA key
E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-
20221215-1' of https://git.linaro.org/people/pmaydell/qemu-arm: (28 commits)
target/arm: Restrict arm_cpu_exec_interrupt() to TCG accelerator
hw/misc: Move some arm-related files from specific_ss into softmmu_ss
hw/arm/boot: set initrd with #address-cells type in fdt
hw/intc: Convert TYPE_KVM_ARM_ITS to 3-phase reset
hw/intc: Convert TYPE_ARM_GICV3_ITS to 3-phase reset
hw/intc: Convert TYPE_ARM_GICV3_ITS_COMMON to 3-phase reset
hw/intc: Convert TYPE_KVM_ARM_GICV3 to 3-phase reset
hw/intc: Convert TYPE_ARM_GICV3_COMMON to 3-phase reset
hw/intc: Convert TYPE_ARM_GIC_KVM to 3-phase reset
hw/intc: Convert TYPE_ARM_GIC_COMMON to 3-phase reset
hw/arm: Convert TYPE_ARM_SMMUV3 to 3-phase reset
hw/arm: Convert TYPE_ARM_SMMU to 3-phase reset
target/arm: Report FEAT_EVT for TCG '-cpu max'
target/arm: Implement HCR_EL2.TID4 traps
target/arm: Implement HCR_EL2.TICAB,TOCU traps
target/arm: Implement HCR_EL2.TTLBOS traps
target/arm: Implement HCR_EL2.TTLBIS traps
target/arm: Allow relevant HCR bits to be written for FEAT_EVT
hw/intc/arm_gicv3: Fix GICD_TYPER ITLinesNumber advertisement
target/arm: Add Cortex-A55 CPU
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Wed, 14 Dec 2022 14:27:14 +0000 (14:27 +0000)]
target/arm: Restrict arm_cpu_exec_interrupt() to TCG accelerator
When building with --disable-tcg on Darwin we get:
target/arm/cpu.c:725:16: error: incomplete definition of type 'struct TCGCPUOps'
cc->tcg_ops->do_interrupt(cs);
~~~~~~~~~~~^
Commit
083afd18a9 ("target/arm: Restrict cpu_exec_interrupt()
handler to sysemu") limited this block to system emulation,
but neglected to also limit it to TCG.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-id:
20221209110823.59495-1-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Thomas Huth [Wed, 14 Dec 2022 14:27:14 +0000 (14:27 +0000)]
hw/misc: Move some arm-related files from specific_ss into softmmu_ss
The header target/arm/kvm-consts.h checks CONFIG_KVM which is marked as
poisoned in common code, so the files that include this header have to
be added to specific_ss and recompiled for each, qemu-system-arm and
qemu-system-aarch64. However, since the kvm headers are only optionally
used in kvm-constants.h for some sanity checks, we can additionally
check the NEED_CPU_H macro first to avoid the poisoned CONFIG_KVM macro,
so kvm-constants.h can also be used from "common" files (without the
sanity checks - which should be OK since they are still done from other
target-specific files instead). This way, and by adjusting some other
include statements in the related files here and there, we can move some
files from specific_ss into softmmu_ss, so that they only need to be
compiled once during the build process.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20221202154023.293614-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Kevin Wolf [Wed, 7 Dec 2022 13:18:38 +0000 (14:18 +0100)]
block: GRAPH_RDLOCK for functions only called by co_wrappers
The generated coroutine wrappers already take care to take the lock in
the non-coroutine path, and assume that the lock is already taken in the
coroutine path.
The only thing we need to do for the wrapped function is adding the
GRAPH_RDLOCK annotation. Doing so also allows us to mark the
corresponding callbacks in BlockDriver as GRAPH_RDLOCK_PTR.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20221207131838.239125-19-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Wed, 7 Dec 2022 13:18:37 +0000 (14:18 +0100)]
block: use co_wrapper_mixed_bdrv_rdlock in functions taking the rdlock
Take the rdlock already, before we add the assertions.
All these functions either read the graph recursively, or call
BlockDriver callbacks that will eventually need to be protected by the
graph rdlock.
Do it now to all functions together, because many of these recursively
call each other.
For example, bdrv_co_truncate calls BlockDriver->bdrv_co_truncate, and
some driver callbacks implement their own .bdrv_co_truncate by calling
bdrv_flush inside. So if bdrv_flush asserts but bdrv_truncate does not
take the rdlock yet, the assertion will always fail.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20221207131838.239125-18-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Wed, 7 Dec 2022 13:18:36 +0000 (14:18 +0100)]
block-coroutine-wrapper.py: introduce annotations that take the graph rdlock
Add co_wrapper_bdrv_rdlock and co_wrapper_mixed_bdrv_rdlock option to
the block-coroutine-wrapper.py script.
This "_bdrv_rdlock" option takes and releases the graph rdlock when a
coroutine function is created.
This means that when used together with "_mixed", the function marked
with co_wrapper_mixed_bdrv_rdlock will support both coroutine and
non-coroutine case, and in the latter case it will create a coroutine
that takes and releases the rdlock. When called from a coroutine, the
caller must already hold the graph lock.
Example:
void co_wrapper_mixed_bdrv_rdlock bdrv_f1();
Becomes
static void bdrv_co_enter_f1()
{
bdrv_graph_co_rdlock();
bdrv_co_function();
bdrv_graph_co_rdunlock();
}
void bdrv_f1()
{
if (qemu_in_coroutine) {
assume_graph_lock();
bdrv_co_function();
} else {
qemu_co_enter(bdrv_co_enter_f1);
...
}
}
When used alone, the function will not work in coroutine context, and
when called in non-coroutine context it will create a new coroutine that
takes care of taking and releasing the rdlock automatically.
Example:
void co_wrapper_bdrv_rdlock bdrv_f1();
Becomes
static void bdrv_co_enter_f1()
{
bdrv_graph_co_rdlock();
bdrv_co_function();
bdrv_graph_co_rdunlock();
}
void bdrv_f1()
{
assert(!qemu_in_coroutine());
qemu_co_enter(bdrv_co_enter_f1);
...
}
About their usage:
- co_wrapper does not take the rdlock, so it can be used also outside
the block layer.
- co_wrapper_mixed will be used by many blk_* functions, since the
coroutine function needs to call blk_wait_while_drained() and
the rdlock *must* be taken afterwards, otherwise it's a deadlock.
In the future this annotation will go away, and blk_* will use
co_wrapper directly.
- co_wrapper_bdrv_rdlock will be used by BlockDriver callbacks, ideally
by all of them in the future.
- co_wrapper_mixed_bdrv_rdlock will be used by the remaining functions
that are still called by coroutine and non-coroutine context. In the
future this annotation will go away, as we will split such mixed
functions.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20221207131838.239125-17-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Wed, 7 Dec 2022 13:18:35 +0000 (14:18 +0100)]
Mark assert_bdrv_graph_readable/writable() GRAPH_RD/WRLOCK
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20221207131838.239125-16-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Wed, 7 Dec 2022 13:18:34 +0000 (14:18 +0100)]
graph-lock: TSA annotations for lock/unlock functions
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20221207131838.239125-15-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Wed, 7 Dec 2022 13:18:33 +0000 (14:18 +0100)]
block: assert that graph read and writes are performed correctly
Remove the old assert_bdrv_graph_writable, and replace it with
the new version using graph-lock API.
See the function documentation for more information.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20221207131838.239125-14-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Wed, 7 Dec 2022 13:18:32 +0000 (14:18 +0100)]
block: remove unnecessary assert_bdrv_graph_writable()
We don't protect bdrv->aio_context with the graph rwlock,
so these assertions are not needed
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20221207131838.239125-13-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Wed, 7 Dec 2022 13:18:31 +0000 (14:18 +0100)]
block: wrlock in bdrv_replace_child_noperm
Protect the main function where graph is modified.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20221207131838.239125-12-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Wed, 7 Dec 2022 13:18:30 +0000 (14:18 +0100)]
block: Fix locking in external_snapshot_prepare()
bdrv_img_create() polls internally (when calling bdrv_create(), which is
a co_wrapper), so it can't be called while holding the lock of any
AioContext except the current one without causing deadlocks. Drop the
lock around the call in external_snapshot_prepare().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20221207131838.239125-11-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Wed, 7 Dec 2022 13:18:29 +0000 (14:18 +0100)]
test-bdrv-drain: Fix incorrrect drain assumptions
The test case assumes that a drain only happens in one specific place
where it drains explicitly. This assumption happened to hold true until
now, but block layer functions may drain interally (any graph
modifications are going to do that through bdrv_graph_wrlock()), so this
is incorrect. Make sure that the test code in .drained_begin only runs
where we actually want it to run.
When scheduling a BH from .drained_begin, we also need to increase the
in_flight counter to make sure that the operation is actually completed
in time before the node that it works on goes away.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20221207131838.239125-10-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Wed, 7 Dec 2022 13:18:27 +0000 (14:18 +0100)]
clang-tsa: Add macros for shared locks
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20221207131838.239125-8-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Wed, 7 Dec 2022 13:18:26 +0000 (14:18 +0100)]
clang-tsa: Add TSA_ASSERT() macro
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20221207131838.239125-7-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Wed, 7 Dec 2022 13:18:25 +0000 (14:18 +0100)]
Import clang-tsa.h
This defines macros that allow clang to perform Thread Safety Analysis
based on function and variable annotations that specify the locking
rules. On non-clang compilers, the annotations are ignored.
Imported tsa.h from the original repository with the pthread_mutex_t
wrapper removed:
https://github.com/jhi/clang-thread-safety-analysis-for-c.git
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20221207131838.239125-6-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Wed, 7 Dec 2022 13:18:24 +0000 (14:18 +0100)]
async: Register/unregister aiocontext in graph lock list
Add/remove the AioContext in aio_context_list in graph-lock.c when it is
created/destroyed. This allows using the graph locking operations from
this AioContext.
In order to allow linking util/async.c with binaries that don't include
the block layer, introduce stubs for (un)register_aiocontext().
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20221207131838.239125-5-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Wed, 7 Dec 2022 13:18:23 +0000 (14:18 +0100)]
graph-lock: Implement guard macros
Similar to the implementation in lockable.h, implement macros to
automatically take and release the rdlock.
Create the empty GraphLockable and GraphLockableMainloop structs only to
use it as a type for G_DEFINE_AUTOPTR_CLEANUP_FUNC.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20221207131838.239125-4-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Wed, 7 Dec 2022 13:18:22 +0000 (14:18 +0100)]
graph-lock: Introduce a lock to protect block graph operations
Block layer graph operations are always run under BQL in the main loop.
This is proved by the assertion qemu_in_main_thread() and its wrapper
macro GLOBAL_STATE_CODE.
However, there are also concurrent coroutines running in other iothreads
that always try to traverse the graph. Currently this is protected
(among various other things) by the AioContext lock, but once this is
removed, we need to make sure that reads do not happen while modifying
the graph.
We distinguish between writer (main loop, under BQL) that modifies the
graph, and readers (all other coroutines running in various AioContext),
that go through the graph edges, reading ->parents and->children.
The writer (main loop) has "exclusive" access, so it first waits for any
current read to finish, and then prevents incoming ones from entering
while it has the exclusive access.
The readers (coroutines in multiple AioContext) are free to access the
graph as long the writer is not modifying the graph. In case it is, they
go in a CoQueue and sleep until the writer is done.
If a coroutine changes AioContext, the counter in the original and new
AioContext are left intact, since the writer does not care where the
reader is, but only if there is one.
As a result, some AioContexts might have a negative reader count, to
balance the positive count of the AioContext that took the lock. This
also means that when an AioContext is deleted it may have a nonzero
reader count. In that case we transfer the count to a global shared
counter so that the writer is always aware of all readers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20221207131838.239125-3-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Wed, 7 Dec 2022 13:18:21 +0000 (14:18 +0100)]
block: Factor out bdrv_drain_all_begin_nopoll()
Provide a separate function that just quiesces the users of a node to
prevent new requests from coming in, but without waiting for the already
in-flight I/O to complete.
This function can be used in contexts where polling is not allowed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20221207131838.239125-2-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Mon, 28 Nov 2022 14:23:37 +0000 (09:23 -0500)]
block/dirty-bitmap: convert coroutine-only functions to co_wrapper
bdrv_can_store_new_dirty_bitmap and bdrv_remove_persistent_dirty_bitmap
check if they are running in a coroutine, directly calling the
coroutine callback if it's the case.
Except that no coroutine calls such functions, therefore that check
can be removed, and function creation can be offloaded to
c_w.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <
20221128142337.657646-15-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Mon, 28 Nov 2022 14:23:36 +0000 (09:23 -0500)]
block: convert bdrv_create to co_wrapper
This function is never called in coroutine context, therefore
instead of manually creating a new coroutine, delegate it to the
block-coroutine-wrapper script, defining it as co_wrapper.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <
20221128142337.657646-14-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Mon, 28 Nov 2022 14:23:35 +0000 (09:23 -0500)]
block-coroutine-wrapper.py: support also basic return types
Extend the regex to cover also return type, pointers included.
This implies that the value returned by the function cannot be
a simple "int" anymore, but the custom return type.
Therefore remove poll_state->ret and instead use a per-function
custom "ret" field.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <
20221128142337.657646-13-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Mon, 28 Nov 2022 14:23:34 +0000 (09:23 -0500)]
block-coroutine-wrapper.py: support functions without bs arg
Right now, we take the first parameter of the function to get the
BlockDriverState to pass to bdrv_poll_co(), that internally calls
functions that figure in which aiocontext the coroutine should run.
However, it is useless to pass a bs just to get its own AioContext,
so instead pass it directly, and default to the main loop if no
BlockDriverState is passed as parameter.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <
20221128142337.657646-12-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Mon, 28 Nov 2022 14:23:33 +0000 (09:23 -0500)]
block-coroutine-wrapper.py: introduce co_wrapper
This new annotation starts just a function wrapper that creates
a new coroutine. It assumes the caller is not a coroutine.
It will be the default annotation to be used in the future.
This is much better as c_w_mixed, because it is clear if the caller
is a coroutine or not, and provides the advantage of automating
the code creation. In the future all c_w_mixed functions will be
substituted by co_wrapper.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <
20221128142337.657646-11-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Mon, 28 Nov 2022 14:23:32 +0000 (09:23 -0500)]
block: rename generated_co_wrapper in co_wrapper_mixed
In preparation to the incoming new function specifiers,
rename g_c_w with a more meaningful name and document it.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <
20221128142337.657646-10-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Mon, 28 Nov 2022 14:23:31 +0000 (09:23 -0500)]
block: bdrv_create_file is a coroutine_fn
It is always called in coroutine_fn callbacks, therefore
it can directly call bdrv_co_create().
Rename it to bdrv_co_create_file too.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <
20221128142337.657646-9-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Mon, 28 Nov 2022 14:23:30 +0000 (09:23 -0500)]
block: distinguish between bdrv_create running in coroutine and not
Call two different functions depending on whether bdrv_create
is in coroutine or not, following the same pattern as
generated_co_wrapper functions.
This allows to also call the coroutine function directly,
without using CreateCo or relying in bdrv_create().
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <
20221128142337.657646-8-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Mon, 28 Nov 2022 14:23:29 +0000 (09:23 -0500)]
block: avoid duplicating filename string in bdrv_create
We know that the string will stay around until the function
returns, and the parameter of drv->bdrv_co_create_opts is const char*,
so it must not be modified either.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <
20221128142337.657646-7-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Mon, 28 Nov 2022 14:23:28 +0000 (09:23 -0500)]
block/vmdk: add coroutine_fn annotations
These functions end up calling bdrv_create() implemented as generated_co_wrapper
functions.
In addition, they also happen to be always called in coroutine context,
meaning all callers are coroutine_fn.
This means that the g_c_w function will enter the qemu_in_coroutine()
case and eventually suspend (or in other words call qemu_coroutine_yield()).
Therefore we can mark such functions coroutine_fn too.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <
20221128142337.657646-6-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Mon, 28 Nov 2022 14:23:27 +0000 (09:23 -0500)]
block-backend: replace bdrv_*_above with blk_*_above
Avoid mixing bdrv_* functions with blk_*, so create blk_* counterparts
for bdrv_block_status_above and bdrv_is_allocated_above.
Note that since blk_co_block_status_above only calls the g_c_w function
bdrv_common_block_status_above and is marked as coroutine_fn, call
directly bdrv_co_common_block_status_above() to avoid using a g_c_w.
Same applies to blk_co_is_allocated_above.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <
20221128142337.657646-5-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Mon, 28 Nov 2022 14:23:26 +0000 (09:23 -0500)]
nbd/server.c: add coroutine_fn annotations
These functions end up calling bdrv_*() implemented as generated_co_wrapper
functions.
In addition, they also happen to be always called in coroutine context,
meaning all callers are coroutine_fn.
This means that the g_c_w function will enter the qemu_in_coroutine()
case and eventually suspend (or in other words call qemu_coroutine_yield()).
Therefore we can mark such functions coroutine_fn too.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <
20221128142337.657646-4-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>