OSDN Git Service
Leonid V. Fedorenchik [Sat, 22 Oct 2011 04:43:29 +0000 (01:43 -0300)]
[media] cx25821-audio.h: Fix multiline defines
Change column of line continuation character ('\') and fix indent of
multiline defines.
Also line up remaining constant defines.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Leonid V. Fedorenchik [Sat, 22 Oct 2011 04:43:28 +0000 (01:43 -0300)]
[media] cx25821-audio.h: Line up defines
Line up defines to the same column.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Leonid V. Fedorenchik [Sat, 22 Oct 2011 04:43:27 +0000 (01:43 -0300)]
[media] cx25821-audio-upstream.c: Change line endings
Change obscure line endings to less obscure ones. (improve readability)
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Leonid V. Fedorenchik [Sat, 22 Oct 2011 04:43:26 +0000 (01:43 -0300)]
[media] cx25821-audio-upstream.c: Move operators
Move operator of complex expression to the end of the lines to preserve
consistency.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Leonid V. Fedorenchik [Sat, 22 Oct 2011 04:43:25 +0000 (01:43 -0300)]
[media] cx25821-audio-upstream.c: Fix indent
Change wrong indent (with spaces and less than 7 columns) of statements
to tabs.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Leonid V. Fedorenchik [Sat, 22 Oct 2011 04:43:24 +0000 (01:43 -0300)]
[media] cx25821-alsa.c: Change line endings
Change obscure line endings to less obscure ones. (improve readability)
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Leonid V. Fedorenchik [Sat, 22 Oct 2011 04:43:23 +0000 (01:43 -0300)]
[media] cx25821-alsa.c: Fix indent
Delete unnecessary space before indented statement.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Leonid V. Fedorenchik [Sat, 22 Oct 2011 04:43:22 +0000 (01:43 -0300)]
[media] cx25821-alsa.c: Add braces to else clause
Add curly braces around else clause because corresponding if has them.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Leonid V. Fedorenchik [Sat, 22 Oct 2011 04:43:21 +0000 (01:43 -0300)]
[media] cx25821-alsa.c: Line up comments
Line up comments to the same column.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Axel Lin [Wed, 16 Nov 2011 08:14:03 +0000 (05:14 -0300)]
[media] media/radio/tef6862: fix checking return value of i2c_master_send
i2c_master_send returns negative errno, or else the number of bytes written.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ben Hutchings [Wed, 16 Nov 2011 04:54:04 +0000 (01:54 -0300)]
[media] staging: lirc_serial: Do not assume error codes returned by request_irq()
lirc_serial_probe() must fail if request_irq() returns an error, even if
it isn't EBUSY or EINVAL,
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ben Hutchings [Wed, 16 Nov 2011 04:53:35 +0000 (01:53 -0300)]
[media] staging: lirc_serial: Fix bogus error codes
Device not found? ENODEV, not EINVAL.
Write to read-only device? EPERM, not EBADF.
Invalid argument? EINVAL, not ENOSYS.
Unsupported ioctl? ENOIOCTLCMD, not ENOSYS.
Another function returned an error code? Use that, don't replace it.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ben Hutchings [Wed, 16 Nov 2011 04:53:25 +0000 (01:53 -0300)]
[media] staging: lirc_serial: Fix deadlock on resume failure
A resume function cannot remove the device it is resuming!
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ben Hutchings [Wed, 16 Nov 2011 04:52:11 +0000 (01:52 -0300)]
[media] staging: lirc_serial: Free resources on failure paths of lirc_serial_probe()
Failure to allocate the I/O region leaves the IRQ allocated.
A later failure leaves them both allocated.
Reported-by: Torsten Crass <torsten.crass@eBiology.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ben Hutchings [Wed, 16 Nov 2011 04:49:41 +0000 (01:49 -0300)]
[media] staging: lirc_serial: Fix init/exit order
Currently the module init function registers a platform_device and
only then allocates its IRQ and I/O region. This allows allocation to
race with the device's suspend() function. Instead, allocate
resources in the platform driver's probe() function and free them in
the remove() function.
The module exit function removes the platform device before the
character device that provides access to it. Change it to reverse the
order of initialisation.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 14 Nov 2011 17:20:49 +0000 (14:20 -0300)]
[media] board-dm646x-evm.c: wrong register used in setup_vpif_input_channel_mode
The function setup_vpif_input_channel_mode() used the VSCLKDIS register
instead of VIDCLKCTL. This meant that when in HD mode videoport channel 0
used a different clock from channel 1.
Clearly a copy-and-paste error.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 13 Nov 2011 18:55:18 +0000 (15:55 -0300)]
[media] ce168: remove experimental from Kconfig
I have been working many years without problems.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 13 Nov 2011 18:53:04 +0000 (15:53 -0300)]
[media] ce6230: remove experimental from Kconfig
I have been working many years without problems.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 13 Nov 2011 18:21:58 +0000 (15:21 -0300)]
[media] cxd2820r: check bandwidth earlier for DVB-T/T2
It is param that could be potentially unsupported and
due to that it is good idea to check it very first.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 13 Nov 2011 17:41:25 +0000 (14:41 -0300)]
[media] cxd2820r: switch to .get_if_frequency()
All tuners used with cxd2820r offers IF frequency so switch that.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 13 Nov 2011 14:22:58 +0000 (11:22 -0300)]
[media] tda18212: round IF frequency to close hardware value
Chip configures IF frequency resolution of 50 kHz. Round it nearest.
Off-by 50 kHz is almost nothing in real life...
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 13 Nov 2011 14:20:08 +0000 (11:20 -0300)]
[media] tda18212: implement .get_if_frequency()
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 13 Nov 2011 04:07:42 +0000 (01:07 -0300)]
[media] qt1010: implement .get_if_frequency()
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 13 Nov 2011 03:44:57 +0000 (00:44 -0300)]
[media] mt2060: implement .get_if_frequency()
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 13 Nov 2011 03:26:17 +0000 (00:26 -0300)]
[media] af9013: use .get_if_frequency() when possible
Get IF frequency from tuner if tuner provides it.
Remove TDA18271 and TDA18218 IF frequency hacks since both tuners provides .get_if_frequency().
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 13 Nov 2011 03:19:56 +0000 (00:19 -0300)]
[media] tda18218: implement .get_if_frequency()
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Paul Bolle [Sun, 13 Nov 2011 15:16:40 +0000 (12:16 -0300)]
[media] Fix typos in VIDEO_CX231XX_DVB Kconfig entry
Commit
ede676c72d ("[...] add digital support for PV SBTVD hybrid")
added "select MEDIA_TUNER_NXP18271" to the VIDEO_CX231XX_DVB Kconfig
entry. But there's no Kconfig symbol MEDIA_TUNER_NXP18271. That should
have been MEDIA_TUNER_TDA18271. (The code added in that commit uses
tda18271_attach, which is only available if MEDIA_TUNER_TDA18271 is
set.)
The selects of MEDIA_TUNER_XC5000 and MEDIA_TUNER_TDA18271 should only
be done if MEDIA_TUNER_CUSTOMISE isn't set.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Heungjun Kim [Fri, 11 Nov 2011 11:05:33 +0000 (08:05 -0300)]
[media] MAINTAINERS: Add m5mols driver maintainers
Add the maintainers for the m5mols driver
Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alfredo Jesús Delaiti [Wed, 9 Nov 2011 18:13:00 +0000 (15:13 -0300)]
[media] cx23885: add support for Mygica X8507
This patch supports card Mygica X8507 (analog part)
This controller is a copy of driver card Mygica X8506
This patch depends on patch cx23885-alsa
To do: FM, ISDB-t, remote control, audio for composite1, S-Video and
video component.
Signed-off-by: Alfredo J. Delaiti <alfredodelaiti@netscape.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean Delvare [Wed, 9 Nov 2011 16:27:53 +0000 (13:27 -0300)]
[media] video: Drop undue references to i2c-algo-bit
There's one comment that has been copied from bttv to many other
media/video drivers:
/* init + register i2c algo-bit adapter */
Meanwhile, many drivers use hardware I2C implementations instead of
relying on i2c-algo-bit, so this comment is misleading. Remove the
reference to "algo-bit" from all drivers, to avoid any confusion. This
is the best way to ensure that the comments won't go out of sync
again. Anyone interested in the implementation details would rather
look at the code itself.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 24 Nov 2011 17:04:18 +0000 (15:04 -0200)]
[media] firedtv-avc: Fix compilation warnings
drivers/media/dvb/firewire/firedtv-avc.c: In function ‘avc_tuner_tuneqpsk’:
drivers/media/dvb/firewire/firedtv-avc.c:394:4: warning: enumeration value ‘ROLLOFF_15’ not handled in switch [-Wswitch]
drivers/media/dvb/firewire/firedtv-avc.c:394:4: warning: enumeration value ‘ROLLOFF_13’ not handled in switch [-Wswitch]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 24 Nov 2011 17:01:45 +0000 (15:01 -0200)]
[media] em28xx: Fix a few warnings due to HVR-930C addition
drivers/media/video/em28xx/em28xx-cards.c:339:30: warning: ‘hauppauge_930c_gpio’ defined but not used [-Wunused-variable]
drivers/media/video/em28xx/em28xx-dvb.c: In function ‘em28xx_dvb_init’:
drivers/media/video/em28xx/em28xx-dvb.c:886:3: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Tue, 8 Nov 2011 22:16:04 +0000 (19:16 -0300)]
[media] staging: as102: Add missing function argument
Add missing dev argument in dev_err() call to correct an error
introduced in commit
880102898f19cf9f9ba36dc9d838b5476645ce00
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andrew Vincer [Tue, 8 Nov 2011 15:43:45 +0000 (12:43 -0300)]
[media] rc: Fix input deadlock and transmit error in redrat3 driver
Fixed submit urb logic so hardware doesn't hang trying to transmit
signal data
Removed unneeded enable/disable detector commands in
redrat3_transmit_ir (the hardware does this anyway) and converted
arguments to unsigned as per
5588dc2
Signed-off-by: Andrew Vincer <andrew@redrat.co.uk>
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Tue, 18 Oct 2011 05:12:09 +0000 (02:12 -0300)]
[media] av7110: wrong limiter in av7110_start_feed()
Smatch complains that the wrong limiter is used here:
drivers/media/dvb/ttpci/av7110.c +906 dvb_feed_start_pid(12)
error: buffer overflow 'npids' 5 <= 19
Here is the problem code:
905 i = dvbdmxfeed->pes_type;
906 npids[i] = (pid[i]&0x8000) ? 0 : pid[i];
"npids" is a 5 element array declared on the stack. If
dvbdmxfeed->pes_type is more than 4 we probably put a (u16)0 past
the end of the array.
If dvbdmxfeed->pes_type is over 4 the rest of the function doesn't
do anything. dvbdmxfeed->pes_type is capped at less than
DMX_TS_PES_OTHER (20) in the caller function, but I changed it to
less than or equal to DMX_TS_PES_PCR (4).
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jose Alberto Reguero [Sun, 16 Oct 2011 10:36:57 +0000 (07:36 -0300)]
[media] TT CT-3650 i2c fix
This patch fix a bug in the i2c code of ttusb2 driver.
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Thu, 24 Nov 2011 11:47:51 +0000 (08:47 -0300)]
[media] ir-sanyo-decoder.c doesn't compile
I get this error when compiling for_v3.3:
There is a include <linux/module.h> missing.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Mon, 7 Nov 2011 17:44:12 +0000 (14:44 -0300)]
[media] V4L: mt9t112: use after free in mt9t112_probe()
priv gets dereferenced in mt9t112_set_params() so we should return
before calling that.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
lawrence rust [Mon, 31 Oct 2011 11:39:32 +0000 (08:39 -0300)]
[media] ir-rc6-decoder: Support RC6-6A variable length data
This patch to the IR RC6 decoder adds support for variable length
mode-6A frames which can range in size from 8 to 128 bits. Please refer
to the following link for a detailed explanation or RC6 frames:
http://slydiman.narod.ru/scr/kb/rc6.htm
This change removes the assumption that frames are fixed length
(currently either 24 or 32 data bits) and actually counts the number of
bits until an end of frame marker is seen.
[mchehab@redhat.com: Tested with a RC-6(0) IR - 16 bits]
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 23 Nov 2011 21:42:09 +0000 (19:42 -0200)]
Merge tag 'v3.2-rc2' into staging/for_v3.3
* tag 'v3.2-rc2': (3068 commits)
Linux 3.2-rc2
hfs: add sanity check for file name length
fsl-rio: fix compile error
blackfin: Fixup export.h includes
Blackfin: add serial TX IRQ in individual platform resource
virtio-pci: fix use after free
ACPI / cpuidle: Remove acpi_idle_suspend (to fix suspend regression)
drm/radeon/kms/combios: fix dynamic allocation of PM clock modes
[CPUFREQ] db8500: fix build error due to undeclared i variable
bma023: Add SFI translation for this device
vrtc: change its year offset from 1960 to 1972
ce4100: fix a build error
arm/imx: fix imx6q mmc error when mounting rootfs
arm/imx: fix AUTO_ZRELADDR selection
arm/imx: fix the references to ARCH_MX3
ARM: mx51/53: set pwm clock parent to ipg_perclk
btrfs: rename the option to nospace_cache
drm/radeon/kms/pm: switch to dynamically allocating clock mode array
drm/radeon/kms: optimize r600_pm_profile_init
drm/radeon/kms/pm: add a proper pm profile init function for fusion
...
Conflicts:
drivers/media/radio/Kconfig
Mauro Carvalho Chehab [Wed, 23 Nov 2011 15:04:08 +0000 (12:04 -0300)]
[media] rc: Add support for decoding Sanyo protocol
This protocol is found on Sanyo/Aiwa remotes.
Tested with an Aiwa RC-7AS06 remote control.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 23 Nov 2011 15:03:32 +0000 (12:03 -0300)]
[media] ir-nec-decoder: Report what bit failed at debug msg
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Eddi De Pieri [Mon, 21 Nov 2011 09:43:52 +0000 (06:43 -0300)]
[media] get_dvb_firmware: add support for HVR-930C firmware
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 20 Nov 2011 14:16:25 +0000 (12:16 -0200)]
[media] em28xx: Add IR support for HVR-930C
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 20 Nov 2011 14:23:54 +0000 (12:23 -0200)]
[media] em28xx: Add IR support for em2884
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 20 Nov 2011 13:23:24 +0000 (11:23 -0200)]
[media] em28xx: Fix CodingStyle issues introduced by changeset
82e7dbb
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Eddi De Pieri [Sat, 19 Nov 2011 14:37:14 +0000 (11:37 -0300)]
[media] em28xx: initial support for HAUPPAUGE HVR-930C again
With this patch I try again to add initial support for HVR930C.
Tested only DVB-T, since in Italy Analog service is stopped.
Actually "scan -a0 -f1", find only about 50 channel while 400 should
be available.
[mchehab@redhat.com: Tested with DVB-C and fixed a few whitespace issues]
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 23 Sep 2011 16:03:42 +0000 (13:03 -0300)]
[media] xc5000: Add support for get_if_frequency
This is needed for devices with DRX-K and xc5000.
Tested with a HVR 930C hardware.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 16 Nov 2011 16:38:28 +0000 (14:38 -0200)]
[media] em28xx: Fix some Terratec entries (H5 and XS)
As reported by Andreas Oberritter <obi@linuxtv.org>, changeset
33ba28eebc3e1758e6adc1fcec9e1e3151bac453 did the wrong thing.
Fix it to properly reflect the entries for Terratec H5 revs 1 and 2,
and restore Terratec XS entry.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Linus Torvalds [Tue, 15 Nov 2011 17:02:59 +0000 (15:02 -0200)]
Linux 3.2-rc2
Linus Torvalds [Tue, 15 Nov 2011 16:56:56 +0000 (14:56 -0200)]
Merge branch 'iommu/fixes' of git://git./linux/kernel/git/joro/iommu
* 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: omap: Fix compile failure
Linus Torvalds [Tue, 15 Nov 2011 16:48:51 +0000 (14:48 -0200)]
Merge branch 'fixes' of git://git.linaro.org/people/triad/linux-pinctrl
* 'fixes' of git://git.linaro.org/people/triad/linux-pinctrl:
pinctrl: hide subsystem from the populace
pinctrl: fix "warning: 'struct pinctrl_dev' declared inside parameter list"
Linus Torvalds [Tue, 15 Nov 2011 16:47:28 +0000 (14:47 -0200)]
Merge branch 'for-linus' of git://git./linux/kernel/git/paulg/linux
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
fsl-rio: fix compile error
Linus Torvalds [Tue, 15 Nov 2011 16:45:50 +0000 (14:45 -0200)]
Merge branch 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6
* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6:
gpio: pca953x: propagate the errno from the chip_init functions
gpio: pca953x: remove unneeded check for chip type
gpio/omap: check return value from irq_alloc_generic_chip
gpio/omap: replace MOD_REG_BIT macro with static inline
Linus Torvalds [Tue, 15 Nov 2011 16:31:12 +0000 (14:31 -0200)]
Merge branch 'for-linus' of git://git./linux/kernel/git/lliubbo/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin:
blackfin: Fixup export.h includes
Blackfin: add serial TX IRQ in individual platform resource
Dan Carpenter [Mon, 14 Nov 2011 14:52:08 +0000 (17:52 +0300)]
hfs: add sanity check for file name length
On a corrupted file system the ->len field could be wrong leading to
a buffer overflow.
Reported-and-acked-by: Clement LECIGNE <clement.lecigne@netasq.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Liu Gang [Fri, 11 Nov 2011 13:48:28 +0000 (21:48 +0800)]
fsl-rio: fix compile error
The "#include <linux/module.h>" was replaced by "#include <linux/export.h>"
in the patch "powerpc: various straight conversions from module.h --> export.h".
This will cause the following compile problem:
arch/powerpc/sysdev/fsl_rio.c: In function 'fsl_rio_mcheck_exception':
arch/powerpc/sysdev/fsl_rio.c:296: error: implicit declaration of function 'search_exception_tables'.
The file fsl_rio.c needs the declaration of function "search_exception_tables"
in the header file "linux/module.h".
Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Lars-Peter Clausen [Fri, 11 Nov 2011 10:06:38 +0000 (11:06 +0100)]
blackfin: Fixup export.h includes
Commit
8dc7a9c84 ("blackfin: Add export.h to files using
EXPORT_SYMBOL/THIS_MODULE") inserted some of the include statements into
sections protected by an unrelated #if CONFIG_... statement. This can cause,
depending on the configuration used, warnings like this one:
arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: data definition has no type or storage class
arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’
arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: parameter names (without types) in function declaration
This patch fixes it by moving the includes out of the #if protected sections.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Sonic Zhang [Mon, 1 Aug 2011 09:53:21 +0000 (17:53 +0800)]
Blackfin: add serial TX IRQ in individual platform resource
The serial TX IRQ is not simply (RX IRQ + 1) on some Blackfin chips,
so move the values to the platform resources.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Linus Torvalds [Mon, 14 Nov 2011 08:47:04 +0000 (06:47 -0200)]
Merge branch 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-sh
* 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-sh:
ARM: mach-shmobile: cpuidle single/global and last_state fixes
ARM: mach-shmobile: move helper macro PORTCR to sh_pfc.h
ARM: mach-shmobile: move helper macro PORT_xx to sh_pfc.h
ARM: mach-shmobile: move helper macro PORT_DATA_xx to sh_pfc.h
ARM: mach-shmobile: ap4evb: remove white space from end of line
ARM: mach-shmobile: clock-sh7372: remove un-necessary index
ARM: mach-shmobile: kota2: add comment out separator
ARM: mach-shmobile: sh73a0: add MMC data pin pull-up
Linus Torvalds [Mon, 14 Nov 2011 08:45:30 +0000 (06:45 -0200)]
Merge branch 'sh-fixes-for-linus' of git://github.com/pmundt/linux-sh
* 'sh-fixes-for-linus' of git://github.com/pmundt/linux-sh:
mailmap: Fix up some renesas attributions
sh: clkfwk: Kill off remaining debugfs cruft.
drivers: sh: Kill off dead pathname for runtime PM stub.
drivers: sh: Generalize runtime PM platform stub.
sh: Wire up process_vm syscalls.
sh: clkfwk: add clk_rate_mult_range_round()
serial: sh-sci: Fix up SH-2A SCIF support.
sh: Fix cached/uncaced address calculation in 29bit mode
Linus Torvalds [Mon, 14 Nov 2011 06:00:01 +0000 (04:00 -0200)]
Merge git://github.com/rustyrussell/linux
* git://github.com/rustyrussell/linux:
virtio-pci: fix use after free
Michael S. Tsirkin [Mon, 7 Nov 2011 16:37:05 +0000 (18:37 +0200)]
virtio-pci: fix use after free
Commit
31a3ddda166cda86d2b5111e09ba4bda5239fae6 introduced
a use after free in virtio-pci. The main issue is
that the release method signals removal of the virtio device,
while remove signals removal of the pci device.
For example, on driver removal or hot-unplug,
virtio_pci_release_dev is called before virtio_pci_remove.
We then might get a crash as virtio_pci_remove tries to use the
device freed by virtio_pci_release_dev.
We allocate/free all resources together with the
pci device, so we can leave the release method empty.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
Linus Torvalds [Sun, 13 Nov 2011 19:09:55 +0000 (17:09 -0200)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon/kms/combios: fix dynamic allocation of PM clock modes
Rafael J. Wysocki [Sat, 12 Nov 2011 22:17:27 +0000 (23:17 +0100)]
ACPI / cpuidle: Remove acpi_idle_suspend (to fix suspend regression)
After commit
e978aa7d7d57 ("cpuidle: Move dev->last_residency update to
driver enter routine; remove dev->last_state") setting acpi_idle_suspend
to 1 by acpi_processor_suspend() causes the ACPI cpuidle routines to
return error codes continuously, which in turn causes cpuidle to lock up
(hard).
However, acpi_idle_suspend doesn't appear to be useful for any
particular purpose (it's racy and doesn't really provide any real
protection), so it can be removed, which makes the problem go away.
Reported-and-tested-by: Tomas M. <tmezzadra@gmail.com>
Reported-and-tested-by: Ferenc Wagner <wferi@niif.hu>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alex Deucher [Sat, 12 Nov 2011 16:57:29 +0000 (11:57 -0500)]
drm/radeon/kms/combios: fix dynamic allocation of PM clock modes
I missed the combios path when I updated the atombios pm code.
Reported by amarsh04 on IRC.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Sat, 12 Nov 2011 15:29:04 +0000 (13:29 -0200)]
Merge branch 'fixes' of git://git./linux/kernel/git/arm/arm-soc
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm/imx: fix imx6q mmc error when mounting rootfs
arm/imx: fix AUTO_ZRELADDR selection
arm/imx: fix the references to ARCH_MX3
ARM: mx51/53: set pwm clock parent to ipg_perclk
arm/tegra: enable headphone detection gpio on seaboard
arm/dt: Fix ventana SDHCI power-gpios
arm/tegra: Don't create duplicate gpio and pinmux devices
ARM: at91: Fix USBA gadget registration
atmel/spi: fix missing probe
at91/yl-9200: Fix section mismatch
at91: vmalloc fix missing AT91_VIRT_BASE define
ARM: at91: usart: drop static map regs for dbgu
ARM: picoxcell: add extra temp register to addruart
ARM: msm: fix compilation flags for MSM_SCM
arm/mxs: fix mmc device adding for mach-mx28evk
ARM: mxc: Remove test_for_ltirq
ARM:i.MX: fix build error in clock-mx51-mx53.c
ARM:i.MX: fix build error in tzic/avic.c
ARM: mxc: fix local timer interrupt handling
msm: boards: Fix fallout from removal of machine_desc in fixup
Axel Lin [Fri, 4 Nov 2011 12:04:41 +0000 (20:04 +0800)]
[CPUFREQ] db8500: fix build error due to undeclared i variable
The variable i is removed by commit
ded8433
"[CPUFREQ] db8500: remove unneeded for loop iteration over freq_table",
but current code to print available frequencies still uses the i variable.
Thus add the i variable back to fix below buld error:
CC drivers/cpufreq/db8500-cpufreq.o
drivers/cpufreq/db8500-cpufreq.c: In function 'db8500_cpufreq_init':
drivers/cpufreq/db8500-cpufreq.c:123: error: 'i' undeclared (first use in this function)
drivers/cpufreq/db8500-cpufreq.c:123: error: (Each undeclared identifier is reported only once
drivers/cpufreq/db8500-cpufreq.c:123: error: for each function it appears in.)
make[2]: *** [drivers/cpufreq/db8500-cpufreq.o] Error 1
make[1]: *** [drivers/cpufreq] Error 2
make: *** [drivers] Error 2
This patch also fixes using uninitialized i variable as array index.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dave Jones <davej@redhat.com>
Linus Torvalds [Sat, 12 Nov 2011 02:04:51 +0000 (00:04 -0200)]
Merge branch 'for-linus' of git://git./linux/kernel/git/geert/linux-m68k
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (29 commits)
m68k/mac: Remove mac_irq_{en,dis}able() wrappers
m68k/irq: Remove obsolete support for user vector interrupt fixups
m68k/irq: Remove obsolete m68k irq framework
m68k/q40: Convert Q40/Q60 to genirq
m68k/sun3: Convert Sun3/3x to genirq
m68k/sun3: Use the kstat_irqs_cpu() wrapper
m68k/apollo: Convert Apollo to genirq
m68k/vme: Convert VME to genirq
m68k/hp300: Convert HP9000/300 and HP9000/400 to genirq
m68k/mac: Optimize interrupts using chain handlers
m68k/mac: Convert Mac to genirq
m68k/amiga: Optimize interrupts using chain handlers
m68k/amiga: Convert Amiga to genirq
m68k/amiga: Refactor amiints.c
m68k/atari: Remove code and comments about different irq types
m68k/atari: Convert Atari to genirq
m68k/irq: Add genirq support
m68k/irq: Remove obsolete IRQ_FLG_* users
m68k/irq: Rename {,__}m68k_handle_int()
m68k/irq: Add m68k_setup_irq_controller()
...
Linus Torvalds [Sat, 12 Nov 2011 02:03:50 +0000 (00:03 -0200)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-media
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] v4l2-ctrl: Send change events to all fh for auto cluster slave controls
[media] v4l2-event: Don't set sev->fh to NULL on unsubscribe
[media] v4l2-event: Remove pending events from fh event queue when unsubscribing
[media] v4l2-event: Deny subscribing with a type of V4L2_EVENT_ALL
[media] MAINTAINERS: add a maintainer for s5p-mfc driver
[media] v4l: s5p-mfc: fix reported capabilities
[media] media: vb2: reset queued list on REQBUFS(0) call
[media] media: vb2: set buffer length correctly for all buffer types
[media] media: vb2: add a check for uninitialized buffer
[media] mxl111sf: fix build warning
[media] mxl111sf: remove pointless if condition in mxl111sf_config_spi
[media] mxl111sf: check for errors after mxl111sf_write_reg in mxl111sf_idac_config
[media] mxl111sf: fix return value of mxl111sf_idac_config
[media] uvcvideo: GET_RES should only be checked for BITMAP type menu controls
Linus Torvalds [Sat, 12 Nov 2011 02:01:51 +0000 (00:01 -0200)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/kvm: Fix build failure with HV KVM and CBE
powerpc/ps3: Fix lv1_gpu_attribute hcall
powerpc/ps3: Fix PS3 repository build warnings
powerpc/ps3: irq: Remove IRQF_DISABLED
powerpc/irq: Remove IRQF_DISABLED
powerpc/numa: NUMA topology support for PowerNV
powerpc: Add System RAM to /proc/iomem
powerpc: Add KVM as module to defconfigs
powerpc/kvm: Fix build with older toolchains
powerpc, tqm5200: update tqm5200_defconfig to fit for charon board.
powerpc/5200: add support for charon board
Linus Torvalds [Sat, 12 Nov 2011 01:59:40 +0000 (23:59 -0200)]
Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Fix missing system calls check on mips.
William Douglas [Thu, 10 Nov 2011 13:50:38 +0000 (13:50 +0000)]
bma023: Add SFI translation for this device
This needed the sfi IRQ 0xFF fix to go in first. It simply plumbs in the
bma023 driver with the firmware naming of it.
Signed-off-by: William Douglas <william.douglas@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Feng Tang [Thu, 10 Nov 2011 13:23:39 +0000 (13:23 +0000)]
vrtc: change its year offset from 1960 to 1972
Real world year equals the value in vrtc YEAR register plus an offset.
We used 1960 as the offset to make leap year consistent, but for a
device's first use, its YEAR register is 0 and the system year will
be parsed as 1960 which is not a valid UNIX time and will cause many
applications to fail mysteriously. So we use 1972 instead to fix this
issue.
Updated patch which adds a sanity check suggested by Mathias
This isn't a change in behaviour for systems, because 1972 is the one we
actually use. It's the old version in upstream which is out of sync with
all devices.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhang Rui [Thu, 10 Nov 2011 13:21:10 +0000 (13:21 +0000)]
ce4100: fix a build error
Fix a build error. CE4100 with no serial errors because the alternate
function is only a prototype not a null function as intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 12 Nov 2011 01:55:01 +0000 (23:55 -0200)]
Merge branch 'upstream-linus' of git://github.com/jgarzik/libata-dev
* 'upstream-linus' of git://github.com/jgarzik/libata-dev:
pata_of_platform: Don't use NO_IRQ
[libata] ahci: Add ASMedia ASM1061 support
[libata] Issue SRST to Sil3726 PMP
sata_sis.c: trivial spelling fix
ahci_platform: use dev_get_platdata()
[libata] libata-scsi.c: Add function parameter documentation
Linus Torvalds [Sat, 12 Nov 2011 01:47:06 +0000 (23:47 -0200)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: rename the option to nospace_cache
Btrfs: handle bio_add_page failure gracefully in scrub
Btrfs: fix deadlock caused by the race between relocation
Btrfs: only map pages if we know we need them when reading the space cache
Btrfs: fix orphan backref nodes
Btrfs: Abstract similar code for btrfs_block_rsv_add{, _noflush}
Btrfs: fix unreleased path in btrfs_orphan_cleanup()
Btrfs: fix no reserved space for writing out inode cache
Btrfs: fix nocow when deleting the item
Btrfs: tweak the delayed inode reservations again
Btrfs: rework error handling in btrfs_mount()
Btrfs: close devices on all error paths in open_ctree()
Btrfs: avoid null dereference and leaks when bailing from open_ctree()
Btrfs: fix subvol_name leak on error in btrfs_mount()
Btrfs: fix memory leak in btrfs_parse_early_options()
Btrfs: fix our reservations for updating an inode when completing io
Btrfs: fix oops on NULL trans handle in btrfs_truncate
btrfs: fix double-free 'tree_root' in 'btrfs_mount()'
Linus Torvalds [Sat, 12 Nov 2011 01:45:42 +0000 (23:45 -0200)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Use kmemdup rather than duplicating its implementation
ALSA: hda - Re-enable the check NO_PRESENCE misc bit
ALSA: vmaster - Free slave-links when freeing the master element
ALSA: hda - Don't add elements of other codecs to vmaster slave
ALSA: intel8x0: improve virtual environment detection
ALSA: intel8x0: move virtual environment detection code into one place
ALSA: snd_usb_audio: add Logitech HD Webcam c510 to quirk-384
ALSA: hda - fix internal mic on Dell Vostro 3500 laptop
ALSA: HDA: Remove quirk for Toshiba T110
ALSA: usb-audio - Fix the missing volume quirks at delayed init
ALSA: hda - Mute unused capture sources for Realtek codecs
ALSA: intel8x0: Improve comments for VM optimization
ASoC: Ensure we get an impedence reported for WM8958 jack detect
ASoC: Don't use wm8994->control_data when requesting IRQs
ASoC: Don't use wm8994->control_data in wm8994_readable_register()
ASoC: Update git repository URL
Linus Torvalds [Sat, 12 Nov 2011 01:43:51 +0000 (23:43 -0200)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (42 commits)
drm/radeon/kms/pm: switch to dynamically allocating clock mode array
drm/radeon/kms: optimize r600_pm_profile_init
drm/radeon/kms/pm: add a proper pm profile init function for fusion
drm/radeon/kms: remove extraneous calls to radeon_pm_compute_clocks()
drm/exynos: added padding to be 64-bit align.
drm: fix kconfig unmet dependency warning
drm: add some comments to drm_wait_vblank and drm_queue_vblank_event
drm/radeon/benchmark: signedness bug in radeon_benchmark_move()
drm: do not sleep on vblank while holding a mutex
MAINTAINERS: exynos: Add EXYNOS DRM maintainer entry
drm: try to restore previous CRTC config if mode set fails
drm/radeon/kms: make an aux failure debug only
drm: drop select of SLOW_WORK
drm: serialize access to list of debugfs files
drm/radeon/kms: fix use of vram scratch page on evergreen/ni
drm/radeon: Make sure CS mutex is held across GPU reset.
drm: Ensure string is null terminated.
vmwgfx: Only allow 64x64 cursors
vmwgfx: Initialize clip rect loop correctly in surface dirty
vmwgfx: Close screen object system
...
Linus Torvalds [Sat, 12 Nov 2011 01:40:02 +0000 (23:40 -0200)]
Merge git://github.com/herbertx/crypto
* git://github.com/herbertx/crypto:
crypto: algapi - Fix build problem with NET disabled
crypto: user - Fix rwsem leak in crypto_user
Linus Torvalds [Sat, 12 Nov 2011 01:37:17 +0000 (23:37 -0200)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: fix force shutdown handling in xfs_end_io
xfs: constify xfs_item_ops
xfs: Fix possible memory corruption in xfs_readlink
Mauro Carvalho Chehab [Fri, 11 Nov 2011 22:26:03 +0000 (20:26 -0200)]
[media] Properly implement ITU-T J.88 Annex C support
The Annex C support were broken with the previous implementation,
as, at xc5000 and tda18271c2dd, it were choosing the wrong bandwidth
for some symbol rates.
At DRX-J, it were always selecting Annex A, even having Annex C
support coded there.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Olof Johansson [Fri, 11 Nov 2011 18:34:20 +0000 (10:34 -0800)]
Merge branch 'picoxcell-fixes' of git://github.com/jamieiles/linux-2.6-ji into fixes
Olof Johansson [Fri, 11 Nov 2011 16:53:46 +0000 (08:53 -0800)]
Merge branch 'imx-fixes-for-arnd' of git://git.pengutronix.de/git/imx/linux-2.6 into fixes
Shawn Guo [Thu, 10 Nov 2011 08:39:32 +0000 (16:39 +0800)]
arm/imx: fix imx6q mmc error when mounting rootfs
The following error is seen in some case when mounting rootfs from
SD/MMC cards.
Waiting for root device /dev/mmcblk0p1...
mmc1: host does not support reading read-only switch. assuming write-enable.
mmc1: new high speed SDHC card at address b368
mmcblk0: mmc1:b368 SDC 3.74 GiB
mmcblk0: p1
mmc1: Timeout waiting for hardware interrupt.
mmcblk0: error -110 transferring data, sector
3678224, nr 40, cmd response 0x900, card status 0xc00
end_request: I/O error, dev mmcblk0, sector
3678225
Buffer I/O error on device mmcblk0p1, logical block 458754
lost page write due to I/O error on mmcblk0p1
This patch fixes the problem by lowering the usdhc clock and correcting
watermark configuration.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Chris Ball <cjb@laptop.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Shawn Guo [Thu, 10 Nov 2011 08:39:31 +0000 (16:39 +0800)]
arm/imx: fix AUTO_ZRELADDR selection
The AUTO_ZRELADDR selection for ARCH_IMX_V4_V5 and ARCH_MX5 should
really be mutually exclusive to ZBOOT_ROM just like what ARCH_IMX_V6_V7
does.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Shawn Guo [Fri, 11 Nov 2011 07:37:14 +0000 (15:37 +0800)]
arm/imx: fix the references to ARCH_MX3
The config symbol ARCH_MX3 has been removed by commit '
a89cf59
arm/imx: merge i.MX3 and i.MX6', and it should not be referenced
any more.
The patch also change ARCH_MX* to SOC_IMX* for other platforms.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Richard Zhao [Tue, 8 Nov 2011 01:59:34 +0000 (09:59 +0800)]
ARM: mx51/53: set pwm clock parent to ipg_perclk
Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
David Sterba [Fri, 11 Nov 2011 15:14:57 +0000 (10:14 -0500)]
btrfs: rename the option to nospace_cache
Rename no_space_cache option to nospace_cache to be more consistent with
the rest, where the simple prefix 'no' is used to negate an option.
The option has been introduced during the -rc1 cycle and there are has not been
widely used, so it's safe.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Mauro Carvalho Chehab [Fri, 11 Nov 2011 14:46:23 +0000 (12:46 -0200)]
[media] dvb: Allow select between DVB-C Annex A and Annex C
DVB-C, as defined by ITU-T J.83 has 3 annexes. The differences between
Annex A and Annex C is that Annex C uses a subset of the modulation
types, and uses a different rolloff factor. A different rolloff means
that the bandwidth required is slicely different, and may affect the
saw filter configuration at the tuners. Also, some demods have different
configurations, depending on using Annex A or Annex C.
So, allow userspace to specify it, by changing the rolloff factor.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alex Deucher [Fri, 4 Nov 2011 14:09:43 +0000 (10:09 -0400)]
drm/radeon/kms/pm: switch to dynamically allocating clock mode array
On newer chips the number of clock modes per power state varies.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 4 Nov 2011 14:09:42 +0000 (10:09 -0400)]
drm/radeon/kms: optimize r600_pm_profile_init
Avoid a lot of extra loops through the pm state array.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 4 Nov 2011 14:09:41 +0000 (10:09 -0400)]
drm/radeon/kms/pm: add a proper pm profile init function for fusion
The new power tables need to be handled differently when setting
up the profiles.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 4 Nov 2011 14:09:40 +0000 (10:09 -0400)]
drm/radeon/kms: remove extraneous calls to radeon_pm_compute_clocks()
It's already called via the DPMS functions.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Arne Jansen [Fri, 11 Nov 2011 13:17:10 +0000 (08:17 -0500)]
Btrfs: handle bio_add_page failure gracefully in scrub
Currently scrub fails with ENOMEM when bio_add_page fails. Unfortunately
dm based targets accept only one page per bio, thus making scrub always
fails. This patch just submits the current bio when an error is encountered
and starts a new one.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Inki Dae [Fri, 4 Nov 2011 12:09:50 +0000 (21:09 +0900)]
drm/exynos: added padding to be 64-bit align.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Randy Dunlap [Mon, 31 Oct 2011 19:51:30 +0000 (12:51 -0700)]
drm: fix kconfig unmet dependency warning
Fix kconfig unmet dependency warning. BACKLIGHT_CLASS_DEVICE depends on
BACKLIGHT_LCD_SUPPORT, so select the latter along with the former.
warning: (DRM_RADEON_KMS && DRM_I915 && STUB_POULSBO && FB_BACKLIGHT && PANEL_SHARP_LS037V7DW01 && PANEL_ACX565AKM && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_ASUS && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT)
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 11 Nov 2011 11:17:43 +0000 (11:17 +0000)]
Merge branch 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
* 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau: Fix bandwidth calculation for DisplayPort
drm/nouveau: by default use low bpp framebuffer on low memory cards
drm/nv10: Change the BO size threshold determining the memory placement range.
drm/nvc0: enable acceleration for nvc1 by default
drm/nvc0/gr: fixup the mmio list register writes for 0xc1
drm/nvc1: hacky workaround to fix accel issues
drm/nvc0/gr: fix some bugs in grctx generation
drm/nvc0: enable acceleration on 0xc8 by default
drm/nvc0/vram: skip disabled PBFB subunits
drm/nv40/pm: fix issues on igp chipsets, which don't have memory
drm/nouveau: testing the wrong variable
drm/nvc0/vram: storage type 0xc3 is not compressed
drm/nv50: fix stability issue on NV86.
drm/nouveau: initialize chan->fence.lock before use
drm/nv50/vram: fix incorrect detection of bank count on newer chipsets
drm/nv50/gr: typo fix, how about we not reset fifo during graph init?
drm/nv50/bios: fixup mpll programming from the init table parser
drm/nouveau: fix oops if i2c bus not found in nouveau_i2c_identify()
drm: make sure drm_vblank_init() has been called before touching vbl_lock
Ilija Hadzic [Mon, 31 Oct 2011 17:11:57 +0000 (13:11 -0400)]
drm: add some comments to drm_wait_vblank and drm_queue_vblank_event
during the review of the fix for locks problems in drm_wait_vblank,
a couple of false concerns were raised about how the drm_vblank_get
and drm_vblank_put are used in this function; it turned out that the
code is correct and that it cannot be simplified
add a few comments to explain non-obvious flows in the code,
to prevent "false alarms" in the future
v2: incorporate comments received from Daniel Vetter
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dan Carpenter [Sat, 29 Oct 2011 07:21:28 +0000 (10:21 +0300)]
drm/radeon/benchmark: signedness bug in radeon_benchmark_move()
radeon_benchmark_do_move() returns an int so "time" should be int
too. Making it unsigned breaks the error handling.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>