OSDN Git Service
Junio C Hamano [Wed, 12 Aug 2009 23:36:04 +0000 (16:36 -0700)]
Merge branch 'maint'
* maint:
push: point to 'git pull' and 'git push --force' in case of non-fast forward
Documentation: add: <filepattern>... is optional
Change mentions of "git programs" to "git commands"
Documentation: merge: one <remote> is required
help.c: give correct structure's size to memset()
Junio C Hamano [Wed, 12 Aug 2009 23:15:55 +0000 (16:15 -0700)]
Merge branch 'maint-1.6.3' into maint
* maint-1.6.3:
Change mentions of "git programs" to "git commands"
Documentation: merge: one <remote> is required
help.c: give correct structure's size to memset()
Matthieu Moy [Sat, 8 Aug 2009 07:51:08 +0000 (09:51 +0200)]
push: point to 'git pull' and 'git push --force' in case of non-fast forward
'git push' failing because of non-fast forward is a very common situation,
and a beginner does not necessarily understand "fast forward" immediately.
Add a new section to the git-push documentation and refer them to it.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paul Bolle [Tue, 11 Aug 2009 13:03:10 +0000 (15:03 +0200)]
Documentation: add: <filepattern>... is optional
<filepattern>... is optional (e.g. when the --all or --update
options are used) so use square brackets in the synopsis.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ori Avtalion [Fri, 7 Aug 2009 14:24:21 +0000 (17:24 +0300)]
Change mentions of "git programs" to "git commands"
Most of the docs and printouts refer to "commands" when discussing what
the end users call via the "git" top-level program. We should refer them
as "git programs" when we discuss the fact that the commands are
implemented as separate programs, but in other contexts, it is better to
use the term "git commands" consistently.
Signed-off-by: Ori Avtalion <ori@avtalion.name>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paul Bolle [Tue, 11 Aug 2009 13:03:58 +0000 (15:03 +0200)]
Documentation: merge: one <remote> is required
merge only requires one <remote>, so "<remote>..." should be used in the
synopsis (and not "<remote> <remote>...").
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Tue, 11 Aug 2009 10:10:21 +0000 (12:10 +0200)]
help.c: give correct structure's size to memset()
These two structures are of the same type, but we'd better be consistent.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 12 Aug 2009 03:27:40 +0000 (23:27 -0400)]
allow pull --rebase on branch yet to be born
When doing a "pull --rebase", we check to make sure that the index and
working tree are clean. The index-clean check compares the index against
HEAD. The test erroneously reports dirtiness if we don't have a HEAD yet.
In such an "unborn branch" case, by definition, a non-empty index won't
be based on whatever we are pulling down from the remote, and will lose
the local change. Just check if $GIT_DIR/index exists and error out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 11 Aug 2009 05:23:59 +0000 (22:23 -0700)]
Merge branch 'maint'
* maint:
Fix typos in git-remote.txt and git-symbolic-ref.txt
git-instaweb: fix mod_perl detection for apache2
Junio C Hamano [Tue, 11 Aug 2009 05:23:48 +0000 (22:23 -0700)]
Merge branch 'maint-1.6.3' into maint
* maint-1.6.3:
Fix typos in git-remote.txt and git-symbolic-ref.txt
Junio C Hamano [Tue, 11 Aug 2009 05:18:21 +0000 (22:18 -0700)]
Merge branch 'jk/push-quiet'
* jk/push-quiet:
transport: don't show push status if --quiet is given
transport: pass "quiet" flag to pack-objects
push: add --quiet flag
Junio C Hamano [Tue, 11 Aug 2009 05:17:01 +0000 (22:17 -0700)]
Merge branch 'jc/maint-merge-recursive-fix'
* jc/maint-merge-recursive-fix:
merge-recursive: don't segfault while handling rename clashes
Junio C Hamano [Tue, 11 Aug 2009 05:16:47 +0000 (22:16 -0700)]
Merge branch 'zf/maint-gitweb-acname'
* zf/maint-gitweb-acname:
gitweb: parse_commit_text encoding fix
Junio C Hamano [Tue, 11 Aug 2009 05:16:42 +0000 (22:16 -0700)]
Merge branch 'ns/am-raw-email'
* ns/am-raw-email:
git-am: print fair error message when format detection fails
am: allow individual e-mail files as input
Junio C Hamano [Tue, 11 Aug 2009 05:16:09 +0000 (22:16 -0700)]
Merge branch 'np/maint-limit-delta-cache'
* np/maint-limit-delta-cache:
don't let the delta cache grow unbounded in 'git repack'
Junio C Hamano [Tue, 11 Aug 2009 05:15:41 +0000 (22:15 -0700)]
Merge branch 'jp/symlink-dirs'
* jp/symlink-dirs:
t6035-merge-dir-to-symlink depends on SYMLINKS prerequisite
git-checkout: be careful about untracked symlinks
lstat_cache: guard against full match of length of 'name' parameter
Demonstrate bugs when a directory is replaced with a symlink
Junio C Hamano [Tue, 11 Aug 2009 05:15:12 +0000 (22:15 -0700)]
Merge branch 'mk/grep-max-depth'
* mk/grep-max-depth:
grep: Add --max-depth option.
Junio C Hamano [Tue, 11 Aug 2009 05:14:57 +0000 (22:14 -0700)]
Merge branch 'js/run-command-updates'
* js/run-command-updates:
api-run-command.txt: describe error behavior of run_command functions
run-command.c: squelch a "use before assignment" warning
receive-pack: remove unnecessary run_status report
run_command: report failure to execute the program, but optionally don't
run_command: encode deadly signal number in the return value
run_command: report system call errors instead of returning error codes
run_command: return exit code as positive value
MinGW: simplify waitpid() emulation macros
Štěpán Němec [Tue, 11 Aug 2009 00:52:07 +0000 (02:52 +0200)]
Fix typos in git-remote.txt and git-symbolic-ref.txt
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Lasslett [Mon, 10 Aug 2009 16:05:06 +0000 (00:05 +0800)]
Check return value of ftruncate call in http.c
In new_http_object_request(), check ftruncate() call return value and
handle possible errors.
Signed-off-by: Jeff Lasslett <jeff.lasslett@gmail.com>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tay Ray Chuan [Mon, 10 Aug 2009 15:59:55 +0000 (23:59 +0800)]
http.c: replace usage of temporary variable for urls
Use preq->url in new_http_pack_request and freq->url in
new_http_object_request when calling curl_setopt(CURLOPT_URL), instead
of using an intermediate variable, 'url'.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tay Ray Chuan [Mon, 10 Aug 2009 15:55:48 +0000 (23:55 +0800)]
http.c: free preq when aborting
Free preq in new_http_pack_request when aborting. preq was allocated
before jumping to the 'abort' label so this is safe.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 10 Aug 2009 20:22:33 +0000 (13:22 -0700)]
Merge branch 'master' of git://git.bogomips.org/git-svn
* 'master' of git://git.bogomips.org/git-svn:
git-svn: ignore leading blank lines in svn:ignore
svn: Honor --prefix option in init without --stdlayout
svn: Add && to t9107-git-svn-migrate.sh
Michael Haggerty [Fri, 7 Aug 2009 19:21:21 +0000 (21:21 +0200)]
git-svn: ignore leading blank lines in svn:ignore
Subversion ignores all blank lines in svn:ignore properties. The old
git-svn code ignored blank lines everywhere except for the first line
of the svn:ignore property. This patch makes the "git svn
show-ignore" and "git svn create-ignore" commands ignore leading blank
lines, too.
Also include leading blank lines in the test suite.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Adam Brewster [Tue, 4 Aug 2009 01:40:38 +0000 (21:40 -0400)]
svn: Honor --prefix option in init without --stdlayout
Most users who type
git svn init file:///tmp/repo --prefix=my-svn/
would expect the root of the svn repository to be tracked by
refs/remotes/my-svn/git-svn.
Acked-by: Eric Wong <normalperson@yhbt.net>
Adam Brewster [Tue, 4 Aug 2009 01:40:37 +0000 (21:40 -0400)]
svn: Add && to t9107-git-svn-migrate.sh
It was probably intended for the test to fail unless all of the
commands succeed.
[ew: fixed tests to actually work]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Mark A Rada [Sat, 8 Aug 2009 22:24:02 +0000 (18:24 -0400)]
git-instaweb: fix mod_perl detection for apache2
The script was looking for something that matched the '^our $gitbin'
regex, which no longer exists in gitweb.cgi.
Now it looks for 'MOD_PERL', which should be on the line that checks
to see if the script is running in a mod_perl environment.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Sun, 9 Aug 2009 00:47:36 +0000 (02:47 +0200)]
Document 'stash clear' recovery via unreachable commits
Add an example to the stash documentation that shows how to quickly
find candidate commits among the 'git fsck --unreachable' output.
Unless you have merges of branch names containing WIP, or edit your
merge messages to say WIP, there will be no false positives.
Snippet written by Björn "doener" Steinbrink and me after zepolen_
asked on IRC.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sun, 9 Aug 2009 08:50:37 +0000 (04:50 -0400)]
t/Makefile: include config.mak
This is useful if you want to specify GIT_TEST_OPTS that you
always use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sun, 9 Aug 2009 08:39:45 +0000 (04:39 -0400)]
tests: allow user to specify trash directory location
The tests generate a large amount of I/O activity creating
and destroying repositories and files. We can improve the
time it takes to run the test suite by creating trash
directories on filesystems with better performance
characteristic, even though we may not want the rest of the
git repository on those filesystems (e.g., because they are
not network connected, or because they are temporary
ramdisks).
For example, on a dual processor system:
$ cd t && time make -j32
real 1m51.562s
user 0m59.260s
sys 1m20.933s
# /dev/shm is tmpfs
$ cd t && time make -j32 GIT_TEST_OPTS="--root=/dev/shm"
real 1m1.484s
user 0m53.555s
sys 1m5.264s
We almost halve the wall clock time, and we utilize the
dual processors much better.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sun, 9 Aug 2009 08:38:11 +0000 (04:38 -0400)]
tests: provide $TRASH_DIRECTORY variable
Most scripts don't care about the absolute path to the trash
directory. The one exception was t4014 script, which pieced
together $TEST_DIRECTORY and $test itself to get an absolute
directory.
Instead, let's provide a $TRASH_DIRECTORY which specifies
the same thing. This keeps the $test variable internal to
test-lib.sh and paves the way for trash directories in other
locations.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sun, 9 Aug 2009 08:37:52 +0000 (04:37 -0400)]
tests: use "$TEST_DIRECTORY" instead of ".."
The $TEST_DIRECTORY variable allows tests to find the
top-level test directory regardless of the current working
directory.
In the past, this has been used to accomodate tests which
change directories, but it is also the first step to being
able to move trash directories outside of the
$TEST_DIRECTORY hierarchy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Sun, 9 Aug 2009 16:02:55 +0000 (18:02 +0200)]
t0001-init: split the existence test from the permission test
The test for correct permissions after init created a deep directory
must be guarded by POSIXPERM. But testing that the deep dirctory exists
is good even on platforms that do not provide the POSIXPERM prerequiste.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Sun, 9 Aug 2009 15:38:04 +0000 (17:38 +0200)]
t0001-init: fix a file name
Without this change, grep fails because it does not find the file
instead of because it does not find the text in the file.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Sun, 9 Aug 2009 15:35:02 +0000 (17:35 +0200)]
t6035-merge-dir-to-symlink depends on SYMLINKS prerequisite
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Sat, 8 Aug 2009 20:44:20 +0000 (22:44 +0200)]
api-run-command.txt: describe error behavior of run_command functions
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 8 Aug 2009 05:35:17 +0000 (22:35 -0700)]
Merge branch 'maint'
* maint:
verify-pack -v: do not report "chain length 0"
t5510: harden the way verify-pack is used
Junio C Hamano [Sat, 8 Aug 2009 03:44:26 +0000 (20:44 -0700)]
Merge branch 'maint-1.6.3' into maint
* maint-1.6.3:
verify-pack -v: do not report "chain length 0"
t5510: harden the way verify-pack is used
Junio C Hamano [Sat, 8 Aug 2009 03:44:15 +0000 (20:44 -0700)]
Merge branch 'maint-1.6.2' into maint-1.6.3
* maint-1.6.2:
verify-pack -v: do not report "chain length 0"
t5510: harden the way verify-pack is used
Junio C Hamano [Sat, 8 Aug 2009 03:44:09 +0000 (20:44 -0700)]
Merge branch 'maint-1.6.1' into maint-1.6.2
* maint-1.6.1:
verify-pack -v: do not report "chain length 0"
t5510: harden the way verify-pack is used
Junio C Hamano [Sat, 8 Aug 2009 03:44:02 +0000 (20:44 -0700)]
Merge branch 'maint-1.6.0' into maint-1.6.1
* maint-1.6.0:
verify-pack -v: do not report "chain length 0"
t5510: harden the way verify-pack is used
Junio C Hamano [Fri, 7 Aug 2009 22:36:31 +0000 (15:36 -0700)]
verify-pack -v: do not report "chain length 0"
When making a histogram of delta chain length in the pack, the program
collects number of objects whose delta depth exceeds the MAX_CHAIN limit
in histogram[0], and showed it as the number of items that exceeds the
limit correctly. HOWEVER, it also showed the same number labeled as
"chain length = 0".
In fact, we are not showing the number of objects whose chain length is
zero, i.e. the base objects. Correct this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 8 Aug 2009 03:12:13 +0000 (20:12 -0700)]
t5510: harden the way verify-pack is used
The test ignored the exit status from verify pack command, and also relied
on not seeing any delta chain statistics.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthieu Moy [Thu, 6 Aug 2009 10:47:21 +0000 (12:47 +0200)]
Show usage string for 'git log -h', 'git show -h' and 'git diff -h'
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nicolas Sebrecht [Fri, 7 Aug 2009 01:08:13 +0000 (20:08 -0500)]
git-am: print fair error message when format detection fails
Avoid git ending with this message:
"Patch format is not supported."
With improved error message in the format detection failure case by
Giuseppe Bilotta.
Signed-off-by: Nicolas Sebrecht <ni.s@laposte.net>
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 7 Aug 2009 01:08:12 +0000 (20:08 -0500)]
am: allow individual e-mail files as input
We traditionally allowed a mbox file or a directory name of a maildir (but
never an individual file inside a maildir) to be given to "git am". Even
though an individual file in a maildir (or more generally, a piece of
RFC2822 e-mail) is not a mbox file, it contains enough information to
create a commit out of it, so there is no reason to reject one. Running
mailsplit on such a file feels stupid, but it does not hurt.
This builds on top of
a5a6755 (git-am foreign patch support: introduce
patch_format, 2009-05-27) that introduced mailbox format detection. The
codepath to deal with a mbox requires it to begin with "From " line and
also allows it to begin with "From: ", but a random piece of e-mail can
and often do begin with any valid RFC2822 header lines.
Instead of checking the first line, we extract all the lines up to the
first empty line, and make sure they look like e-mail headers.
A test is added to t4150 to demonstrate this feature.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthieu Moy [Thu, 6 Aug 2009 15:11:48 +0000 (17:11 +0200)]
git-ls-files.txt: clarify what "other files" mean for --other
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Björn Steinbrink [Thu, 6 Aug 2009 12:15:14 +0000 (14:15 +0200)]
git-describe: Die early if there are no possible descriptions
If we find no refs that may be used for git-describe with the current
options, then die early instead of pointlessly walking the whole
history.
In git.git with all the tags dropped, this makes "git describe" go down
from 0.244 to 0.003 seconds for me. This is especially noticeable with
"git submodule status" which calls describe with increasing levels of
allowed refs to be matched. For a submodule without tags, this means
that it walks the whole history in the submodule twice (first annotated,
then plain tags), just to find out that it can't describe the commit
anyway.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthieu Moy [Wed, 5 Aug 2009 14:56:25 +0000 (16:56 +0200)]
rebase: consistent error messages for staged and unstaged changes.
Previous version expose the output of the plumbing update-index to the
user, which novice users have difficulty to understand.
We still need to run update-index to refresh the cache (if
diff.autorefreshindex is false, git diff won't do it).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jari Aalto [Wed, 5 Aug 2009 21:20:32 +0000 (00:20 +0300)]
git-tag(1): Refer to git-check-ref-format(1) for <name>
Explain briefly what characters are prohibited in tag <name>
and point to git-check-ref-format(1) manual page for
further information.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 5 Aug 2009 16:42:33 +0000 (09:42 -0700)]
git-rev-list.txt: Clarify the use of multiple revision arguments
If one thinks of a revision as the set of commits which can be reached
from the rev, and of ^rev as the complement, then multiple arguments to
git rev-list can be neither understood as the intersection nor the union
of the individual sets.
But set language is the natural as well as logical language in which to
phrase this. So, add a paragraph which explains multiple arguments using
set language.
Suggested-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Kågedal [Fri, 31 Jul 2009 07:23:09 +0000 (09:23 +0200)]
git.el: Clarify documentation of git-commit-tree
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nicolas Pitre [Wed, 5 Aug 2009 20:55:07 +0000 (16:55 -0400)]
don't let the delta cache grow unbounded in 'git repack'
I have 4GB of RAM on my system which should, in theory, be quite enough
to repack a 600 MB repository. However the unbounded delta cache size
always pushes it into swap, at which point everything virtually comes to
a halt. So unbounded caches are never a good idea.
A default of 256MB should be a good compromize between memory usage and
speed where medium sized repositories are still likely to fit in the
cache with a reasonable memory usage, and larger repositories are going
to take quite some time to repack already anyway.
While at it, clarify the associated config variable documentation
entries a bit.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 5 Aug 2009 20:23:26 +0000 (16:23 -0400)]
transport: don't show push status if --quiet is given
When --quiet is given, the user generally only wants to see
errors. So let's suppress printing the ref status table
unless there is an error, in which case we print out the
whole table.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 5 Aug 2009 20:22:36 +0000 (16:22 -0400)]
transport: pass "quiet" flag to pack-objects
When pushing over the git protocol, pack-objects gives
progress reports about the pack being sent. If "push" is
given the --quiet flag, it now passes "-q" to pack-objects,
suppressing this output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 5 Aug 2009 20:22:19 +0000 (16:22 -0400)]
push: add --quiet flag
Some transports produce output even without "--verbose"
turned on. This provides a way to tell them to be more
quiet (whereas simply redirecting might lose error
messages).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 5 Aug 2009 19:40:07 +0000 (12:40 -0700)]
Merge branch 'sb/read-tree'
* sb/read-tree:
read-tree: migrate to parse-options
read-tree: convert unhelpful usage()'s to helpful die()'s
Junio C Hamano [Wed, 5 Aug 2009 19:40:00 +0000 (12:40 -0700)]
Merge branch 'jc/apply-epoch-patch'
* jc/apply-epoch-patch:
apply: notice creation/removal patches produced by GNU diff
Junio C Hamano [Wed, 5 Aug 2009 19:39:37 +0000 (12:39 -0700)]
Merge branch 'sb/parse-options'
* sb/parse-options:
prune-packed: migrate to parse-options
verify-pack: migrate to parse-options
verify-tag: migrate to parse-options
write-tree: migrate to parse-options
Junio C Hamano [Wed, 5 Aug 2009 19:39:33 +0000 (12:39 -0700)]
Merge branch 'ns/init-mkdir'
* ns/init-mkdir:
git init: optionally allow a directory argument
Conflicts:
builtin-init-db.c
Junio C Hamano [Wed, 5 Aug 2009 19:39:06 +0000 (12:39 -0700)]
Merge branch 'mk/init-db-parse-options'
* mk/init-db-parse-options:
init-db: migrate to parse-options
Junio C Hamano [Wed, 5 Aug 2009 19:38:54 +0000 (12:38 -0700)]
Merge branch 'jk/maint-show-tag'
* jk/maint-show-tag:
show: add space between multiple items
show: suppress extra newline when showing annotated tag
Junio C Hamano [Wed, 5 Aug 2009 19:38:39 +0000 (12:38 -0700)]
Merge branch 'sb/maint-pull-rebase'
* sb/maint-pull-rebase:
pull: support rebased upstream + fetch + pull --rebase
t5520-pull: Test for rebased upstream + fetch + pull --rebase
Junio C Hamano [Wed, 5 Aug 2009 19:38:29 +0000 (12:38 -0700)]
Merge branch 'ne/futz-upload-pack'
* ne/futz-upload-pack:
Shift object enumeration out of upload-pack
Conflicts:
upload-pack.c
Junio C Hamano [Wed, 5 Aug 2009 19:37:40 +0000 (12:37 -0700)]
Merge branch 'maint'
* maint:
gitweb/README: Document $base_url
Documentation: git submodule: add missing options to synopsis
Better usage string for reflog.
hg-to-git: don't import the unused popen2 module
send-email: remove debug trace
config: Keep inner whitespace verbatim
Junio C Hamano [Wed, 5 Aug 2009 19:37:24 +0000 (12:37 -0700)]
Merge branch 'maint-1.6.3' into maint
* maint-1.6.3:
Better usage string for reflog.
hg-to-git: don't import the unused popen2 module
send-email: remove debug trace
config: Keep inner whitespace verbatim
Zoltán Füzesi [Sun, 2 Aug 2009 07:42:24 +0000 (09:42 +0200)]
gitweb: parse_commit_text encoding fix
Call to_utf8 when parsing author and committer names, otherwise they will appear
with bad encoding if they written by using chop_and_escape_str.
Signed-off-by: Zoltán Füzesi <zfuzesi@eaglet.hu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Tue, 4 Aug 2009 15:54:32 +0000 (17:54 +0200)]
gitweb/README: Document $base_url
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jens Lehmann [Sat, 1 Aug 2009 18:49:47 +0000 (20:49 +0200)]
Documentation: git submodule: add missing options to synopsis
The option --merge was missing for submodule update and --cached for
submodule summary.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber [Wed, 5 Aug 2009 07:59:20 +0000 (09:59 +0200)]
git-merge-base/git-show-branch --merge-base: Documentation and test
Currently, the documentation suggests that 'git merge-base -a' and 'git
show-branch --merge-base' are equivalent (in fact it claims that the
former cannot handle more than two revs).
Alas, the handling of more than two revs is very different. Document
this by tests and correct the documentation to reflect this.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber [Wed, 5 Aug 2009 07:59:19 +0000 (09:59 +0200)]
git-merge-base/git-show-branch: Cleanup documentation and usage
Make sure that usage strings and documentation coincide with each other
and with the actual code.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber [Wed, 5 Aug 2009 07:59:18 +0000 (09:59 +0200)]
t6010-merge-base.sh: Depict the octopus test graph
...so that it is easier to reuse it for other tests.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthieu Moy [Wed, 5 Aug 2009 15:36:28 +0000 (17:36 +0200)]
Better usage string for reflog.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Miklos Vajna [Mon, 3 Aug 2009 16:41:34 +0000 (18:41 +0200)]
hg-to-git: don't import the unused popen2 module
Importing the popen2 module in Python-2.6 results in the
"DeprecationWarning: The popen2 module is deprecated. Use the
subprocess module." message. The module itself isn't used in fact, so
just removing it solves the problem.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Erik Faye-Lund [Tue, 4 Aug 2009 21:57:34 +0000 (21:57 +0000)]
send-email: remove debug trace
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
David Soria Parra [Tue, 4 Aug 2009 09:28:40 +0000 (11:28 +0200)]
run-command.c: squelch a "use before assignment" warning
i686-apple-darwin9-gcc-4.0.1 (GCC) 4.0.1 (Apple Inc. build 5490) compiler
(and probably others) mistakenly thinks variable failed_errno is used
before assigned. Work it around by giving it a fake initialization.
Signed-off-by: David Soria Parra <dsp@php.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Giuseppe Bilotta [Fri, 31 Jul 2009 06:48:49 +0000 (08:48 +0200)]
gitweb: fix 'Use of uninitialized value' error in href()
Equality between file_parent and file_name was being checked without a
preliminary check for existence of the parameters.
Fix by wrapping the equality check in appropriate if (defined ...),
rearranging the lines to prevent excessive length.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephen Boyd [Tue, 4 Aug 2009 04:13:21 +0000 (21:13 -0700)]
technical-docs: document tree-walking API
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
André Goddard Rosa [Fri, 31 Jul 2009 16:50:50 +0000 (13:50 -0300)]
Fix typos on pt_BR/gittutorial.txt translation
With extra fixes from Thadeu and Carlos as well.
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Carlos R. Mafra <crmafra2@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wesley J. Landaker [Fri, 31 Jul 2009 17:45:00 +0000 (11:45 -0600)]
Documentation: git-send-email: correct statement about standard ports
The current documentation states that servers typically listen on port
465 and calls this "ssmtp". While it's true that many mail servers use
port 465 for SSL smtp, this is non-standard, and hails from the days
before smtp and submission TLS support, that arrived in RFC2487 and
RFC3207. Port 465 is actually assigned by IANA for unrelated purposes,
and is mostly still used by mail servers today only to support Outlook
Express.
In any case, this patch helps the documentation better reflect both
standards and reality, while still helpfully mentioning ports numbers
that a user may wish to specify.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wesley J. Landaker [Thu, 30 Jul 2009 23:08:53 +0000 (17:08 -0600)]
Documentation: git-send-email: fix submission port number
The current documentation confuses non-standard SSL smtp port 465 with
submission port 587 (RFC 4406). This patch just changes the referenced
number.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Björn Steinbrink [Thu, 30 Jul 2009 11:41:57 +0000 (13:41 +0200)]
config: Keep inner whitespace verbatim
Configuration values are expected to be quoted when they have leading or
trailing whitespace, but inner whitespace should be kept verbatim even if
the value is not quoted. This is already documented in git-config(1), but
the code caused inner whitespace to be collapsed to a single space,
breaking, for example, clones from a path that has two consecutive spaces
in it, as future fetches would only see a single space.
Reported-by: John te Bokkel <tanj.tanj@gmail.com>
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Geoffrey Irving [Tue, 28 Jul 2009 02:20:22 +0000 (22:20 -0400)]
git fast-export: add --no-data option
When using git fast-export and git fast-import to rewrite the history
of a repository with large binary files, almost all of the time is
spent dealing with blobs. This is extremely inefficient if all we want
to do is rewrite the commits and tree structure. --no-data skips the
output of blobs and writes SHA-1s instead of marks, which provides a
massive speedup.
Signed-off-by: Geoffrey Irving <irving@naml.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Mon, 27 Jul 2009 18:49:56 +0000 (20:49 +0200)]
parse-opt: optionally show "--no-" option string
It is usually better to have positive options, to avoid confusing double
negations. However, sometimes it is desirable to show the negative option
in the help.
Introduce the flag PARSE_OPT_NEGHELP to do that.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 31 Jul 2009 00:38:15 +0000 (17:38 -0700)]
merge-recursive: don't segfault while handling rename clashes
When a branch moves A to B while the other branch created B (or moved C to
B), the code tried to rename one of them to B~something to preserve both
versions, and failed to register temporary resolution for the original
path B at stage#0 during virtual ancestor computation. This left the
index in unmerged state and caused a segfault.
A better solution is to merge these two versions of B's in place and use
the (potentially conflicting) result as the intermediate merge result in
the virtual ancestor.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Thu, 30 Jul 2009 03:22:25 +0000 (20:22 -0700)]
git-checkout: be careful about untracked symlinks
This fixes the case where an untracked symlink that points at a directory
with tracked paths confuses the checkout logic, demostrated in t6035.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kjetil Barvik [Sun, 14 Jun 2009 13:08:28 +0000 (15:08 +0200)]
lstat_cache: guard against full match of length of 'name' parameter
longest_path_match() in symlinks.c does exactly what it's name says,
but in some cases that match can be too long, since the
has_*_leading_path() functions assumes that the match will newer be as
long as the name string given to the function.
fix this by adding an extra if test which checks if the match length
is equal to the 'len' parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pickens, James E [Wed, 29 Jul 2009 21:02:39 +0000 (14:02 -0700)]
Demonstrate bugs when a directory is replaced with a symlink
This test creates two directories, a/b and a/b-2, then replaces a/b with
a symlink to a/b-2, then merges that change into the 'baseline' commit,
which contains an unrelated change.
There are two bugs:
1. 'git checkout' incorrectly deletes work tree file a/b-2/d.
2. 'git merge' incorrectly deletes work tree file a/b-2/d.
The test goes on to create another branch in which a/b-2 is replaced
with a symlink to a/b (i.e., the reverse of what was done the first
time), and merge it into the 'baseline' commit.
There is a different bug:
3. The merge should be clean, but git reports a conflict.
Signed-off-by: James Pickens <james.e.pickens@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thadeu Lima de Souza Cascardo [Mon, 29 Jun 2009 15:32:22 +0000 (12:32 -0300)]
Translate the tutorial to Brazillian Portuguese
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 27 Jul 2009 21:27:47 +0000 (14:27 -0700)]
request-pull: optionally show a patch as well
Allow git request-pull to append diff body into the pull request.
It's useful for small series of commits.
Tested-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 29 Jul 2009 17:39:57 +0000 (10:39 -0700)]
Merge branch 'hv/cvsps-tests'
* hv/cvsps-tests:
t/t9600: remove exit after test_done
cvsimport: extend testcase about patchset order to contain branches
cvsimport: add test illustrating a bug in cvsps
Add a test of "git cvsimport"'s handling of tags and branches
Add some tests of git-cvsimport's handling of vendor branches
Test contents of entire cvsimported "master" tree contents
Use CVS's -f option if available (ignore user's ~/.cvsrc file)
Start a library for cvsimport-related tests
Alex Riesen [Mon, 11 May 2009 09:31:42 +0000 (11:31 +0200)]
Add a reminder test case for a merge with F/D transition
The problem is that if a file was replaced with a directory containing
another file with the same content and mode, an attempt to merge it
with a branch descended from a commit before this F->D transition will
cause merge-recursive to break. It breaks even if there were no
conflicting changes on that other branch.
Originally reported by Anders Melchiorsen.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 29 Jul 2009 16:33:29 +0000 (09:33 -0700)]
Start 1.6.5 cycle
The next major release will be 1.6.5, hopefully with a shorter cycle
than the 1.6.4 cycle. After that in 1.7.0 we can make potentially
backward incompatible changes if necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 29 Jul 2009 07:32:42 +0000 (00:32 -0700)]
GIT 1.6.4
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 29 Jul 2009 07:00:56 +0000 (00:00 -0700)]
Sync with 1.6.3.4
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 29 Jul 2009 06:52:58 +0000 (23:52 -0700)]
GIT 1.6.3.4
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephen Boyd [Sun, 31 May 2009 05:08:02 +0000 (22:08 -0700)]
config.txt: document add.ignore-errors
Use the description of "--ignore-errors" from git-add.txt as
inspiration.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tom Grennan [Wed, 29 Jul 2009 01:30:02 +0000 (18:30 -0700)]
request-pull: allow ls-remote to notice remote.$nickname.uploadpack
The location to pull from should be converted from the configured nickname
to URL in the message, but ls-remote should be fed the nickname so that
the command uses remote.$nickname.* variables, most notably "uploadpack".
Signed-off-by: Tom Grennan <tgrennan@redback.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Kågedal [Tue, 28 Jul 2009 08:32:18 +0000 (10:32 +0200)]
Update the documentation of the raw diff output format
This includes mentioning the initial hash output of diff-tree, and
changes the header to "raw output format" which is more descriptive.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber [Tue, 28 Jul 2009 14:42:15 +0000 (16:42 +0200)]
git-rerere.txt: Clarify ambiguity of the config variable
Use the less ambiguous
"set variable foo in order to enable bar"
rather than
"set variable foo to enable bar" which may trick users into
assuming that "enable" is a good value for "foo".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>