OSDN Git Service
Sharvil Nanavati [Thu, 17 Jul 2014 06:37:09 +0000 (06:37 +0000)]
am
81173491: Merge "Bluetooth: Cleaning up pan_conn DB, if connection is not successful." into klp-wireless-dev
* commit '
81173491454e47a0a24ab30fae0b59248516e844':
Bluetooth: Cleaning up pan_conn DB, if connection is not successful.
Sharvil Nanavati [Thu, 17 Jul 2014 06:26:21 +0000 (06:26 +0000)]
Merge "Bluetooth: Cleaning up pan_conn DB, if connection is not successful." into klp-wireless-dev
Nitin Shivpure [Thu, 3 Oct 2013 13:36:12 +0000 (19:06 +0530)]
Bluetooth: Cleaning up pan_conn DB, if connection is not successful.
A case where DUT is paired with remoteDeviceA & remoteDeviceB.
remoteDeviceA is not pagable(turned off or some other reason).
DUT(PANU) try to connect remoteDeviceA(NAP). But connection is
unsuccessful, Because remoteDeviceA is not pagable, In this scenario
btpan_conn Database is not cleaning up at btif layer. Later
remoteDeviceB(PANU) connect to DUT(NAP) & connection is succesful,
When remoteDeviceB disconnect existing connection. As database
still has remoteDeviceA BD address at Btif layer. remoteDeviceA
BD address is passed instead of remoteDeviceB BD address from Btif
to UI. So remoteDeviceB still shows connected on UI. Cleaning up
pan_conn database for particular pan connection at BTIF layer,
whichever connection is not successful will solve this issue.
Change-Id: I31dfe3ef46295e74bbfb57563e4fd4fc7155f006
Matthew Xie [Wed, 16 Jul 2014 21:18:20 +0000 (21:18 +0000)]
am
99ebcfc0: Merge "PM: Stop Power Manager Timer if in sniff mode" into klp-wireless-dev
* commit '
99ebcfc07fe517454e14a8dc815a48344d0da559':
PM: Stop Power Manager Timer if in sniff mode
Hemant Gupta [Wed, 16 Jul 2014 21:18:20 +0000 (21:18 +0000)]
am
2a5cec82: Bluetooth: Update security for HID Devices to Encrypt on BT On.
* commit '
2a5cec826e72e2c9ced8f3ccf772fec179186e71':
Bluetooth: Update security for HID Devices to Encrypt on BT On.
Sharvil Nanavati [Wed, 16 Jul 2014 18:07:56 +0000 (18:07 +0000)]
am
446da53d: Eliminate last_ticks from TIMER_LIST_ENT.
* commit '
446da53d6fd03ca19eef8c43a56b27091ea7c54b':
Eliminate last_ticks from TIMER_LIST_ENT.
Sharvil Nanavati [Tue, 15 Jul 2014 22:18:12 +0000 (15:18 -0700)]
Eliminate last_ticks from TIMER_LIST_ENT.
It's unnecessary, potentially calculated incorrectly, and the insertion
logic that depended on it was fragile. I've rewritten the list
insertion routine so it's easier to follow. This should also fix
http://b/
16259295.
Change-Id: Ib7184c94c495c03d3acbe105955b1bb712dbbfaa
(cherry picked from commit
a1bfd3ee95378fab78c931c3360cfbd16de3b617)
Matthew Xie [Wed, 16 Jul 2014 21:11:12 +0000 (21:11 +0000)]
Merge "PM: Stop Power Manager Timer if in sniff mode" into klp-wireless-dev
Hemant Gupta [Thu, 12 Jun 2014 07:49:15 +0000 (13:19 +0530)]
PM: Stop Power Manager Timer if in sniff mode
Power manager timer is started when ACL link is in active mode
depending on profile connected. This timer was never stopped
when link was put in sniff mode by remote device preventing
system from going to sleep since timer is still active resulting
in extra power consumption.
Change-Id: I7569eed3ad7e0487e411377977b4f0671f24df12
Hemant Gupta [Thu, 29 Aug 2013 10:16:49 +0000 (15:46 +0530)]
Bluetooth: Update security for HID Devices to Encrypt on BT On.
This patch updates HID Devices security mask to BTA_SEC_ENCRYPT from
BTA_SEC_NONE. Without this change it was observed that on BT Reset,
authentication and encryption were not initiated by DUT for incoming
HID Control L2CAP Connection Request from remote HID Keyboard device.
Change-Id: I484fbae1294fde386bd7959467214f9968e381e9
Sharvil Nanavati [Tue, 15 Jul 2014 22:18:12 +0000 (15:18 -0700)]
Eliminate last_ticks from TIMER_LIST_ENT.
It's unnecessary, potentially calculated incorrectly, and the insertion
logic that depended on it was fragile. I've rewritten the list
insertion routine so it's easier to follow. This should also fix
http://b/
16259295.
Change-Id: Ib7184c94c495c03d3acbe105955b1bb712dbbfaa
Hemant Gupta [Tue, 15 Jul 2014 17:02:39 +0000 (17:02 +0000)]
am
5ff866c6: Bluetooth: Getbuf returning invalid buffer pointer
* commit '
5ff866c6cf008ed5361c8a37256cb9656adc3cfc':
Bluetooth: Getbuf returning invalid buffer pointer
Hemant Gupta [Fri, 12 Jul 2013 14:35:54 +0000 (20:05 +0530)]
Bluetooth: Getbuf returning invalid buffer pointer
Getbuff is checking for the pool which can accommodate
requested size, but is changing the pool with a restricted
check and not checking for the free memory size in that pool.
Added a check to avoid returng the wrong pool free buf pointer.
Without this patch, SDP Codenomicon TestSuite crash is observed
on Bluedroid stack.
Change-Id: Id66d460c5a40d8c3208438d7cfaf729e9b355184
Sharvil Nanavati [Sat, 5 Jul 2014 00:51:29 +0000 (17:51 -0700)]
Extend the threading library to back thread with an event queue.
This change allows arbitrary functions to be called on a given
thread which will clean up much of the dispatch code in bluedroid.
Looking forward, this code will be extended to allow additional objects
and queues to be attached to a thread for more customizable dispatch.
Change-Id: Id6f86435add1a1d13a0f18f3979df68a6ce16663
Sharvil Nanavati [Fri, 4 Jul 2014 23:33:37 +0000 (16:33 -0700)]
Expose enqueue/dequeue file descriptors for fixed_queue.
These file descriptors can be used with a reactor to perform
non-blocking enqueue/dequeue operations.
Change-Id: I19c790598e63bf632847f97d93526e1ce7ebdbec
Andre Eisenbach [Sat, 12 Jul 2014 01:18:05 +0000 (01:18 +0000)]
Merge "Calculate A2DP frames to send based on elapsed time"
Andre Eisenbach [Fri, 11 Jul 2014 23:57:24 +0000 (16:57 -0700)]
Calculate A2DP frames to send based on elapsed time
This patch is aimed at improving A2DP audio quality by sending the
correct number of frames based on the actual time elapes between "ticks"
in order to account for timer drift.
Change-Id: If5b7cde90f5eb10b926ad247f51cff0eb60bbff7
Mike Lockwood [Fri, 11 Jul 2014 19:05:04 +0000 (12:05 -0700)]
A2DP: Fix audio stuttering in A2DP sink mode
Change-Id: Ied821aeb14f83e3fd1daa6e175ac995abbfbb198
Mike J. Chen [Sat, 12 Jul 2014 00:57:15 +0000 (00:57 +0000)]
Merge "Fix GKI buffer leak with discovery information service reading"
Mike J. Chen [Sat, 28 Jun 2014 02:01:10 +0000 (19:01 -0700)]
Fix GKI buffer leak with discovery information service reading
If the discovery information service of the LE client has
the fields model number, serial number, fw version, etc,
the service would allocate PKI buffer and never do anything
with it, so it would leak. It looks like it should have
been assigned the a callback string array, however fixing
that still doesn't fix the leak because the code that receives
the string array, bta_hh_le_dis_cback(), never uses it and
never frees it.
I believe the semantic is that the string arrays are kept around
as a cache in the srvc engine connection structure,
so it's the srvc engine dealloc of the callback structure that
needs to also free the string buffers if they have been allocated.
After fixing the string array allocation, add code to free the
string array entries if they are not null.
Also fixed an off by one error in DIS_SrUpdate() that would also lead
to a GKI buffer leak.
Improve two string termination cases to use a simple set of the
last entry in the char array instead of memsetting the whole array
when most of it will be filled by a following memcpy.
Change-Id: I7905cd771dbbe166e3c2b42e019bac9f5a312877
Signed-off-by: Mike J. Chen <mjchen@google.com>
Mike J. Chen [Tue, 1 Jul 2014 19:41:02 +0000 (12:41 -0700)]
Fix deadlock and non-working socket msg throttling
Two major bugs in btif_config.c. One is that due to improper
locking order, a deadlock could occur (symptom is generally
out of GKI buffers because BTIF thread stops processing it's
mailbox because it is blocked sending a msg to the socket
thread, which in turn is blocked because BTIF is holding
the lock it needs to do the config save that BTIF requested
in the first place).
The other is also lock related. The mechanism to throttle
socket messages based on whether there was one already
in flight wasn't working because there wasn't locking
when that variable was being used. The compiler would be
free to cache it in a register on SMP machines, so it would
never look like there as a value in flight. This would
cause a bunch of messages to be queued up, and then the
way the handling worked in cfg_cmd_callback(), every
cmd would cause a 3 second sleep, even if there was nothing
to do. Modified the loop to check if there was nothing
to do before sleeping.
I was running into both bugs when repeatedly pairing and
unpairing a BLE device. The deadlock would hit first, causing
out of GKI buffers. Once I fixed the deadlock, I would still
run out of GKI buffers because the socket thread wasn't working
fast enough to clear the backlog of socket messages it had
received.
Also optimized some string termination code which was using
a memset of the full buffer before and then copying over
every entry except the last. Now we do the copy and just
set the last buffer entry to null.
Change-Id: Ic06ef0b8e15d8f1fe669fb88439851ffbad560de
Signed-off-by: Mike J. Chen <mjchen@google.com>
Nitin Arora [Fri, 11 Jul 2014 01:40:18 +0000 (01:40 +0000)]
am
02d9b7b4: Bluetooth: Increase number of allowed notifications
* commit '
02d9b7b41f1fcf21e798a4c0aabde89f00729d08':
Bluetooth: Increase number of allowed notifications
Nitin Arora [Fri, 11 Jul 2014 01:40:17 +0000 (01:40 +0000)]
am
7475a509: Bluetooth: Adds SMP response timer for security request
* commit '
7475a5098339d763aa6e3a0374ee2f1c16e002c4':
Bluetooth: Adds SMP response timer for security request
Priti Aghera [Fri, 11 Jul 2014 01:40:17 +0000 (01:40 +0000)]
am
156c52bb: Send correct status for SMP AUTH failure
* commit '
156c52bb003a14147db99d8a151edc08f591bd34':
Send correct status for SMP AUTH failure
Nitin Arora [Thu, 9 Jan 2014 22:27:25 +0000 (14:27 -0800)]
Bluetooth: Increase number of allowed notifications
This change increase the maximum number of notifications
that can be registered for LE remote devices.
This count is increase from 7 to 15.
Change-Id: I422704e9bae69c48b731757526ed9ee4055aa643
Nitin Arora [Fri, 21 Feb 2014 02:52:41 +0000 (18:52 -0800)]
Bluetooth: Adds SMP response timer for security request
This adds timer to cancel security request from remote if there
is no response from user for pairing popup.
Change-Id: I18694dcc5275a1eb10de4ad921b6baca189b42fa
Mike J. Chen [Sat, 12 Jul 2014 00:57:09 +0000 (00:57 +0000)]
Merge "Fix deadlock and non-working socket msg throttling"
Mike J. Chen [Tue, 1 Jul 2014 19:15:12 +0000 (12:15 -0700)]
Fix GKI buffer leak in GATT event handling
The GATT event handler was telling the BTA dispatcher that
it would always free the GKI msg buffers itself, but in fact
this wasn't true. There were some cases where the buffer is
queued and freed later (queued in p_clcb->p_q_cmd for later
access and freeing), but many times the event handlers
(like bta_gattc_ci_save()) don't queue the buffer and don't
free it, causing a GKI buffer leak.
Also, prevent a double free case (not certain it happens, but
in theory it could) if bta_gattc_sm_execute() queues a buffer
in bta_gattc_disc_cmpl().
Lastly, remove held flag since it's redundant with whether
p_q_cmd is null or not. Just go with one source of truth and
not have one shadow the other.
Change-Id: I1bd43919b8a2e125076e26cd6a3a08480b3e7e2d
Signed-off-by: Mike J. Chen <mjchen@google.com>
Priti Aghera [Wed, 9 Jul 2014 21:58:19 +0000 (14:58 -0700)]
Send correct status for SMP AUTH failure
Send correct corresponding status for SMP AUTH failure to JAVA layer.
This will enable BluetoothEventManager to display correct error message
for bond state changed callback.
Bug
15677623
Change-Id: I6a8742926bac862f960890417b5d68c23b33e010
Andre Eisenbach [Wed, 9 Jul 2014 21:35:39 +0000 (21:35 +0000)]
Merge "Fix GKI timers to take execution time into account"
Andre Eisenbach [Mon, 7 Jul 2014 18:29:34 +0000 (11:29 -0700)]
Fix GKI timers to take execution time into account
Previously, the GKI timer system would not take the time taken for
updating the timers into account when re-scheduling the next timer. This
would by design introduce timer drift into the system.
This patch measures the time taken for an alarm to be triggered to
report the correct number of ticks to the GKI timer subsystem, as well
as measuring the time taken for updating the timers to adjust the next
alarm accordingly.
This patch dramatically improves A2DP audio quality on various devices
which currently suffer timer drift problems.
Change-Id: Ia99454abcb2a6889c47b1d8e267705f29ebe7b64
Sharvil Nanavati [Sun, 6 Jul 2014 04:31:25 +0000 (21:31 -0700)]
Add template doc for Android properties used by bluedroid.
Change-Id: Idafbaa69161a7fa01a381d9b4fc5d9f41bc5695f
Andre Eisenbach [Wed, 9 Jul 2014 17:03:00 +0000 (17:03 +0000)]
Merge "Prevent A2DP bit pool calculation endless loops."
Sharvil Nanavati [Sun, 6 Jul 2014 03:42:07 +0000 (20:42 -0700)]
Expose semaphore's file descriptor.
|semaphore_get_fd| can be used by callers to determine if it's safe
to call |semaphore_wait| and |semaphore_post| without blocking.
Change-Id: Icf758f03ea2aa85cddcb4ab3f7906b2c587fb8ac
Sharvil Nanavati [Thu, 8 May 2014 05:09:12 +0000 (22:09 -0700)]
Start of threading library
So far it's a thin shim around pthreads which allows setting thread
name and querying tids from any thread.
Change-Id: Id156f662778806a54a8a302be424ee051fac4710
Andre Eisenbach [Tue, 8 Jul 2014 19:33:38 +0000 (12:33 -0700)]
Prevent A2DP bit pool calculation endless loops.
This prevents log spam and endless loops in the A2DP bit pool
calculation. Protecting against the endless loop with prevent battery
draining issues and phone unresponsiveness.
This patch addresses the symptom. A separate patch will be submitted
once root cause is determined to address the problem.
Change-Id: I045b724c1c1638551b9333249f39eee109fa9ba1
lungtsai_lin [Wed, 2 Jul 2014 12:39:02 +0000 (20:39 +0800)]
Bluetooth: Rename BTA_AVK_INCLUDED flag to BTA_AV_SINK_INCLUDED (bt_target.h)
Now OEM could enable/disable A2DP SINK role
Change-Id: I62cf17b0397a86c5f886a2c1ca724ca77a7f9bd4
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Matthew Xie [Sat, 5 Jul 2014 19:50:41 +0000 (19:50 +0000)]
Merge "DO NOT MERGE: Send to local UUID for AV connection" into klp-wireless-dev
Sharvil Nanavati [Mon, 23 Jun 2014 23:30:46 +0000 (16:30 -0700)]
Implement the reactor pattern in C.
This code will form the basis of most select-based event loops in
bluedroid. It provides a thread-safe abort routine and a separation
between the dispatcher and event handler code.
Change-Id: I6f1c033d18f045ba273187dab607c209dfe32d30
Ravi Nagarajan [Wed, 2 Jul 2014 10:15:34 +0000 (03:15 -0700)]
DO NOT MERGE: Send to local UUID for AV connection
BTA expects local UUID to be passed into BTA_AvOpen. The value of source/sink
was reversed in the btif layer thus causing connection failure
bug
15837817
Change-Id: If159ac0491afcb75659336c98caba3cefe71ee7b
Wei Wang [Wed, 2 Jul 2014 19:05:46 +0000 (19:05 +0000)]
Merge "Code cleanup - remove unnecessary commented out code" into klp-wireless-dev
Wei Wang [Wed, 2 Jul 2014 18:34:08 +0000 (11:34 -0700)]
Code cleanup - remove unnecessary commented out code
Change-Id: I86e78d1b0470b9fda7455ae8ef5788814cf5c780
Eric Laurent [Sun, 6 Jul 2014 17:07:59 +0000 (17:07 +0000)]
Merge "audio: deprecate audio_stream_frame_size()"
Matthew Xie [Sat, 5 Jul 2014 19:53:58 +0000 (19:53 +0000)]
am
85b4ee5d: (-s ours) Merge "DO NOT MERGE: Send to local UUID for AV connection" into klp-wireless-dev
* commit '
85b4ee5df4208fd06e836f40d7a19a84545f4e93':
DO NOT MERGE: Send to local UUID for AV connection
Eric Laurent [Thu, 3 Jul 2014 23:09:53 +0000 (16:09 -0700)]
audio: deprecate audio_stream_frame_size()
Bug:
15000850.
Change-Id: I1edcc78561cdc328ae0d91a1d07b0836ca5e1715
Narayan Kamath [Thu, 3 Jul 2014 10:48:20 +0000 (11:48 +0100)]
Fix signed - unsigned comparison in bluedroid test.
Change-Id: I702e9406a31424f27de2b600cb55c92e255917dd
Sharvil Nanavati [Thu, 3 Jul 2014 06:35:53 +0000 (06:35 +0000)]
am
19084c62: Implement the reactor pattern in C.
* commit '
19084c6242d8ddb366a52eba5084c974280cce0f':
Implement the reactor pattern in C.
Wei Wang [Wed, 2 Jul 2014 19:09:15 +0000 (19:09 +0000)]
am
b3c61229: Merge "Code cleanup - remove unnecessary commented out code" into klp-wireless-dev
* commit '
b3c61229ccf38ea3f398f93902d348ba12a7fb07':
Code cleanup - remove unnecessary commented out code
Matthew Xie [Wed, 2 Jul 2014 07:36:33 +0000 (07:36 +0000)]
am
a92c04f2: (-s ours) DO NOT MERGE Fix compilation issue
* commit '
a92c04f2dbd7f88853d6380d66c1f4d200674f97':
DO NOT MERGE Fix compilation issue
Matthew Xie [Wed, 2 Jul 2014 06:50:46 +0000 (12:20 +0530)]
DO NOT MERGE Fix compilation issue
This patch fixes broken compilation on KWD branch
Change-Id: I9a1da11e33e938910dc556ed3e015bd3456e21ef
Sharvil Nanavati [Wed, 2 Jul 2014 07:13:07 +0000 (00:13 -0700)]
Fix build: change macro call from _DEBUG0 to _DEBUG.
Change-Id: Iacbf4c33a7b690e2065471b85a6a4d82dd4a7fca
Matthew Xie [Wed, 2 Jul 2014 06:29:09 +0000 (06:29 +0000)]
am
23ae7c52: Merge "Added code to reuse the signal fds and avoid fd close" into klp-wireless-dev
* commit '
23ae7c526b529cf1c76c4a4cc8a341545493404d':
Added code to reuse the signal fds and avoid fd close
git-zhenye.broadcom.com [Wed, 2 Jul 2014 06:29:09 +0000 (06:29 +0000)]
am
359895ef: Fixed deadlock issue for concurrent multiple rfcomm connections.
* commit '
359895efb36a7e4f65fbcc9a28221b6ede44aadd':
Fixed deadlock issue for concurrent multiple rfcomm connections.
Sharvil Nanavati [Wed, 2 Jul 2014 00:11:24 +0000 (17:11 -0700)]
Use POSIX timer for non-wake alarms in bluedroid.
After this change, bluedroid will go through AlarmManager for wake
alarms (>= 3s) and POSIX timers + wake lock for short deadlines.
This change allows A2DP to continue streaming while the screen is
off.
Change-Id: I56622a6873aa431842dd1d97e830849ac2fe6773
Sharvil Nanavati [Mon, 30 Jun 2014 01:10:15 +0000 (18:10 -0700)]
Remove more unused code from GKI timers.
Change-Id: I4fc3a64312b49a3dd23d80454244f8eb6340d8e6
Sharvil Nanavati [Mon, 30 Jun 2014 00:36:56 +0000 (17:36 -0700)]
Remove more unused code from GKI.
Specifically:
- ISR code (since bluedroid is entirely userspace)
- logging macros
- newlines in log macros
- GKI_get_time_stamp (unused function)
- GKI_freeze
- unused timer variables and macros
Change-Id: I8e0676c28842d87c4148059ebb0320367658bc16
Mike Lockwood [Wed, 2 Jul 2014 02:21:30 +0000 (19:21 -0700)]
Fix problem with A2DP initialization due to merge error
btif_av_init() would fail when called a second time due to
erroneous nulling of btif_av_cb.sm_handle
Bug:
16014877
Change-Id: I7e6b213759e93372ac8ecaadc2b81452572f3f7d
Matthew Xie [Wed, 2 Jul 2014 06:28:12 +0000 (06:28 +0000)]
Merge "Added code to reuse the signal fds and avoid fd close" into klp-wireless-dev
git-zhenye.broadcom.com [Fri, 20 Jun 2014 00:28:53 +0000 (17:28 -0700)]
Added code to reuse the signal fds and avoid fd close
Bug
15436535
Change-Id: Ica5b1915dd94699eb19c57b6904154493b0cc08c
git-zhenye.broadcom.com [Thu, 12 Jun 2014 23:52:46 +0000 (16:52 -0700)]
Fixed deadlock issue for concurrent multiple rfcomm connections.
Bug
15469934
Change-Id: I77a3dc97c92f0ccd5764220e8e0bf5c0689d7b12
Hemant Gupta [Fri, 18 Apr 2014 07:24:08 +0000 (12:54 +0530)]
Bluetooth: Support MAP Client role on Bluedroid.
Implementation changes from BTA and BTIF layer to support
MCE role on Bluedroid stack.
Change-Id: I8547b0f28338e83edabae969121872ca23fdcb36
Mike Lockwood [Tue, 1 Jul 2014 03:30:09 +0000 (20:30 -0700)]
Fix audio HAL build (make it a shared library again)
Bug:
15978121
Change-Id: I23ba30f27b73b48a1d9128d294641367bfffa810
Satya Calloji [Tue, 1 Jul 2014 01:08:03 +0000 (01:08 +0000)]
am
7ae3f9ee: LE Onfound and Onlost feature
* commit '
7ae3f9eebc4e930d51e6b61f845ffd0f9a8cb9f8':
LE Onfound and Onlost feature
Satya Calloji [Tue, 1 Jul 2014 01:08:03 +0000 (01:08 +0000)]
am
5e177043: (-s ours) LE ADV Filter changes
* commit '
5e177043e3dfcd70676761a40425179d16c4a7ce':
LE ADV Filter changes
Richie Hsieh [Thu, 17 Apr 2014 14:39:31 +0000 (22:39 +0800)]
Add BOARD_BLUETOOTH_BDROID_HCILP_INCLUDED
Added CleanSpec.mk change
Signed-off-by: Richie Hsieh <richie.hsieh@mediatek.com>
Change-Id: Ice2a514f3d24859dbf091aae30e5c8781e90b7fd
(cherry picked from commit
d343338cb4c42e62ac97c451bc23fb36d9b58d3f)
Satya Calloji [Tue, 1 Jul 2014 01:02:50 +0000 (01:02 +0000)]
am
b9b1f4e7: (-s ours) LE batch scan feature
* commit '
b9b1f4e7a5cc96c57873a991f4ea3c3c08934c26':
LE batch scan feature
Satya Calloji [Sun, 15 Jun 2014 06:16:18 +0000 (23:16 -0700)]
LE Onfound and Onlost feature
BTIF and stack layer changes for onfound/onlost feature
DO NOT MERGE
Change-Id: Id52cdd5855ca8c0ff276b42613b51c4cd3882bfc
Satya Calloji [Thu, 5 Jun 2014 20:15:15 +0000 (13:15 -0700)]
LE ADV Filter changes
BTIF and stack layer changes for ADV filter feature
DO NOT MERGE
Change-Id: I865e57c41802751e172248547b8510598261ec94
Satya Calloji [Sun, 11 May 2014 06:46:24 +0000 (23:46 -0700)]
LE batch scan feature
BTIF and stack changes for batch scan feature
DO NOT MERGE
Change-Id: I4dd2d551435e9f1f0e43906bd695294e97ed4bba
Matthew Xie [Mon, 30 Jun 2014 22:37:13 +0000 (22:37 +0000)]
am
66432dcf: Add WBS support on Bluedroid (2/6)
* commit '
66432dcffe211e317d35978283a04a96d5620bdf':
Add WBS support on Bluedroid (2/6)
Matthew Xie [Sun, 27 Apr 2014 12:45:32 +0000 (05:45 -0700)]
Add WBS support on Bluedroid (2/6)
Bug
13764086
Change-Id: I12bf302f7dd19efb497ad49d4d1d638a7a926049
Satya Calloji [Sun, 15 Jun 2014 06:16:18 +0000 (23:16 -0700)]
LE Onfound and Onlost feature
BTIF and stack layer changes for onfound/onlost feature
Change-Id: Id52cdd5855ca8c0ff276b42613b51c4cd3882bfc
Satya Calloji [Thu, 5 Jun 2014 20:15:15 +0000 (13:15 -0700)]
LE ADV Filter changes
BTIF and stack layer changes for ADV filter feature
Change-Id: I865e57c41802751e172248547b8510598261ec94
Satya Calloji [Sun, 11 May 2014 06:46:24 +0000 (23:46 -0700)]
LE batch scan feature
BTIF and stack changes for batch scan feature
Change-Id: I4dd2d551435e9f1f0e43906bd695294e97ed4bba
Nitin Arora [Mon, 30 Jun 2014 19:25:19 +0000 (19:25 +0000)]
am
021e17a6: Clear background conn list entries during BT power off
* commit '
021e17a641e61e3f139717cd755bf6f9b9b9eb12':
Clear background conn list entries during BT power off
Andre Eisenbach [Mon, 30 Jun 2014 19:25:19 +0000 (19:25 +0000)]
am
9279e000: Merge "Bluetooth: Updates background conn list properly during unpair" into klp-wireless-dev
* commit '
9279e0003d43be077d2c2d7a3e5163db960a1150':
Bluetooth: Updates background conn list properly during unpair
Nitin Arora [Thu, 30 Jan 2014 03:18:39 +0000 (19:18 -0800)]
Clear background conn list entries during BT power off
This clears whitelist entries and resets bgconn device lists
Change-Id: I551791d63fa826071c113abd383540838f6c59b2
Richie Hsieh [Wed, 25 Jun 2014 23:32:49 +0000 (16:32 -0700)]
LE: Fix HOGP connection issues caused by incorrect HCI packet flags
Do not set the automatically-flushable packet flag for LE bound HCI
packets (Packet_Boundary_Flag 0b10).
Reported-by: Richie Hsieh <richie.hsieh@mediatek.com>
Change-Id: Id71a096acee70582923e652cfef1f4141b721fed
Hemant Gupta [Sun, 29 Jun 2014 19:36:13 +0000 (19:36 +0000)]
am
d9e2d0f1: Bluetooth: Restarting PM timer during incoming rfcomm data.
* commit '
d9e2d0f1fa19f737632e82c24ba278990b8a7548':
Bluetooth: Restarting PM timer during incoming rfcomm data.
Hemant Gupta [Sun, 29 Jun 2014 19:36:12 +0000 (19:36 +0000)]
am
e146869f: GAP: Remove device info from storage on Pairing Cancel
* commit '
e146869fec903400e601d2ac7b0a59bd05934f0e':
GAP: Remove device info from storage on Pairing Cancel
Hemant Gupta [Sun, 29 Jun 2014 19:36:12 +0000 (19:36 +0000)]
am
b4801441: GAP:Add authentication failed error code in auth_compl_evt.
* commit '
b4801441a5b7a093bc78f2143a8ed28605c51dc6':
GAP:Add authentication failed error code in auth_compl_evt.
Hemant Gupta [Sun, 29 Jun 2014 18:53:55 +0000 (18:53 +0000)]
am
aef7a671: [2/2] Bluetooth: Security: Handle authentication rejected error status
* commit '
aef7a6716e72e9304af36469500ee53c97350c21':
[2/2] Bluetooth: Security: Handle authentication rejected error status
Hemant Gupta [Sun, 29 Jun 2014 18:23:40 +0000 (18:23 +0000)]
am
59a88ec2: Bluetooth: Handle missing key event
* commit '
59a88ec207ead601c7ba5e767fd1373c7f2df70b':
Bluetooth: Handle missing key event
Hemant Gupta [Sun, 29 Jun 2014 18:23:40 +0000 (18:23 +0000)]
am
831423ea: Bluetooth: Fix to avoid NULL pointer dereferences
* commit '
831423ea1879244e746f39d7696ad4a66681f306':
Bluetooth: Fix to avoid NULL pointer dereferences
Hemant Gupta [Sun, 29 Jun 2014 18:23:39 +0000 (18:23 +0000)]
am
c8fe2925: GAP: Retain the old COD if already present
* commit '
c8fe2925af4f5b167b615a0677adebbd156a4387':
GAP: Retain the old COD if already present
Hemant Gupta [Sun, 29 Jun 2014 18:10:19 +0000 (18:10 +0000)]
am
79f454dc: L2CAP: Send HCI connect with all packet types supported
* commit '
79f454dc544280cc1a3ca3acc643f7dddfe91cd9':
L2CAP: Send HCI connect with all packet types supported
Hemant Gupta [Mon, 30 Sep 2013 12:56:03 +0000 (18:26 +0530)]
Bluetooth: Restarting PM timer during incoming rfcomm data.
During incoming rfcomm data, we were setting the pm mode to
active, thereby stopping timer and never restarting it again.
So Dut was never going to sniff , if the last packet is incoming
packet. Therefore add change to restart the PM timer during incoming
data.
Change-Id: I4396bb2f267b12cb92a944c15609ddeaa13288ad
Hemant Gupta [Thu, 14 Nov 2013 10:51:29 +0000 (16:21 +0530)]
GAP: Remove device info from storage on Pairing Cancel
Remove paired device information for SSP devices from the BT-IF
layer storage on pairing cancel.
Change-Id: I4660e3659866bd66339350b5cdb92bf3ad3cc850
Hemant Gupta [Tue, 7 Jan 2014 12:41:15 +0000 (18:11 +0530)]
GAP:Add authentication failed error code in auth_compl_evt.
There is an unhandle failed HCI error code when pairing with
symbian OS phone nokia n95 which will cause no prompt when
auth failed.
Change-Id: I3a37c7732d1bf71c090bb968380d8c5f0af2ff79
Hemant Gupta [Wed, 31 Jul 2013 13:30:12 +0000 (19:00 +0530)]
[2/2] Bluetooth: Security: Handle authentication rejected error status
Handle error codes in authentication complete event with failures
like reject pairing , unspecified error.
Change-Id: I392b7531a8625efbf91bf80f7f617a6954229892
Hemant Gupta [Wed, 19 Mar 2014 13:31:35 +0000 (19:01 +0530)]
Bluetooth: Handle missing key event
This change handles HCI_ERR_KEY_MISSING event
coming to the stack when user doesn't enter any
key and timeout happens.
Change-Id: If530e8acce3f105e4f1e2841bf350ee5330f389e
Hemant Gupta [Wed, 8 Jan 2014 07:12:13 +0000 (12:42 +0530)]
Bluetooth: Fix to avoid NULL pointer dereferences
This fix for avoiding NULL pointer dereferences:
- Added check for state checking in btm_remove_acl function
to avoid sending disconnect command if already in Disconnecting
state.
- Added NULL check for 'pin_code' in btif_dm_pin_reply function
- Null check before accessing in BD interface layer configuration
node variables.
- Add NULL check before accessing p_bd_addr variable to avoid null
pointer exception while referring to invalid memory.
Change-Id: Ib7ed45b6a1692785a45224d739a564f767e5b10f
Hemant Gupta [Wed, 30 Oct 2013 14:40:04 +0000 (20:10 +0530)]
GAP: Retain the old COD if already present
Retain the old COD as the initial value if the device
entry already present in the list and entry is not in use.
Change-Id: I99b7269b1976ef7458c6568441e6e3c1e015a75f
Hemant Gupta [Tue, 30 Jul 2013 12:21:48 +0000 (17:51 +0530)]
L2CAP: Send HCI connect with all packet types supported
HCI create connect function is now supporting only single slot packet
during HCI connection initiation. Added support for all basic rate
packet types.
Change-Id: Ieeb892ea43dc9bb801a8f97a644a0f8c06b8184a
Matthew Xie [Sun, 29 Jun 2014 05:18:28 +0000 (05:18 +0000)]
am
96cdc153: Merge "GAP: Handle invalid SDP service search request" into klp-wireless-dev
* commit '
96cdc153002c82d959f132d6e6804b516228ff32':
GAP: Handle invalid SDP service search request
Matthew Xie [Sun, 29 Jun 2014 05:18:27 +0000 (05:18 +0000)]
am
08b1c8d9: Merge "GAP: Handled collision scenerio with headset" into klp-wireless-dev
* commit '
08b1c8d9147c253fecd34686b0c4dcd5b78cc778':
GAP: Handled collision scenerio with headset
Sharvil Nanavati [Sun, 29 Jun 2014 05:10:07 +0000 (05:10 +0000)]
am
f844e6ea: Fix build: remove bte_version.c from makefile since it\'s not in the tree.
* commit '
f844e6ea7bf26589c0c00a135451c0279e6b177a':
Fix build: remove bte_version.c from makefile since it's not in the tree.
Sharvil Nanavati [Sun, 29 Jun 2014 05:03:24 +0000 (22:03 -0700)]
Fix build: remove bte_version.c from makefile since it's not in the tree.
Change-Id: I4e488cadd2b52e41ec83e4b2acac2dd7f9ca5b61
Sharvil Nanavati [Sun, 29 Jun 2014 04:25:41 +0000 (04:25 +0000)]
am
f0952b52: Add a flexible array to the end of BT_HDR to avoid pointer arithmetic.
* commit '
f0952b522e3326b79b146e7c3c59fa3b29d59de6':
Add a flexible array to the end of BT_HDR to avoid pointer arithmetic.
Sharvil Nanavati [Sun, 29 Jun 2014 04:21:20 +0000 (04:21 +0000)]
am
5055c9d0: Eliminate HCI flow control. It is not used anywhere in the codebase.
* commit '
5055c9d0061aaa451de9ee33d6d2d2716f188e0f':
Eliminate HCI flow control. It is not used anywhere in the codebase.