OSDN Git Service
Michael Ellerman [Tue, 21 Jan 2020 04:29:53 +0000 (15:29 +1100)]
powerpc/configs: Drop NET_VENDOR_HP which moved to staging
The HP network driver moved to staging in commit
52340b82cf1a ("hp100:
Move 100BaseVG AnyLAN driver to staging") meaning we don't need to
disable it any more in our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200121043000.16212-3-mpe@ellerman.id.au
Michael Ellerman [Tue, 21 Jan 2020 04:29:52 +0000 (15:29 +1100)]
powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE
The NET_CADENCE symbol was renamed to NET_VENDOR_CADENCE, so we don't
need to disable the former, see commit
0df5f81c481e ("net: ethernet:
Add missing VENDOR to Cadence and Packet Engines symbols").
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200121043000.16212-2-mpe@ellerman.id.au
Michael Ellerman [Tue, 21 Jan 2020 04:29:51 +0000 (15:29 +1100)]
powerpc/configs: Drop CONFIG_QLGE which moved to staging
The QLGE driver moved to staging in commit
955315b0dc8c ("qlge: Move
drivers/net/ethernet/qlogic/qlge/ to drivers/staging/qlge/"), meaning
our defconfigs that enable it have no effect as we don't enable
CONFIG_STAGING.
It sounds like the device is obsolete, so drop the driver.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200121043000.16212-1-mpe@ellerman.id.au
Alexandre Ghiti [Sat, 18 Jan 2020 17:03:35 +0000 (12:03 -0500)]
powerpc: Do not consider weak unresolved symbol relocations as bad
Commit
8580ac9404f6 ("bpf: Process in-kernel BTF") introduced two weak
symbols that may be unresolved at link time which result in an absolute
relocation to 0. relocs_check.sh emits the following warning:
"WARNING: 2 bad relocations
c000000001a41478 R_PPC64_ADDR64 _binary__btf_vmlinux_bin_start
c000000001a41480 R_PPC64_ADDR64 _binary__btf_vmlinux_bin_end"
whereas those relocations are legitimate even for a relocatable kernel
compiled with -pie option.
relocs_check.sh already excluded some weak unresolved symbols explicitly:
remove those hardcoded symbols and add some logic that parses the symbols
using nm, retrieves all the weak unresolved symbols and excludes those from
the list of the potential bad relocations.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200118170335.21440-1-alex@ghiti.fr
Christophe Leroy [Wed, 29 Jan 2020 12:34:36 +0000 (12:34 +0000)]
powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK
On book3s/32 CPUs that are handling MMU through a hash table,
MMU_init_hw() function was adapted for VMAP_STACK in order to
handle virtual addresses instead of physical addresses in the
low level hash functions.
When using KASAN, the same adaptations are required for the
early hash table set up by kasan_early_hash_table() function.
Fixes:
cd08f109e262 ("powerpc/32s: Enable CONFIG_VMAP_STACK")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fc8390a33c2a470105f01abbcbdc7916c30c0a54.1580301269.git.christophe.leroy@c-s.fr
Randy Dunlap [Wed, 29 Jan 2020 02:22:25 +0000 (18:22 -0800)]
powerpc: indent to improve Kconfig readability
Indent a Kconfig continuation line to improve readability.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ff8729c1-3a4b-c720-48ba-a1a42b0ef892@infradead.org
Vaibhav Jain [Wed, 28 Aug 2019 08:27:29 +0000 (13:57 +0530)]
powerpc: Provide initial documentation for PAPR hcalls
This doc patch provides an initial description of the hcall op-codes
that are used by Linux kernel running as a guest (LPAR) on top of
PowerVM or any other sPAPR compliant hyper-visor (e.g qemu).
Apart from documenting the hcalls the doc-patch also provides a
rudimentary overview of how hcall ABI, how they are issued with the
Linux kernel and how information/control flows between the guest and
hypervisor.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add SPDX tag, add it to index.rst]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190828082729.16695-1-vaibhav@linux.ibm.com
Christophe Leroy [Mon, 27 Jan 2020 10:42:04 +0000 (10:42 +0000)]
powerpc/32s: Fix CPU wake-up from sleep mode
Commit
f7354ccac844 ("powerpc/32: Remove CURRENT_THREAD_INFO and
rename TI_CPU") broke the CPU wake-up from sleep mode (i.e. when
_TLF_SLEEPING is set) by delaying the tovirt(r2, r2).
This is because r2 is not restored by fast_exception_return. It used
to work (by chance ?) because CPU wake-up interrupt never comes from
user, so r2 is expected to point to 'current' on return.
Commit
e2fb9f544431 ("powerpc/32: Prepare for Kernel Userspace Access
Protection") broke it even more by clobbering r0 which is not
restored by fast_exception_return either.
Use r6 instead of r0. This is possible because r3-r6 are restored by
fast_exception_return and only r3-r5 are used for exception arguments.
For r2 it could be converted back to virtual address, but stay on the
safe side and restore it from the stack instead. It should be live
in the cache at that moment, so loading from the stack should make
no difference compared to converting it from phys to virt.
Fixes:
f7354ccac844 ("powerpc/32: Remove CURRENT_THREAD_INFO and rename TI_CPU")
Fixes:
e2fb9f544431 ("powerpc/32: Prepare for Kernel Userspace Access Protection")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6d02c3ae6ad77af34392e98117e44c2bf6d13ba1.1580121710.git.christophe.leroy@c-s.fr
Christophe Leroy [Tue, 14 Jan 2020 17:54:04 +0000 (17:54 +0000)]
powerpc/32: Reuse orphaned memblocks in kasan_init_shadow_page_tables()
If concurrent PMD population has happened, re-use orphaned memblocks.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b29ffffb9206dc14541fa420c17604240728041b.1579024426.git.christophe.leroy@c-s.fr
Christophe Leroy [Tue, 14 Jan 2020 17:54:03 +0000 (17:54 +0000)]
powerpc/32: Simplify KASAN init
Since kasan_init_region() is not used anymore for modules,
KASAN init is done while slab_is_available() is false.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/84b27bf08b41c8343efd88e10f2eccd8e9f85593.1579024426.git.christophe.leroy@c-s.fr
Christophe Leroy [Tue, 14 Jan 2020 17:54:02 +0000 (17:54 +0000)]
powerpc/32: Force KASAN_VMALLOC for modules
Unloading/Reloading of modules seems to fail with KASAN_VMALLOC
but works properly with it.
Force selection of KASAN_VMALLOC when MODULES are selected, and
drop module_alloc() which was dedicated to KASAN for modules.
Reported-by: <erhard_f@mailbox.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205283
Link: https://lore.kernel.org/r/f909da11aecb59ab7f32ba01fae6f356eaa4d7bc.1579024426.git.christophe.leroy@c-s.fr
Christophe Leroy [Tue, 14 Jan 2020 17:54:01 +0000 (17:54 +0000)]
powerpc/kconfig: Move CONFIG_PPC32 into Kconfig.cputype
Move CONFIG_PPC32 at the same place as CONFIG_PPC64 for consistency.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6f28085c2a1aa987093d50db17586633bbf8e206.1579024426.git.christophe.leroy@c-s.fr
Christophe Leroy [Tue, 14 Jan 2020 17:54:00 +0000 (17:54 +0000)]
powerpc/32: Add support of KASAN_VMALLOC
Add support of KASAN_VMALLOC on PPC32.
To allow this, the early shadow covering the VMALLOC space
need to be removed once high_memory var is set and before
freeing memblock.
And the VMALLOC area need to be aligned such that boundaries
are covered by a full shadow page.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/031dec5487bde9b2181c8b3c9800e1879cf98c1a.1579024426.git.christophe.leroy@c-s.fr
Christophe Leroy [Mon, 23 Dec 2019 07:54:22 +0000 (07:54 +0000)]
powerpc/mm: Don't log user reads to 0xffffffff
Running vdsotest leaves many times the following log:
[ 79.629901] vdsotest[396]: User access of kernel address (
ffffffff) - exploit attempt? (uid: 0)
A pointer set to (-1) is likely a programming error similar to
a NULL pointer and is not worth logging as an exploit attempt.
Don't log user accesses to 0xffffffff.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0728849e826ba16f1fbd6fa7f5c6cc87bd64e097.1577087627.git.christophe.leroy@c-s.fr
Christophe Leroy [Sat, 21 Dec 2019 08:32:38 +0000 (08:32 +0000)]
powerpc/32s: Enable CONFIG_VMAP_STACK
A few changes to retrieve DAR and DSISR from struct regs
instead of retrieving them directly, as they may have
changed due to a TLB miss.
Also modifies hash_page() and friends to work with virtual
data addresses instead of physical ones. Same on load_up_fpu()
and load_up_altivec().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Fix tovirt_vmstack call in head_32.S to fix CHRP build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2e2509a242fd5f3e23df4a06530c18060c4d321e.1576916812.git.christophe.leroy@c-s.fr
Christophe Leroy [Sat, 21 Dec 2019 08:32:37 +0000 (08:32 +0000)]
powerpc/32s: Avoid crossing page boundary while changing SRR0/1.
Trying VMAP_STACK with KVM, vmlinux was not starting.
This was due to SRR0 and SRR1 clobbered by an ISI due to
the rfi being in a different page than the mtsrr0/1:
c0003fe0 <mmu_off>:
c0003fe0: 38 83 00 54 addi r4,r3,84
c0003fe4: 7c 60 00 a6 mfmsr r3
c0003fe8: 70 60 00 30 andi. r0,r3,48
c0003fec: 4d 82 00 20 beqlr
c0003ff0: 7c 63 00 78 andc r3,r3,r0
c0003ff4: 7c 9a 03 a6 mtsrr0 r4
c0003ff8: 7c 7b 03 a6 mtsrr1 r3
c0003ffc: 7c 00 04 ac hwsync
c0004000: 4c 00 00 64 rfi
Align the 4 instruction block used to deactivate MMU to order 4,
so that the block never crosses a page boundary.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/30d2cda111b7977227fff067fa7e358440e2b3a4.1576916812.git.christophe.leroy@c-s.fr
Christophe Leroy [Sat, 21 Dec 2019 08:32:36 +0000 (08:32 +0000)]
powerpc/32s: Reorganise DSI handler.
The part decidated to handling hash_page() is fully unneeded for
processors not having real hash pages like the 603.
Lets enlarge the content of the feature fixup, and provide
an alternative which jumps directly instead of getting NIPs.
Also, in preparation of VMAP stacks, the end of DSI handler has moved
to later in the code as it won't fit anymore once VMAP stacks
are there.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c31b22c91af8b011d0a4fd9e52ad6afb4b593f71.1576916812.git.christophe.leroy@c-s.fr
Christophe Leroy [Sat, 21 Dec 2019 08:32:35 +0000 (08:32 +0000)]
powerpc/8xx: Enable CONFIG_VMAP_STACK
This patch enables CONFIG_VMAP_STACK. For that, a few changes are
done in head_8xx.S.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d7ba1e34e80898310d6a314cbebe48baa32894ef.1576916812.git.christophe.leroy@c-s.fr
Michael Ellerman [Sat, 25 Jan 2020 13:20:16 +0000 (00:20 +1100)]
powerpc/8xx: Move tail of alignment exception out of line
When we enable VMAP_STACK there will not be enough room for the
alignment handler at 0x600 in head_8xx.S. For now move the tail of the
alignment handler out of line, and branch to it.
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Christophe Leroy [Sat, 21 Dec 2019 08:32:34 +0000 (08:32 +0000)]
powerpc/8xx: Split breakpoint exception
Breakpoint exception is big.
Split it to support future growth on exception prolog.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1dda3293d86d0f715b13b2633c95d2188a42a02c.1576916812.git.christophe.leroy@c-s.fr
Christophe Leroy [Sat, 21 Dec 2019 08:32:33 +0000 (08:32 +0000)]
powerpc/8xx: Move DataStoreTLBMiss perf handler
Move DataStoreTLBMiss perf handler in order to cope
with future growing exception prolog.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/75dd28b04efd2cbdbf01153173d99c11cdff2f08.1576916812.git.christophe.leroy@c-s.fr
Christophe Leroy [Sat, 21 Dec 2019 08:32:32 +0000 (08:32 +0000)]
powerpc/8xx: Drop exception entries for non-existing exceptions
head_8xx.S has entries for all exceptions from 0x100 to 0x1f00.
Several of them do not exist and are never generated by the 8xx
in accordance with the documentation.
Remove those entry points to make some room for future growing
exception code.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/66f92866fe9524cf0f056016921c7d53adaef3a0.1576916812.git.christophe.leroy@c-s.fr
Christophe Leroy [Sat, 21 Dec 2019 08:32:31 +0000 (08:32 +0000)]
powerpc/8xx: Use alternative scratch registers in DTLB miss handler
In preparation of handling CONFIG_VMAP_STACK, DTLB miss handler need
to use different scratch registers than other exception handlers in
order to not jeopardise exception entry on stack DTLB misses.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c5287ea59ae9630f505019b309bf94029241635f.1576916812.git.christophe.leroy@c-s.fr
Christophe Leroy [Sat, 21 Dec 2019 08:32:30 +0000 (08:32 +0000)]
powerpc/32: Use vmapped stacks for interrupts
In order to also catch overflows on IRQ stacks, use vmapped stacks.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d33ad1b36ddff4dcc19f96c592c12a61cf85d406.1576916812.git.christophe.leroy@c-s.fr
Christophe Leroy [Sat, 21 Dec 2019 08:32:29 +0000 (08:32 +0000)]
powerpc/32: Add early stack overflow detection with VMAP stack.
To avoid recursive faults, stack overflow detection has to be
performed before writing in the stack in exception prologs.
Do it by checking the alignment. If the stack pointer alignment is
wrong, it means it is pointing to the following or preceding page.
Without VMAP stack, a stack overflow is catastrophic. With VMAP
stack, a stack overflow isn't destructive, so don't panic. Kill
the task with SIGSEGV instead.
A dedicated overflow stack is set up for each CPU.
lkdtm: Performing direct entry EXHAUST_STACK
lkdtm: Calling function with 512 frame size to depth 32 ...
lkdtm: loop 32/32 ...
lkdtm: loop 31/32 ...
lkdtm: loop 30/32 ...
lkdtm: loop 29/32 ...
lkdtm: loop 28/32 ...
lkdtm: loop 27/32 ...
lkdtm: loop 26/32 ...
lkdtm: loop 25/32 ...
lkdtm: loop 24/32 ...
lkdtm: loop 23/32 ...
lkdtm: loop 22/32 ...
lkdtm: loop 21/32 ...
lkdtm: loop 20/32 ...
Kernel stack overflow in process test[359], r1=
c900c008
Oops: Kernel stack overflow, sig: 6 [#1]
BE PAGE_SIZE=4K MMU=Hash PowerMac
Modules linked in:
CPU: 0 PID: 359 Comm: test Not tainted 5.3.0-rc7+ #2225
NIP:
c0622060 LR:
c0626710 CTR:
00000000
REGS:
c0895f48 TRAP: 0000 Not tainted (5.3.0-rc7+)
MSR:
00001032 <ME,IR,DR,RI> CR:
28004224 XER:
00000000
GPR00:
c0626ca4 c900c008 c783c000 c07335cc c900c010 c07335cc c900c0f0 c07335cc
GPR08:
c900c0f0 00000001 00000000 00000000 28008222 00000000 00000000 00000000
GPR16:
00000000 00000000 10010128 10010000 b799c245 10010158 c07335cc 00000025
GPR24:
c0690000 c08b91d4 c068f688 00000020 c900c0f0 c068f668 c08b95b4 c08b91d4
NIP [
c0622060] format_decode+0x0/0x4d4
LR [
c0626710] vsnprintf+0x80/0x5fc
Call Trace:
[
c900c068] [
c0626ca4] vscnprintf+0x18/0x48
[
c900c078] [
c007b944] vprintk_store+0x40/0x214
[
c900c0b8] [
c007bf50] vprintk_emit+0x90/0x1dc
[
c900c0e8] [
c007c5cc] printk+0x50/0x60
[
c900c128] [
c03da5b0] recursive_loop+0x44/0x6c
[
c900c338] [
c03da5c4] recursive_loop+0x58/0x6c
[
c900c548] [
c03da5c4] recursive_loop+0x58/0x6c
[
c900c758] [
c03da5c4] recursive_loop+0x58/0x6c
[
c900c968] [
c03da5c4] recursive_loop+0x58/0x6c
[
c900cb78] [
c03da5c4] recursive_loop+0x58/0x6c
[
c900cd88] [
c03da5c4] recursive_loop+0x58/0x6c
[
c900cf98] [
c03da5c4] recursive_loop+0x58/0x6c
[
c900d1a8] [
c03da5c4] recursive_loop+0x58/0x6c
[
c900d3b8] [
c03da5c4] recursive_loop+0x58/0x6c
[
c900d5c8] [
c03da5c4] recursive_loop+0x58/0x6c
[
c900d7d8] [
c03da5c4] recursive_loop+0x58/0x6c
[
c900d9e8] [
c03da5c4] recursive_loop+0x58/0x6c
[
c900dbf8] [
c03da5c4] recursive_loop+0x58/0x6c
[
c900de08] [
c03da67c] lkdtm_EXHAUST_STACK+0x30/0x4c
[
c900de18] [
c03da3e8] direct_entry+0xc8/0x140
[
c900de48] [
c029fb40] full_proxy_write+0x64/0xcc
[
c900de68] [
c01500f8] __vfs_write+0x30/0x1d0
[
c900dee8] [
c0152cb8] vfs_write+0xb8/0x1d4
[
c900df08] [
c0152f7c] ksys_write+0x58/0xe8
[
c900df38] [
c0014208] ret_from_syscall+0x0/0x34
--- interrupt: c01 at 0xf806664
LR = 0x1000c868
Instruction dump:
4bffff91 80010014 7c832378 7c0803a6 38210010 4e800020 3d20c08a 3ca0c089
8089a0cc 38a58f0c 38600001 4ba2d494 <
9421ffe0>
7c0802a6 bfc10018 7c9f2378
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1b89c121b4070c7ee99e4f22cc178f15a736b07b.1576916812.git.christophe.leroy@c-s.fr
Christophe Leroy [Sat, 21 Dec 2019 08:32:28 +0000 (08:32 +0000)]
powerpc: align stack to 2 * THREAD_SIZE with VMAP_STACK
In order to ease stack overflow detection, align
stack to 2 * THREAD_SIZE when using VMAP_STACK.
This allows overflow detection using a single bit check.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/60e9ae86b7d2cdcf21468787076d345663648f46.1576916812.git.christophe.leroy@c-s.fr
Christophe Leroy [Sat, 21 Dec 2019 08:32:27 +0000 (08:32 +0000)]
powerpc/32: prepare for CONFIG_VMAP_STACK
To support CONFIG_VMAP_STACK, the kernel has to activate Data MMU
Translation for accessing the stack. Before doing that it must save
SRR0, SRR1 and also DAR and DSISR when relevant, in order to not
loose them in case there is a Data TLB Miss once the translation is
reactivated.
This patch adds fields in thread struct for saving those registers.
It prepares entry_32.S to handle exception entry with
Data MMU Translation enabled and alters EXCEPTION_PROLOG macros to
save SRR0, SRR1, DAR and DSISR then reenables Data MMU.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a775a1fea60f190e0f63503463fb775310a2009b.1576916812.git.christophe.leroy@c-s.fr
Christophe Leroy [Sat, 21 Dec 2019 08:32:26 +0000 (08:32 +0000)]
powerpc/32: add a macro to get and/or save DAR and DSISR on stack.
Refactor reading and saving of DAR and DSISR in exception vectors.
This will ease the implementation of VMAP stack.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1286b3e51b07727c6b4b05f2df9af3f9b1717fb5.1576916812.git.christophe.leroy@c-s.fr
Christophe Leroy [Sat, 21 Dec 2019 08:32:25 +0000 (08:32 +0000)]
powerpc/32: move MSR_PR test into EXCEPTION_PROLOG_0
In order to simplify VMAP stack implementation, move
MSR_PR test into EXCEPTION_PROLOG_0.
This requires to not modify cr0 between EXCEPTION_PROLOG_0
and EXCEPTION_PROLOG_1.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5c8b5bba692b92654dbd363a229a1ba91db725bb.1576916812.git.christophe.leroy@c-s.fr
Christophe Leroy [Sat, 21 Dec 2019 08:32:24 +0000 (08:32 +0000)]
powerpc/32: save DEAR/DAR before calling handle_page_fault
handle_page_fault() is the only function that save DAR/DEAR itself.
Save DAR/DEAR before calling handle_page_fault() to prepare for
VMAP stack which will require to save even before.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3a4d58d378091086f00fde42b59610c80289e120.1576916812.git.christophe.leroy@c-s.fr
Christophe Leroy [Sat, 21 Dec 2019 08:32:23 +0000 (08:32 +0000)]
powerpc/32: Add EXCEPTION_PROLOG_0 in head_32.h
This patch creates a macro for the very first part of
exception prolog, this will help when implementing
CONFIG_VMAP_STACK
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2249fe62f481121a180e9655ad2b998093f318f3.1576916812.git.christophe.leroy@c-s.fr
Christophe Leroy [Sat, 21 Dec 2019 08:32:22 +0000 (08:32 +0000)]
powerpc/32: replace MTMSRD() by mtmsr
On PPC32, MTMSRD() is simply defined as mtmsr.
Replace MTMSRD(reg) by mtmsr reg in files dedicated to PPC32,
this makes the code less obscure.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/22469e78230edea3dbd0c79a555d73124f6c6d93.1576916812.git.christophe.leroy@c-s.fr
Oliver O'Halloran [Wed, 22 Jan 2020 03:11:25 +0000 (14:11 +1100)]
selftests/eeh: Bump EEH wait time to 60s
Some newer cards supported by aacraid can take up to 40s to recover
after an EEH event. This causes spurious failures in the basic EEH
self-test since the current maximim timeout is only 30s.
Fix the immediate issue by bumping the timeout to a default of 60s,
and allow the wait time to be specified via an environmental variable
(EEH_MAX_WAIT).
Reported-by: Steve Best <sbest@redhat.com>
Suggested-by: Douglas Miller <dougmill@us.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200122031125.25991-1-oohall@gmail.com
Michael Bringmann [Wed, 15 Jan 2020 14:53:59 +0000 (08:53 -0600)]
powerpc/pseries/lparcfg: Fix display of Maximum Memory
Correct overflow problem in calculation and display of Maximum Memory
value to syscfg.
Signed-off-by: Michael Bringmann <mwb@linux.ibm.com>
[mpe: Only n_lmbs needs casting to unsigned long]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5577aef8-1d5a-ca95-ff0a-9c7b5977e5bf@linux.ibm.com
Jordan Niethe [Fri, 6 Dec 2019 03:17:22 +0000 (14:17 +1100)]
powerpc/mm: Remove kvm radix prefetch workaround for Power9 DD2.2
Commit
a25bd72badfa ("powerpc/mm/radix: Workaround prefetch issue with
KVM") introduced a number of workarounds as coming out of a guest with
the mmu enabled would make the cpu would start running in hypervisor
state with the PID value from the guest. The cpu will then start
prefetching for the hypervisor with that PID value.
In Power9 DD2.2 the cpu behaviour was modified to fix this. When
accessing Quadrant 0 in hypervisor mode with LPID != 0 prefetching will
not be performed. This means that we can get rid of the workarounds for
Power9 DD2.2 and later revisions. Add a new cpu feature
CPU_FTR_P9_RADIX_PREFETCH_BUG to indicate if the workarounds are needed.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191206031722.25781-1-jniethe5@gmail.com
Vaibhav Jain [Wed, 22 Jan 2020 15:51:40 +0000 (21:21 +0530)]
powerpc/papr_scm: Fix leaking 'bus_desc.provider_name' in some paths
String 'bus_desc.provider_name' allocated inside
papr_scm_nvdimm_init() will leaks in case call to
nvdimm_bus_register() fails or when papr_scm_remove() is called.
This minor patch ensures that 'bus_desc.provider_name' is freed in
error path for nvdimm_bus_register() as well as in papr_scm_remove().
Fixes:
b5beae5e224f ("powerpc/pseries: Add driver for PAPR SCM regions")
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200122155140.120429-1-vaibhav@linux.ibm.com
Sukadev Bhattiprolu [Thu, 23 Jan 2020 00:57:18 +0000 (18:57 -0600)]
powerpc/xmon: Fix compile error in print_insn* functions
Fix couple of compile errors I stumbled upon with CONFIG_XMON=y and
CONFIG_XMON_DISASSEMBLY=n
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200123010455.GA15080@us.ibm.com
Christophe Leroy [Thu, 23 Jan 2020 17:30:47 +0000 (17:30 +0000)]
powerpc: use probe_user_read() and probe_user_write()
Instead of opencoding, use probe_user_read() to failessly read
a user location and probe_user_write() for writing to user.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e041f5eedb23f09ab553be8a91c3de2087147320.1579800517.git.christophe.leroy@c-s.fr
Chen Zhou [Tue, 21 Jan 2020 01:31:53 +0000 (09:31 +0800)]
powerpc/maple: Fix comparing pointer to 0
Fixes coccicheck warning:
arch/powerpc/platforms/maple/setup.c:232:15-16:
WARNING comparing pointer to 0
Compare pointer-typed values to NULL rather than 0.
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200121013153.9937-1-chenzhou10@huawei.com
Tyrel Datwyler [Mon, 20 Jan 2020 22:10:02 +0000 (14:10 -0800)]
powerpc/pseries/vio: Fix iommu_table use-after-free refcount warning
Commit
e5afdf9dd515 ("powerpc/vfio_spapr_tce: Add reference counting to
iommu_table") missed an iommu_table allocation in the pseries vio code.
The iommu_table is allocated with kzalloc and as a result the associated
kref gets a value of zero. This has the side effect that during a DLPAR
remove of the associated virtual IOA the iommu_tce_table_put() triggers
a use-after-free underflow warning.
Call Trace:
[
c0000002879e39f0] [
c00000000071ecb4] refcount_warn_saturate+0x184/0x190
(unreliable)
[
c0000002879e3a50] [
c0000000000500ac] iommu_tce_table_put+0x9c/0xb0
[
c0000002879e3a70] [
c0000000000f54e4] vio_dev_release+0x34/0x70
[
c0000002879e3aa0] [
c00000000087cfa4] device_release+0x54/0xf0
[
c0000002879e3b10] [
c000000000d64c84] kobject_cleanup+0xa4/0x240
[
c0000002879e3b90] [
c00000000087d358] put_device+0x28/0x40
[
c0000002879e3bb0] [
c0000000007a328c] dlpar_remove_slot+0x15c/0x250
[
c0000002879e3c50] [
c0000000007a348c] remove_slot_store+0xac/0xf0
[
c0000002879e3cd0] [
c000000000d64220] kobj_attr_store+0x30/0x60
[
c0000002879e3cf0] [
c0000000004ff13c] sysfs_kf_write+0x6c/0xa0
[
c0000002879e3d10] [
c0000000004fde4c] kernfs_fop_write+0x18c/0x260
[
c0000002879e3d60] [
c000000000410f3c] __vfs_write+0x3c/0x70
[
c0000002879e3d80] [
c000000000415408] vfs_write+0xc8/0x250
[
c0000002879e3dd0] [
c0000000004157dc] ksys_write+0x7c/0x120
[
c0000002879e3e20] [
c00000000000b278] system_call+0x5c/0x68
Further, since the refcount was always zero the iommu_tce_table_put()
fails to call the iommu_table release function resulting in a leak.
Fix this issue be initilizing the iommu_table kref immediately after
allocation.
Fixes:
e5afdf9dd515 ("powerpc/vfio_spapr_tce: Add reference counting to iommu_table")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1579558202-26052-1-git-send-email-tyreld@linux.ibm.com
Aneesh Kumar K.V [Wed, 8 Jan 2020 06:46:47 +0000 (12:16 +0530)]
powerpc/papr_scm: Don't enable direct map for a region by default
Setting ND_REGION_PAGEMAP flag implies namespace mode defaults to fsdax mode.
This also means kernel ends up creating struct page backing for these namspace
ranges. With large namespaces that is not the right thing to do. We
should let the user select the mode he/she wants the namespace to be created
with.
Hence disable ND_REGION_PAGEMAP for papr_scm regions. We still keep the flag for
of_pmem because it supports only small persistent memory regions.
This is similar to what is done for x86 with commit
commit:
004f1afbe199 ("libnvdimm, pmem: direct map legacy pmem by default")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200108064647.169637-1-aneesh.kumar@linux.ibm.com
Greg Kurz [Fri, 15 Nov 2019 18:10:58 +0000 (19:10 +0100)]
powerpc/xive: Drop extern qualifiers from header function prototypes
As reported by ./scripts/checkpatch.pl --strict:
CHECK: extern prototypes should be avoided in .h files
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/157384145834.181768.944827793193636924.stgit@bahia.lan
Greg Kurz [Wed, 3 Jul 2019 22:03:19 +0000 (00:03 +0200)]
KVM: PPC: Book3S HV: XIVE: Fix typo in comment
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156219139988.578018.1046848908285019838.stgit@bahia.lan
Krzysztof Kozlowski [Wed, 20 Nov 2019 13:41:15 +0000 (21:41 +0800)]
macintosh: Fix Kconfig indentation
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191120134115.14918-1-krzk@kernel.org
Laurentiu Tudor [Tue, 14 Jan 2020 11:00:25 +0000 (11:00 +0000)]
MAINTAINERS: Add myself as maintainer of ehv_bytechan tty driver
Michael Ellerman made a call for volunteers from NXP to maintain
this driver and I offered myself.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200114110012.17351-1-laurentiu.tudor@nxp.com
Oliver O'Halloran [Fri, 10 Jan 2020 07:02:07 +0000 (18:02 +1100)]
powernv/pci: Move pnv_pci_dma_bus_setup() to pci-ioda.c
This is only used in pci-ioda.c so move it there and rename it to match.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200110070207.439-6-oohall@gmail.com
Oliver O'Halloran [Fri, 10 Jan 2020 07:02:06 +0000 (18:02 +1100)]
powernv/pci: Fold pnv_pci_dma_dev_setup() into the pci-ioda.c version
pnv_pci_dma_dev_setup() does nothing but call the phb->dma_dev_setup()
callback, if one exists. That callback is only set for normal PCIe PHBs so
we can remove the layer of indirection and use the ioda version in
the pci_controller_ops.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200110070207.439-5-oohall@gmail.com
Oliver O'Halloran [Fri, 10 Jan 2020 07:02:05 +0000 (18:02 +1100)]
powerpc/iov: Move VF pdev fixup into pcibios_fixup_iov()
An ioda_pe for each VF is allocated in pnv_pci_sriov_enable() before
the pci_dev for the VF is created. We need to set the pe->pdev pointer
at some point after the pci_dev is created. Currently we do that in:
pcibios_bus_add_device()
pnv_pci_dma_dev_setup() (via phb->ops.dma_dev_setup)
/* fixup is done here */
pnv_pci_ioda_dma_dev_setup() (via pnv_phb->dma_dev_setup)
The fixup needs to be done before setting up DMA for for the VF's PE,
but there's no real reason to delay it until this point. Move the
fixup into pnv_pci_ioda_fixup_iov() so the ordering is:
pcibios_add_device()
pnv_pci_ioda_fixup_iov() (via ppc_md.pcibios_fixup_sriov)
pcibios_bus_add_device()
...
This isn't strictly required, but it's a slightly more logical place
to do the fixup and it simplifies pnv_pci_dma_dev_setup().
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200110070207.439-4-oohall@gmail.com
Oliver O'Halloran [Fri, 10 Jan 2020 07:02:04 +0000 (18:02 +1100)]
powernv/pci: Remove dma_dev_setup() for NPU PHBs
The pnv_pci_dma_dev_setup() only does something when:
1) There PHB contains VFs, or
2) The PHB defines a dma_dev_setup() callback in the pnv_phb structure.
Neither is true for NPU PHBs so there's no reason to set the callback.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200110070207.439-3-oohall@gmail.com
Oliver O'Halloran [Fri, 10 Jan 2020 07:02:03 +0000 (18:02 +1100)]
powerpc/pci: Fold pcibios_setup_device() into pcibios_bus_add_device()
pcibios_bus_add_device() is the only caller of pcibios_setup_device().
Fold them together since there's no real reason to keep them separate.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200110070207.439-2-oohall@gmail.com
Oliver O'Halloran [Fri, 1 Nov 2019 08:55:22 +0000 (19:55 +1100)]
powerpc/powernv: Allow manually invoking special reboots
OPAL provides several different kinds of reboot for the kernel to use,
namely forcing a full reboot, platform error reboot and MPIPL. Right now
triggering the alternative resets requires some ad-hoc method such as
triggering a kernel crash and hoping the stars align. It's sometimes handy
to be able to trigger one of these resets directly, so add a way to do
that.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191101085522.3055-2-oohall@gmail.com
Oliver O'Halloran [Fri, 1 Nov 2019 08:55:21 +0000 (19:55 +1100)]
powerpc/xmon: Allow passing an argument to ppc_md.restart()
On PowerNV a few different kinds of reboot are supported. We'd like to be
able to exercise these from xmon so allow 'zr' to take an argument, and
pass that to the ppc_md.restart() function.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191101085522.3055-1-oohall@gmail.com
Oliver O'Halloran [Fri, 1 Nov 2019 06:26:11 +0000 (17:26 +1100)]
powerpc/powernv: Use common code for the symbol_map export
Long before we had a generic way for firmware to export memory ranges of
interest we added a special case for the skiboot symbol map. The code is
pretty much identical to the generic export so re-use the code.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191101062611.32610-2-oohall@gmail.com
Oliver O'Halloran [Fri, 1 Nov 2019 06:26:10 +0000 (17:26 +1100)]
powerpc/powernv: Rework exports to support subnodes
Originally we only had a handful of exported memory ranges, but we'd to
export the per-core trace buffers. This results in a lot of files in the
exports directory which is a but unfortunate. We can clean things up a bit
by turning subnodes into subdirectories of the exports directory.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191101062611.32610-1-oohall@gmail.com
Oliver O'Halloran [Wed, 16 Oct 2019 01:25:36 +0000 (12:25 +1100)]
powerpc/eeh: Only dump stack once if an MMIO loop is detected
Many drivers don't check for errors when they get a 0xFFs response from an
MMIO load. As a result after an EEH event occurs a driver can get stuck in
a polling loop unless it some kind of internal timeout logic.
Currently EEH tries to detect and report stuck drivers by dumping a stack
trace after eeh_dev_check_failure() is called EEH_MAX_FAILS times on an
already frozen PE. The value of EEH_MAX_FAILS was chosen so that a dump
would occur every few seconds if the driver was spinning in a loop. This
results in a lot of spurious stack traces in the kernel log.
Fix this by limiting it to printing one stack trace for each PE freeze. If
the driver is truely stuck the kernel's hung task detector is better suited
to reporting the probelm anyway.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Tested-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191016012536.22588-1-oohall@gmail.com
Oliver O'Halloran [Thu, 12 Sep 2019 05:29:45 +0000 (15:29 +1000)]
powernv/pci: Add a debugfs entry to dump PHB's IODA PE state
Add a debugfs entry to dump the state of the active IODA PEs. The IODA
PE state reflects how the PHB's internal concept of a PE is
configured. This is separate to the EEH PE state and is managed power
the PowerNV PCI backend rather than the EEH core.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[mpe: Use DEFINE_DEBUGFS_ATTRIBUTE]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190912052945.12589-3-oohall@gmail.com
Oliver O'Halloran [Thu, 12 Sep 2019 05:29:44 +0000 (15:29 +1000)]
powernv/pci: Allow any write trigger the diag dump
Make the dump trigger off any input rather than just '1'. This allows you
to write "echo 1> dump_diag_data" and it'll do what you want rather than
erroring out pointlessly.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190912052945.12589-2-oohall@gmail.com
Oliver O'Halloran [Thu, 12 Sep 2019 05:29:43 +0000 (15:29 +1000)]
powernv/pci: Use pnv_phb as the private data for debugfs entries
Use the pnv_phb structure as the private data pointer for the debugfs
files. This lets us delete some code and an open-coded use of
hose->private_data.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190912052945.12589-1-oohall@gmail.com
Oliver O'Halloran [Wed, 21 Aug 2019 06:26:55 +0000 (16:26 +1000)]
powerpc/pcidn: Warn when sriov pci_dn management is used incorrectly
These functions can only be used on a SR-IOV capable physical function and
they're only called in pcibios_sriov_enable / disable. Make them emit a
warning in the future if they're used incorrectly and remove the dead
code that checks if the device is a VF.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190821062655.19735-3-oohall@gmail.com
Oliver O'Halloran [Wed, 21 Aug 2019 06:26:54 +0000 (16:26 +1000)]
powerpc/pcidn: Make VF pci_dn management CONFIG_PCI_IOV specific
The powerpc PCI code requires that a pci_dn structure exists for all
devices in the system. This is fine for real devices since at boot a pci_dn
is created for each PCI device in the DT and it's fine for hotplugged devices
since the hotplug slot driver will manage the pci_dn's devices in hotplug
slots. For SR-IOV, we need the platform / pcibios to manage the pci_dn for
virtual functions since firmware is unaware of VFs, and they aren't
"hot plugged" in the traditional sense.
Management of the pci_dn is handled by the, poorly named, functions:
add_pci_dev_data() and remove_pci_dev_data(). The entire body of these
functions is #ifdef`ed around CONFIG_PCI_IOV and they cannot be used
in any other context, so make them only available when CONFIG_PCI_IOV
is selected, and rename them to reflect their actual usage rather than
having them masquerade as generic code.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190821062655.19735-2-oohall@gmail.com
Oliver O'Halloran [Wed, 21 Aug 2019 06:26:53 +0000 (16:26 +1000)]
powerpc/sriov: Remove VF eeh_dev state when disabling SR-IOV
When disabling virtual functions on an SR-IOV adapter we currently do not
correctly remove the EEH state for the now-dead virtual functions. When
removing the pci_dn that was created for the VF when SR-IOV was enabled
we free the corresponding eeh_dev without removing it from the child device
list of the eeh_pe that contained it. This can result in crashes due to the
use-after-free.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Tested-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190821062655.19735-1-oohall@gmail.com
Oliver O'Halloran [Mon, 15 Jul 2019 08:56:12 +0000 (18:56 +1000)]
powerpc/eeh_sysfs: Make clearing EEH_DEV_SYSFS saner
The eeh_sysfs_remove_device() function is supposed to clear the
EEH_DEV_SYSFS flag since it indicates the EEH sysfs entries have been added
for a pci_dev.
When the sysfs files are removed eeh_remove_device() the eeh_dev and the
pci_dev have already been de-associated. This then causes the
pci_dev_to_eeh_dev() call in eeh_sysfs_remove_device() to return NULL so
the flag can't be cleared from the still-live eeh_dev. This problem is
worked around in the caller by clearing the flag manually. However, this
behaviour doesn't make a whole lot of sense, so this patch fixes it by:
a) Re-ordering eeh_remove_device() so that eeh_sysfs_remove_device() is
called before de-associating the pci_dev and eeh_dev.
b) Making eeh_sysfs_remove_device() emit a warning if there's no
corresponding eeh_dev for a pci_dev. The paths where the sysfs
files are only reachable if EEH was setup for the device
for the device in the first place so hitting this warning
indicates a programming error.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Tested-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190715085612.8802-6-oohall@gmail.com
Oliver O'Halloran [Mon, 15 Jul 2019 08:56:11 +0000 (18:56 +1000)]
powerpc/eeh_sysfs: Remove double pci_dn lookup.
In eeh_notify_resume_show() the pci_dn for the device is looked up once in
the declaration block and then once after checking for a NULL eeh_dev.
Remove the second lookup since it's pointless.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Tested-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190715085612.8802-5-oohall@gmail.com
Oliver O'Halloran [Mon, 15 Jul 2019 08:56:10 +0000 (18:56 +1000)]
powerpc/eeh_sysfs: ifdef pseries sr-iov sysfs properties
There are several EEH sysfs properties that only exists when the
"ibm,is-open-sriov-pf" property appears in the device tree node of the PCI
device. This used on pseries to indicate to the guest that the hypervisor
allows the guest to configure the SR-IOV capability. Doing this requires
some handshaking between the guest, hypervisor and userspace when a VF is
EEH frozen which is why these properties exist.
This is all dead code on non-pseries platforms so wrap it in an #ifdef
CONFIG_PPC_PSERIES to make the dependency clearer.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Tested-by: Sam Bobroff <sbobroff@linux.ibm.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190715085612.8802-4-oohall@gmail.com
Oliver O'Halloran [Mon, 15 Jul 2019 08:56:09 +0000 (18:56 +1000)]
powerpc/eeh_sysfs: Fix incorrect comment
The EEH_ATTR_SHOW() helper is used to display fields from struct eeh_dev
not struct pci_dn.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190715085612.8802-3-oohall@gmail.com
Oliver O'Halloran [Mon, 15 Jul 2019 08:56:08 +0000 (18:56 +1000)]
powerpc/eeh_cache: Don't use pci_dn when inserting new ranges
At the point where we start inserting ranges into the EEH address cache the
binding between pci_dev and eeh_dev has already been set up. Instead of
consulting the pci_dn tree we can retrieve the eeh_dev directly using
pci_dev_to_eeh_dev().
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Tested-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190715085612.8802-2-oohall@gmail.com
Frederic Barrat [Thu, 21 Nov 2019 13:49:18 +0000 (14:49 +0100)]
ocxl: Add PCI hotplug dependency to Kconfig
The PCI hotplug framework is used to update the devices when a new
image is written to the FPGA.
Reviewed-by: Alastair D'Silva <alastair@d-silva.org>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191121134918.7155-12-fbarrat@linux.ibm.com
Frederic Barrat [Thu, 21 Nov 2019 13:49:17 +0000 (14:49 +0100)]
pci/hotplug/pnv-php: Wrap warnings in macro
An opencapi slot doesn't have an associated bridge device. It's not
needed for operation, but any warning is displayed through pci_warn()
which uses the pci_dev struct of the assocated bridge device. So wrap
those warning so that a different trace mechanism can be used if it's
an opencapi slot.
Reviewed-by: Alastair D'Silva <alastair@d-silva.org>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191121134918.7155-11-fbarrat@linux.ibm.com
Frederic Barrat [Thu, 21 Nov 2019 13:49:16 +0000 (14:49 +0100)]
pci/hotplug/pnv-php: Relax check when disabling slot
The driver only allows to disable a slot in the POPULATED
state. However, if an error occurs while enabling the slot, say
because the link couldn't be trained, then the POPULATED state may not
be reached, yet the power state of the slot is on. So allow to disable
a slot in the REGISTERED state. Removing the devices will do nothing
since it's not populated, and we'll set the power state of the slot
back to off.
Reviewed-by: Alastair D'Silva <alastair@d-silva.org>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191121134918.7155-10-fbarrat@linux.ibm.com
Frederic Barrat [Thu, 21 Nov 2019 13:49:15 +0000 (14:49 +0100)]
pci/hotplug/pnv-php: Register opencapi slots
Add the opencapi PHBs to the list of PHBs being scanned to look for
slots.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191121134918.7155-9-fbarrat@linux.ibm.com
Frederic Barrat [Thu, 21 Nov 2019 13:49:14 +0000 (14:49 +0100)]
pci/hotplug/pnv-php: Improve error msg on power state change failure
When changing the slot state, if opal hits an error and tells as such
in the asynchronous reply, the warning "Wrong msg" is logged, which is
rather confusing. Instead we can reuse the better message which is
already used when we couldn't submit the asynchronous opal request
initially.
Reviewed-by: Alastair D'Silva <alastair@d-silva.org>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191121134918.7155-8-fbarrat@linux.ibm.com
Frederic Barrat [Thu, 21 Nov 2019 13:49:13 +0000 (14:49 +0100)]
pci/hotplug/pnv-php: Remove erroneous warning
On powernv, when removing a device through hotplug, the following
warning is logged:
Invalid refcount <.> on <...>
It may be incorrect, the refcount may be set to a higher value than 1
and be valid. of_detach_node() can drop more than one reference. As it
doesn't seem trivial to assert the correct value, let's remove the
warning.
Reviewed-by: Alastair D'Silva <alastair@d-silva.org>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191121134918.7155-7-fbarrat@linux.ibm.com
Frederic Barrat [Thu, 21 Nov 2019 13:49:12 +0000 (14:49 +0100)]
powerpc/powernv/ioda: Find opencapi slot for a device node
Unlike real PCI slots, opencapi slots are directly associated to
the (virtual) opencapi PHB, there's no intermediate bridge. So when
looking for a slot ID, we must start the search from the device node
itself and not its parent.
Also, the slot ID is not attached to a specific bdfn, so let's build
it from the PHB ID, like skiboot.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191121134918.7155-6-fbarrat@linux.ibm.com
Frederic Barrat [Thu, 21 Nov 2019 13:49:11 +0000 (14:49 +0100)]
powerpc/powernv/ioda: Release opencapi device
With hotplug, an opencapi device can now go away. It needs to be
released, mostly to clean up its PE state. We were previously not
defining any device callback. We can reuse the standard PCI release
callback, it does a bit too much for an opencapi device, but it's
harmless, and only needs minor tuning.
Also separate the undo of the PELT-V code in a separate function, it
is not needed for NPU devices and it improves a bit the readability of
the code.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191121134918.7155-5-fbarrat@linux.ibm.com
Frederic Barrat [Thu, 21 Nov 2019 13:49:10 +0000 (14:49 +0100)]
powerpc/powernv/ioda: set up PE on opencapi device when enabling
The PE for an opencapi device was set as part of a late PHB fixup
operation, when creating the PHB. To use the PCI hotplug framework,
this is not going to work, as the PHB stays the same, it's only the
devices underneath which are updated. For regular PCI devices, it is
done as part of the reconfiguration of the bridge, but for opencapi
PHBs, we don't have an intermediate bridge. So let's define the PE
when the device is enabled. PEs are meaningless for opencapi, the NPU
doesn't define them and opal is not doing anything with them.
Reviewed-by: Alastair D'Silva <alastair@d-silva.org>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191121134918.7155-4-fbarrat@linux.ibm.com
Frederic Barrat [Thu, 21 Nov 2019 13:49:09 +0000 (14:49 +0100)]
powerpc/powernv/ioda: Protect PE list
Protect the PHB's list of PE. Probably not needed as long as it was
populated during PHB creation, but it feels right and will become
required once we can add/remove opencapi devices on hotplug.
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191121134918.7155-3-fbarrat@linux.ibm.com
Frederic Barrat [Thu, 21 Nov 2019 13:49:08 +0000 (14:49 +0100)]
powerpc/powernv/ioda: Fix ref count for devices with their own PE
The pci_dn structure used to store a pointer to the struct pci_dev, so
taking a reference on the device was required. However, the pci_dev
pointer was later removed from the pci_dn structure, but the reference
was kept for the npu device.
See commit
902bdc57451c ("powerpc/powernv/idoa: Remove unnecessary
pcidev from pci_dn").
We don't need to take a reference on the device when assigning the PE
as the struct pnv_ioda_pe is cleaned up at the same time as
the (physical) device is released. Doing so prevents the device from
being released, which is a problem for opencapi devices, since we want
to be able to remove them through PCI hotplug.
Now the ugly part: nvlink npu devices are not meant to be
released. Because of the above, we've always leaked a reference and
simply removing it now is dangerous and would likely require more
work. There's currently no release device callback for nvlink devices
for example. So to be safe, this patch leaks a reference on the npu
device, but only for nvlink and not opencapi.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191121134918.7155-2-fbarrat@linux.ibm.com
Christophe Leroy [Mon, 2 Dec 2019 07:57:35 +0000 (07:57 +0000)]
powerpc/vdso32: miscellaneous optimisations
Various optimisations by inverting branches and removing
redundant instructions.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b4e79f963845545bcce1459cd6fcfe46bdde7863.1575273217.git.christophe.leroy@c-s.fr
Christophe Leroy [Mon, 2 Dec 2019 07:57:33 +0000 (07:57 +0000)]
powerpc/vdso32: implement clock_getres entirely
clock_getres returns hrtimer_res for all clocks but coarse ones
for which it returns KTIME_LOW_RES.
return EINVAL for unknown clocks.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/37f94e47c91070b7606fb3ec3fe6fd2302a475a0.1575273217.git.christophe.leroy@c-s.fr
Christophe Leroy [Mon, 2 Dec 2019 07:57:32 +0000 (07:57 +0000)]
powerpc/vdso32: use LOAD_REG_IMMEDIATE()
Use LOAD_REG_IMMEDIATE() to load registers with immediate value.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/36f111437e66e601929308f5d5dce230e1ce472f.1575273217.git.christophe.leroy@c-s.fr
Christophe Leroy [Mon, 2 Dec 2019 07:57:31 +0000 (07:57 +0000)]
powerpc/vdso32: Don't read cache line size from the datapage on PPC32.
On PPC32, the cache lines have a fixed size known at build time.
Don't read it from the datapage.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/dfa7b35e27e01964fcda84bf1ed8b2b31cf93826.1575273217.git.christophe.leroy@c-s.fr
Christophe Leroy [Mon, 2 Dec 2019 07:57:30 +0000 (07:57 +0000)]
powerpc/vdso32: inline __get_datapage()
__get_datapage() is only a few instructions to retrieve the
address of the page where the kernel stores data to the VDSO.
By inlining this function into its users, a bl/blr pair and
a mflr/mtlr pair is avoided, plus a few reg moves.
The improvement is noticeable (about 55 nsec/call on an 8xx)
vdsotest before the patch:
gettimeofday: vdso: 731 nsec/call
clock-gettime-realtime-coarse: vdso: 668 nsec/call
clock-gettime-monotonic-coarse: vdso: 745 nsec/call
vdsotest after the patch:
gettimeofday: vdso: 677 nsec/call
clock-gettime-realtime-coarse: vdso: 613 nsec/call
clock-gettime-monotonic-coarse: vdso: 690 nsec/call
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c39ef7f3dfa25356b01e211d539671f279086c09.1575273217.git.christophe.leroy@c-s.fr
Christophe Leroy [Mon, 2 Dec 2019 07:57:28 +0000 (07:57 +0000)]
powerpc/vdso32: Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE
This is copied and adapted from commit
5c929885f1bb ("powerpc/vdso64:
Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE")
from Santosh Sivaraj <santosh@fossix.org>
Benchmark from vdsotest-all:
clock-gettime-realtime: syscall: 3601 nsec/call
clock-gettime-realtime: libc: 1072 nsec/call
clock-gettime-realtime: vdso: 931 nsec/call
clock-gettime-monotonic: syscall: 4034 nsec/call
clock-gettime-monotonic: libc: 1213 nsec/call
clock-gettime-monotonic: vdso: 1076 nsec/call
clock-gettime-realtime-coarse: syscall: 2722 nsec/call
clock-gettime-realtime-coarse: libc: 805 nsec/call
clock-gettime-realtime-coarse: vdso: 668 nsec/call
clock-gettime-monotonic-coarse: syscall: 2949 nsec/call
clock-gettime-monotonic-coarse: libc: 882 nsec/call
clock-gettime-monotonic-coarse: vdso: 745 nsec/call
Additional test passed with:
vdsotest -d 30 clock-gettime-monotonic-coarse verify
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/linuxppc/issues/issues/41
Link: https://lore.kernel.org/r/d1d24a376e396540194eeb85a2efe481e92ade24.1575273217.git.christophe.leroy@c-s.fr
Christophe Leroy [Mon, 2 Dec 2019 07:57:27 +0000 (07:57 +0000)]
powerpc/32: Add VDSO version of getcpu on non SMP
Commit
18ad51dd342a ("powerpc: Add VDSO version of getcpu") added
getcpu() for PPC64 only, by making use of a user readable general
purpose SPR.
PPC32 doesn't have any such SPR.
For non SMP, just return CPU id 0 from the VDSO directly.
PPC32 doesn't support CONFIG_NUMA so NUMA node is always 0.
Before the patch, vdsotest reported:
getcpu: syscall: 1572 nsec/call
getcpu: libc: 1787 nsec/call
getcpu: vdso: not tested
Now, vdsotest reports:
getcpu: syscall: 1582 nsec/call
getcpu: libc: 502 nsec/call
getcpu: vdso: 187 nsec/call
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eaac4b6494ecff1811220fccc895bf282aab884a.1575273217.git.christophe.leroy@c-s.fr
Christophe Leroy [Thu, 28 Nov 2019 12:16:35 +0000 (12:16 +0000)]
powerpc/devicetrees: Change 'gpios' to 'cs-gpios' on fsl, spi nodes
Since commit
0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO
descriptors"), the prefered way to define chipselect GPIOs is using
'cs-gpios' property instead of the legacy 'gpios' property.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7556683b57d8ce100855857f03d1cd3d2903d045.1574943062.git.christophe.leroy@c-s.fr
Christophe Leroy [Tue, 26 Nov 2019 17:43:30 +0000 (17:43 +0000)]
selftests/powerpc: Enable range tests on 8xx in ptrace-hwbreak.c selftest
8xx is now able to support any range length so range tests can be
enabled.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/081e3b4e3a17a8ec9fdac46b505e3a29ca15f209.1574790198.git.christophe.leroy@c-s.fr
Christophe Leroy [Tue, 26 Nov 2019 17:43:29 +0000 (17:43 +0000)]
powerpc/hw_breakpoints: Rewrite 8xx breakpoints to allow any address range size.
Unlike standard powerpc, Powerpc 8xx doesn't have SPRN_DABR, but
it has a breakpoint support based on a set of comparators which
allow more flexibility.
Commit
4ad8622dc548 ("powerpc/8xx: Implement hw_breakpoint")
implemented breakpoints by emulating the DABR behaviour. It did
this by setting one comparator the match 4 bytes at breakpoint address
and the other comparator to match 4 bytes at breakpoint address + 4.
Rewrite 8xx hw_breakpoint to make breakpoints match all addresses
defined by the breakpoint address and length by making full use of
comparators.
Now, comparator E is set to match any address greater than breakpoint
address minus one. Comparator F is set to match any address lower than
breakpoint address plus breakpoint length. Addresses are aligned
to 32 bits.
When the breakpoint range starts at address 0, the breakpoint is set
to match comparator F only. When the breakpoint range end at address
0xffffffff, the breakpoint is set to match comparator E only.
Otherwise the breakpoint is set to match comparator E and F.
At the same time, use registers bit names instead of hardcoded values.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/05105deeaf63bc02151aea2cdeaf525534e0e9d4.1574790198.git.christophe.leroy@c-s.fr
Christophe Leroy [Tue, 26 Nov 2019 13:16:50 +0000 (13:16 +0000)]
powerpc/8xx: Fix permanently mapped IMMR region.
When not using large TLBs, the IMMR region is still
mapped as a whole block in the FIXMAP area.
Properly report that the IMMR region is block-mapped even
when not using large TLBs.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/45f4f414bcd7198b0755cf4287ff216fbfc24b9d.1574774187.git.christophe.leroy@c-s.fr
Christophe Leroy [Tue, 14 Jan 2020 08:13:10 +0000 (08:13 +0000)]
powerpc/ptdump: Only enable PPC_CHECK_WX with STRICT_KERNEL_RWX
ptdump_check_wx() is called from mark_rodata_ro() which only exists
when CONFIG_STRICT_KERNEL_RWX is selected.
Fixes:
453d87f6a8ae ("powerpc/mm: Warn if W+X pages found on boot")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/922d4939c735c6b52b4137838bcc066fffd4fc33.1578989545.git.christophe.leroy@c-s.fr
Christophe Leroy [Tue, 14 Jan 2020 08:13:09 +0000 (08:13 +0000)]
powerpc/ptdump: Fix W+X verification
Verification cannot rely on simple bit checking because on some
platforms PAGE_RW is 0, checking that a page is not W means
checking that PAGE_RO is set instead of checking that PAGE_RW
is not set.
Use pte helpers instead of checking bits.
Fixes:
453d87f6a8ae ("powerpc/mm: Warn if W+X pages found on boot")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0d894839fdbb19070f0e1e4140363be4f2bb62fc.1578989540.git.christophe.leroy@c-s.fr
Christophe Leroy [Tue, 14 Jan 2020 08:13:08 +0000 (08:13 +0000)]
powerpc/ptdump: Fix W+X verification call in mark_rodata_ro()
ptdump_check_wx() also have to be called when pages are mapped
by blocks.
Fixes:
453d87f6a8ae ("powerpc/mm: Warn if W+X pages found on boot")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/37517da8310f4457f28921a4edb88fb21d27b62a.1578989531.git.christophe.leroy@c-s.fr
Christophe Leroy [Tue, 14 Jan 2020 07:14:40 +0000 (07:14 +0000)]
powerpc/ptdump: don't entirely rebuild kernel when selecting CONFIG_PPC_DEBUG_WX
Selecting CONFIG_PPC_DEBUG_WX only impacts ptdump and pgtable_32/64
init calls. Declaring related functions in asm/pgtable.h implies
rebuilding almost everything.
Move ptdump_check_wx() declaration in mm/mmu_decl.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bf34fd9dca61eadf9a134a9f89ebbc162cfd5f86.1578986011.git.christophe.leroy@c-s.fr
Nicholas Piggin [Thu, 11 Jul 2019 02:24:03 +0000 (12:24 +1000)]
powerpc/64s: Reimplement power4_idle code in C
This implements the tricky tracing and soft irq handling bits in C,
leaving the low level bit to asm.
A functional difference is that this redirects the interrupt exit to
a return stub to execute blr, rather than the lr address itself. This
is probably barely measurable on real hardware, but it keeps the link
stack balanced.
Tested with QEMU.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Move power4_fixup_nap back into exceptions-64s.S]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190711022404.18132-1-npiggin@gmail.com
Julia Lawall [Sun, 29 Dec 2019 15:42:55 +0000 (16:42 +0100)]
misc: cxl: use mmgrab
Mmgrab was introduced in commit
f1f1007644ff ("mm: add new mmgrab()
helper") and most of the kernel was updated to use it. Update a
remaining file.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
<smpl>
@@ expression e; @@
- atomic_inc(&e->mm_count);
+ mmgrab(e);
</smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1577634178-22530-2-git-send-email-Julia.Lawall@inria.fr
Russell Currey [Tue, 24 Dec 2019 06:41:26 +0000 (17:41 +1100)]
powerpc: Remove STRICT_KERNEL_RWX incompatibility with RELOCATABLE
I have tested this with the Radix MMU and everything seems to work, and
the previous patch for Hash seems to fix everything too.
STRICT_KERNEL_RWX should still be disabled by default for now.
Please test STRICT_KERNEL_RWX + RELOCATABLE!
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191224064126.183670-2-ruscur@russell.cc
Russell Currey [Tue, 24 Dec 2019 06:41:25 +0000 (17:41 +1100)]
powerpc/book3s64/hash: Disable 16M linear mapping size if not aligned
With STRICT_KERNEL_RWX on in a relocatable kernel under the hash MMU,
if the position the kernel is loaded at is not 16M aligned things go
horribly wrong. Specifically hash__mark_initmem_nx() will call
hash__change_memory_range() which then aligns down the start address,
and due to the text not being 16M aligned causes some of the kernel
text to be marked non-executable.
We can avoid this when selecting the linear mapping size, so do so and
print a warning. I tested this for various alignments and as long as
the position is 64K aligned it's fine (the base requirement for
powerpc).
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Add details of the failure mode]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191224064126.183670-1-ruscur@russell.cc
Pingfan Liu [Fri, 10 Jan 2020 04:54:02 +0000 (12:54 +0800)]
powerpc/pseries: Advance pfn if section is not present in lmb_is_removable()
In lmb_is_removable(), if a section is not present, it should continue
to test the rest of the sections in the block. But the current code
fails to do so.
Fixes:
51925fb3c5c9 ("powerpc/pseries: Implement memory hotplug remove in the kernel")
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1578632042-12415-1-git-send-email-kernelfans@gmail.com
Sukadev Bhattiprolu [Mon, 6 Jan 2020 19:50:02 +0000 (13:50 -0600)]
powerpc/xmon: don't access ASDR in VMs
ASDR is HV-privileged and must only be accessed in HV-mode.
Fixes a Program Check (0x700) when xmon in a VM dumps SPRs.
Fixes:
d1e1b351f50f ("powerpc/xmon: Add ISA v3.0 SPRs to SPR dump")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200107021633.GB29843@us.ibm.com
Bai Yingjie [Mon, 6 Jan 2020 04:29:54 +0000 (12:29 +0800)]
powerpc/mpc85xx: also write addr_h to spin table for 64bit boot entry
CPU like P4080 has 36bit physical address, its DDR physical
start address can be configured above 4G by LAW registers.
For such systems in which their physical memory start address was
configured higher than 4G, we need also to write addr_h into the spin
table of the target secondary CPU, so that addr_h and addr_l together
represent a 64bit physical address.
Otherwise the secondary core can not get correct entry to start from.
Signed-off-by: Bai Yingjie <byj.tea@gmail.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200106042957.26494-2-yingjie_bai@126.com
Bai Yingjie [Mon, 6 Jan 2020 04:29:53 +0000 (12:29 +0800)]
powerpc32/booke: consistently return phys_addr_t in __pa()
When CONFIG_RELOCATABLE=y is set, VIRT_PHYS_OFFSET is a 64bit variable,
thus __pa() returns as 64bit value.
But when CONFIG_RELOCATABLE=n, __pa() returns 32bit value.
When CONFIG_PHYS_64BIT is set, __pa() should consistently return as
64bit value irrelevant to CONFIG_RELOCATABLE.
So we'd make __pa() consistently return phys_addr_t, which is 64bit
when CONFIG_PHYS_64BIT is set.
Signed-off-by: Bai Yingjie <byj.tea@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200106042957.26494-1-yingjie_bai@126.com
OSDN Git Service
