OSDN Git Service
Juan Quintela [Fri, 1 Feb 2013 11:41:38 +0000 (12:41 +0100)]
migration: don't account sleep time for calculating bandwidth
While we are sleeping we are not sending, so we should not use that
time to estimate our bandwidth.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Juan Quintela [Fri, 1 Feb 2013 11:39:08 +0000 (12:39 +0100)]
migration: calculate end time after we have sent the data
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Juan Quintela [Fri, 1 Feb 2013 10:12:26 +0000 (11:12 +0100)]
migration: change initial value of expected_downtime
0 is a very bad initial value, what we are trying to get is
max_downtime, so that is a much better estimation.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Anthony Liguori [Wed, 20 Feb 2013 13:43:26 +0000 (07:43 -0600)]
gtk: suppress accelerators from the File menu when grab is active
If you're full screen, you probably expect Ctrl-Q to go to the guest,
not the host. I think restricting certain menus is the right way to
handle this generally speaking.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1361367806-4599-10-git-send-email-aliguori@us.ibm.com
Anthony Liguori [Wed, 20 Feb 2013 13:43:25 +0000 (07:43 -0600)]
gtk: make default UI (v5)
A user can still enable SDL with '-sdl' or '-display sdl' but start making the
default display GTK by default.
I'd also like to deprecate the SDL display and remove it in a few releases.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1361367806-4599-9-git-send-email-aliguori@us.ibm.com
Anthony Liguori [Wed, 20 Feb 2013 13:43:24 +0000 (07:43 -0600)]
gtk: add translation support (v5)
This includes a de_DE translation from Kevin Wolf and an it translation from
Paolo Bonzini.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1361367806-4599-8-git-send-email-aliguori@us.ibm.com
Anthony Liguori [Wed, 20 Feb 2013 13:43:23 +0000 (07:43 -0600)]
gtk: add support for screen scaling and full screen (v5)
Basic menu items to enter full screen mode and zoom in/out. Unlike SDL, we
don't allow arbitrary scaling based on window resizing. The current behavior
with SDL causes a lot of problems for me.
Sometimes I accidentally resize the window a tiny bit while trying to move it
(Ubuntu's 1-pixel window decorations don't help here). After that, scaling is
now active and if the screen changes size again, badness ensues since the
aspect ratio is skewed.
Allowing zooming by 25% in and out should cover most use cases. We can add a
more flexible scaling later but for now, I think this is a more friendly
behavior.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1361367806-4599-7-git-send-email-aliguori@us.ibm.com
Anthony Liguori [Wed, 20 Feb 2013 13:43:22 +0000 (07:43 -0600)]
gtk: add support for input grabbing (v2)
There is a small deviation from SDL's behavior here. Instead of Ctrl+Alt
triggering grab, we now use Ctrl-Alt-g to trigger grab.
GTK will not accept Ctrl+Alt as an accelerator since it just consists of
modifiers. Having grab as a proper accelerator is important as it allows a user
to override the accelerator for accessibility purposes.
We also are not automatically grabbing on left-click. Besides the inability to
tie mouse clicks to an accelerator, I think this behavior is hard to discover
and since it only happens depending on the guest state, it can lead to confusing
behavior.
This can be changed in the future if there's a strong resistence to dropping
left-click-to-grab, but I think we're better off dropping it.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1361367806-4599-6-git-send-email-aliguori@us.ibm.com
Anthony Liguori [Wed, 20 Feb 2013 13:43:21 +0000 (07:43 -0600)]
gtk: add virtual console support (v2)
This enables VteTerminal to be used to render the text consoles. VteTerminal is
the same widget used by gnome-terminal which means it's VT100 emulation is as
good as they come.
It's also screen reader accessible, supports copy/paste, proper scrolling and
most of the other features you would expect from a terminal widget.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1361367806-4599-5-git-send-email-aliguori@us.ibm.com
Anthony Liguori [Wed, 20 Feb 2013 13:43:20 +0000 (07:43 -0600)]
ui: add basic GTK gui (v5)
This is minimalistic and just contains the basic widget infrastructure. The GUI
consists of a menu and a GtkNotebook. To start with, the notebook has its tabs
hidden which provides a UI that looks very similar to SDL with the exception of
the menu bar.
The menu bar allows a user to toggle the visibility of the tabs. Cairo is used
for rendering.
I used gtk-vnc as a reference. gtk-vnc solves the same basic problems as QEMU
since it was originally written as a remote display for QEMU. So for the most
part, the approach to rendering and keyboard handling should be pretty solid for
GTK.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1361367806-4599-4-git-send-email-aliguori@us.ibm.com
Anthony Liguori [Wed, 20 Feb 2013 13:43:19 +0000 (07:43 -0600)]
console: allow VCs to be overridden by UI
We want to expose VCs using a VteTerminal widget. We need access to provide our
own CharDriverState in order to do this.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1361367806-4599-3-git-send-email-aliguori@us.ibm.com
Anthony Liguori [Wed, 20 Feb 2013 13:43:18 +0000 (07:43 -0600)]
build: disable Wstrict-prototypes
GTK won't build with strict-prototypes due to gtkitemfactory.h:
/* We use () here to mean unspecified arguments. This is deprecated
* as of C99, but we can't change it without breaking compatibility.
* (Note that if we are included from a C++ program () will mean
* (void) so an explicit cast will be needed.)
*/
typedef void (*GtkItemFactoryCallback) ();
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1361367806-4599-2-git-send-email-aliguori@us.ibm.com
Peter Crosthwaite [Tue, 19 Feb 2013 04:02:10 +0000 (14:02 +1000)]
qom/object.c: Allow itf cast with num_itfs = 0
num_interfaces only tells you how many interfaces the concrete child class has
(as defined in the TypeInfo). This means if you have a child class which defines
no interfaces of its own, but its parent has interfaces you cannot cast to those
parent interfaces.
Fixed changing the guard to check the class->interfaces list instead (which is
a complete flattened list of implemented interfaces).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id:
a8c2db3b9b1f3c4bb81aca352b69e33260f36545.
1361246206.git.peter.crosthwaite@xilinx.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Crosthwaite [Tue, 19 Feb 2013 04:02:09 +0000 (14:02 +1000)]
qom/object.c: Reset interface list on inheritance
The QOM framework will attempt the recreate a classes interface list from
scratch for each class. This means that a child class should zero out the
list of interfaces when cloned from the parent class.
Currently the list is memcpy()d from the parent to the child. As the interface
list is just a pointer to a list, this means the parent and child will share
the same list of interfaces. When the child inits, it will append its own
interfaces to the parents list. This is incorrect as the parent should not pick
up its childs interfaces.
This actually causes an infinite loop at class init time, as the child will
iterate through the parent interface list adding each itf to its own list(in
type_initialize()). As the list is (erroneously) shared, the new interface
instances for the child are appended to the parent, and the iterator never hits
the tail and loops forever.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
1f58d2b629d82865dbb2fd5ba8445854049c4382.
1361246206.git.peter.crosthwaite@xilinx.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Wed, 20 Feb 2013 08:37:12 +0000 (09:37 +0100)]
vga: fix byteswapping.
In case host and guest endianness differ the vga code first creates
a shared surface (using qemu_create_displaysurface_from), then goes
patch the surface format to indicate that the bytes must be swapped.
The switch to pixman broke that hack as the format patching isn't
propagated into the pixman image, so ui code using the pixman image
directly (such as vnc) uses the wrong format.
Fix that by adding a byteswap parameter to
qemu_create_displaysurface_from, so we'll use the correct format
when creating the surface (and the pixman image) and don't have
to patch the format afterwards.
[ v2: unbreak xen build ]
Cc: qemu-stable@nongnu.org
Cc: mark.cave-ayland@ilande.co.uk
Cc: agraf@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id:
1361349432-23884-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Wed, 20 Feb 2013 16:24:22 +0000 (16:24 +0000)]
Remove elderly top level TODO file
The top level TODO file hasn't been touched since 2008, so it's now
an unhelpful and out of date mix of things that have already been done,
things that don't make sense any more and things which could in theory
be done but are not in practice important enough (or we'd have done
them some time in the last five years). Remove it. The bug tracking
system is probably a better place to track TODO items if we want to
do so.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1361377462-19816-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jason Wang [Wed, 20 Feb 2013 10:04:01 +0000 (18:04 +0800)]
help: add docs for multiqueue tap options
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id:
1361354641-51969-1-git-send-email-jasowang@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Hajnoczi [Wed, 20 Feb 2013 10:28:33 +0000 (11:28 +0100)]
aio: support G_IO_HUP and G_IO_ERR
aio-posix.c could not take advantage of G_IO_HUP and G_IO_ERR because
select(2) does not have equivalent events. Now that g_poll(3) is used
we can support G_IO_HUP and G_IO_ERR.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id:
1361356113-11049-11-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Hajnoczi [Wed, 20 Feb 2013 10:28:32 +0000 (11:28 +0100)]
aio: convert aio_poll() to g_poll(3)
AioHandler already has a GPollFD so we can directly use its
events/revents.
Add the int pollfds_idx field to AioContext so we can map g_poll(3)
results back to AioHandlers.
Reuse aio_dispatch() to invoke handlers after g_poll(3).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id:
1361356113-11049-10-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Hajnoczi [Wed, 20 Feb 2013 10:28:31 +0000 (11:28 +0100)]
aio: extract aio_dispatch() from aio_poll()
We will need to loop over AioHandlers calling ->io_read()/->io_write()
when aio_poll() is converted from select(2) to g_poll(2).
Luckily the code for this already exists, extract it into the new
aio_dispatch() function.
Two small changes:
* aio_poll() checks !node->deleted to avoid calling handlers that have
been deleted.
* Fix typo 'then' -> 'them' in aio_poll() comment.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id:
1361356113-11049-9-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Hajnoczi [Wed, 20 Feb 2013 10:28:30 +0000 (11:28 +0100)]
main-loop: drop rfds/wfds/xfds for good
Now that all *_fill() and *_poll() functions use GPollFD we no longer
need rfds/wfds/xfds or pollfds_from_select()/pollfds_to_select().
>From now on everything uses GPollFD.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id:
1361356113-11049-8-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Hajnoczi [Wed, 20 Feb 2013 10:28:29 +0000 (11:28 +0100)]
iohandler: switch to GPollFD
Convert iohandler_select_fill() and iohandler_select_poll() to use
GPollFD instead of rfds/wfds/xfds.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id:
1361356113-11049-7-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Hajnoczi [Wed, 20 Feb 2013 10:28:28 +0000 (11:28 +0100)]
slirp: switch to GPollFD
Slirp uses rfds/wfds/xfds more extensively than other QEMU components.
The rarely-used out-of-band TCP data feature is used. That means we
need the full table of select(2) to g_poll(3) events:
rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR
wfds -> G_IO_OUT | G_IO_ERR
xfds -> G_IO_PRI
I came up with this table by looking at Linux fs/select.c which maps
select(2) to poll(2) internally.
Another detail to watch out for are the global variables that reference
rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and
sofcantsendmore() use these globals to clear fd_set bits. When
sofcantrcvmore() is called, the wfds bit is cleared so that the write
handler will no longer be run for this iteration of the event loop.
This actually seems buggy to me since TCP connections can be half-closed
and we'd still want to handle data in half-duplex fashion. I think the
real intention is to avoid running the read/write handler when the
socket has been fully closed. This is indicated with the SS_NOFDREF
state bit so we now check for it before invoking the TCP write handler.
Note that UDP/ICMP code paths don't care because they are
connectionless.
Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces.
I followed the style of the surrounding code.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id:
1361356113-11049-6-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Hajnoczi [Wed, 20 Feb 2013 10:28:27 +0000 (11:28 +0100)]
slirp: slirp/slirp.c coding style cleanup
The slirp glue code uses tabs in some places. Since the next patch will
modify the file, convert tabs to spaces and fix checkpatch.pl issues.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id:
1361356113-11049-5-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Hajnoczi [Wed, 20 Feb 2013 10:28:26 +0000 (11:28 +0100)]
main-loop: switch POSIX glib integration to GPollFD
Convert glib file descriptor polling from rfds/wfds/xfds to GPollFD.
The Windows code still needs poll_fds[] and n_poll_fds but they can now
become local variables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id:
1361356113-11049-4-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Hajnoczi [Wed, 20 Feb 2013 10:28:25 +0000 (11:28 +0100)]
main-loop: switch to g_poll() on POSIX hosts
Use g_poll(3) instead of select(2). Well, this is kind of a cheat.
It's true that we're now using g_poll(3) on POSIX hosts but the *_fill()
and *_poll() functions are still using rfds/wfds/xfds.
We've set the scene to start converting *_fill() and *_poll() functions
step-by-step until no more rfds/wfds/xfds users remain. Then we'll drop
the temporary gpollfds_from_select() and gpollfds_to_select() functions
and be left with native g_poll(2).
On Windows things are a little crazy: convert from rfds/wfds/xfds to
GPollFDs, back to rfds/wfds/xfds, call select(2), rfds/wfds/xfds back to
GPollFDs, and finally back to rfds/wfds/xfds again. This is only
temporary and keeps the Windows build working through the following
patches. We'll drop this excessive conversion later and be left with a
single GPollFDs -> select(2) -> GPollFDs sequence that allows Windows to
use select(2) while the rest of QEMU only knows about GPollFD.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id:
1361356113-11049-3-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Hajnoczi [Wed, 20 Feb 2013 10:28:24 +0000 (11:28 +0100)]
main-loop: fix select_ret uninitialized variable warning
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id:
1361356113-11049-2-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 21 Feb 2013 15:39:17 +0000 (09:39 -0600)]
Merge remote-tracking branch 'kraxel/usb.78' into staging
# By Gerd Hoffmann
# Via Gerd Hoffmann
* kraxel/usb.78:
uas-uas: usb3 streams
usb-xhci: usb3 streams
usb-core: usb3 streams
usb: fix endpoint descriptor ordering
usb-redir: simplify packet copy
usb: make usb_packet_copy operate on combined packets
usb: add usb_ep_set_halted
usb-host: remove usb_host_device_close
usb-host: move legacy cmd line bits
usb-storage: use scsi_req_enqueue return value
allow disabling usb smartcard support
make usb devices configurable
fix scripts/make_device_config.sh
usb: Makefile cleanup
Anthony Liguori [Thu, 21 Feb 2013 15:38:27 +0000 (09:38 -0600)]
Merge remote-tracking branch 'stefanha/trivial-patches' into staging
# By Alin Tomescu (1) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
.gitignore: Ignore optionrom/*.asm
ppc: fix bamboo >256MB RAM initialization in hw/ppc4xx_devs.c
Add some missing qtest binaries to .gitignore
xilinx_axienet.c: Assert no error when making link
Remove forward declaration of non-existant variable
Cole Robinson [Tue, 19 Feb 2013 22:41:28 +0000 (17:41 -0500)]
.gitignore: Ignore optionrom/*.asm
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Alin Tomescu [Thu, 21 Feb 2013 02:36:09 +0000 (21:36 -0500)]
ppc: fix bamboo >256MB RAM initialization in hw/ppc4xx_devs.c
I was trying to launch a PowerPC "bamboo" machine with more than 256MB of RAM
with qemu-system-ppc -M bamboo -kernel $kernel -initrd $ramdisk -m 512, but QEMU
would just hang. However, when I used -m 256, the machine would boot.
I looked through the code in hw/ and it seems there is an error when the
RAM memory is setup (if my understanding is correct).
After patching it, the machine launched and booted successfully with 512MB of
RAM.
Signed-off-by: Alin Tomescu <tomescu.alin@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
David Gibson [Thu, 21 Feb 2013 02:34:40 +0000 (13:34 +1100)]
Add some missing qtest binaries to .gitignore
These binaries are generated during make check on at least some
configurations, so att them to .gitignore.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Crosthwaite [Mon, 11 Feb 2013 07:16:05 +0000 (17:16 +1000)]
xilinx_axienet.c: Assert no error when making link
This gives an awful silent failure when it doesn't work. Assert against link
creation failure.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Hervé Poussineau [Sun, 10 Feb 2013 22:11:05 +0000 (23:11 +0100)]
Remove forward declaration of non-existant variable
This variable has been removed 5 years ago in
970ac5a3082428dca91171f270dcd95d6f4b2636.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Gerd Hoffmann [Fri, 25 Jan 2013 16:38:59 +0000 (17:38 +0100)]
uas-uas: usb3 streams
Add usb3 streams support to the uas (usb attached scsi) emulation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 25 Jan 2013 16:23:44 +0000 (17:23 +0100)]
usb-xhci: usb3 streams
Add streams support to the xhci emulation. No secondary streams yet,
only linear stream arays are supported for now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 29 Jan 2013 11:44:35 +0000 (12:44 +0100)]
usb-core: usb3 streams
This patch adds support for usb3 streams to the usb subsystem core.
This is just adding a streams field / parameter in a number of places.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Mon, 28 Jan 2013 14:52:57 +0000 (15:52 +0100)]
usb: fix endpoint descriptor ordering
Fix the ordering of the endpoint descriptors for superspeed endpoints:
The superspeed companion must come first, possible additional
descriptors for the endpoint after that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Thu, 24 Jan 2013 14:40:37 +0000 (15:40 +0100)]
usb-redir: simplify packet copy
usb_packet_copy can handle combined packets now,
so it isn't needed to special-case them any more.
Also use the new usb_packet_size() function.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Thu, 24 Jan 2013 14:38:23 +0000 (15:38 +0100)]
usb: make usb_packet_copy operate on combined packets
Likewise usb_packet_skip.
Also usb_packet_size.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 12 Dec 2012 12:40:59 +0000 (13:40 +0100)]
usb: add usb_ep_set_halted
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 30 Nov 2012 12:02:47 +0000 (13:02 +0100)]
usb-host: remove usb_host_device_close
Nobody implements that anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 23 Jan 2013 13:15:38 +0000 (14:15 +0100)]
usb-host: move legacy cmd line bits
The code handling the "-usbdevice host:..." legacy command line
syntax is moved to the new hw/usb/host-legacy.c file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 22 Jan 2013 13:17:05 +0000 (14:17 +0100)]
usb-storage: use scsi_req_enqueue return value
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 1 Feb 2013 10:08:24 +0000 (11:08 +0100)]
allow disabling usb smartcard support
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 1 Feb 2013 09:49:43 +0000 (10:49 +0100)]
make usb devices configurable
Leave the core usb devices (usb hub, tablet, mouse, keyboard)
enabled unconditionally. Make the other ones configurable.
Exceptions:
- bluetooth: not qdevified yet, has a vl.c dependency because
of that, thus disabling isn't as easy as not linking the
object file.
- smardcard: ccid-card-emulated depends on that one *and*
CONFIG_SMARTCARD_NSS. So it isn't a one-liner and comes
as separate patch because of that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 1 Feb 2013 09:48:34 +0000 (10:48 +0100)]
fix scripts/make_device_config.sh
Make it handle multiple include statements in a file:
(1) The printf needs a space so the include files will be separated.
(2) Also $f can contain multiple failes, so redirection will not work
and we have to use cat to process all files.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 1 Feb 2013 08:53:17 +0000 (09:53 +0100)]
usb: Makefile cleanup
Group files, sprinkle in some comments.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Paolo Bonzini [Fri, 11 Jan 2013 16:46:57 +0000 (17:46 +0100)]
rtc-test: add testcases for alarms in 12hour mode
Trying (unsuccessfully) to break the device model as mentioned in
https://bugs.launchpad.net/qemu/+bug/
1090558.
At least if someone tries to fix that, it won't break what works...
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
1357922817-17584-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Fri, 11 Jan 2013 16:46:56 +0000 (17:46 +0100)]
rtc-test: always set register B in its entirety
Eliminate dependencies between one test and the others.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
1357922817-17584-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Andre Przywara [Thu, 18 Oct 2012 09:16:58 +0000 (11:16 +0200)]
vnc-tls: Fix compilation with newer versions of GNU-TLS
In my installation of GNU-TLS (v3.0.23) the type
gnutls_anon_server_credentials is marked deprecated, so -Werror
breaks compilation.
Simply replacing it with the newer ..._t version fixed the compilation
on my machine (Slackware 14.0). I cannot tell how far back this "new"
type goes, at least the header file in RHEL 5.0 (v1.4.1) seems to have
it already. If someone finds a broken distribution, tell me and I
insert some compat code.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Message-id:
1350551818-14717-1-git-send-email-andre.przywara@amd.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Wed, 13 Feb 2013 18:49:43 +0000 (19:49 +0100)]
doc help: Collect block device stuff under its own heading
Collect them from "Standard options", "File system options", "Virtual
File system pass-through options", "Debug/Expert options".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1360781383-28635-8-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Wed, 13 Feb 2013 18:49:42 +0000 (19:49 +0100)]
doc help: A few options are under inappropriate headings, fix
--device is under heading "USB options". --name and --uuid are under
"Virtual File system pass-through options". Move all three to
"Standard options".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1360781383-28635-7-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Wed, 13 Feb 2013 18:49:41 +0000 (19:49 +0100)]
help: Fix markup of heading "USB options" so it appears in -help
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1360781383-28635-6-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Wed, 13 Feb 2013 18:49:40 +0000 (19:49 +0100)]
doc: Fix texinfo @table markup in qemu-options.hx
End tables before headings, start new ones afterwards. Fixes
incorrect indentation of headings "File system options" and "Virtual
File system pass-through options" in manual page and qemu-doc.
Normalize markup some to increase chances it survives future edits.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1360781383-28635-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Wed, 13 Feb 2013 18:49:39 +0000 (19:49 +0100)]
doc: Fill some option doc gaps in manual page and qemu-doc
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1360781383-28635-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Wed, 13 Feb 2013 18:49:38 +0000 (19:49 +0100)]
doc: Fix some option entries in qemu-doc's function index
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1360781383-28635-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Wed, 13 Feb 2013 18:49:37 +0000 (19:49 +0100)]
help: Drop bogus help on -qtest and -qtest-log
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1360781383-28635-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Andreas Färber [Sat, 16 Feb 2013 10:27:26 +0000 (11:27 +0100)]
isa: Split off instance_init for ISADevice
Prepares for assigning IRQs before QOM realize.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id:
1361010446-1427-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Andreas Färber [Sat, 16 Feb 2013 21:44:03 +0000 (22:44 +0100)]
qtest: Add MMIO support
Introduce [qtest_]{read,write}[bwlq]() libqtest functions and
corresponding QTest protocol commands to replace local versions in
libi2c-omap.c.
Also convert m48t59-test's cmos_{read,write}_mmio() to {read,write}b().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id:
1361051043-27944-4-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Andreas Färber [Sat, 16 Feb 2013 21:44:02 +0000 (22:44 +0100)]
libqtest: Introduce qtest_qmpv() and convert remaining macro
In order to convert qmp() macro to an inline function, expose a
qtest_qmpv() function, reused by qtest_qmp().
We can't apply GCC_FMT_ATTR() since fdc-test is using zero-length format
strings, which would result in warnings treated as errors.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id:
1361051043-27944-3-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Andreas Färber [Sat, 16 Feb 2013 21:44:01 +0000 (22:44 +0100)]
libqtest: Convert macros to functions and clean up documentation
libqtest.h provides a number of shortcut macros to avoid tests feeding
it the QTestState they operate on. Most of these can easily be turned
into static inline functions, so let's do that for clarity.
This avoids getting off-by-one error messages when passing wrong args.
Some macros had a val argument but documented @value argument. Fix this.
While touching things, enforce gtk-doc markup for return values and for
referencing types.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id:
1361051043-27944-2-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 18 Feb 2013 14:37:29 +0000 (08:37 -0600)]
Merge remote-tracking branch 'afaerber/qom-cpu' into staging
# By Andreas Färber
# Via Andreas Färber
* afaerber/qom-cpu: (47 commits)
target-i386: Split command line parsing out of cpu_x86_register()
target-i386: Move cpu_x86_init()
target-lm32: Drop unused cpu_lm32_close() prototype
target-s390x: Drop unused cpu_s390x_close() prototype
spapr_hcall: Replace open-coded CPU loop with qemu_get_cpu()
ppce500_spin: Replace open-coded CPU loop with qemu_get_cpu()
e500: Replace open-coded loop with qemu_get_cpu()
cpu: Add CPUArchState pointer to CPUState
cputlb: Pass CPUState to cpu_unlink_tb()
cpu: Move current_tb field to CPUState
cpu: Move exit_request field to CPUState
cpu: Move running field to CPUState
cpu: Move host_tid field to CPUState
target-cris: Introduce CRISCPU subclasses
target-m68k: Pass M68kCPU to m68k_set_irq_level()
mcf_intc: Pass M68kCPU to mcf_intc_init()
mcf5206: Pass M68kCPU to mcf5206_init()
target-m68k: Return M68kCPU from cpu_m68k_init()
ppc405_uc: Pass PowerPCCPU to ppc40x_{core,chip,system}_reset()
target-xtensa: Move TCG initialization to XtensaCPU initfn
...
Richard Henderson [Sat, 16 Feb 2013 20:47:01 +0000 (12:47 -0800)]
tests: Add unit tests for mulu64 and muls64
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Sat, 16 Feb 2013 20:47:00 +0000 (12:47 -0800)]
host-utils: Improve mulu64 and muls64
The new formulation makes better use of add-with-carry type insns
that the host may have. Use gcc's sign adjustment trick to avoid
having to perform a 128-bit negation.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Sat, 16 Feb 2013 20:46:59 +0000 (12:46 -0800)]
host-utils: Use __int128_t for mul[us]64
Replace some x86_64 specific inline assembly with something that
all 64-bit hosts ought to optimize well. At worst this becomes
a call to the gcc __multi3 routine, which is no worse than our
implementation in util/host-utils.c.
With gcc 4.7, we get identical code generation for x86_64. We
now get native multiplication on ia64 and s390x hosts. With minor
improvements to gcc we can get it for ppc64 as well.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Andreas Färber [Sat, 16 Feb 2013 22:21:24 +0000 (23:21 +0100)]
tcg/ppc: Fix build of tcg_qemu_tb_exec()
Commit
0b0d3320db74cde233ee7855ad32a9c121d20eb4 (TCG: Final globals
clean-up) moved code_gen_prologue but forgot to update ppc code.
This broke the build on 32-bit ppc. ppc64 is unaffected.
Cc: Evgeny Voevodin <evgenyvoevodin@gmail.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Andreas Färber [Sun, 27 Jan 2013 13:32:05 +0000 (14:32 +0100)]
target-sparc: Fix debug output for DEBUG_MMU
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Andreas Färber [Fri, 15 Feb 2013 13:06:56 +0000 (14:06 +0100)]
target-i386: Split command line parsing out of cpu_x86_register()
In order to instantiate a CPU subtype we will need to know which type,
so move the cpu_model splitting into cpu_x86_init().
Parameters need to be set on the X86CPU instance, so move
cpu_x86_parse_featurestr() into cpu_x86_init() as well.
This leaves cpu_x86_register() operating on the model name only.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Fri, 1 Feb 2013 14:12:13 +0000 (15:12 +0100)]
target-i386: Move cpu_x86_init()
Consolidate CPU functions in cpu.c.
Allows to make cpu_x86_register() static.
No functional changes.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sat, 2 Feb 2013 11:13:15 +0000 (12:13 +0100)]
target-lm32: Drop unused cpu_lm32_close() prototype
It was never implemented.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sat, 2 Feb 2013 11:10:37 +0000 (12:10 +0100)]
target-s390x: Drop unused cpu_s390x_close() prototype
It was never implemented.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Fri, 15 Feb 2013 15:43:08 +0000 (16:43 +0100)]
spapr_hcall: Replace open-coded CPU loop with qemu_get_cpu()
The helper functions all access ppc-specific fields only so don't bother
to change arguments to PowerPCCPU and use env_ptr instead.
No functional change.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Fri, 15 Feb 2013 14:56:27 +0000 (15:56 +0100)]
ppce500_spin: Replace open-coded CPU loop with qemu_get_cpu()
Potentially env could be NULL whereas cpu would still be valid and
correspond to a previous env.
Wrapping this in qemu_get_cpu(), env is no longer needed, so simplify
code that existed before
55e5c2850293547203874098f7cec148ffd12dfa.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Fri, 15 Feb 2013 14:21:13 +0000 (15:21 +0100)]
e500: Replace open-coded loop with qemu_get_cpu()
Since we still need env for ppc-specific fields, obtain it via the new
env_ptr fields to avoid "cpu" name conflicts between CPUState and
PowerPCCPU for now.
This fixes a potential issue with env being NULL at the end of the loop
but cpu still being a valid pointer corresponding to a previous env.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Thu, 17 Jan 2013 11:13:41 +0000 (12:13 +0100)]
cpu: Add CPUArchState pointer to CPUState
The target-specific ENV_GET_CPU() macros have allowed us to navigate
from CPUArchState to CPUState. The reverse direction was not supported.
Avoid introducing CPU_GET_ENV() macros by initializing an untyped
pointer that is initialized in derived instance_init functions.
The field may not be called "env" due to it being poisoned.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Thu, 17 Jan 2013 08:16:15 +0000 (09:16 +0100)]
cputlb: Pass CPUState to cpu_unlink_tb()
CPUArchState is no longer needed.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Wed, 16 Jan 2013 18:29:31 +0000 (19:29 +0100)]
cpu: Move current_tb field to CPUState
Explictly NULL it on CPU reset since it was located before breakpoints.
Change vapic_report_tpr_access() argument to CPUState. This also
resolves the use of void* for cpu.h independence.
Change vAPIC patch_instruction() argument to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Mon, 17 Dec 2012 07:02:44 +0000 (08:02 +0100)]
cpu: Move exit_request field to CPUState
Since it was located before breakpoints field, it needs to be reset.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Mon, 17 Dec 2012 06:34:52 +0000 (07:34 +0100)]
cpu: Move running field to CPUState
Pass CPUState to cpu_exec_{start,end}() functions.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Mon, 17 Dec 2012 06:12:13 +0000 (07:12 +0100)]
cpu: Move host_tid field to CPUState
Change gdbstub's cpu_index() argument to CPUState now that CPUArchState
is no longer used.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Wed, 6 Feb 2013 16:18:12 +0000 (17:18 +0100)]
target-cris: Introduce CRISCPU subclasses
Use class_init functions to initialize the VR in preparation for
overriding v32+ behavior there.
Move cpu_cris_init() to cpu.c and hook up a class_by_name callback.
This change leads to unknown -cpu model names no longer falling back
to a CPU with VR 32 but instead returning NULL.
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Fri, 18 Jan 2013 13:20:52 +0000 (14:20 +0100)]
target-m68k: Pass M68kCPU to m68k_set_irq_level()
Simplifies use of cpu_reset_interrupt() et al.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Fri, 18 Jan 2013 13:15:09 +0000 (14:15 +0100)]
mcf_intc: Pass M68kCPU to mcf_intc_init()
Store it in mcf_intc_state.
Prepares for passing it to m68k_set_irq_level().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Fri, 18 Jan 2013 13:10:34 +0000 (14:10 +0100)]
mcf5206: Pass M68kCPU to mcf5206_init()
Store it in m5206_mbar_state. Prepares for passing M68kCPU to
m68k_set_irq_level().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Fri, 18 Jan 2013 13:03:58 +0000 (14:03 +0100)]
target-m68k: Return M68kCPU from cpu_m68k_init()
Turn cpu_init() into a static inline function for backwards
compatibility.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Fri, 18 Jan 2013 14:57:51 +0000 (15:57 +0100)]
ppc405_uc: Pass PowerPCCPU to ppc40x_{core,chip,system}_reset()
Prepares for changing cpu_interrupt() argument to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>
Andreas Färber [Sun, 20 Jan 2013 00:46:45 +0000 (01:46 +0100)]
target-xtensa: Move TCG initialization to XtensaCPU initfn
Combine this with breakpoint handler registration, guarding both with
tcg_enabled() to suppress also TCG init for qtest. Rename the handler to
xtensa_breakpoint_handler() since it needs to become global.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 20 Jan 2013 00:36:47 +0000 (01:36 +0100)]
target-unicore32: Move TCG initialization to UniCore32CPU initfn
Normalize the "inited" logic and add a tcg_enabled() check to suppress
it for qtest.
Ensures that a QOM-created UniCore32CPU is usable.
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 20 Jan 2013 00:34:18 +0000 (01:34 +0100)]
target-sparc: Move TCG initialization to SPARCCPU initfn
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 20 Jan 2013 00:30:32 +0000 (01:30 +0100)]
target-sh4: Move TCG initialization to SuperHCPU initfn
Add a tcg_enabled() check to suppress it for qtest.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sat, 19 Jan 2013 21:43:32 +0000 (22:43 +0100)]
target-s390x: Move TCG initialization to S390CPU initfn
Ensures that a QOM-created S390CPU is usable.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 20 Jan 2013 00:26:37 +0000 (01:26 +0100)]
target-ppc: Move TCG initialization to PowerPCCPU initfn
Ensures that a QOM-created PowerPCCPU is usable.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 20 Jan 2013 00:22:25 +0000 (01:22 +0100)]
target-mips: Move TCG initialization to MIPSCPU initfn
Make mips_tcg_init() non-static and add tcg_enabled() check to suppress
it for qtest.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 20 Jan 2013 00:10:52 +0000 (01:10 +0100)]
target-microblaze: Move TCG initialization to MicroBlazeCPU initfn
Split off TCG initialization from cpu_mb_init() into mb_tcg_init() to
call it from the initfn.
Ensures that a QOM-created MicroBlazeCPU is usable.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sat, 19 Jan 2013 23:48:29 +0000 (00:48 +0100)]
target-m68k: Move TCG initialization to M68kCPU initfn
Add a tcg_enabled() check to suppress it for qtest.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sat, 19 Jan 2013 23:05:12 +0000 (00:05 +0100)]
target-lm32: Move TCG initialization to LM32CPU initfn
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sat, 19 Jan 2013 22:55:42 +0000 (23:55 +0100)]
target-cris: Move TCG initialization to CRISCPU initfn
Split out TCG initialization from cpu_cris_init(). Avoid CPUCRISState
dependency for v10-specific initialization and for non-v10 by inlining
the decision into the initfn as well.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sat, 19 Jan 2013 06:37:45 +0000 (07:37 +0100)]
target-arm: Move TCG initialization to ARMCPU initfn
Ensures that a QOM-created ARMCPU is usable.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Wed, 16 Jan 2013 03:19:35 +0000 (04:19 +0100)]
target-xtensa: Introduce QOM realizefn for XtensaCPU
Introduce realizefn and set realized = true in cpu_xtensa_init().
Signed-off-by: Andreas Färber <afaerber@suse.de>