OSDN Git Service
SZEDER Gábor [Fri, 16 Jan 2009 15:37:33 +0000 (16:37 +0100)]
Fix gitdir detection when in subdir of gitdir
If the current working directory is a subdirectory of the gitdir (e.g.
<repo>/.git/refs/), then setup_git_directory_gently() will climb its
parent directories until it finds itself in a gitdir. However, no
matter how many parent directories it climbs, it sets
'GIT_DIR_ENVIRONMENT' to ".", which is obviously wrong.
This behaviour affected at least 'git rev-parse --git-dir' and hence
caused some errors in bash completion (e.g. customized command prompt
when on a detached head and completion of refs).
To fix this, we set the absolute path of the found gitdir instead.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Markus Heidelberg [Fri, 16 Jan 2009 21:42:33 +0000 (22:42 +0100)]
Documentation: let asciidoc align related options
Command line options can share the same paragraph of description, if
they are related or synonymous. In these cases they should be written
among each other, so that asciidoc can format them itself.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephan Beyer [Fri, 16 Jan 2009 20:36:06 +0000 (21:36 +0100)]
githooks.txt: add missing word
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephan Beyer [Fri, 16 Jan 2009 19:40:05 +0000 (20:40 +0100)]
builtin-commit.c: do not remove COMMIT_EDITMSG
git-commit tries to remove the file ./COMMIT_EDITMSG instead of
$GIT_DIR/COMMIT_EDITMSG after commit preparation (e.g. running
hooks, launching editor).
This behavior exists since
f5bbc3225c4b07 "Port git commit to C".
Some test cases (e.g. t/t7502-commit.sh) rely on the existence of
$GIT_DIR/COMMIT_EDITMSG after committing and, I guess, many people
are used to it. So it is best not to remove it.
This patch just removes the removal of COMMIT_EDITMSG.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephan Beyer [Thu, 15 Jan 2009 12:56:16 +0000 (13:56 +0100)]
t3404: Add test case for auto-amending only edited commits after "edit"
Add a test case for the bugfix introduced by commit
c14c3c82d
"git-rebase--interactive: auto amend only edited commit".
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephan Beyer [Thu, 15 Jan 2009 12:56:15 +0000 (13:56 +0100)]
t3404: Add test case for aborted --continue after "edit"
Add a test case for the bugfix introduced by commit
8beb1f33d
"git-rebase-interactive: do not squash commits on abort".
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephan Beyer [Thu, 15 Jan 2009 13:03:17 +0000 (14:03 +0100)]
t3501: check that commits are actually done
The basic idea of t3501 is to check whether revert
and cherry-pick works on renamed files.
But as there is no pure cherry-pick/revert test, it is
good to also check if commits are actually done in that
scenario.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber [Wed, 14 Jan 2009 17:03:22 +0000 (18:03 +0100)]
fix handling of multiple untracked files for git mv -k
The "-k" option to "git mv" should allow specifying multiple untracked
files. Currently, multiple untracked files raise an assertion if they
appear consecutively as arguments. Fix this by decrementing the loop
index after removing one entry from the array of arguments.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber [Wed, 14 Jan 2009 17:03:21 +0000 (18:03 +0100)]
add test cases for "git mv -k"
Add test cases for ignoring nonexisting and untracked files using the -k
option to "git mv". There is one known breakage related to multiple
untracked files specfied as consecutive arguments.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Felipe Contreras [Wed, 14 Jan 2009 01:37:07 +0000 (03:37 +0200)]
fast-import: Cleanup mode setting.
"S_IFREG | mode" makes only sense for 0644 and 0755.
Even though doing (S_IFREG | mode) may not hurt when mode is any other
supported value, that is only true because S_IFREG mode bit happens to
be already on for S_IFLNK or S_IFGITLINK.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jay Soffian [Tue, 13 Jan 2009 22:41:35 +0000 (17:41 -0500)]
Git.pm: call Error::Simple() properly
The error message to Error::Simple() must be passed as a single argument.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pierre Habouzit [Mon, 12 Jan 2009 23:09:36 +0000 (00:09 +0100)]
Avoid spurious error messages on error mistakes.
Prior to that, if the user chose "squash" as a first action, the stderr
looked like:
grep: /home/madcoder/dev/scm/git/.git/rebase-merge/done: No such file or directory
Cannot 'squash' without a previous commit
Now the first line is gone.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
jidanni@jidanni.org [Tue, 13 Jan 2009 01:19:42 +0000 (09:19 +0800)]
contrib/examples/README: give an explanation of the status of these files
We attempt to give an explanation of the status of the files in this
directory.
Signed-off-by: jidanni <jidanni@jidanni.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 7 Jan 2009 06:12:30 +0000 (22:12 -0800)]
Merge branch 'maint-1.5.6' into maint-1.6.0
* maint-1.5.6:
README: tutorial.txt is now called gittutorial.txt
Joey Hess [Wed, 7 Jan 2009 04:23:37 +0000 (23:23 -0500)]
README: tutorial.txt is now called gittutorial.txt
Signed-off-by: Joey Hess <joey@gnu.kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Markus Heidelberg [Sun, 21 Dec 2008 16:30:22 +0000 (17:30 +0100)]
doc/git-fsck: change the way for getting heads' SHA1s
The straightforward way with using 'cat .git/refs/heads/*' doesn't work
with packed refs as well as branches of the form topic/topic1. So let's
use git-for-each-ref for getting the heads' SHA1s in this example.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 20 Dec 2008 03:27:06 +0000 (19:27 -0800)]
GIT 1.6.0.6
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 19 Dec 2008 22:41:21 +0000 (14:41 -0800)]
fast-import: make tagger information optional
Even though newer Porcelain tools always record the tagger information
when creating new tags, export/import pair should be able to faithfully
reproduce ancient tag objects that lack tagger information.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Schindelin [Sat, 20 Dec 2008 00:00:27 +0000 (01:00 +0100)]
fast-export: deal with tag objects that do not have a tagger
When no tagger was found (old Git produced tags like this),
no "tagger" line is printed (but this is incompatible with the current
git fast-import).
Alternatively, you can pass the option --fake-missing-tagger, forcing
fast-export to fake a tagger
Unspecified Tagger <no-tagger>
with a tag date of the beginning of (Unix) time in the case of a missing
tagger, so that fast-import is still able to import the result.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Miklos Vajna [Sat, 20 Dec 2008 00:52:17 +0000 (01:52 +0100)]
SubmittingPatches: mention the usage of real name in Signed-off-by: lines
Especially with something that is supposed to hopefully have some legal
value down the line if somebody starts making noises, it really would be
nice to have a real person to associate things with. Suggest this in the
SubmittingPatches document.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Aguilar [Sat, 20 Dec 2008 01:01:01 +0000 (17:01 -0800)]
git-mergetool: properly handle "git mergetool -- filename"
Like many git commands, git-mergetool allows "--" to signal
the end of option processing. This adds a missing "shift"
statement so that this is correctly handled.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wu Fengguang [Fri, 19 Dec 2008 08:10:10 +0000 (16:10 +0800)]
git-send-email: handle email address with quoted comma
Correctly handle email addresses containing quoted commas, e.g.
"Zhu, Yi" <yi.zhu@intel.com>, "Li, Shaohua" <shaohua.li@intel.com>
The commas inside the double quotes are not separators.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Markus Heidelberg [Fri, 19 Dec 2008 12:14:18 +0000 (13:14 +0100)]
Documentation: fix typos, grammar, asciidoc syntax
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 17 Dec 2008 06:13:36 +0000 (22:13 -0800)]
GIT 1.5.6.6
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 17 Dec 2008 06:08:22 +0000 (22:08 -0800)]
GIT 1.5.5.6
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 17 Dec 2008 06:03:29 +0000 (22:03 -0800)]
GIT 1.5.4.7
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 17 Dec 2008 03:42:02 +0000 (19:42 -0800)]
gitweb: do not run "git diff" that is Porcelain
Jakub says that legacy-style URI to view two blob differences are never
generated since 1.4.3. This codepath runs "git diff" Porcelain from the
gitweb, which is a no-no. It can trigger diff.external command that is
specified in the configuration file of the repository being viewed.
This patch applies to v1.5.4 and later.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Mon, 15 Dec 2008 21:11:40 +0000 (22:11 +0100)]
fast-import: close pack before unlinking it
This is sort of a companion patch to
4723ee9(Close files opened by
lock_file() before unlinking.): on Windows, you cannot delete what
is still open.
This makes test 9300-fast-import pass on Windows for me; quite a few
fast-imports leave temporary packs until the test "blank lines not
necessary after other commands" actually tests for the number of files
in .git/objects/pack/, which has a few temporary packs now.
I guess that
8b4eb6b(Do not perform cross-directory renames when
creating packs) was "responsible" for the breakage.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 15 Dec 2008 08:33:34 +0000 (00:33 -0800)]
pager: do not dup2 stderr if it is already redirected
An earlier commit
61b8050 (sending errors to stdout under $PAGER,
2008-02-16) avoided losing the error messages that are sent to the
standard error when $PAGER is in effect by dup2'ing fd 2 to the pager.
his way, showing a tag object that points to a bad object:
$ git show tag-foo
would give the error message to the pager. However, it was not quite
right if the user did:
$ git show 2>error.log tag-foo
i.e. use the pager but store the errors in a separate file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 15 Dec 2008 08:36:56 +0000 (00:36 -0800)]
git-show: do not segfault when showing a bad tag
When a tag points at a bad or nonexistent object, we should diagnose the
breakage and exit. An earlier commit
4f3dcc2 (Fix 'git show' on signed
tag of signed tag of commit, 2008-07-01) lost this check and made it
segfault instead; not good.
This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jim Meyering [Fri, 12 Dec 2008 09:00:41 +0000 (10:00 +0100)]
git-config.txt: fix a typo
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Thu, 11 Dec 2008 03:44:37 +0000 (19:44 -0800)]
fsck: reduce stack footprint
The logic to mark all objects that are reachable from tips of refs were
implemented as a set of recursive functions. In a repository with a deep
enough history, this can easily eat up all the available stack space.
Restructure the code to require less stackspace by using an object array
to keep track of the objects that still need to be processed.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nicolas Pitre [Tue, 9 Dec 2008 19:26:52 +0000 (14:26 -0500)]
make sure packs to be replaced are closed beforehand
Especially on Windows where an opened file cannot be replaced, make
sure pack-objects always close packs it is about to replace. Even on
non Windows systems, this could save potential bad results if ever
objects were to be read from the new pack file using offset from the old
index.
This should fix t5303 on Windows.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Tested-by: Johannes Sixt <j6t@kdbg.org> (MinGW)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 8 Dec 2008 02:38:46 +0000 (18:38 -0800)]
work around Python warnings from AsciiDoc
It appears that a reference to an anchor defined as [[anchor-name]] from
another place using <<anchor-name>> syntax, when the anchor name contains
a string "-with-" in its name, triggers these warnings from Python
interpreter.
asciidoc -b docbook -d book user-manual.txt
<string>:1: Warning: 'with' will become a reserved keyword in Python 2.6
<string>:1: Warning: 'with' will become a reserved keyword in Python 2.6
<string>:1: Warning: 'with' will become a reserved keyword in Python 2.6
<string>:1: Warning: 'with' will become a reserved keyword in Python 2.6
There currently is no reference to "Finding comments with given content",
but for consistency and for futureproofing, the anchor is also updated as
the other ones that are actually used and trigger these warnings.
Signed-off-by: Junio C Hamano <junio@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Deskin Miller [Mon, 8 Dec 2008 13:31:31 +0000 (08:31 -0500)]
git-svn: Make following parents atomic
find_parent_branch generates branch@rev type branches when one has to
look back through SVN history to properly get the history for a branch
copied from somewhere not already being tracked by git-svn. If in the
process of fetching this history, git-svn is interrupted, then when one
fetches again, it will use whatever was last fetched as the parent
commit and fail to fetch any more history which it didn't get to before
being terminated. This is especially troubling in that different
git-svn copies of the same SVN repository can end up with different
commit sha1s, incorrectly showing the history as divergent and
precluding easy collaboration using git push and fetch.
To fix this, when we initialise the Git::SVN object $gs to search for
and perhaps fetch history, we check if there are any commits in SVN in
the range between the current revision $gs is at, and the top revision
for which we were asked to fill history. If there are commits we're
missing in that range, we continue the fetch from the current revision
to the top, properly getting all history before using it as the parent
for the branch we're trying to create.
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 7 Dec 2008 11:03:16 +0000 (03:03 -0800)]
GIT 1.6.0.5
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matt McCutchen [Sat, 11 Oct 2008 01:56:15 +0000 (21:56 -0400)]
"git diff <tree>{3,}": do not reverse order of arguments
According to the message of commit
0fe7c1de16f71312e6adac4b85bddf0d62a47168,
"git diff" with three or more trees expects the merged tree first followed by
the parents, in order. However, this command reversed the order of its
arguments, resulting in confusing diffs. A comment /* Again, the revs are all
reverse */ suggested there was a reason for this, but I can't figure out the
reason, so I removed the reversal of the arguments. Test case included.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jeff King [Sat, 6 Dec 2008 19:40:34 +0000 (14:40 -0500)]
tag: delete TAG_EDITMSG only on successful tag
The user may put some effort into writing an annotated tag
message. When the tagging process later fails (which can
happen fairly easily, since it may be dependent on gpg being
correctly configured and used), there is no record left on
disk of the tag message.
Instead, let's keep the TAG_EDITMSG file around until we are
sure the tag has been created successfully. If we die
because of an error, the user can recover their text from
that file. Leaving the file in place causes no conflicts;
it will be silently overwritten by the next annotated tag
creation.
This matches the behavior of COMMIT_EDITMSG, which stays
around in case of error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Sun, 7 Dec 2008 09:36:36 +0000 (10:36 +0100)]
gitweb: Make project specific override for 'grep' feature work
The 'grep' feature was marked in the comments as having project
specific config, but it lacked 'sub' key required for it to work.
Kind-of-Noticed-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Miklos Vajna [Sun, 7 Dec 2008 00:45:37 +0000 (01:45 +0100)]
http.c: use 'git_config_string' to get 'curl_http_proxy'
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Sat, 6 Dec 2008 20:50:09 +0000 (21:50 +0100)]
fetch-pack: Avoid memcpy() with src==dst
memcpy() may only be used for disjoint memory areas, but when invoked
from cmd_fetch_pack(), we have my_args == &args. (The argument cannot
be removed entirely because transport.c invokes with its own
variable.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 3 Dec 2008 07:47:25 +0000 (23:47 -0800)]
Merge branch 'jk/maint-commit-v-strip' into maint
* jk/maint-commit-v-strip:
commit: Fix stripping of patch in verbose mode.
Davide Libenzi [Sat, 8 Nov 2008 05:24:33 +0000 (21:24 -0800)]
xdiff: give up scanning similar lines early
In a corner case of large files whose lines do not match uniquely, the
loop to eliminate a line that matches multiple locations adjacent to a run
of lines that do not uniquely match wasted too much cycles. Fix this by
giving up early after scanning 100 lines in both direction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 3 Dec 2008 07:00:04 +0000 (23:00 -0800)]
Merge branch 'bc/maint-keep-pack' into maint
* bc/maint-keep-pack:
repack: only unpack-unreachable if we are deleting redundant packs
t7700: test that 'repack -a' packs alternate packed objects
pack-objects: extend --local to mean ignore non-local loose objects too
sha1_file.c: split has_loose_object() into local and non-local counterparts
t7700: demonstrate mishandling of loose objects in an alternate ODB
builtin-gc.c: use new pack_keep bitfield to detect .keep file existence
repack: do not fall back to incremental repacking with [-a|-A]
repack: don't repack local objects in packs with .keep file
pack-objects: new option --honor-pack-keep
packed_git: convert pack_local flag into a bitfield and add pack_keep
t7700: demonstrate mishandling of objects in packs with a .keep file
Junio C Hamano [Wed, 3 Dec 2008 06:38:07 +0000 (22:38 -0800)]
Merge branch 'js/mingw-rename-fix' into maint
* js/mingw-rename-fix:
compat/mingw.c: Teach mingw_rename() to replace read-only files
Miklos Vajna [Mon, 1 Dec 2008 18:50:02 +0000 (19:50 +0100)]
User's Manual: remove duplicated url at the end of Appendix B
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 1 Dec 2008 02:33:20 +0000 (18:33 -0800)]
Update draft release notes to 1.6.0.5
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 1 Dec 2008 02:18:50 +0000 (18:18 -0800)]
Merge branch 'st/maint-tag' into maint
* st/maint-tag:
tag: Add more tests about mixing incompatible modes and options
tag: Check that options are only allowed in the appropriate mode
Junio C Hamano [Mon, 1 Dec 2008 02:18:11 +0000 (18:18 -0800)]
Merge branch 'mk/maint-cg-push' into maint
* mk/maint-cg-push:
git push: Interpret $GIT_DIR/branches in a Cogito compatible way
Nguyễn Thái Ngọc Duy [Sun, 30 Nov 2008 10:54:31 +0000 (17:54 +0700)]
generate-cmdlist.sh: avoid selecting synopsis at wrong place
In "common" man pages there is luckily no "NAME" anywhere except at
beginning of documents. If there is another "NAME", sed could
mis-select it and lead to common-cmds.h corruption. So better nail it
at beginning of line, which would reduce corruption chance.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 28 Nov 2008 03:23:27 +0000 (19:23 -0800)]
Merge branch 'mv/fast-export' into maint
* mv/fast-export:
fast-export: use an unsorted string list for extra_refs
Add new testcase to show fast-export does not always exports all tags
Sam Vilain [Fri, 14 Nov 2008 07:19:34 +0000 (20:19 +1300)]
sha1_file.c: resolve confusion EACCES vs EPERM
An earlier commit
916d081 (Nicer error messages in case saving an object
to db goes wrong, 2006-11-09) confused EACCES with EPERM, the latter of
which is an unlikely error from mkstemp().
Signed-off-by: Sam Vilain <sam@vilain.net>
Joey Hess [Thu, 20 Nov 2008 18:56:28 +0000 (13:56 -0500)]
sha1_file: avoid bogus "file exists" error message
This avoids the following misleading error message:
error: unable to create temporary sha1 filename ./objects/15: File exists
mkstemp can fail for many reasons, one of which, ENOENT, can occur if
the directory for the temp file doesn't exist. create_tmpfile tried to
handle this case by always trying to mkdir the directory, even if it
already existed. This caused errno to be clobbered, so one cannot tell
why mkstemp really failed, and it truncated the buffer to just the
directory name, resulting in the strange error message shown above.
Note that in both occasions that I've seen this failure, it has not been
due to a missing directory, or bad permissions, but some other, unknown
mkstemp failure mode that did not occur when I ran git again. This code
could perhaps be made more robust by retrying mkstemp, in case it was a
transient failure.
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matt McCutchen [Mon, 24 Nov 2008 06:55:22 +0000 (01:55 -0500)]
git checkout: don't warn about unborn branch if -f is already passed
I think it's unnecessary to warn that the checkout has been forced due to an
unborn current branch if -f has been explicitly passed. For one project, I am
using git-new-workdir to create workdirs from a bare repository whose HEAD is
set to an unborn branch, and this warning started to irritate me.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Thu, 27 Nov 2008 13:35:53 +0000 (14:35 +0100)]
bash: offer refs instead of filenames for 'git revert'
The completion script for 'git revert' currently offers options and
filenames. However, 'git revert' doesn't take any filenames from the
command line, but a single commit. Therefore, it's more sane to offer
refs instead.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Thu, 27 Nov 2008 13:35:38 +0000 (14:35 +0100)]
bash: remove dashed command leftovers
Commit
5a625b07 (bash: remove fetch, push, pull dashed form leftovers,
2008-10-03) did that already, but there were still some git-cmd left
here and there.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 27 Nov 2008 21:18:25 +0000 (13:18 -0800)]
Merge branch 'pw/maint-p4' into maint
* pw/maint-p4:
git-p4: fix keyword-expansion regex
Pete Wyckoff [Wed, 26 Nov 2008 18:52:15 +0000 (13:52 -0500)]
git-p4: fix keyword-expansion regex
This text:
my $dir = $File::Find::dir;
return if ($dir !~ m,$options->{dirpat}$,);
was improperly converted to:
my $dir = $File$dir !~ m,$options->{dirpat}$,);
by the keyword identifier expansion code. Add a \n
to make sure the regex doesn't go across end-of-line
boundaries.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ralf Wildenhues [Thu, 27 Nov 2008 07:32:01 +0000 (08:32 +0100)]
Fix typos in the documentation.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 26 Nov 2008 19:57:15 +0000 (11:57 -0800)]
Merge branch 'mm/maint-sort-config-doc' into maint
* mm/maint-sort-config-doc:
config.txt: alphabetize configuration sections
Matt McCutchen [Wed, 26 Nov 2008 08:26:50 +0000 (03:26 -0500)]
config.txt: alphabetize configuration sections
I figured the sections might as well be in some order, so I chose alphabetical
but with "core" at the beginning. This should help people add new variables
in the right places.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 26 Nov 2008 17:58:41 +0000 (09:58 -0800)]
Teach "git diff" to honour --[no-]ext-diff
The original intention of
72909be (Add diff-option --ext-diff, 2007-06-30)
was to optionally allow the use of external diff viewer in "git log"
family (while keeping them disabled by default). It exposed the "allow
external diff" bit to the UI, but forgot to adjust the "git diff" codepath
that was set up to always allow use of the external diff viewer.
Noticed by Nazri Ramliy; tests by René Scharfe squashed in.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Sun, 23 Nov 2008 11:55:54 +0000 (12:55 +0100)]
fast-export: use an unsorted string list for extra_refs
The list extra_refs contains tags and the objects referenced by them,
so that they can be handled at the end. When a tag references a
commit, that commit is added to the list using the same name.
Also, the function handle_tags_and_duplicates() relies on the order
the items were added to extra_refs, so clearly we do not want to
use a sorted list here.
Noticed by Miklos Vajna.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Miklos Vajna [Sat, 22 Nov 2008 18:22:48 +0000 (19:22 +0100)]
Add new testcase to show fast-export does not always exports all tags
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bryan Drewery [Thu, 20 Nov 2008 05:11:42 +0000 (23:11 -0600)]
Fix misleading wording for git-cherry-pick
Documentation for -n implies that -x is normally
used, however this is no longer true.
Signed-off-by: Bryan Drewery <bryan@shatow.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Wed, 19 Nov 2008 16:25:27 +0000 (17:25 +0100)]
compat/mingw.c: Teach mingw_rename() to replace read-only files
On POSIX, rename() can replace files that are not writable. On Windows,
however, read-only files cannot be replaced without additional efforts:
We have to make the destination writable first.
Since the situations where the destination is read-only are rare, we do not
make the destination writable on every invocation, but only if the first
try to rename a file failed with an "access denied" error.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Naewe [Mon, 17 Nov 2008 08:57:19 +0000 (09:57 +0100)]
request-pull: make usage string match manpage
The usage string of 'git request-pull' differs from he manpage
which gives the correct 'synopsis'.
Signed-off-by: Stefan Naewe <stefan.naewe@atlas-elektronik.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 16 Nov 2008 08:10:25 +0000 (00:10 -0800)]
Teach ls-files --with-tree=<tree> to work with options other than -c
Originally --with-tree=<tree> was designed for the sole purpose of
checking if a given pathspec makes sense as a parameter to git-commit
using it in conjunction with --error-unmatch. It had logic to avoid
showing the same entry (one came from the original index, another from the
overlayed tree) twice so that it works with -c (i.e. "show-cached"), but
otherwise it was not designed to work with the flags such as -m, -d, etc.
This teaches the same logic to cover the codepath for -m and -d.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 16 Nov 2008 08:15:43 +0000 (00:15 -0800)]
builtin-ls-files.c: coding style fix.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jan Krüger [Fri, 14 Nov 2008 17:45:14 +0000 (18:45 +0100)]
Documentation: git-svn: fix example for centralized SVN clone
The example that tells users how to centralize the effort of the initial
git svn clone operation doesn't work properly. It uses rebase but that
only works if HEAD exists. This adds one extra command to create a
somewhat sensible HEAD that should work in all cases.
Signed-off-by: Jan Krüger <jk@jk.gs>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Fri, 14 Nov 2008 12:26:47 +0000 (13:26 +0100)]
Documentation: fix links to "everyday.html"
In some places the links are wrong. They should be:
"link:everyday.html", instead of: "linkgit:everyday[7]".
This patch fixes that.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 13 Nov 2008 20:20:37 +0000 (14:20 -0600)]
revision.c: use proper data type in call to sizeof() within xrealloc
A type char** was being used instead of char*.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 13 Nov 2008 20:11:46 +0000 (14:11 -0600)]
repack: only unpack-unreachable if we are deleting redundant packs
The -A option calls pack-objects with the --unpack-unreachable option so
that the unreachable objects in local packs are left in the local object
store loose. But if the -d option to repack was _not_ used, then these
unpacked loose objects are redundant and unnecessary.
Update tests in t7701.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Sun, 17 Aug 2008 04:25:40 +0000 (21:25 -0700)]
date/time: do not get confused by fractional seconds
The date/time parsing code was confused if the input time HH:MM:SS is
followed by fractional seconds. Since we do not record anything finer
grained than seconds, we could just drop fractional part, but there is a
twist.
We have taught people that not just spaces but dot can be used as word
separators when spelling things like:
$ git log --since 2.days
$ git show @{12:34:56.7.days.ago}
and we shouldn't mistake "7" in the latter example as a fraction and
discard it.
The rules are:
- valid days of month/mday are always single or double digits.
- valid years are either two or four digits
No, we don't support the year 600 _anyway_, since our encoding is based
on the UNIX epoch, and the day we worry about the year 10,000 is far
away and we can raise the limit to five digits when we get closer.
- Other numbers (eg "600 days ago") can have any number of digits, but
they cannot start with a zero. Again, the only exception is for
two-digit numbers, since that is fairly common for dates ("Dec 01" is
not unheard of)
So that means that any milli- or micro-second would be thrown out just
because the number of digits shows that it cannot be an interesting date.
A milli- or micro-second can obviously be a perfectly fine number
according to the rules above, as long as it doesn't start with a '0'. So
if we have
12:34:56.123
then that '123' gets parsed as a number, and we remember it. But because
it's bigger than 31, we'll never use it as such _unless_ there is
something after it to trigger that use.
So you can say "12:34:56.123.days.ago", and because of the "days", that
123 will actually be meaninful now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 13 Nov 2008 00:50:26 +0000 (18:50 -0600)]
t7700: test that 'repack -a' packs alternate packed objects
Previously, when 'repack -a' was called and there were no packs in the local
repository without a .keep file, the repack would fall back to calling
pack-objects with '--unpacked --incremental'. This resulted in the created
pack file, if any, to be missing the packed objects in the alternate object
store. Test that this specific case has been fixed.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 12 Nov 2008 23:03:03 +0000 (15:03 -0800)]
Start 1.6.0.5 cycle
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nicolas Pitre [Wed, 12 Nov 2008 18:23:58 +0000 (13:23 -0500)]
Fix pack.packSizeLimit and --max-pack-size handling
If the limit was sufficiently low, having a single object written
could bust the limit (by design), but caused the remaining allowed
size to go negative for subsequent objects, which for an unsigned
variable is a rather huge limit.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 12 Nov 2008 19:52:35 +0000 (11:52 -0800)]
checkout: Fix "initial checkout" detection
Earlier commit
5521883 (checkout: do not lose staged removal, 2008-09-07)
tightened the rule to prevent switching branches from losing local
changes, so that staged removal of paths can be protected, while
attempting to keep a loophole to still allow a special case of switching
out of an un-checked-out state.
However, the loophole was made a bit too tight, and did not allow
switching from one branch (in an un-checked-out state) to check out
another branch.
The change to builtin-checkout.c in this commit loosens it to allow this,
by not insisting the original commit and the new commit to be the same.
It also introduces a new function, is_index_unborn (and an associated
macro, is_cache_unborn), to check if the repository is truly in an
un-checked-out state more reliably, by making sure that $GIT_INDEX_FILE
did not exist when populating the in-core index structure. A few places
the earlier commit
5521883 added the check for the initial checkout
condition are updated to use this function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 12 Nov 2008 08:25:52 +0000 (03:25 -0500)]
commit: Fix stripping of patch in verbose mode.
When the "-v" option is given, we put diff of what is to be committed into
the commit template, and then strip it back out again after the user has
edited it.
We used to look for the diff by searching for the "diff --git a/"
header. With diff.mnemonicprefix set in the configuration, however, this
pattern does not match. The pattern is loosened to cover this case.
Also, if the user puts their own diff in the message (e.g., as a sample
output), then we will accidentally trigger the pattern, removing part of
their output.
We can avoid doing this stripping altogether if the user didn't use "-v"
in the first place, so we know that any match we find will be a false
positive.
[jc: this fix was split out of a series originally meant for master.]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matt Kraai [Fri, 7 Nov 2008 12:26:55 +0000 (04:26 -0800)]
Remove the period after the git-check-attr summary
The period at the end of the git-check-attr summary causes there to be
two periods after the summary in the git(1) manual page.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Mon, 10 Nov 2008 05:59:58 +0000 (23:59 -0600)]
pack-objects: extend --local to mean ignore non-local loose objects too
With this patch, --local means pack only local objects that are not already
packed.
Additionally, this fixes t7700 testing whether loose objects in an alternate
object database are repacked.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Mon, 10 Nov 2008 05:59:57 +0000 (23:59 -0600)]
sha1_file.c: split has_loose_object() into local and non-local counterparts
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Mon, 10 Nov 2008 05:59:56 +0000 (23:59 -0600)]
t7700: demonstrate mishandling of loose objects in an alternate ODB
Loose objects residing in an alternate object database should not be packed
when the -l option to repack is used.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Wed, 12 Nov 2008 17:59:07 +0000 (11:59 -0600)]
builtin-gc.c: use new pack_keep bitfield to detect .keep file existence
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Wed, 12 Nov 2008 17:59:06 +0000 (11:59 -0600)]
repack: do not fall back to incremental repacking with [-a|-A]
When repack is called with either the -a or -A option, the user has
requested to repack all objects including those referenced by the
alternates mechanism. Currently, if there are no local packs without
.keep files, then repack will call pack-objects with the
'--unpacked --incremental' options which causes it to exclude alternate
packed objects. So, remove this fallback.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Wed, 12 Nov 2008 17:59:05 +0000 (11:59 -0600)]
repack: don't repack local objects in packs with .keep file
If the user created a .keep file for a local pack, then it can be inferred
that the user does not want those objects repacked.
This fixes the repack bug tested by t7700.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Wed, 12 Nov 2008 17:59:04 +0000 (11:59 -0600)]
pack-objects: new option --honor-pack-keep
This adds a new option to pack-objects which will cause it to ignore an
object which appears in a local pack which has a .keep file, even if it
was specified for packing.
This option will be used by the porcelain repack.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Wed, 12 Nov 2008 17:59:03 +0000 (11:59 -0600)]
packed_git: convert pack_local flag into a bitfield and add pack_keep
pack_keep will be set when a pack file has an associated .keep file.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Wed, 12 Nov 2008 17:59:02 +0000 (11:59 -0600)]
t7700: demonstrate mishandling of objects in packs with a .keep file
Objects residing in pack files that have an associated .keep file are not
supposed to be repacked into new pack files, but they are.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Koegler [Mon, 10 Nov 2008 21:47:11 +0000 (22:47 +0100)]
git push: Interpret $GIT_DIR/branches in a Cogito compatible way
Current git versions ignore everything after # (called <head> in the
following) when pushing. Older versions (before
cf818348f1ab57),
interpret #<head> as part of the URL, which make git bail out.
As branches origin from Cogito, it is the best to correct this by using
the behaviour of cg-push, that is to push HEAD to remote refs/heads/<head>.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Daniel Lowe [Mon, 10 Nov 2008 21:07:52 +0000 (16:07 -0500)]
Fix non-literal format in printf-style calls
These were found using gcc 4.3.2-1ubuntu11 with the warning:
warning: format not a string literal and no format arguments
Incorporated suggestions from Brandon Casey <casey@nrlssc.navy.mil>.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alexandre Julliard [Tue, 11 Nov 2008 21:09:16 +0000 (22:09 +0100)]
git-submodule: Avoid printing a spurious message.
Fix 'git submodule update' to avoid printing a spurious "Maybe you want
to use 'update --init'?" once for every uninitialized submodule it
encounters.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Naewe [Tue, 11 Nov 2008 15:52:31 +0000 (16:52 +0100)]
git ls-remote: make usage string match manpage
The usage string of 'git ls-remote' is pretty terse. The manpage
however gives the correct 'synopsis'.
Signed-off-by: Stefan Naewe <stefan.naewe@atlas-elektronik.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 11 Nov 2008 21:12:17 +0000 (13:12 -0800)]
Makefile: help people who run 'make check' by mistake
The target to run self test is 'make test', but there are people who try
'make check' and worse yet do not have sparse installed.
Suggest 'make test' target when they do not have 'sparse'.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Sun, 9 Nov 2008 13:53:14 +0000 (14:53 +0100)]
Documentation: bisect: change a few instances of "git-cmd" to "git cmd"
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Sun, 9 Nov 2008 13:46:35 +0000 (14:46 +0100)]
Documentation: rev-list: change a few instances of "git-cmd" to "git cmd"
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alexandre Julliard [Sat, 8 Nov 2008 12:03:59 +0000 (13:03 +0100)]
checkout: Don't crash when switching away from an invalid branch.
When using alternates, it is possible for HEAD to end up pointing to
an invalid commit. git checkout should be able to recover from that
situation without crashing.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 9 Nov 2008 01:33:50 +0000 (17:33 -0800)]
GIT 1.6.0.4
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Quy Tonthat [Fri, 12 Sep 2008 16:22:44 +0000 (02:22 +1000)]
Update RPM spec for the new location of git-cvsserver.
git-cvsserver has been moved from libexecdir to bindir.
Signed-off-by: Quy Tonthat <qtonthat@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 9 Nov 2008 01:32:49 +0000 (17:32 -0800)]
Merge branch 'cb/maint-update-ref-fix' into maint
* cb/maint-update-ref-fix:
push: fix local refs update if already up-to-date
do not force write of packed refs