OSDN Git Service
Christian König [Thu, 22 Feb 2018 14:52:31 +0000 (15:52 +0100)]
drm/ttm: drop persistent_swap_storage from ttm_bo_init and co
Never used as parameter, the only driver actually using this is nouveau
and there it is initialized after the BO is initialized.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 21 Feb 2018 19:34:13 +0000 (20:34 +0100)]
drm/ttm: drop ttm->dummy_read_page
Only used by the AGP backend and there it can be easily accessed using
ttm->bdev->glob.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 21 Feb 2018 18:02:06 +0000 (19:02 +0100)]
drm/ttm: drop ttm->glob
The pointer is available as ttm->bdev->glob as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 21 Feb 2018 16:26:45 +0000 (17:26 +0100)]
drm/ttm: drop bo->glob
The pointer is available as bo->bdev->glob as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 13:53:42 +0000 (14:53 +0100)]
staging: vboxvideo: remove ttm_pool_* wrappers
TTM calls the default implementation now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 11:12:41 +0000 (12:12 +0100)]
drm/bochs: remove the default ttm_tt_populate callbacks
TTM calls the default implementation now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 11:11:25 +0000 (12:11 +0100)]
drm/cirrus: remove ttm_pool_* wrappers
TTM calls the default implementation now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 11:06:59 +0000 (12:06 +0100)]
drm/qxl: remove ttm_pool_* wrappers
TTM calls the default implementation now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 11:05:09 +0000 (12:05 +0100)]
drm/ast: remove ttm_pool_* wrappers
TTM calls the default implementation now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 11:03:58 +0000 (12:03 +0100)]
drm/hisilicon: remove ttm_pool_* wrappers
TTM calls the default implementation now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 11:02:36 +0000 (12:02 +0100)]
drm/mgag200: remove ttm_pool_* wrappers
TTM calls the default implementation now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 11:01:38 +0000 (12:01 +0100)]
drm/virtio: remove ttm_pool_* wrappers
TTM calls the default implementation now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 11:00:05 +0000 (12:00 +0100)]
drm/ttm: add default implementations for ttm_tt_(un)populate
Use ttm_pool_populate/ttm_pool_unpopulate if the driver doesn't provide
a function.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 22 Feb 2018 12:46:49 +0000 (20:46 +0800)]
drm/amd/pp: Move common dpm check functions to hardwaremanager.c
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Fri, 23 Feb 2018 05:13:13 +0000 (13:13 +0800)]
drm/amd/pp: Cleaning up vega10_enable_dpm_tasks function
1. move display num initialize out of dpm enable tasks.
2. do not set/restore smc telemetry if dpm is runing.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 22 Feb 2018 12:27:07 +0000 (20:27 +0800)]
drm/amd/pp: Refine code in powerplay for Cz/Vega10
Add dpm check functions on CZ/Vega10 to smu backend
function table.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 22 Feb 2018 09:20:53 +0000 (17:20 +0800)]
drm/amd/pp: Remove dead error checking code on Vega10
when smu failed, print out the error info immediately
for debug. smum_send_msg_to_smu always return true,
so no need to check return value.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 22 Feb 2018 08:50:57 +0000 (16:50 +0800)]
drm/amd/pp: Add debug info when smu failed on Vega10
When smu msssage failed, print out return value in dmesg.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 22 Feb 2018 08:33:05 +0000 (16:33 +0800)]
drm/amd/pp: Remove duplicated vega10_is_smc_ram_running calls
Avoid conflicts in reading the same register mmPCIE_INDEX2
with other clients
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Corentin Labbe [Thu, 22 Feb 2018 08:21:49 +0000 (08:21 +0000)]
drm/amd: Remove inclusion of non-existing include directories
This patch fix the following build warnings:
CC [M] drivers/gpu/drm/amd/amdgpu/amdgpu_drv.o
cc1: warning: ../display/: No such file or directory [-Wmissing-include-dirs]
cc1: warning: ../display/include: No such file or directory [-Wmissing-include-dirs]
CC [M] drivers/gpu/drm/amd/amdgpu/amdgpu_device.o
cc1: warning: ../display/: No such file or directory [-Wmissing-include-dirs]
cc1: warning: ../display/include: No such file or directory [-Wmissing-include-dirs]
[...]
This warning is shown for each file in amdgpu directory, so it spams a lot.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Corentin Labbe [Thu, 22 Feb 2018 08:21:48 +0000 (08:21 +0000)]
drm/amd: remove inclusion of non-existing scheduler directory
The scheduler directory was removed via commit
1b1f42d8fde4 ("drm: move amd_gpu_scheduler into common location")
Remove it from include path.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ben Crocker [Thu, 22 Feb 2018 22:52:19 +0000 (17:52 -0500)]
drm/radeon: insist on 32-bit DMA for Cedar on PPC64/PPC64LE
In radeon_device_init, set the need_dma32 flag for Cedar chips
(e.g. FirePro 2270). This fixes, or at least works around, a bug
on PowerPC exposed by last year's commits
8e3f1b1d8255105f31556aacf8aeb6071b00d469 (Russell Currey)
and
253fd51e2f533552ae35a0c661705da6c4842c1b (Alistair Popple)
which enabled the 64-bit DMA iommu bypass.
This caused the device to freeze, in some cases unrecoverably, and is
the subject of several bug reports internal to Red Hat.
Signed-off-by: Ben Crocker <bcrocker@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Thierry Reding [Tue, 20 Feb 2018 10:44:50 +0000 (11:44 +0100)]
drm/amdgpu: Remove duplicate setting of ->need_swiotlb
There's no need to set this before the number of DMA bits has been
properly determined.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 22 Feb 2018 09:45:11 +0000 (17:45 +0800)]
drm/amd/pp: Add a pp feature mask bit for AutoWattman feature
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 22 Feb 2018 09:39:22 +0000 (17:39 +0800)]
drm/amdgpu: Change default value of module parameter amdgpu_pp_feature_mask
Currently all pp features are enabled by default except
OVERDRIVE
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Thu, 22 Feb 2018 17:00:35 +0000 (12:00 -0500)]
drm/amd/powerplay: fix thermal interrupts on vega10
a bug in programming thermal interrupt register masks out
interrupts and driver cannot receive interrupts. Setting
0 to mask bits will fix it.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 8 Feb 2018 07:57:10 +0000 (15:57 +0800)]
drm/amdgpu: Add query vram width in CGS query system info
powerplay need vram width to set default mclk optimization
settings(uphyst/downhyst/activity threshold)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 22 Feb 2018 07:35:11 +0000 (08:35 +0100)]
drm/amdgpu: use the TTM dummy page instead of allocating one
We have a global dummy page in TTM, use that one instead of allocating a
new one.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Fri, 9 Feb 2018 08:47:53 +0000 (16:47 +0800)]
drm/amd/pp: Fix bug that dpm level was not really locked
Lock the dpm levels when we use SW method to modify
the dpm tables directly to avoid a possible race
with the smu.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Sun, 11 Feb 2018 04:38:58 +0000 (12:38 +0800)]
drm/amd/pp: Fix error handling when smu return failed on Vega10.
Clamp the clock index to a valid range when reading it back
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roger He [Tue, 6 Feb 2018 07:00:06 +0000 (15:00 +0800)]
drm/ttm: set TTM_OPT_FLAG_FORCE_ALLOC in ttm_bo_force_list_clean
Because ttm_bo_force_list_clean() is only called on two occasions:
1. By ttm_bo_evict_mm() during suspend.
2. By ttm_bo_clean_mm() when the driver unloads.
On both cases we absolutely don't want any memory allocation failure.
Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roger He [Wed, 17 Jan 2018 07:07:23 +0000 (15:07 +0800)]
drm/ttm: add bit flag TTM_OPT_FLAG_FORCE_ALLOC
set TTM_OPT_FLAG_FORCE_ALLOC when we are servicing for page
fault routine.
for ttm_mem_global_reserve if in page fault routine, allow the gtt
pages reservation always. because page fault routing already grabbed
system memory and the allowance of this exception is harmless.
Otherwise, it will trigger OOM killer.
will be used later.
v2: set the FORCE_ALLOC always
v3: minor refine
Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roger He [Tue, 6 Feb 2018 03:22:57 +0000 (11:22 +0800)]
drm/ttm: use bit flag to replace allow_reserved_eviction in ttm_operation_ctx
for saving memory and more bit flag can be used in future
Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Arnd Bergmann [Fri, 16 Feb 2018 15:26:57 +0000 (16:26 +0100)]
radeon: hide pointless #warning when compile testing
In randconfig testing, we sometimes get this warning:
drivers/gpu/drm/radeon/radeon_object.c: In function 'radeon_bo_create':
drivers/gpu/drm/radeon/radeon_object.c:242:2: error: #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance thanks to write-combining [-Werror=cpp]
#warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance \
This is rather annoying since almost all other code produces no build-time
output unless we have found a real bug. We already fixed this in the
amdgpu driver in commit
31bb90f1cd08 ("drm/amdgpu: shut up #warning for
compile testing") by adding a CONFIG_COMPILE_TEST check last year and
agreed to do the same here, but both Michel and I then forgot about it
until I came across the issue again now.
For stable kernels, as this is one of very few remaining randconfig
warnings in 4.14.
Cc: stable@vger.kernel.org
Link: https://patchwork.kernel.org/patch/9550009/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 1 Feb 2018 13:52:50 +0000 (14:52 +0100)]
drm/ttm: set page mapping during allocation
To aid debugging set the page mapping during allocation instead of
during VM faults.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 15 Feb 2018 13:40:30 +0000 (08:40 -0500)]
Revert "drm/radeon/pm: autoswitch power state when in balanced mode"
This reverts commit
1c331f75aa6ccbf64ebcc5a019183e617c9d818a.
Breaks resume on some systems.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=100759
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Christian König [Fri, 16 Feb 2018 09:08:24 +0000 (10:08 +0100)]
drm/radeon: use drm_gem_private_object_init
We use our own backing store and don't need the shmem file.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 16 Feb 2018 08:52:51 +0000 (09:52 +0100)]
drm/amdgpu: use drm_gem_private_object_init
We use our own backing store and don't need the shmem file.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 19 Feb 2018 10:29:35 +0000 (11:29 +0100)]
drm/amdgpu: mitigate workaround for i915
To be able to use DRI_PRIME with amdgpu and i915 we add all our fences
only as exclusive ones.
Disable that behavior when sharing between amdgpu itself cause it
hinders concurrent execution.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 16 Feb 2018 12:16:11 +0000 (13:16 +0100)]
drm/amdgpu: implement amdgpu_gem_map_(attach/detach)
Instead of the pin/unpin callback implement the attach/detach ones.
Functional identical, but allows us access to the attachment.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 13 Feb 2018 19:37:36 +0000 (14:37 -0500)]
drm/amdgpu/powerplay/smu7: drop refresh rate checks for mclk switching
The logic has moved to cgs. mclk switching with DC at higher refresh
rates should work.
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Alex Deucher [Tue, 13 Feb 2018 19:33:51 +0000 (14:33 -0500)]
drm/amdgpu/cgs: add refresh rate checking to non-DC display code
Clamp the vblank period to 0 if the refresh rate is larger than
120 hz for non-DC. This allows us to remove the refresh rate
checks from powerplay for mclk switching.
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 13 Feb 2018 19:26:54 +0000 (14:26 -0500)]
drm/amd/powerplay/smu7: allow mclk switching with no displays
If there are no displays attached, there is no reason to disable
mclk switching.
Fixes mclks getting set to high when there are no displays attached.
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Tue, 13 Feb 2018 19:25:11 +0000 (14:25 -0500)]
drm/amd/powerplay/vega10: allow mclk switching with no displays
If there are no displays attached, there is no reason to disable
mclk switching.
Fixes mclks getting set to high when there are no displays attached.
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Tue, 13 Feb 2018 19:22:46 +0000 (14:22 -0500)]
drm/amd/powerplay: use PP_CAP macro for disable_mclk_switching_for_frame_lock
Rather than open coding it.
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Corentin Labbe [Wed, 14 Feb 2018 14:46:17 +0000 (14:46 +0000)]
drm/amd/powerplay: remove unused headers
All thoses headers are not used by any source files.
Lets just remove them.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gustavo A. R. Silva [Thu, 15 Feb 2018 05:20:00 +0000 (23:20 -0600)]
drm/amdgpu_gem: fix error handling path in amdgpu_gem_va_update_vm
Currently, if amdgpu_vm_bo_update() fails, the returned error
is being ignored.
Fix this by properly checking _r_ after calling amdgpu_vm_bo_update.
Also, remove redundant code just before label _error_.
Addresses-Coverity-ID:
1464280 ("Unused value")
Fixes:
0abc6878fc2d ("drm/amdgpu: update VM PDs after the PTs")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 5 Feb 2018 16:38:01 +0000 (17:38 +0100)]
drm/amdgpu: update the PASID mapping only on demand
Updating the PASID is rather heavyweight and shouldn't be done all the
time.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Sun, 4 Feb 2018 09:32:35 +0000 (10:32 +0100)]
drm/amdgpu: separate PASID mapping from VM flush v2
Stuffing the PASID mapping into the VM flush isn't flexible enough since
the PASID mapping changes not as often as we need a VM flush.
v2: add missing use of gmc_v7_0_emit_pasid_mapping
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Fri, 9 Feb 2018 17:51:01 +0000 (12:51 -0500)]
drm/amd/display: Fix increment when sampling OTF in DCE
Previously, the number of software segmets per region was reduced to 16.
This needs to be reflected in the sampling distance (increment) used when
translating to the hardware format.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vitaly Prosyak [Tue, 6 Feb 2018 21:06:23 +0000 (15:06 -0600)]
drm/amd/display: De PQ implementation
Some refactoring and optimizations in color module.
Added de gamma 2.2 & 2.4, also re gamma 2.2.
Added interface for diagnostic for de gamma & de pq.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Mon, 5 Feb 2018 23:41:45 +0000 (18:41 -0500)]
drm/amd/display: Remove unused dm_pp_ interfaces
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Yang [Tue, 6 Feb 2018 22:28:46 +0000 (17:28 -0500)]
drm/amd/display: Add logging for aux DPCD access
Add basic logging for DPCD access. Does not print
by default.
Currently only prints first byte of the data accessed.
Technical debt: Need to make it so that the entire
data block accessed is printed. Also need to log
address space that's not DPCD.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tao [Thu, 8 Feb 2018 21:04:25 +0000 (16:04 -0500)]
drm/amd/display: Set vsc pack revision when DPCD revision is >= 1.2
Brightness couldn't change when booting up in DC mode.
It was because "psr_enabled" flag was not set to true before
setting vsc packet revision, causing packet rev setup was skipped.
Now instead of checking the psr flag, it checks if the DPCD_REV >= 1.2
and set the vsc packet revision.
Signed-off-by: Tao <xtao@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Thu, 8 Feb 2018 04:25:43 +0000 (23:25 -0500)]
drm/amd/display: provide an interface to query firmware version
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Thu, 1 Feb 2018 16:29:58 +0000 (11:29 -0500)]
drm/amd/display: Add missing Vega defines to dal_asic_id
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Yang [Thu, 8 Feb 2018 19:05:14 +0000 (14:05 -0500)]
drm/amd/display: Treat bad EDID as no EDID
We have an mst dock firmware that will emulate an EDID with bad
checksum.
v2: Tread -> Treat
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ken Chalmers [Wed, 7 Feb 2018 19:58:53 +0000 (14:58 -0500)]
drm/amd/display: Remove duplicate entries from BIOS function table
Identical to the two entries above them.
Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Tue, 6 Feb 2018 23:47:26 +0000 (18:47 -0500)]
drm/amd/display: Make FBC work without fbdev emulation
Previously, FBC dynamic allocation relied on connector modes
populated during dm init. This is only the case if
DRM_FBDEV_EMULATION config flag is enabled.
Moving fbc allocation from dm_late_init() to
amdgpu_dm_connector_get_modes() where actual modes init happens.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Shirish Shankarappa <Shirish.S@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Barberiz [Tue, 6 Feb 2018 17:25:17 +0000 (12:25 -0500)]
drm/amd/display: Remove delay on disconnect patch
HDMI HPD's generic solution makes the monitor
patch code unnecessary so anything related has
been removed.
Signed-off-by: John Barberiz <jbarberi@amd.com>
Reviewed-by: John Barberiz <jbarberi@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Tue, 6 Feb 2018 15:20:46 +0000 (10:20 -0500)]
drm/amd/display: Skip 2 frames when first reading CRC
Skipping the first frame will prevent uncoooked values most of the time.
However, in some unlikely cases, the second frame will be uncooked as
well.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Mon, 5 Feb 2018 21:11:19 +0000 (16:11 -0500)]
drm/amd/display: Expose DCE110 CRC functions for DCE8
Implement CRC for DCE8. Registers remain the same, so call DCE110 code
directly.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Tue, 6 Feb 2018 21:35:21 +0000 (16:35 -0500)]
drm/amd/display: Rework DCE transform bit depth reduction programming.
Clear up the logic, and enable programming truncation as a bit reduction
mode.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Tue, 23 Jan 2018 22:43:37 +0000 (17:43 -0500)]
drm/amd/display: When enabling CRC, disable dither & enable truncation
When user-mode is using 8bpc, the hardware represents it internally
using a higher bit depth. This causes problems when comparing CRCs for
color managment tests.
We need to disable dithering as well, since it makes CRC values
non-deterministic.
It's easy to see why dithering needs to be disabled, The reason why
truncation also needs to be enabled is better described with an example.
Consider the folowing which tests the color transform matrix (CTM):
Expected CRC = FB_A -> Degamma (Bypassed) -> CTM (Bypassed)
|
v
Obtain CRC <- Regamma(Bypassed)
Actual CRC = FB_B -> Degamma (Bypassed) -> CTM (0.5*Identity)
|
v
Obtain CRC <- Regamma(Bypassed)
FB_A contains a solid red color at half intensity (127 @ 8bpc)
FB_B contains a solid red color at full intensity (255 @ 8bpc)
We expect that Expected CRC = Actual CRC, but that's not the case. When
the CTM is applied, the output is at half intensity, but also at a
higher bit depth within hardware. i.e. 255/2 = 127.5: not representable
in 8bpc, but can be at 10bpc. This causes the two CRC's to be different.
The solution is to truncate the output bit depth to the same as input
when enabling CRC capture. Since Linux only supports 8bpc, hard code
that for now.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Tue, 6 Feb 2018 14:50:49 +0000 (09:50 -0500)]
drm/amd/display: Expose dither setting functionality to Linux
We will need this to disable dither for CRC capture.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Tue, 30 Jan 2018 16:14:27 +0000 (11:14 -0500)]
drm/amd/display: Refactor max color lut entries into a macro.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Fri, 2 Feb 2018 15:18:56 +0000 (10:18 -0500)]
drm/amd/display: Hookup color management functions
Hookup new color management functions into amdgpu_dm:
- Notify DRM that we support CRTC color management during CRTC init
- Call color management functions within atomic check to update dc
states in preparation for a commit
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Fri, 2 Feb 2018 15:18:05 +0000 (10:18 -0500)]
drm/amd/display: Implement color management
Implement color management functionalities within amdgpu_dm_color, and
expose functions within amdgpu_dm.h.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Mon, 5 Feb 2018 19:29:57 +0000 (14:29 -0500)]
drm/amd/display: Add color module's gamma helpers to Linux build
Also guard includes that we don't need.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Fri, 2 Feb 2018 14:46:41 +0000 (09:46 -0500)]
drm/amd/display: Use hardware max low point when sampling OTF
The MAX_LOW_POINT macro should reflect the maximum low point within
hardware. Otherwise, sampling for the hardware points from the output
transfer function (OTF) will be incorrect.
Also, fix usage of MAX_LOW_POINT accordingly.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Wed, 24 Jan 2018 16:23:28 +0000 (11:23 -0500)]
drm/amd/display: Make couple functions in DCE80 TG static
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Wed, 24 Jan 2018 16:16:49 +0000 (11:16 -0500)]
drm/amd/display: Re-use DCE100 display_power_gating for DCE80
Both functions are the same
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Wed, 24 Jan 2018 15:47:37 +0000 (10:47 -0500)]
drm/amd/display: Remove unused DCE80 compressor
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yongqiang Sun [Fri, 2 Feb 2018 22:35:00 +0000 (17:35 -0500)]
drm/amd/display: Keep eDP stream enabled during boot.
This path fixed specific eDP panel cold boot black screen
due to unnecessary enable link.
Change:
In case of boot up with eDP, if OS is going to set mode
on eDP, keep eDP light up, do not disable and reset corresponding
HW.
This change may affect dce asics and S3/S4 Resume with multi-monitor.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Cheng [Fri, 2 Feb 2018 06:16:47 +0000 (01:16 -0500)]
drm/amd/display: dal 3.1.34
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dmytro Laktyushkin [Mon, 29 Jan 2018 21:34:16 +0000 (16:34 -0500)]
drm/amd/display: disable seamless vp adjustment for mirrored surface
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Tsai [Thu, 1 Feb 2018 12:03:17 +0000 (20:03 +0800)]
drm/amd/display: add monitor patch for delay after DP receive power up
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Tue, 30 Jan 2018 19:58:42 +0000 (14:58 -0500)]
drm/amd/display: Change blackout time to 0 on CZ/ST
These should only be non-0 if big hammer w/a is implemented. Currently
DC doesn't implement it, so leave them 0.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Thu, 1 Feb 2018 20:16:20 +0000 (15:16 -0500)]
drm/amd/display: add force_trigger even to static screen control
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Cheng [Thu, 1 Feb 2018 20:32:55 +0000 (15:32 -0500)]
drm/amd/display: dal 3.1.33
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Wed, 31 Jan 2018 21:45:26 +0000 (16:45 -0500)]
drm/amd/display: boot up/S4 fix mainlink off before BL.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hersen Wu [Tue, 30 Jan 2018 16:46:16 +0000 (11:46 -0500)]
drm/amd/display: VGA black screen from s3 when attached to hook
[Description] For MST, DC already notify MST sink for MST mode, DC stll
check DP SINK DPCD register to see if MST enabled. DP RX firmware may
not handle this properly.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Barberiz [Fri, 26 Jan 2018 22:39:19 +0000 (17:39 -0500)]
drm/amd/display: Rearchitecture HDMI HPD
- Disabled HPD filter and used HPD software timer instead
- Allows DM to disable HPD filtering
Signed-off-by: John Barberiz <jbarberi@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Fri, 9 Feb 2018 17:15:45 +0000 (12:15 -0500)]
drm/amdgpu: Fix potential uninitialized use of 'idle' in amdgpu_ids.c
v2: Use NULL and reverse christmas tree ordering
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mikita Lipski [Sat, 3 Feb 2018 20:19:20 +0000 (15:19 -0500)]
drm/amdgpu: Unify the dm resume calls into one
amdgpu_dm_display_resume is now called from dm_resume to
unify DAL resume call into a single function call
There is no more need to separately call 2 resume functions
for DM.
Initially they were separated to resume display state after
cursor is pinned. But because there is no longer any corruption
with the cursor - the calls can be merged into one function hook.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mikita Lipski [Fri, 19 Jan 2018 16:21:04 +0000 (11:21 -0500)]
drm/amdgpu: Add a missing lock for drm_mm_takedown
Inside amdgpu_gtt_mgr_fini add a missing lock to maintain
locking balance
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 7 Feb 2018 19:48:22 +0000 (20:48 +0100)]
drm/amdgpu: cleanup VCN IB generation
Start to use amdgpu_bo_create_reserved v2.
v2:
Fix missing pointer init to NULL.
Remove extra new lines.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Tested-and-Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 7 Feb 2018 19:48:21 +0000 (20:48 +0100)]
drm/amdgpu: fix and cleanup UVD IB generation
We didn't synced the BO after validating it. Also sart to use
amdgpu_bo_create_reserved to simplify things.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Thu, 8 Feb 2018 21:46:30 +0000 (16:46 -0500)]
drm/amd/display: Remove unused CFLAGS entry in DML Makefile
Missed that with a previous change that removed unused files.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 1 Feb 2018 13:41:37 +0000 (14:41 +0100)]
drm/radeon: remove extra TT unpopulated check
The subsystem should check that, not the driver.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 1 Feb 2018 13:40:35 +0000 (14:40 +0100)]
drm/amdgpu: remove extra TT unpopulated check
The subsystem should check that, not the driver.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 1 Feb 2018 13:39:29 +0000 (14:39 +0100)]
drm/ttm: add ttm_tt_populate wrapper
Stop calling the driver callback directly.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Matthias Kaehlcke [Thu, 8 Feb 2018 20:53:16 +0000 (12:53 -0800)]
amdgpu/dc/calcs: Support clang option for stack alignment
calcs uses the compiler option -mpreferred-stack-boundary=4 to configure
a stack alignment of 16 bytes. Clang uses the option -mstack-alignment
instead, which expects as parameter the alignment in bytes, and not a
power of two like -mpreferred-stack-boundary.
Probe for both compiler options and use the correct one, similar to
what is done in arch/x86/Makefile.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Matthias Kaehlcke [Thu, 8 Feb 2018 20:53:15 +0000 (12:53 -0800)]
amdgpu/dc/dml: Support clang option for stack alignment
DML uses the compiler option -mpreferred-stack-boundary=4 to configure
a stack alignment of 16 bytes. Clang uses the option -mstack-alignment
instead, which expects as parameter the alignment in bytes, and not a
power of two like -mpreferred-stack-boundary.
Probe for both compiler options and use the correct one, similar to
what is done in arch/x86/Makefile.
Reported-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Matthias Kaehlcke [Thu, 8 Feb 2018 20:53:14 +0000 (12:53 -0800)]
amdgpu/dc/calcs: Consolidate redundant CFLAGS
Use a variable for common CFLAGS instead of specifying the same flags
for every source file.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Matthias Kaehlcke [Thu, 8 Feb 2018 20:53:13 +0000 (12:53 -0800)]
amdgpu/dc/dml: Consolidate redundant CFLAGS
Use a variable for common CFLAGS instead of specifying the same flags
for every source file.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shaoyun Liu [Thu, 1 Feb 2018 23:13:23 +0000 (18:13 -0500)]
drm/amdgpu: Add place holder for soc15 asic init on emulation
Add common smu_soc_asic_init function to emulate the sillicon post sequence
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shaoyun Liu [Wed, 7 Feb 2018 19:43:13 +0000 (14:43 -0500)]
drm/amdgpu: Double the timeout count on emulation mode
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shaoyun Liu [Tue, 6 Feb 2018 22:29:35 +0000 (17:29 -0500)]
drm/amdgpu: Avoid get vram info from atom bios on emulation mode
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shaoyun Liu [Mon, 5 Feb 2018 21:41:33 +0000 (16:41 -0500)]
drm/amdgpu: Fix none-powerplay issue when load driver on emulation mode
On emulation mode , driver will be loaded with powerplay disabled
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>