OSDN Git Service
Alexandre Belloni [Tue, 30 Apr 2019 09:32:11 +0000 (11:32 +0200)]
rtc: digicolor: use .set_time
Use .set_time instead of the deprecated .set_mmss.
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 30 Apr 2019 09:32:10 +0000 (11:32 +0200)]
rtc: digicolor: set range
While the range of REFERENCE + TIME is actually 33 bits, the counter
itself (TIME) is a 32-bits seconds counter.
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 30 Apr 2019 09:32:09 +0000 (11:32 +0200)]
rtc: digicolor: fix possible race condition
The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.
Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
struct before requesting the IRQ.
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 30 Apr 2019 09:28:21 +0000 (11:28 +0200)]
rtc: jz4740: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 30 Apr 2019 09:28:20 +0000 (11:28 +0200)]
rtc: jz4740: rework invalid time detection
The scratchpad register is used to detect an invalid time when power to the
RTC has been lost. Instead of deleting that precious information and set
the time to the UNIX epoch, forward it to userspace.
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 30 Apr 2019 09:28:19 +0000 (11:28 +0200)]
rtc: jz4740: use dev_pm_set_wake_irq() to simplify code
Use dev_pm_set_wake_irq() to set the RTC as a wakeup source for suspend.
This allows to remove the whole dev_pm_ops structure.
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 30 Apr 2019 09:28:18 +0000 (11:28 +0200)]
rtc: jz4740: use .set_time
Use .set_time instead of the deprecated .set_mmss.
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 30 Apr 2019 09:28:17 +0000 (11:28 +0200)]
rtc: jz4740: remove useless check
rtc_time64_to_tm always returns a valid tm, it is not necessary to validate
it.
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 30 Apr 2019 09:28:16 +0000 (11:28 +0200)]
rtc: jz4740: switch to rtc_time64_to_tm/rtc_tm_to_time64
Call the 64bit versions of rtc_tm time conversion now that the range is
enforced by the core.
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 30 Apr 2019 09:28:15 +0000 (11:28 +0200)]
rtc: jz4740: set range
RTC_SEC is a 32-bit seconds counter.
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Sven Van Asbroeck [Fri, 26 Apr 2019 18:36:35 +0000 (14:36 -0400)]
rtc: 88pm860x: prevent use-after-free on device remove
The device's remove() attempts to shut down the delayed_work scheduled
on the kernel-global workqueue by calling flush_scheduled_work().
Unfortunately, flush_scheduled_work() does not prevent the delayed_work
from re-scheduling itself. The delayed_work might run after the device
has been removed, and touch the already de-allocated info structure.
This is a potential use-after-free.
Fix by calling cancel_delayed_work_sync() during remove(): this ensures
that the delayed work is properly cancelled, is no longer running, and
is not able to re-schedule itself.
This issue was detected with the help of Coccinelle.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Kefeng Wang [Tue, 23 Apr 2019 07:50:16 +0000 (15:50 +0800)]
rtc: Use dev_get_drvdata()
Using dev_get_drvdata directly.
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-rtc@vger.kernel.org
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 16 Apr 2019 08:34:32 +0000 (10:34 +0200)]
rtc: imxdi: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 16 Apr 2019 08:34:31 +0000 (10:34 +0200)]
rtc: imxdi: remove unnecessary check
The RTC core already ensures the alarm is set to a time in the future, it
is not necessary to check again in the driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 16 Apr 2019 08:34:30 +0000 (10:34 +0200)]
rtc: imxdi: use .set_time
Use .set_time instead of the deprecated .set_mmss.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 16 Apr 2019 08:34:29 +0000 (10:34 +0200)]
rtc: imxdi: switch to rtc_time64_to_tm/rtc_tm_to_time64
Call the 64bit versions of rtc_tm time conversion now that the range is
enforced by the core.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 16 Apr 2019 08:34:28 +0000 (10:34 +0200)]
rtc: imxdi: set range
The RTC Time Counter MSB Register contains the 32 most significant bits
(47:16) of the 47-bit RTC Time Counter. Clocked by a 32.768 KHz clock, this
register is effectively a 32-bit seconds counter.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 16 Apr 2019 08:30:45 +0000 (10:30 +0200)]
rtc: mxc: use .set_time
Use .set_time instead of the deprecated .set_mmss64.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 16 Apr 2019 08:30:44 +0000 (10:30 +0200)]
rtc: mxc: set range
Let the core handle the range, and in particular the imx1 offsetting. This
has the benefit of extending the range of the RTC further than 365 days and
making .read_time useful again on imx1.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 16 Apr 2019 08:30:43 +0000 (10:30 +0200)]
rtc: mxc: fix possible race condition
The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.
Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
struct before requesting the IRQ.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fabien Dessenne [Wed, 24 Apr 2019 12:26:48 +0000 (14:26 +0200)]
rtc: stm32: manage the get_irq probe defer case
Manage the -EPROBE_DEFER error case for the wake IRQ.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Daniel Gomez [Mon, 22 Apr 2019 19:08:52 +0000 (21:08 +0200)]
rtc: rx6110: declare missing of table
Add missing <of_device_id> table for SPI driver relying on SPI
device match since compatible is in a DT binding or in a DTS.
Before this patch:
modinfo drivers/rtc/rtc-rx6110.ko | grep alias
alias: spi:rx6110
After this patch:
modinfo drivers/rtc/rtc-rx6110.ko | grep alias
alias: spi:rx6110
alias: of:N*T*Cepson,rx6110C*
alias: of:N*T*Cepson,rx6110
Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 11:54:44 +0000 (13:54 +0200)]
rtc: wm831x: use .set_time
Use .set_time instead of the deprecated .set_mmss.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Fri, 19 Apr 2019 08:25:01 +0000 (10:25 +0200)]
rtc: ds2404: simplify .probe and remove .remove
Use devm_add_action_or_reset to simplify .probe and remove .remove
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Fri, 19 Apr 2019 08:25:00 +0000 (10:25 +0200)]
rtc: ds2404: remove ds2404_chip_ops
There is only one ds2404_chip_ops struct that is implemented, remove the
unnecessary indirection.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Fri, 19 Apr 2019 08:24:59 +0000 (10:24 +0200)]
rtc: ds2404: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Fri, 19 Apr 2019 08:24:58 +0000 (10:24 +0200)]
rtc: ds2404: use .set_time
Use .set_time instead of the deprecated .set_mmss.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Fri, 19 Apr 2019 08:24:57 +0000 (10:24 +0200)]
rtc: ds2404: switch to rtc_time64_to_tm
Call the 64bit version of rtc_time_to_tm now that the range is enforced by
the core.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Fri, 19 Apr 2019 08:24:56 +0000 (10:24 +0200)]
rtc: ds2404: set range
The real-time clock is a 5-byte binary counter. It is incremented 256 times
per second. The least significant byte is a count of fractional seconds.
The upper four bytes are a count of seconds. The realtime clock can
accumulate 136 years of seconds before rolling over.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Fri, 19 Apr 2019 08:00:05 +0000 (10:00 +0200)]
rtc: ep93xx: fix checkpatch issues
Fix sysfs attribute declaration as suggested by checkpatch.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Fri, 19 Apr 2019 08:00:04 +0000 (10:00 +0200)]
rtc: ep93xx: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Fri, 19 Apr 2019 08:00:03 +0000 (10:00 +0200)]
rtc: ep93xx: use .set_time
Use .set_time instead of the deprecated .set_mmss.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Fri, 19 Apr 2019 08:00:02 +0000 (10:00 +0200)]
rtc: ep93xx: switch to rtc_time64_to_tm
Call the 64bit version of rtc_time_to_tm now that the range is enforced by
the core.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Fri, 19 Apr 2019 08:00:01 +0000 (10:00 +0200)]
rtc: ep93xx: set range
The ep93xx RTC is a 32-bit seconds counter.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Fri, 19 Apr 2019 08:00:00 +0000 (10:00 +0200)]
rtc: ep93xx: use rtc_add_group
Use rtc_add_group to add the sysfs group in a race free manner.
This has the side effect of moving the files to their proper location.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Fri, 19 Apr 2019 07:59:59 +0000 (09:59 +0200)]
rtc: ep93xx: convert to devm_rtc_allocate_device
This allows further improvement of the driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Fri, 19 Apr 2019 07:59:58 +0000 (09:59 +0200)]
rtc: ep93xx: stop setting platform_data
Since commit
28dc5f803899 ("drivers/rtc/rtc-ep93xx.c: use
dev_get_platdata()"), platform_data is not used directly, it is not
necessary to set it anymore.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Han Nandor [Tue, 16 Apr 2019 10:57:54 +0000 (10:57 +0000)]
rtc: ds3232: get SRAM access using NVMEM Framework
DS3232 RTC has 236 bytes of persistent memory.
Add RTC SRAM read and write access using
the NVMEM Framework.
Signed-off-by: Han Nandor <nandor.han@vaisala.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 16 Apr 2019 08:33:08 +0000 (10:33 +0200)]
rtc: mc13xxx: fix style issue
Use unsigned int instead of unsigned.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 16 Apr 2019 08:33:07 +0000 (10:33 +0200)]
rtc: mc13xxx: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 16 Apr 2019 08:33:06 +0000 (10:33 +0200)]
rtc: mc13xxx: use .set_time
Use .set_time instead of the deprecated .set_mmss64.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 16 Apr 2019 08:33:05 +0000 (10:33 +0200)]
rtc: mc13xxx: set range
All supported PMICs have a 15 bits days counter and hours, minutes, seconds
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Thomas Bogendoerfer [Tue, 16 Apr 2019 09:34:04 +0000 (11:34 +0200)]
rtc: ds1685: use threaded interrupt
Handling of extended interrupts (kickstart, wake-up, ram-clear) was
moved off to a work queue, but the interrupts aren't acknowledged
in the interrupt handler. This leads to a deadlock, if driver
is used with interrupts. To fix this we use a threaded interrupt, get rid
of the work queue and do locking with just the rtc mutex lock.
Fixes:
aaaf5fbf56f1 ("rtc: add driver for DS1685 family of real time clocks")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Thomas Bogendoerfer [Tue, 16 Apr 2019 09:34:03 +0000 (11:34 +0200)]
rtc: ds1685: remove dead code
ds1685_rtc_begin_ctrl_access/ds1685_rtc_end_ctrl_access aren't used,
so get rid of it.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Thomas Bogendoerfer [Thu, 11 Apr 2019 14:33:21 +0000 (16:33 +0200)]
rtc: ds1685: fix crash caused by referencing wrong device struct
sysfs entries added by rtc_add_group are called with the rtc device
as argument and not the underlying device. Fixed by using the dev->parent
Fixes:
cfb74916e2ec ("rtc: ds1685: use rtc_add_group")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 9 Apr 2019 10:16:31 +0000 (12:16 +0200)]
rtc: lpc32xx: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 9 Apr 2019 10:16:30 +0000 (12:16 +0200)]
rtc: lpc32xx: use .set_time
Use .set_time instead of the deprecated .set_mmss.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 9 Apr 2019 10:16:29 +0000 (12:16 +0200)]
rtc: lpc32xx: switch to rtc_time64_to_tm/rtc_tm_to_time64
Call the 64bit versions of rtc_tm time conversion now that the range is
enforced by the core.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 9 Apr 2019 10:16:28 +0000 (12:16 +0200)]
rtc: lpc32xx: simplify IRQ setup
Move the optional IRQ setup to a single location.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 9 Apr 2019 10:16:27 +0000 (12:16 +0200)]
rtc: lpc32xx: set range
The LPC32xx RTC is a 32bit second counter.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 9 Apr 2019 10:16:26 +0000 (12:16 +0200)]
rtc: lpc32xx: convert to devm_rtc_allocate_device
This allows further improvement of the driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Anson Huang [Thu, 11 Apr 2019 02:19:48 +0000 (02:19 +0000)]
rtc: mxc_v2: use dev_pm_set_wake_irq() to simplify code
With calling dev_pm_set_wake_irq() to set MXC_V2 RTC as wakeup source
for suspend, generic wake irq mechanism will automatically enable
it as wakeup source when suspend, then the suspend/resume callback
which are ONLY for enabling/disabling irq wake can be removed, it
simplifies the code.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Anson Huang [Thu, 11 Apr 2019 02:06:04 +0000 (02:06 +0000)]
rtc: mxc: use dev_pm_set_wake_irq() to simplify code
With calling dev_pm_set_wake_irq() to set MXC RTC as wakeup source
for suspend, generic wake irq mechanism will automatically enable
it as wakeup source when suspend, then the suspend/resume callback
which are ONLY for enabling/disabling irq wake can be removed, it
simplifies the code.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Andy Shevchenko [Wed, 10 Apr 2019 14:05:59 +0000 (17:05 +0300)]
rtc: rx8025: Fix a parameter to %ptR in rx8025_read_alarm()
The commit
1921cab11723 ("rtc: rx8025: Switch to use %ptR") converted
the driver to use new %p extension, but actually used wrong type of
the parameter in one case.
Fix a parameter to %ptR in rx8025_read_alarm().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
YueHaibing [Wed, 10 Apr 2019 13:43:36 +0000 (21:43 +0800)]
rtc: sirfsoc: Make sysrtc_regmap_config static
Fix sparse warning:
drivers/rtc/rtc-sirfsoc.c:282:28: warning:
symbol 'sysrtc_regmap_config' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 9 Apr 2019 19:59:45 +0000 (21:59 +0200)]
rtc: ab3100: convert to SPDX identifier
Use SPDX-License-Identifier instead of the custom license line.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 9 Apr 2019 19:59:44 +0000 (21:59 +0200)]
rtc: ab3100: use .set_time
Use .set_time instead of the deprecated .set_mmss64.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 9 Apr 2019 19:59:43 +0000 (21:59 +0200)]
rtc: ab3100: set range
The ab3100 has a 48bit counter running at 65536 Hz (despite one of the
comment). The max value is then (2^48 - 1)/2^16 == 2^32 - 1.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Wed, 10 Apr 2019 20:56:04 +0000 (22:56 +0200)]
rtc: pcf85363: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Wed, 10 Apr 2019 20:56:03 +0000 (22:56 +0200)]
rtc: pcf85363: remove useless forward declaration
It is not necessary to forward declare pcf85363_driver as it is not used
before being declared.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Wed, 10 Apr 2019 20:56:02 +0000 (22:56 +0200)]
rtc: pcf85363: remove bogus i2c functionality check
regmap is abstracting the i2c functionalities the best it can, there is no
need to check.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Wed, 10 Apr 2019 20:56:01 +0000 (22:56 +0200)]
rtc: pcf85363: set range
This is a standard BCD RTC that will fail in 2100.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Wed, 10 Apr 2019 20:56:00 +0000 (22:56 +0200)]
rtc: pcf85363: remove unused struct pcf85363 member
pcf85363->dev is unused, remove it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:12:23 +0000 (23:12 +0200)]
rtc: stmp3xxx: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:12:22 +0000 (23:12 +0200)]
rtc: stmp3xxx: use .set_time
Use .set_time instead of the deprecated .set_mmss.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:12:21 +0000 (23:12 +0200)]
rtc: stmp3xxx: switch to rtc_time64_to_tm/rtc_tm_to_time64
Call the 64bit versions of rtc_tm time conversion now that the range is
enforced by the core.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:12:20 +0000 (23:12 +0200)]
rtc: stmp3xxx: set range
From the datasheet: "HW_RTC_SECONDS provides access to the 32-bit real-time
seconds counter."
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:16:46 +0000 (23:16 +0200)]
rtc: tegra: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:16:45 +0000 (23:16 +0200)]
rtc: tegra: switch to rtc_time64_to_tm/rtc_tm_to_time64
Call the 64bit versions of rtc_tm time conversion now that the range is
enforced by the core.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:16:44 +0000 (23:16 +0200)]
rtc: tegra: set range
The Tegra 20 RTC is a 32bit seconds counter (with an unused millisecond
counter).
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:10:27 +0000 (23:10 +0200)]
rtc: coh901331: convert to SPDX identifier
Use SPDX-License-Identifier instead of the custom license line.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:10:26 +0000 (23:10 +0200)]
rtc: coh901331: use .set_time
Use .set_time instead of the deprecated .set_mmss.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:10:25 +0000 (23:10 +0200)]
rtc: coh901331: switch to rtc_time64_to_tm/rtc_tm_to_time64
Call the 64bit versions of rtc_tm time conversion now that the range is
enforced by the core.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:10:24 +0000 (23:10 +0200)]
rtc: coh901331: set range
The COH 901 331 is a 32bit seconds counter.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:05:41 +0000 (23:05 +0200)]
rtc: ds1672: switch debug message to %ptR
Use %ptR to simplify debug message.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:05:40 +0000 (23:05 +0200)]
rtc: ds1672: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:05:39 +0000 (23:05 +0200)]
rtc: ds1672: use .set_time
Use .set_time instead of the deprecated .set_mmss.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:05:38 +0000 (23:05 +0200)]
rtc: ds1672: use rtc_time64_to_tm
Use the 64bit version of rtc_time_to_tm.rtc_time_to_tm.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:05:37 +0000 (23:05 +0200)]
rtc: ds1672: remove useless indirection
ds1672_get_datetime and ds1672_set_mmss are only used after casting dev
to an i2c_client. Remove that useless indirection.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:05:36 +0000 (23:05 +0200)]
rtc: ds1672: remove sysfs debug interface
Remove the control sysfs file as it is not documented, read only and was
only used to provide the oscillator state.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:05:35 +0000 (23:05 +0200)]
rtc: ds1672: move oscillator handling to .read_time
Return -EINVAL when trying to read an invalid time instead of just probe
because this is a useful information for userspace.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:05:34 +0000 (23:05 +0200)]
rtc: ds1672: set range
The ds1672 is a 32bit seconds counter.
Also remove erroneous comment claiming that epoch is set to 2000, it was
not.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 7 Apr 2019 21:30:12 +0000 (23:30 +0200)]
rtc: test: use .set_time
Use .set_time instead of the deprecated .set_mmss64.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Xuefeng Wang [Fri, 15 Feb 2019 03:13:59 +0000 (11:13 +0800)]
rtc: lib: check whether tm->tm_year in int32 range
When setting rtc alarm (RTC_WKALM_SET), the tm_year is not checked if it
is in suiteable range. Use INT_MAX - 1900 to check it.
UBSAN: Undefined behaviour in drivers/rtc/rtc-lib.c:119:30
signed integer overflow:
2147483647 + 1900 cannot be represented in type 'int'
CPU: 1 PID: 20994 Comm: syz-executor0 Not tainted 4.19.18-514.55.6.9.x86_64
+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1
04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xca/0x13e lib/dump_stack.c:113
ubsan_epilogue+0xe/0x81 lib/ubsan.c:159
handle_overflow+0x193/0x1e2 lib/ubsan.c:190
rtc_tm_to_time64+0x267/0x280 drivers/rtc/rtc-lib.c:119
rtc_tm_to_ktime+0x16/0x70 drivers/rtc/rtc-lib.c:129
rtc_set_alarm+0x1a9/0x2d0 drivers/rtc/interface.c:466
rtc_dev_ioctl+0x6db/0x810 drivers/rtc/rtc-dev.c:380
vfs_ioctl fs/ioctl.c:46 [inline]
do_vfs_ioctl+0x1a5/0x10b0 fs/ioctl.c:690
ksys_ioctl+0x89/0xa0 fs/ioctl.c:705
__do_sys_ioctl fs/ioctl.c:712 [inline]
__se_sys_ioctl fs/ioctl.c:710 [inline]
__x64_sys_ioctl+0x74/0xb0 fs/ioctl.c:710
do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462589
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89
f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08
0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8
64 89 01 48
RSP: 002b:
00007f5348896c58 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
RAX:
ffffffffffffffda RBX:
000000000072bf00 RCX:
0000000000462589
RDX:
0000000020000000 RSI:
000000004028700f RDI:
0000000000000003
RBP:
0000000000000003 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f53488976bc
R13:
00000000004bf67e R14:
00000000006f96e0 R15:
00000000ffffffff
==========================================================================
Signed-off-by: Xuefeng Wang <wxf.wang@hisilicon.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Wolfram Sang [Wed, 3 Apr 2019 15:19:52 +0000 (17:19 +0200)]
rtc: don't reference bogus function pointer in kdoc
The mentioned function pointer is long gone since early 2011. Remove the
reference in the comment and reword it slightly.
Fixes:
51ba60c5bb3b ("RTC: Cleanup rtc_class_ops->update_irq_enable()")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Tue, 2 Apr 2019 21:54:47 +0000 (23:54 +0200)]
rtc: remove unnecessary Kconfig dependencies
Remove the unused "depends on I2C" as the config options are already
guarded by if I2C.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Mon, 1 Apr 2019 16:08:16 +0000 (18:08 +0200)]
rtc: pcf85063: add RTC_VL_READ/RTC_VL_CLR support
Allow reading the oscillator status bit. Also allow clearing it even if
that makes little sense and can't be done in a race free way.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Mon, 1 Apr 2019 16:08:15 +0000 (18:08 +0200)]
rtc: pcf85063: add offset correction support
The PCF850363 has an offset correction with two modes:
With mode 0, the correction is triggered once every two hours and then
correction pulses are applied once per minute until the programmed
correction values have been implemented. This gives a step of 4.34 ppm.
With mode 1, the correction is triggered once every four minutes and then
correction pulses are applied once per second up to a maximum of 60 pulses.
When correction values greater than 60 pulses are used, additional
correction pulses are made in the 59 th second. This gives a step of 4.069
ppm.
Use the correction closest to the requested value.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Mon, 1 Apr 2019 16:08:14 +0000 (18:08 +0200)]
rtc: pcf85063: add nvram support
The pcf85063 has one byte of nvram.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Mon, 1 Apr 2019 16:08:13 +0000 (18:08 +0200)]
rtc: pcf85063: add Micro Crystal RV8263 support
The Micro Crystal RV8263 has the same IC as the pcf85063 but has an on
board crystal. This means that the CAP_SEL bit has to be cleared so the
correct capacitance is selected for the crystal.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Mon, 1 Apr 2019 16:08:12 +0000 (18:08 +0200)]
rtc: pcf85063: add alarm support
Add support for the alarms. The match on the weekday is not used as it it
not necessarily properly set.
The tested RTC shows a behaviour where setting an alarm on the second right
after an alarm that fired is not working, probably because of the circuit
that ensures an alarm only fires once. This is why uie_unsupported is set.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Mon, 1 Apr 2019 16:08:11 +0000 (18:08 +0200)]
rtc: pcf85063: differentiate pcf85063a and pcf85063tp
As stated in a comment pcf85063a and pcf85063tp don't have the same number
of registers. Especially, pcf85063tp doesn't have alarm support.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Mon, 1 Apr 2019 16:08:10 +0000 (18:08 +0200)]
rtc: pcf85063: switch to regmap
Switch to regmap to simplify register accesses and remove the need for
pcf85063_stop_clock/pcf85063_start_clock.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Mon, 1 Apr 2019 16:08:09 +0000 (18:08 +0200)]
rtc: pcf85063: set range
This is a standard BCD RTC that will fail in 2100.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Mon, 1 Apr 2019 16:08:08 +0000 (18:08 +0200)]
rtc: pcf85063: convert to devm_rtc_allocate_device
This allows further improvement of the driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Mon, 1 Apr 2019 16:08:07 +0000 (18:08 +0200)]
rtc: pcf85063: remove bogus i2c functionality check
Only smbus reads and write are done in the driver, plain i2c functionality
is not required.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Mon, 1 Apr 2019 16:33:49 +0000 (18:33 +0200)]
rtc: pcf85063: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Mon, 1 Apr 2019 16:08:05 +0000 (18:08 +0200)]
rtc: pcf85063: switch to probe_new
struct i2c_device_id argument of probe() is not used, so use probe_new()
instead.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Anson Huang [Mon, 1 Apr 2019 05:29:13 +0000 (05:29 +0000)]
rtc: snvs: use devm_platform_ioremap_resource() to simplify code
Use the new helper devm_platform_ioremap_resource() which wraps the
platform_get_resource() and devm_ioremap_resource() together, to
simplify the code.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Anson Huang [Mon, 1 Apr 2019 05:21:43 +0000 (05:21 +0000)]
rtc: mxc: use devm_platform_ioremap_resource() to simplify code
Use the new helper devm_platform_ioremap_resource() which wraps the
platform_get_resource() and devm_ioremap_resource() together, to
simplify the code.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>