OSDN Git Service
Max Reitz [Thu, 17 Oct 2019 13:31:45 +0000 (15:31 +0200)]
iotests/192: Create socket in $SOCK_DIR
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
20191017133155.5327-14-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Thu, 17 Oct 2019 13:31:44 +0000 (15:31 +0200)]
iotests/183: Create socket in $SOCK_DIR
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id:
20191017133155.5327-13-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Thu, 17 Oct 2019 13:31:43 +0000 (15:31 +0200)]
iotests/182: Create socket in $SOCK_DIR
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id:
20191017133155.5327-12-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Thu, 17 Oct 2019 13:31:42 +0000 (15:31 +0200)]
iotests/181: Create socket in $SOCK_DIR
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id:
20191017133155.5327-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Thu, 17 Oct 2019 13:31:41 +0000 (15:31 +0200)]
iotests/147: Create socket in $SOCK_DIR
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id:
20191017133155.5327-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Thu, 17 Oct 2019 13:31:40 +0000 (15:31 +0200)]
iotests/143: Create socket in $SOCK_DIR
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id:
20191017133155.5327-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Thu, 17 Oct 2019 13:31:39 +0000 (15:31 +0200)]
iotests/140: Create socket in $SOCK_DIR
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id:
20191017133155.5327-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Thu, 17 Oct 2019 13:31:38 +0000 (15:31 +0200)]
iotests/083: Create socket in $SOCK_DIR
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id:
20191017133155.5327-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Thu, 17 Oct 2019 13:31:37 +0000 (15:31 +0200)]
iotests: Let common.nbd create socket in $SOCK_DIR
In addition, drop the nbd_unix_socket assignment in 241 because it does
not really do anything.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
20191017133155.5327-6-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Thu, 17 Oct 2019 13:31:36 +0000 (15:31 +0200)]
iotests: Filter $SOCK_DIR
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
20191017133155.5327-5-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Thu, 17 Oct 2019 13:31:35 +0000 (15:31 +0200)]
iotests.py: Add @base_dir to FilePaths etc.
Specifying this optional parameter allows creating temporary files in
other directories than the test_dir; for example in sock_dir.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
20191017133155.5327-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Thu, 17 Oct 2019 13:31:34 +0000 (15:31 +0200)]
iotests.py: Store socket files in $SOCK_DIR
iotests.py itself does not store socket files, but machine.py and
qtest.py do. iotests.py needs to pass the respective path to them, and
they need to adhere to it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id:
20191017133155.5327-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Thu, 17 Oct 2019 13:31:33 +0000 (15:31 +0200)]
iotests: Introduce $SOCK_DIR
Unix sockets generally have a maximum path length. Depending on your
$TEST_DIR, it may be exceeded and then all tests that create and use
Unix sockets there may fail.
Circumvent this by adding a new scratch directory specifically for
Unix socket files. It defaults to a temporary directory (mktemp -d)
that is completely removed after the iotests are done.
(By default, mktemp -d creates a /tmp/tmp.XXXXXXXXXX directory, which
should be short enough for our use cases.)
Use mkdir -p to create the directory (because it seems right), and do
the same for $TEST_DIR (because there is no reason for that to be
created in any different way).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id:
20191017133155.5327-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Fri, 11 Oct 2019 09:07:11 +0000 (12:07 +0300)]
Revert "mirror: Only mirror granularity-aligned chunks"
This reverts commit
9adc1cb49af8d4e54f57980b1eed5c0a4b2dafa6.
"mirror: Only mirror granularity-aligned chunks"
Since previous commit unaligned chunks are supported by
do_sync_target_write.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id:
20191011090711.19940-6-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Fri, 11 Oct 2019 09:07:10 +0000 (12:07 +0300)]
block/mirror: support unaligned write in active mirror
Prior
9adc1cb49af8d do_sync_target_write had a bug: it reset aligned-up
region in the dirty bitmap, which means that we may not copy some bytes
and assume them copied, which actually leads to producing corrupted
target.
So
9adc1cb49af8d forced dirty bitmap granularity to be
request_alignment for mirror-top filter, so we are not working with
unaligned requests. However forcing large alignment obviously decreases
performance of unaligned requests.
This commit provides another solution for the problem: if unaligned
padding is already dirty, we can safely ignore it, as
1. It's dirty, it will be copied by mirror_iteration anyway
2. It's dirty, so skipping it now we don't increase dirtiness of the
bitmap and therefore don't damage "synchronicity" of the
write-blocking mirror.
If unaligned padding is not dirty, we just write it, no reason to touch
dirty bitmap if we succeed (on failure we'll set the whole region
ofcourse, but we loss "synchronicity" on failure anyway).
Note: we need to disable dirty_bitmap, otherwise we will not be able to
see in do_sync_target_write bitmap state before current operation. We
may of course check dirty bitmap before the operation in
bdrv_mirror_top_do_write and remember it, but we don't need active
dirty bitmap for write-blocking mirror anyway.
New code-path is unused until the following commit reverts
9adc1cb49af8d.
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id:
20191011090711.19940-5-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Fri, 11 Oct 2019 09:07:09 +0000 (12:07 +0300)]
block/block-backend: add blk_co_pwritev_part
Add blk write function with qiov_offset parameter. It's needed for the
following commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id:
20191011090711.19940-4-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Fri, 11 Oct 2019 09:07:08 +0000 (12:07 +0300)]
block/mirror: simplify do_sync_target_write
do_sync_target_write is called from bdrv_mirror_top_do_write after
write/discard operation, all inside active_write/active_write_settle
protecting us from mirror iteration. So the whole area is dirty for
sure, no reason to examine dirty bitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id:
20191011090711.19940-3-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Fri, 11 Oct 2019 09:07:07 +0000 (12:07 +0300)]
hbitmap: handle set/reset with zero length
Passing zero length to these functions leads to unpredicted results.
Zero-length set/reset may occur in active-mirror, on zero-length write
(which is unlikely, but not guaranteed to never happen).
Let's just do nothing on zero-length request.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id:
20191011090711.19940-2-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Tue, 17 Sep 2019 09:20:04 +0000 (11:20 +0200)]
iotests: Cache supported_formats()
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id:
20190917092004.999-8-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Tue, 17 Sep 2019 09:20:03 +0000 (11:20 +0200)]
iotests: Test driver whitelisting in 136
null-aio may not be whitelisted. Skip all test cases that require it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id:
20190917092004.999-7-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Tue, 17 Sep 2019 09:20:02 +0000 (11:20 +0200)]
iotests: Test driver whitelisting in 093
null-aio may not be whitelisted. Skip all test cases that require it.
(And skip the whole test if null-co is not whitelisted.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id:
20190917092004.999-6-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Tue, 17 Sep 2019 09:20:01 +0000 (11:20 +0200)]
iotests: Let skip_if_unsupported accept a function
This lets tests use skip_if_unsupported() with a potentially variable
list of required formats.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id:
20190917092004.999-5-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Tue, 17 Sep 2019 09:20:00 +0000 (11:20 +0200)]
iotests: Use case_skip() in skip_if_unsupported()
skip_if_unsupported() should use the stronger variant case_skip(),
because this allows it to be used even with setUp() (in a meaningful
way).
In the process, make it explicit what we expect the first argument of
the func_wrapper to be (namely something derived of QMPTestCase).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id:
20190917092004.999-4-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Tue, 17 Sep 2019 09:19:59 +0000 (11:19 +0200)]
iotests: Allow skipping test cases
case_notrun() does not actually skip the current test case. It just
adds a "notrun" note and then returns to the caller, who manually has to
skip the test. Generally, skipping a test case is as simple as
returning from the current function, but not always: For example, this
model does not allow skipping tests already in the setUp() function.
Thus, add a QMPTestCase.case_skip() function that invokes case_notrun()
and then self.skipTest(). To make this work, we need to filter the
information on how many test cases were skipped from the unittest
output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-id:
20190917092004.999-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Tue, 17 Sep 2019 09:19:58 +0000 (11:19 +0200)]
iotests: Prefer null-co over null-aio
We use null-co basically everywhere in the iotests. Unless we want to
test null-aio specifically, we should use it instead (for consistency).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id:
20190917092004.999-2-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Peter Maydell [Sat, 26 Oct 2019 09:13:48 +0000 (10:13 +0100)]
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-251019-3' into staging
Testing updates (split from mega PR)
- various Travis dependency updates
- enable tcg debug for check-tcg
- additional Xcode build for Cirrus
- dependency tweak for gitlab
# gpg: Signature made Fri 25 Oct 2019 20:35:56 BST
# gpg: using RSA key
6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-next-251019-3:
tests/docker: update Travis image to a more current version
tests/docker: set HOST_ARCH if we don't have ARCH
travis.yml: --enable-debug-tcg to check-tcg
gitlab-ci.yml: Use libvdeplug-dev to compile-test the VDE network backend
travis.yml: cache the clang sanitizer build
tests/vm/netbsd: Disable IPv6
tests/vm: Let subclasses disable IPv6
cirrus.yml: add latest Xcode build target
travis.yml: bump Xcode 10 to latest dot release
travis.yml: Test the release tarball
travis.yml: Fix the ccache lines
travis.yml: Use newer version of libgnutls and libpng
travis.yml: Use libsdl2 instead of libsdl1.2, and install libsdl2-image
travis.yml: Add libvdeplug-dev to compile-test net/vde.c
travis.yml: reduce scope of the --enable-debug build
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 25 Oct 2019 20:57:41 +0000 (21:57 +0100)]
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
# gpg: Signature made Fri 25 Oct 2019 20:18:23 BST
# gpg: using RSA key
8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
yield_until_fd_readable: make it work with any AioContect
virtio-blk: Add blk_drain() to virtio_blk_device_unrealize()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alex Bennée [Thu, 24 Oct 2019 10:14:32 +0000 (11:14 +0100)]
tests/docker: update Travis image to a more current version
This isn't the latest one available on hub.docker.com but it does
match the ID reported by the Xenial builds running on Travis:
instance: ... travis-ci-sardonyx-xenial-
1553530528-
f909ac5
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Mon, 7 Oct 2019 19:03:44 +0000 (19:03 +0000)]
tests/docker: set HOST_ARCH if we don't have ARCH
As the docker rules want to be able to be run on a virgin unconfigured
checkout add a fallback and use it if we need to.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Wed, 23 Oct 2019 16:47:51 +0000 (17:47 +0100)]
travis.yml: --enable-debug-tcg to check-tcg
This adds a whole bunch of asserts which will catch bugs you might
introduce into the TCG code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Thomas Huth [Wed, 16 Oct 2019 13:10:02 +0000 (15:10 +0200)]
gitlab-ci.yml: Use libvdeplug-dev to compile-test the VDE network backend
The libvdeplug-dev package is required to compile-test net/vde.c.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20191016131002.29663-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Tue, 22 Oct 2019 13:07:40 +0000 (14:07 +0100)]
travis.yml: cache the clang sanitizer build
Hopefully we'll see the same benefits as the other builds.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Eduardo Habkost [Fri, 18 Oct 2019 18:17:05 +0000 (15:17 -0300)]
tests/vm/netbsd: Disable IPv6
Workaround for issues when the host has no IPv6 connectivity.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20191018181705.17957-4-ehabkost@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Eduardo Habkost [Fri, 18 Oct 2019 18:17:04 +0000 (15:17 -0300)]
tests/vm: Let subclasses disable IPv6
The mechanism will be used to work around issues related to IPv6
on the netbsd image builder.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20191018181705.17957-3-ehabkost@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Wed, 16 Oct 2019 18:27:13 +0000 (19:27 +0100)]
cirrus.yml: add latest Xcode build target
CirrusCI provides a mojave-xcode alias for the latest Xcode available.
Let's use it to make sure we track the latest releases.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Wed, 16 Oct 2019 18:17:08 +0000 (19:17 +0100)]
travis.yml: bump Xcode 10 to latest dot release
According to:
https://docs.travis-ci.com/user/reference/osx/#macos-version
we have 10.3 available so lets use it. I don't know what Apple's
deprecation policy is for Xcode because it requires an AppleID to find
out.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Mon, 7 Oct 2019 16:04:49 +0000 (18:04 +0200)]
travis.yml: Test the release tarball
Add a job to generate the release tarball and build/install few
QEMU targets from it.
Ideally we should build the 'efi' target from the 'roms' directory,
but it is too time consuming.
This job is only triggered when a tag starting with 'v' is pushed,
which is the case with release candidate tags.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20191007160450.3619-1-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Thomas Huth [Wed, 9 Oct 2019 17:07:00 +0000 (19:07 +0200)]
travis.yml: Fix the ccache lines
The "command -v ccache && ccache ..." likely were supposed to test
the availability of ccache before running the program. But this
shell construct causes Travis to abort if ccache is not available.
Use an if-statement instead to fix this problem.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20191009170701.14756-5-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Thomas Huth [Wed, 9 Oct 2019 17:06:59 +0000 (19:06 +0200)]
travis.yml: Use newer version of libgnutls and libpng
libgnutls-dev and libpng12-dev are not available in newer versions
of Ubuntu anymore, so installing these packages fails e.g. in the
new arm64 containers on Travis. Let's use newer versions of these
packages by default instead. (The old versions still get tested in
the "gcc-9" build).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20191009170701.14756-4-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Thomas Huth [Wed, 9 Oct 2019 17:06:58 +0000 (19:06 +0200)]
travis.yml: Use libsdl2 instead of libsdl1.2, and install libsdl2-image
We've removed support for SDL 1.2 quite a while ago already, so let's
use SDL 2 now in Travis to get test coverage for SDL again.
And while we're at it, also add libsdl2-image-dev which can be used
by QEMU nowadays, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20191009170701.14756-3-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Thomas Huth [Wed, 9 Oct 2019 17:06:57 +0000 (19:06 +0200)]
travis.yml: Add libvdeplug-dev to compile-test net/vde.c
This library is needed to compile the VDE network backend.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20191009170701.14756-2-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alex Bennée [Wed, 2 Oct 2019 10:23:29 +0000 (11:23 +0100)]
travis.yml: reduce scope of the --enable-debug build
Adding debug makes things run a bit slower so lets not hammer all the
targets.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Peter Maydell [Fri, 25 Oct 2019 17:32:26 +0000 (18:32 +0100)]
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-oct-24-2019-v2' into staging
MIPS queue for October 24th, 2019 - v2
# gpg: Signature made Fri 25 Oct 2019 17:37:29 BST
# gpg: using RSA key
D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-oct-24-2019-v2:
tests/ssh_linux_malta: Fix 64-bit target tests
tests/ssh_linux_malta: Refactor how to get image/kernel info
tests/ssh_linux_malta: Match stricter console output
tests/ssh_linux_malta: Remove duplicated test
tests/ssh_linux_malta: Run tests using a snapshot image
target/mips: Refactor handling of vector compare 'less than' (signed) instructions
target/mips: Refactor handling of vector compare 'equal' instructions
target/mips: Demacro LMI decoder
target/mips: msa: Split helpers for ASUB_<S|U>.<B|H|W|D>
target/mips: msa: Split helpers for HSUB_<S|U>.<H|W|D>
target/mips: msa: Split helpers for PCK<EV|OD>.<B|H|W|D>
target/mips: msa: Split helpers for S<LL|RA|RAR|RL|RLR>.<B|H|W|D>
target/mips: msa: Split helpers for HADD_<S|U>.<H|W|D>
target/mips: msa: Split helpers for ADD<_A|S_A|S_S|S_U|V>.<B|H|W|D>
target/mips: msa: Split helpers for ILV<EV|OD|L|R>.<B|H|W|D>
target/mips: msa: Split helpers for <MAX|MIN>_<S|U>.<B|H|W|D>
target/mips: msa: Split helpers for <MAX|MIN>_A.<B|H|W|D>
MAINTAINERS: Update mail address of Aleksandar Rikalo
target/mips: Clean up op_helper.c
target/mips: Clean up helper.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Sat, 19 Oct 2019 15:34:37 +0000 (17:34 +0200)]
tests/ssh_linux_malta: Fix 64-bit target tests
Commit
9090d3332cdcc added tests for specific to the 32-bit
machines, which inadvertently make the 64-bit tests failing.
Now than we have this information available in the CPU_INFO
array, use it to have the 64-bit tests back.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
20191019153437.9820-12-f4bug@amsat.org>
Philippe Mathieu-Daudé [Sat, 19 Oct 2019 15:34:36 +0000 (17:34 +0200)]
tests/ssh_linux_malta: Refactor how to get image/kernel info
The qcow and kernel images use a similar pattern regarding they
are for big/little endianess, or 32/64 bit.
Refactor using more dictionary keys.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
20191019153437.9820-11-f4bug@amsat.org>
Philippe Mathieu-Daudé [Sat, 19 Oct 2019 15:34:35 +0000 (17:34 +0200)]
tests/ssh_linux_malta: Match stricter console output
Match on stricter console output.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
20191019153437.9820-10-f4bug@amsat.org>
Philippe Mathieu-Daudé [Sat, 19 Oct 2019 15:34:34 +0000 (17:34 +0200)]
tests/ssh_linux_malta: Remove duplicated test
Remove duplicated test (probably copy/paste error in
commit
9090d3332cdcc).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
20191019153437.9820-9-f4bug@amsat.org>
Philippe Mathieu-Daudé [Sat, 19 Oct 2019 15:34:33 +0000 (17:34 +0200)]
tests/ssh_linux_malta: Run tests using a snapshot image
If a test fails, it can corrupt the underlying QCow2 image,
making further tests failing.
Fix this by running each test with a snapshot.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
20191019153437.9820-8-f4bug@amsat.org>
Filip Bozuta [Wed, 23 Oct 2019 13:37:05 +0000 (15:37 +0200)]
target/mips: Refactor handling of vector compare 'less than' (signed) instructions
Remove unnecessary argument and provide separate function for each
instruction.
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
1571837825-24438-3-git-send-email-Filip.Bozuta@rt-rk.com>
Filip Bozuta [Wed, 23 Oct 2019 13:37:04 +0000 (15:37 +0200)]
target/mips: Refactor handling of vector compare 'equal' instructions
Remove unnecessary argument and provide separate function for each
instruction.
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
1571837825-24438-2-git-send-email-Filip.Bozuta@rt-rk.com>
Aleksandar Markovic [Wed, 23 Oct 2019 10:23:47 +0000 (12:23 +0200)]
target/mips: Demacro LMI decoder
This makes searches for instances of opcode usages easier.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
1571826227-10583-15-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Wed, 23 Oct 2019 10:23:45 +0000 (12:23 +0200)]
target/mips: msa: Split helpers for ASUB_<S|U>.<B|H|W|D>
Achieves clearer code and slightly better performance.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Message-Id: <
1571826227-10583-13-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Wed, 23 Oct 2019 10:23:44 +0000 (12:23 +0200)]
target/mips: msa: Split helpers for HSUB_<S|U>.<H|W|D>
Achieves clearer code and slightly better performance.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Message-Id: <
1571826227-10583-12-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Wed, 23 Oct 2019 10:23:43 +0000 (12:23 +0200)]
target/mips: msa: Split helpers for PCK<EV|OD>.<B|H|W|D>
Achieves clearer code and slightly better performance.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
1571826227-10583-11-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Wed, 23 Oct 2019 10:23:42 +0000 (12:23 +0200)]
target/mips: msa: Split helpers for S<LL|RA|RAR|RL|RLR>.<B|H|W|D>
Achieves clearer code and slightly better performance.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
1571826227-10583-10-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Wed, 23 Oct 2019 10:23:41 +0000 (12:23 +0200)]
target/mips: msa: Split helpers for HADD_<S|U>.<H|W|D>
Achieves clearer code and slightly better performance.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
1571826227-10583-9-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Wed, 23 Oct 2019 10:23:40 +0000 (12:23 +0200)]
target/mips: msa: Split helpers for ADD<_A|S_A|S_S|S_U|V>.<B|H|W|D>
Achieves clearer code and slightly better performance.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
1571826227-10583-8-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Wed, 23 Oct 2019 10:23:39 +0000 (12:23 +0200)]
target/mips: msa: Split helpers for ILV<EV|OD|L|R>.<B|H|W|D>
Achieves clearer code and slightly better performance.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
1571826227-10583-7-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Wed, 23 Oct 2019 10:23:38 +0000 (12:23 +0200)]
target/mips: msa: Split helpers for <MAX|MIN>_<S|U>.<B|H|W|D>
Achieves clearer code and slightly better performance.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
1571826227-10583-6-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Wed, 23 Oct 2019 10:23:37 +0000 (12:23 +0200)]
target/mips: msa: Split helpers for <MAX|MIN>_A.<B|H|W|D>
Achieves clearer code and slightly better performance.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
1571826227-10583-5-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Wed, 23 Oct 2019 10:23:36 +0000 (12:23 +0200)]
MAINTAINERS: Update mail address of Aleksandar Rikalo
Aleksandar Rikalo wishes to change his primary mail address for QEMU.
Some minor line order is corrected in .mailmap to be alphabetical,
too.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
1571826227-10583-4-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Wed, 23 Oct 2019 10:23:35 +0000 (12:23 +0200)]
target/mips: Clean up op_helper.c
Mostly fix errors and warnings reported by 'checkpatch.pl -f'.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
1571826227-10583-3-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Wed, 23 Oct 2019 10:23:34 +0000 (12:23 +0200)]
target/mips: Clean up helper.c
Mostly fix errors and warnings reported by 'checkpatch.pl -f'.
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
1571826227-10583-2-git-send-email-aleksandar.markovic@rt-rk.com>
Peter Maydell [Fri, 25 Oct 2019 13:59:53 +0000 (14:59 +0100)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Fix data corruption bug that is triggered in partial cluster
allocation with default options
- qapi: add support for blkreplay driver
- doc: Describe missing generic -blockdev options
- iotests: Fix 118 when run as root
- Minor code cleanups
# gpg: Signature made Fri 25 Oct 2019 14:19:04 BST
# gpg: using RSA key
7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
qcow2: Fix corruption bug in qcow2_detect_metadata_preallocation()
coroutine: Add qemu_co_mutex_assert_locked()
doc: Describe missing generic -blockdev options
block/backup: drop dead code from backup_job_create
blockdev: Use error_report() in hmp_commit()
iotests: Skip read-only cases in 118 when run as root
qapi: add support for blkreplay driver
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Kevin Wolf [Thu, 24 Oct 2019 14:26:58 +0000 (16:26 +0200)]
qcow2: Fix corruption bug in qcow2_detect_metadata_preallocation()
qcow2_detect_metadata_preallocation() calls qcow2_get_refcount() which
requires s->lock to be taken to protect its accesses to the refcount
table and refcount blocks. However, nothing in this code path actually
took the lock. This could cause the same cache entry to be used by two
requests at the same time, for different tables at different offsets,
resulting in image corruption.
As it would be preferable to base the detection on consistent data (even
though it's just heuristics), let's take the lock not only around the
qcow2_get_refcount() calls, but around the whole function.
This patch takes the lock in qcow2_co_block_status() earlier and asserts
in qcow2_detect_metadata_preallocation() that we hold the lock.
Fixes:
69f47505ee66afaa513305de0c1895a224e52c45
Cc: qemu-stable@nongnu.org
Reported-by: Michael Weiser <michael.weiser@gmx.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Thu, 24 Oct 2019 14:26:57 +0000 (16:26 +0200)]
coroutine: Add qemu_co_mutex_assert_locked()
Some functions require that the caller holds a certain CoMutex for them
to operate correctly. Add a function so that they can assert the lock is
really held.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Peter Maydell [Fri, 25 Oct 2019 13:17:08 +0000 (14:17 +0100)]
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-pull-request' into staging
Fix typos and docs, trivial changes and RTC devices split
# gpg: Signature made Fri 25 Oct 2019 09:35:02 BST
# gpg: using RSA key
CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-pull-request:
hw/rtc/aspeed_rtc: Remove unused includes
hw/rtc/xlnx-zynqmp-rtc: Remove unused "ptimer.h" include
hw/rtc/mc146818: Include mc146818rtc_regs.h a bit less
hw: Move Aspeed RTC from hw/timer/ to hw/rtc/ subdirectory
hw: Move Exynos4210 RTC from hw/timer/ to hw/rtc/ subdirectory
hw: Move Xilinx ZynqMP RTC from hw/timer/ to hw/rtc/ subdirectory
hw: Move DS1338 device from hw/timer/ to hw/rtc/ subdirectory
hw: Move TWL92230 device from hw/timer/ to hw/rtc/ subdirectory
hw: Move sun4v hypervisor RTC from hw/timer/ to hw/rtc/ subdirectory
hw: Move M41T80 device from hw/timer/ to hw/rtc/ subdirectory
hw: Move M48T59 device from hw/timer/ to hw/rtc/ subdirectory
hw: Move MC146818 device from hw/timer/ to hw/rtc/ subdirectory
hw: Move PL031 device from hw/timer/ to hw/rtc/ subdirectory
hw/timer: Compile devices not target-dependent as common object
qemu-timer: reuse MIN macro in qemu_timeout_ns_to_ms
event_notifier: avoid dandling file descriptor in event_notifier_cleanup
util/async: avoid useless cast
pci_bridge: fix a typo in comment
qemu-options.hx: Update for reboot-timeout parameter
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/timer/trace-events
Kevin Wolf [Tue, 15 Oct 2019 10:29:58 +0000 (12:29 +0200)]
doc: Describe missing generic -blockdev options
We added more generic options after introducing -blockdev and forgot to
update the documentation (man page and --help output) accordingly. Do
that now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Vladimir Sementsov-Ogievskiy [Thu, 17 Oct 2019 14:21:22 +0000 (17:21 +0300)]
block/backup: drop dead code from backup_job_create
After commit
00e30f05de1d195, there is no more "goto error" points
after job creation, so after "error:" @job is always NULL and we don't
need roll-back job creation.
Reported-by: Coverity (CID 1406402)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Mon, 27 May 2019 16:01:41 +0000 (18:01 +0200)]
blockdev: Use error_report() in hmp_commit()
Instead of using monitor_printf() to report errors, hmp_commit() should
use error_report() like other places do.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Kevin Wolf [Fri, 18 Oct 2019 11:46:42 +0000 (13:46 +0200)]
iotests: Skip read-only cases in 118 when run as root
Some tests in 118 use chmod to remove write permissions from the file
and assume that the image can indeed not be opened read-write
afterwards. This doesn't work when the test is run as root, because root
can still open the file as writable even when the permission bit isn't
set.
Introduce a @skip_if_root decorator and use it in 118 to skip the tests
in question when the script is run as root.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Pavel Dovgalyuk [Wed, 16 Oct 2019 08:40:39 +0000 (11:40 +0300)]
qapi: add support for blkreplay driver
This patch adds support for blkreplay driver to the blockdev options.
Now blkreplay can be used with -blockdev command line option
in the following format:
-blockdev driver=blkreplay,image=file-node-name,node-name=replay-node-name
This option makes possible implementation of the better command
line support for record/replay invocations.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Dietmar Maurer [Thu, 24 Oct 2019 04:56:10 +0000 (06:56 +0200)]
yield_until_fd_readable: make it work with any AioContect
Simply use qemu_get_current_aio_context().
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
Message-Id: <
20191024045610.9071-1-dietmar@proxmox.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Julia Suvorova [Fri, 18 Oct 2019 14:28:56 +0000 (16:28 +0200)]
virtio-blk: Add blk_drain() to virtio_blk_device_unrealize()
QEMU does not wait for completed I/O requests, assuming that the guest
driver will reset the device before calling unrealize(). This does not
happen on Windows, and QEMU crashes in virtio_notify(), getting the
result of a completed I/O request on hot-unplugged device.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <
20191018142856.31870-1-jusual@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Maydell [Fri, 25 Oct 2019 12:12:16 +0000 (13:12 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20191025' into staging
target-arm queue:
* raspi boards: some cleanup
* raspi: implement the bcm2835 system timer device
* raspi: implement a dummy thermal sensor
* misc devices: switch to ptimer transaction API
* cache TB flag state to improve performance of cpu_get_tb_cpu_state
* aspeed: Add an AST2600 eval board
# gpg: Signature made Fri 25 Oct 2019 13:11:25 BST
# gpg: using RSA key
E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-
20191025: (42 commits)
hw/arm/highbank: Use AddressSpace when using write_secondary_boot()
hw/arm/raspi: Use AddressSpace when using arm_boot::write_secondary_boot
hw/arm/bcm2836: Rename cpus[] as cpu[].core
hw/arm/bcm2836: Make the SoC code modular
hw/arm/bcm2835_peripherals: Use the SYS_timer
hw/timer/bcm2835: Add the BCM2835 SYS_timer
hw/arm/bcm2835_peripherals: Use the thermal sensor block
hw/misc/bcm2835_thermal: Add a dummy BCM2835 thermal sensor
hw/watchdog/milkymist-sysctl.c: Switch to transaction-based ptimer API
hw/m68k/mcf5206.c: Switch to transaction-based ptimer API
hw/timer/grlib_gptimer.c: Switch to transaction-based ptimer API
hw/timer/slavio_timer.c: Switch to transaction-based ptimer API
hw/timer/slavio_timer: Remove useless check for NULL t->timer
hw/dma/xilinx_axidma.c: Switch to transaction-based ptimer API
hw/timer/xilinx_timer.c: Switch to transaction-based ptimer API
hw/net/fsl_etsec/etsec.c: Switch to transaction-based ptimer API
target/arm: Rely on hflags correct in cpu_get_tb_cpu_state
linux-user/arm: Rebuild hflags for TARGET_WORDS_BIGENDIAN
linux-user/aarch64: Rebuild hflags for TARGET_WORDS_BIGENDIAN
target/arm: Rebuild hflags for M-profile NVIC
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Sat, 19 Oct 2019 23:47:13 +0000 (01:47 +0200)]
hw/arm/highbank: Use AddressSpace when using write_secondary_boot()
write_secondary_boot() is used in SMP configurations where the
CPU address space might not be the main System Bus.
The rom_add_blob_fixed_as() function allow us to specify an
address space. Use it to write each boot blob in the corresponding
CPU address space.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
20191019234715.25750-15-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Sat, 19 Oct 2019 23:47:09 +0000 (01:47 +0200)]
hw/arm/raspi: Use AddressSpace when using arm_boot::write_secondary_boot
write_secondary_boot() is used in SMP configurations where the
CPU address space might not be the main System Bus.
The rom_add_blob_fixed_as() function allow us to specify an
address space. Use it to write each boot blob in the corresponding
CPU address space.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
20191019234715.25750-11-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Sat, 19 Oct 2019 23:47:05 +0000 (01:47 +0200)]
hw/arm/bcm2836: Rename cpus[] as cpu[].core
As we are going to add more core-specific fields, add a 'cpu'
structure and move the ARMCPU field there as 'core'.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
20191019234715.25750-7-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Sat, 19 Oct 2019 23:47:04 +0000 (01:47 +0200)]
hw/arm/bcm2836: Make the SoC code modular
This file creates the BCM2836/BCM2837 blocks.
The biggest differences with the BCM2838 we are going to add, are
the base addresses of the interrupt controller and the peripherals.
Add these addresses in the BCM283XInfo structure to make this
block more modular. Remove the MCORE_OFFSET offset as it is
not useful and rather confusing.
Reviewed-by: Esteban Bosse <estebanbosse@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
20191019234715.25750-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Sat, 19 Oct 2019 23:47:03 +0000 (01:47 +0200)]
hw/arm/bcm2835_peripherals: Use the SYS_timer
Connect the recently added SYS_timer.
Now U-Boot does not hang anymore polling a free running counter
stuck at 0.
This timer is also used by the Linux kernel thermal subsystem.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20191019234715.25750-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Sat, 19 Oct 2019 23:47:02 +0000 (01:47 +0200)]
hw/timer/bcm2835: Add the BCM2835 SYS_timer
Add the 64-bit free running timer. Do not model the COMPARE register
(no IRQ generated).
This timer is used by Linux kernel and recently U-Boot:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/clocksource/bcm2835_timer.c?h=v3.7
https://github.com/u-boot/u-boot/blob/v2019.07/include/configs/rpi.h#L19
Datasheet used:
https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
20191019234715.25750-4-f4bug@amsat.org
[PMM: squashed in switch to using memset in reset]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Sat, 19 Oct 2019 23:47:01 +0000 (01:47 +0200)]
hw/arm/bcm2835_peripherals: Use the thermal sensor block
Map the thermal sensor in the BCM2835 block.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20191019234715.25750-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Sat, 19 Oct 2019 23:47:00 +0000 (01:47 +0200)]
hw/misc/bcm2835_thermal: Add a dummy BCM2835 thermal sensor
We will soon implement the SYS_timer. This timer is used by Linux
in the thermal subsystem, so once available, the subsystem will be
enabled and poll the temperature sensors. We need to provide the
minimum required to keep Linux booting.
Add a dummy thermal sensor returning ~25°C based on:
https://github.com/raspberrypi/linux/blob/rpi-5.3.y/drivers/thermal/broadcom/bcm2835_thermal.c
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
20191019234715.25750-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 21 Oct 2019 14:10:40 +0000 (15:10 +0100)]
hw/watchdog/milkymist-sysctl.c: Switch to transaction-based ptimer API
Switch the milkymist-sysctl code away from bottom-half based
ptimers to the new transaction-based ptimer API. This just requires
adding begin/commit calls around the various places that modify the
ptimer state, and using the new ptimer_init() function to create the
timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id:
20191021141040.11007-1-peter.maydell@linaro.org
Peter Maydell [Mon, 21 Oct 2019 14:06:00 +0000 (15:06 +0100)]
hw/m68k/mcf5206.c: Switch to transaction-based ptimer API
Switch the mcf5206 code away from bottom-half based ptimers to
the new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id:
20191021140600.10725-1-peter.maydell@linaro.org
Peter Maydell [Mon, 21 Oct 2019 13:43:56 +0000 (14:43 +0100)]
hw/timer/grlib_gptimer.c: Switch to transaction-based ptimer API
Switch the grlib_gptimer code away from bottom-half based ptimers to
the new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id:
20191021134357.14266-3-peter.maydell@linaro.org
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 21 Oct 2019 13:43:57 +0000 (14:43 +0100)]
hw/timer/slavio_timer.c: Switch to transaction-based ptimer API
Switch the slavio_timer code away from bottom-half based ptimers to
the new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20191021134357.14266-4-peter.maydell@linaro.org
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Thu, 3 Oct 2019 23:04:04 +0000 (01:04 +0200)]
hw/rtc/aspeed_rtc: Remove unused includes
The system <stdint.h> include is already provided by "osdep.h"
(the scripts/clean-includes file clean such headers).
Commit
64552b6be47 suggests we don't need to include "hw/irq.h":
Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20191003230404.19384-15-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Thu, 3 Oct 2019 23:04:03 +0000 (01:04 +0200)]
hw/rtc/xlnx-zynqmp-rtc: Remove unused "ptimer.h" include
The "hw/ptimer.h" header is not used, remove it.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20191003230404.19384-14-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Thu, 3 Oct 2019 23:04:02 +0000 (01:04 +0200)]
hw/rtc/mc146818: Include mc146818rtc_regs.h a bit less
Only 2 source files require the "mc146818rtc_regs.h" header.
Instead of having it processed 12 times, by all objects
using "mc146818rtc.h", include it directly where used.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20191003230404.19384-13-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Thu, 3 Oct 2019 23:04:01 +0000 (01:04 +0200)]
hw: Move Aspeed RTC from hw/timer/ to hw/rtc/ subdirectory
Move RTC devices under the hw/rtc/ subdirectory.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20191003230404.19384-12-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Thu, 3 Oct 2019 23:04:00 +0000 (01:04 +0200)]
hw: Move Exynos4210 RTC from hw/timer/ to hw/rtc/ subdirectory
Move RTC devices under the hw/rtc/ subdirectory.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20191003230404.19384-11-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Thu, 3 Oct 2019 23:03:59 +0000 (01:03 +0200)]
hw: Move Xilinx ZynqMP RTC from hw/timer/ to hw/rtc/ subdirectory
Move RTC devices under the hw/rtc/ subdirectory.
Remove Alistair outdated email address (see commit
c22e580c2ad).
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20191003230404.19384-10-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Thu, 3 Oct 2019 23:03:58 +0000 (01:03 +0200)]
hw: Move DS1338 device from hw/timer/ to hw/rtc/ subdirectory
The DS1338 is a Real Time Clock, not a timer.
Move it under the hw/rtc/ subdirectory.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20191003230404.19384-9-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Thu, 3 Oct 2019 23:03:57 +0000 (01:03 +0200)]
hw: Move TWL92230 device from hw/timer/ to hw/rtc/ subdirectory
The TWL92230 is an "energy management device" companion with
a RTC. Since we mostly model the RTC, move it under the hw/rtc/
subdirectory.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20191003230404.19384-8-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Thu, 3 Oct 2019 23:03:56 +0000 (01:03 +0200)]
hw: Move sun4v hypervisor RTC from hw/timer/ to hw/rtc/ subdirectory
Move RTC devices under the hw/rtc/ subdirectory.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <
20191003230404.19384-7-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Thu, 3 Oct 2019 23:03:55 +0000 (01:03 +0200)]
hw: Move M41T80 device from hw/timer/ to hw/rtc/ subdirectory
The M41T80 is a Real Time Clock, not a timer.
Move it under the hw/rtc/ subdirectory.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20191003230404.19384-6-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Thu, 3 Oct 2019 23:03:54 +0000 (01:03 +0200)]
hw: Move M48T59 device from hw/timer/ to hw/rtc/ subdirectory
The M48T59 is a Real Time Clock, not a timer.
Move it under the hw/rtc/ subdirectory.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20191003230404.19384-5-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Thu, 3 Oct 2019 23:03:53 +0000 (01:03 +0200)]
hw: Move MC146818 device from hw/timer/ to hw/rtc/ subdirectory
The MC146818 is a Real Time Clock, not a timer.
Move it under the hw/rtc/ subdirectory.
Use copyright statement from
80cabfad163 for "hw/rtc/mc146818rtc.h".
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20191003230404.19384-4-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Thu, 3 Oct 2019 23:03:52 +0000 (01:03 +0200)]
hw: Move PL031 device from hw/timer/ to hw/rtc/ subdirectory
The PL031 is a Real Time Clock, not a timer.
Move it under the hw/rtc/ subdirectory.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20191003230404.19384-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>