media: rcar_fdp1: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rcar-csi2: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rc: sunxi-cir: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rc: st_rc: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rc: mtk-cir: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rc: meson-ir: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rc: ir-hix5hd2: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rc: img-ir: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mx2_emmaprp: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-jpeg: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: meson: ge2d: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: imx-pxp: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: imx-jpeg: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: exynos4-is: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: exynos-gsc: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: davinci: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: coda: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: cec: s5p_cec: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: cec: ao-cec: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: cadence: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: am437x: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: uvcvideo: Don't spam the log in uvc_ctrl_restore_values()

Don't report the restored controls with dev_info, use dev_dbg instead.
This prevents a lot of noise in the kernel log.

Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: docs: Document the behaviour of uvcvideo driver

The uvc driver relies on the camera firmware to keep the control states
and therefore is not capable of changing an inactive control.

Allow returning -EACCES in those cases.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: uvcvideo: Set error_idx during ctrl_commit errors

If we have an error setting a control, return the affected control in
the error_idx field.

Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: uvcvideo: Check controls flags before accessing them

We can figure out if reading/writing a set of controls can fail without
accessing them by checking their flags.

This way we can honor the API closer:

If an error is found when validating the list of controls passed with
VIDIOC_G_EXT_CTRLS, then error_idx shall be set to ctrls->count to
indicate to userspace that no actual hardware was touched.

Fixes v4l2-compliance:
Control ioctls (Input 0):
warn: v4l2-test-controls.cpp(765): g_ext_ctrls(0) invalid error_idx 0
                fail: v4l2-test-controls.cpp(645): invalid error index write only control
        test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL

Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: uvcvideo: Use control names from framework

The framework already contains a map of IDs to names, lets use it when
possible.

Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Suggested-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: uvcvideo: Increase the size of UVC_METADATA_BUF_SIZE

Hans has discovered that in his test device, for the H264 format
bytesused goes up to about 570, for YUYV it will actually go up
to a bit over 5000 bytes, and for MJPG up to about 2706 bytes.

We should also, according to V4L2_META_FMT_UVC docs, drop headers when
the buffer is full.

Credit-to: Hans Verkuil <hverkuil@xs4all.nl>

Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: uvcvideo: Set unique vdev name based in type

All the entities must have a unique name. We can have a descriptive and
unique name by appending the function and the entity->id.

This is even resilent to multi chain devices.

Fixes v4l2-compliance:
Media Controller ioctls:
                fail: v4l2-test-media.cpp(205): v2_entity_names_set.find(key) != v2_entity_names_set.end()
        test MEDIA_IOC_G_TOPOLOGY: FAIL
                fail: v4l2-test-media.cpp(394): num_data_links != num_links
test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: uvcvideo: Use dev->name for querycap()

Use the device name for the card name instead of vdev->name. That way
all the devices have a different name instead of the common vdev->name.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: uvcvideo: Add support for V4L2_CTRL_TYPE_CTRL_CLASS

Create all the class controls for the device defined controls.

Fixes v4l2-compliance:
Control ioctls (Input 0):
fail: v4l2-test-controls.cpp(216): missing control class for class 00980000
fail: v4l2-test-controls.cpp(216): missing control tclass for class 009a0000
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: FAIL

Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: uvcvideo: refactor __uvc_ctrl_add_mapping

Pass the chain instead of the device. We want to keep the reference to
the chain that controls belong to.

We need to delay the initialization of the controls after the chains
have been initialized.

This is a cleanup needed for the next patches.

Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: uvcvideo: Return -EIO for control errors

The device is doing something unexpected with the control. Either because
the protocol is not properly implemented or there has been a HW error.

Fixes v4l2-compliance:

Control ioctls (Input 0):
                fail: v4l2-test-controls.cpp(448): s_ctrl returned an error (22)
        test VIDIOC_G/S_CTRL: FAIL
                fail: v4l2-test-controls.cpp(698): s_ext_ctrls returned an error (22)
        test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL

Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: uvcvideo: Set capability in s_param

Fixes v4l2-compliance:

Format ioctls (Input 0):
                warn: v4l2-test-formats.cpp(1339): S_PARM is supported but doesn't report V4L2_CAP_TIMEPERFRAME
                fail: v4l2-test-formats.cpp(1241): node->has_frmintervals && !cap->capability

Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: uvcvideo: Remove s_ctrl and g_ctrl

If we do not implement these callbacks the framework will call the
ext_ctrl callbaks instead, which are a superset of this functions.

Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: v4l2-ioctl: S_CTRL output the right value

If the driver does not implement s_ctrl, but it does implement
s_ext_ctrls, we convert the call.

When that happens we have also to convert back the response from
s_ext_ctrls.

Fixes v4l2_compliance:
Control ioctls (Input 0):
fail: v4l2-test-controls.cpp(411): returned control value out of range
fail: v4l2-test-controls.cpp(507): invalid control 00980900
test VIDIOC_G/S_CTRL: FAIL

Fixes: 35ea11ff8471 ("V4L/DVB (8430): videodev: move some functions from v4l2-dev.h to v4l2-common.h or v4l2-ioctl.h")
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: uvcvideo: Do not check for V4L2_CTRL_WHICH_DEF_VAL

The framework already checks for us if V4L2_CTRL_WHICH_DEF_VAL is
written.

Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: pvrusb2: Do not check for V4L2_CTRL_WHICH_DEF_VAL

The framework already checks for us if V4L2_CTRL_WHICH_DEF_VAL is
written.

Cc: Mike Isely <isely@pobox.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: v4l2-ioctl: Fix check_ext_ctrls

Drivers that do not use the ctrl-framework use this function instead.

Fix the following issues:

- Do not check for multiple classes when getting the DEF_VAL.
- Return -EINVAL for request_api calls
- Default value cannot be changed, return EINVAL as soon as possible.
- Return the right error_idx
[If an error is found when validating the list of controls passed with
VIDIOC_G_EXT_CTRLS, then error_idx shall be set to ctrls->count to
indicate to userspace that no actual hardware was touched.
It would have been much nicer of course if error_idx could point to the
control index that failed the validation, but sadly that's not how the
API was designed.]

Fixes v4l2-compliance:
Control ioctls (Input 0):
        warn: v4l2-test-controls.cpp(834): error_idx should be equal to count
        warn: v4l2-test-controls.cpp(855): error_idx should be equal to count
fail: v4l2-test-controls.cpp(813): doioctl(node, VIDIOC_G_EXT_CTRLS, &ctrls)
test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
Buffer ioctls (Input 0):
fail: v4l2-test-buffers.cpp(1994): ret != EINVAL && ret != EBADR && ret != ENOTTY
test Requests: FAIL

Cc: stable@vger.kernel.org
Fixes: 6fa6f831f095 ("media: v4l2-ctrls: add core request support")
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: uvcvideo: Remove unused including <linux/version.h>

Remove including <linux/version.h> that don't need it.

V1->V2: Split the patch in two.

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: document that Imgu not output auto-exposure statistics

Currently, Imgu can not support output the auto-exposure statistics into
ae_raw_buffer in 3A stats buffer, this patch document it.

Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: v4l2-ctrls: Document V4L2_CID_NOTIFY_GAINS control

Add documentation for the V4L2_CID_NOTIFY_GAINS control.

This control is required by sensors that need to know what colour
gains will be applied to pixels by downstream processing (such as by
an ISP), though the sensor does not apply these gains itself.

Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: v4l2-ctrls: Add V4L2_CID_NOTIFY_GAINS control

We add a new control V4L2_CID_NOTIFY_GAINS which allows the sensor to
be notified what gains will be applied to the different colour
channels by subsequent processing (such as by an ISP), even though the
sensor will not apply any of these gains itself.

For Bayer sensors this will be an array control taking 4 values which
are the 4 gains arranged in the fixed order B, Gb, Gr and R,
irrespective of the exact Bayer order of the sensor itself. The use of
an array makes it straightforward to extend this control to non-Bayer
sensors (for example, sensors with an RGBW pattern) in future.

The units are in all cases linear with the default value indicating a
gain of exactly 1.0. For example, if the default value were reported as
128 then the value 192 would represent a gain of exactly 1.5.

Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: ov8856: Set default mbus format but allow caller to alter

Setting the value of V_WIN_OFF (0x3818) from 0x02 to 0x01 to use GRBG
format still results in wrong color output if data is tuned in BGGR mode
before.

Set default mbus format for the supported modes, but allow the caller of
set(get)_fmt to change the bayer format between BGGR and GRBG.

Set the default mbus format for 3264x2448 (and 1632x1224) to BGGR as the
data sheet states the value of this reg should be 0x02 by default.

If new modes are added in the future, they can add the
mipi_data_mbus_{format} settings into bayer_offset_configs to adjust their
offset regs.

Fixes: 2984b0ddd557 ("media: ov8856: Configure sensor for GRBG Bayer for all modes")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: Add sensor driver support for the ov13b10 camera.

This driver supports following features:

- phase detection auto focus (PDAF)
- manual exposure and analog/digital gain control
- vblank/hblank control
- test pattern
- image vertical flip and horizontal mirror control
- 4208x3120 at 30FPS
- 2080x1170 at 60FPS

Signed-off-by: Arec Kao <arec.kao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: imx258: Fix getting clock frequency

Obtain the clock frequency by reading the clock-frequency property if
there's no clock.

Fixes: 9fda25332c4b ("media: i2c: imx258: get clock from device properties and enable it via runtime PM")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: ipu3-cio2: Introduce to_cio2_device() helper macro

Provide to_cio2_device() helper macro and convert users to make
code easier to read.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: ipu3-cio2: Introduce to_cio2_buffer() helper macro

Provide to_cio2_buffer() helper macro and convert users to make
code easier to read.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: ipu3-cio2: Introduce to_sensor_asd() helper macro

Provide to_sensor_asd() helper macro and convert users to make
code easier to read.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: ipu3-cio2: Switch to use media_entity_to_video_device()

V4L2 provides a few helper macros, in particular
media_entity_to_video_device(). Switch the driver
to use it instead of open-coded variant.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: ipu3-cio2: Use temporary storage for struct device pointer

Use temporary storage for struct device pointer to simplify the code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: ipu3-cio2: Replace open-coded for_each_set_bit()

Use for_each_set_bit() instead of open-coding it to simplify the code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging/intel-ipu3: css: Fix wrong size comparison imgu_css_fw_init

There is a wrong comparison of the total size of the loaded firmware
css->fw->size with the size of a pointer to struct imgu_fw_header.

Turn binary_header into a flexible-array member[1][2], use the
struct_size() helper and fix the wrong size comparison. Notice
that the loaded firmware needs to contain at least one 'struct
imgu_fw_info' item in the binary_header[] array.

It's also worth mentioning that

"css->fw->size < struct_size(css->fwp, binary_header, 1)"

with binary_header declared as a flexible-array member is equivalent
to

"css->fw->size < sizeof(struct imgu_fw_header)"

with binary_header declared as a one-element array (as in the original
code).

The replacement of the one-element array with a flexible-array member
also helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Fixes: 09d290f0ba21 ("media: staging/intel-ipu3: css: Add support for firmware management")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: ipu3.rst: Improve header formatting on tables

Use the header-rows option of the flat-table directive in order to have
the first row displayed as a header. Also capitalize these headers.
These changes make the tables easier to read.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: stm32: Potential NULL pointer dereference in dcmi_irq_thread()

At the moment of enabling irq handling:

1922 ret = devm_request_threaded_irq(&pdev->dev, irq, dcmi_irq_callback,
1923 dcmi_irq_thread, IRQF_ONESHOT,
1924 dev_name(&pdev->dev), dcmi);

there is still uninitialized field sd_format of struct stm32_dcmi *dcmi.
If an interrupt occurs in the interval between the installation of the
interrupt handler and the initialization of this field, NULL pointer
dereference happens.

This field is dereferenced in the handler function without any check:

457 if (dcmi->sd_format->fourcc == V4L2_PIX_FMT_JPEG &&
458     dcmi->misr & IT_FRAME) {

The patch moves interrupt handler installation
after initialization of the sd_format field that happens in
dcmi_graph_notify_complete() via dcmi_set_default_fmt().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Dmitriy Ulitin <ulitin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: m5602_ov7660: remove the repeated declaration

Function 'ov7660_init' is declared twice, remove the repeated
declaration.

Cc: Erik Andren <erik.andren@gmail.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dt-bindings: media: renesas,imr: Convert to json-schema

Convert the Renesas R-Car Image Renderer Device Tree binding
documentation to json-schema.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: atomisp: fix the uninitialized use in gc2235_detect()

Inside function gc2235_detect(), variable "low" could be uninitialized
if ov5693_read_reg() returns error, however, it affects the value of
variable "id". The "id" is used in the later if statement, which is
potentially unsafe.

Link: https://lore.kernel.org/linux-media/20210711202334.27959-1-yzhai003@ucr.edu
Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: atomisp: Fix error handling in probe

There were several issues with handling errors in lm3554_probe():
- Probe did not set the error code when v4l2_ctrl_handler_init() failed.
- It intermixed gotos for handling errors of v4l2_ctrl_handler_init()
  and media_entity_pads_init().
- It did not set the error code for failures of v4l2_ctrl_new_custom().
- Probe did not free resources in case of failures of
  atomisp_register_i2c_module().

The patch fixes all these issues.

Found by Linux Driver Verification project (linuxtesting.org).

Link: https://lore.kernel.org/linux-media/20210810162943.19852-1-novikov@ispras.ru
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: atomisp: restore missing 'return' statement

The input_system_configure_channel_sensor() function lost its final
return code in a previous patch:

drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c: In function 'input_system_configure_channel_sensor':
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:1649:1: error: control reaches end of non-void function [-Werror=return-type]

Restore what was there originally.

Link: https://lore.kernel.org/linux-media/20210802143820.1150099-1-arnd@kernel.org
Fixes: 728a5c64ae5f ("media: atomisp: remove dublicate code")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: netup_unidvb: handle interrupt properly according to the firmware

The interrupt handling should be related to the firmware version. If
the driver matches an old firmware, then the driver should not handle
interrupt such as i2c or dma, otherwise it will cause some errors.

This log reveals it:

[   27.708641] INFO: trying to register non-static key.
[   27.710851] The code is fine but needs lockdep annotation, or maybe
[   27.712010] you didn't initialize this object before use?
[   27.712396] turning off the locking correctness validator.
[   27.712787] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty #169
[   27.713349] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[   27.714149] Call Trace:
[   27.714329]  <IRQ>
[   27.714480]  dump_stack+0xba/0xf5
[   27.714737]  register_lock_class+0x873/0x8f0
[   27.715052]  ? __lock_acquire+0x323/0x1930
[   27.715353]  __lock_acquire+0x75/0x1930
[   27.715636]  lock_acquire+0x1dd/0x3e0
[   27.715905]  ? netup_i2c_interrupt+0x19/0x310
[   27.716226]  _raw_spin_lock_irqsave+0x4b/0x60
[   27.716544]  ? netup_i2c_interrupt+0x19/0x310
[   27.716863]  netup_i2c_interrupt+0x19/0x310
[   27.717178]  netup_unidvb_isr+0xd3/0x160
[   27.717467]  __handle_irq_event_percpu+0x53/0x3e0
[   27.717808]  handle_irq_event_percpu+0x35/0x90
[   27.718129]  handle_irq_event+0x39/0x60
[   27.718409]  handle_fasteoi_irq+0xc2/0x1d0
[   27.718707]  __common_interrupt+0x7f/0x150
[   27.719008]  common_interrupt+0xb4/0xd0
[   27.719289]  </IRQ>
[   27.719446]  asm_common_interrupt+0x1e/0x40
[   27.719747] RIP: 0010:native_safe_halt+0x17/0x20
[   27.720084] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6
[   27.721386] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246
[   27.721758] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
[   27.722262] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6
[   27.722770] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001
[   27.723277] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408
[   27.723781] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000
[   27.724289]  default_idle+0x9/0x10
[   27.724537]  arch_cpu_idle+0xa/0x10
[   27.724791]  default_idle_call+0x6e/0x250
[   27.725082]  do_idle+0x1f0/0x2d0
[   27.725326]  cpu_startup_entry+0x18/0x20
[   27.725613]  start_secondary+0x11f/0x160
[   27.725902]  secondary_startup_64_no_verify+0xb0/0xbb
[   27.726272] BUG: kernel NULL pointer dereference, address: 0000000000000002
[   27.726768] #PF: supervisor read access in kernel mode
[   27.727138] #PF: error_code(0x0000) - not-present page
[   27.727507] PGD 8000000118688067 P4D 8000000118688067 PUD 10feab067 PMD 0
[   27.727999] Oops: 0000 [#1] PREEMPT SMP PTI
[   27.728302] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty #169
[   27.728861] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[   27.729660] RIP: 0010:netup_i2c_interrupt+0x23/0x310
[   27.730019] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02
[   27.731339] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046
[   27.731716] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000
[   27.732223] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8
[   27.732727] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001
[   27.733239] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000
[   27.733745] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400
[   27.734251] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[   27.734821] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   27.735228] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0
[   27.735735] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   27.736241] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   27.736744] Call Trace:
[   27.736924]  <IRQ>
[   27.737074]  netup_unidvb_isr+0xd3/0x160
[   27.737363]  __handle_irq_event_percpu+0x53/0x3e0
[   27.737706]  handle_irq_event_percpu+0x35/0x90
[   27.738028]  handle_irq_event+0x39/0x60
[   27.738306]  handle_fasteoi_irq+0xc2/0x1d0
[   27.738602]  __common_interrupt+0x7f/0x150
[   27.738899]  common_interrupt+0xb4/0xd0
[   27.739176]  </IRQ>
[   27.739331]  asm_common_interrupt+0x1e/0x40
[   27.739633] RIP: 0010:native_safe_halt+0x17/0x20
[   27.739967] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6
[   27.741275] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246
[   27.741647] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
[   27.742148] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6
[   27.742652] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001
[   27.743154] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408
[   27.743652] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000
[   27.744157]  default_idle+0x9/0x10
[   27.744405]  arch_cpu_idle+0xa/0x10
[   27.744658]  default_idle_call+0x6e/0x250
[   27.744948]  do_idle+0x1f0/0x2d0
[   27.745190]  cpu_startup_entry+0x18/0x20
[   27.745475]  start_secondary+0x11f/0x160
[   27.745761]  secondary_startup_64_no_verify+0xb0/0xbb
[   27.746123] Modules linked in:
[   27.746348] Dumping ftrace buffer:
[   27.746596]    (ftrace buffer empty)
[   27.746852] CR2: 0000000000000002
[   27.747094] ---[ end trace ebafd46f83ab946d ]---
[   27.747424] RIP: 0010:netup_i2c_interrupt+0x23/0x310
[   27.747778] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02
[   27.749082] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046
[   27.749461] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000
[   27.749966] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8
[   27.750471] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001
[   27.750976] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000
[   27.751480] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400
[   27.751986] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[   27.752560] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   27.752970] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0
[   27.753481] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   27.753984] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   27.754487] Kernel panic - not syncing: Fatal exception in interrupt
[   27.755033] Dumping ftrace buffer:
[   27.755279]    (ftrace buffer empty)
[   27.755534] Kernel Offset: disabled
[   27.755785] Rebooting in 1 seconds..

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: cxd2820r: include the right header

This driver is just using <gpio/driver.h> so include that and
not the legacy <linux/gpio.h> header.

Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: siano: use DEFINE_MUTEX() for mutex lock

mutex lock can be initialized with DEFINE_MUTEX() rather than
explicitly calling mutex_init().

Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rc: clean the freed urb pointer to avoid double free

After freed rx_urb, we should set the second interface urb to NULL,
otherwise a double free would happen when the driver is removed
from the first interface.

Signed-off-by: Nil Yi <teroincn@163.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dvb-usb: fix ununit-value in az6027_rc_query

Syzbot reported ununit-value bug in az6027_rc_query(). The problem was
in missing state pointer initialization. Since this function does nothing
we can simply initialize state to REMOTE_NO_KEY_PRESSED.

Reported-and-tested-by: syzbot+2cd8c5db4a85f0a04142@syzkaller.appspotmail.com
Fixes: 76f9a820c867 ("V4L/DVB: AZ6027: Initial import of the driver")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: c8sectpfe-dvb: Remove unused including <linux/version.h>

Remove including <linux/version.h> that don't need it.

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: ir_toy: allow tx carrier to be set

The ir_toy allows the transmit carrier to be specified.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-vcodec: fix warnings: symbol XXX was not declared

Fixes sparse warnings:
- warning: symbol 'mtk_vdec_8173_pdata' was not declared. Should it be
static?
- warning: symbol 'mtk_vdec_8183_pdata' was not declared. Should it be
static?

Link: https://lore.kernel.org/linux-media/20210809131940.2890108-1-tzungbi@google.com
Cc: linux-mediatek@lists.infradead.org, linux-media@vger.kernel.org, linux-arm-kernel@lists.infradead.org, tzungbi@google.com # X-LSpam-Score: -10.7 (----------)
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-vcodec: enable MT8183 decoder

Now that all the supporting blocks are present, enable decoder for
MT8183.

[acourbot: refactor, cleanup and split]

Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dt-bindings: media: document mediatek,mt8183-vcodec-dec

MT8183's decoder is instantiated similarly to MT8173's.

Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-vcodec: vdec: add media device if using stateless api

The stateless API requires a media device for issuing requests. Add one
if we are being instantiated as a stateless decoder.

[acourbot: refactor, cleanup and split]
[tzungbi: fix wrong device minor number reference]

Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-vcodec: vdec: support stateless H.264 decoding

Add support for H.264 decoding using the stateless API, as supported by
MT8183. This support takes advantage of the V4L2 H.264 reference list
builders.

[acourbot: refactor, cleanup and split]
[tzungbi: fix missing kerneldoc issue]
[hverkuil: fix trivial kerneldoc typo]

Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-vcodec: vdec: support stateless API

Support the stateless codec API that will be used by MT8183.

[acourbot: refactor, cleanup and split]

Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: add Mediatek's MM21 format

Add Mediatek's non-compressed 8 bit block video mode. This format is
produced by the MT8183 codec and can be converted to a non-proprietary
format by the MDP3 component.

Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-vcodec: support version 2 of decoder firmware ABI

Add support for decoder firmware version 2, which makes the kernel
responsible for managing the VSI context and is used for stateless
codecs.

Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-vcodec: vdec: handle firmware version field

Firmwares for decoders newer than MT8173 will include an ABI version
number in their initialization ack message. Add the capacity to manage
it and make initialization fail if the firmware ABI is of a version that
we don't support.

For MT8173, this ABI version field does not exist ; thus ignore it on
this chip. There should only be one firmware version available for it
anyway.

Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-vcodec: vdec: move stateful ops into their own file

We are planning to add support for stateless decoders to this driver.
Part of the driver will be shared between stateful and stateless
codecs, but a few ops need to be specialized for both. Extract the
stateful part of the driver and move it into its own file, accessible
through ops that the common driver parts can call.

This patch only moves code around and introduces a set of abstractions ;
the behavior of the driver should not be changed in any way. Changes to
code styling has been done to accommodate 'checkpatch.pl --strict'.

[acourbot: refactor, cleanup and split]
[tzungbi: fix errors from 'checkpatch.pl --strict']

Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-vcodec: venc: support START and STOP commands

The V4L2 encoder specification requires encoders to support the
V4L2_ENC_CMD_START and V4L2_ENC_CMD_STOP commands. Add support for these
to the mtk-vcodec encoder by reusing the same flush buffer as used by
the decoder driver.

[hsinyi: fix double-free issue if flush buffer was not dequeued by the
time streamoff is called]

Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-vcodec: make flush buffer reusable by encoder

The flush buffer is a special buffer that tells the decoder driver to
send an empty CAPTURE frame to the client with V4L2_BUF_FLAG_LAST set.

We need similar functionality for the encoder ; however currently the
flush buffer depends on decoder-specific structures and thus cannot be
reused with the encoder.

Fix this by testing for this buffer by its VB2 address, and not through
a dedicated flag stored in a higher-level decoder structure. This also
allows us to remove said flag and simplify the code a bit.

Since the flush buffer should never be used in the stateless decoder,
also add safeguards to check against it.

Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-vcodec: vdec: clamp OUTPUT resolution to hardware limits

Calling S_FMT or TRY_FMT on the OUTPUT queue should adjust the
resolution to the limits supported by the hardware. Until now this was
only done on the CAPTURE queue, which could make clients believe that
unsupported resolutions can be used when they set the coded size on the
OUTPUT queue.

In the case of the stateless decoder, the problem was even bigger since
subsequently calling G_FMT on the CAPTURE queue would result in the
unclamped resolution being returned, further inducing the client into
error.

Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-vcodec: vdec: use helpers in VIDIOC_(TRY_)DECODER_CMD

Let's use the dedicated helpers to make sure we get the expected
behavior and remove redundant code.

Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-vcodec: vdec: Support H264 profile control

Add H264 profiles supported by the MediaTek 8173 decoder.

[acourbot: fix commit log a bit, move to mtk_vcodec_dec.c]

Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: tuners: mxl5007t: Removed unnecessary 'return'

Removed unnecessary 'return'.

Signed-off-by: lijian <lijian@yulong.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: ttusb-dec: avoid release of non-acquired mutex

ttusb_dec_send_command() invokes mutex_lock_interruptible() that can
fail but then it releases the non-acquired mutex. The patch fixes that.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: dba328bab4c6 ("media: ttusb-dec: cleanup an error handling logic")
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: cxd2880-spi: Fix a null pointer dereference on error handling path

Currently the null pointer check on dvb_spi->vcc_supply is inverted and
this leads to only null values of the dvb_spi->vcc_supply being passed
to the call of regulator_disable causing null pointer dereferences.
Fix this by only calling regulator_disable if dvb_spi->vcc_supply is
not null.

Addresses-Coverity: ("Dereference after null check")

Fixes: dcb014582101 ("media: cxd2880-spi: Fix an error handling path")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: streamzap: ensure rx resolution can be retrieved

The receiver resolution is not populated. The resolution can be used to for
various purposes like calculating the margins the decoder should use.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mceusb: ensure rx resolution can be retrieved

The receiver resolution is not populated. The resolution can be used to for
various purposes like calculating the margins the decoder should use.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: Clean V4L2_PIX_FMT_NV12MT documentation

Add more information about V4L2_PIX_FMT_NV12MT and
V4L2_PIX_FMT_NV12M_16X16, so it's clearer for driver authors and users.

Also, group the two pixel formats with the other tiled formats,
for clarity.

Unlike the recently introduced tiled formats (V4L2_PIX_FMT_NV12_4L4, etc)
these formats have remained Samsung-specific until now. Therefore, and
although the NV12MT and NV12MT_16X16 nomenclatures are less clear, we are
keeping them as-is.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: Add NV12_4L4 tiled format

This format is produced by VeriSilicon Hantro G2 and VC8000D cores.
It is a simple 4x4 tiling layout in a linear way.

The pixel format was introduced by GStreamer using FourCC VT12,
so let's stick to it.

Link: https://gstreamer.freedesktop.org/documentation/video/video-format.html
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: Rename V4L2_PIX_FMT_HM12 to V4L2_PIX_FMT_NV12_16L16

The V4L2_PIX_FMT_HM12 format is actually a simple NV12 tiled format,
with 16x16 linear tiles. Rename the format and move its documentation
together with the other tiled NV12 formats.

Keep V4L2_PIX_FMT_HM12 for application compatibility.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: Rename V4L2_PIX_FMT_SUNXI_TILED_NV12 to V4L2_PIX_FMT_NV12_32L32

The V4L2_PIX_FMT_SUNXI_TILED_NV12 format is actually a fairly
common NV12 tiled format, with 32x32 linear tiles. Rename the format
and move its documentation together with the other tiled NV12 formats.

Keep V4L2_PIX_FMT_SUNXI_TILED_NV12 for application compatibility.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-vcodec: Add MT8195 H264 venc driver

Add MT8195 venc driver's compatible and device private data.

Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dt-bindings: media: mtk-vcodec: Add binding for MT8195 VENC

Updates binding document for mt8195 encoder driver.

Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-vcodec: Clean redundant encoder format definition

The supported capture/output formats don't depend on models,
clean redundant definitions and naming with type instead.

Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: gspca/sn9c20x: Add ability to control built-in webcam LEDs

If you image search "microdia sonix webcam", or SN9C120, you can find
 examples of the type of webcam I have. It has 6 built-in LEDs.
It's ancient (2006 maybe?) but in 2020 it was the only USB webcam I had.
It doesn't perform well, especially in low light.

The Windows XP drivers had the ability to toggle the LEDs, as well as
 "Auto" mode which would read and adjust the exposure and turn them
 on when it got "too dark", along with other nice features, like
 smoothing dead pixels, funky filters, effects and face tracking.

Watching Wireshark usbmon with the Windows driver I was able to discover
 which values are required to toggle the LEDs.

Reading ext-ctrls-flash.rst, V4L2_FLASH_LED_MODE_TORCH seems to describe
 mostly what I want it to do.
Ideally the control would be boolean/checkbox, but the existing
 implementation seems to require a menu.

This patch implements the ability to control the LEDs, attempting to
 minimise changes to external files and other webcams.

Review by anyone more familiar with the code base for unintended
 side effects would be welcome and appreciated. First kernel submission.

Signed-off-by: Pete Hemery <petehemery@hotmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: meson-ge2d: Fix rotation parameter changes detection in 'ge2d_s_ctrl()'

There is likely a typo here. To be consistent, we should compare
'fmt.height' with 'ctx->out.pix_fmt.height', not 'ctx->out.pix_fmt.width'.

Instead of fixing the test, just remove it and copy 'fmt' unconditionally.

Fixes: 59a635327ca7 ("media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: TDA1997x: fix tda1997x_remove()

TDA1997x driver tried to hold two values in a single variable:
device's "client data" pointer was first set to "sd" in
v4l2_i2c_subdev_init(), then it was overwritten explicitly
using dev_set_drvdata() with "state". This caused
tda1997x_remove() to fail badly.

Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: em28xx: add missing em28xx_close_extension

If em28xx dev has ->dev_next pointer, we need to delete ->dev_next list
node from em28xx_extension_devlist on disconnect to avoid UAF bugs and
corrupted list bugs, since driver frees this pointer on disconnect.

Reported-and-tested-by: syzbot+a6969ef522a36d3344c9@syzkaller.appspotmail.com
Fixes: 1a23f81b7dc3 ("V4L/DVB (9979): em28xx: move usb probe code to a proper place")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: videobuf2-core: sanity checks for requests and qbuf

The combination of supports_requests == 1 and min_buffers_needed > 0
is not allowed, WARN on that and return an error.

Also check that if vb2_core_qbuf() is called from req_queue, that it
doesn't return an error, unless it is -EIO.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: vivid: add module option to set request support mode

Currently vivid supports the Request API, but it also sets
min_buffers_needed in the vb2 queue. But the combination of
support_requests and min_buffers_needed is not allowed due to
the fact that vb2_core_qbuf() isn't supposed to fail when called
from the request framework. And if min_buffers_needed > 0, then
is can call start_streaming() which definitely can fail.

With the new module option you can control if requests are not
allowed (min_buffers_needed is 2 in that case), optionally allowed
or are required. In the latter two cases min_buffers_needed is set
to 0.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: cedrus: drop min_buffers_needed.

There is no reason for the cedrus driver to set min_buffers_needed.
A non-zero min_buffers_needed can cause problems with the Request API
if start_streaming fails when queueing a buffer from a request.

Since it is not needed for this driver, just remove it.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>