OSDN Git Service
Olof Johansson [Thu, 24 Jun 2021 02:00:04 +0000 (19:00 -0700)]
Merge tag 'v5.14-rockchip-dts64-1' of git://git./linux/kernel/git/mmind/linux-rockchip into arm/dt
A lot of dt-yaml related fixes; PCIe, USB and pwm-fans for Helios64;
Display rotation and audio codec for the Odroid Go Advance;
IR, spdif and usb-c support for rk3399-firefly;
USB support for rk3308 and some rk3328 boards and setting
the PCIe link speed to actually only supported speed on rk3399.
* tag 'v5.14-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (30 commits)
arm64: dts: rockchip: Re-add regulator-always-on for vcc_sdio for rk3399-roc-pc
arm64: dts: rockchip: Re-add regulator-boot-on, regulator-always-on for vdd_gpu on rk3399-roc-pc
arm64: dts: rockchip: add ir-receiver for rk3399-roc-pc
arm64: dts: rockchip: Add USB-C port details for rk3399 Firefly
arm64: dts: rockchip: Sort rk3399 firefly pinmux entries
arm64: dts: rockchip: add infrared receiver node to RK3399 Firefly
arm64: dts: rockchip: add SPDIF node for rk3399-firefly
arm64: dts: rockchip: Add Rotation Property for OGA Panel
arm64: dts: rockchip: Add support for USB on helios64
arm64: dts: rockchip: add USB support to rk3308.dtsi
arm64: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
arm64: dts: rockchip: add rk817 codec to Odroid Go
arm64: dts: rename grf-gpio nodename in rk3328.dtsi
arm64: dts: rockchip: Add support for PCIe on helios64
arm64: dts: rockchip: Add support for two PWM fans on helios64
arm64: dts: rockchip: fix regulator-gpio states array
arm64: dts: rockchip: add #power-domain-cells to power domain nodes
arm64: dts: rockchip: Fix power-controller node names for rk3399
arm64: dts: rockchip: Fix power-controller node names for rk3328
arm64: dts: rockchip: Fix power-controller node names for px30
...
Link: https://lore.kernel.org/r/2796982.e9J7NaK4W3@phil
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 24 Jun 2021 01:58:56 +0000 (18:58 -0700)]
Merge tag 'v5.14-rockchip-dts32-1' of git://git./linux/kernel/git/mmind/linux-rockchip into arm/dt
A lot of fixes related to the dt-binding yaml conversion,
power-domain additions for rk322x and rk3036 and the missing
mmc aliases move to board files on rk3066/rk3188.
* tag 'v5.14-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add power controller for RK322x
ARM: dts: rockchip: add power controller for RK3036
ARM: dts: rockchip: add labels to the timer nodes on rk3066a
ARM: dts: rockchip: fix supply properties in io-domains nodes
ARM: dts: rockchip: remove #phy-cells from usbphy node rk3066/rk3188
ARM: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
ARM: dts: rockchip: move mmc aliases to board dts on rk3066/rk3188
ARM: dts: rockchip: move and restyle grf nodes rk3066/rk3188
ARM: dts: rockchip: rename vcc_stdby node name for rk3066a-rayeager.dts
ARM: dts: rockchip: Remove more clock-names from PWM nodes
ARM: dts: rockchip: add #power-domain-cells to power domain nodes
ARM: dts: rockchip: Fix power-controller node names for rk3288
ARM: dts: rockchip: Fix power-controller node names for rk3188
ARM: dts: rockchip: Fix power-controller node names for rk3066a
ARM: dts: rockchip: Remove useless interrupt-names on IOMMU node on rk3036
ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x
ARM: dts: rockchip: Fix the timer clocks order
ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288
ARM: dts: rockchip: Fix thermal sensor cells o rk322x
Link: https://lore.kernel.org/r/2084346.irdbgypaU6@phil
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 24 Jun 2021 01:57:53 +0000 (18:57 -0700)]
Merge tag 'mvebu-dt64-5.14-1' of git://git./linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt64 for 5.14 (part 1)
on Armada 3700:
Move turris-mox-rwtm firmware node to a more generic place
on AP807:
Make SD/MMC controller still usbale with older kernel
CP11x:
update comphy references
cn9130:
Improve NAND partitioning scheme for cn9130-db
* tag 'mvebu-dt64-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arch/arm64/boot/dts/marvell: fix NAND partitioning scheme
Documentation/bindings: phy: update references to cp11x
arm64: dts: ensure backward compatibility of the AP807 Xenon
arm64: dts: marvell: armada-37xx: move firmware node to generic dtsi file
Link: https://lore.kernel.org/r/878s3429zi.fsf@BL-laptop
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 24 Jun 2021 01:49:10 +0000 (18:49 -0700)]
Merge tag 'ti-k3-dt-for-v5.14' of git://git./linux/kernel/git/nmenon/linux into arm/dt
Devicetree changes for TI K3 platforms for v5.14 merge window:
* New features:
- AM64 gains PCIe and USB3 for am64-sk board, R5 remote proc (includes
AM64 rproc bindings tag from Bjorn's tree)
- AM65, J721e gains ICSSG MDIO nodes
- AM65: UHS mode speed enabled on am65
* Fixes:
- Fixups on AM64 SRAM model thanks to a ROM bug for USB DFU mode
- Schema related cleanups across j7*, am65, 64
- Few misc Fixups on AM64 where MAC address could conflict; j7200 for
USB2 Rx sensitivity etc.
* tag 'ti-k3-dt-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (37 commits)
arm64: dts: ti: k3-am642-evm/sk: Add DDR carveout memory nodes for R5Fs
arm64: dts: ti: k3-am642-evm/sk: Add mailboxes to R5Fs
arm64: dts: ti: k3-am64-main: Add MAIN domain R5F cluster nodes
arm64: dts: ti: k3-am64-main: Update TF-A load address to workaround USB DFU limitation
arm64: dts: ti: k3-am64-main: Reserve OCMRAM for DMSC-lite and secure proxy communication
arm64: dts: ti: k3-am64-main: Update TF-A's maximum size and node name
arm64: dts: ti: Drop reg-io-width/reg-shift from UART nodes
arm64: dts: ti: k3-am642-evm: align ti,pindir-d0-out-d1-in property with dt-shema
arm64: dts: ti: am65: align ti,pindir-d0-out-d1-in property with dt-shema
arm64: dts: ti: k3-am642-main: fix ports mac properties
arm64: dts: ti: iot2050: Configure r5f cluster on basic variant in split mode
arm64: dts: ti: k3-am642-sk: Disable PCIe
arm64: dts: ti: k3-am642-sk: Enable USB Super-Speed HOST port
arm64: dts: ti: k3-am642-evm: Enable PCIe and SERDES
arm64: dts: ti: k3-am64-main: Add PCIe DT node
arm64: dts: ti: k3-am64-main: Add SERDES DT node
arm64: dts: ti: k3-j721e-common-proc-board: Re-name "link" name as "phy"
arm64: dts: ti: k3-j721e-common-proc-board: Use external clock for SERDES
arm64: dts: ti: k3-j721e-main: Add #clock-cells property to serdes DT node
arm64: dts: ti: k3-j721e-main: Fix external refclk input to SERDES
...
Link: https://lore.kernel.org/r/20210619000150.6ooqnxxsnsvncs5u@pushchair
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 24 Jun 2021 01:46:19 +0000 (18:46 -0700)]
Merge tag 'omap-for-v5.14/dt-cleanup-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree binding clean-up for omaps for v5.14
Minor devicetree clean-up for omaps for the binding checks:
- Drop unsupported dmas for omap2/3 i2c
- Drop redundant ehrpwm compatible
- Drop am33xx-ecap compatible no longer needed
- Correct node names for ecap
- Drop unsupported interrupts for ecap
- Drop redundant ti,pcf8575
- Correct usage for ti,pindir-d0-out-d1-in
* tag 'omap-for-v5.14/dt-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am437x: align ti,pindir-d0-out-d1-in property with dt-shema
ARM: dts: am335x: align ti,pindir-d0-out-d1-in property with dt-shema
ARM: dts: dra7x-evm: Drop "ti,pcf8575"
ARM: dts: am33xx: Drop interrupt property from ecap nodes
ARM: dts: ti: Fix node name for all ecap dt nodes
ARM: dts: ti: Drop usage of ti,am33xx-ecap from DT nodes
ARM: dts: ti: drop usage of redundant compatible
ARM: dts: omap2/3: Drop dmas property from I2C node
Link: https://lore.kernel.org/r/pull-1624002812-396117@atomide.com-2
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 24 Jun 2021 01:44:05 +0000 (18:44 -0700)]
Merge tag 'hisi-arm64-dt-for-5.14' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: HiSilicon ARM64 DT updates for 5.14
- Correct the HiSilicon copyright
* tag 'hisi-arm64-dt-for-5.14' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: use the correct HiSilicon copyright
Link: https://lore.kernel.org/r/60CBF4AE.7040301@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 24 Jun 2021 01:35:15 +0000 (18:35 -0700)]
Merge tag 'hisi-arm32-dt-for-5.14' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM: DT: HiSilicon ARM32 DT updates for 5.14
- Correct the HiSilicon copyright
* tag 'hisi-arm32-dt-for-5.14' of git://github.com/hisilicon/linux-hisi:
ARM: dts: hisilicon: use the correct HiSilicon copyright
Link: https://lore.kernel.org/r/60CBF408.7040302@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Alex Bee [Sat, 19 Jun 2021 12:13:06 +0000 (14:13 +0200)]
arm64: dts: rockchip: Re-add regulator-always-on for vcc_sdio for rk3399-roc-pc
Re-add the regulator-always-on property for vcc_sdio which supplies sdmmc,
since it gets disabled during reboot now and the bootrom expects it to be
enabled when booting from SD card. This makes rebooting impossible in that
case and requires a hard reset to boot again.
Fixes:
04a0077fdb19 ("arm64: dts: rockchip: Remove always-on properties from regulator nodes on rk3399-roc-pc.")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210619121306.7740-1-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Alex Bee [Sat, 19 Jun 2021 12:14:46 +0000 (14:14 +0200)]
arm64: dts: rockchip: Re-add regulator-boot-on, regulator-always-on for vdd_gpu on rk3399-roc-pc
This might be a limitation of either the current panfrost driver
devfreq implementation or how the gpu is implemented in RK3399 SoC.
The gpu regulator must never get disabled or the registers get
(randomly?) inaccessable by the driver. (see all other RK3399 boards)
Fixes:
ec7d731d81e7 ("arm64: dts: rockchip: Add node for gpu on rk3399-roc-pc")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210619121446.7802-1-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Alex Bee [Sat, 19 Jun 2021 12:16:42 +0000 (14:16 +0200)]
arm64: dts: rockchip: add ir-receiver for rk3399-roc-pc
Like some other RK3399 boards RK3399-ROC-PC has an ir receiver
connected to pwm3 which can be used as gpio-ir-receiver.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210619121642.7892-1-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Peter Robinson [Sun, 13 Jun 2021 21:52:37 +0000 (22:52 +0100)]
arm64: dts: rockchip: Add USB-C port details for rk3399 Firefly
Add the initial details for the USB-C port.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20210613215237.830160-4-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Peter Robinson [Sun, 13 Jun 2021 21:52:36 +0000 (22:52 +0100)]
arm64: dts: rockchip: Sort rk3399 firefly pinmux entries
Sort the rk3399 firefly pinmux entries in alphabetical
order and de-dupe the pmic entries.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20210613215237.830160-3-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Peter Robinson [Sun, 13 Jun 2021 21:52:35 +0000 (22:52 +0100)]
arm64: dts: rockchip: add infrared receiver node to RK3399 Firefly
This adds the RK3399 Firefly’s infrared receiver to its dts.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20210613215237.830160-2-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Peter Robinson [Sun, 13 Jun 2021 21:52:34 +0000 (22:52 +0100)]
arm64: dts: rockchip: add SPDIF node for rk3399-firefly
This patch adds the SPDIF sound node and related settings
for rk3399-firefly.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20210613215237.830160-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Chris Morgan [Mon, 14 Jun 2021 16:18:49 +0000 (11:18 -0500)]
arm64: dts: rockchip: Add Rotation Property for OGA Panel
Add rotation property for Odroid Go Advance panel to note that it is
rotated 270 degrees. Rotation affects DRM connector after this patch:
https://cgit.freedesktop.org/drm/drm/commit/drivers/gpu/drm/panel/panel-elida-kd35t133.c?id=
610d9c311b1387f8c4ac602fee1f2a1cb0508707
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20210614161849.332-1-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Suman Anna [Tue, 15 Jun 2021 19:57:18 +0000 (14:57 -0500)]
arm64: dts: ti: k3-am642-evm/sk: Add DDR carveout memory nodes for R5Fs
Two carveout reserved memory nodes each have been added for each of the
R5F remote processor devices within the MAIN domain on the TI AM642 EVM
and SK boards. These nodes are assigned to the respective rproc device
nodes as well. The first region will be used as the DMA pool for the rproc
devices, and the second region will furnish the static carveout regions
for the firmware memory.
An additional reserved memory node is also added to reserve a portion of
the DDR memory to be used for performing inter-processor communication
between all the remote processors running RTOS or baremetal firmwares.
8 MB of memory is reserved for this purpose, and this accounts for all
the vrings and vring buffers between all the possible pairs of remote
processors.
The current carveout addresses and sizes are defined statically for each
rproc device. The R5F processors do not have an MMU, and as such require
the exact memory used by the firmwares to be set-aside. The firmware
images do not require any RSC_CARVEOUT entries in their resource tables
to allocate the memory for firmware memory segments.
NOTE:
1. The R5F1 carveouts are needed only if the R5F cluster is running in
Split (non Single-CPU) mode. The reserved memory nodes can be disabled
later on if there is no use-case defined to use the corresponding
remote processor.
2. The AM64x SoCs do not have any DSPs and one less R5F cluster compared
to J721E SoCs. So, while the carveout memories reserved for the R5F
clusters present on the SoC match to those on J721E, the overall
memory map reserved for firmwares is quite different. The number of
R5F clusters on AM64x SoCs are same as on J7200 SoCs, but the AM64x
SoCs also have an additional M4F core, so the RTOS IPC memory region
is 1 MB higher than on J7200 SoCs.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210615195718.15898-4-s-anna@ti.com
Suman Anna [Tue, 15 Jun 2021 19:57:17 +0000 (14:57 -0500)]
arm64: dts: ti: k3-am642-evm/sk: Add mailboxes to R5Fs
Add the required 'mboxes' property to all the R5F processors for the
TI AM642 EVM and SK boards. The mailboxes and some shared memory are
required for running the Remote Processor Messaging (RPMsg) stack
between the host processor and each of the R5Fs.
The chosen sub-mailboxes match the values used in the current firmware
images. This can be changed, if needed, as per the system integration
needs after making appropriate changes on the firmware side as well.
Note that any R5F Core1 resources are needed and used only when that
R5F cluster is configured for Split-mode.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210615195718.15898-3-s-anna@ti.com
Suman Anna [Tue, 15 Jun 2021 19:57:16 +0000 (14:57 -0500)]
arm64: dts: ti: k3-am64-main: Add MAIN domain R5F cluster nodes
The AM64x SoCs have 2 dual-core Arm Cortex-R5F processor (R5FSS)
subsystems/clusters. Both the R5F clusters are present within the
MAIN domain (MAIN_R5FSS0 & MAIN_R5FSS1). Each of these can be
configured at boot time to be either run in a new "Single-CPU" mode
or in an Asymmetric Multi Processing (AMP) fashion in Split-mode.
The mode is restricted to "Single-CPU" on some devices with the
appropriate eFuse bit set, but the most common devices support both
modes. These subsystems have 64 KB each Tightly-Coupled Memory (TCM)
internal memories for each core split between two banks - ATCM and
BTCM (further interleaved into two banks). The TCMs of both Cores
are combined in Single-CPU mode to provide a larger 128 KB of memory.
The other notable difference is that the TCMs are spaced 1 MB apart
on these SoCs unlike the existing SoCs.
Add the DT nodes for both these MAIN domain R5F cluster/subsystems,
the two R5F cores are added as child nodes to each of the corresponding
R5F cluster node. Both the clusters are configured to run in Split mode
by default, with the ATCMs enabled to allow the R5 cores to execute
code from DDR with boot-strapping code from ATCM. The inter-processor
communication between the main A72 cores and these processors is
achieved through shared memory and Mailboxes.
The following firmware names are used by default for these cores, and
can be overridden in a board dts file if desired:
MAIN R5FSS0 Core0: am64-main-r5f0_0-fw (both in Single-CPU & Split modes)
MAIN R5FSS0 Core1: am64-main-r5f0_1-fw (needed only in Split mode)
MAIN R5FSS1 Core0: am64-main-r5f1_0-fw (both in Single-CPU & Split modes)
MAIN R5FSS1 Core1: am64-main-r5f1_1-fw (needed only in Split mode)
NOTE:
A R5FSS cluster can be configured in "Single-CPU" mode by using a
value of 2 for the "ti,cluster-mode" property. Value of 1 is not
permitted (fails the dtbs_check).
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210615195718.15898-2-s-anna@ti.com
Nishanth Menon [Fri, 18 Jun 2021 14:41:44 +0000 (09:41 -0500)]
Merge tag '
20210327143117.1840-2-s-anna@ti.com' of git://git./linux/kernel/git/andersson/remoteproc into ti-k3-dts-next
v5.13-rc1 +
20210327143117.1840-2-s-anna@ti.com
* tag '
20210327143117.1840-2-s-anna@ti.com' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
dt-bindings: remoteproc: k3-r5f: Update bindings for AM64x SoCs
Signed-off-by: Nishanth Menon <nm@ti.com>
Konstantin Porotchkin [Tue, 9 Feb 2021 13:46:07 +0000 (15:46 +0200)]
arch/arm64/boot/dts/marvell: fix NAND partitioning scheme
Eliminate 1MB gap between Linux and filesystem partitions.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Grzegorz Jaszczyk [Tue, 9 Feb 2021 13:46:06 +0000 (15:46 +0200)]
Documentation/bindings: phy: update references to cp11x
The cp11x references in dts has changed, reflect it in comphy
documentation.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Marcin Wojtas [Mon, 22 Mar 2021 00:39:15 +0000 (01:39 +0100)]
arm64: dts: ensure backward compatibility of the AP807 Xenon
A recent switch to a dedicated AP807 compatible string for the Xenon
SD/MMC controller result in the driver not being probed when
using updated device tree with the older kernel revisions.
It may also be problematic for other OSs/firmware that use
Linux device tree sources as a reference. Resolve the problem
with backward compatibility by restoring a previous compatible
string as secondary one.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Pali Rohár [Thu, 20 May 2021 11:38:44 +0000 (13:38 +0200)]
arm64: dts: marvell: armada-37xx: move firmware node to generic dtsi file
Move the turris-mox-rwtm firmware node from Turris MOX' device tree into
the generic armada-37xx.dtsi file and use the generic compatible string
'marvell,armada-3700-rwtm-firmware' instead of the current one.
Turris MOX DTS file contains also old compatible string for backward
compatibility.
The Turris MOX rWTM firmware can be used on any Armada 37xx device,
giving them access to the rWTM hardware random number generator, which
is otherwise unavailable.
This change allows Linux to load the turris-mox-rwtm.ko module on these
boards.
Tested on ESPRESSObin v5 with both default Marvell WTMI firmware and
CZ.NIC's firmware. With default WTMI firmware the turris-mox-rwtm fails
to probe, while with CZ.NIC's firmware it registers the HW random number
generator.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Hao Fang [Sat, 22 May 2021 10:21:57 +0000 (18:21 +0800)]
ARM: dts: hisilicon: use the correct HiSilicon copyright
s/Hisilicon/HiSilicon/.
It should use capital S, according to the official website
https://www.hisilicon.com/en.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Hao Fang [Sat, 22 May 2021 10:20:32 +0000 (18:20 +0800)]
arm64: dts: hisilicon: use the correct HiSilicon copyright
s/Hisilicon/HiSilicon/.
It should use capital S, according to the official website
https://www.hisilicon.com/en.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Olof Johansson [Thu, 17 Jun 2021 00:33:11 +0000 (17:33 -0700)]
Merge tag 'amlogic-arm-dt-for-v5.14' of https://git./linux/kernel/git/amlogic/linux into arm/dt
Amlogic ARM DT changes for v5.14:
- Set the fifo-size of uart_A to 128 bytes like the ARM64 counterpart
* tag 'amlogic-arm-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: dts: meson: Set the fifo-size of uart_A to 128 bytes
Link: https://lore.kernel.org/r/2f19a5a1-3ed9-dd11-02f1-7d535cb1c25c@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 17 Jun 2021 00:32:50 +0000 (17:32 -0700)]
Merge tag 'amlogic-arm64-dt-for-v5.14-v2' of https://git./linux/kernel/git/amlogic/linux into arm/dt
Amlogic ARM64 DT changes for v5.14 round 2:
- various fixes for Odroid C4/HC4 regulators handling, USB and SPI NOR Flash for HC4
* tag 'amlogic-arm64-dt-for-v5.14-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: meson-sm1-odroid-c4: remove invalid hub_5v regulator
arm64: dts: meson-sm1-odroid-hc4: add spifc node to ODROID-HC4
arm64: dts: meson-sm1-odroid-hc4: add regulators controlled by GPIOH_8
arm64: dts: meson-sm1-odroid-hc4: disable unused USB PHY0
arm64: dts: meson-sm1-odroid: add 5v regulator gpio
arm64: dts: meson-sm1-odroid: set tf_io regulator gpio as open source
arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator
Link: https://lore.kernel.org/r/c953e97a-f901-a749-1fb6-b1caa75b4748@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Aswath Govindraju [Wed, 16 Jun 2021 17:12:24 +0000 (22:42 +0530)]
arm64: dts: ti: k3-am64-main: Update TF-A load address to workaround USB DFU limitation
Due to a limitation for USB DFU boot mode, SPL load address has to be less
than or equal to 0x70001000. So, load address of SPL and TF-A have been
moved to 0x70000000 and 0x701c0000 respectively, in U-Boot version 2021.10.
Therefore, update TF-A's location in the device tree node.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210616171224.24635-4-a-govindraju@ti.com
Aswath Govindraju [Wed, 16 Jun 2021 17:12:23 +0000 (22:42 +0530)]
arm64: dts: ti: k3-am64-main: Reserve OCMRAM for DMSC-lite and secure proxy communication
The final 128KB in SRAM is reserved by default for DMSC-lite code and
secure proxy communication buffer. The memory region used for DMSC-lite
code can be optionally freed up by secure firmware API[1]. However, the
buffer for secure proxy communication is not configurable. This default
hardware configuration is unique for AM64.
Therefore, indicate the area reserved for DMSC-lite code and secure proxy
communication buffer in the oc_sram device tree node.
[1] - http://downloads.ti.com/tisci/esd/latest/6_topic_user_guides/security_handover.html#triggering-security-handover
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210616171224.24635-3-a-govindraju@ti.com
Aswath Govindraju [Wed, 16 Jun 2021 17:12:22 +0000 (22:42 +0530)]
arm64: dts: ti: k3-am64-main: Update TF-A's maximum size and node name
The maximum size of TF-A 2.5 has been increased to 0x1c000 [1]. In order to
account for future expansions too, increase the allocated size for TF-A to
0x20000, in the device tree node.
Also, update the node name to "tfa-sram".
[1] - https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=
2fb5312f61a7de8b7a70e1639199c4f14a10b6f9
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210616171224.24635-2-a-govindraju@ti.com
Olof Johansson [Tue, 15 Jun 2021 16:48:08 +0000 (09:48 -0700)]
Merge tag 'mstar-dt-5.14' of git://github.com/linux-chenxing/linux into arm/dt
* tag 'mstar-dt-5.14' of git://github.com/linux-chenxing/linux:
ARM: dts: mstar: Add watchdog device node
Link: https://lore.kernel.org/r/CAFr9PXknSfSso6Uq0Fn_qJM5ZnJ4QK=YjJ32kKt4XYPrHK5x6w@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Romain Perier [Fri, 11 Jun 2021 20:08:01 +0000 (22:08 +0200)]
ARM: dts: mstar: Add watchdog device node
This adds the definition of both an oscillator at 12Mhz required by the
the watchdog and the watchdog device node.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Olof Johansson [Tue, 15 Jun 2021 15:37:29 +0000 (08:37 -0700)]
Merge tag 'tegra-for-5.14-arm64-dt' of git://git./linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.14-rc1
Contains changes to consolidate audio card names, adds audio support on
Jetson Xavier NX and enables SMMU on Tegra194.
* tag 'tegra-for-5.14-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Enable SMMU support on Tegra194
arm64: tegra: Hook up memory controller to SMMU on Tegra186
arm64: tegra: Use correct compatible string for Tegra186 SMMU
arm64: tegra: Audio graph sound card for Jetson Xavier NX
arm64: tegra: Consolidate audio card names
arm64: tegra: Add PMU node for Tegra194
Link: https://lore.kernel.org/r/20210611164437.3568059-6-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 15 Jun 2021 15:36:25 +0000 (08:36 -0700)]
Merge tag 'tegra-for-5.14-arm-dt' of git://git./linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Device tree changes for v5.14-rc1
This contains various improvements (such as microphone detection and
thermal zones) for some older Tegra devices (such as the Nexus 7 or
the Acer A500).
* tag 'tegra-for-5.14-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: ouya: Enable memory frequency thermal throttling using ACTMON
ARM: tegra: nexus7: Enable memory frequency thermal throttling using ACTMON
ARM: tegra: Add cooling cells to ACTMON device-tree node
ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variant
ARM: tegra: nexus7: Remove monitored-battery property
ARM: tegra: nexus7: Improve thermal zones
ARM: tegra: nexus7: Add i2c-thermtrip node
ARM: tegra: paz00: Add CPU thermal zone
ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-trees
ARM: tegra: Add reg property to Tegra20 EMC table device-tree nodes
ARM: tegra: acer-a500: Bump thermal trips by 10C
ARM: tegra: acer-a500: Specify proper voltage for WiFi SDIO bus
ARM: tegra: acer-a500: Improve microphone detection
Link: https://lore.kernel.org/r/20210611164437.3568059-4-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 15 Jun 2021 15:33:45 +0000 (08:33 -0700)]
Merge tag 'tegra-for-5.14-dt-bindings' of git://git./linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v5.14-rc1
This contains a conversion of the Tegra clock and reset controller
device tree bindings to the new json-schema format and adds the core
power domain to the PMC device tree bindings.
* tag 'tegra-for-5.14-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: soc: tegra-pmc: Document core power domain
dt-bindings: clock: tegra: Convert to schema
Link: https://lore.kernel.org/r/20210611164437.3568059-1-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 15 Jun 2021 15:18:09 +0000 (08:18 -0700)]
Merge tag 'visconti-arm-dt-for-v5.14' of https://git./linux/kernel/git/iwamatsu/linux-visconti into arm/dt
Visconti device tree updates for 5.14
- Add DT support for Toshiba Visconti5 PWM driver
* tag 'visconti-arm-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti:
arm64: dts: visconti: Add PWM support for TMPV7708 SoC
Link: https://lore.kernel.org/r/20210614234654.2u3xetnn5rwhymwz@toshiba.co.jp
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 15 Jun 2021 15:17:30 +0000 (08:17 -0700)]
Merge tag 'qcom-dts-for-5.14' of https://git./linux/kernel/git/qcom/linux into arm/dt
Qualcomm DTS updates for v5.14
This adds DMA, NAND controllers, USB controller and PHY, RPM, L2CC,
thermal sensors and defines thermal zones. It them enables these for the
RB3011.
* tag 'qcom-dts-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: Enable NAND + USB for RB3011
ARM: dts: qcom: add L2CC and RPM for IPQ8064
ARM: dts: qcom: Add USB port definitions to ipq806x
ARM: dts: qcom: Add tsens details to ipq806x
ARM: dts: qcom: Add ADM DMA + NAND definitions to ipq806x
Link: https://lore.kernel.org/r/20210614223840.393224-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 15 Jun 2021 15:14:57 +0000 (08:14 -0700)]
Merge tag 'qcom-arm64-for-5.14' of https://git./linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for v5.14
MSM8916 gains new support for Huawei Ascend G7, with NFC, sensors and
touchscreen. The Samsung Galaxy A3/A5 gains battery support, touch keys,
NFC.
MSM8996 received more cleanup and refactoring, preparing for upcoming
new devices. Note worthy is the long pending enablement of CPUfreq.
SC7180 continues to stabilize, with a range of small fixes for various
bits and pieces, and new revisions for the CoachZ and pompom devices.
SC7280 continues to grow, with more clock controllers, thermal sensors,
thermal zones, CPUfreq and interconnect providers.
Xiaomi Poco F1 gaines audio support and the OnePlus 6/6T gaines IPA
support.
SM8350 gains some cleanups and the IPA device is enabled.
Initial support for the Microsoft Surface Duo, based on SM8150, is
added.
IPQ8074 gained support for the HK10 board.
* tag 'qcom-arm64-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (85 commits)
arm64: dts: qcom: sc7180: Add xo clock for eMMC and Sd card
arm64: dts: sc7280: Add interconnect provider DT nodes
arm64: dts: qcom: msm8916-huawei-g7: Add NFC
arm64: dts: qcom: msm8916-huawei-g7: Add display regulator
arm64: dts: qcom: msm8916-huawei-g7: Add sensors
arm64: dts: qcom: msm8916-huawei-g7: Add touchscreen
arm64: dts: qcom: msm8916: Add device tree for Huawei Ascend G7
arm64: dts: qcom: sc7180-trogdor: Update flash freq to match reality
arm64: dts: qcom: sc7180: Add wakeup delay for adau codec
arm64: dts: qcom: sdm845: Remove cros-pd-update on Cheza
arm64: dts: qcom: sc7180: Remove cros-pd-update on Trogdor
arm64: dts: qcom: sc7180: Disable PON on Trogdor
arm64: dts: qcom: sc7180: Modify SPI_CLK voltage level for trogdor
arm64: dts: qcom: add initial device-tree for Microsoft Surface Duo
arm64: dts: qcom: sdm845-mtp: enable IPA
arm64: dts: qcom: sc7180: SD-card GPIO pin set bias-pull up
arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files
arm64: dts: qcom: msm8916-samsung-a2015: Add NFC
arm64: dts: qcom: msm8916-samsung-a2015: Add rt5033 battery
arm64: dts: qcom: msm8916-samsung-a5u: Add touch key regulator
...
Link: https://lore.kernel.org/r/20210614223712.393096-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Krzysztof Kozlowski [Mon, 14 Jun 2021 19:33:08 +0000 (21:33 +0200)]
arm64: dts: exynos: enable PMIC wakeup from suspend on TM2
The RTC on S2MPS13 PMIC can wakeup the system from suspend to RAM.
Add a generic property for this.
Link: https://lore.kernel.org/r/20210614193309.20248-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210420164943.11152-11-krzysztof.kozlowski@canonical.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 15 Jun 2021 15:11:54 +0000 (08:11 -0700)]
Merge tag 'imx-dt64-5.14' of git://git./linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree chagnes for 5.14:
- New board support: i.MX8MM Gateworks GW7901 board.
- Add SPBA bus description for i.MX8MN and i.MX8MM.
- A series of update on imx8mq-nitrogen board to add USB OTG/Host and
LT8912 MIPI-DSI to HDMI support.
- Correct enet clock description for i.MX8 Connection Subsystem.
- A couple of patches from Heiko Schocher to add FlexSPI device for
i.MX8MP SoC and enable SPI NOR Flash support on imx8mp-phycore-som.
- Remove the reference to audio IPG clock on i.MX8MP.
- Enable EQOS Ethernet and PMIC device support for imx8mp-evk.
- Disable USB over-current on imx8mm-evk and imx8mn-evk.
- Add dma-ranges description for i.MX8MM and i.MX8MN SoC.
- Add PCIe clock description for i.MX8MQ SoC.
- Enable PCIe support on freeway board.
- Enable OPTEE support on ls1028a-rdb board.
* tag 'imx-dt64-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (24 commits)
arm64: dts: imx8mn-evk: disable over current for usb
arm64: dts: imx8mm-evk: disable over current for usb1
arm64: dts: freescale: Separate each group of data in the property 'reg'
arm64: dts: imx8: conn: fix enet clock setting
arm64: dts: imx8mq: assign PCIe clocks
arm64: dts: imx8mn: specify dma-ranges
arm64: dts: imx8mm: specify dma-ranges
arm64: dts: fsl-ls1028a: Correct ECAM PCIE window ranges
arm64: dts: imx8mn-beacon-som: Assign PMIC clock
arm64: dts: ls208xa: remove bus-num from dspi node
arm64: dts: ls1012a: enable PCIe on freeway board
arm64: dts: imx8mp-evk: enable EQOS ethernet
arm64: dts: imx8mp: Remove the reference to audio ipg clock on imx8mp
arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy
arm64: dts: imx8mm: Add spba1 and spba2 buses
arm64: dts: imx8mn: Add spba1 bus
arm64: dts: imx8mq-nitrogen: add lt8912 MIPI-DSI to HDMI
arm64: dts: imx8mq-nitrogen: add USB HOST support
arm64: dts: imx8mq-nitrogen: add USB OTG support
arm64: dts: imx8mp-phycore-som: enable spi nor
...
Link: https://lore.kernel.org/r/20210613082544.16067-5-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 15 Jun 2021 15:11:30 +0000 (08:11 -0700)]
Merge tag 'imx-dt-5.14' of git://git./linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree changes for 5.14:
- New board support: i.MX6Q DaSheng COM-9XX SBC board, i.MX28 based XEA
board, GE B1x5v2 boards.
- A series from Christoph Niedermaier to correct imx6q-dhcom
descriptions, add device aliases and ethernet VIO regulator.
- Correct Ethernet node name for imx51-digi-connectcore-som and
imx53-ard board to comply DT schema.
- A couple of update on imx6dl-yapp4 board, configuring OLED display
segment offset, and using aliases to set custom MMC device indexes.
- A series from Oleksij Rempel and Robin van der Gracht to update
Protonic boards: imx6dl-prtvt7, imx6dl-plym2m and imx6qdl-vicut1.
- A series from Shengjiu Wang to improve various audio support on NXP
reference boards.
- Rename pinfunc for i.MX25 GPIO_[A-F] pads for consistency.
* tag 'imx-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (30 commits)
ARM: dts: imx6: Add GE B1x5v2
ARM: dts: imx6q-dhcom: Add ethernet VIO regulator
ARM: dts: imx6q-dhcom: Add aliases for i2c, serial and rtc
ARM: dts: imx6q-dhcom: Add gpios pinctrl for i2c bus recovery
ARM: dts: imx6q-dhcom: Fix ethernet plugin detection problems
ARM: dts: imx6q-dhcom: Fix ethernet reset time properties
ARM: dts: imx6dl-prtvt7: Remove unused 'sound-dai-cells' from ssi1 node
ARM: dts: imx6dl-prtvt7: The sgtl5000 uses i2s not ac97
ARM: dts: imx6qdl-vicut1: add interrupt-counter nodes
ARM: dts: imx6dl-prtvt7: Enable the VPU
ARM: dts: imx6dl: enable touchscreen debounce filter on PLYM2M and PRTVT7 boards
ARM: dts: imx6dl-plym2m: remove touchscreen-size-* properties
ARM: dts: imx6dl-prtvt7: fix PWM cell count for the backlight node.
ARM: dts: imx6dl-prtvt7: Remove backlight enable gpio
ARM: dts: imx6dl-prtvt7: add TSC2046 touchscreen node
ARM: dts: imx53-ard: Correct Ethernet node name
ARM: dts: i.MX51: digi-connectcore-som: Correct Ethernet node name
ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value
ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-ID
ARM: dts: imx6qdl-sabresd: Configure the gpio for hp detect
...
Link: https://lore.kernel.org/r/20210613082544.16067-4-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 15 Jun 2021 15:10:12 +0000 (08:10 -0700)]
Merge tag 'imx-bindings-5.14' of git://git./linux/kernel/git/shawnguo/linux into arm/dt
i.MX dt-bindings update for 5.14:
- Add vendor prefixes for congatec GmbH and DaSheng, Inc.
- Add compatibles for i.MX6Q DaSheng COM-9XX SBC, GE B1x5pv2 and
i.MX8MM GW7901 boards.
- Add an optional 'resets' property for i.MX GPCv2 bindings.
* tag 'imx-bindings-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: add GE B1x5pv2 boards
dt-bindings: vendor-prefixes: add congatec
dt-bindings: imx: gpcv2: add support for optional resets
dt-bindings: arm: imx: Add i.mx6q DaSheng COM-9XX SBC
dt-bindings: add dasheng vendor prefix
dt-bindings: arm: imx: add imx8mm gw7901 support
Link: https://lore.kernel.org/r/20210613082544.16067-3-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 15 Jun 2021 15:08:14 +0000 (08:08 -0700)]
Merge tag 'keystone_dts_for_5.13' of git://git./linux/kernel/git/ssantosh/linux-keystone into arm/dt
ARM: DTS: Keystone K2G cleanup for v5.13
- Rename message manager node
- Rename the TI-SCI node and clock
- assign clock to McAsp
* tag 'keystone_dts_for_5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone: k2g-evm: Move audio oscillator assigned clock to mcasp
ARM: dts: keystone: k2g: Rename the TI-SCI clocks node name
ARM: dts: keystone: k2g: Rename the TI-SCI node
ARM: dts: keystone: k2g: Rename message-manager node
Link: https://lore.kernel.org/r/1623564020-9958-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Nobuhiro Iwamatsu [Tue, 8 Jun 2021 00:52:06 +0000 (09:52 +0900)]
arm64: dts: visconti: Add PWM support for TMPV7708 SoC
Add PWM node in TMPV7708's dtsi, and tmpv7708-rm-mbrc boards's dts.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Shaik Sajida Bhanu [Thu, 10 Jun 2021 07:11:47 +0000 (12:41 +0530)]
arm64: dts: qcom: sc7180: Add xo clock for eMMC and Sd card
The calculations for the DLL register values are based on the clock rate
of the reference clock. Provide the reference clock in the definition of
the two SDHCI controllers to not rely on the default values.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
Link: https://lore.kernel.org/r/1623309107-27833-1-git-send-email-sbhanu@codeaurora.org
[bjorn: Rewrote commit message]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Vignesh Raghavendra [Mon, 7 Jun 2021 13:45:58 +0000 (19:15 +0530)]
arm64: dts: ti: Drop reg-io-width/reg-shift from UART nodes
8250_omap compatible UART IPs on all SoCs have registers aligned at 4
byte address boundary and constant byte addressability. Thus there is no
need for reg-io-width or reg-shift DT properties. These properties are
not used by 8250_omap driver nor documented as part of binding document.
Therefore drop them.
This is in preparation to move omap-serial.txt to YAML format.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210607134558.23704-1-vigneshr@ti.com
Aswath Govindraju [Tue, 8 Jun 2021 05:14:14 +0000 (10:44 +0530)]
arm64: dts: ti: k3-am642-evm: align ti,pindir-d0-out-d1-in property with dt-shema
ti,pindir-d0-out-d1-in property is expected to be of type boolean.
Therefore, fix the property accordingly.
Fixes:
4fb6c04683aa ("arm64: dts: ti: k3-am642-evm: Add support for SPI EEPROM")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210608051414.14873-3-a-govindraju@ti.com
Aswath Govindraju [Tue, 8 Jun 2021 05:14:13 +0000 (10:44 +0530)]
arm64: dts: ti: am65: align ti,pindir-d0-out-d1-in property with dt-shema
ti,pindir-d0-out-d1-in property is expected to be of type boolean.
Therefore, fix the property accordingly.
Fixes:
e180f76d0641 ("arm64: dts: ti: Add support for Siemens IOT2050 boards")
Fixes:
5da94b50475a ("arm64: dts: ti: k3-am654: Enable main domain McSPI0")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210608051414.14873-2-a-govindraju@ti.com
Grygorii Strashko [Tue, 8 Jun 2021 18:49:40 +0000 (21:49 +0300)]
arm64: dts: ti: k3-am642-main: fix ports mac properties
The current device tree CPSW3g node adds non-zero "mac-address" property to
the ports, which prevents random MAC address assignment to network devices
if bootloader failed to update DT. This may cause more then one host to
have the same MAC in the network.
mac-address = [00 00 de ad be ef];
mac-address = [00 01 de ad be ef];
In addition, there is one MAC address available in eFuse registers which
can be used for default port 1.
Hence, fix ports MAC properties by:
- resetting "mac-address" property to 0
- adding ti,syscon-efuse = <&main_conf 0x200> to Port 1
Fixes:
3753b12877b6 ("arm64: dts: ti: k3-am64-main: Add CPSW DT node")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210608184940.25934-1-grygorii.strashko@ti.com
Martin Blumenstingl [Fri, 4 Jun 2021 17:08:44 +0000 (19:08 +0200)]
ARM: dts: meson: Set the fifo-size of uart_A to 128 bytes
The first UART controller in the "Everything-Else" power domain is
called uart_A. Unlike all other UARTs (which use a 64 byte fifo-size in
hardware) uart_A has a fifo-size of 128 bytes. This UART controller is
typically used for Bluetooth HCI.
The fifo-size of 128 bytes is valid from all SoCs from Meson6 (or
possibly even earlier) all the way up to the latest 64-bit ones.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210604170844.2201229-1-martin.blumenstingl@googlemail.com
Neil Armstrong [Mon, 7 Jun 2021 06:54:35 +0000 (08:54 +0200)]
arm64: dts: meson-sm1-odroid-c4: remove invalid hub_5v regulator
Drop the hub_5v regulator which controls the HUB Reset line with GPIOH_4 which
is already controlled by a GPIO HOG.
Until we can properly describe how to control USB HUBs reset lines, keeping
the GPIO HOG is an acceptable solution we use on multiple boards.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-8-narmstrong@baylibre.com
Christian Hewitt [Mon, 7 Jun 2021 06:54:34 +0000 (08:54 +0200)]
arm64: dts: meson-sm1-odroid-hc4: add spifc node to ODROID-HC4
Add a node for the XT25F128B SPI-NOR flash to make it accessible
from Linux.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-7-narmstrong@baylibre.com
Neil Armstrong [Mon, 7 Jun 2021 06:54:33 +0000 (08:54 +0200)]
arm64: dts: meson-sm1-odroid-hc4: add regulators controlled by GPIOH_8
As described in the HC4 schematics, GPIOH_8 controls the USB 5V and 12V
regulators used to power the SATA drives.
And is set as Open Drain since this GPIO doesn't support Push-Pull.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-6-narmstrong@baylibre.com
Neil Armstrong [Mon, 7 Jun 2021 06:54:32 +0000 (08:54 +0200)]
arm64: dts: meson-sm1-odroid-hc4: disable unused USB PHY0
As described in the HC4 schematics, only the USB port B is used,
port A is left unconnected. Thus disable PHY0 and remove it from PHYs list.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-5-narmstrong@baylibre.com
Neil Armstrong [Mon, 7 Jun 2021 06:54:31 +0000 (08:54 +0200)]
arm64: dts: meson-sm1-odroid: add 5v regulator gpio
As described in the Odroid-C4 & Odroid-HC4 schematics, the 5V regulator is controlled
by GPIOH_8 and in Open Drain since this GPIO doesn't support Push-Pull.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-4-narmstrong@baylibre.com
Neil Armstrong [Mon, 7 Jun 2021 06:54:30 +0000 (08:54 +0200)]
arm64: dts: meson-sm1-odroid: set tf_io regulator gpio as open source
According to Odroid-C4 & HC4 Schematics, the TF_3V3N_1V8_EN can be in Hi-Z for 3v3,
and since it's the default GPIOAO_6 mode at reset, let switch this GPIO as Open-Source
to drive for 1, and input for 0.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-3-narmstrong@baylibre.com
Neil Armstrong [Mon, 7 Jun 2021 06:54:29 +0000 (08:54 +0200)]
arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator
As described in the schematics of Odroid-C4 and Odroid-HC4, the TF_IO regulator
is enabled by the GPIOE_2 GPIO and gets it's supply from VCC_5V.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-2-narmstrong@baylibre.com
Alex Bee [Thu, 27 May 2021 15:44:52 +0000 (17:44 +0200)]
ARM: dts: rockchip: add power controller for RK322x
Add the power controller node and the correspondending qos nodes for
RK322x.
Also add the power-domain property to the nodes that are already
present.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210527154455.358869-10-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Alex Bee [Thu, 27 May 2021 15:44:51 +0000 (17:44 +0200)]
ARM: dts: rockchip: add power controller for RK3036
Add the power controller node and the correspondending qos nodes for
RK3036.
Also add the power-domain property to the nodes that are already
present.
Note: Since the regiser offsets of the axi interconnect QoS are missing
in the TRM (RK3036 TRM V1.0), they have been taken from vendor kernel.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210527154455.358869-9-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Uwe Kleine-König [Fri, 11 Jun 2021 08:14:14 +0000 (10:14 +0200)]
arm64: dts: rockchip: Add support for USB on helios64
This enables the USB hardware needed to access devices on the sockets J1
and J13.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210611081414.1448786-1-uwe@kleine-koenig.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Johan Jonker [Sat, 12 Jun 2021 18:47:33 +0000 (20:47 +0200)]
ARM: dts: rockchip: add labels to the timer nodes on rk3066a
While the kernel doesn't care so much right now, boot loaders like
u-boot need to refine the node on their side, so to make life easier
for everyone add the labels to the timer nodes on rk3066a.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210612184733.2331-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Corentin Labbe [Fri, 11 Jun 2021 22:05:01 +0000 (00:05 +0200)]
ARM: dts: gemini: add crypto node
The SL3516 SoC has a crypto offloader IP.
This patch adds it on the gemini SoC Device-tree.
Link: https://lore.kernel.org/r/20210611220501.684997-1-linus.walleij@linaro.org
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:54:28 +0000 (08:54 -0700)]
Merge tag 'sunxi-dt-for-5.14-1' of https://git./linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches to improve the Allwinner SoCs support,
mainly:
- I2S Support for the V3
- Audio Codec Support for the V3s
- DMA support for the V3s
- PWM support for the V3s
- Support for Bluetooth Audio on the pinephone
- Add A10-like timers to the A64 and R40
- New boards: Forlinx OKA40i-C, Forlinx OKA40i-C, NanoPi R1S H5
* tag 'sunxi-dt-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (29 commits)
ARM: dts: sun8i: v3s: enable emac for zero Dock
arm64: dts: allwinner: pinephone: Set audio card name
ARM: dts: sun8i: r40: Add timer node
ARM: dts: sun8i: V3: add I2S interface to V3 dts
dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible
ARM: dts: sun8i: V3: add codec analog frontend to V3 dts
ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3
ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts
ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMA
ARM: dts: sun8i: v3s: add DMA controller to v3s dts
ARM: dts: sun8i: v3s: add pwm controller to v3s dts
dt-bindings: pwm: allwinner: add v3s pwm compatible
arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
dt-bindings: arm: Add NanoPi R1S H5
arm64: dts: allwinner: pinephone: Add support for Bluetooth audio
arm64: dts: allwinner: a64: Allow multiple DAI links
arm64: dts: allwinner: a64: Add pinmux nodes for AIF2/AIF3
arm64: dts: allwinner: a64: Allow using multiple codec DAIs
ARM: dts: sun8i-a33: Allow using multiple codec DAIs
ASoC: dt-bindings: sun8i-codec: Increase #sound-dai-cells
...
Link: https://lore.kernel.org/r/96cc77ec-139d-4685-8a66-a60964cf39fd.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:49:10 +0000 (08:49 -0700)]
Merge tag 'at91-dt-5.14' of git://git./linux/kernel/git/at91/linux into arm/dt
AT91 dt for 5.14:
- A fix for sama5d4 gpio mux
- A trivial fix for DT documentation
* tag 'at91-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
dt-bindings: i2c: at91: fix example for scl-gpios
ARM: dts: at91: sama5d4: fix pinctrl muxing
Link: https://lore.kernel.org/r/20210611123446.20510-1-nicolas.ferre@microchip.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:47:54 +0000 (08:47 -0700)]
Merge tag 'v5.13-next-dts64' of https://git./linux/kernel/git/matthias.bgg/linux into arm/dt
mt8173:
- split hardware encoder block into two devices.
mt8167:
- add pm domains, multi-media system (mmsys), SMI, local arbiter
(larb) and IOMMU nodes.
mt8183:
- Add new chromebooks: HP Chromebook 11a, Acer Chromebook 311, HP
Chromebook x360 11MK G3 EE, Lenovo IdeaPad Flex 3.
- add power domain to SMI common node.
- add power supplies for EEPROM node.
* tag 'v5.13-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (21 commits)
arm64: dts: mt8183: Add node for the Mali GPU
arm64: dts: mt8183-kukui: Add tboard thermal zones
arm64: dts: mt8183: add cbas node under cros_ec
arm64: dts: mt8183: add supply name for eeprom
arm64: dts: mt8183: remove syscon from smi_common node
arm64: dts: mt8183: Add kukui-jacuzzi-fennel board
arm64: dts: mt8183: Add kukui-jacuzzi-kenzo board
arm64: dts: mt8183: Add kukui-jacuzzi-burnet board
arm64: dts: mt8183: Add kukui-jacuzzi-willow board
arm64: dts: mt8183: Add kukui-jacuzzi-kappa board
dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-fennel
dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-kenzo
dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-burnet
dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-willow
dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-kappa
arm64: dts: mediatek: mt8167: add iommu node
arm64: dts: mediatek: mt8167: add larb nodes
arm64: dts: mediatek: mt8167: add smi_common node
arm64: dts: mediatek: mt8167: add mmsys node
arm64: dts: mediatek: mt8167: add power domains
...
Link: https://lore.kernel.org/r/117d5eb5-bc99-70bb-a1a9-d7141fe96527@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:46:26 +0000 (08:46 -0700)]
Merge tag 'renesas-dt-bindings-for-v5.14-tag1' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v5.14
- Document support for the new RZ/G2L, RZ/G2LC, and RZ/G2UL SoCs,
- Document support for the new RZ/G2L SMARC EVK board.
* tag 'renesas-dt-bindings-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: power: renesas,rzg2l-sysc: Add DT binding documentation for SYSC controller
dt-bindings: arm: renesas: Document SMARC EVK
dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants
dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC
Link: https://lore.kernel.org/r/cover.1623403802.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:45:36 +0000 (08:45 -0700)]
Merge tag 'renesas-arm-dt-for-v5.14-tag2' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.14 (take two)
- External interrupt (INTC-EX) support for the R-Car M3-W+ SoC,
- Initial support for the new RZ/G2L SoC on the RZ/G2L SMARC EVK
board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.14-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r9a07g044: Add SYSC node
arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVK
arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's
dt-bindings: clock: Add r9a07g044 CPG Clock Definitions
arm64: dts: renesas: r8a779a0: Drop power-domains property from GIC node
arm64: dts: renesas: r8a77961: Add INTC-EX device node
ARM: dts: silk: Configure pull-up for SOFT_SW GPIO keys
ARM: dts: gose: Configure pull-up for SOFT_SW GPIO keys
ARM: dts: blanche: Configure pull-up for SOFT_SW and SW25 GPIO keys
ARM: dts: lager: Configure pull-up for SOFT_SW GPIO keys
arm64: dts: renesas: r8a7796[01]: Fix OPP table entry voltages
arm64: dts: renesas: Add missing opp-suspend properties
Link: https://lore.kernel.org/r/cover.1623403796.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:42:54 +0000 (08:42 -0700)]
Merge tag 'juno-fix-5.14' of git://git./linux/kernel/git/sudeep.holla/linux into arm/dt
ARMv8 Juno fix for v5.14
Just a single fix to use standard and generic nodes names for SCMI
power domain controller and clock controller devicetree nodes.
* tag 'juno-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Update SCPI nodes as per the YAML schema
Link: https://lore.kernel.org/r/20210611075805.2813712-1-sudeep.holla@arm.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:41:04 +0000 (08:41 -0700)]
Merge tag 'ux500-dts-v5.14' of git://git./linux/kernel/git/linusw/linux-nomadik into arm/dt
Some Ux500 DTS updates for v5.14:
- Fix interrupt cells, GPIO controller node names in accordance
with new YAML schemas.
- Add proper compatible strings for Broadcomm Wifi and BT.
- Fix upp and add some mount matrices for accelerometers so
e.g. UI:s work as they should.
- Drop the DRDY pin assignment for a non-existing pin on a
magnetometer.
* tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ux500: Fix orientation of Janice accelerometer
ARM: dts: href: Mount matrices for TVK R2
ARM: dts: ux500: Fix some compatible strings
ARM: dts: ux500: Drop drdy pin assignment from magnetometer
ARM: dts: ux500: Fix orientation of accelerometer
ARM: dts: ux500: Rename gpio-controller node
ARM: dts: ux500: Fix interrupt cells
Link: https://lore.kernel.org/r/CACRpkdYh9kZJU6PAxghPRGBco_61wRZgUnTZr_3qvySPCo5rBw@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:40:27 +0000 (08:40 -0700)]
Merge tag 'arm-soc/for-5.14/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs changes for 5.14,
please pull the following:
- Zhen fixes the Broadcom stingray serial node unit names to fix a DT
binding warning
* tag 'arm-soc/for-5.14/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: normalize the node name of the UART devices
Link: https://lore.kernel.org/r/20210610194836.309869-2-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:40:07 +0000 (08:40 -0700)]
Merge tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.14, please pull the following:
- Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS
files to resolve a number of DT binding check warnings pertaining to
NAND, pinmux, clocks, SPI
- Stefan provides a fix for an increase in the DWC2 controller's RX FIFO
causing regressions on the Raspberry Pi 4B
- Mateusz adds a BCM2711 specific VEC compatible string to allow keying
off that variant properly
- Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI
re-organization work and finally adding the DTS file proper
* tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Add reference to RPi 400
ARM: dts: Add Raspberry Pi 400 support
ARM: dts: bcm283x: Fix up GPIO LED node names
dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema
ARM: dts: Move BCM2711 RPi specific into separate dtsi
ARM: dts: bcm283x: Fix up MMC node names
ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible
Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size"
ARM: dts: BCM5301X: Fixup SPI binding
dt-bindings: clock: brcm, iproc-clocks: convert to the json-schema
ARM: dts: BCM5301X: Fix pinmux subnodes names
ARM: dts: Hurricane 2: Fix NAND nodes names
ARM: dts: BCM63xx: Fix NAND nodes names
ARM: NSP: dts: fix NAND nodes names
ARM: Cygnus: dts: fix NAND nodes names
ARM: brcmstb: dts: fix NAND nodes names
ARM: dts: BCM5301X: Fix NAND nodes names
Link: https://lore.kernel.org/r/20210610194836.309869-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:39:40 +0000 (08:39 -0700)]
Merge tag 'stm32-dt-for-v5.14-1' of git://git./linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.14, round 1
Highlights:
-----------
MCU part:
- Fixes for Yaml verifications
MPU part:
- Configure qspi's mdma transfer to block for stm32mp151
- ST boards:
- Fixes for yaml verifications
- DH boards:
- Fixes for yaml verifications
- Rework of LAN8710i on DHCOM SoM to fit with requested reset sequence.
- Odyssey boards:
- fix Sd card detectection (gpio line updated)
- fix eMMC VQMMC suuply (use vdd instead of v3v3)
* tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: fix stpmic node for stm32mp1 boards
ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM
ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM
ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM
ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply
ARM: dts: stm32: add a new DCMI pins group on stm32mp15
ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7
dt-bindings: net: document ptp_ref clk in dwmac
ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings
ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings
ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings
ARM: dts: stm32: fix RCC node name on stm32f429 MCU
ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards
ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin
ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151
ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2
ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2
ARM: dts: stm32: Rework LAN8710Ai PHY reset on DHCOM SoM
Link: https://lore.kernel.org/r/e4bfb255-63fb-74a8-d591-eb09821c93ee@foss.st.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:38:10 +0000 (08:38 -0700)]
Merge tag 'samsung-dt-5.14' of https://git./linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.14
1. Several cleanups and alignment with dtschema. This includes removal
of unused properties and fixing LED brightness property.
2. Enable PMIC RTC interrupt as a wakeup source (intended to wakeup for
example from Suspend to RAM where the PMIC RTC's power is still
supplied).
3. Disable unused/not implemented camera on GT-I9100.
* tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Disable unused camera input for I9100
ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU3/XU4 family
ARM: dts: exynos: enable PMIC wakeup from suspend on SMDK5420
ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale Octa
ARM: dts: exynos: enable PMIC wakeup from suspend on P4 Note
ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid X/U3
ARM: dts: exynos: enable PMIC wakeup from suspend on Midas
ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU
ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale
ARM: dts: exynos: enable PMIC wakeup from suspend on Origen4412
ARM: dts: exynos: enable PMIC wakeup from suspend on Itop Core
ARM: dts: s5pv210: remove unused Atmel touchscreen properties in Goni
ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4
ARM: dts: exynos: fix PWM LED max brightness on Odroid HC1
ARM: dts: exynos: fix PWM LED max brightness on Odroid XU/XU3
ARM: dts: exynos: replace legacy MMS114 touchscreen x/y properties in GT-N7100
ARM: dts: exynos: align Broadcom WiFi with dtschema
Link: https://lore.kernel.org/r/20210610074055.12474-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:35:45 +0000 (08:35 -0700)]
Merge tag 'aspeed-5.14-devicetree' of git://git./linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 5.14
- IBM Rainier and Everest LED descriptions. These systems have a large
number of LEDs attached via expanders.
- Ampere Mt Jade updates, as OpenBMC bringup continues for this
machine.
- Updated 64MB flash layout for systems using OpenBMC on NOR root file
systems.
- Support for HS200 MMC on AST2600 EVB. This is only supported from A2,
so a new device tree is added to support A0 and A1.
- Update all command lines for early serial output.
* tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: everest: Add pcie cable card indicator leds
ARM: dts: aspeed: everest: Add vrm and other indicator leds
ARM: dts: aspeed: everest: Add dimm indicator leds
ARM: dts: aspeed: everest: Add pcie slot indicator leds
ARM: dts: aspeed: everest: Add nvme and fan indicator leds
ARM: dts: aspeed: everest: Add system level indicator leds
ARM: dts: aspeed-g5: Add SCU phandle to GFX node
ARM: dts: aspeed: Everest: Add directly controlled LEDs
ARM: dts: aspeed: Rainier 4U: Remove fan updates
ARM: dts: aspeed: Everest: Fix cable card PCA chips
ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layout
ARM: dts: aspeed: mtjade: switch to 64MB flash layout
ARM: dts: aspeed: mtjade: Add PSU support
ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI
ARM: dts: aspeed: Set earlycon boot argument
ARM: dts: aspeed-g6: Add pinctrl settings
ARM: dts: aspeed: ast2600evb: Add dts file for A1 and A0
ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller.
ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb.
Link: https://lore.kernel.org/r/CACPK8XduV9F=piu1qh56g+YNOZOBYTW7b2Y=XVYafpYDwWmDYA@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Walleij [Sat, 5 Jun 2021 16:10:07 +0000 (18:10 +0200)]
ARM: dts: ixp4xx: Add crypto engine
Add the crypto engine as a child of the NPE.
Link: https://lore.kernel.org/r/20210605161007.3397216-1-linus.walleij@linaro.org
Cc: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:34:12 +0000 (08:34 -0700)]
Merge tag 'amlogic-arm64-dt-for-v5.14' of https://git./linux/kernel/git/amlogic/linux into arm/dt
Amlogic ARM64 DT changed for v5.14:
- set 128bytes FIFO size on uart A
- add Banana PI BPI-M5 board dts & bindings
- meson-sm1: add toacodec node to use internal audio DAC
- enable hdmi audio loopback on VIM3 board
* tag 'amlogic-arm64-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: meson: set 128bytes FIFO size on uart A
arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts
dt-bindings: arm: amlogic: add Banana PI M5 bindings
arm64: dts: meson-sm1: add toacodec node
arm64: dts: meson: vim3: enable hdmi audio loopback
Link: https://lore.kernel.org/r/bb207cf8-fc7a-3121-eea8-56618b5952aa@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:33:21 +0000 (08:33 -0700)]
Merge tag 'omap-for-v5.14/dt-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.14 merge window
Mostly just clean-up for device tree binding checks with
few other clean-up patches:
- Drop ov5640 sensor for dra76-evm, it's just one of the
optional additional sensors and makes hard to use any of
the other options, TI is using the devicetree overlay
snippets for these
- Group the phandles in osd3358-sm-red to make the files
more readable
- A series of gpio clean-up patches to follow the binding
documentation
- Move ti,no-reset related properties to the target module
level, the ti-sysc driver handles them also in the child
but they really belong to the target module
- Drop the unnecessary uart compatible entries to make the
binding check to work
- Mailbox related updates to make the binding check to
work
* tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names
ARM: dts: AM33xx/AM43xx: Rename wkup_m3 sub-mailbox node
ARM: dts: OMAP2/OMAP3: Rename processor sub-mailbox nodes
ARM: dts: OMAP2420: Drop interrupt-names from mailbox node
ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodes
ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes
ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios
ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios
ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios
ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
ARM: dts: omap5-board-common: align gpio hog names with dt-schema
ARM: dts: omap3: align gpio hog names with dt-schema
ARM: dts: am437x: align gpio hog names with dt-schema
ARM: dts: am335x: align GPIO hog names with dt-schema
ARM: dts: osd3358-sm-red: group in the same phandle all its properties
ARM: dts: dra76-evm: remove ov5640
Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com-3
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:26:56 +0000 (08:26 -0700)]
Merge tag 'renesas-arm-dt-for-v5.14-tag1' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.14
- GPIO extender support for the Falcon development board,
- Switches support for the ALT development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: alt: Add SW2 as GPIO keys
ARM: dts: renesas: Move enable-method to CPU nodes
arm64: dts: renesas: beacon: Fix USB ref clock references
arm64: dts: renesas: beacon: Fix USB extal reference
ARM: dts: rcar-gen1: Correct internal delay for i2c[123]
arm64: dts: renesas: eagle: Add x1 clock
ARM: dts: koelsch: Rename sw2 to keyboard
ARM: dts: r8a7779, marzen: Fix DU clock names
arm64: dts: renesas: v3msk: Fix memory size
arm64: dts: renesas: condor: Switch eMMC bus to 1V8
arm64: dts: renesas: falcon-csi-dsi: Add GPIO extenders
arm64: dts: renesas: beacon kit: Setup AVB refclk
arm64: dts: renesas: Add fck to etheravb-rcar-gen3 clock-names list
ARM: dts: renesas: Add fck to etheravb-rcar-gen2 clock-names list
Link: https://lore.kernel.org/r/cover.1622188835.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:25:17 +0000 (08:25 -0700)]
Merge tag 'gemini-dts-v5.14-1' of git://git./linux/kernel/git/linusw/linux-nomadik into arm/dt
Gemini device tree updates for the v5.14 kernel:
- MAINTAINERS fix for the DTS files
- Drop a duplicate ethernet node on the RUT1xx DTS
- Add device_type to the PCI node
- Fix up some DTS syntax so it agrees with the schemas merged
for the v5.14 merge window
* tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: gemini: remove xxx-cells from display
ARM: dts: gemini-dlink-dir-685: Remove address from display port
ARM: dts: gemini-dlink-dir-685: rename gpio-i2c to i2c
ARM: dts: gemini-dlink-dns-313: rename gpio-i2c to i2c
ARM: dts: gemini: convert obsolete SPI properties
ARM: dts: gemini: use the right rtc compatible
ARM: dts: gemini: add device_type on pci
ARM: dts: gemini-rut1xx: remove duplicate ethernet node
ARM: dts: gemini: rename mdio to the right name
MAINTAINERS: gemini: add missing dts pattern
Link: https://lore.kernel.org/r/CACRpkdZWpLAcAStq8dEyGL_d9Bvp-WNPu-2EuJw1eTL4kyvgig@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:24:49 +0000 (08:24 -0700)]
Merge tag 'ixp4xx-dts-v5.14-1' of git://git./linux/kernel/git/linusw/linux-nomadik into arm/dt
IXP4xx DTS updates for the v5.14 kernel:
- Add ethernet to the boards
- Add PCI hosts to the boards
- Create an expansion bus around the flash memory
- Add the beeper to NSLU2 completing the NSLU2 DTS
* tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Fix up the IXP4xx ethernet nodes
ARM: dts: ixp4xx: Add beeper to the NSLU2
ARM: dts: ixp4xx: Create a proper expansion bus
ARM: dts: ixp4xx: Add PCI hosts
ARM: dts: ixp4xx: Add ethernet
Link: https://lore.kernel.org/r/CACRpkdbmRjGW7vpr7hG+jiRTqNMZAyKZNhtvzj=SqhZmb1+F6A@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Corentin Labbe [Tue, 4 May 2021 19:34:57 +0000 (19:34 +0000)]
ARM: dts: add intel-ixp42x-welltech-epbx100
This patch adds devicetree for intel-ixp42x-welltech-epbx100.
Link: https://lore.kernel.org/r/20210504193457.4008384-6-clabbe@baylibre.com
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Corentin Labbe [Tue, 4 May 2021 19:34:56 +0000 (19:34 +0000)]
dt-bindings: arm: intel-ixp4xx: add welltech,epbx100
Adds welltech,epbx100 as a valid intel-ixp4xx board.
Link: https://lore.kernel.org/r/20210504193457.4008384-5-clabbe@baylibre.com
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Corentin Labbe [Tue, 4 May 2021 19:34:55 +0000 (19:34 +0000)]
dt-bindings: add vendor prefix for welltech
Add vendor prefix for Welltech computer Co Ld.
Link: https://lore.kernel.org/r/20210504193457.4008384-4-clabbe@baylibre.com
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Li Jun [Fri, 28 May 2021 11:29:59 +0000 (19:29 +0800)]
arm64: dts: imx8mn-evk: disable over current for usb
imx8mn evk board usb port does not support over current detection,
so disable it.
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Jun [Fri, 28 May 2021 11:29:58 +0000 (19:29 +0800)]
arm64: dts: imx8mm-evk: disable over current for usb1
imx8mm evk board usb1 port does not support over current detection,
so disable it.
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Sebastian Reichel [Wed, 26 May 2021 15:22:42 +0000 (17:22 +0200)]
dt-bindings: arm: fsl: add GE B1x5pv2 boards
Document the compatible for GE B1x5pv2 boards.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Sebastian Reichel [Wed, 26 May 2021 15:22:41 +0000 (17:22 +0200)]
dt-bindings: vendor-prefixes: add congatec
Document binding for congatec.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Zhen Lei [Fri, 21 May 2021 09:20:42 +0000 (17:20 +0800)]
arm64: dts: freescale: Separate each group of data in the property 'reg'
Do not write the 'reg' of multiple groups of data into a uint32 array,
use <> to separate them. Otherwise, the errors similar to the following
will be reported by reg.yaml.
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dt.yaml:
soc: pcie@
3400000:reg:0: \
[0,
54525952, 0,
1048576, 64, 0, 0, 8192] is too long
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Dong Aisheng [Fri, 21 May 2021 03:12:48 +0000 (11:12 +0800)]
arm64: dts: imx8: conn: fix enet clock setting
enet_clk_ref actually is sourced from internal gpr clocks
which needs a default rate. Also update enet lpcg clock
output names to be more straightforward.
Cc: Abel Vesa <abel.vesa@nxp.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lucas Stach [Fri, 7 May 2021 22:12:13 +0000 (00:12 +0200)]
arm64: dts: imx8mq: assign PCIe clocks
This fixes multiple issues with the current non-existent PCIe clock setup:
The controller can run at up to 250MHz, so use a parent that provides this
clock.
The PHY needs an exact 100MHz reference clock to function if the PCIe
refclock is not fed in via the refclock pads. While this mode is not
supported (yet) in the driver it doesn't hurt to make sure we are
providing a clock with the right rate.
The AUX clock is specified to have a maximum clock rate of 10MHz. So
the current setup, which drives it straight from the 25MHz oscillator is
actually overclocking the AUX input.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lucas Stach [Tue, 4 May 2021 08:20:52 +0000 (10:20 +0200)]
arm64: dts: imx8mn: specify dma-ranges
DMA addressing capabilities on i.MX8MN are limited by the interconnect,
same as on i.MX8MQ. Add dma-ranges to the the peripheral bus to let
the kernel know about this.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lucas Stach [Tue, 4 May 2021 08:20:51 +0000 (10:20 +0200)]
arm64: dts: imx8mm: specify dma-ranges
DMA addressing capabilities on i.MX8MM are limited by the interconnect,
same as on i.MX8MQ. Add dma-ranges to the the peripheral bus to let
the kernel know about this.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Kornel Duleba [Wed, 7 Apr 2021 12:34:38 +0000 (14:34 +0200)]
arm64: dts: fsl-ls1028a: Correct ECAM PCIE window ranges
Currently all PCIE windows point to bus address 0x0, which does not match
the values obtained from hardware during EA.
Replace those values with CPU addresses, since in reality we
have a 1:1 mapping between the two.
Signed-off-by: Kornel Duleba <mindal@semihalf.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adam Ford [Wed, 28 Apr 2021 13:00:58 +0000 (08:00 -0500)]
arm64: dts: imx8mn-beacon-som: Assign PMIC clock
The PMIC throws an errors because the clock isn't assigned to it.
Fix this by assigning the clocks info.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Mian Yousaf Kaukab [Wed, 28 Apr 2021 12:58:07 +0000 (14:58 +0200)]
arm64: dts: ls208xa: remove bus-num from dspi node
On LS2088A-RDB board, if the spi-fsl-dspi driver is built as module
then its probe fails with the following warning:
[ 10.471363] couldn't get idr
[ 10.471381] WARNING: CPU: 4 PID: 488 at drivers/spi/spi.c:2689 spi_register_controller+0x73c/0x8d0
...
[ 10.471651] fsl-dspi
2100000.spi: Problem registering DSPI ctlr
[ 10.471708] fsl-dspi: probe of
2100000.spi failed with error -16
Reason for the failure is that bus-num property is set for dspi node.
However, bus-num property is not set for the qspi node. If probe for
spi-fsl-qspi happens first then id 0 is dynamically allocated to it.
Call to spi_register_controller() from spi-fsl-dspi driver then fails.
Since commit
29d2daf2c33c ("spi: spi-fsl-dspi: Make bus-num property
optional") bus-num property is optional. Remove bus-num property from
dspi node to fix the issue.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Mian Yousaf Kaukab [Mon, 26 Apr 2021 07:52:11 +0000 (09:52 +0200)]
arm64: dts: ls1012a: enable PCIe on freeway board
ls1012a-freeway board contains a M.2 2230 slot. Update the status of
pcei1 node to okay so that the pcie controller can be probed.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Joakim Zhang [Mon, 26 Apr 2021 07:06:54 +0000 (15:06 +0800)]
arm64: dts: imx8mp-evk: enable EQOS ethernet
Enable EQOS ethernet on i.MX8MP EVK board.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Jacky Bai [Tue, 20 Apr 2021 05:54:52 +0000 (13:54 +0800)]
arm64: dts: imx8mp: Remove the reference to audio ipg clock on imx8mp
On i.MX8MP, there is no audio ipg clock, so remove the wrong reference
to this clock in dts file.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Richard Zhu [Wed, 14 Apr 2021 02:26:14 +0000 (10:26 +0800)]
arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy
Both 1.8v and 3.3v power supplies can be used by i.MX8MQ PCIe PHY.
In default, the PCIE_VPH voltage is suggested to be 1.8v refer to data
sheet. When PCIE_VPH is supplied by 3.3v in the HW schematic design,
the VREG_BYPASS bits of GPR registers should be cleared from default
value 1b'1 to 1b'0. Thus, the internal 3v3 to 1v8 translator would be
turned on.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adam Ford [Tue, 6 Apr 2021 01:33:43 +0000 (20:33 -0500)]
arm64: dts: imx8mm: Add spba1 and spba2 buses
The i.MX8MM reference manual shows there are two spba busses.
SPBA1 handles much of the serial interfaces, and SPBA2 covers much
of the audio.
Add both of them.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>