OSDN Git Service
Marijn Suijten [Mon, 26 Sep 2022 19:01:47 +0000 (21:01 +0200)]
arm64: dts: qcom: sm6125-seine: Include PM6125 and configure PON
The Sony Xperia Seine board uses the PM6125; include it and configure
the PON buttons that provide the power and volume-up key.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220926190148.283805-5-marijn.suijten@somainline.org
Marijn Suijten [Mon, 26 Sep 2022 19:01:46 +0000 (21:01 +0200)]
arm64: dts: qcom: Add PM6125 PMIC
This PMIC is commonly used on boards with an SM6125 SoC and looks very
similar in layout to the PM6150.
Downstream declares more nodes to be available, but these have been
omitted from this patch: the pwm/lpg block is unused on my reference
device making it impossible to test/validate, and the spmi-clkdiv does
not have a single device-tree binding using this driver yet, hence
inclusion is better postponed until ie. audio which uses these clocks is
brought up.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220926190148.283805-4-marijn.suijten@somainline.org
Marijn Suijten [Mon, 26 Sep 2022 19:01:45 +0000 (21:01 +0200)]
arm64: dts: qcom: pm660: Use unique ADC5_VCOIN address in node name
The register address in the node name is shadowing vph_pwr@83, whereas
the ADC5_VCOIN register resolves to 0x85. Fix this copy-paste
discrepancy.
Fixes:
4bf097540506 ("arm64: dts: qcom: pm660: Add VADC and temp alarm nodes")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220926190148.283805-3-marijn.suijten@somainline.org
Marijn Suijten [Mon, 26 Sep 2022 19:01:44 +0000 (21:01 +0200)]
dt-bindings: mfd: qcom-spmi-pmic: Add pm6125 compatible
Document support for the pm6125, typically paired with the sm6125 SoC.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220926190148.283805-2-marijn.suijten@somainline.org
Dmitry Baryshkov [Sat, 24 Sep 2022 09:43:47 +0000 (12:43 +0300)]
arm64: dts: qcom: msm8996: change HDMI PHY node name to generic one
Change HDMI PHY node name from custom 'hdmi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924094347.178666-3-dmitry.baryshkov@linaro.org
Krzysztof Kozlowski [Sun, 18 Sep 2022 09:54:30 +0000 (10:54 +0100)]
dt-bindings: arm: qcom: document Google Cheza
Document Google Cheza board compatibles recently added.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220918095430.18068-1-krzysztof.kozlowski@linaro.org
Iskren Chernev [Mon, 19 Sep 2022 18:06:18 +0000 (21:06 +0300)]
arm64: dts: qcom: sm4250: Add support for oneplus-billie2
Add initial support for OnePlus Nord N100, based on SM4250. Currently
working:
- boots
- usb
- built-in flash storage (UFS)
- SD card reader
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919180618.1840194-9-iskren.chernev@gmail.com
Iskren Chernev [Mon, 19 Sep 2022 18:06:17 +0000 (21:06 +0300)]
arm64: dts: qcom: sm4250: Add soc dtsi
The SM4250 is a downclocked version of the SM6115.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919180618.1840194-8-iskren.chernev@gmail.com
Iskren Chernev [Mon, 19 Sep 2022 18:06:16 +0000 (21:06 +0300)]
arm64: dts: qcom: sm6115: Add basic soc dtsi
Add support for Qualcomm SM6115 SoC. This includes:
- GCC
- Pinctrl
- RPM (CC+PD)
- USB
- MMC
- UFS
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919180618.1840194-7-iskren.chernev@gmail.com
Iskren Chernev [Mon, 19 Sep 2022 18:06:13 +0000 (21:06 +0300)]
dt-bindings: arm: qcom: Add compatible for oneplus,billie2 phone
oneplus,billie2 (OnePlus Nord N100) is based on QualComm Snapdragon
SM4250 SoC.
Add support for the same in dt-bindings.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919180618.1840194-4-iskren.chernev@gmail.com
Johan Hovold [Mon, 24 Oct 2022 12:58:43 +0000 (14:58 +0200)]
arm64: dts: qcom: sc8280xp: add TCSR node
Add the TCSR node which is needed for PCIe configuration.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221024125843.25261-1-johan+linaro@kernel.org
Nikita Travkin [Thu, 20 Oct 2022 11:56:08 +0000 (11:56 +0000)]
arm64: dts: qcom: msm8916-samsung-a2015: Add vibrator
Both a2015 devices use motor drivers controlled with PWM signal.
A5 additionally has a fixed regulator that powers the driver and is
controlled by enable signal. A3 routes that enable signal to the
motor driver itself.
To simplify the description, add the motor to the common dtsi and
assume a regulator is used for both.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
[Rename the nodes to be reusable in msm8916-sansung-e2015]
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221020115255.2026-1-linmengbo0689@protonmail.com
Bryan O'Donoghue [Tue, 28 Jun 2022 12:04:35 +0000 (13:04 +0100)]
arm64: dts: qcom: msm8916: Fix lpass compat string to match yaml
The documented yaml compat string for the apq8016 is
"qcom,apq8016-lpass-cpu" not "qcom,lpass-cpu-apq8016". Looking at the other
lpass compat strings the general form is "qcom,socnum-lpass-cpu".
We need to fix both the driver and dts to match.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220628120435.3044939-3-bryan.odonoghue@linaro.org
Vladimir Lypak [Sun, 16 Oct 2022 16:15:53 +0000 (18:15 +0200)]
arm64: dts: qcom: msm8953: add MDSS
Add the MDSS, MDP and DSI nodes that are found on msm8953 SoC.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221016161554.673006-4-luca@z3ntu.xyz
Vladimir Lypak [Sun, 16 Oct 2022 16:15:52 +0000 (18:15 +0200)]
arm64: dts: qcom: msm8953: add APPS IOMMU
Add the nodes describing the iommu and its context banks that are found
on msm8953 SoCs.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221016161554.673006-3-luca@z3ntu.xyz
Caleb Connolly [Sun, 16 Oct 2022 17:29:43 +0000 (18:29 +0100)]
arm64: dts: qcom: sdm845-*: fix uart6 aliases
Some devices have been using hsuart0 as an alias for the bluetooth UART,
rename this to serial1
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221016172944.1892206-4-kc@postmarketos.org
Dylan Van Assche [Sun, 16 Oct 2022 17:29:42 +0000 (18:29 +0100)]
arm64: dts: qcom: sdm845-shift-axolotl: fix Bluetooth
Add serial1 alias, firmware name and use 4 pin UART pinmux.
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221016172944.1892206-3-kc@postmarketos.org
Caleb Connolly [Sun, 16 Oct 2022 17:29:41 +0000 (18:29 +0100)]
arm64: dts: qcom: sdm845: commonize bluetooth UART pinmux
The 4-pin configuration for UART6 is used for all or almost all SDM845
devices with built in Bluetooth. Move the pinmux configuration to
sdm845.dtsi in preparation to be removed from individual devices in
future patches.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221016172944.1892206-2-kc@postmarketos.org
Luca Weiss [Sun, 16 Oct 2022 09:00:31 +0000 (11:00 +0200)]
arm64: dts: qcom: sc7280: Fix cpufreq-epss compatible
The bindings require a SoC-specific compatible to be used next to
qcom,cpufreq-epss. Add it to make dtbs_check happy.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221016090035.565350-2-luca@z3ntu.xyz
Krzysztof Kozlowski [Thu, 13 Oct 2022 21:06:11 +0000 (17:06 -0400)]
arm64: dts: qcom: msm8998: align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221013210612.95994-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 13 Oct 2022 21:06:10 +0000 (17:06 -0400)]
arm64: dts: qcom: msm8998-oneplus-cheeseburger: fix backlight pin function
There is no "normal" function, so use "gpio" for backlight button pin
configuration.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221013210612.95994-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 13 Oct 2022 21:06:09 +0000 (17:06 -0400)]
arm64: dts: qcom: msm8998: add gpio-ranges to TLMM
Qualcomm pinctrl bindings and drivers expect gpio-ranges property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221013210612.95994-1-krzysztof.kozlowski@linaro.org
Luca Weiss [Wed, 12 Oct 2022 21:56:13 +0000 (23:56 +0200)]
arm64: dts: qcom: msm8996: remove bogus ufs_variant node
This ufs_variant node seems to be a remnant from downstream devicetree.
As it doesn't seem to be used by anything upstream, remove it from the
dtsi.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221012215613.32054-1-luca@z3ntu.xyz
Krzysztof Kozlowski [Tue, 11 Oct 2022 19:02:30 +0000 (15:02 -0400)]
arm64: dts: qcom: sdm630: align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix. All
nodes for GPIOs must also define the function property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221011190231.76784-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 11 Oct 2022 19:02:29 +0000 (15:02 -0400)]
arm64: dts: qcom: sdm630: correct I2C8 pin functions
The I2C8 pins are split into i2c8_a (GPIO30 and GPIO31) and i2c8_b
(GPIO44 and GPIO52). Correct the name of function for I2C8 pins.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221011190231.76784-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 11 Oct 2022 19:02:28 +0000 (15:02 -0400)]
arm64: dts: qcom: sdm630: add UART pin functions
Configure UART1 and UART2 pins to respective functions in default state,
otherwise the pins might stay as GPIOs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221011190231.76784-1-krzysztof.kozlowski@linaro.org
Dmitry Torokhov [Thu, 29 Sep 2022 01:15:56 +0000 (18:15 -0700)]
arm64: dts: qcom: msm8916-samsung-a2015: fix polarity of "enable" line of NFC chip
According to s3fwrn5 driver code the "enable" GPIO line is driven "high"
when chip is not in use (mode is S3FWRN5_MODE_COLD), and is driven "low"
when chip is in use.
s3fwrn5_phy_power_ctrl():
...
gpio_set_value(phy->gpio_en, 1);
...
if (mode != S3FWRN5_MODE_COLD) {
msleep(S3FWRN5_EN_WAIT_TIME);
gpio_set_value(phy->gpio_en, 0);
msleep(S3FWRN5_EN_WAIT_TIME);
}
Therefore the line described by "en-gpios" property should be annotated
as "active low".
The wakeup gpio appears to have correct polarity (active high).
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220929011557.4165216-2-dmitry.torokhov@gmail.com
Krzysztof Kozlowski [Wed, 28 Sep 2022 15:25:01 +0000 (17:25 +0200)]
dt-bindings: qcom: document preferred compatible naming
Compatibles can come in two formats. Either "vendor,ip-soc" or
"vendor,soc-ip". Qualcomm bindings were mixing both of usages, so add a
DT schema file documenting preferred policy and enforcing it for all new
compatibles, except few existing patterns.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928152501.490840-1-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 28 Sep 2022 15:20:24 +0000 (17:20 +0200)]
arm64: dts: qcom: msm8996: align node names with DT schema
New slimbus DT schema expect only SLIMbus bus nodes to be named
"slimbus". In case of Qualcomm SLIMbus NGD, the bus node is what was
called "ngd".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928152027.489543-9-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 28 Sep 2022 15:20:23 +0000 (17:20 +0200)]
arm64: dts: qcom: sdm845: align node names with DT schema
New slimbus DT schema expect only SLIMbus bus nodes to be named
"slimbus". In case of Qualcomm SLIMbus NGD, the bus node is what was
called "ngd".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928152027.489543-8-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 28 Sep 2022 15:20:22 +0000 (17:20 +0200)]
arm64: dts: qcom: msm8996: drop unused slimbus dmas
Bindings document only two DMA channels. Linux driver also does not use
remaining rx2/tx2.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928152027.489543-7-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 28 Sep 2022 15:20:21 +0000 (17:20 +0200)]
arm64: dts: qcom: sdm845: drop unused slimbus dmas
Bindings document only two DMA channels. Linux driver also does not use
remaining rx2/tx2.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928152027.489543-6-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 28 Sep 2022 15:20:20 +0000 (17:20 +0200)]
arm64: dts: qcom: mms8996: correct slimbus children unit addresses
Correct slimbus address/size cells to match bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928152027.489543-5-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 28 Sep 2022 15:20:19 +0000 (17:20 +0200)]
arm64: dts: qcom: sdm845: correct slimbus children unit addresses
slimbus uses address-cells=2, so correct children unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928152027.489543-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 28 Sep 2022 15:20:18 +0000 (17:20 +0200)]
arm64: dts: qcom: msm8996: drop unused slimbus reg-mames
Drop undocumented reg-names from slimbus node - there is only one
address range and Linux implementation does not use it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928152027.489543-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 28 Sep 2022 15:20:17 +0000 (17:20 +0200)]
arm64: dts: qcom: sdm845: drop unused slimbus properties
Drop properties from slimbus node: unneeded status and
downstream-related qcom,apps-ch-pipes/qcom,ea-pc (not documented, not
used).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928152027.489543-2-krzysztof.kozlowski@linaro.org
Robert Marko [Tue, 27 Sep 2022 20:14:15 +0000 (22:14 +0200)]
arm64: dts: qcom: cp01-c1: use "okay" instead of "ok"
Use "okay" instead of "ok" in USB nodes as "ok" is deprecated.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927201415.1265191-2-robimarko@gmail.com
Robert Marko [Tue, 27 Sep 2022 20:14:14 +0000 (22:14 +0200)]
arm64: dts: qcom: cp01-c1: remove bootargs-append
bootargs-append is a leftover from the vendor SDK, and does not exist
in the mainline kernel at all, so remove it.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927201415.1265191-1-robimarko@gmail.com
Robert Marko [Tue, 27 Sep 2022 20:12:18 +0000 (22:12 +0200)]
arm64: dts: qcom: ipq6018: move ARMv8 timer out of SoC node
The ARM timer is usually considered not part of SoC node, just like
other ARM designed blocks (PMU, PSCI). This fixes dtbs_check warning:
arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dtb: soc: timer: {'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 2, 3848], [1, 3, 3848], [1, 4, 3848], [1, 1, 3848]]} should not be valid under {'type': 'object'}
From schema: dtschema/schemas/simple-bus.yaml
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927201218.1264506-2-robimarko@gmail.com
Robert Marko [Tue, 27 Sep 2022 20:12:17 +0000 (22:12 +0200)]
arm64: dts: qcom: ipq6018: fix NAND node name
Per schema it should be nand-controller@
79b0000 instead of nand@
79b0000.
Fix it to match nand-controller.yaml requirements.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927201218.1264506-1-robimarko@gmail.com
Dmitry Baryshkov [Sat, 24 Sep 2022 09:01:08 +0000 (12:01 +0300)]
arm64: dts: qcom: sm8250: change DSI PHY node name to generic one
Change DSI PHY node names from custom 'dsi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924090108.166934-10-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sat, 24 Sep 2022 09:01:07 +0000 (12:01 +0300)]
arm64: dts: qcom: sdm845: change DSI PHY node name to generic one
Change DSI PHY node names from custom 'dsi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924090108.166934-9-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sat, 24 Sep 2022 09:01:06 +0000 (12:01 +0300)]
arm64: dts: qcom: sdm660: change DSI PHY node name to generic one
Change DSI PHY node names from custom 'dsi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924090108.166934-8-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sat, 24 Sep 2022 09:01:05 +0000 (12:01 +0300)]
arm64: dts: qcom: sdm630: change DSI PHY node name to generic one
Change DSI PHY node names from custom 'dsi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924090108.166934-7-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sat, 24 Sep 2022 09:01:04 +0000 (12:01 +0300)]
arm64: dts: qcom: sc7180: change DSI PHY node name to generic one
Change DSI PHY node names from custom 'dsi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924090108.166934-6-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sat, 24 Sep 2022 09:01:03 +0000 (12:01 +0300)]
arm64: dts: qcom: msm8996: change DSI PHY node name to generic one
Change DSI PHY node names from custom 'dsi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924090108.166934-5-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sat, 24 Sep 2022 09:01:02 +0000 (12:01 +0300)]
arm64: dts: qcom: msm8916: change DSI PHY node name to generic one
Change DSI PHY node names from custom 'dsi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924090108.166934-4-dmitry.baryshkov@linaro.org
Johan Hovold [Wed, 21 Sep 2022 08:00:50 +0000 (10:00 +0200)]
arm64: dts: qcom: sc8280xp: add rpmh-stats node
Add a node describing the RPMh shared memory that can be used to
retrieve statistics for the SoC low-power modes.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220921080050.21383-1-johan+linaro@kernel.org
Konrad Dybcio [Wed, 21 Sep 2022 00:47:41 +0000 (02:47 +0200)]
arm64: dts: qcom: msm8998-yoshino: Fix up SMD regulators formatting
Add a new line between each subnode and make the { } consistent.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220921004741.152765-1-konrad.dybcio@somainline.org
Dmitry Baryshkov [Mon, 19 Sep 2022 19:00:37 +0000 (22:00 +0300)]
arm64: dts: qcom: nile: correct firmware paths
Correct firmware paths for the Sony Xperia Nile devices to include the
SoC name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919190037.2122284-7-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Mon, 19 Sep 2022 19:00:36 +0000 (22:00 +0300)]
arm64: dts: qcom: pdx223: correct firmware paths
Correct firmware paths for the Sony Xperia 1 IV to include the SoC name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919190037.2122284-6-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Mon, 19 Sep 2022 19:00:35 +0000 (22:00 +0300)]
arm64: dts: qcom: sagami: correct firmware paths
Correct firmware paths for the Sony Xperia Sagami devices to include the
SoC name, vendor and platform names.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919190037.2122284-5-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Mon, 19 Sep 2022 19:00:34 +0000 (22:00 +0300)]
arm64: dts: qcom: ifc6560: correct firmware paths
Correct firmware paths for the Inforce IFC6560 to include the SoC name.
Do not include the platform name, since the board uses test-signed
firmware.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919190037.2122284-4-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Mon, 19 Sep 2022 19:00:33 +0000 (22:00 +0300)]
arm64: dts: qcom: miix-630: correct firmware paths
Correct firmware paths for the Lenovo Miix 630 to include the SoC name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919190037.2122284-3-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Mon, 19 Sep 2022 19:00:32 +0000 (22:00 +0300)]
arm64: dts: qcom: w737: correct firmware paths
Correct firmware paths for the Samsung Galaxy Book2 to include the SoC
name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919190037.2122284-2-dmitry.baryshkov@linaro.org
Joel Selvaraj [Fri, 9 Sep 2022 03:54:47 +0000 (22:54 -0500)]
arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce Xiaomi Poco F1 EBBG variant
Introduce support for the Xiaomi Poco F1 EBBG variant. The EBBG variant
uses EBBG FT8719 panel manufactured by EBBG.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220909035447.36674-4-joelselvaraj.oss@gmail.com
Joel Selvaraj [Fri, 9 Sep 2022 03:54:46 +0000 (22:54 -0500)]
dt-bindings: arm: qcom: Add Xiaomi Poco F1 EBBG variant bindings
Add documentation for "xiaomi,beryllium-ebbg" device.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220909035447.36674-3-joelselvaraj.oss@gmail.com
Joel Selvaraj [Fri, 9 Sep 2022 03:54:45 +0000 (22:54 -0500)]
arm64: dts: qcom: split beryllium dts into common dtsi and tianma dts
There are two panel variants of Xiaomi Poco F1. Tianma and EBBG panel.
The previous beryllium dts supported the Tianma variant. In order to
add support for EBBG variant, the common nodes from beryllium dts are
moved to a new common dtsi and to make the variants distinguishable,
sdm845-xiaomi-beryllium.dts is now named as
sdm845-xiaomi-beryllium-tianma.dts. The model property is updated to
distinguish between the variants. The compatibility property is
moved to the tianma variant, but it is not updated to avoid any
further conflict with other projects/users that might depend on it.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220909035447.36674-2-joelselvaraj.oss@gmail.com
Dmitry Baryshkov [Thu, 8 Sep 2022 22:28:50 +0000 (01:28 +0300)]
arm64: dts: qcom: sm8450: add display clock controller
Add device node for display clock controller on Qualcomm SM8450 platform
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220908222850.3552050-5-dmitry.baryshkov@linaro.org
Krzysztof Kozlowski [Thu, 8 Sep 2022 08:09:37 +0000 (10:09 +0200)]
arm64: dts: qcom: use generic node name "gpio" in SPMI PMIC
GPIO controller nodes are named by convention just "gpio", not "gpios".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220908080938.29199-2-krzysztof.kozlowski@linaro.org
Rajeev Nandan [Wed, 7 Sep 2022 11:35:53 +0000 (17:05 +0530)]
arm64: dts: qcom: sc7280: assign DSI clock source parents
Assign DSI clock source parents to DSI PHY clocks.
Signed-off-by: Rajeev Nandan <quic_rajeevny@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1662550553-28933-1-git-send-email-quic_rajeevny@quicinc.com
Bryan O'Donoghue [Wed, 7 Sep 2022 00:01:05 +0000 (01:01 +0100)]
arm64: dts: qcom: sm8250: Drop redundant phy-names from DSI controller
phy-names has been marked deprecated. Remove it from the sm8250 DSI
controller block.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220907000105.786265-12-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Wed, 7 Sep 2022 00:01:04 +0000 (01:01 +0100)]
arm64: dts: qcom: sdm845: Drop redundant phy-names from DSI controller
phy-names has been marked deprecated. Remove it from the sdm845 DSI
controller block.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220907000105.786265-11-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Wed, 7 Sep 2022 00:01:03 +0000 (01:01 +0100)]
arm64: dts: qcom: sdm630: Drop redundant phy-names from DSI controller
phy-names has been marked deprecated. Remove it from the sdm630 DSI
controller block.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220907000105.786265-10-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Wed, 7 Sep 2022 00:01:02 +0000 (01:01 +0100)]
arm64: dts: qcom: sdm660: Drop redundant phy-names from DSI controller
phy-names has been marked deprecated. Remove it from the sdm660 DSI
controller block.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220907000105.786265-9-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Wed, 7 Sep 2022 00:01:01 +0000 (01:01 +0100)]
arm64: dts: qcom: sc7280: Drop redundant phy-names from DSI controller
phy-names has been marked deprecated. Remove it from the sc7280 DSI
controller block.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220907000105.786265-8-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Wed, 7 Sep 2022 00:01:00 +0000 (01:01 +0100)]
arm64: dts: qcom: sc7180: Drop redundant phy-names from DSI controller
phy-names has been marked deprecated. Remove it from the sc7180 DSI
controller block.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220907000105.786265-7-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Wed, 7 Sep 2022 00:00:59 +0000 (01:00 +0100)]
arm64: dts: qcom: msm8996: Drop redundant phy-names from DSI controller
phy-names has been marked deprecated. Remove it from the msm8996 DSI
controller block.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220907000105.786265-6-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Wed, 7 Sep 2022 00:00:58 +0000 (01:00 +0100)]
arm64: dts: qcom: msm8916: Drop redundant phy-names from DSI controller
phy-names has been marked deprecated. Remove it from the msm8916 DSI
controller block.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220907000105.786265-5-bryan.odonoghue@linaro.org
Krishna Kurapati [Tue, 6 Sep 2022 16:15:33 +0000 (21:45 +0530)]
arm64: dts: qcom: sc7280: Update SNPS Phy params for SC7280 IDP device
Overriding the SNPS Phy tuning parameters for SC7280 IDP device.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1662480933-12326-4-git-send-email-quic_kriskura@quicinc.com
Matthias Kaehlcke [Thu, 1 Sep 2022 17:29:50 +0000 (10:29 -0700)]
arm64: dts: qcom: sc7180: Configure USB as wakeup source
The dwc3 USB controller of the sc7180 supports USB remote
wakeup, configure it as a wakeup source.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220901102946.v2.1.I347ea409ee3134bd32a29e33fecd1a6ef32085a0@changeid
Vladimir Zapolskiy [Thu, 1 Sep 2022 07:35:04 +0000 (10:35 +0300)]
arm64: dts: qcom: sm8450: Add description of camera control interfaces
Add description of two CCI controllers found on QCOM SM8450.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220901073504.3077363-1-vladimir.zapolskiy@linaro.org
Yunlong Jia [Thu, 1 Sep 2022 02:49:58 +0000 (02:49 +0000)]
arm64: dts: qcom: Add sc7180-pazquel360
Create first version device tree for pazquel360
pazquel360 is convertible and the pazquel it is based on is clamshell.
sku 20 for lte & wifi
sku 21 for wifi only
sku 22 for lte w/o esim & wifi
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220901024827.v3.2.Iea2d2918adfff2825b87d428b5732717425c196f@changeid
Yunlong Jia [Thu, 1 Sep 2022 02:49:57 +0000 (02:49 +0000)]
dt-bindings: arm: qcom: Document additional skus for sc7180 pazquel360
pazquel360 is an extension project based on pazquel.
We create 3 sku on pazquel360:
sku 20 for LTE with physical SIM _and_ eSIM and WiFi
sku 21 for WiFi only
sku 22 for LTE with only a physical SIM
Both sku20 and sku22 are LTE SKUs.
One has the eSIM stuffed and one doesn't.
There is a single shared device tree for the two.
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220901024827.v3.1.I3aa360986c0e7377ea5e96c116f014ff1ab8c968@changeid
Dmitry Baryshkov [Wed, 10 Aug 2022 03:54:22 +0000 (22:54 -0500)]
arm64: dts: qcom: sdm845: add displayport node
Add displayport controller device node, describing DisplayPort hardware
block on SDM845.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220810035424.2796777-3-bjorn.andersson@linaro.org
Dmitry Baryshkov [Wed, 10 Aug 2022 03:54:21 +0000 (22:54 -0500)]
arm64: dts: qcom: sdm845: switch usb_1 phy to use combo usb+dp phy
Change sdm845's usb_1_qmpphy to use combo usb+dp phy bindings, rather
than just usb phy.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220810035424.2796777-2-bjorn.andersson@linaro.org
Stephan Gerhold [Mon, 18 Jul 2022 14:03:40 +0000 (16:03 +0200)]
arm64: dts: qcom: msm8916: Drop MSS fallback compatible
MSM8916 was originally using the "qcom,q6v5-pil" compatible for the
MSS remoteproc. Later it was decided to use SoC-specific compatibles
instead, so "qcom,msm8916-mss-pil" is now the preferred compatible.
Commit
60a05ed059a0 ("arm64: dts: qcom: msm8916: Add MSM8916-specific
compatibles to SCM/MSS") updated the MSM8916 device tree to make use of
the new compatible but still kept the old "qcom,q6v5-pil" as fallback.
This is inconsistent with other SoCs and conflicts with the description
in the binding documentation (which says that only one compatible should
be present). Also, it has no functional advantage since older kernels
could not handle this DT anyway (e.g. "power-domains" in the MSS node is
only supported by kernels that also support "qcom,msm8916-mss-pil").
Make this consistent with other SoCs by using only the
"qcom,msm8916-mss-pil" compatible.
Fixes:
60a05ed059a0 ("arm64: dts: qcom: msm8916: Add MSM8916-specific compatibles to SCM/MSS")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220718140344.1831731-2-stephan.gerhold@kernkonzept.com
Krzysztof Kozlowski [Mon, 19 Sep 2022 16:33:33 +0000 (18:33 +0200)]
arm64: dts: qcom: correct white-space before {
Add missing space or remove redundant one before opening {.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919163333.129989-1-krzysztof.kozlowski@linaro.org
Konrad Dybcio [Sat, 8 Oct 2022 18:17:13 +0000 (20:17 +0200)]
arm64: dts: qcom: sm8250-edo: Add NXP PN553 NFC
Add a node for NXP PN553 NFC, using the nxp-nci driver.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221008181714.253634-1-konrad.dybcio@somainline.org
Krzysztof Kozlowski [Mon, 10 Oct 2022 11:44:14 +0000 (07:44 -0400)]
arm64: dts: qcom: sdm845-cheza: fix AP suspend pin bias
There is no "bias-no-pull" property. Assume intentions were disabling
bias.
Fixes:
79e7739f7b87 ("arm64: dts: qcom: sdm845-cheza: add initial cheza dt")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221010114417.29859-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 10 Oct 2022 11:44:13 +0000 (07:44 -0400)]
arm64: dts: qcom: sdm845-db845c: correct SPI2 pins drive strength
The pin configuration (done with generic pin controller helpers and
as expressed by bindings) requires children nodes with either:
1. "pins" property and the actual configuration,
2. another set of nodes with above point.
The qup_spi2_default pin configuration uses alreaady the second method
with a "pinmux" child, so configure drive-strength similarly in
"pinconf". Otherwise the PIN drive strength would not be applied.
Fixes:
8d23a0040475 ("arm64: dts: qcom: db845c: add Low speed expansion i2c and spi nodes")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221010114417.29859-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 10 Oct 2022 11:44:12 +0000 (07:44 -0400)]
arm64: dts: qcom: sdm630: fix UART1 pin bias
There is no "bias-no-pull" property. Assume intentions were disabling
bias.
Fixes:
b190fb010664 ("arm64: dts: qcom: sdm630: Add sdm630 dts file")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221010114417.29859-1-krzysztof.kozlowski@linaro.org
Robert Marko [Thu, 18 Aug 2022 22:18:15 +0000 (00:18 +0200)]
arm64: dts: qcom: ipq8074-hk01: add VQMMC supply
Since now we have control over the PMP8074 PMIC providing various system
voltages including L11 which provides the SDIO/eMMC I/O voltage set it as
the SDHCI VQMMC supply.
This allows SDHCI controller to switch to 1.8V I/O mode and support high
speed modes like HS200 and HS400.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818221815.346233-5-robimarko@gmail.com
Robert Marko [Thu, 18 Aug 2022 22:18:14 +0000 (00:18 +0200)]
arm64: dts: qcom: add PMP8074 DTSI
PMP8074 is a companion PMIC to the Qualcomm IPQ8074 series that is
controlled via SPMI.
Add DTSI for it providing GPIO, regulator, RTC and VADC support.
RTC is disabled by default as there is no built-in battery so it will
loose time unless board vendor added a battery, so make it optional.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818221815.346233-4-robimarko@gmail.com
Robert Marko [Thu, 18 Aug 2022 22:08:49 +0000 (00:08 +0200)]
arm64: dts: qcom: ipq8074: add clocks to APCS
APCS now has support for providing the APSS clocks as the child device
for IPQ8074.
So, add the A53 PLL and XO clocks in order to use APCS as the CPU
clocksource for APSS scaling.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220849.339732-4-robimarko@gmail.com
Bjorn Andersson [Mon, 17 Oct 2022 19:40:27 +0000 (14:40 -0500)]
Merge branch '
20220818220628.339366-8-robimarko@gmail.com' into HEAD
Robert Marko [Thu, 18 Aug 2022 22:02:45 +0000 (00:02 +0200)]
arm64: dts: qcom: ipq8074: add thermal nodes
IPQ8074 has a tsens v2.3.0 peripheral which monitors
temperatures around the various subsystems on the
die.
So lets add the tsens and thermal zone nodes, passive
CPU cooling will come in later patches after CPU frequency
scaling is supported.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220245.338396-5-robimarko@gmail.com
Dmitry Baryshkov [Sun, 24 Jul 2022 14:04:21 +0000 (17:04 +0300)]
arm64: dts: qcom: msm8996pro: expand Adreno OPP table
There are minor differeces between msm8996 and msm8996pro in terms of
GPU frequencies support. For example msm8996pro supports 652.8 MHz
frequency for the Adreno. Reclect these differences in msm8996pro.dtsi.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-8-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sun, 24 Jul 2022 14:04:20 +0000 (17:04 +0300)]
arm64: dts: qcom: msm8996: fix GPU OPP table
Fix Adreno OPP table according to the msm-3.18. Enable 624 MHz for the
speed bin 3 and 560 MHz for bins 2 and 3.
Fixes:
69cc3114ab0f ("arm64: dts: Add Adreno GPU definitions")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-7-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sun, 24 Jul 2022 14:04:19 +0000 (17:04 +0300)]
arm64: dts: qcom: msm8996: add support for speed bin 3
Add support for msm8996, speed bin 3. It supports full range of
frequencies on the power cluster, but is limited to 1.8 GHz on
performance cluster.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-6-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sun, 24 Jul 2022 14:04:18 +0000 (17:04 +0300)]
arm64: dts: qcom: msm8996: fix supported-hw in cpufreq OPP tables
Adjust MSM8996 cpufreq tables according to tables in msm-3.18. Some of
the frequencies are not supported on speed bins other than 0. Also other
speed bins support intermediate topmost frequencies, not supported on
speed bin 0. Implement all these differencies.
Fixes:
90173a954a22 ("arm64: dts: qcom: msm8996: Add CPU opps")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-5-dmitry.baryshkov@linaro.org
Yassine Oudjana [Sun, 24 Jul 2022 14:04:17 +0000 (17:04 +0300)]
arm64: dts: qcom: msm8996-xiaomi-scorpio, natrium: Use MSM8996 Pro
The Xiaomi Mi Note 2 has the MSM8996 Pro SoC. Rename the dts
to match, include msm8996pro.dtsi, and add the qcom,msm8996pro
compatible. To do that, the msm8996.dtsi include in msm8996-xiaomi-common
has to be moved to msm8996-xiaomi-gemini, the only device that needs it
included after this change.
Since MSM8996Pro is largely compatible with MSM8996, keep old compatible
too rather than insiting on qcom,msm8996pro only. This allows the code
that doesn't yet know about msm8996pro to continue supporting these
devices.
[DB: Dropped msm-id changes.]
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
[DB: Applied the same change to Xiaomi Mi 5s Plus (natrium).]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-4-dmitry.baryshkov@linaro.org
Yassine Oudjana [Sun, 24 Jul 2022 14:04:16 +0000 (17:04 +0300)]
arm64: dts: qcom: msm8996: Add MSM8996 Pro support
Qualcomm MSM8996 Pro is a variant of MSM8996 with higher frequencies
supported both on CPU and GPU. There are other minor hardware
differencies in the CPU and GPU regulators and bus fabrics.
However this results in significant differences between 8996 and 8996
Pro CPU OPP tables. Judging from msm-3.18 there are only few common
frequencies supported by both msm8996 and msm8996pro. Rather than
hacking the tables for msm8996, split msm8996pro support into a separate
file. Later this would allow having additional customizations for the
CBF, CPR, retulators, etc.
[DB: dropped all non-CPU-OPP changes]
Fixes:
90173a954a22 ("arm64: dts: qcom: msm8996: Add CPU opps")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
[DB: Realigned supported-hw to keep compat with current cpufreq driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-3-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sun, 24 Jul 2022 14:04:15 +0000 (17:04 +0300)]
dt-bindings: arm: qcom: separate msm8996pro bindings
Xiaomi Mi 5s Plus (natrium) and Xiaomi Mi Note 2 (scorpio) use
MSM8996Pro rather than plain MSM8996. Describe this in the arm/qcom.yaml
bindings.
Since MSM8996Pro is largely compatible with MSM8996, keep old compatible
too rather than insiting on qcom,msm8996pro only. This allows the code
that doesn't yet know about msm8996pro to continue supporting these
devices.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-2-dmitry.baryshkov@linaro.org
Judy Hsiao [Thu, 21 Jul 2022 08:38:49 +0000 (08:38 +0000)]
arm64: dts: qcom: sc7280: Include sc7280-herobrine-audio-rt5682.dtsi in herobrine-r1
Include sc7280-herobrine-audio-rt5682.dtsi in herobrine-r1
as it uses rt5682 codec.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220721083849.1571744-4-judyhsiao@chromium.org
Judy Hsiao [Thu, 21 Jul 2022 08:38:48 +0000 (08:38 +0000)]
arm64: dts: qcom: sc7280: Add sc7280-herobrine-audio-rt5682.dtsi
Audio dtsi for sc7280 boards that using rt5682 headset codec:
1. Add dt nodes for sound card which use I2S playback and record
through rt5682s and I2S playback through max98357a.
2. Enable lpass cpu node and add pin control and dai-links.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220721083849.1571744-3-judyhsiao@chromium.org
Judy Hsiao [Thu, 21 Jul 2022 08:38:47 +0000 (08:38 +0000)]
arm64: dts: qcom: sc7280: herobrine: Add pinconf settings for mi2s1
1. Add drive strength property for mi2s1 on sc7280 based platforms.
2. Disable the pull-up for mi2s1 lines.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220721083849.1571744-2-judyhsiao@chromium.org
Robert Marko [Thu, 18 Aug 2022 22:06:27 +0000 (00:06 +0200)]
arm64: dts: qcom: ipq8074: correct APCS register space size
APCS DTS addition that was merged, was not supposed to get merged as it
was part of patch series that was superseded by 2 more patch series
that resolved issues with this one and greatly simplified things.
Since it already got merged, start by correcting the register space
size as APCS will not be providing regmap for PLL and it will conflict
with the standalone A53 PLL node.
Fixes:
50ed9fffec3a ("arm64: dts: qcom: ipq8074: add APCS node")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220628.339366-8-robimarko@gmail.com
Rajendra Nayak [Tue, 27 Sep 2022 10:42:33 +0000 (16:12 +0530)]
arm64: dts: qcom: sc7280: Add required-opps for i2c
qup-i2c devices on sc7280 are clocked with a fixed clock (19.2 MHz)
Though qup-i2c does not support DVFS, it still needs to vote for a
performance state on 'CX' to satisfy the 19.2 Mhz clock frequency
requirement.
Use 'required-opps' to pass this information from
device tree, and also add the power-domains property to specify
the CX power-domain.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927104233.29376-1-quic_rjendra@quicinc.com
Rajendra Nayak [Tue, 27 Sep 2022 10:26:46 +0000 (15:56 +0530)]
arm64: dts: qcom: sc7180: Add required-opps for USB
USB has a requirement to put a performance state vote on 'cx'
while active. Use 'required-opps' to pass this information from
device tree, and since all the GDSCs in GCC (including USB) are
sub-domains of cx, we also add cx as a power-domain for GCC.
Now when any of the consumers of the GDSCs (in this case USB)
votes on a perforamance state, genpd framework can identify that
the GDSC itself does not support a performance state and it
then propogates the vote to the parent, which in this case is cx.
This change would also mean that any GDSC in GCC thats left enabled
during low power state (perhaps because its marked with a
ALWAYS_ON flag) can prevent the system from entering low power
since that would prevent cx from transitioning to low power.
Ideally any consumers that would need to have their devices
(partially) powered to support wakeups should look at making the
resp. GDSCs transtion to a Retention (PWRSTS_RET) state instead
of leaving them ALWAYS_ON.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927102646.14785-1-quic_rjendra@quicinc.com