OSDN Git Service
Trond Myklebust [Tue, 16 Jul 2019 17:51:29 +0000 (13:51 -0400)]
SUNRPC: Fix up backchannel slot table accounting
Add a per-transport maximum limit in the socket case, and add
helpers to allow the NFSv4 code to discover that limit.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Thu, 18 Jul 2019 05:10:51 +0000 (01:10 -0400)]
SUNRPC: Fix initialisation of struct rpc_xprt_switch
Ensure that we do initialise the fields xps_nactive, xps_queuelen
and xps_net.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Tue, 16 Jul 2019 11:07:28 +0000 (07:07 -0400)]
SUNRPC: Skip zero-refcount transports
When looking for the next transport to use for an RPC call, skip those
that are in the process of being destroyed and that have a zero refcount.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Mon, 15 Jul 2019 19:12:08 +0000 (15:12 -0400)]
SUNRPC: Replace division by multiplication in calculation of queue length
When checking whether or not a particular xprt queue length is shorter
than the average queue length for all xprts, prefer to use multiplication
rather than division for performance reasons.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Thu, 11 Jul 2019 23:02:18 +0000 (19:02 -0400)]
NFSv4: Validate the stateid before applying it to state recovery
If the stateid is the zero or invalid stateid, then it is pointless
to attempt to use it for recovery. In that case, try to fall back
to using the open state stateid, or just doing a general recovery
of all state on a given inode.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Donald Buczek [Sun, 7 Jul 2019 19:26:10 +0000 (21:26 +0200)]
nfs4.0: Refetch lease_time after clientid update
RFC 7530 requires us to refetch the lease time attribute once a new
clientID is established. This is already implemented for the
nfs4.1(+) clients by nfs41_init_clientid, which calls
nfs41_finish_session_reset, which calls nfs4_setup_state_renewal.
To make nfs4_setup_state_renewal available for nfs4.0, move it
further to the top of the source file to include it regardles of
CONFIG_NFS_V4_1 and to save a forward declaration.
Call nfs4_setup_state_renewal from nfs4_init_clientid.
Signed-off-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Donald Buczek [Sun, 7 Jul 2019 19:26:09 +0000 (21:26 +0200)]
nfs4: Rename nfs41_setup_state_renewal
The function nfs41_setup_state_renewal is useful to the nfs 4.0 client
as well, so rename the function to nfs4_setup_state_renewal.
Signed-off-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Donald Buczek [Sun, 7 Jul 2019 19:26:08 +0000 (21:26 +0200)]
nfs4: Make nfs4_proc_get_lease_time available for nfs4.0
Compile nfs4_proc_get_lease_time, enc_get_lease_time and
dec_get_lease_time for nfs4.0. Use nfs4_sequence_done instead of
nfs41_sequence_done in nfs4_proc_get_lease_time,
Signed-off-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Donald Buczek [Sun, 7 Jul 2019 19:26:07 +0000 (21:26 +0200)]
nfs: Fix copy-and-paste error in debug message
The debug message of decode_attr_lease_time incorrectly
says "file size". Fix it to "lease time".
Signed-off-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Markus Elfring [Wed, 3 Jul 2019 13:50:37 +0000 (15:50 +0200)]
NFS: Replace 16 seq_printf() calls by seq_puts()
Some strings should be put into a sequence.
Thus use the corresponding function “seq_puts”.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Markus Elfring [Wed, 3 Jul 2019 13:33:09 +0000 (15:33 +0200)]
NFS: Use seq_putc() in nfs_show_stats()
A single character (line break) should be put into a sequence.
Thus use the corresponding function “seq_putc”.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Max Kellermann [Fri, 12 Jul 2019 14:18:06 +0000 (16:18 +0200)]
Revert "NFS: readdirplus optimization by cache mechanism" (memleak)
This reverts commit
be4c2d4723a4a637f0d1b4f7c66447141a4b3564.
That commit caused a severe memory leak in nfs_readdir_make_qstr().
When listing a directory with more than 100 files (this is how many
struct nfs_cache_array_entry elements fit in one 4kB page), all
allocated file name strings past those 100 leak.
The root of the leakage is that those string pointers are managed in
pages which are never linked into the page cache.
fs/nfs/dir.c puts pages into the page cache by calling
read_cache_page(); the callback function nfs_readdir_filler() will
then fill the given page struct which was passed to it, which is
already linked in the page cache (by do_read_cache_page() calling
add_to_page_cache_lru()).
Commit
be4c2d4723a4 added another (local) array of allocated pages, to
be filled with more data, instead of discarding excess items received
from the NFS server. Those additional pages can be used by the next
nfs_readdir_filler() call (from within the same nfs_readdir() call).
The leak happens when some of those additional pages are never used
(copied to the page cache using copy_highpage()). The pages will be
freed by nfs_readdir_free_pages(), but their contents will not. The
commit did not invoke nfs_readdir_clear_array() (and doing so would
have been dangerous, because it did not track which of those pages
were already copied to the page cache, risking double free bugs).
How to reproduce the leak:
- Use a kernel with CONFIG_SLUB_DEBUG_ON.
- Create a directory on a NFS mount with more than 100 files with
names long enough to use the "kmalloc-32" slab (so we can easily
look up the allocation counts):
for i in `seq 110`; do touch ${i}_0123456789abcdef; done
- Drop all caches:
echo 3 >/proc/sys/vm/drop_caches
- Check the allocation counter:
grep nfs_readdir /sys/kernel/slab/kmalloc-32/alloc_calls
30564391 nfs_readdir_add_to_array+0x73/0xd0 age=534558/
4791307/
6540952 pid=370-
1048386 cpus=0-47 nodes=0-1
- Request a directory listing and check the allocation counters again:
ls
[...]
grep nfs_readdir /sys/kernel/slab/kmalloc-32/alloc_calls
30564511 nfs_readdir_add_to_array+0x73/0xd0 age=207/
4792999/
6542663 pid=370-
1048386 cpus=0-47 nodes=0-1
There are now 120 new allocations.
- Drop all caches and check the counters again:
echo 3 >/proc/sys/vm/drop_caches
grep nfs_readdir /sys/kernel/slab/kmalloc-32/alloc_calls
30564401 nfs_readdir_add_to_array+0x73/0xd0 age=735/
4793524/
6543176 pid=370-
1048386 cpus=0-47 nodes=0-1
110 allocations are gone, but 10 have leaked and will never be freed.
Unhelpfully, those allocations are explicitly excluded from KMEMLEAK,
that's why my initial attempts with KMEMLEAK were not successful:
/*
* Avoid a kmemleak false positive. The pointer to the name is stored
* in a page cache page which kmemleak does not scan.
*/
kmemleak_not_leak(string->name);
It would be possible to solve this bug without reverting the whole
commit:
- keep track of which pages were not used, and call
nfs_readdir_clear_array() on them, or
- manually link those pages into the page cache
But for now I have decided to just revert the commit, because the real
fix would require complex considerations, risking more dangerous
(crash) bugs, which may seem unsuitable for the stable branches.
Signed-off-by: Max Kellermann <mk@cm4all.com>
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Thu, 11 Jul 2019 20:33:12 +0000 (16:33 -0400)]
SUNRPC: Fix transport accounting when caller specifies an rpc_xprt
Ensure that we do the required accounting for the round robin queue
when the caller to rpc_init_task() has passed in a transport to be
used.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Reported-by: Neil Brown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Thu, 11 Jul 2019 20:52:47 +0000 (16:52 -0400)]
Merge tag 'nfs-rdma-for-5.3-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
NFSoRDMA client updates for 5.3
New features:
- Add a way to place MRs back on the free list
- Reduce context switching
- Add new trace events
Bugfixes and cleanups:
- Fix a BUG when tracing is enabled with NFSv4.1
- Fix a use-after-free in rpcrdma_post_recvs
- Replace use of xdr_stream_pos in rpcrdma_marshal_req
- Fix occasional transport deadlock
- Fix show_nfs_errors macros, other tracing improvements
- Remove RPCRDMA_REQ_F_PENDING and fr_state
- Various simplifications and refactors
Chuck Lever [Wed, 19 Jun 2019 14:34:09 +0000 (10:34 -0400)]
NFS: Record task, client ID, and XID in xdr_status trace points
When triggering an nfs_xdr_status trace point, record the task ID
and XID of the failing RPC to better pinpoint the problem.
This feels like a bit of a layering violation.
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Jun 2019 14:34:03 +0000 (10:34 -0400)]
NFS: Update symbolic flags displayed by trace events
Add missing symbolic flag names and display flags variables in
hexadecimal to improve observability.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Jun 2019 14:33:58 +0000 (10:33 -0400)]
NFS: Display symbolic status code names in trace log
For improved readability, add nfs_show_status() call-sites in the
generic NFS trace points so that the symbolic status code name is
displayed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Jun 2019 14:33:53 +0000 (10:33 -0400)]
NFS: Fix show_nfs_errors macros again
I noticed that NFS status values stopped working again.
trace_print_symbols_seq() takes an unsigned long. Passing a negative
errno or negative NFSERR value just confuses it, and since we're
using C macros here and not static inline functions, all bets are
off due to implicit type conversion.
Straight-line the calling conventions so that error codes are stored
in the trace record as positive values in an unsigned long field,
mapped to symbolic as an unsigned long, and displayed as a negative
value, to continue to enable grepping on "error=-".
It's often the case that an error value that is positive is a byte
count but when it's negative, it's an error (e.g. nfs4_write). Fix
those cases so that the value that is eventually stored in the
error field is a positive NFS status or errno, or zero.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Jun 2019 14:33:47 +0000 (10:33 -0400)]
NFS4: Add a trace event to record invalid CB sequence IDs
Help debug NFSv4 callback failures.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Jun 2019 14:33:42 +0000 (10:33 -0400)]
xprtrdma: Modernize ops->connect
Adapt and apply changes that were made to the TCP socket connect
code. See the following commits for details on the purpose of
these changes:
Commit
7196dbb02ea0 ("SUNRPC: Allow changing of the TCP timeout parameters on the fly")
Commit
3851f1cdb2b8 ("SUNRPC: Limit the reconnect backoff timer to the max RPC message timeout")
Commit
02910177aede ("SUNRPC: Fix reconnection timeouts")
Some common transport code is moved to xprt.c to satisfy the code
duplication police.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Jun 2019 14:33:36 +0000 (10:33 -0400)]
xprtrdma: Remove rpcrdma_req::rl_buffer
Clean up.
There is only one remaining function, rpcrdma_buffer_put(), that
uses this field. Its caller can supply a pointer to the correct
rpcrdma_buffer, enabling the removal of an 8-byte pointer field
from a frequently-allocated shared data structure.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Jun 2019 14:33:31 +0000 (10:33 -0400)]
xprtrdma: Refactor chunk encoding
Clean up.
Move the "not present" case into the individual chunk encoders. This
improves code organization and readability.
The reason for the original organization was to optimize for the
case where there there are no chunks. The optimization turned out to
be inconsequential, so let's err on the side of code readability.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Jun 2019 14:33:26 +0000 (10:33 -0400)]
xprtrdma: Streamline rpcrdma_post_recvs
rb_lock is contended between rpcrdma_buffer_create,
rpcrdma_buffer_put, and rpcrdma_post_recvs.
Commit
e340c2d6ef2a ("xprtrdma: Reduce the doorbell rate (Receive)")
causes rpcrdma_post_recvs to take the rb_lock repeatedly when it
determines more Receives are needed. Streamline this code path so
it takes the lock just once in most cases to build the Receive
chain that is about to be posted.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Jun 2019 14:33:20 +0000 (10:33 -0400)]
xprtrdma: Simplify rpcrdma_rep_create
Clean up.
Commit
7c8d9e7c8863 ("xprtrdma: Move Receive posting to Receive
handler") reduced the number of rpcrdma_rep_create call sites to
one. After that commit, the backchannel code no longer invokes it.
Therefore the free list logic added by commit
d698c4a02ee0
("xprtrdma: Fix backchannel allocation of extra rpcrdma_reps") is
no longer necessary, and in fact adds some extra overhead that we
can do without.
Simply post any newly created reps. They will get added back to
the rb_recv_bufs list when they subsequently complete.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Jun 2019 14:33:15 +0000 (10:33 -0400)]
xprtrdma: Wake RPCs directly in rpcrdma_wc_send path
Eliminate a context switch in the path that handles RPC wake-ups
when a Receive completion has to wait for a Send completion.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Jun 2019 14:33:10 +0000 (10:33 -0400)]
xprtrdma: Reduce context switching due to Local Invalidation
Since commit
ba69cd122ece ("xprtrdma: Remove support for FMR memory
registration"), FRWR is the only supported memory registration mode.
We can take advantage of the asynchronous nature of FRWR's LOCAL_INV
Work Requests to get rid of the completion wait by having the
LOCAL_INV completion handler take care of DMA unmapping MRs and
waking the upper layer RPC waiter.
This eliminates two context switches when local invalidation is
necessary. As a side benefit, we will no longer need the per-xprt
deferred completion work queue.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Jun 2019 14:33:04 +0000 (10:33 -0400)]
xprtrdma: Add mechanism to place MRs back on the free list
When a marshal operation fails, any MRs that were already set up for
that request are recycled. Recycling releases MRs and creates new
ones, which is expensive.
Since commit
f2877623082b ("xprtrdma: Chain Send to FastReg WRs")
was merged, recycling FRWRs is unnecessary. This is because before
that commit, frwr_map had already posted FAST_REG Work Requests,
so ownership of the MRs had already been passed to the NIC and thus
dealing with them had to be delayed until they completed.
Since that commit, however, FAST_REG WRs are posted at the same time
as the Send WR. This means that if marshaling fails, we are certain
the MRs are safe to simply unmap and place back on the free list
because neither the Send nor the FAST_REG WRs have been posted yet.
The kernel still has ownership of the MRs at this point.
This reduces the total number of MRs that the xprt has to create
under heavy workloads and makes the marshaling logic less brittle.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Jun 2019 14:32:59 +0000 (10:32 -0400)]
xprtrdma: Remove fr_state
Now that both the Send and Receive completions are handled in
process context, it is safe to DMA unmap and return MRs to the
free or recycle lists directly in the completion handlers.
Doing this means rpcrdma_frwr no longer needs to track the state of
each MR, meaning that a VALID or FLUSHED MR can no longer appear on
an xprt's MR free list. Thus there is no longer a need to track the
MR's registration state in rpcrdma_frwr.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Jun 2019 14:32:54 +0000 (10:32 -0400)]
xprtrdma: Remove the RPCRDMA_REQ_F_PENDING flag
Commit
9590d083c1bb ("xprtrdma: Use xprt_pin_rqst in
rpcrdma_reply_handler") pins incoming RPC/RDMA replies so they
can be left in the pending requests queue while they are being
processed without introducing a race between ->buf_free and the
transport's reply handler. Therefore RPCRDMA_REQ_F_PENDING is no
longer necessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Jun 2019 14:32:48 +0000 (10:32 -0400)]
xprtrdma: Fix occasional transport deadlock
Under high I/O workloads, I've noticed that an RPC/RDMA transport
occasionally deadlocks (IOPS goes to zero, and doesn't recover).
Diagnosis shows that the sendctx queue is empty, but when sendctxs
are returned to the queue, the xprt_write_space wake-up never
occurs. The wake-up logic in rpcrdma_sendctx_put_locked is racy.
I noticed that both EMPTY_SCQ and XPRT_WRITE_SPACE are implemented
via an atomic bit. Just one of those is sufficient. Removing
EMPTY_SCQ in favor of the generic bit mechanism makes the deadlock
un-reproducible.
Without EMPTY_SCQ, rpcrdma_buffer::rb_flags is no longer used and
is therefore removed.
Unfortunately this patch does not apply cleanly to stable. If
needed, someone will have to port it and test it.
Fixes:
2fad659209d5 ("xprtrdma: Wait on empty sendctx queue")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Jun 2019 14:32:43 +0000 (10:32 -0400)]
xprtrdma: Replace use of xdr_stream_pos in rpcrdma_marshal_req
This is a latent bug. xdr_stream_pos works by subtracting
xdr_stream::nwords from xdr_buf::len. But xdr_stream::nwords is not
initialized by xdr_init_encode().
It works today only because all fields in rpcrdma_req::rl_stream
are initialized to zero by rpcrdma_req_create, making the
subtraction in xdr_stream_pos always a no-op.
I found this issue via code inspection. It was introduced by commit
39f4cd9e9982 ("xprtrdma: Harden chunk list encoding against send
buffer overflow"), but the code has changed enough since then that
this fix can't be automatically applied to stable.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Dave Wysochanski [Wed, 26 Jun 2019 20:30:24 +0000 (16:30 -0400)]
SUNRPC: Fix possible autodisconnect during connect due to old last_used
Ensure last_used is updated before calling mod_timer inside
xprt_schedule_autodisconnect. This avoids a possible xprt_autoclose
firing immediately after a successful connect when xprt_unlock_connect
calls xprt_schedule_autodisconnect with an old value of last_used.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Anna Schumaker [Wed, 19 Jun 2019 21:24:10 +0000 (17:24 -0400)]
SUNRPC: Drop redundant CONFIG_ from CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES
The "CONFIG_" portion is added automatically, so this was being expanded
into "CONFIG_CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES"
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Benjamin Coddington [Tue, 11 Jun 2019 16:57:52 +0000 (12:57 -0400)]
NFS: Cleanup if nfs_match_client is interrupted
Don't bail out before cleaning up a new allocation if the wait for
searching for a matching nfs client is interrupted. Memory leaks.
Reported-by: syzbot+7fe11b49c1cc30e3fce2@syzkaller.appspotmail.com
Fixes:
950a578c6128 ("NFS: make nfs_match_client killable")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Darrick J. Wong [Fri, 31 May 2019 21:06:05 +0000 (14:06 -0700)]
nfs: disable client side deduplication
The NFS protocol doesn't support deduplication, so turn it off again.
Fixes:
ce96e888fe48e ("Fix nfs4.2 return -EINVAL when do dedupe operation")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Dave Wysochanski [Fri, 17 May 2019 21:06:41 +0000 (17:06 -0400)]
NFSv4: Add lease_time and lease_expired to 'nfs4:' line of mountstats
On the NFS client there is no low-impact way to determine the nfs4
lease time or whether the lease is expired, so add these to mountstats
with times displayed in seconds.
If the lease is not expired, display lease_expired=0. Otherwise,
display lease_expired=seconds_since_expired, similar to 'age:' line
in mountstats.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Tue, 11 Jun 2019 20:49:52 +0000 (16:49 -0400)]
NFS: Clean up writeback code
Now that the VM promises never to recurse back into the filesystem
layer on writeback, remove all the GFP_NOFS references etc from
the generic writeback code.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Tue, 11 Jun 2019 20:53:33 +0000 (16:53 -0400)]
Merge branch 'multipath_tcp'
Trond Myklebust [Fri, 28 Jun 2019 15:10:39 +0000 (11:10 -0400)]
Merge branch 'containers'
Trond Myklebust [Tue, 11 Jun 2019 18:29:47 +0000 (14:29 -0400)]
Merge branch 'cache_consistency'
Trond Myklebust [Thu, 30 May 2019 15:24:26 +0000 (11:24 -0400)]
SUNRPC: Remove warning in debugfs.c when compiling with W=1
Remove the following warning:
net/sunrpc/debugfs.c:13: warning: cannot understand function prototype: 'struct dentry *topdir;
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Tue, 11 Jun 2019 18:19:07 +0000 (14:19 -0400)]
Merge branch 'bh-remove'
NeilBrown [Thu, 30 May 2019 00:41:28 +0000 (10:41 +1000)]
SUNRPC: add links for all client xprts to debugfs
Now that a client can have multiple xprts, we need to add
them all to debugs.
The first one is still "xprt"
Subsequent xprts are "xprt1", "xprt2", etc.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Dave Wysochanski [Thu, 23 May 2019 20:13:50 +0000 (16:13 -0400)]
SUNRPC: Count ops completing with tk_status < 0
We often see various error conditions with NFS4.x that show up with
a very high operation count all completing with tk_status < 0 in a
short period of time. Add a count to rpc_iostats to record on a
per-op basis the ops that complete in this manner, which will
enable lower overhead diagnostics.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
NeilBrown [Thu, 30 May 2019 00:41:28 +0000 (10:41 +1000)]
SUNRPC: enhance rpc_clnt_show_stats() to report on all xprts.
Now that a client can have multiple xprts, we need to
report the statistics for all of them.
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Dave Wysochanski [Thu, 23 May 2019 20:13:49 +0000 (16:13 -0400)]
SUNRPC: Use proper printk specifiers for unsigned long long
Update the printk specifiers inside _print_rpc_iostats to avoid
a checkpatch warning.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Dave Wysochanski [Thu, 23 May 2019 20:13:48 +0000 (16:13 -0400)]
SUNRPC: Move call to rpc_count_iostats before rpc_call_done
For diagnostic purposes, it would be useful to have an rpc_iostats
metric of RPCs completing with tk_status < 0. Unfortunately,
tk_status is reset inside the rpc_call_done functions for each
operation, and the call to tally the per-op metrics comes after
rpc_call_done. Refactor the call to rpc_count_iostat earlier in
rpc_exit_task so we can count these RPCs completing in error.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
NeilBrown [Thu, 30 May 2019 00:41:28 +0000 (10:41 +1000)]
NFS: send state management on a single connection.
With NFSv4.1, different network connections need to be explicitly
bound to a session. During session startup, this is not possible
so only a single connection must be used for session startup.
So add a task flag to disable the default round-robin choice of
connections (when nconnect > 1) and force the use of a single
connection.
Then use that flag on all requests for session management - for
consistence, include NFSv4.0 management (SETCLIENTID) and session
destruction
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Mon, 17 Sep 2018 17:32:02 +0000 (13:32 -0400)]
NFS: Allow multiple connections to a NFSv2 or NFSv3 server
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Thu, 27 Apr 2017 15:40:04 +0000 (11:40 -0400)]
NFS: Display the "nconnect" mount option if it is set.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Trond Myklebust [Thu, 27 Apr 2017 15:22:07 +0000 (11:22 -0400)]
pNFS: Allow multiple connections to the DS
If the user specifies -onconnect=<number> mount option, and the transport
protocol is TCP, then set up <number> connections to the pNFS data server
as well. The connections will all go to the same IP address.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Trond Myklebust [Thu, 27 Apr 2017 15:13:40 +0000 (11:13 -0400)]
NFSv4: Allow multiple connections to NFSv4.x (x>0) servers
If the user specifies the -onconn=<number> mount option, and the transport
protocol is TCP, then set up <number> connections to the server. The
connections will all go to the same IP address.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Trond Myklebust [Thu, 27 Apr 2017 03:30:48 +0000 (23:30 -0400)]
NFS: Add a mount option to specify number of TCP connections to use
Allow the user to specify that the client should use multiple connections
to the server. For the moment, this functionality will be limited to
TCP and to NFSv4.x (x>0).
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Trond Myklebust [Thu, 27 Apr 2017 12:50:51 +0000 (08:50 -0400)]
SUNRPC: Allow creation of RPC clients with multiple connections
Add an argument to struct rpc_create_args that allows the specification
of how many transport connections you want to set up to the server.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Trond Myklebust [Wed, 30 Jan 2019 02:40:10 +0000 (21:40 -0500)]
NFS: Add sysfs support for per-container identifier
In order to identify containers to the NFS client, we add a per-net
sysfs attribute that udev can fill with the appropriate identifier.
The identifier could be a unique hostname, but in most cases it
will probably be a persisted uuid.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Wed, 22 May 2019 12:38:57 +0000 (08:38 -0400)]
NFS: Add deferred cache invalidation for close-to-open consistency violations
If the client detects that close-to-open cache consistency has been
violated, and that the file or directory has been changed on the
server, then do a cache invalidation when we're done working with
the file.
The reason we don't do an immediate cache invalidation is that we
want to avoid performance problems due to false positives. Also,
note that we cannot guarantee cache consistency in this situation
even if we do invalidate the cache.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Thu, 2 May 2019 15:23:12 +0000 (11:23 -0400)]
SUNRPC: Remove the bh-safe lock requirement on the rpc_wait_queue->lock
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Fri, 28 Apr 2017 14:52:42 +0000 (10:52 -0400)]
SUNRPC: Add basic load balancing to the transport switch
For now, just count the queue length. It is less accurate than counting
number of bytes queued, but easier to implement.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Trond Myklebust [Wed, 6 Feb 2019 14:32:50 +0000 (09:32 -0500)]
NFS: Cleanup - add nfs_clients_exit to mirror nfs_clients_init
Add a helper to clean up the struct nfs_net when it is being destroyed.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Thu, 24 Jan 2019 21:10:46 +0000 (16:10 -0500)]
NFS: Create a root NFS directory in /sys/fs/nfs
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Thu, 2 May 2019 15:21:08 +0000 (11:21 -0400)]
SUNRPC: Remove the bh-safe lock requirement on xprt->transport_lock
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Wed, 1 May 2019 20:28:29 +0000 (16:28 -0400)]
SUNRPC: Replace direct task wakeups from softirq context
Replace the direct task wakeups from inside a softirq context with
wakeups from a process context.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Wed, 1 May 2019 14:49:27 +0000 (10:49 -0400)]
SUNRPC: Replace the queue timer with a delayed work function
The queue timer function, which walks the RPC queue in order to locate
candidates for waking up is one of the current constraints against
removing the bh-safe queue spin locks. Replace it with a delayed
work queue, so that we can do the actual rpc task wake ups from an
ordinary process context.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Thu, 27 Jun 2019 10:41:45 +0000 (06:41 -0400)]
NFSv4: Handle the special Linux file open access mode
According to the open() manpage, Linux reserves the access mode 3
to mean "check for read and write permission on the file and return
a file descriptor that can't be used for reading or writing."
Currently, the NFSv4 code will ask the server to open the file,
and will use an incorrect share access mode of 0. Since it has
an incorrect share access mode, the client later forgets to send
a corresponding close, meaning it can leak stateids on the server.
Fixes:
ce4ef7c0a8a05 ("NFS: Split out NFS v4 file operations")
Cc: stable@vger.kernel.org # 3.6+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Thu, 27 Jun 2019 10:30:48 +0000 (06:30 -0400)]
NFSv4: Handle open for execute correctly
When mapping the NFSv4 context to an open mode and access mode,
we need to treat the FMODE_EXEC flag differently. For the open
mode, FMODE_EXEC means we need read share access. For the access
mode checking, we need to verify that the user actually has
execute access.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Linus Torvalds [Sat, 6 Jul 2019 17:32:12 +0000 (10:32 -0700)]
Merge tag 'mips_fixes_5.2_2' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A few more MIPS fixes:
- Fix a silly typo in virt_addr_valid which led to completely bogus
behavior (that happened to stop tripping up hardened usercopy
despite being broken).
- Fix UART parity setup on AR933x systems.
- A build fix for non-Linux build machines.
- Have the 'all' make target build DTBs, primarily to fit in with the
behavior of scripts/package/builddeb.
- Handle an execution hazard in TLB exceptions that use KScratch
registers, which could inadvertently clobber the $1 register on
some generally higher-end out-of-order CPUs.
- A MAINTAINERS update to fix the path to the NAND driver for Ingenic
systems"
* tag 'mips_fixes_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MAINTAINERS: Correct path to moved files
MIPS: Add missing EHB in mtc0 -> mfc0 sequence.
MIPS: have "plain" make calls build dtbs for selected platforms
MIPS: fix build on non-linux hosts
MIPS: ath79: fix ar933x uart parity mode
MIPS: Fix bounds check virt_addr_valid
Linus Torvalds [Sat, 6 Jul 2019 17:06:37 +0000 (10:06 -0700)]
Merge tag 'dmaengine-fix-5.2' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
- bam_dma fix for completed descriptor count
- fix for imx-sdma remove BD_INTR for channel0 and use-after-free on
probe error path
- endian bug fix in jz4780 IRQ handler
* tag 'dmaengine-fix-5.2' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: qcom: bam_dma: Fix completed descriptors count
dmaengine: imx-sdma: remove BD_INTR for channel0
dmaengine: imx-sdma: fix use-after-free on probe error path
dmaengine: jz4780: Fix an endian bug in IRQ handler
Linus Torvalds [Sat, 6 Jul 2019 16:56:20 +0000 (09:56 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two iscsi fixes.
One for an oops in the client which can be triggered by the server
authentication protocol and the other in the target code which causes
data corruption"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: set auth_protocol back to NULL if CHAP_A value is not supported
scsi: target/iblock: Fix overrun in WRITE SAME emulation
Linus Torvalds [Sat, 6 Jul 2019 16:53:08 +0000 (09:53 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/viro/vfs
Pull vfs fixlet from Al Viro:
"Fix bogus default y in Kconfig (VALIDATE_FS_PARSER)
That thing should not be turned on by default, especially since it's
not quiet in case it finds no problems. Geert has sent the obvious fix
quite a few times, but it fell through the cracks"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: VALIDATE_FS_PARSER should default to n
Linus Torvalds [Sat, 6 Jul 2019 02:55:18 +0000 (19:55 -0700)]
Revert "mm: page cache: store only head pages in i_pages"
This reverts commit
5fd4ca2d84b249f0858ce28cf637cf25b61a398f.
Mikhail Gavrilov reports that it causes the VM_BUG_ON_PAGE() in
__delete_from_swap_cache() to trigger:
page:
ffffd6d34dff0000 refcount:1 mapcount:1 mapping:
ffff97812323a689 index:0xfecec363
anon
flags: 0x17fffe00080034(uptodate|lru|active|swapbacked)
raw:
0017fffe00080034 ffffd6d34c67c508 ffffd6d3504b8d48 ffff97812323a689
raw:
00000000fecec363 0000000000000000 0000000100000000 ffff978433ace000
page dumped because: VM_BUG_ON_PAGE(entry != page)
page->mem_cgroup:
ffff978433ace000
------------[ cut here ]------------
kernel BUG at mm/swap_state.c:170!
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 PID: 221 Comm: kswapd0 Not tainted 5.2.0-0.rc2.git0.1.fc31.x86_64 #1
Hardware name: System manufacturer System Product Name/ROG STRIX X470-I GAMING, BIOS 2202 04/11/2019
RIP: 0010:__delete_from_swap_cache+0x20d/0x240
Code: 30 65 48 33 04 25 28 00 00 00 75 4a 48 83 c4 38 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 c7 c6 2f dc 0f 8a 48 89 c7 e8 93 1b fd ff <0f> 0b 48 c7 c6 a8 74 0f 8a e8 85 1b fd ff 0f 0b 48 c7 c6 a8 7d 0f
RSP: 0018:
ffffa982036e7980 EFLAGS:
00010046
RAX:
0000000000000021 RBX:
0000000000000040 RCX:
0000000000000006
RDX:
0000000000000000 RSI:
0000000000000086 RDI:
ffff97843d657900
RBP:
0000000000000001 R08:
ffffa982036e7835 R09:
0000000000000535
R10:
ffff97845e21a46c R11:
ffffa982036e7835 R12:
ffff978426387120
R13:
0000000000000000 R14:
ffffd6d34dff0040 R15:
ffffd6d34dff0000
FS:
0000000000000000(0000) GS:
ffff97843d640000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00002cba88ef5000 CR3:
000000078a97c000 CR4:
00000000003406e0
Call Trace:
delete_from_swap_cache+0x46/0xa0
try_to_free_swap+0xbc/0x110
swap_writepage+0x13/0x70
pageout.isra.0+0x13c/0x350
shrink_page_list+0xc14/0xdf0
shrink_inactive_list+0x1e5/0x3c0
shrink_node_memcg+0x202/0x760
shrink_node+0xe0/0x470
balance_pgdat+0x2d1/0x510
kswapd+0x220/0x420
kthread+0xfb/0x130
ret_from_fork+0x22/0x40
and it's not immediately obvious why it happens. It's too late in the
rc cycle to do anything but revert for now.
Link: https://lore.kernel.org/lkml/CABXGCsN9mYmBD-4GaaeW_NrDu+FDXLzr_6x+XNxfmFV6QkYCDg@mail.gmail.com/
Reported-and-bisected-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Suggested-by: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 6 Jul 2019 02:13:24 +0000 (19:13 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86 bugfix patches and one compilation fix for ARM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64/sve: Fix vq_present() macro to yield a bool
KVM: LAPIC: Fix pending interrupt in IRR blocked by software disable LAPIC
KVM: nVMX: Change KVM_STATE_NESTED_EVMCS to signal vmcs12 is copied from eVMCS
KVM: nVMX: Allow restore nested-state to enable eVMCS when vCPU in SMM
KVM: x86: degrade WARN to pr_warn_ratelimited
Linus Torvalds [Sat, 6 Jul 2019 02:07:57 +0000 (19:07 -0700)]
Merge tag 'mtd/fixes-for-5.2-final' of git://git./linux/kernel/git/mtd/linux
Pull mtf fixes from Miquel Raynal:
- Fix the memory organization structure of a Macronix SPI-NAND chip.
- Fix a build dependency wrongly described.
- Fix the sunxi NAND driver for A23/A33 SoCs by (a) reverting the
faulty commit introducing broken DMA support and (b) applying another
commit bringing working DMA support.
* tag 'mtd/fixes-for-5.2-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: sunxi: Add A23/A33 DMA support with extra MBUS configuration
Revert "mtd: rawnand: sunxi: Add A23/A33 DMA support"
mtd: rawnand: ingenic: Fix ingenic_ecc dependency
mtd: spinand: Fix max_bad_eraseblocks_per_lun info in memorg
Linus Torvalds [Sat, 6 Jul 2019 02:04:57 +0000 (19:04 -0700)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixlet from Wolfram Sang:
"I2C has a MAINTAINERS update which will be benfitial for developers,
so let's add it right away"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: tegra: Add Dmitry as a reviewer
Linus Torvalds [Sat, 6 Jul 2019 02:00:37 +0000 (19:00 -0700)]
Merge tag 'nfsd-5.2-2' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Two more quick bugfixes for nfsd: fixing a regression causing mount
failures on high-memory machines and fixing the DRC over RDMA"
* tag 'nfsd-5.2-2' of git://linux-nfs.org/~bfields/linux:
nfsd: Fix overflow causing non-working mounts on 1 TB machines
svcrdma: Ignore source port when computing DRC hash
Miquel Raynal [Mon, 8 Apr 2019 07:41:46 +0000 (09:41 +0200)]
mtd: rawnand: sunxi: Add A23/A33 DMA support with extra MBUS configuration
Allwinner NAND controllers can make use of DMA to enhance the I/O
throughput thanks to ECC pipelining. DMA handling with A23/A33 NAND IP
is a bit different than with the older SoCs, hence the introduction of
a new compatible to handle:
* the differences between register offsets,
* the burst length change from 4 to minimum 8,
* manage SRAM accesses through MBUS with extra configuration.
Fixes:
c49836f05aa1 ("mtd: rawnand: sunxi: Add A23/A33 DMA support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Miquel Raynal [Fri, 5 Jul 2019 09:25:29 +0000 (11:25 +0200)]
Revert "mtd: rawnand: sunxi: Add A23/A33 DMA support"
This reverts commit
c49836f05aa15282f7280e06ede3f6f8a6324833.
The commit is wrong and its approach actually does not work. Let's
revert it in order to add the feature with a clean patch.
Fixes:
c49836f05aa1 ("mtd: rawnand: sunxi: Add A23/A33 DMA support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Dmitry Osipenko [Sun, 23 Jun 2019 17:46:55 +0000 (20:46 +0300)]
i2c: tegra: Add Dmitry as a reviewer
I'm contributing to Tegra's upstream development in general and happened
to review the Tegra's I2C patches for awhile because I'm actively using
upstream kernel on all of my Tegra-powered devices and initially some of
the submitted patches were getting my attention since they were causing
problems. Recently Wolfram Sang asked whether I'm interested in becoming
a reviewer for the driver and I don't mind at all.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[wsa: ack was expressed by Thierry Reding in a mail thread]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Geert Uytterhoeven [Mon, 1 Apr 2019 11:53:57 +0000 (13:53 +0200)]
fs: VALIDATE_FS_PARSER should default to n
CONFIG_VALIDATE_FS_PARSER is a debugging tool to check that the parser
tables are vaguely sane. It was set to default to 'Y' for the moment to
catch errors in upcoming fs conversion development.
Make sure it is not enabled by default in the final release of v5.1.
Fixes:
31d921c7fb969172 ("vfs: Add configuration parser helpers")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Zhang Lei [Wed, 3 Jul 2019 17:42:50 +0000 (18:42 +0100)]
KVM: arm64/sve: Fix vq_present() macro to yield a bool
The original implementation of vq_present() relied on aggressive
inlining in order for the compiler to know that the code is
correct, due to some const-casting issues. This was causing sparse
and clang to complain, while GCC compiled cleanly.
Commit
0c529ff789bc addressed this problem, but since vq_present()
is no longer a function, there is now no implicit casting of the
returned value to the return type (bool).
In set_sve_vls(), this uncast bit value is compared against a bool,
and so may spuriously compare as unequal when both are nonzero. As
a result, KVM may reject valid SVE vector length configurations as
invalid, and vice versa.
Fix it by forcing the returned value to a bool.
Signed-off-by: Zhang Lei <zhang.lei@jp.fujitsu.com>
Fixes:
0c529ff789bc ("KVM: arm64: Implement vq_present() as a macro")
Signed-off-by: Dave Martin <Dave.Martin@arm.com> [commit message rewrite]
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sricharan R [Fri, 28 Jun 2019 12:09:46 +0000 (17:39 +0530)]
dmaengine: qcom: bam_dma: Fix completed descriptors count
One space is left unused in circular FIFO to differentiate
'full' and 'empty' cases. So take that in to account while
counting for the descriptors completed.
Fixes the issue reported here,
https://lkml.org/lkml/2019/6/18/669
Cc: stable@vger.kernel.org
Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Robin Gong [Fri, 21 Jun 2019 08:23:06 +0000 (16:23 +0800)]
dmaengine: imx-sdma: remove BD_INTR for channel0
It is possible for an irq triggered by channel0 to be received later
after clks are disabled once firmware loaded during sdma probe. If
that happens then clearing them by writing to SDMA_H_INTR won't work
and the kernel will hang processing infinite interrupts. Actually,
don't need interrupt triggered on channel0 since it's pollling
SDMA_H_STATSTOP to know channel0 done rather than interrupt in
current code, just clear BD_INTR to disable channel0 interrupt to
avoid the above case.
This issue was brought by commit
1d069bfa3c78 ("dmaengine: imx-sdma:
ack channel 0 IRQ in the interrupt handler") which didn't take care
the above case.
Fixes:
1d069bfa3c78 ("dmaengine: imx-sdma: ack channel 0 IRQ in the interrupt handler")
Cc: stable@vger.kernel.org #5.0+
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reported-by: Sven Van Asbroeck <thesven73@gmail.com>
Tested-by: Sven Van Asbroeck <thesven73@gmail.com>
Reviewed-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Sven Van Asbroeck [Mon, 24 Jun 2019 14:07:31 +0000 (10:07 -0400)]
dmaengine: imx-sdma: fix use-after-free on probe error path
If probe() fails anywhere beyond the point where
sdma_get_firmware() is called, then a kernel oops may occur.
Problematic sequence of events:
1. probe() calls sdma_get_firmware(), which schedules the
firmware callback to run when firmware becomes available,
using the sdma instance structure as the context
2. probe() encounters an error, which deallocates the
sdma instance structure
3. firmware becomes available, firmware callback is
called with deallocated sdma instance structure
4. use after free - kernel oops !
Solution: only attempt to load firmware when we're certain
that probe() will succeed. This guarantees that the firmware
callback's context will remain valid.
Note that the remove() path is unaffected by this issue: the
firmware loader will increment the driver module's use count,
ensuring that the module cannot be unloaded while the
firmware callback is pending or running.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
[vkoul: fixed braces for if condition]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Dan Carpenter [Mon, 24 Jun 2019 13:49:40 +0000 (16:49 +0300)]
dmaengine: jz4780: Fix an endian bug in IRQ handler
The "pending" variable was a u32 but we cast it to an unsigned long
pointer when we do the for_each_set_bit() loop. The problem is that on
big endian 64bit systems that results in an out of bounds read.
Fixes:
4e4106f5e942 ("dmaengine: jz4780: Fix transfers being ACKed too soon")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Linus Torvalds [Fri, 5 Jul 2019 05:10:30 +0000 (14:10 +0900)]
Merge tag 'drm-fixes-2019-07-05-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"I skipped last week because there wasn't much worth doing, this week
got a few more fixes in.
amdgpu:
- default register value change
- runpm regression fix
- fan control fix
i915:
- fix Ironlake regression
panfrost:
- fix a double free
virtio:
- fix a locking bug
imx:
- crtc disable fixes"
* tag 'drm-fixes-2019-07-05-1' of git://anongit.freedesktop.org/drm/drm:
drm/imx: only send event on crtc disable if kept disabled
drm/imx: notify drm core before sending event during crtc disable
drm/i915/ringbuffer: EMIT_INVALIDATE *before* switch context
drm/amdgpu/gfx9: use reset default for PA_SC_FIFO_SIZE
drm/amdgpu: Don't skip display settings in hwmgr_resume()
drm/amd/powerplay: use hardware fan control if no powerplay fan table
drm/panfrost: Fix a double-free error
drm/etnaviv: add missing failure path to destroy suballoc
drm/virtio: move drm_connector_update_edid_property() call
Dave Airlie [Fri, 5 Jul 2019 02:54:48 +0000 (12:54 +1000)]
Merge tag 'imx-drm-fixes-2019-07-04' of git://git.pengutronix.de/git/pza/linux into drm-fixes
drm/imx: fix stale vblank timestamp after a modeset
This series fixes stale vblank timestamps in the first event sent after
a crtc was disabled. The core now is notified via drm_crtc_vblank_off
before sending the last pending event in atomic_disable. If the crtc is
reenabled right away during to a modeset, the event is not sent at all,
as the next vblank will take care of it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1562237119.6641.16.camel@pengutronix.de
Linus Torvalds [Fri, 5 Jul 2019 04:31:19 +0000 (13:31 +0900)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes two memory leaks and a list corruption bug"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: user - prevent operating on larval algorithms
crypto: cryptd - Fix skcipher instance memory leak
lib/mpi: Fix karactx leak in mpi_powm
Linus Torvalds [Fri, 5 Jul 2019 02:39:56 +0000 (11:39 +0900)]
Merge branch 'akpm' (patches from Andrew)
Merge more fixes from Andrew Morton:
"5 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
swap_readpage(): avoid blk_wake_io_task() if !synchronous
devres: allow const resource arguments
mm/vmscan.c: prevent useless kswapd loops
fs/userfaultfd.c: disable irqs for fault_pending and event locks
mm/page_alloc.c: fix regression with deferred struct page init
Linus Torvalds [Fri, 5 Jul 2019 02:35:45 +0000 (11:35 +0900)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"Likely our final small batch of fixes for 5.2:
- Some fixes for USB on davinci, regressions were due to the recent
conversion of the OCHI driver to use GPIO regulators
- A fixup of kconfig dependencies for a TI irq controller
- A switch of armada-38x to avoid dropped characters on uart, caused
by switch of base inherited platform description earlier this year"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: davinci: da830-evm: fix GPIO lookup for OHCI
ARM: davinci: omapl138-hawk: add missing regulator constraints for OHCI
ARM: davinci: da830-evm: add missing regulator constraints for OHCI
soc: ti: fix irq-ti-sci link error
ARM: dts: armada-xp-98dx3236: Switch to armada-38x-uart serial node
Linus Torvalds [Fri, 5 Jul 2019 02:32:11 +0000 (11:32 +0900)]
Merge tag 'dax-fix-5.2-rc8' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull dax fix from Dan Williams:
"A single dax fix that has been soaking awaiting other fixes under
discussion to join it. As it is getting late in the cycle lets proceed
with this fix and save follow-on changes for post-v5.3-rc1.
- Fix xarray entry association for mixed mappings"
* tag 'dax-fix-5.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Fix xarray entry association for mixed mappings
Linus Torvalds [Fri, 5 Jul 2019 02:21:36 +0000 (11:21 +0900)]
Merge branch 'fixes' of git://git./linux/kernel/git/viro/vfs
Pull do_move_mount() fix from Al Viro:
"Regression fix"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: move_mount: reject moving kernel internal mounts
Oleg Nesterov [Thu, 4 Jul 2019 22:14:49 +0000 (15:14 -0700)]
swap_readpage(): avoid blk_wake_io_task() if !synchronous
swap_readpage() sets waiter = bio->bi_private even if synchronous = F,
this means that the caller can get the spurious wakeup after return.
This can be fatal if blk_wake_io_task() does
set_current_state(TASK_RUNNING) after the caller does
set_special_state(), in the worst case the kernel can crash in
do_task_dead().
Link: http://lkml.kernel.org/r/20190704160301.GA5956@redhat.com
Fixes:
0619317ff8baa2d ("block: add polled wakeup task helper")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Qian Cai <cai@lca.pw>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Thu, 4 Jul 2019 22:14:45 +0000 (15:14 -0700)]
devres: allow const resource arguments
devm_ioremap_resource() does not currently take 'const' arguments, which
results in a warning from the first driver trying to do it anyway:
drivers/gpio/gpio-amd-fch.c: In function 'amd_fch_gpio_probe':
drivers/gpio/gpio-amd-fch.c:171:49: error: passing argument 2 of 'devm_ioremap_resource' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
priv->base = devm_ioremap_resource(&pdev->dev, &amd_fch_gpio_iores);
^~~~~~~~~~~~~~~~~~~
Change the prototype to allow it, as there is no real reason not to.
Link: http://lkml.kernel.org/r/20190628150049.1108048-1-arnd@arndb.de
Fixes:
9bb2e0452508 ("gpio: amd: Make resource struct const")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shakeel Butt [Thu, 4 Jul 2019 22:14:42 +0000 (15:14 -0700)]
mm/vmscan.c: prevent useless kswapd loops
In production we have noticed hard lockups on large machines running
large jobs due to kswaps hoarding lru lock within isolate_lru_pages when
sc->reclaim_idx is 0 which is a small zone. The lru was couple hundred
GiBs and the condition (page_zonenum(page) > sc->reclaim_idx) in
isolate_lru_pages() was basically skipping GiBs of pages while holding
the LRU spinlock with interrupt disabled.
On further inspection, it seems like there are two issues:
(1) If kswapd on the return from balance_pgdat() could not sleep (i.e.
node is still unbalanced), the classzone_idx is unintentionally set
to 0 and the whole reclaim cycle of kswapd will try to reclaim only
the lowest and smallest zone while traversing the whole memory.
(2) Fundamentally isolate_lru_pages() is really bad when the
allocation has woken kswapd for a smaller zone on a very large machine
running very large jobs. It can hoard the LRU spinlock while skipping
over 100s of GiBs of pages.
This patch only fixes (1). (2) needs a more fundamental solution. To
fix (1), in the kswapd context, if pgdat->kswapd_classzone_idx is
invalid use the classzone_idx of the previous kswapd loop otherwise use
the one the waker has requested.
Link: http://lkml.kernel.org/r/20190701201847.251028-1-shakeelb@google.com
Fixes:
e716f2eb24de ("mm, vmscan: prevent kswapd sleeping prematurely due to mismatched classzone_idx")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Thu, 4 Jul 2019 22:14:39 +0000 (15:14 -0700)]
fs/userfaultfd.c: disable irqs for fault_pending and event locks
When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs
and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock.
This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by
userfaultfd_ctx_read(), which in turn can be waiting for
userfaultfd_ctx::fault_pending_wqh.lock or
userfaultfd_ctx::event_wqh.lock.
But elsewhere the fault_pending_wqh and event_wqh locks are taken with
IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep
reports that a deadlock is possible.
Fix it by always disabling IRQs when taking the fault_pending_wqh and
event_wqh locks.
Commit
ae62c16e105a ("userfaultfd: disable irqs when taking the
waitqueue lock") didn't fix this because it only accounted for the
fd_wqh lock, not the other locks nested inside it.
Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org
Fixes:
bfe4037e722e ("aio: implement IOCB_CMD_POLL")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com
Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com
Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Juergen Gross [Thu, 4 Jul 2019 22:14:36 +0000 (15:14 -0700)]
mm/page_alloc.c: fix regression with deferred struct page init
Commit
0e56acae4b4d ("mm: initialize MAX_ORDER_NR_PAGES at a time
instead of doing larger sections") is causing a regression on some
systems when the kernel is booted as Xen dom0.
The system will just hang in early boot.
Reason is an endless loop in get_page_from_freelist() in case the first
zone looked at has no free memory. deferred_grow_zone() is always
returning true due to the following code snipplet:
/* If the zone is empty somebody else may have cleared out the zone */
if (!deferred_init_mem_pfn_range_in_zone(&i, zone, &spfn, &epfn,
first_deferred_pfn)) {
pgdat->first_deferred_pfn = ULONG_MAX;
pgdat_resize_unlock(pgdat, &flags);
return true;
}
This in turn results in the loop as get_page_from_freelist() is assuming
forward progress can be made by doing some more struct page
initialization.
Link: http://lkml.kernel.org/r/20190620160821.4210-1-jgross@suse.com
Fixes:
0e56acae4b4d ("mm: initialize MAX_ORDER_NR_PAGES at a time instead of doing larger sections")
Signed-off-by: Juergen Gross <jgross@suse.com>
Suggested-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Acked-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 4 Jul 2019 17:03:50 +0000 (02:03 +0900)]
Merge tag 'sound-5.2' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are a collection of small fixes for:
- A race with ASoC HD-audio registration
- LINE6 usb-audio memory overwrite by malformed descriptor
- FireWire MIDI handling
- Missing cast for bit shifts in a few USB-audio quirks
- The wrong function calls in minor OSS sequencer code paths
- A couple of HD-audio quirks"
* tag 'sound-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: line6: Fix write on zero-sized buffer
ALSA: hda: Fix widget_mutex incomplete protection
ALSA: firewire-lib/fireworks: fix miss detection of received MIDI messages
ALSA: seq: fix incorrect order of dest_client/dest_ports arguments
ALSA: hda/realtek - Change front mic location for Lenovo M710q
ALSA: usb-audio: fix sign unintended sign extension on left shifts
ALSA: hda/realtek: Add quirks for several Clevo notebook barebones
Jann Horn [Thu, 4 Jul 2019 15:32:23 +0000 (17:32 +0200)]
ptrace: Fix ->ptracer_cred handling for PTRACE_TRACEME
Fix two issues:
When called for PTRACE_TRACEME, ptrace_link() would obtain an RCU
reference to the parent's objective credentials, then give that pointer
to get_cred(). However, the object lifetime rules for things like
struct cred do not permit unconditionally turning an RCU reference into
a stable reference.
PTRACE_TRACEME records the parent's credentials as if the parent was
acting as the subject, but that's not the case. If a malicious
unprivileged child uses PTRACE_TRACEME and the parent is privileged, and
at a later point, the parent process becomes attacker-controlled
(because it drops privileges and calls execve()), the attacker ends up
with control over two processes with a privileged ptrace relationship,
which can be abused to ptrace a suid binary and obtain root privileges.
Fix both of these by always recording the credentials of the process
that is requesting the creation of the ptrace relationship:
current_cred() can't change under us, and current is the proper subject
for access control.
This change is theoretically userspace-visible, but I am not aware of
any code that it will actually break.
Fixes:
64b875f7ac8a ("ptrace: Capture the ptracer's creds not PT_PTRACE_CAP")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Robert Beckett [Tue, 25 Jun 2019 17:59:15 +0000 (18:59 +0100)]
drm/imx: only send event on crtc disable if kept disabled
The event will be sent as part of the vblank enable during the modeset
if the crtc is not being kept disabled.
Fixes:
5f2f911578fb ("drm/imx: atomic phase 3 step 1: Use atomic configuration")
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Robert Beckett [Tue, 25 Jun 2019 17:59:13 +0000 (18:59 +0100)]
drm/imx: notify drm core before sending event during crtc disable
Notify drm core before sending pending events during crtc disable.
This fixes the first event after disable having an old stale timestamp
by having drm_crtc_vblank_off update the timestamp to now.
This was seen while debugging weston log message:
Warning: computed repaint delay is insane: -8212 msec
This occurred due to:
1. driver starts up
2. fbcon comes along and restores fbdev, enabling vblank
3. vblank_disable_fn fires via timer disabling vblank, keeping vblank
seq number and time set at current value
(some time later)
4. weston starts and does a modeset
5. atomic commit disables crtc while it does the modeset
6. ipu_crtc_atomic_disable sends vblank with old seq number and time
Fixes:
a474478642d5 ("drm/imx: fix crtc vblank state regression")
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Linus Torvalds [Thu, 4 Jul 2019 01:26:17 +0000 (10:26 +0900)]
Merge tag 'trace-v5.2-rc5' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This includes three fixes:
- Fix a deadlock from a previous fix to keep module loading and
function tracing text modifications from stepping on each other
(this has a few patches to help document the issue in comments)
- Fix a crash when the snapshot buffer gets out of sync with the main
ring buffer
- Fix a memory leak when reading the memory logs"
* tag 'trace-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace/x86: Anotate text_mutex split between ftrace_arch_code_modify_post_process() and ftrace_arch_code_modify_prepare()
tracing/snapshot: Resize spare buffer if size changed
tracing: Fix memory leak in tracing_err_log_open()
ftrace/x86: Add a comment to why we take text_mutex in ftrace_arch_code_modify_prepare()
ftrace/x86: Remove possible deadlock between register_kprobe() and ftrace_run_update_code()