OSDN Git Service
Russell King [Wed, 29 Nov 2006 21:18:04 +0000 (21:18 +0000)]
PCI: use /sys/bus/pci/drivers/<driver>/new_id first
Unfortunately, the .../new_id feature does not work with the 8250_pci
driver.
The reason for this comes down to the way .../new_id is implemented.
When PCI tries to match a driver to a device, it checks the modules
static device ID tables _before_ checking the dynamic new_id tables.
When a driver is capable of matching by ID, and falls back to matching
by class (as 8250_pci does), this makes it absolutely impossible to
specify a board by ID, and as such the correct driver_data value to
use with it.
Let's say you have a serial board with vendor 0x1234 and device 0x5678.
It's class is set to PCI_CLASS_COMMUNICATION_SERIAL.
On boot, this card is matched to the 8250_pci driver, which tries to
probe it because it matched using the class entry. The driver finds
that it is unable to automatically detect the correct settings to use,
so it returns -ENODEV.
You know that the information the driver needs is to match this card
using a device_data value of '7'. So you echo 1234 5678 0 0 0 0 7
into new_id.
The kernel attempts to re-bind 8250_pci to this device. However,
because it scans the PCI driver tables, it _again_ matches the class
entry which has the wrong device_data. It fails.
End of story. You can't support the card without rebuilding the
kernel (or writing a specific PCI probe module to support it.)
So, can we make new_id override the driver-internal PCI ID tables?
IOW, like this:
From: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Tue, 19 Dec 2006 18:32:40 +0000 (10:32 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
[PATCH] Generic HID layer - update MAINTAINERS
input/hid: Supporting more keys from the HUT Consumer Page
[PATCH] Generic HID layer - build: USB_HID should select HID
Evgeniy Polyakov [Mon, 18 Dec 2006 09:53:58 +0000 (01:53 -0800)]
[CONNECTOR]: Replace delayed work with usual work queue.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Yewang [Mon, 18 Dec 2006 08:26:35 +0000 (00:26 -0800)]
[IPV4]: Fix BUG of ip_rt_send_redirect()
Fix the redirect packet of the router if the jiffies wraparound.
Signed-off-by: Li Yewang <lyw@nanjing-fnst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leigh Brown [Mon, 18 Dec 2006 01:13:10 +0000 (17:13 -0800)]
[TCP]: Trivial fix to message in tcp_v4_inbound_md5_hash
The message logged in tcp_v4_inbound_md5_hash when the hash was expected
but not found was reversed.
Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leigh Brown [Mon, 18 Dec 2006 01:12:30 +0000 (17:12 -0800)]
[TCP]: Fix oops caused by tcp_v4_md5_do_del
md5sig_info.alloced4 must be set to zero when freeing keys4, otherwise
it will not be alloc'd again when another key is added to the same
socket by tcp_v4_md5_do_add.
Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Evgeniy Polyakov [Mon, 18 Dec 2006 01:09:41 +0000 (17:09 -0800)]
[CONNECTOR]: Fix compilation breakage introduced recently.
Linus has changed work queue structure and has not tested it with
connector compiled in, his changes break the build.
Attached patch fixes compilation error.
Patch is against commit
99f5e9718185f07458ae70c2282c2153a2256c91.
Thanks to Toralf Förster for pointing this out.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 18 Dec 2006 01:08:30 +0000 (17:08 -0800)]
[TG3]: Update version and reldate.
Update version to 3.71.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 18 Dec 2006 01:08:07 +0000 (17:08 -0800)]
[TG3]: Power down/up 5906 PHY correctly.
The 5906 PHY requires a special register bit to power down and up the
PHY.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 18 Dec 2006 01:07:29 +0000 (17:07 -0800)]
[TG3]: Fix race condition when calling register_netdev().
Hot-plug scripts can call tg3_open() as soon as register_netdev() is
called in tg3_init_one(). We need to call pci_set_drvdata() before
register_netdev(), and netif_carrier_off() needs to be moved to
tg3_open() to avoid race conditions.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 18 Dec 2006 01:06:46 +0000 (17:06 -0800)]
[TG3]: Assign tp->link_config.orig_* values.
tp->link_config.orig_* values must be assigned during
tg3_set_settings() because these values will be used to setup the
link speed during tg3_open(). Without these assignments, the link
speed settings will be all messed by if tg3_set_settings() is called
when the device is down.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 17 Dec 2006 22:37:23 +0000 (14:37 -0800)]
[NETFILTER] IPV6: Fix dependencies.
Although the menu dependencies in net/ipv6/netfilter/Kconfig
guard the entries in that file from the Kconfig GUI, this does
not prevent them from being selected still via "make oldconfig"
when IPV6 etc. is disabled.
So add explicit dependencies.
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Thu, 14 Dec 2006 23:57:04 +0000 (15:57 -0800)]
[BNX2]: Fix minor loopback problem.
Use the configured MAC address instead of the permanent MAC address
for loopback frames.
Update version to 1.5.2.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Thu, 14 Dec 2006 23:56:50 +0000 (15:56 -0800)]
[BNX2]: Fix bug in bnx2_nvram_write().
Length was not calculated correctly if the NVRAM offset is on a non-
aligned offset.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Thu, 14 Dec 2006 23:56:32 +0000 (15:56 -0800)]
[BNX2]: Fix panic in bnx2_tx_int().
There was an off-by-one bug in bnx2_tx_avail(). If the tx ring is
completely full, the producer and consumer indices may be apart by
256 even though the ring size is only 255. One entry in the ring is
unused and must be properly accounted for when calculating the number
of available entries. The bug caused the tx ring entries to be
reused by mistake, overwriting active entries, and ultimately causing
it to crash.
This bug rarely occurs because the tx ring is rarely completely full.
We always stop when there is less than MAX_SKB_FRAGS entries available
in the ring.
Thanks to Corey Kovacs <cjk@techma.com> and Andy Gospodarek
<agospoda@redhat.com> for reporting the problem and helping to collect
debug information.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ralf Baechle [Thu, 14 Dec 2006 23:52:13 +0000 (15:52 -0800)]
[AX.25]: Fix unchecked rose_add_loopback_neigh uses
rose_add_loopback_neigh uses kmalloc and the callers were ignoring the
error value. Rewrite to let the caller deal with the allocation. This
allows the use of static allocation of kmalloc use entirely.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ralf Baechle [Thu, 14 Dec 2006 23:51:44 +0000 (15:51 -0800)]
[AX.25]: Fix unchecked rose_add_loopback_node uses
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ralf Baechle [Thu, 14 Dec 2006 23:51:23 +0000 (15:51 -0800)]
[AX.25]: Fix unchecked ax25_linkfail_register uses
ax25_linkfail_register uses kmalloc and the callers were ignoring the
error value. Rewrite to let the caller deal with the allocation. This
allows the use of static allocation of kmalloc use entirely.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ralf Baechle [Thu, 14 Dec 2006 23:50:58 +0000 (15:50 -0800)]
[AX.25]: Fix unchecked nr_add_node uses.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ralf Baechle [Thu, 14 Dec 2006 23:50:34 +0000 (15:50 -0800)]
[AX.25]: Fix unchecked ax25_listen_register uses
Fix ax25_listen_register to return something that's a sane error code,
then all callers to use it.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ralf Baechle [Thu, 14 Dec 2006 23:50:01 +0000 (15:50 -0800)]
[AX.25]: Fix unchecked ax25_protocol_register uses.
Replace ax25_protocol_register by ax25_register_pid which assumes the
caller has done the memory allocation. This allows replacing the
kmalloc allocations entirely by static allocations.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ralf Baechle [Thu, 14 Dec 2006 23:49:28 +0000 (15:49 -0800)]
[AX.25]: Mark all kmalloc users __must_check
The recent fix
0506d4068bad834aab1141b5dc5e748eb175c6b3 made obvious that
error values were not being propagated through the AX.25 stack. To help
with that this patch marks all kmalloc users in the AX.25, NETROM and
ROSE stacks as __must_check.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yan Burman [Thu, 14 Dec 2006 23:25:00 +0000 (15:25 -0800)]
[TG3]: replace kmalloc+memset with kzalloc
Replace kmalloc+memset with kzalloc
Signed-off-by: Yan Burman <burman.yan@gmail.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 18 Dec 2006 03:08:11 +0000 (19:08 -0800)]
Merge /pub/scm/linux/kernel/git/davej/cpufreq
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ] longhaul compile fix.
[CPUFREQ] Advise not to use longhaul on VIA C7.
[CPUFREQ] set policy->curfreq on initialization
[CPUFREQ] Trivial cleanup for acpi read/write port in acpi-cpufreq.c
[CPUFREQ] fixes typo in cpufreq.c
Al Viro [Fri, 8 Dec 2006 09:16:49 +0000 (09:16 +0000)]
[PATCH] more work_struct fixes: tas300x sound drivers
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David S. Miller [Mon, 18 Dec 2006 00:18:47 +0000 (16:18 -0800)]
[SPARC]: Make bitops use same spinlocks as atomics.
Recent workqueue changes basically make this a formal requirement.
Also, move atomic32.o from lib-y to obj-y since it exports symbols
to modules.
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Jones [Mon, 18 Dec 2006 00:09:59 +0000 (19:09 -0500)]
[CPUFREQ] longhaul compile fix.
Some gcc's are more anal than others about empty switch labels.
error: label at end of compound statement
Signed-off-by: Dave Jones <davej@redhat.com>
Dave Jones [Mon, 18 Dec 2006 00:07:35 +0000 (19:07 -0500)]
[CPUFREQ] Advise not to use longhaul on VIA C7.
C7's are centrino speedstep-alike.
Signed-off-by: Dave Jones <davej@redhat.com>
Mattia Dongili [Fri, 15 Dec 2006 18:52:45 +0000 (19:52 +0100)]
[CPUFREQ] set policy->curfreq on initialization
Check the correct variable and set policy->cur upon acpi-cpufreq
initialization to allow the userspace governor to be used as default.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Acked-by: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>
David S. Miller [Sun, 17 Dec 2006 22:21:34 +0000 (14:21 -0800)]
[SPARC]: Update defconfig.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Dec 2006 07:40:57 +0000 (23:40 -0800)]
[SPARC64]: Mirror x86_64's PERCPU_ENOUGH_ROOM definition.
Signed-off-by: David S. Miller <davem@davemloft.net>
Fabrice Knevez [Thu, 14 Dec 2006 23:20:29 +0000 (15:20 -0800)]
[SUNKBD]: Fix sunkbd_enable(sunkbd, 0); obvious.
"sunkbd_enable(sunkbd, 0);" has no effect. Adding "sunkbd->enabled =
enable" in sunkbd_enable (obvious)
Signed-off-by: Fabrice Knevez <nuxdoors@cegetel.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 12 Dec 2006 09:00:06 +0000 (01:00 -0800)]
[DocBook]: Fix two typos in generic IRQ docs.
desc-status --> desc->status
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 12 Dec 2006 08:59:12 +0000 (00:59 -0800)]
[SPARC64]: Minor irq handling cleanups.
Use struct irq_chip instead of hw_interrupt_type.
Delete hw_resend_irq(), totally unused.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 12 Dec 2006 05:06:55 +0000 (21:06 -0800)]
[SPARC64]: Kill no-remapping-needed code in head.S
It branches around some necessary prom calls, which we would
need to do even if we are mapped at the correct location already.
So it doesn't work.
The idea was that this sort of thing could be used for the eventual
kexec implementation, but it is clear that this will need to be
done differently.
Signed-off-by: David S. Miller <davem@davemloft.net>
Oleg Nesterov [Sun, 17 Dec 2006 15:52:47 +0000 (18:52 +0300)]
[PATCH] sys_mincore: s/max/min/
fix a typo, sys_mincore() needs min().
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus "I'm a moron" Torvalds <torvalds@osdl.org>
Al Viro [Thu, 14 Dec 2006 15:00:15 +0000 (15:00 +0000)]
[PATCH] m68k trivial build fixes
amikbd: missing declaration
sun3_NCR5380: more work_struct mess
sun3_NCR5380: cast is not an lvalue
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sun, 17 Dec 2006 00:01:50 +0000 (16:01 -0800)]
Fix up mm/mincore.c error value cases
Hugh Dickins correctly points out that mincore() is actually _supposed_
to fail on an unmapped hole in the user address space, rather than
return valid ("empty") information about the hole. This just simplifies
the problem further (I had been misled by our previous confusing and
complicated way of doing mincore()).
Also, in the unlikely situation that we can't allocate a temporary
kernel buffer, we should actually return EAGAIN, not ENOMEM, to keep the
"unmapped hole" and "allocation failure" error cases separate.
Finally, add a comment about our stupid historical lack of support for
anonymous mappings. I'll fix that if somebody reminds me after 2.6.20
is out.
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Sat, 16 Dec 2006 21:23:45 +0000 (13:23 -0800)]
Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
IB/mthca: Use DEFINE_MUTEX() instead of mutex_init()
IB/mthca: Add HCA profile module parameters
IB/srp: Fix FMR mapping for 32-bit kernels and addresses above 4G
IB: Fix ib_dma_alloc_coherent() wrapper
Linus Torvalds [Sat, 16 Dec 2006 17:54:23 +0000 (09:54 -0800)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
[PATCH] pata_via: Cable detect error
[PATCH] Fix help text for CONFIG_ATA_PIIX
[PATCH] initializer entry defined twice in pata_rz1000
[PATCH] ata: fix platform_device_register_simple() error check
[PATCH] ahci: do not mangle saved HOST_CAP while resetting controller
[PATCH] libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2)
[libata] sata_svw: Disable ATAPI DMA on current boards (errata workaround)
[libata] use kmap_atomic(KM_IRQ0) in SCSI simulator
[PATCH] ata_piix: use piix_host_stop() in ich_pata_ops
[PATCH] ata_piix: IDE mode SATA patch for Intel ICH9
Linus Torvalds [Sat, 16 Dec 2006 17:53:50 +0000 (09:53 -0800)]
Make workqueue bit operations work on "atomic_long_t"
On architectures where the atomicity of the bit operations is handled by
external means (ie a separate spinlock to protect concurrent accesses),
just doing a direct assignment on the workqueue data field (as done by
commit
4594bf159f1962cec3b727954b7c598b07e2e737) can cause the
assignment to be lost due to lack of serialization with the bitops on
the same word.
So we need to serialize the assignment with the locks on those
architectures (notably older ARM chips, PA-RISC and sparc32).
So rather than using an "unsigned long", let's use "atomic_long_t",
which already has a safe assignment operation (atomic_long_set()) on
such architectures.
This requires that the atomic operations use the same atomicity locks as
the bit operations do, but that is largely the case anyway. Sparc32
will probably need fixing.
Architectures (including modern ARM with LL/SC) that implement sane
atomic operations for SMP won't see any of this matter.
Cc: Russell King <rmk+lkml@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: David Miller <davem@davemloft.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Linux Arch Maintainers <linux-arch@vger.kernel.org>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Sat, 16 Dec 2006 17:44:32 +0000 (09:44 -0800)]
Fix incorrect user space access locking in mincore()
Doug Chapman noticed that mincore() will doa "copy_to_user()" of the
result while holding the mmap semaphore for reading, which is a big
no-no. While a recursive read-lock on a semaphore in the case of a page
fault happens to work, we don't actually allow them due to deadlock
schenarios with writers due to fairness issues.
Doug and Marcel sent in a patch to fix it, but I decided to just rewrite
the mess instead - not just fixing the locking problem, but making the
code smaller and (imho) much easier to understand.
Cc: Doug Chapman <dchapman@redhat.com>
Cc: Marcel Holtmann <holtmann@redhat.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alan [Sat, 16 Dec 2006 14:32:21 +0000 (14:32 +0000)]
[PATCH] pata_via: Cable detect error
The UDMA66 VIA hardware has no controller side cable detect bits we can
use. This patch minimally fixes the problem by reporting unknown in this
case and using drive side detection.
The old drivers/ide code does some additional tricks but those aren't
appropriate now we are in -rc.
Without this update UDMA66 via controllers run slowly. They don't fail so
it's a borderline call whether this is -rc material or not.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Alan [Sat, 16 Dec 2006 12:54:29 +0000 (12:54 +0000)]
[PATCH] Fix help text for CONFIG_ATA_PIIX
> Thanks for clarifying Bill, and sorry Alan. ata_piix does indeed work
> correctly. The help text is a bit confusing:
>
> config ATA_PIIX
> tristate "Intel PIIX/ICH SATA support"
> depends on PCI
> help
> This option enables support for ICH5/6/7/8 Serial ATA.
> If PATA support was enabled previously, this enables
> support for select Intel PIIX/ICH PATA host controllers.
New help text
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Ira Snyder [Fri, 15 Dec 2006 21:08:52 +0000 (13:08 -0800)]
[PATCH] initializer entry defined twice in pata_rz1000
This removes the extra definition of the .error_handler member
in the pata_rz1000 driver.
Signed-off-by: Ira W. Snyder <kernel@irasnyder.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Akinobu Mita [Fri, 15 Dec 2006 21:08:51 +0000 (13:08 -0800)]
[PATCH] ata: fix platform_device_register_simple() error check
The return value of platform_device_register_simple() should be checked
by IS_ERR().
Cc: Jeff Garzik <jgarzik@pobox.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Tue, 12 Dec 2006 11:17:32 +0000 (20:17 +0900)]
[PATCH] ahci: do not mangle saved HOST_CAP while resetting controller
Do not mangle with HOST_CAP while resetting controller. The code is
there for a historical reason. The mangling breaks controller feature
detection and 0 PORTS_IMPL workaround code.
This problem was spotted by Manoj Kasichainula.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Manoj Kasichainula <manoj@io.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 11 Dec 2006 17:15:31 +0000 (02:15 +0900)]
[PATCH] libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2)
Calling sg_init_one() with NULL buf causes oops on certain
configurations. Don't initialize sg in ata_exec_internal() if
DMA_NONE and make the function complain if @buf is NULL when dma_dir
isn't DMA_NONE. While at it, fix comment.
The problem is discovered and initial patch was submitted by Arnd
Bergmann.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jeff Garzik [Thu, 14 Dec 2006 22:04:33 +0000 (17:04 -0500)]
[libata] sata_svw: Disable ATAPI DMA on current boards (errata workaround)
Current Broadcom/Serverworks SATA boards (including Apple K2 SATA)
have problems with ATAPI DMA, so it is disabled. ATAPI PIO, ATA PIO,
and ATA DMA continue to work just fine.
Acked-by: Anantha Subramanyam <ananth@broadcom.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jeff Garzik [Mon, 11 Dec 2006 16:05:53 +0000 (11:05 -0500)]
[libata] use kmap_atomic(KM_IRQ0) in SCSI simulator
We are inside spin_lock_irqsave(). quoth akpm's debug facility:
[ 231.948000] SCSI device sda:
195371568 512-byte hdwr sectors (100030 MB)
[ 232.232000] ata1.00: configured for UDMA/33
[ 232.404000] WARNING (1) at arch/i386/mm/highmem.c:47 kmap_atomic()
[ 232.404000] [<
c01162e6>] kmap_atomic+0xa9/0x1ab
[ 232.404000] [<
c0242c81>] ata_scsi_rbuf_get+0x1c/0x30
[ 232.404000] [<
c0242caf>] ata_scsi_rbuf_fill+0x1a/0x87
[ 232.404000] [<
c0243ab2>] ata_scsiop_mode_sense+0x0/0x309
[ 232.404000] [<
c01729d5>] end_bio_bh_io_sync+0x0/0x37
[ 232.404000] [<
c02311c6>] scsi_done+0x0/0x16
[ 232.404000] [<
c02311c6>] scsi_done+0x0/0x16
[ 232.404000] [<
c0242dcc>] ata_scsi_simulate+0xb0/0x13f
[...]
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 11 Dec 2006 13:26:25 +0000 (22:26 +0900)]
[PATCH] ata_piix: use piix_host_stop() in ich_pata_ops
piix_init_one() allocates host private data which should be freed by
piix_host_stop(). ich_pata_ops wasn't converted to piix_host_stop()
while merging, leaking 4 bytes on driver detach. Fix it.
This was spotted using Kmemleak by Catalin Marinas.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Catalin Marinas <catalin.marinas@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jason Gaston [Thu, 7 Dec 2006 16:57:32 +0000 (08:57 -0800)]
[PATCH] ata_piix: IDE mode SATA patch for Intel ICH9
This updated patch adds the Intel ICH9 IDE mode SATA controller DID's.
Signed-off-by: Jason Gaston <jason.d.gaston@intel.com>
Acked-by: Tejun Heo <htejun@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Roland Dreier [Sat, 16 Dec 2006 04:55:28 +0000 (20:55 -0800)]
IB/mthca: Use DEFINE_MUTEX() instead of mutex_init()
mthca_device_mutex() can be initialized automatically with
DEFINE_MUTEX() rather than explicitly calling mutex_init(). This
saves a bit of text and shrinks the source by a line, so we may as
well do it....
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Leonid Arsh [Sun, 10 Dec 2006 11:40:17 +0000 (13:40 +0200)]
IB/mthca: Add HCA profile module parameters
Add module parameters that enable settting some of the HCA
profile values, such as the number of QPs, CQs, etc.
Signed-off-by: Leonid Arsh <leonida@voltaire.com>
Signed-off-by: Moni Shoua <monis@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Linus Torvalds [Fri, 15 Dec 2006 22:13:51 +0000 (14:13 -0800)]
Fix "delayed_work_pending()" macro expansion
Nobody uses it, but it was still wrong. Using the macro argument name
'work' meant that when we used 'work' as a member name, that would also
get replaced by the macro argument.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Roland Dreier [Fri, 15 Dec 2006 22:01:49 +0000 (14:01 -0800)]
IB/srp: Fix FMR mapping for 32-bit kernels and addresses above 4G
struct srp_device.fmr_page_mask was unsigned long, which means that
the top part of addresses above 4G was being chopped off on 32-bit
architectures. Of course nothing good happens when data from SRP
targets is DMAed to the wrong place.
Fix this by changing fmr_page_mask to u64, to match the addresses
actually used by IB devices.
Thanks to Brian Cain <Brian.Cain@ge.com> and David McMillen
<davem@systemfabricworks.com> for help diagnosing the bug and testing
the fix.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Roland Dreier [Fri, 15 Dec 2006 21:57:26 +0000 (13:57 -0800)]
IB: Fix ib_dma_alloc_coherent() wrapper
The ib_dma_alloc_coherent() wrapper uses a u64* for the dma_handle
parameter, unlike dma_alloc_coherent, which uses dma_addr_t*. This
means that we need a temporary variable to handle the case when
ib_dma_alloc_coherent() just falls through directly to
dma_alloc_coherent() on architectures where sizeof u64 != sizeof
dma_addr_t.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Linus Torvalds [Fri, 15 Dec 2006 18:22:22 +0000 (10:22 -0800)]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
[S390] cio: css_register_subchannel race.
[S390] Save prefix register for dump on panic
[S390] Fix reboot hang
[S390] Fix reboot hang on LPARs
[S390] sclp_cpi module license.
[S390] zcrypt: module unload fixes.
[S390] Hipersocket multicast queue: make sure outbound handler is called
[S390] hypfs fixes
[S390] update default configuration
Linus Torvalds [Fri, 15 Dec 2006 16:43:13 +0000 (08:43 -0800)]
Remove stack unwinder for now
It has caused more problems than it ever really solved, and is
apparently not getting cleaned up and fixed. We can put it back when
it's stable and isn't likely to make warning or bug events worse.
In the meantime, enable frame pointers for more readable stack traces.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Stefan Bader [Fri, 15 Dec 2006 16:18:30 +0000 (17:18 +0100)]
[S390] cio: css_register_subchannel race.
Asynchronous probe can release memory of a subchannel before
css_get_ssd_info is called. To fix this call css_get_ssd_info
before registering with driver core.
Signed-off-by: Stefan Bader <shbader@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Michael Holzheu [Fri, 15 Dec 2006 16:18:27 +0000 (17:18 +0100)]
[S390] Save prefix register for dump on panic
The dump tools expect that the saved prefix register points to the
lowcore of the dump cpu. Since we set the prefix register to 0 during
reipl/dump, we have to save the original prefix register. Before we
start the dump program, we copy the original prefix register to the
designated location in the lowcore.
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Michael Holzheu [Fri, 15 Dec 2006 16:18:25 +0000 (17:18 +0100)]
[S390] Fix reboot hang
We use printks after shutting down all other cpus. This is not allowed
and can lead to deadlocks. Therefore the printks have to be removed.
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Michael Holzheu [Fri, 15 Dec 2006 16:18:22 +0000 (17:18 +0100)]
[S390] Fix reboot hang on LPARs
Reboot hangs on LPARs without diag308 support. The reason for this is,
that before the reboot is done, the channel subsystem is shut down.
During the reset on each possible subchannel a "store subchannel" is
done. This operation can end in a program check interruption, if the
specified subchannel set is not implemented by the hardware. During
the reset, currently we do not have a program check handler, which
leads to the described kernel bug. We install now a new program check
handler for the reboot code to fix this problem.
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Christian Borntraeger [Fri, 15 Dec 2006 16:18:20 +0000 (17:18 +0100)]
[S390] sclp_cpi module license.
sclp_cpi is GPL. Make the module not taint the kernel
Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Ralph Wuerthner [Fri, 15 Dec 2006 16:18:17 +0000 (17:18 +0100)]
[S390] zcrypt: module unload fixes.
Add code to reset all queues for a domain and add missing tasklet_kill
call to ap bus module exit code.
Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Ursula Braun [Fri, 15 Dec 2006 16:18:14 +0000 (17:18 +0100)]
[S390] Hipersocket multicast queue: make sure outbound handler is called
A HiperSocket multicast queue works asynchronously. When sending
buffers, the buffer state change from PRIMED to EMPTY may happen
delayed. Reschedule the checking for changes in the outbound queue,
if there are still PRIMED buffers.
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Christian Borntraeger [Fri, 15 Dec 2006 16:18:10 +0000 (17:18 +0100)]
[S390] hypfs fixes
Correct typo to make hypfs work on systems that support only diag204
subcode 4 and fix error handling in hypfs_diag_init.
Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Martin Schwidefsky [Fri, 15 Dec 2006 16:17:57 +0000 (17:17 +0100)]
[S390] update default configuration
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Jiri Kosina [Thu, 14 Dec 2006 11:03:30 +0000 (12:03 +0100)]
[PATCH] Generic HID layer - update MAINTAINERS
Update MAINTAINERS entry for HID core layer.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Florian Festi [Thu, 14 Dec 2006 10:59:11 +0000 (11:59 +0100)]
input/hid: Supporting more keys from the HUT Consumer Page
On USB keyboards lots of hot/internet keys are not working. This patch
adds support for a number of keys from the USB HID Usage Table
(http://www.usb.org/developers/devclass_docs/Hut1_12.pdf).
It also adds several new key codes. Most of them are used on real world
keyboards I know. I added some others (KEY_+ EDITOR, GRAPHICSEDITOR, DATABASE,
NEWS, VOICEMAIL, VIDEOPHONE) to avoid "holes".
I also added KEY_ZOOMRESET as it is possible to have a inet keyboard and a
remote control in parallel and it makes sense to have them behave differently.
Signed-off-by: Florian Festi <ffesti@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jiri Kosina [Thu, 14 Dec 2006 10:49:53 +0000 (11:49 +0100)]
[PATCH] Generic HID layer - build: USB_HID should select HID
Let CONFIG_USB_HID imply CONFIG_HID. Making it only dependent might confuse
users to choose CONFIG_HID, but no particular HID transport drivers.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Ben Collins [Thu, 14 Dec 2006 03:10:05 +0000 (22:10 -0500)]
[PATCH] ib_verbs: Use explicit if-else statements to avoid errors with do-while macros
At least on PPC, the "op ? op : dma" construct causes a compile failure
because the dma_* is a do{}while(0) macro.
This turns all of them into proper if/else to avoid this problem.
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Thu, 14 Dec 2006 01:14:23 +0000 (17:14 -0800)]
Linux v2.6.20-rc1
.. and so the stabilization phase starts.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Patrick McHardy [Thu, 14 Dec 2006 00:54:25 +0000 (16:54 -0800)]
[NETFILTER]: bridge-netfilter: remove deferred hooks
Remove the deferred hooks and all related code as scheduled in
feature-removal-schedule.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kim Nordlund [Thu, 14 Dec 2006 00:38:29 +0000 (16:38 -0800)]
[IPV6]: Make fib6_node subtree depend on IPV6_SUBTREES
Make fib6_node 'subtree' depend on IPV6_SUBTREES.
Signed-off-by: Kim Nordlund <kim.nordlund@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Skytte Jorgensen [Thu, 14 Dec 2006 00:34:22 +0000 (16:34 -0800)]
[SCTP]: Add support for SCTP_CONTEXT socket option.
Signed-off-by: Ivan Skytte Jorgensen <isj-sctp@i1.dk>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sridhar Samudrala [Thu, 14 Dec 2006 00:33:35 +0000 (16:33 -0800)]
[SCTP]: Enable auto loading of SCTP when creating an ipv6 SCTP socket.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sridhar Samudrala [Thu, 14 Dec 2006 00:26:26 +0000 (16:26 -0800)]
[SCTP]: Handle address add/delete events in a more efficient way.
Currently in SCTP, we maintain a local address list by rebuilding the whole
list from the device list whenever we get a address add/delete event.
This patch fixes it by only adding/deleting the address for which we
receive the event.
Also removed the sctp_local_addr_lock() which is no longer needed as we
now use list_for_each_safe() to traverse this list. This fixes the bugs
in sctp_copy_laddrs_xxx() routines where we do copy_to_user() while
holding this lock.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 14 Dec 2006 00:25:44 +0000 (16:25 -0800)]
[TCP]: Fix oops caused by __tcp_put_md5sig_pool()
It should call tcp_free_md5sig_pool() not __tcp_free_md5sig_pool()
so that it does proper refcounting.
Signed-off-by: David S. Miller <davem@davemloft.net>
Brian Haley [Wed, 13 Dec 2006 01:09:49 +0000 (17:09 -0800)]
[IPV6]: Fix IPV6_UNICAST_HOPS getsockopt().
> Relevant standard (RFC 3493) notes:
>
> The IPV6_UNICAST_HOPS option may be used with getsockopt() to
> determine the hop limit value that the system will use for subsequent
> unicast packets sent via that socket.
>
> I don't reckon -1 could be the hop limit value.
-1 means un-initialized.
> IMHO, the value from
> case 1 (if socket is connected to some destination), otherwise case 2
> (if bound to a scope interface) or ultimately the default hop limit
> ought to be returned instead, as it will be most often correct, while
> the current behavior is always wrong, unless setsockopt() has been used
> first. I don't if some people may think doing a route lookup in
> getsockopt might be overly expensive, but at least the two other cases
> should be ok, particularly the last one.
The following patch seems to work for me, but this code has behaved this
way for a while, so don't know if it will break any existing apps.
Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ian McDonald [Tue, 12 Dec 2006 02:47:59 +0000 (00:47 -0200)]
[DCCP] ccid3: return value in ccid3_hc_rx_calc_first_li
In a recent patch we introduced invalid return codes which will result in the
opposite of what is intended (i.e. send more packets in face of peculiar
network conditions).
This fixes it by returning ~0 which means not calculated as per
dccp_li_hist_calc_i_mean.
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Al Viro [Tue, 12 Dec 2006 08:29:52 +0000 (00:29 -0800)]
[NETFILTER]: {ip,ip6,arp}_tables: fix exponential worst-case search for loops
If we come to node we'd already marked as seen and it's not a part of path
(i.e. we don't have a loop right there), we already know that it isn't a
part of any loop, so we don't need to revisit it.
That speeds the things up if some chain is refered to from several places
and kills O(exp(table size)) worst-case behaviour (without sleeping,
at that, so if you manage to self-LART that way, you are SOL for a long
time)...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Mishin [Tue, 12 Dec 2006 08:29:26 +0000 (00:29 -0800)]
[NETFILTER]: ip_tables: ipt and ipt_compat checks unification
Matches and targets verification is duplicated in normal and compat processing
ways. This patch refactors code in order to remove this.
Signed-off-by: Dmitry Mishin <dim@openvz.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yasuyuki Kozakai [Tue, 12 Dec 2006 08:29:02 +0000 (00:29 -0800)]
[NETFILTER]: x_tables: add missing try to load conntrack from match/targets
CLUSTERIP, CONNMARK, CONNSECMARK, and connbytes need ip_conntrack or
layer 3 protocol module of nf_conntrack.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yasuyuki Kozakai [Tue, 12 Dec 2006 08:28:40 +0000 (00:28 -0800)]
[NETFILTER]: x_tables: error if ip_conntrack is asked to handle IPv6 packets
To do that, this makes nf_ct_l3proto_try_module_{get,put} compatible
functions. As a result we can remove '#ifdef' surrounds and direct call of
need_conntrack().
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yasuyuki Kozakai [Tue, 12 Dec 2006 08:28:09 +0000 (00:28 -0800)]
[NETFILTER]: nf_nat: fix NF_NAT dependency
NF_NAT depends on NF_CONNTRACK_IPV4, not NF_CONNTRACK.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Tue, 12 Dec 2006 08:27:46 +0000 (00:27 -0800)]
[NETFILTER]: Fix INET=n linking error
Building with INET=n results in
WARNING: "ip_route_output_key" [net/netfilter/nf_conntrack_h323.ko] undefined!
The entire code in net/netfilter is only used for IPv4/IPv6 currently, so
let it depend on INET.
Noticed by Toralf Förster <toralf.foerster@gmx.de>.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 13 Dec 2006 23:58:32 +0000 (15:58 -0800)]
Merge branch 'for-linus' of /home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 4017/1: [Jornada7xx] - Updating Jornada720.c
[ARM] 3992/1: i.MX/MX1 CPU Frequency scaling support
[ARM] Provide a method to alter the control register
[ARM] 4016/1: prefetch macro is wrong wrt gcc's "delete-null-pointer-checks"
[ARM] Remove empty fixup function
[ARM] 4014/1: include drivers/hid/Kconfig
[ARM] 4013/1: clocksource driver for netx
[ARM] 4012/1: Clocksource for pxa
[ARM] Clean up ioremap code
[ARM] Unuse another Linux PTE bit
[ARM] Clean up KERNEL_RAM_ADDR
[ARM] Add sys_*at syscalls
[ARM] 4004/1: S3C24XX: UDC remove implict addition of VA to regs
[ARM] Formalise the ARMv6 processor name string
[ARM] Handle HWCAP_VFP in VFP support code
[ARM] 4011/1: AT91SAM9260: Fix compilation with NAND driver
[ARM] 4010/1: AT91SAM9260-EK board: Prepare for MACB Ethernet support
Linus Torvalds [Wed, 13 Dec 2006 23:57:58 +0000 (15:57 -0800)]
Merge branch 'release' of /home/ftp/linux/kernel/git/aegl/linux-2.6
* 'release' of master.kernel.org:/home/ftp/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] Move sg_dma_{len,address} from pci.h to scatterlist.h
David Brownell [Tue, 5 Dec 2006 11:07:38 +0000 (03:07 -0800)]
Driver core: deprecate PM_LEGACY, default it to N
Deprecate the old "legacy" PM API, and more importantly default it to "n".
Virtually nothing in-tree uses it any more.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Scott Wood [Mon, 4 Dec 2006 22:57:19 +0000 (14:57 -0800)]
Driver core: Make platform_device_add_data accept a const pointer
platform_device_add_data() makes a copy of the data that is given to it,
and thus the parameter can be const. This removes a warning when data
from get_property() on powerpc is handed to platform_device_add_data(),
as get_property() returns a const pointer.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Morton [Mon, 4 Dec 2006 22:56:36 +0000 (14:56 -0800)]
Driver core: "platform_driver_probe() can save codespace": save codespace
This function can be __init
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mathieu Desnoyers [Fri, 24 Nov 2006 18:51:14 +0000 (13:51 -0500)]
DebugFS : file/directory removal fix
Fix file and directory removal in debugfs. Add inotify support for file removal.
The following scenario :
create dir a
create dir a/b
cd a/b (some process goes in cwd a/b)
rmdir a/b
rmdir a
fails due to the fact that "a" appears to be non empty. It is because
the "b" dentry is not deleted from "a" and still in use. The same
problem happens if "b" is a file. d_delete is nice enough to know when
it needs to unhash and free the dentry if nothing else is using it or,
if someone is using it, to remove it from the hash queues and wait for
it to be deleted when it has no users.
The nice side-effect of this fix is that it calls the file removal
notification.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mathieu Desnoyers [Fri, 24 Nov 2006 18:50:09 +0000 (13:50 -0500)]
DebugFS : more file/directory creation error handling
Correct dentry count to handle creation errors.
This patch puts a dput at the file creation instead of the file removal :
lookup_one_len already returns a dentry with reference count of 1. Then,
the dget() in simple_mknod increments it when the dentry is associated
with a file. In a scenario where simple_create or simple_mkdir returns
an error, this would lead to an unwanted increment of the reference
counter, therefore making file removal impossible.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mathieu Desnoyers [Fri, 24 Nov 2006 18:48:19 +0000 (13:48 -0500)]
DebugFS : file/directory creation error handling
Fix error handling of file and directory creation in DebugFS.
The error path should release the file system because no _remove will be called
for this erroneous creation.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mathieu Desnoyers [Fri, 24 Nov 2006 18:46:30 +0000 (13:46 -0500)]
DebugFS : coding style fixes
Minor coding style fixes along the way : 80 cols and a white space.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mathieu Desnoyers [Fri, 24 Nov 2006 18:45:37 +0000 (13:45 -0500)]
DebugFS : inotify create/mkdir support
Add inotify create and mkdir events to DebugFS.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Akinobu Mita [Mon, 20 Nov 2006 19:53:18 +0000 (04:53 +0900)]
driver core: delete virtual directory on class_unregister()
Class virtual directory is created as the need arises.
But it is not deleted when the class is unregistered.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kay Sievers [Fri, 24 Nov 2006 11:15:25 +0000 (12:15 +0100)]
Driver core: show "initstate" of module
Show the initialization state(live, coming, going) of the module:
$ cat /sys/module/usbcore/initstate
live
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Venkatesh Pallipadi [Wed, 13 Dec 2006 18:41:16 +0000 (10:41 -0800)]
[CPUFREQ] Trivial cleanup for acpi read/write port in acpi-cpufreq.c
Small cleanup in acpi-cpufreq.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>