OSDN Git Service
Shaik Sajida Bhanu [Mon, 16 Aug 2021 16:50:50 +0000 (22:20 +0530)]
arm64: dts: qcom: sc7180: Use maximum drive strength values for eMMC
The current drive strength values are not sufficient on non discrete
boards and this leads to CRC errors during switching to HS400 enhanced
strobe mode.
Hardware simulation results on non discrete boards shows up that use the
maximum drive strength values for data and command lines could helps
in avoiding these CRC errors.
So, update data and command line drive strength values to maximum.
Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1629132650-26277-1-git-send-email-sbhanu@codeaurora.org
Sujit Kautkar [Mon, 20 Sep 2021 18:32:50 +0000 (11:32 -0700)]
arm64: dts: qcom: sc7180-trogdor: Enable IPA on LTE only SKUs
Enable the IPA node for LTE and skip for wifi-only SKUs
Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210920113220.v1.1.I904da9664f294fcf222f6f378d37eaadd72ca92e@changeid
Stephan Gerhold [Tue, 21 Sep 2021 15:21:20 +0000 (17:21 +0200)]
arm64: dts: qcom: msm8916: Add "qcom,msm8916-sdhci" compatible
According to Documentation/devicetree/bindings/mmc/sdhci-msm.txt
a SoC specific compatible should be used in addition to the IP version
compatible, but for some reason it was never added for MSM8916.
Add the "qcom,msm8916-sdhci" compatible additionally to make the
device tree match the documented bindings.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210921152120.6710-3-stephan@gerhold.net
Stephan Gerhold [Tue, 21 Sep 2021 15:21:18 +0000 (17:21 +0200)]
arm64: dts: qcom: msm8916: Add unit name for /soc node
This fixes the following warning when building with W=1:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property,
but no unit name
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210921152120.6710-1-stephan@gerhold.net
Stephen Boyd [Wed, 11 Aug 2021 18:19:04 +0000 (11:19 -0700)]
arm64: dts: qcom: sc7280: Use GIC_SPI for intc cells
Let's use the GIC_SPI macro instead of a plain 0 here to match other
uses of the primary interrupt controller on sc7280.
Suggested-by: Matthias Kaehlcke <mka@chromium.org>
Cc: Alex Elder <elder@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210811181904.779316-1-swboyd@chromium.org
Manaf Meethalavalappu Pallikunhi [Wed, 11 Aug 2021 14:23:55 +0000 (19:53 +0530)]
arm64: dts: qcom: sc7280: Add gpu thermal zone cooling support
Add cooling-cells property and the cooling maps for the gpu thermal
zones to support GPU thermal cooling.
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1628691835-36958-2-git-send-email-akhilpo@codeaurora.org
Akhil P Oommen [Wed, 11 Aug 2021 14:23:54 +0000 (19:53 +0530)]
arm64: dts: qcom: sc7280: Add gpu support
Add the necessary dt nodes for gpu support in sc7280.
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1628691835-36958-1-git-send-email-akhilpo@codeaurora.org
Taniya Das [Wed, 11 Aug 2021 00:42:51 +0000 (06:12 +0530)]
arm64: dts: qcom: sc7280: Add clock controller ID headers
Add the GPUCC, DISPCC and VIDEOCC clock headers which were dropped
earlier.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1628642571-25383-1-git-send-email-tdas@codeaurora.org
satya priya [Fri, 17 Sep 2021 11:10:40 +0000 (16:40 +0530)]
arm64: dts: qcom: sc7280: Add volume up support for sc7280-idp
Add pm7325 PMIC gpio support for vol+ on sc7280-idp.
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631877040-26587-1-git-send-email-skakit@codeaurora.org
Dmitry Baryshkov [Thu, 16 Sep 2021 15:13:41 +0000 (18:13 +0300)]
arm64: dts: qcom: qrb5165-rb5: enabled pwrkey and resin nodes
Enable powerkey and resin nodes to let the board handle POWER and
Volume- keys properly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210916151341.1797512-3-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Thu, 16 Sep 2021 15:13:40 +0000 (18:13 +0300)]
arm64: dts: qcom: pm8150: specify reboot mode magics
Specify recovery and bootloader magic values to be programmed by the
qcom-pon driver. This allows the bootloader to handle
reboot-to-bootloader functionality.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210916151341.1797512-2-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Thu, 16 Sep 2021 15:13:39 +0000 (18:13 +0300)]
arm64: dts: qcom: pm8150: use qcom,pm8998-pon binding
Change pm8150 to use the qcom,pm8998-pon compatible string for the pon
in order to pass reboot mode properly.
Fixes:
5101f22a5c37 ("arm64: dts: qcom: pm8150: Add base dts file")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210916151341.1797512-1-dmitry.baryshkov@linaro.org
Kathiravan T [Tue, 31 Aug 2021 05:57:32 +0000 (08:57 +0300)]
arm64: dts: qcom: ipq6018: add usb3 DT description
Based on downstream codeaurora code.
Tested (USB2 only) on IPQ6010 based hardware.
Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[bjorn: Changed dwc3 node name to usb, per binding]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/ebc2d340d566fa2d43127e253d5b8b134a87a78e.1630389452.git.baruch@tkos.co.il
Shawn Guo [Tue, 31 Aug 2021 05:23:25 +0000 (13:23 +0800)]
arm64: dts: qcom: Update BAM DMA node name per DT schema
Follow dma-controller.yaml schema to use `dma-controller` as node name
of BAM DMA devices.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210831052325.21229-1-shawn.guo@linaro.org
Douglas Anderson [Mon, 30 Aug 2021 15:06:37 +0000 (08:06 -0700)]
arm64: dts: qcom: sc7280: Move the SD CD GPIO pin out of the dtsi file
There's nothing magical about GPIO91 and boards could use different
GPIOs for card detect. Move the pin out of the dtsi file and to the
only existing board file.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210830080621.1.Ia15d97bc4a81f2916290e23a8fde9cbc66186159@changeid
Shawn Guo [Sun, 29 Aug 2021 11:16:28 +0000 (19:16 +0800)]
arm64: dts: qcom: sdm845: Fix qcom,controlled-remotely property
Property qcom,controlled-remotely should be boolean. Fix it.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829111628.5543-4-shawn.guo@linaro.org
Shawn Guo [Sun, 29 Aug 2021 11:16:27 +0000 (19:16 +0800)]
arm64: dts: qcom: ipq8074: Fix qcom,controlled-remotely property
Property qcom,controlled-remotely should be boolean. Fix it.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829111628.5543-3-shawn.guo@linaro.org
Shawn Guo [Sun, 29 Aug 2021 11:16:26 +0000 (19:16 +0800)]
arm64: dts: qcom: ipq6018: Fix qcom,controlled-remotely property
Property qcom,controlled-remotely should be boolean. Fix it.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829111628.5543-2-shawn.guo@linaro.org
Rajendra Nayak [Wed, 25 Aug 2021 10:36:58 +0000 (16:06 +0530)]
arm64: dts: qcom: sc7280: Define CPU topology
sc7280 has 8 big.LITTLE CPUs setup with DynamIQ, so all cores are
within the same CPU cluster. Add cpu-map to define the CPU topology.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1629887818-28489-1-git-send-email-rnayak@codeaurora.org
Bjorn Andersson [Mon, 31 May 2021 22:44:53 +0000 (15:44 -0700)]
arm64: dts: qcom: apq8016-sbc: Update modem and WiFi firmware path
The firmware for the modem and WiFi subsystems platform specific and is
signed with a OEM specific key (or a test key). In order to support more
than a single device it is therefor not possible to rely on the default
path and stash these files directly in the firmware directory.
This has already been addressed for other platforms, but the APQ8016 SBC
(aka db410c) was never finished upstream.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210531224453.783218-1-bjorn.andersson@linaro.org
Steev Klimaszewski [Tue, 14 Sep 2021 18:16:03 +0000 (13:16 -0500)]
arm64: dts: qcom: c630: add second channel for wifi
On the Lenovo Yoga C630, the WiFi/BT chip can use both RF
channels/antennas, so add the regulator for it.
Signed-off-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210914181603.32708-1-steev@kali.org
Kuogee Hsieh [Thu, 9 Sep 2021 19:49:58 +0000 (12:49 -0700)]
arm64: dts: qcom: sc7280: fix display port phy reg property
Existing display port phy reg property is derived from usb phy which
map display port phy pcs to wrong address which cause aux init
with wrong address and prevent both dpcd read and write from working.
Fix this problem by assigning correct pcs address to display port
phy reg property.
Fixes:
bb9efa59c665 ("arm64: dts: qcom: sc7280: Add USB related nodes")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631216998-10049-1-git-send-email-khsieh@codeaurora.org
Matthias Kaehlcke [Thu, 9 Sep 2021 19:21:01 +0000 (12:21 -0700)]
arm64: dts: qcom: Add sc7180-trogdor-homestar
Homestar is a trogdor variant. The DT bits are essentially the same as
in the downstream tree, except for:
- skip -rev0 and rev1 which were early builds and have their issues,
it's not very useful to support them upstream
- don't include the .dtsi for the MIPI cameras, which doesn't exist
upstream
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210909122053.1.Ieafda79b74f74a2b15ed86e181c06a3060706ec5@changeid
Robert Marko [Sun, 5 Sep 2021 16:58:16 +0000 (18:58 +0200)]
arm64: dts: qcom: ipq8074: add SPMI bus
IPQ8074 uses SPMI for communication with the PMIC, so
since its already supported add the DT node for it.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210905165816.655275-1-robimarko@gmail.com
AngeloGioacchino Del Regno [Thu, 9 Sep 2021 12:36:28 +0000 (14:36 +0200)]
arm64: dts: qcom: pmi8998: Add node for WLED
The PMI8998 PMIC has a WLED backlight controller, which is used on
most MSM8998 and SDM845 based devices: add a base configuration for
it and keep it disabled.
This contains only the PMIC specific configuration that does not
change across boards; parameters like number of strings, OVP and
current limits are product specific and shall be specified in the
product DT in order to achieve functionality.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210909123628.365968-1-angelogioacchino.delregno@somainline.org
Matthias Kaehlcke [Fri, 3 Sep 2021 19:22:19 +0000 (12:22 -0700)]
arm64: dts: qcom: sc7180-trogdor: Delete ADC config for unused thermistors
The charger thermistor on Lazor, CoachZ rev1 and Pompom rev1+2 is
either the wrong part or not stuffed at all, the same is true for
the skin temperature thermistor on CoachZ rev1. The corresponding
thermal zones are already disabled for these devices, in addition
delete the ADC nodes of the thermistors.
For Lazor and CoachZ rev1 also disable the PM6150 ADC and thermal
monitor since none of the ADC channels is used.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210903122212.v2.1.I9777d0036ecbb749a4fb9ebb892f94c6e3a51772@changeid
Robert Marko [Thu, 2 Sep 2021 22:03:25 +0000 (00:03 +0200)]
arm64: dts: qcom: ipq8074: remove USB tx-fifo-resize property
tx-fifo-resize is now added by default by the dwc3-qcom driver
to the SNPS DWC3 child node.
So, lets drop the tx-fifo-resize property from dwc3-qcom nodes
as having it there will cause the dwc3-qcom driver to error and
abort probe with:
[ 1.362938] dwc3-qcom
8af8800.usb: unable to add property
[ 1.368405] dwc3-qcom
8af8800.usb: failed to register DWC3 Core, err=-17
Fixes:
cefdd52fa045 ("usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210902220325.1783567-1-robimarko@gmail.com
Douglas Anderson [Thu, 2 Sep 2021 21:51:37 +0000 (14:51 -0700)]
arm64: dts: qcom: sc7180: Base dynamic CPU power coefficients in reality
The sc7180's dynamic-power-coefficient violates the device tree bindings.
The bindings (arm/cpus.yaml) say that the units for the
dynamic-power-coefficient are supposed to be "uW/MHz/V^2". The ones for
sc7180 aren't this. Qualcomm arbitrarily picked 100 for the "little" CPUs
and then picked a number for the big CPU based on this.
At the time, there was a giant dicussion about this. Apparently Qualcomm
Engineers were instructed not to share the actual numbers here. As part
of the discussion, I pointed out [1] that these numbers shouldn't really
be secret since once a device is shipping anyone can just run a script
and produce them. This patch is the result of running the script I posted
in that discussion on sc7180-trogdor-coachz, which is currently available
for purchase by consumers.
[1] https://lore.kernel.org/r/CAD=FV=U1FP0e3_AVHpauUUZtD-5X3XCwh5aT9fH_8S_FFML2Uw@mail.gmail.com/
I ran the script four times, measuring little, big, little, big. I used
the 64-bit version of dhrystone 2.2 in my test. I got these results:
576 kHz, 596 mV, 20 mW, 88 Cx
768 kHz, 596 mV, 32 mW, 122 Cx
1017 kHz, 660 mV, 45 mW, 97 Cx
1248 kHz, 720 mV, 87 mW, 139 Cx
1324 kHz, 756 mV, 109 mW, 148 Cx
1516 kHz, 828 mV, 150 mW, 148 Cx
1612 kHz, 884 mV, 182 mW, 147 Cx
1708 kHz, 884 mV, 192 mW, 146 Cx
1804 kHz, 884 mV, 207 mW, 149 Cx
Your dynamic-power-coefficient for cpu 0: 132
825 kHz, 596 mV, 142 mW, 401 Cx
979 kHz, 628 mV, 183 mW, 427 Cx
1113 kHz, 656 mV, 224 mW, 433 Cx
1267 kHz, 688 mV, 282 mW, 449 Cx
1555 kHz, 812 mV, 475 mW, 450 Cx
1708 kHz, 828 mV, 566 mW, 478 Cx
1843 kHz, 884 mV, 692 mW, 476 Cx
1900 kHz, 884 mV, 722 mW, 482 Cx
1996 kHz, 916 mV, 814 mW, 482 Cx
2112 kHz, 916 mV, 862 mW, 483 Cx
2208 kHz, 916 mV, 962 mW, 521 Cx
2323 kHz, 940 mV, 1060 mW, 517 Cx
2400 kHz, 956 mV, 1133 mW, 518 Cx
Your dynamic-power-coefficient for cpu 6: 471
576 kHz, 596 mV, 26 mW, 103 Cx
768 kHz, 596 mV, 40 mW, 147 Cx
1017 kHz, 660 mV, 54 mW, 114 Cx
1248 kHz, 720 mV, 97 mW, 151 Cx
1324 kHz, 756 mV, 113 mW, 150 Cx
1516 kHz, 828 mV, 154 mW, 148 Cx
1612 kHz, 884 mV, 194 mW, 155 Cx
1708 kHz, 884 mV, 203 mW, 152 Cx
1804 kHz, 884 mV, 219 mW, 155 Cx
Your dynamic-power-coefficient for cpu 0: 142
825 kHz, 596 mV, 148 mW, 530 Cx
979 kHz, 628 mV, 189 mW, 475 Cx
1113 kHz, 656 mV, 230 mW, 461 Cx
1267 kHz, 688 mV, 287 mW, 466 Cx
1555 kHz, 812 mV, 469 mW, 445 Cx
1708 kHz, 828 mV, 567 mW, 480 Cx
1843 kHz, 884 mV, 699 mW, 482 Cx
1900 kHz, 884 mV, 719 mW, 480 Cx
1996 kHz, 916 mV, 814 mW, 484 Cx
2112 kHz, 916 mV, 861 mW, 483 Cx
2208 kHz, 916 mV, 963 mW, 522 Cx
2323 kHz, 940 mV, 1063 mW, 520 Cx
2400 kHz, 956 mV, 1135 mW, 519 Cx
Your dynamic-power-coefficient for cpu 6: 489
As you can see, the calculations aren't perfectly consistent but
roughly you could say about 480 for big and 137 for little.
The ratio between these numbers isn't quite the same as the ratio
between the two numbers that Qualcomm used. Perhaps this is because
Qualcomm measured something slightly different than the 64-bit version
of dhrystone 2.2 or perhaps it's because they fudged these numbers a
bit (and fudged the capacity-dmips-mhz). As per discussion [2], let's
use the numbers I came up with and also un-fudge
capacity-dmips-mhz. While unfudging capacity-dmips-mhz, let's scale it
so that bigs are 1024 which seems to be the common practice.
In general these numbers don't need to be perfectly exact. In fact,
they can't be since the CPU power depends a lot on what's being run on
the CPU and the big/little CPUs are each more or less efficient in
different operations. Historically running the 32-bit vs. 64-bit
versions of dhrystone produced notably different numbers, though I
didn't test this time.
We also need to scale all of the sustainable-power numbers by the same
amount. I scale ones related to the big CPUs by the adjustment I made
to the big dynamic-power-coefficient and the ones related to the
little CPUs by the adjustment I made to the little
dynamic-power-coefficient.
[2] https://lore.kernel.org/r/
0a865b6e-be34-6371-f9f2-
9913ee1c5608@codeaurora.org/
Fixes:
71f873169a80 ("arm64: dts: qcom: sc7180: Add dynamic CPU power coefficients")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210902145127.v2.1.I049b30065f3c715234b6303f55d72c059c8625eb@changeid
Raffaele Tranquillini [Wed, 1 Sep 2021 19:35:39 +0000 (19:35 +0000)]
arm64: dts: qcom: msm8996: xiaomi-gemini: Add support for Xiaomi Mi 5
Add a device tree for Xiaomi Mi 5 (gemini).
Signed-off-by: Raffaele Tranquillini <raffaele.tranquillini@gmail.com>
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901193214.250375-5-y.oudjana@protonmail.com
Yassine Oudjana [Wed, 1 Sep 2021 19:33:42 +0000 (19:33 +0000)]
arm64: dts: qcom: msm8996: Add support for the Xiaomi MSM8996 platform
There are 5 Xiaomi devices with the MSM8996 SoC:
- Mi 5 (gemini): MSM8996 + PMI8994
- Mi Note 2 (scorpio): MSM8996 Pro + PMI8996
- Mi 5s (capricorn): MSM8996 Pro + PMI8996
- Mi Mix (lithium): MSM8996 Pro + PMI8996
- Mi 5s Plus (natrium): MSM8996 Pro + PMI8996
These devices share a common board design with only a few differences.
Add support for the common board, as well as support for the Mi Note 2.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901193214.250375-4-y.oudjana@protonmail.com
Yassine Oudjana [Wed, 1 Sep 2021 19:33:32 +0000 (19:33 +0000)]
arm64: dts: qcom: msm8996: Add blsp2_i2c3
Add a node for blsp2_i2c3 which is used for type-C port control chips
and speaker codecs on some devices.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901193214.250375-3-y.oudjana@protonmail.com
Yassine Oudjana [Wed, 1 Sep 2021 19:33:24 +0000 (19:33 +0000)]
arm64: dts: qcom: db820c: Move blsp1_uart2 pin states to msm8996.dtsi
Move blsp1_uart2_default and blsp1_uart2_sleep to the SoC device tree to
avoid duplicating them in other device trees.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901193214.250375-2-y.oudjana@protonmail.com
AngeloGioacchino Del Regno [Wed, 1 Sep 2021 18:31:23 +0000 (20:31 +0200)]
arm64: dts: qcom: msm8998: Configure Adreno GPU and related IOMMU
The MSM8998 SoC includes an Adreno 540.1 GPU, with a maximum frequency
of 710MHz. This GPU may or may not accept a ZAP shader, depending on
platform configuration, so adding a zap-shader node is left to the
board DT.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901183123.1087392-5-angelogioacchino.delregno@somainline.org
AngeloGioacchino Del Regno [Wed, 1 Sep 2021 18:31:22 +0000 (20:31 +0200)]
arm64: dts: qcom: msm8998: Move qfprom iospace to calibrated values
The QFPROM iospace was (erroneously, I believe) set to the uncalibrated
fuse start address, but every driver only needs - and will always only
need - only calibrated values.
Move the iospace forward to the calibrated values start to avoid
offsetting every fuse definition.
Obviously, the only defined fuse (qusb2_hstx_trim) was also fixed to
remove the offset, in order to comply with this change.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901183123.1087392-4-angelogioacchino.delregno@somainline.org
AngeloGioacchino Del Regno [Wed, 1 Sep 2021 18:31:21 +0000 (20:31 +0200)]
arm64: dts: qcom: msm8998: Fix CPU/L2 idle state latency and residency
The entry/exit latency and minimum residency in state for the idle
states of MSM8998 were ..bad: first of all, for all of them the
timings were written for CPU sleep but the min-residency-us param
was miscalculated (supposedly, while porting this from downstream);
Then, the power collapse states are setting PC on both the CPU
cluster *and* the L2 cache, which have different timings: in the
specific case of L2 the times are higher so these ones should be
taken into account instead of the CPU ones.
This parameter misconfiguration was not giving particular issues
because on MSM8998 there was no CPU scaling at all, so cluster/L2
power collapse was rarely (if ever) hit.
When CPU scaling is enabled, though, the wrong timings will produce
SoC unstability shown to the user as random, apparently error-less,
sudden reboots and/or lockups.
This set of parameters are stabilizing the SoC when CPU scaling is
ON and when power collapse is frequently hit.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901183123.1087392-3-angelogioacchino.delregno@somainline.org
AngeloGioacchino Del Regno [Wed, 1 Sep 2021 18:31:20 +0000 (20:31 +0200)]
arm64: dts: qcom: msm8998: Configure the multimedia subsystem iommu
In preparation for enabling various components of the multimedia
subsystem, write configuration for its related IOMMU.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901183123.1087392-2-angelogioacchino.delregno@somainline.org
AngeloGioacchino Del Regno [Wed, 1 Sep 2021 18:31:19 +0000 (20:31 +0200)]
arm64: dts: qcom: msm8998: Configure the MultiMedia Clock Controller (MMCC)
The MSM8998 MMCC is supported and has a driver: configure it as a
preparation for a later enablement of multimedia nodes (mdp, venus
and others).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901183123.1087392-1-angelogioacchino.delregno@somainline.org
Thara Gopinath [Mon, 9 Aug 2021 19:16:03 +0000 (15:16 -0400)]
arm64: dts: qcom: sdm845: Remove cpufreq cooling devices for CPU thermal zones
Now that Limits h/w is enabled to monitor thermal events around cpus and
throttle the cpu frequencies, remove cpufreq cooling device for the CPU
thermal zones which does software throttling of cpu frequencies.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210809191605.3742979-6-thara.gopinath@linaro.org
Thara Gopinath [Mon, 9 Aug 2021 19:16:02 +0000 (15:16 -0400)]
arm64: dts: qcom: sdm845: Add support for LMh node
Add LMh nodes for CPU cluster0 and CPU cluster1. Also add interrupt
support in cpufreq node to capture the LMh interrupt and let the scheduler
know of the max frequency throttling.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210809191605.3742979-5-thara.gopinath@linaro.org
Rajendra Nayak [Mon, 13 Sep 2021 10:58:55 +0000 (16:28 +0530)]
arm64: dts: qcom: sc7280-idp: Add vcc-supply for qfprom
Add vcc-supply for the IDP boards that was missed when the
qfprom device tree properties were added for the sc7280 SoC.
Fixes:
c1b2189a19cf ("arm64: dts: qcom: sc7280: Add qfprom node")
Reported-by: satya priya <skakit@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631530735-19811-1-git-send-email-rnayak@codeaurora.org
Marijn Suijten [Sat, 11 Sep 2021 12:01:01 +0000 (14:01 +0200)]
arm64: dts: qcom: msm8998: Provide missing "xo" and "sleep_clk" to GCC
In a future patch the GCC driver will stop requesting this xo clock by
its global "xo" name, in favour of having an explicit phandle here in
the DT. Aside from that this clock in addition to the mandatory
"sleep_clk" were never passed despite being required by the relevant
dt-bindings.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210911120101.248476-1-marijn.suijten@somainline.org
Bhupesh Sharma [Wed, 19 May 2021 14:36:50 +0000 (20:06 +0530)]
arm64: dts: qcom: sdm845: Use RPMH_CE_CLK macro directly
In commit
3e482859f1ef ("dts: qcom: sdm845: Add dt entries
to support crypto engine."), we decided to use the value indicated
by constant RPMH_CE_CLK rather than using it directly.
Now that the same RPMH clock value might be used for other
SoCs (in addition to sdm845), let's use the constant
RPMH_CE_CLK to make sure that this dtsi is compatible with the
other qcom ones.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Link: https://lore.kernel.org/r/20210519143700.27392-8-bhupesh.sharma@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Linus Torvalds [Sun, 12 Sep 2021 23:28:37 +0000 (16:28 -0700)]
Linux 5.15-rc1
Linus Torvalds [Sun, 12 Sep 2021 23:18:15 +0000 (16:18 -0700)]
Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git./linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Add missing fields and remove some duplicate fields when printing a
perf_event_attr.
- Fix hybrid config terms list corruption.
- Update kernel header copies, some resulted in new kernel features
being automagically added to 'perf trace' syscall/tracepoint argument
id->string translators.
- Add a file generated during the documentation build to .gitignore.
- Add an option to build without libbfd, as some distros, like Debian
consider its ABI unstable.
- Add support to print a textual representation of IBS raw sample data
in 'perf report'.
- Fix bpf 'perf test' sample mismatch reporting
- Fix passing arguments to stackcollapse report in a 'perf script'
python script.
- Allow build-id with trailing zeros.
- Look for ImageBase in PE file to compute .text offset.
* tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits)
tools headers UAPI: Update tools's copy of drm.h headers
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/fs.h with the kernel sources
tools headers UAPI: Sync linux/in.h copy with the kernel sources
perf tools: Add an option to build without libbfd
perf tools: Allow build-id with trailing zeros
perf tools: Fix hybrid config terms list corruption
perf tools: Factor out copy_config_terms() and free_config_terms()
perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
perf tools: Ignore Documentation dependency file
perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
tools include UAPI: Update linux/mount.h copy
perf beauty: Cover more flags in the move_mount syscall argument beautifier
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
perf report: Add support to print a textual representation of IBS raw sample data
perf report: Add tools/arch/x86/include/asm/amd-ibs.h
perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings
...
Linus Torvalds [Sun, 12 Sep 2021 23:09:26 +0000 (16:09 -0700)]
Merge tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux
Pull compiler attributes updates from Miguel Ojeda:
- Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver)
- Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers)
- Move __compiletime_{error|warning} (Nick Desaulniers)
* tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux:
compiler_attributes.h: move __compiletime_{error|warning}
MAINTAINERS: add Nick as Reviewer for compiler_attributes.h
Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4
Linus Torvalds [Sun, 12 Sep 2021 23:00:49 +0000 (16:00 -0700)]
Merge tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux
Pull auxdisplay updates from Miguel Ojeda:
"An assortment of improvements for auxdisplay:
- Replace symbolic permissions with octal permissions (Jinchao Wang)
- ks0108: Switch to use module_parport_driver() (Andy Shevchenko)
- charlcd: Drop unneeded initializers and switch to C99 style (Andy
Shevchenko)
- hd44780: Fix oops on module unloading (Lars Poeschel)
- Add I2C gpio expander example (Ralf Schlatterbeck)"
* tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux:
auxdisplay: Replace symbolic permissions with octal permissions
auxdisplay: ks0108: Switch to use module_parport_driver()
auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style
auxdisplay: hd44780: Fix oops on module unloading
auxdisplay: Add I2C gpio expander example
Linus Torvalds [Sun, 12 Sep 2021 19:42:51 +0000 (12:42 -0700)]
Merge tag 'smp-urgent-2021-09-12' of git://git./linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
"Updates for the SMP and CPU hotplug:
- Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the
original hotplug code and now causing trouble with the ARM64 cache
topology setup due to the pointless SMP function call.
It's not longer required as the hotplug callbacks are guaranteed to
be invoked on the upcoming CPU.
- Remove the deprecated and now unused CPU hotplug functions
- Rewrite the CPU hotplug API documentation"
* tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: core-api/cpuhotplug: Rewrite the API section
cpu/hotplug: Remove deprecated CPU-hotplug functions.
thermal: Replace deprecated CPU-hotplug functions.
drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()
Linus Torvalds [Sun, 12 Sep 2021 18:56:00 +0000 (11:56 -0700)]
Merge tag 'char-misc-5.15-rc1-lkdtm' of git://git./linux/kernel/git/gregkh/char-misc
Pull misc driver fix from Greg KH:
"Here is a single patch for 5.15-rc1, for the lkdtm misc driver.
It resolves a build issue that many people were hitting with your
current tree, and Kees and others felt would be good to get merged
before -rc1 comes out, to prevent them from having to constantly hit
it as many development trees restart on -rc1, not older -rc releases.
It has NOT been in linux-next, but has passed 0-day testing and looks
'obviously correct' when reviewing it locally :)"
* tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
lkdtm: Use init_uts_ns.name instead of macros
Linus Torvalds [Sun, 12 Sep 2021 18:44:58 +0000 (11:44 -0700)]
Merge tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"A couple of very minor fixes for style and rate limiting.
Nothing big, but probably needs to go in"
* tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi:
char: ipmi: use DEVICE_ATTR helper macro
ipmi: rate limit ipmi smi_event failure message
Linus Torvalds [Sun, 12 Sep 2021 18:37:41 +0000 (11:37 -0700)]
Merge tag 'sched_urgent_for_v5.15_rc1' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Make sure the idle timer expires in hardirq context, on PREEMPT_RT
- Make sure the run-queue balance callback is invoked only on the
outgoing CPU
* tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Prevent balance_push() on remote runqueues
sched/idle: Make the idle timer expire in hard interrupt context
Linus Torvalds [Sun, 12 Sep 2021 18:27:05 +0000 (11:27 -0700)]
Merge tag 'locking_urgent_for_v5.15_rc1' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Fix the futex PI requeue machinery to not return to userspace in
inconsistent state
- Avoid a potential null pointer dereference in the ww_mutex deadlock
check
- Other smaller cleanups and optimizations
* tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Fix ww_mutex deadlock check
futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic()
futex: Avoid redundant task lookup
futex: Clarify comment for requeue_pi_wake_futex()
futex: Prevent inconsistent state and exit race
futex: Return error code instead of assigning it without effect
locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT
Linus Torvalds [Sun, 12 Sep 2021 18:10:31 +0000 (11:10 -0700)]
Merge tag 'timers_urgent_for_v5.15_rc1' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Handle negative second values properly when converting a timespec64
to nanoseconds.
* tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Handle negative seconds correctly in timespec64_to_ns()
Linus Torvalds [Sun, 12 Sep 2021 17:43:51 +0000 (10:43 -0700)]
Merge branch 'misc.namei' of git://git./linux/kernel/git/viro/vfs
Pull namei updates from Al Viro:
"Clearing fallout from mkdirat in io_uring series. The fix in the
kern_path_locked() patch plus associated cleanups"
* 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
putname(): IS_ERR_OR_NULL() is wrong here
namei: Standardize callers of filename_create()
namei: Standardize callers of filename_lookup()
rename __filename_parentat() to filename_parentat()
namei: Fix use after free in kern_path_locked
Linus Torvalds [Sun, 12 Sep 2021 17:10:21 +0000 (10:10 -0700)]
Merge tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smbfs updates from Steve French:
"cifs/smb3 updates:
- DFS reconnect fix
- begin creating common headers for server and client
- rename the cifs_common directory to smbfs_common to be more
consistent ie change use of the name cifs to smb (smb3 or smbfs is
more accurate, as the very old cifs dialect has long been
superseded by smb3 dialects).
In the future we can rename the fs/cifs directory to fs/smbfs.
This does not include the set of multichannel fixes nor the two
deferred close fixes (they are still being reviewed and tested)"
* tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: properly invalidate cached root handle when closing it
cifs: move SMB FSCTL definitions to common code
cifs: rename cifs_common to smbfs_common
cifs: update FSCTL definitions
Linus Torvalds [Sat, 11 Sep 2021 21:48:42 +0000 (14:48 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- vduse driver ("vDPA Device in Userspace") supporting emulated virtio
block devices
- virtio-vsock support for end of record with SEQPACKET
- vdpa: mac and mq support for ifcvf and mlx5
- vdpa: management netlink for ifcvf
- virtio-i2c, gpio dt bindings
- misc fixes and cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
Documentation: Add documentation for VDUSE
vduse: Introduce VDUSE - vDPA Device in Userspace
vduse: Implement an MMU-based software IOTLB
vdpa: Support transferring virtual addressing during DMA mapping
vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
vhost-iotlb: Add an opaque pointer for vhost IOTLB
vhost-vdpa: Handle the failure of vdpa_reset()
vdpa: Add reset callback in vdpa_config_ops
vdpa: Fix some coding style issues
file: Export receive_fd() to modules
eventfd: Export eventfd_wake_count to modules
iova: Export alloc_iova_fast() and free_iova_fast()
virtio-blk: remove unneeded "likely" statements
virtio-balloon: Use virtio_find_vqs() helper
vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
vsock_test: update message bounds test for MSG_EOR
af_vsock: rename variables in receive loop
virtio/vsock: support MSG_EOR bit processing
vhost/vsock: support MSG_EOR bit processing
...
Linus Torvalds [Sat, 11 Sep 2021 21:29:42 +0000 (14:29 -0700)]
Merge tag 'riscv-for-linus-5.15-mw1' of git://git./linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- A pair of defconfig additions, for NVMe and the EFI filesystem
localization options.
- A larger address space for stack randomization.
- A cleanup to our install rules.
- A DTS update for the Microchip Icicle board, to fix the serial
console.
- Support for build-time table sorting, which allows us to have
__ex_table read-only.
* tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Move EXCEPTION_TABLE to RO_DATA segment
riscv: Enable BUILDTIME_TABLE_SORT
riscv: dts: microchip: mpfs-icicle: Fix serial console
riscv: move the (z)install rules to arch/riscv/Makefile
riscv: Improve stack randomisation on RV64
riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1
riscv: defconfig: enable BLK_DEV_NVME
Linus Torvalds [Sat, 11 Sep 2021 21:22:28 +0000 (14:22 -0700)]
Merge branch 'for-5.15' of git://git./linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
"These changes update some existing semantic patches with
respect to some recent changes in the kernel.
Specifically, the change to kvmalloc.cocci searches for
kfree_sensitive rather than kzfree, and the change to
use_after_iter.cocci adds list_entry_is_head as a valid
use of a list iterator index variable after the end of
the loop"
* 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
scripts: coccinelle: allow list_entry_is_head() to use pos
coccinelle: api: rename kzfree to kfree_sensitive
Arnaldo Carvalho de Melo [Mon, 3 May 2021 14:48:26 +0000 (11:48 -0300)]
tools headers UAPI: Update tools's copy of drm.h headers
Picking the changes from:
17ce9c61c71cbc0d ("drm: document DRM_IOCTL_MODE_RMFB")
Doesn't result in any tooling changes:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
Silencing these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 11 Sep 2021 19:18:28 +0000 (16:18 -0300)]
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
To pick the changes in:
b65a9489730a2494 ("drm/i915/userptr: Probe existence of backing struct pages upon creation")
ee242ca704d38699 ("drm/i915/guc: Implement GuC priority management")
81340cf3bddded4f ("drm/i915/uapi: reject set_domain for discrete")
7961c5b60f23dff5 ("drm/i915: Add TTM offset argument to mmap.")
aef7b67a79564f6c ("drm/i915/uapi: convert drm_i915_gem_userptr to kernel doc")
e7737b67ab46ee0e ("drm/i915/uapi: reject caching ioctls for discrete")
3aa8c57fe25a9247 ("drm/i915/uapi: convert drm_i915_gem_set_domain to kernel doc")
289f5a72009b8f67 ("drm/i915/uapi: convert drm_i915_gem_caching to kernel doc")
4a766ae40ec83301 ("drm/i915: Drop the CONTEXT_CLONE API (v2)")
6ff6d61dd2a943bd ("drm/i915: Drop I915_CONTEXT_PARAM_NO_ZEROMAP")
fe4751c3d513ff4f ("drm/i915: Drop I915_CONTEXT_PARAM_RINGSIZE")
577729533cdc4e37 ("drm/i915: Document the Virtual Engine uAPI")
c649432e86ca677d ("drm/i915: Fix busy ioctl commentary")
That doesn't result in any changes to tooling as no new ioctl were
added (at least not perceived by tools/perf/trace/beauty/drm_ioctl.sh).
Addressing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 21 May 2021 19:00:31 +0000 (16:00 -0300)]
tools headers UAPI: Sync linux/fs.h with the kernel sources
To pick the change in:
7957d93bf32bc211 ("block: add ioctl to read the disk sequence number")
It adds a new ioctl, but we are still not using that to generate tables
for 'perf trace', so no changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 19 Jun 2021 13:15:22 +0000 (10:15 -0300)]
tools headers UAPI: Sync linux/in.h copy with the kernel sources
To pick the changes in:
db243b796439c0ca ("net/ipv4/ipv6: Replace one-element arraya with flexible-array members")
2d3e5caf96b9449a ("net/ipv4: Replace one-element array with flexible-array member")
That don't result in any change in tooling, the structs changed remains
with the same layout.
This addresses this build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
Cc: David S. Miller <davem@davemloft.net>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 10 Sep 2021 22:57:56 +0000 (15:57 -0700)]
perf tools: Add an option to build without libbfd
Some distributions, like debian, don't link perf with libbfd. Add a
build flag to make this configuration buildable and testable.
This was inspired by:
https://lore.kernel.org/linux-perf-users/
20210910102307.
2055484-1-tonyg@leastfixedpoint.com/T/#u
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: tony garnock-jones <tonyg@leastfixedpoint.com>
Link: http://lore.kernel.org/lkml/20210910225756.729087-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 10 Sep 2021 22:46:30 +0000 (15:46 -0700)]
perf tools: Allow build-id with trailing zeros
Currently perf saves a build-id with size but old versions assumes the
size of 20. In case the build-id is less than 20 (like for MD5), it'd
fill the rest with 0s.
I saw a problem when old version of perf record saved a binary in the
build-id cache and new version of perf reads the data. The symbols
should be read from the build-id cache (as the path no longer has the
same binary) but it failed due to mismatch in the build-id.
symsrc__init: build id mismatch for /home/namhyung/.debug/.build-id/53/
e4c2f42a4c61a2d632d92a72afa08f00000000/elf.
The build-id event in the data has 20 byte build-ids, but it saw a
different size (16) when it reads the build-id of the elf file in the
build-id cache.
$ readelf -n ~/.debug/.build-id/53/
e4c2f42a4c61a2d632d92a72afa08f00000000/elf
Displaying notes found in: .note.gnu.build-id
Owner Data size Description
GNU 0x00000010 NT_GNU_BUILD_ID (unique build ID bitstring)
Build ID:
53e4c2f42a4c61a2d632d92a72afa08f
Let's fix this by allowing trailing zeros if the size is different.
Fixes:
39be8d0115b321ed ("perf tools: Pass build_id object to dso__build_id_equal()")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210910224630.1084877-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Thu, 9 Sep 2021 12:55:08 +0000 (15:55 +0300)]
perf tools: Fix hybrid config terms list corruption
A config terms list was spliced twice, resulting in a never-ending loop
when the list was traversed. Fix by using list_splice_init() and copying
and freeing the lists as necessary.
This patch also depends on patch "perf tools: Factor out
copy_config_terms() and free_config_terms()"
Example on ADL:
Before:
# perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname &
# jobs
[1]+ Running perf record -e "{intel_pt//,cycles/aux-sample-size=4096/pp}" uname
# perf top -E 10
PerfTop: 4071 irqs/sec kernel: 6.9% exact: 100.0% lost: 0/0 drop: 0/0 [4000Hz cycles], (all, 24 CPUs)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
97.60% perf [.] __evsel__get_config_term
0.25% [kernel] [k] kallsyms_expand_symbol.constprop.13
0.24% perf [.] kallsyms__parse
0.15% [kernel] [k] _raw_spin_lock
0.14% [kernel] [k] number
0.13% [kernel] [k] advance_transaction
0.08% [kernel] [k] format_decode
0.08% perf [.] map__process_kallsym_symbol
0.08% perf [.] rb_insert_color
0.08% [kernel] [k] vsnprintf
exiting.
# kill %1
After:
# perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname &
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.060 MB perf.data ]
# perf script | head
perf-exec 604 [001] 1827.312293: psb: psb offs: 0
ffffffffb8415e87 pt_config_start+0x37 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches:
ffffffffb856a3bd event_sched_in.isra.133+0xfd ([kernel.kallsyms]) =>
ffffffffb856a9a0 perf_pmu_nop_void+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches:
ffffffffb856b10e merge_sched_in+0x26e ([kernel.kallsyms]) =>
ffffffffb856a2c0 event_sched_in.isra.133+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches:
ffffffffb856a45d event_sched_in.isra.133+0x19d ([kernel.kallsyms]) =>
ffffffffb8568b80 perf_event_set_state.part.61+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches:
ffffffffb8568b86 perf_event_set_state.part.61+0x6 ([kernel.kallsyms]) =>
ffffffffb85662a0 perf_event_update_time+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches:
ffffffffb856a35c event_sched_in.isra.133+0x9c ([kernel.kallsyms]) =>
ffffffffb8567610 perf_log_itrace_start+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches:
ffffffffb856a377 event_sched_in.isra.133+0xb7 ([kernel.kallsyms]) =>
ffffffffb8403b40 x86_pmu_add+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches:
ffffffffb8403b86 x86_pmu_add+0x46 ([kernel.kallsyms]) =>
ffffffffb8403940 collect_events+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches:
ffffffffb8403a7b collect_events+0x13b ([kernel.kallsyms]) =>
ffffffffb8402cd0 collect_event+0x0 ([kernel.kallsyms])
Fixes:
30def61f64bac5 ("perf parse-events Create two hybrid cache events")
Fixes:
94da591b1c7913 ("perf parse-events Create two hybrid raw events")
Fixes:
9cbfa2f64c04d9 ("perf parse-events Create two hybrid hardware events")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https //lore.kernel.org/r/
20210909125508.28693-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Thu, 9 Sep 2021 12:55:07 +0000 (15:55 +0300)]
perf tools: Factor out copy_config_terms() and free_config_terms()
Factor out copy_config_terms() and free_config_terms() so that they can
be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https //lore.kernel.org/r/
20210909125508.28693-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Sat, 11 Sep 2021 12:05:50 +0000 (15:05 +0300)]
perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
Some fields are missing and text_poke is duplicated. Fix that up.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210911120550.12203-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 10 Sep 2021 23:22:49 +0000 (16:22 -0700)]
perf tools: Ignore Documentation dependency file
When building directly on the checked out repository the build process
produces a file that should be ignored, so add it to .gitignore.
Fixes:
a81df63a5df3e195 ("perf doc: Fix doc.dep")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210910232249.739661-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sat, 11 Sep 2021 17:28:14 +0000 (10:28 -0700)]
Merge tag 'io_uring-5.15-2021-09-11' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Fix an off-by-one in a BUILD_BUG_ON() check. Not a real issue right
now as we have plenty of flags left, but could become one. (Hao)
- Fix lockdep issue introduced in this merge window (me)
- Fix a few issues with the worker creation (me, Pavel, Qiang)
- Fix regression with wq_has_sleeper() for IOPOLL (Pavel)
- Timeout link error propagation fix (Pavel)
* tag 'io_uring-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
io_uring: fix off-by-one in BUILD_BUG_ON check of __REQ_F_LAST_BIT
io_uring: fail links of cancelled timeouts
io-wq: fix memory leak in create_io_worker()
io-wq: fix silly logic error in io_task_work_match()
io_uring: drop ctx->uring_lock before acquiring sqd->lock
io_uring: fix missing mb() before waitqueue_active
io-wq: fix cancellation on create-worker failure
Linus Torvalds [Sat, 11 Sep 2021 17:19:51 +0000 (10:19 -0700)]
Merge tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph:
- fix nvmet command set reporting for passthrough controllers (Adam Manzanares)
- update a MAINTAINERS email address (Chaitanya Kulkarni)
- set QUEUE_FLAG_NOWAIT for nvme-multipth (me)
- handle errors from add_disk() (Luis Chamberlain)
- update the keep alive interval when kato is modified (Tatsuya Sasaki)
- fix a buffer overrun in nvmet_subsys_attr_serial (Hannes Reinecke)
- do not reset transport on data digest errors in nvme-tcp (Daniel Wagner)
- only call synchronize_srcu when clearing current path (Daniel Wagner)
- revalidate paths during rescan (Hannes Reinecke)
- Split out the fs/block_dev into block/fops.c and block/bdev.c, which
has been long overdue. Do this now before -rc1, to avoid annoying
conflicts due to this (Christoph)
- blk-throtl use-after-free fix (Li)
- Improve plug depth for multi-device plugs, greatly increasing md
resync performance (Song)
- blkdev_show() locking fix (Tetsuo)
- n64cart error check fix (Yang)
* tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
n64cart: fix return value check in n64cart_probe()
blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues
block: move fs/block_dev.c to block/bdev.c
block: split out operations on block special files
blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()
block: genhd: don't call blkdev_show() with major_names_lock held
nvme: update MAINTAINERS email address
nvme: add error handling support for add_disk()
nvme: only call synchronize_srcu when clearing current path
nvme: update keep alive interval when kato is modified
nvme-tcp: Do not reset transport on data digest errors
nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()
nvmet: return bool from nvmet_passthru_ctrl and nvmet_is_passthru_req
nvmet: looks at the passthrough controller when initializing CAP
nvme: move nvme_multi_css into nvme.h
nvme-multipath: revalidate paths during rescan
nvme-multipath: set QUEUE_FLAG_NOWAIT
Linus Torvalds [Sat, 11 Sep 2021 17:18:20 +0000 (10:18 -0700)]
Merge tag 'libata-5.15-2021-09-11' of git://git.kernel.dk/linux-block
Pull libata maintainer update from Jens Axboe:
"Damien agreed to take over maintainership of libata, and he would be a
great candidate for it. Update the MAINTAINERS entry to reflect the
change in maintainer and git tree"
* tag 'libata-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
libata: pass over maintainership to Damien Le Moal
Linus Torvalds [Sat, 11 Sep 2021 17:16:30 +0000 (10:16 -0700)]
Merge tag 'trace-v5.15-3' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Minor fixes to the processing of the bootconfig tree"
* tag 'trace-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: Rename xbc_node_find_child() to xbc_node_find_subkey()
tracing/boot: Fix to check the histogram control param is a leaf node
tracing/boot: Fix trace_boot_hist_add_array() to check array is value
Linus Torvalds [Sat, 11 Sep 2021 17:12:46 +0000 (10:12 -0700)]
Merge tag 'devicetree-fixes-for-5.15-1' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Disable fw_devlinks on x86 DT platforms to fix OLPC
- More replacing oneOf+const with enum on a few new schemas
- Drop unnecessary type references on Xilinx SPI binding schema
* tag 'devicetree-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
spi: dt-bindings: xilinx: Drop type reference on *-bits properties
dt-bindings: More use 'enum' instead of 'oneOf' plus 'const' entries
of: property: Disable fw_devlink DT support for X86
Linus Torvalds [Sat, 11 Sep 2021 17:05:56 +0000 (10:05 -0700)]
Merge tag 'clk-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One patch to fix an unused variable warning in a Qualcomm clk driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-sm6350: Remove unused variable
Linus Torvalds [Sat, 11 Sep 2021 16:54:53 +0000 (09:54 -0700)]
Merge tag 'rtc-5.15' of git://git./linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"The broken down time conversion is similar to what is done in the time
subsystem since v5.14. The rest is fairly straightforward.
Subsystem:
- Switch to Neri and Schneider time conversion algorithm
Drivers:
- rx8025: add rx8035 support
- s5m: modernize driver and set range"
* tag 'rtc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: rx8010: select REGMAP_I2C
dt-bindings: rtc: add Epson RX-8025 and RX-8035
rtc: rx8025: implement RX-8035 support
rtc: cmos: remove stale REVISIT comments
rtc: tps65910: Correct driver module alias
rtc: move RTC_LIB_KUNIT_TEST to proper location
rtc: lib_test: add MODULE_LICENSE
rtc: Improve performance of rtc_time64_to_tm(). Add tests.
rtc: s5m: set range
rtc: s5m: enable wakeup only when available
rtc: s5m: signal the core when alarm are not available
rtc: s5m: switch to devm_rtc_allocate_device
Linus Torvalds [Sat, 11 Sep 2021 16:47:33 +0000 (09:47 -0700)]
Merge tag 'firewire-update' of git://git./linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Stefan Richter:
- Migrate the bus snooper driver 'nosy' from PCI to DMA API
- Small janitorial cleanup in the IPv4/v6-over-1394 driver
[ The 'nosy' change already come in as a different commit through Greg
KH in the misc tree back in the previous merge window, so only the
cleanup ends up being new to 5.15 - Linus ]
* tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: nosy: switch from 'pci_' to 'dma_' API
firewire: net: remove unused variable 'guid'
Linus Torvalds [Sat, 11 Sep 2021 16:26:00 +0000 (09:26 -0700)]
Merge tag 'pwm/for-5.15-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"The changes this time around are mostly janitorial in nature. A lot of
this is simplifications of drivers using device-managed functions and
improving compilation coverage.
The Mediatek display PWM driver now supports the atomic API.
Cleanups and minor fixes make up the remainder of this set"
* tag 'pwm/for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (54 commits)
pwm: mtk-disp: Implement atomic API .get_state()
pwm: mtk-disp: Fix overflow in period and duty calculation
pwm: mtk-disp: Implement atomic API .apply()
pwm: mtk-disp: Adjust the clocks to avoid them mismatch
dt-bindings: pwm: rockchip: Add description for rk3568
pwm: Make pwmchip_remove() return void
pwm: sun4i: Don't check the return code of pwmchip_remove()
pwm: sifive: Don't check the return code of pwmchip_remove()
pwm: samsung: Don't check the return code of pwmchip_remove()
pwm: renesas-tpu: Don't check the return code of pwmchip_remove()
pwm: rcar: Don't check the return code of pwmchip_remove()
pwm: pca9685: Don't check the return code of pwmchip_remove()
pwm: omap-dmtimer: Don't check the return code of pwmchip_remove()
pwm: mtk-disp: Don't check the return code of pwmchip_remove()
pwm: imx-tpm: Don't check the return code of pwmchip_remove()
pwm: img: Don't check the return code of pwmchip_remove()
pwm: cros-ec: Don't check the return code of pwmchip_remove()
pwm: brcmstb: Don't check the return code of pwmchip_remove()
pwm: atmel-tcb: Don't check the return code of pwmchip_remove()
pwm: atmel-hlcdc: Don't check the return code of pwmchip_remove()
...
Linus Torvalds [Sat, 11 Sep 2021 16:20:57 +0000 (09:20 -0700)]
Merge tag 'thermal-v5.15-rc1' of git://git./linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add the tegra3 thermal sensor and fix the compilation testing on
tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST
(Dmitry Osipenko)
- Fix the error code for the exynos when devm_get_clk() fails (Dan
Carpenter)
- Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar)
- Add support for hardware trip points for the rcar gen3 thermal driver
and store TSC id as unsigned int (Niklas Söderlund)
- Replace the deprecated CPU-hotplug functions get_online_cpus() and
put_online_cpus (Sebastian Andrzej Siewior)
- Add the thermal tools directory in the MAINTAINERS file (Daniel
Lezcano)
- Fix the Makefile and the cross compilation flags for the userspace
'tmon' tool (Rolf Eike Beer)
- Allow to use the IMOK independently from the GDDV on Int340x (Sumeet
Pawnikar)
- Fix the stub thermal_cooling_device_register() function prototype
which does not match the real function (Arnd Bergmann)
- Make the thermal trip point optional in the DT bindings (Maxime
Ripard)
- Fix a typo in a comment in the core code (Geert Uytterhoeven)
- Reduce the verbosity of the trace in the SoC thermal tegra driver
(Dmitry Osipenko)
- Add the support for the LMh (Limit Management hardware) driver on the
QCom platforms (Thara Gopinath)
- Allow processing of HWP interrupt by adding a weak function in the
Intel driver (Srinivas Pandruvada)
- Prevent an abort of the sensor probe is a channel is not used
(Matthias Kaehlcke)
* tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used
thermal/drivers/intel: Allow processing of HWP interrupt
dt-bindings: thermal: Add dt binding for QCOM LMh
thermal/drivers/qcom: Add support for LMh driver
firmware: qcom_scm: Introduce SCM calls to access LMh
thermal/drivers/tegra-soctherm: Silence message about clamped temperature
thermal: Spelling s/scallbacks/callbacks/
dt-bindings: thermal: Make trips node optional
thermal/core: Fix thermal_cooling_device_register() prototype
thermal/drivers/int340x: Use IMOK independently
tools/thermal/tmon: Add cross compiling support
thermal/tools/tmon: Improve the Makefile
MAINTAINERS: Add missing userspace thermal tools to the thermal section
thermal/drivers/intel_powerclamp: Replace deprecated CPU-hotplug functions.
thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int
thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points
drivers/thermal/intel: Add TCC cooling support for AlderLake platform
thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()
thermal/drivers/tegra: Correct compile-testing of drivers
thermal/drivers/tegra: Add driver for Tegra30 thermal sensor
Linus Torvalds [Sat, 11 Sep 2021 16:08:28 +0000 (09:08 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- several device tree bindings for input devices have been converted to
yaml
- dropped no longer used ixp4xx-beeper and CSR Prima2 PWRC drivers
- analog joystick has been converted to use ktime API and no longer
warn about low resolution timers
- a few driver fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
Input: analog - always use ktime functions
Input: mms114 - support MMS134S
Input: elan_i2c - reduce the resume time for controller in Whitebox
Input: edt-ft5x06 - added case for EDT EP0110M09
Input: adc-keys - drop bogus __refdata annotation
Input: Fix spelling mistake in Kconfig "useable" -> "usable"
Input: Fix spelling mistake in Kconfig "Modul" -> "Module"
Input: remove dead CSR Prima2 PWRC driver
Input: adp5589-keys - use the right header
Input: adp5588-keys - use the right header
dt-bindings: input: tsc2005: Convert to YAML schema
Input: ep93xx_keypad - prepare clock before using it
dt-bindings: input: sun4i-lradc: Add wakeup-source
dt-bindings: input: Convert Regulator Haptic binding to a schema
dt-bindings: input: Convert Pixcir Touchscreen binding to a schema
dt-bindings: input: Convert ChipOne ICN8318 binding to a schema
Input: pm8941-pwrkey - fix comma vs semicolon issue
dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml
dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml
dt-bindings: power: reset: Change 'additionalProperties' to true
...
Jisheng Zhang [Thu, 26 Aug 2021 14:11:18 +0000 (22:11 +0800)]
riscv: Move EXCEPTION_TABLE to RO_DATA segment
_ex_table section is read-only, so move it to RO_DATA.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Jisheng Zhang [Thu, 26 Aug 2021 14:10:29 +0000 (22:10 +0800)]
riscv: Enable BUILDTIME_TABLE_SORT
Enable BUILDTIME_TABLE_SORT to sort the exception table at build time
rather than during boot.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Geert Uytterhoeven [Thu, 26 Aug 2021 13:19:39 +0000 (15:19 +0200)]
riscv: dts: microchip: mpfs-icicle: Fix serial console
Currently, nothing is output on the serial console, unless
"console=ttyS0,115200n8" or "earlycon" are appended to the kernel
command line. Enable automatic console selection using
chosen/stdout-path by adding a proper alias, and configure the expected
serial rate.
While at it, add aliases for the other three serial ports, which are
provided on the same micro-USB connector as the first one.
Fixes:
0fa6107eca4186ad ("RISC-V: Initial DTS for Microchip ICICLE board")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Masahiro Yamada [Thu, 29 Jul 2021 14:21:47 +0000 (23:21 +0900)]
riscv: move the (z)install rules to arch/riscv/Makefile
Currently, the (z)install targets in arch/riscv/Makefile descend into
arch/riscv/boot/Makefile to invoke the shell script, but there is no
good reason to do so.
arch/riscv/Makefile can run the shell script directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Kefeng Wang [Thu, 12 Aug 2021 11:47:02 +0000 (19:47 +0800)]
riscv: Improve stack randomisation on RV64
This enlarges the bits availiable for stack randomisation on RV64 from
the default of 8MiB to 1GiB, to match arm64 and x86.
Also, update the documentation to reflect our support for stack
randomisation.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[Palmer: commit text]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Heinrich Schuchardt [Thu, 12 Aug 2021 08:10:27 +0000 (10:10 +0200)]
riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1
The EFI system partition uses the FAT file system. Many distributions add
an entry in /etc/fstab for the ESP. We must ensure that mounting does not
fail.
The default code page for FAT is 437 (cf. CONFIG_FAT_DEFAULT_CODEPAGE).
The default IO character set is "iso8859-1" (cf. CONFIG_NLS_ISO8859_1).
So let's enable NLS_CODEPAGE_437 and NLS_ISO8859_1 in defconfig.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Heinrich Schuchardt [Thu, 12 Aug 2021 08:10:26 +0000 (10:10 +0200)]
riscv: defconfig: enable BLK_DEV_NVME
NVMe is a non-volatile storage media attached via PCIe.
As NVMe has much higher throughput than other block devices like
SATA it is a must have for RISC-V. Enable CONFIG_BLK_DEV_NVME.
The HiFive Unmatched is a board providing M.2 slots for NVMe drives.
Enable CONFIG_PCIE_FU740.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Thomas Gleixner [Thu, 9 Sep 2021 12:34:59 +0000 (14:34 +0200)]
Documentation: core-api/cpuhotplug: Rewrite the API section
Dave stumbled over the incomplete and confusing documentation of the CPU
hotplug API.
Rewrite it, add the missing function documentations and correct the
existing ones.
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210909123212.489059409@linutronix.de
Sebastian Andrzej Siewior [Tue, 3 Aug 2021 14:16:21 +0000 (16:16 +0200)]
cpu/hotplug: Remove deprecated CPU-hotplug functions.
No users in tree use the deprecated CPU-hotplug functions anymore.
Remove them.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210803141621.780504-39-bigeasy@linutronix.de
Sebastian Andrzej Siewior [Tue, 3 Aug 2021 14:16:02 +0000 (16:16 +0200)]
thermal: Replace deprecated CPU-hotplug functions.
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210803141621.780504-20-bigeasy@linutronix.de
Thomas Gleixner [Fri, 10 Sep 2021 22:38:47 +0000 (00:38 +0200)]
Merge branch 'linus' into smp/urgent
Ensure that all usage sites of get/put_online_cpus() except for the
struggler in drivers/thermal are gone. So the last user and the deprecated
inlines can be removed.
Arnaldo Carvalho de Melo [Fri, 10 Sep 2021 20:26:53 +0000 (17:26 -0300)]
perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
The btf__get_from_id() function was deprecated in favour of
btf__load_from_kernel_by_id(), but it is still avaiable, so use it to
provide a weak function btf__load_from_kernel_by_id() for older libbpf
when building perf with LIBBPF_DYNAMIC=1, i.e. using the system's libbpf
package.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 1 Jul 2021 16:34:38 +0000 (13:34 -0300)]
tools include UAPI: Update linux/mount.h copy
To pick the changes from:
9ffb14ef61bab83f ("move_mount: allow to add a mount into an existing group")
That ends up adding support for the new MOVE_MOUNT_SET_GROUP move_mount
flag.
$ tools/perf/trace/beauty/move_mount_flags.sh > before
$ cp include/uapi/linux/mount.h tools/include/uapi/linux/mount.h
$ tools/perf/trace/beauty/move_mount_flags.sh > after
$ diff -u before after
--- before 2021-09-10 12:28:43.
865279808 -0300
+++ after 2021-09-10 12:28:50.
183429184 -0300
@@ -5,4 +5,5 @@
[ilog2(0x00000010) + 1] = "T_SYMLINKS",
[ilog2(0x00000020) + 1] = "T_AUTOMOUNTS",
[ilog2(0x00000040) + 1] = "T_EMPTY_PATH",
+ [ilog2(0x00000100) + 1] = "SET_GROUP",
};
$
So now one can use it in --filter expressions for tracepoints.
This silences this perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/mount.h' differs from latest version at 'include/uapi/linux/mount.h'
diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 10 Sep 2021 15:24:19 +0000 (12:24 -0300)]
perf beauty: Cover more flags in the move_mount syscall argument beautifier
Previously the regext expected MOVE_MOUNT_[FT]_*, but in the next patch
a flag that doesn't match that expression will be added, MOVE_MOUNT_SET_GROUP
To make this more future proof, take advantage of the fact that the only
one we don't need to cover is MOVE_MOUNT__MASK and use MOVE_MOUNT_[^_]+_*_.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 11 Feb 2021 15:50:52 +0000 (12:50 -0300)]
tools headers UAPI: Sync linux/prctl.h with the kernel sources
To pick the changes in:
433c38f40f6a81cf ("arm64: mte: change ASYNC and SYNC TCF settings into bitfields")
e893bb1bb4d2eb63 ("x86, prctl: Hook L1D flushing in via prctl")
That don't result in any changes in tooling:
$ tools/perf/trace/beauty/prctl_option.sh > before
$ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h
$ tools/perf/trace/beauty/prctl_option.sh > after
$ diff -u before after
$
Just silences this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h'
diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Cc: Balbir Singh <sblbir@amazon.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 12 Feb 2020 14:04:23 +0000 (11:04 -0300)]
tools include UAPI: Sync sound/asound.h copy with the kernel sources
Picking the changes from:
81be10934949da8b ("ALSA: pcm: Add SNDRV_PCM_INFO_EXPLICIT_SYNC flag")
Which entails no changes in the tooling side as it doesn't introduce new
ioctls.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sun, 9 May 2021 12:39:02 +0000 (09:39 -0300)]
tools headers UAPI: Sync linux/kvm.h with the kernel sources
To pick the changes in:
f95937ccf5bd5e0a ("KVM: stats: Support linear and logarithmic histogram statistics")
f0376edb1ddcab19 ("KVM: arm64: Add ioctl to fetch/store tags in a guest")
ea7fc1bb1cd1b92b ("KVM: arm64: Introduce MTE VM feature")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This is also by now used by tools/testing/selftests/kvm/, so that will
pick the new KVM_STATS_TYPE_LINEAR_HIST and KVM_STATS_TYPE_LOG_HIST
defines.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Jing Zhang <jingzhangos@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 10 Sep 2021 14:46:54 +0000 (11:46 -0300)]
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
To pick the changes in:
61e5f69ef08379cd ("KVM: x86: implement KVM_GUESTDBG_BLOCKIRQ")
That just rebuilds kvm-stat.c on x86, no change in functionality.
This silences these perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kim Phillips [Tue, 17 Aug 2021 22:15:09 +0000 (17:15 -0500)]
perf report: Add support to print a textual representation of IBS raw sample data
Perf records IBS (Instruction Based Sampling) extra sample data when
'perf record --raw-samples' is used with an IBS-compatible event, on a
machine that supports IBS. IBS support is indicated in
CPUID_Fn80000001_ECX bit #10.
Up until now, users have been able to see the extra sample data solely
in raw hex format using 'perf report --dump-raw-trace'. From there,
users could decode the data either manually, or by using an external
script.
Enable the built-in 'perf report --dump-raw-trace' to do the decoding of
the extra sample data bits, so manual or external script decoding isn't
necessary.
Example usage:
$ sudo perf record -c
10000001 -a --raw-samples -e ibs_fetch/rand_en=1/,ibs_op/cnt_ctl=1/ -C 0,1 taskset -c 0,1 7za b -mmt2 | perf report --dump-raw-trace
Stdout contains IBS Fetch samples, e.g.:
ibs_fetch_ctl:
02170007ffffffff MaxCnt
1048560 Cnt
1048560 Lat 7 En 1 Val 1 Comp 1 IcMiss 0 PhyAddrValid 1 L1TlbPgSz 4KB L1TlbMiss 0 L2TlbMiss 0 RandEn 1 L2Miss 0
IbsFetchLinAd:
000056016b2ead40
IbsFetchPhysAd:
000000115cedfd40
c_ibs_ext_ctl:
0000000000000000 IbsItlbRefillLat 0
..and IBS Op samples, e.g.:
ibs_op_ctl:
0000009e009e8968 MaxCnt
10000000 En 1 Val 1 CntCtl 1=uOps CurCnt 158
IbsOpRip:
000056016b2ea73d
ibs_op_data:
00000000000b0002 CompToRetCtr 2 TagToRetCtr 11 BrnRet 0 RipInvalid 0 BrnFuse 0 Microcode 0
ibs_op_data2:
0000000000000002 CacheHitSt 0=M-state RmtNode 0 DataSrc 2=Local node cache
ibs_op_data3:
0000000000c60002 LdOp 0 StOp 1 DcL1TlbMiss 0 DcL2TlbMiss 0 DcL1TlbHit2M 0 DcL1TlbHit1G 0 DcL2TlbHit2M 0 DcMiss 0 DcMisAcc 0 DcWcMemAcc 0 DcUcMemAcc 0 DcLockedOp 0 DcMissNoMabAlloc 0 DcLinAddrValid 1 DcPhyAddrValid 1 DcL2TlbHit1G 0 L2Miss 0 SwPf 0 OpMemWidth 4 bytes OpDcMissOpenMemReqs 0 DcMissLat 0 TlbRefillLat 0
IbsDCLinAd:
00007f133c319ce0
IbsDCPhysAd:
0000000270485ce0
Committer notes:
Fixed up this:
util/amd-sample-raw.c: In function ‘evlist__amd_sample_raw’:
util/amd-sample-raw.c:125:42: error: ‘ bytes’ directive output may be truncated writing 6 bytes into a region of size between 4 and 7 [-Werror=format-truncation=]
125 | " OpMemWidth %2d bytes", 1 << (reg.op_mem_width - 1));
| ^~~~~~
In file included from /usr/include/stdio.h:866,
from util/amd-sample-raw.c:7:
/usr/include/bits/stdio2.h:71:10: note: ‘__builtin___snprintf_chk’ output between 21 and 24 bytes into a destination of size 21
71 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
72 | __glibc_objsize (__s), __fmt,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
73 | __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
As that %2d won't limit the number of chars to 2, just state that 2 is
the minimal width:
$ cat printf.c
#include <stdio.h>
#include <stdlib.h>
int main(int argc, char *argv[])
{
char bf[64];
int len = snprintf(bf, sizeof(bf), "%2d", atoi(argv[1]));
printf("strlen(%s): %u\n", bf, len);
return 0;
}
$ ./printf 1
strlen( 1): 2
$ ./printf 12
strlen(12): 2
$ ./printf 123
strlen(123): 3
$ ./printf 1234
strlen(1234): 4
$ ./printf 12345
strlen(12345): 5
$ ./printf 123456
strlen(123456): 6
$
And since we probably don't want that output to be truncated, just
assume the worst case, as the compiler did, and add a few more chars to
that buffer.
Also use sizeof(var) instead of sizeof(dup-of-wanted-format-string) to
avoid bugs when changing one but not the other.
I also had to change this:
-#include <asm/amd-ibs.h>
+#include "../../arch/x86/include/asm/amd-ibs.h"
To make it build on other architectures, just like intel-pt does.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/
20210817221509.88391-4-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kim Phillips [Tue, 17 Aug 2021 22:15:08 +0000 (17:15 -0500)]
perf report: Add tools/arch/x86/include/asm/amd-ibs.h
This is a tools/-side patch for the patch that adds the original copy
of the IBS header file, in arch/x86/include/asm/.
We also add an entry to check-headers.sh, so future changes continue
to be copied.
Committer notes:
Had to add this
-#include <asm/msr-index.h>
+#include "msr-index.h"
And change the check-headers.sh entry to ignore this line when diffing
with the original kernel header.
This is needed so that we can use 'perf report' on a perf.data with IBS
data on a !x86 system, i.e. building on ARM fails without this as there
is no asm/msr-index.h there.
This was done on the next patch in this series and is done for things
like Intel PT and ARM CoreSight.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/
20210817221509.88391-3-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Fri, 10 Sep 2021 20:29:04 +0000 (13:29 -0700)]
Merge tag 'acpi-5.15-rc1-3' of git://git./linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These prevent a confusing PRMT-related message from being printed,
drop an unnecessary header file include and update the list of ACPICA
maintainers.
Specifics:
- Prevent a message about missing PRMT from being printed on systems
that do not support PRM, which are the majority now (Aubrey Li).
- Drop unnecessary header include from scan.c (Kari Argillander).
- Update the list of ACPICA maintainers after recent departure of one
of them (Rafael Wysocki)"
* tag 'acpi-5.15-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Update the list of maintainers
ACPI: PRM: Find PRMT table before parsing it
ACPI: scan: Remove unneeded header linux/nls.h
Linus Torvalds [Fri, 10 Sep 2021 20:20:47 +0000 (13:20 -0700)]
Merge tag 'pm-5.15-rc1-3' of git://git./linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These improve hybrid processors support in intel_pstate, fix an issue
in the core devices PM code, clean up the handling of dedicated wake
IRQs, update the Energy Model documentation and update MAINTAINERS.
Specifics:
- Make the HWP performance levels calibration on hybrid processors in
intel_pstate more straightforward (Rafael Wysocki).
- Prevent the PM core from leaving devices in suspend after a failing
system-wide suspend transition in some cases when driver PM flags
are used (Prasad Sodagudi).
- Drop unused function argument from the dedicated wake IRQs handling
code (Sergey Shtylyov).
- Fix up Energy Model kerneldoc comments and include them in the
Energy Model documentation (Lukasz Luba).
- Use my kernel.org address in MAINTAINERS insead of the personal one
(Rafael Wysocki)"
* tag 'pm-5.15-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
MAINTAINERS: Change Rafael's e-mail address
PM: sleep: core: Avoid setting power.must_resume to false
Documentation: power: include kernel-doc in Energy Model doc
PM: EM: fix kernel-doc comments
cpufreq: intel_pstate: hybrid: Rework HWP calibration
ACPI: CPPC: Introduce cppc_get_nominal_perf()
PM: sleep: wakeirq: drop useless parameter from dev_pm_attach_wake_irq()