OSDN Git Service
Chaitanya Kulkarni [Wed, 12 Dec 2018 23:11:40 +0000 (15:11 -0800)]
nvmet: add interface to update error-log page
This patch adds nvmet_req based interface to the nvmet-core so that
we can update the error log page. We update error log page in
the request completion path when status is not set to NVME_SC_SUCCESS.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Chaitanya Kulkarni [Wed, 12 Dec 2018 23:11:39 +0000 (15:11 -0800)]
nvmet: add error-log definitions
This patch adds necessary fields in the target data structures to
support error log page. For a target controller, we add a new error log
field to maintain the error log, at any given point we maintain error
entries equal to NVMET_ERROR_LOG_SLOTS for each controller. In the
following patch, we also update the error log page entry in the I/O
completion path so we introduce a spinlock for synchronization of the
log.
For nvmet_req, we add a new field error_loc to hold the location of
the error in the command when the actual error occurs for each request
and a starting LBA if applicable.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Chaitanya Kulkarni [Wed, 12 Dec 2018 23:11:38 +0000 (15:11 -0800)]
nvme: add error log page slot definition
This patch adds the NVMe error slot definition from the spec.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Chaitanya Kulkarni [Wed, 12 Dec 2018 23:11:37 +0000 (15:11 -0800)]
nvme: remove nvme_common command cdw10 array
This is a preparation patch which removes the nvme common command cdw10
array and replace with individual fields. This is needed for the nvmet
error log page implementation make is error log page entry offset
assignment easier.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sagi Grimberg [Thu, 13 Dec 2018 07:01:54 +0000 (23:01 -0800)]
nvmet: remove unused variable
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Jens Axboe [Wed, 12 Dec 2018 16:18:11 +0000 (09:18 -0700)]
nvme: provide fallback for discard alloc failure
When boxes are run near (or to) OOM, we have a problem with the discard
page allocation in nvme. If we fail allocating the special page, we
return busy, and it'll get retried. But since ordering is honored for
dispatch requests, we can keep retrying this same IO and failing. Behind
that IO could be requests that want to free memory, but they never get
the chance.
Allocate a fixed discard page per controller for a safe fallback, and use
that if the initial allocation fails.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Chengguang Xu [Mon, 10 Dec 2018 23:24:34 +0000 (07:24 +0800)]
nvme: add __exit annotation
Add __exit annotation to cleanup helper which is only
called once in the module.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sagi Grimberg [Tue, 4 Dec 2018 01:52:17 +0000 (17:52 -0800)]
nvme-tcp: add NVMe over TCP host driver
This patch implements the NVMe over TCP host driver. It can be used to
connect to remote NVMe over Fabrics subsystems over good old TCP/IP.
The driver implements the TP 8000 of how nvme over fabrics capsules and
data are encapsulated in nvme-tcp pdus and exchaged on top of a TCP byte
stream. nvme-tcp header and data digest are supported as well.
To connect to all NVMe over Fabrics controllers reachable on a given taget
port over TCP use the following command:
nvme connect-all -t tcp -a $IPADDR
This requires the latest version of nvme-cli with TCP support.
Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: Roy Shterman <roys@lightbitslabs.com>
Signed-off-by: Solganik Alexander <sashas@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sagi Grimberg [Tue, 4 Dec 2018 01:52:16 +0000 (17:52 -0800)]
nvmet: allow configfs tcp trtype configuration
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sagi Grimberg [Tue, 4 Dec 2018 01:52:15 +0000 (17:52 -0800)]
nvmet-tcp: add NVMe over TCP target driver
This patch implements the TCP transport driver for the NVMe over Fabrics
target stack. This allows exporting NVMe over Fabrics functionality over
good old TCP/IP.
The driver implements the TP 8000 of how nvme over fabrics capsules and
data are encapsulated in nvme-tcp pdus and exchaged on top of a TCP byte
stream. nvme-tcp header and data digest are supported as well.
Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: Roy Shterman <roys@lightbitslabs.com>
Signed-off-by: Solganik Alexander <sashas@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sagi Grimberg [Tue, 4 Dec 2018 01:52:14 +0000 (17:52 -0800)]
nvme-tcp: Add protocol header
Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sagi Grimberg [Tue, 4 Dec 2018 01:52:13 +0000 (17:52 -0800)]
nvme-fabrics: allow user passing data digest
Data digest is a nvme-tcp specific feature, but nothing prevents other
transports reusing the concept so do not associate with tcp transport
solely.
Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sagi Grimberg [Tue, 4 Dec 2018 01:52:12 +0000 (17:52 -0800)]
nvme-fabrics: allow user passing header digest
Header digest is a nvme-tcp specific feature, but nothing prevents other
transports reusing the concept so do not associate with tcp transport
solely.
Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sagi Grimberg [Tue, 4 Dec 2018 01:52:11 +0000 (17:52 -0800)]
nvmet: Add install_queue callout
nvmet-tcp will implement it to allocate queue commands which
are only known at nvmf connect time (sq size).
Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sagi Grimberg [Tue, 4 Dec 2018 01:52:10 +0000 (17:52 -0800)]
datagram: introduce skb_copy_and_hash_datagram_iter helper
Introduce a helper to copy datagram into an iovec iterator
but also update a predefined hash. This is useful for
consumers of skb_copy_datagram_iter to also support inflight
data digest without having to finish to copy and only then
traverse the iovec and calculate the digest hash.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sagi Grimberg [Tue, 4 Dec 2018 01:52:09 +0000 (17:52 -0800)]
iov_iter: introduce hash_and_copy_to_iter helper
Allow consumers that want to use iov iterator helpers and also update
a predefined hash calculation online when copying data. This is useful
when copying incoming network buffers to a local iterator and calculate
a digest on the incoming stream. nvme-tcp host driver that will be
introduced in following patches is the first consumer via
skb_copy_and_hash_datagram_iter.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sagi Grimberg [Tue, 4 Dec 2018 01:52:08 +0000 (17:52 -0800)]
datagram: consolidate datagram copy to iter helpers
skb_copy_datagram_iter and skb_copy_and_csum_datagram are essentialy
the same but with a couple of differences: The first is the copy
operation used which either a simple copy or a csum_and_copy, and the
second are the behavior on the "short copy" path where simply copy
needs to return the number of bytes successfully copied while csum_and_copy
needs to fault immediately as the checksum is partial.
Introduce __skb_datagram_iter that additionally accepts:
1. copy operation function pointer
2. private data that goes with the copy operation
3. fault_short flag to indicate the action on short copy
Suggested-by: David S. Miller <davem@davemloft.net>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sagi Grimberg [Tue, 4 Dec 2018 01:52:07 +0000 (17:52 -0800)]
iov_iter: pass void csum pointer to csum_and_copy_to_iter
The single caller to csum_and_copy_to_iter is skb_copy_and_csum_datagram
and we are trying to unite its logic with skb_copy_datagram_iter by passing
a callback to the copy function that we want to apply. Thus, we need
to make the checksum pointer private to the function.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sagi Grimberg [Tue, 4 Dec 2018 01:52:06 +0000 (17:52 -0800)]
datagram: open-code copy_page_to_iter
This will be useful to consolidate skb_copy_and_hash_datagram_iter and
skb_copy_and_csum_datagram to a single code path.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sagi Grimberg [Tue, 4 Dec 2018 01:52:05 +0000 (17:52 -0800)]
ath6kl: add ath6kl_ prefix to crypto_type
Prevent a namespace conflict as in following patches as skbuff.h will
include the crypto API.
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Dennis Zhou [Tue, 11 Dec 2018 23:03:08 +0000 (18:03 -0500)]
blkcg: handle dying request_queue when associating a blkg
Between v3 [1] and v4 [2] of the blkg association series, the
association point moved from generic_make_request_checks(), which is
called after the request enters the queue, to bio_set_dev(), which is when
the bio is formed before submit_bio(). When the request_queue goes away,
the blkgs supporting the request_queue are destroyed and then the
q->root_blkg is set to %NULL.
This patch adds a %NULL check to blkg_tryget_closest() to prevent the
NPE caused by the above. It also adds a guard to see if the
request_queue is dying when creating a blkg to prevent creating a blkg
for a dead request_queue.
[1] https://lore.kernel.org/lkml/
20180911184137.35897-1-dennisszhou@gmail.com/
[2] https://lore.kernel.org/lkml/
20181126211946.77067-1-dennis@kernel.org/
Fixes:
5cdf2e3fea5e ("blkcg: associate blkg when associating a device")
Reported-and-tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Wed, 12 Dec 2018 11:44:34 +0000 (19:44 +0800)]
block: deactivate blk_stat timer in wbt_disable_default()
rwb_enabled() can't be changed when there is any inflight IO.
wbt_disable_default() may set rwb->wb_normal as zero, however the
blk_stat timer may still be pending, and the timer function will update
wrb->wb_normal again.
This patch introduces blk_stat_deactivate() and applies it in
wbt_disable_default(), then the following IO hang triggered when running
parted & switching io scheduler can be fixed:
[ 369.937806] INFO: task parted:3645 blocked for more than 120 seconds.
[ 369.938941] Not tainted
4.20.0-rc6-00284-g906c801e5248 #498
[ 369.939797] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 369.940768] parted D 0 3645 3239 0x00000000
[ 369.941500] Call Trace:
[ 369.941874] ? __schedule+0x6d9/0x74c
[ 369.942392] ? wbt_done+0x5e/0x5e
[ 369.942864] ? wbt_cleanup_cb+0x16/0x16
[ 369.943404] ? wbt_done+0x5e/0x5e
[ 369.943874] schedule+0x67/0x78
[ 369.944298] io_schedule+0x12/0x33
[ 369.944771] rq_qos_wait+0xb5/0x119
[ 369.945193] ? karma_partition+0x1c2/0x1c2
[ 369.945691] ? wbt_cleanup_cb+0x16/0x16
[ 369.946151] wbt_wait+0x85/0xb6
[ 369.946540] __rq_qos_throttle+0x23/0x2f
[ 369.947014] blk_mq_make_request+0xe6/0x40a
[ 369.947518] generic_make_request+0x192/0x2fe
[ 369.948042] ? submit_bio+0x103/0x11f
[ 369.948486] ? __radix_tree_lookup+0x35/0xb5
[ 369.949011] submit_bio+0x103/0x11f
[ 369.949436] ? blkg_lookup_slowpath+0x25/0x44
[ 369.949962] submit_bio_wait+0x53/0x7f
[ 369.950469] blkdev_issue_flush+0x8a/0xae
[ 369.951032] blkdev_fsync+0x2f/0x3a
[ 369.951502] do_fsync+0x2e/0x47
[ 369.951887] __x64_sys_fsync+0x10/0x13
[ 369.952374] do_syscall_64+0x89/0x149
[ 369.952819] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 369.953492] RIP: 0033:0x7f95a1e729d4
[ 369.953996] Code: Bad RIP value.
[ 369.954456] RSP: 002b:
00007ffdb570dd48 EFLAGS:
00000246 ORIG_RAX:
000000000000004a
[ 369.955506] RAX:
ffffffffffffffda RBX:
000055c2139c6be0 RCX:
00007f95a1e729d4
[ 369.956389] RDX:
0000000000000001 RSI:
0000000000001261 RDI:
0000000000000004
[ 369.957325] RBP:
0000000000000002 R08:
0000000000000000 R09:
000055c2139c6ce0
[ 369.958199] R10:
0000000000000000 R11:
0000000000000246 R12:
000055c2139c0380
[ 369.959143] R13:
0000000000000004 R14:
0000000000000100 R15:
0000000000000008
Cc: stable@vger.kernel.org
Cc: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Wed, 12 Dec 2018 01:39:41 +0000 (18:39 -0700)]
sbitmap: flush deferred clears for resize and shallow gets
We're missing a deferred clear off the shallow get, which can cause
a hang. Additionally, when we resize the sbitmap, we should also
flush deferred clears for good measure.
Ensure we have full coverage on batch clears, even for paths where
we would not be doing deferred clear. This makes it less error
prone for future additions.
Reported-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Igor Konopko [Tue, 11 Dec 2018 19:16:27 +0000 (20:16 +0100)]
lightnvm: pblk: do not overwrite ppa list with meta list
Ehen using pblk with 0 sized metadata both ppa list and meta list
points to the same memory since pblk_dma_meta_size() returns 0 in
that case.
This patch fix that issue by ensuring that pblk_dma_meta_size()
always returns space equal to sizeof(struct pblk_sec_meta) and thus
ppa list and meta list points to different memory address.
Even that in that case drive does not really care about meta_list
pointer, this is the easiest way to fix that issue without introducing
changes in many places in the code just for 0 sized metadata case.
The same approach needs to be also done for pblk_get_sec_meta()
since we also cannot point to the same memory address in meta buffer
when we are using it for pblk recovery process
Reported-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Tested-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Igor Konopko [Tue, 11 Dec 2018 19:16:26 +0000 (20:16 +0100)]
lightnvm: pblk: support packed metadata
pblk performs recovery of open lines by storing the LBA in the per LBA
metadata field. Recovery therefore only works for drives that has this
field.
This patch adds support for packed metadata, which store l2p mapping
for open lines in last sector of every write unit and enables drives
without per IO metadata to recover open lines.
After this patch, drives with OOB size <16B will use packed metadata
and metadata size larger than16B will continue to use the device per
IO metadata.
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Igor Konopko [Tue, 11 Dec 2018 19:16:25 +0000 (20:16 +0100)]
lightnvm: disable interleaved metadata
Currently pblk only check the size of I/O metadata and does not take
into account if this metadata is in a separate buffer or interleaved
in a single metadata buffer.
In reality only the first scenario is supported, where second mode will
break pblk functionality during any IO operation.
This patch prevents pblk to be instantiated in case device only
supports interleaved metadata.
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Igor Konopko [Tue, 11 Dec 2018 19:16:24 +0000 (20:16 +0100)]
lightnvm: dynamic DMA pool entry size
Currently lightnvm and pblk uses single DMA pool, for which the entry
size always is equal to PAGE_SIZE. The contents of each entry allocated
from the DMA pool consists of a PPA list (8bytes * 64), leaving
56bytes * 64 space for metadata. Since the metadata field can be bigger,
such as 128 bytes, the static size does not cover this use-case.
This patch adds support for I/O metadata above 56 bytes by changing DMA
pool size based on device meta size and allows pblk to use OOB metadata
>=16B.
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Igor Konopko [Tue, 11 Dec 2018 19:16:23 +0000 (20:16 +0100)]
lightnvm: pblk: add helpers for OOB metadata
pblk currently assumes that size of OOB metadata on drive is always
equal to size of pblk_sec_meta struct. This commit add helpers which will
allow to handle different sizes of OOB metadata on drive in the future.
After this patch only OOB metadata equal to 16 bytes is supported.
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Igor Konopko [Tue, 11 Dec 2018 19:16:22 +0000 (20:16 +0100)]
lightnvm: pblk: move lba list to partial read context
Currently DMA allocated memory is reused on partial read
for lba_list_mem and lba_list_media arrays. In preparation
for dynamic DMA pool sizes we need to move this arrays
into pblk_pr_ctx structures.
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Javier González [Tue, 11 Dec 2018 19:16:21 +0000 (20:16 +0100)]
lightnvm: pblk: avoid ref warning on cache creation
The current kref implementation around pblk global caches triggers a
false positive on refcount_inc_checked() (when called) as the kref is
initialized to 0. Instead of usint kref_inc() on a 0 reference, which is
in principle correct, use kref_init() to avoid the check. This is also
more explicit about what actually happens on cache creation.
In the process, do a small refactoring to use kref helpers.
Fixes:
1864de94ec9d6 "lightnvm: pblk: stop recreating global caches"
Signed-off-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Matias Bjørling [Tue, 11 Dec 2018 19:16:20 +0000 (20:16 +0100)]
lightnvm: simplify geometry enumeration
Currently the geometry of an OCSSD is enumerated using a two step
approach:
First, nvm_register is called, the OCSSD identify command is issued,
and second the geometry sos and csecs values are read either from the
OCSSD identify if it is a 1.2 drive, or from the NVMe namespace data
structure if it is a 2.0 device.
This patch recombines it into a single step, such that nvm_register can
use the csecs and sos fields independent of which version is used. This
enables one to dynamically size the lightnvm subsystem dma pool.
Reviewed-by: Igor Konopko <igor.j.konopko@intel.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Javier González [Tue, 11 Dec 2018 19:16:19 +0000 (20:16 +0100)]
lightnvm: pblk: add comments wrt locking in recovery path
pblk's recovery path is single threaded and therefore a number of
assumptions regarding concurrency can be made. To avoid confusion, make
this explicit with a couple of comments in the code.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hua Su [Tue, 11 Dec 2018 19:16:18 +0000 (20:16 +0100)]
lightnvm: pblk: add lock protection to list operations
Protect the list_add on the pblk_line_init_bb() error
path in case this code is used for some other purpose
in the future.
Signed-off-by: Hua Su <suhua.tanke@gmail.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hua Su [Tue, 11 Dec 2018 19:16:17 +0000 (20:16 +0100)]
lightnvm: pblk: fix spelling in comment
Signed-off-by: Hua Su <suhua.tanke@gmail.com>
Updated description.
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hans Holmberg [Tue, 11 Dec 2018 19:16:16 +0000 (20:16 +0100)]
lightnvm: pblk: remove dead code in pblk_recov_l2p
Remove the call to pblk_line_replace_data as it returns
directly because we have not set l_mg->data_next yet.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hans Holmberg [Tue, 11 Dec 2018 19:16:15 +0000 (20:16 +0100)]
lightnvm: pblk: fix pblk_lines_init error handling path
The chunk metadata is allocated with vmalloc, so we need to use
vfree to free it.
Fixes:
090ee26fd512 ("lightnvm: use internal allocation for chunk log page")
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hans Holmberg [Tue, 11 Dec 2018 19:16:14 +0000 (20:16 +0100)]
lightnvm: pblk: remove unused macro
ADDR_POOL_SIZE is not used anymore, so remove the macro.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hans Holmberg [Tue, 11 Dec 2018 19:16:13 +0000 (20:16 +0100)]
lightnvm: pblk: set conservative threshold for user writes
In a worst-case scenario (random writes), OP% of sectors
in each line will be invalid, and we will then need
to move data out of 100/OP% lines to free a single line.
So, to prevent the possibility of running out of lines,
temporarily block user writes when there is less than
100/OP% free lines.
Also ensure that pblk creation does not produce instances
with insufficient over provisioning.
Insufficient over-provising is not a problem on real hardware,
but often an issue when running QEMU simulations (with few lines).
100 lines is enough to create a sane instance with the standard
(11%) over provisioning.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hans Holmberg [Tue, 11 Dec 2018 19:16:12 +0000 (20:16 +0100)]
lightnvm: pblk: stop writes gracefully when running out of lines
If mapping fails (i.e. when running out of lines), handle the error
and stop writing.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hans Holmberg [Tue, 11 Dec 2018 19:16:11 +0000 (20:16 +0100)]
lightnvm: pblk: account for write error sectors in emeta
Lines inflicted with write errors lines might be recovered
if they have not been recycled after write error garbage collection.
Ensure that the emeta accounting of valid lbas is correct
for such lines to avoid recovery inconsistencies.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hans Holmberg [Tue, 11 Dec 2018 19:16:10 +0000 (20:16 +0100)]
lightnvm: pblk: fix resubmission of overwritten write err lbas
Make sure we only look up valid lba addresses on the resubmission path.
If an lba is invalidated in the write buffer, that sector will be
submitted to disk (as it is already mapped to a ppa), and that write
might fail, resulting in a crash when trying to look up the lba in the
mapping table (as the lba is marked as invalid).
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hans Holmberg [Tue, 11 Dec 2018 19:16:09 +0000 (20:16 +0100)]
lightnvm: pblk: fix chunk close trace event check
The check for chunk closes suffers from an off-by-one issue, leading
to chunk close events not being traced.
Fixes:
4c44abf43d00 ("lightnvm: pblk: add trace events for chunk states")
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Geert Uytterhoeven [Tue, 11 Dec 2018 19:16:08 +0000 (20:16 +0100)]
lightnvm: Fix uninitialized return value in nvm_get_chunk_meta()
With gcc 4.1:
drivers/lightnvm/core.c: In function ‘nvm_get_bb_meta’:
drivers/lightnvm/core.c:977: warning: ‘ret’ may be used uninitialized in this function
and
drivers/nvme/host/lightnvm.c: In function ‘nvme_nvm_get_chk_meta’:
drivers/nvme/host/lightnvm.c:580: warning: ‘ret’ may be used uninitialized in this function
Indeed, if (for the former) the number of channels or LUNs is zero, or
(for both) the passed number of chunks is zero, ret will be returned
uninitialized.
Fix this by preinitializing ret to zero.
Fixes:
aff3fb18f957de93 ("lightnvm: move bad block and chunk state logic to core")
Fixes:
a294c199455187d1 ("lightnvm: implement get log report chunk helpers")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zhoujie Wu [Tue, 11 Dec 2018 19:16:07 +0000 (20:16 +0100)]
lightnvm: pblk: ignore the smeta oob area scan
The smeta area l2p mapping is empty, and actually the
recovery procedure only need to restore data sector's l2p
mapping. So ignore the smeta oob scan.
Signed-off-by: Zhoujie Wu <zjwu@marvell.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mike Snitzer [Tue, 11 Dec 2018 14:10:26 +0000 (09:10 -0500)]
dm: fix request-based dm's use of dm_wait_for_completion
The md->wait waitqueue is used by both bio-based and request-based DM.
Commit
dbd3bbd291 ("dm rq: leverage blk_mq_queue_busy() to check for
outstanding IO") lost sight of the requirement that
dm_wait_for_completion() must work with all types of DM devices.
Fix md_in_flight() to call the blk-mq or bio-based method accordingly.
Fixes:
dbd3bbd291 ("dm rq: leverage blk_mq_queue_busy() to check for outstanding IO")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Sun, 9 Dec 2018 18:21:45 +0000 (11:21 -0700)]
nvme: fix irq vs io_queue calculations
Guenter reported an boot hang issue on HPPA after we default to 0 poll
queues. We have two issues in the queue count calculations:
1) We don't separate the poll queues from the read/write queues. This is
important, since the former doesn't need interrupts.
2) The adjust logic is broken.
Adjust the poll queue count before doing nvme_calc_io_queues(). The poll
queue count is only limited by the IO queue count we were able to get
from the controller, not failures in the IRQ allocation loop. This
leaves nvme_calc_io_queues() just adjusting the read/write queue map.
Reported-by: Reported-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Mon, 10 Dec 2018 22:45:53 +0000 (15:45 -0700)]
dm: fix inflight IO check
After switching to percpu inflight counters, the inflight check
is totally buggy. It's perfectly valid for some counters to be
non-zero while having a total inflight IO count of 0, that's how
these kinds of counters work (inc on one CPU, dec on another).
Fix the md_in_flight() check to sum all counters before returning
a false positive, potentially.
While at it, remove the inflight read for IO completion. We don't
need it, just wake anyone that's waiting for the IO count to drop
to zero. The caller needs to re-check that value anyway when woken,
which it does.
Fixes:
6f75723190d8 ("dm: remove the pending IO accounting")
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Mon, 10 Dec 2018 21:45:19 +0000 (14:45 -0700)]
mtip32xx: use BLK_STS_DEV_RESOURCE for device resources
For cases where we can only fail with IO in-flight, we should be using
BLK_STS_DEV_RESOURCE instead of BLK_STS_RESOURCE. The latter refers to
system wide resource constraints.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Arnd Bergmann [Mon, 10 Dec 2018 21:34:39 +0000 (22:34 +0100)]
mtip32xx: avoid using semaphores
The "cmd_slot_unal" semaphore is never used in a blocking way
but only as an atomic counter. Change the code to using
atomic_dec_if_positive() as a better API.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mikulas Patocka [Thu, 6 Dec 2018 16:41:22 +0000 (11:41 -0500)]
dm: remove the pending IO accounting
Remove the "pending" atomic counters, that duplicate block-core's
in_flight counters, and update md_in_flight() to look at percpu
in_flight counters.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mikulas Patocka [Thu, 6 Dec 2018 16:41:21 +0000 (11:41 -0500)]
block: return just one value from part_in_flight
The previous patches deleted all the code that needed the second value
returned from part_in_flight - now the kernel only uses the first value.
Consequently, part_in_flight (and blk_mq_in_flight) may be changed so that
it only returns one value.
This patch just refactors the code, there's no functional change.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mikulas Patocka [Thu, 6 Dec 2018 16:41:20 +0000 (11:41 -0500)]
block: switch to per-cpu in-flight counters
Now when part_round_stats is gone, we can switch to per-cpu in-flight
counters.
We use the local-atomic type local_t, so that if part_inc_in_flight or
part_dec_in_flight is reentrantly called from an interrupt, the value will
be correct.
The other counters could be corrupted due to reentrant interrupt, but the
corruption only results in slight counter skew - the in_flight counter
must be exact, so it needs local_t.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mikulas Patocka [Thu, 6 Dec 2018 16:41:19 +0000 (11:41 -0500)]
block: delete part_round_stats and switch to less precise counting
We want to convert to per-cpu in_flight counters.
The function part_round_stats needs the in_flight counter every jiffy, it
would be too costly to sum all the percpu variables every jiffy, so it
must be deleted. part_round_stats is used to calculate two counters -
time_in_queue and io_ticks.
time_in_queue can be calculated without part_round_stats, by adding the
duration of the I/O when the I/O ends (the value is almost as exact as the
previously calculated value, except that time for in-progress I/Os is not
counted).
io_ticks can be approximated by increasing the value when I/O is started
or ended and the jiffies value has changed. If the I/Os take less than a
jiffy, the value is as exact as the previously calculated value. If the
I/Os take more than a jiffy, io_ticks can drift behind the previously
calculated value.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mike Snitzer [Thu, 6 Dec 2018 16:41:18 +0000 (11:41 -0500)]
block: stop passing 'cpu' to all percpu stats methods
All of part_stat_* and related methods are used with preempt disabled,
so there is no need to pass cpu around to allow of them. Just call
smp_processor_id() as needed.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mike Snitzer [Thu, 6 Dec 2018 16:41:17 +0000 (11:41 -0500)]
dm rq: leverage blk_mq_queue_busy() to check for outstanding IO
Now that request-based dm-multipath only supports blk-mq, make use of
the newly introduced blk_mq_queue_busy() to check for outstanding IO --
rather than (ab)using the block core's in_flight counters.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mikulas Patocka [Thu, 6 Dec 2018 16:41:16 +0000 (11:41 -0500)]
dm: dont rewrite dm_disk(md)->part0.in_flight
generic_start_io_acct and generic_end_io_acct already update the variable
in_flight using atomic operations, so we don't have to overwrite them
again.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Mon, 10 Dec 2018 00:45:40 +0000 (17:45 -0700)]
Merge tag 'v4.20-rc6' into for-4.21/block
Pull in v4.20-rc6 to resolve the conflict in NVMe, but also to get the
two corruption fixes. We're going to be overhauling the direct dispatch
path, and we need to do that on top of the changes we made for that
in mainline.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Mon, 10 Dec 2018 00:43:20 +0000 (17:43 -0700)]
sbitmap: silence bogus lockdep IRQ warning
Ming reports that lockdep spews the following trace. What this
essentially says is that the sbitmap swap_lock was used inconsistently
in IRQ enabled and disabled context, and that is usually indicative of a
bug that will cause a deadlock.
For this case, it's a false positive. The swap_lock is used from process
context only, when we swap the bits in the word and cleared mask. We
also end up doing that when we are getting a driver tag, from the
blk_mq_mark_tag_wait(), and from there we hold the waitqueue lock with
IRQs disabled. However, this isn't from an actual IRQ, it's still
process context.
In lieu of a better way to fix this, simply always disable interrupts
when grabbing the swap_lock if lockdep is enabled.
[ 100.967642] ================start test sanity/001================
[ 101.238280] null: module loaded
[ 106.093735]
[ 106.094012] =====================================================
[ 106.094854] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
[ 106.095759] 4.20.0-rc3_5d2ee7122c73_for-next+ #1 Not tainted
[ 106.096551] -----------------------------------------------------
[ 106.097386] fio/1043 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[ 106.098231]
000000004c43fa71
(&(&sb->map[i].swap_lock)->rlock){+.+.}, at: sbitmap_get+0xd5/0x22c
[ 106.099431]
[ 106.099431] and this task is already holding:
[ 106.100229]
000000007eec8b2f
(&(&hctx->dispatch_wait_lock)->rlock){....}, at:
blk_mq_dispatch_rq_list+0x4c1/0xd7c
[ 106.101630] which would create a new lock dependency:
[ 106.102326] (&(&hctx->dispatch_wait_lock)->rlock){....} ->
(&(&sb->map[i].swap_lock)->rlock){+.+.}
[ 106.103553]
[ 106.103553] but this new dependency connects a SOFTIRQ-irq-safe lock:
[ 106.104580] (&sbq->ws[i].wait){..-.}
[ 106.104582]
[ 106.104582] ... which became SOFTIRQ-irq-safe at:
[ 106.105751] _raw_spin_lock_irqsave+0x4b/0x82
[ 106.106284] __wake_up_common_lock+0x119/0x1b9
[ 106.106825] sbitmap_queue_wake_up+0x33f/0x383
[ 106.107456] sbitmap_queue_clear+0x4c/0x9a
[ 106.108046] __blk_mq_free_request+0x188/0x1d3
[ 106.108581] blk_mq_free_request+0x23b/0x26b
[ 106.109102] scsi_end_request+0x345/0x5d7
[ 106.109587] scsi_io_completion+0x4b5/0x8f0
[ 106.110099] scsi_finish_command+0x412/0x456
[ 106.110615] scsi_softirq_done+0x23f/0x29b
[ 106.111115] blk_done_softirq+0x2a7/0x2e6
[ 106.111608] __do_softirq+0x360/0x6ad
[ 106.112062] run_ksoftirqd+0x2f/0x5b
[ 106.112499] smpboot_thread_fn+0x3a5/0x3db
[ 106.113000] kthread+0x1d4/0x1e4
[ 106.113457] ret_from_fork+0x3a/0x50
[ 106.113969]
[ 106.113969] to a SOFTIRQ-irq-unsafe lock:
[ 106.114672] (&(&sb->map[i].swap_lock)->rlock){+.+.}
[ 106.114674]
[ 106.114674] ... which became SOFTIRQ-irq-unsafe at:
[ 106.116000] ...
[ 106.116003] _raw_spin_lock+0x33/0x64
[ 106.116676] sbitmap_get+0xd5/0x22c
[ 106.117134] __sbitmap_queue_get+0xe8/0x177
[ 106.117731] __blk_mq_get_tag+0x1e6/0x22d
[ 106.118286] blk_mq_get_tag+0x1db/0x6e4
[ 106.118756] blk_mq_get_driver_tag+0x161/0x258
[ 106.119383] blk_mq_dispatch_rq_list+0x28e/0xd7c
[ 106.120043] blk_mq_do_dispatch_sched+0x23a/0x287
[ 106.120607] blk_mq_sched_dispatch_requests+0x379/0x3fc
[ 106.121234] __blk_mq_run_hw_queue+0x137/0x17e
[ 106.121781] __blk_mq_delay_run_hw_queue+0x80/0x25f
[ 106.122366] blk_mq_run_hw_queue+0x151/0x187
[ 106.122887] blk_mq_sched_insert_requests+0x13f/0x175
[ 106.123492] blk_mq_flush_plug_list+0x7d6/0x81b
[ 106.124042] blk_flush_plug_list+0x392/0x3d7
[ 106.124557] blk_finish_plug+0x37/0x4f
[ 106.125019] read_pages+0x3ef/0x430
[ 106.125446] __do_page_cache_readahead+0x18e/0x2fc
[ 106.126027] force_page_cache_readahead+0x121/0x133
[ 106.126621] page_cache_sync_readahead+0x35f/0x3bb
[ 106.127229] generic_file_buffered_read+0x410/0x1860
[ 106.127932] __vfs_read+0x319/0x38f
[ 106.128415] vfs_read+0xd2/0x19a
[ 106.128817] ksys_read+0xb9/0x135
[ 106.129225] do_syscall_64+0x140/0x385
[ 106.129684] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 106.130292]
[ 106.130292] other info that might help us debug this:
[ 106.130292]
[ 106.131226] Chain exists of:
[ 106.131226] &sbq->ws[i].wait -->
&(&hctx->dispatch_wait_lock)->rlock -->
&(&sb->map[i].swap_lock)->rlock
[ 106.131226]
[ 106.132865] Possible interrupt unsafe locking scenario:
[ 106.132865]
[ 106.133659] CPU0 CPU1
[ 106.134194] ---- ----
[ 106.134733] lock(&(&sb->map[i].swap_lock)->rlock);
[ 106.135318] local_irq_disable();
[ 106.136014] lock(&sbq->ws[i].wait);
[ 106.136747]
lock(&(&hctx->dispatch_wait_lock)->rlock);
[ 106.137742] <Interrupt>
[ 106.138110] lock(&sbq->ws[i].wait);
[ 106.138625]
[ 106.138625] *** DEADLOCK ***
[ 106.138625]
[ 106.139430] 3 locks held by fio/1043:
[ 106.139947] #0:
0000000076ff0fd9 (rcu_read_lock){....}, at:
hctx_lock+0x29/0xe8
[ 106.140813] #1:
000000002feb1016 (&sbq->ws[i].wait){..-.}, at:
blk_mq_dispatch_rq_list+0x4ad/0xd7c
[ 106.141877] #2:
000000007eec8b2f
(&(&hctx->dispatch_wait_lock)->rlock){....}, at:
blk_mq_dispatch_rq_list+0x4c1/0xd7c
[ 106.143267]
[ 106.143267] the dependencies between SOFTIRQ-irq-safe lock and the
holding lock:
[ 106.144351] -> (&sbq->ws[i].wait){..-.} ops: 82 {
[ 106.144926] IN-SOFTIRQ-W at:
[ 106.145314] _raw_spin_lock_irqsave+0x4b/0x82
[ 106.146042] __wake_up_common_lock+0x119/0x1b9
[ 106.146785] sbitmap_queue_wake_up+0x33f/0x383
[ 106.147567] sbitmap_queue_clear+0x4c/0x9a
[ 106.148379] __blk_mq_free_request+0x188/0x1d3
[ 106.149148] blk_mq_free_request+0x23b/0x26b
[ 106.149864] scsi_end_request+0x345/0x5d7
[ 106.150546] scsi_io_completion+0x4b5/0x8f0
[ 106.151367] scsi_finish_command+0x412/0x456
[ 106.152157] scsi_softirq_done+0x23f/0x29b
[ 106.152855] blk_done_softirq+0x2a7/0x2e6
[ 106.153537] __do_softirq+0x360/0x6ad
[ 106.154280] run_ksoftirqd+0x2f/0x5b
[ 106.155020] smpboot_thread_fn+0x3a5/0x3db
[ 106.155828] kthread+0x1d4/0x1e4
[ 106.156526] ret_from_fork+0x3a/0x50
[ 106.157267] INITIAL USE at:
[ 106.157713] _raw_spin_lock_irqsave+0x4b/0x82
[ 106.158542] prepare_to_wait_exclusive+0xa8/0x215
[ 106.159421] blk_mq_get_tag+0x34f/0x6e4
[ 106.160186] blk_mq_get_request+0x48e/0xaef
[ 106.160997] blk_mq_make_request+0x27e/0xbd2
[ 106.161828] generic_make_request+0x4d1/0x873
[ 106.162661] submit_bio+0x20c/0x253
[ 106.163379] mpage_bio_submit+0x44/0x4b
[ 106.164142] mpage_readpages+0x3c2/0x407
[ 106.164919] read_pages+0x13a/0x430
[ 106.165633] __do_page_cache_readahead+0x18e/0x2fc
[ 106.166530] force_page_cache_readahead+0x121/0x133
[ 106.167439] page_cache_sync_readahead+0x35f/0x3bb
[ 106.168337] generic_file_buffered_read+0x410/0x1860
[ 106.169255] __vfs_read+0x319/0x38f
[ 106.169977] vfs_read+0xd2/0x19a
[ 106.170662] ksys_read+0xb9/0x135
[ 106.171356] do_syscall_64+0x140/0x385
[ 106.172120] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 106.173051] }
[ 106.173308] ... key at: [<
ffffffff85094600>] __key.26481+0x0/0x40
[ 106.174219] ... acquired at:
[ 106.174646] _raw_spin_lock+0x33/0x64
[ 106.175183] blk_mq_dispatch_rq_list+0x4c1/0xd7c
[ 106.175843] blk_mq_do_dispatch_sched+0x23a/0x287
[ 106.176518] blk_mq_sched_dispatch_requests+0x379/0x3fc
[ 106.177262] __blk_mq_run_hw_queue+0x137/0x17e
[ 106.177900] __blk_mq_delay_run_hw_queue+0x80/0x25f
[ 106.178591] blk_mq_run_hw_queue+0x151/0x187
[ 106.179207] blk_mq_sched_insert_requests+0x13f/0x175
[ 106.179926] blk_mq_flush_plug_list+0x7d6/0x81b
[ 106.180571] blk_flush_plug_list+0x392/0x3d7
[ 106.181187] blk_finish_plug+0x37/0x4f
[ 106.181737] __se_sys_io_submit+0x171/0x304
[ 106.182346] do_syscall_64+0x140/0x385
[ 106.182895] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 106.183607]
[ 106.183830] -> (&(&hctx->dispatch_wait_lock)->rlock){....} ops: 1 {
[ 106.184691] INITIAL USE at:
[ 106.185119] _raw_spin_lock+0x33/0x64
[ 106.185838] blk_mq_dispatch_rq_list+0x4c1/0xd7c
[ 106.186697] blk_mq_do_dispatch_sched+0x23a/0x287
[ 106.187551] blk_mq_sched_dispatch_requests+0x379/0x3fc
[ 106.188481] __blk_mq_run_hw_queue+0x137/0x17e
[ 106.189307] __blk_mq_delay_run_hw_queue+0x80/0x25f
[ 106.190189] blk_mq_run_hw_queue+0x151/0x187
[ 106.190989] blk_mq_sched_insert_requests+0x13f/0x175
[ 106.191902] blk_mq_flush_plug_list+0x7d6/0x81b
[ 106.192739] blk_flush_plug_list+0x392/0x3d7
[ 106.193535] blk_finish_plug+0x37/0x4f
[ 106.194269] __se_sys_io_submit+0x171/0x304
[ 106.195059] do_syscall_64+0x140/0x385
[ 106.195794] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 106.196705] }
[ 106.196950] ... key at: [<
ffffffff84880620>] __key.51231+0x0/0x40
[ 106.197853] ... acquired at:
[ 106.198270] lock_acquire+0x280/0x2f3
[ 106.198806] _raw_spin_lock+0x33/0x64
[ 106.199337] sbitmap_get+0xd5/0x22c
[ 106.199850] __sbitmap_queue_get+0xe8/0x177
[ 106.200450] __blk_mq_get_tag+0x1e6/0x22d
[ 106.201035] blk_mq_get_tag+0x1db/0x6e4
[ 106.201589] blk_mq_get_driver_tag+0x161/0x258
[ 106.202237] blk_mq_dispatch_rq_list+0x5b9/0xd7c
[ 106.202902] blk_mq_do_dispatch_sched+0x23a/0x287
[ 106.203572] blk_mq_sched_dispatch_requests+0x379/0x3fc
[ 106.204316] __blk_mq_run_hw_queue+0x137/0x17e
[ 106.204956] __blk_mq_delay_run_hw_queue+0x80/0x25f
[ 106.205649] blk_mq_run_hw_queue+0x151/0x187
[ 106.206269] blk_mq_sched_insert_requests+0x13f/0x175
[ 106.206997] blk_mq_flush_plug_list+0x7d6/0x81b
[ 106.207644] blk_flush_plug_list+0x392/0x3d7
[ 106.208264] blk_finish_plug+0x37/0x4f
[ 106.208814] __se_sys_io_submit+0x171/0x304
[ 106.209415] do_syscall_64+0x140/0x385
[ 106.209965] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 106.210684]
[ 106.210904]
[ 106.210904] the dependencies between the lock to be acquired
[ 106.210905] and SOFTIRQ-irq-unsafe lock:
[ 106.212541] -> (&(&sb->map[i].swap_lock)->rlock){+.+.} ops: 1969 {
[ 106.213393] HARDIRQ-ON-W at:
[ 106.213840] _raw_spin_lock+0x33/0x64
[ 106.214570] sbitmap_get+0xd5/0x22c
[ 106.215282] __sbitmap_queue_get+0xe8/0x177
[ 106.216086] __blk_mq_get_tag+0x1e6/0x22d
[ 106.216876] blk_mq_get_tag+0x1db/0x6e4
[ 106.217627] blk_mq_get_driver_tag+0x161/0x258
[ 106.218465] blk_mq_dispatch_rq_list+0x28e/0xd7c
[ 106.219326] blk_mq_do_dispatch_sched+0x23a/0x287
[ 106.220198] blk_mq_sched_dispatch_requests+0x379/0x3fc
[ 106.221138] __blk_mq_run_hw_queue+0x137/0x17e
[ 106.221975] __blk_mq_delay_run_hw_queue+0x80/0x25f
[ 106.222874] blk_mq_run_hw_queue+0x151/0x187
[ 106.223686] blk_mq_sched_insert_requests+0x13f/0x175
[ 106.224597] blk_mq_flush_plug_list+0x7d6/0x81b
[ 106.225444] blk_flush_plug_list+0x392/0x3d7
[ 106.226255] blk_finish_plug+0x37/0x4f
[ 106.227006] read_pages+0x3ef/0x430
[ 106.227717] __do_page_cache_readahead+0x18e/0x2fc
[ 106.228595] force_page_cache_readahead+0x121/0x133
[ 106.229491] page_cache_sync_readahead+0x35f/0x3bb
[ 106.230373] generic_file_buffered_read+0x410/0x1860
[ 106.231277] __vfs_read+0x319/0x38f
[ 106.231986] vfs_read+0xd2/0x19a
[ 106.232666] ksys_read+0xb9/0x135
[ 106.233350] do_syscall_64+0x140/0x385
[ 106.234097] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 106.235012] SOFTIRQ-ON-W at:
[ 106.235460] _raw_spin_lock+0x33/0x64
[ 106.236195] sbitmap_get+0xd5/0x22c
[ 106.236913] __sbitmap_queue_get+0xe8/0x177
[ 106.237715] __blk_mq_get_tag+0x1e6/0x22d
[ 106.238488] blk_mq_get_tag+0x1db/0x6e4
[ 106.239244] blk_mq_get_driver_tag+0x161/0x258
[ 106.240079] blk_mq_dispatch_rq_list+0x28e/0xd7c
[ 106.240937] blk_mq_do_dispatch_sched+0x23a/0x287
[ 106.241806] blk_mq_sched_dispatch_requests+0x379/0x3fc
[ 106.242751] __blk_mq_run_hw_queue+0x137/0x17e
[ 106.243579] __blk_mq_delay_run_hw_queue+0x80/0x25f
[ 106.244469] blk_mq_run_hw_queue+0x151/0x187
[ 106.245277] blk_mq_sched_insert_requests+0x13f/0x175
[ 106.246191] blk_mq_flush_plug_list+0x7d6/0x81b
[ 106.247044] blk_flush_plug_list+0x392/0x3d7
[ 106.247859] blk_finish_plug+0x37/0x4f
[ 106.248749] read_pages+0x3ef/0x430
[ 106.249463] __do_page_cache_readahead+0x18e/0x2fc
[ 106.250357] force_page_cache_readahead+0x121/0x133
[ 106.251263] page_cache_sync_readahead+0x35f/0x3bb
[ 106.252157] generic_file_buffered_read+0x410/0x1860
[ 106.253084] __vfs_read+0x319/0x38f
[ 106.253808] vfs_read+0xd2/0x19a
[ 106.254488] ksys_read+0xb9/0x135
[ 106.255186] do_syscall_64+0x140/0x385
[ 106.255943] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 106.256867] INITIAL USE at:
[ 106.257300] _raw_spin_lock+0x33/0x64
[ 106.258033] sbitmap_get+0xd5/0x22c
[ 106.258747] __sbitmap_queue_get+0xe8/0x177
[ 106.259542] __blk_mq_get_tag+0x1e6/0x22d
[ 106.260320] blk_mq_get_tag+0x1db/0x6e4
[ 106.261072] blk_mq_get_driver_tag+0x161/0x258
[ 106.261902] blk_mq_dispatch_rq_list+0x28e/0xd7c
[ 106.262762] blk_mq_do_dispatch_sched+0x23a/0x287
[ 106.263626] blk_mq_sched_dispatch_requests+0x379/0x3fc
[ 106.264571] __blk_mq_run_hw_queue+0x137/0x17e
[ 106.265409] __blk_mq_delay_run_hw_queue+0x80/0x25f
[ 106.266302] blk_mq_run_hw_queue+0x151/0x187
[ 106.267111] blk_mq_sched_insert_requests+0x13f/0x175
[ 106.268028] blk_mq_flush_plug_list+0x7d6/0x81b
[ 106.268878] blk_flush_plug_list+0x392/0x3d7
[ 106.269694] blk_finish_plug+0x37/0x4f
[ 106.270432] read_pages+0x3ef/0x430
[ 106.271139] __do_page_cache_readahead+0x18e/0x2fc
[ 106.272040] force_page_cache_readahead+0x121/0x133
[ 106.272932] page_cache_sync_readahead+0x35f/0x3bb
[ 106.273811] generic_file_buffered_read+0x410/0x1860
[ 106.274709] __vfs_read+0x319/0x38f
[ 106.275407] vfs_read+0xd2/0x19a
[ 106.276074] ksys_read+0xb9/0x135
[ 106.276764] do_syscall_64+0x140/0x385
[ 106.277500] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 106.278417] }
[ 106.278676] ... key at: [<
ffffffff85094640>] __key.26212+0x0/0x40
[ 106.279586] ... acquired at:
[ 106.280026] lock_acquire+0x280/0x2f3
[ 106.280559] _raw_spin_lock+0x33/0x64
[ 106.281101] sbitmap_get+0xd5/0x22c
[ 106.281610] __sbitmap_queue_get+0xe8/0x177
[ 106.282221] __blk_mq_get_tag+0x1e6/0x22d
[ 106.282809] blk_mq_get_tag+0x1db/0x6e4
[ 106.283368] blk_mq_get_driver_tag+0x161/0x258
[ 106.284018] blk_mq_dispatch_rq_list+0x5b9/0xd7c
[ 106.284685] blk_mq_do_dispatch_sched+0x23a/0x287
[ 106.285371] blk_mq_sched_dispatch_requests+0x379/0x3fc
[ 106.286135] __blk_mq_run_hw_queue+0x137/0x17e
[ 106.286806] __blk_mq_delay_run_hw_queue+0x80/0x25f
[ 106.287515] blk_mq_run_hw_queue+0x151/0x187
[ 106.288149] blk_mq_sched_insert_requests+0x13f/0x175
[ 106.289041] blk_mq_flush_plug_list+0x7d6/0x81b
[ 106.289912] blk_flush_plug_list+0x392/0x3d7
[ 106.290590] blk_finish_plug+0x37/0x4f
[ 106.291238] __se_sys_io_submit+0x171/0x304
[ 106.291864] do_syscall_64+0x140/0x385
[ 106.292534] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Reported-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Sun, 9 Dec 2018 23:31:00 +0000 (15:31 -0800)]
Linux 4.20-rc6
Linus Torvalds [Sun, 9 Dec 2018 23:12:33 +0000 (15:12 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"A decent batch of fixes here. I'd say about half are for problems that
have existed for a while, and half are for new regressions added in
the 4.20 merge window.
1) Fix 10G SFP phy module detection in mvpp2, from Baruch Siach.
2) Revert bogus emac driver change, from Benjamin Herrenschmidt.
3) Handle BPF exported data structure with pointers when building
32-bit userland, from Daniel Borkmann.
4) Memory leak fix in act_police, from Davide Caratti.
5) Check RX checksum offload in RX descriptors properly in aquantia
driver, from Dmitry Bogdanov.
6) SKB unlink fix in various spots, from Edward Cree.
7) ndo_dflt_fdb_dump() only works with ethernet, enforce this, from
Eric Dumazet.
8) Fix FID leak in mlxsw driver, from Ido Schimmel.
9) IOTLB locking fix in vhost, from Jean-Philippe Brucker.
10) Fix SKB truesize accounting in ipv4/ipv6/netfilter frag memory
limits otherwise namespace exit can hang. From Jiri Wiesner.
11) Address block parsing length fixes in x25 from Martin Schiller.
12) IRQ and ring accounting fixes in bnxt_en, from Michael Chan.
13) For tun interfaces, only iface delete works with rtnl ops, enforce
this by disallowing add. From Nicolas Dichtel.
14) Use after free in liquidio, from Pan Bian.
15) Fix SKB use after passing to netif_receive_skb(), from Prashant
Bhole.
16) Static key accounting and other fixes in XPS from Sabrina Dubroca.
17) Partially initialized flow key passed to ip6_route_output(), from
Shmulik Ladkani.
18) Fix RTNL deadlock during reset in ibmvnic driver, from Thomas
Falcon.
19) Several small TCP fixes (off-by-one on window probe abort, NULL
deref in tail loss probe, SNMP mis-estimations) from Yuchung
Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (93 commits)
net/sched: cls_flower: Reject duplicated rules also under skip_sw
bnxt_en: Fix _bnxt_get_max_rings() for 57500 chips.
bnxt_en: Fix NQ/CP rings accounting on the new 57500 chips.
bnxt_en: Keep track of reserved IRQs.
bnxt_en: Fix CNP CoS queue regression.
net/mlx4_core: Correctly set PFC param if global pause is turned off.
Revert "net/ibm/emac: wrong bit is used for STA control"
neighbour: Avoid writing before skb->head in neigh_hh_output()
ipv6: Check available headroom in ip6_xmit() even without options
tcp: lack of available data can also cause TSO defer
ipv6: sr: properly initialize flowi6 prior passing to ip6_route_output
mlxsw: spectrum_switchdev: Fix VLAN device deletion via ioctl
mlxsw: spectrum_router: Relax GRE decap matching check
mlxsw: spectrum_switchdev: Avoid leaking FID's reference count
mlxsw: spectrum_nve: Remove easily triggerable warnings
ipv4: ipv6: netfilter: Adjust the frag mem limit when truesize changes
sctp: frag_point sanity check
tcp: fix NULL ref in tail loss probe
tcp: Do not underestimate rwnd_limited
net: use skb_list_del_init() to remove from RX sublists
...
Linus Torvalds [Sun, 9 Dec 2018 23:09:55 +0000 (15:09 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Three fixes: a boot parameter re-(re-)fix, a retpoline build artifact
fix and an LLVM workaround"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Drop implicit common-page-size linker flag
x86/build: Fix compiler support check for CONFIG_RETPOLINE
x86/boot: Clear RSDP address in boot_params for broken loaders
Linus Torvalds [Sun, 9 Dec 2018 22:21:33 +0000 (14:21 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull kprobes fixes from Ingo Molnar:
"Two kprobes fixes: a blacklist fix and an instruction patching related
corruption fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kprobes/x86: Blacklist non-attachable interrupt functions
kprobes/x86: Fix instruction patching corruption when copying more than one RIP-relative instruction
Linus Torvalds [Sun, 9 Dec 2018 22:03:56 +0000 (14:03 -0800)]
Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Two fixes: a large-system fix and an earlyprintk fix with certain
resolutions"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/earlyprintk/efi: Fix infinite loop on some screen widths
x86/efi: Allocate e820 buffer before calling efi_exit_boot_service
Or Gerlitz [Sun, 9 Dec 2018 16:10:24 +0000 (18:10 +0200)]
net/sched: cls_flower: Reject duplicated rules also under skip_sw
Currently, duplicated rules are rejected only for skip_hw or "none",
hence allowing users to push duplicates into HW for no reason.
Use the flower tables to protect for that.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reported-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 9 Dec 2018 19:46:59 +0000 (11:46 -0800)]
Merge branch 'bnxt_en-Bug-fixes'
Michael Chan says:
====================
bnxt_en: Bug fixes.
The first patch fixes a regression on CoS queue setup, introduced
recently by the 57500 new chip support patches. The rest are
fixes related to ring and resource accounting on the new 57500 chips.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sun, 9 Dec 2018 12:01:02 +0000 (07:01 -0500)]
bnxt_en: Fix _bnxt_get_max_rings() for 57500 chips.
The CP rings are accounted differently on the new 57500 chips. There
must be enough CP rings for the sum of RX and TX rings on the new
chips. The current logic may be over-estimating the RX and TX rings.
The output parameter max_cp should be the maximum NQs capped by
MSIX vectors available for networking in the context of 57500 chips.
The existing code which uses CMPL rings capped by the MSIX vectors
works most of the time but is not always correct.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sun, 9 Dec 2018 12:01:01 +0000 (07:01 -0500)]
bnxt_en: Fix NQ/CP rings accounting on the new 57500 chips.
The new 57500 chips have introduced the NQ structure in addition to
the existing CP rings in all chips. We need to introduce a new
bnxt_nq_rings_in_use(). On legacy chips, the 2 functions are the
same and one will just call the other. On the new chips, they
refer to the 2 separate ring structures. The new function is now
called to determine the resource (NQ or CP rings) associated with
MSIX that are in use.
On 57500 chips, the RDMA driver does not use the CP rings so
we don't need to do the subtraction adjustment.
Fixes:
41e8d7983752 ("bnxt_en: Modify the ring reservation functions for 57500 series chips.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sun, 9 Dec 2018 12:01:00 +0000 (07:01 -0500)]
bnxt_en: Keep track of reserved IRQs.
The new 57500 chips use 1 NQ per MSIX vector, whereas legacy chips use
1 CP ring per MSIX vector. To better unify this, add a resv_irqs
field to struct bnxt_hw_resc. On legacy chips, we initialize resv_irqs
with resv_cp_rings. On new chips, we initialize it with the allocated
MSIX resources.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sun, 9 Dec 2018 12:00:59 +0000 (07:00 -0500)]
bnxt_en: Fix CNP CoS queue regression.
Recent changes to support the 57500 devices have created this
regression. The bnxt_hwrm_queue_qportcfg() call was moved to be
called earlier before the RDMA support was determined, causing
the CoS queues configuration to be set before knowing whether RDMA
was supported or not. Fix it by moving it to the right place right
after RDMA support is determined.
Fixes:
98f04cf0f1fc ("bnxt_en: Check context memory requirements from firmware.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 9 Dec 2018 18:43:17 +0000 (10:43 -0800)]
Merge tag 'char-misc-4.20-rc6' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small driver fixes for 4.20-rc6.
There is a hyperv fix that for some reaon took forever to get into a
shape that could be applied to the tree properly, but resolves a much
reported issue. The others are some gnss patches, one a bugfix and the
two others updates to the MAINTAINERS file to properly match the gnss
files in the tree.
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
MAINTAINERS: exclude gnss from SIRFPRIMA2 regex matching
MAINTAINERS: add gnss scm tree
gnss: sirf: fix activation retry handling
Drivers: hv: vmbus: Offload the handling of channels to two workqueues
Linus Torvalds [Sun, 9 Dec 2018 18:35:33 +0000 (10:35 -0800)]
Merge tag 'staging-4.20-rc6' of git://git./linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are two staging driver bugfixes for 4.20-rc6.
One is a revert of a previously incorrect patch that was merged a
while ago, and the other resolves a possible buffer overrun that was
found by code inspection.
Both of these have been in the linux-next tree with no reported
issues"
* tag 'staging-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Revert commit
ef9209b642f "staging: rtl8723bs: Fix indenting errors and an off-by-one mistake in core/rtw_mlme_ext.c"
staging: rtl8712: Fix possible buffer overrun
Linus Torvalds [Sun, 9 Dec 2018 18:24:29 +0000 (10:24 -0800)]
Merge tag 'tty-4.20-rc6' of git://git./linux/kernel/git/gregkh/tty
Pull tty driver fixes from Greg KH:
"Here are three small tty driver fixes for 4.20-rc6
Nothing major, just some bug fixes for reported issues. Full details
are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
kgdboc: fix KASAN global-out-of-bounds bug in param_set_kgdboc_var()
tty: serial: 8250_mtk: always resume the device in probe.
tty: do not set TTY_IO_ERROR flag if console port
Linus Torvalds [Sun, 9 Dec 2018 18:18:24 +0000 (10:18 -0800)]
Merge tag 'usb-4.20-rc6' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 4.20-rc6
The "largest" here are some xhci fixes for reported issues. Also here
is a USB core fix, some quirk additions, and a usb-serial fix which
required the export of one of the tty layer's functions to prevent
code duplication. The tty maintainer agreed with this change.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Prevent U1/U2 link pm states if exit latency is too long
xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
USB: check usb_get_extra_descriptor for proper size
USB: serial: console: fix reported terminal settings
usb: quirk: add no-LPM quirk on SanDisk Ultra Flair device
USB: Fix invalid-free bug in port_over_current_notify()
usb: appledisplay: Add 27" Apple Cinema Display
Linus Torvalds [Sun, 9 Dec 2018 18:15:13 +0000 (10:15 -0800)]
Merge tag '4.20-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three small fixes: a fix for smb3 direct i/o, a fix for CIFS DFS for
stable and a minor cifs Kconfig fix"
* tag '4.20-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Avoid returning EBUSY to upper layer VFS
cifs: Fix separator when building path from dentry
cifs: In Kconfig CONFIG_CIFS_POSIX needs depends on legacy (insecure cifs)
Linus Torvalds [Sun, 9 Dec 2018 17:54:04 +0000 (09:54 -0800)]
Merge tag 'dax-fixes-4.20-rc6' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull dax fixes from Dan Williams:
"The last of the known regression fixes and fallout from the Xarray
conversion of the filesystem-dax implementation.
On the path to debugging why the dax memory-failure injection test
started failing after the Xarray conversion a couple more fixes for
the dax_lock_mapping_entry(), now called dax_lock_page(), surfaced.
Those plus the bug that started the hunt are now addressed. These
patches have appeared in a -next release with no issues reported.
Note the touches to mm/memory-failure.c are just the conversion to the
new function signature for dax_lock_page().
Summary:
- Fix the Xarray conversion of fsdax to properly handle
dax_lock_mapping_entry() in the presense of pmd entries
- Fix inode destruction racing a new lock request"
* tag 'dax-fixes-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Fix unlock mismatch with updated API
dax: Don't access a freed inode
dax: Check page->mapping isn't NULL
Linus Torvalds [Sun, 9 Dec 2018 17:46:54 +0000 (09:46 -0800)]
Merge tag 'libnvdimm-fixes-4.20-rc6' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A regression fix for the Address Range Scrub implementation, yes
another one, and support for platforms that misalign persistent memory
relative to the Linux memory hotplug section constraint. Longer term,
support for sub-section memory hotplug would alleviate alignment
waste, but until then this hack allows a 'struct page' memmap to be
established for these misaligned memory regions.
These have all appeared in a -next release, and thanks to Patrick for
reporting and testing the alignment padding fix.
Summary:
- Unless and until the core mm handles memory hotplug units smaller
than a section (128M), persistent memory namespaces must be padded
to section alignment.
The libnvdimm core already handled section collision with "System
RAM", but some configurations overlap independent "Persistent
Memory" ranges within a section, so additional padding injection is
added for that case.
- The recent reworks of the ARS (address range scrub) state machine
to reduce the number of state flags inadvertantly missed a
conversion of acpi_nfit_ars_rescan() call sites. Fix the regression
whereby user-requested ARS results in a "short" scrub rather than a
"long" scrub.
- Fixup the unit tests to handle / test the 128M section alignment of
mocked test resources.
* tag 'libnvdimm-fixes-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
acpi/nfit: Fix user-initiated ARS to be "ARS-long" rather than "ARS-short"
libnvdimm, pfn: Pad pfn namespaces relative to other regions
tools/testing/nvdimm: Align test resources to 128M
Tarick Bedeir [Fri, 7 Dec 2018 08:30:26 +0000 (00:30 -0800)]
net/mlx4_core: Correctly set PFC param if global pause is turned off.
rx_ppp and tx_ppp can be set between 0 and 255, so don't clamp to 1.
Fixes:
6e8814ceb7e8 ("net/mlx4_en: Fix mixed PFC and Global pause user control requests")
Signed-off-by: Tarick Bedeir <tarick@google.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 9 Dec 2018 01:45:20 +0000 (17:45 -0800)]
Merge branch 'fixes' of git://git./linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal SoC fixes from Eduardo Valentin:
"Fixes for armada and broadcom thermal drivers"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal: broadcom: constify thermal_zone_of_device_ops structure
thermal: armada: constify thermal_zone_of_device_ops structure
thermal: bcm2835: Switch to SPDX identifier
thermal: armada: fix legacy resource fixup
thermal: armada: fix legacy validity test sense
Linus Torvalds [Sat, 8 Dec 2018 19:44:04 +0000 (11:44 -0800)]
Merge tag 'asm-generic-4.20' of git://git./linux/kernel/git/arnd/asm-generic
Pull asm-generic fix from Arnd Bergmann:
"Multiple people reported a bug I introduced in asm-generic/unistd.h in
4.20, this is the obvious bugfix to get glibc and others to correctly
build again on new architectures that no longer provide the old
fstatat64() family of system calls"
* tag 'asm-generic-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: unistd.h: fixup broken macro include.
Linus Torvalds [Sat, 8 Dec 2018 19:33:26 +0000 (11:33 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few clk driver fixes this time:
- Introduce protected-clock DT binding to fix breakage on qcom
sdm845-mtp boards where the qspi clks introduced this merge window
cause the firmware on those boards to take down the system if we
try to read the clk registers
- Fix a couple off-by-one errors found by Dan Carpenter
- Handle failure in zynq fixed factor clk driver to avoid using
uninitialized data"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: zynqmp: Off by one in zynqmp_is_valid_clock()
clk: mmp: Off by one in mmp_clk_add()
clk: mvebu: Off by one bugs in cp110_of_clk_get()
arm64: dts: qcom: sdm845-mtp: Mark protected gcc clocks
clk: qcom: Support 'protected-clocks' property
dt-bindings: clk: Introduce 'protected-clocks' property
clk: zynqmp: handle fixed factor param query error
Linus Torvalds [Sat, 8 Dec 2018 19:25:02 +0000 (11:25 -0800)]
Merge tag 'xfs-4.20-fixes-3' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Here are hopefully the last set of fixes for 4.20.
There's a fix for a longstanding statfs reporting problem with project
quotas, a correction for page cache invalidation behaviors when
fallocating near EOF, and a fix for a broken metadata verifier return
code.
Finally, the most important fix is to the pipe splicing code (aka the
generic copy_file_range fallback) to avoid pointless short directio
reads by only asking the filesystem for as much data as there are
available pages in the pipe buffer. Our previous fix (simulated short
directio reads because the number of pages didn't match the length of
the read requested) caused subtle problems on overlayfs, so that part
is reverted.
Anyhow, this series passes fstests -g all on xfs and overlay+xfs, and
has passed 17 billion fsx operations problem-free since I started
testing
Summary:
- Fix broken project quota inode counts
- Fix incorrect PAGE_MASK/PAGE_SIZE usage
- Fix incorrect return value in btree verifier
- Fix WARN_ON remap flags false positive
- Fix splice read overflows"
* tag 'xfs-4.20-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: partially revert
4721a601099 (simulated directio short read on EFAULT)
splice: don't read more than available pipe space
vfs: allow some remap flags to be passed to vfs_clone_file_range
xfs: fix inverted return from xfs_btree_sblock_verify_crc
xfs: fix PAGE_MASK usage in xfs_free_file_space
fs/xfs: fix f_ffree value for statfs when project quota is set
David Rientjes [Fri, 7 Dec 2018 22:50:16 +0000 (14:50 -0800)]
Revert "mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask"
This reverts commit
89c83fb539f95491be80cdd5158e6f0ce329e317.
This should have been done as part of
2f0799a0ffc0 ("mm, thp: restore
node-local hugepage allocations"). The movement of the thp allocation
policy from alloc_pages_vma() to alloc_hugepage_direct_gfpmask() was
intended to only set __GFP_THISNODE for mempolicies that are not
MPOL_BIND whereas the revert could set this regardless of mempolicy.
While the check for MPOL_BIND between alloc_hugepage_direct_gfpmask()
and alloc_pages_vma() was racy, that has since been removed since the
revert. What is left is the possibility to use __GFP_THISNODE in
policy_node() when it is unexpected because the special handling for
hugepages in alloc_pages_vma() was removed as part of the consolidation.
Secondly, prior to
89c83fb539f9, alloc_pages_vma() implemented a somewhat
different policy for hugepage allocations, which were allocated through
alloc_hugepage_vma(). For hugepage allocations, if the allocating
process's node is in the set of allowed nodes, allocate with
__GFP_THISNODE for that node (for MPOL_PREFERRED, use that node with
__GFP_THISNODE instead). This was changed for shmem_alloc_hugepage() to
allow fallback to other nodes in
89c83fb539f9 as it did for new_page() in
mm/mempolicy.c which is functionally different behavior and removes the
requirement to only allocate hugepages locally.
So this commit does a full revert of
89c83fb539f9 instead of the partial
revert that was done in
2f0799a0ffc0. The result is the same thp
allocation policy for 4.20 that was in 4.19.
Fixes:
89c83fb539f9 ("mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask")
Fixes:
2f0799a0ffc0 ("mm, thp: restore node-local hugepage allocations")
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Benjamin Herrenschmidt [Fri, 7 Dec 2018 04:05:04 +0000 (15:05 +1100)]
Revert "net/ibm/emac: wrong bit is used for STA control"
This reverts commit
624ca9c33c8a853a4a589836e310d776620f4ab9.
This commit is completely bogus. The STACR register has two formats, old
and new, depending on the version of the IP block used. There's a pair of
device-tree properties that can be used to specify the format used:
has-inverted-stacr-oc
has-new-stacr-staopc
What this commit did was to change the bit definition used with the old
parts to match the new parts. This of course breaks the driver on all
the old ones.
Instead, the author should have set the appropriate properties in the
device-tree for the variant used on his board.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Sat, 8 Dec 2018 05:06:12 +0000 (22:06 -0700)]
scsi: Fix a harmless double shift bug
Smatch generates a warning:
drivers/scsi/scsi_lib.c:1656 scsi_mq_done() warn: test_bit() takes a bit number
The problem is that SCMD_STATE_COMPLETE is supposed to be bit number 0
and not a mask like "(1 << 0)". It is used like this:
if (test_and_set_bit(SCMD_STATE_COMPLETE, &scmd->state))
The test_and_set_bit() has a shift built in so it's a double left shift
and uses bit number 1 instead of number 0. This bug is harmless because
it's done consistently and it doesn't clash with any other flags.
Fixes:
f1342709d18a ("scsi: Do not rely on blk-mq for double completions")
Reviewed-by: Keith Busch <keith.busch@intel.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Israel Rukshin [Mon, 3 Dec 2018 15:50:05 +0000 (15:50 +0000)]
nvme: remove unused function nvme_ctrl_ready
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Tue, 27 Nov 2018 16:40:57 +0000 (09:40 -0700)]
nvme: implement Enhanced Command Retry
A controller may have an internal state that is not able to successfully
process commands for a short duration. In such states, an immediate
command requeue is expected to fail. The driver may exceed its max
retry count, which permanently ends the command in failure when the same
command would succeed after waiting for the controller to be ready.
NVMe ratified TP 4033 provides a delay hint in the completion status
code for failed commands. Implement the retry delay based on the command
completion status and the controller's requested delay.
Note that requeued commands are handled per request_queue, not per
individual request. If multiple commands fail, the controller should
consistently report the desired delay time for retryable commands in
all CQEs, otherwise the requeue list may be kicked too soon.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Chaitanya Kulkarni [Mon, 19 Nov 2018 23:16:39 +0000 (15:16 -0800)]
nvmet: fix the structure member indentation
This is a cleanup patch which fixes the structure member indentation
introduced by the p2p:
commit
c6925093d0b2 ("nvmet: Optionally use PCI P2P memory").
We don't change any functionality in this patch.
This is needed so that any future members will also follow the uniform
indentation.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Chaitanya Kulkarni [Mon, 19 Nov 2018 21:35:30 +0000 (13:35 -0800)]
nvmet: use unlikely for req status check
This patch adds unlikely in the nvmet request completion path for the
status check in the low level function __nvmet_req_complete.
This is helpful in the scenario where host and target connection is
working smoothly.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Israel Rukshin [Mon, 19 Nov 2018 10:58:51 +0000 (10:58 +0000)]
nvmet-rdma: Add unlikely for response allocated check
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Israel Rukshin [Mon, 19 Nov 2018 10:58:52 +0000 (10:58 +0000)]
nvme: Remove unused forward declaration
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sagi Grimberg [Mon, 19 Nov 2018 22:11:15 +0000 (14:11 -0800)]
nvme: disable fabrics SQ flow control when asked by the user
As for now, we don't care about sq_head pointer updates anyway, so
at least allow the controller to micro-optimize by omiting this update.
Note that we will probably need to support it when a controller
that requires this comes along.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sagi Grimberg [Tue, 20 Nov 2018 09:34:19 +0000 (10:34 +0100)]
nvmet: expose support for fabrics SQ flow control disable in treq
Technical Proposal introduces an indication for SQ flow control
disable support. Expose it since we are able to operate in this mode.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sagi Grimberg [Mon, 19 Nov 2018 22:11:13 +0000 (14:11 -0800)]
nvmet: don't override treq upon modification.
Only override the allowed parts of it.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
[hch: slight tweak to the NVME_TREQ_SECURE_CHANNEL_MASK definition]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sagi Grimberg [Mon, 19 Nov 2018 22:11:12 +0000 (14:11 -0800)]
nvmet: support fabrics sq flow control
Technical proposal 8005 "fabrics SQ flow control" introduces a mode
where a host and controller agree to omit sq_head pointer updates
when sending nvme completions.
In case the host indicated desire to operate in this mode (connect attribute)
the controller will return back a connect completion with sq_head value
of 0xffff as indication that it will omit sq_head pointer updates.
This mode saves us an atomic update in the I/O path.
Reviewed-by: Hannes Reinecke <hare@suse.com>
[hch: suggested better implementation]
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Wed, 14 Nov 2018 23:57:46 +0000 (15:57 -0800)]
nvmet-fc: remove the IN_ISR deferred scheduling options
All target lldd's call the cmd receive and op completions in non-isr
thread contexts. As such the IN_ISR options are not necessary.
Remove the functionality and flags, which also removes cpu assignments
to queues.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Wed, 14 Nov 2018 15:46:23 +0000 (16:46 +0100)]
nvmet: mark nvmet_genctr static
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jay Sternberg [Mon, 12 Nov 2018 21:56:40 +0000 (13:56 -0800)]
nvmet: enable Discovery Controller AENs
Add functions to find connections requesting Discovery Change events
and send a notification to hosts that maintain an explicit persistent
connection and have and active Asynchronous Event Request pending.
Only Hosts that have access to the Subsystem effected by the change
will receive notifications of Discovery Change event.
Call these functions each time there is a configfs change that effects
the Discover Log Pages.
Set the OAES field in the Identify Controller response to advertise the
support for Asynchronous Event Notifications.
Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Reviewed-by: Phil Cayton <phil.cayton@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sagi Grimberg [Mon, 12 Nov 2018 21:56:39 +0000 (13:56 -0800)]
nvmet: allow host connect even if no allowed subsystems are exported
It is perfectly valid that a host connects to a discovery subsystem
and gets an empty discovery log page since no subsystems are
provisioned to it. No reason to disallow connecting to the discovery
subsystem all together.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jay Sternberg <jay.e.sternberg@intel.com>
Reviewed-by: Phil Cayton <phil.cayton@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jay Sternberg [Mon, 12 Nov 2018 21:56:38 +0000 (13:56 -0800)]
nvmet: add support to Discovery controllers for commands
Add custom get/set features to commands allowed by Discovery controllers.
Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jay Sternberg [Mon, 12 Nov 2018 21:56:37 +0000 (13:56 -0800)]
nvmet: add defines for discovery change async events
Add AEN/AER values as defined by the specification
Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>