OSDN Git Service
Tobin C. Harding [Mon, 13 Mar 2017 22:54:05 +0000 (09:54 +1100)]
staging: ks7010: move comparison to right hand side
Checkpatch emits WARNING: Comparisons should place the constant on the
right side of the test.
Move constant to right hand side of test, modify operator to ensure
logic is maintained.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 Mar 2017 22:54:04 +0000 (09:54 +1100)]
staging: ks7010: remove multiple assignment
Checkpatch emits CHECK: multiple assignments should be avoided.
Move multiple assignment onto separate lines. Fix comment to use more
natural English.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 Mar 2017 22:54:03 +0000 (09:54 +1100)]
staging: ks7010: remove dead code
Checkpatch emits CHECK: Alignment should match open parenthesis. This
is due to commented out code.
Remove commented out (dead) code.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 Mar 2017 22:54:02 +0000 (09:54 +1100)]
staging: ks7010: fix logical line continuation
Checkpatch emits CHECK: Logical continuations should be on the
previous line.
Move logical continuation to previous line.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 Mar 2017 22:54:00 +0000 (09:54 +1100)]
staging: ks7010: fix checkpatch BLOCK_COMMENT_STYLE
Checkpatch emits block comments warnings.
Change comments blocks to be inline with kernel coding style for
networking code.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 Mar 2017 22:53:59 +0000 (09:53 +1100)]
staging: ks7010: fix checkpatch SPACING
Checkpatch emits over 100 instances of CHECK: No space is necessary
after a cast.
Remove unnecessary space.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 Mar 2017 23:46:42 +0000 (10:46 +1100)]
staging: ks7010: fix spelling of Michael MIC
Driver mixes spelling michael and michel in symbol names and
comments. Michael here references the IEEE 802.11i Message Integrity
Code. It is incorrect to spell it michel and confusing having two
spellings for the same thing.
Change michel -> micheal in both symbol names and comments.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Mon, 13 Mar 2017 13:25:01 +0000 (18:55 +0530)]
staging: rtl8192u: ieee80211: Remove code in comments
Commenting out code is a bad idea.
As comments are for explaining what code is about.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Mon, 13 Mar 2017 18:20:28 +0000 (18:20 +0000)]
staging: atomisp: fix missing break in switch statement
I believe there is a missing break in the switch statement for
case V4L2_CID_FOCUS_STATUS as the current fall-through looks
suspect to me.
Detected by CoverityScan, CID#
1416580 ("Missing break in switch")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Mon, 13 Mar 2017 17:55:12 +0000 (17:55 +0000)]
staging/atomisp: remove redundant null check on frame
There is no need to perform a null check on frame as there is an earlier
null check check and return hence making the null check redundant.
Remove it.
Detected by CoverityScan, CID#
1416563 ("Logically Dead Code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Mon, 13 Mar 2017 12:34:14 +0000 (15:34 +0300)]
staging: atomisp: potential underflow in atomisp_get_metadata_by_type()
md_type is an enum. On my tests, GCC treats it as unsigned but
according to the C standard it's an implementation dependant thing so we
should check for negatives.
Fixes:
a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Sun, 12 Mar 2017 17:10:23 +0000 (22:40 +0530)]
staging: media: Remove unused function atomisp_set_stop_timeout()
The function atomisp_set_stop_timeout on being called, simply returns
back. The function hasn't been mentioned in the TODO and doesn't have
FIXME code around. Hence, atomisp_set_stop_timeout and its calls have been
removed.
This was done using Coccinelle.
@@
identifier f;
@@
void f(...) {
-return;
}
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Varsha Rao [Sun, 12 Mar 2017 16:19:08 +0000 (21:49 +0530)]
staging: media: atomisp: Remove gc2235_init() function.
Remove gc2235_init() function definition and call, as it is used only
once in gc2235.c file. Replace the function call with return value,
__gc2235_init() function call.
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Varsha Rao [Sun, 12 Mar 2017 16:17:04 +0000 (21:47 +0530)]
staging: media: atomisp: Compress return logic into one line.
Simplify function return by merging assignment and return into a single
line. The following coccinelle script is used to fix this issue.
@@
expression e;
local idexpression ret;
@@
-ret = e;
-return ret;
+return e;
This patch also removes unnecessary declarations.
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sayli karnik [Sun, 12 Mar 2017 15:55:20 +0000 (21:25 +0530)]
staging: media: mt9m114: Use true/false instead of 1/0 for bool initialisations
Bool initializations should use true and false instead of 1 and 0.
Detected by coccinelle/misc/boolinit.cocci.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Sun, 12 Mar 2017 15:40:07 +0000 (21:10 +0530)]
staging: bcm2835-audio: fix memory leak in bcm2835_audio_open_connection()
In bcm2835_audio_open_connection(), if VCHI connection fails or
initialisation of VCHI audio instance fails vchi_instance needs to be
deallocated otherwise it will cause a memory leak.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Sun, 12 Mar 2017 15:39:49 +0000 (21:09 +0530)]
staging: bcm2835-audio: deallocate work when queue_work(...) fails
This patch de-allocates work when queue_work(..) fails in the
bcm2835-audio work functions
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Sun, 12 Mar 2017 15:39:31 +0000 (21:09 +0530)]
staging: bcm2835-audio: use conditional only for error case
* Refactor conditional to check if memory allocation has failed and
immediately return (-ENOMEM); if block for success case is removed.
* Return the error value -EBUSY when queue_work() fails.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Sun, 12 Mar 2017 15:39:14 +0000 (21:09 +0530)]
staging: bcm2835-audio: propagate PTR_ERR value instead of -EPERM
It is better to propagate PTR_ERR value instead of a hardcoded value
(-EPERM here)
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Sun, 12 Mar 2017 15:39:00 +0000 (21:09 +0530)]
staging: bcm2835-audio: replace null with error pointer value
This patch replaces NULL values returned by vc_vchi_audio_init(...) with
error pointer values:
- Return ERR_PTR(-EINVAL) when too many instances of audio
service are initialised
- Return ERR_PTR(-ENOMEM) when kzalloc fails
- RETURN ERR_PTR(-EPERM) when vchi connections fail to open
Similarly, a NULL check where vc_vchi_audio_init(...) is called is
replaced by IS_ERR(..)
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Sun, 12 Mar 2017 15:38:43 +0000 (21:08 +0530)]
staging: bcm2835-audio: Replace kmalloc with kzalloc
Replace kmalloc and memset with kzalloc.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arushi Singhal [Mon, 13 Mar 2017 20:48:49 +0000 (02:18 +0530)]
staging: sm750fb: Alignment should match open parenthesis
Fix checkpatch issues: "CHECK: Alignment should match open parenthesis".
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arushi Singhal [Mon, 13 Mar 2017 20:48:48 +0000 (02:18 +0530)]
staging: sm750fb: fixes add blank line after function/struct/union/enum declarations
This patch fixes the warnings reported by checkpatch.pl
for please use a blank line after function/struct/union/enum
declarations.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arushi Singhal [Mon, 13 Mar 2017 20:48:47 +0000 (02:18 +0530)]
staging: sm750fb: function prototype argument should have an identifier name
function prototype arguments like 'struct vb_device_info *','unsigned
long' etc. should have an identifier name.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 Mar 2017 01:37:34 +0000 (12:37 +1100)]
staging: dgnc: remove explicit cast
Function return type is 'int'. Returned variable is of type
'uint'. uint can be implicitly converted to int. Most significant bit
is not set so there is no risk in implicit conversion.
Remove unnecessary type cast.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 Mar 2017 01:37:33 +0000 (12:37 +1100)]
staging: dgnc: fix whitespace before return
Checkpatch emits CHECK: Blank lines aren't necessary before a close
brace '}'. Previous attempts were made to make uniform the error
handling in dgnc but improvements are still possible.
Undo whitespace changes that should not have been made :(. Make return
statement placement uniform throughout dgnc. Fix checkpatch
CHECK. Make whitespace changes only.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 Mar 2017 01:37:32 +0000 (12:37 +1100)]
staging: dgnc: return error code directly
In various functions a return code variable is defined at the top of
function, for example;
rc = -ENODEV;
and then the variable is returned. This makes it harder to read since
it separates the error code from the return site.
Return the error code directly instead of using a variable.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Sun, 12 Mar 2017 16:55:42 +0000 (22:25 +0530)]
staging: comedi: amplc_pci224: Convert macro GAT_CONFIG to static inline function
Convert macro GAT_CONFIG to static inline function as static inline
functions are preferred over macros. This change is possible since the
arguments at all call sites have the same type.
The uses were updated with Coccinelle:
@r1@
expression dev,reg,chan,src;
@@
-GAT_CONFIG(chan, src)
+pci224_gat_config(chan, src)
Also, the comment describing the macro has been removed.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Varsha Rao [Sun, 12 Mar 2017 15:07:30 +0000 (20:37 +0530)]
staging: comedi: Compress return logic into one line.
Simplify function return by merging assignment and return into a single
line. The following coccinelle script is used to fix this issue.
@@
expression e;
local idexpression ret;
@@
-ret = e;
-return ret;
+return e;
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Craig Inches [Sun, 12 Mar 2017 19:18:40 +0000 (19:18 +0000)]
staging: lustre shorten multiple lines over 80 char in lu_object.h
This patch adjusts lines so that they are less than 80 char.
Checkpatch.pl idenitified the issue.
Signed-off-by: Craig Inches <Craig@craiginches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elena Reshetova [Mon, 6 Mar 2017 14:21:10 +0000 (16:21 +0200)]
drivers: convert vme_user_vma_priv.refcnt from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej Billewicz [Mon, 13 Mar 2017 21:32:19 +0000 (22:32 +0100)]
Staging: android: ion: ion_dummy_driver: remove unnecessary empty line
Fix coding style issue.
Signed-off-by: Maciej Billewicz <maciej.billewicz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 Mar 2017 07:54:08 +0000 (18:54 +1100)]
staging: ks7010: add parentheses to complex macro
Checkpatch emits ERROR: Macros with complex values should be enclosed
in parentheses. Error may be fixed by adding parentheses around macro
definition, macros are simple arithmetic statement.
Add parentheses around macro definitions. Fix 24 cases of identical
error. Do commented out macros also to save the next developer from
having to add them.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 Mar 2017 07:54:07 +0000 (18:54 +1100)]
staging: ks7010: fix checkpatch whitespace warns
Checkpatch emits various warnings, errors and checks;
ERROR:TRAILING_WHITESPACE: trailing whitespace
WARNING:SPACE_BEFORE_TAB: please, no space before tabs
WARNING:SPACE_BEFORE_TAB: please, no space before tabs
ERROR:CODE_INDENT: code indent should use tabs where possible
CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis
These are all trivial whitespace fixes. Fix them all in one
patch. Change only whitespace.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 Mar 2017 06:38:22 +0000 (17:38 +1100)]
staging: ks7010: add variables key, key_index
'auth_type - 1' is used as an index into a key table. Adding a variable
appropriately named simplifies the code and adds meaning when
reading. Adding a pointer variable of type struct *kpa_key_t adds to
readability by removing the table access each time the key is used.
The key index is used to create a string so having it named adds
additional meaning when creating the string.
Declare variable 'key_index' and define it at declaration time. Declare
a pointer variable 'key' and define it to point to the correct key in
the key table.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 Mar 2017 06:38:21 +0000 (17:38 +1100)]
staging: ks7010: reduce length of comment string
Comment string is unnecessarily verbose. Checkpatch emits WARNING:
line over 80 characters.
Reduce comment string without loss of meaning.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 Mar 2017 06:38:20 +0000 (17:38 +1100)]
staging: ks7010: move quoted string onto single line
Checkpatch emits WARNING: quoted string split across lines. Line is
already over 80 characters long, adding 3 more does little to effect
line length while improving readibility.
Concatenate split string into single line.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 Mar 2017 06:38:19 +0000 (17:38 +1100)]
staging: ks7010: refactor newly separated function
Checkpatch emits various warnings and checks;
WARNING: Avoid multiple line dereference
CHECK: Alignment should match open parenthesis
WARNING: line over 80 characters
CHECK: Blank lines aren't necessary before a close brace '}'
These are all whitespace fixes.
Refactor whitespace inline with kernel coding style. Fix various
checkpatch warnings.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 Mar 2017 06:38:18 +0000 (17:38 +1100)]
staging: ks7010: fix line continuations
Checkpatch emits CHECK: Logical continuations should be on the
previous line. Also the same code section causes checkpatch to emit
WARNING: Avoid multiple line dereference.
Move logical line continuations onto the previous line. Move multiple
line dereferences onto single line.
Make these two changes in a single patch to give review a chance
to critique the final layout of the *complex* logical statement.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 Mar 2017 06:38:17 +0000 (17:38 +1100)]
staging: ks7010: reduce level of indentation
Code is deeply nested. One level of indentation may be removed by
inverting if statement conditional.
Invert conditional, return if new conditional evaluates to true.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 Mar 2017 06:38:16 +0000 (17:38 +1100)]
staging: ks7010: move WPA code to separate function
Checkpatch emits WARNING: Too many leading tabs - consider code
refactoring. Function contains 5 levels of nesting and 14 local
variables. Code can be simplified and nesting reduced by refactoring
into separate functions.
WPA code is contained and may be factored out into a separate
function. This will reduce the length and complexity of
hostif_data_indication(). At times within the WPA code errors result
in the function returning. In order to maintain this behaviour new
function should return a status integer.
Factor out WPA code into separate function. Add only code needed to
get compilation to pass, including modifying return statements. Make
no other code changes, program logic is unchanged.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Samuel Thibault [Mon, 13 Mar 2017 00:17:14 +0000 (01:17 +0100)]
speakup: Support spelling unicode characters
This supports spelling unicode characters by just passing them to
the speech synthesis in direct mode.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Samuel Thibault [Mon, 13 Mar 2017 00:17:13 +0000 (01:17 +0100)]
speakup: make get_char actually get unicode characters
9831013cbdbd3d06430a1db01d8c32d50c7d1c04 ('speakup: convert screen
reading to 16bit characters') paved the way for handling unicode
characters in speakup, but for the review mode, it missed actually
getting unicode characters from the VC. This fixes by just turning the
use_unicode parameter to 1.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Zahari Yurukov <zahari.yurukov@gmail.com>
Reviewed-by: Chris Brannon <chris@the-brannons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arushi Singhal [Mon, 13 Mar 2017 20:40:18 +0000 (02:10 +0530)]
staging: speakup: fix "Alignment match open parenthesis"
Fix checkpatch issues: "CHECK: Alignment should match open parenthesis".
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Derek Robson [Fri, 10 Feb 2017 22:28:25 +0000 (11:28 +1300)]
Staging: media: davinci_vpfe - style fix
Fixed alignment of block commenents across whole driver.
Found using checkpatch.
Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Derek Robson [Sat, 11 Feb 2017 00:42:38 +0000 (13:42 +1300)]
Staging: media: lirc - style fix
Changed permissions to octal across whole driver
Found by checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Mon, 13 Mar 2017 13:56:24 +0000 (19:26 +0530)]
staging: android: ion: Replace pr_err with dev_err
All devm functions has a device structure as the first argument which is
required by dev_{err,info,dbg} printing functions.
This patch converts pr_err to dev_err as dev_* is preferred after calls
to devm functions.
Done using coccinelle:
@r1 exists@
expression e,e1;
identifier f =~ "^devm_";
identifier g =~ "^pcim_";
identifier h =~ "^dmam_";
@@
e=\(f\|g\|h\)(e1,...);
<+...
(
- pr_info(
+ dev_info(e1,
...);
|
- pr_err(
+ dev_err(e1,
...);
|
- pr_debug(
+ dev_dbg(e1,
...);
)
...+>
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Narcisa Ana Maria Vasile [Thu, 9 Mar 2017 22:53:44 +0000 (00:53 +0200)]
staging: speakup: i18n.c: Refactor conditionals in spk_msg_set
Reduce the indentation level in spk_msg_set and remove
unnecessary return variable.
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Narcisa Ana Maria Vasile [Thu, 9 Mar 2017 22:53:23 +0000 (00:53 +0200)]
staging: speakup: i18n.c: Change return type from int to bool
The possible return values (0 or 1) for compare_specifiers
and fmt_validate represent whether a condition holds or not, so
conceptually, they are booleans.
Update documentation for these two functions.
Change type of variable 'still_comparing' from int to bool too,
inside fmt_validate, because it is intended to hold truth values
as well.
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Yashchenko [Sat, 11 Mar 2017 17:13:24 +0000 (20:13 +0300)]
staging: rtl8188eu: Fix redundant space coding style issue
Signed-off-by: Alex Yashchenko <alexhoppus111@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thibaut SAUTEREAU [Sat, 11 Mar 2017 18:27:27 +0000 (19:27 +0100)]
staging: rtl8712: fix bad indentation
Fix bad indentation as reported by checkpatch.pl script.
Signed-off-by: Thibaut SAUTEREAU <thibaut.sautereau@telecom-sudparis.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sayli karnik [Fri, 10 Mar 2017 12:29:04 +0000 (17:59 +0530)]
staging: vt6655: baseband: Add identifier name to function definition argument
The patch resolves the checkpatch warning:
WARNING: function definition argument should also have an identifier name
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Fri, 10 Mar 2017 13:07:23 +0000 (18:37 +0530)]
staging: css2400/sh_css: Remove parentheses from return arguments
The sematic patch used for this is:
@@
identifier i;
constant c;
@@
return
- (
\(i\|-i\|i(...)\|c\)
- )
;
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Fri, 10 Mar 2017 13:07:24 +0000 (18:37 +0530)]
staging: sh_css_firmware: Remove parentheses from return arguments
The sematic patch used for this is:
@@
identifier i;
constant c;
@@
return
- (
\(i\|-i\|i(...)\|c\)
- )
;
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrien Descamps [Thu, 9 Mar 2017 20:15:19 +0000 (21:15 +0100)]
Staging: wlan-ng: Fix endian error
sparse report fixed:
drivers/staging//wlan-ng//hfa384x_usb.c:3517:35: warning: restricted __be64 degrades to integer
drivers/staging//wlan-ng//hfa384x_usb.c:3517:33: warning: incorrect type in assignment (different base types)
drivers/staging//wlan-ng//hfa384x_usb.c:3517:33: expected restricted __be64 [usertype] mactime
drivers/staging//wlan-ng//hfa384x_usb.c:3517:33: got unsigned long long
Computation on the value should be done when in machine format, not in big endian format.
Signed-off-by: Adrien Descamps <adrien.descamps@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrien Descamps [Thu, 9 Mar 2017 20:15:18 +0000 (21:15 +0100)]
Staging: wlan-ng: Fix sparse warnings by using appropriate endian types
Fix some sparse warning by using correct endian types in structs and
local variables.
This patch only fix sparse warnings and do not change the logic.
Signed-off-by: Adrien Descamps <adrien.descamps@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manoj Sawai [Thu, 9 Mar 2017 19:03:18 +0000 (00:33 +0530)]
Staging: xgifb: XGI_main_26.c: non-standard C
Fixes following checkpatch warning:
"WARNING: %Lx is non-standard C, use %llx"
Signed-off-by: Manoj Sawai <mas@iitkgp.ac.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Derek Robson [Sat, 11 Mar 2017 03:01:59 +0000 (16:01 +1300)]
Staging: bcm2835: Fixed style of block comments
Fixed style of block comments across whole driver
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Fri, 10 Mar 2017 16:39:27 +0000 (22:09 +0530)]
staging: bcm2835-camera: remove anonymous field declarations
Anonymous field declarations are error prone. This patch replaces
anonymous declarations with explicit field declarations for typedef
SERVICE_CREATION_T in vchiq_mmal_init(..)
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Fri, 10 Mar 2017 16:39:11 +0000 (22:09 +0530)]
staging: bcm2835-audio: remove anonymous field declarations
Anonymous field declarations are error prone. This patch replaces
anonymous declarations with explicit field declarations for typedef
SERVICE_CREATION_T in vc_vchi_audio_init(..)
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shiva Kerdel [Sun, 12 Mar 2017 02:30:01 +0000 (03:30 +0100)]
Staging: ks7010: ks_hostif.*: Use preferred 'u32' kernel type over 'uint32_t'
Fix prefer kernel type 'u32' over 'uint32_t' checks.
Signed-off-by: Shiva Kerdel <shiva@exdev.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shiva Kerdel [Sun, 12 Mar 2017 02:30:00 +0000 (03:30 +0100)]
Staging: ks7010: ks_hostif.*: Use preferred 'u16' kernel type over 'uint16_t'
Fix prefer kernel type 'u16' over 'uint16_t' checks.
Signed-off-by: Shiva Kerdel <shiva@exdev.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shiva Kerdel [Sun, 12 Mar 2017 02:29:59 +0000 (03:29 +0100)]
Staging: ks7010: ks_*: Use preferred 'u8' kernel type over 'uint8_t'
Fix prefer kernel type 'u8' over 'uint8_t' checks.
Signed-off-by: Shiva Kerdel <shiva@exdev.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 8 Mar 2017 18:44:33 +0000 (18:44 +0000)]
staging: comedi: jr3_pci: change module description
Change the MODULE_DESCRIPTION string from the generic "Comedi low-level
driver" to the more specific "Comedi driver for JR3/PCI force sensor
board".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 8 Mar 2017 18:44:32 +0000 (18:44 +0000)]
staging: comedi: jr3_pci: fix initial range[8] max value
`jr3_pci_alloc_spriv()` initializes `spriv->range[8]` to use a maximum
value of 65536, but that will be overwritten with 65535 at a later time
by `jr3_pci_poll_subdevice()` once the "set full scales" command is
complete. The initial setting looks like a mistake. This range is only
associated with a couple of dummy channels (channels 56 and 57) to read
back the model number and serial number, so no user code should be
attempting to convert those numbers to physical units. Just change the
initial value to 65535 to match the final value.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 8 Mar 2017 18:44:31 +0000 (18:44 +0000)]
staging: comedi: jr3_pci: check PCI BAR 0 size
The various supported boards have different numbers of subdevices from 1
to 4. Each subdevice needs a block of registers in PCI BAR 0. Check
the region is large enough for the required number of subdevices.
Return an error from `jr3_pci_auto_attach()` if it is too small.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 8 Mar 2017 18:44:30 +0000 (18:44 +0000)]
staging: comedi: jr3_pci: check sizes at compile time
The driver currently checks the size of `struct jr3_sensor` is correct
when a device is attached, returning an error if it is wrong. Replace
that with a compile-time check. We don't care too much about the size
of `struct jr3_sensor` as it is embedded in the larger `struct
jr3_block` and is followed by a lot of padding. We should care more
that the size of `struct jr3_block` is correct, as it describes the
overall register layout of a block, and there is an array of such blocks
(one per subdevice). Check its size at compile-time using the
`BUILD_BUG_ON()` macro.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 8 Mar 2017 18:44:29 +0000 (18:44 +0000)]
staging: comedi: jr3_pci: omit pointless debug info
`jr3_pci_open()` outputs several debug log messages containing serial
numbers of the sensors (one per subdevice) along with a pointer to the
subdevice private data structure. The latter is of no use, so reformat
the debug log to omit it.
`jr3_pci_alloc_spriv()` outputs a debug log message containing more
useless information about the remapped base address of the board
registers, the sensor registers, and the difference between them. Get
rid of it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 8 Mar 2017 18:44:28 +0000 (18:44 +0000)]
staging: comedi: jr3_pci: use struct jr3_block instead of jr3_t
`struct jr3_t` contains a single array member `block` of member type
`struct jr3_block`. Rather than using pointers to `struct jr3_t`, just
use pointers to `struct jr3_block` instead and treat it as an array.
Replace the local variables `struct jr3_t __iomem *iobase` with `struct
jr3_block __iomem *block`. Remove the definition of `struct jr3_t` as
it is no longer needed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 8 Mar 2017 18:44:27 +0000 (18:44 +0000)]
staging: comedi: jr3_pci: separate out block type
`struct jr3_t` contains a single array member `block` of a tag-less
`struct` type. Rename the tag-less `struct` type to `struct jr3_block`
and move its definition outside of `struct jr3_t`. This will allow us
to use pointers of this type.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 8 Mar 2017 18:44:26 +0000 (18:44 +0000)]
staging: comedi: jr3_pci: rename 'channel' to 'block'
The term "channel" is overloaded in this driver. Rename the `channel`
member of `struct jr3_t` to `block` to reduce confusion. `block` is an
array of an anonymous `struct` type, with each element covering the
registers for one subdevice.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 8 Mar 2017 18:44:25 +0000 (18:44 +0000)]
staging: comedi: jr3_pci: rename data to sensor
Rename the `channel[x].data` member of `struct jr3_t` to
`channel[x].sensor` to match its type `struct jr3_sensor`. Also rename
local variable `ch0data` in `jr3_pci_show_copyright()` to `sensor0` for
consistency. It points to the `struct jr3_sensor` embedded in the
registers for "channel" 0.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 8 Mar 2017 18:44:24 +0000 (18:44 +0000)]
staging: comedi: jr3_pci: rename channel to sensor
The driver overloads the term "channel" a lot. To help reduce
confusion, rename the `channel` member of `struct
jr3_pci_subdev_private` to `sensor` as it points to a `struct
jr3_sensor`. Also rename the various function parameters and local
variables called `channel` that point to a `struct jr3_sensor` to
`sensor`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 8 Mar 2017 18:44:23 +0000 (18:44 +0000)]
staging: comedi: jr3_pci: rename struct jr3_channel to jr3_sensor
The driver overloads the term "channel" a lot. To help reduce
confusion, rename `struct jr3_channel` to `struct jr3_sensor`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Sat, 11 Mar 2017 19:32:05 +0000 (19:32 +0000)]
staging: atomisp: clean up return logic, remove redunant code
There is no need to check if ret is non-zero, remove this
redundant check and just return the error status from the call
to mt9m114_write_reg_array.
Detected by CoverityScan, CID#
1416577 ("Identical code for
different branches")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Sat, 11 Mar 2017 19:48:19 +0000 (19:48 +0000)]
staging: atomisp: remove redundant check for client being null
The previous statement checks if client is null, so the null check
when assigning dev is redundant and can be removed.
Detected by CoverityScan, CID#
1416555 ("Logically Dead Code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Fri, 10 Mar 2017 05:13:10 +0000 (10:43 +0530)]
staging: atomisp_fops: Clean up tests if NULL returned on failure
Some functions like kmalloc/kzalloc return NULL on failure.
When NULL represents failure, !x is commonly used.
This was done using Coccinelle:
@@
expression *e;
identifier l1;
@@
e = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\)(...);
...
- e == NULL
+ !e
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Fri, 10 Mar 2017 05:13:11 +0000 (10:43 +0530)]
staging: vpfe_mc_capture: Clean up tests if NULL returned on failure
Some functions like kmalloc/kzalloc return NULL on failure.
When NULL represents failure, !x is commonly used.
This was done using Coccinelle:
@@
expression *e;
identifier l1;
@@
e = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\)(...);
...
- e == NULL
+ !e
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Fri, 10 Mar 2017 05:13:12 +0000 (10:43 +0530)]
staging: lirc_zilog: Clean up tests if NULL returned on failure
Some functions like kmalloc/kzalloc return NULL on failure.
When NULL represents failure, !x is commonly used.
This was done using Coccinelle:
@@
expression *e;
identifier l1;
@@
e = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\)(...);
...
- e == NULL
+ !e
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sun, 12 Mar 2017 13:51:52 +0000 (14:51 +0100)]
staging: media: atomisp: remove '.' from pci Makefile
Remove the odd './' usage in the Makefile to make the build output a bit
more sane looking and match the normal kernel build style.
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Fri, 10 Mar 2017 11:35:17 +0000 (11:35 +0000)]
atomisp: remove FPGA defines
These are not relevant to an upstream kernel driver.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Fri, 10 Mar 2017 11:35:06 +0000 (11:35 +0000)]
atomisp: remove pdaf kernel
This is not used on either Baytrail or Cherrytrail so can simply be deleted
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Fri, 10 Mar 2017 11:34:41 +0000 (11:34 +0000)]
atomisp: tidy firmware loading code a little
The FWNAME define is never used so can be removed. The option to skip firmware
loading isn't really Cherrytrail specific so remove this and complete the
merging of the two driver versions for this file.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Fri, 10 Mar 2017 11:34:27 +0000 (11:34 +0000)]
atomisp: eliminate intel_mid_pm.h
We can do this because the only thing it is used for is identifying the
platform for power management purposes. The driver only supports Baytrail
and Cherrytrail and both of those always need the IPU to be power managed
directly not via PCI D3 states.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Fri, 10 Mar 2017 11:34:11 +0000 (11:34 +0000)]
atomisp: remove C_RUN define and code
We are not going to be building for anything but Linux so the code bracketed
by C_RUN is not used and not needed.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Fri, 10 Mar 2017 11:33:59 +0000 (11:33 +0000)]
atomisp: remove HIVECC
We are only going to be building for Linux with gcc, so we can lose bits of
material related to other build targets.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Fri, 10 Mar 2017 11:33:45 +0000 (11:33 +0000)]
atomisp: remove unused code and unify a header
KLOCWORK is never defined so we can remove the workarounds for this in the
code.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Fri, 10 Mar 2017 11:33:33 +0000 (11:33 +0000)]
atomisp: remove dead code for SSSE3
This is another define which is never used and references a header that doesn't
exist, so consider it dead. Our memcpy is pretty smart anyway.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gargi Sharma [Sat, 11 Mar 2017 14:57:20 +0000 (20:27 +0530)]
staging: rtl8192e: Remove multiple assignments
This patch removes multiple assignments by factorizing them.
This was done with Coccinelle for the if branch. For the else part
the change was done manually. Braces were also added to the
else part to remove the checkpatch warning, "braces should be
on all arms of if-else statements".
@ identifier i1,i2; constant c; @@
- i1=i2=c;
+ i1=c;
+ i2=c;
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Sat, 11 Mar 2017 17:21:00 +0000 (22:51 +0530)]
staging: rtl8192u: Remove typedef phy_ofdm_rx_status_rxsc_sgien_exintfflag
Remove typdef phy_ofdm_rx_status_rxsc_sgien_exintfflag and replace its uses
in the code.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gargi Sharma [Sat, 11 Mar 2017 20:41:37 +0000 (02:11 +0530)]
staging: lustre: Use min3 macro
Replace comparsions between three expressions using
two min macros with min3 macro. Done using Coccinelle
Script:
@@
expression e1;
expression e2;
expression e3;
@@
(
- min(min(e1, e2), e3)
+ min3(e1, e2, e3)
|
- min(e1, min(e2, e3))
+ min3(e1, e2, e3)
)
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 7 Mar 2017 09:57:04 +0000 (20:57 +1100)]
staging: dgnc: remove item from TODO list
TODO file contains task to verify and correct function return
sites. Need to check for and implement correct usage of goto's when
there is work to be done before returning.
Remove task from TODO list after already having completed audit of
directory drivers/staging/dgnc.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 7 Mar 2017 09:57:03 +0000 (20:57 +1100)]
staging: dgnc: audit goto's in dgnc_tty
TODO file requests fix up of error handling.
Audit dgnc_mgmt.c and fix all return paths to be uniform and inline
with kernel coding style.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 7 Mar 2017 09:57:02 +0000 (20:57 +1100)]
staging: dgnc: audit goto's in dgnc_mgmt
TODO file requests fix up of error handling.
Audit dgnc_mgmt.c and fix all return paths to be uniform and inline
with kernel coding style.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 7 Mar 2017 09:57:01 +0000 (20:57 +1100)]
staging: dgnc: audit goto's in dgnc_driver
TODO file requests fix up of error handling.
Audit dgnc_driver.c and fix all return paths to be uniform and inline
with kernel coding style.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Fri, 10 Mar 2017 07:41:10 +0000 (23:41 -0800)]
staging: vchi: Remove ARM64 from TODO list
ARM64 for core vchiq which is the core of vc04_services should
now be work complete. The driver compiles without any errors
or warnings, and works just as well as 32 bit mode. The
necessary compatibility wrappers for the 32 bit ioctls have been
written and merged.
Since no more ARM64 specific changes should be needed, perhaps
it's best to remove it from the TODO list.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Thu, 9 Mar 2017 19:01:36 +0000 (00:31 +0530)]
staging: bcm2835-camera: use kernel preferred style for handling errors
This patch replaces NULL error values with error pointer values.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Thu, 9 Mar 2017 19:01:20 +0000 (00:31 +0530)]
staging: bcm2835-camera: replace kmalloc with kzalloc
This patch replaces kmalloc and memset with kzalloc
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Thu, 9 Mar 2017 19:00:58 +0000 (00:30 +0530)]
staging: bcm2835-camera: add check to avoid null pointer dereference
This patch adds checks after memory allocation to avoid possible null
pointer dereferences.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Fri, 10 Mar 2017 05:08:59 +0000 (21:08 -0800)]
staging: bcm2835-camera: remove depends on ARM
Since all the arm64 specific issues have been fixed now
and the camera is working fine with a arm64 kernel, the
depends on ARM can be removed from Kconfig.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>