OSDN Git Service
Jeff King [Wed, 22 Jun 2011 01:26:31 +0000 (21:26 -0400)]
archive: implement configurable tar filters
It's common to pipe the tar output produce by "git archive"
through gzip or some other compressor. Locally, this can
easily be done by using a shell pipe. When requesting a
remote archive, though, it cannot be done through the
upload-archive interface.
This patch allows configurable tar filters, so that one
could define a "tar.gz" format that automatically pipes tar
output through gzip.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 22 Jun 2011 01:25:25 +0000 (21:25 -0400)]
archive: refactor file extension format-guessing
Git-archive will guess a format from the output filename if
no format is explicitly given. The current function just
hardcodes "zip" to the zip format, and leaves everything
else NULL (which will default to tar). Since we are about
to add user-specified formats, we need to be more flexible.
The new rule is "if a filename ends with a dot and the name
of a format, it matches that format". For the existing "tar"
and "zip" formats, this is identical to the current
behavior. For new user-specified formats, this will do what
the user expects if they name their formats appropriately.
Because we will eventually start matching arbitrary
user-specified extensions that may include dots, the strrchr
search for the final dot is not sufficient. We need to do an
actual suffix match with each extension.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 22 Jun 2011 01:24:48 +0000 (21:24 -0400)]
archive: move file extension format-guessing lower
The process for guessing an archive output format based on
the filename is something like this:
a. parse --output in cmd_archive; check the filename
against a static set of mapping heuristics (right now
it just matches ".zip" for zip files).
b. if found, stick a fake "--format=zip" at the beginning
of the arguments list (if the user did specify a
--format manually, the later option will override our
fake one)
c. if it's a remote call, ship the arguments to the remote
(including the fake), which will call write_archive on
their end
d. if it's local, ship the arguments to write_archive
locally
There are two problems:
1. The set of mappings is static and at too high a level.
The write_archive level is going to check config for
user-defined formats, some of which will specify
extensions. We need to delay lookup until those are
parsed, so we can match against them.
2. For a remote archive call, our set of mappings (or
formats) may not match the remote side's. This is OK in
practice right now, because all versions of git
understand "zip" and "tar". But as new formats are
added, there is going to be a mismatch between what the
client can do and what the remote server can do.
To fix (1), this patch refactors the location guessing to
happen at the write_archive level, instead of the
cmd_archive level. So instead of sticking a fake --format
field in the argv list, we actually pass a "name hint" down
the callchain; this hint is used at the appropriate time to
guess the format (if one hasn't been given already).
This patch leaves (2) unfixed. The name_hint is converted to
a "--format" option as before, and passed to the remote.
This means the local side's idea of how extensions map to
formats will take precedence.
Another option would be to pass the name hint to the remote
side and let the remote choose. This isn't a good idea for
two reasons:
1. There's no room in the protocol for passing that
information. We can pass a new argument, but older
versions of git on the server will choke on it.
2. Letting the remote side decide creates a silent
inconsistency in user experience. Consider the case
that the locally installed git knows about the "tar.gz"
format, but a remote server doesn't.
Running "git archive -o foo.tar.gz" will use the tar.gz
format. If we use --remote, and the local side chooses
the format, then we send "--format=tar.gz" to the
remote, which will complain about the unknown format.
But if we let the remote side choose the format, then
it will realize that it doesn't know about "tar.gz" and
output uncompressed tar without even issuing a warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 22 Jun 2011 01:24:07 +0000 (21:24 -0400)]
archive: pass archiver struct to write_archive callback
The current archivers are very static; when you are in the
write_tar_archive function, you know you are writing a tar.
However, to facilitate runtime-configurable archivers
that will share a common write function we need to tell the
function which archiver was used.
As a convenience, we also provide an opaque data pointer in
the archiver struct so that individual archivers can put
something useful there when they register themselves.
Technically they could just use the "name" field to look in
an internal map of names to data, but this is much simpler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 22 Jun 2011 01:23:33 +0000 (21:23 -0400)]
archive: refactor list of archive formats
Most of the tar and zip code was nicely split out into two
abstracted files which knew only about their specific
formats. The entry point to this code was a single "write
archive" function.
However, as these basic formats grow more complex (e.g., by
handling multiple file extensions and format names), a
static list of the entry point functions won't be enough.
Instead, let's provide a way for the tar and zip code to
tell the main archive code what they support by registering
archiver names and functions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 22 Jun 2011 01:22:20 +0000 (21:22 -0400)]
archive-tar: don't reload default config options
We load our own tar-specific config, and then chain to
git_default_config. This is pointless, as our caller should
already have loaded the default config. It also introduces a
needless inconsistency with the zip archiver, which does not
look at the config files at all (and therefore relies on the
caller to have loaded config).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 15 Jun 2011 22:31:28 +0000 (18:31 -0400)]
archive: reorder option parsing and config reading
The archive command does three things during its
initialization phase:
1. parse command-line options
2. setup the git directory
3. read config
During phase (1), if we see any options that do not require
a git directory (like "--list"), we handle them immediately
and exit, making it safe to abort step (2) if we are not in
a git directory.
Step (3) must come after step (2), since the git directory
may influence configuration. However, this leaves no
possibility of configuration from step (3) impacting the
command-line options in step (1) (which is useful, for
example, for supporting user-configurable output formats).
Instead, let's reorder this to:
1. setup the git directory, if it exists
2. read config
3. parse command-line options
4. if we are not in a git repository, die
This should have the same external behavior, but puts
configuration before command-line parsing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Thu, 9 Jun 2011 07:08:57 +0000 (02:08 -0500)]
gitweb: do not misparse nonnumeric content tag files that contain a digit
v1.7.6-rc0~27^2~4 (gitweb: Change the way "content tags" ('ctags') are
handled, 2011-04-29) tried to make gitweb's tag cloud feature more
intuitive for webmasters by checking whether the ctags/<label> under
a project's .git dir contains a number (representing the strength of
association to <label>) before treating it as one.
With that change, after putting '$feature{'ctags'}{'default'} = [1];'
in your $GITWEB_CONFIG, you could do
echo Linux >.git/ctags/linux
and gitweb would treat that as a request to tag the current repository
with the Linux tag, instead of the previous behavior of writing an
error page embedded in the projects list that triggers error messages
from Chromium and Firefox about malformed XML.
Unfortunately the pattern (\d+) used to match numbers is too loose,
and the "XML declaration allowed only at the start of the document"
error can still be experienced if you write "Linux-2.6" in place of
"Linux" in the example above. Fix it by tightening the pattern to
^\d+$.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 9 Jun 2011 01:29:48 +0000 (18:29 -0700)]
Git 1.7.6-rc1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 9 Jun 2011 01:13:39 +0000 (18:13 -0700)]
Merge branch 'maint'
* maint:
fetch: do not leak a refspec
Jim Meyering [Wed, 8 Jun 2011 20:06:33 +0000 (22:06 +0200)]
fetch: do not leak a refspec
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 7 Jun 2011 15:32:42 +0000 (08:32 -0700)]
Merge branch 'jc/magic-pathspec'
* jc/magic-pathspec:
t3703: skip more tests using colons in file names on Windows
Alex Riesen [Tue, 7 Jun 2011 09:49:44 +0000 (11:49 +0200)]
t3703: skip more tests using colons in file names on Windows
Use the same test and prerequisite as introduced in similar
fix in
650af7ae8bdf92bd92df2.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 6 Jun 2011 18:40:22 +0000 (11:40 -0700)]
Merge branch 'jn/mime-type-with-params'
* jn/mime-type-with-params:
gitweb: Fix usability of $prevent_xss
Junio C Hamano [Mon, 6 Jun 2011 18:40:18 +0000 (11:40 -0700)]
Merge branch 'jn/gitweb-docs'
* jn/gitweb-docs:
gitweb: Move "Requirements" up in gitweb/INSTALL
gitweb: Describe CSSMIN and JSMIN in gitweb/INSTALL
gitweb: Move information about installation from README to INSTALL
Junio C Hamano [Mon, 6 Jun 2011 18:40:14 +0000 (11:40 -0700)]
Merge branch 'jk/diff-not-so-quick'
* jk/diff-not-so-quick:
diff: futureproof "stop feeding the backend early" logic
diff_tree: disable QUICK optimization with diff filter
Conflicts:
diff.c
Junio C Hamano [Mon, 6 Jun 2011 18:40:08 +0000 (11:40 -0700)]
Merge branch 'bc/maint-status-z-to-use-porcelain'
* bc/maint-status-z-to-use-porcelain:
builtin/commit.c: set status_format _after_ option parsing
t7508: demonstrate status's failure to use --porcelain format with -z
Conflicts:
builtin/commit.c
Jakub Narebski [Sat, 4 Jun 2011 08:43:35 +0000 (10:43 +0200)]
gitweb: Fix usability of $prevent_xss
With XSS prevention on (enabled using $prevent_xss), blobs
('blob_plain') of all types except a few known safe ones are served
with "Content-Disposition: attachment". However the check was too
strict; it didn't take into account optional parameter attributes,
media-type = type "/" subtype *( ";" parameter )
as described in RFC 2616
http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.17
http://www.w3.org/Protocols/rfc2616/rfc2616-sec3.html#sec3.7
This fixes that, and it for example treats following as safe MIME
media type:
text/plain; charset=utf-8
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Fri, 3 Jun 2011 16:31:48 +0000 (18:31 +0200)]
gitweb: Move "Requirements" up in gitweb/INSTALL
This way you can examine prerequisites at first glance, before
detailed instructions on installing gitweb. Straightforward
text movement.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Thu, 2 Jun 2011 14:55:53 +0000 (16:55 +0200)]
gitweb: Describe CSSMIN and JSMIN in gitweb/INSTALL
The build-time configuration variables JSMIN and CSSMIN were mentioned
only in Makefile; add their description to gitweb/INSTALL.
This required moving description of GITWEB_JS up, near GITWEB_CSS and
just introduced CSMIN and JSMIN.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Thu, 2 Jun 2011 14:55:52 +0000 (16:55 +0200)]
gitweb: Move information about installation from README to INSTALL
Almost straightformard moving of "How to configure gitweb for your
local system" section from gitweb/README to gitweb/INSTALL, as it is
about build time configuration. Updated references to it.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 1 Jun 2011 21:11:17 +0000 (14:11 -0700)]
Sync with 1.7.5.4
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 1 Jun 2011 21:08:26 +0000 (14:08 -0700)]
Git 1.7.5.4
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 1 Jun 2011 21:05:22 +0000 (14:05 -0700)]
Merge branch 'jk/maint-config-alias-fix' into maint
* jk/maint-config-alias-fix:
handle_options(): do not miscount how many arguments were used
config: always parse GIT_CONFIG_PARAMETERS during git_config
git_config: don't peek at global config_parameters
config: make environment parsing routines static
Junio C Hamano [Wed, 1 Jun 2011 21:03:07 +0000 (14:03 -0700)]
Merge branch 'jc/fmt-req-fix' into maint
* jc/fmt-req-fix:
userformat_find_requirements(): find requirement for the correct format
Junio C Hamano [Wed, 1 Jun 2011 21:02:52 +0000 (14:02 -0700)]
Merge branch 'jk/maint-docs' into maint
* jk/maint-docs:
docs: fix some antique example output
docs: make sure literal "->" isn't converted to arrow
docs: update status --porcelain format
docs: minor grammar fixes to git-status
Junio C Hamano [Wed, 1 Jun 2011 21:02:45 +0000 (14:02 -0700)]
Merge branch 'jn/doc-remote-helpers' into maint
* jn/doc-remote-helpers:
Documentation: do not misinterpret refspecs as bold text
Junio C Hamano [Wed, 1 Jun 2011 21:02:39 +0000 (14:02 -0700)]
Merge branch 'kk/maint-prefix-in-config-mak' into maint
* kk/maint-prefix-in-config-mak:
config.mak.in: allow "configure --sysconfdir=/else/where"
Jim Meyering [Fri, 29 Apr 2011 09:42:41 +0000 (11:42 +0200)]
diffcore-rename.c: avoid set-but-not-used warning
Since
9d8a5a5 (diffcore-rename: refactor "too many candidates" logic,
2011-01-06), diffcore_rename() initializes num_src but does not use it
anymore. "-Wunused-but-set-variable" in gcc-4.6 complains about this.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 31 May 2011 19:22:50 +0000 (12:22 -0700)]
Update draft release notes to 1.7.6
I think we are almost there for the feature freeze.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 31 May 2011 19:19:11 +0000 (12:19 -0700)]
Merge branch 'jk/format-patch-am'
* jk/format-patch-am:
format-patch: preserve subject newlines with -k
clean up calling conventions for pretty.c functions
pretty: add pp_commit_easy function for simple callers
mailinfo: always clean up rfc822 header folding
t: test subject handling in format-patch / am pipeline
Conflicts:
builtin/branch.c
builtin/log.c
commit.h
Junio C Hamano [Tue, 31 May 2011 19:09:35 +0000 (12:09 -0700)]
Merge branch 'jn/doc-remote-helpers'
* jn/doc-remote-helpers:
Documentation: do not misinterpret refspecs as bold text
Junio C Hamano [Tue, 31 May 2011 19:09:27 +0000 (12:09 -0700)]
Merge branch 'jk/format-patch-empty-prefix'
* jk/format-patch-empty-prefix:
format-patch: make zero-length subject prefixes prettier
Junio C Hamano [Tue, 31 May 2011 19:09:21 +0000 (12:09 -0700)]
Merge branch 'ab/i18n-envsubst-doc-fix'
* ab/i18n-envsubst-doc-fix:
git-sh-i18n--envsubst: add SYNOPSIS section to the documentation
Junio C Hamano [Tue, 31 May 2011 19:09:18 +0000 (12:09 -0700)]
Merge branch 'jc/log-quiet-fix'
* jc/log-quiet-fix:
log: --quiet should serve as synonym to -s
Junio C Hamano [Tue, 31 May 2011 19:09:12 +0000 (12:09 -0700)]
Merge branch 'kk/maint-prefix-in-config-mak'
* kk/maint-prefix-in-config-mak:
config.mak.in: allow "configure --sysconfdir=/else/where"
Junio C Hamano [Tue, 31 May 2011 19:09:08 +0000 (12:09 -0700)]
Merge branch 'jk/rebase-head-reflog'
* jk/rebase-head-reflog:
rebase: write a reflog entry when finishing
rebase: create HEAD reflog entry when aborting
Junio C Hamano [Tue, 31 May 2011 19:09:00 +0000 (12:09 -0700)]
Merge branch 'jk/maint-docs'
* jk/maint-docs:
docs: fix some antique example output
docs: make sure literal "->" isn't converted to arrow
docs: update status --porcelain format
docs: minor grammar fixes to git-status
Junio C Hamano [Tue, 31 May 2011 19:08:55 +0000 (12:08 -0700)]
Merge branch 'jk/read-in-full-stops-on-error'
* jk/read-in-full-stops-on-error:
read_in_full: always report errors
Junio C Hamano [Tue, 31 May 2011 19:08:52 +0000 (12:08 -0700)]
Merge branch 'jk/maint-remote-mirror-safer'
* jk/maint-remote-mirror-safer:
remote: allow "-t" with fetch mirrors
Junio C Hamano [Tue, 31 May 2011 19:08:48 +0000 (12:08 -0700)]
Merge branch 'jl/read-tree-m-dry-run'
* jl/read-tree-m-dry-run:
Teach read-tree the -n|--dry-run option
unpack-trees: add the dry_run flag to unpack_trees_options
Junio C Hamano [Tue, 31 May 2011 19:07:14 +0000 (12:07 -0700)]
Sync with maint
Junio C Hamano [Tue, 31 May 2011 19:06:40 +0000 (12:06 -0700)]
Start 1.7.5.4 draft release notes
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 31 May 2011 19:02:04 +0000 (12:02 -0700)]
Merge branch 'tr/add-i-no-escape' into maint
* tr/add-i-no-escape:
add -i: ignore terminal escape sequences
Junio C Hamano [Tue, 31 May 2011 19:01:06 +0000 (12:01 -0700)]
Merge branch 'vh/config-interactive-singlekey-doc' into maint
* vh/config-interactive-singlekey-doc:
git-reset.txt: better docs for '--patch'
git-checkout.txt: better docs for '--patch'
git-stash.txt: better docs for '--patch'
git-add.txt: document 'interactive.singlekey'
config.txt: 'interactive.singlekey; is used by...
Junio C Hamano [Tue, 31 May 2011 19:00:43 +0000 (12:00 -0700)]
Merge branch 'ml/test-readme' into maint
* ml/test-readme:
t/README: unify documentation of test function args
Junio C Hamano [Tue, 31 May 2011 19:00:27 +0000 (12:00 -0700)]
Merge branch 'ab/i18n-fixup' into maint
* ab/i18n-fixup: (24 commits)
i18n: use test_i18n{cmp,grep} in t7600, t7607, t7611 and t7811
i18n: use test_i18n{grep,cmp} in t7508
i18n: use test_i18ngrep in t7506
i18n: use test_i18ngrep and test_i18ncmp in t7502
i18n: use test_i18ngrep in t7501
i18n: use test_i18ncmp in t7500
i18n: use test_i18ngrep in t7201
i18n: use test_i18ncmp and test_i18ngrep in t7102 and t7110
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060
i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014
i18n: use test_i18ncmp and test_i18ngrep in t3203, t3501 and t3507
i18n: use test_i18ngrep in t2020, t2204, t3030, and t3200
i18n: use test_i18ngrep in lib-httpd and t2019
i18n: do not overuse C_LOCALE_OUTPUT (grep)
i18n: use test_i18ncmp in t1200 and t2200
i18n: .git file is not a human readable message (t5601)
i18n: do not overuse C_LOCALE_OUTPUT
i18n: mark init-db messages for translation
i18n: mark checkout plural warning for translation
i18n: mark checkout --detach messages for translation
...
Junio C Hamano [Tue, 31 May 2011 19:00:02 +0000 (12:00 -0700)]
Merge branch 'jc/rename-degrade-cc-to-c' into maint
* jc/rename-degrade-cc-to-c:
diffcore-rename: fall back to -C when -C -C busts the rename limit
diffcore-rename: record filepair for rename src
diffcore-rename: refactor "too many candidates" logic
builtin/diff.c: remove duplicated call to diff_result_code()
Junio C Hamano [Tue, 31 May 2011 18:59:39 +0000 (11:59 -0700)]
Merge branch 'rr/doc-content-type' into maint
* rr/doc-content-type:
Documentation: Allow custom diff tools to be specified in 'diff.tool'
Documentation: Add diff.<driver>.* to config
Documentation: Move diff.<driver>.* from config.txt to diff-config.txt
Documentation: Add filter.<driver>.* to config
Ramsay Jones [Tue, 31 May 2011 17:23:42 +0000 (18:23 +0100)]
config.c: Remove unused git_config_global() function
Commit
8f323c00 (drop support for GIT_CONFIG_NOGLOBAL, 15-03-2011)
removed the git_config_global() function, among other things, since
it is no longer required. Unfortunately, this function has since
been unintentionally restored by a faulty conflict resolution.
Remove it.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 31 May 2011 16:14:17 +0000 (09:14 -0700)]
diff: futureproof "stop feeding the backend early" logic
Refactor the "do not stop feeding the backend early" logic into a small
helper function and use it in both run_diff_files() and diff_tree() that
has the stop-early optimization. We may later add other types of diffcore
transformation that require to look at the whole result like diff-filter
does, and having the logic in a single place is essential for longer term
maintainability.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 31 May 2011 15:33:56 +0000 (11:33 -0400)]
diff_tree: disable QUICK optimization with diff filter
We stop looking for changes early with QUICK, so our diff
queue contains only a subset of the changes. However, we
don't apply diff filters until later; it will appear at that
point as though there are no changes matching our filter,
when in reality we simply didn't keep looking for changes
long enough.
Commit
2cfe8a6 (diff --quiet: disable optimization when
--diff-filter=X is used, 2011-03-16) fixes this in some
cases by disabling the optimization when a filter is
present. However, it only tweaked run_diff_files, missing
the similar case in diff_tree. Thus the fix worked only for
diffing the working tree and index, but not between trees.
Noticed by Yasushi SHOJI.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 31 May 2011 03:19:21 +0000 (20:19 -0700)]
Merge branch 'jc/fmt-req-fix'
* jc/fmt-req-fix:
userformat_find_requirements(): find requirement for the correct format
Junio C Hamano [Tue, 31 May 2011 03:19:14 +0000 (20:19 -0700)]
Merge branch 'jk/maint-config-alias-fix'
* jk/maint-config-alias-fix:
handle_options(): do not miscount how many arguments were used
config: always parse GIT_CONFIG_PARAMETERS during git_config
git_config: don't peek at global config_parameters
config: make environment parsing routines static
Conflicts:
config.c
Jonathan Nieder [Mon, 30 May 2011 15:52:56 +0000 (10:52 -0500)]
Documentation: do not misinterpret refspecs as bold text
In v1.7.3.3~2 (Documentation: do not misinterpret pull refspec as bold
text, 2010-12-03) many uses of asterisks in expressions like
"refs/heads/*:refs/svn/origin/branches/*" were escaped as {asterisk}
to avoid being treated as delimiters for bold text, but these two were
missed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 30 May 2011 14:19:05 +0000 (10:19 -0400)]
format-patch: make zero-length subject prefixes prettier
If you give a zero-length subject prefix to format-patch
(e.g., "format-patch --subject-prefix="), we will print the
ugly:
Subject: [ 1/2] your subject here
because we always insert a space between the prefix and
numbering. Requiring the user to provide the space in their
prefix would be more flexible, but would break existing
usage. This patch provides a DWIM and suppresses the space
for zero-length prefixes, under the assumption that nobody
actually wants "[ 1/2]".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ævar Arnfjörð Bjarmason [Sun, 29 May 2011 11:00:35 +0000 (11:00 +0000)]
git-sh-i18n--envsubst: add SYNOPSIS section to the documentation
Change the documentation for the git-sh-i18n--envsubst program to
include a SYNOPSIS section. Include the invocation of the program from
git-sh-i18n.sh.
Not having a SYNOPSIS section caused the "doc" target to fail on
Centos 5.5 with asciidoc 8.2.5, while building with 8.6.4 on Debian
works just fine.
The relevant error was:
ERROR: git-sh-i18n--envsubst.txt: line 9: second section must be named SYNOPSIS
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 30 May 2011 07:09:55 +0000 (00:09 -0700)]
Merge branch 'maint'
* maint:
git-submodule.sh: separate parens by a space to avoid confusing some shells
Documentation/technical/api-diff.txt: correct name of diff_unmerge()
read_gitfile_gently: use ssize_t to hold read result
remove tests of always-false condition
rerere.c: diagnose a corrupt MERGE_RR when hitting EOF between TAB and '\0'
Junio C Hamano [Mon, 30 May 2011 07:09:41 +0000 (00:09 -0700)]
Merge branch 'jm/maint-misc-fix' into maint
* jm/maint-misc-fix:
read_gitfile_gently: use ssize_t to hold read result
remove tests of always-false condition
rerere.c: diagnose a corrupt MERGE_RR when hitting EOF between TAB and '\0'
Junio C Hamano [Mon, 30 May 2011 07:09:36 +0000 (00:09 -0700)]
Merge branch 'bc/maint-submodule-fix-parked' into maint
* bc/maint-submodule-fix-parked:
git-submodule.sh: separate parens by a space to avoid confusing some shells
Junio C Hamano [Mon, 30 May 2011 07:03:52 +0000 (00:03 -0700)]
Merge branch 'bc/maint-api-doc-parked' into maint
* bc/maint-api-doc-parked:
Documentation/technical/api-diff.txt: correct name of diff_unmerge()
Junio C Hamano [Mon, 30 May 2011 07:00:07 +0000 (00:00 -0700)]
Merge branch 'mk/grep-pcre'
* mk/grep-pcre:
git-grep: Fix problems with recently added tests
git-grep: Update tests (mainly for -P)
Makefile: Pass USE_LIBPCRE down in GIT-BUILD-OPTIONS
git-grep: update tests now regexp type is "last one wins"
git-grep: do not die upon -F/-P when grep.extendedRegexp is set.
git-grep: Bail out when -P is used with -F or -E
grep: Add basic tests
configure: Check for libpcre
git-grep: Learn PCRE
grep: Extract compile_regexp_failed() from compile_regexp()
grep: Fix a typo in a comment
grep: Put calls to fixmatch() and regmatch() into patmatch()
contrib/completion: --line-number to git grep
Documentation: Add --line-number to git-grep synopsis
Michał Kiedrowicz [Thu, 26 May 2011 22:43:59 +0000 (00:43 +0200)]
git-grep: Fix problems with recently added tests
Brian Gernhardt reported that test 'git grep -E -F -G a\\+b' fails on
OS X 10.6.7. This is because I assumed \+ is part of BRE, which isn't
true on all platforms.
The easiest way to make this test pass is to just update expected
output, but that would make the test pointless. Its real purpose is to
check whether 'git grep -E -F -G' is different from 'git grep -E -G -F'.
To check that, let's change pattern to "a+b*c". This should return
different match for -G, -F and -E.
I also made two small tweaks to the tests. First, I added path "ab" to
all calls to future-proof tests. Second, I updated last two tests to
better show that 'git grep -P -E' is different from 'git grep -E -P'.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 30 May 2011 06:51:26 +0000 (23:51 -0700)]
Merge branch 'jc/notes-batch-removal'
* jc/notes-batch-removal:
show: --ignore-missing
notes remove: --stdin reads from the standard input
notes remove: --ignore-missing
notes remove: allow removing more than one
Junio C Hamano [Mon, 30 May 2011 06:51:22 +0000 (23:51 -0700)]
Merge branch 'jk/haves-from-alternate-odb'
* jk/haves-from-alternate-odb:
receive-pack: eliminate duplicate .have refs
bisect: refactor sha1_array into a generic sha1 list
refactor refs_from_alternate_cb to allow passing extra data
Junio C Hamano [Mon, 30 May 2011 02:08:51 +0000 (19:08 -0700)]
Merge branch 'jn/run-command-error-failure' into maint
* jn/run-command-error-failure:
run-command: handle short writes and EINTR in die_child
tests: check error message from run_command
Brandon Casey [Thu, 26 May 2011 20:43:21 +0000 (13:43 -0700)]
builtin/commit.c: set status_format _after_ option parsing
'git status' should use --porcelain output format when -z is given.
It was not doing so since the _effect_ of using -z, namely that
null_termination would be set, was being checked _before_ option parsing
was performed.
So, move the check so that it is performed after option parsing.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 26 May 2011 20:43:20 +0000 (13:43 -0700)]
t7508: demonstrate status's failure to use --porcelain format with -z
When 'git status' is supplied the -z switch, and no output format has been
selected, it is supposed to use the --porcelain format. This does not
happen. Instead, the standard long format is used. Add a test to
demonstrate this failure.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 28 May 2011 19:25:24 +0000 (12:25 -0700)]
log: --quiet should serve as synonym to -s
The previous commit simply hijacked --quiet and essentially made it into a
no-op. Instead, take it as a cue that the end user wants to omit the patch
output from commands that default to show patches, e.g. "show".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 27 May 2011 20:16:14 +0000 (16:16 -0400)]
rebase: write a reflog entry when finishing
When we finish a rebase, our detached HEAD is at the final
result. We update the original branch ref with this result,
and then point the HEAD symbolic ref at the updated branch.
We write a reflog for the branch update, but not for the
update of HEAD.
Because we're already at the final result on the detached
HEAD, moving to the branch actually doesn't change our
commit sha1 at all. So in that sense, a reflog entry would
be pointless.
However, humans do read reflogs, and an entry saying "rebase
finished: returning to refs/heads/master" can be helpful in
understanding what is going on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Csaba Henk [Fri, 27 May 2011 20:13:02 +0000 (16:13 -0400)]
rebase: create HEAD reflog entry when aborting
When we abort a rebase, we return to the original value of
HEAD. Failing to write a reflog entry means we create a
gap in the reflog (which can cause "git show
HEAD@{5.minutes.ago}" to issue a warning). Plus having the
extra entry makes the reflog easier to follow for a human.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 5 May 2011 01:50:45 +0000 (18:50 -0700)]
config.mak.in: allow "configure --sysconfdir=/else/where"
We do allow vanilla Makefile users to say make sysconfdir=/else/where
and config.mak can also be tweaked manually for the same effect. Give
the same configurablity to ./configure users as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 27 May 2011 02:33:15 +0000 (22:33 -0400)]
docs: fix some antique example output
These diff-index and diff-tree sample outputs date back to
the first month of git's existence. The output format has
changed slightly since then, so let's have it match the
current output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 27 May 2011 02:32:41 +0000 (22:32 -0400)]
docs: make sure literal "->" isn't converted to arrow
Recent versions of asciidoc will treat "->" as a
single-glyph arrow symbol, unless it is inside a literal
code block. This is a problem if we are discussing literal
output and want to show the ASCII characters.
Our usage falls into three categories:
1. Inside a code block. These can be left as-is.
2. Discussing literal output or code, but inside a
paragraph. This patch escapes these as "\->".
3. Using the arrow as a symbolic element, such as "use the
Edit->Account Settings menu". In this case, the
arrow symbol is preferable, so we leave it as-is.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 27 May 2011 02:31:51 +0000 (22:31 -0400)]
docs: update status --porcelain format
The --porcelain format was originally identical to the
--short format, but designed to be stable as the short
format changed. Since this was written, the short format
picked up a few incompatible niceties, but this description
was never changed.
Let's mention the differences. While we're at it, let's add
some sub-section headings to make the "output" section a
little easier to navigate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 27 May 2011 02:31:11 +0000 (22:31 -0400)]
docs: minor grammar fixes to git-status
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 26 May 2011 22:28:17 +0000 (18:28 -0400)]
format-patch: preserve subject newlines with -k
In older versions of git, we used rfc822 header folding to
indicate that the original subject line had multiple lines
in it. But since
a1f6baa (format-patch: wrap long header
lines, 2011-02-23), we now use header folding whenever there
is a long line.
This means that "git am" cannot trust header folding as a
sign from format-patch that newlines should be preserved.
Instead, format-patch needs to signal more explicitly that
the newlines are significant. This patch does so by
rfc2047-encoding the newlines in the subject line. No
changes are needed on the "git am" end; it already decodes
the newlines properly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 26 May 2011 22:27:49 +0000 (18:27 -0400)]
clean up calling conventions for pretty.c functions
We have a pretty_print_context representing the parameters
for a pretty-print session, but we did not use it uniformly.
As a result, functions kept growing more and more arguments.
Let's clean this up in a few ways:
1. All pretty-print pp_* functions now take a context.
This lets us reduce the number of arguments to these
functions, since we were just passing around the
context values separately.
2. The context argument now has a cmit_fmt field, which
was passed around separately. That's one less argument
per function.
3. The context argument always comes first, which makes
calling a little more uniform.
This drops lines from some callers, and adds lines in a few
places (because we need an extra line to set the context's
fmt field). Overall, we don't save many lines, but the lines
that are there are a lot simpler and more readable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 26 May 2011 22:27:24 +0000 (18:27 -0400)]
pretty: add pp_commit_easy function for simple callers
Many callers don't actually care about the pretty print
context at all; let's just give them a simple way of
pretty-printing a commit without having to create a context
struct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 26 May 2011 20:52:04 +0000 (13:52 -0700)]
git-submodule.sh: separate parens by a space to avoid confusing some shells
Some shells interpret '(( ))' according to the rules for arithmetic
expansion. This may not follow POSIX, but is prevalent in commonly used
shells. Bash does not have a problem with this particular instance of
'((', likely because it is not followed by a '))', but the public domain
ksh does, and so does ksh on IRIX 6.5.
So, add a space between the parenthesis to avoid confusing these shells.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 26 May 2011 20:46:56 +0000 (13:46 -0700)]
Documentation/technical/api-diff.txt: correct name of diff_unmerge()
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 26 May 2011 20:53:38 +0000 (16:53 -0400)]
mailinfo: always clean up rfc822 header folding
Without the "-k" option, mailinfo will convert a folded
subject header like:
Subject: this is a
subject that doesn't
fit on one line
into a single line. With "-k", however, we assumed that
these newlines were significant and represented something
that the sending side would want us to preserve.
For messages created by format-patch, this assumption was
broken by
a1f6baa (format-patch: wrap long header lines,
2011-02-23). For messages sent by arbitrary MUAs, this was
probably never a good assumption to make, as they may have
been folding subjects in accordance with rfc822's line
length recommendations all along.
This patch now joins folded lines with a single whitespace
character. This treats header folding purely as a syntactic
feature of the transport mechanism, not as something that
format-patch is trying to tell us about the original
subject.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 26 May 2011 20:41:18 +0000 (16:41 -0400)]
t: test subject handling in format-patch / am pipeline
Commit
a1f6baa (format-patch: wrap long header lines,
2011-02-23) changed format-patch's behavior with respect to
long header lines, but made no accompanying changes to the
receiving side. It was thought that "git am" would handle
these folded subjects fine, but there is a regression when
using "am -k".
Let's add a test documenting this. While we're at it, let's
give more complete test coverage to document what should be
happening in each case. We test three types of subjects:
a short one, one long enough to require wrapping, and a
multiline subject. For each, we test these three
combinations:
format-patch | am
format-patch -k | am
format-patch -k | am -k
We don't bother testing "format-patch | am -k", which is
nonsense (you will be adding in [PATCH] cruft to each
subject).
This reveals the regression above (long subjects have
linebreaks introduced via "format-patch -k | am -k"),
as well as an existing non-optimal behavior (multiline
subjects are not preserved using "-k").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 26 May 2011 16:30:27 +0000 (12:30 -0400)]
read_in_full: always report errors
The read_in_full function repeatedly calls read() to fill a
buffer. If the first read() returns an error, we notify the
caller by returning the error. However, if we read some data
and then get an error on a subsequent read, we simply return
the amount of data that we did read, and the caller is
unaware of the error.
This makes the tradeoff that seeing the partial data is more
important than the fact that an error occurred. In practice,
this is generally not the case; we care more if an error
occurred, and should throw away any partial data.
I audited the current callers. In most cases, this will make
no difference at all, as they do:
if (read_in_full(fd, buf, size) != size)
error("short read");
However, it will help in a few cases:
1. In sha1_file.c:index_stream, we would fail to notice
errors in the incoming stream.
2. When reading symbolic refs in resolve_ref, we would
fail to notice errors and potentially use a truncated
ref name.
3. In various places, we will get much better error
messages. For example, callers of safe_read would
erroneously print "the remote end hung up unexpectedly"
instead of showing the read error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 26 May 2011 15:11:00 +0000 (11:11 -0400)]
remote: allow "-t" with fetch mirrors
Commit
13fc2c1 (remote: disallow some nonsensical option
combinations, 2011-03-30) made it impossible to use "remote
add -t foo --mirror". The argument was that specifying
specific branches is useless because:
1. Push mirrors do not want a refspec at all.
2. The point of fetch mirroring is to use a broad refspec
like "refs/*", but using "-t" overrides that.
Point (1) is valid; "-t" with push mirrors is useless. But
point (2) ignored another side effect of using --mirror: it
fetches the refs directly into the refs/ namespace as they
are found upstream, instead of placing them in a
separate-remote layout.
So
13fc2c1 was overly constrictive, and disallowed
reasonable specific-branch mirroring, like:
git remote add -t heads/foo -t heads/bar --mirror=fetch
which makes the local "foo" and "bar" branches direct
mirrors of the remote, but does not fetch anything else.
This patch restores the original behavior, but only for
fetch mirrors.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 26 May 2011 16:28:44 +0000 (12:28 -0400)]
read_gitfile_gently: use ssize_t to hold read result
Otherwise, a negative error return becomes a very large read
value. We catch this in practice because we compare the
expected and actual numbers of bytes (and you are not likely
to be reading (size_t)-1 bytes), but this makes the
correctness a little more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jim Meyering [Thu, 26 May 2011 13:58:16 +0000 (15:58 +0200)]
remove tests of always-false condition
* fsck.c (fsck_error_function): Don't test obj->sha1 == 0.
It can never be true, since that sha1 member is an array.
* transport.c (set_upstreams): Likewise for ref->new_sha1.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jim Meyering [Thu, 26 May 2011 13:55:50 +0000 (15:55 +0200)]
plug a DIR buffer leak in rerere.c
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jim Meyering [Thu, 26 May 2011 13:54:18 +0000 (15:54 +0200)]
rerere.c: diagnose a corrupt MERGE_RR when hitting EOF between TAB and '\0'
If we reach EOF after the SHA1-then-TAB, yet before the NUL that
terminates each file name, we would fill the file name buffer with \255
bytes resulting from the repeatedly-failing fgetc (returns EOF/-1) and
ultimately complain about "filename too long", because no NUL was
encountered.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 26 May 2011 17:41:33 +0000 (10:41 -0700)]
Update 1.7.6 draft release notes
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 26 May 2011 17:32:25 +0000 (10:32 -0700)]
Merge branch 'jn/userdiff-perl-updates'
* jn/userdiff-perl-updates:
userdiff/perl: tighten BEGIN/END block pattern to reject here-doc delimiters
tests: make test_expect_code quieter on success
userdiff/perl: catch sub with brace on second line
userdiff/perl: match full line of POD headers
userdiff/perl: anchor "sub" and "package" patterns on the left
t4018 (funcname patterns): minor cleanups
t4018 (funcname patterns): make configuration easier to track
t4018 (funcname patterns): make .gitattributes state easier to track
Junio C Hamano [Thu, 26 May 2011 17:32:19 +0000 (10:32 -0700)]
Merge branch 'rg/no-gecos-in-pwent'
* rg/no-gecos-in-pwent:
ident: add NO_GECOS_IN_PWENT for systems without pw_gecos in struct passwd
Conflicts:
Makefile
Junio C Hamano [Thu, 26 May 2011 17:32:11 +0000 (10:32 -0700)]
Merge branch 'jk/fetch-mark-complete-optimization'
* jk/fetch-mark-complete-optimization:
fetch: avoid repeated commits in mark_complete
Junio C Hamano [Thu, 26 May 2011 17:31:57 +0000 (10:31 -0700)]
Merge branch 'jn/gitweb-js'
* jn/gitweb-js:
gitweb: Make JavaScript ability to adjust timezones configurable
gitweb.js: Add UI for selecting common timezone to display dates
gitweb: JavaScript ability to adjust time based on timezone
gitweb: Unify the way long timestamp is displayed
gitweb: Refactor generating of long dates into format_timestamp_html
gitweb.js: Provide getElementsByClassName method (if it not exists)
gitweb.js: Introduce code to handle cookies from JavaScript
gitweb.js: Extract and improve datetime handling
gitweb.js: Provide default values for padding in padLeftStr and padLeft
gitweb.js: Update and improve comments in JavaScript files
gitweb: Split JavaScript for maintability, combining on build
Junio C Hamano [Thu, 26 May 2011 17:31:53 +0000 (10:31 -0700)]
Merge branch 'jn/ctags-more'
* jn/ctags-more:
gitweb: Optional grouping of projects by category
gitweb: Modularized git_get_project_description to be more generic
gitweb: Split git_project_list_body in two functions
Junio C Hamano [Thu, 26 May 2011 17:31:47 +0000 (10:31 -0700)]
Merge branch 'jc/require-work-tree-exists'
* jc/require-work-tree-exists:
require-work-tree wants more than what its name says
Junio C Hamano [Thu, 26 May 2011 17:30:28 +0000 (10:30 -0700)]
Sync with 1.7.5.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 26 May 2011 16:45:29 +0000 (09:45 -0700)]
Git 1.7.5.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 26 May 2011 17:29:24 +0000 (10:29 -0700)]
Merge branch 'maint-1.7.4' into maint
* maint-1.7.4:
Junio C Hamano [Thu, 26 May 2011 17:28:10 +0000 (10:28 -0700)]
Merge branch 'jk/git-connection-deadlock-fix' into maint-1.7.4
* jk/git-connection-deadlock-fix:
test core.gitproxy configuration
send-pack: avoid deadlock on git:// push with failed pack-objects
connect: let callers know if connection is a socket
connect: treat generic proxy processes like ssh processes
Conflicts:
connect.c