OSDN Git Service
Xiaojie Yuan [Tue, 19 Mar 2019 06:27:04 +0000 (14:27 +0800)]
drm/amd/display: use fixed-width data type for soc bounding box struct
since it's firmware.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Li [Wed, 3 Apr 2019 21:20:49 +0000 (17:20 -0400)]
drm/amdgpu: Split gpu_info_soc_bounding_box out from amdgpu_ucode.h
DC needs to include the soc bounding box when initializing HW resources.
Including amdgpu_ucode.h directly will cause warnings, since amdgpu.h is
required to define amdgpu_device. The solution here is to split the
bounding box structs into a different header, then include it in both
amdgpu_ucode.h, and relevant DC HW resource files.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Tue, 7 May 2019 19:34:21 +0000 (14:34 -0500)]
drm/amd/display: Read soc_bounding_box from gpu_info (v2)
[WHY]
We don't want to expose sensitive ASIC information before ASIC release.
[HOW]
Encode the soc_bounding_box in the gpu_info FW (for Linux) and read it
at driver load.
v2: fix warning when CONFIG_DRM_AMD_DC_DCN2_0 is not set (Alex)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hersen wu [Tue, 21 May 2019 20:03:28 +0000 (16:03 -0400)]
drm/amd/powerplay: notify smu with active display count
when dc update clocks via smu, smu needs to know how many
displays active. this interface is for dc notify number
of active displays to smu.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hersen wu [Wed, 22 May 2019 14:57:40 +0000 (10:57 -0400)]
drm/amd/powerplay: allow dc request uclk change
when dc set mode or color format in frame buffer
change, it may request clock changes, like dispclk,
dcfclk, uclk. after smu get clock requests, smu
will make decision.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Sat, 15 Jun 2019 15:14:30 +0000 (23:14 +0800)]
drm/amdgpu: initialize THM & CLK IP registers base address
was missed before.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marek Olšák [Tue, 28 May 2019 22:13:00 +0000 (18:13 -0400)]
drm/amdgpu: fix PA_SC_FIFO_SIZE for Navi10 (v2)
Proper size is 0.
v2: squash in whitespace fixes (Ernst Sjöstrand)
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 30 May 2019 11:22:28 +0000 (19:22 +0800)]
drm/amd/powerplay: remove unsupport function set_thermal_fan_table for navi10
the PPSMC_MSG_SetFanTemperatureTarget is not support on navi10
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Xiao [Sat, 1 Jun 2019 02:35:12 +0000 (10:35 +0800)]
drm/amd/powerplay: enable BACO feature as WAR
It would hit SMU fw bug without BACO enablement when audio
driver put audio device to D3 state. Before the bug in SMU fw
get fixed, enable BACO feature as WAR.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 30 May 2019 02:28:11 +0000 (10:28 +0800)]
drm/amd/powerplay: use pp_feature_mask to control uclk(mclk) dpm enabled
the uclk dpm feature is not work well on all navi10 asic,
use pp feature mask module parameter to control it.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
tiancyin [Thu, 30 May 2019 03:04:11 +0000 (11:04 +0800)]
drm/amdgpu: add new navi10 DIDs
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
tiancyin [Mon, 20 May 2019 10:21:59 +0000 (18:21 +0800)]
drm/amd/powerplay: add ppt interface version log
Include the interface version as well.
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 4 Jun 2019 19:37:05 +0000 (14:37 -0500)]
drm/amdgpu/gfx10: update to latest golden setting
Fix UTCL1_CGTT_CLK_CTRL
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 30 May 2019 05:51:44 +0000 (00:51 -0500)]
drm/amdgpu/powerplay/vega20: use correct table index
Use the SMU_* variant so we look up the correct index.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Liu [Mon, 27 May 2019 14:49:19 +0000 (10:49 -0400)]
drm/amdgpu/VCN: enable indirect DPG SRAM mode
This is default mode for VCN2.x now
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Liu [Mon, 27 May 2019 14:46:25 +0000 (10:46 -0400)]
drm/amdgpu/VCN: implement indirect DPG SRAM mode
SRAM will be programmed by PSP
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Liu [Fri, 24 May 2019 18:07:41 +0000 (14:07 -0400)]
drm/amdgpu/VCN: add buffer for indirect SRAM usage
This will be used later for indirect SRAM mode
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Xiao [Tue, 28 May 2019 13:47:05 +0000 (21:47 +0800)]
drm/amd/powerplay: disable fw dstate when gfxoff is enabled
SMU FW has bug that it would cause hung when both fw dstate and
gfxoff are enabled at the same time.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Xiao [Tue, 28 May 2019 07:43:02 +0000 (15:43 +0800)]
drm/amd/powerplay: update smu11_driver_if_navi10.h
update the smu11_driver_if_navi10.h since navi10 smu fw
update to 42.23
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Xiao [Tue, 14 May 2019 03:31:04 +0000 (11:31 +0800)]
drm/amdgpu/psp: add new psp interface for vcn updating sram
PSP leverages the existing fw loading function for vcn updating sram.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Xiao [Tue, 14 May 2019 03:53:57 +0000 (11:53 +0800)]
drm/amdgpu/psp: convert ucode id to psp ucode id
Convert ucode id to the corresponding psp ucode id.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Xiao [Tue, 14 May 2019 03:36:33 +0000 (11:36 +0800)]
drm/amdgpu: add corresponding vcn ram ucode id
Add VCN RAM ucode id in corresponding to psp ucode id.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Xiao [Tue, 14 May 2019 03:26:52 +0000 (11:26 +0800)]
drm/amdgpu/psp: add new VCN RAM ucode id to psp
PSP supports to program vcn sram by ucode loading interface.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Liu [Wed, 15 May 2019 17:58:20 +0000 (13:58 -0400)]
drm/amdgpu: enable VCN2.0 DPG mode
It will be the default for VCN2.x family
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Liu [Fri, 24 May 2019 16:51:48 +0000 (12:51 -0400)]
drm/amdgpu/VCN2.0: add DPG pause mode
Pause the DPG when not doing decode
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Liu [Tue, 14 May 2019 18:36:42 +0000 (14:36 -0400)]
drm/amdgpu/VCN2.0: add DPG mode start and stop (v2)
This is for using SRAM directly
v2: rebase (Alex)
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Liu [Fri, 24 May 2019 16:19:00 +0000 (12:19 -0400)]
drm/amdgpu/VCN2.0: add direct SRAM read and write
This will be the basic and used for DPG mode
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Liu [Tue, 14 May 2019 16:55:54 +0000 (12:55 -0400)]
drm/amdgpu/VCN2.0 remove unused Macro and declaration
Just for cleanup
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Mon, 17 Jun 2019 18:17:27 +0000 (13:17 -0500)]
drm/amd/powerplay: simplified od_settings for each asic
the od_settings is asic related data, so move it to asic file.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 21 May 2019 07:37:24 +0000 (15:37 +0800)]
drm/amd/powerplay: move od_default_setting callback to asic file
the set default od_setting is asic related function,
so move thic code to vega20_ppt file.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 21 May 2019 07:19:22 +0000 (15:19 +0800)]
drm/amd/powerplay: move od8_setting helper function to vega20_ppt
these callback functions is only used for vega20 asic, to be compatible
other asics,need to move this code to vega20_ppt file
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 16 May 2019 10:24:08 +0000 (18:24 +0800)]
drm/amd/powerplay: fix clk type name error OD_SCLK OD_MCLK
use sw-smu clk type name to replace legacy clk type name
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Wed, 15 May 2019 07:59:38 +0000 (15:59 +0800)]
drm/amd/powerplay: fix deadlock issue for smu_force_performance_level
the smu->mutex is internal lock resource in sw-smu, some functions will use
it at the same time, so it maybe will cause deadlock issue.
this patch fix this issue in smu_force_performance_level function.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Xiao [Mon, 20 May 2019 04:16:19 +0000 (12:16 +0800)]
drm/amd: the data retured from PRT is expected to be 0
The dummy page for returning from PRT resides inside system memory,
need set system flag bit in VM_L2_CNTL.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
tiancyin [Wed, 5 Jun 2019 21:57:44 +0000 (16:57 -0500)]
drm/amdgpu/gfx10: update gfx golden settings
add new registers: mmPA_SC_ENHANCE_1, mmTCP_CNTL,
update registers: mmDB_DEBUG4, mmUTCL1_CTRL
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 22 May 2019 16:58:18 +0000 (11:58 -0500)]
drm/amdgpu/powerplay: add license to smu11 header
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hersen wu [Tue, 21 May 2019 19:02:23 +0000 (15:02 -0400)]
drm/amd/powerplay: add interface to get uclk dpm table
dc needs get uclk dpm table for bandwidth calculation
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hersen wu [Tue, 21 May 2019 19:38:59 +0000 (15:38 -0400)]
drm/amd/powerplay: wake up azalia from d3 by sending smu message
this is hw workaround to wake up azalia from d3. display asic
and azalia are two different pci devices. while display asic
wake from d3, current hw does not send signal to azalia.
workaround: display driver ask smu send message to azalia device
to let azalia wake up.
Defintion of SMU message, like PPSMC_MSG_BacroAudioD3PME, is per
asic. It is shared by different OS.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hersen wu [Thu, 30 May 2019 04:30:32 +0000 (23:30 -0500)]
drm/amd/powerplay: notify smu with active display count
when dc update clocks via smu, smu needs to know how many
displays active. this interface is for dc notify number
of active displays to smu.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hersen wu [Thu, 30 May 2019 04:28:55 +0000 (23:28 -0500)]
drm/amd/powerplay: allow dc request uclk change
when dc set mode or color format in frame buffer
change, it may request clock changes, like dispclk,
dcfclk, uclk. after smu get clock requests, smu
will make decision.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 4 Jun 2019 09:38:42 +0000 (17:38 +0800)]
drm/amd/powerplay: remove smu callback funciton get_mclk(get_sclk)
remove smu callback: get_mclk, get_sclk.
because the function smu_get_dpm_freq_range has the same function.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 4 Jun 2019 09:41:48 +0000 (17:41 +0800)]
drm/amd/powerplay: remove smu mutex lock in smu_hw_init
the smu mutex lock is unnecessary in smu hw init.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 30 May 2019 10:00:22 +0000 (18:00 +0800)]
drm/amd/powerplay: add thermal ctf support for navi10
add sw-CTF support for navi10
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Fri, 21 Jun 2019 16:29:29 +0000 (11:29 -0500)]
drm/amd/powerplay: fix no statements in function returning non-void
Add missing return (rebase fix).
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Mon, 10 Jun 2019 13:39:29 +0000 (21:39 +0800)]
drm/amd/powerplay: move get_thermal_temperature_range to ppt funcs
The thermal policy could be ASIC specific ones and depends on structures
in pptable. As a result, get_thermal_temperature_range should be implemented
as ppt funcs instead of smu funcs
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Fri, 17 May 2019 06:12:51 +0000 (14:12 +0800)]
drm/amd/powerplay: move function thermal_get_temperature to veag20_ppt
the fcuntion thermal_get_temperature will be access SmuMetrics_t data,
the data structure is asic related, so move vega20_ppt to implement.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Fri, 17 May 2019 06:02:15 +0000 (14:02 +0800)]
drm/amd/powerplay: move function get_metrics_table to vega20_ppt
the SmuMetrics_t table is asic related data structure.
so move vega20_ppt file to implement.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Wed, 15 May 2019 04:59:58 +0000 (12:59 +0800)]
drm/amd/powerplay: move power_dpm_force_performance_level to amdgpu_smu file
because this callback is not asic related function, so move it to top
code level to support more asic (eg: navi10)
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 16 May 2019 07:06:25 +0000 (15:06 +0800)]
drm/amd/powerplay: enable uclk dpm default on navi10
enable uclk (mclk) dpm by default on navi10
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kenneth Feng [Tue, 14 May 2019 09:34:55 +0000 (17:34 +0800)]
drm/amd/powerplay: enable ac/dc feature on navi10
enable ac/dc feature on navi10. currently we don't have
the case to verify it.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kenneth Feng [Tue, 14 May 2019 09:08:36 +0000 (17:08 +0800)]
drm/amd/powerplay: enable gfxclk ds,dcefclk ds and fw dstate on navi10
on navi10, by default the below four features are enabled.
gfxclk deep sleep: enabled and verified
fw dstate: enabled and then soc ulv is verified
dcefclk deep sleep: enabled and verified. notice that on different boards,
due to the minimum dcefclk deep sleep setting in VBIOS, we may not see dcefclk
deep sleep kicking in.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 14 May 2019 06:01:01 +0000 (14:01 +0800)]
drm/amd/powerplay: add sclk sysfs interface support for navi10
miss sclk support in force_clk_levels function
Signed-off-by: Kevin Wang <kevin1.Wang@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tao Zhou [Tue, 14 May 2019 03:37:32 +0000 (11:37 +0800)]
drm/amdgpu: correct reference clock value on navi10
remove the divisor 4
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tao Zhou [Mon, 13 May 2019 08:52:22 +0000 (16:52 +0800)]
drm/amd/powerplay/smu11: disable some pp features on navi10 A0 secure board
disable DPM UCLK and SOC DS on A0 secure board
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tao Zhou [Fri, 10 May 2019 08:31:57 +0000 (16:31 +0800)]
drm/amd/powerplay/smu11: add secure board check function (v2)
To determine whether the board is secure or not.
v2: rebase (Alex)
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tao Zhou [Mon, 13 May 2019 08:56:17 +0000 (16:56 +0800)]
drm/amd/powerplay/smu11: enable ds socclk by default
Enable soc clk deep sleep.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Fri, 10 May 2019 07:29:11 +0000 (15:29 +0800)]
drm/amd/powerplay: fix amdgpu_pm_info show gpu load error
due to the smu dma/RTOS restriction, the interval of catching smu
metric table should be more than 1ms. otherwise it will cause the gpu
activity data corruption.
Signed-off-by:Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Fri, 21 Jun 2019 16:26:18 +0000 (11:26 -0500)]
drm/amd/powerplay: simplify the interface of get_gpu_power
this callback function is only call in read_sensor in smu_v11_0.c,
so move this code to {asic}_ppt.c to implement as asic related function.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Fri, 21 Jun 2019 16:25:00 +0000 (11:25 -0500)]
drm/amd/powerplay: simplify the interface of get_current_activity_percent
this callback function is only call in read_sensor in smu_v11_0.c,
so move this code to {asic}_ppt.c to implement as asic related function.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Wed, 8 May 2019 06:37:08 +0000 (14:37 +0800)]
drm/amd/powerplay: fix dpm freq unit error (10KHz -> Mhz)
the interface smu_v11_0_get_current_clk_freq should be return 10Khz not
Mhz unit to adapt vega20 and navi10 asic at the same time.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kenneth Feng [Sun, 28 Apr 2019 09:43:36 +0000 (17:43 +0800)]
amd/powerplay: update the vcn pg
update the vcn pg function in navi10.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Sun, 28 Apr 2019 10:40:11 +0000 (18:40 +0800)]
drm/amd/powerplay: add function read_sensor for navi10
add callback function read_sensor for navi10 asic
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 25 Apr 2019 10:02:14 +0000 (18:02 +0800)]
drm/amd/powerplay: add function set_watermarks_table function for navi10
add callback function set_watermarks_table for navi10 asic
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 25 Apr 2019 08:15:21 +0000 (16:15 +0800)]
drm/amd/powerplay: add function notify_smc_display_config_change for navi10
add callback function notify_smc_display_config_change for navi10 asic
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 25 Apr 2019 07:52:54 +0000 (15:52 +0800)]
drm/amd/powerplay: add function get_profiling_clk_mask for navi10
add callback function get_profiling_clk_mask for navi10 asic
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 25 Apr 2019 07:41:13 +0000 (15:41 +0800)]
drm/amd/powerplay: add funciton get[set]_power_profile_mode for navi10 (v2)
add callback function get[set]_power_profile_mode for navi10 asic
v2: fix smu_update_table for rebase (Alex)
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Fri, 21 Jun 2019 16:19:15 +0000 (11:19 -0500)]
drm/amd/powerplay: add function get_workload_type_map for swsmu
1.add new callback function get_workload_byte for smu
2.remove old workload map function
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 23 Apr 2019 06:45:54 +0000 (14:45 +0800)]
drm/amd/powerplay: remove upload_dpm_level function for vega20
the function upload_dpm_level is an internal function,
so remove public interface.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 23 Apr 2019 05:14:15 +0000 (13:14 +0800)]
drm/amd/powerplay: add function get_fan_speed_percent for navi10
add callback function get_fan_speed_percent for navi10 asic
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 23 Apr 2019 05:05:27 +0000 (13:05 +0800)]
drm/amd/powerplay: add function set_thermal_fan_table for navi10
add callback function set_thermal_fan_table for navi10 asic
Signed-off-by:Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 23 Apr 2019 03:29:11 +0000 (11:29 +0800)]
drm/amd/powerplay: add function is_dpm_running for navi10
add callback function is_dpm_running for navi10 asic
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 23 Apr 2019 03:20:46 +0000 (11:20 +0800)]
drm/amd/powerplay: move read sensor of UVD[VCE]_POWER to amdgpu_smu file
This part of code is asic unrelated and moves to top code level.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 23 Apr 2019 03:10:30 +0000 (11:10 +0800)]
drm/amd/powerplay: add function get_current_activity_percent for navi10
add callback function get_current_activity_percent for navi10 asic
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 23 Apr 2019 03:07:52 +0000 (11:07 +0800)]
drm/amd/powerplay: add function get_gpu_power for navi10
add callback function get_gpu_power for navi10 asic
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 23 Apr 2019 03:02:24 +0000 (11:02 +0800)]
drm/amd/powerplay: add function unforce_dpm_levels for navi10
add callback function unforce_dpm_levels for navi10 asic
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 23 Apr 2019 02:53:51 +0000 (10:53 +0800)]
drm/amd/powerplay: add funciton force_dpm_limit for navi10
add callback function force_dpm_limit for navi10 asic
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 23 Apr 2019 06:16:52 +0000 (14:16 +0800)]
drm/amd/powerplay: add function display_configuration_changed for navi10
1.add callback function to support navi10 asic.
2.Remove unnecessary logical code.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Mon, 22 Apr 2019 06:37:46 +0000 (14:37 +0800)]
drm/amd/powerplay: add function pre_display_config_changed for navi10
add callback function pre_display_config_changed for navi10 asic
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Fri, 19 Apr 2019 06:05:58 +0000 (14:05 +0800)]
drm/amd/powerplay: add function get_clock_by_type_with_latency for navi10
add callback function get_clock_by_type_with_latency for navi10 asic
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Fri, 19 Apr 2019 05:27:19 +0000 (13:27 +0800)]
drm/amd/powerplay: add function populate_umd_state_clk for navi10
add callback function populate_umd_state_clk for navi10 asic
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Fri, 19 Apr 2019 02:31:18 +0000 (10:31 +0800)]
drm/amd/powerplay: add function force_clk_levels for navi10
add sysfs interface of force_clk_levels sysfs for navi10.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Mon, 22 Apr 2019 06:40:30 +0000 (14:40 +0800)]
drm/amd/powerplay: add helper function of smu_set_hard_freq_range
add this function to get dpm clock information.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Fri, 19 Apr 2019 02:19:28 +0000 (10:19 +0800)]
drm/amd/powerplay: add helper function of smu_set_soft_freq_range
add this helper function to get dpm clk information.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 18 Apr 2019 10:46:04 +0000 (18:46 +0800)]
drm/amd/powerplay: add helper function of smu_get_dpm_freq_range
add this helper function to get dpm clk information (min, max);
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 18 Apr 2019 07:06:34 +0000 (15:06 +0800)]
drm/amd/powerplay: add function print_clk_levels for navi10
add sysfs interface of print_clk_levels sysfs for navi10.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Wed, 27 Mar 2019 06:46:20 +0000 (14:46 +0800)]
drm/amd/powerplay: add helper function to get dpm freq informations
this function can help driver to get ppclk informations
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Wed, 17 Apr 2019 06:58:28 +0000 (14:58 +0800)]
drm/amd/powerplay: add function get current clock freq interface for navi10
add function of get_current_clk_freq_by_table for navi10.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Xiao [Mon, 6 May 2019 10:55:23 +0000 (18:55 +0800)]
drm/amdgpu/gfx10: require to pin/unpin CSIB BO when suspend/resume
CSIB BO is required to be pinned down to guarantee
bo is always valid when resume, and to be unpinned it
so that its content can be saved during suspend.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Xiao [Mon, 6 May 2019 08:40:48 +0000 (16:40 +0800)]
drm/amdgpu/gfx10: remove unnecessary waiting on gfx inactive
The following KIQ ring test could guarantee the previous unmap
has been done.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Xiao [Mon, 6 May 2019 08:35:41 +0000 (16:35 +0800)]
drm/amdgpu: RLC must be disabled after SMU when S3 on navi
SMU requires to interact with RLC when disable all features,
so RLC shouldn't be disabled ahead of SMU.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Xiao [Mon, 6 May 2019 08:28:22 +0000 (16:28 +0800)]
drm/amd/powerplay/smu11: disable PLL shutdown when gfxoff enabled
MP1 cannot access clock IP during MP1 FW reload, disable PLL
shutdown as a workaround.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
tiancyin [Mon, 29 Apr 2019 08:56:16 +0000 (16:56 +0800)]
drm/amd/powerplay: disable uclk dpm by default
[why]
The uclk dpm feature is not supported by some certain navi10
board like 18202, while supported by some board like 18201.
It causes modprobe failure on 18202 board.
[how]
Disabled this feature by default, it can be enabled by module parameter
uclk_dpm_support=1.
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Liu [Tue, 30 Apr 2019 14:15:38 +0000 (10:15 -0400)]
drm/amdgpu/VCN2.0: remove powergating for UVDW tile
No UVDW tile any more from VCN2.0, so mark out related fields.
It fixes error:
"[drm] Register(0) [mmUVD_PGFSM_STATUS] failed to reach value 0x002aaaaa != 0x00aaaaaa"
Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kenneth Feng [Fri, 26 Apr 2019 05:53:10 +0000 (13:53 +0800)]
amd/powerplay: enable uclk dpm
Enable uclk dpm on navi10 as the result of
removing fast switch setting.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kenneth Feng [Thu, 30 May 2019 04:20:24 +0000 (23:20 -0500)]
amd/powerplay: fix the issue of uclk dpm
PPSMC_MSG_SetUclkFastSwitch message can be applied on vega20,
but can't on navi10. This is the prerequisite of uclk dpm on
navi10.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xiaojie Yuan [Fri, 19 Apr 2019 10:44:18 +0000 (18:44 +0800)]
drm/amdgpu/gfx10: fix unbalanced MAP/UNMAP_QUEUES when async_gfx_ring is disabled
gfx_v10_0_kiq_enable_kgq() is called only when async_gfx_ring is
enabled, so should gfx_v10_0_kiq_disable_kgq().
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xiaojie Yuan [Fri, 21 Jun 2019 16:14:37 +0000 (11:14 -0500)]
drm/amdgpu/gfx10: drop redundant se/sh selection
we already selected se/sh at the beginning of the for loop
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Xiao [Mon, 15 Apr 2019 09:03:01 +0000 (17:03 +0800)]
drm/amdgpu/mes10.1: enable mes FW backdoor loading
It enables MES FW backdoor loading in ip block functions.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Xiao [Sun, 14 Apr 2019 09:16:48 +0000 (17:16 +0800)]
drm/amdgpu/mes10.1: implement mes enablement function
After MES firmware gets loaded, it enables MES engine starting execution.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Xiao [Sun, 14 Apr 2019 08:17:30 +0000 (16:17 +0800)]
drm/amdgpu/mes10.1: implement MES firmware backdoor loading
It implements MES firmware backdoor loading.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
OSDN Git Service
