OSDN Git Service
Richard Henderson [Tue, 29 Nov 2022 05:57:31 +0000 (21:57 -0800)]
tcg/loongarch64: Update tcg-insn-defs.c.inc
Regenerate with ADDU16I included:
$ cd loongarch-opcodes/scripts/go
$ go run ./genqemutcgdefs > $QEMU/tcg/loongarch64/tcg-insn-defs.c.inc
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rui Wang [Mon, 7 Nov 2022 14:47:13 +0000 (22:47 +0800)]
tcg/loongarch64: Optimize immediate loading
diff:
Imm Before After
0000000000000000 addi.w rd, zero, 0 addi.w rd, zero, 0
lu52i.d rd, zero, 0
00000000fffff800 lu12i.w rd, -1 addi.w rd, zero, -2048
ori rd, rd, 2048 lu32i.d rd, 0
lu32i.d rd, 0
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Message-Id: <
20221107144713.845550-1-wangrui@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Wed, 18 Jan 2023 00:54:50 +0000 (14:54 -1000)]
target/loongarch: Disassemble pcadd* addresses
Print both the raw field and the resolved pc-relative
address, as we do for branches.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Wed, 18 Jan 2023 00:32:38 +0000 (14:32 -1000)]
target/loongarch: Disassemble jirl properly
While jirl shares the same instruction format as bne etc,
it is not assembled the same. In particular, rd is printed
first not second and the immediate is not pc-relative.
Decode into the arg_rr_i structure, which prints correctly.
This changes the "offs" member to "imm", to update translate.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Thu, 1 Dec 2022 00:22:09 +0000 (16:22 -0800)]
target/loongarch: Enable the disassembler for host tcg
Reuse the decodetree based disassembler from
target/loongarch/ for tcg/loongarch64/.
The generation of decode-insns.c.inc into ./libcommon.fa.p/ could
eventually result in conflict, if any other host requires the same
trick, but this is good enough for now.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Thu, 19 Jan 2023 16:46:16 +0000 (06:46 -1000)]
tcg: Mark tcg helpers noinline to avoid an issue with LTO
Marking helpers __attribute__((noinline)) prevents an issue
with GCC's ipa-split pass under --enable-lto.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1454
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Idan Horowitz <idan.horowitz@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Fri, 29 Jul 2022 17:21:41 +0000 (10:21 -0700)]
linux-user: Implment host/ppc/host-signal.h
This commit re-enables ppc32 as a linux-user host,
as existance of the directory is noted by configure.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1097
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <
20220729172141.
1789105-3-richard.henderson@linaro.org>
Richard Henderson [Fri, 29 Jul 2022 17:21:40 +0000 (10:21 -0700)]
common-user/host/ppc: Implement safe-syscall.inc.S
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <
20220729172141.
1789105-2-richard.henderson@linaro.org>
Richard Henderson [Fri, 14 Oct 2022 00:24:52 +0000 (11:24 +1100)]
tcg/arm: Use register pair allocation for qemu_{ld,st}_i64
Although we still can't use ldrd and strd for all operations,
increase the chances by getting the register allocation correct.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Sat, 14 Jan 2023 02:03:44 +0000 (16:03 -1000)]
tcg: Avoid recursion in tcg_gen_mulu2_i32
We have a test for one of TCG_TARGET_HAS_mulu2_i32 or
TCG_TARGET_HAS_muluh_i32 being defined, but the test
became non-functional when we changed to always define
all of these macros.
Replace this with a build-time test in tcg_gen_mulu2_i32.
Fixes:
25c4d9cc845 ("tcg: Always define all of the TCGOpcode enum members.")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1435
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Mon, 23 Jan 2023 13:40:28 +0000 (13:40 +0000)]
Merge tag 'pull-target-arm-
20230123' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Widen cnthctl_el2 to uint64_t
* Unify checking for M Main Extension in MRS/MSR
* bitbang_i2c, versatile_i2c: code cleanups
* SME: refactor SME SM/ZA handling
* Fix physical address resolution for MTE
* Fix in_debug path in S1_ptw_translate
* Don't set EXC_RETURN.ES if Security Extension not present
* Implement DBGCLAIM registers
* Provide stubs for more external debug registers
* Look up ARMCPRegInfo at runtime, not translate time
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmPOjQQZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3vreD/sGr7outToY4FSZ4GGpC1L6
# ZwF6kjmwED/8EVaGZxWOaL2/oNoEav2YSpzUbqCa79jUx5zFBE145zYknL/bZyjS
# VLX9G2vFFCtwFQ9rc2wV/3JmTmMmSCnHqOZPMSVy5vrQKH6d41WFYZEvGpJmCgh6
# YWK4gnMqkuIHmSvxw+S6q9p/3jzPk7c3vy8eRcxp+AMnfSBkYu0kFXmr7yOwscRS
# adT8GFrkj0our/HtYqvzclVzrxcCVF1pWrtrHK7ZSddmElIcztel+1/yQH3T6onj
# aOyRj1WC3+0t9uKwUNTFSHkRUqMqr6XYvRF+cvpe5N7lbfVn57u2TwmPgUwYbZcg
# 8Mbz+LRYENzTYZa59ACxJXXcG0BivXiTwyrFR8Ck0vakcWFAjDzxHOw9CgHkDwPs
# Dd93b04esehIN7MY8/5CSkbx+8ey+YK+o7sofiDCMKcYwooM1Y+Ls21ZcjA5GH+n
# SsXp93SgagndCydD0ftRUlDTtGL7dhzaGpRmYArjeWzOKBbAmv/WfQeH47p3bpaP
# CB2RUjHzYobMGLO0yp9droOaVKqKKLtc7wGzxgJGx6j5FrN0lnCEMRrKrZJ57Q/q
# z4VoRoo0I6Q994/mVanGqXx8cSucyl0Z3HbC633WvrnZXzoM7+7HlQLhpF+yd9+s
# 4lHiw0rPgqXtwEfeMaESSQ==
# =ubIU
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 23 Jan 2023 13:35:00 GMT
# gpg: using RSA key
E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-
20230123' of https://git.linaro.org/people/pmaydell/qemu-arm: (26 commits)
target/arm: Look up ARMCPRegInfo at runtime
target/arm: Reorg do_coproc_insn
target/arm: provide stubs for more external debug registers
target/arm: implement DBGCLAIM registers
target/arm: Don't set EXC_RETURN.ES if Security Extension not present
target/arm: Fix in_debug path in S1_ptw_translate
target/arm: Fix physical address resolution for MTE
target/arm/sme: Unify set_pstate() SM/ZA helpers as set_svcr()
target/arm/sme: Rebuild hflags in aarch64_set_svcr()
target/arm/sme: Reset ZA state in aarch64_set_svcr()
target/arm/sme: Reset SVE state in aarch64_set_svcr()
target/arm/sme: Introduce aarch64_set_svcr()
target/arm/sme: Rebuild hflags in set_pstate() helpers
target/arm/sme: Reorg SME access handling in handle_msr_i()
hw/i2c/versatile_i2c: Rename versatile_i2c -> arm_sbcon_i2c
hw/i2c/versatile_i2c: Use ARM_SBCON_I2C() macro
hw/i2c/versatile_i2c: Replace TYPE_VERSATILE_I2C -> TYPE_ARM_SBCON_I2C
hw/i2c/versatile_i2c: Replace VersatileI2CState -> ArmSbconI2CState
hw/i2c/versatile_i2c: Drop useless casts from void * to pointer
hw/i2c/bitbang_i2c: Convert DPRINTF() to trace events
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 6 Jan 2023 19:44:51 +0000 (11:44 -0800)]
target/arm: Look up ARMCPRegInfo at runtime
Do not encode the pointer as a constant in the opcode stream.
This pointer is specific to the cpu that first generated the
translation, which runs into problems with both hot-pluggable
cpus and user-only threads, as cpus are removed. It's also a
potential correctness issue in the theoretical case of a
slightly-heterogenous system, because if CPU 0 generates a
TB and then CPU 1 executes it, CPU 1 will end up using CPU 0's
hash table, which might have a wrong set of registers in it.
(All our current systems are either completely homogenous,
M-profile, or have CPUs sufficiently different that they
wouldn't be sharing TBs anyway because the differences would
show up in the TB flags, so the correctness issue is only
theoretical, not practical.)
Perform the lookup in either helper_access_check_cp_reg,
or a new helper_lookup_cp_reg.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20230106194451.
1213153-3-richard.henderson@linaro.org
[PMM: added note in commit message about correctness issue]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 6 Jan 2023 19:44:50 +0000 (11:44 -0800)]
target/arm: Reorg do_coproc_insn
Move the ri == NULL case to the top of the function and return.
This allows the else to be removed and the code unindented.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id:
20230106194451.
1213153-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Evgeny Iakovlev [Fri, 20 Jan 2023 15:59:29 +0000 (16:59 +0100)]
target/arm: provide stubs for more external debug registers
Qemu doesn't implement Debug Communication Channel, as well as the rest
of external debug interface. However, Microsoft Hyper-V in tries to
access some of those registers during an EL2 context switch.
Since there is no architectural way to not advertise support for external
debug, provide RAZ/WI stubs for OSDTRRX_EL1, OSDTRTX_EL1 and OSECCR_EL1
registers in the same way the rest of DCM is currently done. Do account
for access traps though with access_tda.
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
20230120155929.32384-3-eiakovlev@linux.microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Evgeny Iakovlev [Fri, 20 Jan 2023 15:59:28 +0000 (16:59 +0100)]
target/arm: implement DBGCLAIM registers
The architecture does not define any functionality for the CLAIM tag bits.
So we will just keep the raw bits, as per spec.
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20230120155929.32384-2-eiakovlev@linux.microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 16 Dec 2022 15:24:10 +0000 (15:24 +0000)]
target/arm: Don't set EXC_RETURN.ES if Security Extension not present
In v7m_exception_taken(), for v8M we set the EXC_RETURN.ES bit if
either the exception targets Secure or if the CPU doesn't implement
the Security Extension. This is incorrect: the v8M Arm ARM specifies
that the ES bit should be RES0 if the Security Extension is not
implemented, and the pseudocode agrees.
Remove the incorrect condition, so that we leave the ES bit 0
if the Security Extension isn't implemented.
This doesn't have any guest-visible effects for our current set of
emulated CPUs, because all our v8M CPUs implement the Security
Extension; but it's worth fixing in case we add a v8M CPU without
the extension in future.
Reported-by: Igor Kotrasinski <i.kotrasinsk@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Sat, 14 Jan 2023 05:46:05 +0000 (19:46 -1000)]
target/arm: Fix in_debug path in S1_ptw_translate
During the conversion, the test against get_phys_addr_lpae got inverted,
meaning that successful translations went to the 'failed' label.
Cc: qemu-stable@nongnu.org
Fixes:
f3639a64f60 ("target/arm: Use softmmu tlbs for page table walking")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1417
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20230114054605.
2977022-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Sat, 14 Jan 2023 03:12:13 +0000 (17:12 -1000)]
target/arm: Fix physical address resolution for MTE
Conversion to probe_access_full missed applying the page offset.
Fixes:
b8967ddf ("target/arm: Use probe_access_full for MTE")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1416
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20230114031213.
2970349-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Thu, 12 Jan 2023 10:24:36 +0000 (11:24 +0100)]
target/arm/sme: Unify set_pstate() SM/ZA helpers as set_svcr()
Unify the two helper_set_pstate_{sm,za} in this function.
Do not call helper_* functions from svcr_write.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20230112102436.1913-8-philmd@linaro.org
Message-Id: <
20230112004322.161330-1-richard.henderson@linaro.org>
[PMD: Split patch in multiple tiny steps]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Thu, 12 Jan 2023 10:24:35 +0000 (11:24 +0100)]
target/arm/sme: Rebuild hflags in aarch64_set_svcr()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20230112102436.1913-7-philmd@linaro.org
Message-Id: <
20230112004322.161330-1-richard.henderson@linaro.org>
[PMD: Split patch in multiple tiny steps]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Thu, 12 Jan 2023 10:24:34 +0000 (11:24 +0100)]
target/arm/sme: Reset ZA state in aarch64_set_svcr()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20230112102436.1913-6-philmd@linaro.org
Message-Id: <
20230112004322.161330-1-richard.henderson@linaro.org>
[PMD: Split patch in multiple tiny steps]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Thu, 12 Jan 2023 10:24:33 +0000 (11:24 +0100)]
target/arm/sme: Reset SVE state in aarch64_set_svcr()
Move arm_reset_sve_state() calls to aarch64_set_svcr().
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20230112102436.1913-5-philmd@linaro.org
Message-Id: <
20230112004322.161330-1-richard.henderson@linaro.org>
[PMD: Split patch in multiple tiny steps]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Thu, 12 Jan 2023 10:24:32 +0000 (11:24 +0100)]
target/arm/sme: Introduce aarch64_set_svcr()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20230112102436.1913-4-philmd@linaro.org
Message-Id: <
20230112004322.161330-1-richard.henderson@linaro.org>
[PMD: Split patch in multiple tiny steps]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Thu, 12 Jan 2023 10:24:31 +0000 (11:24 +0100)]
target/arm/sme: Rebuild hflags in set_pstate() helpers
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20230112102436.1913-3-philmd@linaro.org
Message-Id: <
20230112004322.161330-1-richard.henderson@linaro.org>
[PMD: Split patch in multiple tiny steps]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Thu, 12 Jan 2023 10:24:30 +0000 (11:24 +0100)]
target/arm/sme: Reorg SME access handling in handle_msr_i()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20230112102436.1913-2-philmd@linaro.org
Message-Id: <
20230112004322.161330-1-richard.henderson@linaro.org>
[PMD: Split patch in multiple tiny steps]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Tue, 10 Jan 2023 08:25:08 +0000 (09:25 +0100)]
hw/i2c/versatile_i2c: Rename versatile_i2c -> arm_sbcon_i2c
This device model started with the Versatile board, named
TYPE_VERSATILE_I2C, then ended up renamed TYPE_ARM_SBCON_I2C
as per the official "ARM SBCon two-wire serial bus interface"
description from:
https://developer.arm.com/documentation/dui0440/b/programmer-s-reference/two-wire-serial-bus-interface--sbcon
Use the latter name as a better description.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20230110082508.24038-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Tue, 10 Jan 2023 08:25:07 +0000 (09:25 +0100)]
hw/i2c/versatile_i2c: Use ARM_SBCON_I2C() macro
ARM_SBCON_I2C() macro and ArmSbconI2CState typedef are
already declared via the QOM DECLARE_INSTANCE_CHECKER()
macro in "hw/i2c/arm_sbcon_i2c.h". Drop the VERSATILE_I2C
declarations from versatile_i2c.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20230110082508.24038-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Tue, 10 Jan 2023 08:25:06 +0000 (09:25 +0100)]
hw/i2c/versatile_i2c: Replace TYPE_VERSATILE_I2C -> TYPE_ARM_SBCON_I2C
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20230110082508.24038-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Tue, 10 Jan 2023 08:25:05 +0000 (09:25 +0100)]
hw/i2c/versatile_i2c: Replace VersatileI2CState -> ArmSbconI2CState
In order to rename TYPE_VERSATILE_I2C as TYPE_ARM_SBCON_I2C
(the formal ARM naming), start renaming its state.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20230110082508.24038-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Tue, 10 Jan 2023 08:25:04 +0000 (09:25 +0100)]
hw/i2c/versatile_i2c: Drop useless casts from void * to pointer
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20230110082508.24038-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Wed, 11 Jan 2023 08:50:16 +0000 (09:50 +0100)]
hw/i2c/bitbang_i2c: Convert DPRINTF() to trace events
Convert the remaining DPRINTF debug macro uses to tracepoints.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id:
20230111085016.44551-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Wed, 11 Jan 2023 08:50:15 +0000 (09:50 +0100)]
hw/i2c/bitbang_i2c: Trace state changes
Trace bitbang state machine changes with trace events.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id:
20230111085016.44551-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Wed, 11 Jan 2023 08:50:14 +0000 (09:50 +0100)]
hw/i2c/bitbang_i2c: Change state calling bitbang_i2c_set_state() helper
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id:
20230111085016.44551-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Wed, 11 Jan 2023 08:50:13 +0000 (09:50 +0100)]
hw/i2c/bitbang_i2c: Remove unused dummy MemoryRegion
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id:
20230111085016.44551-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Wed, 11 Jan 2023 08:50:12 +0000 (09:50 +0100)]
hw/i2c/bitbang_i2c: Define TYPE_GPIO_I2C in public header
Define TYPE_GPIO_I2C in the public "hw/i2c/bitbang_i2c.h"
header and use it in hw/arm/musicpal.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id:
20230111085016.44551-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
David Reiss [Mon, 9 Jan 2023 23:05:19 +0000 (15:05 -0800)]
target/arm: Unify checking for M Main Extension in MRS/MSR
BASEPRI, FAULTMASK, and their _NS equivalents only exist on devices with
the Main Extension. However, the MRS instruction did not check this,
and the MSR instruction handled it inconsistently (warning BASEPRI, but
silently ignoring writes to BASEPRI_NS). Unify this behavior and always
warn when reading or writing any of these registers if the extension is
not present.
Signed-off-by: David Reiss <dreiss@meta.com>
Message-id:
167330628518.10497.
13100425787268927786-0@git.sr.ht
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Sun, 15 Jan 2023 17:16:33 +0000 (07:16 -1000)]
target/arm: Widen cnthctl_el2 to uint64_t
This is a 64-bit register on AArch64, even if the high 44 bits
are RES0. Because this is defined as ARM_CP_STATE_BOTH, we are
asserting that the cpreg field is 64-bits.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1400
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20230115171633.
3171890-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 20 Jan 2023 16:17:56 +0000 (16:17 +0000)]
Merge tag 'pull-riscv-to-apply-
20230120' of https://github.com/alistair23/qemu into staging
Second RISC-V PR for QEMU 8.0
* riscv_htif: Support console output via proxy syscall
* Cleanup firmware and device tree loading
* Fix elen check when using vector extensions
* add RISC-V OpenSBI boot test
* Ensure we always follow MISA parsing
* Fix up masking of vsip/vsie accesses
* Trap on writes to stimecmp from VS when hvictl.VTI=1
* Introduce helper_set_rounding_mode_chkfrm
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmPKRP0ACgkQIeENKd+X
# cFTHTwgAkyRDxrLepvI0KNaT0+cUBh+3QFlJ5JRtVnDW+5R+3aGT72PTS7Migqoh
# H3IFCB2mcSdQvyjj2jDFlrFd0oVIaqE0+bnhouS/4nHB5S/vmapHi4Mc74Vv1CMB
# rgXScL+C5gDOH1I7XjqOb1FY5Vxqyhi3IzdIoj+0ysUrGmUkqx+ij/cfQL7jkH9Q
# slNAkorgwgrTgMgkJ5RKd4cjyv35O4XKLAsgixVTfJ+WcxKmc/zaJOkNM/UDnmxK
# k2+2P8bshZWtWscXbm3oMC5+2ow1QtFedEkhHqb4adkQIyolKL7P1TfMlCgMSvES
# BKl0DUhqQ+7F77tik3GPy9spQ6LpTQ==
# =ifFF
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 20 Jan 2023 07:38:37 GMT
# gpg: using RSA key
F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* tag 'pull-riscv-to-apply-
20230120' of https://github.com/alistair23/qemu: (37 commits)
hw/riscv/virt.c: move create_fw_cfg() back to virt_machine_init()
target/riscv: Remove helper_set_rod_rounding_mode
target/riscv: Introduce helper_set_rounding_mode_chkfrm
tcg/riscv: Use tcg_pcrel_diff in tcg_out_ldst
target/riscv: Trap on writes to stimecmp from VS when hvictl.VTI=1
target/riscv: Fix up masking of vsip/vsie accesses
hw/riscv: use ms->fdt in riscv_socket_fdt_write_distance_matrix()
hw/riscv: use MachineState::fdt in riscv_socket_fdt_write_id()
hw/riscv/virt.c: remove 'is_32_bit' param from create_fdt_socket_cpus()
hw/riscv/sifive_u.c: simplify create_fdt()
hw/riscv/virt.c: simplify create_fdt()
hw/riscv/spike.c: simplify create_fdt()
target/riscv: Use TARGET_FMT_lx for env->mhartid
target/riscv/cpu.c: do not skip misa logic in riscv_cpu_realize()
target/riscv/cpu: set cpu->cfg in register_cpu_props()
hw/riscv/boot.c: use MachineState in riscv_load_kernel()
hw/riscv/boot.c: use MachineState in riscv_load_initrd()
hw/riscv: write bootargs 'chosen' FDT after riscv_load_kernel()
hw/riscv: write initrd 'chosen' FDT inside riscv_load_initrd()
hw/riscv/spike.c: load initrd right after riscv_load_kernel()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 20 Jan 2023 13:17:54 +0000 (13:17 +0000)]
Merge tag 'pull-include-2023-01-20' of https://repo.or.cz/qemu/armbru into staging
Header cleanup patches for 2023-01-20
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmPKN6YSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTPeoQAIKl/BF6PFRNq0/k3vPqMe6nltjgkpa/
# p7E5qRlo31RCeUB+f0iW26mySnNTgYkE28yy57HxUML/9Lp1bbxyDgRNiJ406a4L
# kFVF04kOIFez1+mfvWN92DZqcl/EAAqNL6XqSFyO38kYwcsFsi+BZ7DLZbL9Ea8v
# wVywB96mN6KyrLWCJ2D0OqIVuPHSHol+5zt9e6+ShBgN0FfElLbv0F4KH3VJ1olA
# psKl6w6V9+c2zV1kT/H+S763m6mQdwtVo/UuOJoElI+Qib/UBxDOrhdYf4Zg7hKf
# ByUuhJUASm8y9yD/42mFs90B6eUNzLSBC8v1PgRqSqDHtllveP4RysklBlyIMlOs
# DKtqEuRuIJ/qDXliIFHY6tBnUkeITSd7BCxkQYfaGyaSOcviDSlE3AyaaBC0sY4F
# P/lTTiRg5ksvhDYtJnW3mSfmT2PY7aBtyE3D1Z84v9hek6D0reMQTE97yL/j4m7P
# wJP8aM3Z8GILCVxFIh02wmqWZhZUCGsIDS/vxVm+u060n66qtDIQFBoazsFJrCME
# eWI+qDNDr6xhLegeYajGDM9pdpQc3x0siiuHso4wMSI9NZxwP+tkCVhTpqmrRcs4
# GSH/4IlUXqEZdUQDL38DfA22C1TV8BzyMhGLTUERWWYki1sr99yv0pdFyk5r3nLB
# SURwr58rB2zo
# =dOfq
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 20 Jan 2023 06:41:42 GMT
# gpg: using RSA key
354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-include-2023-01-20' of https://repo.or.cz/qemu/armbru:
include/hw/ppc include/hw/pci-host: Drop extra typedefs
include/hw/ppc: Don't include hw/pci-host/pnv_phb.h from pnv.h
include/hw/ppc: Supply a few missing includes
include/hw/ppc: Split pnv_chip.h off pnv.h
include/hw/block: Include hw/block/block.h where needed
hw/sparc64/niagara: Use blk_name() instead of open-coding it
include/block: Untangle inclusion loops
coroutine: Use Coroutine typedef name instead of structure tag
coroutine: Split qemu/coroutine-core.h off qemu/coroutine.h
coroutine: Clean up superfluous inclusion of qemu/lockable.h
coroutine: Move coroutine_fn to qemu/osdep.h, trim includes
coroutine: Clean up superfluous inclusion of qemu/coroutine.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Markus Armbruster [Thu, 22 Dec 2022 10:46:28 +0000 (11:46 +0100)]
include/hw/ppc include/hw/pci-host: Drop extra typedefs
PnvChip is typedef'ed in five places, and PnvPhb4PecState in two.
Keep one, drop the others.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <
20221222104628.659681-5-armbru@redhat.com>
Markus Armbruster [Thu, 22 Dec 2022 10:46:27 +0000 (11:46 +0100)]
include/hw/ppc: Don't include hw/pci-host/pnv_phb.h from pnv.h
The next commit needs to include hw/ppc/pnv.h from
hw/pci-host/pnv_phb.h. Avoid an inclusion loop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <
20221222104628.659681-4-armbru@redhat.com>
Markus Armbruster [Thu, 22 Dec 2022 10:46:26 +0000 (11:46 +0100)]
include/hw/ppc: Supply a few missing includes
A few headers neglect to include headers they need. They compile only
if something else includes the required header(s) first. Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <
20221222104628.659681-3-armbru@redhat.com>
Markus Armbruster [Thu, 22 Dec 2022 10:46:25 +0000 (11:46 +0100)]
include/hw/ppc: Split pnv_chip.h off pnv.h
PnvChipClass, PnvChip, Pnv8Chip, Pnv9Chip, and Pnv10Chip are defined
in pnv.h. Many users of the header don't actually need them. One
instance is this inclusion loop: hw/ppc/pnv_homer.h includes
hw/ppc/pnv.h for typedef PnvChip, and vice versa for struct PnvHomer.
Similar structs live in their own headers: PnvHomerClass and PnvHomer
in pnv_homer.h, PnvLpcClass and PnvLpcController in pci_lpc.h,
PnvPsiClass, PnvPsi, Pnv8Psi, Pnv9Psi, Pnv10Psi in pnv_psi.h, ...
Move PnvChipClass, PnvChip, Pnv8Chip, Pnv9Chip, and Pnv10Chip to new
pnv_chip.h, and adjust include directives. This breaks the inclusion
loop mentioned above.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <
20221222104628.659681-2-armbru@redhat.com>
Markus Armbruster [Wed, 21 Dec 2022 13:35:51 +0000 (14:35 +0100)]
include/hw/block: Include hw/block/block.h where needed
hw/block/swim.h needs BlockConf.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <
20221221133551.
3967339-4-armbru@redhat.com>
Markus Armbruster [Wed, 21 Dec 2022 13:35:50 +0000 (14:35 +0100)]
hw/sparc64/niagara: Use blk_name() instead of open-coding it
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <
20221221133551.
3967339-3-armbru@redhat.com>
Markus Armbruster [Wed, 21 Dec 2022 13:35:49 +0000 (14:35 +0100)]
include/block: Untangle inclusion loops
We have two inclusion loops:
block/block.h
-> block/block-global-state.h
-> block/block-common.h
-> block/blockjob.h
-> block/block.h
block/block.h
-> block/block-io.h
-> block/block-common.h
-> block/blockjob.h
-> block/block.h
I believe these go back to Emanuele's reorganization of the block API,
merged a few months ago in commit
d7e2fe4aac8.
Fortunately, breaking them is merely a matter of deleting unnecessary
includes from headers, and adding them back in places where they are
now missing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20221221133551.
3967339-2-armbru@redhat.com>
Markus Armbruster [Wed, 21 Dec 2022 13:14:35 +0000 (14:14 +0100)]
coroutine: Use Coroutine typedef name instead of structure tag
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <
20221221131435.
3851212-6-armbru@redhat.com>
Markus Armbruster [Wed, 21 Dec 2022 13:14:34 +0000 (14:14 +0100)]
coroutine: Split qemu/coroutine-core.h off qemu/coroutine.h
qemu/coroutine.h and qemu/lockable.h include each other.
They need each other only in macro expansions, so we could simply drop
both inclusions to break the loop, and add suitable includes to files
that expand the macros.
Instead, move a part of qemu/coroutine.h to new qemu/coroutine-core.h
so that qemu/coroutine-core.h doesn't need qemu/lockable.h, and
qemu/lockable.h only needs qemu/coroutine-core.h. Result:
qemu/coroutine.h includes qemu/lockable.h includes
qemu/coroutine-core.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20221221131435.
3851212-5-armbru@redhat.com>
[Semantic rebase conflict with
7c10cb38cc "accel/tcg: Add debuginfo
support" resolved]
Daniel Henrique Barboza [Tue, 17 Jan 2023 13:27:51 +0000 (10:27 -0300)]
hw/riscv/virt.c: move create_fw_cfg() back to virt_machine_init()
Commit
1c20d3ff6004 ("hw/riscv: virt: Add a machine done notifier")
moved the initialization of fw_cfg to the virt_machine_done() callback.
Problem is that the validation of fw_cfg by devices such as ramfb is
done before the machine done notifier is called. Moving create_fw_cfg()
to machine_done() results in QEMU failing to boot when using a ramfb
device:
./qemu-system-riscv64 -machine virt -device ramfb -serial stdio
qemu-system-riscv64: -device ramfb: ramfb device requires fw_cfg with DMA
The fix is simple: move create_fw_cfg() config back to
virt_machine_init(). This happens to be the same way the ARM 'virt'
machine deals with fw_cfg (see machvirt_init() and virt_machine_done()
in hw/arm/virt.c), so we're keeping consistency with how other machines
handle this device.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1343
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20230117132751.229738-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Richard Henderson [Sun, 15 Jan 2023 16:06:57 +0000 (06:06 -1000)]
target/riscv: Remove helper_set_rod_rounding_mode
The only setting of RISCV_FRM_ROD is from the vector unit,
and now handled by helper_set_rounding_mode_chkfrm.
This helper is now unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20230115160657.
3169274-3-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Richard Henderson [Sun, 15 Jan 2023 16:06:56 +0000 (06:06 -1000)]
target/riscv: Introduce helper_set_rounding_mode_chkfrm
The new helper always validates the contents of FRM, even
if the new rounding mode is not DYN. This is required by
the vector unit.
Track whether we've validated FRM separately from whether
we've updated fp_status with a given rounding mode, so that
we can elide calls correctly.
This partially reverts
d6c4d3f2a69 which attempted the to do
the same thing, but with two calls to gen_set_rm(), which is
both inefficient and tickles an assertion in decode_save_opc.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1441
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20230115160657.
3169274-2-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Richard Henderson [Tue, 17 Jan 2023 23:04:15 +0000 (13:04 -1000)]
tcg/riscv: Use tcg_pcrel_diff in tcg_out_ldst
We failed to update this with the w^x split, so misses the fact
that true pc-relative offsets are usually small.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20230117230415.354239-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Andrew Bresticker [Thu, 15 Dec 2022 22:45:41 +0000 (17:45 -0500)]
target/riscv: Trap on writes to stimecmp from VS when hvictl.VTI=1
Per the AIA specification, writes to stimecmp from VS level should
trap when hvictl.VTI is set since the write may cause vsip.STIP to
become unset.
Fixes:
3ec0fe18a31f ("target/riscv: Add vstimecmp support")
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20221215224541.
1423431-2-abrestic@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Andrew Bresticker [Thu, 15 Dec 2022 22:45:40 +0000 (17:45 -0500)]
target/riscv: Fix up masking of vsip/vsie accesses
The current logic attempts to shift the VS-level bits into their correct
position in mip while leaving the remaining bits in-tact. This is both
pointless and likely incorrect since one would expect that any new, future
VS-level interrupts will get their own position in mip rather than sharing
with their (H)S-level equivalent. Fix this, and make the logic more
readable, by just making off the VS-level bits and shifting them into
position.
This also fixes reads of vsip, which would only ever report vsip.VSSIP
since the non-writable bits got masked off as well.
Fixes:
d028ac7512f1 ("arget/riscv: Implement AIA CSRs for 64 local interrupts on RV32")
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20221215224541.
1423431-1-abrestic@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Wed, 11 Jan 2023 17:09:44 +0000 (14:09 -0300)]
hw/riscv: use ms->fdt in riscv_socket_fdt_write_distance_matrix()
There's no need to use a MachineState pointer and a fdt pointer now that
all RISC-V machines are using the FDT from the MachineState.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20230111170948.316276-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Wed, 11 Jan 2023 17:09:43 +0000 (14:09 -0300)]
hw/riscv: use MachineState::fdt in riscv_socket_fdt_write_id()
There's no need to use a MachineState pointer and a fdt pointer now that
all RISC-V machines are using the FDT from the MachineState.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20230111170948.316276-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Wed, 11 Jan 2023 17:09:42 +0000 (14:09 -0300)]
hw/riscv/virt.c: remove 'is_32_bit' param from create_fdt_socket_cpus()
create_fdt_socket_cpus() writes a different 'mmu-type' value if we're
running in 32 or 64 bits. However, the flag is being calculated during
virt_machine_init(), and is passed around in create_fdt(), then
create_fdt_socket(), and then finally create_fdt_socket_cpus(). None of
the intermediate functions are using the flag, which is a bit
misleading.
Remove 'is_32_bit' flag from create_fdt_socket_cpus() and calculate it
using the already available RISCVVirtState pointer. This will also
change the signature of create_fdt_socket() and create_fdt(), making it
clear that these functions don't do anything special when we're running
in 32 bit mode.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20230111170948.316276-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Wed, 11 Jan 2023 17:09:41 +0000 (14:09 -0300)]
hw/riscv/sifive_u.c: simplify create_fdt()
'cmdline' isn't being used. Remove it.
A MachineState pointer is being retrieved via a MACHINE() macro calling
qdev_get_machine(). Use MACHINE(s) instead to avoid calling qdev().
'mem_size' is being set as machine->ram_size by the caller. Retrieve it
via ms->ram_size.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20230111170948.316276-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Wed, 11 Jan 2023 17:09:40 +0000 (14:09 -0300)]
hw/riscv/virt.c: simplify create_fdt()
'mem_size' and 'cmdline' aren't being used. Remove them.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20230111170948.316276-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Wed, 11 Jan 2023 17:09:39 +0000 (14:09 -0300)]
hw/riscv/spike.c: simplify create_fdt()
'mem_size' and 'cmdline' are unused.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20230111170948.316276-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Mon, 9 Jan 2023 15:26:55 +0000 (23:26 +0800)]
target/riscv: Use TARGET_FMT_lx for env->mhartid
env->mhartid is currently casted to long before printed, which drops
the high 32-bit for rv64 on 32-bit host. Use TARGET_FMT_lx instead.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20230109152655.340114-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Fri, 13 Jan 2023 17:52:30 +0000 (14:52 -0300)]
target/riscv/cpu.c: do not skip misa logic in riscv_cpu_realize()
All RISCV CPUs are setting cpu->cfg during their cpu_init() functions,
meaning that there's no reason to skip all the misa validation and setup
if misa_ext was set beforehand - especially since we're setting an
updated value in set_misa() in the end.
Put this code chunk into a new riscv_cpu_validate_set_extensions()
helper and always execute it regardless of what the board set in
env->misa_ext.
This will put more responsibility in how each board is going to init
their attributes and extensions if they're not using the defaults.
It'll also allow realize() to do its job looking only at the extensions
enabled per se, not corner cases that some CPUs might have, and we won't
have to change multiple code paths to fix or change how extensions work.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <
20230113175230.473975-3-dbarboza@ventanamicro.com>
[ Changes by AF:
- Rebase
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Fri, 13 Jan 2023 17:52:29 +0000 (14:52 -0300)]
target/riscv/cpu: set cpu->cfg in register_cpu_props()
There is an informal contract between the cpu_init() functions and
riscv_cpu_realize(): if cpu->env.misa_ext is zero, assume that the
default settings were loaded via register_cpu_props() and do validations
to set env.misa_ext. If it's not zero, skip this whole process and
assume that the board somehow did everything.
At this moment, all SiFive CPUs are setting a non-zero misa_ext during
their cpu_init() and skipping a good chunk of riscv_cpu_realize(). This
causes problems when the code being skipped in riscv_cpu_realize()
contains fixes or assumptions that affects all CPUs, meaning that SiFive
CPUs are missing out.
To allow this code to not be skipped anymore, all the cpu->cfg.ext_*
attributes needs to be set during cpu_init() time. At this moment this
is being done in register_cpu_props(). The SiFive boards are setting
their own extensions during cpu_init() though, meaning that they don't
want all the defaults from register_cpu_props().
Let's move the contract between *_cpu_init() and riscv_cpu_realize() to
register_cpu_props(). Inside this function we'll check if
cpu->env.misa_ext was set and, if that's the case, set all relevant
cpu->cfg.ext_* attributes, and only that. Leave the 'misa_ext' = 0 case
as is today, i.e. loading all the defaults from riscv_cpu_extensions[].
register_cpu_props() can then be called by all the cpu_init() functions,
including the SiFive ones. This will make all CPUs behave more in line
with what riscv_cpu_realize() expects.
This will also make the cpu_init() functions even more alike, but at this
moment we would need some design changes in how we're initializing
extensions/attributes (e.g. some CPUs are setting cfg options after
register_cpu_props(), so we can't simply add the function to a common
post_init() hook) to make a common cpu_init() code across all CPUs.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20230113175230.473975-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 2 Jan 2023 11:52:39 +0000 (08:52 -0300)]
hw/riscv/boot.c: use MachineState in riscv_load_kernel()
All callers are using kernel_filename as machine->kernel_filename.
This will also simplify the changes in riscv_load_kernel() that we're
going to do next.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20230102115241.25733-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 2 Jan 2023 11:52:38 +0000 (08:52 -0300)]
hw/riscv/boot.c: use MachineState in riscv_load_initrd()
'filename', 'mem_size' and 'fdt' from riscv_load_initrd() can all be
retrieved by the MachineState object for all callers.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20230102115241.25733-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 2 Jan 2023 11:52:37 +0000 (08:52 -0300)]
hw/riscv: write bootargs 'chosen' FDT after riscv_load_kernel()
The sifive_u, spike and virt machines are writing the 'bootargs' FDT
node during their respective create_fdt().
Given that bootargs is written only when '-append' is used, and this
option is only allowed with the '-kernel' option, which in turn is
already being check before executing riscv_load_kernel(), write
'bootargs' in the same code path as riscv_load_kernel().
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20230102115241.25733-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 2 Jan 2023 11:52:36 +0000 (08:52 -0300)]
hw/riscv: write initrd 'chosen' FDT inside riscv_load_initrd()
riscv_load_initrd() returns the initrd end addr while also writing a
'start' var to mark the addr start. These informations are being used
just to write the initrd FDT node. Every existing caller of
riscv_load_initrd() is writing the FDT in the same manner.
We can simplify things by writing the FDT inside riscv_load_initrd(),
sparing callers from having to manage start/end addrs to write the FDT
themselves.
An 'if (fdt)' check is already inserted at the end of the function
because we'll end up using it later on with other boards that doesn´t
have a FDT.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20230102115241.25733-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 2 Jan 2023 11:52:35 +0000 (08:52 -0300)]
hw/riscv/spike.c: load initrd right after riscv_load_kernel()
This will make the code more in line with what the other boards are
doing. We'll also avoid an extra check to machine->kernel_filename since
we already checked that before executing riscv_load_kernel().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <
20230102115241.25733-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 2 Jan 2023 11:52:34 +0000 (08:52 -0300)]
hw/riscv/boot.c: exit early if filename is NULL in load functions
riscv_load_firmware(), riscv_load_initrd() and riscv_load_kernel() works
under the assumption that a 'filename' parameter is always not NULL.
This is currently the case since all callers of these functions are
checking for NULL before calling them. Add an g_assert() to make sure
that a NULL value in these cases are to be considered a bug.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20230102115241.25733-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 2 Jan 2023 11:52:33 +0000 (08:52 -0300)]
hw/riscv/sifive_u: use 'fdt' from MachineState
The MachineState object provides a 'fdt' pointer that is already being
used by other RISC-V machines, and it's also used by the 'dumpdtb' QMP
command.
Remove the 'fdt' pointer from SiFiveUState and use MachineState::fdt
instead.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <
20230102115241.25733-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 2 Jan 2023 11:52:32 +0000 (08:52 -0300)]
hw/riscv/spike: use 'fdt' from MachineState
The MachineState object provides a 'fdt' pointer that is already being
used by other RISC-V machines, and it's also used by the 'dumpdtb' QMP
command.
Remove the 'fdt' pointer from SpikeState and use MachineState::fdt
instead.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <
20230102115241.25733-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 2 Jan 2023 11:52:31 +0000 (08:52 -0300)]
tests/avocado: add RISC-V OpenSBI boot test
This test is used to do a quick sanity check to ensure that we're able
to run the existing QEMU FW image.
'sifive_u', 'spike' and 'virt' riscv64 machines, and 'sifive_u' and
'virt' 32 bit machines are able to run the default RISCV64_BIOS_BIN |
RISCV32_BIOS_BIN firmware with minimal options.
The riscv32 'spike' machine isn't bootable at this moment, requiring an
OpenSBI fix [1] and QEMU side changes [2]. We could just leave at that
or add a 'skip' test to remind us about it. To work as a reminder that
we have a riscv32 'spike' test that should be enabled as soon as OpenSBI
QEMU rom receives the fix, we're adding a 'skip' test:
(06/18) tests/avocado/riscv_opensbi.py:RiscvOpenSBI.test_riscv32_spike:
SKIP: requires OpenSBI fix to work
[1] https://patchwork.ozlabs.org/project/opensbi/patch/
20221226033603.
1860569-1-bmeng@tinylab.org/
[2] https://patchwork.ozlabs.org/project/qemu-devel/list/?series=334159
Cc: Cleber Rosa <crosa@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Tested-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20230102115241.25733-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Dongxue Zhang [Thu, 15 Dec 2022 08:27:14 +0000 (16:27 +0800)]
target/riscv/cpu.c: Fix elen check
The elen check should be cpu->cfg.elen in range [8, 64].
Signed-off-by: Dongxue Zhang <elta.era@gmail.com>
Reviewed-by: LIU Zhiwei <zhiwe_liu@linux.alibaba.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
167236721596.15277.
2653405273227256289-0@git.sr.ht>
[ Changes by AF:
- Tidy up commit message
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Thu, 29 Dec 2022 10:31:23 +0000 (18:31 +0800)]
hw/riscv: spike: Decouple create_fdt() dependency to ELF loading
At present create_fdt() calls htif_uses_elf_symbols() to determine
whether to insert a <reg> property for the HTIF. This unfortunately
creates a hidden dependency to riscv_load_{firmware,kernel} that
create_fdt() must be called after the ELF {firmware,kernel} image
has been loaded.
Decouple such dependency be adding a new parameter to create_fdt(),
whether custom HTIF base address is used. The flag will be set if
non ELF {firmware,kernel} image is given by user.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <
20221229091828.
1945072-13-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Thu, 29 Dec 2022 09:18:27 +0000 (17:18 +0800)]
hw/riscv/boot.c: Introduce riscv_find_firmware()
Rename previous riscv_find_firmware() to riscv_find_bios(), and
introduce a new riscv_find_firmware() to implement the first half
part of the work done in riscv_find_and_load_firmware().
This new API is helpful for machine that wants to know the final
chosen firmware file name but does not want to load it.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20221229091828.
1945072-12-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Thu, 29 Dec 2022 09:18:26 +0000 (17:18 +0800)]
hw/riscv/boot.c: introduce riscv_default_firmware_name()
Some boards are duplicating the 'riscv_find_and_load_firmware' call
because the 32 and 64 bits images have different names. Create
a function to handle this detail instead of hardcoding it in the boards.
Ideally we would bake this logic inside riscv_find_and_load_firmware(),
or even create a riscv_load_default_firmware(), but at this moment we
cannot infer whether the machine is running 32 or 64 bits without
accessing RISCVHartArrayState, which in turn can't be accessed via the
common code from boot.c. In the end we would exchange 'firmware_name'
for a flag with riscv_is_32bit(), which isn't much better than what we
already have today.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <
20221221182300.307900-6-dbarboza@ventanamicro.com>
Message-Id: <
20221229091828.
1945072-11-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Thu, 29 Dec 2022 09:18:25 +0000 (17:18 +0800)]
hw/riscv/boot.c: make riscv_find_firmware() static
The only caller is riscv_find_and_load_firmware(), which is in the same
file.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <
20221221182300.307900-5-dbarboza@ventanamicro.com>
Message-Id: <
20221229091828.
1945072-10-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Thu, 29 Dec 2022 09:18:24 +0000 (17:18 +0800)]
hw/riscv: spike: Remove the out-of-date comments
Spike machine now supports OpenSBI plain binary bios image, so the
comments are no longer valid.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20221229091828.
1945072-9-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Thu, 29 Dec 2022 09:18:23 +0000 (17:18 +0800)]
hw/char: riscv_htif: Support console output via proxy syscall
At present the HTIF proxy syscall is unsupported. On RV32, only
device 0 is supported so there is no console device for RV32.
The only way to implement console funtionality on RV32 is to
support the SYS_WRITE syscall.
With this commit, the Spike machine is able to boot the 32-bit
OpenSBI generic image.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20221229091828.
1945072-8-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Thu, 29 Dec 2022 09:18:22 +0000 (17:18 +0800)]
hw/char: riscv_htif: Remove forward declarations for non-existent variables
There are forward declarations for 'vmstate_htif' and 'htif_io_ops'
in riscv_htif.h however there are no definitions in the C codes.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20221229091828.
1945072-7-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Thu, 29 Dec 2022 09:18:21 +0000 (17:18 +0800)]
hw/char: riscv_htif: Move registers from CPUArchState to HTIFState
At present for some unknown reason the HTIF registers (fromhost &
tohost) are defined in the RISC-V CPUArchState. It should really
be put in the HTIFState struct as it is only meaningful to HTIF.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20221229091828.
1945072-6-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Thu, 29 Dec 2022 09:18:20 +0000 (17:18 +0800)]
hw/char: riscv_htif: Use conventional 's' for HTIFState
QEMU source codes tend to use 's' to represent the hardware state.
Let's use it for HTIFState.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20221229091828.
1945072-5-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Thu, 29 Dec 2022 09:18:19 +0000 (17:18 +0800)]
hw/char: riscv_htif: Drop useless assignment of memory region
struct HTIFState has 3 members for address space and memory region,
and are initialized during htif_mm_init(). But they are actually
useless. Drop them.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20221229091828.
1945072-4-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Thu, 29 Dec 2022 09:18:18 +0000 (17:18 +0800)]
hw/char: riscv_htif: Drop {to, from}host_size in HTIFState
These are not used anywhere. Drop them.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20221229091828.
1945072-3-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Thu, 29 Dec 2022 09:18:17 +0000 (17:18 +0800)]
hw/char: riscv_htif: Avoid using magic numbers
The Spike HTIF is poorly documented. The only relevant info we can
get from the internet is from Andrew Waterman at [1].
Add a comment block before htif_handle_tohost_write() to explain
the tohost register format, and use meaningful macros instead of
magic numbers in the codes.
While we are here, correct 2 multi-line comment blocks that have
wrong format.
Link: https://github.com/riscv-software-src/riscv-isa-sim/issues/364#issuecomment-607657754
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20221229091828.
1945072-2-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Peter Maydell [Thu, 19 Jan 2023 18:58:03 +0000 (18:58 +0000)]
Merge tag 'pull-monitor-2023-01-19' of https://repo.or.cz/qemu/armbru into staging
Monitor patches for 2023-01-19
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmPJO+8SHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTbBwP/RsZLLDCz6moSet4Hly+vPTWibyYYDkS
# uk6a70Ja7fsAcONumBaXdpoinPtbED662eYxidbLFr//tAjnKu57jnwAIFTTOKJc
# sCVtdgOlbNSZFrqyIr8ctY6yKJLLBaa02in/BczFIQphPatpUwvxrvrdgxc58NNK
# qaeKDnWKXvZ6EUaYPpruxqE5J/NV0ykyab9Rc8rNJqdUMnqbd662zHcA0l31misH
# gAfKBhReo53XUbfvoFS9kaoBQaTJPk4CcKHaT7NJXR8ezlIEQVLtFzdfAf04kSdG
# 8VRwwx5NDpmafATEaMXJhJ74Fyc8biDWXoQ6aA1jdUCu39B2EPl1H1qlCG9ZYp7w
# CkbJU6UwtOYsG11NU8Mr1u9rMlAgAVkkLsMYiiI4cpLBkI0vkoV66ms3oZgYUtbq
# /TgCpfjKpE87ZBLIwJjGsg+TMN2AH5lpt/49HV8QEFA8mI7h29oo2HvheXE7PPzH
# b9iIe9ADrKwB5DpJW2vigPj+fSHqoSGd3R/hUcMVOubKnJme97mys2hD+sfxga/H
# qfKLzgTqQI2dGhfow/8wzfYdfYmkii+ggDyzcxLAxx2ITO/fLWJygmTgXJmA3dl6
# pnpZvhOu4dEgK4VstugXcvgCVHUVXd9wqI9wxJAc+mKanTmZIJBnxCm/QVG2/w/d
# 5IgmP9Se7vb0
# =7OEC
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Jan 2023 12:47:43 GMT
# gpg: using RSA key
354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-monitor-2023-01-19' of https://repo.or.cz/qemu/armbru:
ui: Simplify control flow in qemu_mouse_set()
ui: Split hmp_mouse_set() and move the HMP part to ui/
ui: Don't check for mode change after mouse_set error
ui: Reduce nesting in hmp_change_vnc() slightly
ui: Factor out hmp_change_vnc(), and move to ui/ui-hmp-cmds.c
ui: Improve "change vnc" error reporting
ui: Move HMP commands from monitor to new ui/ui-hmp-cmds.c
ui: Factor out qmp_add_client() parts and move to ui/ui-qmp-cmds.c
ui: Move QMP commands from monitor to new ui/ui-qmp-cmds.c
ui: Clean up a few things checkpatch.pl would flag later on
ui/spice: Give hmp_info_spice()'s channel_names[] static linkage
ui/spice: QXLInterface method set_mm_time() is now dead, drop
ui/spice: Require spice-server >= 0.14.0
Revert "hmp: info spice: take out webdav"
ui/spice: Require spice-protocol >= 0.14.0
ui: Fix silent truncation of numeric keys in HMP sendkey
ui: Check numeric part of expire_password argument @time properly
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 19 Jan 2023 15:05:29 +0000 (15:05 +0000)]
Merge tag 'trivial-branch-for-8.0-pull-request' of https://gitlab.com/laurent_vivier/qemu into staging
trivial branch pull request
20230118
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmPHpRASHGxhdXJlbnRA
# dml2aWVyLmV1AAoJEPMMOL0/L748fwEP+wTA6dBYqRnZMCPEkk6yy0nSVr6GF8FA
# i9JrUbRuBf8WT2RAFJEwOyACTaYgCwqU9tu6UxG2ekGfGDtR84HH1yozTAbBuPct
# qoT/cvrQ0/Nfymw1Ia1vH5D6EQiAn+j6/1C41PEHvqTQBMe8E4U8jDIwbXTaJS7j
# QSUDplRfCbSBXQ9ctFrcD6XxX06dj4U9l8L4gl5Uc4B1OmFacyJnfzMIyVRTIhvF
# S4sKB/8B36emFITw/gk+MW5HnBgjEIWvZjof71eglMqo79jmacGeOe8NQi1+ApQ1
# lVmllKewdgLHVwdOGVX4dCJQdhSL/7DjreqtKGrUmhZfJdmCWJdl3jVWqhr4lfME
# U7ytd68iLdKgfKqepc3+WbhA8pWT+brPVpTU9hq17DsNJqeZa6628OguDEtjz9dP
# 4Y4XFZMxFadYl4YaCpGzTN1tqsrO8Ct+Kvq/90nt5FUeTX+i+/WM/9XXNf9MD4VS
# OVCwHXCa4yHMMq2LGV0sWaL7vSI26lv0asKtalAelbVZhVyB1kSZfde2rZXuhoD5
# S2d9x2bcFG6WNlDfyaANkCKyHlxUaOroQVE+y0SqgtaC2oPhuXtG6fusiyvjG9+l
# 9O6jy87e4uR+Xach6MmybMjiPDi0VMvPayVz3BR/6hBZZB/GkLO1OmNQcZiXcbOd
# yROzKPmyZ/q+
# =35x0
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 Jan 2023 07:51:44 GMT
# gpg: using RSA key
CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* tag 'trivial-branch-for-8.0-pull-request' of https://gitlab.com/laurent_vivier/qemu:
hw/ssi/sifive_spi.c: spelling: reigster
hw/cxl/cxl-host: Fix an error message typo
hw/cxl/cxl-cdat.c: spelling: missmatch
hw/pvrdma: Protect against buggy or malicious guest driver
ccid-card-emulated: fix cast warning/error
hw/i386/pc: Remove unused 'owner' argument from pc_pci_as_mapping_init
tests/qtest/test-hmp: Improve the check for verbose mode
hw/usb: Mark the XLNX_VERSAL-related files as target-independent
hw/intc: Mark more interrupt-controller files as target independent
hw/cpu: Mark arm11 and realview mpcore as target-independent code
hw/arm: Move various units to softmmu_ss[]
hw/tpm: Move tpm_ppi.c out of target-specific source set
hw/intc: Move some files out of the target-specific source set
hw/display: Move omap_lcdc.c out of target-specific source set
Call qemu_socketpair() instead of socketpair() when possible
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Markus Armbruster [Mon, 9 Jan 2023 19:03:21 +0000 (20:03 +0100)]
ui: Simplify control flow in qemu_mouse_set()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20230109190321.
1056914-18-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Markus Armbruster [Mon, 9 Jan 2023 19:03:20 +0000 (20:03 +0100)]
ui: Split hmp_mouse_set() and move the HMP part to ui/
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20230109190321.
1056914-17-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Markus Armbruster [Mon, 9 Jan 2023 19:03:19 +0000 (20:03 +0100)]
ui: Don't check for mode change after mouse_set error
hmp_mouse_set() doesn't bail out when it can't find a mouse.
Harmless, since qemu_input_check_mode_change() should be a no-op then.
Clean it up anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20230109190321.
1056914-16-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Markus Armbruster [Mon, 9 Jan 2023 19:03:18 +0000 (20:03 +0100)]
ui: Reduce nesting in hmp_change_vnc() slightly
Transform
if (good) {
do stuff
} else {
handle error
}
to
if (!good) {
handle error
return;
}
do stuff
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <
20230109190321.
1056914-15-armbru@redhat.com>
Markus Armbruster [Mon, 9 Jan 2023 19:03:17 +0000 (20:03 +0100)]
ui: Factor out hmp_change_vnc(), and move to ui/ui-hmp-cmds.c
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <
20230109190321.
1056914-14-armbru@redhat.com>
Markus Armbruster [Mon, 9 Jan 2023 19:03:16 +0000 (20:03 +0100)]
ui: Improve "change vnc" error reporting
Switch from monitor_printf() to error_setg() and hmp_handle_error().
This makes "this is an error" more obvious both in the source and in
the monitor, where hmp_handle_error() prefixes the message with
"Error: ".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <
20230109190321.
1056914-13-armbru@redhat.com>
Markus Armbruster [Mon, 9 Jan 2023 19:03:15 +0000 (20:03 +0100)]
ui: Move HMP commands from monitor to new ui/ui-hmp-cmds.c
This moves these commands from MAINTAINERS section "Human
Monitor (HMP)" to "Graphics".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <
20230109190321.
1056914-12-armbru@redhat.com>
Markus Armbruster [Mon, 9 Jan 2023 19:03:14 +0000 (20:03 +0100)]
ui: Factor out qmp_add_client() parts and move to ui/ui-qmp-cmds.c
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <
20230109190321.
1056914-11-armbru@redhat.com>
Markus Armbruster [Mon, 9 Jan 2023 19:03:13 +0000 (20:03 +0100)]
ui: Move QMP commands from monitor to new ui/ui-qmp-cmds.c
This moves these commands from MAINTAINERS section "QMP" to
"Graphics".
Command add-client applies to socket character devices in addition to
display devices. Move it anyway. Aside: the way @protocol character
device IDs and display types is bad design.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <
20230109190321.
1056914-10-armbru@redhat.com>
Markus Armbruster [Mon, 9 Jan 2023 19:03:12 +0000 (20:03 +0100)]
ui: Clean up a few things checkpatch.pl would flag later on
Fix a few style violations so that checkpatch.pl won't complain when I
move this code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <
20230109190321.
1056914-9-armbru@redhat.com>
Markus Armbruster [Mon, 9 Jan 2023 19:03:11 +0000 (20:03 +0100)]
ui/spice: Give hmp_info_spice()'s channel_names[] static linkage
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <
20230109190321.
1056914-8-armbru@redhat.com>
Markus Armbruster [Mon, 9 Jan 2023 19:03:10 +0000 (20:03 +0100)]
ui/spice: QXLInterface method set_mm_time() is now dead, drop
SPICE_NEEDS_SET_MM_TIME is now always off. Bury the dead code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <
20230109190321.
1056914-7-armbru@redhat.com>
Markus Armbruster [Mon, 9 Jan 2023 19:03:09 +0000 (20:03 +0100)]
ui/spice: Require spice-server >= 0.14.0
Version 0.14.0 is now old enough to have made it into the major
distributions:
Debian 11: 0.14.3
RHEL-8: 0.14.3
FreeBSD (ports): 0.15.0
Fedora 35: 0.15.0
Ubuntu 20.04: 0.14.2
OpenSUSE Leap 15.3: 0.14.3
Requiring it lets us drop a number of version checks. The next commit
will clean up some more.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <
20230109190321.
1056914-6-armbru@redhat.com>