OSDN Git Service
Javier Martinez Canillas [Wed, 15 Mar 2017 04:45:03 +0000 (01:45 -0300)]
iio: pressure: mpl3115: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Javier Martinez Canillas [Wed, 15 Mar 2017 04:45:02 +0000 (01:45 -0300)]
iio: accel: mma7455_i2c: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Javier Martinez Canillas [Wed, 15 Mar 2017 04:45:01 +0000 (01:45 -0300)]
iio: magnetometer: mag3110: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Javier Martinez Canillas [Wed, 15 Mar 2017 04:45:00 +0000 (01:45 -0300)]
iio: adc: ti-ads1015: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Javier Martinez Canillas [Wed, 15 Mar 2017 04:44:59 +0000 (01:44 -0300)]
iio: dac: max5821: Set .of_match_table to OF device ID table
The driver has a OF device ID table but the struct i2c_driver
.of_match_table field is not set.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Javier Martinez Canillas [Wed, 15 Mar 2017 04:44:58 +0000 (01:44 -0300)]
iio: light: apds9960: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Javier Martinez Canillas [Wed, 15 Mar 2017 04:44:57 +0000 (01:44 -0300)]
iio: accel: bma180: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Javier Martinez Canillas [Wed, 15 Mar 2017 04:44:56 +0000 (01:44 -0300)]
iio: imu: inv_mpu6050: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Javier Martinez Canillas [Wed, 15 Mar 2017 04:44:55 +0000 (01:44 -0300)]
iio: pressure: hp03: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Javier Martinez Canillas [Wed, 15 Mar 2017 04:44:54 +0000 (01:44 -0300)]
iio: light: tsl2563: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Javier Martinez Canillas [Wed, 15 Mar 2017 04:44:53 +0000 (01:44 -0300)]
iio: light: us5182d: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Javier Martinez Canillas [Wed, 15 Mar 2017 04:44:52 +0000 (01:44 -0300)]
iio: dac: mcp4725: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Javier Martinez Canillas [Wed, 15 Mar 2017 04:44:51 +0000 (01:44 -0300)]
iio: magnetometer: bmc150_magn_i2c: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Javier Martinez Canillas [Wed, 15 Mar 2017 04:44:50 +0000 (01:44 -0300)]
iio: mlx96014: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Crt Mori <cmo@melexis.com>
Acked-by: Crt Mori <cmo@melexis.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Javier Martinez Canillas [Wed, 15 Mar 2017 04:44:49 +0000 (01:44 -0300)]
iio: adc: ina2xx: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Miguel Robles [Thu, 16 Mar 2017 23:35:45 +0000 (00:35 +0100)]
iio: accel: Prefer unsigned int to bare use of unsigned
Fix checkpatch warnings:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Signed-off-by: Miguel Robles <miguel.robles@farole.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Aishwarya Pant [Fri, 17 Mar 2017 21:43:56 +0000 (03:13 +0530)]
staging: iio: accel: adis16201: remove iio_dev mlock
In the driver adis16201 read raw does not require an iio_dev->mlock for
reads. It can run concurrently as adis_read_reg_16() is protected by a
transaction lock.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Varsha Rao [Tue, 14 Mar 2017 16:23:18 +0000 (21:53 +0530)]
staging: iio: adis16240: Remove mutex_lock() and mutex_unlock() function call.
Remove mutex_lock() and mutex_unlock() function calls, as the
adis16240_spi_read_signed() function can be run parallel and safely
multiple times. Also remove the mutex.h header file and comment, which
are no longer required.
As indio_dev is declared and initialized in adis16240_spi_read_signed(),
again declaration to same type and initialization to same value is not
required, remove it from adis16240_read_12bit_signed().
Simplify the return logic, by merging assignment and return into a single
line.
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
sayli karnik [Mon, 13 Mar 2017 17:56:18 +0000 (23:26 +0530)]
staging: iio: ad9834: Remove unnecessary goto statement
The patch removes unnecessary use of goto statement.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
sayli karnik [Mon, 13 Mar 2017 16:35:27 +0000 (22:05 +0530)]
staging: iio: ad9834: Use private driver lock instead of mlock
iio_dev->mlock should be used by the IIO core only for protecting
device operating mode changes. ie. Changes between INDIO_DIRECT_MODE,
INDIO_BUFFER_* modes.
Replace mlock with a lock in the device's global data to protect
hardware state changes.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Miguel Robles [Tue, 14 Mar 2017 15:52:43 +0000 (16:52 +0100)]
Staging: iio: cdc: ad7152.c, use octal permissions instead of symbolic
Fix checkpatch warnings:
Symbolic permissions are not preferred. Consider using octal permissions.
Signed-off-by: Miguel Robles <miguel.robles@farole.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
William Breathitt Gray [Tue, 10 Jan 2017 18:51:29 +0000 (13:51 -0500)]
iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option
PC/104 drivers should be hidden on machines which do not support PC/104
devices. This patch adds the PC104 Kconfig option as a dependency for
the relevant PC/104 device driver Kconfig options.
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Aishwarya Pant [Mon, 13 Mar 2017 22:04:25 +0000 (03:34 +0530)]
staging:iio:cdc:
ade7746 replace mlock with driver private lock
The IIO subsystem is redefining iio_dev mlock to be used by IIO core
only for protecting device operating mode changes.
In driver ad7746 wherever mlock was used to protect hardware state
changes, it has been replaced with a driver private lock.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Narcisa Ana Maria Vasile [Sun, 5 Mar 2017 16:26:54 +0000 (18:26 +0200)]
staging: iio: adis16240: Group similar macros into enums
Group the scan indexes into an enum.
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Narcisa Ana Maria Vasile [Sun, 5 Mar 2017 16:26:41 +0000 (18:26 +0200)]
staging: iio: adis16209: Group similar macros into enums
Group the scan indexes into an enum.
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
simran singhal [Sat, 11 Mar 2017 14:26:44 +0000 (19:56 +0530)]
staging: iio: gyro: Remove & on function name to conform to similar IIO drivers
Remove & from function pointers to conform to the style preferred in IIO.
(Note that this is fine in staging drivers, but would create too much churn
to do outside of staging, unless otherwise working on a driver).
Done using the following semantic patch
// <smpl>
@r@
identifier f;
@@
f(...) { ... }
@@
identifier r.f;
@@
- &f
+ f
// </smpl>
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
simran singhal [Sat, 11 Mar 2017 14:26:43 +0000 (19:56 +0530)]
staging: iio: resolver: Remove & on function name to align with other IIO drivers.
Remove & from function pointers to conform to the style found in the wider
subsystem. Done using the following semantic patch
// <smpl>
@r@
identifier f;
@@
f(...) { ... }
@@
identifier r.f;
@@
- &f
+ f
// </smpl>
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
simran singhal [Sat, 11 Mar 2017 14:26:42 +0000 (19:56 +0530)]
staging: iio: adis16203: Remove exceptional & on function name
Remove & from function pointers to conform to the style found elsewhere
in the file. Done using the following semantic patch
// <smpl>
@r@
identifier f;
@@
f(...) { ... }
@@
identifier r.f;
@@
- &f
+ f
// </smpl>
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
simran singhal [Sat, 11 Mar 2017 14:26:41 +0000 (19:56 +0530)]
staging: iio: adis16209: Remove exceptional & on function name
Remove & from function pointers to conform to the style found elsewhere
in the file. Done using the following semantic patch
// <smpl>
@r@
identifier f;
@@
f(...) { ... }
@@
identifier r.f;
@@
- &f
+ f
// </smpl>
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
simran singhal [Sat, 11 Mar 2017 14:26:40 +0000 (19:56 +0530)]
staging: iio: adis16201: Remove exceptional & on function name
Remove & from function pointers to conform to the style found elsewhere
in the file. Done using the following semantic patch
// <smpl>
@r@
identifier f;
@@
f(...) { ... }
@@
identifier r.f;
@@
- &f
+ f
// </smpl>
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
simran singhal [Sat, 11 Mar 2017 14:26:39 +0000 (19:56 +0530)]
staging: iio: adis16240: Remove exceptional & on function name
Remove & from function pointers to conform to the style found elsewhere
in the file. Done using the following semantic patch
// <smpl>
@r@
identifier f;
@@
f(...) { ... }
@@
identifier r.f;
@@
- &f
+ f
// </smpl>
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
simran singhal [Sat, 11 Mar 2017 14:26:38 +0000 (19:56 +0530)]
staging: iio: cdc: ad7152: Remove exceptional & on function name
Remove & from function pointers to conform to the style found elsewhere
in the file. Done using the following semantic patch
// <smpl>
@r@
identifier f;
@@
f(...) { ... }
@@
identifier r.f;
@@
- &f
+ f
// </smpl>
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
simran singhal [Sat, 11 Mar 2017 14:26:37 +0000 (19:56 +0530)]
staging: iio: cdc: ad7746: Remove exceptional & on function name
Remove & from function pointers to conform to the style found elsewhere
in the file. Done using the following semantic patch
// <smpl>
@r@
identifier f;
@@
f(...) { ... }
@@
identifier r.f;
@@
- &f
+ f
// </smpl>
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
simran singhal [Sat, 11 Mar 2017 14:26:36 +0000 (19:56 +0530)]
staging: iio: ad7780: Remove exceptional & on function name
Remove & from function pointers to conform to the style found elsewhere
in the file. Done using the following semantic patch
// <smpl>
@r@
identifier f;
@@
f(...) { ... }
@@
identifier r.f;
@@
- &f
+ f
// </smpl>
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
simran singhal [Sat, 11 Mar 2017 14:26:35 +0000 (19:56 +0530)]
staging: iio: ad7192: Remove exceptional & on function name
Remove & from function pointers to conform to the style found elsewhere
in the file. Done using the following semantic patch
// <smpl>
@r@
identifier f;
@@
f(...) { ... }
@@
identifier r.f;
@@
- &f
+ f
// </smpl>
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
sayli karnik [Wed, 8 Mar 2017 07:14:08 +0000 (12:44 +0530)]
staging: iio:
ade7754: Move contents of header file to source file
The contents of
ade7754.h are only used in
ade7754.c. Move the header
contents to the source file and delete the header file.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Alison Schofield [Thu, 9 Mar 2017 20:46:24 +0000 (12:46 -0800)]
staging: iio: ad9832: replace mlock with driver private lock
The IIO subsystem is redefining iio_dev->mlock to be used by
the IIO core only for protecting device operating mode changes.
ie. Changes between INDIO_DIRECT_MODE, INDIO_BUFFER_* modes.
In this driver, mlock was being used to protect hardware state
changes. Replace it with a lock in the devices global data.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Bo Yu [Fri, 10 Mar 2017 03:57:38 +0000 (22:57 -0500)]
Staging: iio: return expression instead of return ret
The following Coccinelle script was used to detect this:
@@
local idexpression ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
sayli karnik [Wed, 8 Mar 2017 09:46:38 +0000 (15:16 +0530)]
staging: iio:
ade7759: Move contents of header file to source file
The contents of
ade7759.h are only used in
ade7759.c. Move the header
contents to the source file and delete the header file.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Quentin Schulz [Tue, 13 Dec 2016 14:33:32 +0000 (15:33 +0100)]
iio: adc: add support for Allwinner SoCs ADC
The Allwinner SoCs all have an ADC that can also act as a touchscreen
controller and a thermal sensor. This patch adds the ADC driver which is
based on the MFD for the same SoCs ADC.
This also registers the thermal adc channel in the iio map array so
iio_hwmon could use it without modifying the Device Tree. This registers
the driver in the thermal framework.
The thermal sensor requires the IP to be in touchscreen mode to return
correct values. Therefore, if the user is continuously reading the ADC
channel(s), the thermal framework in which the thermal sensor is
registered will switch the IP in touchscreen mode to get a temperature
value and requires a delay of 100ms (because of the mode switching),
then the ADC will switch back to ADC mode and requires also a delay of
100ms. If the ADC readings are critical to user and the SoC temperature
is not, this driver is capable of not registering the thermal sensor in
the thermal framework and thus, "quicken" the ADC readings.
This driver probes on three different platform_device_id to take into
account slight differences (registers bit and temperature computation)
between Allwinner SoCs ADCs.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Wolfram Sang [Mon, 6 Feb 2017 16:54:11 +0000 (17:54 +0100)]
MAINTAINERS: drop broken reference to i2c/trivial-devices
Due to RST rework, the reference to i2c/trivial-devices was changed, but the
result is broken. However, let's just drop the whole reference, since it
doesn't make sense in the first place to reference this "global" file
for a single driver.
Fixes:
8c27ceff3604b2 ("docs: fix locations of several documents that got moved")
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Kevin Tsai <ktsai@capellamicro.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Wei Yongjun [Mon, 6 Feb 2017 16:41:42 +0000 (16:41 +0000)]
iio: adc: max11100: remove .owner field for driver
Remove .owner field if calls are used which set it automatically.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Alan Cox [Wed, 8 Mar 2017 11:39:20 +0000 (11:39 +0000)]
atomisp: USE_KMEM_CACHE is always defined so remove the dead code
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Wed, 8 Mar 2017 11:39:08 +0000 (11:39 +0000)]
atomisp: HRT_KERNEL is always defined so clean up the ifdef use
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Wed, 8 Mar 2017 11:39:59 +0000 (11:39 +0000)]
atomisp: trim unused mmgr code
This cuts it back to what is basically a few wrapper functions. At some point
we can kill most of these too by changing the callers.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Wed, 8 Mar 2017 11:39:48 +0000 (11:39 +0000)]
atomisp: HRT_CSIM is never defined
Remove the content that is guarded by this define
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Wed, 8 Mar 2017 11:39:38 +0000 (11:39 +0000)]
atomisp: __SP is never defined so scrub this ifdef
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Wed, 8 Mar 2017 11:39:29 +0000 (11:39 +0000)]
atomisp: comment out some unused defines
Once we are a bit more sure of their obsolescence they will be deleted
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Wed, 8 Mar 2017 12:21:51 +0000 (04:21 -0800)]
staging: bcm2835-camera: Remove explicit cache flush operations
The camera code has an explicit cache flush operation
which is not portable. Now that vc04_services is using portable
DMA APIs that already do the cache flushing, explicit flushes
should no longer be needed.
The one call to __cpuc_flush_dcache_area has been removed.
Testing:
The offical V2 camera for the RPI was tested on a RPI 3
running in 32 bit mode(armhf). The cheese application
and ffmpeg was used to view and stream video from the
camera. Nothing new seems to be broken without the
cache flushing.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrea Ghittino [Sat, 4 Mar 2017 17:20:50 +0000 (18:20 +0100)]
staging: unisys: fix sparse warnings
Sparse generates two warnings related to incorrect type in assignment.
This patch changes the types in the struct defined in unisys
Signed-off-by: Andrea Ghittino <aghittino@gmail.com>
Acked-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Fri, 3 Mar 2017 15:59:04 +0000 (21:29 +0530)]
staging: wlan-ng: Replace "the the " with "the"
This patch replace "the the " with "the". The replacement couldn't be
automated because sometimes the first "the" was meant to be another
word.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Fri, 3 Mar 2017 15:59:05 +0000 (21:29 +0530)]
staging: rtl8192u: Replace "the the " with "the"
This patch replace "the the " with "the". The replacement couldn't be
automated because sometimes the first "the" was meant to be another
word.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Fri, 3 Mar 2017 15:59:06 +0000 (21:29 +0530)]
staging: unisys: Replace "the the " with "the"
This patch replace "the the " with "the". The replacement couldn't be
automated because sometimes the first "the" was meant to be another
word.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: David Kershner <david.kershner@unisys.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Derek Robson [Sat, 11 Feb 2017 01:10:42 +0000 (14:10 +1300)]
Staging: media: platform: bcm2835 - style fix
Changed permissions to octal style
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Mon, 6 Mar 2017 19:57:41 +0000 (01:27 +0530)]
staging: bcm2835-audio: remove unused semaphores
This patch removes unused semaphores alsa_stream->buffers_update_sem
and alsa_stream->control_sem from struct bcm2835_alsa_stream
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Narcisa Ana Maria Vasile [Tue, 7 Mar 2017 15:22:03 +0000 (17:22 +0200)]
staging: bcm2835-camera: Replace ternary operator with min_t macro
Use macro min_t to get the minimum of two values for readability.
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Sat, 4 Mar 2017 17:41:01 +0000 (23:11 +0530)]
staging: comedi: Replace "is is" with "is"
This patch replace "is is " with "is". The replacement couldn't be
automated because sometimes the first "is" was meant to be another
word.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Sat, 4 Mar 2017 17:40:59 +0000 (23:10 +0530)]
staging: rtl8192u: Replace "is is" with "is"
This patch replace "is is " with "is". The replacement couldn't be
automated because sometimes the first "is" was meant to be another
word.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gargi Sharma [Thu, 2 Mar 2017 17:42:55 +0000 (23:12 +0530)]
staging: lustre: Remove lustre_eacl.h
The structures and the macros in the header file are not used
anywhere inside the kernel (verified by using grep). The structures
and macros were leftover from the patch
341f1f0affed1c24712f37c95bb654b3b33ab2c6 "staging: lustre: remove
remote client support". Also, removed the include statements for
lustre_eacl.h.
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gargi Sharma [Thu, 2 Mar 2017 16:57:15 +0000 (22:27 +0530)]
staging: lustre: lnet: Constify kernel_param_ops structure
The structure is used as an argument to module_param macro. This
macro calls a bunch of other macros and finally assigns the instance
of the kernel_param_ops structure to the const struct
kernel_param_ops* field of a variable of type kernel_param. Hence,
const can be added to the structure.
Coccinelle Script:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct kernel_param_ops i@p = { ... };
@ok1@
identifier r.i;
expression e;
position p;
@@
e = i@p
@script:python s@
i << r.i;
t;
@@
coccinelle.t = i[10:];
@ok2@
declarer name module_param;
expression e1,e2;
position p;
@@
module_param(e1,s.t@p,e2);
@bad@
position p != {r.p,ok1.p,ok2.p};
identifier r.i;
@@
e@i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct kernel_param_ops i = { ... };
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mario Bambagini [Wed, 1 Mar 2017 23:57:09 +0000 (00:57 +0100)]
staging: lustre: fix sparse warning about different address spaces
fixed the following sparse warning by adding proper cast:
drivers/staging//lustre/lustre/obdclass/obd_config.c:1055:74: warning: incorrect type in argument 2 (different address spaces)
drivers/staging//lustre/lustre/obdclass/obd_config.c:1055:74: expected char const [noderef] <asn:1>*<noident>
drivers/staging//lustre/lustre/obdclass/obd_config.c:1055:74: got char *[assigned] sval
Signed-off-by: Mario Bambagini <mario.bambagini@gmail.com>
Acked-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 7 Mar 2017 12:21:24 +0000 (13:21 +0100)]
staging: atomisp: fix include Makefile mess
Using LINUXINCLUDE is a very old hack, and doesn't play well with
building objects in a different directory than the kernel source is in.
So fix up the include file references to be relative to make it obvious
we are pulling in local include files, which need to get fixed up.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Sat, 4 Mar 2017 17:41:00 +0000 (23:11 +0530)]
staging: greybus: Replace "is is" with "is"
This patch replace "is is " with "is". The replacement couldn't be
automated because sometimes the first "is" was meant to be another
word.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan Bowie [Wed, 1 Mar 2017 10:46:30 +0000 (02:46 -0800)]
staging: greybus: loop_backtest: fixed consistent spacing style issue
Fixed incosistent spacing around arithmetic operator.
Signed-off-by: Jonathan Bowie <eudjtb@gmail.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Wed, 1 Mar 2017 12:36:30 +0000 (18:06 +0530)]
staging: dgnc: replace usleep_range with udelay
udelay is impelmented using a busy-wait loop and consumes CPU cycles
while usleep_range is implemented using interrupts.cls_flush_uart_write()
is called after a channel lock is acquired i.e. an atomic context.
Hence delay in this method should use udelay instead of usleep_range.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gargi Sharma [Sun, 5 Mar 2017 09:51:44 +0000 (15:21 +0530)]
staging: dgnc: Constify ktermios structure
The ktermios structure is a local default termios struct. All ports
are initially created with this termios. Since, the structure is
never modified, it can be declared as const.
Coccinelle Script:
@r disable optional_qualifier@
identifier s,i;
position p;
@@
static struct ktermios i@p = { ... };
@ok1@
identifier r.i;
expression e;
position p;
@@
e = i@p
@bad@
position p != {r.p,ok1.p};
identifier r.i;
@@
e@i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct ktermios i = { ... };
File Size before:
text data bss dec hex filename
25469 2048 256 27773 6c7d drivers/staging/dgnc/dgnc_tty.o
File Size after:
text data bss dec hex filename
25636 2016 256 27908 6d04 drivers/staging/dgnc/dgnc_tty.o
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arushi Singhal [Sat, 4 Mar 2017 15:57:40 +0000 (21:27 +0530)]
staging: wilc1000: Logical continuations should be on the previous line
This patch fixes the checkpatch issue:
CHECK: Logical continuations should be on the previous line.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arushi Singhal [Sat, 4 Mar 2017 15:57:39 +0000 (21:27 +0530)]
staging: wilc1000: function prototype argument should have identifier name
function prototype argument should have an identifier name as reported
by checkpatch.pl.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arushi Singhal [Sat, 4 Mar 2017 15:57:38 +0000 (21:27 +0530)]
staging: wilc1000: Alignment should match open parenthesis
Fix checkpatch issues: "CHECK: Alignment should match open parenthesis".
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Fri, 3 Mar 2017 18:20:53 +0000 (23:50 +0530)]
staging: bcm2835-audio: use min_t() macro instead of min()
use min_t() macro in place of min() to replace the two typecasts of min.
Change suggested by checkpatch script.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Fri, 3 Mar 2017 18:17:51 +0000 (23:47 +0530)]
staging: bcm2835-audio: match alignment with open parenthesis
Fix the following checkpatch warning issued on bcm2835-vchiq.c:
CHECK: Alignment should match open parenthesis
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Fri, 3 Mar 2017 18:17:32 +0000 (23:47 +0530)]
staging: bcm2835-audio: fix typo in word
fix typo in word receives
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Fri, 3 Mar 2017 18:17:16 +0000 (23:47 +0530)]
staging: bcm2835-audio: use braces on all arms of statement
Add braces on all arms of the if-else statements in bcm2835-vchiq.c to
comply with kernel coding style.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Fri, 3 Mar 2017 18:16:53 +0000 (23:46 +0530)]
staging: bcm2835-audio: remove spaces after cast
Remove instances of unnecessary blank space after cast in bcm2835-vchiq.c
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Thu, 2 Mar 2017 18:58:16 +0000 (00:28 +0530)]
staging: bcm2835-audio: replace printk(KERN_ERR...) with dev_err(...)
Use dev_err(... in place of printk(KERN_ERR ...
Problem found by checkpatch
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Thu, 2 Mar 2017 18:57:11 +0000 (00:27 +0530)]
staging: bcm2835-audio: remove extra blank line
Fix the warning: Blank lines aren't necessary after an open brace
'{' issued by checkpatch on bcm2835-ctl.c
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Thu, 2 Mar 2017 18:56:41 +0000 (00:26 +0530)]
staging: bcm2835-audio: use kernel preferred block commenting style
Fix block comment formatting to suppress the following warning thrown by
checkpatch: Block comments use a trailing */ on a separate line
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Thu, 2 Mar 2017 18:55:56 +0000 (00:25 +0530)]
staging: bcm2835-audio: move logical continuation to the same line
Keep logical continuations on the same line to improve code readability
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Thu, 2 Mar 2017 18:54:58 +0000 (00:24 +0530)]
staging: bcm2835-audio: remove space after cast
Remove instances of unnecessary blank space after cast in bcm2835-ctl.c
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Thu, 2 Mar 2017 03:10:49 +0000 (19:10 -0800)]
staging: bcm2835-camera: select BCM2835_VCHIQ rather then depending on it.
Change the camera's dependency on BCM2835_VCHIQ to a select
since camera support is typically more important to people
then base VCHIQ(which they may not even know what it's for).
Also, with a dependency the camera support would not be
visiable until VCHIQ is selected first, and that may
not be what most people would expect.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Thu, 2 Mar 2017 03:10:48 +0000 (19:10 -0800)]
staging: bcm2835-audio: select BCM2835_VCHIQ rather then depending on it.
Change the audio's dependency on BCM2835_VCHIQ to a select
since audio support is typically more important to people
then base VCHIQ(which they may not even know what it's for).
Also, with a dependency the audio support would not be
visiable until VCHIQ is selected first, and that may
not be what most people would expect.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Thu, 2 Mar 2017 03:10:47 +0000 (19:10 -0800)]
staging: vc04_services: Create new BCM_VIDEOCORE setting for VideoCore services.
Create a new memuconfig for Broadcom VideoCore services
since VideoCore is a general term used by Broadcom for a
large family of products that includes more then the BCM2835.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aishwarya Pant [Wed, 1 Mar 2017 18:24:01 +0000 (23:54 +0530)]
staging: bcm2835-camera: prefer allocating memory using sizeof(*ptr) instead of sizeof(struct type name)
Using sizeof(*ptr) instead of sizeof(struct type name) is more robust to
errors.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Narcisa Ana Maria Vasile [Wed, 1 Mar 2017 17:27:10 +0000 (19:27 +0200)]
staging: bcm2835-camera: Replace 'uint32_t' with kernel type u32
This patch fixes the checkpatch.pl issue:
CHECK: Prefer kernel type 'u32' over 'uint32_t'
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Narcisa Ana Maria Vasile [Wed, 1 Mar 2017 16:59:29 +0000 (18:59 +0200)]
staging: bcm2835-camera: Add spaces around '<<'
This patch fixes the checkpatch.pl issue:
CHECK: spaces preferred around that '<<' (ctx:VxV)
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Narcisa Ana Maria Vasile [Wed, 1 Mar 2017 16:59:16 +0000 (18:59 +0200)]
staging: bcm2835-camera: Remove unnecessary blank lines
This patch fixes the checkpatch.pl issue:
CHECK: Please don't use multiple blank lines
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Narcisa Ana Maria Vasile [Wed, 1 Mar 2017 15:37:27 +0000 (17:37 +0200)]
staging: vc04_services: bcm2835-camera: Remove unnecessary variable
Instead of storing the result, make the function return directly
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Mon, 6 Mar 2017 11:48:30 +0000 (11:48 +0000)]
atomisp: fix __udiv warning
Certain combinations of compiler and compiler options product an imx.o that
calls compiler helpers for a u64 divide. Use the do_div() call instead.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 6 Mar 2017 12:17:21 +0000 (13:17 +0100)]
Merge tag 'iio-for-4.12a' of git://git./linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of IIO new device support, features and cleanup for the 4.12 cycle.
Quite a bit of outreachy activity here with a driver from a current intern
and a number of cleanup patches as part of the next round.
Getting a pull request in early this cycle as it's looking like another large
cycle for IIO.
New device support
* adxl345
- initial device support. Note, once complete support is done the intent
is to superceded the driver in input/misc.
- bindings.
- conversion from i2c direct calls to regmap and driver split.
- spi support.
* chromeos light and proximity.
- new driver.
* devantech srf04 ultrasonic ranger
- new driver with device tree bindings.
* hid temperature
- new driver for environemntal temperature support from hid devices.
* max30102 oximeter
- new driver with device tree bindings.
* st lsm6dsx
- refactor and addition of device support for lsm6dsl and lsm6ds3h.
Staging graduation
* isl29028 including copyright notice update to reflect Brian's work.
* lpc32xx_adc.
* spear adc. It's not perfect and there are some datasheet disagreements, but
it works and is good enough to graduate.
New features
* documentation
- abi docs for in_proximity_sampling_frequency_available.
- generalise counting direction ABI docs as a second driver is going to
use them.
* hid-sensor-prox
- Add support for HID_USAGE_SENSOR_HUMAN_PRESENCE if used on a particular
device.
* isl29028
- runtime pm.
* meson-saradc
- switch from polling to interrupt mode and improved read_raw_sample function
to avoid unnecessary loop.
* tmp007
- interrupt and threshold event support.
Cleanups and minor fixes
* ad2s1210
- permissions to octal.
* ad7192
- permissions to octal.
- use BIT macro.
* ad9832
- merge header definitions into source file.
* ad9834
- merge header definitions into source file.
*
ade7753
- merge header definitions into source file.
- cleanup include ordering.
*
ade7854
- simplify return logic.
* adis16201
- merge header definitions into source file.
- rename _core.c to .c as there is nothing else.
* adis16203
- merge header definitions into source file.
- rename _core.c to .c as there is nothing else.
* adis16209
- merge header definitions into source file.
- rename _core.c to .c as there is nothing else.
* adis16240
- permissions to octal.
- merge header definitions into source file.
- rename _core.c to .c as there is nothing else.
* adt7136
- permissions to octal.
* cio-dac
- set missing parent device.
* documentation
- update version numbers on sysfs ABI for counter bits that didn't quite.
make 4.9.
* isl29028
- mdelay to msleep.
- incorrrect sleep time when taking first proximity reading.
* lmp91000
- set missing parent device.
* lpc32xx
- Consistent prefixes for defines.
- rename local state structure to _state.
* max30100
- set missing parent device.
* max30102
- set missing parent device.
* maxim-thermocouple
- set missing parent device.
* meter driver header
- permissions to octal.
* pulsedlight-lidar-lite-v2
- set missing parent device.
* quad-8
- set missing parent device.
* st104
- set missing parent device.
Other
* Mailmap
- update Matt Ranostay's email address to the Konsolko one.
Alan Cox [Mon, 6 Mar 2017 11:21:04 +0000 (11:21 +0000)]
atomisp2: unify some ifdef cases caused by format changes
The two drivers were originally merged by tools, and the tools didn't always
spot white space only changes. Fix a few of them found by zero-day and clean
up some more by hand.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Varsha Rao [Sat, 4 Mar 2017 17:24:09 +0000 (22:54 +0530)]
staging: media: atomisp: Replace NULL comparison.
Replaced x == NULL with !x, by using the following coccinelle script:
@disable is_null@
expression e;
@@
-e==NULL
+!e
This patch fixes the checkpatch issue.
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Varsha Rao [Sat, 4 Mar 2017 17:22:07 +0000 (22:52 +0530)]
staging: media: atomisp: Fixed typo.
Correct the spelling of initialize. This patch fixes the checkpatch
issue.
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Varsha Rao [Sat, 4 Mar 2017 17:20:07 +0000 (22:50 +0530)]
staging: media: atomisp: Use unsigned int instead of unsigned.
Usage of unsigned int is preferred over unsigned and this patch fixes the
checkpatch issue.
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Varsha Rao [Sat, 4 Mar 2017 17:19:29 +0000 (22:49 +0530)]
staging: media: atomisp: Removes the FSF mailing address.
This patch fixes the checkpatch issue by removing the Free Software
Foundation's mailing address from the sample GPL notice. Because the FSF
has changed address in the past, and may change again. Linux already
includes a copy of the GPL.
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Varsha Rao [Sat, 4 Mar 2017 17:15:35 +0000 (22:45 +0530)]
staging: media: atomisp: Fix block comments warning.
Used kernel preferred block commenting style, to fix the following
checkpatch issue:
WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Varsha Rao [Sat, 4 Mar 2017 17:12:00 +0000 (22:42 +0530)]
staging: media: atomisp: Replace 'uint32_t' with kernel type u32.
Replaced 'uint32_t' with kernel type u32, to fix the checkpatch issue.
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Varsha Rao [Sat, 4 Mar 2017 17:11:58 +0000 (22:41 +0530)]
staging: media: atomisp: Added spaces around arithmetic and bitwise operators.
Added spaces around arithmetic operators (/, *, +) and bitwise operators
(<<, >>), to fix the checkpatch issue.
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Varsha Rao [Sat, 4 Mar 2017 17:04:13 +0000 (22:34 +0530)]
staging: media: atomisp: Fix line over 80 characters.
Line over 80 characters are split to fix the following checkpatch issue:
WARNING: line over 80 characters
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Varsha Rao [Sat, 4 Mar 2017 17:04:02 +0000 (22:34 +0530)]
staging: media: atomisp: Removed unnecessary parentheses.
Removed parentheses on the right hand side of assignment, as they are
not required. The following coccinelle script is used to fix this issue:
@@
binary operator op = {<<,>>,+,/};
local idexpression id;
expression e1, e2;
@@
id =
-(
e1 op e2
-)
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kbuild test robot [Wed, 1 Mar 2017 22:17:49 +0000 (22:17 +0000)]
staging/atomisp: fix semicolon.cocci warnings
drivers/staging/media/atomisp/pci/atomisp2/./atomisp_v4l2.c:465:2-3: Unneeded semicolon
drivers/staging/media/atomisp/pci/atomisp2/./atomisp_v4l2.c:511:2-3: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>