Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170906a' into staging

migration pull 2017-09-06

# gpg: Signature made Wed 06 Sep 2017 19:39:23 BST
# gpg:                using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20170906a:
  migration: dump str in migrate_set_state trace
  snapshot/tests: Try loadvm twice
  migration: Reset rather than destroy main_thread_load_event
  runstate/migrate: Two more transitions
  host-utils: Simplify pow2ceil()
  host-utils: Proactively fix pow2floor(), switch to unsigned
  xbzrle: Drop unused cache_resize()
  migration: Report when bdrv_inactivate_all fails

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/rth/tags/pull-tgt-20170906' into staging

tcg generic translate loop v15

# gpg: Signature made Wed 06 Sep 2017 17:02:31 BST
# gpg:                using RSA key 0x64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tgt-20170906: (32 commits)
  target/arm: Perform per-insn cross-page check only for Thumb
  target/arm: Split out thumb_tr_translate_insn
  target/arm: Move ss check to init_disas_context
  target/arm: [a64] Move page and ss checks to init_disas_context
  target/arm: [tcg] Port to generic translation framework
  target/arm: [tcg,a64] Port to disas_log
  target/arm: [tcg] Port to disas_log
  target/arm: [tcg,a64] Port to tb_stop
  target/arm: [tcg] Port to tb_stop
  target/arm: [tcg,a64] Port to translate_insn
  target/arm: [tcg] Port to translate_insn
  target/arm: [tcg,a64] Port to breakpoint_check
  target/arm: [tcg,a64] Port to insn_start
  target/arm: [tcg] Port to insn_start
  target/arm: [tcg] Port to tb_start
  target/arm: [tcg,a64] Port to init_disas_context
  target/arm: [tcg] Port to init_disas_context
  target/arm: [tcg] Port to DisasContextBase
  target/i386: [tcg] Port to generic translation framework
  target/i386: [tcg] Port to disas_log
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20170906' into staging

Queued tcg patches

# gpg: Signature made Wed 06 Sep 2017 15:27:16 BST
# gpg:                using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC  16A4 AD12 70CC 4DD0 279B

* remotes/rth/tags/pull-tcg-20170906:
  tcg/s390: Use slbgr for setcond le and leu
  tcg/s390: Use load-on-condition-2 facility
  tcg/s390: Use distinct-operands facility
  tcg/s390: Merge ori+xori facilities check to tcg_target_op_def
  tcg/s390: Merge add2i facilities check to tcg_target_op_def
  tcg/s390: Merge muli facilities check to tcg_target_op_def
  tcg/s390: Merge cmpi facilities check to tcg_target_op_def
  tcg/s390: Fully convert tcg_target_op_def
  disas/i386: Add disassembly of rorx
  disas/i386: Add disassembly of vex.0f38.f5
  disas/i386: Fix disassembly of two-byte vex prefixes
  tcg: Implement implicit ordering semantics
  tcg: Add tcg target default memory ordering
  tcg: Remove support for ia64 as host

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

# gpg: Signature made Wed 06 Sep 2017 14:44:41 BST
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  qcow2: move qcow2_store_persistent_dirty_bitmaps() before cache flushing
  qemu-iotests: add 184 for throttle filter driver
  block: add throttle block filter driver
  block: convert ThrottleGroup to object with QOM
  block: tidy ThrottleGroupMember initializations
  block: add aio_context field in ThrottleGroupMember
  block: move ThrottleGroup membership to ThrottleGroupMember
  block: document semantics of bdrv_co_preadv|pwritev
  qcow: Check failure of bdrv_getlength() and bdrv_truncate()
  qcow: Change signature of get_cluster_offset()
  block: add default implementations for bdrv_co_get_block_status()
  block: remove bdrv_truncate callback in blkdebug
  block: remove unused bdrv_media_changed
  block: pass bdrv_* methods to bs->file by default in block filters

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/juanquintela/tags/tests/20170906' into staging

tests/next for 20170906

# gpg: Signature made Wed 06 Sep 2017 12:42:29 BST
# gpg:                using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg:                 aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* remotes/juanquintela/tags/tests/20170906:
  tests: Make vmgenid test compile
  tests: Use real size for iov tests

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

migration: dump str in migrate_set_state trace

Strings are more readable for debugging.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1504081950-2528-5-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Fixed up merge with 977c73

target/arm: Perform per-insn cross-page check only for Thumb

ARM is a fixed-length ISA and we can compute the page crossing
condition exactly once during init_disas_context.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/arm: Split out thumb_tr_translate_insn

We need not check for ARM vs Thumb state in order to dispatch
disassembly of every instruction.

Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/arm: Move ss check to init_disas_context

We can check for single-step just once.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/arm: [a64] Move page and ss checks to init_disas_context

Since AArch64 uses a fixed-width ISA, we can pre-compute the number of
insns remaining on the page.  Also, we can check for single-step once.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/arm: [tcg] Port to generic translation framework

Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002631325.22386.10348327185029496649.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/arm: [tcg,a64] Port to disas_log

Incrementally paves the way towards using the generic instruction translation
loop.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002606914.22386.15524101311003685068.stgit@frigg.lan>
[rth: Move tb->size computation and use that result.]
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/arm: [tcg] Port to disas_log

Incrementally paves the way towards using the generic instruction translation
loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Message-Id: <150002582711.22386.191527630537864599.stgit@frigg.lan>
[rth: Move tb->size computation and use that result.]
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/arm: [tcg,a64] Port to tb_stop

Incrementally paves the way towards using the generic instruction translation
loop.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002558503.22386.1149037590886263349.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/arm: [tcg] Port to tb_stop

Incrementally paves the way towards using the generic instruction translation
loop.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002534291.22386.13499916738708680298.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/arm: [tcg,a64] Port to translate_insn

Incrementally paves the way towards using the generic instruction translation
loop.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002510079.22386.10164419868911710218.stgit@frigg.lan>
[rth: Adjust for translate_insn interface change.]
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/arm: [tcg] Port to translate_insn

Incrementally paves the way towards using the generic instruction translation
loop.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002485863.22386.13949856269576226529.stgit@frigg.lan>
[rth: Adjust for translate_insn interface change.]
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/arm: [tcg,a64] Port to breakpoint_check

Incrementally paves the way towards using the generic instruction translation
loop.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002461630.22386.14827196109258040543.stgit@frigg.lan>
[rth: Use DISAS_TOO_MANY for "execute only one more" after bp.]
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/arm: [tcg,a64] Port to insn_start

Incrementally paves the way towards using the generic instruction translation
loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Message-Id: <150002413187.22386.156315485813606121.stgit@frigg.lan>
[rth: Use DISAS_TOO_MANY for "execute only one more" after bp.]
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/arm: [tcg] Port to insn_start

Incrementally paves the way towards using the generic instruction translation
loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Message-Id: <150002388959.22386.12439646324427589940.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/arm: [tcg] Port to tb_start

Incrementally paves the way towards using the generic instruction translation
loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Message-Id: <150002364681.22386.1701754996184325808.stgit@frigg.lan>
[rth: Adjust for tb_start interface change.]
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/arm: [tcg,a64] Port to init_disas_context

Incrementally paves the way towards using the generic instruction translation
loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Message-Id: <150002340430.22386.10889954302345646107.stgit@frigg.lan>
[rth: Adjust for max_insns interface change.]
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/arm: [tcg] Port to init_disas_context

Incrementally paves the way towards using the generic instruction translation
loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Message-Id: <150002316201.22386.12115078843605656029.stgit@frigg.lan>
[rth: Adjust for max_insns interface change.]
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/arm: [tcg] Port to DisasContextBase

Incrementally paves the way towards using the generic
instruction translation loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Message-Id: <150002291931.22386.11441154993010495674.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/i386: [tcg] Port to generic translation framework

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Tested-by: Emilio G. Cota <cota@braap.org>
Message-Id: <150002267714.22386.5095442346868988808.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/i386: [tcg] Port to disas_log

Incrementally paves the way towards using the generic instruction translation
loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <150002243497.22386.8888053391875656102.stgit@frigg.lan>
[rth: Move tb->size computation and use that result.]
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/i386: [tcg] Port to tb_stop

Incrementally paves the way towards using the generic instruction translation
loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <150002219289.22386.17959138704858928730.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/i386: [tcg] Port to translate_insn

Incrementally paves the way towards using the generic instruction translation
loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Message-Id: <150002195074.22386.16195894320027075398.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/i386: [tcg] Port to breakpoint_check

Incrementally paves the way towards using the generic instruction translation
loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Message-Id: <150002170871.22386.2172835658104140576.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/i386: [tcg] Port to insn_start

Incrementally paves the way towards using the generic instruction translation
loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Message-Id: <150002146647.22386.13380064201042141261.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/i386: [tcg] Port to init_disas_context

Incrementally paves the way towards using the generic instruction translation
loop.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002122448.22386.16854673576827449259.stgit@frigg.lan>
[rth: Adjust for max_insns interface change.]
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/i386: [tcg] Port to DisasContextBase

Incrementally paves the way towards using the generic instruction translation
loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Message-Id: <150002098212.22386.17313318023406046314.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>

tcg: Add generic translation framework

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002073981.22386.9870422422367410100.stgit@frigg.lan>
[rth: Moved max_insns adjustment from tb_start to init_disas_context.
Removed pc_next return from translate_insn.
Removed tcg_check_temp_count from generic loop.
Moved gen_io_end to exactly match gen_io_start.
Use qemu_log instead of error_report for temporary leaks.
Moved TB size/icount assignments before disas_log.]
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/arm: Delay check for magic kernel page

There's nothing magic about the exception that we generate in order
to execute the magic kernel page.  We can and should allow gdb to
set a breakpoint at this location.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target: [tcg] Use a generic enum for DISAS_ values

Used later. An enum makes expected values explicit and
bounds the value space of switches.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <150002049746.22386.2316077281615710615.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/arm: Use DISAS_NORETURN

Fold DISAS_EXC and DISAS_TB_JUMP into DISAS_NORETURN.

In both cases all following code is dead.  In the first
case because we have exited the TB via exception; in the
second case because we have exited the TB via goto_tb
and its associated machinery.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/i386: Use generic DISAS_* enumerators

This target is not sophisticated in its use of cleanups at the
end of the translation loop.  For the most part, any condition
that exits the TB is dealt with by emitting the exiting opcode
right then and there.  Therefore the only is_jmp indicator that
is needed is DISAS_NORETURN.

For two stack segment modifying cases, we have not yet exited
the TB (therefore DISAS_NORETURN feels wrong), but intend to exit.
The caller of gen_movl_seg_T0 currently checks for any non-zero
value, therefore DISAS_TOO_MANY seems acceptable for that usage.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

tcg: Add generic DISAS_NORETURN

This will allow some amount of cleanup to happen before
switching the backends over to enum DisasJumpType.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Richard Henderson <rth@twiddle.net>

tcg/s390: Use slbgr for setcond le and leu

Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>

tcg/s390: Use load-on-condition-2 facility

This allows LOAD HALFWORD IMMEDIATE ON CONDITION,
eliminating one insn in some common cases.

Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>

tcg/s390: Use distinct-operands facility

This allows using a 3-operand insn form for some arithmetic,
logicals and shifts.

Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>

tcg/s390: Merge ori+xori facilities check to tcg_target_op_def

Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>

tcg/s390: Merge add2i facilities check to tcg_target_op_def

Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>

tcg/s390: Merge muli facilities check to tcg_target_op_def

Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>

tcg/s390: Merge cmpi facilities check to tcg_target_op_def

Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>

tcg/s390: Fully convert tcg_target_op_def

Use a switch instead of searching a table.

Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

snapshot/tests: Try loadvm twice

It's legal to loadvm twice, modify the existing save/loadvm test
to do it twice.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170825141940.20740-3-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

disas/i386: Add disassembly of rorx

Signed-off-by: Richard Henderson <rth@twiddle.net>

disas/i386: Add disassembly of vex.0f38.f5

Which includes pext, pdep and bzhi.

Signed-off-by: Richard Henderson <rth@twiddle.net>

disas/i386: Fix disassembly of two-byte vex prefixes

Signed-off-by: Richard Henderson <rth@twiddle.net>

migration: Reset rather than destroy main_thread_load_event

migration_incoming_state_destroy doesn't really destroy, it cleans up.
After a loadvm it's called, but the loadvm command can be run twice,
and so destroying an init-once mutex breaks on the second loadvm.

Reported-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170825141940.20740-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

runstate/migrate: Two more transitions

There's a race if someone does a 'stop' near the end of migrate;
the migration process goes through two runstates:
    'finish migrate'
    'postmigrate'

If the user issues a 'stop' between the two we end up with invalid
state transitions.
Add the transitions as valid.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170804175011.21944-1-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

host-utils: Simplify pow2ceil()

Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1501148776-16890-4-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

host-utils: Proactively fix pow2floor(), switch to unsigned

The function's stated contract is simple enough: "round down to the
nearest power of 2".  Suggests the domain is the representable numbers
>= 1, because that's the smallest power of two.

The implementation doesn't check for domain errors, but returns
garbage instead:

* For negative arguments, pow2floor() returns -2^63, which is not even
  a power of two, let alone the nearest one.

  What sort of works is passing *unsigned* arguments >= 2^63.  The
  implicit conversion to signed is implementation defined, but
  commonly yields the (negative) two's complement.  pow2floor() then
  returns -2^63.  Callers that convert that back to unsigned get the
  correct value 2^63.

* For a zero argument, pow2floor() shifts right by 64.  Undefined
  behavior.  Common actual behavior is to shift by 0, yielding -2^63.

Fix by switching from int64_t to uint64_t and amending the contract to
map zero to zero.

Callers are fine with that:

* memory_access_size()

  This function makes no sense unless the argument is positive and the
  return value fits into int.

* raw_refresh_limits()

  Passes an int between 1 and BDRV_REQUEST_MAX_BYTES.

* iscsi_refresh_limits()

  Passes an integer between 0 and INT_MAX, converts the result to
  uint32_t.  Passing zero would be undefined behavior, but commonly
  yield zero.  The patch gives us the zero without the undefined
  behavior.

* cache_init()

  Passes a positive int64_t argument.

* xbzrle_cache_resize()

  Passes a positive int64_t argument (>= TARGET_PAGE_SIZE, actually).

* spapr_node0_size()

  Passes a positive uint64_t argument, and converts the result to
  hwaddr, i.e. uint64_t.

* spapr_populate_memory()

  Passes a positive hwaddr argument, and converts the result to
  hwaddr.

Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1501148776-16890-3-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

xbzrle: Drop unused cache_resize()

Unused since commit fd8cec XBZRLE: Fix qemu crash when resize the
xbzrle cache.

Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1501148776-16890-2-git-send-email-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Report when bdrv_inactivate_all fails

If the bdrv_inactivate_all fails near the end of the migration,
the migration will fail and often the only diagnostics in the log
are an I/O error which you can't distinguish from an error on
the socket connection.

Add an error so we know when it's actually a block problem.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170822170212.27347-1-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

qcow2: move qcow2_store_persistent_dirty_bitmaps() before cache flushing

After calling qcow2_inactivate(), all qcow2 caches must be flushed, but this
may not happen, because the last call qcow2_store_persistent_dirty_bitmaps()
can lead to marking l2/refcont cache as dirty.

Let's move qcow2_store_persistent_dirty_bitmaps() before the caсhe flushing
to fix it.

Cc: qemu-stable@nongnu.org
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qemu-iotests: add 184 for throttle filter driver

Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: add throttle block filter driver

block/throttle.c uses existing I/O throttle infrastructure inside a
block filter driver. I/O operations are intercepted in the filter's
read/write coroutines, and referred to block/throttle-groups.c

The driver can be used with the syntax
-drive driver=throttle,file.filename=foo.qcow2,throttle-group=bar

which registers the throttle filter node with the ThrottleGroup 'bar'. The
given group must be created beforehand with object-add or -object.

Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

tcg: Implement implicit ordering semantics

Currently, we cannot use mttcg for running strong memory model guests
on weak memory model hosts due to missing ordering semantics.

We implicitly generate fence instructions for stronger guests if an
ordering mismatch is detected. We generate fences only for the orders
for which fence instructions are necessary, for example a fence is not
necessary between a store and a subsequent load on x86 since its
absence in the guest binary tells that ordering need not be
ensured. Also note that if we find multiple subsequent fence
instructions in the generated IR, we combine them in the TCG
optimization pass.

This patch allows us to boot an x86 guest on ARM64 hosts using mttcg.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20170829063313.10237-4-bobby.prani@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tests: Make vmgenid test compile

Just make sure that nr_tables is size_t not int.
Once there, do the assert in the right place and be sure that we don't
have a division by zero.

Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
--

Drop the s/g_new0/g_malloc0/ change.
Avoid division by zero with assert (danp)

tests: Use real size for iov tests

We were using -1 instead of the real size because the functions check
what is bigger, size in bytes or the size of the iov.  Recent gcc's
barf at this.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
--

Remove comments about this feature.
Fix missing -1.

tcg: Add tcg target default memory ordering

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20170829063313.10237-3-bobby.prani@gmail.com>
[rth: Dropped ia64 hunk]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Remove support for ia64 as host

We threatened to remove ia64 as host in v2.9.0.  Its time has now come.

There are still some usages of defined(__ia64__) throughout the source
code that would be triggered if one were to enable TCI on an ia64 host.
Leave those alone for now.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

vhost-user: disable the *broken* subprocess tests

tests/vhost-user-test keeps failing on build-system since Aug 15:

  ERROR:tests/vhost-user-test.c:835:test_flags_mismatch: child process (/i386/vhost-user/flags-mismatch/subprocess [4836]) failed unexpectedly
...
  ERROR:tests/vhost-user-test.c:807:test_connect_fail: child process (/x86_64/vhost-user/connect-fail/subprocess [58910]) failed unexpectedly

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170905180602.28698-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Revert "kvm: use DIV_ROUND_UP"

This reverts commit 206a0fc75d5f54886c1b3f3a65782a75e36b6b97.

The linux-headers directory is for kernel headers which we keep in
sync with the upstream kernel via scripts/update-linux-headers.sh, so
we shouldn't be applying our code cleanups to it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

block: convert ThrottleGroup to object with QOM

ThrottleGroup is converted to an object. This will allow the future
throttle block filter drive easy creation and configuration of throttle
groups in QMP and cli.

A new QAPI struct, ThrottleLimits, is introduced to provide a shared
struct for all throttle configuration needs in QMP.

ThrottleGroups can be created via CLI as
    -object throttle-group,id=foo,x-iops-total=100,x-..
where x-* are individual limit properties. Since we can't add non-scalar
properties in -object this interface must be used instead. However,
setting these properties must be disabled after initialization because
certain combinations of limits are forbidden and thus configuration
changes should be done in one transaction. The individual properties
will go away when support for non-scalar values in CLI is implemented
and thus are marked as experimental.

ThrottleGroup also has a `limits` property that uses the ThrottleLimits
struct.  It can be used to create ThrottleGroups or set the
configuration in existing groups as follows:

{ "execute": "object-add",
  "arguments": {
    "qom-type": "throttle-group",
    "id": "foo",
    "props" : {
      "limits": {
          "iops-total": 100
      }
    }
  }
}
{ "execute" : "qom-set",
    "arguments" : {
        "path" : "foo",
        "property" : "limits",
        "value" : {
            "iops-total" : 99
        }
    }
}

This also means a group's configuration can be fetched with qom-get.

Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging

Some trivial fixes/cleanup and a fix to cause QEMU to error out gracefully
instead of aborting.

# gpg: Signature made Tue 05 Sep 2017 16:57:19 BST
# gpg:                using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg:                 aka "Greg Kurz <groug@free.fr>"
# gpg:                 aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg:                 aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg:                 aka "[jpeg image of size 3330]"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894  DBA2 02FC 3AEB 0101 DBC2

* remotes/gkurz/tags/for-upstream:
  virtfs: error out gracefully when mandatory suboptions are missing
  9pfs: local: clarify fchmodat_nofollow() implementation
  fsdev: fix memory leak in main()
  9pfs: avoid sign conversion error simplifying the code

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

virtfs: error out gracefully when mandatory suboptions are missing

We internally convert -virtfs to -fsdev/-device. If the user doesn't
provide the path or security_model suboptions, and the fsdev backend
requires them, we hit an assertion when populating the internal -fsdev
option:

util/qemu-option.c:547: opt_set: Assertion `opt->str' failed.
Aborted (core dumped)

Let's test the suboption presence on the command line before trying
to set it in the internal -fsdev option, and let the backend code
error out gracefully (ie, like it already does when the user passes
-fsdev on the command line).

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>

9pfs: local: clarify fchmodat_nofollow() implementation

Since fchmodat(2) on Linux doesn't support AT_SYMLINK_NOFOLLOW, we have to
implement it using workarounds. There are two different ways, depending on
whether the system supports O_PATH or not.

In the case O_PATH is supported, we rely on the behavhior of openat(2)
when passing O_NOFOLLOW | O_PATH and the file is a symbolic link. Even
if openat_file() already adds O_NOFOLLOW to the flags, this patch makes
it explicit that we need both creation flags to obtain the expected
behavior.

This is only cleanup, no functional change.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

# gpg: Signature made Tue 05 Sep 2017 14:28:52 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  block: document semantics of bdrv_co_preadv|pwritev
  qemu-iotests: use context managers for resource cleanup in 194
  iotests.py: add FilePath context manager
  qemu.py: make VM() a context manager

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

block: tidy ThrottleGroupMember initializations

Move the CoMutex and CoQueue inits inside throttle_group_register_tgm()
which is called whenever a ThrottleGroupMember is initialized. There's
no need for them to be separate.

Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: add aio_context field in ThrottleGroupMember

timer_cb() needs to know about the current Aio context of the throttle
request that is woken up. In order to make ThrottleGroupMember backend
agnostic, this information is stored in an aio_context field instead of
accessing it from BlockBackend.

Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: move ThrottleGroup membership to ThrottleGroupMember

This commit eliminates the 1:1 relationship between BlockBackend and
throttle group state.  Users will be able to create multiple throttle
nodes, each with its own throttle group state, in the future.  The
throttle group state cannot be per-BlockBackend anymore, it must be
per-throttle node. This is done by gathering ThrottleGroup membership
details from BlockBackendPublic into ThrottleGroupMember and refactoring
existing code to use the structure.

Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Merge remote-tracking branch 'remotes/berrange/tags/pull-qcrypto-20170905-1' into staging

Merge QEMU crypto 2017/09/05 v1

# gpg: Signature made Tue 05 Sep 2017 10:28:17 BST
# gpg:                using RSA key 0xBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E  8E3F BE86 EBB4 1510 4FDF

* remotes/berrange/tags/pull-qcrypto-20170905-1:
  crypto: fix test cert generation to not use SHA1 algorithm
  tests: fix incorrect size_t format in benchmark-crypto

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/berrange/tags/pull-qio-20170905-2' into staging

Merge QEMU I/O 2017/09/05 v2

# gpg: Signature made Tue 05 Sep 2017 13:22:36 BST
# gpg:                using RSA key 0xBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E  8E3F BE86 EBB4 1510 4FDF

* remotes/berrange/tags/pull-qio-20170905-2:
  io: fix check for handshake completion in TLS test
  io: add new qio_channel_{readv, writev, read, write}_all functions
  io: fix typo in docs comment for qio_channel_read
  util: remove the obsolete non-blocking connect
  io: fix temp directory used by test-io-channel-tls test

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

io: fix check for handshake completion in TLS test

The TLS I/O channel test had mistakenly used && instead
of || when checking for handshake completion. As a
result it could terminate the handshake process before
it had actually completed. This was harmless before but
changes in GNUTLS 3.6.0 exposed this bug and caused the
test suite to fail.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>

io: add new qio_channel_{readv, writev, read, write}_all functions

These functions wait until they are able to read / write the full
requested data buffer(s).

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>

io: fix typo in docs comment for qio_channel_read

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>

util: remove the obsolete non-blocking connect

The non-blocking connect mechanism is obsolete, and it doesn't
work well in inet connection, because it will call getaddrinfo
first and getaddrinfo will blocks on DNS lookups. Since commit
e65c67e4 & d984464e, the non-blocking connect of migration goes
through QIOChannel in a different manner(using a thread), and
nobody use this old non-blocking connect anymore.

Any newly written code which needs a non-blocking connect should
use the QIOChannel code, so we can drop NonBlockingConnectHandler
as a concept entirely.

Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>

fsdev: fix memory leak in main()

@rpath and @sock_name are not freed and leaked.

[groug, not really leaked since the program exits just after that. But it
 is always good practice to free allocated memory]

Signed-off-by: Zhipeng Lu <lu.zhipeng@zte.com.cn>
Signed-off-by: Greg Kurz <groug@kaod.org>

9pfs: avoid sign conversion error simplifying the code

(note this is how other functions also handle the errors).

hw/9pfs/9p.c:948:18: warning: Loss of sign in implicit conversion
        offset = err;
                 ^~~

Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Greg Kurz <groug@kaod.org>

block: document semantics of bdrv_co_preadv|pwritev

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170831105456.9558-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

block: document semantics of bdrv_co_preadv|pwritev

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qemu-iotests: use context managers for resource cleanup in 194

Switch from atexit.register() to a more elegant idiom of declaring
resources in a with statement:

  with FilePath('monitor.sock') as monitor_path,
       VM() as vm:
      ...

The files and VMs will be automatically cleaned up whether the test
passes or fails.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170824072202.26818-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

iotests.py: add FilePath context manager

The scratch/ (TEST_DIR) directory is not automatically cleaned up after
test execution.  It is the responsibility of tests to remove any files
they create.

A nice way of doing this is to declare files at the beginning of the
test and automatically remove them with a context manager:

  with iotests.FilePath('test.img') as img_path:
      qemu_img(...)
      qemu_io(...)
  # img_path is guaranteed to be deleted here

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170824072202.26818-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

qemu.py: make VM() a context manager

There are a number of ways to ensure that the QEMU process is shut down
when the test ends, including atexit.register(), try: finally:, or
unittest.teardown() methods.  All of these require extra code and the
programmer must remember to add vm.shutdown().

A nice solution is context managers:

  with VM(binary) as vm:
      ...
  # vm is guaranteed to be shut down here

Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 20170824072202.26818-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-signed' into staging

qemu-sparc update

# gpg: Signature made Mon 04 Sep 2017 18:45:26 BST
# gpg:                using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc-signed:
  apb: add busA qdev property to PBM PCI bridge
  apb: fix endianness for APB and PCI config accesses
  apb: fix up PCI bus nomenclature
  sun4u: expose fw_cfg and NVRAM on ebus PCI IO address space
  sun4u: switch to using qdev to instantiate fw_cfg interface
  sun4u: pass PCIDevice into pci_ebus_init() instead of PCIBus

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

apb: add busA qdev property to PBM PCI bridge

As future sun4u PCI topologies place the ebus containing the in-built devices
behind a PCI bridge, add a busA property to the PBM PCI bridge that is then
used to allow IO accesses by default.

This allows early fw_cfg/NVRAM/serial access to occur even before OpenBIOS
has had a chance to configure the PCI bridges.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

apb: fix endianness for APB and PCI config accesses

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

apb: fix up PCI bus nomenclature

Rather than referring to the PCI busses as bus2 and bus3, refer to them as
busA and busB as per the documentation. Also replace the long bus names with
the shorter pciA and pciB aliases (to make it easier to attach additional
devices to either from the command line).

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

sun4u: expose fw_cfg and NVRAM on ebus PCI IO address space

To allow future changes to the sun4u PCI topology.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-By: Artyom Tarasenko <atar4qemu@gmail.com>

sun4u: switch to using qdev to instantiate fw_cfg interface

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

sun4u: pass PCIDevice into pci_ebus_init() instead of PCIBus

In order to wire up the ebus PCI address spaces differently then we need
access to the underlying PCIDevice.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

qcow: Check failure of bdrv_getlength() and bdrv_truncate()

Omitting the check for whether bdrv_getlength() and bdrv_truncate()
failed meant that it was theoretically possible to return an
incorrect offset to the caller.  More likely, conditions for either
of these functions to fail would also cause one of our other calls
(such as bdrv_pread() or bdrv_pwrite_sync()) to also fail, but
auditing that we are safe is difficult compared to just patching
things to always forward on the error rather than ignoring it.

Use osdep.h macros instead of open-coded rounding while in the
area.

Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qcow: Change signature of get_cluster_offset()

The old signature has an ambiguous meaning for a return of 0:
either no allocation was requested or necessary, or an error
occurred (but any errno associated with the error is lost to
the caller, which then has to assume EIO).

Better is to follow the example of qcow2, by changing the
signature to have a separate return value that cleanly
distinguishes between failure and success, along with a
parameter that cleanly holds a 64-bit value.  Then update all
callers.

While auditing that all return paths return a negative errno
(rather than -1), I also simplified places where we can pass
NULL rather than a local Error that just gets thrown away.

Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: add default implementations for bdrv_co_get_block_status()

bdrv_co_get_block_status_from_file() and
bdrv_co_get_block_status_from_backing() set *file to bs->file and
bs->backing respectively, so that bdrv_co_get_block_status() can recurse
to them. Future block drivers won't have to duplicate code to implement
this.

Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: remove bdrv_truncate callback in blkdebug

Now that bdrv_truncate is passed to bs->file by default, remove the
callback from block/blkdebug.c and set is_filter to true. is_filter also gives
access to other callbacks that are forwarded automatically to bs->file for
filters.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: remove unused bdrv_media_changed

This function is not used anywhere, so remove it.

Markus Armbruster adds:
The i82078 floppy device model used to call bdrv_media_changed() to
implement its media change bit when backed by a host floppy.  This
went away in 21fcf36 "fdc: simplify media change handling".
Probably broke host floppy media change.  Host floppy pass-through
was dropped in commit f709623.  bdrv_media_changed() has never been
used for anything else.  Remove it.
(Source is Message-ID: <87y3ruaypm.fsf@dusky.pond.sub.org>)

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: pass bdrv_* methods to bs->file by default in block filters

The following functions fail if bs->drv is a filter and does not
implement them:

bdrv_probe_blocksizes
bdrv_probe_geometry
bdrv_truncate
bdrv_has_zero_init
bdrv_get_info

Instead, the call should be passed to bs->file if it exists, to allow
filter drivers to support those methods without implementing them. This
commit makes `drv->is_filter = true` imply that these callbacks will be
forwarded to bs->file by default, so disabling support for these
functions must be done explicitly.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>