media: em28xx: fix input name for Terratec AV 350

commit 15644bfa195bd166d0a5ed76ae2d587f719c3dac upstream.

Instead of using a register value, use an AMUX name, as otherwise
VIDIOC_G_AUDIO would fail.

Cc: stable@vger.kernel.org
Fixes: 766ed64de554 ("V4L/DVB (11827): Add support for Terratec Grabster AV350")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: em28xx: use a default format if TRY_FMT fails

commit f823ce2a1202d47110a7ef86b65839f0be8adc38 upstream.

Follow the V4L2 spec, as warned by v4l2-compliance:

warn: v4l2-test-formats.cpp(732): TRY_FMT cannot handle an invalid pixelformat.
warn: v4l2-test-formats.cpp(733): This may or may not be a problem. For more information see:

warn: v4l2-test-formats.cpp(734): http://www.mail-archive.com/linux-media@vger.kernel.org/msg56550.html

Cc: stable@vger.kernel.org
Fixes: bddcf63313c6 ("V4L/DVB (9927): em28xx: use a more standard way to specify video formats")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: fix xen_qlock_wait()

commit d3132b3860f6cf35ff7609a76bbcdbb814bd027c upstream.

Commit a856531951dc80 ("xen: make xen_qlock_wait() nestable")
introduced a regression for Xen guests running fully virtualized
(HVM or PVH mode). The Xen hypervisor wouldn't return from the poll
hypercall with interrupts disabled in case of an interrupt (for PV
guests it does).

So instead of disabling interrupts in xen_qlock_wait() use a nesting
counter to avoid calling xen_clear_irq_pending() in case
xen_qlock_wait() is nested.

Fixes: a856531951dc80 ("xen: make xen_qlock_wait() nestable")
Cc: stable@vger.kernel.org
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kgdboc: Passing ekgdboc to command line causes panic

commit 1bd54d851f50dea6af30c3e6ff4f3e9aab5558f9 upstream.

kgdboc_option_setup does not check input argument before passing it
to strlen. The argument would be a NULL pointer if "ekgdboc", without
its value, is set in command line and thus cause the following panic.

PANIC: early exception 0xe3 IP 10:ffffffff8fbbb620 error 0 cr2 0x0
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18-rc8+ #1
[    0.000000] RIP: 0010:strlen+0x0/0x20
...
[    0.000000] Call Trace
[    0.000000]  ? kgdboc_option_setup+0x9/0xa0
[    0.000000]  ? kgdboc_early_init+0x6/0x1b
[    0.000000]  ? do_early_param+0x4d/0x82
[    0.000000]  ? parse_args+0x212/0x330
[    0.000000]  ? rdinit_setup+0x26/0x26
[    0.000000]  ? parse_early_options+0x20/0x23
[    0.000000]  ? rdinit_setup+0x26/0x26
[    0.000000]  ? parse_early_param+0x2d/0x39
[    0.000000]  ? setup_arch+0x2f7/0xbf4
[    0.000000]  ? start_kernel+0x5e/0x4c2
[    0.000000]  ? load_ucode_bsp+0x113/0x12f
[    0.000000]  ? secondary_startup_64+0xa5/0xb0

This patch adds a check to prevent the panic.

Cc: stable@vger.kernel.org
Cc: jason.wessel@windriver.com
Cc: gregkh@linuxfoundation.org
Cc: jslaby@suse.com
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TC: Set DMA masks for devices

commit 3f2aa244ee1a0d17ed5b6c86564d2c1b24d1c96b upstream.

Fix a TURBOchannel support regression with commit 205e1b7f51e4
("dma-mapping: warn when there is no coherent_dma_mask") that caused
coherent DMA allocations to produce a warning such as:

defxx: v1.11 2014/07/01  Lawrence V. Stefani and others
tc1: DEFTA at MMIO addr = 0x1e900000, IRQ = 20, Hardware addr = 08-00-2b-a3-a3-29
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 dfx_dev_register+0x670/0x678
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc6 #2
Stack : ffffffff8009ffc0 fffffffffffffec0 0000000000000000 ffffffff80647650
        0000000000000000 0000000000000000 ffffffff806f5f80 ffffffffffffffff
        0000000000000000 0000000000000000 0000000000000001 ffffffff8065d4e8
        98000000031b6300 ffffffff80563478 ffffffff805685b0 ffffffffffffffff
        0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8
        0000000000000000 0000000000000009 ffffffff8053efd0 ffffffff806657d0
        0000000000000000 ffffffff803177f8 0000000000000000 ffffffff806d0000
        9800000003078000 980000000307b9e0 000000001e900000 ffffffff80067940
        0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8
        ffffffff805176c0 ffffffff8004dc78 0000000000000000 ffffffff80067940
        ...
Call Trace:
[<ffffffff8004dc78>] show_stack+0xa0/0x130
[<ffffffff80067940>] __warn+0x128/0x170
---[ end trace b1d1e094f67f3bb2 ]---

This is because the TURBOchannel bus driver fails to set the coherent
DMA mask for devices enumerated.

Set the regular and coherent DMA masks for TURBOchannel devices then,
observing that the bus protocol supports a 34-bit (16GiB) DMA address
space, by interpreting the value presented in the address cycle across
the 32 `ad' lines as a 32-bit word rather than byte address[1].  The
architectural size of the TURBOchannel DMA address space exceeds the
maximum amount of RAM any actual TURBOchannel system in existence may
have, hence both masks are the same.

This removes the warning shown above.

References:

[1] "TURBOchannel Hardware Specification", EK-369AA-OD-007B, Digital
    Equipment Corporation, January 1993, Section "DMA", pp. 1-15 -- 1-17

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20835/
Fixes: 205e1b7f51e4 ("dma-mapping: warn when there is no coherent_dma_mask")
Cc: stable@vger.kernel.org # 4.16+
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: OCTEON: fix out of bounds array access on CN68XX

commit c0fae7e2452b90c31edd2d25eb3baf0c76b400ca upstream.

The maximum number of interfaces is returned by
cvmx_helper_get_number_of_interfaces(), and the value is used to access
interface_port_count[]. When CN68XX support was added, we forgot
to increase the array size. Fix that.

Fixes: 2c8c3f0201333 ("MIPS: Octeon: Support additional interfaces on CN68XX")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20949/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v4.3+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/msi: Fix compile error on mpc83xx

commit 0f99153def98134403c9149128e59d3e1786cf04 upstream.

mpic_get_primary_version() is not defined when not using MPIC.
The compile error log like:

arch/powerpc/sysdev/built-in.o: In function `fsl_of_msi_probe':
fsl_msi.c:(.text+0x150c): undefined reference to `fsl_mpic_primary_get_version'

Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Reported-by: Radu Rendec <radu.rendec@gmail.com>
Fixes: 807d38b73b6 ("powerpc/mpic: Add get_version API both for internal and external use")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm ioctl: harden copy_params()'s copy_from_user() from malicious users

commit 800a7340ab7dd667edf95e74d8e4f23a17e87076 upstream.

In copy_params(), the struct 'dm_ioctl' is first copied from the user
space buffer 'user' to 'param_kernel' and the field 'data_size' is
checked against 'minimum_data_size' (size of 'struct dm_ioctl' payload
up to its 'data' member).  If the check fails, an error code EINVAL will be
returned.  Otherwise, param_kernel->data_size is used to do a second copy,
which copies from the same user-space buffer to 'dmi'.  After the second
copy, only 'dmi->data_size' is checked against 'param_kernel->data_size'.
Given that the buffer 'user' resides in the user space, a malicious
user-space process can race to change the content in the buffer between
the two copies.  This way, the attacker can inject inconsistent data
into 'dmi' (versus previously validated 'param_kernel').

Fix redundant copying of 'minimum_data_size' from user-space buffer by
using the first copy stored in 'param_kernel'.  Also remove the
'data_size' check after the second copy because it is now unnecessary.

Cc: stable@vger.kernel.org
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lockd: fix access beyond unterminated strings in prints

commit 93f38b6fae0ea8987e22d9e6c38f8dfdccd867ee upstream.

printk format used %*s instead of %.*s, so hostname_len does not limit
the number of bytes accessed from hostname.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: Fix an Oops in free_session()

commit bb6ad5572c0022e17e846b382d7413cdcf8055be upstream.

In call_xpt_users(), we delete the entry from the list, but we
do not reinitialise it. This triggers the list poisoning when
we later call unregister_xpt_user() in nfsd4_del_conns().

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4.1: Fix the r/wsize checking

commit 943cff67b842839f4f35364ba2db5c2d3f025d94 upstream.

The intention of nfs4_session_set_rwsize() was to cap the r/wsize to the
buffer sizes negotiated by the CREATE_SESSION. The initial code had a
bug whereby we would not check the values negotiated by nfs_probe_fsinfo()
(the assumption being that CREATE_SESSION will always negotiate buffer values
that are sane w.r.t. the server's preferred r/wsizes) but would only check
values set by the user in the 'mount' command.

The code was changed in 4.11 to _always_ set the r/wsize, meaning that we
now never use the server preferred r/wsizes. This is the regression that
this patch fixes.
Also rename the function to nfs4_session_limit_rwsize() in order to avoid
future confusion.

Fixes: 033853325fe3 (NFSv4.1 respect server's max size in CREATE_SESSION")
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genirq: Fix race on spurious interrupt detection

commit 746a923b863a1065ef77324e1e43f19b1a3eab5c upstream.

Commit 1e77d0a1ed74 ("genirq: Sanitize spurious interrupt detection of
threaded irqs") made detection of spurious interrupts work for threaded
handlers by:

a) incrementing a counter every time the thread returns IRQ_HANDLED, and
b) checking whether that counter has increased every time the thread is
   woken.

However for oneshot interrupts, the commit unmasks the interrupt before
incrementing the counter.  If another interrupt occurs right after
unmasking but before the counter is incremented, that interrupt is
incorrectly considered spurious:

time
 |  irq_thread()
 |    irq_thread_fn()
 |      action->thread_fn()
 |      irq_finalize_oneshot()
 |        unmask_threaded_irq()            /* interrupt is unmasked */
 |
 |                  /* interrupt fires, incorrectly deemed spurious */
 |
 |    atomic_inc(&desc->threads_handled); /* counter is incremented */
 v

This is observed with a hi3110 CAN controller receiving data at high volume
(from a separate machine sending with "cangen -g 0 -i -x"): The controller
signals a huge number of interrupts (hundreds of millions per day) and
every second there are about a dozen which are deemed spurious.

In theory with high CPU load and the presence of higher priority tasks, the
number of incorrectly detected spurious interrupts might increase beyond
the 99,900 threshold and cause disablement of the interrupt.

In practice it just increments the spurious interrupt count. But that can
cause people to waste time investigating it over and over.

Fix it by moving the accounting before the invocation of
irq_finalize_oneshot().

[ tglx: Folded change log update ]

Fixes: 1e77d0a1ed74 ("genirq: Sanitize spurious interrupt detection of threaded irqs")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Akshay Bhat <akshay.bhat@timesys.com>
Cc: Casey Fitzpatrick <casey.fitzpatrick@timesys.com>
Cc: stable@vger.kernel.org # v3.16+
Link: https://lkml.kernel.org/r/1dfd8bbd16163940648045495e3e9698e63b50ad.1539867047.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

printk: Fix panic caused by passing log_buf_len to command line

commit 277fcdb2cfee38ccdbe07e705dbd4896ba0c9930 upstream.

log_buf_len_setup does not check input argument before passing it to
simple_strtoull. The argument would be a NULL pointer if "log_buf_len",
without its value, is set in command line and thus causes the following
panic.

PANIC: early exception 0xe3 IP 10:ffffffffaaeacd0d error 0 cr2 0x0
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc4-yocto-standard+ #1
[    0.000000] RIP: 0010:_parse_integer_fixup_radix+0xd/0x70
...
[    0.000000] Call Trace:
[    0.000000]  simple_strtoull+0x29/0x70
[    0.000000]  memparse+0x26/0x90
[    0.000000]  log_buf_len_setup+0x17/0x22
[    0.000000]  do_early_param+0x57/0x8e
[    0.000000]  parse_args+0x208/0x320
[    0.000000]  ? rdinit_setup+0x30/0x30
[    0.000000]  parse_early_options+0x29/0x2d
[    0.000000]  ? rdinit_setup+0x30/0x30
[    0.000000]  parse_early_param+0x36/0x4d
[    0.000000]  setup_arch+0x336/0x99e
[    0.000000]  start_kernel+0x6f/0x4ee
[    0.000000]  x86_64_start_reservations+0x24/0x26
[    0.000000]  x86_64_start_kernel+0x6f/0x72
[    0.000000]  secondary_startup_64+0xa4/0xb0

This patch adds a check to prevent the panic.

Link: http://lkml.kernel.org/r/1538239553-81805-1-git-send-email-zhe.he@windriver.com
Cc: stable@vger.kernel.org
Cc: rostedt@goodmis.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: on kerberos mount if server doesn't specify auth type use krb5

commit 926674de6705f0f1dbf29a62fd758d0977f535d6 upstream.

Some servers (e.g. Azure) do not include a spnego blob in the SMB3
negotiate protocol response, so on kerberos mounts ("sec=krb5")
we can fail, as we expected the server to list its supported
auth types (OIDs in the spnego blob in the negprot response).
Change this so that on krb5 mounts we default to trying krb5 if the
server doesn't list its supported protocol mechanisms.

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: do not attempt cifs operation in smb3 query info error path

commit 1e77a8c204c9d1b655c61751b8ad0fde22421dbb upstream.

If backupuid mount option is sent, we can incorrectly retry
(on access denied on query info) with a cifs (FindFirst) operation
on an smb3 mount which causes the server to force the session close.

We set backup intent on open so no need for this fallback.

See kernel bugzilla 201435

Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: allow stats which track session and share reconnects to be reset

commit 2c887635cd6ab3af619dc2be94e5bf8f2e172b78 upstream.

Currently, "echo 0 > /proc/fs/cifs/Stats" resets all of the stats
except the session and share reconnect counts.  Fix it to
reset those as well.

CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

w1: omap-hdq: fix missing bus unregister at removal

commit a007734618fee1bf35556c04fa498d41d42c7301 upstream.

The bus master was not removed after unloading the module
or unbinding the driver. That lead to oopses like this

[  127.842987] Unable to handle kernel paging request at virtual address bf01d04c
[  127.850646] pgd = 70e3cd9a
[  127.853698] [bf01d04c] *pgd=8f908811, *pte=00000000, *ppte=00000000
[  127.860412] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM
[  127.866668] Modules linked in: bq27xxx_battery overlay [last unloaded: omap_hdq]
[  127.874542] CPU: 0 PID: 1022 Comm: w1_bus_master1 Not tainted 4.19.0-rc4-00001-g2d51da718324 #12
[  127.883819] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[  127.890441] PC is at 0xbf01d04c
[  127.893798] LR is at w1_search_process_cb+0x4c/0xfc
[  127.898956] pc : [<bf01d04c>]    lr : [<c05f9580>]    psr: a0070013
[  127.905609] sp : cf885f48  ip : bf01d04c  fp : ddf1e11c
[  127.911132] r10: cf8fe040  r9 : c05f8d00  r8 : cf8fe040
[  127.916656] r7 : 000000f0  r6 : cf8fe02c  r5 : cf8fe000  r4 : cf8fe01c
[  127.923553] r3 : c05f8d00  r2 : 000000f0  r1 : cf8fe000  r0 : dde1ef10
[  127.930450] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[  127.938018] Control: 10c5387d  Table: 8f8f0019  DAC: 00000051
[  127.944091] Process w1_bus_master1 (pid: 1022, stack limit = 0x9135699f)
[  127.951171] Stack: (0xcf885f48 to 0xcf886000)
[  127.955810] 5f40:                   cf8fe000 00000000 cf884000 cf8fe090 000003e8 c05f8d00
[  127.964477] 5f60: dde5fc34 c05f9700 ddf1e100 ddf1e540 cf884000 cf8fe000 c05f9694 00000000
[  127.973114] 5f80: dde5fc34 c01499a4 00000000 ddf1e540 c0149874 00000000 00000000 00000000
[  127.981781] 5fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000
[  127.990447] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  127.999114] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[  128.007781] [<c05f9580>] (w1_search_process_cb) from [<c05f9700>] (w1_process+0x6c/0x118)
[  128.016479] [<c05f9700>] (w1_process) from [<c01499a4>] (kthread+0x130/0x148)
[  128.024047] [<c01499a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
[  128.031677] Exception stack(0xcf885fb0 to 0xcf885ff8)
[  128.037017] 5fa0:                                     00000000 00000000 00000000 00000000
[  128.045684] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  128.054351] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[  128.061340] Code: bad PC value
[  128.064697] ---[ end trace af066e33c0e14119 ]---

Cc: <stable@vger.kernel.org>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: at91: fix wrong channel number in triggered buffer mode

commit aea835f2dc8a682942b859179c49ad1841a6c8b9 upstream.

When channels are registered, the hardware channel number is not the
actual iio channel number.
This is because the driver is probed with a certain number of accessible
channels. Some pins are routed and some not, depending on the description of
the board in the DT.
Because of that, channels 0,1,2,3 can correspond to hardware channels
2,3,4,5 for example.
In the buffered triggered case, we need to do the translation accordingly.
Fixed the channel number to stop reading the wrong channel.

Fixes: 0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: at91: fix acking DRDY irq on simple conversions

commit bc1b45326223e7e890053cf6266357adfa61942d upstream.

When doing simple conversions, the driver did not acknowledge the DRDY irq.
If this irq status is not acked, it will be left pending, and as soon as a
trigger is enabled, the irq handler will be called, it doesn't know why
this status has occurred because no channel is pending, and then it will go
int a irq loop and board will hang.
To avoid this situation, read the LCDR after a raw conversion is done.

Fixes: 0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: fix kernel/bounds.c 'W=1' warning

commit 6a32c2469c3fbfee8f25bcd20af647326650a6cf upstream.

Building any configuration with 'make W=1' produces a warning:

kernel/bounds.c:16:6: warning: no previous prototype for 'foo' [-Wmissing-prototypes]

When also passing -Werror, this prevents us from building any other files.
Nobody ever calls the function, but we can't make it 'static' either
since we want the compiler output.

Calling it 'main' instead however avoids the warning, because gcc
does not insist on having a declaration for main.

Link: http://lkml.kernel.org/r/20181005083313.2088252-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hugetlbfs: dirty pages as they are added to pagecache

commit 22146c3ce98962436e401f7b7016a6f664c9ffb5 upstream.

Some test systems were experiencing negative huge page reserve counts and
incorrect file block counts.  This was traced to /proc/sys/vm/drop_caches
removing clean pages from hugetlbfs file pagecaches.  When non-hugetlbfs
explicit code removes the pages, the appropriate accounting is not
performed.

This can be recreated as follows:
 fallocate -l 2M /dev/hugepages/foo
 echo 1 > /proc/sys/vm/drop_caches
 fallocate -l 2M /dev/hugepages/foo
 grep -i huge /proc/meminfo
   AnonHugePages:         0 kB
   ShmemHugePages:        0 kB
   HugePages_Total:    2048
   HugePages_Free:     2047
   HugePages_Rsvd:    18446744073709551615
   HugePages_Surp:        0
   Hugepagesize:       2048 kB
   Hugetlb:         4194304 kB
 ls -lsh /dev/hugepages/foo
   4.0M -rw-r--r--. 1 root root 2.0M Oct 17 20:05 /dev/hugepages/foo

To address this issue, dirty pages as they are added to pagecache.  This
can easily be reproduced with fallocate as shown above.  Read faulted
pages will eventually end up being marked dirty.  But there is a window
where they are clean and could be impacted by code such as drop_caches.
So, just dirty them all as they are added to the pagecache.

Link: http://lkml.kernel.org/r/b5be45b8-5afe-56cd-9482-28384699a049@oracle.com
Fixes: 6bda666a03f0 ("hugepages: fold find_or_alloc_pages into huge_no_page()")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Mihcla Hocko <mhocko@suse.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: fix showing large 'violations' or 'runtime_measurements_count'

commit 1e4c8dafbb6bf72fb5eca035b861e39c5896c2b7 upstream.

The 12 character temporary buffer is not necessarily long enough to hold
a 'long' value.  Increase it.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: lrw - Fix out-of bounds access on counter overflow

commit fbe1a850b3b1522e9fc22319ccbbcd2ab05328d2 upstream.

When the LRW block counter overflows, the current implementation returns
128 as the index to the precomputed multiplication table, which has 128
entries. This patch fixes it to return the correct value (127).

Fixes: 64470f1b8510 ("[CRYPTO] lrw: Liskov Rivest Wagner, a tweakable narrow block cipher mode")
Cc: <stable@vger.kernel.org> # 2.6.20+
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

signal/GenWQE: Fix sending of SIGKILL

commit 0ab93e9c99f8208c0a1a7b7170c827936268c996 upstream.

The genweq_add_file and genwqe_del_file by caching current without
using reference counting embed the assumption that a file descriptor
will never be passed from one process to another.  It even embeds the
assumption that the the thread that opened the file will be in
existence when the process terminates.   Neither of which are
guaranteed to be true.

Therefore replace caching the task_struct of the opener with
pid of the openers thread group id.  All the knowledge of the
opener is used for is as the target of SIGKILL and a SIGKILL
will kill the entire process group.

Rename genwqe_force_sig to genwqe_terminate, remove it's unncessary
signal argument, update it's ownly caller, and use kill_pid
instead of force_sig.

The work force_sig does in changing signal handling state is not
relevant to SIGKILL sent as SEND_SIG_PRIV.  The exact same processess
will be killed just with less work, and less confusion.  The work done
by force_sig is really only needed for handling syncrhonous
exceptions.

It will still be possible to cause genwqe_device_remove to wait
8 seconds by passing a file descriptor to another process but
the possible user after free is fixed.

Fixes: eaf4722d4645 ("GenWQE Character device and DDCB queue")
Cc: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Frank Haverkamp <haver@linux.vnet.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Eberhard S. Amann <esa@linux.vnet.ibm.com>
Cc: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add Device IDs for Intel GPU "spurious interrupt" quirk

commit d0c9606b31a21028fb5b753c8ad79626292accfd upstream.

Add Device IDs to the Intel GPU "spurious interrupt" quirk table.

For these devices, unplugging the VGA cable and plugging it in again causes
spurious interrupts from the IGD.  Linux eventually disables the interrupt,
but of course that disables any other devices sharing the interrupt.

The theory is that this is a VGA BIOS defect: it should have disabled the
IGD interrupt but failed to do so.

See f67fd55fa96f ("PCI: Add quirk for still enabled interrupts on Intel
Sandy Bridge GPUs") and 7c82126a94e6 ("PCI: Add new ID for Intel GPU
"spurious interrupt" quirk") for some history.

[bhelgaas: See link below for discussion about how to fix this more
generically instead of adding device IDs for every new Intel GPU.  I hope
this is the last patch to add device IDs.]

Link: https://lore.kernel.org/linux-pci/1537974841-29928-1-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v3.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: hiddev: fix potential Spectre v1

commit f11274396a538b31bc010f782e05c2ce3f804c13 upstream.

uref->usage_index can be indirectly controlled by userspace, hence leading
to a potential exploitation of the Spectre variant 1 vulnerability.

This field is used as an array index by the hiddev_ioctl_usage() function,
when 'cmd' is either HIDIOCGCOLLECTIONINDEX, HIDIOCGUSAGES or
HIDIOCSUSAGES.

For cmd == HIDIOCGCOLLECTIONINDEX case, uref->usage_index is compared to
field->maxusage and then used as an index to dereference field->usage
array. The same thing happens to the cmd == HIDIOC{G,S}USAGES cases, where
uref->usage_index is checked against an array maximum value and then it is
used as an index in an array.

This is a summary of the HIDIOCGCOLLECTIONINDEX case, which matches the
traditional Spectre V1 first load:

copy_from_user(uref, user_arg, sizeof(*uref))
if (uref->usage_index >= field->maxusage)
goto inval;
i = field->usage[uref->usage_index].collection_index;
return i;

This patch fixes this by sanitizing field uref->usage_index before using it
to index field->usage (HIDIOCGCOLLECTIONINDEX) or field->value in
HIDIOC{G,S}USAGES arrays, thus, avoiding speculation in the first load.

Cc: <stable@vger.kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
v2: Contemplate cmd == HIDIOC{G,S}USAGES case
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: initialize retries variable in ext4_da_write_inline_data_begin()

commit 625ef8a3acd111d5f496d190baf99d1a815bd03e upstream.

Variable retries is not initialized in ext4_da_write_inline_data_begin()
which can lead to nondeterministic number of retries in case we hit
ENOSPC. Initialize retries to zero as we do everywhere else.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fixes: bc0ca9df3b2a ("ext4: retry allocation when inline->extent conversion failed")
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2_meta: ->mount() can get NULL dev_name

commit 3df629d873f8683af6f0d34dfc743f637966d483 upstream.

get in sync with mount_bdev() handling of the same

Reported-by: syzbot+c54f8e94e6bba03b04e9@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: fix use after free in jbd2_log_do_checkpoint()

commit ccd3c4373eacb044eb3832966299d13d2631f66f upstream.

The code cleaning transaction's lists of checkpoint buffers has a bug
where it increases bh refcount only after releasing
journal->j_list_lock. Thus the following race is possible:

CPU0 CPU1
jbd2_log_do_checkpoint()
jbd2_journal_try_to_free_buffers()
  __journal_try_to_free_buffer(bh)
  ...
  while (transaction->t_checkpoint_io_list)
  ...
    if (buffer_locked(bh)) {

<-- IO completes now, buffer gets unlocked -->

      spin_unlock(&journal->j_list_lock);
    spin_lock(&journal->j_list_lock);
    __jbd2_journal_remove_checkpoint(jh);
    spin_unlock(&journal->j_list_lock);
  try_to_free_buffers(page);
      get_bh(bh) <-- accesses freed bh

Fix the problem by grabbing bh reference before unlocking
journal->j_list_lock.

Fixes: dc6e8d669cf5 ("jbd2: don't call get_bh() before calling __jbd2_journal_remove_checkpoint()")
Fixes: be1158cc615f ("jbd2: fold __process_buffer() into jbd2_log_do_checkpoint()")
Reported-by: syzbot+7f4a27091759e2fe7453@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libnvdimm: Hold reference on parent while scheduling async init

commit b6eae0f61db27748606cc00dafcfd1e2c032f0a5 upstream.

Unlike asynchronous initialization in the core we have not yet associated
the device with the parent, and as such the device doesn't hold a reference
to the parent.

In order to resolve that we should be holding a reference on the parent
until the asynchronous initialization has completed.

Cc: <stable@vger.kernel.org>
Fixes: 4d88a97aa9e8 ("libnvdimm: ...base ... infrastructure")
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/ipv4: defensive cipso option parsing

commit 076ed3da0c9b2f88d9157dbe7044a45641ae369e upstream.

commit 40413955ee26 ("Cipso: cipso_v4_optptr enter infinite loop") fixed
a possible infinite loop in the IP option parsing of CIPSO. The fix
assumes that ip_options_compile filtered out all zero length options and
that no other one-byte options beside IPOPT_END and IPOPT_NOOP exist.
While this assumption currently holds true, add explicit checks for zero
length and invalid length options to be safe for the future. Even though
ip_options_compile should have validated the options, the introduction of
new one-byte options can still confuse this code without the additional
checks.

Signed-off-by: Stefan Nuernberger <snu@amazon.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Simon Veith <sveith@amazon.de>
Cc: stable@vger.kernel.org
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: make xen_qlock_wait() nestable

commit a856531951dc8094359dfdac21d59cee5969c18e upstream.

xen_qlock_wait() isn't safe for nested calls due to interrupts. A call
of xen_qlock_kick() might be ignored in case a deeper nesting level
was active right before the call of xen_poll_irq():

CPU 1:                                   CPU 2:
spin_lock(lock1)
                                         spin_lock(lock1)
                                         -> xen_qlock_wait()
                                            -> xen_clear_irq_pending()
                                            Interrupt happens
spin_unlock(lock1)
-> xen_qlock_kick(CPU 2)
spin_lock_irqsave(lock2)
                                         spin_lock_irqsave(lock2)
                                         -> xen_qlock_wait()
                                            -> xen_clear_irq_pending()
                                               clears kick for lock1
                                            -> xen_poll_irq()
spin_unlock_irq_restore(lock2)
-> xen_qlock_kick(CPU 2)
                                            wakes up
                                         spin_unlock_irq_restore(lock2)
                                         IRET
                                           resumes in xen_qlock_wait()
                                           -> xen_poll_irq()
                                           never wakes up

The solution is to disable interrupts in xen_qlock_wait() and not to
poll for the irq in case xen_qlock_wait() is called in nmi context.

Cc: stable@vger.kernel.org
Cc: Waiman.Long@hp.com
Cc: peterz@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: fix race in xen_qlock_wait()

commit 2ac2a7d4d9ff4e01e36f9c3d116582f6f655ab47 upstream.

In the following situation a vcpu waiting for a lock might not be
woken up from xen_poll_irq():

CPU 1:                CPU 2:                      CPU 3:
takes a spinlock
                      tries to get lock
                      -> xen_qlock_wait()
frees the lock
-> xen_qlock_kick(cpu2)
                        -> xen_clear_irq_pending()

takes lock again
                                                  tries to get lock
                                                  -> *lock = _Q_SLOW_VAL
                        -> *lock == _Q_SLOW_VAL ?
                        -> xen_poll_irq()
frees the lock
-> xen_qlock_kick(cpu3)

And cpu 2 will sleep forever.

This can be avoided easily by modifying xen_qlock_wait() to call
xen_poll_irq() only if the related irq was not pending and to call
xen_clear_irq_pending() only if it was pending.

Cc: stable@vger.kernel.org
Cc: Waiman.Long@hp.com
Cc: peterz@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: Restore functionality to xen vtpm driver.

commit e487a0f52301293152a6f8c4e217f2a11dd808e3 upstream.

Functionality of the xen-tpmfront driver was lost secondary to
the introduction of xenbus multi-page support in commit ccc9d90a9a8b
("xenbus_client: Extend interface to support multi-page ring").

In this commit pointer to location of where the shared page address
is stored was being passed to the xenbus_grant_ring() function rather
then the address of the shared page itself. This resulted in a situation
where the driver would attach to the vtpm-stubdom but any attempt
to send a command to the stub domain would timeout.

A diagnostic finding for this regression is the following error
message being generated when the xen-tpmfront driver probes for a
device:

<3>vtpm vtpm-0: tpm_transmit: tpm_send: error -62

<3>vtpm vtpm-0: A TPM error (-62) occurred attempting to determine
the timeouts

This fix is relevant to all kernels from 4.1 forward which is the
release in which multi-page xenbus support was introduced.

Daniel De Graaf formulated the fix by code inspection after the
regression point was located.

Fixes: ccc9d90a9a8b ("xenbus_client: Extend interface to support multi-page ring")
Signed-off-by: Dr. Greg Wettstein <greg@enjellic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[boris: Updated commit message, added Fixes tag]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org # v4.1+
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

xen-swiotlb: use actually allocated size on check physical continuous

commit 7250f422da0480d8512b756640f131b9b893ccda upstream.

xen_swiotlb_{alloc,free}_coherent() allocate/free memory based on the
order of the pages and not size argument (bytes). This is inconsistent with
range_straddles_page_boundary and memset which use the 'size' value,
which may lead to not exchanging memory with Xen (range_straddles_page_boundary()
returned true). And then the call to xen_swiotlb_free_coherent() would
actually try to exchange the memory with Xen, leading to the kernel
hitting an BUG (as the hypercall returned an error).

This patch fixes it by making the 'size' variable be of the same size
as the amount of memory allocated.

CC: stable@vger.kernel.org
Signed-off-by: Joe Jin <joe.jin@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Christoph Helwig <hch@lst.de>
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: John Sobecki <john.sobecki@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Check the non-cached stream buffers more explicitly

[ Upstream commit 78c9be61c3a5cd9e2439fd27a5ffad73a81958c7 ]

Introduce a new flag, uc_buffer, to indicate that the controller
requires the non-cached pages for stream buffers, either as a
chip-specific requirement or specified via snoop=0 option.
This improves the code-readability.

Also, this patch fixes the incorrect behavior for C-Media chip where
the stream buffers were never handled as non-cached due to the check
of driver_type even if you pass snoop=0 option.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: dma-jz4780: Return error if not probed from DT

[ Upstream commit 54f919a04cf221bc1601d1193682d4379dacacbd ]

The driver calls clk_get() with the clock name set to NULL, which means
that the driver could only work when probed from devicetree. From now
on, we explicitly require the driver to be probed from devicetree.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

signal: Always deliver the kernel's SIGKILL and SIGSTOP to a pid namespace init

[ Upstream commit 3597dfe01d12f570bc739da67f857fd222a3ea66 ]

Instead of playing whack-a-mole and changing SEND_SIG_PRIV to
SEND_SIG_FORCED throughout the kernel to ensure a pid namespace init
gets signals sent by the kernel, stop allowing a pid namespace init to
ignore SIGKILL or SIGSTOP sent by the kernel.  A pid namespace init is
only supposed to be able to ignore signals sent from itself and
children with SIG_DFL.

Fixes: 921cf9f63089 ("signals: protect cinit from unblocked SIG_DFL signals")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Correct soft lockup when running mds diagnostics

[ Upstream commit 0ef01a2d95fd62bb4f536e7ce4d5e8e74b97a244 ]

When running an mds diagnostic that passes frames with the switch, soft
lockups are detected. The driver is in a CQE processing loop and has
sufficient amount of traffic that it never exits the ring processing routine,
thus the "lockup".

Cap the number of elements in the work processing routine to 64 elements. This
ensures that the cpu will be given up and the handler reschedule to process
additional items.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uio: ensure class is registered before devices

[ Upstream commit ae61cf5b9913027c6953a79ed3894da4f47061bd ]

When both uio and the uio drivers are built in the kernel, it is possible
for a driver to register devices before the uio class is registered.

This may result in a NULL pointer dereference later on in
get_device_parent() when accessing the class glue_dirs spinlock.

The trace looks like that:

Unable to handle kernel NULL pointer dereference at virtual address 00000140
[...]
[<ffff0000089cc234>] _raw_spin_lock+0x14/0x48
[<ffff0000084f56bc>] device_add+0x154/0x6a0
[<ffff0000084f5e48>] device_create_groups_vargs+0x120/0x128
[<ffff0000084f5edc>] device_create+0x54/0x60
[<ffff0000086e72c0>] __uio_register_device+0x120/0x4a8
[<ffff000008528b7c>] jaguar2_pci_probe+0x2d4/0x558
[<ffff0000083fc18c>] local_pci_probe+0x3c/0xb8
[<ffff0000083fd81c>] pci_device_probe+0x11c/0x180
[<ffff0000084f88bc>] driver_probe_device+0x22c/0x2d8
[<ffff0000084f8a24>] __driver_attach+0xbc/0xc0
[<ffff0000084f69fc>] bus_for_each_dev+0x4c/0x98
[<ffff0000084f81b8>] driver_attach+0x20/0x28
[<ffff0000084f7d08>] bus_add_driver+0x1b8/0x228
[<ffff0000084f93c0>] driver_register+0x60/0xf8
[<ffff0000083fb918>] __pci_register_driver+0x40/0x48

Return EPROBE_DEFER in that case so the driver can register the device
later.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver/dma/ioat: Call del_timer_sync() without holding prep_lock

[ Upstream commit cfb03be6c7e8a1591285849c361d67b09f5149f7 ]

The following lockdep splat was observed:

[ 1222.241750] ======================================================
[ 1222.271301] WARNING: possible circular locking dependency detected
[ 1222.301060] 4.16.0-10.el8+5.x86_64+debug #1 Not tainted
[ 1222.326659] ------------------------------------------------------
[ 1222.356565] systemd-shutdow/1 is trying to acquire lock:
[ 1222.382660]  ((&ioat_chan->timer)){+.-.}, at: [<00000000f71e1a28>] del_timer_sync+0x5/0xf0
[ 1222.422928]
[ 1222.422928] but task is already holding lock:
[ 1222.451743]  (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma]
   :
[ 1223.524987] Chain exists of:
[ 1223.524987]   (&ioat_chan->timer) --> &(&ioat_chan->cleanup_lock)->rlock --> &(&ioat_chan->prep_lock)->rlock
[ 1223.524987]
[ 1223.594082]  Possible unsafe locking scenario:
[ 1223.594082]
[ 1223.622630]        CPU0                    CPU1
[ 1223.645080]        ----                    ----
[ 1223.667404]   lock(&(&ioat_chan->prep_lock)->rlock);
[ 1223.691535]                                lock(&(&ioat_chan->cleanup_lock)->rlock);
[ 1223.728657]                                lock(&(&ioat_chan->prep_lock)->rlock);
[ 1223.765122]   lock((&ioat_chan->timer));
[ 1223.784095]
[ 1223.784095]  *** DEADLOCK ***
[ 1223.784095]
[ 1223.813492] 4 locks held by systemd-shutdow/1:
[ 1223.834677]  #0:  (reboot_mutex){+.+.}, at: [<0000000056d33456>] SYSC_reboot+0x10f/0x300
[ 1223.873310]  #1:  (&dev->mutex){....}, at: [<00000000258dfdd7>] device_shutdown+0x1c8/0x660
[ 1223.913604]  #2:  (&dev->mutex){....}, at: [<0000000068331147>] device_shutdown+0x1d6/0x660
[ 1223.954000]  #3:  (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma]

In the ioat_shutdown() function:

spin_lock_bh(&ioat_chan->prep_lock);
set_bit(IOAT_CHAN_DOWN, &ioat_chan->state);
del_timer_sync(&ioat_chan->timer);
spin_unlock_bh(&ioat_chan->prep_lock);

According to the synchronization rule for the del_timer_sync() function,
the caller must not hold locks which would prevent completion of the
timer's handler.

The timer structure has its own lock that manages its synchronization.
Setting the IOAT_CHAN_DOWN bit should prevent other CPUs from
trying to use that device anyway, there is probably no need to call
del_timer_sync() while holding the prep_lock. So the del_timer_sync()
call is now moved outside of the prep_lock critical section to prevent
the circular lock dependency.

Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: chipidea: Prevent unbalanced IRQ disable

[ Upstream commit 8b97d73c4d72a2abf58f8e49062a7ee1e5f1334e ]

The ChipIdea IRQ is disabled before scheduling the otg work and
re-enabled on otg work completion. However if the job is already
scheduled we have to undo the effect of disable_irq int order to
balance the IRQ disable-depth value.

Fixes: be6b0c1bd0be ("usb: chipidea: using one inline function to cover queue work operations")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MD: fix invalid stored role for a disk

[ Upstream commit d595567dc4f0c1d90685ec1e2e296e2cad2643ac ]

If we change the number of array's device after device is removed from array,
then add the device back to array, we can see that device is added as active
role instead of spare which we expected.

Please see the below link for details:
https://marc.info/?l=linux-raid&m=153736982015076&w=2

This is caused by that we prefer to use device's previous role which is
recorded by saved_raid_disk, but we should respect the new number of
conf->raid_disks since it could be changed after device is removed.

Reported-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Tested-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Acked-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix argument checking in EXT4_IOC_MOVE_EXT

[ Upstream commit f18b2b83a727a3db208308057d2c7945f368e625 ]

If the starting block number of either the source or destination file
exceeds the EOF, EXT4_IOC_MOVE_EXT should return EINVAL.

Also fixed the helper function mext_check_coverage() so that if the
logical block is beyond EOF, make it return immediately, instead of
looping until the block number wraps all the away around.  This takes
long enough that if there are multiple threads trying to do pound on
an the same inode doing non-sensical things, it can end up triggering
the kernel's soft lockup detector.

Reported-by: syzbot+c61979f6f2cba5cb3c06@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivated

[ Upstream commit 0d6d0d62d9505a9816716aa484ebd0b04c795063 ]

For TPM 1.2 chips the system setup utility allows to set the TPM device in
one of the following states:

  * Active: Security chip is functional
  * Inactive: Security chip is visible, but is not functional
  * Disabled: Security chip is hidden and is not functional

When choosing the "Inactive" state, the TPM 1.2 device is enumerated and
registered, but sending TPM commands fail with either TPM_DEACTIVATED or
TPM_DISABLED depending if the firmware deactivated or disabled the TPM.

Since these TPM 1.2 error codes don't have special treatment, inactivating
the TPM leads to a very noisy kernel log buffer that shows messages like
the following:

  tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
  tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
  tpm tpm0: TPM is disabled/deactivated (0x6)
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
  ima: No TPM chip found, activating TPM-bypass! (rc=6)
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting get random

Let's just suppress error log messages for the TPM_{DEACTIVATED,DISABLED}
return codes, since this is expected when the TPM 1.2 is set to Inactive.

In that case the kernel log is cleaner and less confusing for users, i.e:

  tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
  tpm tpm0: TPM is disabled/deactivated (0x6)
  ima: No TPM chip found, activating TPM-bypass! (rc=6)

Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: megaraid_sas: fix a missing-check bug

[ Upstream commit 47db7873136a9c57c45390a53b57019cf73c8259 ]

In megasas_mgmt_compat_ioctl_fw(), to handle the structure
compat_megasas_iocpacket 'cioc', a user-space structure megasas_iocpacket
'ioc' is allocated before megasas_mgmt_ioctl_fw() is invoked to handle
the packet. Since the two data structures have different fields, the data
is copied from 'cioc' to 'ioc' field by field. In the copy process,
'sense_ptr' is prepared if the field 'sense_len' is not null, because it
will be used in megasas_mgmt_ioctl_fw(). To prepare 'sense_ptr', the
user-space data 'ioc->sense_off' and 'cioc->sense_off' are copied and
saved to kernel-space variables 'local_sense_off' and 'user_sense_off'
respectively. Given that 'ioc->sense_off' is also copied from
'cioc->sense_off', 'local_sense_off' and 'user_sense_off' should have the
same value. However, 'cioc' is in the user space and a malicious user can
race to change the value of 'cioc->sense_off' after it is copied to
'ioc->sense_off' but before it is copied to 'user_sense_off'. By doing
so, the attacker can inject different values into 'local_sense_off' and
'user_sense_off'. This can cause undefined behavior in the following
execution, because the two variables are supposed to be same.

This patch enforces a check on the two kernel variables 'local_sense_off'
and 'user_sense_off' to make sure they are the same after the copy. In
case they are not, an error code EINVAL will be returned.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: esp_scsi: Track residual for PIO transfers

[ Upstream commit fd47d919d0c336e7c22862b51ee94927ffea227a ]

If a target disconnects during a PIO data transfer the command may fail
when the target reconnects:

scsi host1: DMA length is zero!
scsi host1: cur adr[04380000] len[00000000]

The scsi bus is then reset. This happens because the residual reached
zero before the transfer was completed.

The usual residual calculation relies on the Transfer Count registers.
That works for DMA transfers but not for PIO transfers. Fix the problem
by storing the PIO transfer residual and using that to correctly
calculate bytes_sent.

Fixes: 6fe07aaffbf0 ("[SCSI] m68k: new mac_esp scsi driver")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: schedule hardware restart if WMI command times out

[ Upstream commit a9911937e7d332761e8c4fcbc7ba0426bdc3956f ]

When running in AP mode, ath10k sometimes suffers from TX credit
starvation. The issue is hard to reproduce and shows up once in a
few days, but has been repeatedly seen with QCA9882 and a large
range of firmwares, including 10.2.4.70.67.

Once the module is in this state, TX credits are never replenished,
which results in "SWBA overrun" errors, as no beacons can be sent.
Even worse, WMI commands run in a timeout while holding the conf
mutex for three seconds each, making any further operations slow
and the whole system unresponsive.

The firmware/driver never recovers from that state automatically,
and triggering TX flush or warm restarts won't work over WMI. So
issue a hardware restart if a WMI command times out due to missing
TX credits. This implies a connectivity outage of about 1.4s in AP
mode, but brings back the interface and the whole system to a usable
state. WMI command timeouts have not been seen in absent of this
specific issue, so taking such drastic actions seems legitimate.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: ssbi-gpio: Fix pm8xxx_pin_config_get() to be compliant

[ Upstream commit b432414b996d32a1bd9afe2bd595bd5729c1477f ]

If you look at "pinconf-groups" in debugfs for ssbi-gpio you'll notice
it looks like nonsense.

The problem is fairly well described in commit 1cf86bc21257 ("pinctrl:
qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and
commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be
compliant"), but it was pointed out that ssbi-gpio has the same
problem.  Let's fix it there too.

Fixes: b4c45fe974bc ("pinctrl: qcom: ssbi: Family A gpio & mpp drivers")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: spmi-mpp: Fix pmic_mpp_config_get() to be compliant

[ Upstream commit 0d5b476f8f57fcb06c45fe27681ac47254f63fd2 ]

If you look at "pinconf-groups" in debugfs for ssbi-mpp you'll notice
it looks like nonsense.

The problem is fairly well described in commit 1cf86bc21257 ("pinctrl:
qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and
commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be
compliant"), but it was pointed out that ssbi-mpp has the same
problem.  Let's fix it there too.

NOTE: in case it's helpful to someone reading this, the way to tell
whether to do the -EINVAL or not is to look at the PCONFDUMP for a
given attribute.  If the last element (has_arg) is false then you need
to do the -EINVAL trick.

ALSO NOTE: it seems unlikely that the values returned when we try to
get PIN_CONFIG_BIAS_PULL_UP will actually be printed since "has_arg"
is false for that one, but I guess it's still fine to return different
values so I kept doing that.  It seems like another driver (ssbi-gpio)
uses a custom attribute (PM8XXX_QCOM_PULL_UP_STRENGTH) for something
similar so maybe a future change should do that here too.

Fixes: cfb24f6ebd38 ("pinctrl: Qualcomm SPMI PMIC MPP pin controller driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: qcom: spmi-mpp: Fix drive strength setting

[ Upstream commit 89c68b102f13f123aaef22b292526d6b92501334 ]

It looks like we parse the drive strength setting here, but never
actually write it into the hardware to update it. Parse the setting and
then write it at the end of the pinconf setting function so that it
actually sticks in the hardware.

Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode")
Cc: Doug Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / LPSS: Add alternative ACPI HIDs for Cherry Trail DMA controllers

[ Upstream commit 240714061c58e6b1abfb3322398a7634151c06cb ]

Bay and Cherry Trail DSTDs represent a different set of devices depending
on which OS the device think it is booting. One set of decices for Windows
and another set of devices for Android which targets the Android-x86 Linux
kernel fork (which e.g. used to have its own display driver instead of
using the i915 driver).

Which set of devices we are actually going to get is out of our control,
this is controlled by the ACPI OSID variable, which gets either set through
an EFI setup option, or sometimes is autodetected. So we need to support
both.

This commit adds support for the 80862286 and 808622C0 ACPI HIDs which we
get for the first resp. second DMA controller on Cherry Trail devices when
OSID is set to Android.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kprobes: Return error if we fail to reuse kprobe instead of BUG_ON()

[ Upstream commit 819319fc93461c07b9cdb3064f154bd8cfd48172 ]

Make reuse_unused_kprobe() to return error code if
it fails to reuse unused kprobe for optprobe instead
of calling BUG_ON().

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/153666124040.21306.14150398706331307654.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: qcom: spmi-mpp: Fix err handling of pmic_mpp_set_mux

[ Upstream commit 69f8455f6cc78fa6cdf80d0105d7a748106271dc ]

'ret' should be returned while pmic_mpp_write_mode_ctl fails.

Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: boot: Fix EFI stub alignment

[ Upstream commit 9c1442a9d039a1a3302fa93e9a11001c5f23b624 ]

We currently align the end of the compressed image to a multiple of
16.  However, the PE-COFF header included in the EFI stub says that
the file alignment is 32 bytes, and when adding an EFI signature to
the file it must first be padded to this alignment.

sbsigntool commands warn about this:

  warning: file-aligned section .text extends beyond end of file
  warning: checksum areas are greater than image size. Invalid section table?

Worse, pesign -at least when creating a detached signature- uses the
hash of the unpadded file, resulting in an invalid signature if
padding is required.

Avoid both these problems by increasing alignment to 32 bytes when
CONFIG_EFI_STUB is enabled.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: btbcm: Add entry for BCM4335C0 UART bluetooth

[ Upstream commit a357ea098c9605f60d92a66a9073f56ce25726da ]

This patch adds the device ID for the AMPAK AP6335 combo module used
in the 1st generation WeTek Hub Android/LibreELEC HTPC box. The WiFI
chip identifies itself as BCM4339, while Bluetooth identifies itself
as BCM4335 (rev C0):

```
[    4.864248] Bluetooth: hci0: BCM: chip id 86
[    4.866388] Bluetooth: hci0: BCM: features 0x2f
[    4.889317] Bluetooth: hci0: BCM4335C0
[    4.889332] Bluetooth: hci0: BCM4335C0 (003.001.009) build 0000
[    9.778383] Bluetooth: hci0: BCM4335C0 (003.001.009) build 0268
```

Output from hciconfig:

```
hci0: Type: Primary  Bus: UART
BD Address: 43:39:00:00:1F:AC  ACL MTU: 1021:8  SCO MTU: 64:1
UP RUNNING
RX bytes:7567 acl:234 sco:0 events:386 errors:0
TX bytes:53844 acl:77 sco:0 commands:304 errors:0
Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH SNIFF
Link mode: SLAVE ACCEPT
Name: 'HUB'
Class: 0x0c0000
Service Classes: Rendering, Capturing
Device Class: Miscellaneous,
HCI Version: 4.0 (0x6)  Revision: 0x10c
LMP Version: 4.0 (0x6)  Subversion: 0x6109
Manufacturer: Broadcom Corporation (15)
```

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-pci-o2micro: Add quirk for O2 Micro dev 0x8620 rev 0x01

[ Upstream commit 5169894982bb67486d93cc1e10151712bb86bcb6 ]

This device reports SDHCI_CLOCK_INT_STABLE even though it's not
ready to take SDHCI_CLOCK_CARD_EN. The symptom is that reading
SDHCI_CLOCK_CONTROL after enabling the clock shows absence of the
bit from the register (e.g. expecting 0x0000fa07 = 0x0000fa03 |
SDHCI_CLOCK_CARD_EN but only observed the first operand).

mmc1: Timeout waiting for hardware cmd interrupt.
mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc1: sdhci: Sys addr:  0x00000000 | Version:  0x00000603
mmc1: sdhci: Blk size:  0x00000000 | Blk cnt:  0x00000000
mmc1: sdhci: Argument:  0x00000000 | Trn mode: 0x00000000
mmc1: sdhci: Present:   0x01ff0001 | Host ctl: 0x00000001
mmc1: sdhci: Power:     0x0000000f | Blk gap:  0x00000000
mmc1: sdhci: Wake-up:   0x00000000 | Clock:    0x0000fa03
mmc1: sdhci: Timeout:   0x00000000 | Int stat: 0x00000000
mmc1: sdhci: Int enab:  0x00ff0083 | Sig enab: 0x00ff0083
mmc1: sdhci: AC12 err:  0x00000000 | Slot int: 0x00000000
mmc1: sdhci: Caps:      0x25fcc8bf | Caps_1:   0x00002077
mmc1: sdhci: Cmd:       0x00000000 | Max curr: 0x005800c8
mmc1: sdhci: Resp[0]:   0x00000000 | Resp[1]:  0x00000000
mmc1: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
mmc1: sdhci: Host ctl2: 0x00000008
mmc1: sdhci: ADMA Err:  0x00000000 | ADMA Ptr: 0x00000000
mmc1: sdhci: ============================================

The problem happens during wakeup from S3. Adding a delay quirk
after power up reliably fixes the problem.

Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Cleanup trace-event-info 'tdata' leak

[ Upstream commit faedbf3fd19f2511a39397f76359e4cc6ee93072 ]

Free tracing_data structure in tracing_data_get() error paths.

Fixes the following coverity complaint:

  Error: RESOURCE_LEAK (CWE-772):
  leaked_storage: Variable "tdata" going out of scope leaks the storage

Signed-off-by: Sanskriti Sharma <sansharm@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Link: http://lkml.kernel.org/r/1538490554-8161-3-git-send-email-sansharm@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Free temporary 'sys' string in read_event_files()

[ Upstream commit 1e44224fb0528b4c0cc176bde2bb31e9127eb14b ]

For each system in a given pevent, read_event_files() reads in a
temporary 'sys' string.  Be sure to free this string before moving onto
to the next system and/or leaving read_event_files().

Fixes the following coverity complaints:

  Error: RESOURCE_LEAK (CWE-772):

  tools/perf/util/trace-event-read.c:343: overwrite_var: Overwriting
  "sys" in "sys = read_string()" leaks the storage that "sys" points to.

  tools/perf/util/trace-event-read.c:353: leaked_storage: Variable "sys"
  going out of scope leaks the storage it points to.

Signed-off-by: Sanskriti Sharma <sansharm@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Link: http://lkml.kernel.org/r/1538490554-8161-6-git-send-email-sansharm@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tun: Consistently configure generic netdev params via rtnetlink

[ Upstream commit df52eab23d703142c766ac00bdb8db19d71238d0 ]

Configuring generic network device parameters on tun will fail in
presence of IFLA_INFO_KIND attribute in IFLA_LINKINFO nested attribute
since tun_validate() always return failure.

This can be visualized with following ip-link(8) command sequences:

  # ip link set dev tun0 group 100
  # ip link set dev tun0 group 100 type tun
  RTNETLINK answers: Invalid argument

with contrast to dummy and veth drivers:

  # ip link set dev dummy0 group 100
  # ip link set dev dummy0 type dummy

  # ip link set dev veth0 group 100
  # ip link set dev veth0 group 100 type veth

Fix by returning zero in tun_validate() when @data is NULL that is
always in case since rtnl_link_ops->maxtype is zero in tun driver.

Fixes: f019a7a594d9 ("tun: Implement ip link del tunXXX")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

swim: fix cleanup on setup error

[ Upstream commit 1448a2a5360ae06f25e2edc61ae070dff5c0beb4 ]

If we fail to allocate the request queue for a disk, we still need to
free that disk, not just the previous ones. Additionally, we need to
cleanup the previous request queues.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ataflop: fix error handling during setup

[ Upstream commit 71327f547ee3a46ec5c39fdbbd268401b2578d0e ]

Move queue allocation next to disk allocation to fix a couple of issues:

- If add_disk() hasn't been called, we should clear disk->queue before
  calling put_disk().
- If we fail to allocate a request queue, we still need to put all of
  the disks, not just the ones that we allocated queues for.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

locking/lockdep: Fix debug_locks off performance problem

[ Upstream commit 9506a7425b094d2f1d9c877ed5a78f416669269b ]

It was found that when debug_locks was turned off because of a problem
found by the lockdep code, the system performance could drop quite
significantly when the lock_stat code was also configured into the
kernel. For instance, parallel kernel build time on a 4-socket x86-64
server nearly doubled.

Further analysis into the cause of the slowdown traced back to the
frequent call to debug_locks_off() from the __lock_acquired() function
probably due to some inconsistent lockdep states with debug_locks
off. The debug_locks_off() function did an unconditional atomic xchg
to write a 0 value into debug_locks which had already been set to 0.
This led to severe cacheline contention in the cacheline that held
debug_locks.  As debug_locks is being referenced in quite a few different
places in the kernel, this greatly slow down the system performance.

To prevent that trashing of debug_locks cacheline, lock_acquired()
and lock_contended() now checks the state of debug_locks before
proceeding. The debug_locks_off() function is also modified to check
debug_locks before calling __debug_locks_off().

Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1539913518-15598-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: ftrace: Add synthetic event syntax testcase

[ Upstream commit ba0e41ca81b935b958006c7120466e2217357827 ]

Add a testcase to check the syntax and field types for
synthetic_events interface.

Link: http://lkml.kernel.org/r/153986838264.18251.16627517536956299922.stgit@devbox
Acked-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qla3xxx: Remove overflowing shift statement

[ Upstream commit 8c3bf9b62b667456a57aefcf1689e826df146159 ]

Clang currently warns:

drivers/net/ethernet/qlogic/qla3xxx.c:384:24: warning: signed shift
result (0xF00000000) requires 37 bits to represent, but 'int' only has
32 bits [-Wshift-overflow]
                    ((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data));
                      ~~~~~~~~~~~~~~ ^  ~~
1 warning generated.

The warning is certainly accurate since ISP_NVRAM_MASK is defined as
(0x000F << 16) which is then shifted by 16, resulting in 64424509440,
well above UINT_MAX.

Given that this is the only location in this driver where ISP_NVRAM_MASK
is shifted again, it seems likely that ISP_NVRAM_MASK was originally
defined without a shift and during the move of the shift to the
definition, this statement wasn't properly removed (since ISP_NVRAM_MASK
is used in the statenent right above this). Only the maintainers can
confirm this since this statment has been here since the driver was
first added to the kernel.

Link: https://github.com/ClangBuiltLinux/linux/issues/127
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Remove second definition of fpu in __fpu__restore_sig()

[ Upstream commit 6aa676761d4c1acfa31320e55fa1f83f3fcbbc7a ]

Commit:

  c5bedc6847c3b ("x86/fpu: Get rid of PF_USED_MATH usage, convert it to fpu->fpstate_active")

introduced the 'fpu' variable at top of __restore_xstate_sig(),
which now shadows the other definition:

  arch/x86/kernel/fpu/signal.c:318:28: warning: symbol 'fpu' shadows an earlier one
  arch/x86/kernel/fpu/signal.c:271:20: originally declared here

Remove the shadowed definition of 'fpu', as the two definitions are the same.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: c5bedc6847c3b ("x86/fpu: Get rid of PF_USED_MATH usage, convert it to fpu->fpstate_active")
Link: http://lkml.kernel.org/r/20181016202525.29437-3-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc: Fix single-pcr perf event counter management.

[ Upstream commit cfdc3170d214046b9509183fe9b9544dc644d40b ]

It is important to clear the hw->state value for non-stopped events
when they are added into the PMU.  Otherwise when the event is
scheduled out, we won't read the counter because HES_UPTODATE is still
set.  This breaks 'perf stat' and similar use cases, causing all the
events to show zero.

This worked for multi-pcr because we make explicit sparc_pmu_start()
calls in calculate_multiple_pcrs().  calculate_single_pcr() doesn't do
this because the idea there is to accumulate all of the counter
settings into the single pcr value.  So we have to add explicit
hw->state handling there.

Like x86, we use the PERF_HES_ARCH bit to track truly stopped events
so that we don't accidently start them on a reload.

Related to all of this, sparc_pmu_start() is missing a userpage update
so add it.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kconfig: Fall back to ticket spinlocks

Sebastian writes:

"""
We reproducibly observe cache line starvation on a Core2Duo E6850 (2
cores), a i5-6400 SKL (4 cores) and on a NXP LS2044A ARM Cortex-A72 (4
cores).

The problem can be triggered with a v4.9-RT kernel by starting

    cyclictest -S -p98 -m  -i2000 -b 200

and as "load"

    stress-ng --ptrace 4

The reported maximal latency is usually less than 60us. If the problem
triggers then values around 400us, 800us or even more are reported. The
upperlimit is the -i parameter.

Reproduction with 4.9-RT is almost immediate on Core2Duo, ARM64 and SKL,
but it took 7.5 hours to trigger on v4.14-RT on the Core2Duo.

Instrumentation show always the picture:

CPU0                                         CPU1
=> do_syscall_64                              => do_syscall_64
=> SyS_ptrace                                   => syscall_slow_exit_work
=> ptrace_check_attach                          => ptrace_do_notify / rt_read_unlock
=> wait_task_inactive                              rt_spin_lock_slowunlock()
   -> while task_running()                         __rt_mutex_unlock_common()
  /   check_task_state()                           mark_wakeup_next_waiter()
 |     raw_spin_lock_irq(&p->pi_lock);             raw_spin_lock(&current->pi_lock);
 |     .                                               .
 |     raw_spin_unlock_irq(&p->pi_lock);               .
  \  cpu_relax()                                       .
   -                                                   .
    *IRQ*                                          <lock acquired>

In the error case we observe that the while() loop is repeated more than
5000 times which indicates that the pi_lock can be acquired. CPU1 on the
other side does not make progress waiting for the same lock with interrupts
disabled.

This continues until an IRQ hits CPU0. Once CPU0 starts processing the IRQ
the other CPU is able to acquire pi_lock and the situation relaxes.
"""

This matches with the observeration for v4.4-rt on a Core2Duo E6850:

CPU 0:

- no progress for a very long time in rt_mutex_dequeue_pi):

stress-n-1931    0d..11  5060.891219: function:             __try_to_take_rt_mutex
stress-n-1931    0d..11  5060.891219: function:                rt_mutex_dequeue
stress-n-1931    0d..21  5060.891220: function:                rt_mutex_enqueue_pi
stress-n-1931    0....2  5060.891220: signal_generate:      sig=17 errno=0 code=262148 comm=stress-ng-ptrac pid=1928 grp=1 res=1
stress-n-1931    0d..21  5060.894114: function:             rt_mutex_dequeue_pi
stress-n-1931    0d.h11  5060.894115: local_timer_entry:    vector=239

CPU 1:

- IRQ at 5060.894114 on CPU 1 followed by the IRQ on CPU 0

stress-n-1928    1....0  5060.891215: sys_enter:            NR 101 (18, 78b, 0, 0, 17, 788)
stress-n-1928    1d..11  5060.891216: function:             __try_to_take_rt_mutex
stress-n-1928    1d..21  5060.891216: function:                rt_mutex_enqueue_pi
stress-n-1928    1d..21  5060.891217: function:             rt_mutex_dequeue_pi
stress-n-1928    1....1  5060.891217: function:             rt_mutex_adjust_prio
stress-n-1928    1d..11  5060.891218: function:                __rt_mutex_adjust_prio
stress-n-1928    1d.h10  5060.894114: local_timer_entry:    vector=239

Thomas writes:

"""
This has nothing to do with RT. RT is merily exposing the
problem in an observable way. The same issue happens with upstream, it's
harder to trigger and it's harder to observe for obvious reasons.

If you read through the discussions [see the links below] then you
really see that there is an upstream issue with the x86 qrlock
implementation and Peter has posted fixes which resolve it, both at
the practical and the theoretical level.
"""

Backporting all qspinlock related patches is very likely to introduce
regressions on v4.4. Therefore, the recommended solution by Peter and
Thomas is to drop back to ticket spinlocks for v4.4.

Link :https://lkml.kernel.org/r/20180921120226.6xjgr4oiho22ex75@linutronix.de
Link: https://lkml.kernel.org/r/20180926110117.405325143@infradead.org
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/corruption-check: Fix panic in memory_corruption_check() when boot option without value is provided

commit ccde460b9ae5c2bd5e4742af0a7f623c2daad566 upstream.

memory_corruption_check[{_period|_size}]()'s handlers do not check input
argument before passing it to kstrtoul() or simple_strtoull(). The argument
would be a NULL pointer if each of the kernel parameters, without its
value, is set in command line and thus cause the following panic.

PANIC: early exception 0xe3 IP 10:ffffffff73587c22 error 0 cr2 0x0
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18-rc8+ #2
[    0.000000] RIP: 0010:kstrtoull+0x2/0x10
...
[    0.000000] Call Trace
[    0.000000]  ? set_corruption_check+0x21/0x49
[    0.000000]  ? do_early_param+0x4d/0x82
[    0.000000]  ? parse_args+0x212/0x330
[    0.000000]  ? rdinit_setup+0x26/0x26
[    0.000000]  ? parse_early_options+0x20/0x23
[    0.000000]  ? rdinit_setup+0x26/0x26
[    0.000000]  ? parse_early_param+0x2d/0x39
[    0.000000]  ? setup_arch+0x2f7/0xbf4
[    0.000000]  ? start_kernel+0x5e/0x4c2
[    0.000000]  ? load_ucode_bsp+0x113/0x12f
[    0.000000]  ? secondary_startup_64+0xa5/0xb0

This patch adds checks to prevent the panic.

Signed-off-by: He Zhe <zhe.he@windriver.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: gregkh@linuxfoundation.org
Cc: kstewart@linuxfoundation.org
Cc: pombredanne@nexb.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1534260823-87917-1-git-send-email-zhe.he@windriver.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: ca0106: Disable IZD on SB0570 DAC to fix audio pops

commit ac237c28d5ac1b241d58b1b7b4b9fa10efb22fb5 upstream.

The Creative Audigy SE (SB0570) card currently exhibits an audible pop
whenever playback is stopped or resumed, or during silent periods of an
audio stream. Initialise the IZD bit to the 0 to eliminate these pops.

The Infinite Zero Detection (IZD) feature on the DAC causes the output
to be shunted to Vcap after 2048 samples of silence. This discharges the
AC coupling capacitor through the output and causes the aforementioned
pop/click noise.

The behaviour of the IZD bit is described on page 15 of the WM8768GEDS
datasheet: "With IZD=1, applying MUTE for 1024 consecutive input samples
will cause all outputs to be connected directly to VCAP. This also
happens if 2048 consecutive zero input samples are applied to all 6
channels, and IZD=0. It will be removed as soon as any channel receives
a non-zero input". I believe the second sentence might be referring to
IZD=1 instead of IZD=0 given the observed behaviour of the card.

This change should make the DAC initialisation consistent with
Creative's Windows driver, as this popping persists when initialising
the card in Linux and soft rebooting into Windows, but is not present on
a cold boot to Windows.

Signed-off-by: Alex Stanoev <alex@astanoev.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Add mic quirk for the Lenovo G50-30 (17aa:3905)

commit e7bb6ad5685f05685dd8a6a5eda7bfcd14d5f95b upstream.

The Lenovo G50-30, like other G50 models, has a Conexant codec that
requires a quirk for its inverted stereo dmic.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1249364
Reported-by: Alexander Ploumistos <alex.ploumistos@gmail.com>
Tested-by: Alexander Ploumistos <alex.ploumistos@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix map_pages() to not overwrite existing pte entries

commit 3c229b3f2dd8133f61bb81d3cb018be92f4bba39 upstream.

Fix a long-existing small nasty bug in the map_pages() implementation which
leads to overwriting already written pte entries with zero, *if* map_pages() is
called a second time with an end address which isn't aligned on a pmd boundry.
This happens for example if we want to remap only the text segment read/write
in order to run alternative patching on the code. Exiting the loop when we
reach the end address fixes this.

Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix address in HPMC IVA

commit 1138b6718ff74d2a934459643e3754423d23b5e2 upstream.

Helge noticed that the address of the os_hpmc handler was not being
correctly calculated in the hpmc macro.  As a result, PDCE_CHECK would
fail to call os_hpmc:

<Cpu2> e800009802e00000  0000000000000000  CC_ERR_CHECK_HPMC
<Cpu2> 37000f7302e00000  8040004000000000  CC_ERR_CPU_CHECK_SUMMARY
<Cpu2> f600105e02e00000  fffffff0f0c00000  CC_MC_HPMC_MONARCH_SELECTED
<Cpu2> 140003b202e00000  000000000000000b  CC_ERR_HPMC_STATE_ENTRY
<Cpu2> 5600100b02e00000  00000000000001a0  CC_MC_OS_HPMC_LEN_ERR
<Cpu2> 5600106402e00000  fffffff0f0438e70  CC_MC_BR_TO_OS_HPMC_FAILED
<Cpu2> e800009802e00000  0000000000000000  CC_ERR_CHECK_HPMC
<Cpu2> 37000f7302e00000  8040004000000000  CC_ERR_CPU_CHECK_SUMMARY
<Cpu2> 4000109f02e00000  0000000000000000  CC_MC_HPMC_INITIATED
<Cpu2> 4000101902e00000  0000000000000000  CC_MC_MULTIPLE_HPMCS
<Cpu2> 030010d502e00000  0000000000000000  CC_CPU_STOP

The address problem can be seen by dumping the fault vector:

0000000040159000 <fault_vector_20>:
    40159000:   63 6f 77 73     stb r15,-2447(dp)
    40159004:   20 63 61 6e     ldil L%b747000,r3
    40159008:   20 66 6c 79     ldil L%-1c3b3000,r3
        ...
    40159020:   08 00 02 40     nop
    40159024:   20 6e 60 02     ldil L%15d000,r3
    40159028:   34 63 00 00     ldo 0(r3),r3
    4015902c:   e8 60 c0 02     bv,n r0(r3)
    40159030:   08 00 02 40     nop
    40159034:   00 00 00 00     break 0,0
    40159038:   c0 00 70 00     bb,*< r0,sar,40159840 <fault_vector_20+0x840>
    4015903c:   00 00 00 00     break 0,0

Location 40159038 should contain the physical address of os_hpmc:

000000004015d000 <os_hpmc>:
    4015d000:   08 1a 02 43     copy r26,r3
    4015d004:   01 c0 08 a4     mfctl iva,r4
    4015d008:   48 85 00 68     ldw 34(r4),r5

This patch moves the address setup into initialize_ivt to resolve the
above problem.  I tested the change by dumping the HPMC entry after setup:

0000000040209020:  8000240
0000000040209024: 206a2004
0000000040209028: 34630ac0
000000004020902c: e860c002
0000000040209030:  8000240
0000000040209034: 1bdddce6
0000000040209038:   15d000
000000004020903c:      1a0

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi: Fix timer race with module unload

commit 0711e8c1b4572d076264e71b0002d223f2666ed7 upstream.

Please note that below oops is from an older kernel, but the same
race seems to be present in the upstream kernel too.

---8<---

The following panic was encountered during removing the ipmi_ssif
module:

[ 526.352555] Unable to handle kernel paging request at virtual address ffff000006923090
[ 526.360464] Mem abort info:
[ 526.363257] ESR = 0x86000007
[ 526.366304] Exception class = IABT (current EL), IL = 32 bits
[ 526.372221] SET = 0, FnV = 0
[ 526.375269] EA = 0, S1PTW = 0
[ 526.378405] swapper pgtable: 4k pages, 48-bit VAs, pgd = 000000008ae60416
[ 526.385185] [ffff000006923090] *pgd=000000bffcffe803, *pud=000000bffcffd803, *pmd=0000009f4731a003, *pte=0000000000000000
[ 526.396141] Internal error: Oops: 86000007 [#1] SMP
[ 526.401008] Modules linked in: nls_iso8859_1 ipmi_devintf joydev input_leds ipmi_msghandler shpchp sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear i2c_smbus hid_generic usbhid uas hid usb_storage ast aes_ce_blk i2c_algo_bit aes_ce_cipher qede ttm crc32_ce ptp crct10dif_ce drm_kms_helper ghash_ce syscopyarea sha2_ce sysfillrect sysimgblt pps_core fb_sys_fops sha256_arm64 sha1_ce mpt3sas qed drm raid_class ahci scsi_transport_sas libahci gpio_xlp i2c_xlp9xx aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64 [last unloaded: ipmi_ssif]
[ 526.468085] CPU: 125 PID: 0 Comm: swapper/125 Not tainted 4.15.0-35-generic #38~lp1775396+build.1
[ 526.476942] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL022 08/14/2018
[ 526.484932] pstate: 00400009 (nzcv daif +PAN -UAO)
[ 526.489713] pc : 0xffff000006923090
[ 526.493198] lr : call_timer_fn+0x34/0x178
[ 526.497194] sp : ffff000009b0bdd0
[ 526.500496] x29: ffff000009b0bdd0 x28: 0000000000000082
[ 526.505796] x27: 0000000000000002 x26: ffff000009515188
[ 526.511096] x25: ffff000009515180 x24: ffff0000090f1018
[ 526.516396] x23: ffff000009519660 x22: dead000000000200
[ 526.521696] x21: ffff000006923090 x20: 0000000000000100
[ 526.526995] x19: ffff809eeb466a40 x18: 0000000000000000
[ 526.532295] x17: 000000000000000e x16: 0000000000000007
[ 526.537594] x15: 0000000000000000 x14: 071c71c71c71c71c
[ 526.542894] x13: 0000000000000000 x12: 0000000000000000
[ 526.548193] x11: 0000000000000001 x10: ffff000009b0be88
[ 526.553493] x9 : 0000000000000000 x8 : 0000000000000005
[ 526.558793] x7 : ffff80befc1f8528 x6 : 0000000000000020
[ 526.564092] x5 : 0000000000000040 x4 : 0000000020001b20
[ 526.569392] x3 : 0000000000000000 x2 : ffff809eeb466a40
[ 526.574692] x1 : ffff000006923090 x0 : ffff809eeb466a40
[ 526.579992] Process swapper/125 (pid: 0, stack limit = 0x000000002eb50acc)
[ 526.586854] Call trace:
[ 526.589289] 0xffff000006923090
[ 526.592419] expire_timers+0xc8/0x130
[ 526.596070] run_timer_softirq+0xec/0x1b0
[ 526.600070] __do_softirq+0x134/0x328
[ 526.603726] irq_exit+0xc8/0xe0
[ 526.606857] __handle_domain_irq+0x6c/0xc0
[ 526.610941] gic_handle_irq+0x84/0x188
[ 526.614679] el1_irq+0xe8/0x180
[ 526.617822] cpuidle_enter_state+0xa0/0x328
[ 526.621993] cpuidle_enter+0x34/0x48
[ 526.625564] call_cpuidle+0x44/0x70
[ 526.629040] do_idle+0x1b8/0x1f0
[ 526.632256] cpu_startup_entry+0x2c/0x30
[ 526.636174] secondary_start_kernel+0x11c/0x130
[ 526.640694] Code: bad PC value
[ 526.643800] ---[ end trace d020b0b8417c2498 ]---
[ 526.648404] Kernel panic - not syncing: Fatal exception in interrupt
[ 526.654778] SMP: stopping secondary CPUs
[ 526.658734] Kernel Offset: disabled
[ 526.662211] CPU features: 0x5800c38
[ 526.665688] Memory Limit: none
[ 526.668768] ---[ end Kernel panic - not syncing: Fatal exception in interrupt

Prevent mod_timer from arming a timer that was already removed by
del_timer during module unload.

Signed-off-by: Jan Glauber <jglauber@cavium.com>
Cc: <stable@vger.kernel.org> # 3.19
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pcmcia: Implement CLKRUN protocol disabling for Ricoh bridges

commit 95691e3eddc41da2d1cd3cca51fecdfb46bd85bc upstream.

Currently, "disable_clkrun" yenta_socket module parameter is only
implemented for TI CardBus bridges.
Add also an implementation for Ricoh bridges that have the necessary
setting documented in publicly available datasheets.

Tested on a RL5C476II with a Sunrich C-160 CardBus NIC that doesn't work
correctly unless the CLKRUN protocol is disabled.

Let's also make it clear in its description that the "disable_clkrun"
module parameter only works on these two previously mentioned brands of
CardBus bridges.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Cc: stable@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jffs2: free jffs2_sb_info through jffs2_kill_sb()

commit 92e2921f7eee63450a5f953f4b15dc6210219430 upstream.

When an invalid mount option is passed to jffs2, jffs2_parse_options()
will fail and jffs2_sb_info will be freed, but then jffs2_sb_info will
be used (use-after-free) and freeed (double-free) in jffs2_kill_sb().

Fix it by removing the buggy invocation of kfree() when getting invalid
mount options.

Fixes: 92abc475d8de ("jffs2: implement mount option parsing and compression overriding")
Cc: stable@kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (pmbus) Fix page count auto-detection.

commit e7c6a55606b5c46b449d76588968b4d8caae903f upstream.

Devices with compatible="pmbus" field have zero initial page count,
and pmbus_clear_faults() being called before the page count auto-
detection does not actually clear faults because it depends on the
page count. Non-cleared faults in its turn may fail the subsequent
page count auto-detection.

This patch fixes this problem by calling pmbus_clear_fault_page()
for currently set page and calling pmbus_clear_faults() after the
page count was detected.

Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Bazhenov <bazhenov.dn@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: fix miss key refill->end in writeback

commit 2d6cb6edd2c7fb4f40998895bda45006281b1ac5 upstream.

refill->end record the last key of writeback, for example, at the first
time, keys (1,128K) to (1,1024K) are flush to the backend device, but
the end key (1,1024K) is not included, since the bellow code:
if (bkey_cmp(k, refill->end) >= 0) {
ret = MAP_DONE;
goto out;
}
And in the next time when we refill writeback keybuf again, we searched
key start from (1,1024K), and got a key bigger than it, so the key
(1,1024K) missed.
This patch modify the above code, and let the end key to be included to
the writeback key buffer.

Signed-off-by: Tang Junhui <tang.junhui.linux@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.163

x86/time: Correct the attribute on jiffies' definition

commit 53c13ba8ed39e89f21a0b98f4c8a241bb44e483d upstream.

Clang warns that the declaration of jiffies in include/linux/jiffies.h
doesn't match the definition in arch/x86/time/kernel.c:

arch/x86/kernel/time.c:29:42: warning: section does not match previous declaration [-Wsection]
__visible volatile unsigned long jiffies __cacheline_aligned = INITIAL_JIFFIES;
                                         ^
./include/linux/cache.h:49:4: note: expanded from macro '__cacheline_aligned'
                 __section__(".data..cacheline_aligned")))
                 ^
./include/linux/jiffies.h:81:31: note: previous attribute is here
extern unsigned long volatile __cacheline_aligned_in_smp __jiffy_arch_data jiffies;
                              ^
./arch/x86/include/asm/cache.h:20:2: note: expanded from macro '__cacheline_aligned_in_smp'
        __page_aligned_data
        ^
./include/linux/linkage.h:39:29: note: expanded from macro '__page_aligned_data'
#define __page_aligned_data     __section(.data..page_aligned) __aligned(PAGE_SIZE)
                                ^
./include/linux/compiler_attributes.h:233:56: note: expanded from macro '__section'
#define __section(S)                    __attribute__((__section__(#S)))
                                                       ^
1 warning generated.

The declaration was changed in commit 7c30f352c852 ("jiffies.h: declare
jiffies and jiffies_64 with ____cacheline_aligned_in_smp") but wasn't
updated here. Make them match so Clang no longer warns.

Fixes: 7c30f352c852 ("jiffies.h: declare jiffies and jiffies_64 with ____cacheline_aligned_in_smp")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181013005311.28617-1-natechancellor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

l2tp: hold tunnel socket when handling control frames in l2tp_ip and l2tp_ip6

commit 94d7ee0baa8b764cf64ad91ed69464c1a6a0066b upstream.

The code following l2tp_tunnel_find() expects that a new reference is
held on sk. Either sk_receive_skb() or the discard_put error path will
drop a reference from the tunnel's socket.

This issue exists in both l2tp_ip and l2tp_ip6.

Fixes: a3c18422a4b4 ("l2tp: hold socket before dropping lock in l2tp_ip{, 6}_recv()")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpuidle: Do not access cpuidle_devices when !CONFIG_CPU_IDLE

commit 9bd616e3dbedfc103f158197c8ad93678849b1ed upstream.

The cpuidle_devices per-CPU variable is only defined when CPU_IDLE is
enabled. Commit c8cc7d4de7a4 ("sched/idle: Reorganize the idle loop")
removed the #ifdef CONFIG_CPU_IDLE around cpuidle_idle_call() with the
compiler optimising away __this_cpu_read(cpuidle_devices). However, with
CONFIG_UBSAN && !CONFIG_CPU_IDLE, this optimisation no longer happens
and the kernel fails to link since cpuidle_devices is not defined.

This patch introduces an accessor function for the current CPU cpuidle
device (returning NULL when !CONFIG_CPU_IDLE) and uses it in
cpuidle_idle_call().

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: 4.5+ <stable@vger.kernel.org> # 4.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/percpu: Fix this_cpu_read()

commit b59167ac7bafd804c91e49ad53c6d33a7394d4c8 upstream.

Eric reported that a sequence count loop using this_cpu_read() got
optimized out. This is wrong, this_cpu_read() must imply READ_ONCE()
because the interface is IRQ-safe, therefore an interrupt can have
changed the per-cpu value.

Fixes: 7c3576d261ce ("[PATCH] i386: Convert PDA into the percpu section")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Cc: hpa@zytor.com
Cc: eric.dumazet@gmail.com
Cc: bp@alien8.de
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181011104019.748208519@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/fair: Fix throttle_list starvation with low CFS quota

commit baa9be4ffb55876923dc9716abc0a448e510ba30 upstream.

With a very low cpu.cfs_quota_us setting, such as the minimum of 1000,
distribute_cfs_runtime may not empty the throttled_list before it runs
out of runtime to distribute. In that case, due to the change from
c06f04c7048 to put throttled entries at the head of the list, later entries
on the list will starve.  Essentially, the same X processes will get pulled
off the list, given CPU time and then, when expired, get put back on the
head of the list where distribute_cfs_runtime will give runtime to the same
set of processes leaving the rest.

Fix the issue by setting a bit in struct cfs_bandwidth when
distribute_cfs_runtime is running, so that the code in throttle_cfs_rq can
decide to put the throttled entry on the tail or the head of the list.  The
bit is set/cleared by the callers of distribute_cfs_runtime while they hold
cfs_bandwidth->lock.

This is easy to reproduce with a handful of CPU consumers. I use 'crash' on
the live system. In some cases you can simply look at the throttled list and
see the later entries are not changing:

  crash> list cfs_rq.throttled_list -H 0xffff90b54f6ade40 -s cfs_rq.runtime_remaining | paste - - | awk '{print $1"  "$4}' | pr -t -n3
    1     ffff90b56cb2d200  -976050
    2     ffff90b56cb2cc00  -484925
    3     ffff90b56cb2bc00  -658814
    4     ffff90b56cb2ba00  -275365
    5     ffff90b166a45600  -135138
    6     ffff90b56cb2da00  -282505
    7     ffff90b56cb2e000  -148065
    8     ffff90b56cb2fa00  -872591
    9     ffff90b56cb2c000  -84687
   10     ffff90b56cb2f000  -87237
   11     ffff90b166a40a00  -164582

  crash> list cfs_rq.throttled_list -H 0xffff90b54f6ade40 -s cfs_rq.runtime_remaining | paste - - | awk '{print $1"  "$4}' | pr -t -n3
    1     ffff90b56cb2d200  -994147
    2     ffff90b56cb2cc00  -306051
    3     ffff90b56cb2bc00  -961321
    4     ffff90b56cb2ba00  -24490
    5     ffff90b166a45600  -135138
    6     ffff90b56cb2da00  -282505
    7     ffff90b56cb2e000  -148065
    8     ffff90b56cb2fa00  -872591
    9     ffff90b56cb2c000  -84687
   10     ffff90b56cb2f000  -87237
   11     ffff90b166a40a00  -164582

Sometimes it is easier to see by finding a process getting starved and looking
at the sched_info:

  crash> task ffff8eb765994500 sched_info
  PID: 7800   TASK: ffff8eb765994500  CPU: 16  COMMAND: "cputest"
    sched_info = {
      pcount = 8,
      run_delay = 697094208,
      last_arrival = 240260125039,
      last_queued = 240260327513
    },
  crash> task ffff8eb765994500 sched_info
  PID: 7800   TASK: ffff8eb765994500  CPU: 16  COMMAND: "cputest"
    sched_info = {
      pcount = 8,
      run_delay = 697094208,
      last_arrival = 240260125039,
      last_queued = 240260327513
    },

Signed-off-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: c06f04c70489 ("sched: Fix potential near-infinite distribute_cfs_runtime() loop")
Link: http://lkml.kernel.org/r/20181008143639.GA4019@pauld.bos.csb
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15IGM

commit 13c1c5e4d7f887cba36c5e3df3faa22071c1469f upstream.

Add ELAN061C to the ACPI table to support Elan touchpad found in Lenovo
IdeaPad 330-15IGM.

Signed-off-by: Mikhail Nikiforov <jackxviichaos@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: fix the usbfs flag sanitization for control transfers

commit 665c365a77fbfeabe52694aedf3446d5f2f1ce42 upstream.

Commit 7a68d9fb8510 ("USB: usbdevfs: sanitize flags more") checks the
transfer flags for URBs submitted from userspace via usbfs.  However,
the check for whether the USBDEVFS_URB_SHORT_NOT_OK flag should be
allowed for a control transfer was added in the wrong place, before
the code has properly determined the direction of the control
transfer.  (Control transfers are special because for them, the
direction is set by the bRequestType byte of the Setup packet rather
than direction bit of the endpoint address.)

This patch moves code which sets up the allow_short flag for control
transfers down after is_in has been set to the correct value.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+24a30223a4b609bb802e@syzkaller.appspotmail.com
Fixes: 7a68d9fb8510 ("USB: usbdevfs: sanitize flags more")
CC: Oliver Neukum <oneukum@suse.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: storage: Fix Spectre v1 vulnerability

commit 9ae24af3669111d418242caec8dd4ebd9ba26860 upstream.

num can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/usb/gadget/function/f_mass_storage.c:3177 fsg_lun_make() warn:
potential spectre issue 'fsg_opts->common->luns' [r] (local cap)

Fix this by sanitizing num before using it to index
fsg_opts->common->luns

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Felipe Balbi <felipe.balbi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cdc-acm: correct counting of UART states in serial state notification

commit f976d0e5747ca65ccd0fb2a4118b193d70aa1836 upstream.

The usb standard ("Universal Serial Bus Class Definitions for Communication
Devices") distiguishes between "consistent signals" (DSR, DCD), and
"irregular signals" (break, ring, parity error, framing error, overrun).
The bits of "irregular signals" are set, if this error/event occurred on
the device side and are immeadeatly unset, if the serial state notification
was sent.
Like other drivers of real serial ports do, just the occurence of those
events should be counted in serial_icounter_struct (but no 1->0
transitions).

Signed-off-by: Tobias Herzog <t-herzog@gmx.de>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/ucm: Fix Spectre v1 vulnerability

commit 0295e39595e1146522f2722715dba7f7fba42217 upstream.

hdr.cmd can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/infiniband/core/ucm.c:1127 ib_ucm_write() warn: potential
spectre issue 'ucm_cmd_table' [r] (local cap)

Fix this by sanitizing hdr.cmd before using it to index
ucm_cmd_table.

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/ucma: Fix Spectre v1 vulnerability

commit a3671a4f973ee9d9621d60166cc3b037c397d604 upstream.

hdr.cmd can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/infiniband/core/ucma.c:1686 ucma_write() warn: potential
spectre issue 'ucma_cmd_table' [r] (local cap)

Fix this by sanitizing hdr.cmd before using it to index
ucm_cmd_table.

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ptp: fix Spectre v1 vulnerability

commit efa61c8cf2950ab5c0e66cff3cabe2a2b24e81ba upstream.

pin_index can be indirectly controlled by user-space, hence leading
to a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/ptp/ptp_chardev.c:253 ptp_ioctl() warn: potential spectre issue
'ops->pin_config' [r] (local cap)

Fix this by sanitizing pin_index before using it to index
ops->pin_config, and before passing it as an argument to
function ptp_set_pinfunc(), in which it is used to index
info->pin_config.

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cachefiles: fix the race between cachefiles_bury_object() and rmdir(2)

commit 169b803397499be85bdd1e3d07d6f5e3d4bd669e upstream.

the victim might've been rmdir'ed just before the lock_rename();
unlike the normal callers, we do not look the source up after the
parents are locked - we know it beforehand and just recheck that it's
still the child of what used to be its parent.  Unfortunately,
the check is too weak - we don't spot a dead directory since its
->d_parent is unchanged, dentry is positive, etc.  So we sail all
the way to ->rename(), with hosting filesystems _not_ expecting
to be asked renaming an rmdir'ed subdirectory.

The fix is easy, fortunately - the lock on parent is sufficient for
making IS_DEADDIR() on child safe.

Cc: stable@vger.kernel.org
Fixes: 9ae326a69004 (CacheFiles: A cache that backs onto a mounted filesystem)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ahci: don't ignore result code of ahci_reset_controller()

[ Upstream commit d312fefea8387503375f728855c9a62de20c9665 ]

ahci_pci_reset_controller() calls ahci_reset_controller(), which may
fail, but ignores the result code and always returns success. This
may result in failures like below

  ahci 0000:02:00.0: version 3.0
  ahci 0000:02:00.0: enabling device (0000 -> 0003)
  ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled
  ahci 0000:02:00.0: controller reset failed (0xffffffff)
  ahci 0000:02:00.0: failed to stop engine (-5)
    ... repeated many times ...
  ahci 0000:02:00.0: failed to stop engine (-5)
  Unable to handle kernel paging request at virtual address ffff0000093f9018
    ...
  PC is at ahci_stop_engine+0x5c/0xd8 [libahci]
  LR is at ahci_deinit_port.constprop.12+0x1c/0xc0 [libahci]
    ...
  [<ffff000000a17014>] ahci_stop_engine+0x5c/0xd8 [libahci]
  [<ffff000000a196b4>] ahci_deinit_port.constprop.12+0x1c/0xc0 [libahci]
  [<ffff000000a197d8>] ahci_init_controller+0x80/0x168 [libahci]
  [<ffff000000a260f8>] ahci_pci_init_controller+0x60/0x68 [ahci]
  [<ffff000000a26f94>] ahci_init_one+0x75c/0xd88 [ahci]
  [<ffff000008430324>] local_pci_probe+0x3c/0xb8
  [<ffff000008431728>] pci_device_probe+0x138/0x170
  [<ffff000008585e54>] driver_probe_device+0x2dc/0x458
  [<ffff0000085860e4>] __driver_attach+0x114/0x118
  [<ffff000008583ca8>] bus_for_each_dev+0x60/0xa0
  [<ffff000008585638>] driver_attach+0x20/0x28
  [<ffff0000085850b0>] bus_add_driver+0x1f0/0x2a8
  [<ffff000008586ae0>] driver_register+0x60/0xf8
  [<ffff00000842f9b4>] __pci_register_driver+0x3c/0x48
  [<ffff000000a3001c>] ahci_pci_driver_init+0x1c/0x1000 [ahci]
  [<ffff000008083918>] do_one_initcall+0x38/0x120

where an obvious hardware level failure results in an unnecessary 15 second
delay and a subsequent crash.

So record the result code of ahci_reset_controller() and relay it, rather
than ignoring it.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: shash - Fix a sleep-in-atomic bug in shash_setkey_unaligned

[ Upstream commit 9039f3ef446e9ffa200200c934f049add9e58426 ]

The SCTP program may sleep under a spinlock, and the function call path is:
sctp_generate_t3_rtx_event (acquire the spinlock)
  sctp_do_sm
    sctp_side_effects
      sctp_cmd_interpreter
        sctp_make_init_ack
          sctp_pack_cookie
            crypto_shash_setkey
              shash_setkey_unaligned
                kmalloc(GFP_KERNEL)

For the same reason, the orinoco driver may sleep in interrupt handler,
and the function call path is:
orinoco_rx_isr_tasklet
  orinoco_rx
    orinoco_mic
      crypto_shash_setkey
        shash_setkey_unaligned
          kmalloc(GFP_KERNEL)

To fix it, GFP_KERNEL is replaced with GFP_ATOMIC.
This bug is found by my static analysis tool and my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mremap: properly flush TLB before releasing the page

Commit eb66ae030829605d61fbef1909ce310e29f78821 upstream.

This is a backport to stable 4.4.y.

Jann Horn points out that our TLB flushing was subtly wrong for the
mremap() case.  What makes mremap() special is that we don't follow the
usual "add page to list of pages to be freed, then flush tlb, and then
free pages".  No, mremap() obviously just _moves_ the page from one page
table location to another.

That matters, because mremap() thus doesn't directly control the
lifetime of the moved page with a freelist: instead, the lifetime of the
page is controlled by the page table locking, that serializes access to
the entry.

As a result, we need to flush the TLB not just before releasing the lock
for the source location (to avoid any concurrent accesses to the entry),
but also before we release the destination page table lock (to avoid the
TLB being flushed after somebody else has already done something to that
page).

This also makes the whole "need_flush" logic unnecessary, since we now
always end up flushing the TLB for every valid entry.

Reported-and-tested-by: Jann Horn <jannh@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[will: backport to 4.4 stable]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtnetlink: Disallow FDB configuration for non-Ethernet device

[ Upstream commit da71577545a52be3e0e9225a946e5fd79cfab015 ]

When an FDB entry is configured, the address is validated to have the
length of an Ethernet address, but the device for which the address is
configured can be of any type.

The above can result in the use of uninitialized memory when the address
is later compared against existing addresses since 'dev->addr_len' is
used and it may be greater than ETH_ALEN, as with ip6tnl devices.

Fix this by making sure that FDB entries are only configured for
Ethernet devices.

BUG: KMSAN: uninit-value in memcmp+0x11d/0x180 lib/string.c:863
CPU: 1 PID: 4318 Comm: syz-executor998 Not tainted 4.19.0-rc3+ #49
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x14b/0x190 lib/dump_stack.c:113
  kmsan_report+0x183/0x2b0 mm/kmsan/kmsan.c:956
  __msan_warning+0x70/0xc0 mm/kmsan/kmsan_instr.c:645
  memcmp+0x11d/0x180 lib/string.c:863
  dev_uc_add_excl+0x165/0x7b0 net/core/dev_addr_lists.c:464
  ndo_dflt_fdb_add net/core/rtnetlink.c:3463 [inline]
  rtnl_fdb_add+0x1081/0x1270 net/core/rtnetlink.c:3558
  rtnetlink_rcv_msg+0xa0b/0x1530 net/core/rtnetlink.c:4715
  netlink_rcv_skb+0x36e/0x5f0 net/netlink/af_netlink.c:2454
  rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4733
  netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
  netlink_unicast+0x1638/0x1720 net/netlink/af_netlink.c:1343
  netlink_sendmsg+0x1205/0x1290 net/netlink/af_netlink.c:1908
  sock_sendmsg_nosec net/socket.c:621 [inline]
  sock_sendmsg net/socket.c:631 [inline]
  ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114
  __sys_sendmsg net/socket.c:2152 [inline]
  __do_sys_sendmsg net/socket.c:2161 [inline]
  __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159
  __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159
  do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291
  entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x440ee9
Code: e8 cc ab 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 bb 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff6a93b518 EFLAGS: 00000213 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440ee9
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000003
RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000004002c8 R11: 0000000000000213 R12: 000000000000b4b0
R13: 0000000000401ec0 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
  kmsan_save_stack_with_flags mm/kmsan/kmsan.c:256 [inline]
  kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:181
  kmsan_kmalloc+0x98/0x100 mm/kmsan/kmsan_hooks.c:91
  kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:100
  slab_post_alloc_hook mm/slab.h:446 [inline]
  slab_alloc_node mm/slub.c:2718 [inline]
  __kmalloc_node_track_caller+0x9e7/0x1160 mm/slub.c:4351
  __kmalloc_reserve net/core/skbuff.c:138 [inline]
  __alloc_skb+0x2f5/0x9e0 net/core/skbuff.c:206
  alloc_skb include/linux/skbuff.h:996 [inline]
  netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline]
  netlink_sendmsg+0xb49/0x1290 net/netlink/af_netlink.c:1883
  sock_sendmsg_nosec net/socket.c:621 [inline]
  sock_sendmsg net/socket.c:631 [inline]
  ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114
  __sys_sendmsg net/socket.c:2152 [inline]
  __do_sys_sendmsg net/socket.c:2161 [inline]
  __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159
  __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159
  do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291
  entry_SYSCALL_64_after_hwframe+0x63/0xe7

v2:
* Make error message more specific (David)

Fixes: 090096bf3db1 ("net: generic fdb support for drivers without ndo_fdb_<op>")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-and-tested-by: syzbot+3a288d5f5530b901310e@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+d53ab4e92a1db04110ff@syzkaller.appspotmail.com
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vhost: Fix Spectre V1 vulnerability

[ Upstream commit ff002269a4ee9c769dbf9365acef633ebcbd6cbe ]

The idx in vhost_vring_ioctl() was controlled by userspace, hence a
potential exploitation of the Spectre variant 1 vulnerability.

Fixing this by sanitizing idx before using it to index d->vqs.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: drop skb on failure in ip_check_defrag()

[ Upstream commit 7de414a9dd91426318df7b63da024b2b07e53df5 ]

Most callers of pskb_trim_rcsum() simply drop the skb when
it fails, however, ip_check_defrag() still continues to pass
the skb up to stack. This is suspicious.

In ip_check_defrag(), after we learn the skb is an IP fragment,
passing the skb to callers makes no sense, because callers expect
fragments are defrag'ed on success. So, dropping the skb when we
can't defrag it is reasonable.

Note, prior to commit 88078d98d1bb, this is not a big problem as
checksum will be fixed up anyway. After it, the checksum is not
correct on failure.

Found this during code review.

Fixes: 88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: fix race on sctp_id2asoc

[ Upstream commit b336decab22158937975293aea79396525f92bb3 ]

syzbot reported an use-after-free involving sctp_id2asoc.  Dmitry Vyukov
helped to root cause it and it is because of reading the asoc after it
was freed:

        CPU 1                       CPU 2
(working on socket 1)            (working on socket 2)
                         sctp_association_destroy
sctp_id2asoc
   spin lock
     grab the asoc from idr
   spin unlock
                                   spin lock
     remove asoc from idr
   spin unlock
   free(asoc)
   if asoc->base.sk != sk ... [*]

This can only be hit if trying to fetch asocs from different sockets. As
we have a single IDR for all asocs, in all SCTP sockets, their id is
unique on the system. An application can try to send stuff on an id
that matches on another socket, and the if in [*] will protect from such
usage. But it didn't consider that as that asoc may belong to another
socket, it may be freed in parallel (read: under another socket lock).

We fix it by moving the checks in [*] into the protected region. This
fixes it because the asoc cannot be freed while the lock is held.

Reported-by: syzbot+c7dd55d7aec49d48e49a@syzkaller.appspotmail.com
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8169: fix NAPI handling under high load

[ Upstream commit 6b839b6cf9eada30b086effb51e5d6076bafc761 ]

rtl_rx() and rtl_tx() are called only if the respective bits are set
in the interrupt status register. Under high load NAPI may not be
able to process all data (work_done == budget) and it will schedule
subsequent calls to the poll callback.
rtl_ack_events() however resets the bits in the interrupt status
register, therefore subsequent calls to rtl8169_poll() won't call
rtl_rx() and rtl_tx() - chip interrupts are still disabled.

Fix this by calling rtl_rx() and rtl_tx() independent of the bits
set in the interrupt status register. Both functions will detect
if there's nothing to do for them.

Fixes: da78dbff2e05 ("r8169: remove work from irq handler.")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>