OSDN Git Service
Chris Park [Mon, 22 Feb 2016 04:12:01 +0000 (13:12 +0900)]
staging: wilc1000: host_interface.c: removes unnecessary log messages
This patch removes unnecessary log messages.
Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Park [Mon, 22 Feb 2016 04:12:00 +0000 (13:12 +0900)]
staging: wilc1000: coreconfigurator.c: removes unnecessary log messages
This patch removes unnecessary log messages.
Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Park [Mon, 22 Feb 2016 04:11:59 +0000 (13:11 +0900)]
staging: wilc1000: removes unused CFG80211_DBG tag
This patch removes unused CFG80211_DBG tag.
Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Park [Mon, 22 Feb 2016 04:11:58 +0000 (13:11 +0900)]
staging: wilc1000: wilc_wfi_cfgoperations.c: removes unnecessary log messages
This patch removes unnecessary log messages.
And, it adds a 'break' statement in accordance with the switch-case rule.
Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Park [Mon, 22 Feb 2016 04:11:57 +0000 (13:11 +0900)]
staging: wilc1000: wilc_wfi_cfgoperations.c: removes unnecessary log messages
This patch removes unnecessary log messages and relate variables.
Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Park [Mon, 22 Feb 2016 04:11:56 +0000 (13:11 +0900)]
staging: wilc1000: host_interface.c: removes unnecessary log messages
This patch removes unnecessary log message and relate variables.
Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Park [Mon, 22 Feb 2016 04:11:55 +0000 (13:11 +0900)]
staging: wilc1000: removes unused HOSTAPD_DBG tag
This patch removes unused HOSTAPD_DBG tag.
Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Park [Mon, 22 Feb 2016 04:11:54 +0000 (13:11 +0900)]
staging: wilc1000: wilc_wfi_cfgoperations.c: removes unnecessary log messages
This patch removes the unnecessary log messages which is used with
the HOSTAPD_DBG tag.
Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Park [Mon, 22 Feb 2016 04:11:53 +0000 (13:11 +0900)]
staging: wilc1000: linux_mon.c: removes comments
This patch removes unnecessary comments.
Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Park [Mon, 22 Feb 2016 04:11:52 +0000 (13:11 +0900)]
staging: wilc1000: linux_mon.c: removes unnecessary log message
This patch removes unnecessary log message and relate variables.
Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Park [Mon, 22 Feb 2016 04:11:51 +0000 (13:11 +0900)]
staging: wilc1000: host_interface.c: removes unnecessary log message
This patch removes unnecessary log message and relate variables.
Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Mon, 22 Feb 2016 04:11:50 +0000 (13:11 +0900)]
staging: wilc1000: removes potential null dereference
This patch removes the error reported by smatch.
- wilc_wfi_cfgoperations.c:674 scan() error:
potential null dereference 'strHiddenNetwork.net_info'. (kmalloc returns null)
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Mon, 22 Feb 2016 04:11:49 +0000 (13:11 +0900)]
staging: wilc1000: linux_mon.c: add to check routine
This patch adds the return value which needs the check and
prints the error message when it fails.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Mon, 22 Feb 2016 04:11:48 +0000 (13:11 +0900)]
staging: wilc1000: linux_mon.c: replaces PRINT_ER with netdev_err
This patches replaces PRINT_ER with netdev_err.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Mon, 22 Feb 2016 04:11:47 +0000 (13:11 +0900)]
staging: wilc1000: linux_mon.c: removes debug logs
This patches removes unnecessary debug logs.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Mon, 22 Feb 2016 04:11:46 +0000 (13:11 +0900)]
staging: wilc1000: wilc_wlan.c: removes PRINT_ER
This patches removes PRINT_ER that is unnecessary debug logs.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shraddha Barke [Wed, 17 Feb 2016 12:33:38 +0000 (18:03 +0530)]
Staging: gdm72xx: Remove wrapper function put_event_entry
put_event_entry is used only once. Replace it's usage with direct call
to list_add_tail().
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shraddha Barke [Wed, 17 Feb 2016 12:32:34 +0000 (18:02 +0530)]
Staging: gdm72xx: Remove unnecessary parenthesis around function pointer
No need for the parentheses around any function pointer.
Detected using checkpatch.
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shraddha Barke [Wed, 17 Feb 2016 12:31:26 +0000 (18:01 +0530)]
Staging: gdm72xx: Add space around that "+", "&" and "/"
Add missing spaces around "+", "&" and "/" to follow kernel coding
style. Warning detected by checkpatch.
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shraddha Barke [Wed, 17 Feb 2016 12:30:45 +0000 (18:00 +0530)]
Staging: gdm72xx: Add space around that "+", "&" and "|"
Add missing spaces around "+", "&" and "|" to follow kernel coding
style. Warning detected by checkpatch.
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shaun Ren [Mon, 15 Feb 2016 18:58:54 +0000 (10:58 -0800)]
Staging: rts5208: rtsx_transport.c: Fix comparisons to NULL
This patch changes all comparsions to NULL with !..., as reported by
checkpatch.pl.
Signed-off-by: Shaun Ren <shaun.ren@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shaun Ren [Mon, 15 Feb 2016 18:58:53 +0000 (10:58 -0800)]
Staging: rts5208: rtsx_transport.c: Remove unnecessary parentheses
This patch removes all unnecessary parentheses found by checkpatch.pl.
Signed-off-by: Shaun Ren <shaun.ren@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shaun Ren [Mon, 15 Feb 2016 18:58:52 +0000 (10:58 -0800)]
Staging: rts5208: rtsx_transport.c: Fix label naming convention
This patch fixes the following naming convention issue in rtsx_transport.c,
as reported by checkpatch.pl:
CHECK: Avoid CamelCase: <Handle_Errors>
Signed-off-by: Shaun Ren <shaun.ren@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shaun Ren [Mon, 15 Feb 2016 18:58:51 +0000 (10:58 -0800)]
Staging: rts5208: rtsx_transport.c: Remove extra newlines
This patch fixes the following issues in rtsx_transport.c as reported by
checkpatch.pl:
CHECK: Blank lines aren't necessary after an open brace '{'
CHECK: Please don't use multiple blank lines
Signed-off-by: Shaun Ren <shaun.ren@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shaun Ren [Mon, 15 Feb 2016 18:58:50 +0000 (10:58 -0800)]
Staging: rts5208: rtsx_transport.c: Add spaces around -
This patch fixes the following styling issue in rtsx_transport.c
as reported by checkpatch.pl:
CHECK: spaces preferred around that '-' (ctx:VxV)
Signed-off-by: Shaun Ren <shaun.ren@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shaun Ren [Mon, 15 Feb 2016 18:58:49 +0000 (10:58 -0800)]
Staging: rts5208: rtsx_transport.c: Remove spaces after casts
This patch removes all spaces after casts in rtsx_transport.c, as reported
by checkpatch.pl:
CHECK: No space is necessary after a cast
Signed-off-by: Shaun Ren <shaun.ren@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shaun Ren [Mon, 15 Feb 2016 18:58:48 +0000 (10:58 -0800)]
Staging: rts5208: rtsx_transport.c: Align to open parenthesis
This patch fixes the alignment issue reported by checkpatch.pl:
CHECK: Alignment should match open parenthesis
Add a unsigned char *sgbuffer in rtsx_stor_access_xfer_buffer to make the
following memcpy logic easier to read.
Add a struct scatterlist *sg in the use_sg branch of
rtsx_transfer_data_partial to make the parameters of the
rtsx_transfer_sglist_adma_partial call fit in 80 character lines after
aligning them to the open parenthesis.
Refactor memcpy logic in rtsx_stor_access_xfer_buf to make it more legible.
Signed-off-by: Shaun Ren <shaun.ren@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shaun Ren [Mon, 15 Feb 2016 18:58:47 +0000 (10:58 -0800)]
Staging: rts5208: rtsx_transport.c: Cleanup comments
This patch fixes all multiline comments to conform to the coding style,
which states that multiline comments should start with "/*" and end
with "*/" on a separate line.
Also cleans up some comments to make them more clear and/or reflect what
the code is doing.
Signed-off-by: Shaun Ren <shaun.ren@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Rapoport [Fri, 19 Feb 2016 15:56:15 +0000 (17:56 +0200)]
staging: sm750fb: remove sm750_help.h
This header only contains unused FIELD_*() macros and friends and may be
removed
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Rapoport [Fri, 19 Feb 2016 15:56:14 +0000 (17:56 +0200)]
staging: sm750fb: move MHz() and roundedDiv() close to their usage
The MHz() and roundedDiv macros are used only by ddk750_chip.c, so move
their definition there.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Rapoport [Fri, 19 Feb 2016 15:56:13 +0000 (17:56 +0200)]
staging: sm750fb: replace absDiff with kernel standard abs macro
<linux/kernel.h> already has 'abs', use it instead of custom absDiff
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Rapoport [Fri, 19 Feb 2016 15:56:12 +0000 (17:56 +0200)]
staging: sm750: change definition of multi-bit register fields
Use stratigh-forward of multi-bit register fields
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Rapoport [Fri, 19 Feb 2016 15:56:11 +0000 (17:56 +0200)]
staging: sm750fb: use BIT() macro for single-bit fields definition
Replace complex definition of single-bit fields with BIT() macro for the
registers that are not currently referenced by the driver.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Garcia Liebana [Sat, 20 Feb 2016 11:38:20 +0000 (12:38 +0100)]
staging: nvec: Fix alignment with the open parenthesis
Alignment should match open parenthesis. Checkpatch detected these
issues.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Garcia Liebana [Sat, 20 Feb 2016 10:32:36 +0000 (11:32 +0100)]
staging: nvec: Use the BIT macro
Prefer using the BIT macro instead of (1 << X). Checkpatch detected this
issue.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 19 Feb 2016 16:13:57 +0000 (16:13 +0000)]
staging: comedi: COMEDI_BUFINFO: terminate "write" command when stopped
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the current
position. An asynchronous command in the "read" direction is terminated
automatically once it has stopped and information about the final
position and error has been reported back to the user. That is not
currently done for commands in the "write" direction. Change it to
terminate the command in the "write" direction automatically. If the
command stopped with an error, report an `EPIPE` error back to the user,
otherwise just report the final buffer position back to the user.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 19 Feb 2016 16:13:56 +0000 (16:13 +0000)]
staging: comedi: COMEDI_BUFINFO: return -EPIPE for abnormal read
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the current
position. If an asynchronous command in the "read" direction has
stopped normally, the command is terminated as soon as the position has
been advanced to the end of all available data. This is not currently
done if the command terminated with an error. Change it to allow the
command to be terminated even if it stopped with an error, but report an
`EPIPE` error to the user first. The `EPIPE` error will not be
reported until the "read" position reported back to the user has been
advanced to the end of all available data.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 19 Feb 2016 16:13:55 +0000 (16:13 +0000)]
staging: comedi: COMEDI_BUFINFO: become non-busy even if bytes_read is 0
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the new
position. On input, the `bytes_read` member of `struct comedi_bufinfo`
specified the amount to advance the "read" position for an asynchronous
command in the "read" direction. If the command has already stopped
normally, and the "read" position has been advanced to the end of all
available data, the command is terminated by calling
`do_become_nonbusy()`. (That is not currently done if the command
stopped with an error.) Currently, the command is only terminated if
the user is trying to advance the "read" position by a non-zero amount.
Change it to allow the command to be terminated even if the user is not
trying to advance the "read" position. This is justifiable, as the only
time a command stops without error is when it has been set up to read a
finite amount of data.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 19 Feb 2016 16:13:54 +0000 (16:13 +0000)]
staging: comedi: COMEDI_BUFINFO: return error if no active command
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer and/or get the current buffer position. If no asynchronous
command is active (started via the file object that issued this ioctl),
this information is meaningless. Change it to return an error
(`-EINVAL`) in this case. Prior to this change, if a command was
started via a different file object, the ioctl returned `-EACCES`, but
now it will return `-EINVAL`, which is consistent with the current
behavior of the "read" and "write" file operation handlers.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 19 Feb 2016 16:13:53 +0000 (16:13 +0000)]
staging: comedi: COMEDI_BUFINFO: force bytes_written to 0 if stopped
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the new
position. On input, the `bytes_written` member of `struct
comedi_bufinfo` specifies the amount to advance the "write" position for
an asynchronous command in the "write" direction. On output, the member
indicates the amount the "write" position has actually been advanced.
Advancing the "write" position is current done even if the command has
stopped and cannot use any more written data. Change it to force the
amount successfully written to 0 in that case.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 19 Feb 2016 16:13:52 +0000 (16:13 +0000)]
staging: comedi: COMEDI_BUFINFO: update buffer before becoming non-busy
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the new
position. For an asynchronous command in the "read" direction, if the
command has finished acquiring data normally, `do_become_nonbusy()` is
called to terminate the command. That resets the buffer position, and
currently, the position information returned back to the user is after
the buffer has been reset. It should be more useful to return the
buffer position before the reset, so move the call to
`do_become_nonbusy()` after the code that gets the updated buffer
position.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 19 Feb 2016 16:13:51 +0000 (16:13 +0000)]
staging: comedi: COMEDI_BUFINFO: force bytes_read or bytes_written to 0
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the new
position. On input, the `bytes_read` member of `struct comedi_bufinfo`
specifies the amount to advance the "read" position for an asynchronous
command in the "read" direction, and the `bytes_written` member
specifies the amount to advance the "write" position for a command in
the "write" direction. The handler `do_bufinfo_ioctl()` may adjust
these by the amount the position is actually advanced before copying
them back to the user. Currently, it ignores the specified `bytes_read`
value for a command in the "write" direction, and ignores the specified
`bytes_written` for a command in the "read" direction, so the values
copied back to the user are unchanged. Change it to force the ignored
value to 0 before copying the values back to the user.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 19 Feb 2016 16:13:50 +0000 (16:13 +0000)]
staging: comedi: COMEDI_BUFINFO: get amount freed, not amount allocated
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the new
position. On input, the `bytes_read` member of `struct comedi_bufinfo`
specifies the amount to advance the "read" position for an asynchronous
command in the "read" direction, and the `bytes_written` member
specifies the amount to advance the "write" position for a command in
the "write" direction. The handler `do_bufinfo_ioctl()` may limit the
specified values according to amount of readable or writable space in
the buffer. On output, the `struct comedi_bufinfo` is filled in with
the updated position information, along with the adjusted `bytes_read`
and `bytes_written` members.
Advancing the buffer position occurs in two steps: first, some buffer
space is allocated, and second, it is freed, advancing the current
"read" or "write" position. Currently, `do_bufinfo_ioctl()` limits
`bytes_read` or `bytes_written` to the amount it could allocate in the
first step, but that is invisible and irrelevant to the ioctl user.
It's mostly irrelevant to the COMEDI internals as well, apart from
limiting how much can be freed in the second step. Change it to ignore
how much it managed to allocate in the first step and just use the
amount that was actually freed in the second step, which is the amount
the current buffer position was actually moved by this ioctl call.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Fri, 19 Feb 2016 15:27:15 +0000 (20:57 +0530)]
staging: comedi: drivers: Use DIV_ROUND_CLOSEST
The kernel.h macro DIV_ROUND_CLOSEST performs the computation
`(x +d/2)/d` but is perhaps more readable.
The Coccinelle script used is as follows:
// <smpl>
@@
expression x,__divisor;
@@
- (((x) + ((__divisor) / 2)) / (__divisor))
+ DIV_ROUND_CLOSEST(x,__divisor)
// </smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Janani Ravichandran [Thu, 18 Feb 2016 22:48:17 +0000 (17:48 -0500)]
staging: comedi: drivers: Remove unnecessary else following return
Else is unnecessary when there is a return statement in the
corresponding if block.
Coccinelle patch:
@rule1@
expression e1;
@@
if (e1) { ... return ...; }
- else{
...
- }
@rule2@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
- else
s1
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Janani Ravichandran [Thu, 18 Feb 2016 22:39:11 +0000 (17:39 -0500)]
staging: android: Remove unneeded else following a return
Remove unnecessary else when there is a return statement in the
corresponding if block.
Coccinelle patch used:
@rule1@
expression e1;
@@
if (e1) { ... return ...; }
- else{
...
- }
@rule2@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
- else
s1
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Janani Ravichandran [Thu, 18 Feb 2016 22:28:07 +0000 (17:28 -0500)]
staging: mt29f_spinand: Remove unneeded else following return
Remove unnecessary else when there is a return statement in the
corresponding if block. Coccinelle patch used:
@rule1@
expression e1;
@@
if (e1) { ... return ...; }
- else{
...
- }
@rule2@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
- else
s1
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alison Schofield [Wed, 17 Feb 2016 17:45:28 +0000 (09:45 -0800)]
staging: vt6656: simplify tests of successful urb status
Use if (status) in tests for successful urb status.
This replaces (status != 0) and (status == STATUS_SUCCESS).
(STATUS_SUCCESS is defined for NDIS status in this driver, but
was being misused)
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Thu, 18 Feb 2016 18:54:30 +0000 (00:24 +0530)]
staging: rtl8712: Replace explicit NULL comparison
Replace explicit NULL comparison with ! operator.
Found with Coccinelle.
@@
expression e;
@@
- e == NULL
+ !e
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 17 Feb 2016 08:32:58 +0000 (09:32 +0100)]
staging: rtl8712: reduce stack usage
The "translate_scan" function in rtl8712 uses a lot of stack, and
gets inlined into its single caller, r8711_wx_get_scan, which
in some configurations now blows the 1024 byte stack warning
limit:
drivers/staging/rtl8712/rtl871x_ioctl_linux.c: In function 'r8711_wx_get_scan':
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:1227:1: error: the frame size of 1032 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
This somewhat reduces the stack usage by moving the translate_scan
function out of line with the noinline_for_stack annotation.
It might be possible to modify translate_scan() a little further
to reduce the stack usage, but with this patch, we can build without
the warning, the the call chain to get here is rather predictable
(sys_ioctl->vfs_ioctl->sock_ioctl->dev_ioctl->wext_ioctl->
r8711_wx_get_scan).
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hemmo Nieminen [Fri, 19 Feb 2016 19:02:24 +0000 (21:02 +0200)]
staging: rtl8712: Improve suspend/resume functionality.
Fix a driver hang caused by earlier suspend/resume cycles. By handling a
ENODEV error during suspend as a real error we eventually end up stopping
the whole driver.
Fix this by handling the ENODEV error (during suspend) essentially by
retrying.
Signed-off-by: Hemmo Nieminen <hemmo.nieminen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Tue, 16 Feb 2016 13:01:55 +0000 (18:31 +0530)]
staging: rtl8712: Declare function as static
Declare rtl871x_intf_resume() function static since it is defined and called
in this file only.
This fixes the following sparse warning:
warning: symbol 'rtl871x_intf_resume' was not declared. Should it be static?
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Janani Ravichandran [Thu, 18 Feb 2016 22:22:50 +0000 (17:22 -0500)]
staging: fsl-mc: Remove unneeded else following a return
Remove unnecessary else when there is a return statement in the
corresponding if block. Coccinelle patch used:
@rule1@
expression e1;
@@
if (e1) { ... return ...; }
- else{
...
- }
@rule2@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
- else
s1
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Thu, 18 Feb 2016 05:49:38 +0000 (11:19 +0530)]
Staging: fsl-mc: bus: Drop owner assignment from platform_driver
For platform_driver, we don't need to set .owner field as is set by
platform driver core. The semantic patch used here first checks whether
platform_driver struct was actually used in a call to set the .owner
field.
The coccinelle script that generated the patch can be found here:
http://www.spinics.net/lists/kernel/msg2029903.html
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dilek Uzulmez [Fri, 19 Feb 2016 12:35:43 +0000 (14:35 +0200)]
Staging: octeon: Remove blank lines after open braces
This patch fixes "blank lines aren't necessary after an open brace '{'"
checkpatch.pl warning in ethernet.c
Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Fri, 19 Feb 2016 20:47:12 +0000 (22:47 +0200)]
staging: octeon: drop atomic usage from rx counters
We have only one NAPI poll running at a time, so virtual port rx counters
can be updated normally.
Update of rx_dropped can still race with the gathering of statistics,
but full accuracy is not required there.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Tue, 16 Feb 2016 22:22:18 +0000 (00:22 +0200)]
staging: octeon-usb: make driver name to match the file name
Make driver name to match the file name.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Tue, 16 Feb 2016 22:22:17 +0000 (00:22 +0200)]
staging: octeon-usb: add spaces around operator
Add spaces around operator to improve readability.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Tue, 16 Feb 2016 22:22:16 +0000 (00:22 +0200)]
staging: octeon-usb: switch to use kernel types
Switch to use kernel types:
uint64_t -> u64
uint32_t -> u32
uint16_t -> u16
uint8_t -> u8
int8_t -> s8
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Tue, 16 Feb 2016 22:22:15 +0000 (00:22 +0200)]
staging: octeon-usb: clean up includes
Clean up includes.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Tue, 16 Feb 2016 22:22:14 +0000 (00:22 +0200)]
staging: octeon-usb: delete space after cast
Delete space after cast.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Tue, 16 Feb 2016 22:22:13 +0000 (00:22 +0200)]
staging: octeon-usb: add missing braces
Some if branches are missing braces as required by coding style.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Tue, 16 Feb 2016 22:22:12 +0000 (00:22 +0200)]
staging: octeon-usb: delete redundant blank lines
Delete redundant blank lines.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Thu, 18 Feb 2016 21:43:56 +0000 (03:13 +0530)]
staging: rtl8192e: Drop useless initialisation
Removed initialisation of a varible if it is immediately reassigned.
Changes were made using Coccinelle.
@@
type T;
constant C;
expression e;
identifier i;
@@
T i
- = C
;
i = e;
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Janani Ravichandran [Tue, 16 Feb 2016 17:24:40 +0000 (12:24 -0500)]
staging: rtl8192e: Remove explicit pointer cast in assignments
In this file, the values returned by rtllib_priv() are unnecessarily cast
into a pointer type in some assignment statements. Remove the cast as it
is unneeded.
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Sat, 20 Feb 2016 11:19:50 +0000 (16:49 +0530)]
staging: rtl8192u: Remove create_workqueue()
With cmwq, use of dedicated workqueues can be replaced by system_wq.
Removed the dedicated workqueue and used system_wq instead.
Since the work items in the workqueues do not need to
be ordered, increase of concurrency by switching to system_wq should
not break anything.
All work items are sync canceled so it is guaranteed that no work is
running when driver is detached.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Tue, 16 Feb 2016 09:56:05 +0000 (15:26 +0530)]
Staging: rtl8192u: Convert long if-else block to switch-case
Replace long if-else block with switch-case to make it more readable and
compact.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anchal Jain [Mon, 15 Feb 2016 16:08:27 +0000 (21:38 +0530)]
staging: fbtft: Fix block comment coding style
Add the required leading * on subsequent lines as well as
move the */ on a separate line. Checkpatch found this issue.
Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Thu, 18 Feb 2016 22:48:24 +0000 (04:18 +0530)]
staging: rtl8188eu: core: Remove unnecessary braces
This patch removes braces for single statement blocks. The warning
was detected using checkpatch.pl.
Coccinelle was used to make the change.
@@
expression e,e1;
@@
- if (e) {
+ if (e)
e1;
- }
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Bradford [Thu, 18 Feb 2016 03:14:07 +0000 (22:14 -0500)]
staging: rtl8188eu: Remove RF_PATH_C & RF_PATH_D
RTL8188EE has a maximum of 2 RF paths (chains) so paths C and D are not
needed to support this part.
Signed-off-by: Andrew Bradford <andrew@bradfordembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Vidal [Tue, 16 Feb 2016 22:12:19 +0000 (23:12 +0100)]
Staging: rtl8188eu/core: Coding style fix, avoid line over 80 characters
Jump a new line after and operator of the test. It avoids to exceed 80
chars line, and remove a checkpatch warning.
Signed-off-by: Colin Vidal <colin@cvidal.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Vidal [Tue, 16 Feb 2016 22:12:18 +0000 (23:12 +0100)]
Staging: rtl8188eu/core: Coding style fix, set constant operand on right in tests
Remove a checkpatch warning, putting constant operant on right of two tests.
Signed-off-by: Colin Vidal <colin@cvidal.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Vidal [Tue, 16 Feb 2016 22:12:17 +0000 (23:12 +0100)]
Staging: rtl8188eu/core: Coding style fix, set conform spaces between identifiers
And a space after include keyword, making the preprocessor more
readable, and remove an unexpected space between a type and variable
name.
Signed-off-by: Colin Vidal <colin@cvidal.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Vidal [Tue, 16 Feb 2016 22:12:16 +0000 (23:12 +0100)]
Staging: rtl8188eu/core: remove paragraph which mention FSF address in comment header
As FSF address changed in the past, and can change in the future,
remove the address paragraph in the comment header, and avoid a warning
of checkpatch.
Signed-off-by: Colin Vidal <colin@cvidal.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Tue, 16 Feb 2016 14:26:05 +0000 (19:56 +0530)]
staging: rtl8188eu: core: Use put_unaligned_le16
Introduce the use of function put_unaligned_le16.
This is done using the following Coccinelle semantic patch:
//<smpl>
@@ identifier tmp; expression ptr; expression y,e; type T; @@
- tmp = cpu_to_le16(y);
<+... when != tmp
- memcpy(ptr, (T)&tmp, ...);
+ put_unaligned_le16(y,ptr);
...+>
? tmp = e
@@ type T; identifier tmp; @@
- T tmp;
...when != tmp
//</smpl>
Corresponding header file has been added too.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Mon, 15 Feb 2016 08:58:22 +0000 (14:28 +0530)]
Staging: rtl8188eu: core: rtw_xmit.c: Remove NULL test before vfree
The function vfree tests whether the argument is NULL and returns
immediately. So NULL test is not needed before vfree. Also remove blank
line between function calls.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Mon, 15 Feb 2016 08:58:20 +0000 (14:28 +0530)]
Staging: rtl8188eu: core: rtw_mlme.c: Remove NULL test before vfree
The function vfree tests whether the argument is NULL and returns
immediately. So NULL test before vfree is not needed. Also remove braces
around if branch as they are no longer needed.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhaktipriya Shridhar [Thu, 18 Feb 2016 19:30:13 +0000 (01:00 +0530)]
staging: rtl8723au: hal: Use macro ARRAY_SIZE
The macro ARRAY_SIZE is more concise to use instead of dividing
size of the array by the size of its type.
Changes were made using Coccinelle.
@@
type T;
T[] E;
@@
- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Janani Ravichandran [Thu, 18 Feb 2016 22:56:53 +0000 (17:56 -0500)]
staging: rtl8723au: Remove unnecessary else following return
Remove unnecessary else when there is a return statement in the
corresponding if block.
Coccinelle patch used:
@rule1@
expression e1;
@@
if (e1) { ... return ...; }
- else{
...
- }
@rule2@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
- else
s1
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geliang Tang [Thu, 18 Feb 2016 14:19:31 +0000 (22:19 +0800)]
staging: rtl8723au: whitespace and blank line cleaning
This patch cleans whitespaces and blank lines involved with
previous two patchs in this patch set.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geliang Tang [Thu, 18 Feb 2016 14:19:30 +0000 (22:19 +0800)]
staging: rtl8723au: core: rtw_recv: remove useless codes
There are some useless codes in rtw_free_recvframe23a_queue() and
recvframe_defrag(), so remove them.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geliang Tang [Thu, 18 Feb 2016 14:19:29 +0000 (22:19 +0800)]
staging: rtl8723au: use list_for_each_entry*()
Use list_for_each_entry*() instead of list_for_each*() to simplify
the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Mon, 15 Feb 2016 08:47:11 +0000 (14:17 +0530)]
Staging: rtl8723au: hal: Remove unused macros
The macros PlatformProcessHCICommands and PlatformTxBTQueuedPackets
are not used anywhere in the kernel so remove them.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Sat, 20 Feb 2016 09:45:38 +0000 (15:15 +0530)]
staging: most: hdm-usb: Remove create_workqueue()
With concurrency managed workqueues, use of dedicated workqueues can
be replaced by using system_wq. Drop schedule_usb_work by using
system_wq.
Since there is only one work item per buf_anchor and most_dev and they
do not need to be ordered, increase of concurrency by switching to
system_wq should not break anything.
Both work items are sync canceled before the driver can be
unregistered, to ensure no work item is pending or executing on any
CPU by the time exit path is in flight.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Thu, 18 Feb 2016 14:42:11 +0000 (20:12 +0530)]
staging: most: hdm-dim2: Replace pr_err with dev_err
Replace pr_err with dev_err when a appropriate device structure is
present.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Thu, 18 Feb 2016 14:42:00 +0000 (20:12 +0530)]
staging: most: hdm-dim2: Replace request_irq with devm_request_irq
Devm_ functions allocate memory that is released when a driver
detaches. Replace request_irq with devm_request_irq to get the
interrupt for device which is automatically freed on exit. Remove
corresponding free_irq from probe and remove functions of a platform
device.
Also, remove an unnecessary label.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Thu, 18 Feb 2016 14:41:50 +0000 (20:11 +0530)]
staging: most: hdm-dim2: Switch to devm_ioremap_resource()
Devm_ functions allocate memory that is released when a driver
detaches. Replace request_mem_region and ioremap with
devm_ioremap_resource and remove corresponding freeing functions
release_mem_region and iounmap from probe and remove functions of a
platform device.
Also, an unnecessary platform_set_drvdata() has been removed since the
driver core clears the driver data to NULL after device release or on
probe failure. There is no need to manually clear the device driver
data to NULL.
Lastly, unnecessary labels have been removed.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitoj Kaur Chawla [Thu, 18 Feb 2016 14:41:36 +0000 (20:11 +0530)]
staging: most: hdm-dim2: Replace kzalloc with devm_kzalloc
Devm_ functions allocate memory that is released when a driver detaches.
Replace kzalloc with devm_kzalloc and remove corresponding
kfrees from probe and remove functions of a platform
device.
Also, an unnecessary label has been removed.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Garcia Liebana [Thu, 18 Feb 2016 17:38:42 +0000 (18:38 +0100)]
staging: netlogic: Return zero pointer after failed kmalloc
Return a ZERO_SIZE_PTR in the xlr_config_spill function if the
kmalloc returns an invalid value. This change prevents a possible
segmentation fault as the invalid pointer is fed into PTR_ALIGN macro.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Garcia Liebana [Wed, 17 Feb 2016 08:53:07 +0000 (09:53 +0100)]
staging: netlogic: Fix indent for conditional statement
Insert code indent for conditional statements. Checkpatch detected this
issue.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Garcia Liebana [Wed, 17 Feb 2016 08:52:39 +0000 (09:52 +0100)]
staging: netlogic: Insert spaces around operator
Spaces preferred around that '/' (ctx:VxV). Checkpatch detected these
issues.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Garcia Liebana [Wed, 17 Feb 2016 08:52:06 +0000 (09:52 +0100)]
staging: netlogic: Fix comparison to NULL
Avoid the use of comparison to NULL, use !<variable> instead. Checkpatch
detected these issues.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Garcia Liebana [Wed, 17 Feb 2016 08:51:32 +0000 (09:51 +0100)]
staging: netlogic: Fix CamelCase for constants
Avoid the use of CamelCase for constants. Checkpatch detected these
issues.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Garcia Liebana [Wed, 17 Feb 2016 08:48:47 +0000 (09:48 +0100)]
staging: netlogic: Fix multiple assignments
Avoid the use of multiple assignments in a single line. Checkpatch found
this issue.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Garcia Liebana [Wed, 17 Feb 2016 08:47:33 +0000 (09:47 +0100)]
staging: netlogic: Remove blank spaces after a cast
Remove uneeded blank spaces after a cast. Checkpatch found these issues.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Garcia Liebana [Wed, 17 Feb 2016 08:46:35 +0000 (09:46 +0100)]
staging: netlogic: Fix several parentheses alignments
Align arguments with the open parenthesis. Checkpatch found these
issues.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thaissa Falbo [Thu, 18 Feb 2016 21:17:54 +0000 (19:17 -0200)]
staging: media: davinci_vpfe: remove ret variable in switch statements
Remove ret variable in functions that used it to determine the return.
Simplified the return logic for these functions.
Found with Coccinelle script:
@@
local idexpression ret;
expression c,d;
identifier label;
@@
switch ( ... ) {
case label :
...
- ret = c;
- break;
+ return c;
...
default:
...
- ret = d;
+ return d;
...
}
... when != ret
- return ret;
@@
type T; identifier i;
@@
- T i;
... when != i
Signed-off-by: Thaissa Falbo <thaissa.falbo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thaissa Falbo [Thu, 18 Feb 2016 16:18:12 +0000 (14:18 -0200)]
staging: media: davinci_vpfe: remove unnecessary ret variable
Simplified return of funcions by removing assignment of ret variable.
Coccinelle script used:
@@
local idexpression ret;
expression e;
@@
- ret = e;
- if(ret)
- return ret;
+ if(e)
+ return e;
@@
local idexpression ret;
expression e;
@@
- ret = e;
- return ret;
+ return e;
@@
local idexpression ret;
expression e;
@@
- ret = e;
- if(ret){
+ if(e){
... when != ret
- return ret;
+ return e;
}
@@
type T; identifier i;
@@
- T i;
... when != i
Signed-off-by: Thaissa Falbo <thaissa.falbo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thaissa Falbo [Mon, 15 Feb 2016 06:10:11 +0000 (04:10 -0200)]
staging:media:davinci_vpfe: Fix lines over 80 characters
Fix "line over 80 characters" checkpatch warnings
WARNING: line over 80 characters
Signed-off-by: Thaissa Falbo <thaissa.falbo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thaissa Falbo [Mon, 15 Feb 2016 05:38:39 +0000 (03:38 -0200)]
staging:media:davinci_vpfe: Fixed code identation warning as detected by checkpatch
Fixed code indentation warning as detected by checkpatch.
WARNING: suspect code indent for conditional statements (24, 40)
#1672: FILE: drivers/staging/media/davinci_vpfe/dm365_resizer.c:1672:
Signed-off-by: Thaissa Falbo <thaissa.falbo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>