OSDN Git Service
Jens Axboe [Thu, 5 Dec 2019 02:56:40 +0000 (19:56 -0700)]
io_uring: use hash table for poll command lookups
We recently changed this from a single list to an rbtree, but for some
real life workloads, the rbtree slows down the submission/insertion
case enough so that it's the top cycle consumer on the io_uring side.
In testing, using a hash table is a more well rounded compromise. It
is fast for insertion, and as long as it's sized appropriately, it
works well for the cancellation case as well. Running TAO with a lot
of network sockets, this removes io_poll_req_insert() from spending
2% of the CPU cycles.
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Thu, 5 Dec 2019 00:19:44 +0000 (17:19 -0700)]
io-wq: clear node->next on list deletion
If someone removes a node from a list, and then later adds it back to
a list, we can have invalid data in ->next. This can cause all sorts
of issues. One such use case is the IORING_OP_POLL_ADD command, which
will do just that if we race and get woken twice without any pending
events. This is a pretty rare case, but can happen under extreme loads.
Dan reports that he saw the following crash:
BUG: kernel NULL pointer dereference, address:
0000000000000000
PGD
d283ce067 P4D
d283ce067 PUD
e5ca04067 PMD 0
Oops: 0002 [#1] SMP
CPU: 17 PID: 10726 Comm: tao:fast-fiber Kdump: loaded Not tainted
5.2.9-02851-gac7bc042d2d1 #116
Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A17 05/03/2019
RIP: 0010:io_wqe_enqueue+0x3e/0xd0
Code: 34 24 74 55 8b 47 58 48 8d 6f 50 85 c0 74 50 48 89 df e8 35 7c 75 00 48 83 7b 08 00 48 8b 14 24 0f 84 84 00 00 00 48 8b 4b 10 <48> 89 11 48 89 53 10 83 63 20 fe 48 89 c6 48 89 df e8 0c 7a 75 00
RSP: 0000:
ffffc90006858a08 EFLAGS:
00010082
RAX:
0000000000000002 RBX:
ffff889037492fc0 RCX:
0000000000000000
RDX:
ffff888e40cc11a8 RSI:
ffff888e40cc11a8 RDI:
ffff889037492fc0
RBP:
ffff889037493010 R08:
00000000000000c3 R09:
ffffc90006858ab8
R10:
0000000000000000 R11:
0000000000000000 R12:
ffff888e40cc11a8
R13:
0000000000000000 R14:
00000000000000c3 R15:
ffff888e40cc1100
FS:
00007fcddc9db700(0000) GS:
ffff88903fa40000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000000 CR3:
0000000e479f5003 CR4:
00000000007606e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
PKRU:
55555554
Call Trace:
<IRQ>
io_poll_wake+0x12f/0x2a0
__wake_up_common+0x86/0x120
__wake_up_common_lock+0x7a/0xc0
sock_def_readable+0x3c/0x70
tcp_rcv_established+0x557/0x630
tcp_v6_do_rcv+0x118/0x3c0
tcp_v6_rcv+0x97e/0x9d0
ip6_protocol_deliver_rcu+0xe3/0x440
ip6_input+0x3d/0xc0
? ip6_protocol_deliver_rcu+0x440/0x440
ipv6_rcv+0x56/0xd0
? ip6_rcv_finish_core.isra.18+0x80/0x80
__netif_receive_skb_one_core+0x50/0x70
netif_receive_skb_internal+0x2f/0xa0
napi_gro_receive+0x125/0x150
mlx5e_handle_rx_cqe+0x1d9/0x5a0
? mlx5e_poll_tx_cq+0x305/0x560
mlx5e_poll_rx_cq+0x49f/0x9c5
mlx5e_napi_poll+0xee/0x640
? smp_reschedule_interrupt+0x16/0xd0
? reschedule_interrupt+0xf/0x20
net_rx_action+0x286/0x3d0
__do_softirq+0xca/0x297
irq_exit+0x96/0xa0
do_IRQ+0x54/0xe0
common_interrupt+0xf/0xf
</IRQ>
RIP: 0033:0x7fdc627a2e3a
Code: 31 c0 85 d2 0f 88 f6 00 00 00 55 48 89 e5 41 57 41 56 4c 63 f2 41 55 41 54 53 48 83 ec 18 48 85 ff 0f 84 c7 00 00 00 48 8b 07 <41> 89 d4 49 89 f5 48 89 fb 48 85 c0 0f 84 64 01 00 00 48 83 78 10
when running a networked workload with about 5000 sockets being polled
for. Fix this by clearing node->next when the node is being removed from
the list.
Fixes:
6206f0e180d4 ("io-wq: shrink io_wq_work a bit")
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Wed, 4 Dec 2019 18:08:05 +0000 (11:08 -0700)]
io_uring: ensure deferred timeouts copy necessary data
If we defer a timeout, we should ensure that we copy the timespec
when we have consumed the sqe. This is similar to commit
f67676d160c6
for read/write requests. We already did this correctly for timeouts
deferred as links, but do it generally and use the infrastructure added
by commit
1a6b74fc8702 instead of having the timeout deferral use its
own.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Wed, 4 Dec 2019 17:34:03 +0000 (10:34 -0700)]
io_uring: allow IO_SQE_* flags on IORING_OP_TIMEOUT
There's really no reason why we forbid things like link/drain etc on
regular timeout commands. Enable the usual SQE flags on timeouts.
Reported-by: 李通洲 <carter.li@eoitek.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Wed, 4 Dec 2019 16:17:41 +0000 (09:17 -0700)]
null_blk: remove unused variable warning on !CONFIG_BLK_DEV_ZONED
If BLK_DEV_ZONED isn't set, 'ret' isn't used. This makes gcc complain,
rightfully. Move ret where it is used.
Fixes:
979d54475e0b ("null_blk: cleanup null_gendisk_register")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Wed, 4 Dec 2019 11:31:15 +0000 (19:31 +0800)]
brd: warn on un-aligned buffer
Queue dma alignment limit requires users(fs, target, ...) of block layer
to pass aligned buffer.
So far brd doesn't support un-aligned buffer, even though it is easy
to support it.
However, given brd is often used for debug purpose, and there are other
drivers which can't support un-aligned buffer too.
So add warning so that brd users know what to fix.
Reported-by: Stephen Rust <srust@blockbridge.com>
Cc: Stephen Rust <srust@blockbridge.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Wed, 4 Dec 2019 11:31:14 +0000 (19:31 +0800)]
brd: remove max_hw_sectors queue limit
Now we depend on blk_queue_split() to respect most of queue limit
(the only one exception could be dma alignment), however
blk_queue_split() isn't used for brd, so this limit isn't respected
since v4.3.
Also max_hw_sectors limit doesn't play a big role for brd, which is
added since brd is added to tree for unknown reason.
So remove it.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
SeongJae Park [Tue, 26 Nov 2019 15:36:05 +0000 (16:36 +0100)]
xen/blkback: Avoid unmapping unmapped grant pages
For each I/O request, blkback first maps the foreign pages for the
request to its local pages. If an allocation of a local page for the
mapping fails, it should unmap every mapping already made for the
request.
However, blkback's handling mechanism for the allocation failure does
not mark the remaining foreign pages as unmapped. Therefore, the unmap
function merely tries to unmap every valid grant page for the request,
including the pages not mapped due to the allocation failure. On a
system that fails the allocation frequently, this problem leads to
following kernel crash.
[ 372.012538] BUG: unable to handle kernel NULL pointer dereference at
0000000000000001
[ 372.012546] IP: [<
ffffffff814071ac>] gnttab_unmap_refs.part.7+0x1c/0x40
[ 372.012557] PGD
16f3e9067 PUD
16426e067 PMD 0
[ 372.012562] Oops: 0002 [#1] SMP
[ 372.012566] Modules linked in: act_police sch_ingress cls_u32
...
[ 372.012746] Call Trace:
[ 372.012752] [<
ffffffff81407204>] gnttab_unmap_refs+0x34/0x40
[ 372.012759] [<
ffffffffa0335ae3>] xen_blkbk_unmap+0x83/0x150 [xen_blkback]
...
[ 372.012802] [<
ffffffffa0336c50>] dispatch_rw_block_io+0x970/0x980 [xen_blkback]
...
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset
This commit fixes this problem by marking the grant pages of the given
request that didn't mapped due to the allocation failure as invalid.
Fixes:
c6cc142dac52 ("xen-blkback: use balloon pages for all mappings")
Reviewed-by: David Woodhouse <dwmw@amazon.de>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Paul Durrant <pdurrant@amazon.co.uk>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Tue, 3 Dec 2019 18:23:54 +0000 (11:23 -0700)]
io_uring: handle connect -EINPROGRESS like -EAGAIN
Right now we return it to userspace, which means the application has
to poll for the socket to be writeable. Let's just treat it like
-EAGAIN and have io_uring handle it internally, this makes it much
easier to use.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Tue, 3 Dec 2019 09:39:08 +0000 (10:39 +0100)]
block: set the zone size in blk_revalidate_disk_zones atomically
The current zone revalidation code has a major problem in that it
doesn't update the zone size and q->nr_zones atomically, leading
to a short window where an out of bounds access to the zone arrays
is possible.
To fix this move the setting of the zone size into the crticial
sections blk_revalidate_disk_zones so that it gets updated together
with the zone bitmaps and q->nr_zones. This also slightly simplifies
the caller as it deducts the zone size from the report_zones.
This change also allows to check for a power of two zone size in generic
code.
Reported-by: Hans Holmberg <hans@owltronix.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Tue, 3 Dec 2019 09:39:07 +0000 (10:39 +0100)]
block: don't handle bio based drivers in blk_revalidate_disk_zones
bio based drivers only need to update q->nr_zones. Do that manually
instead of overloading blk_revalidate_disk_zones to keep that function
simpler for the next round of changes that will rely even more on the
request based functionality.
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Tue, 3 Dec 2019 09:39:06 +0000 (10:39 +0100)]
block: allocate the zone bitmaps lazily
Allocate the conventional zone bitmap and the sequential zone locking
bitmap only when we find a zone of the respective type. This avoids
wasting memory on the conventional zone bitmap for devices that only
have sequential zones, and will also prepare for other future changes.
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Tue, 3 Dec 2019 09:39:05 +0000 (10:39 +0100)]
block: replace seq_zones_bitmap with conv_zones_bitmap
Invert the meaning of seq_zones_bitmap by keeping a bitmap of
conventional zones. This allows not having a bitmap for devices
that do not have conventional zones.
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Tue, 3 Dec 2019 09:39:04 +0000 (10:39 +0100)]
block: simplify blkdev_nr_zones
Simplify the arguments to blkdev_nr_zones by passing a gendisk instead
of the block_device and capacity. This also removes the need for
__blkdev_nr_zones as all callers are outside the fast path and can
deal with the additional branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Tue, 3 Dec 2019 09:39:03 +0000 (10:39 +0100)]
block: remove the empty line at the end of blk-zoned.c
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Tue, 3 Dec 2019 09:39:02 +0000 (10:39 +0100)]
null_blk: cleanup null_gendisk_register
Use a saner size calculation, and do a trivial cleanup on the zone
revalidation to prepare to future changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 3 Dec 2019 09:39:01 +0000 (10:39 +0100)]
null_blk: fix zone size paramter check
For zoned=1 mode, the zone size must be a power of 2. Check this not
only when the zone size is specified during modprobe, but also when
creating a zoned null_blk device using configfs.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Sat, 30 Nov 2019 20:23:52 +0000 (23:23 +0300)]
block: optimise bvec_iter_advance()
bvec_iter_advance() is quite popular, but compilers fail to do proper
alias analysis and optimise it good enough. The assembly is checked
for gcc 9.2, x86-64.
- remove @iter->bi_size from min(...), as it's always less than @bytes.
Modify at the beginning and forget about it.
- the compiler isn't able to collapse memory dependencies and remove
writes in the loop. Help it by explicitely using local vars.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jackie Liu [Mon, 2 Dec 2019 09:14:53 +0000 (17:14 +0800)]
io_uring: remove io_wq_current_is_worker
Since commit
b18fdf71e01f ("io_uring: simplify io_req_link_next()"),
the io_wq_current_is_worker function is no longer needed, clean it
up.
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jackie Liu [Mon, 2 Dec 2019 09:14:52 +0000 (17:14 +0800)]
io_uring: remove parameter ctx of io_submit_state_start
Parameter ctx we have never used, clean it up.
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Tue, 3 Dec 2019 01:51:26 +0000 (18:51 -0700)]
io_uring: mark us with IORING_FEAT_SUBMIT_STABLE
If this flag is set, applications can be certain that any data for
async offload has been consumed when the kernel has consumed the
SQE.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Mon, 2 Dec 2019 23:28:46 +0000 (16:28 -0700)]
io_uring: ensure async punted connect requests copy data
Just like commit
f67676d160c6 for read/write requests, this one ensures
that the sockaddr data has been copied for IORING_OP_CONNECT if we need
to punt the request to async context.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Tue, 3 Dec 2019 01:50:25 +0000 (18:50 -0700)]
io_uring: ensure async punted sendmsg/recvmsg requests copy data
Just like commit
f67676d160c6 for read/write requests, this one ensures
that the msghdr data is fully copied if we need to punt a recvmsg or
sendmsg system call to async context.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Mon, 2 Dec 2019 18:03:47 +0000 (11:03 -0700)]
io_uring: ensure async punted read/write requests copy iovec
Currently we don't copy the iovecs when we punt to async context. This
can be problematic for applications that store the iovec on the stack,
as they often assume that it's safe to let the iovec go out of scope
as soon as IO submission has been called. This isn't always safe, as we
will re-copy the iovec once we're in async context.
Make this 100% safe by copying the iovec just once. With this change,
applications may safely store the iovec on the stack for all cases.
Reported-by: 李通洲 <carter.li@eoitek.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Mon, 2 Dec 2019 17:33:15 +0000 (10:33 -0700)]
io_uring: add general async offload context
Right now we just copy the sqe for async offload, but we want to store
more context across an async punt. In preparation for doing so, put the
sqe copy inside a structure that we can expand. With this pointer added,
we can get rid of REQ_F_FREE_SQE, as that is now indicated by whether
req->io is NULL or not.
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Eric Biggers [Mon, 2 Dec 2019 18:21:34 +0000 (10:21 -0800)]
block: don't send uevent for empty disk when not invalidating
Commit
6917d0689993 ("block: merge invalidate_partitions into
rescan_partitions") caused a regression where systemd-udevd spins
forever using max CPU starting at boot time.
It's caused by a behavior change where a KOBJ_CHANGE uevent is now sent
in a case where previously it wasn't.
Restore the old behavior.
Fixes:
6917d0689993 ("block: merge invalidate_partitions into rescan_partitions")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Tue, 3 Dec 2019 01:49:10 +0000 (18:49 -0700)]
io_uring: transform send/recvmsg() -ERESTARTSYS to -EINTR
We should never return -ERESTARTSYS to userspace, transform it into
-EINTR.
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Mon, 2 Dec 2019 15:50:00 +0000 (08:50 -0700)]
io_uring: use current task creds instead of allocating a new one
syzbot reports:
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 9217 Comm: io_uring-sq Not tainted 5.4.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:creds_are_invalid kernel/cred.c:792 [inline]
RIP: 0010:__validate_creds include/linux/cred.h:187 [inline]
RIP: 0010:override_creds+0x9f/0x170 kernel/cred.c:550
Code: ac 25 00 81 fb 64 65 73 43 0f 85 a3 37 00 00 e8 17 ab 25 00 49 8d 7c
24 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84
c0 74 08 3c 03 0f 8e 96 00 00 00 41 8b 5c 24 10 bf
RSP: 0018:
ffff88809c45fda0 EFLAGS:
00010202
RAX:
dffffc0000000000 RBX:
0000000043736564 RCX:
ffffffff814f3318
RDX:
0000000000000002 RSI:
ffffffff814f3329 RDI:
0000000000000010
RBP:
ffff88809c45fdb8 R08:
ffff8880a3aac240 R09:
ffffed1014755849
R10:
ffffed1014755848 R11:
ffff8880a3aac247 R12:
0000000000000000
R13:
ffff888098ab1600 R14:
0000000000000000 R15:
0000000000000000
FS:
0000000000000000(0000) GS:
ffff8880ae800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007ffd51c40664 CR3:
0000000092641000 CR4:
00000000001406f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
io_sq_thread+0x1c7/0xa20 fs/io_uring.c:3274
kthread+0x361/0x430 kernel/kthread.c:255
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
Modules linked in:
---[ end trace
f2e1a4307fbe2245 ]---
RIP: 0010:creds_are_invalid kernel/cred.c:792 [inline]
RIP: 0010:__validate_creds include/linux/cred.h:187 [inline]
RIP: 0010:override_creds+0x9f/0x170 kernel/cred.c:550
Code: ac 25 00 81 fb 64 65 73 43 0f 85 a3 37 00 00 e8 17 ab 25 00 49 8d 7c
24 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84
c0 74 08 3c 03 0f 8e 96 00 00 00 41 8b 5c 24 10 bf
RSP: 0018:
ffff88809c45fda0 EFLAGS:
00010202
RAX:
dffffc0000000000 RBX:
0000000043736564 RCX:
ffffffff814f3318
RDX:
0000000000000002 RSI:
ffffffff814f3329 RDI:
0000000000000010
RBP:
ffff88809c45fdb8 R08:
ffff8880a3aac240 R09:
ffffed1014755849
R10:
ffffed1014755848 R11:
ffff8880a3aac247 R12:
0000000000000000
R13:
ffff888098ab1600 R14:
0000000000000000 R15:
0000000000000000
FS:
0000000000000000(0000) GS:
ffff8880ae800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007ffd51c40664 CR3:
0000000092641000 CR4:
00000000001406f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
which is caused by slab fault injection triggering a failure in
prepare_creds(). We don't actually need to create a copy of the creds
as we're not modifying it, we just need a reference on the current task
creds. This avoids the failure case as well, and propagates the const
throughout the stack.
Fixes:
181e448d8709 ("io_uring: async workers should inherit the user creds")
Reported-by: syzbot+5320383e16029ba057ff@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Mon, 2 Dec 2019 02:45:29 +0000 (18:45 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- updates to Ilitech driver to support ILI2117
- face lift of st1232 driver to support MT-B protocol
- a new driver for i.MX system controller keys
- mpr121 driver now supports polling mode
- various input drivers have been switched away from input_polled_dev
to use polled mode of regular input devices
- other assorted cleanups and fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (70 commits)
Input: synaptics-rmi4 - fix various V4L2 compliance problems in F54
Input: synaptics - switch another X1 Carbon 6 to RMI/SMbus
Input: fix Kconfig indentation
Input: imx_sc_key - correct SCU message structure to avoid stack corruption
Input: ili210x - optionally show calibrate sysfs attribute
Input: ili210x - add resolution to chip operations structure
Input: ili210x - do not retrieve/print chip firmware version
Input: mms114 - use device_get_match_data
Input: ili210x - remove unneeded suspend and resume handlers
Input: ili210x - do not unconditionally mark touchscreen as wakeup source
Input: ili210x - define and use chip operations structure
Input: ili210x - do not set parent device explicitly
Input: ili210x - handle errors from input_mt_init_slots()
Input: ili210x - switch to using threaded IRQ
Input: ili210x - add ILI2117 support
dt-bindings: input: touchscreen: ad7879: generic node names in example
Input: ar1021 - fix typo in preprocessor macro name
Input: synaptics-rmi4 - simplify data read in rmi_f54_work
Input: kxtj9 - switch to using polled mode of input devices
Input: kxtj9 - switch to using managed resources
...
Linus Torvalds [Mon, 2 Dec 2019 02:43:25 +0000 (18:43 -0800)]
Merge tag 'libnvdimm-for-5.5' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The highlight this cycle is continuing integration fixes for PowerPC
and some resulting optimizations.
Summary:
- Updates to better support vmalloc space restrictions on PowerPC
platforms.
- Cleanups to move common sysfs attributes to core 'struct
device_type' objects.
- Export the 'target_node' attribute (the effective numa node if pmem
is marked online) for regions and namespaces.
- Miscellaneous fixups and optimizations"
* tag 'libnvdimm-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits)
MAINTAINERS: Remove Keith from NVDIMM maintainers
libnvdimm: Export the target_node attribute for regions and namespaces
dax: Add numa_node to the default device-dax attributes
libnvdimm: Simplify root read-only definition for the 'resource' attribute
dax: Simplify root read-only definition for the 'resource' attribute
dax: Create a dax device_type
libnvdimm: Move nvdimm_bus_attribute_group to device_type
libnvdimm: Move nvdimm_attribute_group to device_type
libnvdimm: Move nd_mapping_attribute_group to device_type
libnvdimm: Move nd_region_attribute_group to device_type
libnvdimm: Move nd_numa_attribute_group to device_type
libnvdimm: Move nd_device_attribute_group to device_type
libnvdimm: Move region attribute group definition
libnvdimm: Move attribute groups to device type
libnvdimm: Remove prototypes for nonexistent functions
libnvdimm/btt: fix variable 'rc' set but not used
libnvdimm/pmem: Delete include of nd-core.h
libnvdimm/namespace: Differentiate between probe mapping and runtime mapping
libnvdimm/pfn_dev: Don't clear device memmap area during generic namespace probe
libnvdimm: Trivial comment fix
...
Linus Torvalds [Mon, 2 Dec 2019 02:42:02 +0000 (18:42 -0800)]
Merge tag 'mailbox-v5.5' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- omap : misc - catch error returned from pm_runtime_put_sync
- hisi : misc - drop .owner from platform_driver
- stm : change how wakeup is handled
- imx : fix - bailout on error and nuke correct irq
- imx : add support for imx7ulp platform
* tag 'mailbox-v5.5' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: imx: add support for imx v1 mu
dt-bindings: mailbox: imx-mu: add imx7ulp MU support
mailbox: imx: Clear the right interrupts at shutdown
mailbox: imx: Fix Tx doorbell shutdown path
mailbox: stm32-ipcc: Update wakeup management
mailbox: no need to set .owner platform_driver_register
mailbox/omap: Handle if CONFIG_PM is disabled
Linus Torvalds [Mon, 2 Dec 2019 02:40:28 +0000 (18:40 -0800)]
Merge tag 'hwlock-v5.5' of git://git./linux/kernel/git/andersson/remoteproc
Pull hwspinlock updates from Bjorn Andersson:
"This contains a number of cleanups to the core and several drivers, in
particular removing the requirement for drivers to implement
pm_runtime.
It also udpates the location of the git tree in MAINTAINERS"
* tag 'hwlock-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
hwspinlock: u8500_hsem: Remove redundant PM runtime implementation
hwspinlock: sprd: Remove redundant PM runtime implementation
hwspinlock: Let the PM runtime can be optional
hwspinlock: Remove BUG_ON() from the hwspinlock core
hwspinlock: sprd: Use devm_hwspin_lock_register() to register hwlock controller
hwspinlock: sprd: Use devm_add_action_or_reset() for calls to clk_disable_unprepare()
hwspinlock: sprd: Check the return value of clk_prepare_enable()
hwspinlock: sprd: Change to use devm_platform_ioremap_resource()
hwspinlock: u8500_hsem: Use devm_hwspin_lock_register() to register hwlock controller
hwspinlock: u8500_hsem: Use devm_kzalloc() to allocate memory
hwspinlock: u8500_hsem: Change to use devm_platform_ioremap_resource()
MAINTAINERS: hwspinlock: update git tree location
Linus Torvalds [Mon, 2 Dec 2019 02:39:24 +0000 (18:39 -0800)]
Merge tag 'rpmsg-v5.5' of git://git./linux/kernel/git/andersson/remoteproc
Pull rpmsg updates from Bjorn Andersson:
"This contains a number of bug fixes to the GLINK transport driver, an
off-by-one in the GLINK smem driver and a memory leak fix in the rpmsg
char driver"
* tag 'rpmsg-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
rpmsg: Fix Kconfig indentation
rpmsg: char: Simplify 'rpmsg_eptdev_release()'
rpmsg: glink: Free pending deferred work on remove
rpmsg: glink: Don't send pending rx_done during remove
rpmsg: glink: Fix rpmsg_register_device err handling
rpmsg: glink: Put an extra reference during cleanup
rpmsg: glink: Fix use after free in open_ack TIMEOUT case
rpmsg: glink: Fix reuse intents memory leak issue
rpmsg: glink: Set tail pointer to 0 at end of FIFO
rpmsg: char: release allocated memory
Linus Torvalds [Mon, 2 Dec 2019 02:35:47 +0000 (18:35 -0800)]
Merge tag 'rproc-v5.5' of git://git./linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This adds support for booting the modem processor on Qualcomm MSM8998
and carries some cleanup up and bug fixes to the framework and the
stm32 driver"
* tag 'rproc-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
Revert "dt-bindings: remoteproc: stm32: add wakeup-source"
remoteproc: stm32: fix probe error case
remoteproc: stm32: wakeup the system by wdg irq
dt-bindings: remoteproc: stm32: add wakeup-source
remoteproc: Fix wrong rvring index computation
remoteproc: stm32: use workqueue to treat mailbox callback
remoteproc: fix argument 2 of rproc_mem_entry_init
remoteproc: qcom_q6v5_mss: Add support for MSM8998
dt-bindings: remoteproc: qcom: Add Q6v5 Modem PIL binding for MSM8998
remoteproc: debug: Remove unneeded NULL check
remoteproc: remove useless typedef
Linus Torvalds [Mon, 2 Dec 2019 02:29:36 +0000 (18:29 -0800)]
Merge branch 'i2c/for-5.5' of git://git./linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C has mostly driver updates this time.
The few noteworthy changes are: the core has now support for analog
and digital filters with at91 being the first user, a core addition to
replace the NULL returning i2c_new_probed_device() with an ERR_PTR
variant, and the pxa driver has finally being moved to use the generic
I2C slave interface. We have quite a significant number of reviews per
patch this time, so thank you to all involved!"
* 'i2c/for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits)
video: fbdev: matrox: convert to i2c_new_scanned_device
i2c: icy: convert to i2c_new_scanned_device
i2c: replace i2c_new_probed_device with an ERR_PTR variant
i2c: Fix Kconfig indentation
i2c: smbus: Don't filter out duplicate alerts
i2c: i801: Correct Intel Jasper Lake SOC naming
i2c: i2c-stm32f7: fix 10-bits check in slave free id search loop
i2c: iproc: Add i2c repeated start capability
i2c: remove helpers for ref-counting clients
i2c: tegra: Use dma_request_chan() directly for channel request
i2c: sh_mobile: Use dma_request_chan() directly for channel request
i2c: qup: Use dma_request_chan() directly for channel request
i2c: at91: Use dma_request_chan() directly for channel request
i2c: rcar: Remove superfluous call to clk_get_rate()
i2c: pxa: remove unused i2c-slave APIs
i2c: pxa: migrate to new i2c_slave APIs
i2c: cros-ec-tunnel: Make the device acpi compatible
i2c: stm32f7: report dma error during probe
i2c: icy: no need to populate address for scanned device
i2c: xiic: Fix kerneldoc warnings
...
Linus Torvalds [Mon, 2 Dec 2019 02:26:56 +0000 (18:26 -0800)]
Merge tag 'for-linus-
20191129' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"I wasn't going to send this one off so soon, but unfortunately one of
the fixes from the previous pull broke the build on some archs. So I'm
sending this sooner rather than later. This contains:
- Add highmem.h include for io_uring, because of the kmap() additions
from last round. For some reason the build bot didn't spot this
even though it sat for days.
- Three minor ';' removals
- Add support for the Beurer CD-on-a-chip device
- Make io_uring work on MMU-less archs"
* tag 'for-linus-
20191129' of git://git.kernel.dk/linux-block:
io_uring: fix missing kmap() declaration on powerpc
ataflop: Remove unneeded semicolon
block: sunvdc: Remove unneeded semicolon
drbd: Remove unneeded semicolon
io_uring: add mapping support for NOMMU archs
sr_vendor: support Beurer GL50 evo CD-on-a-chip devices.
cdrom: respect device capabilities during opening action
Linus Torvalds [Mon, 2 Dec 2019 02:24:25 +0000 (18:24 -0800)]
Merge tag 'platform-drivers-x86-v5.5-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- New bootctl driver for Mellanox BlueField SoC.
- New driver to support System76 laptops.
- Temperature monitoring and fan control on Acer Aspire 7551 is now
supported.
- Previously the Huawei driver handled only hotkeys. After the
conversion to WMI it has been expanded to support newer laptop
models.
- Big refactoring of intel-speed-select tools allows to use it on Intel
CascadeLake-N systems.
- Touchscreen support for ezpad 6 m4 and Schneider SCT101CTM tablets
- Miscellaneous clean ups and fixes here and there.
* tag 'platform-drivers-x86-v5.5-1' of git://git.infradead.org/linux-platform-drivers-x86: (59 commits)
platform/x86: hp-wmi: Fix ACPI errors caused by passing 0 as input size
platform/x86: hp-wmi: Fix ACPI errors caused by too small buffer
platform/x86: intel_pmc_core: Add Comet Lake (CML) platform support to intel_pmc_core driver
platform/x86: intel_pmc_core: Fix the SoC naming inconsistency
platform/mellanox: Fix Kconfig indentation
tools/power/x86/intel-speed-select: Display TRL buckets for just base config level
tools/power/x86/intel-speed-select: Ignore missing config level
platform/x86: touchscreen_dmi: Add info for the ezpad 6 m4 tablet
tools/power/x86/intel-speed-select: Increment version
tools/power/x86/intel-speed-select: Use core count for base-freq mask
tools/power/x86/intel-speed-select: Support platform with limited Intel(R) Speed Select
tools/power/x86/intel-speed-select: Use Frequency weight for CLOS
tools/power/x86/intel-speed-select: Make CLOS frequency in MHz
tools/power/x86/intel-speed-select: Use mailbox for CLOS_PM_QOS_CONFIG
tools/power/x86/intel-speed-select: Auto mode for CLX
tools/power/x86/intel-speed-select: Correct CLX-N frequency units
tools/power/x86/intel-speed-select: Change display of "avx" to "avx2"
tools/power/x86/intel-speed-select: Extend command set for perf-profile
Add touchscreen platform data for the Schneider SCT101CTM tablet
platform/x86: intel_int0002_vgpio: Pass irqchip when adding gpiochip
...
Linus Torvalds [Mon, 2 Dec 2019 02:20:54 +0000 (18:20 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- Support for Logitech G15 (Hans de Goede)
- HID parser improvements, improving support for some devices; e.g.
Windows Precision Touchpad, products from Primax, etc. (Blaž
Hrastnik, Candle Sun)
- robustification of tablet mode support in google-whiskers driver
(Dmitry Torokhov)
- assorted small fixes, device-specific quirks and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (23 commits)
HID: rmi: Check that the RMI_STARTED bit is set before unregistering the RMI transport device
HID: quirks: remove hid-led devices from hid_have_special_driver
HID: Improve Windows Precision Touchpad detection.
HID: i2c-hid: Reset ALPS touchpads on resume
HID: i2c-hid: fix no irq after reset on raydium 3118
HID: logitech-hidpp: Silence intermittent get_battery_capacity errors
HID: i2c-hid: remove orphaned member sleep_delay
HID: quirks: Add quirk for HP MSU1465 PIXART OEM mouse
HID: core: check whether Usage Page item is after Usage ID items
HID: intel-ish-hid: Spelling s/diconnect/disconnect/
HID: google: Detect base folded usage instead of hard-coding whiskers
HID: logitech: Add depends on LEDS_CLASS to Logitech Kconfig entry
HID: lg-g15: Add support for the G510's M1-M3 and MR LEDs
HID: lg-g15: Add support for controlling the G510's RGB backlight
HID: lg-g15: Add support for the G510 keyboards' gaming keys
HID: lg-g15: Add support for the M1-M3 and MR LEDs
HID: lg-g15: Add keyboard and LCD backlight control
HID: Add driver for Logitech gaming keyboards (G15, G15 v2)
Input: Add event-codes for macro keys found on various keyboards
HID: hidraw: replace printk() with corresponding pr_xx() variant
...
Linus Torvalds [Mon, 2 Dec 2019 02:01:03 +0000 (18:01 -0800)]
Merge tag 'linux-watchdog-5.5-rc1' of git://linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- support for NCT6116D
- several small fixes and improvements
* tag 'linux-watchdog-5.5-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits)
watchdog: jz4740: Drop dependency on MACH_JZ47xx
watchdog: jz4740: Use regmap provided by TCU driver
watchdog: jz4740: Use WDT clock provided by TCU driver
dt-bindings: watchdog: sama5d4_wdt: add microchip,sam9x60-wdt compatible
watchdog: sama5d4_wdt: cleanup the bit definitions
watchdog: sprd: Fix the incorrect pointer getting from driver data
watchdog: aspeed: Fix clock behaviour for ast2600
watchdog: imx7ulp: Fix reboot hang
watchdog: make nowayout sysfs file writable
watchdog: prevent deferral of watchdogd wakeup on RT
watchdog: imx7ulp: Use definitions instead of magic values
watchdog: imx7ulp: Remove inline annotations
watchdog: imx7ulp: Remove unused structure member
watchdog: imx7ulp: Pass the wdog instance inimx7ulp_wdt_enable()
watchdog: wdat_wdt: Spelling s/configrable/configurable/
watchdog:
bd70528: Trivial function documentation fix
watchdog: cadence: Do not show error in case of deferred probe
watchdog: Fix the race between the release of watchdog_core_data and cdev
watchdog: sbc7240_wdt: Fix yet another -Wimplicit-fallthrough warning
watchdog: intel-mid_wdt: Add WATCHDOG_NOWAYOUT support
...
Linus Torvalds [Mon, 2 Dec 2019 01:56:50 +0000 (17:56 -0800)]
Merge tag 'gpio-v5.5-1' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.5 kernel cycle
Core changes:
- Expose pull up/down flags for the GPIO character device to
userspace.
After clear input from the RaspberryPi and Beagle communities, it
has been established that prototyping, industrial automation and
make communities strongly need this feature, and as we want people
to use the character device, we have implemented the simple pull
up/down interface for GPIO lines.
This means we can specify that a (chip-specific) pull up/down
resistor can be enabled, but does not offer fine-grained control
such as cases where the resistance of the same pull resistor can be
controlled (yet).
- Introduce devm_fwnode_gpiod_get_index() and start to phase out the
old symbol devm_fwnode_get_index_gpiod_from_child().
- A bit of documentation clean-up work.
- Introduce a define for GPIO line directions and deploy it in all
GPIO drivers in the drivers/gpio directory.
- Add a special callback to populate pin ranges when cooperating with
the pin control subsystem and registering ranges as part of adding
a gpiolib driver and a gpio_irq_chip driver at the same time. This
is also deployed in the Intel Merrifield driver.
New drivers:
- RDA Micro GPIO controller.
- XGS-iproc GPIO driver.
Driver improvements:
- Wake event and debounce support on the Tegra 186 driver.
- Finalize the Aspeed SGPIO driver.
- MPC8xxx uses a normal IRQ handler rather than a chained handler"
* tag 'gpio-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (64 commits)
gpio: Add TODO item for regmap helper
Documentation: gpio: driver.rst: Fix warnings
gpio: of: Fix bogus reference to gpiod_get_count()
gpiolib: Grammar s/manager/managed/
gpio: lynxpoint: Setup correct IRQ handlers
MAINTAINERS: Replace my email by one @kernel.org
gpiolib: acpi: Make acpi_gpiochip_alloc_event always return AE_OK
gpio/mpc8xxx: fix qoriq GPIO reading
gpio: mpc8xxx: Don't overwrite default irq_set_type callback
gpiolib: acpi: Print pin number on acpi_gpiochip_alloc_event errors
gpiolib: fix coding style in gpiod_hog()
drm/bridge: ti-tfp410: switch to using fwnode_gpiod_get_index()
gpio: merrifield: Pass irqchip when adding gpiochip
gpio: merrifield: Add GPIO <-> pin mapping ranges via callback
gpiolib: Introduce ->add_pin_ranges() callback
gpio: mmio: remove untrue leftover comment
gpio: em: Use platform_get_irq() to obtain interrupts
gpio: tegra186: Add debounce support
gpio: tegra186: Program interrupt route mapping
gpio: tegra186: Derive register offsets from bank/port
...
Linus Torvalds [Mon, 2 Dec 2019 00:16:31 +0000 (16:16 -0800)]
Merge tag 'mfd-next-5.5' of git://git./linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Add support for a "resource managed strongly uncachable ioremap"
call
- Provide a collection of MFD helper macros
- Remove mfd_clone_cell() from MFD core
- Add NULL de-reference protection in MFD core
- Remove superfluous function fd_platform_add_cell() from MFD core
- Honour Device Tree's request to disable a device
New Drivers:
- Add support for MediaTek MT6323 PMIC
New Device Support:
- Add support for Gemini Lake to Intel LPSS PCI
- Add support for Cherry Trail Crystal Cover PMIC to Intel SoC PMIC
CRC
- Add support for PM{I}8950 to Qualcomm SPMI PMIC
- Add support for U8420 to ST-Ericsson DB8500
- Add support for Comet Lake PCH-H to Intel LPSS PCI
New Functionality:
- Add support for requested supply clocks; madera-core
Fix-ups:
- Lower interrupt priority; rk808
- Use provided helpers (macros, group functions, defines); rk808,
ipaq-micro, ab8500-core, db8500-prcmu, mt6397-core, cs5535-mfd
- Only allocate IRQs on request; max77620
- Use simplified API; arizona-core
- Remove redundant and/or duplicated code; wm8998-tables, arizona,
syscon
- Device Tree binding fix-ups; madera, max77650, max77693
- Remove mfd_cell->id abuse hack; cs5535-mfd
- Remove only user of mfd_clone_cell(); cs5535-mfd
- Make resources static; rohm-
bd70528
Bug Fixes:
- Fix product ID for RK818; rk808
- Fix Power Key; rk808
- Fix booting on the BananaPi; mt6397-core
- Endian fix-ups; twl.h
- Fix static error checker warnings; ti_am335x_tscadc"
* tag 'mfd-next-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (47 commits)
Revert "mfd: syscon: Set name of regmap_config"
mfd: ti_am335x_tscadc: Fix static checker warning
mfd:
bd70528: Staticize bit value definitions
mfd: mfd-core: Honour Device Tree's request to disable a child-device
dt-bindings: mfd: max77693: Fix missing curly brace
mfd: intel-lpss: Add Intel Comet Lake PCH-H PCI IDs
mfd: db8500-prcmu: Support U8420-sysclk firmware
dt-bindings: mfd: max77650: Convert the binding document to yaml
mfd: mfd-core: Move pdev->mfd_cell creation back into mfd_add_device()
mfd: mfd-core: Remove usage counting for .{en,dis}able() call-backs
x86: olpc-xo1-sci: Remove invocation of MFD's .enable()/.disable() call-backs
x86: olpc-xo1-pm: Remove invocation of MFD's .enable()/.disable() call-backs
mfd: mfd-core: Remove mfd_clone_cell()
mfd: mfd-core: Protect against NULL call-back function pointer
mfd: cs5535-mfd: Register clients using their own dedicated MFD cell entries
mfd: cs5535-mfd: Request shared IO regions centrally
mfd: cs5535-mfd: Remove mfd_cell->id hack
mfd: cs5535-mfd: Use PLATFORM_DEVID_* defines and tidy error message
mfd: intel_soc_pmic_crc: Add "cht_crystal_cove_pmic" cell to CHT cells
mfd: madera: Add support for requesting the supply clocks
...
Linus Torvalds [Mon, 2 Dec 2019 00:13:39 +0000 (16:13 -0800)]
Merge tag 'backlight-next-5.5' of git://git./linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Functionality:
- Add support for an enable GPIO; lm3630a_bl
- Add support for short circuit handling; qcom-wled
- Add support for automatic string detection; qcom-wled
Fix-ups:
- Update Device Tree bindings; lm3630a-backlight, led-backlight,
qcom-wled
- Constify; ipaq_micro_bl
- Optimise for CPU cycles; pwm_bl
- Coding style fix-ups; pwm_bl
- Trivial fix-ups (white space, comments, renaming); pwm_bl,
gpio_backlight, qcom-wled
- Kconfig dependency hacking; LCD_HP700
- Rename, refactor and add peripherals; pm8941-wled => qcom-wled
- Make use of GPIO look-up tables; tosa_bl, tosa_lcd
- Remove superfluous code; gpio_backlight
- Adapt GPIO direction handling; gpio_backlight
- Remove legacy use of platform data; gpio_backlight
Bug Fixes:
- Provide modules aliases; lm3630a_bl"
* tag 'backlight-next-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (32 commits)
backlight: qcom-wled: Fix spelling mistake "trigged" -> "triggered"
backlight: gpio: Pull gpio_backlight_initial_power_state() into probe
backlight: gpio: Use a helper variable for &pdev->dev
backlight: gpio: Remove unused fields from platform data
sh: ecovec24: don't set unused fields in platform data
backlight: gpio: Simplify the platform data handling
sh: ecovec24: add additional properties to the backlight device
backlight: gpio: Explicitly set the direction of the GPIO
backlight: gpio: Remove stray newline
backlight: gpio: Remove unneeded include
video: backlight: tosa: Use GPIO lookup table
backlight: qcom-wled: Add auto string detection logic
backlight: qcom-wled: Add support for short circuit handling
backlight: qcom-wled: Add support for WLED4 peripheral
backlight: qcom-wled: Restructure the driver for WLED3
backlight: qcom-wled: Rename PM8941* to WLED3
backlight: qcom-wled: Add new properties for PMI8998
backlight: qcom-wled: Restructure the qcom-wled bindings
backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c
dt-bindings: backlight: lm3630a: Fix missing include
...
Linus Torvalds [Mon, 2 Dec 2019 00:12:21 +0000 (16:12 -0800)]
Merge tag 'pinctrl-v5.5-2' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pinctrl fix from Linus Walleij:
"A oneliner fix adding the license to the new Intel pin controller,
avoiding a build-time warning"
* tag 'pinctrl-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: Fix warning by adding missing MODULE_LICENSE
Linus Torvalds [Mon, 2 Dec 2019 00:09:28 +0000 (16:09 -0800)]
Merge tag 'leds-5.5-rc1' of git://git./linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"This contains usual small updates to drivers, and removal of PAGE_SIZE
limits on /sys/class/leds/<led>/trigger.
We should not be really having that many triggers; but with cpu
activity triggers we do, and we'll eventually need to fix it, but...
remove the limit for now"
* tag 'leds-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (26 commits)
leds: trigger: netdev: fix handling on interface rename
leds: an30259a: add a check for devm_regmap_init_i2c
leds: mlxreg: Fix possible buffer overflow
leds: pca953x: Use of_device_get_match_data()
leds: core: Fix leds.h structure documentation
leds: core: Fix devm_classdev_match to reference correct structure
leds: core: Remove extern from header
leds: lm3601x: Convert class registration to device managed
leds: flash: Add devm_* functions to the flash class
leds: flash: Remove extern from the header file
leds: flash: Convert non extended registration to inline
leds: Kconfig: Be consistent with the usage of "LED"
leds: remove PAGE_SIZE limit of /sys/class/leds/<led>/trigger
leds: tlc591xx: update the maximum brightness
leds: lm3692x: Use flags from LM3692X_BRT_CTRL
leds: lm3692x: Use flags from LM3692X_BOOST_CTRL
leds: lm3692x: Handle failure to probe the regulator
leds: lm3692x: Don't overwrite return value in error path
leds: lm3692x: Print error value on dev_err
leds: tlc591xx: use devm_led_classdev_register_ext()
...
Linus Torvalds [Mon, 2 Dec 2019 00:06:02 +0000 (16:06 -0800)]
Merge tag 'clk-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This merge window we have one small clk provider API in the core
framework and then a bunch of driver updates and a handful of new
drivers. In terms of diffstat the Qualcomm and Amlogic drivers are
high up there because of all the clk data introcued by new drivers.
The Nvidia Tegra driver had a lot of work done this cycle too to
support suspend/resume and memory controllers. And the OMAP clk driver
got proper clk and reset handling in place.
Rounding out the patches are various updates to remove unused data,
mark things static, correct incorrect data in drivers, etc. All the
little things that improve drivers and maintain code health. I will
point out that there's a patch in here for the GPIO clk driver, that
almost nobody uses, which changes behavior and causes clk_set_rate()
to try to change the GPIO gate clk's parent. Other than that things
are fairly well SoC specific here.
Core:
- Add a clk provider API to get current parent index
- Plug a memory leak in clk_unregister() path
New Drivers:
- CGU in Ingenix X1000
- Bitmain BM1880 clks
- Qualcomm MSM8998 GPU clk controllers
- Qualcomm SC7180 GCC and RPMH clk controllers
- Qualcomm QCS404 Q6SSTOP clk controllers
- Add support for the Renesas R-Car M3-W+ (r8a77961) SoC
- Add support for the Renesas RZ/G2N (r8a774b1) SoC
- Add Tegra20/30 External Memory Clock (EMC) support
Updates:
- Make gpio gate clks propagate rate setting up to parent
- Prepare Armada 3700 for suspend to RAM by moving PCIe
suspend/resume priority
- Drop unused variables, enums, etc. in various clk drivers
- Convert various drivers to use devm_platform_ioremap_resource()
- Use struct_size() some more in various clk drivers
- Improve Rockchip px30 clk tree
- Add suspend/resume support to Tegra210 clk driver
- Reimplement SOR clks on earlier Tegra SoCs, helping HDMI and DP
- Allwinner DT exports and H6 clk tree fixes
- Proper clk and reset handling for OMAP SoCs
- Revamped TI divider clk to clamp max divider
- Make 1443X/1416X PLL clock structure common for reusing among i.MX8
SoCs
- Drop IMX7ULP_CLK_MIPI_PLL clock, it shouldn't be used
- Add VIDEO2_PLL clock for imx8mq
- Add missing gate clock for pll1/2 fixed dividers on i.MX8 SoCs
- Add sm1 support in the Amlogic audio clock controller
- Switch some clocks on R-Car Gen2/3 to .determine_rate()
- Remove Renesas R-Car Gen2 legacy DT clock support
- Improve arithmetic divisions on Renesas R-Car Gen2 and Gen3
- Improve Renesas R-Car Gen3 SD clock handling
- Add rate table for Samsung exynos542x GPU and VPLL clks
- Fix potential CPU performance degradation after system
suspend/resume cycle on exynos542x SoCs"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (160 commits)
clk: aspeed: Add RMII RCLK gates for both AST2500 MACs
MAINTAINERS: Add entry for BM1880 SoC clock driver
clk: Add common clock driver for BM1880 SoC
dt-bindings: clock: Add devicetree binding for BM1880 SoC
clk: Add clk_hw_unregister_composite helper function definition
clk: Zero init clk_init_data in helpers
clk: ingenic: Allow drivers to be built with COMPILE_TEST
MAINTAINERS: Update section for Ux500 clock drivers
clk: mark clk_disable_unused() as __init
clk: Fix memory leak in clk_unregister()
clk: Ingenic: Add CGU driver for X1000.
dt-bindings: clock: Add X1000 bindings.
clk: tegra: Use match_string() helper to simplify the code
clk: pxa: fix one of the pxa RTC clocks
clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle()
clk: armada-xp: remove unused code
clk: tegra: Fix build error without CONFIG_PM_SLEEP
clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP
clk: tegra: Optimize PLLX restore on Tegra20/30
clk: tegra: Add suspend and resume support on Tegra210
...
Linus Torvalds [Sun, 1 Dec 2019 22:00:59 +0000 (14:00 -0800)]
Merge tag 'y2038-cleanups-5.5' of git://git./linux/kernel/git/arnd/playground
Pull y2038 cleanups from Arnd Bergmann:
"y2038 syscall implementation cleanups
This is a series of cleanups for the y2038 work, mostly intended for
namespace cleaning: the kernel defines the traditional time_t, timeval
and timespec types that often lead to y2038-unsafe code. Even though
the unsafe usage is mostly gone from the kernel, having the types and
associated functions around means that we can still grow new users,
and that we may be missing conversions to safe types that actually
matter.
There are still a number of driver specific patches needed to get the
last users of these types removed, those have been submitted to the
respective maintainers"
Link: https://lore.kernel.org/lkml/20191108210236.1296047-1-arnd@arndb.de/
* tag 'y2038-cleanups-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (26 commits)
y2038: alarm: fix half-second cut-off
y2038: ipc: fix x32 ABI breakage
y2038: fix typo in powerpc vdso "LOPART"
y2038: allow disabling time32 system calls
y2038: itimer: change implementation to timespec64
y2038: move itimer reset into itimer.c
y2038: use compat_{get,set}_itimer on alpha
y2038: itimer: compat handling to itimer.c
y2038: time: avoid timespec usage in settimeofday()
y2038: timerfd: Use timespec64 internally
y2038: elfcore: Use __kernel_old_timeval for process times
y2038: make ns_to_compat_timeval use __kernel_old_timeval
y2038: socket: use __kernel_old_timespec instead of timespec
y2038: socket: remove timespec reference in timestamping
y2038: syscalls: change remaining timeval to __kernel_old_timeval
y2038: rusage: use __kernel_old_timeval
y2038: uapi: change __kernel_time_t to __kernel_old_time_t
y2038: stat: avoid 'time_t' in 'struct stat'
y2038: ipc: remove __kernel_time_t reference from headers
y2038: vdso: powerpc: avoid timespec references
...
Linus Torvalds [Sun, 1 Dec 2019 21:46:15 +0000 (13:46 -0800)]
Merge tag 'compat-ioctl-5.5' of git://git./linux/kernel/git/arnd/playground
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
"As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need
support for time64_t.
In completely unrelated work, I spent time on cleaning up parts of
this file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the
rest of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which
is the scsi ioctl handlers. I have patches for those as well, but they
need more testing or possibly a rewrite"
* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
scsi: sd: enable compat ioctls for sed-opal
pktcdvd: add compat_ioctl handler
compat_ioctl: move SG_GET_REQUEST_TABLE handling
compat_ioctl: ppp: move simple commands into ppp_generic.c
compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
compat_ioctl: unify copy-in of ppp filters
tty: handle compat PPP ioctls
compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
compat_ioctl: handle SIOCOUTQNSD
af_unix: add compat_ioctl support
compat_ioctl: reimplement SG_IO handling
compat_ioctl: move WDIOC handling into wdt drivers
fs: compat_ioctl: move FITRIM emulation into file systems
gfs2: add compat_ioctl support
compat_ioctl: remove unused convert_in_user macro
compat_ioctl: remove last RAID handling code
compat_ioctl: remove /dev/raw ioctl translation
compat_ioctl: remove PCI ioctl translation
compat_ioctl: remove joystick ioctl translation
...
Linus Torvalds [Sun, 1 Dec 2019 21:26:18 +0000 (13:26 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace
Pull sysctl system call removal from Eric Biederman:
"As far as I can tell we have reached the point where no one enables
the sysctl system call anymore. It still is enabled in a few
defconfigs but they are mostly the rarely used one and in asking
people about that it was more cut & paste enabled than anything else.
This is single commit that just deletes code. Leaving just enough code
so that the deprecated sysctl warning continues to be printed. If my
analysis turns out to be wrong and someone actually cares it will be
easy to revert this commit and have the system call again.
There was one new xtensa defconfig in linux-next that enabled the
system call this cycle and when asked about it the maintainer of the
code replied that it was not enabled on purpose. As of today's
linux-next tree that defconfig no longer enables the system call.
What we saw in the review discussion was that if we go a step farther
than my patch and mess with uapi headers there are pieces of code that
won't compile, but nothing minds the system call actually disappearing
from the kernel"
Link: https://lore.kernel.org/lkml/201910011140.EA0181F13@keescook/
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sysctl: Remove the sysctl system call
Richard Zhu [Wed, 9 Oct 2019 08:07:21 +0000 (16:07 +0800)]
mailbox: imx: add support for imx v1 mu
There is a version 1.0 MU on i.MX7ULP platform.
One new version ID register is added, and it's offset is 0.
TRn registers are defined at the offset 0x20 ~ 0x2C.
RRn registers are defined at the offset 0x40 ~ 0x4C.
SR/CR registers are defined at 0x60/0x64.
Extend this driver to support it.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Richard Zhu [Wed, 9 Oct 2019 08:07:20 +0000 (16:07 +0800)]
dt-bindings: mailbox: imx-mu: add imx7ulp MU support
There is a version 1.0 MU on imx7ulp, use "fsl,imx7ulp-mu" compatible
to support it.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Daniel Baluta [Wed, 9 Oct 2019 08:07:19 +0000 (16:07 +0800)]
mailbox: imx: Clear the right interrupts at shutdown
Make sure to only clear enabled interrupts keeping count
of the connection type.
Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Daniel Baluta [Wed, 9 Oct 2019 08:07:18 +0000 (16:07 +0800)]
mailbox: imx: Fix Tx doorbell shutdown path
Tx doorbell is handled by txdb_tasklet and doesn't
have an associated IRQ.
Anyhow, imx_mu_shutdown ignores this and tries to
free an IRQ that wasn't requested for Tx DB resulting
in the following warning:
[ 1.967644] Trying to free already-free IRQ 26
[ 1.972108] WARNING: CPU: 2 PID: 157 at kernel/irq/manage.c:1708 __free_irq+0xc0/0x358
[ 1.980024] Modules linked in:
[ 1.983088] CPU: 2 PID: 157 Comm: kworker/2:1 Tainted: G
[ 1.993524] Hardware name: Freescale i.MX8QXP MEK (DT)
[ 1.998668] Workqueue: events deferred_probe_work_func
[ 2.003812] pstate:
60000085 (nZCv daIf -PAN -UAO)
[ 2.008607] pc : __free_irq+0xc0/0x358
[ 2.012364] lr : __free_irq+0xc0/0x358
[ 2.016111] sp :
ffff00001179b7e0
[ 2.019422] x29:
ffff00001179b7e0 x28:
0000000000000018
[ 2.024736] x27:
ffff000011233000 x26:
0000000000000004
[ 2.030053] x25:
000000000000001a x24:
ffff80083bec74d4
[ 2.035369] x23:
0000000000000000 x22:
ffff80083bec7588
[ 2.040686] x21:
ffff80083b1fe8d8 x20:
ffff80083bec7400
[ 2.046003] x19:
0000000000000000 x18:
ffffffffffffffff
[ 2.051320] x17:
0000000000000000 x16:
0000000000000000
[ 2.056637] x15:
ffff0000111296c8 x14:
ffff00009179b517
[ 2.061953] x13:
ffff00001179b525 x12:
ffff000011142000
[ 2.067270] x11:
ffff000011129f20 x10:
ffff0000105da970
[ 2.072587] x9 :
00000000ffffffd0 x8 :
0000000000000194
[ 2.077903] x7 :
612065657266206f x6 :
ffff0000111e7b09
[ 2.083220] x5 :
0000000000000003 x4 :
0000000000000000
[ 2.088537] x3 :
0000000000000000 x2 :
00000000ffffffff
[ 2.093854] x1 :
28b70f0a2b60a500 x0 :
0000000000000000
[ 2.099173] Call trace:
[ 2.101618] __free_irq+0xc0/0x358
[ 2.105021] free_irq+0x38/0x98
[ 2.108170] imx_mu_shutdown+0x90/0xb0
[ 2.111921] mbox_free_channel.part.2+0x24/0xb8
[ 2.116453] mbox_free_channel+0x18/0x28
This bug is present from the beginning of times.
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Fabien Dessenne [Wed, 30 Oct 2019 13:57:01 +0000 (14:57 +0100)]
mailbox: stm32-ipcc: Update wakeup management
The wakeup specific IRQ management is no more needed to wake up the
stm32 platform. A relationship has been established between the EXTI and
the RX IRQ, just need to declare the EXTI interrupt instead of the
IPCC RX IRQ.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Linus Torvalds [Sun, 1 Dec 2019 01:23:16 +0000 (17:23 -0800)]
Merge tag 'seccomp-v5.5-rc1' of git://git./linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"Mostly this is implementing the new flag SECCOMP_USER_NOTIF_FLAG_CONTINUE,
but there are cleanups as well.
- implement SECCOMP_USER_NOTIF_FLAG_CONTINUE (Christian Brauner)
- fixes to selftests (Christian Brauner)
- remove secure_computing() argument (Christian Brauner)"
* tag 'seccomp-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: rework define for SECCOMP_USER_NOTIF_FLAG_CONTINUE
seccomp: fix SECCOMP_USER_NOTIF_FLAG_CONTINUE test
seccomp: simplify secure_computing()
seccomp: test SECCOMP_USER_NOTIF_FLAG_CONTINUE
seccomp: add SECCOMP_USER_NOTIF_FLAG_CONTINUE
seccomp: avoid overflow in implicit constant conversion
Linus Torvalds [Sun, 1 Dec 2019 01:01:48 +0000 (17:01 -0800)]
Merge tag 'audit-pr-
20191126' of git://git./linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Audit is back for v5.5, albeit with only two patches:
- Allow for the auditing of suspicious O_CREAT usage via the new
AUDIT_ANOM_CREAT record.
- Remove a redundant if-conditional check found during code analysis.
It's a minor change, but when the pull request is only two patches
long, you need filler in the pull request email"
[ Heh on the pull request filler. I wish more people tried to write
better pull request messages, even if maybe it's not worth it for the
trivial cases ;^) - Linus ]
* tag 'audit-pr-
20191126' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: remove redundant condition check in kauditd_thread()
audit: Report suspicious O_CREAT usage
Linus Torvalds [Sun, 1 Dec 2019 00:55:37 +0000 (16:55 -0800)]
Merge tag 'selinux-pr-
20191126' of git://git./linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"Only three SELinux patches for v5.5:
- Remove the size limit on SELinux policies, the limitation was a
lingering vestige and no longer necessary.
- Allow file labeling before the policy is loaded. This should ease
some of the burden when the policy is initially loaded (no need to
relabel files), but it should also help enable some new system
concepts which dynamically create the root filesystem in the
initrd.
- Add support for the "greatest lower bound" policy construct which
is defined as the intersection of the MLS range of two SELinux
labels"
* tag 'selinux-pr-
20191126' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: default_range glblub implementation
selinux: allow labeling before policy is loaded
selinux: remove load size limit
Linus Torvalds [Sun, 1 Dec 2019 00:41:55 +0000 (16:41 -0800)]
Merge tag 'kgdb-5.5-rc1' of git://git./linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"The major change here is the work from Douglas Anderson that reworks
the way kdb stack traces are handled on SMP systems. The effect is to
allow all CPUs to issue their stack trace which reduced the need for
architecture specific code to support stack tracing.
Also included are general of clean ups from Doug and myself:
- Remove some unused variables or arguments.
- Tidy up the kdb escape handling code and fix a couple of odd corner
cases.
- Better ignore escape characters that do not form part of an escape
sequence. This mostly benefits vi users since they are most likely
to press escape as a nervous habit but it won't harm anyone else"
* tag 'kgdb-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: Tweak escape handling for vi users
kdb: Improve handling of characters from different input sources
kdb: Remove special case logic from kdb_read()
kdb: Simplify code to fetch characters from console
kdb: Tidy up code to handle escape sequences
kdb: Avoid array subscript warnings on non-SMP builds
kdb: Fix stack crawling on 'running' CPUs that aren't the master
kdb: Fix "btc <cpu>" crash if the CPU didn't round up
kdb: Remove unused "argcount" param from kdb_bt1(); make btaprompt bool
kgdb: Remove unused DCPU_SSTEP definition
Linus Torvalds [Sat, 30 Nov 2019 22:50:51 +0000 (14:50 -0800)]
Merge tag 'hyperv-next-signed' of git://git./linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Sasha Levin:
- support for new VMBus protocols (Andrea Parri)
- hibernation support (Dexuan Cui)
- latency testing framework (Branden Bonaby)
- decoupling Hyper-V page size from guest page size (Himadri Pandya)
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits)
Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic
drivers/hv: Replace binary semaphore with mutex
drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86
HID: hyperv: Add the support of hibernation
hv_balloon: Add the support of hibernation
x86/hyperv: Implement hv_is_hibernation_supported()
Drivers: hv: balloon: Remove dependencies on guest page size
Drivers: hv: vmbus: Remove dependencies on guest page size
x86: hv: Add function to allocate zeroed page for Hyper-V
Drivers: hv: util: Specify ring buffer size using Hyper-V page size
Drivers: hv: Specify receive buffer size using Hyper-V page size
tools: hv: add vmbus testing tool
drivers: hv: vmbus: Introduce latency testing
video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver
video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host
hv_netvsc: Add the support of hibernation
hv_sock: Add the support of hibernation
video: hyperv_fb: Add the support of hibernation
scsi: storvsc: Add the support of hibernation
Drivers: hv: vmbus: Add module parameter to cap the VMBus version
...
Linus Torvalds [Sat, 30 Nov 2019 22:49:08 +0000 (14:49 -0800)]
Merge branch 'ras-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RAS fix from Borislav Petkov:
"One urgent fix for the thermal throttling machinery: the recent change
reworking the thermal notifications forgot to mask out read-only and
reserved bits in the thermal status MSRs, leading to exceptions while
writing those MSRs.
The fix takes care of masking out those bits first"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce/therm_throt: Mask out read-only and reserved MSR bits
Linus Torvalds [Sat, 30 Nov 2019 22:45:32 +0000 (14:45 -0800)]
Merge branch 'parisc-5.5-1' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Just trivial small updates: An assembler register optimization in the
inlined networking checksum functions, a compiler warning fix and
don't unneccesary print a runtime warning on machines which wouldn't
be affected anyway"
* 'parisc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Avoid spurious inequivalent alias kernel error messages
kexec: Fix pointer-to-int-cast warnings
parisc: Do not hardcode registers in checksum functions
Linus Torvalds [Sat, 30 Nov 2019 22:35:43 +0000 (14:35 -0800)]
Merge tag 'powerpc-5.5-1' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Highlights:
- Infrastructure for secure boot on some bare metal Power9 machines.
The firmware support is still in development, so the code here
won't actually activate secure boot on any existing systems.
- A change to xmon (our crash handler / pseudo-debugger) to restrict
it to read-only mode when the kernel is lockdown'ed, otherwise it's
trivial to drop into xmon and modify kernel data, such as the
lockdown state.
- Support for KASLR on 32-bit BookE machines (Freescale / NXP).
- Fixes for our flush_icache_range() and __kernel_sync_dicache()
(VDSO) to work with memory ranges >4GB.
- Some reworks of the pseries CMM (Cooperative Memory Management)
driver to make it behave more like other balloon drivers and enable
some cleanups of generic mm code.
- A series of fixes to our hardware breakpoint support to properly
handle unaligned watchpoint addresses.
Plus a bunch of other smaller improvements, fixes and cleanups.
Thanks to: Alastair D'Silva, Andrew Donnellan, Aneesh Kumar K.V,
Anthony Steinhauser, Cédric Le Goater, Chris Packham, Chris Smart,
Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio
Carvalho, Daniel Axtens, David Hildenbrand, Deb McLemore, Diana
Craciun, Eric Richter, Geert Uytterhoeven, Greg Kroah-Hartman, Greg
Kurz, Gustavo L. F. Walbon, Hari Bathini, Harish, Jason Yan, Krzysztof
Kozlowski, Leonardo Bras, Mathieu Malaterre, Mauro S. M. Rodrigues,
Michal Suchanek, Mimi Zohar, Nathan Chancellor, Nathan Lynch, Nayna
Jain, Nick Desaulniers, Oliver O'Halloran, Qian Cai, Rasmus Villemoes,
Ravi Bangoria, Sam Bobroff, Santosh Sivaraj, Scott Wood, Thomas Huth,
Tyrel Datwyler, Vaibhav Jain, Valentin Longchamp, YueHaibing"
* tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (144 commits)
powerpc/fixmap: fix crash with HIGHMEM
x86/efi: remove unused variables
powerpc: Define arch_is_kernel_initmem_freed() for lockdep
powerpc/prom_init: Use -ffreestanding to avoid a reference to bcmp
powerpc: Avoid clang warnings around setjmp and longjmp
powerpc: Don't add -mabi= flags when building with Clang
powerpc: Fix Kconfig indentation
powerpc/fixmap: don't clear fixmap area in paging_init()
selftests/powerpc: spectre_v2 test must be built 64-bit
powerpc/powernv: Disable native PCIe port management
powerpc/kexec: Move kexec files into a dedicated subdir.
powerpc/32: Split kexec low level code out of misc_32.S
powerpc/sysdev: drop simple gpio
powerpc/83xx: map IMMR with a BAT.
powerpc/32s: automatically allocate BAT in setbat()
powerpc/ioremap: warn on early use of ioremap()
powerpc: Add support for GENERIC_EARLY_IOREMAP
powerpc/fixmap: Use __fix_to_virt() instead of fix_to_virt()
powerpc/8xx: use the fixmapped IMMR in cpm_reset()
powerpc/8xx: add __init to cpm1 init functions
...
Linus Torvalds [Sat, 30 Nov 2019 22:29:19 +0000 (14:29 -0800)]
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- improve ARM implementation of pfn_valid()
- various sparse fixes
- spelling fixes
- add further ARMv8 debug architecture versions
- clang fix for decompressor
- update to generic vDSO
- remove Brahma-B53 from spectre hardening
- initialise broadcast hrtimer device
- use correct nm executable in decompressor
- remove old mcount et.al.
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (26 commits)
ARM: 8940/1: ftrace: remove mcount(),ftrace_caller_old() and ftrace_call_old()
ARM: 8939/1: kbuild: use correct nm executable
ARM: 8938/1: kernel: initialize broadcast hrtimer based clock event device
ARM: 8937/1: spectre-v2: remove Brahma-B53 from hardening
ARM: 8933/1: replace Sun/Solaris style flag on section directive
ARM: 8932/1: Add clock_gettime64 entry point
ARM: 8931/1: Add clock_getres entry point
ARM: 8930/1: Add support for generic vDSO
ARM: 8929/1: use APSR_nzcv instead of r15 as mrc operand
ARM: 8927/1: ARM/hw_breakpoint: add more ARMv8 debug architecture versions support
ARM: 8918/2: only build return_address() if needed
ARM: 8928/1: ARM_ERRATA_775420: Spelling s/date/data/
ARM: 8925/1: tcm: include <asm/tcm.h> for missing declarations
ARM: 8924/1: tcm: make dtcm_end and itcm_end static
ARM: 8923/1: mm: include <asm/vga.h> for vga_base
ARM: 8922/1: parse_dt_topology() rate is pointer to __be32
ARM: 8920/1: share get_signal_page from signal.c to process.c
ARM: 8919/1: make unexported functions static
ARM: 8917/1: mm: include <asm/set_memory.h>
ARM: 8916/1: mm: make set_section_perms() static
...
Linus Torvalds [Sat, 30 Nov 2019 22:28:11 +0000 (14:28 -0800)]
Merge tag 'nds32-for-linus-5.5-rc1' of git://git./linux/kernel/git/greentime/linux
Pull nds32 updates from Greentime Hu:
- code clean up
- add a nds32 maintainer
* tag 'nds32-for-linus-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux:
MAINTAINERS: add nds32 maintainer
nds32: Move static keyword to the front of declaration
nds32: Fix typo in Kconfig.cpu
nds32: remove unneeded clean-files for DTB
Linus Torvalds [Sat, 30 Nov 2019 22:12:13 +0000 (14:12 -0800)]
Merge tag 'notifications-pipe-prep-
20191115' of git://git./linux/kernel/git/dhowells/linux-fs
Pull pipe rework from David Howells:
"This is my set of preparatory patches for building a general
notification queue on top of pipes. It makes a number of significant
changes:
- It removes the nr_exclusive argument from __wake_up_sync_key() as
this is always 1. This prepares for the next step:
- Adds wake_up_interruptible_sync_poll_locked() so that poll can be
woken up from a function that's holding the poll waitqueue
spinlock.
- Change the pipe buffer ring to be managed in terms of unbounded
head and tail indices rather than bounded index and length. This
means that reading the pipe only needs to modify one index, not
two.
- A selection of helper functions are provided to query the state of
the pipe buffer, plus a couple to apply updates to the pipe
indices.
- The pipe ring is allowed to have kernel-reserved slots. This allows
many notification messages to be spliced in by the kernel without
allowing userspace to pin too many pages if it writes to the same
pipe.
- Advance the head and tail indices inside the pipe waitqueue lock
and use wake_up_interruptible_sync_poll_locked() to poke poll
without having to take the lock twice.
- Rearrange pipe_write() to preallocate the buffer it is going to
write into and then drop the spinlock. This allows kernel
notifications to then be added the ring whilst it is filling the
buffer it allocated. The read side is stalled because the pipe
mutex is still held.
- Don't wake up readers on a pipe if there was already data in it
when we added more.
- Don't wake up writers on a pipe if the ring wasn't full before we
removed a buffer"
* tag 'notifications-pipe-prep-
20191115' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
pipe: Remove sync on wake_ups
pipe: Increase the writer-wakeup threshold to reduce context-switch count
pipe: Check for ring full inside of the spinlock in pipe_write()
pipe: Remove redundant wakeup from pipe_write()
pipe: Rearrange sequence in pipe_write() to preallocate slot
pipe: Conditionalise wakeup in pipe_read()
pipe: Advance tail pointer inside of wait spinlock in pipe_read()
pipe: Allow pipes to have kernel-reserved slots
pipe: Use head and tail pointers for the ring, not cursor and length
Add wake_up_interruptible_sync_poll_locked()
Remove the nr_exclusive argument from __wake_up_sync_key()
pipe: Reduce #inclusion of pipe_fs_i.h
Linus Torvalds [Sat, 30 Nov 2019 19:34:33 +0000 (11:34 -0800)]
Merge tag 'fsnotify_for_v5.5-rc1' of git://git./linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"Three fsnotify cleanups"
* tag 'fsnotify_for_v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: Add git tree reference to MAINTAINERS
fsnotify/fdinfo: exportfs_encode_inode_fh() takes pointer as 4th argument
fsnotify: move declaration of fsnotify_mark_connector_cachep to fsnotify.h
Linus Torvalds [Sat, 30 Nov 2019 19:16:07 +0000 (11:16 -0800)]
Merge tag 'for_v5.5-rc1' of git://git./linux/kernel/git/jack/linux-fs
Pull ext2, quota, reiserfs cleanups and fixes from Jan Kara:
- Refactor the quota on/off kernel internal interfaces (mostly for
ubifs quota support as ubifs does not want to have inodes holding
quota information)
- A few other small quota fixes and cleanups
- Various small ext2 fixes and cleanups
- Reiserfs xattr fix and one cleanup
* tag 'for_v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (28 commits)
ext2: code cleanup for descriptor_loc()
fs/quota: handle overflows of sysctl fs.quota.* and report as unsigned long
ext2: fix improper function comment
ext2: code cleanup for ext2_try_to_allocate()
ext2: skip unnecessary operations in ext2_try_to_allocate()
ext2: Simplify initialization in ext2_try_to_allocate()
ext2: code cleanup by calling ext2_group_last_block_no()
ext2: introduce new helper ext2_group_last_block_no()
reiserfs: replace open-coded atomic_dec_and_mutex_lock()
ext2: check err when partial != NULL
quota: Handle quotas without quota inodes in dquot_get_state()
quota: Make dquot_disable() work without quota inodes
quota: Drop dquot_enable()
fs: Use dquot_load_quota_inode() from filesystems
quota: Rename vfs_load_quota_inode() to dquot_load_quota_inode()
quota: Simplify dquot_resume()
quota: Factor out setup of quota inode
quota: Check that quota is not dirty before release
quota: fix livelock in dquot_writeback_dquots
ext2: don't set *count in the case of failure in ext2_try_to_allocate()
...
Linus Torvalds [Sat, 30 Nov 2019 19:13:33 +0000 (11:13 -0800)]
Merge tag 'erofs-for-5.5-rc1' of git://git./linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"No major kernel updates for this round since I'm fully diving into
LZMA algorithm internals now to provide high CR XZ algorihm support.
That needs more work and time for me to get a better compression time.
Summary:
- Introduce superblock checksum support
- Set iowait when waiting I/O for sync decompression path
- Several code cleanups"
* tag 'erofs-for-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: remove unnecessary output in erofs_show_options()
erofs: drop all vle annotations for runtime names
erofs: support superblock checksum
erofs: set iowait for sync decompression
erofs: clean up decompress queue stuffs
erofs: get rid of __stagingpage_alloc helper
erofs: remove dead code since managed cache is now built-in
erofs: clean up collection handling routines
Linus Torvalds [Sat, 30 Nov 2019 19:10:39 +0000 (11:10 -0800)]
Merge tag '5.5-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
"Various smb3 fixes (including 12 for stable) and also features
(addition of multichannel support)"
* tag '5.5-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (41 commits)
CIFS: fix a white space issue in cifs_get_inode_info()
cifs: update internal module version number
cifs: Always update signing key of first channel
cifs: Fix retrieval of DFS referrals in cifs_mount()
cifs: Fix potential softlockups while refreshing DFS cache
cifs: Fix lookup of root ses in DFS referral cache
cifs: Fix use-after-free bug in cifs_reconnect()
cifs: dump channel info in DebugData
smb3: dump in_send and num_waiters stats counters by default
cifs: try harder to open new channels
CIFS: Properly process SMB3 lease breaks
cifs: move cifsFileInfo_put logic into a work-queue
cifs: try opening channels after mounting
CIFS: refactor cifs_get_inode_info()
cifs: switch servers depending on binding state
cifs: add server param
cifs: add multichannel mount options and data structs
cifs: sort interface list by speed
CIFS: Fix SMB2 oplock break processing
cifs: don't use 'pre:' for MODULE_SOFTDEP
...
Linus Torvalds [Sat, 30 Nov 2019 19:02:30 +0000 (11:02 -0800)]
Merge tag 'f2fs-for-5.5' of git://git./linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've introduced fairly small number of patches as below.
Enhancements:
- improve the in-place-update IO flow
- allocate segment to guarantee no GC for pinned files
Bug fixes:
- fix updatetime in lazytime mode
- potential memory leak in f2fs_listxattr
- record parent inode number in rename2 correctly
- fix deadlock in f2fs_gc along with atomic writes
- avoid needless data migration in GC"
* tag 'f2fs-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: stop GC when the victim becomes fully valid
f2fs: expose main_blkaddr in sysfs
f2fs: choose hardlimit when softlimit is larger than hardlimit in f2fs_statfs_project()
f2fs: Fix deadlock in f2fs_gc() context during atomic files handling
f2fs: show f2fs instance in printk_ratelimited
f2fs: fix potential overflow
f2fs: fix to update dir's i_pino during cross_rename
f2fs: support aligned pinned file
f2fs: avoid kernel panic on corruption test
f2fs: fix wrong description in document
f2fs: cache global IPU bio
f2fs: fix to avoid memory leakage in f2fs_listxattr
f2fs: check total_segments from devices in raw_super
f2fs: update multi-dev metadata in resize_fs
f2fs: mark recovery flag correctly in read_raw_super_block()
f2fs: fix to update time in lazytime mode
Linus Torvalds [Sat, 30 Nov 2019 18:57:22 +0000 (10:57 -0800)]
Merge tag 'afs-next-
20191121' of git://git./linux/kernel/git/dhowells/linux-fs
Pull AFS updates from David Howells:
"Minor cleanups and fix:
- Minor fix to make some debugging statements display information
from the correct iov_iter.
- Rename some members and variables to make things more obvious or
consistent.
- Provide a helper to wrap increments of the usage count on the
afs_read struct.
- Use scnprintf() to print into a stack buffer rather than sprintf().
- Remove some set but unused variables"
* tag 'afs-next-
20191121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Remove set but not used variable 'ret'
afs: Remove set but not used variables 'before', 'after'
afs: xattr: use scnprintf
afs: Introduce an afs_get_read() refcount helper
afs: Rename desc -> req in afs_fetch_data()
afs: Switch the naming of call->iter and call->_iter
afs: Use call->_iter not &call->iter in debugging statements
Linus Torvalds [Sat, 30 Nov 2019 18:53:02 +0000 (10:53 -0800)]
Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"This merge window saw the the following new featuers added to ext4:
- Direct I/O via iomap (required the iomap-for-next branch from
Darrick as a prereq).
- Support for using dioread-nolock where the block size < page size.
- Support for encryption for file systems where the block size < page
size.
- Rework of journal credits handling so a revoke-heavy workload will
not cause the journal to run out of space.
- Replace bit-spinlocks with spinlocks in jbd2
Also included were some bug fixes and cleanups, mostly to clean up
corner cases from fuzzed file systems and error path handling"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (59 commits)
ext4: work around deleting a file with i_nlink == 0 safely
ext4: add more paranoia checking in ext4_expand_extra_isize handling
jbd2: make jbd2_handle_buffer_credits() handle reserved handles
ext4: fix a bug in ext4_wait_for_tail_page_commit
ext4: bio_alloc with __GFP_DIRECT_RECLAIM never fails
ext4: code cleanup for get_next_id
ext4: fix leak of quota reservations
ext4: remove unused variable warning in parse_options()
ext4: Enable encryption for subpage-sized blocks
fs/buffer.c: support fscrypt in block_read_full_page()
ext4: Add error handling for io_end_vec struct allocation
jbd2: Fine tune estimate of necessary descriptor blocks
jbd2: Provide trace event for handle restarts
ext4: Reserve revoke credits for freed blocks
jbd2: Make credit checking more strict
jbd2: Rename h_buffer_credits to h_total_credits
jbd2: Reserve space for revoke descriptor blocks
jbd2: Drop jbd2_space_needed()
jbd2: Account descriptor blocks into t_outstanding_credits
jbd2: Factor out common parts of stopping and restarting a handle
...
Linus Torvalds [Sat, 30 Nov 2019 18:48:24 +0000 (10:48 -0800)]
Merge tag 'vfs-5.5-merge-1' of git://git./fs/xfs/xfs-linux
Pull splice fix from Darrick Wong:
"Fix another place in the splice code where a pipe could ask a
filesystem for a longer read than the pipe actually has free buffer
space"
* tag 'vfs-5.5-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
splice: only read in as much information as there is pipe buffer space
Linus Torvalds [Sat, 30 Nov 2019 18:44:49 +0000 (10:44 -0800)]
Merge tag 'iomap-5.5-merge-11' of git://git./fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"In this release, we hoisted as much of XFS' writeback code into iomap
as was practicable, refactored the unshare file data function, added
the ability to perform buffered io copy on write, and tweaked various
parts of the directio implementation as needed to port ext4's directio
code (that will be a separate pull).
Summary:
- Make iomap_dio_rw callers explicitly tell us if they want us to
wait
- Port the xfs writeback code to iomap to complete the buffered io
library functions
- Refactor the unshare code to share common pieces
- Add support for performing copy on write with buffered writes
- Other minor fixes
- Fix unchecked return in iomap_bmap
- Fix a type casting bug in a ternary statement in
iomap_dio_bio_actor
- Improve tracepoints for easier diagnostic ability
- Fix pipe page leakage in directio reads"
* tag 'iomap-5.5-merge-11' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (31 commits)
iomap: Fix pipe page leakage during splicing
iomap: trace iomap_appply results
iomap: fix return value of iomap_dio_bio_actor on 32bit systems
iomap: iomap_bmap should check iomap_apply return value
iomap: Fix overflow in iomap_page_mkwrite
fs/iomap: remove redundant check in iomap_dio_rw()
iomap: use a srcmap for a read-modify-write I/O
iomap: renumber IOMAP_HOLE to 0
iomap: use write_begin to read pages to unshare
iomap: move the zeroing case out of iomap_read_page_sync
iomap: ignore non-shared or non-data blocks in xfs_file_dirty
iomap: always use AOP_FLAG_NOFS in iomap_write_begin
iomap: remove the unused iomap argument to __iomap_write_end
iomap: better document the IOMAP_F_* flags
iomap: enhance writeback error message
iomap: pass a struct page to iomap_finish_page_writeback
iomap: cleanup iomap_ioend_compare
iomap: move struct iomap_page out of iomap.h
iomap: warn on inline maps in iomap_writepage_map
iomap: lift the xfs writeback code to iomap
...
Bjorn Andersson [Sat, 30 Nov 2019 18:34:36 +0000 (10:34 -0800)]
Revert "dt-bindings: remoteproc: stm32: add wakeup-source"
The DeviceTree binding document was converted to YAML in a patch that
is being merged through the devicetree tree, as such this patch needs to
be rewritten and is currently cause for a merge conflict.
This reverts commit
14ea1d04ed0f7bae60951bdb8eeaa55cdbb26c73.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Linus Torvalds [Sat, 30 Nov 2019 18:33:14 +0000 (10:33 -0800)]
Merge tag 'for-linus-hmm' of git://git./linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"This is another round of bug fixing and cleanup. This time the focus
is on the driver pattern to use mmu notifiers to monitor a VA range.
This code is lifted out of many drivers and hmm_mirror directly into
the mmu_notifier core and written using the best ideas from all the
driver implementations.
This removes many bugs from the drivers and has a very pleasing
diffstat. More drivers can still be converted, but that is for another
cycle.
- A shared branch with RDMA reworking the RDMA ODP implementation
- New mmu_interval_notifier API. This is focused on the use case of
monitoring a VA and simplifies the process for drivers
- A common seq-count locking scheme built into the
mmu_interval_notifier API usable by drivers that call
get_user_pages() or hmm_range_fault() with the VA range
- Conversion of mlx5 ODP, hfi1, radeon, nouveau, AMD GPU, and Xen
GntDev drivers to the new API. This deletes a lot of wonky driver
code.
- Two improvements for hmm_range_fault(), from testing done by Ralph"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
mm/hmm: remove hmm_range_dma_map and hmm_range_dma_unmap
mm/hmm: make full use of walk_page_range()
xen/gntdev: use mmu_interval_notifier_insert
mm/hmm: remove hmm_mirror and related
drm/amdgpu: Use mmu_interval_notifier instead of hmm_mirror
drm/amdgpu: Use mmu_interval_insert instead of hmm_mirror
drm/amdgpu: Call find_vma under mmap_sem
nouveau: use mmu_interval_notifier instead of hmm_mirror
nouveau: use mmu_notifier directly for invalidate_range_start
drm/radeon: use mmu_interval_notifier_insert
RDMA/hfi1: Use mmu_interval_notifier_insert for user_exp_rcv
RDMA/odp: Use mmu_interval_notifier_insert()
mm/hmm: define the pre-processor related parts of hmm.h even if disabled
mm/hmm: allow hmm_range to be used with a mmu_interval_notifier or hmm_mirror
mm/mmu_notifier: add an interval tree notifier
mm/mmu_notifier: define the header pre-processor parts even if disabled
mm/hmm: allow snapshot of the special zero page
Linus Torvalds [Sat, 30 Nov 2019 17:38:11 +0000 (09:38 -0800)]
Merge tag 'drm-vmwgfx-coherent-2019-11-29' of git://anongit.freedesktop.org/drm/drm
Pull drm coherent memory support for vmwgfx from Dave Airlie:
"This is a separate pull for the mm pagewalking + drm/vmwgfx work
Thomas did and you were involved in, I've left it separate in case you
don't feel as comfortable with it as the other stuff.
It has mm acks/r-b in the right places from what I can see"
* tag 'drm-vmwgfx-coherent-2019-11-29' of git://anongit.freedesktop.org/drm/drm:
drm/vmwgfx: Add surface dirty-tracking callbacks
drm/vmwgfx: Implement an infrastructure for read-coherent resources
drm/vmwgfx: Use an RBtree instead of linked list for MOB resources
drm/vmwgfx: Implement an infrastructure for write-coherent resources
mm: Add write-protect and clean utilities for address space ranges
mm: Add a walk_page_mapping() function to the pagewalk code
mm: pagewalk: Take the pagetable lock in walk_pte_range()
mm: Remove BUG_ON mmap_sem not held from xxx_trans_huge_lock()
drm/ttm: Convert vm callbacks to helpers
drm/ttm: Remove explicit typecasts of vm_private_data
Jiri Kosina [Fri, 29 Nov 2019 19:39:21 +0000 (20:39 +0100)]
Merge branch 'for-5.5/whiskers' into for-linus
- robustification of tablet mode support in google-whiskers
driver (Dmitry Torokhov)
Jiri Kosina [Fri, 29 Nov 2019 19:37:55 +0000 (20:37 +0100)]
Merge branch 'for-5.5/logitech' into for-linus
- Support for Logitech G15 (Hans de Goede)
- silencing of non-informative error flow in dmesg from
logitechi-hiddpp (Hans de Goede)
Jiri Kosina [Fri, 29 Nov 2019 19:37:10 +0000 (20:37 +0100)]
Merge branch 'for-5.5/ish' into for-linus
- typo fix (Geert Uytterhoeven)
Jiri Kosina [Fri, 29 Nov 2019 19:36:45 +0000 (20:36 +0100)]
Merge branch 'for-5.5/i2c' into for-linus
- removal of superfluous delay (You-Sheng Yang)
Jiri Kosina [Fri, 29 Nov 2019 19:36:00 +0000 (20:36 +0100)]
Merge branch 'for-5.5/hidraw' into for-linus
- printk() -> pr_*() cleanup (Rishi Gupta)
Jiri Kosina [Fri, 29 Nov 2019 19:34:28 +0000 (20:34 +0100)]
Merge branch 'for-5.5/core' into for-linus
- hid_have_special_driver[] cleanup for LED devices (Heiner Kallweit)
- HID parser improvements (Blaž Hrastnik, Candle Sun)
Jens Axboe [Fri, 29 Nov 2019 17:14:00 +0000 (10:14 -0700)]
io_uring: fix missing kmap() declaration on powerpc
Christophe reports that current master fails building on powerpc with
this error:
CC fs/io_uring.o
fs/io_uring.c: In function ‘loop_rw_iter’:
fs/io_uring.c:1628:21: error: implicit declaration of function ‘kmap’
[-Werror=implicit-function-declaration]
iovec.iov_base = kmap(iter->bvec->bv_page)
^
fs/io_uring.c:1628:19: warning: assignment makes pointer from integer
without a cast [-Wint-conversion]
iovec.iov_base = kmap(iter->bvec->bv_page)
^
fs/io_uring.c:1643:4: error: implicit declaration of function ‘kunmap’
[-Werror=implicit-function-declaration]
kunmap(iter->bvec->bv_page);
^
which is caused by a missing highmem.h include. Fix it by including
it.
Fixes:
311ae9e159d8 ("io_uring: fix dead-hung for non-iter fixed rw")
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christophe Leroy [Thu, 28 Nov 2019 07:59:22 +0000 (07:59 +0000)]
powerpc/fixmap: fix crash with HIGHMEM
Commit
f2bb86937d86 ("powerpc/fixmap: don't clear fixmap area in
paging_init()") removed the clearing of fixmap area in order to
avoid clearing fixmapped areas set earlier.
However unlike all other users of fixmap which use __set_fixmap(),
HIGHMEM functions directly use __set_pte_at(). This means
the page table must pre-exist, otherwise the following crash
can be encoutered due to the lack of entry in the PGD.
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=4K MMU=Hash PowerMac
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.0+ #2528
NIP:
c0144ce8 LR:
c0144ccc CTR:
00000080
REGS:
ef0b5aa0 TRAP: 0300 Not tainted (5.4.0+)
MSR:
00009032 <EE,ME,IR,DR,RI> CR:
44282842 XER:
00000000
DAR:
fffdf000 DSISR:
42000000
GPR00:
c0144ccc ef0b5b58 ef0b0000 fffdf000 fffdf000 00000000 c0000f7c 00000000
GPR08:
c0833000 fffdf000 00000000 ef1c53c9 24042842 00000000 00000000 00000000
GPR16:
00000000 00000000 ef7e7358 effe8160 00000000 c08a9660 c0851644 00000004
GPR24:
c08c70a8 00002dc2 00000000 00000001 00000201 effe8160 effe8160 00000000
NIP [
c0144ce8] prep_new_page+0x138/0x178
LR [
c0144ccc] prep_new_page+0x11c/0x178
Call Trace:
[
ef0b5b58] [
c0144ccc] prep_new_page+0x11c/0x178 (unreliable)
[
ef0b5b88] [
c0147218] get_page_from_freelist+0x1fc/0xd88
[
ef0b5c38] [
c0148328] __alloc_pages_nodemask+0xd4/0xbb4
[
ef0b5cf8] [
c0142ba8] __vmalloc_node_range+0x1b4/0x2e0
[
ef0b5d38] [
c0142dd0] vzalloc+0x48/0x58
[
ef0b5d58] [
c0301c8c] check_partition+0x58/0x244
[
ef0b5d78] [
c02ffe80] blk_add_partitions+0x44/0x2cc
[
ef0b5db8] [
c01a32d8] bdev_disk_changed+0x68/0xfc
[
ef0b5de8] [
c01a4494] __blkdev_get+0x290/0x460
[
ef0b5e28] [
c02fdd40] __device_add_disk+0x480/0x4d8
[
ef0b5e68] [
c0810688] brd_init+0xc0/0x188
[
ef0b5e88] [
c0005194] do_one_initcall+0x40/0x19c
[
ef0b5ee8] [
c07dd4dc] kernel_init_freeable+0x164/0x230
[
ef0b5f28] [
c0005408] kernel_init+0x18/0x10c
[
ef0b5f38] [
c0014274] ret_from_kernel_thread+0x14/0x1c
Partially revert that commit to still clear the fixmap area dedicated
to HIGHMEM.
Fixes:
f2bb86937d86 ("powerpc/fixmap: don't clear fixmap area in paging_init()")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d42fa9747df5afa41e67b08e374c98d3b40529c9.1574927918.git.christophe.leroy@c-s.fr
YueHaibing [Fri, 15 Nov 2019 13:08:30 +0000 (21:08 +0800)]
x86/efi: remove unused variables
commit
ad723674d675 ("x86/efi: move common keyring handler functions
to new file") leave this unused.
Fixes:
ad723674d675 ("x86/efi: move common keyring handler functions to new file")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20191115130830.13320-1-yuehaibing@huawei.com
Srinivas Pandruvada [Thu, 28 Nov 2019 15:08:24 +0000 (07:08 -0800)]
x86/mce/therm_throt: Mask out read-only and reserved MSR bits
While writing to MSR IA32_THERM_STATUS/IA32_PKG_THERM_STATUS, avoid
writing 1 to read only and reserved fields because updating some fields
generates exception.
[ bp: Vertically align for better readability. ]
Fixes:
f6656208f04e ("x86/mce/therm_throt: Optimize notifications of thermal throttle")
Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Tested-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191128150824.22413-1-srinivas.pandruvada@linux.intel.com
Linus Torvalds [Thu, 28 Nov 2019 19:16:43 +0000 (11:16 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- improve dma-debug scalability (Eric Dumazet)
- tiny dma-debug cleanup (Dan Carpenter)
- check for vmap memory in dma_map_single (Kees Cook)
- check for dma_addr_t overflows in dma-direct when using DMA offsets
(Nicolas Saenz Julienne)
- switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas
Saenz Julienne)
- fix arm-nommu dma-ranges handling (Vladimir Murzin)
- use __initdata in CMA (Shyam Saini)
- replace the bus dma mask with a limit (Nicolas Saenz Julienne)
- merge the remapping helpers into the main dma-direct flow (me)
- switch xtensa to the generic dma remap handling (me)
- various cleanups around dma_capable (me)
- remove unused dev arguments to various dma-noncoherent helpers (me)
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux:
* tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits)
dma-mapping: treat dev->bus_dma_mask as a DMA limit
dma-direct: exclude dma_direct_map_resource from the min_low_pfn check
dma-direct: don't check swiotlb=force in dma_direct_map_resource
dma-debug: clean up put_hash_bucket()
powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys
dma-direct: avoid a forward declaration for phys_to_dma
dma-direct: unify the dma_capable definitions
dma-mapping: drop the dev argument to arch_sync_dma_for_*
x86/PCI: sta2x11: use default DMA address translation
dma-direct: check for overflows on 32 bit DMA addresses
dma-debug: increase HASH_SIZE
dma-debug: reorder struct dma_debug_entry fields
xtensa: use the generic uncached segment support
dma-mapping: merge the generic remapping helpers into dma-direct
dma-direct: provide mmap and get_sgtable method overrides
dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages
dma-direct: remove __dma_direct_free_pages
usb: core: Remove redundant vmap checks
kernel: dma-contiguous: mark CMA parameters __initdata/__initconst
dma-debug: add a schedule point in debug_dma_dump_mappings()
...
Linus Torvalds [Thu, 28 Nov 2019 18:57:12 +0000 (10:57 -0800)]
Merge tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap
Pull generic ioremap support from Christoph Hellwig:
"This adds the remaining bits for an entirely generic ioremap and
iounmap to lib/ioremap.c. To facilitate that, it cleans up the giant
mess of weird ioremap variants we had with no users outside the arch
code.
For now just the three newest ports use the code, but there is more
than a handful others that can be converted without too much work.
Summary:
- clean up various obsolete ioremap and iounmap variants
- add a new generic ioremap implementation and switch csky, nds32 and
riscv over to it"
* tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap: (21 commits)
nds32: use generic ioremap
csky: use generic ioremap
csky: remove ioremap_cache
riscv: use the generic ioremap code
lib: provide a simple generic ioremap implementation
sh: remove __iounmap
nios2: remove __iounmap
hexagon: remove __iounmap
m68k: rename __iounmap and mark it static
arch: rely on asm-generic/io.h for default ioremap_* definitions
asm-generic: don't provide ioremap for CONFIG_MMU
asm-generic: ioremap_uc should behave the same with and without MMU
xtensa: clean up ioremap
x86: Clean up ioremap()
parisc: remove __ioremap
nios2: remove __ioremap
alpha: remove the unused __ioremap wrapper
hexagon: clean up ioremap
ia64: rename ioremap_nocache to ioremap_uc
unicore32: remove ioremap_cached
...
Linus Torvalds [Thu, 28 Nov 2019 18:43:39 +0000 (10:43 -0800)]
Merge tag 'for-5.5/io_uring-post-
20191128' of git://git.kernel.dk/linux-block
Pull more io_uring updates from Jens Axboe:
"As mentioned in the first pull request, there was a later batch as
well. This contains fixes to the stuff that already went in, cleanups,
and a few later additions. In particular, this contains:
- Cleanups/fixes/unification of the submission and completion path
(Pavel,me)
- Linked timeouts improvements (Pavel,me)
- Error path fixes (me)
- Fix lookup window where cancellations wouldn't work (me)
- Improve DRAIN support (Pavel)
- Fix backlog flushing -EBUSY on submit (me)
- Add support for connect(2) (me)
- Fix for non-iter based fixed IO (Pavel)
- creds inheritance for async workers (me)
- Disable cmsg/ancillary data for sendmsg/recvmsg (me)
- Shrink io_kiocb to 3 cachelines (me)
- NUMA fix for io-wq (Jann)"
* tag 'for-5.5/io_uring-post-
20191128' of git://git.kernel.dk/linux-block: (42 commits)
io_uring: make poll->wait dynamically allocated
io-wq: shrink io_wq_work a bit
io-wq: fix handling of NUMA node IDs
io_uring: use kzalloc instead of kcalloc for single-element allocations
io_uring: cleanup io_import_fixed()
io_uring: inline struct sqe_submit
io_uring: store timeout's sqe->off in proper place
net: disallow ancillary data for __sys_{send,recv}msg_file()
net: separate out the msghdr copy from ___sys_{send,recv}msg()
io_uring: remove superfluous check for sqe->off in io_accept()
io_uring: async workers should inherit the user creds
io-wq: have io_wq_create() take a 'data' argument
io_uring: fix dead-hung for non-iter fixed rw
io_uring: add support for IORING_OP_CONNECT
net: add __sys_connect_file() helper
io_uring: only return -EBUSY for submit on non-flushed backlog
io_uring: only !null ptr to io_issue_sqe()
io_uring: simplify io_req_link_next()
io_uring: pass only !null to io_req_find_next()
io_uring: remove io_free_req_find_next()
...
zhengbin [Thu, 28 Nov 2019 03:09:32 +0000 (11:09 +0800)]
ataflop: Remove unneeded semicolon
Fixes coccicheck warning:
drivers/block/ataflop.c:860:53-54: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
zhengbin [Thu, 28 Nov 2019 03:09:31 +0000 (11:09 +0800)]
block: sunvdc: Remove unneeded semicolon
Fixes coccicheck warning:
drivers/block/sunvdc.c:637:2-3: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
zhengbin [Thu, 28 Nov 2019 03:09:30 +0000 (11:09 +0800)]
drbd: Remove unneeded semicolon
Fixes coccicheck warning:
drivers/block/drbd/drbd_req.c:887:2-3: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Roman Penyaev [Thu, 28 Nov 2019 11:53:22 +0000 (12:53 +0100)]
io_uring: add mapping support for NOMMU archs
That is a bit weird scenario but I find it interesting to run fio loads
using LKL linux, where MMU is disabled. Probably other real archs which
run uClinux can also benefit from this patch.
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Wolfram Sang [Wed, 6 Nov 2019 09:50:23 +0000 (10:50 +0100)]
video: fbdev: matrox: convert to i2c_new_scanned_device
Move from the deprecated i2c_new_probed_device() to the new
i2c_new_scanned_device(). Make use of the new ERRPTR if suitable.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Wolfram Sang [Wed, 6 Nov 2019 09:50:20 +0000 (10:50 +0100)]
i2c: icy: convert to i2c_new_scanned_device
Move from the deprecated i2c_new_probed_device() to the new
i2c_new_scanned_device(). Make use of the new ERRPTR if suitable.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Max Staudt <max@enpas.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Wolfram Sang [Wed, 6 Nov 2019 09:50:19 +0000 (10:50 +0100)]
i2c: replace i2c_new_probed_device with an ERR_PTR variant
In the general move to have i2c_new_*_device functions which return
ERR_PTR instead of NULL, this patch converts i2c_new_probed_device().
There are only few users, so this patch converts the I2C core and all
users in one go. The function gets renamed to i2c_new_scanned_device()
so out-of-tree users will get a build failure to understand they need to
adapt their error checking code.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Max Staudt <max@enpas.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Rahul Tanwar [Thu, 28 Nov 2019 08:08:32 +0000 (16:08 +0800)]
pinctrl: Fix warning by adding missing MODULE_LICENSE
Fix below build warning
WARNING: modpost: missing MODULE_LICENSE() in
drivers/pinctrl/pinctrl-equilibrium.o
Introduced by commit
1948d5c51dba ("pinctrl: Add pinmux & GPIO controller driver for a new SoC")
by adding missing MODULE_LICENSE.
Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Link: https://lore.kernel.org/r/20191128080832.13529-2-rahul.tanwar@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Dave Airlie [Thu, 28 Nov 2019 02:39:50 +0000 (12:39 +1000)]
Merge branch 'vmwgfx-coherent' of git://people.freedesktop.org/~thomash/linux into drm-next
Graphics APIs like OpenGL 4.4 and Vulkan require the graphics driver
to provide coherent graphics memory, meaning that the GPU sees any
content written to the coherent memory on the next GPU operation that
touches that memory, and the CPU sees any content written by the GPU
to that memory immediately after any fence object trailing the GPU
operation is signaled.
Paravirtual drivers that otherwise require explicit synchronization
needs to do this by hooking up dirty tracking to pagefault handlers
and buffer object validation.
Provide mm helpers needed for this and that also allow for huge pmd-
and pud entries (patch 1-3), and the associated vmwgfx code (patch 4-7).
The code has been tested and exercised by a tailored version of mesa
where we disable all explicit synchronization and assume graphics memory
is coherent. The performance loss varies of course; a typical number is
around 5%.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas_os@shipmail.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113131639.4653-1-thomas_os@shipmail.org
Linus Torvalds [Thu, 28 Nov 2019 01:45:48 +0000 (17:45 -0800)]
Merge tag 'drm-next-2019-11-27' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Lots of stuff in here, though it hasn't been too insane this merge
apart from dealing with the security fun.
uapi:
- export different colorspace properties on DP vs HDMI
- new fourcc for ARM 16x16 block format
- syncobj: allow querying last submitted timeline value
- DRM_FORMAT_BIG_ENDIAN defined as unsigned
core:
- allow using gem vma manager in ttm
- connector/encoder/bridge doc fixes
- allow more than 3 encoders for a connector
- displayport mst suspend/resume reprobing support
- vram lazy unmapping, uniform vram mm and gem vram
- edid cleanups + AVI informframe bar info
- displayport helpers - dpcd parser added
dp_cec:
- Allow a connector to be associated with a cec device
ttm:
- pipelining with no_gpu_wait fix
- always keep BOs on the LRU
sched:
- allow free_job routine to sleep
i915:
- Block userptr from mappable GTT
- i915 perf uapi versioning
- OA stream dynamic reconfiguration
- make context persistence optional
- introduce DRM_I915_UNSTABLE Kconfig
- add fake lmem testing under unstable
- BT.2020 support for DP MSA
- struct mutex elimination
- Tigerlake display/PLL/power management improvements
- Jasper Lake PCH support
- refactor PMU for multiple GPUs
- Icelake firmware update
- Split out vga + switcheroo code
amdgpu:
- implement dma-buf import/export without helpers
- vega20 RAS enablement
- DC i2c over aux fixes
- renoir GPU reset
- DC HDCP support
- BACO support for CI/VI asics
- MSI-X support
- Arcturus EEPROM support
- Arcturus VCN encode support
- VCN dynamic powergating on RV/RV2
amdkfd:
- add navi12/14/renoir support to kfd
radeon:
- SI dpm fix ported from amdgpu
- fix bad DMA on ppc platforms
gma500:
- memory leak fixes
qxl:
- convert to new gem mmap
exynos:
- build warning fix
komeda:
- add aclk sysfs attribute
v3d:
- userspace cleanup uapi change
i810:
- fix for underflow in dispatch ioctls
ast:
- refactor show_cursor
mgag200:
- refactor show_cursor
arcgpu:
- encoder finding improvements
mediatek:
- mipi_tx, dsi and partial crtc support for MT8183 SoC
- rotation support
meson:
- add suspend/resume support
omap:
- misc refactors
tegra:
- DisplayPort support for Tegra 210, 186 and 194.
- IOMMU-backed DMA API fixes
panfrost:
- fix lockdep issue
- simplify devfreq integration
rcar-du:
- R8A774B1 SoC support
- fixes for H2 ES2.0
sun4i:
- vcc-dsi regulator support
virtio-gpu:
- vmexit vs spinlock fix
- move to gem shmem helpers
- handle large command buffers with cma"
* tag 'drm-next-2019-11-27' of git://anongit.freedesktop.org/drm/drm: (1855 commits)
drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10
drm/amdgpu: initialize vm_inv_eng0_sem for gfxhub and mmhub
drm/amd/amdgpu/sriov skip RLCG s/r list for arcturus VF.
drm/amd/amdgpu/sriov temporarily skip ras,dtm,hdcp for arcturus VF
drm/amdgpu/gfx10: re-init clear state buffer after gpu reset
merge fix for "ftrace: Rework event_create_dir()"
drm/amdgpu: Update Arcturus golden registers
drm/amdgpu/gfx10: fix out-of-bound mqd_backup array access
drm/amdgpu/gfx10: explicitly wait for cp idle after halt/unhalt
Revert "drm/amd/display: enable S/G for RAVEN chip"
drm/amdgpu: disable gfxoff on original raven
drm/amdgpu: remove experimental flag for Navi14
drm/amdgpu: disable gfxoff when using register read interface
drm/amdgpu/powerplay: properly set PP_GFXOFF_MASK (v2)
drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2
drm/radeon: fix bad DMA from INTERRUPT_CNTL2
drm/amd/display: Fix debugfs on MST connectors
drm/amdgpu/nv: add asic func for fetching vbios from rom directly
drm/amdgpu: put flush_delayed_work at first
drm/amdgpu/vcn2.5: fix the enc loop with hw fini
...
Linus Torvalds [Thu, 28 Nov 2019 01:17:40 +0000 (17:17 -0800)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
"This is mostly to fix the iwlwifi regression:
1) Flush GRO state properly in iwlwifi driver, from Alexander Lobakin.
2) Validate TIPC link name with properly length macro, from John
Rutherford.
3) Fix completion init and device query timeouts in ibmvnic, from
Thomas Falcon.
4) Fix SKB size calculation for netlink messages in psample, from
Nikolay Aleksandrov.
5) Similar kind of fix for OVS flow dumps, from Paolo Abeni.
6) Handle queue allocation failure unwind properly in gve driver, we
could try to release pages we didn't allocate. From Jeroen de
Borst.
7) Serialize TX queue SKB list accesses properly in mscc ocelot
driver. From Yangbo Lu"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net:
net: usb: aqc111: Use the correct style for SPDX License Identifier
net: phy: Use the correct style for SPDX License Identifier
net: wireless: intel: iwlwifi: fix GRO_NORMAL packet stalling
net: mscc: ocelot: use skb queue instead of skbs list
net: mscc: ocelot: avoid incorrect consuming in skbs list
gve: Fix the queue page list allocated pages count
net: inet_is_local_reserved_port() port arg should be unsigned short
openvswitch: fix flow command message size
net: phy: dp83869: Fix return paths to return proper values
net: psample: fix skb_over_panic
net: usbnet: Fix -Wcast-function-type
net: hso: Fix -Wcast-function-type
net: port < inet_prot_sock(net) --> inet_port_requires_bind_service(net, port)
ibmvnic: Serialize device queries
ibmvnic: Bound waits for device queries
ibmvnic: Terminate waiting device threads after loss of service
ibmvnic: Fix completion structure initialization
net-sctp: replace some sock_net(sk) with just 'net'
net: Fix a documentation bug wrt. ip_unprivileged_port_start
tipc: fix link name length check