OSDN Git Service
Kevin Hilman [Mon, 14 Oct 2013 20:52:59 +0000 (13:52 -0700)]
Merge branch 'renesas/dt2' into next/dt
From Simon Horman:
* renesas/dt2: (21 commits)
ARM: shmobile: bockw: fixup ether node naming
ARM: shmobile: r8a7779: add irqpin default status on DTSI
ARM: shmobile: marzen: fixup SMSC IRQ number on DTS
ARM: shmobile: bockw: add SMSC support on DTS
ARM: shmobile: r8a7778: add renesas_intc_irqpin support on DTSI
ARM: shmobile: r8a7791 SMP device tree node
ARM: shmobile: r8a7791 Arch timer device tree node
ARM: shmobile: r8a7791 IRQC device tree node
ARM: shmobile: armadillo800eva-reference: add SDHI and MMCIF interfaces
ARM: shmobile: armadillo-reference: Add PWM backlight node to DT
ARM: shmobile: r8a73a4: add a DT node for the DMAC
ARM: shmobile: r8a7790: add I2C DT nodes
ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards
ARM: shmobile: r8a7778: add usb phy power control function
ARM: shmobile: r8a7778: add USBHS clock
ARM: shmobile: r8a7791 CMT support
ARM: shmobile: r8a7791 SCIF support
ARM: shmobile: Initial r8a7791 SoC support
ARM: shmobile: r8a7778: add SSI/SRU clock support
ARM: shmobile: r8a7790: Add DU and LVDS clocks
...
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Kevin Hilman [Wed, 9 Oct 2013 21:11:03 +0000 (14:11 -0700)]
Merge tag 'dt-3.13-2' of git://git.infradead.org/linux-mvebu into next/dt
From Jason Cooper:
mvebu dt changes for v3.13 (round 2)
- kirkwood
- use MBus DT binding for setting up the windows
- move crypto and nand underneath the mbus node
- ib62x0 has a u-boot env partition
- mvebu
- add the Armada XP matrix board
* tag 'dt-3.13-2' of git://git.infradead.org/linux-mvebu:
arm: mvebu: add support for the Armada XP Matrix board
ARM: kirkwood: ib62x0: add u-boot environment partition
ARM: kirkwood: Move the nand node under the mbus node
ARM: kirkwood: Move the crypto node under the mbus node
ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Kevin Hilman [Wed, 9 Oct 2013 20:21:51 +0000 (13:21 -0700)]
Merge tag 'dt-3.13' of git://git.infradead.org/linux-mvebu into next/dt
From Jason Cooper:
mvebu dt changes for v3.13
- mvebu
- add MSI
- new compatible string for mv64xxx-i2c
- dove
- use the pre-processor
- define the MBus nodes
- add PCIe controllers
- add Globalscale D3Plug
- relocate internal registers nodes
* tag 'dt-3.13' of git://git.infradead.org/linux-mvebu:
ARM: dove: add initial DT file for Globalscale D3Plug
ARM: dove: add PCIe controllers to SoC DT
ARM: dove: relocate internal registers device nodes
ARM: dove: add MBus DT node
ARM: dove: add MBUS_ID macro to Dove DT
ARM: dove: use preprocessor on device tree files
ARM: mvebu: link PCIe controllers to the MSI controller
ARM: mvebu: the MPIC now provides MSI controller features
ARM: dts: mvebu: Update with the new compatible string for mv64xxx-i2c
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Kuninori Morimoto [Fri, 4 Oct 2013 01:20:19 +0000 (18:20 -0700)]
ARM: shmobile: bockw: fixup ether node naming
According to the ePAPR spec,
the node name should be "ethernet", not "lan0".
Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Wed, 2 Oct 2013 08:39:13 +0000 (01:39 -0700)]
ARM: shmobile: r8a7779: add irqpin default status on DTSI
r8a7779 INTC needs IRL pin mode settings to determine
behavior of IRQ0 - IRQ3. But it depends on platform.
This patch adds status = "disabled" on r8a7779.dtsi as default
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Wed, 2 Oct 2013 08:40:20 +0000 (01:40 -0700)]
ARM: shmobile: marzen: fixup SMSC IRQ number on DTS
This patch fixup miss-setting of SMSC IRQ number.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Wed, 2 Oct 2013 08:34:07 +0000 (01:34 -0700)]
ARM: shmobile: bockw: add SMSC support on DTS
This patch enables INTC IRQ and SMSC on BockW board via DT.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Wed, 2 Oct 2013 08:32:12 +0000 (01:32 -0700)]
ARM: shmobile: r8a7778: add renesas_intc_irqpin support on DTSI
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Tue, 1 Oct 2013 08:13:07 +0000 (17:13 +0900)]
ARM: shmobile: r8a7791 SMP device tree node
Add a device node for the r8a7791 secondary CPU core.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Tue, 1 Oct 2013 08:12:38 +0000 (17:12 +0900)]
ARM: shmobile: r8a7791 Arch timer device tree node
Add r8a7791 arch timer device tree information.
This needs to be used together with r8a7791 support
code that ties in the R-Car Gen2 arch timer workarounds.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Tue, 1 Oct 2013 08:12:29 +0000 (17:12 +0900)]
ARM: shmobile: r8a7791 IRQC device tree node
Enable a r8a7791 IRQC block by adding a device tree
node for the IRQC hardware and pins IRQ0 to IRQ9.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Guennadi Liakhovetski [Fri, 27 Sep 2013 08:02:57 +0000 (10:02 +0200)]
ARM: shmobile: armadillo800eva-reference: add SDHI and MMCIF interfaces
Add SDHI0 and MMCIF interfaces to armadillo800eva-reference with
regulators and pin configurations. SDHI1 is not added yet, because the
switch, that connects the interface either to an SD slot or to a WiFi
SDIO card cannot be described in DT yet.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 11 Sep 2013 11:51:13 +0000 (13:51 +0200)]
ARM: shmobile: armadillo-reference: Add PWM backlight node to DT
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Guennadi Liakhovetski [Thu, 26 Sep 2013 17:30:03 +0000 (19:30 +0200)]
ARM: shmobile: r8a73a4: add a DT node for the DMAC
Add a DT node for the only system DMAC instance on r8a73a4. The RT DMAC
can be added later under the same multiplexer, because they can serve the
same slaves and use the same MID-RID values. Configuration data is
supplied to the driver, using a compatibility match string.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Guennadi Liakhovetski [Thu, 26 Sep 2013 17:20:58 +0000 (19:20 +0200)]
ARM: shmobile: r8a7790: add I2C DT nodes
Add DT nodes for the four I2C interfacces on r8a7790.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Guennadi Liakhovetski [Thu, 26 Sep 2013 11:06:01 +0000 (13:06 +0200)]
ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards
Currently all I2C interfaces in all *.dtsi files for various Renesas SoCs
are enabled by default. Switch them all off and only enable populated I2C
interfaces in board-specific *.dts files.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Tue, 8 Oct 2013 00:24:24 +0000 (09:24 +0900)]
Merge tag 'renesas-soc-for-v3.13' into dt2-base
Renesas ARM based SoC updates for v3.13
* Add support for r8a7791 SoC
* Rename DU device in clock lookups list of r8a7779 SoC
* USB and SSI/SRU clock support for r8a7778 SoC
* USB phy power control function support for r8a7778 SoC
Olof Johansson [Mon, 7 Oct 2013 18:39:16 +0000 (11:39 -0700)]
Merge tag 'renesas-dt-for-v3.13' of git://git./linux/kernel/git/horms/renesas into next/dt
From Simon Horman:
Renesas ARM-based SoC DT updates for v3.13
* Add CPU cores to DTSI of r8a7790 SoC
* Add MMCIF and SDHI DT nodes for reference DTS of ape6evm board
* tag 'renesas-dt-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Add r8a7790 CA7 CPU cores to DTSI
ARM: shmobile: Add r8a7790 CA15 CPU cores
ARM: shmobile: ape6evm-reference: add MMCIF and SDHI DT nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 7 Oct 2013 17:23:39 +0000 (10:23 -0700)]
Merge tag 'ux500-devicetree-2' of git://git./linux/kernel/git/linusw/linux-stericsson into next/dt
From Linus Walleij:
Second part of the Ux500 devicetree conversion and ATAG
deletion: this fixes bugs discovered when switching to a
devicetree-only setup, primarily on the HREF prototypes.
The biggest change is to split into four DTS variants as
the UIB autodetection was lost.
* tag 'ux500-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS
ARM: ux500: register the tc35892 GPIO on the TVK UIB
ARM: ux500: split the HREF DTS files from two to four
ARM: ux500: split HREF UIB files
ARM: ux500: move TC35892 at 0x42 to hrefprev60
ARM: ux500: correct CD for micro SD on hrev60plus
ARM: ux500: fix proximity sensor button
ARM: ux500: correct I2C address of ambient light sensor
ARM: ux500 enable the AB8500 gpio for all HREFs
ARM: ux500: add default trigger on HREF LED
Signed-off-by: Olof Johansson <olof@lixom.net>
Thomas Petazzoni [Thu, 3 Oct 2013 14:35:26 +0000 (16:35 +0200)]
arm: mvebu: add support for the Armada XP Matrix board
The Armada XP Matrix board is the mother board of a more complex
system. The mother board uses an Armada XP MV78460, 4 serial ports, 2
SATA ports, one Ethernet connection, a PCIe port and a USB port. All
those devices are enabled in the Device Tree added by this patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Luka Perkov [Thu, 3 Oct 2013 03:06:45 +0000 (05:06 +0200)]
ARM: kirkwood: ib62x0: add u-boot environment partition
Also, add some trivial whitespace cleanup.
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Linus Walleij [Thu, 3 Oct 2013 08:29:24 +0000 (10:29 +0200)]
ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS
The BU21013 touchscreen GPIOs have been pretty confused, correct
them per board, and move the GPIO assignments up to the top
level DTS file so we can control it from there, and avoid defining
the GPIO assignments for non-ST UIB equipped boards.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Thu, 3 Oct 2013 08:18:36 +0000 (10:18 +0200)]
ARM: ux500: register the tc35892 GPIO on the TVK UIB
The TVK1281618 UIB has a TC35892 GPIO expander on it, which has
in the past probably been confused with the GPIO expander on the
older HREF plus previous to v60, which is on an entirely different
part of the system with another I2C address. Register the expander
in the right place.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Wed, 2 Oct 2013 13:42:59 +0000 (15:42 +0200)]
ARM: ux500: split the HREF DTS files from two to four
As the device tree conversion did away with the ability to
auto-detect the UIB (User Interface Board) version from attempting
to read an I2C address, we now have to pass the knowledge of
what UIB is mounted through the device tree. This gives rise
to four possible board permutations:
- HREF prior to v60, ST UIB (hrefprev60-stuib)
- HREF prior to v60, TVK1281618 UIB (hrefprev60-tvk)
- HREF v60 and later, ST UIB (href60plus-stuib)
- HREF v60 and later, TVK1281618 UIB (hrefv60plus-tvk)
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Thu, 26 Sep 2013 13:34:02 +0000 (15:34 +0200)]
ARM: ux500: split HREF UIB files
Create two different UIB (User Interface Board) include files: one per
UIB simply. The include files now only handle the devices on that
very UIB.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Wed, 2 Oct 2013 14:03:31 +0000 (16:03 +0200)]
ARM: ux500: move TC35892 at 0x42 to hrefprev60
The TC35892 was mounted as a GPIO expander on the HREF prior
to v60 and not in later versions, which instead use the Nomadik
GPIO directly, so move it over to the hrefprev60 DTS file.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Wed, 2 Oct 2013 14:12:52 +0000 (16:12 +0200)]
ARM: ux500: correct CD for micro SD on hrev60plus
This correct the card detect line for the HREF v60 and later
reference designs. This is connected directly to the Nomadik
GPIO block, line 95 at offset 31 on the third instance.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Wed, 2 Oct 2013 12:56:49 +0000 (14:56 +0200)]
ARM: ux500: fix proximity sensor button
The proximity sensor is connected to pin AH12 on newer HREFs,
that corresponds to pin offset 25 on gpio5, not gpio6.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Wed, 2 Oct 2013 11:40:09 +0000 (13:40 +0200)]
ARM: ux500: correct I2C address of ambient light sensor
The ambient light sensor is places at address 0x29 nothing else.
This patch makes the ambient light sensor probe again.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Jason Gunthorpe [Tue, 17 Sep 2013 18:44:33 +0000 (12:44 -0600)]
ARM: kirkwood: Move the nand node under the mbus node
There should be no nodes that are not children of the mbus. Move
the nand node under the mbus, and rework the board .dts files
to use an & reference to the nand node.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Jason Gunthorpe [Tue, 17 Sep 2013 18:43:09 +0000 (12:43 -0600)]
ARM: kirkwood: Move the crypto node under the mbus node
There should be no nodes that are not children of the mbus. Move
the crypto node under the mbus.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Jason Gunthorpe [Tue, 17 Sep 2013 18:41:46 +0000 (12:41 -0600)]
ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding
kirkwood_setup_wins is the last manual caller of mbus in kirkwood, don't
call it for DT boards and rely on the DT having a mbus node with
a proper ranges property to setup these windows.
Move all the mbus ranges properties for all boards into kirkwood.dtsi,
since they are currently all the same.
This makes the DT self consistent, since the physical address of the
NAND and CRYPTO are both referenced internally. The arbitary Linux
constants KIRKWOOD_NAND_MEM_PHYS_BASE and KIRKWOOD_SRAM_PHYS_BASE
no longer have to match the DT values.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Olof Johansson [Mon, 30 Sep 2013 16:09:05 +0000 (09:09 -0700)]
Merge branch 'ux500/dt' into next/dt
* ux500/dt:
ARM: ux500: enable appended dtb in u8500_defconfig
Olof Johansson [Mon, 30 Sep 2013 16:08:46 +0000 (09:08 -0700)]
Merge tag 'ux500-dt-for-v3.13-2' of git://git./linux/kernel/git/linusw/linux-stericsson into next/dt
From Linus Walleij:
This is a huge device tree and ATAG removal series for ux500:
- Move all the clock definitions over to the device tree
- Remove all now-redundant AUXDATA and make the ux500 device
tree only
* tag 'ux500-dt-for-v3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (92 commits)
ARM: ux500: delete devices-common remnants
clk: ux500: Provide a look-up for the ARMSS clock
ARM: ux500: Enable CPUFreq on Snowball
ARM: ux500: Provide a Device Tree node for CPUFreq in the DBx500
ARM: ux500: Provide a clock lookup for the Hash driver
ARM: ux500: Provide a clock lookup for the Crypto driver
ARM: ux500: Fix trivial white-space error in the DBX500 DTSI file
ARM: ux500: Remove ATAG booting support for Snowball
ARM: ux500: Remove ATAG booting support for HREF
ARM: ux500: Remove ATAG booting support for U8520
ARM: ux500: Remove ATAG booting support for MOP500
ARM: ux500: Purge UIB framework when booting with ATAGs
ARM: ux500: Take out STUIB support when not booting with Device Tree
ARM: ux500: Remove BU21013 ROHM TS support when booting with only ATAGs
ARM: ux500: Don't register the STMPE/SKE when booting with ATAG support
ARM: ux500: Delete U8500 UIB support when booting with ATAGs
ARM: ux500: Don't register Synaptics RMI4 TS when booting with ATAGs
ARM: ux500: Purge DB8500 PRCMU registration when not booting with DT
ARM: ux500: Stop requesting the SoC device to play 'parent' role
ARM: ux500: Remove UART support when booting without Device Tree
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 30 Sep 2013 16:08:07 +0000 (09:08 -0700)]
ARM: ux500: enable appended dtb in u8500_defconfig
Churns the rest of the file a bit due to reordering of options, but the
only changes are:
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
Signed-off-by: Olof Johansson <olof@lixom.net>
Sebastian Hesselbarth [Mon, 12 Aug 2013 18:46:54 +0000 (20:46 +0200)]
ARM: dove: add initial DT file for Globalscale D3Plug
This adds an initial DT file for the Globalscale D3Plug with Dove SoC.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Mon, 12 Aug 2013 18:46:53 +0000 (20:46 +0200)]
ARM: dove: add PCIe controllers to SoC DT
This adds a node for the pcie controllers found on Dove SoCs to the
SoC DT include.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Mon, 29 Jul 2013 12:31:53 +0000 (14:31 +0200)]
ARM: dove: relocate internal registers device nodes
With mbus node in place, now relocate all internal device nodes
to internal-regs node with proper address ranges.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Mon, 29 Jul 2013 12:31:52 +0000 (14:31 +0200)]
ARM: dove: add MBus DT node
This adds a MBus node including ranges and pcie apertures required later.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Mon, 29 Jul 2013 12:31:51 +0000 (14:31 +0200)]
ARM: dove: add MBUS_ID macro to Dove DT
This adds a macro used for defining address window's target ID and
attribute cells for the MBus ranges entry.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Sebastian Hesselbarth [Mon, 29 Jul 2013 12:31:50 +0000 (14:31 +0200)]
ARM: dove: use preprocessor on device tree files
This coverts Dove DT board files to preprocessor includes instead
of dtc includes.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 9 Aug 2013 20:27:15 +0000 (22:27 +0200)]
ARM: mvebu: link PCIe controllers to the MSI controller
This commit adjusts the Armada 370 and Armada XP PCIe controllers
Device Tree informations to reference their MSI controller. In the
case of this platform, the MSI controller is implemented by the MPIC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Daniel Price <daniel.price@gmail.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 9 Aug 2013 20:27:13 +0000 (22:27 +0200)]
ARM: mvebu: the MPIC now provides MSI controller features
Adds the 'msi-controller' property to the main interrupt controller
Device Tree node, to indicate that it can now behave as a MSI
controller.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Tested-by: Daniel Price <daniel.price@gmail.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Kuninori Morimoto [Mon, 5 Aug 2013 00:43:01 +0000 (17:43 -0700)]
ARM: shmobile: r8a7778: add usb phy power control function
USB phy initialisation function is needed from not only
USB Host but also USB Function too.
This patch adds usb phy common control function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Mon, 5 Aug 2013 00:43:19 +0000 (17:43 -0700)]
ARM: shmobile: r8a7778: add USBHS clock
This patch adds USBHS clock for renesas_usbhs driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 4 Sep 2013 03:46:17 +0000 (12:46 +0900)]
ARM: shmobile: r8a7791 CMT support
Add r8a7791 CMT support via channel 0 of CMT0. At this
point the CMT is used for clock event operation, but in
the future the arch timer will be the main timer and the
CMT will be used for deep sleep wake up only.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
a7663b88280d00359715817620798e99d54d401c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Yoshikazu Fujikawa [Wed, 4 Sep 2013 03:46:08 +0000 (12:46 +0900)]
ARM: shmobile: r8a7791 SCIF support
Add SCIF serial port support to the r8a7791 SoC by
adding platform devices for SCIFA0 -> SCIFA5 as well
as SCIFB0 -> SCIFB2 and SCIF0 -> SCIF5 together with
clock bindings. DT device description is excluded at
this point since such bindings are still under
development.
Signed-off-by: Yoshikazu Fujikawa <yoshikazu.fujikawa.ue@renesas.com>
Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com>
[damm@opensource.se: Forward ported to upstream, dropped holes in enum]
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Hisashi Nakamura [Wed, 4 Sep 2013 03:45:57 +0000 (12:45 +0900)]
ARM: shmobile: Initial r8a7791 SoC support
Add initial support for the r8a7791 SoC including:
- Single Cortex-A15 CPU Core
- GIC
No static virtual mappings are used, all the components
make use of ioremap(). DT_MACHINE_START is still wrapped
in CONFIG_USE_OF to match other mach-shmobile code.
Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com>
[damm@opensource.se: Forward ported to upstream, dropped not-yet-ready code]
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Sat, 14 Sep 2013 15:28:58 +0000 (00:28 +0900)]
ARM: shmobile: Add r8a7790 CA7 CPU cores to DTSI
Add r8a7790 Cortex-A7 CPU information to DTSI.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 28 Aug 2013 23:22:17 +0000 (08:22 +0900)]
ARM: shmobile: Add r8a7790 CA15 CPU cores
Add CA15 CPU cores to r8a7790 for a total of 4 x CA15.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Linus Walleij [Thu, 26 Sep 2013 13:09:14 +0000 (15:09 +0200)]
ARM: ux500 enable the AB8500 gpio for all HREFs
The AB8500 GPIO was only registered for the pre-v60 HREF but should
be made available on all HREF variants, move the DT entry to the
common file.
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Sun, 15 Sep 2013 10:01:07 +0000 (12:01 +0200)]
ARM: ux500: add default trigger on HREF LED
This adds a heartbeat on the first LED on the ux500 HREF
boards.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Thu, 26 Sep 2013 09:24:16 +0000 (11:24 +0200)]
ARM: ux500: delete devices-common remnants
commit
f1ff5b2549990b5de080b52e3313cbb30c218853
"ARM: ux500: Stop enabling GPIOs when not booting with Device Tree"
deleted devices-common.c, but did not delete the build
rule from Makefile (most likely due to compiling in
a dirty tree where the object file still existed so
linking would complete anyway).
Delete the makerule, the header file associated
with this file and the remaining reference to the header.
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 15:09:38 +0000 (16:09 +0100)]
clk: ux500: Provide a look-up for the ARMSS clock
The ARMSS clock is used by the newly DT enabled CPUFreq driver.
Cc: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 15:03:07 +0000 (16:03 +0100)]
ARM: ux500: Enable CPUFreq on Snowball
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 15:07:44 +0000 (16:07 +0100)]
ARM: ux500: Provide a Device Tree node for CPUFreq in the DBx500
This is required to fetch the ARMSS clock when booting with DT.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 15:07:27 +0000 (16:07 +0100)]
ARM: ux500: Provide a clock lookup for the Hash driver
The common clock framework will use the 'clock' property provided to do
a clock lookup when Device Tree is enabled.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 15:05:52 +0000 (16:05 +0100)]
ARM: ux500: Provide a clock lookup for the Crypto driver
The common clock framework will use the 'clock' property provided to do
a clock lookup when Device Tree is enabled.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 15:05:04 +0000 (16:05 +0100)]
ARM: ux500: Fix trivial white-space error in the DBX500 DTSI file
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:55:18 +0000 (14:55 +0100)]
ARM: ux500: Remove ATAG booting support for Snowball
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:54:47 +0000 (14:54 +0100)]
ARM: ux500: Remove ATAG booting support for HREF
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:54:19 +0000 (14:54 +0100)]
ARM: ux500: Remove ATAG booting support for U8520
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:53:46 +0000 (14:53 +0100)]
ARM: ux500: Remove ATAG booting support for MOP500
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:53:06 +0000 (14:53 +0100)]
ARM: ux500: Purge UIB framework when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Fri, 23 Aug 2013 08:56:47 +0000 (09:56 +0100)]
ARM: ux500: Take out STUIB support when not booting with Device Tree
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Fri, 23 Aug 2013 08:52:12 +0000 (09:52 +0100)]
ARM: ux500: Remove BU21013 ROHM TS support when booting with only ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Fri, 23 Aug 2013 08:39:05 +0000 (09:39 +0100)]
ARM: ux500: Don't register the STMPE/SKE when booting with ATAG support
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Fri, 23 Aug 2013 08:34:42 +0000 (09:34 +0100)]
ARM: ux500: Delete U8500 UIB support when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Fri, 23 Aug 2013 08:24:38 +0000 (09:24 +0100)]
ARM: ux500: Don't register Synaptics RMI4 TS when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Fri, 23 Aug 2013 08:19:01 +0000 (09:19 +0100)]
ARM: ux500: Purge DB8500 PRCMU registration when not booting with DT
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 22 Aug 2013 14:52:30 +0000 (15:52 +0100)]
ARM: ux500: Stop requesting the SoC device to play 'parent' role
There are no more devices which require left to register which require
a parent. This is part of the ux500 conversion over to Device Tree only
booting.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 22 Aug 2013 15:18:56 +0000 (16:18 +0100)]
ARM: ux500: Remove UART support when booting without Device Tree
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 22 Aug 2013 14:41:30 +0000 (15:41 +0100)]
ARM: ux500: Stop initialising the pinmaps when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 22 Aug 2013 13:58:29 +0000 (14:58 +0100)]
ARM: ux500: Rip out SSP/SPI registration when not booting with Device Tree
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 22 Aug 2013 12:28:12 +0000 (13:28 +0100)]
ARM: ux500: Do not register the PMU device if booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:50:59 +0000 (14:50 +0100)]
ARM: ux500: Deactivate enablement of DMA40 during ATAG booting
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:49:52 +0000 (14:49 +0100)]
ARM: ux500: Stop enabling GPIOs when not booting with Device Tree
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Fri, 23 Aug 2013 09:29:22 +0000 (10:29 +0100)]
ARM: ux500: Stop registering Pinctrl when booting with ATAG support
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 22 Aug 2013 13:54:30 +0000 (14:54 +0100)]
ARM: ux500: Purge support for registering the RTC when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:48:27 +0000 (14:48 +0100)]
ARM: ux500: Remove USB support when booting using ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 22 Aug 2013 11:10:48 +0000 (12:10 +0100)]
ARM: ux500: Rip out keypad initialisation which is no longer used
This is part of the ux500 conversion over to Device Tree only
booting, but this stuff haven't been used for years.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 21 Aug 2013 16:17:22 +0000 (17:17 +0100)]
ARM: ux500: Purge SDI support for ATAG booting
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 21 Aug 2013 14:59:51 +0000 (15:59 +0100)]
ARM: ux500: Remove I2C support when booting with ATAG support
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 21 Aug 2013 14:54:05 +0000 (15:54 +0100)]
ARM: ux500: Purge SFH7741 Proximity Sensor support when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:41:18 +0000 (14:41 +0100)]
ARM: ux500: Remove Light sensor Rohm BH1780GLI when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 14:11:25 +0000 (15:11 +0100)]
ARM: ux500: Remove TC35892 Flexible IO Expander when booting ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 21 Aug 2013 14:39:53 +0000 (15:39 +0100)]
ARM: ux500: Stop passing GPIO pdata when booitng with ATAGs enabled
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Thu, 22 Aug 2013 13:26:18 +0000 (14:26 +0100)]
ARM: ux500: Prevent CODEC platform data from being passed when booting ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:35:06 +0000 (14:35 +0100)]
ARM: ux500: Rip out Hash support when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 21 Aug 2013 14:19:18 +0000 (15:19 +0100)]
ARM: ux500: Deactivate Crypt support when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 21 Aug 2013 13:33:07 +0000 (14:33 +0100)]
ARM: ux500: Purge SDI regulator support when booting with ATAGs enable
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 19 Aug 2013 15:28:58 +0000 (16:28 +0100)]
ARM: ux500: Disable Snowball's CPUFreq functionality when booting with ATAGs enabled
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 19 Aug 2013 15:27:28 +0000 (16:27 +0100)]
ARM: ux500: Remove support for Snowball's Ethernet regulator when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 19 Aug 2013 14:46:25 +0000 (15:46 +0100)]
ARM: ux500: Disable Snowball's SMSC911x Ethernet when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 19 Aug 2013 14:42:17 +0000 (15:42 +0100)]
ARM: ux500: Purge support for Snowball user buttons when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Mon, 19 Aug 2013 13:38:44 +0000 (14:38 +0100)]
ARM: ux500: Remove ATAG booting support for Snowball's heatbeat LED
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:32:16 +0000 (14:32 +0100)]
ARM: ux500: Remove ATAG support for LP5521 Programmable Three-Channel LED driver
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 13:30:37 +0000 (14:30 +0100)]
ARM: ux500: Remove TPS61052 High Power White LED Driver ATAG support
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Tue, 13 Aug 2013 16:52:15 +0000 (17:52 +0100)]
ARM: ux500: Remove Audio/MSP support when booting with ATAGs
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lee Jones [Wed, 18 Sep 2013 12:38:50 +0000 (13:38 +0100)]
ARM: ux500: Remove SSP AUXDATA pertaining to DMA bindings
These are now cared for from the Device Tree.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>